Brochure - Convey-All USA by Hamilton Systems

CONVEY-ALL
®
Tube Conveyors - High Capacity
Transfer Conveyors
Page 2-5
Page 10
Low Profile Hoppers
Page 6&7
Tube Conveyors - Utility
Page 8&9
Drive Over Conveyors
Page 11
Rail Car Unloaders
Page 11
CST-C Commercial Seed Tender Page 12&13
CST Tenders
Page 14
BTS 290 Seed Tender
Page 15
BTS 405 Seed Tender
Page 16
WT290 Weigh Wagon
Page 17
Portable Seed Tanks & Surge Bins
Page 18
Mini Scale Tower
Page 19
Bulk Seed Systems & More
Stainless Steel
Page 24
Page 20-23
TCH Industrial Capacity 10” Tube Conveyors
TCH1090 swing out. Shown with
available hydraulic mover on
swing out.
CONVEY-ALL® TCH Conveyors
Positive drive system.
Non-Slip, self-tensioning.
Works in all conditions including
wet and frost. Automatically adjusts
to place only enough tension on the
belt to drive the load.
• Big capacity TCH 1000 series with 10” tube and 16”
belt conveys up to 5000 bu./hr. in cereals and 6500
bu./hr. with beans. Easily powered with a 30 hp
compact tractor.
• Lower power requirements. Because of less friction,
the conveyor uses less horsepower than conventional
methods. Generally about 20 - 50% less power is
required.
• Positive, non-slip, self-tensioning drive system.
• All undercarriages are heavy duty and built to last for
the life of the conveyor.
• Available in steel, stainless steel or steel tube with
stainless steel ends.
• End dump and swing out models. Swing models
available with hydraulic drive wheels on hopper for
automated positioning.
• 10” models in lengths to 90’.
Full tube = big capacity
F
or big capacity a conveyor needs 2 things - a full tube and a
positive, non-slip drive system. With Convey-Allʼs new TCH
models you get both for capacity that rivals any auger.
All TCH conveyors come with wider belts. The wider belts gently
wrap around the product being conveyed so there is less roll back,
the tube is fuller and capacity increases. A standard feature on all
10” and 14” TCH conveyors.
Page 2
• Very durable and efficient.
• Hydraulic scissor lift is standard on the larger units.
CONVEY-ALL®
TCH 1085 Self-Contained with 40 hp diesel.
5000 bu./hr. in cereals, 6500 bu./hr. in beans.
C
TCH 1000 Series
Length & Spout Height
Specifications
Operating Angle
The above TCH1085 is completely self-contained. It is shown with
the available diesel engine drive and self-propelled moving kit. Very
easy to position with hydraulic steering and hydraulic up and down
control of both ends.
Comes with a camera on the discharge end for easy positioning.
B
D
Operating
Angle
B
15º
TCH 1035
C
D
B
11ʼ4”
TCH 1045
C
47ʼ9”
D
24ʼ8”
B
14ʼ
TCH 1055
C
57ʼ5”
D
22ʼ6”
B
16ʼ 7”
TCH 1065
C
67ʼ 7”
D
32ʼ 2”
TCH 1070
B
C
17ʼ 10” 71ʼ 11”
D
37ʼ
TCH 1075
B
C
D
19ʼ 2” 76ʼ 9” 41ʼ 10”
B
21ʼ8”
TCH 1085
C
86ʼ4”
D
45ʼ1”
B
23ʼ
TCH 1090
C
91ʼ2”
D
49ʼ11”
20º
12ʼ
37ʼ1”
18ʼ11”
15ʼ5”
26ʼ6”
24ʼ2”
18ʼ11”
55ʼ11” 21ʼ10”
22ʼ 4”
65ʼ 4”
31ʼ 3”
24ʼ
70ʼ
35ʼ 11” 25ʼ 9” 74ʼ 8” 40ʼ 7”
29ʼ1”
84ʼ1”
43ʼ9”
30ʼ9”
88ʼ9”
48ʼ 5”
25º
15ʼ1”
35ʼ10”
17ʼ9”
19ʼ4”
44ʼ11”
23ʼ6”
23ʼ8”
53ʼ11”
21ʼ
27ʼ 11”
63ʼ
30ʼ 1”
30ʼ
67ʼ 6”
34ʼ 7”
32ʼ 2”
72ʼ
39ʼ 1”
36ʼ2”
81ʼ1”
42ʼ
38ʼ4”
85ʼ8”
46ʼ6”
30º
18ʼ1”
34ʼ5”
16ʼ4”
23ʼ1”
43ʼ1”
22ʼ9”
28ʼ3”
51ʼ8”
19ʼ11”
33ʼ 3”
60ʼ 4”
28ʼ 7”
35ʼ 9”
64ʼ 8”
32ʼ 11” 38ʼ 3”
69ʼ
37ʼ 3”
43ʼ1”
77ʼ8”
39ʼ11”
45ʼ7”
82ʼ
44ʼ3”
Le a din g in inn ov a t iv e c on v e y o r d e s ig n f or ov e r 2 5 y e a r s
Page 3
TCH Industrial Capacity 14” Tube Conveyors
TCH 14115A - The ideal piling conveyor.
