FILTER SYSTEMS

Transcription

FILTER SYSTEMS

FILTER SYSTEMS
M A I N C ATA LO G U E 2 01 6
DISASSEMBLING
GLUEING
We set air in motion
2
Our Hotline
+49 28 63 92 82 0
3
Bienvenue
ၖနအါ
Welcome
to
TEKA
Dear customers and partners of TEKA,
Добро пожало
ов а
Zapraszamy
Velkommen
Benve
΃ϩϝ΍ϭϭαϩϝ
ϝ΍ Välko
omn
Καλώς ήρθατε
Dobrodošli
occupational safety, health and climate protection are on
everyone's lips and continue to gain importance. Clean
air at the workplace plays a key role here. For almost 20
years we dedicate all our energy and passion to it.
We started small but the following development was
fast: Since the foundation of the company in 1995 the
TEKA Absaug- und Entsorgungstechnologie has developed from a two-men operation into a medium-sized
company with more than 100 employees. In the meantime we rank among the world leading companies for
Jürgen Kemper, Director
… all of our
energy and
passion …
suction and filtering technology.
And justifiably so: As our high-quality energy efficient
suction and filtering units ensure that your employees
are able to breathe deeply at their workplace. We achieve
this with our outstanding specialized staff and our excellent and certified products. A lot of our systems were
awarded the coveted quality seal from the Institute for
Occupational Safety and Health of the German Social
Accident Insurance! Even during the worldwide financial
crisis our company always stayed on course.
Our guiding principle has always applied: We wish to
contribute to a future worth living with innovative techcustomized
solutions.
nology as well as with cus
u
Please
yourself!
Plea
e se convince you
ea
urse
s lf!
se
Yours Jürgen
Kemper and
Y
Jü
K
d Erwin Telöken
Directors of TEKA Absaug- und Entsorgungstechnologie GmbH
Welkom
… contribute to
a future
worth living …
Table of contents
Good to know ............................................. 8
IFA Certificate ........................................... 14
IFA-certified
products in this brochure ......................15
1. Mobile and wall-mounted suction and filtering systems ..........................18
HANDYCART
Cartridge filter unit.................................20
STRONGMASTER MV
Mid vacuum system ..............................38
filtoo®
Mechanical filter unit ...........................24
CARTMASTER MV
Mid vacuum system ............................. 40
CAREMASTER-IFA
Mechanical filter unit
with 1 suction element ..........................26
CAREMASTER
Stationary mechanical filter unit
with 1 suction element .........................42
CAREMASTER-IFA
Mechanical filter unit
with 2 suction elements .......................28
CAREMASTER
Stationary mechanical filter unit
with 2 suction elements ..................... 44
STRONGMASTER-IFA
Cartridge filter unit
CARTMASTER-IFA
Stationary cartridge filter unit
with 1 suction element ....................... 46
STRONGMASTER-IFA
with 2 suction elements ...................... 32
CARTMASTER-IFA
Stationary cartridge filter unit
with 2 suction elements ..................... 48
CARTMASTER
Accessories: STAVO
Dust-pre-separator for filtoo ........... 48
CARTMASTER
with 2 suction elements .....................36
Accessories: Automatic cleaning ...... 49
Accessories ...............................................50
2. Sensors .......................................................................................................52
Industry 4.0
Overview .................................................... 52
AirController
WLAN Communication solution........56
AirTracker
Room monitoring system.....................54
SmartFilter & DifCon ............................. 57
3. Central suction and filtering systems................................................................... 58
FILTERCUBE 2N / 2H-IFA
Central filter units .................................. 60
FILTERCUBE 4N / 4H-IFA
Central filter units ..................................62
FILTERCUBE
Mid and high vacuum system .......... 64
ZPF 6H
Central suction and filter unit .............66
ZPF 9H-IFA
DustVac Dust discharge system ........70
Accessories: Spark latch ....................... 72
Accessories: Spark pre-separator ...... 73
Accessories ............................................... 74
ControlUnit
Filter control unit .................................... 75
Wet cyclone separator ..........................76
4. Room ventilation systems .......................................................................................78
AIRTECH P10 ............................................ 80
AIRTECH
Central suction and filter unit ............82
BLOWTEC
Central suction and filter unit ............84
PushPull
Accessories ............................................... 88
Filter cartridges ....................................... 89
Oil mist separators .......................................................................................................90
Oxygen cutting benches.............................................................................................. 92
5. Welding and grinding benches .............................................................................. 94
Suction table ............................................ 96
Accessories ............................................... 99
Welding bench .........................................97
Grinding bench........................................ 98
6. Suction and collecting elements ......................................................................... 100
Suction arm ∅ 150 mm........................102
Telescopic suction arm ........................106
Suction arm ∅ 200 mm ......................104
Special suction hood ............................108
Suction crane .......................................... 105
Accessories ..............................................109
7. Fans and ducting ...................................................................................................... 110
Fan ............................................................... 112
Pipes and silencers .................................119
Mobile exhaust fan ............................... 113
T-pieces ..................................................... 120
Accessories ...............................................114
Reductions ................................................ 121
Hoses and accessories ..........................116
Pipes and moulded parts..................... 117
8. Service ........................................................................................................................ 114
informs
Our company app
Numerous services usable on the go
Get the newest trends and innovations from TEKA for your iPhone or iPad!
