list price schedule

Transcription

list price schedule

EFFECTIVE may 2015
LIST PRICE
SCHEDULE
# G215
for Gould Solenoid Valves & Parts
Made in the USA
J. D. Gould Company, Inc. • P. O. Box 18128 • Indianapolis, IN 46218-0128
(800) 634-6853 • FAX (317) 547-5234
www.gouldvalve.com • email: [email protected]
We Proudly Accept
OR
An ISO 9001:2008
Registered Company
PRINTED IN
USA
REQUIRED ORDER SPECIFICATIONS
Each order must CLEARLY state the following information:
1.
FLUID – Be SPECIFIC Valves will not be labeled in general terms like Liquid – if not specified, valves will be
stamped for Air & Water Service.
2.
OPERATING PRESSURE DIFFERENTIAL – Specify both the MINIMUM and MAXIMUM pressure - full range.
NOTE: Piston-Pilot Operated Solenoid Valves must maintain a 5 psi (or as specified) MINIMUM Operating Pressure
Differential [∆P].
3.
VOLTAGE – Specify AC or DC and include both ambient and fluid temperatures, if possible.
4.
PIPE SIZE – In many applications, a properly “sized” valve may not correspond to the size of the pipe immediately
before and after the valve. Avoid “starving” the valve, consult factory for assistance: (800) 634-6853.
5.
COIL ENCLOSURE – Specify NEMA 1 (Standard), or NEMA 4X (Fungusproof:standard on M Series valves) or
NEMA 4 (Watertight), NEMA 5 (Dusttight), NEMA 7 (Explosionproof).
INDEX
PAGES
VALVE SERIES
DESCRIPTION
BRONZE CONSTRUCTION • 2-WAY • FULL PORT • POSITIVE SHUTOFF
PISTON-PILOT SOLENOID VALVES • ALL AC & DC VOLTAGES AVAILABLE
4-5
6-7
8-9
10-11
SERIES M
General Service • Normally Closed Solenoid Valves • Pressures to 250 psi • NEMA 4X Coil Enclosure
Coils include 120-240/60 (Dual Voltage).
See Bulletin 120-M
SERIES Q
General Service • Normally Closed Solenoid Valves • Pressures to 400 psi • NEMA 1 (Standard), NEMA 4
(Watertight), NEMA 5 (Dusttight) or NEMA 7 (Explosionproof) Coil Enclosures.
See Bulletin 200-Q
SERIES Q-1
Steam & Hot Fluid Service • Normally Closed or Normally Open Solenoid Valves • Pressures to 200 psi
See Bulletin 200-Q
NEMA 1, 4, 5, or 7 Coil Enclosures.
TYPES B • D
Hydraulic & High Pressure Service • Normally Closed Solenoid Valves • Pressures to 1200 psi
NEMA 1, 4, 5, or 7 Coil Enclosures • Closing Speed Adjustments & Manual Opening
See Bulletins 600-B or 620-D
Sizes 1/8” thru 2”
12-13
QR • BR • DR
General & Hydraulic Service • Normally Open Solenoid Valves • Pressures to 300 psi
NEMA 1, 4, 5 or 7 Coil Enclosures • Closing Speed Adjustments & Manual Opening (Types BR & DR ONLY)
See Bulletins 200-Q, 600-B or 620-D
14-15
Q-230 • K-230
Safety Solenoid Valves • Normally Closed or Normally Open • Pressures to 150 psi • Positive Shutoff
NEMA 7 (Explosionproof) Coil Enclosure for Hazardous Locations • Service: Gasoline, Diesel Fuel and #1 & #2 Fuel Oils
Type Q-230
Type K-230: 303 Stainless Version • See Bulletins 230-Q & 230-K
BRONZE/BRASS REPAIR KITS & PARTS • COILS • OPTIONAL FEATURES
NOTE: Valve Types with -2 = Explosionproof; -24 = Watertight & Explosionproof; and -25 = Dusttight & Explosionproof enclosure.
* We can cross-reference ours/competitors obsolete valve models.
16-17
AVAILABLE COILS & OPTIONAL FEATURES FOR GOULD SOLENOID VALVES
18-19
SALES, SHIPPING & RETURN POLICIES
1. Valves can be BOXED INDIVIDUALLY for Stocking Distributors at NO EXTRA CHARGE upon request.
2.An EXPEDITING FEE of 5% of the merchandise ordered ($25 Minimum) will apply to all orders that require
shipment on the same day that the order is received.
3.A MINIMUM 15% Restocking Charge will be applied to all returned merchandise.
4.A 1-3/4% Finance Charge per month will apply to all past due invoices (21% APR).
5. VISA®, MASTERCARD®, DISCOVER®, AMERICAN EXPRESS® or PayPal® are gladly accepted.
GENERAL PURPOSE
GENERAL PURPOSE
CLASS I GROUP D
CLASS II GROUP E, F & G
HAZARDOUS LOCATIONS
Type M followed by up to 5 alpha-numeric digits, for AIR & WATER, 250 psi MAX. 220°F FLUID, 120 50/60,
240 50/60, 480 50/60 & 120-240 50/60 Hz DUAL VOLTAGE ONLY. Type M-1 followed by up to 3 alphanumeric digits, for STEAM, 125 psi MAX. 356°F FLUID, 120 50/60, 240 50/60, 480 50/60 & 120-240 50/60 Hz
DUAL VOLTGAGE ONLY. Type Q-3V and Q-3T for AIR & WATER, 400 psi MAX 220°F FLUID, 77°F AMBIENT,
120/60,240/60, 480/60 Hz Only. Type Q-1-3T for STEAM 150 psi MAX. 365°F MAX. FLUID, 77°F AMBIENT,
120/60,240/60, 480/60 Hz Only. Type BH-19 for STEAM 100 psi MAX. 338°F FLUID 120/60,240/60, 480/60 Hz Only.
Type Q-3V-2, Q-3V-24, Q-3V-25, Q-3T-2, Q-3T-24, Q-3T-25, for AIR & WATER, 400 psi MAX. 220°F MAX. FLUID,
120/60, 240/60, 480/60 Hz ONLY. CONSULT FACTORY FOR DETAILS.
CLASS I GROUP D
HAZARDOUS LOCATIONS
GENERAL PURPOSE
Type Q-230 for GASOLINE - #1 & #2 FUEL OILS - DIESEL FUEL, 100 psi MAX. 77°F FLUID. 120/60, 240/60, 480/60
Hz ONLY. CONSULT FACTORY FOR DETAILS.
Type M-3, M-3V, for AIR-WATER-GENERAL SERVICE 250 psi MAX. 220°F MAX. FLUID 120/60, 240/60, 480/60 &
120-240/60 Hz DUAL VOLTAGE ONLY. Type Q-3V, Q-3 and Q for AIR-WATERGENERAL SERVICE 400 psi MAX. 200°F MAX. FLUID 120/60, 240/60, 480/60 Hz Only.
Type Q-1 for STEAM 150 psi MAX. 365°F MAX. FLUID 120/60, 240/60 Hz.
Coil Selections &
Optional Features
Lists Special Options available for Specific Applications
Cross Reference Coils
303 & 316 STAINLESS STEEL REPAIR KITS & PARTS
20-21
303 & 316 Stainless
Steel Parts
Includes Repair Kits & Individual Parts for Stainless Steel Valves.
Types K • KX • KD • G • GX Solenoid Valves (Plus Normally Open versions)
STAINLESS STEEL CONSTRUCTION • 2-WAY • FULL PORT • PACKLESS • POSITIVE SHUTOFF • NEMA 1, 4, 5, or 7 COIL ENCLOSURES
ALL AC & DC VOLTAGES AVAILABLE • PISTON-PILOT SOLENOID VALVES
22-23
24-25
26-27
K & KR
303/304 Stainless Steel Valves for Non-Hazardous Corrosive Fluids• Pressures to 1000 psi
Normally Closed or Open • Standard Teflon™ Discs. See Bulletin 800-K
KX & KRX
316 Stainless Steel Valves for Non-Hazardous Corrosive Fluids & Applications for Purity
Normally Closed or Open • Pressures to 300 psi • All Wetted Parts are 316 SS or Teflon™
Type KX-3EP-EP-62 for De-ionized Water Applications (All Welds Passivated) See Bulletin 800-K
K-1 • KR-1 • KX-1 • KRX-1
Steam & Hot Fluid Service • 303 or 316 Stainless Steel Construction
Normally Closed or Normally Open • Pressures to 200 psi. See Bulletin 800-K
DIRECT ACTING • 2-WAY SOLENOID VALVES• PACKLESS • POSITIVE SHUTOFF • SOLENOID VALVES • BRONZE and STAINLESS STEEL CONSTRUCTION
FULL & FRACTIONAL PORTS • NEMA 1, 4, 5, or 7 COIL ENCLOSURES • ALL AC & DC VOLTAGES AVAILABLE
B3-21 • BH-19
AD • QD • KD
Normally Closed • Zero Pressure Differential • Bronze and Stainless Steel Construction
Positive Shutoff • NEMA 1, 4, 4X, 5 or 7 Coil Enclosures • All AC & DC voltages.
See Bulletins 3000-B3, 1000 AD or 1000-QKD
F • FR • G • GR
General Service • Brass and Stainless Steel Construction
Zero Pressure Differential • Pressures to 1000 psi • Port Sizes from 1/16” to 1/4”
NEMA 1, 4, 5 or 7 Coil Enclosures • All AC & DC voltages. See Bulletin 4000-FG
32-33
F-1 • FR-1 • G-1 • GR-1
Steam & Hot Fluid Service • Brass & Stainless Steel Construction
Zero Pressure Differential • Pressures to 800 psi • Port Sizes from 1/16”to 1/4”
NEMA 1, 4, 5 or 7 Coil Enclosures • All AC & DC voltages. See Bulletin 4000-FG
34-35
GX • GRX • GX-1 • GRX-1
316 Stainless Steel Right Angle Solenoid Valves • Normally Closed or Open • Zero Pressure Differential
Port Sizes from 1/16”to 1/4”• Pressures to 300 psi • For Non-Hazardous Corrosive Fluids • Purity and Steam
Applications • NEMA 1, 4, 5 or 7 Coil Enclosures • All AC & DC Voltages Available. See Bulletin 5000-GX
28-29
30-31
SAFETY VALVE
Includes Repair Kits for: M • Q • B • D • F • QD • AD • B3 Series Valves
Repair Kits Replace ALL INTERNAL PARTS
Bronze/Brass Parts
Sizes 1/8” • 1/4” • 3/8”
Sizes 1/8” • 1/4” • 3/8”
Sizes 1/8” • 1/4” • 3/8”
ALL PRODUCTS
36-37
Terms and Conditions of Sale & Warranty
38
Installation • Inspection • Maintenance Check List for Solenoid Valves
™Teflon is a DuPont Company trademark. ®Viton is a registered trademark of DuPont Dow Elastomers.
MEDIA • MAXIMUM PRESSURES •
∆Ρ
MODEL
(Valve Type)
M-3V
M-3B
M-3EP
Minimum
Pressure
Differential
5 psi
∆P
AIR &
Inert Gases
125
psi
WATER &
Aqueous
Liquids
125
psi
LIGHT OILS
(Maximum Viscosity
225 SSU 15W SAE)
125
psi
NEMA 4X coil enclosures
LISTINGS
STEAM
Not For
Use on
STEAM
See type
M-1-3T or
Q-1-3T
COIL SPECIFICATIONS
AVAILABLE
VOLTAGES
120/60
240/60
480/60
FLUID
TEMPERATURE
(@ 77°F ambient
temperature)
Insulation
220˚F
Class H
Insulation
VALVE SPECIFICATIONS
Cv
FACTOR
M-3V
M-3B
Standard Features:
Bronze Packless Solenoid Valves • Normally
Closed • Positive Shutoff • 2-Way • Piston Pilot
Operated • 1/8” through 2” NPT • Full Port
• NEMA 4X Coil Enclosure • All AC & DC voltages available • Plus 120-240/60 (Dual Voltage)
Type M-3V Series Features:
For General Service: Air, Water & Light Oils
not to exceed 225 SSU • Pressures to 250 psi
(5 psi min ∆P) • Fluid Temps. to 220°F • Viton®
Leakproof Seat Screw
&
LISTINGS
Type M-1-3T Series Features:
For Steam & Hot Fluids • Pressures to 125
psi (5 psi min ∆P) • Fluid Temps. to 356°F •
Teflon™ Seals
&
LISTINGS
Refer to Bulletin 120-M
M-3EP
M4-3V
M4-3B
M4-3EP
or
125 psi
125 psi
10 psi
∆P
or
or
250 psi
250 psi
5 psi
or
10 psi
∆P
M-1-3T
for 5-50 psi use
PRICE SCHEDULE G215
5 psi
M-1-3EP
5 psi
∆P
WEBSITE:
E-MAIL:
[email protected]
PAGE 4
for 5-50 psi use
M4-1-3EP
250 psi
125 psi
125 psi
125 psi
or
or
or
250 psi
250 psi
250 psi
See type
M-1-3T or
Q-1-3T
Not For
Use on
STEAM
See type
M4-1-3T or
Q4-1-3T
220˚F
Class H
Insulation
480/60
12/60
24/60
12V DC
24V DC
48V DC
115V DC
230V DC
250˚F
Class H
Insulation
STEAM OR STEAM OR STEAM OR
HOT
HOT
HOT
AIR
OILS
WATER
125
125
125
psi
psi
psi
125
psi
240/60
120/240/60
480/60
356˚F
Class H
Insulation
12/60
24/60
M4-1-3T
www.gouldvalve.com
or
120/60
240/60
120/240/60
Dual Voltage
120/60
EFFECTIVE may 2015
4707 Massachusetts Avenue
Indianapolis, IN 46218-3144
125 psi
Not For
Use on
STEAM
5 psi
∆P
STEAM OR STEAM OR STEAM OR
HOT
HOT
HOT
AIR
WATER
OILS
125
125
125
psi
psi
psi
125
psi
12V DC
24V DC
48V DC
115V DC
230V DC
356˚F
Class H
Insulation
PIPE SIZE
{FNPT}
LIST
PRICE
5
SHIPPING
WEIGHT
1.3
5/8”
1/8”
$ 128.00
3 lbs.
2.1
5/8”
1/4”
128.00
3 lbs.
2.3
5/8”
3/8”
128.00
3 lbs.
3.9
5/8”
1/2”
128.00
3 lbs.
5.1
7/8”
3/4”
156.00
4 lbs.
11.6
1”
1”
245.00
5 lbs.
12.1
11/4”
11/4”
322.00
7 lbs.
26.0
1 /2”
1 /2”
448.00
9 lbs.
1
1
2”
2”
664.00
14 lbs.
1.3
5/8”
1/8”
$138.00
3 lbs.
2.1
5/8”
1/4”
138.00
3 lbs.
2.3
5/8”
3/8”
138.00
3 lbs.
3.9
5/8”
1/2”
138.00
3 lbs.
5.1
7/8”
3/4”
166.00
4 lbs.
48.0
1” M-3V
ORIFICE
PAGE
11.6
1”
1”
255.00
5 lbs.
12.1
11/4”
11/4”
332.00
7 lbs.
26.0
1
1 /2”
1 /2”
458.00
9 lbs.
48.0
1.3
2”
5/8”
2”
1/8”
674.00
$158.00
14 lbs.
3 lbs.
2.1
5/8”
1/4”
158.00
3 lbs.
2.3
5/8”
3/8”
158.00
3 lbs.
3.9
5/8”
1/2”
158.00
3 lbs.
5.1
7/8”
3/4”
186.00
4 lbs.
11.6
1”
1”
275.00
5 lbs.
12.1
1
1 /4”
1
1 /4”
352.00
7 lbs.
26.0
1 /2”
1 /2”
478.00
9 lbs.
1
1
1
48.0
2”
2”
694.00
14 lbs.
1.3
5/8”
1/8”
$157.00
3 lbs.
2.1
5/8”
1/4”
157.00
3 lbs.
2.3
5/8”
3/8”
157.00
3 lbs.
3.9
5/8”
1/2”
157.00
3 lbs.
5.1
7/8”
3/4”
191.00
4 lbs.
11.6
1”
1”
279.00
5 lbs.
12.1
1
1 /4”
11/4”
372.00
7 lbs.
26.0
1 /2”
1
1 /2”
501.00
9 lbs.
48.0
2”
2”
728.00
14 lbs.
1.3
5/8”
1/8”
$177.00
3 lbs.
3 lbs.
1
2.1
5/8”
1/4”
177.00
2.3
5/8”
3/8”
177.00
3 lbs.
3.9
5/8”
1/2”
177.00
3 lbs.
5.1
7/8”
3/4”
211.00
4 lbs.
11.6
1”
1”
299.00
5 lbs.
12.1
1
1 /4”
1
1 /4”
392.00
7 lbs.
26.0
11/2”
11/2”
521.00
9 lbs.
48.0
2”
2”
748.00
14 lbs.
∆P
MODEL
(Valve Type)
Standard
NEMA 1
Minimum
Pressure
Differential
COIL AND VALVE SPECIFICATIONS
MEDIA • MAXIMUM PRESSURES • LISTINGS
AIR &
Inert Gases
WATER &
Aqueous
Liquids
OIL
(Max. Viscosity
400 SSU
or 30 SAE
STEAM
AVAILABLE
VOLTAGES
Explosionproof
NEMA 7
FLUID
TEMPERATURE
(@ 77°F ambient
temperature)
Insulation
NORMALLY CLOSED
Q-3T
Q-3T-2
5 psi
Q-3B Q-3B-2
∆P
150
psi
150
psi
Q-3EP Q-3EP-2
150
psi
200 ssu
or SAE 10
1” Q-3T
11/2” Q-3V-2
• Bronze Packless Solenoid Valves
• For General Service: Air, Water &
Oil not to exceed 400 SSU
• Normally Closed
• Positive Shutoff
• 2-Way • Piston Pilot Operated
• Pressures to 400 psi
•All AC & DC voltages available
• NEMA 1, 4, 5 or 7 Coil Enclosure
• Fluid Temperatures to 300°F
• Viton® Leakproof Seat Screw
(Q-3V)
• Teflon™ Leakproof Seat Screw
(Q-3T)
•
&
LISTINGS
5 psi
Q-3V Q-3V-2
∆P
Q-3T
Q-3T-2 10 psi
∆P
150
psi
400
psi
150
psi
400
psi
150
psi
200 ssu
or SAE 10
400
psi
200 ssu
or SAE 10
Not For
Use on
STEAM
See
type Q4-1-3T
PRICE SCHEDULE G215
EFFECTIVE may 2015
Q4-3V Q4-3V-2 10 psi
∆P
250
psi
250
psi
WEBSITE:
www.gouldvalve.com
E-MAIL:
[email protected]
Q4-3T Q4-3T-2 10 psi
∆P
400
psi
400
psi
PAGE 6
XS Coil
400 ssu
or SAE 30
400
psi
XS Coil
400 ssu
or SAE 30
240/60
480/60
220˚F
Class F
Insulation
(Pressures to
200 psi)
Not For
Use on
STEAM
See
type Q4-1-3T
120/60
240/60
480/60
220˚F
Class F
Insulation
(Pressures to
200 psi)
Not For
Use on
STEAM
See
type Q4-1-3T
120/60
240/60
480/60
220˚F
Class F
Insulation
(Pressures to
200 psi)
Refer to Bulletin 200-Q
250
psi
120/60
Not For
Use on
STEAM
See
type Q4-1-3T
(Pressures to
200 psi)
Not For
Use on
STEAM
See
type Q4-1-3T
(Pressures to
200 psi)
12/60
24/60
120/60
240/60
480/60
12V DC
24V DC
48V DC
115V DC
230V DC
12/60
24/60
120/60
240/60
480/60
12V DC
24V DC
48V DC
115V DC
230V DC
300˚F
Class F
Insulation
300˚F
Class F
Insulation
Cv
FACTOR
1.3
2.1
2.3
3.9
5.1
11.6
12.1
26.0
48.0
75.0
100.0
1.3
2.1
2.3
3.9
5.1
11.6
12.1
26.0
48.0
75.0
100.0
1.3
2.1
2.3
3.9
5.1
11.6
12.1
26.0
48.0
75.0
100.0
1.3
2.1
2.3
3.9
5.1
11.6
12.1
26.0
48.0
75.0
100.0
1.3
2.1
2.3
3.9
5.1
11.6
12.1
26.0
48.0
75.0
100.0
ORIFICE
5/8”
5/8”
5/8”
5/8”
7/8”
1”
11/4”
11/2”
2”
21/2”
3’
5/8”
5/8”
5/8”
5/8”
7/8”
1”
11/4”
11/2”
2”
21/2”
3”
5/8”
5/8”
5/8”
5/8”
7/8”
1”
11/4”
11/2”
2”
21/2”
3”
5/8”
5/8”
5/8”
5/8”
7/8”
1”
11/4”
11/2”
2”
21/2”
3”
5/8”
5/8”
5/8”
5/8”
7/8”
1”
11/4”
11/2”
2”
21/2”
3”
PIPE SIZE
{FNPT}
1/8”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
21/2”
3”
1/8”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
21/2”
3”
1/8”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
21/2”
3”
1/8”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
21/2”
3”
1/8”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
21/2”
3”
TYPE
Q-3T
Q-3V
Q-3T
Q4-3V
Q4-3T
LIST
PRICE
Standard
Coil
$159.00
159.00
159.00
159.00
186.00
276.00
357.00
482.00
700.00
1,157.00
1,847.00
$164.00
164.00
164.00
164.00
191.00
281.00
362.00
487.00
707.00
1,164.00
1,852.00
$161.00
161.00
161.00
161.00
189.00
278.00
359.00
484.00
704.00
1,160.00
1,850.00
$167.00
167.00
167.00
167.00
193.00
284.00
365.00
489.00
709.00
1,168.00
1,854.00
$177.00
177.00
177.00
177.00
206.00
295.00
375.00
500.00
718.00
1,176.00
1,866.00
PAGE
S
H
I
P
P
I
N
G
W
E
I
G
H
T
4 lbs.
4 lbs.
4 lbs.
4 lbs.
5 lbs.
6 lbs.
8 lbs.
10 lbs.
15 lbs.
22 lbs.
35 lbs.
4 lbs.
4 lbs.
4 lbs.
4 lbs.
5 lbs.
6 lbs.
8 lbs.
10 lbs.
15 lbs.
22 lbs.
35 lbs.
4 lbs.
4 lbs.
4 lbs.
4 lbs.
5 lbs.
6 lbs.
8 lbs.
10 lbs.
15 lbs.
22 lbs.
35 lbs.
4 lbs.
4 lbs.
4 lbs.
4 lbs.
5 lbs.
6 lbs.
8 lbs.
10 lbs.
15 lbs.
22 lbs.
35 lbs.
4 lbs.
4 lbs.
4 lbs.
4 lbs.
5 lbs.
6 lbs.
8 lbs.
10 lbs.
15 lbs.
22 lbs.
35 lbs.
7
LIST
PRICE
TYPE
-2 NEMA 7
Explosion Proof
-24 NEMA 4
Watertight
-25 NEMA 5
Dust tight
Q-3T-2
Q-3V-2
Q-3T-2
Q4-3V-2
Q4-3T-2
$239.00
239.00
239.00
239.00
266.00
356.00
437.00
562.00
780.00
1,237.00
1,927.00
$244.00
244.00
244.00
244.00
271.00
361.00
442.00
567.00
787.00
1,244.00
1,932.00
$241.00
241.00
241.00
241.00
269.00
358.00
439.00
564.00
784.00
1,240.00
1,930.00
$247.00
247.00
247.00
247.00
273.00
364.00
445.00
569.00
789.00
1,248.00
1,934.00
$257.00
257.00
257.00
257.00
286.00
375.00
455.00
580.00
798.00
1,256.00
1,946.00
S
H
I
P
P
I
N
G
W
E
I
G
H
T
8 lbs.
8 lbs.
8 lbs.
8 lbs.
9 lbs.
10 lbs.
12 lbs.
14 lbs.
19 lbs.
26 lbs.
39 lbs.
8 lbs.
8 lbs.
8 lbs.
8 lbs.
9 lbs.
10 lbs.
12 lbs.
14 lbs.
19 lbs.
26 lbs.
39 lbs.
8 lbs.
8 lbs.
8 lbs.
8 lbs.
9 lbs.
10 lbs.
12 lbs.
14 lbs.
19 lbs.
26 lbs.
39 lbs.
8 lbs.
8 lbs.
8 lbs.
8 lbs.
9 lbs.
10 lbs.
12 lbs.
14 lbs.
19 lbs.
26 lbs.
39 lbs.
8 lbs.
8 lbs.
8 lbs.
8 lbs.
9 lbs.
10 lbs.
12 lbs.
14 lbs.
19 lbs.
26 lbs.
39 lbs.
∆P
MODEL
(Valve Type)
Standard
NEMA 1
Minimum
Pressure
Differential
STEAM
HOT WATER
& Aqueous
Liquids
HOT OILS
(Max. Viscosity
400 SSU
30 SAE)
HOT AIR
& Inert Gases
AVAILABLE
VOLTAGES
Explosionproof
NEMA 7
FLUID
TEMPERATURE
(@ 77°F ambient
temperature)
Insulation
NORMALLY CLOSED
5 psi
Q-1-3T Q-1-3T-2 ∆P
150
psi
150
psi
150
psi

