730 Digitizer Family

CAEN
Electronic Instrumentation
730 Digitizer Family
14-bit 500 MS/s Digitizer
The 730 is a family of 14-bit, 500 MS/s Flash ADC Waveform Digitizers.
It is available in three form factors: VME (16 input channels), NIM (8 input channels)
and Desktop (8 input channels).
Considering the sampling frequency and the bit number, it is well suited for midfast signals as the ones coming from liquid or inorganic scintillators coupled to
PMTs or Silicon Photomultipliers and others.
The acquisition capabilities of x730 take advantage of the multi-buffer
organization of the memories. The data stream is continuously written in a circular
memory buffer. When the trigger occurs, the digitizer writes further samples for
the post trigger and freezes the buffer that can be read by one of the provided
readout links. The acquisition can continue without any dead time in a new buffer.
Two memory sizes are available according to the different versions of the x730
model: 640 KS/ch or 5.12 MS/ch.
x730 digitizer is provided with FPGAs that can run Digital Pulse Processing (see
box below). In addiction to the existing firmware, CAEN is available to collaborate
with customers to develop custom solutions.
730 family supports multi-board synchronization allowing all ADCs to be
synchronized to a common clock source and ensuring Trigger Time Tag alignment.
Once synchronized, all data will be aligned and coherent across multiple x730 boards.
A common acquisition trigger signal can be provided externally via the front
panel Trigger Input as well as via the software, but it can also be generated
internally thanks to threshold self-trigger capability. The trigger from one board
can be propagated to the other boards through the front.
Highligths
•
•
•
•
•
•
•
•
•
14-bit @ 500 MS/s
Analog inputs on MCX coax. connectors
VME64/VME64X (16 ch.), NIM (8 ch.) and Desktop (8 ch.) modules
0.5 and 2 Vpp input dynamic range with programmable DC offset adj.
Algorithms for Digital Pulse Processing (DPP*)
VME, USB and Optical Link communication interfaces
Multi-board synchronization features
Daisy chain capability
Demo software tools, DPP Control Software, C and LabVIEW libraries
* DPP-PHA available for on-board Pulse Height Analysis
* DPP-PSD available for on-board Pulse Shape Discrimination
* DPP-ZLEplus available for enhanced on-board Zero Length Encoding
Did you Know?
x730 digitizers can run three Digital Pulse Processing firmware for Physics
Applications:
DPP-PHA Digital Pulse Processing for Pulse Height Analysis
x730 digitizer running DPP-PHA firmware accepts
signals directly from Charge Sensitive Preamplifiers or
photomultiplier tubes and implements a digital replacement
of Shaping Amplifier and Peak Sensing ADC (Multi-Channel
Analyzer) by means of digital trapezoidal filters.
DPP-PSD Digital Pulse Processing for Pulse Shape
Discrimination
x730 digitizer running DPP-PSD firmware accepts signals
directly from the detector and implements a digital
replacement of dual gate QDC, discriminator and gate
generator.
DPP-ZLEplus Digital Pulse Processing for the Zero Length
Encoding
x730 digitizer running DPP-ZLE allows the user to transfer the
digitized waveforms in compressed mode, performing an
enhanced Zero Suppression algorithm.
Applications
• Nuclear and Particle Physics
• Dark Matter and Astroparticle Physics
• Fast Neutron spectroscopy
• Homeland Security
USB
An USB 2.0 link is provided in NIM and Desktop
form factors for an easy data readout.
Digital I/O
Digital I/Os are provided in VME boards that can
be used for individual trigger propagation to
external trigger logic. This feature makes VME
form factor ideal to scale up the acquisition
channels where a global trigger generation is
mandatory.
Optical Link
An Optical link is provided in any form factor
for high performance data readout through
CAEN proprietary daisy-chainable CONET
communication protocol.
730 Digitizer Family
Technical Specifications
GENERAL
MEMORY
640 KS/ch or 5.12 MS/ch Multi-Event Buffer with
independent read and write access divisible into
1 ÷ 1024 buffers. Programmable event size and
pre-post trigger
Form Factor
1-unit wide, 6U VME64/VME64X
1-unit wide NIM
154x50x164 mm3 (WxHxD) Desktop
TRIGGER
ANALOG INPUT
Trigger source
Channels
Self-trigger: channel over/under threshold for either
Common or Individual (DPP only) trigger generation
External-trigger: Common by TRG-IN or Individual
by LVDS connectors (DPP Firmware only)
Software-trigger: Common by software command
16 channels, single ended (VME)
8 channels, single ended (NIM, Desktop)
Impedance
50 Ω single ended
Connector
Trigger propagation
MCX
TRG-OUT (VME) / GPO (NIM, Desktop) digital output
Full Scale Range (FSR)
Trigger Time Stamp
0.5 or 2 Vpp software selectable
Programmable DAC for DC offset adjustment.