With a high capacity operating angle of
20º the discharge height is 36’4” and the
distance from the axle to the discharge
point on the ground is 59’3”.
TCH14115A Swing Out
Shown with available hydraulic mover on
swing out.
• Industrial capacity TCH1400 Series
with 14” tube and 22” belt conveys up
to 10,000 bu./hr. in cereals or 12,000
bu./hr. in beans. Easily powered with an
80hp chore tractor.
Page 4
CONVEY-ALL®
TCH 1490 Electric Drive
More Capacity, Less Power Requirements, Longer Lasting
belt load with ease. As a result the belts can move millions of bushels
before being replaced.
When outside piling, or bunker storage, of beans, corn or any
other grain is necessary, Convey-Allʼs TCH 1400 series tube conveyors are up to the task! Convey-Allʼs easily portable, long reaching
conveyors, in lengths up to 120ʼ, make quick work of any job involving
outside piling or bunker storage.
These time-saving, long-reach conveyors mean fewer moves are
needed because of buried axles.
Manufactured in lengths from 35ʼ to 120ʼ.
Industrial capacity is what the TCH series of conveyors from
Convey-All are all about. The 22” wide belt in the 14” tube gently
hugs the product so there is less roll back and more capacity. Up to
10,000 bu./hr. in cereals or 12,000 bu./hr. in beans. Dump a semitrailer in 5 or 6 minutes. Capacity that rivals any auger and thereʼs
minimal or no product damage.
With conveyors thereʼs less friction in the tube so thereʼs less
product damage and your power requirements are lower so youʼll
save fuel and capital costs on power.
The positive, non-slip, self tensioning drive system handles the
C
TCH 1400 Series
Length & Spout Height
Specifications
B
Operating Angle
D
Operating
Angle
B
15º
TCH 1435
C
D
B
20ʼ9”
TCH 1485
C
84ʼ8”
D
37ʼ1”
B
22ʼ
TCH 1490
C
D
89ʼ6”
41ʼ11”
B
24ʼ7”
TCH 14100
C
D
99ʼ2”
51ʼ7”
B
25ʼ11”
TCH 14105
C
D
104ʼ
56ʼ4”
B
27ʼ1”
TCH 14115A
C
D
108ʼ11” 61ʼ3”
TCH 14120
B
C
D
29ʼ10”
119ʼ 56ʼ11”
20º
10ʼ10”
36ʼ2”
17ʼ2”
27ʼ11”
82ʼ5”
35ʼ9”
29ʼ8”
87ʼ1”
40ʼ6”
33ʼ
96ʼ6”
49ʼ11”
34ʼ9”
101ʼ3”
54ʼ7”
36ʼ4”
106ʼ3”
59ʼ3”
39ʼ11”
116ʼ1”
55ʼ1”
25º
13ʼ11”
35ʼ3”
16ʼ3”
34ʼ11”
79ʼ7”
34ʼ2”
37ʼ1”
84ʼ1”
38ʼ8”
41ʼ2”
93ʼ2”
47ʼ9”
43ʼ5”
97ʼ8”
52ʼ3”
45ʼ4”
102ʼ9”
56ʼ9”
49ʼ4”
112ʼ3”
52ʼ10”
30º
16ʼ9”
34ʼ1”
15ʼ4”
41ʼ8”
76ʼ3”
32ʼ1”
44ʼ2”
80ʼ7”
36ʼ5”
49ʼ1”
89ʼ2”
45ʼ1”
51ʼ8”
93ʼ6”
49ʼ5”
53ʼ11”
98ʼ8”
53ʼ9”
59ʼ2”
107ʼ9”
50ʼ2”
Le a din g in inn ov a t iv e c on v e y o r d e s ig n f or ov e r 2 5 y e a r s
Page 5
Conveyors With Low Profile Hoppers
Collapsed For Positioning
Raised For Containment
TCGN & TCSNH Series
• These 2 series are designed with low profile, extra long
reach hoppers to fit under bulk trailers, hopper bottom
bins and other load out areas. Ideal for loading trucks,
tenders, air seeder commodity carts and more.