150
psi
120/60
240/60
480/60
365˚F
Class H
Insulation
1” Q-1-3T
1” QR-1-3T
• Bronze Packless Solenoid Valves
• For Steam & Hot Fluids
• 2-Way • Piston-Pilot Operated
• 1/8” through 3” NPT • Full Port
• High Temperature Coils to 450°F
• Teflon™ Leakproof Seat Screw (-3T)
•
&
LISTINGS
Q4-1-3T Q4-1-3T-2
5 psi
or
10 psi
∆P
150 psi
or
200 psi
150 psi
or
400 psi
150 psi
or
400 psi
150 psi
or
400 psi
12/60
24/60
120/60
240/60
480/60
12V DC
24V DC
48V DC
115V DC
230V DC
450˚F
Class H
Insulation
Refer to Bulletin 200-Q
QR-1-3T QR-1-3T-2 5 psi
∆P
150
psi
150
psi
150
psi
150
psi
240/60
480/60
450˚F
Class H
Insulation
PRICE SCHEDULE G215
EFFECTIVE may 2015
WEBSITE:
www.gouldvalve.com
E-MAIL:
[email protected]
QR-1-3T QR-1-3T-2
5 psi
or
10 psi
∆P
150 psi
or
200 psi
150 psi
or
300 psi
PAGE 8
150 psi
or
300 psi
150 psi
or
300 psi
12/60
24/60
120/60
240/60
480/60
12V DC
24V DC
48V DC
115V DC
230V DC
450˚F
Class H
Insulation
ORIFICE
PIPE SIZE
{FNPT}
TYPE
LIST
PRICE
Standard
Coil
S
H
I
P
P
I
N
G
W
E
I
G
H
T
9
LIST
PRICE
TYPE
-2 NEMA 7
Explosion Proof
-24 NEMA 4
Watertight
-25 NEMA 5
Dust tight
S
H
I
P
P
I
N
G
W
E
I
G
H
T
1.3
5/8”
1/8”
$191.00
4 lbs.
$271.00
8 lbs.
2.1
5/8”
1/4”
191.00
4 lbs.
271.00
8 lbs.
2.3
5/8”
3/8”
191.00
4 lbs.
271.00
8 lbs.
3.9
5/8”
1/2”
191.00
4 lbs.
271.00
8 lbs.
5.1
7/8”
3/4”
225.00
5 lbs.
305.00
9 lbs.
11.6
1”
1”
316.00
6 lbs.
396.00
10 lbs.
12.1
1
1 /4”
1
1 /4”
406.00
8 lbs.
486.00
12 lbs.
26.0
1 /2”
1
1 /2”
534.00
10 lbs.
614.00
14 lbs.
48.0
2”
2”
764.00
15 lbs.
844.00
19 lbs.
75.0
1
2 /2”
1
2 /2”
1,263.00
22 lbs.
1,343.00
26 lbs.
100.0
3”
3”
1,968.00
35 lbs.
2,048.00
39 lbs.
4 lbs.
$280.00
8 lbs.
1
Q-1-3T
Q-1-3T-2
1.3
5/8”
1/8”
$200.00
2.1
5/8”
1/4”
200.00
4 lbs.
280.00
8 lbs.
2.3
5/8”
3/8”
200.00
4 lbs.
280.00
8 lbs.
8 lbs.
3.9
5/8”
1/2”
200.00
4 lbs.
280.00
5.1
7/8”
3/4”
234.00
5 lbs.
314.00
9 lbs.
11.6
1”
1”
322.00
6 lbs.
402.00
10 lbs.
12.1
1
1 /4”
1
1 /4”
413.00
8 lbs.
493.00
12 lbs.
26.0
1 /2”
1 /2”
544.00
10 lbs.
624.00
14 lbs.
48.0
2”
2”
773.00
75.0
2 /2”
1
Q4-1-3T
1
Q4-1-3T-2
15 lbs.
853.00
19 lbs.
2 /2”
1,273.00
22 lbs.
1,353.00
26 lbs.
3”
1/8”
35 lbs.
2,054.00
39 lbs.
1.3
3”
5/8”
1,974.00
$206.00
4 lbs.
$286.00
8 lbs.
2.1
5/8”
1/4”
206.00
4 lbs.
286.00
8 lbs.
2.3
5/8”
3/8”
206.00
4 lbs.
286.00
8 lbs.
3.9
5/8”
1/2”
206.00
4 lbs.
286.00
8 lbs.
5.1
7/8”
3/4”
238.00
5 lbs.
318.00
9 lbs.
330.00
6 lbs.
410.00
10 lbs.
100.0
NORMALLY OPEN
120/60
Cv
FACTOR
PAGE
1
1
QR-1-3T
QR-1-3T-2
11.6
1”
1”
12.1
11/4”
11/4”
421.00
8 lbs.
501.00
12 lbs.
26.0
1 /2”
1
1 /2”
549.00
10 lbs.
629.00
14 lbs.
778.00
19 lbs.
1
48.0
2”
2”
15 lbs.
858.00
75.0
1
2 /2”
1
2 /2”
1,277.00
22 lbs.
1,357.00
26 lbs.
100.0
3”
3”
1,980.00
35 lbs.
2,060.00
39 lbs.
1.3
5/8”
1/8”
$214.00
4 lbs.
$294.00
8 lbs.
2.1
5/8”
1/4”
214.00
4 lbs.
294.00
8 lbs.
2.3
5/8”
3/8”
214.00
4 lbs.
294.00
8 lbs.
3.9
5/8”
1/2”
214.00
4 lbs.
294.00
8 lbs.
246.00
5 lbs.
326.00
9 lbs.
337.00
6 lbs.
417.00
10 lbs.
12 lbs.
5.1
7/8”
3/4”
11.6
1”
1”
12.1
1
1 /4”
1
1 /4”
427.00
8 lbs.
507.00
26.0
1 /2”
1 /2”
557.00
10 lbs.
637.00
14 lbs.
48.0
2”
2”
784.00
75.0
100.0
1
21/2”
3”
1
QR-1-3T
QR-1-3T-2
15 lbs.
864.00
19 lbs.
21/2”
1,283.00
22 lbs.
1,363.00
26 lbs.
3”
1,988.00
35 lbs.
2,068.00
39 lbs.
∆P
Minimum
Pressure
Differential
MODEL
(Valve Type)
Standard
NEMA 1
B
1/2” BST
BS
• Hydraulic & High Pressure Service
• Bronze Solenoid Valves
• Closing Speed Adjustment &
Manual Open
• Flow Control Adjustment (BL & DL)
• Pressures to 1200psi
See Bulletins 600-B or 620-D
DS
BST
DST
BL
PRICE SCHEDULE G215
EFFECTIVE may 2015
DL
AIR &
Inert Gases
WATER &
Aqueous
Liquids
OILS
(Max. Viscosity
400 SSU or 30 SAE)
B-2
D-2
5 psi
∆P
150
psi
150
psi
150
psi
BS-2
DS-2
10 psi
∆P
400
psi
400
psi
400
psi
BST-2
DST-2
10 psi
∆P
N/A
700
psi
700
psi
BL-2
DL-2
www.gouldvalve.com
BHP
10 psi
∆P
400
psi
700
psi
700
psi
[email protected]
PAGE 10
DHP
DHP-2
240/60
(XS Coil)
12/60
24/60
120/60
240/60
480/60
6V DC
12V DC
24V DC
48V DC
115V DC
230V DC
(XS Coil)
12/60
24/60
120/60
240/60
480/60
12V DC
24V DC
48V DC
115V DC
230V DC
(XS Coil)
120/60
240/60
FLUID
TEMPERATURE
(@ 77°F ambient
temperature)
Insulation
220˚F
Class F
Insulation
220˚F
Class F
Insulation
300˚F
Class F
Insulation
300˚F
Class F
Insulation
480/60
BHP-2
E-MAIL:
120/60
480/60
WEBSITE:
AVAILABLE
VOLTAGES
Explosionproof
NEMA 7
2” D
D
MEDIA • MAXIMUM PRESSURES
20 psi
∆P
N/A
1200
psi
1200
psi
(XS Coil)
12/60
24/60
120/60
240/60
480/60
12V DC
24V DC
48V DC
115V DC
230V DC
300˚F
Class F
Insulation
Cv
FACTOR
ORIFICE
PIPE SIZE
{FNPT}
1.9
2.8
3.3
6.3
11.5
18.0
28.0
50.0
1/2”
1/2”
1/2”
1”
1”
11/4”
11/2”
2”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
1.9
2.8
3.3
6.3
11.5
18.0
28.0
50.0
1/2”
1/2”
1/2”
1”
1”
11/4”
11/2”
2”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
1.9
2.8
3.3
6.3
11.5
18.0
28.0
50.0
1/2”
1/2”
1/2”
1”
1”
11/2”
11/2”
2”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
1.9
2.8
3.3
6.3
11.5
18.0
28.0
50.0
1/2”
1/2”
1/2”
1”
1”
11/2”
11/2”
2”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
1.9
2.8
3.3
6.3
11.5
18.0
28.0
50.0
1/2”
1/2”
1/2”
1”
1”
11/2”
11/2”
2”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
TYPE
B
D
BS
DS
BST
DST
BL
DL
BHP
DHP
LIST
PRICE
Standard
Coil
PAGE
S
H
I
P
P
I
N
G
W
E
I
G
H
T
365.00
365.00
365.00
612.00
624.00
866.00
879.00
1,343.00
5 lbs.
5 lbs.
5 lbs.
12 lbs.
13 lbs.
24 lbs.
26 lbs.
30 lbs.
375.00
375.00
375.00
622.00
634.00
876.00
889.00
1,353.00
5 lbs.
5 lbs.
5 lbs.
12 lbs.
13 lbs.
24 lbs.
26 lbs.
30 lbs.
377.00
377.00
377.00
624.00
636.00
878.00
891.00
1,355.00
5 lbs.
5 lbs.
5 lbs.
12 lbs.
13 lbs.
24 lbs.
26 lbs.
30 lbs.
392.00
392.00
392.00
639.00
652.00
896.00
908.00
1,369.00
5 lbs.
5 lbs.
5 lbs.
12 lbs.
13 lbs.
24 lbs.
26 lbs.
30 lbs.
407.00
407.00
407.00
653.00
665.00
909.00
920.00
1,378.00
5 lbs.
5 lbs.
5 lbs.
12 lbs.
13 lbs.
24 lbs.
26 lbs.
30 lbs.
11
LIST
PRICE
TYPE
-2 NEMA 7
Explosion Proof
-24 NEMA 4
Watertight
-25 NEMA 5
Dust tight
B-2
D-2
BS-2
DS-2
BST-2
DST-2
BL-2
DL-2
BHP-2
DHP-2
S
H
I
P
P
I
N
G
W
E
I
G
H
T
445.00
445.00
445.00
692.00
704.00
946.00
959.00
1,423.00
9 lbs.
9 lbs.
9 lbs.
16 lbs.
17 lbs.
28 lbs.
30 lbs.
34 lbs.
455.00
455.00
455.00
702.00
714.00
956.00
969.00
1,433.00
9 lbs.
9 lbs.
9 lbs.
16 lbs.
17 lbs.
28 lbs.
30 lbs.
34 lbs.
457.00
457.00
457.00
704.00
716.00
958.00
971.00
1,435.00
9 lbs.
9 lbs.
9 lbs.
16 lbs.
17 lbs.
28 lbs.
30 lbs.
34 lbs.
472.00
472.00
472.00
719.00
732.00
976.00
988.00
1,449.00
9 lbs.
9 lbs.
9 lbs.
16 lbs.
17 lbs.
28 lbs.
30 lbs.
34 lbs.
487.00
487.00
487.00
733.00
745.00
989.00
1,000.00
1,458.00
9 lbs.
9 lbs.
9 lbs.
16 lbs.
17 lbs.
28 lbs.
30 lbs.
34 lbs.
∆P
MODEL
(Valve Type)
Standard
NEMA 1
Minimum
Pressure
Differential
COIL SPECIFICATIONS
AIR &
Inert Gases
WATER &
Aqueous
Liquids
OIL
( Max. Viscosity
400 SSU or
30 SAE )
STEAM
Explosionproof
NEMA 7
Not for Use on
QR-3T
QR-3T-2
5 psi
∆P
150
psi
150
psi
150
psi
1” QR-3T
STEAM
See type
QR-1-3T
Not for Use on
STEAM
1/2” BR
QR-3V
• Normally OPEN versions from
Pages 6-7 and 10-11
• Bronze Solenoid Valves
• For General Service: Air, Water
& Oil not to exceed 400 SSU
• 2-Way • Packless (QR Series Only)
• Piston-Pilot Operated
• Teflon™ Leakproof Seat Screw
(QR-3T)
• Viton® Leakproof Seat Screw
(QR-3V)
AVAILABLE
VOLTAGES
QR-3V-2
QR-3T
QR-3T-2
BR
BR-2
5 psi
∆P
10 psi
∆P
150 psi
150 psi
150 psi
See type
QR-1-3T
(Max. Pressure
200 psi)
300
psi
300
psi
300
psi
Not for Use on
STEAM
120/60
240/60
480/60
12/60
24/60
120/60
240/60
480/60
12V DC
24V DC
48V DC
115V DC
230V DC
12/60
24/60
120/60
240/60
480/60
12V DC
24V DC
48V DC
115V DC
230V DC
FLUID
TEMPERATURE
(@ 77°F ambient
temperature)
Insulation
220˚F
Class F
Insulation
220˚F
Class F
Insulation
220˚F
Class F
Insulation
Refer to Bulletins 200-Q, 600-B or 620-D
5 psi
∆P
PRICE SCHEDULE G215
EFFECTIVE may 2015
DR
150
psi
150
psi
150
psi
Not for Use on
STEAM
www.gouldvalve.com
BR
BR-2
E-MAIL:
[email protected]
DR
DR-2
10 psi
∆P
300
psi
PAGE 12
300
psi
300
psi
240/60
480/60
DR-2
WEBSITE:
120/60
Not for Use on
STEAM
12/60
24/60
120/60
240/60
480/60
12V DC
24V DC
48V DC
115V DC
230V DC
220˚F
Class F
Insulation
220˚F
Class F
Insulation
Cv
FACTOR
ORIFICE
PIPE SIZE
{FNPT}
1.3
2.1
2.3
3.9
5.1
11.6
12.1
26.0
48.0
75.0
100.0
1.3
2.1
2.3
3.9
5.1
11.6
12.1
26.0
48.0
75.0
100.0
1.3
2.1
2.3
3.9
5.1
11.6
12.1
26.0
48.0
75.0
100.0
1.9
2.8
3.3
6.3
11.5
18.0
28.0
50.0
5/8”
5/8”
5/8”
5/8”
7/8”
1”
11/4”
11/2”
2”
21/2”
3”
5/8”
5/8”
5/8”
5/8”
7/8”
1”
11/4”
11/2”
2”
21/2”
3”
5/8”
5/8”
5/8”
5/8”
7/8”
1”
11/4”
11/2”
2”
21/2”
3”
1/2”
1/2”
1/2”
1”
1”
11/2”
11/2”
2”
1/8”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
21/2”
3”
1/8”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
21/2”
3”
1/8”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
21/2”
3”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
1.9
2.8
3.3
6.3
11.5
18.0
28.0
50.0
1/2”
1/2”
1/2”
1”
1”
11/2”
11/2”
2”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
PAGE
TYPE
QR-3T
QR-3V
QR-3T
BR
DR
BR
DR
LIST
PRICE
Standard
Coil
S
H
I
P
P
I
N
G
W
E
I
G
H
T
$174.00
174.00
174.00
174.00
202.00
291.00
374.00
500.00
720.00
1,183.00
1,877.00
$180.00
180.00
180.00
180.00
208.00
297.00
380.00
506.00
726.00
1,189.00
1,883.00
$183.00
183.00
183.00
183.00
211.00
302.00
382.00
509.00
729.00
1,192.00
1,887.00
379.00
379.00
379.00
625.00
637.00
880.00
894.00
1,354.00
4 lbs.
4 lbs.
4 lbs.
4 lbs.
5 lbs.
6 lbs.
8 lbs.
10 lbs.
15 lbs.
22 lbs.
35 lbs.
4 lbs.
4 lbs.
4 lbs.
4 lbs.
5 lbs.
6 lbs.
8 lbs.
10 lbs.
15 lbs.
25 lbs.
35 lbs.
4 lbs.
4 lbs.
4 lbs.
4 lbs.
5 lbs.
6 lbs.
8 lbs.
10 lbs.
15 lbs.
22 lbs.
35 lbs.
5 lbs.
5 lbs.
5 lbs.
12 lbs.
13 lbs.
24 lbs.
26 lbs.
30 lbs.
389.00
389.00
389.00
635.00
647.00
890.00
904.00
1,364.00
5 lbs.
5 lbs.
5 lbs.
12 lbs.
13 lbs.
24 lbs.
26 lbs.
30 lbs.
13
LIST
PRICE
TYPE
-2 NEMA 7
Explosion Proof
-24 NEMA 4
Watertight
-25 NEMA 5
Dust tight
QR-3T-2
QR-3V-2
QR-3T-2
BR-2
DR-2
BR-2
DR-2
S
H
I
P
P
I
N
G
W
E
I
G
H
T
$254.00
254.00
254.00
254.00
282.00
371.00
454.00
580.00
800.00
1,263.00
1,957.00
$260.00
260.00
260.00
260.00
288.00
377.00
460.00
586.00
806.00
1,269.00
1,963.00
$263.00
263.00
263.00
263.00
291.00
382.00
462.00
589.00
809.00
1,272.00
1,967.00
459.00
459.00
459.00
705.00
717.00
960.00
974.00
1,434.00
8 lbs.
8 lbs.
8 lbs.
8 lbs.
9 lbs.
10 lbs.
12 lbs.
14 lbs.
19 lbs.
26 lbs.
39 lbs.
8 lbs.
8 lbs.
8 lbs.
8 lbs.
9 lbs.
10 lbs.
12 lbs.
14 lbs.
19 lbs.
26 lbs.
39 lbs.
8 lbs.
8 lbs.
8 lbs.
8 lbs.
9 lbs.
10 lbs.
12 lbs.
14 lbs.
19 lbs.
26 lbs.
39 lbs.
9 lbs.
9 lbs.
9 lbs.
16 lbs.
17 lbs.
28 lbs.
30 lbs.
34 lbs.
469.00
469.00
469.00
715.00
727.00
970.00
984.00
1,444.00
9 lbs.
9 lbs.
9 lbs.
16 lbs.
17 lbs.
28 lbs.
30 lbs.
34 lbs.
∆P
MODEL
(Valve Type)
Minimum
Pressure
Differential
MEDIA • MAXIMUM PRESSURES •
GASOLINE
DIESEL FUEL
#1 and #2
FUEL OILS
COIL SPECIFICATIONS
AVAILABLE
VOLTAGES
FLUID
TEMPERATURE
(@ 77°F ambient
temperature)
Insulation
NORMALLY CLOSED
Q-230
Bronze Construction
NEMA 7 coil enclosures
Explosionproof
5 psi
∆P
100
psi
100
psi
100
psi
120/60
240/60