Range: ±1V
Standard FW, DPP-ZLE: 31-bit counter, 16 ns
resolution, 17 s range(*)
DPP-PHA FW: 30-bit counter, 2 ns resolution
(2 s range), expandable to 64-bit
DPP-CI/PSD FW: 32-bit counter, 2 ns resolution
(9 s range), expandable to 64-bit
DIGITAL CONVERSION
SYNCHRONIZATION
Bandwidth
250 MHz
Offset
Resolution
Clock propagation
14 bits
Daisy chain (VME only) through CLK-IN/CLK-OUT
connectors
One-to-many clock distribution from an external
clock source
Clock Cable delay compensation
Sampling rate
500 MS/s simultaneously on each channel
ADC CLOCK GENERATION
Clock source: internal/external
On-Board PLL provides ADC sampling clock
generation from an internal (50 MHz loc. oscillator)
or external (front panel CLK-IN connector) reference
Acquisition Synchronization
Sync Start/Stop through digital I/O (S-IN, TRG-IN or
GPI input, TRG-OUT or GPO output)
External Trigger Time Stamp reset
LVDS I/O (VME only)
16 general purpose LVDS I/Os controlled by FPGA
Busy, Data Ready, Memory full, Individual Trig-Out
and other functions can be programmed
An Input Pattern from the LVDS I/Os can be
associated to each trigger as an event marker
ANALOG MONITOR (VME only)
12-bit/100 MHz DAC FPGA controlled output with
four operating modes: Trigger Majority / Test Pulses /
Memory Occupancy / Voltage Level
COMMUNICATION INTERFACE
Optical Link
CAEN CONET proprietary protocol, up to 80 MB/s
transfer rate
Daisy chainable: it is possible to connect up to 8/32
ADC modules to a single Optical Link Controller
(Mod. A2818/A3818)
USB (NIM and Desktop direct, VME via V1718 bridge)
USB 2.0 compliant
Transfer rate up to 30 MB/s
VME
VME 64X compliant
Data transfer mode: BLT32, MBLT64 (70 MB/s using
CAEN Bridge), CBLT32/64, 2eVME, 2eSST (up to 200
MB/s)
POWER CONSUMPTIONS
Desktop: TBD
NIM: TBD
VME: 8 A @ +5 V, 600 mA @ +12 V, 600 mA @ -12 V
(*) Trigger Logic and Trigger Time Stamp counter operate at 125 MHz (i.e. 8 ns or 4 ADC clock cycles), while the counter value is read at a frequency of 62.5 MHz (i.e. 16 ns).
Software
Ordering Code
CAEN provides drivers, C and LabVIEW libraries, demo
applications and utilities for the complete management of
the digitizers, from board configuration to data readout and
firmware upgrade.
Windows and Linux 32 and 64 bit operating systems are
both supported.
Code
Description
Form Factor
WDT5730XAAAA
DT5730 - 8 Ch. 14 bit 500 MS/s Digitizer: 640kS/ch, CE30, SE
Desktop
WNT6730XAAAA
N6730 - 8 Ch. 14 bit 500 MS/s Digitizer: 640kS/ch, CE30, SE
NIM
WV1730XAAAAA
V1730 - 16 Ch. 14 bit 500 MS/s Digitizer: 640kS/ch, CE30, SE
6U-VME64
WV1730BXAAAA
V1730B - 16 Ch. 14 bit 500 MS/s Digitizer: 5.12MS/ch, CE30, SE
6U-VME64
WVX1730XAAAA
VX1730 - 16 Ch. 14 bit 500 MS/s Digitizer: 640kS/ch, CE30, SE
6U-VME64X
WVX1730BXAAA
VX1730B - 16 Ch. 14 bit 500 MS/s Digitizer: 5.12MS/ch, CE30, SE
6U-VME64X
Accessories
A2818
A3818
A654
AI2700
PCI CONET Controller
PCI Express CONET2 Controller
MCX to LEMO Cable Adapters
Optical Fiber Series
Cables for CONET1/CONET2 Optical Link Networks
A317
A659
Clock Distribution Cable
MCX to BNC Cable Adapters
Small details
Great differences
CAEN
Tools for Discovery
Copyright © CAEN SpA - 2013
All rights reserved. Information in this publication supersedes all
earlier versions. Specifications subject to change without notice.
Printed in August 2013
CAEN_V1730_28082013_ADOCUME00102
CAEN SpA
CAEN GmbH
CAEN Technologies, Inc.
Via Vetraia 11
55049 - Viareggio • Italy
Phone +39.0584.388.398
Fax +39.0584.388.959
[email protected]
www.caen.it
Klingenstraße 108
42651 - Solingen • Germany
Phone +49.212.2544077
Fax +49.212.2544079
[email protected]
www.caen-de.com
1140 Bay Street - Suite 2C
Staten Island, NY 10305 • USA
Phone +1.718.981.0401
Fax +1.718.556.9185
[email protected]
www.caentechnologies.com