Catalogues, products, news – this TEKA company app gives you all information about
t experts of clean air – on the go.
the
I is suitable for Apple products and can be downloaded for free at iTunes using
It
o
our forwarding URL http://www.teka.eu/teka-app.
Download app here!
http://www.teka.eu/teka-app
8
Good to know
What is dust/fume?
The definition of dust/fume applied in this context de-
German framework regulation Ordinance on
Hazardous Substances (GefStoffV) 1
scribes the amount of dispersed, firm particles in the air,
When it came into effect on January 1st, 2005, the Ordi-
which are produced inter alia during thermal processes
nance on Hazardous Substances restructured the occupa-
such as welding.
tional safety for activities involving hazardous substances
as implementation of several EC directives. Welding fume
What is dust/fume?
is considered a hazardous substance, thus the Ordinance
In welding technology dust/ fume and thus hazardous
on Hazardous Substances applies.
substances are produced
due to the use of
base materials
Particles contained in welding fume are inhalable and
respirable and in case of chromium-nickel steel, they are
carcinogenic. The Ordinance on Hazardous Substances
filler materials
requires a local extraction: “Dusts shall be collected and
impurities
disposed of safely at the place of its origin. The extracted
ambient air
during processes such as
evaporation
condensation
oxidation
1
air shall be conducted in such a way that as little dust as
possible passes into the workers' breathing air. The
extracted air may only be returned to the working area if it has been adequately cleaned.
Equipment to separate, collect and precipitate dusts must be state of the art. When
decomposition
these devices are first put into operation,
pyrolisis
it must be checked if they are sufficiently
combustion
effective. At least once a year the devices
must be inspected with respect to their proper
Why is dust/fume dangerous?
functioning, serviced and, if relevant, repaired.
In general, every kind of dust/fume can lead to
The results of the inspections according to the
respiratory diseases (bronchitis, obstructive
bronchitis) resulting from the inhaling
sentences 1 and 2 shall be preserved.” (Annex I
No. 2, § 2.3(5,7))
of dust in a high concentration
and for a longer period.
Dust/fume is particularly dangerous if it
contains hazardous
Mucous membrane of the
nose and throat (> 10 μm)
substances (see ta-
Larynx (4,7 - 5,8 μm)
ble on page 10).
Trachea and main
bronchi (3,3 - 4,7 μm)
Secondary and tertiary
bronchi (1,1 - 3,3 μm)
Alveoli (1,0 μm)
Medical illustration:
Internalisation of particles
of different sizes into the human body
9
Air circulation when dealing with carcinogenic
substances
the required effectiveness. Instructions on the fresh air fraction
If activities are carried out in a working area involving
ventilation – ventilation measures". (2) At workplaces where
hazardous substances of category 1 or 2 which are carcino-
welding work or allied processes involving the emission of
genic, mutagenic or have a negative impact on fertility, the
carcinogenic or mutagenic substances or substances toxic to
extracted air there must not be returned into the working
reproduction of category 1 or 2 are performed (especially with
area. This does not apply if the air has been adequately
the use of chromium- and
decontaminated of such substances using processes or de-
nickel-bearing materials) extracted air must not be recirculated.
