puk disabled card blocked
Transcription
puk disabled card blocked
Crea_Eng.book Page 1 Monday, April 6, 2009 10:20 AM Handset Security Changing Phone Password...................................10-2 Security Functions................................................10-2 USIM PINs .......................................................................... 10-2 Keyguard ............................................................................ 10-3 Password Lock .................................................................... 10-4 Secure Remote Lock............................................................ 10-4 Reject Incoming Calls...........................................10-5 Rejecting Unknown Callers.................................................. 10-5 Rejecting Specific Numbers ................................................. 10-5 Secret Mode Setting ............................................10-6 Reset ....................................................................10-6 10 Reset Settings ..................................................................... 10-6 All Reset ............................................................................. 10-7 10-1 Crea_Eng.book Page 2 Monday, April 6, 2009 10:20 AM Changing Phone Password <Default> 9999 Change Phone Password as required. ! For Phone Password details: ZP.1-26 Main Menu 4 Settings 4 Security 4 Change Password 1 2 3 10 Handset Security 10-2 Security Functions USIM PINs ! For more information about PINs: ZP.1-3 PIN Entry Enter current 4-digit Phone Password Activate to require PIN entry each time handset is turned on. Enter new 4-digit Phone Password Main Menu 4 Settings 4 Security 4 PIN ON/OFF Reenter new Phone Password 1 2 Note ! If Phone Password is incorrectly entered three times, warning message appears. Turn off handset and retry to enter. ON or OFF Enter PIN Note ! When PIN Entry is ON : ・ Signal Indicator may take some time to appear in Standby after entering PIN. ・ Enter PIN to dial emergency numbers (110, 119, 118). Crea_Eng.book Page 3 Monday, April 6, 2009 10:20 AM Changing PINs Change PIN or PIN2. Keyguard ! Activate PIN Entry before changing PIN (ZP.10-2). Lock handset keys to prevent accidental operation. Main Menu 4 Settings 4 Security 4 Change PIN or Change PIN2 1 1 2 3 Enter current PIN/PIN2 ! While locked, In Standby, press and hold 7 ! To cancel: When Standby, Enter new PIN/PIN2 Reenter new PIN/PIN2 appears in Standby. appears in 7 A[YES] Note ! Alternatively, Main Menu 4 Settings 4 Phone Settings 4 Keyguard 4 . ! Emergency numbers (110, 119, 118) are dialable even if Keyguard is PIN Lock or PIN2 Lock is activated if PIN or PIN2 is incorrectly entered three times. Cancel PIN Lock or PIN2 Lock by entering PIN Unblocking Key (PUK/PUK2). activated (number does not appear on Display). To correct misentries, press L, then re-enter number. ! If Keyguard is activated, handset will not power down. Cancel Keyguard then press and hold L. ! For information about PUK/PUK2, contact SoftBank Customer Center, General Information (ZP.16-32). 1 2 3 In PIN lock mode, enter PUK/PUK2 10 Handset Security PIN Lock & Cancellation (PUK/PUK2) Enter new PIN/PIN2 Reenter new PIN/PIN2 Note ! If PUK/PUK2 is incorrectly entered ten times, USIM Card is locked and handset is disabled. Write down PUK/PUK2. ! For procedures required to unlock USIM Card, contact SoftBank Customer Center, General Information (ZP.16-32). 