480/60
77˚F
Class F
Insulation
1” Q-230
2” K-230
Q4-230
• For Gasoline, Diesel Fuel &
#1 & #2 Fuel Oils
• Class 1 Group D Safety Valve
For Hazardous Locations
• NEMA 7 Explosionproof Coil
Enclosure
• Bronze or Stainless Steel
Solenoid Valves
• Normally Closed or Normally Open
• 2-Way • Packless
• Pressures to 150 psi (5psi min ∆P)
• Viton® Seals • Positive Shutoff
• Type Q-230 is Listed for a
pressure range of 5-100psi @ 220°F
Fluid Temperatures
Available Voltages- 120, 240 or
480/60
Bronze Construction
Explosionproof
5 psi
∆P
150
psi
150
psi
150
psi
NORMALLY OPEN
QR-230
Bronze Construction
Explosionproof
5 psi
∆P
150
psi
150
psi
150
psi
NORMALLY CLOSED
Refer to Bulletins 230-Q and 230-K
K-230
PRICE SCHEDULE G215
EFFECTIVE may 2015
Stainless Steel Construction
Explosionproof
5 psi
∆P
150
psi
150
psi
150
psi
NORMALLY OPEN
WEBSITE:
www.gouldvalve.com
E-MAIL:
[email protected]
KR-230
Stainless Steel Construction
Explosionproof
5 psi
∆P
150
psi
PAGE 14
150
psi
150
psi
12/60
24/60
120/60
240/60
480/60
12V DC
24V DC
48V DC
115V DC
230V DC
12/60
24/60
120/60
240/60
480/60
12V DC
24V DC
48V DC
115V DC
230V DC
12/60
24/60
120/60
240/60
480/60
12V DC
24V DC
48V DC
115V DC
230V DC
12/60
24/60
120/60
240/60
480/60
12V DC
24V DC
48V DC
115V DC
230V DC
300˚F
Class F
Insulation
300˚F
Class F
Insulation
300˚F
Class F
Insulation
300˚F
Class F
Insulation
Cv
FACTOR
PAGE
LIST
PRICE
15
SHIPPING
WEIGHT
ORIFICE
PIPE SIZE
1.3
2.1
2.3
3.9
5.1
11.6
12.1
26.0
48.0
75.0
100.0
1.3
2.1
2.3
3.9
5.1
11.6
12.1
26.0
48.0
75.0
100.0
1.3
2.1
2.3
3.9
5.1
11.6
12.1
26.0
48.0
75.0
100.0
1.1
5/8”
5/8”
5/8”
5/8”
7/8”
1”
11/4”
11/2”
2”
21/2”
3”
5/8”
5/8”
5/8”
5/8”
7/8”
1”
11/4”
11/2”
2”
21/2”
3”
5/8”
5/8”
5/8”
5/8”
7/8”
1”
11/4”
11/2”
2”
21/2”
3”
5/8”
1/8”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
21/2”
3”
1/8”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
21/2”
3”
1/8”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
21/2”
3”
1/8”
$ 270.00
270.00
270.00
270.00
305.00
395.00
487.00
623.00
854.00
n/a
n/a
$ 290.00
290.00
290.00
290.00
325.00
415.00
507.00
643.00
874.00
1,350.00
2,049.00
$ 295.00
295.00
295.00
295.00
330.00
420.00
512.00
648.00
879.00
1,375.00
2,074.00
$505.00
8 lbs.
8 lbs.
8 lbs.
8 lbs.
9 lbs.
10 lbs.
12 lbs.
14 lbs.
19 lbs.
–
–
8 lbs.
8 lbs.
8 lbs.
8 lbs.
9 lbs.
10 lbs.
12 lbs.
14 lbs.
19 lbs.
26 lbs.
39 lbs.
8 lbs.
8 lbs.
8 lbs.
8 lbs.
9 lbs.
10 lbs.
12 lbs.
14 lbs.
19 lbs.
26 lbs.
39 lbs.
8 lbs.
2.1
5/8”
1/4”
505.00
8 lbs.
3.2
5/8”
3/8”
567.00
9 lbs.
3.9
5/8”
1/2”
567.00
9 lbs.
7.5
7/8”
3/4”
694.00
10 lbs.
9.9
1”
1”
846.00
11 lbs.
23.0
1
1 /4”
1 /4”
25.0
45.0
{FNPT}
1,642.00
14 lbs.
1 /2”
1
1 /2”
1,766.00
16 lbs.
2”
2”
2,241.00
21 lbs.
1.1
5/8”
1/8”
$518.00
8 lbs.
2.1
5/8”
1/4”
518.00
8 lbs.
3.2
5/8”
3/8”
579.00
9 lbs.
3.9
5/8”
1/2”
579.00
9 lbs.
7.5
7/8”
3/4”
706.00
10 lbs.
1
1
9.9
1”
1”
859.00
11 lbs.
23.0
1
1 /4”
1
1 /4”
1,655.00
14 lbs.
25.0
11/2”
11/2”
1,779.00
16 lbs.
45.0
2”
2”
2,254.00
21 lbs.
PARTS FOR TYPE Q SERIES PISTON-PILOT OPERATED • BRONZE VALVES
Parts For Type M-3V & M-1-3T Series Piston-Pilot Operated • Bronze Valves
REPAIR KITS & ASSEMBLIES
DESCRIPTION
1/8”
m-3V Repair Kit $72.70
m-1-3T Repair Kit 73.50
Piston Ring Compressor Tool 17.00
M-3V Piston assembly 53.40
M-1-3T Piston assembly 55.50
Bonnet assembly 18.40
Pilot Valve
Assembly
1/4”
1/2”
3/4”
1”
1¼”
$72.70 $72.70 $72.70 $79.20 $95.40 $156.80
73.50 73.50
73.50 84.00 100.90 174.40
17.00 17.00
17.00 20.00 22.00
––
53.40 53.40
53.40 59.70 77.80
139.00
55.50 55.50
55.50 65.80 84.80 158.10
18.40 18.40
18.40 19.20 26.40
29.40
Piston
Assembly
1½”
2”
$164.50 $299.50
182.90 326.40
––
––
146.70 277.90
166.60 306.20
49.50 76.90
PARTS
Piston
Spring
Bonnet Seal
(O’ Ring)
Parts for Bronze & Brass Solenoid
Valves:
• Each Repair Kit replaces
ALL INTERNAL PARTS and includes
- Piston Assembly
- Pilot Valve Assembly
- Piston Spring
- Bonnet Seal (where applicable)
• Piston Ring Compressor Tools
available for 1/8” - 1” NPT
• Consult Factory for special parts
• See Page 18 for Replacement Coils
• See Page 19 for Optional Features
and the corresponding Price Adders
PRICE SCHEDULE G215
EFFECTIVE may 2015
WEBSITE:
www.gouldvalve.com
E-MAIL:
[email protected]
PAGE 16
3/8”
DESCRIPTION
1/8”
Valve Body $41.80
Bonnet Ring ––
Bonnet Seal (M-3V)
1.70
Bonnet Seal (M-1-3T)
1.90
Pilot Valve (m-3V) 15.50
Pilot Valve (m-1-3T) 14.00
Piston Spring
2.10
Pilot Valve Seat Screw (m-3V) 25.00
Pilot Valve Seat Screw (m-1-3T) 22.00
Piston Ring & Expander
7.10
Piston Ring Compressor Tool 17.00
Piston (Only)
8.60
Buna N Valve Disc (M-3V)
1.70
Teflon™ Valve Disc (M-1-3T)
6.80
Guide Nut
6.00
1/4”
3/8”
1/2”
$41.80 $38.30
––
––
1.70
1.70
1.90
1.90
15.50 15.50
14.00 14.00
2.10
2.10
25.00 25.00
22.00 22.00
7.10
7.10
17.00 17.00
8.60
8.60
1.70
1.70
6.80
6.80
6.00
6.00
3/4”
$38.30 $47.70
––
––
1.70
1.90
1.90
2.10
15.50 15.50
14.00 14.00
2.10
2.10
25.00 25.00
22.00 22.00
7.10
8.60
17.00 20.00
8.60
10.20
1.70
2.30
6.80 11.40
6.00
8.60
1”
1-1/4” 1-1/2”
2”
$72.50 $119.00 $168.20 $229.40
25.90 33.60 56.80
67.80
––
––
––
3.80
––
––
––
3.90
15.50 15.50 15.50
15.50
14.00 14.00 14.00
14.00
2.10
2.30
2.30
2.30
25.00 25.00 25.00
25.00
22.00 22.00 22.00
22.00
9.80 25.10 26.40
70.70
22.00
––
––
––
22.10 61.80 65.90 142.50
3.50
5.10
6.00
9.50
13.50 27.20 28.90
40.80
12.40 17.00 18.40
25.20
PARTS FOR TYPES B • D SERIES PISTON-PILOT OPERATED • BRONZE VALVES
DESCRIPTION
Normally Closed
N.C. Repair Kit
Steam N.C. Repair Kit (-1)
Oil Major Repair Kit (_L)
N.C. Pilot Valve Assembly
N.C. Bonnet Assembly
Normally Open
N.O. Repair Kit
Steam N.O. Repair Kit (-1)
Pilot Valve Assy. (N.O.)
Bonnet Assembly (N.O.)
Packing & Packing Retainer
Closing Speed Adj. Stem & Nut
Manual Open Adj. Stem & Nut
Flow Control Assy. (BL
Valve Body
Bottom Plug
Seat Ring
Bonnet Seal
Piston Spring
Piston Assembly
Piston (Only)
Pilot Valve Seat Screw
Buna N Valve Disc (Standard)
Teflon™ Valve Disc (Steam)
Disc Screw
Type B
1/4”
3/8”
Type D
1/2”
3/4”
1”
1¼”
1½”
2”
$142.10 $142.10 $142.10 $193.10 $193.10 $251.60 $251.60 $364.20
147.20 147.20 147.20 203.10 203.10 274.50 274.50 395.50
175.70 175.70 175.70 193.10 193.10 251.60 251.60 364.20
22.00 22.00
22.00 22.00
22.00 22.00
22.00 22.00
63.00 63.00
63.00 137.60 137.60 208.30 208.30 378.30
158.10 158.10
163.20 163.20
38.00 38.00
64.30 64.30
8.50
8.50
32.10 32.10
32.10 32.10
33.60 33.60
$238.10 $238.10
37.40 37.40
42.30 42.30
––
––
2.60
2.60
85.40 85.40
40.00 40.00
21.00 21.00
7.70
7.70
1.70
1.70
6.80
6.80
8.00
8.00
158.10 209.10 209.10 267.60 267.60 380.20
163.20 218.70 219.10 290.50 290.50 411.50
38.00 38.00
38.00 38.00
38.00 38.00
64.30 138.70 138.70 209.60 209.60 379.50
8.50
8.50
8.50
8.50
8.50
8.50
32.10 32.10
32.10 32.10
32.10 32.10
32.10 32.10
32.10 32.10
32.10 32.10
––
––
––
––
33.60 ––
PARTS
$238.10 $319.30 $319.30 $489.40 $489.40 $684.80
37.40 37.40
37.40 37.40
37.40 37.40
42.30 42.30
42.30
––
––
––
––
1.70
1.70
1.70
1.70
1.70
2.60
2.60
2.60
2.60
2.60
2.60
85.40 134.70 134.70 193.20 193.20 305.80
40.00 70.70
70.70 98.90
98.90 169.70
21.00 21.00
21.00 21.00
21.00 21.00
7.70 17.00
17.00 28.90
28.90 40.80
1.70
3.50
3.50
6.00
6.00
9.50
6.80 13.50
13.50 28.90
28.90 40.80
8.00 15.50
15.50 26.40
26.40 52.80
DESCRIPTION
Normally Closed
Q-3T Series Repair Kit
Q-3V Series Repair Kit
Q-1-3T Series Repair Kit
Q-230 Series Repair Kit
Piston Ring Compressor Tool
Piston Assembly Q-3T
Piston Assembly Q-3V
Piston Assembly Q-1-3T
Piston Assembly Q-23O
Pilot Valve Assembly (N.C.)
Bonnet Assembly (N.C.)
Coil Can Assembly (N.C.)
NEMA 4-5-7 Coil Housing
Normally Open
QR-3T Series Repair Kit
QR- 3V Series Repair Kit
QR-1-3T Series Repair Kit
QR-230 Series Repair Kit
Pilot Valve Assembly (N.O.)
Bonnet Assembly (N.O.)
Coil Can Assembly (N.O.)
NEMA 4-5-7 Coil Housing
PAGE
17
1/8” & 1/4”
3/8” & 1/2”
$77.20
80.20
82.30
94.00
17.00
51.40
54.40
56.50
68.20
22.00
21.40
40.00
175.00
$77.20
80.20
82.30
94.00
17.00
51.40
54.40
56.50
68.20
22.00
21.40
40.00
175.00
1/8” & 1/4”
3/8” & 1/2”
$93.20
96.20
98.30
110.00
38.00
22.40
45.00
185.00
$93.20
96.20
98.30
110.00
38.00
22.40
45.00
185.00
3/4”
$83.70
86.70
92.80
107.60
20.00
57.70
60.70
66.80
81.60
22.00
22.40
40.00
175.00
3/4”
$99.70
102.70
108.80
123.60
38.00
23.20
45.00
185.00
1”
$ 99.90
102.90
109.90
127.20
22.00
75.80
78.80
85.80
103.10
22.00
29.40
40.00
175.00
1”
$115.90
118.90
125.90
143.20
38.00
30.30
45.00
185.00
1¼”
$165.30
168.30
187.40
203.20
––
141.00
144.00
163.10
178.90
22.00
34.70
40.00
175.00
1¼”
$181.30
184.30
203.40
219.20
38.00
35.50
45.00
185.00
1½”
$173.00
176.00
195.90
219.50
––
148.70
151.70
171.60
195.20
22.00
51.80
40.00
175.00
1½”
$189.00
192.00
211.90
235.50
38.00
52.80
45.00
185.00
2”
$308.00
311.00
339.30
366.40
––
279.90
282.90
311.20
338.30
22.00
80.30
40.00
175.00
2”
$320.20
323.20
351.50
378.60
38.00
81.60
45.00
185.00
2½”
$469.20
472.20
538.20
561.30
––
440.40
443.40
509.40
532.50
22.00
148.80
40.00
175.00
2½”
$480.70
483.70
549.70
572.80
38.00
150.60
45.00
185.00
3”
$764.80
767.80
844.20
866.00
––
734.50
737.50
813.90
835.70
22.00
226.20
40.00
175.00
3”
$774.80
777.80
854.20
876.00
38.00
227.60
45.00
185.00
$168.20
56.80
––
2.30
22.00
25.00
26.40
––
65.90
6.00
28.90
49.50
18.40
$229.40
67.80
3.80
2.30
22.00
25.00
70.70
––
142.50
9.50
40.80
64.90
25.20
$747.80
148.40
4.50
2.30
22.00
25.00
102.60
––
213.00
15.90
84.90
105.00
76.90
$936.20
176.40
6.00
2.30
22.00
25.00
129.60
––
463.90
20.80
100.20
119.00
88.20
PARTS
Valve Body
Bonnet Ring
Bonnet Seal
Piston Spring
Pilot Valve Seat Screw (-3T)
Pilot Valve Seat Screw (-3V)
Piston (Only)
Buna N Valve Disc (Standard)
Teflon® Valve Disc (Steam)
Viton™ Valve Disc (Q-230)
Guide Nut
$41.80
––
1.70
2.10
22.00
25.00
7 .10
15.00
8.60
1.70
6.80
15.50
6.00
$38.30
––
1.70
2.10
22.00
25.00
7.10
17.00
8.60
1.70
6.80
15.50
6.00
$47.70
––
1.90
2.10
22.00
25.00
8.60
20.00
10.20
2.30
11.40
23.20
8.60
$72.50
..$119.00
25.90
33.60
––
––
2.10
2.30
22.00
22.00
25.00
25.00
9.80
25.10
22.00
––
22.10
61.80
3.50
5.10
13.50
27.20
27.80
40.00
12.40
17.00
PARTS FOR DIRECT ACTING • BRONZE & BRASS VALVES
Type B3- Series
Type AD
1/8” • 1/4” • 3/8”
1/4” • 3/8”
1/8” – 1/4”
3/8” • 1/2”
3/4”
1”
1/8” • 1/4” • 3/8”
Normally Closed Repair Kit
$32.50
$45.30
$56.90
$56.90
$57.90
$64.90
$63.70
Normally Open Repair Kit
––
––
––
––
––
––
79.70
Valve Body
55.20
119.00
41.80
38.30
47.70
72.50
65.90
Bonnet Ring
––
––
––
––
––
25.90
––
N.C. Bonnet Assembly
17.00
22.10
21.40
21.40
22.40
29.40
––
15.50
––
––
––
––
––
22.00
Pilot Valve Seat Screw
17.00
––
––
––
––
––
––
Stem Assembly
––
23.20
35.50
35.50
35.50
35.50
––
Standard Bottom Plug
––
––
––
––
––
––
41.70
Bottom Plug (-3T)
––
––
––
––
––
––
52.80
––
––
––
––
––
––
38.00
DESCRIPTION
Type QD
Type F
SERIES Q•QR•B•BR•D•DR
K•KR•KX•KRX•AD•QD
KD•F•FR•G•GR•GX•GRX
REPLACEMENT
COILS FOR VALVE
SERIES
SERIES Q-1• QR-1• K-1• KR-1
KX-1• KRX-1• AD-1• QD-1• KD-1
F-1• FR-1• G-1• GR-1• GX-1• GRX-1
Standard (S) • Extra Strong (XS)
COIL TYPE
High Temperature
Class F
INSULATION
Class H
300°F