in room ventilation systems are given in BGR 121 "Workplace
vices recognised by the authorities or the statutory accident
insurance institutions. The air must then be conducted
This does not apply if type-approved welding fume extrac-
or cleaned in such a way that hazardous substances that
tion devices of the welding fume separation classes W2 or
are carcinogenic, mutagenic and toxic to reproduction do
W3 are used. For instructions concerning the welding fume
not pass into the breathing air of other workers.” (§ 10(5)
separation classes see DIN EN ISO15012- 1 "Health and safety
GefStoffV)
in welding and allied processes – Requirements, testing and
marking of equipment for air filtration – Part 1: Determi-
If the welding fumes contain carcinogenic parts – such as
ning the separation efficiency for welding fume"
nickel compounds or chromates – the exhaust air has to
(Issue: February 2009).
be led to the outside. In exceptional cases, the cleaned air
can be returned if the requirements of the TRGS 560
3
„Technical Rules for Hazardous Substances - Air return when
handling carcinogenic, mutagenic substances and substances toxic to reproduction“ are met. According to this, the
concentration of hazardous substances in the air which is
returned into the working area (returned cleaned air) must
The Technical Rules for Hazardous Substances (Technischen Regeln
für Gefahrstoffe -TRGS) reflect the state of the art, occupational
medicine and work hygiene as well as other established results of
not exceed a tenth of the former TRK (technical guideline
occupational research regarding work with hazardous substances
concentration) value.
including their classification and labelling. They are determined and adjusted by the Committee on Hazardous Substances
Tips for users
(Ausschuss für Gefahrstoffe - AGS) and announced by the German
Federal Ministry of Labour and Social Affairs in the Joint Minis-
In order to fulfill the requirements, the operator has
terial Gazette (Gemeinsames Ministerialblatt) according to the
mobile dust extractors as well as central stationary
Ordinance on Hazardous Substances.
devices at his disposal. The dust extractors certified
by IFA (formerly BGIA) (in accordance with the
international standard DIN EN ISO 15012-1) and the
1
central devices corresponding to TRGS 528 fulfill the
legal bases
2
.
Extract from TRGS 528
Ordinance on Hazardous
Substances
http://ww.w.teka.eu/gefstoffv
2
2
(Welding work)
http://ww.w.teka.eu/trgs528
4.5 Air return: (1) Extracted air may only be returned to the
working area if it has been adequately purified. Ventilation
systems with air return may be used if they are type-approved or if individual measurements are conducted to check
TRGS 528
3
TRGS 560 (Air recirculation)
http://ww.w.teka.eu/trgs560
10
_Box_
Good to
know
Risk assessment
Haz. Substances(TRGS 400)
Good to know
inhalational
exposure?
Occupational exposure limits
Occupational exposure limits serve to protect the emplo-
NO
YES
yees and their health against the dangers of inhalation of
Apply
standardized
method?
substances (TRGS 900). They came into effect in 2005 and
replaced the maximum workplace concentration values
YES
NO
that applied until then.
Identification and assessment of
inhalation exposure
TRGS 400 clearly states that the employer needs to carry
(e.g. similar jobs, calculations,
workplace measurements)
out an assessment of the risks and that the necessary protective measures must be taken before starting the work
with hazardous substances (§ 3.1(2)). The employer always
Documentation
has the overall responsibility (§ 3.1(6)).
TRGS 402 informs about the measures which can be taken
Review/optimization
of protection
measures
NO
by an employer in order to comply with the occupational
YES
exposure limits. The decision tree on the right can be used
Confirm and verify
effectiveness
as a first clue.
NO
Hazardous substance
Aluminium oxide
Barium compounds
Lead compounds
Chromium (III) compounds
Chromium (VI) compounds
Cobalt (compounds)
Ferric oxide
Formaldehyde
Carbon dioxide
Carbon monoxide
Copper
Manganese
Nickel
Nickel compounds
Ozone
Phosgene
Nitrogen dioxide
Nitrogen monoxide
Zinc oxide
Tin compounds
Al2O3
Ba
Pb
Cr
Cr (VI)
Co
Fe2O3
CH2O
CO2
CO
Cu
Mn
Ni
Occupat. exposure limit
(in mg/m³)
3
0,5
0,15
2
0,1
3
0,37
9100
35
0,1
0,5
0,5
NiO u.a.
