Tecno I.S.A. s.r.l. Via Val Pellice, 74 10060 San Secondo di Pinerolo

Tecno I.S.A. s.r.l.
Via Val Pellice, 74
10060 San Secondo di Pinerolo (TO) Italy
fax
www.tecnoisa.it
+390121500544
+390121501378
e-mail
[email protected]
ftp
See instructions on web page
web
telephone
Tecno I.S.A. s.r.l. - 10060 Via Val Pellice n°74 San Secondo di Pinerolo (TO) – Italy
Tel: +39 0121.500544 / +39 0121.396234 Fax: +39 0121.501378
1
OUR COMPANY
In 1962 was established ISA Stampi and in reason of the more
decennial experience of its owners and the good quality of its
manufacturing, in short time numbered among his customers the
biggest and best Italian companies for moulding of plastic material.
In 1968 the increasing productive demand
and the bigger
dimensions of moulds led on the building of the current plant,
enlarged in 1987 and still now in expansion: now the production
area is almost 2000 sm .
In order to conform to new dynamics of international market, in
February 1991 was founded TecnoISA, powered with a CAD CAM
office and a brand new testing department equipped with checking
software from cad data.
In 1996, with cooperation of specialized consultants, was issued the
Quality Manual in order to improve the quality level of the firm
according to ISO 9001 system.
Still today, thanks to the continue technological development and to
the cooperation of high qualified staff, TecnoISA carries on his
history in research of satisfaction of current and future customers’
requests.
Tecno I.S.A. s.r.l. - 10060 Via Val Pellice n°74 San Secondo di Pinerolo (TO) – Italy
Tel: +39 0121.500544 / +39 0121.396234 Fax: +39 0121.501378
2
ACTIVITIES
Since more than 45 years our firm produces injection moulds,
single and two-components moulds for automotive industry.
We are specialized in building of moulds of aesthetic prestigious
items as dashboards, steering wheels, lower grilles, radiator grilles,
garnishes and internal coverings.
We are able to supply to our customers a completed service for the
product development:
- Cooperation in initial engineering of item, with suggestion
of alternative solutions improving the production management.
- 2D and 3D design
- 3D modelling with surfaces and volumes
- Tool paths creation
- Tooling with C.N.C workstations
- Fitting and polishing
- Mould testing
- Trials
- Dimensional checking of plastic item
- Collaboration in solutions of assembling problems
- Supplying of technical documents and of tool handbooks.
We are able to build moulds till 35000 Kg. of weight with max.
core/cavity dimensions of 2500 x 1100 mm.
Tecno I.S.A. s.r.l. - 10060 Via Val Pellice n°74 San Secondo di Pinerolo (TO) – Italy
Tel: +39 0121.500544 / +39 0121.396234 Fax: +39 0121.501378
3
RESOURCES
Production area
2D Design
3D Design
Tool paths creation
CNC Workstations
Spark machines
Wire EDM
Lathe machines
Grinding machines
Polishing and fitting
Testing machines
Systems
AutoCad Mechanical
Catia V.4
Catia V.5
Catia V.4
Catia V.5
Tebis CAD
Tebis CAM
Tebis WOP
Auton CAM
Sintesi CAM 2 assi
Fidia
Selca
CDM Rovella
ONA
ONA
CNC Z32 DE
Metrolog
Tutor DEA
For data exchanges with the customers we process files in the
following formats:
dwg, dxf, catdrawing, iges, vda, model, catpart, exp, prt and all
Windows and Adobe formats for the texts end pictures management.
Tecno I.S.A. s.r.l. - 10060 Via Val Pellice n°74 San Secondo di Pinerolo (TO) – Italy
Tel: +39 0121.500544 / +39 0121.396234 Fax: +39 0121.501378
4
We design our products with CAD systems
leader in the accomplishment of moulds.
AutoCAD
Mechanical
CATIA V4
CATIA V5
TEBIS CAD
Tecno I.S.A. s.r.l. - 10060 Via Val Pellice n°74 San Secondo di Pinerolo (TO) – Italy
Tel: +39 0121.500544 / +39 0121.396234 Fax: +39 0121.501378
5
Every working step of our moulds
is managed by CAM softwares.
tutte le fasi di lavorazione dei nostri stampi.
TEBIS CAM
AUTON CAM
SINTESI CAM
2 axes
TEBIS WOP
Tecno I.S.A. s.r.l. - 10060 Via Val Pellice n°74 San Secondo di Pinerolo (TO) – Italy
Tel: +39 0121.500544 / +39 0121.396234 Fax: +39 0121.501378
6
We are able to build moulds
till 35000 Kg of weight
with max core/cavity
dimensions
of 2500 x 1100 mm.
In addition
to speeding up
the tooling times,
the high speed
machining guarantees
an excellent
superficial finishing
and higher precision.
All our tooling machines are
equipped with CNC controls
connected directly to the
engineering department.
We are able to realise very
complex manufactures,
both mechanical and of shape,
thanks to an EDM wire and
spark machines department.
Tecno I.S.A. s.r.l. - 10060 Via Val Pellice n°74 San Secondo di Pinerolo (TO) – Italy
Tel: +39 0121.500544 / +39 0121.396234 Fax: +39 0121.501378
7
All our products are tested
by a software controlled
by cad data.
METROLOG
A measurement report is supplied
as a result of test, where all
checked points are verified in
comparison with the cad data.
The test is fulfilled
on the mould;
on request we supply
also measurement
reports of plastic
items.