MAXIMUM FLUID
TEMPERATURE
450°F
220°F
MAX. FLUID TEMP.
or
365°F
COIL ENCLOSURE ASSEMBLY PARTS
Description
Coil Part No.
Price
Standard (NEMA 1) for Series Q•B•D•K•F•G•GX
Standard Nameplate
Coil Cover Screw
Bottom Assembly
Top Nip
Normally Open Top Nip
Normally Closed (N.C.) Coil Cover
Normally Open (N.O.) Coil Cover
#44
#9
#87
#115-2
#115-3
#89
#89NO
$1.90
2.10
14.10
11.40
12.40
10.80
14.70
Coil Part No.
#1138 (S)
Enclosure Parts for Explosionproof (NEMA 7) •
Watertight (NEMA 4) • Dusttight (NEMA 5)
XP Nameplate
XP Coil Base
N.C. XP Coil Top
N.O. XP Coil Top
End Plate Set (2)
#44-14
A
#42NC
#42NO
#113
$11.40
70.70
72.50
81.50
18.70
*Standard (NEMA 1) for Series B3-21 • BH-19
Standard Nameplate
Coil Pal Nut
Coil Cover
Top Nip
Bottom Nip
End Plate Set (2)
#44
#6-15
#480
#483
#482-2
#484
$1.90
2.10
10.20
3.80
4.70
8.30
FEATURE
Price
$ 70.00
Voltages
120/60
Coil Part No.
#1143
#1386 (XS)
82.00
120/60
#1143
97.00
#1139 (S)
70.00
240/60
#1142
97.00
#1224 (XS)
82.00
240/60
#1142
97.00
#1140 (S)
70.00
480/60
#1141
97.00
#1387 (XS)
82.00
480/60
#1141
97.00
#1547 (S)
82.00
12/60
#2540
108.00
#L555 (S)
82.00
24/60
#1144
108.00
#L757 (S)
82.00
55/60
––
#1797 (XS)
95.00
550/60
#1145
108.00
#1314 (XS)
82.00
12V DC
#1314H
108.00
#1315 (XS)
82.00
24V DC
#1751
108.00
#1149 (S)
82.00
32V DC
#1751
108.00
#1542 (S)
108.00
48V DC
#1542
108.00
#1349 (S)
82.00
115V DC
#1695
108.00
#1350 (S)
82.00
230V DC
#1696
108.00
Price
$ 97.00
––
* NOTE: Coil Can Assembly is included with Series B3-19 & BH-19 Replacement Coils
• OPERATING VOLTAGE RANGE:
+10% TO -15% of Listed
Nominal Voltage
• STANDARD LEAD WIRES are 18”
• SPECIAL VOLTAGE COILS can be
furnished for most requirements
SERIES
M-3V & M-1-3T
Standard
Class H
M-3V: 300°F
M-1-3T: 450°F
M-3V: 220°F
M-1-3T: 356°F
SERIES
B3-21
SERIES
BH-19
INSULATION
Standard
Class F
High Temperature
Class H
MAXIMUM FLUID
TEMPERATURE
300°F
450°F
REPLACEMENT
COILS FOR VALVE
SERIES
COIL TYPE
MAX. FLUID TEMP.
or
N/A
N/A
Coil Part No.
#H1A
Price
$58.00
Voltages
120/60
Coil Part No.
#7501
Price
$58.00
Coil Part No.
#75H1
Price
$90.00
#96012
67.00
120-240/60
#75012
67.00
––
––
#H2A
58.00
240/60
#7502
58.00
#75H2
90.00
#H3A
67.00
480/60
#7503
67.00
#75H3
90.00
#H12A
69.00
12/60
––
––
––
––
WEBSITE:
#H24A
69.00
#7507
69.00
#75H7
90.00
www.gouldvalve.com
24/60
#12HD
69.00
12V DC
#12750
69.00
#75H12
90.00
#24HD
69.00
24V DC
#24750
69.00
––
––
#48HD
69.00
48V DC
#48750
69.00
––
––
#115HD
69.00
115V DC
#115750
69.00
––
––
#230HD
69.00
230V DC
#23750
69.00
––
––
PRICE SCHEDULE G215
EFFECTIVE may 2015
E-MAIL:
[email protected]
PAGE 18
Dual Voltage
OPTIONAL FEATURES
DESCRIPTION
RC
1/8” through 1/2” • 3/4” • 1” NPT Piston Ring Compressor Tool
-EP
PAGE
APPLICABLE
TO
SOLENOID VALVE
SERIES
19
LIST
PRICE
Adder
M-Q-K-KX
See Parts
Ethylene Propylene (EP) Valve Disc (DO NOT USE ON OIL)
(Specify Pipe Size: 1/8” through 2”)
M-Q-B-D-K-KX
No Charge
-V
Viton® Valve Disc (Specify Pipe Size: 1/8” through 3”)
M-Q-B-D-K-KX
See Parts
-T
Teflon™ Valve Disc (Standard on STEAM & > 600 psi)
M-Q-B-D-K-KX
See Parts
(Buna N) Leakproof Pilot Valve Seat Screw
M-Q-B-D-K-KX
$ 11.00
(EP) Leakproof Pilot Valve Seat Screw
M-Q-B-D-K-KX
11.00
-3V
Viton® Leakproof P. V. Seat Screw (Service to 250 psi)
M-Q-B-D-K-KX
11.00
-3T
Teflon™ Leakproof P. V. Seat Screw
M-Q-B-D-K-KX
11.00
-5
303 Stainless Steel Pilot Valve Seat Screw
Consult Factory
26.00
-8
Teflon™ Coated Piston (Brass Pistons Only)
M-Q-B-D
36.00
M-Q-B-D-K-KX
263.00
-3B
-3EP
-57
MANUAL RESET (See Catalog Bulletins 210-Q57)
-61
Special Construction for Salt Water/Brackish Water (316 SS Tube)
M-Q-B-D-F-B3-K
7.00
-62
Special Construction for De-ionized Water (Passivate All Welds)
K-KX-G-GX
38.00
-76
Spring-loaded Pilot Valve for VERTICAL MOUNTING (Type M Series)
M SERIES ONLY
24.00
-76
Spring-loaded Pilot Valve for VERTICAL MOUNTING
Q-B-D-K
36.00
-81
SLOW-CLOSE Factory Set-up (Reduces WATER HAMMER)
M-Q-B-D-K-KX
No Charge
-84
QUICK-CLOSE Factory Set-up
M-Q-B-D-K-KX
No Charge
-90
Special Construction for METERED BATCHING
M-Q-B-D-K-KX
$ 13.00
-110
MANUAL OPEN (AIR SERVICE ONLY)
M -110
36.00
-L
Custom Lead Wires (up to 48”) Coils
ALL VALVES
8.00
-MO
Manual Open (Any Compatible Fluid, 2 1/2” & 3” ONLY)
-SW
SOCKET WELD or SOLDER CUP
-TA
TIMING ADJUSTMENT (3” ONLY)
Q
m-Q-B-D-K-KX
Q
144.00
Consult Factory
144.00
Parts For Type K Series Piston-Pilot Operated
303 Stainless Steel Valves
DESCRIPTION
Normally Closed:
PARTS FOR TYPE KX SERIES PISTON-PILOT OPERATED • 316 STAINLESS STEEL VALVES
DESCRIPTION
1/8”
1/4”
3/8”
1/2”
3/4”
1”
1¼”
1½”
2”
K & K-1 Series Repair Kit $195.90 $195.90 $195.90 $195.90 $216.30 $285.40 $558.90 $558.90 $806.70
K-3V Series Repair Kit 206.90 206.90 206.90
Pilot Valve
Assembly
Piston
Assembly
Piston
Spring
227.30 296.40
569.90 569.90
817.70
K-3T & K-1-3T Series Repair Kit 206.90 206.90 206.90 206.90
227.30 296.40
569.90 569.90 817.70
K-230 Series Repair Kit 215.60 215.60 215.60 215.60
239.10 310.70
590.50 590.50 841.80
20.00
K Series Piston assembly 170.40
Bonnet Seal
(O’ Ring)
206.90
20.00
20.00
20.00
170.40 170.40
170.40
––
––
190.80 259.90
K Pilot Valve assembly (N.C.)
22.00
22.00
22.00
22.00
22.00
K Bonnet assembly (N.C.)
64.70
64.70
64.70
64.70
96.20 185.30
Coil Can assembly (N.C.)
40.00
40.00
40.00
NEma 4 • 5 • 7 Coil Housing 175.00 175.00 175.00
Normally Open:
1/8”
1/4”
3/8”
40.00
40.00
22.00
40.00
––
––
526.70 526.70
22.00
22.00
772.70
22.00
336.70 336.70 460.40
40.00
40.00
175.00
175.00 175.00 175.00 175.00
1/2”
3/4”
1”
––
1¼”
1½”
40.00
175.00
• Each Repair Kit replaces
ALL INTERNAL PARTS and
includes
- Piston Assembly
- Pilot Valve Assembly
- Piston Spring
- Bonnet Seat (where applicable)
• Piston Ring Compressor Tools
available for 1/8” - 1/2” NPT
• Consult Factory for special parts
• See Page 18 for Replacement
Coils
• See Page 19for Optional
Features and the corresponding
Price Adders
PRICE SCHEDULE G215
EFFECTIVE may 2015
WEBSITE:
www.gouldvalve.com
E-MAIL:
[email protected]
PAGE 20
21
Normally Closed
1/8”
1/4”
3/8”
1/2”
3/4”
1”
1¼”
1½”
2”
KX & KX-1 Series Repair Kit
$400.00
$400.00
$400.00
$400.00
$423.30
$496.40
$756.80
$756.80
$985.70
KXS Repair Kit
KX-3EP-EP-62 Series Repair Kit
400.00
400.00
400.00
400.00
419.00
419.00
419.00
419.00
423.30
442.30
496.40
515.40
756.80
775.80
756.80
775.80
985.70
1,004.70
KX Piston assembly
201.70
201.70
201.70
201.70
225.00
298.10
551.50
551.50
777.70
KX Series Pilot Valve assy (N.C.)
190.00
190.00
190.00
190.00
190.00
190.00
190.00
190.00
190.00
KX Bonnet assembly (N.C.)
79.20
79.20
79.20
79.20
114.10
221.30
348.20
KXS Bonnet Assembly
87.40
87.40
87.40
87.40
129.80
229.30
348.20
356.40
477.30
Coil Can assembly (N.C.)
40.00
175.00
40.00
175.00
40.00
175.00
40.00
175.00
40.00
175.00
40.00
175.00
356.40
40.00
175.00
40.00
175.00
40.00
175.00
NEma 4 • 5 • 7 Coil Housing
469.20
Normally Open
$995.70
KRX & KRX-1 Series Repair Kit
$410.00
$410.00
$410.00
$410.00
$433.30
$506.40
$766.80
KRX-3T & KRX-1-3T Series Repair Kit
421.00
421.00
421.00
421.00
444.30
517.40
777.80
$766.80
777.80
1,006.70
KRX Pilot Valve Assembly (N.O.)
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
KRX Bonnet Assembly (N.O.)
87.40
87.40
87.40
87.40
129.80
229.30
356.40
356.40
477.30
Coil Can Assembly (N.O.)
45.00
185.00
45.00
185.00
45.00
185.00
45.00
185.00
45.00
185.00
45.00
185.00
45.00
185.00
45.00
185.00
45.00
185.00
$924.90
$988.60
$1,088.00
NEMA 4 • 5 • 7 Coil Housing
PARTS
2”
KR & KR-1 Series Repair Kit $203.20 $203.20 $203.20 $203.20 $222.60 $289.20 $551.70 $551.70 $789.60
PARTS for STAINLESS STEEL
SOLENOID VALVES:
PAGE
Valve Body
$201.70
$201.70
$201.70
$201.70
$290.30
$369.50
Bonnet Ring
57.40
57.40
57.40
57.40
71.30
119.60
––
––
––
––
––
––
––
––
5.30
5.30
8.00
KR-3T & KR-1-3T Series Repair Kit 214.00 214.00 214.00
214.00
277.00 300.00 562.50
562.50
800.40
KX Piston Spring
8.30
8.30
8.30
8.30
8.30
8.30
10.00
10.00
10.00
KR-230 Series Repair Kit 222.30 222.30 222.30
222.30
288.20 313.50 581.90
581.90
823.10
KX Pilot Valve Seat Screw
32.00
32.00
32.00
32.00
32.00
32.00
32.00
43.00
32.00
43.00
32.00
KX-3T Pilot Valve Seat Screw
43.00
43.00
43.00
43.00
43.00
43.00
43.00
KX Piston Ring & Expander
14.30
14.30
14.30
14.30
15.50
33.30
62.90
62.90
81.00
KR Pilot Valve assembly (N.O.)
38.00
38.00
38.00
38.00
38.00
KR Bonnet assembly (N.O.)
63.60
63.60
63.60
63.60
94.40
Coil Can assembly (N.O.)
47.00
47.00
47.00
47.00
47.00
NEma 4 • 5 • 7 Coil Housing 185.00 185.00 185.00
185.00
38.00
38.00
38.00
38.00
180.00 325.70
325.70
444.80
47.00
47.00
47.00
185.00 185.00 1 85.00
185.00
185.00
47.00
Bonnet Seal
––
18.00
18.00
18.00
18.00
––
––
KX Piston (Only)
120.00
120.00
120.00
120.00
130.70
166.60
307.20
––
––
––
307.20
443.90
Teflon™ Valve Disc (Standard)
6.80
6.80
6.80
6.80
11.40
13.50
28.90
28.90
40.80
Disc Screw
21.60
––
21.60
––
21.60
––
21.60
––
28.40
––
––
42.70
––
110.50
––
110.50
––
170.00
Guide Nut
™Teflon is a DuPont Company trademark.
PARTS
Valve Body $201.70 $201.70 $201.70 $201.70 $290.30 $369.50 $924.90 $988.60 $1,088.00
Bonnet Ring
57.40
57.40
57.40
57.40
71.30 119.60
Bonnet Seal
––
––
––
––
––
––
––
5.20
––
5.20
––
PARTS FOR DIRECT ACTING • STAINLESS STEEL VALVES
6.90
Type KD
DESCRIPTION
K Piston Spring
3.40
3.40
3.40
3.40
3.40
3.40
5.20
5.20
5.20
K Pilot Valve Seat Screw
29.60
29.60
29.60
29.60
29.60
29.60
29.60
29.60
29.60
Normally Closed Repair Kit
K-3T Pilot Valve Seat Screw
41.00
41.00
41.00
41.00
41.00
41.00
41.00
41.00
41.00
Normally Open Repair Kit
K Piston Ring & Expander
9.40
9.40
9.40
9.40
10.00
27.70
55.20
55.20
74.00
K Piston (Only)
99.50
99.50
99.50
99.50
108.80 138.00 288.70
288.70
442.30
18.00
18.00
18.00
18.00
Teflon™ Valve Disc (Standard)
6.80
6.80
6.80
Viton® Valve Disc (K-230)
15.50
15.50
Disc Screw
17.90
Guide Nut
––
––
––
––
––
––
6.80
11.40
13.50
28.90
28.90
40.80
15.50
15.50
23.20
27.80
49.50
49.50
64.90
17.90
17.90
17.90
23.50
––
––
––
––
––
––
––
––
40.50 114.00
114.00
175.70
Type G
Type GX
1/8” • 1/4” • 3/8”
1/8” • 1/4” • 3/8”
3/8”
1/2”
3/4”
1”
$41.20
$41.20
$41.20
$42.90
$42.90
$84.90
$269.20
––
––
––
––
––
100.90
279.20
Valve Body
201.70
201.70
201.70
290.30
369.50
82.50
123.70
Bonnet Ring
57.40
57.40
57.40
71.30
119.60
––
––
N.C. Bonnet assembly
64.70
64.70
64.70
96.20
185.30
––
––
––
––
––
––
––
22.00
190.00
41.20
41.20
41.20
42.90
42.90
––
––
Standard Bottom Plug
––
––
––
––
––
62.90
79.20
Bottom Plug ( -3T)
––
––
––
––
––
73.90
90.20
––
––
––
––
––
38.00
200.00
1/8” • 1/4”
Stem assembly
∆P
MODEL
(Valve Type)
Standard
NEMA 1
Minimum
Pressure
Differential
COIL SPECIFICATIONS
AIR &
Inert Gases
WATER &
Aqueous
Liquids
OIL
(Max. Viscosity
400 SSU or
30 SAE)
STEAM
AVAILABLE
VOLTAGES
Explosionproof
NEMA 7
FLUID
TEMPERATURE
(@ 77°F ambient
temperature)
Insulation
NORMALLY CLOSED
K
K-2
5 psi
∆P
150
psi
150
psi
150
psi
Not for
Use on
120/60
240/60
480/60
300˚F
Class F
Insulation
STEAM
12/60 & 24/60
2” K
3/4” KR-2
• 303/304 Stainless Steel Solenoid
Valves
• For Corrosive Non-Hazardous Fluids
• Temperature Range to 300°F