O3
COCI2
NO2
NO
ZnO
Sn
0,05
0,2
0,41
0,95
0,63
0,1
2
Chemical symbol
Protection
measures
sufficient
Confirmation:
Results?
YES
Health risk
Fibrosis, neuropsychic symptoms
Acute toxicity
Damage to brain, kidneys, nervous system
Skin damage
Carcinogenic
Carcinogenic
Siderosis
Potentially carcinogenic
Damage to nervous and circulatory system
Damage to cardiovascular system
Metal fume fever/gastrointestinal symptoms
Damage to central nervous system/resp. tract
Potentially carcinogenic/skin damage
Carcinogenic
Damage to lung, cyanosis
Damage to lung
Lung-function abnormalities
Impact on vascular and nervous system
Metal fume fever/ skin damage
Toxicity
* The information is taken from GESTIS substances database of the Institute for occupational safety and health (Institut für Arbeitsschutz – IFA) of the German Social Accident Insurance.
We do not assume any liability for the accuracy of the data and for possible typing and transmission errors. In case of doubt, please consult the GESTIS database and/or a member of the IFA.
11
Good to know
Types of filters
and the filtered material with a new filter.
Prefilters and particulate filters are classified into 17 diffe-
Fractional separation efficiency: Separation efficiency of
rent filter classes according to their separation efficiency
a filter concerning the particles of one specific size group
ranging from the coarsest filter G1 to the finest filter U17:
(fraction).
G1, G2, G3, G4: COARSE DUST FILTERS
M5, M6, F7, F8, F9: FINE DUST FILTERS
The table below
E10, E11, E12, H13, H14, U15, U16, U17: PARTICULATE FILTERS
shows a detailed
(DIN EN 779 and EN 1822-1:1998)
overview.
Depending on the norm the initial separation efficiency or
the fractional separation efficiency are used as a performance criterion under standard load.
Initial separation efficiency: Ratio between the passing
Directly relevant norms
Related norms
DIN EN 779
DIN EN 779
EN 1822-1:1998
ZH 1/487
US MIL-STD
DS 3928
DIN EN 60335
Coarse dust filter
with separation
efficiency
A
Final pressure
difference
250 Pa
Fine dust filter
with fraction
separator
A
0,4 μm
Final pressure
difference
450 Pa
EPA, HEPA, ULPA
Initial separation
efficiency
A
DEHS, MPPS
approx. 0,1-0,3 μm
Dust eliminating
Medium transmittance level
D
Quartz dust
90% 0,2 μm
Particulate filter
Initial separation
efficiency
A
DOP 0,3 μm
Particulate filter
Initial separation
efficiency
A
NaCl
DOP 0,3 μm
Particulate filter
Transmittance
level
D
Paraffin oil
61% < 1 μm
G1
A>50%
M5
E>40%
E10
A (integral)>85%
The specified limits
may vary considerably depending on
the materials.
95%
EU10
A > 95 %
L
D < 1%
G2
A>65%
M6
E>60%
E11
A (integral)> 95%
U
D< 5%
99,97%
EU11
A > 99,9%
M
D < 0,1%
G3
A>80%
F7
E>80%
E12
A (integral)> 99,5%
S
D< 1%
99,99%
EU12
A > 99,97%
H
D < 0,005%
G4
A>90%
F8
E>90%
H13
A (integral)> 99,95%
A (local)> 99,75%
G
D < 0,5 %
99,999%
EU13
A > 99,99%
F9
E>95%
H14
A (local)> 99,975%
C
D < 0,1 %
U15
A (local)> 99,9975%
K1, K2
D < 0,05 %, Paraffinöl
90% < 1 EM
EU14
A > 99,999%
U16
A (integral)> 99,99995%
A (local)> 99,99975%
U17
A (integral)> 99,999995%
A (local)> 99,9999%
You can find a selection of
our filters on pages 50 and 89!