• The TCGN series has a 10” tube with a 12” wide belt for
a capacity of up to 3500 bu./hr.
• The TCSNH series has a 10” tube with a 16” wide belt for
a capacity of up to 5000 bu./hr. in cereals or 6500 bu./hr.
in beans.
• Both series are available with gas, diesel, electric,
hydraulic or PTO drives. Gas drive shown. Note the low
mounting for stability and easy service access.
• The TCSNH 1045 is available as a totally self contained
conveyor. You get gas or diesel driven hydraulics with
hydraulic up and down control of both ends, hydraulic
belt drive and a hydraulically driven moving kit on the
conveyor (as shown on page 7).
Page 6
CONVEY-ALL®
The TCSNH 1045 is available as a totally self-contained unit
with hydraulic belt drive and a moving kit. Mounted low for stability,
comes with a large fuel tank and a large steel hydraulic oil reservoir.
Can be gas or diesel driven.
C
Controls are mounted so you can see both ends of the conveyor
for positioning. Hydraulically driven mover makes it easy for one
person to position the conveyor. Comes with hydraulic steering and
hydraulic up and down control of both ends. Being self-contained
there is nothing else to hook up. Just drive it into position and it is
ready to go to work.
TCSNH and TCGN Length &
Spout Height Dimensions.
(TCSNH illustrated)
B
OPERATING
ANGLE
D
Operating
Angle
TCSNH 1035
C
40ʼ2”
22º
25º
14ʼ5”
39ʼ4”
19ʼ6”
18ʼ8”
48ʼ5”
22ʼ11”
30º
17ʼ9”
38ʼ1”
19ʼ0”
22ʼ3”
46ʼ11”
22ʼ5”
D
18ʼ9”
B
15ʼ6”
TCGN 1045
C
45ʼ8”
D
24ʼ3”
Operating
Angle
TCGN 1035
C
36ʼ5”
D
19ʼ10”
B
14ʼ4”
TCSNH 1045
C
49ʼ10”
B
12ʼ0”
D
23ʼ5”
Lots of reach and easy to position.
22º
B
11ʼ9”
25º
13ʼ7”
35ʼ10”
18ʼ
17ʼ10”
44ʼ11”
23ʼ9”
30º
16ʼ8”
34ʼ8”
16ʼ8”
21ʼ8”
43ʼ4”
22ʼ9”
Leading in innovative conveyor design for over 25 years
Page 7
10” Utility Load Out Conveyors
T.E.D. (Top End Drive) and S-Wrap Drive 10” Utility Load Out Conveyors
T.E.D. (Top End Drive)
S-Wrap Drive
• Electric or hydraulic top end drive.
• Gas, electric, PTO or hydraulic drive. Gas drive shown.
Note the low mounting for stability and ease of
servicing motor. (Due to availability gas engine may not be exactly as
• 10” tube, 12” belt. Up to 3500 bu./hr. capacity.
• Adjustable discharge hood maximizes product flow at
various operating angles.
• 35’ and 40’ models.
• Collapsible hopper for easier positioning and superior
containment.
• Use outside or inside in temporary or permanent
installations.
• Low profile hopper available.
Page 8
shown).
• 10” tube, 12” belt. Up to 3500 bu./hr. capacity.
• Adjustable discharge hood maximizes product flow at
various operating angles.
• 35’ and 45’ models.
• Collapsible hopper for easier positioning and superior
containment.
• Use in temporary or permanent installations.
CONVEY-ALL®
C
TC T.E.D. and TC S Wrap Length
and Spout Height Dimensions.
(TC T.E.D. Illustrated)
B
Operating Angle
D
Options:
• Powered brush belt cleaner. Used to keep belt clean
when conveying wet or sticky products such as freshly
treated seed. Factory or field installed.
• Full length drip pans
These two options are recommended in seed treating applications. The powered brush belt cleaner helps keep the belt clean by
brushing off sticky or wet product. The brush is easily adjusted to
apply the right amount of pressure or it can be backed off when not
required.
The full length drip pans help contain the drips from freshly
treated seed.
Operating
Angle
20º
B
11ʼ2”
TC 1035 TED
C
34ʼ
D
12ʼ7”
B
12ʼ10”
TC 1040 TED
C
38ʼ8”
D
14ʼ9”
25º
14ʼ
33ʼ
12ʼ3”
16ʼ1”
37ʼ7”
14ʼ4”
30º
16ʼ9”
31ʼ11”
11ʼ11”
19ʼ3”
36ʼ3”
13ʼ11”
D
B
11ʼ4”
TC 1045
C
46ʼ11”
D
24ʼ4”
Operating
Angle
15º
B
TC 1035
C
20º
11ʼ11”
36ʼ6”
17ʼ9”
15ʼ4”
45ʼ11”
23ʼ11”
25º
14ʼ11”
35ʼ6”
16ʼ9”
19ʼ2”
44ʼ7”
23ʼ5”
Leading in innovative conveyor design for over 25 years
Page 9
Transfer Conveyors - 3 Models
• 10” dia. tube with a 12” wide belt.