10-3 Crea_Eng.book Page 4 Monday, April 6, 2009 10:20 AM Password Lock Secure Remote Lock <Default> OFF Set Password Lock to require Phone Password after 831P powers up, or after two minutes of inactivity in Standby. ! While Password Lock is set, appears in Standby. Main Menu 4 Settings 4 Security 4 Password Lock 10 Handset Security 10-4 ON or OFF 2 Enter 4-digit Phone Password . Temporary Unlock When ! For service details and user agreement/registration, visit SOFTBANK MOBILE Corp. Website (http://www.softbank.jp) or My SoftBank. Accessing My SoftBank from Handset (Japanese) 1 ! For ON, press If handset is lost or stolen, remotely lock handset from a PC or mobile. If Secure Remote Lock is active, all operations are unavailable except to turn handset on. appears in Standby, enter Phone Password. Note ! Emergency numbers (110, 119, 118) are dialable even when Password Lock is active. ! When Keyguard is set to ON while Password Lock is temporarily deactivated, both Keyguard and Password Lock are activated after two minutes of inactivity in Standby. ( appears.) To cancel both, cancel Keyguard first (ZP.10-3). For service details, visit SOFTBANK MOBILE Corp. Website. Main Menu 4 Yahoo! Keitai 4 Yahoo! Keitai 4 メニューリスト 4 My SoftBank 4 English ! Follow onscreen instructions. Crea_Eng.book Page 5 Monday, April 6, 2009 10:20 AM Reject Incoming Calls Editing/Deleting Numbers in Reject List Highlight a number in the list 7 A[Menu] 7 Edit or Delete ( 7 For Delete, ) Rejecting Unknown Callers <Default> OFF Reject calls from unknown numbers (numbers not saved in Phone Book, blocked Caller ID, pay phones, etc.). Main Menu 4 Settings 4 Call Settings 4 Reject Incoming Calls 1 2 Select an item ON or OFF Add numbers to Reject List to reject specific incoming calls, then set Activate Reject List to ON. Adding Numbers to Reject List <Default> OFF Main Menu 4 Settings 4 Call Settings 4 Reject Incoming Calls 4 Reject List 4 Activate Reject List 1 ON or OFF Calls from Rejected Numbers Handset does not ring/vibrate, but Information window appears. Press to confirm. ! If call is rejected because Caller ID was not sent (Withheld), caller is instructed via voice message or Picture to send ID. Note ! Set 831P to reject all incoming calls or incoming calls while abroad (Call Barring: ZP.2-18). 10 Handset Security Rejecting Specific Numbers Activating Reject List Main Menu 4 Settings 4 Call Settings 4 Reject Incoming Calls 4 Reject List 4 Edit Reject List 1 2 A[Menu] 7 Add 7 Select an item Highlight a phone number in Phone Book/Call Log 7 A[Select], or enter a phone number directly 10-5 Crea_Eng.book Page 6 Monday, April 6, 2009 10:20 AM Secret Mode Setting Reset <Default> OFF Activate Secret Mode to use Secret Phone Book entries. When Secret Mode is active, appears in Standby. ! Saving to Phone Book (ZP.4-3) Main Menu 4 Settings 4 Security 4 Secret Mode 1 2 10 Handset Security 10-6 ON or OFF Enter Phone Password Note ! When Secret Mode is OFF, only numbers/mail addresses appear for incoming communications from Secret entries. Reset Settings Cancel custom settings and return handset functions to their default settings. Main Menu 4 Settings 4 Security 4 Reset 4 Reset Settings 1 2 7 Enter Phone Password 831P automatically turns off and restarts. Note ! Some default settings may not be restored. Crea_Eng.book Page 7 Monday, April 6, 2009 10:20 AM All Reset Cancel custom settings and return handset functions to their default settings; clear all Phone Book/Data Folder entries etc. Main Menu 4 Settings 4 Security 4 Reset 4 All Reset 7 1 2 Enter Phone Password 3 Enter Date 7 Enter Time 831P automatically turns off and restarts. 10 Handset Security Note ! Fully Charge battery ( ) beforehand. ! Phone Password is reset to default. ! USIM Card/Memory Card files are not affected. ! Non-restorable items deleted by All Reset: ・ Customized settings, call logs, downloaded S! Appli, etc. ! Pre-installed S! Appli, Flash®, e-Book files, Graphic Mail Pictures or My Pictograms deleted by user are not recovered by All Reset. 10-7 Crea_Eng.book 10 Handset Security 10-8 Page 8 Monday, April 6, 2009 10:20 AM