• NEMA 1, 4, 5, or 7 Coil Enclosure
• Standard Teflon™ Seats
• Valve Bodies are 316 Stainless Steel
K
KS
K-2
KS-2
Refer to Bulletin 800-K
KST
KST-2
5 psi
∆P
10 psi
∆P
150
psi
400
psi
20 psi
∆P
N/A
5 psi
∆P
150
psi
150
psi
400
psi
150
psi
400
psi
1000
psi
1000
psi
150
psi
150
psi
See Page
26
Not
Applicable
Not for
Use on
STEAM
See Page
26
NORMALLY OPEN
PRICE SCHEDULE G215
EFFECTIVE may 2015
KR
KR-2
Not for
Use on
WEBSITE:
[email protected]
12/60 & 24/60
120/60
240/60
480/60
12V DC
24V DC
48V DC
115V DC
230V DC
(XS Coil)
12/60 & 24/60
120/60
240/60
480/60
12V DC
24V DC
48V DC
115V DC
230V DC
120/60
240/60
480/60
300˚F
Class F
Insulation
300˚F
Class F
Insulation
300˚F
Class F
Insulation
300˚F
Class F
Insulation
STEAM
www.gouldvalve.com
E-MAIL:
12V DC
24V DC
48V DC
115V DC
230V DC
KR
KR-2
10 psi
∆P
300
psi
300
psi
PAGE 22
300
psi
See Page
26
12/60 & 24/60
120/60
240/60
480/60
12V DC
24V DC
48V DC
115V DC
230V DC
300˚F
Class F
Insulation
Cv
FACTOR
1.1
2.1
3.2
3.9
7.5
9.9
23.0
25.0
45.0
1.1
2.1
3.2
3.9
7.5
9.9
23.0
25.0
45.0
1.1
2.1
3.2
3.9
7.5
9.9
23.0
25.0
45.0
1.1
2.1
3.2
3.9
7.5
9.9
23.0
25.0
45.0
1.1
2.1
3.2
3.9
7.5
9.9
23.0
25.0
45.0
1.1
2.1
3.2
3.9
7.5
9.9
23.0
25.0
45.0
ORIFICE
3/8”
3/8”
1/2”
1/2”
3/4”
1”
11/4”
11/2”
2”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
11/4”
11/2”
2”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
11/4”
11/2”
2”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
11/4”
11/2”
2”
3/8”
3/8”
1/2”
1/2’
3/4”
1”
11/4”
11/2”
2”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
11/4”
11/2”
2”
PIPE SIZE
{FNPT}
1/8”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
1/8”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
1/8”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
1/8”
1/4”
3/8”
1/2”
3/4”
1’
11/4”
11/2”
2”
1/8”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
1/8”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
PAGE
TYPE
K
K
KS
KST
KR
KR
LIST
PRICE
Standard
Coil
$405.00
405.00
468.00
468.00
594.00
740.00
1,532.00
1,649.00
2,118.00
$415.00
415.00
477.00
477.00
602.00
749.00
1,539.00
1,657.00
2,124.00
$419.00
419.00
481.00
481.00
606.00
753.00
1,544.00
1,661.00
2,128.00
$423.00
423.00
485.00
485.00
610.00
757.00
1,548.00
1,665.00
2,133.00
$423.00
423.00
485.00
485.00
610.00
757.00
1,548.00
1,665.00
2,133.00
$432.00
432.00
494.00
494.00
618.00
765.00
1,556.00
1,674.00
2,141.00
S
H
I
P
P
I
N
G
W
E
I
G
H
T
4 lbs.
4 lbs.
5 lbs.
5 lbs.
6 lbs.
7 lbs.
12 lbs.
12 lbs.
17 lbs.
4 lbs.
4 lbs.
5 lbs.
5 lbs.
6 lbs.
7 lbs.
12 lbs.
12 lbs.
17 lbs.
4 lbs.
4 lbs.
5 lbs.
5 lbs.
6 lbs.
7 lbs.
12 lbs.
12 lbs.
17 lbs.
4 lbs.
4 lbs.
5 lbs.
5 lbs.
6 lbs.
7 lbs.
12 lbs.
12 lbs.
17 lbs.
4 lbs.
4 lbs.
5 lbs.
5 lbs.
6 lbs.
7 lbs.
12 lbs.
12 lbs.
17 lbs.
4 lbs.
4 lbs.
5 lbs.
5 lbs.
6 lbs.
7 lbs.
12 lbs.
12 lbs.
17 lbs.
23
LIST
PRICE
TYPE
-2 NEMA 7
Explosion Proof
-24 NEMA 4
Watertight
-25 NEMA 5
Dust tight
K-2
K-2
KS-2
KST-2
KR-2
KR-2
$485.00
485.00
548.00
548.00
674.00
820.00
1,612.00
1,729.00
2,198.00
$495.00
495.00
557.00
557.00
682.00
829.00
1,619.00
1,737.00
2,204.00
$499.00
499.00
561.00
561.00
686.00
833.00
1,624.00
1,741.00
2,208.00
$503.00
503.00
565.00
565.00
690.00
837.00
1,628.00
1,745.00
2,213.00
$503.00
503.00
565.00
565.00
690.00
837.00
1,628.00
1,745.00
2,213.00
$512.00
512.00
574.00
574.00
698.00
845.00
1,636.00
1,754.00
2,221.00
S
H
I
P
P
I
N
G
W
E
I
G
H
T
8 lbs.
8 lbs.
9 lbs.
9 lbs.
10 lbs.
11 lbs.
16 lbs.
16 lbs.
21 lbs.
8 lbs.
8 lbs.
9 lbs.
9 lbs.
10 lbs.
11 lbs.
16 lbs.
16 lbs.
21 lbs.
8 lbs.
8 lbs.
9 lbs.
9 lbs.
10 lbs.
11 lbs.
16 lbs.
16 lbs.
21 lbs.
8 lbs.
8 lbs.
9 lbs.
9 lbs.
10 lbs.
11 lbs.
16 lbs.
16 lbs.
21 lbs.
8 lbs.
8 lbs.
9 lbs.
9 lbs.
10 lbs.
11 lbs.
16 lbs.
16 lbs.
21 lbs.
8 lbs.
8 lbs.
9 lbs.
9 lbs.
10 lbs.
11 lbs.
16 lbs.
16 lbs.
21 lbs.
∆P
MODEL
(Valve Type)
Standard
NEMA 1
Minimum
Pressure
Differential
AIR &
Inert Gases
WATER &
Aqueous
Liquids
OIL
COIL SPECIFICATIONS
STEAM
(Maximum Viscosity
400 SSU or
30 SAE)
AVAILABLE
VOLTAGES
Explosionproof
NEMA 7
FLUID
TEMPERATURE
(@ 77°F ambient
temperature)
Insulation
NORMALLY CLOSED
KX
KX-2
5 psi
∆P
60
psi
60
psi
Not for
60
psi
Use on
120/60
240/60
480/60
300˚F
Class F
Insulation
STEAM
3/4” KX-3EP-EP-62
1/2” KRX
• 316 Stainless Steel Solenoid Valves
• For Corrosive Non-Hazardous Fluids
& Applications requiring purity
• All Wetted Parts are 316SS & Teflon™
• Temperature Range to 300°F
• NEMA 1, 4, 5, or 7 Coil Enclosure
KX
KX-2
KX-3EP-EP-62 KX-3EP-EP-62-2
5 psi
∆P
5 psi
∆P
150
psi
150
psi
150
psi
See Page
26
Specially Designed for Use
on Deionized Water
Applications Maximum
Pressure: 150 psi
12/60 & 24/60
120/60
240/60
480/60
12V DC
24V DC
48V DC
115V DC
230V DC
120/60
240/60
480/60
300˚F
Class F
Insulation
300˚F
Class F
Insulation
All Welds are Passivated
KXS
10 psi
KXS-2
∆P
300
psi
300
psi
300
psi
150
psi
150
psi
150
psi
Not
Applicable
12/60 & 24/60
120/60
240/60
480/60
12V DC
24V DC
48V DC
115V DC
230V DC
300˚F
Class F
Insulation
NORMALLY OPEN
PRICE SCHEDULE G215
EFFECTIVE may 2015
KRX
KRX
5 psi
∆P
Not for
Use on
WEBSITE:
[email protected]
240/60
480/60
300˚F
Class F
Insulation
STEAM
www.gouldvalve.com
E-MAIL:
120/60
KRX
KRX-2
5 psi
∆P
150
psi
150
psi
PAGE 24
150
psi
See Page
26
12/60 & 24/60
120/60
240/60
480/60
12V DC
24V DC
48V DC
115V DC
230V DC
300˚F
Class F
Insulation
PAGE
Cv
FACTOR
1.1
2.1
3.2
3.9
7.5
9.9
23.0
25.0
45.0
1.1
2.1
3.2
3.9
7.5
9.9
23.0
25.0
45.0
1.1
2.1
3.2
3.9
7.5
9.9
23.0
25.0
45.0
1.1
2.1
3.2
3.9
7.5
9.9
23.0
25.0
45.0
1.1
2.1
3.2
3.9
7.5
9.9
23.0
25.0
45.0
1.1
2.1
3.2
3.9
7.5
9.9
23.0
25.0
45.0
ORIFICE
3/8”
3/8”
1/2”
1/2”
3/4”
1”
11/4”
11/2”
2”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
11/4”
11/2”
2”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
11/4”
11/2”
2”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
11/4”
11/2”
2”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
11/4”
11/2”
2”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
11/4”
11/2”
2”
PIPE SIZE
{FNPT}
1/8”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
1/8”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
1/8”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
1/8”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
1/8”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
1/8”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
TYPE
KX
KX
KX-3EP-EP-62
KXS
KRX
KRX
LIST
PRICE
Standard
Coil
$531.00
531.00
589.00
589.00
718.00
866.00
1,653.00
1,769.00
2,237.00
$539.00
539.00
597.00
597.00
726.00
873.00
1,659.00
1,776.00
2,244.00
$577.00
577.00
641.00
641.00
766.00
911.00
1,704.00
1,820.00
2,288.00
$573.00
573.00
632.00
632.00
760.00
908.00
1,696.00
1,812.00
2,280.00
$582.00
582.00
641.00
641.00
769.00
917.00
1,704.00
1,821.00
2,288.00
$585.00
585.00
645.00
645.00
773.00
921.00
1,708.00
1,825.00
2,292.00
S
H
I
P
P
I
N
G
W
E
I
G
H
T
4 lbs.
4 lbs.
5 lbs.
5 lbs.
6 lbs.
7 lbs.
12 lbs.
12 lbs.
17 lbs.
4 lbs.
4 lbs.
5 lbs.
5 lbs.
6 lbs.
7 lbs.
12 lbs.
12 lbs.
17 lbs.
4 lbs.
4 lbs.
5 lbs.
5 lbs.
6 lbs.
7 lbs.
12 lbs.
12 lbs.
17 lbs.
4 lbs.
4 lbs.
5 lbs.
5 lbs.
6 lbs.
7 lbs.
12 lbs.
12 lbs.
17 lbs.
4 lbs.
4 lbs.
5 lbs.
5 lbs.
6 lbs.
7 lbs.
12 lbs.
12 lbs.
17 lbs.
4 lbs.
4 lbs.
5 lbs.
5 lbs.
6 lbs.
7 lbs.
12 lbs.
12 lbs.
17 lbs.
25
LIST
PRICE
TYPE
-2 NEMA 7
Explosion Proof
-24 NEMA 4
Watertight
-25 NEMA 5
Dust tight
KX-2
KX-2
KX-3EP
-EP-62-2
KXS-2
KRX-2
KRX-2
$611.00
611.00
669.00
669.00
798.00
946.00
1,733.00
1,849.00
2,317.00
$619.00
619.00
677.00
677.00
806.00
953.00
1,739.00
1,856.00
2,324.00
$657.00
657.00
721.00
721.00
846.00
991.00
1,784.00
1,900.00
2,368.00
$653.00
653.00
712.00
712.00
840.00
988.00
1,776.00
1,892.00
2,360.00
$662.00
662.00
721.00
721.00
849.00
997.00
1,784.00
1,901.00
2,368.00
$665.00
665.00
725.00
725.00
853.00
1,001.00
1,788.00
1,905.00
2,372.00
S
H
I
P
P
I
N
G
W
E
I
G
H
T
8 lbs.
8 lbs.
9 lbs.
9 lbs.
10 lbs.
11 lbs.
16 lbs.
16 lbs.
21 lbs.
8 lbs.
8 lbs.
9 lbs.
9 lbs.
10 lbs.
11 lbs.
16 lbs.
16 lbs.
21 lbs.
8 lbs.
8 lbs.
9 lbs.
9 lbs.
10 lbs.
11 lbs.
16 lbs.
16 lbs.
21 lbs.
8 lbs.
8 lbs.
9 lbs.
9 lbs.
10 lbs.
11 lbs.
16 lbs.
16 lbs.
21 lbs.
8 lbs.
8 lbs.
9 lbs.
9 lbs.
10 lbs.
11 lbs.
16 lbs.
16 lbs.
21 lbs.
8 lbs.
8 lbs.
9 lbs.
9 lbs.
10 lbs.
11 lbs.
16 lbs.
16 lbs.
21 lbs.
∆P
MODEL
(Valve Type)
Standard
NEMA 1
Minimum
Pressure
Differential
HOT WATER
STEAM
&
Aqueous
Liquids
HOT OILS
(Maximum Viscosity
400 SSU
30 SAE)
HOT AIR &
Inert Gases
AVAILABLE
VOLTAGES
Explosionproof
NEMA 7
FLUID
TEMPERATURE
(@ 77°F ambient
temperature)
Insulation
NORMALLY CLOSED
K-1
303 Stainless
Steel
K-1-2
303 Stainless
Steel
5 psi
∆P
150
psi
150
psi
150
psi
150
psi
1/2” K-1-2
2” K-1
• 303 or 316 Stainless Steel
Solenoid Valves
• For Steam & Hot Fluids
• High Temperature Coils to 450°F
• Standard Teflon™ Seats
K-1
303 Stainless
Steel
K-1-2
303 Stainless
Steel
5 psi
or
10 psi
∆P
150 psi
or
150 psi
or
200 psi
200 psi
150
psi
150
psi
150 psi
or
200 psi
150 psi
or
200 psi
KR-1
303 Stainless
Steel
KR-1
KR-1-2 5 psi
303 Stainless
∆P
Steel
KR-1-2
303 Stainless
Steel
5 psi
or
10 psi
∆P
150 psi
or
200 psi
150 psi
or
300 psi
150
psi
150 psi
or
300 psi
150
psi
150 psi
or
300 psi
NORMALLY CLOSED
EFFECTIVE may 2015
WEBSITE:
KX-1
316 Stainless
Steel
KX-1-2 5 psi
316 Stainless
∆P
Steel
150
psi
150
psi
150
psi
150
psi
NORMALLY OPEN
www.gouldvalve.com
E-MAIL:
[email protected]
240/60
480/60
12/60 & 24/60
120/60
240/60
480/60
450˚F
Class H
Insulation
450˚F
12V DC
24V DC
48V DC
115V DC
230V DC
Class H
Insulation
120/60
450˚F
NORMALLY OPEN
303 Stainless
Steel
PRICE SCHEDULE G215
120/60
KRX-1 KRX-1-2 5 psi
316 Stainless 316 Stainless
∆P
Steel
Steel
150
psi
150
psi
PAGE 26
150
psi
150
psi
240/60
480/60
12/60 & 24/60
120/60
240/60
480/60
12V DC
24V DC
48V DC
115V DC
230V DC
12/60 & 24/60
120/60
240/60
480/60
12V DC
24V DC
48V DC
115V DC
230V DC
12/60 & 24/60
120/60
240/60
480/60
12V DC
24V DC
48V DC
115V DC
230V DC
Class H
Insulation
450˚F
Class H
Insulation
450˚F
Class H
Insulation
450˚F
Class H
Insulation
Cv
FACTOR
1.1
2.1
3.2
3.9
7.5
9.9
23.0
25.0
45.0
1.1
2.1
3.2
3.9
7.5
9.9
23.0
25.0
45.0
1.1
2.1
3.2
3.9
7.5
9.9
23.0
25.0
45.0
1.1
2.1
3.2
3.9
7.5
9.9
23.0
25.0
45.0
1.1
2.1
3.2
3.9
7.5
9.9
23.0
25.0
45.0
1.1
2.1
3.2
3.9
7.5
9.9
23.0
25.0
45.0
ORIFICE
3/8”
3/8”
1/2”
1/2”
3/4”
1”
11/4”
11/2”
2”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
11/4”
11/2”
2”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
11/4”
11/2”
2”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
11/4”
11/2”
2”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
11/4”
11/2”
2”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
11/4”
11/2”
2”
PIPE SIZE
{FNPT}
1/8”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
1/8”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
1/8”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
1/8”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
1/8”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
1/8”
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
TYPE
K-1
K-1