UBGN-1014 Transfer Conveyor
• Clearance as low as 6 1/2” for easy
positioning under bulk trailers.
15ʼ4”
• Well balanced and easy to maneuver
and position.
4ʼ9”
36” - 48”
Adjustable
• Longer hopper gives you more reach,
is easier to position and provides
superior containment.
• Collapsible hopper.
6 1/2”
• Electric, hydraulic or gas drive.
Hopper collapses for easier positioining under low hoppers and raises for superior containment when
operating.
• Available with a tow package which
includes highway tires and a hitch.
UBSNH-1015 High Capacity
• A high capacity transfer conveyor with
a 10” dia. tube and a 16” wide belt.
• Well balanced and easy to maneuver
and position.
• Clearance from 6 1/2” to 7 3/4”.
17ʼ4”
• Longer collapsible hopper for easier
position, superior containment and
more reach.
5ʼ10”
38” - 48”
Adjustable
UBSNH-1418 High Capacity
• Comes with tow package which
includes highway tires and a hitch.
• Electric, hydraulic or gas drive.
• A high capacity transfer conveyor with
a 14” tube and a 22” wide belt.
• Well balanced and easy to maneuver
and position.
20ʼ2”
• Clearances from 6 1/2” to 7 3/4”.
5ʼ10”
38” - 48”
Adjustable
• Longer collapsible hopper for easier
position, superior containment and
more reach.
• Comes with tow package which
includes highway tires and a hitch.
• Electric, hydraulic or gas drive.
Page 10
CONVEY-ALL®
Drive Over Conveyor - High Capacity
32ʼ5”
DOSNH-1426 Drive Over
12ʼ
• High capacity drive over conveyor with
14” dia. tube and 22” wide belt.
• Extra large 12’ wide drive over deck for
easier positioning of trucks and trailers.
6ʼ9”
• 7” high deck for easy drive over.
32ʼ5”
69
25
17º
7 9/16”
40 1/2”
• Containment flaps lay flat for driving
on and off, and are raised for superior
containment for unloading.
• Large containment area for easy
unloading from bulk trailers and end
dump grain bodies.
• Comes with highway wheels and tow
hitch.
• Electric or hydraulic drive.
Low Profile Rail Car Unloaders
UBGN-1014-RC
6ʼ1/2”
36” - 48”
Adjustable
4 9/16”
16ʼ6”
Shown without wheels
UBSNH-1016-RC
7ʼ
4 5/8”
16.5º
36” - 48”
Adjustable
20ʼ
Extra low profile, less than 5” and exceptional reach make setting up to unload rail cars
fast. 3 models to match your capacity requirements. Gas, electric or hydraulic drive.
UBSNH-1418-RC
7ʼ
36” - 48”
Adjustable
4 5/8”
21ʼ6”
4 5/8”
• UBGN-1014-RC: 10” dia. tube with a
12” wide belt.
• UBSNH-1016-RC: 10” dia. tube with a
16” wide belt. High capacity.
• UBSNH-1418-RC: 14” dia. tube with a
22” wide belt. High capacity.
Leading in innovative conveyor design for over 25 years
Page 11
CST-C Year Round Productivity
What farmers have to say
about their CST-C Tenders
“We run two John Deere 1910
air carts. We’ve cut our fill time
from 35 minutes to 12 minutes and
basically eliminated one truck.”
Derek
Fahler, AB
“We seed with three air seeders. The Convey-All CST-C tender
services all three air seeders which
eliminated two trucks and drivers.
Fill time is less than 15 minutes.
Jake
Portage la Prairie, MB
CST-C Commercial Seed Tender
These multi-compartment tenders, with conveyor load out, can be used to transport various
fertilizers and seed(s). The conveyor helps ensure no seed damage or cross contamination.
Because there is only one set-up for your fertilizer(s) and seed(s) it greatly reduces the time it
takes to fill your seeding equipment. As a result youʼll seed more acres per day.
With up to 5 compartments youʼve got big capacity and the ability to service all your seeding equipment and floaters with different products all on the same trip. This will save trucks and
drivers.
Ideal for farmers as well as bulk seed and fertilizer dealers. Available with stainless steel
components.