12
Good to know
Particle sizes
Particles having a size between 1 mm and 0.1 mm can
As the right choice of filters depends on many other fac-
often be seen with the naked eye. Particles smaller than
tors such as the quantity and composition of pollutants
Coarse (>10 μm)
100 μm ( = 0.1 mm) are only visible by
and the operating conditions, a professional consultation
means of an optical microscope. These
and perhaps an assessment of the situation on site should
particle sizes correspond to the filter
take place. For this matter feel free to contact our team by
classes G3 and G4.
using [email protected].
Particles which are smaller than 1 μm
(= 0.001 mm) do not sink, but keep
on floating permanently. Dust and oil
Our Hotline
mist produced during metal processing
+49 28 63 92 82 0
belong to this category. Filters of the
filter classes M5 thru F9 are intended
Fine (< 10 μm)
to be used for particles between 0.1 μm
and 1 μm.
The employer must determine the hazard class
according to the applied processes and ma-
Smaller particles can only be seen with
terials with the help of the table. The highest
the help of a scanning electrode micro-
Ultra fine (0,1 μm)
PLEASE NOTE:
hazard standard class determined for the three
scope. To filter these particles the finest
listed groups of substances is decisive for the
filters of the classes E10-U17 must be
used. Furthermore, activated carbon filters must be used for
particles of 0.01 μm ( = 0.00001 mm) and smaller.
respective process. (Source: TRGS 528, § 3.2.5.,
Paragraph 1, Issue February 2009)
Electron microscope
Scanning electron microscope
Fumes
Eyes
Optical microscope
Coarse dust
Particulate matter
Weld
We
l in
ing
g fumes
Diagram: Exemplary particle sizes
Soldering fumes
Oil mist
Aerosols
Soot
Paint mist and pigments
Virus
Pollen
Bacteria
Tobacco smoke
Hair
Mist
Cement dust
m
m
m
m
m
13
Settling times
Decisive for the settling time of particles are
in particular their size and weight. Small, light
particles are held in the air by air vortices.
Very small particles are in a permanent state
extracted.
Inhalation may result in significant damage
to the health or even cancer. The chart on the
Constantly floating
of floating and may be inhaled if they are not
right shows the approximate settling times of
< 1μm 1 μm
4-5 Std. 8 min
particles.
5μm
3 min
10 μm
3 min
15μm
3 min
30 μm
1 min
50 μm
1 min
100 μm Size of particles
1 min
Bar chart: Settling times of particles
Hazard classes of welding processes
Hazard classes of the processes
Emission rate³ (mg/s)
Substances impacting the respiratory
tract and the lungs
Toxic or toxic irritant
substances
Carcinogenic substances
Submerged arc welding
<1
low
low
low
Gas welding (autogenous
process)
<1
low
low
-
TIG
<1
low
medium
medium
Laser beam welding
without filler material
1 to 2
medium
high
high
MIG/MAG (low-energy
gas-shielded welding)
1 to 4
low
medium
medium - high
Manual arc welding, MIG
(in general)
2 to 8
high
high
high
MAG (flux-cored wire);
flux-cored welding with
protective gas, Laser
beam welding with filler
material
6 to 25
high
high
high
MAG (cored); cored wire
welding without protective gas
> 25
very high
very high
very high
< 1 to 4
low
medium
medium
Autogenous flame
cutting
> 25
very high
very high
very high
Arc spraying
> 25
very high
very high
very high
Processes
Soldering
Source: Technical Rules for Hazardous Substances/Welding work/ TRGS 528, Issue February 2009
14
Good to know
IFA test certificate
In general, every suction and filter unit used in a field working with chromium and nickel must be reported to the Agency for Occupational Safety (Amt für Arbeitsschutz) and must be approved individually
(§ 10 according to the Ordinance on Hazardous Substances).
With a IFA certificate, the individual approval is omitted!
An expensive, time-consuming individual approval is omitted!
Saving of heating costs due to air recirculation!
The Institute for occupational safety and health of the German Social Accident Insurance (Institut für Arbeitsschutz –
IFA) – former BGIA – is a research and testing institute of the
statutory accident insurance institutes in Germany. It is based in Sankt Augustin near Bonn.