Tecno I.S.A. s.r.l. - 10060 Via Val Pellice n°74 San Secondo di Pinerolo (TO) – Italy
Tel: +39 0121.500544 / +39 0121.396234 Fax: +39 0121.501378
8
The fitting
department is
composed by
high specialized
operators with
great capability,
skilled at giving
to our products
the loftiest
quality level.
We supply our moulds with
all needful devices in order
to conform them to the
production demand
of our customers.
Moreover we yield the try out
service by trusted moulding
firms, where we assure the
technical support for
solutions of possible
moulding proble ms.
Tecno I.S.A. s.r.l. - 10060 Via Val Pellice n°74 San Secondo di Pinerolo (TO) – Italy
Tel: +39 0121.500544 / +39 0121.396234 Fax: +39 0121.501378
9
Items produced with our moulds
LAMP
OPEL ZAFIRA
STEERING WHEEL
ALFA ROMEO 159
Tecno I.S.A. s.r.l. - 10060 Via Val Pellice n°74 San Secondo di Pinerolo (TO) – Italy
Tel: +39 0121.500544 / +39 0121.396234 Fax: +39 0121.501378
10
Items produced with our moulds
GRILLE FIAT 194
Two-components PP+EPDM
Mould dimensions: 2150 x 940 x 1090
Mould weight: 15000 Kg
TUNNEL COVERING LADA 2123
Mould dimensions: 1900 x 1300 x 1050
Mould weight: 11000 Kg
Tecno I.S.A. s.r.l. - 10060 Via Val Pellice n°74 San Secondo di Pinerolo (TO) – Italy
Tel: +39 0121.500544 / +39 0121.396234 Fax: +39 0121.501378
11
Items produced with our moulds
COWL LOUVER TOP VENTILATOR FIAT 199
Two-components PP+EPDM
Mould dimensions: 2050 x 1228 x 1240
Mould weight: 17000 Kg
Tecno I.S.A. s.r.l. - 10060 Via Val Pellice n°74 San Secondo di Pinerolo (TO) – Italy
Tel: +39 0121.500544 / +39 0121.396234 Fax: +39 0121.501378
12
Items produced with our moulds
REAR BUMPER
FIAT DOBLO’
Tecno I.S.A. s.r.l. - 10060 Via Val Pellice n°74 San Secondo di Pinerolo (TO) – Italy
Tel: +39 0121.500544 / +39 0121.396234 Fax: +39 0121.501378
13
Items produced with our moulds
DASHBOARD FIAT DOBLO’
Mould dimensions: 2390 x 1350 x 1450
Mould weight: 21000 Kg
DASHBOARD INSERT LADA 2112
Mould dimensions: 2040 x 1300 x 1465
Mould weight: 23000 Kg
Tecno I.S.A. s.r.l. - 10060 Via Val Pellice n°74 San Secondo di Pinerolo (TO) – Italy
Tel: +39 0121.500544 / +39 0121.396234 Fax: +39 0121.501378
14
Items produced with our moulds
LOWER GRILLE
TOYOTA COROLLA VERSO
Mould dimensions: 1040 x 570 x 570
Mould weight: 2000 Kg
Tecno I.S.A. s.r.l. - 10060 Via Val Pellice n°74 San Secondo di Pinerolo (TO) – Italy
Tel: +39 0121.500544 / +39 0121.396234 Fax: +39 0121.501378
15
Items produced with our moulds
SPOILER
TOYOTA AURIS
Mould dimensions: 1730 x 650 x 995
Mould weight: 6000 Kg
Tecno I.S.A. s.r.l. - 10060 Via Val Pellice n°74 San Secondo di Pinerolo (TO) – Italy
Tel: +39 0121.500544 / +39 0121.396234 Fax: +39 0121.501378
16
Items produced with our moulds
RADIATOR GRILLE
TOYOTA AURIS
Mould dimensions: 1850 x 800 x 1135
Mould weight: 8500 Kg
RADIATOR GRILLE
TOYOTA COROLLA VERSO
Mould dimensions: 1420 x 575 x 1100
Mould weight: 6000 Kg
Tecno I.S.A. s.r.l. - 10060 Via Val Pellice n°74 San Secondo di Pinerolo (TO) – Italy
Tel: +39 0121.500544 / +39 0121.396234 Fax: +39 0121.501378
17
Items produced with our moulds
COWL LOUVER TOP VENTILATOR
TOYOTA COROLLA VERSO
Mould dimensions: 1540 x 1140 x 1025
Mould weight: 10000 Kg
Tecno I.S.A. s.r.l. - 10060 Via Val Pellice n°74 San Secondo di Pinerolo (TO) – Italy
Tel: +39 0121.500544 / +39 0121.396234 Fax: +39 0121.501378
18
Items produced with our moulds
DASHBOARD DAIMLER ATEGO
Mould dimensions: 2750 x 1640 x 1530
Mould weight: 27000 Kg
Tecno I.S.A. s.r.l. - 10060 Via Val Pellice n°74 San Secondo di Pinerolo (TO) – Italy
Tel: +39 0121.500544 / +39 0121.396234 Fax: +39 0121.501378
19
Items produced with our moulds
FRONT BUMPER LADA NIVA 2123
Mould dimensions: 2600 x 1560 x 1555
Mould weight: 22300 Kg
Tecno I.S.A. s.r.l. - 10060 Via Val Pellice n°74 San Secondo di Pinerolo (TO) – Italy
Tel: +39 0121.500544 / +39 0121.396234 Fax: +39 0121.501378
20