Positioning Camera The available
camera, mounted on the unloading conveyor,
helps the truck operator know where his target
is. The camera is equipped with a microphone
and the in-cab monitor is equipped with a
speaker. This helps the truck operator hear
directions from a second person.
Self Contained Hydraulic Power Pack
Comes with its own self-contained hydraulic
power pack. Gas or diesel engine, large steel
hydraulic oil reservoir and large fuel tank.
On units mounted directly onto a truck
frame, the CST can use the truckʼs hydraulics if
so equipped.
“With the five compartments we
service our air seeder and floater
at the same time. Our fill time is a
third of what it was and now we do
it all with one truck.”
Paul
Miami, MB
“We run two 80’ Seed Hawk
drills with 600 bu. tanks. Using the
semi with an 8” auger our fill time
was 45 minutes. We now fill in less
than 15 minutes. On our farm that’s
an extra 100 acres per day seeded.
We also eliminated one truck.”
Elmer
Biggar, SK
Page 12
Swings To Left
Wireless Remote
Swings To Right
The unloading conveyor has over 25ʼ of hydraulically controlled, side to side swing. This allows you to fill all the compartments on your air seederʼs commodity cart with one set-up. It also
gives you more control when filling rail cars, etc.
With the available wireless remote you can control the entire process from the air seeders
commodity cart. No running up and down. Wireless remote functions include: raise, lower and
swing the conveyor into position - stop and start the conveyors - open and close gates. A bank of
“open” and “close” gate lights come with the wireless remote.
CONVEY-ALL®
CST-C Year Round Productivity
Yes, the CST-C was designed to increase the efficiency of filling seeding equipment. But, once purchased, farmers are finding they can use their CST-Cʼs year
round.
It can receive grain from the combine or grain cart the same as any other bulk
hauler. When filling the back of the CST the unloading conveyor swings to the side for
better access. The unloading conveyor can be removed if required.
Unloading is fast. 2 tons per minute, which means youʼll have the 40ʼ model unloaded in 20 minutes. And remember, there is only one set up. You donʼt waste time
moving the truck to empty the next hopper.
As for capacity - the 40ʼ model holds over 1,000 bushels so it will pay on your
longer hauls to market.
B
9ʼ3”
A
8ʼ2”
26º
22ʼ10”
26º
11ʼ5”
27º
4º
All The Way Down
30º
UNIT
DIMENSION A
DIMENSION B
CST-40-C
40ʼ
50ʼ 6”
CST-32-C
32ʼ
42ʼ6”
CST-26-C
26ʼ
36ʼ6”
CST-20-C
20ʼ
30ʼ6”
16ʼ6”
15ʼ3”
9ʼ5”
4ʼ 4ʼ11”
13ʼ5”
4ʼ
CST-C SPECIFICATIONS
Model
Length
in Feet
Total
Total*
Cubic Feet
Tons
(Bu.)
(Tonnes)
Number,
Size of
Compartments
Cubic
Feet Per
Compartment
Tons Per
Compartment
CST-20-C
20
673
(541)
CST-26-C
26
CST-32-C
CST-40-C
Conveyor Discharge
Length
Height
Body
Width
Overall Conveyor
Height
Swing
20.19
(18.32)
2 - 6ʼ
& 1 - 8”
6ʼ=204
8ʼ=265
6.12
7.95
30ʼ3”
5ʼ to 17ʼ
8ʼ
13ʼ 5”
22ʼ 10”
877
(705)
26.31
(23.87)
3 - 6ʼ
& 1 - 8ʼ
6ʼ=204
8ʼ=265
6.12
7.95
30ʼ3”
5ʼ to 17ʼ
8ʼ
13ʼ5”
22ʼ10”
32
1060
(852)
31.80
(28.85)
4 - 8ʼ
8ʼ=265
7.95
30ʼ3”
5ʼ to 17ʼ
8ʼ
13ʼ5”
22ʼ10”
40
1325
(1065)
39.75
(36.06)
5-8ʼ
8ʼ=265
7.95
30ʼ3”
5ʼ to 17ʼ
8ʼ
13ʼ5”
22ʼ10”
* Based on 60 lbs./cu.ft.
Leading in innovative conveyor design for over 25 years
Page 13
CST - 16’ (490 Bu.) to 32’ (975 Bu.) Models
CST Tenders
This series of Convey-All® CST tenders can be used to fill
floaters, fertilizer spreaders, lower air seeder commodity carts and
more.
When mounted on a standard 36” high truck frame or trailer
youʼll have 9ʼ10” of clearance under the discharge chute with a
25º operating angle. Clearance increases to 12ʼ at a 30º operating
angle.