KR-1
KR-1
KX-1
KRX-1
LIST
PRICE
Standard
Coil
$429.00
429.00
490.00
490.00
615.00
763.00
1,554.00
1,671.00
2,138.00
$437.00
437.00
500.00
500.00
625.00
771.00
1,563.00
1,680.00
2,148.00
$449.00
449.00
513.00
513.00
637.00
784.00
1,577.00
1,693.00
2,161.00
$459.00
459.00
522.00
522.00
647.00
793.00
1,587.00
1,701.00
2,169.00
$554.00
554.00
616.00
616.00
739.00
888.00
1,679.00
1,795.00
2,263.00
$605.00
605.00
667.00
667.00
790.00
939.00
1,729.00
1,845.00
2,313.00
PAGE
S
H
I
P
P
I
N
G
W
E
I
G
H
T
4 lbs.
4 lbs.
5 lbs.
5 lbs.
6 lbs.
7 lbs.
12 lbs.
12 lbs.
17 lbs.
4 lbs.
4 lbs.
5 lbs.
5 lbs.
6 lbs.
7 lbs.
12 lbs.
12 lbs.
17 lbs.
4 lbs.
4 lbs.
5 lbs.
5 lbs.
6 lbs.
7 lbs.
12 lbs.
12 lbs.
17 lbs.
4 lbs.
4 lbs.
5 lbs.
5 lbs.
6 lbs.
7 lbs.
12 lbs.
12 lbs.
17 lbs.
4 lbs.
4 lbs.
5 lbs.
5 lbs.
6 lbs.
7 lbs.
12 lbs.
12 lbs.
17 lbs.
4 lbs.
4 lbs.
5 lbs.
5 lbs.
6 lbs.
7 lbs.
12 lbs.
12 lbs.
17 lbs.
27
LIST
PRICE
TYPE
-2 NEMA 7
Explosion Proof
-24 NEMA 4
Watertight
-25 NEMA 5
Dust tight
K-1-2
K-1-2
KR-1-2
KR-1-2
KX-1-2
KRX-1-2
$509.00
509.00
570.00
570.00
695.00
843.00
1,634.00
1,751.00
2,218.00
$517.00
517.00
580.00
580.00
705.00
851.00
1,643.00
1,760.00
2,228.00
$529.00
529.00
593.00
593.00
717.00
864.00
1,657.00
1,773.00
2,241.00
$539.00
539.00
602.00
602.00
727.00
873.00
1,667.00
1,781.00
2,249.00
$634.00
634.00
696.00
696.00
819.00
968.00
1,759.00
1,875.00
2,343.00
$685.00
685.00
747.00
747.00
870.00
1,019.00
1,809.00
1,925.00
2,393.00
S
H
I
P
P
I
N
G
W
E
I
G
H
T
8 lbs.
8 lbs.
9 lbs.
9 lbs.
10 lbs.
11 lbs.
16 lbs.
16 lbs.
21 lbs.
8 lbs.
8 lbs.
9 lbs.
9 lbs.
10 lbs.
11 lbs.
16 lbs.
16 lbs.
21 lbs.
8 lbs.
8 lbs.
9 lbs.
9 lbs.
10 lbs.
11 lbs.
16 lbs.
16 lbs.
21 lbs.
8 lbs.
8 lbs.
9 lbs.
9 lbs.
10 lbs.
11 lbs.
16 lbs.
16 lbs.
21 lbs.
8 lbs.
8 lbs.
9 lbs.
9 lbs.
10 lbs.
11 lbs.
16 lbs.
16 lbs.
21 lbs.
8 lbs.
8 lbs.
9 lbs.
9 lbs.
10 lbs.
11 lbs.
16 lbs.
16 lbs.
21 lbs.
MODEL
(Valve Type)
B3-21
NEMA 1
B3-21
3/8” B3-21
NEMA 1
AIR &
Inert Gases
WATER &
Aqueous
Liquids
LIGHT OILS
(Maximum Viscosity
225 SSU or
15W SAE )
125 psi 125 psi 125 psi
200 psi 125 psi 125 psi
STEAM
See type
BH-19
below
FLUID
TEMPERATURE
AVAILABLE
(@ 77°F ambient
VOLTAGES temperature)
Insulation
120/60
240/60
480/60
See type
BH-19
below
See
Bulletin
3000-B3
100 psi
120/60
240/60
480/60
Cv
FACTOR
ORIFICE
PIPE SIZE
{FNPT}
0.7
3/16”
1/8”
0.7
3/16”
1/4”
0.7
3/16”
3/8”
0.7
3/16”
1/8”
0.7
3/16”
1/4”
0.7
3/16”
3/8”
0.7
3/16”
1/8”
Class H
Insulation
0.7
3/16”
1/4”
0.7
3/16”
3/8”
300˚F
1.2
3/8”
1/4”
2.0
3/8”
3/8”
2.9
5/8”
2.9
300˚F
Class H
Insulation
TYPE
LIST
PRICE
Standard
Coil
PAGE
S
H
I
P
P
I
N
G
W
E
I
G
H
T
B3-21
116.00
2 lbs.
B3-21
119.00
2 lbs.
BH-19
132.00
2 lbs.
$350.00
3 lbs.
350.00
3 lbs.
1/8”
$167.00
5/8”
1/4”
3.6
5/8”
3/8”
3.6
5/8”
1/2”
29
LIST
PRICE
TYPE
-2 NEMA 7
Explosion Proof
-24 NEMA 4
Watertight
-25 NEMA 5
Dust tight
S
H
I
P
P
I
N
G
W
E
I
G
H
T
1/4”AD
BH-19
Direct Acting Solenoid Valve features:
• Zero Pressure Differential
• Bronze & Stainless Steel Solenoid Valves
• 2-Way • 1/8” through 1” NPT
• Normally Closed • Positive Shutoff
Types B3-21 & BH-19 Series features:
• B3-21 for General Service: Air, Water
& Light Oils not to exceed 225 SSU
• BH-19 for Steam
Types AD, QD and KD Series
• For Air, Water, Light Oils & Steam
•Maximum Pressures to 14 psi
• Full Port
• Bronze Construction
(Types AD & QD)
• Stainless Steel Construction
(Types KD)
Refer to Bulletins 1001-QKD & 3000-B3
NEMA 1
Standard
NEMA 1
Explosionproof
NEMA 7
AD
AD-2
See type
B3-21
above
14 psi
7 psi
See type
B3-21
above
10 psi
6 psi
See type
B3-21
above
6 psi
4 psi
14 psi
7 psi
120/60
240/60
480/60
120/60
240/60
QD
QD-2
PRICE SCHEDULE G215
480/60
338˚F
Class H
Insulation
300˚F
Class H
Insulation
www.gouldvalve.com
E-MAIL:
KD
7 lbs.
430.00
7 lbs.
4 lbs.
$247.00
8 lbs.
167.00
4 lbs.
247.00
8 lbs.
167.00
4 lbs.
247.00
8 lbs.
167.00
4 lbs.
247.00
8 lbs.
9 lbs.
QD-2
2 psi
1 psi
3 psi
6.8
7/8”
3/4”
195.00
5 lbs.
275.00
2 psi
1 psi
N/A
2 psi
11.5
1”
1”
287.00
6 lbs.
367.00 10 lbs.
1.2
3/8”
1/8”
$415.00
4 lbs.
$495.00
8 lbs.
2.0
3/8”
1/4”
415.00
4 lbs.
495.00
8 lbs.
3.0
1/2”
3/8”
477.00
5 lbs.
557.00
9 lbs.
477.00
5 lbs.
557.00
9 lbs.
7 psi
WEBSITE:
QD
$430.00
AD-2
3 psi
EFFECTIVE may 2015
AD
6 psi
4 psi
7 psi
KD-2
120/60
240/60
480/60
[email protected]
3 psi
2 psi
1 psi
3 psi
PAGE 28
1 psi
1 psi
N/A
1 psi
300˚F
Class H
Insulation
KD
KD-2
3.0
1/2”
1/2”
6.0
3/4”
3/4”
602.00
6 lbs.
682.00 10 lbs.
11.0
1”
1”
749.00
7 lbs.
829 .00 11 lbs.
MODEL
(Valve Type)
Standard
NEMA 1
Explosionproof
NEMA 7
NORMALLY CLOSED
F
F
F-2
F-2
3/8” F
1/4” GR
FST
FST-2
NORMALLY OPEN
Direct Acting Right Angle Valve
features:
• 2-Way • 1/8” – 1/4” – 3/8” NPT
• Fractional Orifices
Type F Series Valves:
• For General Service: Air, Water
& Oil not to exceed 400 SSU
• Brass Construction
Type G Series Valves:
• For Non-Hazardous Corrosive Fluids
• 303 Stainless Steel Construction
• Fluid Temperatures Range:
-200°F to +300°F
Refer to Bulletin 4000-FG
FR
FR
FR-2
FR-2
NORMALLY CLOSED
G
G
G-2
G-2
PRICE SCHEDULE G215
EFFECTIVE may 2015
WEBSITE:
www.gouldvalve.com
GST
GST-2
NORMALLY OPEN
GR
GR-2
E-MAIL:
[email protected]
PAGE 30
GR
GR-2
PORT SIZES
& Cv Factors
Port Size
AIR &
Inert Gases
WATER &
Aqueous
Liquids
LIGHT OILS
(Maximum Viscosity
225 SSU 15W SAE)
STEAM
AVAILABLE
VOLTAGES
FLUID
TEMPERATURE
(@ 77°F ambient
temperature)
Insulation
TYPE
Pipe Sizes
[FNPT]
LIST
PRICE
Standard
Coil
Cv Factor
1/4”
1.20
40
30
15
7/32”
1.00
50
45
24
Not for Use on
3/16”
0.70
120
60
32
STEAM
5/32”
0.50
175
90
45
1/8”
0.30
300
140
75
3/32”
0.18
550
250
130
1/16”
0.08
800
500
230
30
80
110
180
600
20
40
110
200
500
See Type F-1
or
Type F-1-2
120/60
240/60
480/60
*12/60
24/60
55/60
1/4”
1.20
0.70
5/32”
0.50
1/8”
0.30
1/16”
0.08
130
250
360
600
1000
1/4”
1.20
20
15
6
7/32”
1.00
40
25
10
Not for Use on
240/60
3/16”
0.70
60
30
16
STEAM
480/60
5/32”
0.50
90
45
23
1/8”
0.30
150
70
35
3/32”
0.18
270
125
60
1/16”
0.08
300
250
115
1/4”
1.20
40
30
15
7/32”
1.00
50
45
24
Not for Use on
3/16”
0.70
120
60
32
STEAM
5/32”
0.50
175
90
45
1/8”
0.30
300
140
75
3/32”
0.18
550
250
130
1/16”
0.08
800
500
230
30
80
110
180
600
20
40
110
200
500
See Type FR-1
or
Type FR-1-2
*See Various
Voltages Above
See Type G-1
or
Type G-1-2
*12/60
24/60
55/60
0.08
1/4”
1.20
20
15
6
7/32”
1.00
40
25
10
Not for Use on
240/60
3/16”
0.70
60
30
16
STEAM
480/60
5/32”
0.50
90
45
23
1/8”
0.30
150
70
35
3/32”
0.18
270
125
60
1/16”
0.08
300
250
115
0.50
F
139.00
3 lbs.
-2 NEMA 7
Explosion Proof
-24 NEMA 4
Watertight
-25 NEMA t5
Dust tight
F-2
S
H W
I E
P I
P G
I H
N T
G
$210.00
7 lbs.
F-2
219.00
7 lbs.
222.00
7 lbs.
224.00
8 lbs.
231.00
8 lbs.
310.00
7 lbs.
318.00
7 lbs.
320.00
7 lbs.
324.00
8 lbs.
330.00
8 lbs.
1/8”-1/4”-3/8”
1/8”-1/4”-3/8”
FST
142.00
3 lbs.
1/8”-1/4”-3/8”
300˚F
FST-2
1/8”-1/4”-3/8”
FR
144.00
3 lbs.
FR-2
1/8”-1/4”-3/8””
1/8”-1/4”-3/8”
Class F
Insulation
FR
G
151.00
3 lbs.
300˚F
Class F
Insulation
G
230.00
3 lbs.
G-2
1/8”-1/4”-3/8”
238.00
3 lbs.
1/8”-1/4”-3/8”
GST
FR-2
1/8”-1/4”-3/8”
1/8”-1/4”-3/8”
12V DC
24V DC
32V DC
115V DC
230V DC
0.30
5/32”
Class F
Insulation
120/60
240/60
480/60
1/8”
0.70
300˚F
LIST
PRICE
1/8”-1/4”-3/8”
1/8”-1/4”-3/8”
1/16”
1.20
3 lbs.
TYPE
Pipe Sizes
[FNPT]
31
120/60
130
250
360
600
1000
1/4”
$130.00
S
H W
I E
P I
P G
I H
N T
G
1/8”-1/4”-3/8”
12V DC
24V DC
32V DC
115V DC
230V DC
3/16”
3/16”
F
PAGE
G-2
1/8”-1/4”-3/8”
240.00
3 lbs.
1/8”-1/4”-3/8”
GST-2
1/8”-1/4”-3/8”
120/60
See Type GR-1
or
Type GR-1-2
*See Various
Voltages Above
300˚F
GR
244.00
3 lbs.
1/8”-1/4”-3/8”
GR-2
1/8”-1/4”-3/8”
Class F
Insulation
GR
1/8”-1/4”-3/8”
250.00
3 lbs.
GR-2
1/8”-1/4”-3/8”
MODEL
(Valve Type)
Standard
NEMA 1
Explosionproof
NEMA 7
NORMALLY CLOSED
F-1
F-1
1/4” G-1
3/8” FR-1
F-1-2
NORMALLY OPEN
FR-1
features:
• 2-Way • 1/8” - 1/4” - 3/8” NPT
Type F-1 Series Valves:
• For STEAM & Hot Fluids
• Brass Construction
Type G-1 Series Valves:
• For STEAM & Non-hazardous Hot
Corrosive Fluids
• 303 Stainless Steel Construction
F-1-2
FR-1
FR-1-2
FR-1-2
NORMALLY CLOSED
G-1
G-1-2
Refer to Bulletin 4000-FG
G-1
G-1-2
PRICE SCHEDULE G215
EFFECTIVE may 2015
NORMALLY OPEN
GR-1
GR-1-2
WEBSITE:
www.gouldvalve.com
E-MAIL:
[email protected]
PAGE 32
GR-1
GR-1-2
PORT SIZES
& Cv Factors
STEAM
HOT WATER &
Aqueous
Liquids
HOT OIL
(Maximum Viscosity
225 SSU 15W SAE)
HOT AIR &
Inert Gases
Port Size
Cv Factor
1/4”
1.20
40
30
15
40
7/32”
1.00
80
45
24
80
3/16”
0.70
120
60
32
120
5/32”
0.50
200
90
45
150
1/8”
0.30
200
140
75
150
3/32”
0.18
200
250
130
150
1/16”
0.08
200
500
230
150
1/4”
1.20
20
15
6
20
7/32”
1.00
40
25
10
40
3/16”
0.70
60
30
16
60
5/32”
0.50
90
45
23
90
1/8”
0.30
150
70
35
150
3/32”
0.18
200
125
60
150
1/16”
0.08
200
150
150
150
1/4”
1.20
40
30
15
40
7/32”
1.00
80
45
24
80
3/16”
0.70
120
60
32
120
5/32”
0.50
200
90
45
150
1/8”
0.30
200
140
75
150
3/32”
0.18
200
250
130
150
1/16”
0.08
200
500
230
150
1/4”
1.20
20
15
6
20
7/32”
1.00
40
25
10
40
3/16”
0.70
60
30
16
60
5/32”
0.50
90
45
23
90
1/8”
0.30
150
70
35
150
3/32”
0.18
200
125
60
150
1/16”
0.08
200
150
150
150
AVAILABLE
VOLTAGES
120/60
240/60
480/60
*12/60
24/60
55/60
FLUID
TEMPERATURE
(@ 77°F ambient
temperature)
Insulation
Pipe Size
{FNPT}
F-1
450˚F
LIST
PRICE
Standard
Coil
$ 147.00
W
E
I
G
H
T
3 lbs.
1/8” • 1/4” • 3/8”
33
LIST
PRICE
Pipe Size
{FNPT}
-2 NEMA 7
Explosion Proof
-24 NEMA 4
Watertight
-25 NEMA 5
Dust tight
F-1-2
S
H
I
P
P
I
N
G
W
E
I
G
H
T
$227.00
7 lbs.
235.00
7 lbs.
240.00
8 lbs.
247.00
8 lbs.
326.00
7 lbs.
333.00
7 lbs.
340.00
8 lbs.
347.00
8 lbs.
1/8” • 1/4” • 3/8”
Class H
Insulation
F-1
12V DC
24V DC
32V DC
115V DC
230V DC
120/60
240/60
480/60
TYPE
S
H
I
P
P
I
N
G
PAGE
155.00
3 lbs.
1/8” • 1/4” • 3/8”
FR-1
450˚F
F-1-2
1/8” • 1/4” • 3/8”
160.00
3 lbs.
1/8” • 1/4” • 3/8”
FR-1-2
1/8” • 1/4” • 3/8”
Class H
Insulation
*See Various
Voltages Above
FR-1
167.00
3 lbs.
1/8” • 1/4” • 3/8”
120/60
240/60
480/60
*12/60
24/60
55/60
G-1
450˚F
1/8” • 1/4” • 3/8”
246.00
3 lbs.
G-1-2
1/8” • 1/4” • 3/8”
1/8” • 1/4” • 3/8”
Class H
Insulation
G-1
12V DC
24V DC
32V DC
115V DC
230V DC
120/60
240/60
480/60
FR-1-2
253.00
3 lbs.
1/8” • 1/4” • 3/8”
1/8” • 1/4” • 3/8”
GR-1
450˚F
G-1-2
260.00
3 lbs.
1/8” • 1/4” • 3/8”
GR-1-2
1/8” • 1/4” • 3/8”
Class H
Insulation
*See Various
Voltages Above
GR-1
1/8” • 1/4” • 3/8”
267.00
3 lbs.
GR-1-2
1/8” • 1/4” • 3/8”
MODEL
(Valve Type)
Standard
NEMA 1
Explosionproof
NEMA 7
NORMALLY CLOSED
GX
GX
GXS
3/8” GX-2
1/8” GRX-1
features:
• Zero PressureDifferential
• 2-Way • 1/8” - 1/4” - 3/8” NPT
•All Wetted Parts are 316 Stainless Steel
• Fluid Temperatures -200°F to +450°F
Type GX & GX-1 Series Valves:
• Normally Closed
• GX for Non- Hazardous Corrosive
Fluids & Purity Applications
• GX-1 for STEAM & Hot Fluids
Type GRX & GRX-1 Series Valves:
As above except Normally Open
Pressures to 250 psi
Refer to Bulletin 5000-GX
PRICE SCHEDULE G215
EFFECTIVE may 2015
WEBSITE:
www.gouldvalve.com
GRX
PAGE 34
WATER &
Aqueous
Liquids
OIL
(Maximum Viscosity
225 SSU 15W SAE)
15
10
5
3/16”
0.70
30
20
10
5/32”
0.50
45
30
15
1/8”
0.30