Available with 2, 3 or 4 compartments so you can haul a wide
variety of different products on the same trip. And, with conveyor
load out there is less risk of cross contamination or product
damage.
Manufactured in 4 sizes from 608 cu. ft. with a capacity of 490
bu. or 18.24 tons to 1216 cu. ft. with a capacity of 975 bushels or
36.48 tons.
The 16, 18 and 20ʼ models are manufactured for a 34” rail
mount, which is your standard truck frame. The 32ʼ model is available with a 40” rail mount, which is your standard trailer frame, or
an 8ʼ deck for hauling on a step deck and selected other trailers.
20ʼ2”
6ʼ10”
25º
When mounted on a 36”
high truck or trailer frame
clearance increases to......9ʼ10”
at 25º.
Available with a self-contained hydraulic pack,
wireless remote, stainless steel conveyor and stainless
steel hopper bottoms.
Clearance is 12’ with a 30º conveyor incline,
mounted on a 36” high truck or trailer frame.
CST SPECIFICATIONS
Model
Length
in Feet
CST-16
16
608
(490)
CST-18
18
CST-20
CST-32
Page 14
Total
Total
Cubic Feet
Tons
(Bu.)
(Tonnes)
Number,
Size of
Compartments
Cubic
Feet Per
Compartment
Tons Per
Compartment
18.24
(16.55)
2-8ʼ
8ʼ=304
9.12
20ʼ
10ʼ to 12ʼ
8ʼ
9ʼ10”
25ʼ7”
684
(550)
20.52
(18.62)
3-6ʼ
6=228
6.84
20ʼ
10ʼ to 12ʼ
8ʼ
9ʼ10”
25ʼ7”
20
760
(610)
22.80
(20.68
2-6ʼ
&1-8ʼ
6ʼ=228
8ʼ=304
6.84
9.12
20ʼ
10ʼ to 12ʼ
8ʼ
9ʼ10”
25ʼ7”
32
1216
(975)
36.48
(33.09)
4-8ʼ
8ʼ=304
9.12
20ʼ
10ʼ to 12ʼ
8ʼ
9ʼ10”
25ʼ7”
CONVEY-ALL®
Conveyor Discharge Body Overall Conveyor
Length
Height
Width Height
Swing
BTS-290 Seed Tender
12ʼ1”
10ʼ6”
10ʼ2”
7ʼ 7”
14ʼ 4”
24ʼ6”
Capable of filling a 16 row 30”
spacing planter or a 24 row 22”
spacing planter with one set up.
18ʼ10”
With a hopper height of 10’ the BTS290 easily fits under most bulk seed
loading stations. Easily reached with most front end loaders and forklifts. Ideal
for farmers who use tote bags or seed boxes.
You can fill most planters with only one set-up. Conveyor can be transported to the front or rear.
CONVEY-ALL BTS290 Seed Tender
• Fast and effortless - no more handling bags.
• Conveyor load-out, use with any seed.
• 290 units (240 bu.) - the ideal size for most large planters.
f youʼve been told a brush auger or air delivery system doesnʼt
Iwonʼt
damage delicate seeds, ask your seed cleaning plant why they
use them on the clean side of their plant!
All Convey-All BTS Seed Tenders feature conveyor load-out. The
conveyor ensures gentle handling so thereʼs no seed damage - even
with delicate, extra dry seed. The conveyor is faster than a brush type
auger and it can also be used for granular herbicides and fertilizer.
The new BTS 290 is built for productivity. You donʼt have to back
up to fill most planters. Simply pull along side the rear of the planter,
swing the conveyor into position and you are ready to fill.
The swinging conveyor feature is standard. It is designed to save
you time by giving you more reach. Even with the larger planters you
shouldnʼt have to move the tender. The conveyor effortlessly swings
from transport to working position. Set-up is fast and easy.
With 152º of swing you get more reach for fewer moves. Use with virtually
any planter including center fill models.
ew
N
Available with:
• New Wireless remote control gives
you remote starting, throttle control,
power swing and gate(s) control.
• Dedicated bumper hitch and gooseneck trailers (as shown). Deck height
of dedicated 290 trailers are
23”.
• Hydraulic drive rather than electric
start gas engine.
• Sample access ports.
• A divided hopper - equal split (as
shown on left). Limited availability of
3 compartment hoppers. Please
order early.
• Onboard scale.
Specifications: BTS290 Seed Tender
Conveyor
Discharge Rate
Hopper Capacity
Conveyor Swing
Mounting
Length
Hopper Length
Hopper Width*
Hopper Height*
Conveyor Height*
Discharge Height*
Weight*
8” dia. x 21ʼ tube with 10” wide belt
1,500 lbs./min.
290 units (240 bu.) single or equal split hopper
Conveyor transports to front or rear and has a
152º swing
Deck mount frame. Also available with 23” high
dedicated gooseneck or bumper hitch trailer
24ʼ6” (tank plus conveyor in transport position)
11ʼ 6”
8ʼ
8ʼ 3”
10ʼ 4”
8ʼ 8 3/4”
2560 lbs. with gas drive & split hopper
*For total discharge height, transport dimensions and weight add the dimensions
and weight of the trailer or truck deck.
Leading in innovative conveyor design for over 25 years
Page 15
BTS-405 Seed Tender
Fill most planters with only 1 set-up.
Shown with available “long” downspout.
23ʼ 6”
12ʼ11”
14ʼ
9ʼ2”
11ʼ3”
26º
4ʼ
Available with an 18’ or 21’ conveyor. 18’ illustrated.
BTS-405
8ʼ
Capable of filling a 16 row 30”
spacing planter or a 24 row 22”
spacing planter with one set up.
Specifications: BTS405 Seed Tender
Conveyor
Discharge Rate
Hopper Capacity
Conveyor Swing
Mounting
Length
Hopper Length
Hopper Width*
Hopper Height*
Conveyor Height*
Discharge Height*
Weight* (empty)
8” dia. x 18ʼ tube with 10” wide belt
Up to 1,500 lbs./min.
405 units (338 bu.) equal split hopper is standard
Conveyor transports to front and swings 152º to
fill most planters with only one set-up. Can also
be used to fill center-fill planters
Deck mount frame. Ready to mount on most
truck or trailer decks.
23ʼ6” (hopper plus conveyor in transport position)
14ʼ
8ʼ
9ʼ 1”
9ʼ 1”
7ʼ 6”
2660 lbs.
*For total discharge height, transport dimensions and weight add the dimensions
and weight of the trailer or truck deck. Ask about the stainless steel options.
Page 16
W emo
R
7ʼ 9”
11ʼ 5”
BTS-405
ew s
N ireles te
Available wireless remote gives you remote starting, throttle
control, power conveyor swing and control of the gates.
CONVEY-ALL BTS405 Seed Tender
• Conveyor load-out, use with any seed or granular
fertilizer.
• Very productive - no more handling bags.
• Equal split hopper allows you to handle both seed and
fertilizer with one unit. 3 compartment hoppers available.
• Onboard scale available.
ith the BTS405 Seed Tender an equal split hopper is stanW
dard. This gives you more options. You can haul a total of 405
units (338 bu.) of seed or 200 units (168 bu.) of seed and 6 tons of
+
fertilizer.
With the conveyor load-out you donʼt have to worry about cross
contamination. Load out your seed, close the gate and run the conveyor till it is clean then load your fertilizer.
CONVEY-ALL®
WT-290 Weigh Wagon / Retail Seed Delivery
Up to 4,000 lbs./min. discharge
25ʼ 7”
12ʼ 5”
12ʼ10”
12ʼ
8ʼ8”
26.6º
WT290
10ʼ11”
17ʼ 6”
10” dia. tube with 16” wide belt gives you fast unloading. 12’ high
discharge easily reaches virtually any truck or bulk trailer.
• 10” tube with 16” belt for fast, gentle unloading.
• 12’ discharge height.
• Use as a weight wagon or retail seed delivery.
he WT290 is designed to be used as a weigh wagon. The 10”
T
dia. conveyor tube with 16” wide belt gives you fast unloading
at harvest time up to 4,000 lbs./min. The 12ʼ discharge height easily
reaches most trucks and bulk trailers.
Conveyor load out allows you to use the WT290 for any crop,
including those with delicate seeds, as well as granular herbicides
and fertilizer.
In addition to using the WT290 as a harvest time weigh wagon, it
is also ideal when seeding test plots. Now you can weigh the same
amount of seed or fertilizer for each test plot.
SPECIFICATIONS:
With the exception of the discharge tube which is designed with
harvest speed capacity and a higher discharge, Convey-Allʼs WT290
Seed Tender/Weigh Wagon is based on the BTS290 Seed Tender.
Specifications for the BTS290 Seed Tender are listed on page 15.
All models are available with
hydraulic or gas drives. Gas drives
come with electric start and
throttle control.
Sample collection ports are
standard.
Large easy to read and easy to
use scale head.
Oversized load cells for durability.
Leading in innovative conveyor design for over 25 years
Page 17
PST 375 Portable Seed Tank
N
ew
Portable Seed Tank
• Designed to be set up in farmer’s
yard or other convenient location.