60
45
27
GX-2
3/32”
0.18
120
80
40
1/16”
0.08
200
150
75
GXS-2
1/4”
3/16”
5/32”
1/8”
1/16”
1.20
0.70
0.50
0.30
0.08
40
120
175
250
300
30
60
90
140
300
15
32
45
75
230
1/4”
1.20
20
15
6
3/16”
0.70
40
25
10
GX-2
GRX-2
GRX-2
5/32”
0.50
60
30
16
1/8”
0.30
150
70
35
3/32”
0.18
270
125
60
0.08
300
250
115
1/16”
STEAM
AVAILABLE
VOLTAGES
FLUID
TEMPERATURE
(@ 77°F ambient
temperature)
Insulation
TYPE
LIST
PRICE
Standard
Coil
Cv Factor
1.20
Not for Use on
STEAM
See Type GX-1
or
Type GX-1-2
S
H W
I E
P I
P G
I H
N T
G
LIST
PRICE
TYPE
-2 NEMA 7
Explosion Proof
-24 NEMA 4
Watertight
-25 NEMA 5
Dust tight
35
S
H W
I E
P I
P G
I H
N T
G
120/60
240/60
480/60
300˚F
GX
$ 302.00
3 lbs.
1/8” • 1/4”• 3/8”
GX-2
$382.00
7 lbs.
430.00
7 lbs.
435.00
8 lbs.
443.00
8 lbs.
1/8” • 1/4” • 3/8”
Class F
Insulation
*Available Voltages
12V DC
24V DC
32V DC
115V DC
Not for Use on
STEAM
See Type GRX-1
or
Type GRX-1-2
12/60
24/60
55/60
230V DC
* (XS Coil)
120/60
240/60
480/60
(XS Coil)
*See Various Voltages
Above
GXS
1/8” • 1/4” • 3/8”
300˚F
Class F
Insulation
GRX
350.00
3 lbs.
355.00
3 lbs.
1/8” • 1/4”• 3/8”
GRX
GXS-2
1/8” • 1/4”• 3/8”
GRX-2
1/8” • 1/4”• 3/8”
363.00
3 lbs.
1/8” • 1/4”• 3/8”
GRX-2
1/8” • 1/4”• 3/8”
MODEL
(Valve Type)
Standard
NEMA 1
Explosionproof
NEMA 7
NORMALLY CLOSED
GX-1
GX-1
GX-1-2
GX-1-2
NORMALLY OPEN
GRX-1
GRX-1-2
E-MAIL:
[email protected]
Port Size
AIR &
Inert Gases
1/4”
NORMALLY OPEN
GRX
PORT SIZES
& Cv Factors
PAGE
GRX-1
GRX-1-2
PORT SIZES
& Cv Factors
STEAM
HOT WATER &
Aqueous
Liquids
HOT OIL
(Maximum Viscosity
225 SSU 15W SAE)
HOT AIR &
Inert Gases
Port Size
Cv Factor
1/4”
1.20
15
10
5
15
3/16”
0.70
20
15
7
20
5/32”
0.50
30
20
10
30
1/8”
0.30
45
30
15
45
3/32”
0.18
65
45
20
65
1/16”
0.08
120
80
40
120
1/4”
1.20
28
20
7
28
3/16”
0.70
35
25
10
35
5/32”
0.50
50
40
16
50
1/8”
0.30
70
50
25
70
3/32”
0.18
100
70
35
100
1/16”
0.08
150
150
70
150
AVAILABLE
VOLTAGES
120/60
240/60
480/60
Above
120/60
240/60
480/60
Above
FLUID
TEMPERATURE
(@ 77°F ambient
temperature)
Insulation
TYPE
Pipe Sizes
[FNPT]
GX-1
450˚F
LIST
PRICE
Standard
Coil
$ 339.00
S
H W
I E
P I
P G
I H
N T
G
3 lbs.
1/8” • 1/4” • 3/8”
TYPE
Pipe Sizes
[FNPT]
LIST
PRICE
-2 NEMA7
Explosion Proof
-24 NEMA4
Watertight
-25 NEMA5
Dust tight
GX-1-2
S
H W
I E
P I
P G
I H
N T
G
$419.00
7 lbs.
466.00
7 lbs.
451.00
8 lbs.
459.00
8 lbs.
1/8” • 1/4” • 3/8”
Class H
Insulation
GX-1
386.00
3 lbs.
1/8” • 1/4” • 3/8”
450˚F
GRX-1
GX-1-2
1/8” • 1/4” • 3/8”
371.00
3 lbs.
1/8” • 1/4” • 3/8”
GRX-1-2
1/8” • 1/4” • 3/8”
Class H
Insulation
GRX-1
1/8” • 1/4” • 3/8”
379.00
3 lbs.
GRX-1-2
1/8” • 1/4” • 3/8”
PAGE
TERMS AND CONDITIONS OF SALE
The J.D. Gould Company, Inc (herein “seller”) agrees to sell its products on the following terms and conditions of sale which supersede any additional or
inconsistent terms and conditions of purchase of the buyer. Any alterations of the seller’s terms and conditions of sale shall have no force or effect unless
otherwise agreed to in writing.
Terms and conditions of sale as set forth herein, or as modified by written agreement, shall constitute the entire contract between the buyer and the
seller. The failure of either buyer or seller to enforce any rights under the contract of sale shall not constitute a waiver of such rights or any other rights
under the contract of sale.
1. Orders are subject to acceptance by seller in Indianapolis. Prices, discounts, designs and specifications are subject to change without notice. Sales
will be invoiced at prices prevailing at time of shipment. Prices are F.O.B. Indianapolis. Quotations automatically expire thirty (30) calendar days from the
date issued and are subject to termination by notice written within that period. Subject to establishment of satisfactory credit, terms are strictly net cash
37
LIMITED WARRANTY
Subject to the provisions hereinafter set forth, J. D. GOULD COMPANY, INC. “Seller” warrants, solely to its purchaser, “Purchaser,” that at the time of shipment by the Seller, products manufactured by it and which bear its’ nameplate, if properly installed and used, will be free from defects in material or workmanship for a period of one (1) year after the date of the original shipment of the merchandise by Seller. No distributor, dealer or any other entity or person is
authorized to expand or alter this warranty or any other provision of this agreement. Any representation other than the warranties set forth in this agreement
will not bind Seller.
As Purchaser’s sole remedy for a failure of the merchandise during the warranty period for reasons covered under this Limited Warranty, Seller, after
inspection of the merchandise, will either repair or replace, at its sole option, the merchandise and return the merchandise or its replacement, freight collect, to the Purchaser, of with prior written permission of Seller said merchandise is received by Seller, freight prepaid by Purchaser, at Seller’s plant at 4707
Massachusetts Avenue, Indianapolis, Indiana 46218.
Purchaser assumes the full responsibility for the selection of the merchandise to achieve its intended results, and for the installation, use and results
obtained from the merchandise. Purchaser assumes the whole risk for the quality and performance of the merchandise.
thirty days from date of invoice payable in Indianapolis funds. Orders are not subject to cancellation or change in specifications, shipping schedules or
other conditions originally agreed upon without seller’s written consent. All clerical errors are subject to correction.
2. Seller shall not be liable in any way for any delay in shipping due to contingencies beyond its control, or the control of its suppliers or subcontractors, which prevents or interferes with the seller making delivery on the date specified, including but not limited to war, or restraints affecting
shipping, delivery of materials or credit as a result of war or war restrictions, non-arrival, delay or failure to procure materials as a result of war or war
Seller does not warrant that the merchandise will meet with Purchaser’s requirements or that operation of the merchandise will be uninterrupted of
error-free.
This Limited Warranty does not cover damages due to misuse, neglect, tampering, abuse, accident, alteration, repair, usage not in accordance with the
product instructions, or improper installation.
This Limited Warranty does not cover costs relating to the removal or replacement of the merchandise.
restrictions, rationing of fuel, strikes, lockouts, fires, bombing, accidents, floods, droughts and any other contingency affecting the seller, its suppliers
or sub-contractors; and the seller shall have the right to cancel a contract of sale or to extend the shipping date in the event that one or more of such
contingencies prevent or delay shipment. In the event of delayed or extended shipping dates due to the above causes, and the buyer changes shipping
instructions, any additional shipping charges shall be paid by the buyer as a part of the purchase price.
3. In the absence of directions, goods will be shipped by the method and via carrier seller believes dependable. Seller not responsible for loss, delay,
damage or breakage after delivery to the transportation company. All claims for breakage, loss, delay and damage should be made to carriers, but seller
will render buyer all possible assistance in securing satisfactory adjustment of such claims.
4. In the case of returns for repair due to causes not covered by seller’s warranty, the buyer should notify the seller in writing and, after receipt of
shipping advice, the buyer may return it to the J. D. Gould Company, Inc., 4707 Massachusetts Avenue, Indianapolis, Indiana 46218, for prompt attention.
Seller will if possible put such equipment in operating condition at the lowest possible cost. When necessary to make a return give all possible informa-
This Limited Warranty does not apply to merchandise which is used in connection with the transmission of hazardous, toxic and flammable fluids and
gases, unless expressly designated for such use by Seller or indicated on Seller’s label attached to said merchandise, or from which the nameplate has been
removed, defaced or altered, or which has been used other than for general commercial purposes. (The Product is not suitable for residential use.)
Seller shall have the right to inspect all merchandise returned to it or for which Purchaser is making a claim under this Limited Warranty to determine
whether the merchandise is within this Limited Warranty, including, but not limited to the right to determine whether the merchandise is defective, whether
the same has been returned to the Seller within the warranty period, whether the merchandise should be repaired or replaced, and whether there is any evidence of misuse, neglect, tampering, abuse, accident, alteration, repair, usage not in accordance with the product instructions, or improper installation. Any
such determination made by the Seller shall be conclusive and binding upon all interested parties.
Under no circumstances will the Seller be responsible for damages incurred in the shipment to the Seller, or from the Seller, of the merchandise, and the
owner of said merchandise agrees that in the case of any such shipment, the carrier is and shall be his agent for all purposes and under no circumstances the
agent of the Seller.
tion regarding the trouble experienced and complete details of the installation with which the product was used.
Components manufactured by any supplier other than Seller shall bear only that warranty made by the manufacturer of that product.
5. No returns for credit will be accepted unless seller’s permission has been obtained in each case in advance. Only sizes and designs taken from
seller’s regular line which are in active demand can be accepted for credit. Credit will be based on prices prevailing at the time of return, or invoiced
price, whichever is lower, subject to deduction for handling and an additional deduction for expenses incurred in restoring goods to saleable condition.
Obsolete or specially manufactured goods can be accepted for return or credit only at the time an order is submitted with exemption certificates or other
documents acceptable to taxing or customs authorities.
6.
Any manufacturer’s excise tax, use tax, sales tax or tax or duty of any nature whatsoever arising out of or assessed against orders, shall be added to the
prices quoted or invoiced and shall be paid by the buyer; and in the event seller is required to pay any such taxes or duties the buyer shall reimburse seller
therefore unless buyer shall provide seller at the time an order is submitted with exemption certificates or other documents acceptable to taxing or customs
authorities.
7. The contract of sale and the respective rights and obligations of the buyer and seller with regard thereto shall be governed by and construed
according to the laws of the State of Indiana.