• Bulk seed dealer delivers seed into
the Portable Seed Tank and the
farmer takes it out.
• 375 units capacity
With a 6’6” x 10’ base it is easily transported
on a flat bed truck or most trailers. Legs fold up
for transporting.
With an empty weight of 1820 lb. the portable
seed tank can be off loaded with most fork lifts or
many front end loaders with pallet forks.
• Only 10’4” tall - easily filled with seed
tender yet it has a big 28” of
clearance for your conveyor.
• Comes with all the features including
ground controlled lid, ladder and site
glasses.
Surge Bins
Convey-All® Surge Bins
• Designed to be permanently or temporarily set up most
anywhere.
• 150 bu. capacity or 250 bu. with available side wall
extensions.
• Adjustable legs allow clearance for seed treater.
• Full open top for easy filling. A roll tarp is available.
• Other standard features include rack and pinion slide
gate, site glasses and exterior ladder.
• Available with NTPE approved legal for trade scale.
Page 18
CONVEY-ALL®
Mini Scale Tower
Convey-All® Continuous
Flow Mini Scale Tower
• NTEP approved legal for trade in both indoor
and outdoor installations.
• Reduces weigh and treating time by over
40%.
• 2000 bu./hr. capacity.
• Can be used with any dry, flowable product.
• Rebagging option available.
Although Convey-Allʼs Mini Scale Tower can be used
with any dry, flowable product and has a wide range of
continuous flow scale applications it is ideal for use in
seed treating lines.
The Mini Scale Tower is computer controlled. Simply
enter the number of lbs. of seed required. The Mini
Scale tower delivers a continuous flow of weighed seed
to the seed treater. The computer turns the system off
when the required weight of seed has been treated.
Compared to traditional batch systems the Mini
Scale Tower reduces weighing and treating time by over
40%.
Leading in innovative conveyor design for over 25 years
Page 19
Bulk Seed Systems & More
Page 20
CONVEY-ALL®
Bulk Seed Systems & More
Convey-All® Bulk Seed Systems & More
• In plant and storage yard systems.
Individual components or complete systems
• Capacities to match your exact requirements.
With over 25 years of experience in innovative conveyor design,
Convey-All is the logical choice for your bulk seed systems.
• Complete custom design, fabrication, installation and
after sales service available.
• Systems can be manual, completely automated or
anything in between.
• Seed treating and other systems can be incorporated.
• Conveyors reduce the risk of seed damage.
• Conveyors reduce the risk of cross contamination.
Whether you require an individual component or a complete
system for your outside storage yard or inside your plant, talk to
the people at Convey-All. They have the experience and expertise
required to get the job done. Full design services are available.
In the seed business conveyors are the way to go. They are
gentle on even the most delicate seeds and they greatly reduce the
risk of cross contamination.
For your next project talk to the experts at Convey-All.
• Ideal for bulk seek plants and more.
• Components and systems also available in stainless
steel.
Leading in innovative conveyor design for over 25 years
Page 21
Bulk Seed Systems & More
Part of a rail car loading facility.
Conveying product from hoppered or flat bottom storage. Conveying product to the plant. Conveying product within the plant and
conveying product for bagging, loading or back to storage. Convey-All
can custom design and manufacture to meet your exact requirements.
Page 22
CONVEY-ALL®
Bulk Seed Systems & More
Surge Bin
TC-1035 TED Conveyor
Treater
Open Bed Roller
TC-10”x20ʼ
TC-1060-ELEC
Treater
Mini
Scale
Tower
TCH-1035-T.E.D.
Treater
OBR-1680
Mini Scale Tower
Super Structure
OBR Conveyor
TCH-1035 TED
TC-1013
OBR-1892
Put the Convey-All® design team to work for you.
Leading in innovative conveyor design for over 25 years
Page 23
CONVEY-ALL
®
Stainless Steel
• For more corrosive environments Convey-all conveyors and tenders are
available in all stainless steel or with stainless steel components.
• Please phone with your requirements.
in Canada
in U.S.A.
CONVEY-ALL®
Box 2008, 130 Canada St., Winkler, MB
R6W 4B7
1-800-418-9461
(204) 325-4195
FAX: (204) 325-8116
www.convey-all.com
Your Notes:
Printed in Canada
CONVEY-ALL USA®
P.O. Box 175, Hamilton, North Dakota 58238
1-800-454-3875
(701) 454-3875
FAX: (701) 454-3456
www.conveyall.net
Available from:
Some Photos may show optional equipment. Due to itsʼ commitment to continual improvement,
Convey-All® reserves the right to make changes without notice or obligation.
Copyright 2009