8.Attached to each valve sold hereunder which cannot safely be used in the transmission of hazardous, toxic, or flammable liquids or gases or
which is subject to other restrictions on use is an adhesive label containing an appropriate warning. Purchaser agrees to and does hereby indemnify and
hold seller harmless from all liability and expense resulting in whole or in part from the failure of the purchaser to transmit the warning conspicuously to
the ultimate user of said valve or any product in which said valve is incorporated as a part thereof.
EXCEPT AS STATED ABOVE IN THIS AGREEMENT, THE MERCHANDISE IS PROVIDED AS-IS WITHOUT WARRANTY OF ANY KIND AND THE ABOVE
WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTY
OF MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE. SELLER MAKES NO EXPRESS WARRANTIES BEYOND THOSE STATED HEREIN. SELLER
DISCLAIMS ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE WARRANTY OF MERCHANTABILITY, AND
FITNESS FOR A PARTICULAR PURPOSE.
ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE LIMITED WARRANTY PERIOD. NO WARRANTIES APPLY AFTER THAT PERIOD.
REGARDLESS OF WHETHER ANY REMEDY SET FORTH HEREIN FAILS OF ITS ESSENTIAL PURPOSE, IN NO EVENT WILL SELLER BE LIABLE TO PURCHASER
FOR ANY SPECIAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGE, INCLUDING WITHOUT LIMITATION, ANY LOST PROFITS, LOST REVENUES, LOST SAVINGS,
DOWNTIME, GOODWILL, DAMAGE TO OR REPLACEMENT OF EQUIPMENT OR PROPERTY ARISING OUT OF THE USE OF THE MERCHANDISE, OR INABILITY TO
USE THE MERCHANDISE, EITHER SEPARATELY OR IN COMBINATION WITH ANY OTHER EQUIPMENT, AND WHETHER ARISING OUT OF BREACH OF WARRANTY,
BREACH OR CONTRACT, OR OTHERWISE, AND EVEN IF THE SELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
IN NO EVENT WILL SELLER’S LIABILITY OF DAMAGES TO THE PURCHASER EVER EXCEED THE PURCHASE PRICE OF THE MERCHANDISE.
Some states do not allow limitations on the terms of an implied warranty or the exclusion or limitations of special or consequential damages. In such
states, any non-permissible provision of this contract shall be ineffective, but the Limited Warranty shall be valid and enforceable to the greatest extent permissible under the applicable laws of the particular state. Except as specifically unenforceable as to local law as to any particular part thereof, this warranty shall
be governed and construed according to the laws of the State of Indiana. This warranty gives specific legal rights and the original Purchaser may also have
rights which vary from state to state.
PAGE
38
PAGE
Copy and use for Installation
or Inspection / Maintenance
39
SOLENOID VALVE CHECK LISTS
NOTES
The factory recommends that a Maintenance Schedule be established for ALL Solenoid Valves.
A typical Maintenance Interval is 3 months or 10,000 cycles, but actual intervals may vary with media, cycle
rate and velocity of the fluid flowing through the valve. Since occasional inspection and cleaning is desirable,
be sure to add the valves to your own scheduled maintenance program for your system’s components.
________________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________________
INSPECTION / MAINTENANCE Check List:
q External Inspection: Look for signs of external damage, wear and tear or leakage. Close the supply SHUT-OFF VALVE and Energize the SOLENOID VALVE to
de-pressurize the inlet supply line. DISCONNECT Electrical Power before removing the Coil Assembly (Note: the Coil will overheat and burn out if left
Energized without the entire SOLENOID ASSEMBLY in place). Inspect the VALVE BODY externally for leaks or cracks. Check the Bonnet Tube for centricity
and dents or holes. The PLUNGER (Pilot Valve Assembly) should move freely inside.
q Internal Inspection: Remove the BONNET to expose the internal parts of the valve. It is not necessary to remove the VALVE BODY from the line for inspection or repairs.
If the Solenoid Valve has a UNION BONNET, take the Bonnet Nut off, otherwise loosen the Bonnet Hex Nut and remove the BONNET to expose the internal parts.
q Plunger: This part will be inside the tube. The Plunger or Pilot Valve Assembly should move freely in the tube and the point should be nickfree.
q Piston Assembly: Remove the piston assembly. Needlenose pliers may be required. Care should be taken to keep the pliers out of the center hole and grip one side
of the retainer above the hex. The center orifice (Seat Screw) should be round and free of nicks, burrs or erosion. Check that the bore of the VALVE BODY is
clean and not scored or oblong.
q Piston Ring & Expander: Inspect for crimping of the ring if wedged against the cylinder bore. There is a specific order for the Piston Ring & Expander. The stepgapped ring (Gap between .032” - .078”) is against the bore in the piston ring Groove. Behind the Ring is a metal Expander. Larger Solenoid Valves (2”-2½”-3”
NPT) have 2 sets of Piston Rings & Expanders. These go on the top 2 grooves with all gaps opposing. In other words, the Expander gaps would be at 9:00
and 3:00 and the Rings at 3:00 and 9:00, respectively. There is a bottom groove on all Gould Solenoid Valve Pistons to expose the Timing Orifice mentioned
above - this is NOT for a Piston Ring & Expander. PISTON RING COMPRESSOR TOOLS may be purchased for 1⁄8” through ½ • ¾ • 1” NPT Solenoid Valves.
q Replacement Parts: After inspection, replace all worn or damaged parts. MAJOR REPAIR KITS are available from our Stock or from your local Distributor. A Major
Repair Kit replaces ALL internal parts. Refer to individual SOLENOID VALVE BULLETINS for descriptions and part numbers. Some individual REPAIR PARTS
are also available for special repair requirements.
q Cleaning: Valve parts may be cleaned in commercial products like Lime-Away® or CLR™ to remove mineral deposits. Be sure any cleaning solution is compatible
with BOTH the metallic and non-metallic (seats & seals) components. Parts should be rinsed thoroughly in clean, running water before re-assembly.
RENEWABLE valve discs are standard on all Piston Pilot-operated Gould Solenoid Valves.
q Reassemble Valve: Assemble the Solenoid Valve and apply line pressure. Use a soap and water solution to check for any leaks.
q Electrical Operation: Energize the coil and listen for a click when the PLUNGER hits the top of the tube. Check Supply Voltage - it must be within a range of +10%
to -15% of the nominal voltage marked on nameplate.
For Expert Assistance with Your Installation or Maintenance of Gould Solenoid Valves
~ CONTACT GOULD Toll Free (800) 634-6853
E-mail [email protected]
How-to videos: www.youtube.com/user/thevalveman ~
________________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________________
INSTALLATION Check List:
q Location: Gould Solenoid Valves must be installed in a HORIZONTAL line with the Coil Assembly VERTICAL and on TOP.
q Strainer: A minimum 40-mesh STRAINER ahead of the valve is FACTORY RECOMMENDED.
q Preparation: All Piping should be blown clear before installing valves. Apply Teflon® tape (FACTORY RECOMMENDED) or pipe dope sparingly. Pipe dope is NOT
recommended, but if it is used - Do Not Apply to Valve Body.
q Read: Check the nameplate on top of the valve. Are the pressure ratings, voltage and media going through the valve correct? Also, carefully read the Warning
Label. If you have any questions, contact the factory immediately.
________________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________________
Warning: Gould Solenoid Valves are NOT designed for use with volatile or explosive gases and LPG
q Direction: Check that the valve will be in line with the Flow Arrow or IN - OUT stampings on the Valve Body.
q Steam: When using the valve for Steam, the lines should be properly Trapped at the valve inlet.
q Plumbing: Piping should be properly aligned and supported to avoid strain on the Valve Body. Use a Pipe Vise or Pipe Wrench on the pipe and a Wrench on the
valve body’s Hex Pipe Ends. DO NOT use the Coil Assembly or Bonnet Tube as a Lever to tighten piping.
q Wiring: All Coil Enclosures have a 1/2” threaded Conduit Connector. Wiring can be run through the Conduit Connection in the Coil Housing and connected to the
lead wires inside the Coil Cover (except Type M series valves). Connect the Coil Lead Wires to line voltage in accordance with applicable Electrical Codes.
The Lead Wires are not polar, so either may be connected to pos (+) or neg (-). Connect the Green Wire to Ground. Standard NEMA 1 enclosures do not
require a separate wiring Junction Box.
q Dual Voltage Wiring: Type M series Gould Solenoid Valves are available with a Dual Voltage coil (120V or 240V/50-60Hz). Detailed wiring instructions with a
diagram appear on a yellow label affixed to the Dual Voltage Coil.
q Coil Alignment: Standard coil enclosures (NEMA 1 and NEMA 4X) can be rotated to line up the threaded Conduit Connector with the conduit. Just loosen the
screw or nut on top of the coil and turn the coil enclosure, then re-tighten the screw or nut. Other coil housings (like NEMA 7 Explosionproof) are fixed and
cannot be moved, unless they are on valves with Union Bonnets. Rotate the Coil Assembly by Loosening the Bonnet Nut, Positioning it and Retightening it.
q Test: After completing installation, check pipe fittings, castings and around the Bonnet Tube for leaks with a sudsy solution. Energize the Coil and listen for an
audible click as the PLUNGER (Pilot Valve Assembly) hits the top of the tube. Next apply line pressure and cycle the valve to see that it is performing as
expected. Use a pressure gauge or flow meter after the valve, if needed.
For More Details Get our Quick Reference Chart ~ Be sure to visit our website: www.gouldvalve.com
________________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________________
MISSION STATEMENT:
J. D. Gould Company, Inc., founded in 1951,
is a proud manufacturer of American made
Solenoid Valves which are competitively
priced for industrial and commercial
applications.
Our mission is to lead our industry in
Service and Delivery through flexibility, a
workforce of dedicated craftsmen, and an
awareness of our customers’ needs.
QUALITY POLICY:
J. D. Gould Company, Inc. is committed
to continuous improvement, producing
quality products by a capable workforce
using proven vendors to satisfy our
customers’ needs.
J. D. Gould Company, Inc. • P. O. Box 18128 • Indianapolis, IN 46218-0128
(800) 634-6853 • FAX (317) 547-5234
www.gouldvalve.com • email: [email protected]
We Proudly Accept
OR
An ISO 9001:2008
Registered Company

list price schedule

Transcription

Similar documents

Softub T-220 - Softub of the Carolinas

K9 SUPERFUEL TM Human Grade Ingredients

Softub T-140 - Softub of the Carolinas

VFX-9/13 Pneumatic Combination Tool for Polypropylene

Softub T-300 - Softub of the Carolinas

SHRINKFAST.

to learn more! - Office Solutions

SC-2300 spec

DSAW-1831

4´ Kit Trailer