IFA 1005029
Welding fume classes
Class
Separation efficiency
W1
≥ 95 %
for unalloyed and low alloyed steels
e.g. with nickel and chromium content
W2
≥ 98 %
same as W1 and for alloyed steels
e.g. with nickel and chromium content of 30 %
same as W2/W1 and for highly alloyed steels
W3
(highest separation efficiency)
Use
≥ 99 %
Schweißrauchabscheideklasse W3
IFA ttestt
certificate
15
IFA certified products in this brochure
(all the systems are certified for the welding fume category W3)
IFA 1005029
filtoo® Welding fume filter, IFA certified, GS certified
Suitable for: short-term fume and dust extraction.
Test certificate IFA 1005029
GS certified IFA 1102002
►
IFA
1Š0šşşš
Page 22
CAREMASTER-IFA Mechanical filter unit with 1 or 2 suction elements
Suitable for: Fume extraction during welding work with unalloyed steels and precious metals.
Test certificates IFA 1205005, 1205006
►
Page 24
STRONGMASTER-IFA Cartridge filter unit with 1 or 2 suction elements
Suitable for: Long-lasting fume extraction during welding involving unalloyed steels and
precious metals, galvanized material and aluminium involving a strong fume production.
Test certificate IFA 1505021, 1205014
►
Page 28
CARTMASTER-IFA Cartridge filter unit with 1 or 2 suction elements
Suitable for: Long-lasting fume extraction during welding involving unalloyed steels and
precious metals, galvanized material and aluminium involving a strong fume production.
Test certificate IFA 1305060, 1305061
►
IFA 0805006
IFA 0605013
Page 32
CARTMASTER-IFA Stationary cartridge filter unit from 1.5 up to 2.0 kW compatible with 1 or
2 suction elements
Suitable for: Long-lasting fume extraction during welding involving unalloyed and precious
metals, galvanized material and aluminium involving a strong fume production (professional solution).
►
Page 44
FILTERCUBE 2N / 2H-IFA Central filter units
Suitable for: Various suction problems at several working places at the same time for work
involving unalloyed and precious metals, galvanized material and aluminium.
►
Page 60
IFA 0605012
involving unalloyed and precious metals, galvanized material and aluminium.
►
Page 62
IFA 0805022
ZPF 9H-IFA Central suction and filter units
involving unalloyed and precious metals, galvanized material and aluminium. Especially
suitable for larger amounts of air.
►
Page 68
16
Good to know
TEKA as a partner for youth and science
that they are able to continue their commitment even in
times of tight budgets.
As a company which is firmly rooted in the region, we take
our social responsibility very seriously. Supporting young
Since 2013 TEKA is a
talents is of particular interest to us. At TEKA 13 young pro-
member of the initia-
fessionals are currently receiving the knowledge and skills
tive Blue Competence
for a successful career (status July 2013).
which symbolizes
leadership in innovation and technology of the plant and machine construction
in the field of sustainable solutions. Based on verifiable
criteria the label characterizes members, participants and
partners of the initiative as suppliers of solutions which
are environmentally friendly and efficient in terms of
energy and resources as well as in line with market requirements and improvement of the quality of life.
We strive to ensure an environment worth living for
future generations. As a modern technology company
research and development are of great importance to us.
This commitment pays off. In September 2009 TEKA was
Fairness and team spirit are important values to us – even
awarded the „Great Award for small and medium sized
beyond company boundaries. Sports play a key role in
enterprises („Großer Preis des Mittelstandes“) of the Oskar
transmitting these values. For this reason we have been
Patzelt foundation.
supporting the work of the SpVgg Vreden 1921 as a “strong
As our thinking is not restricted to our profession we take
part in ground-breaking projects. TEKA supports projects
of research facilities such as the Fraunhofer Institut, the
Technical University of Chemnitz and the University of Applied Sciences of Düsseldorf with its technical knowledge.
For many years we have been taking care for
sports clubs within our region
partner for the youth“ for many years now. We help other
Besides that, the company supports the Westfälische
Hochschule which offers a “bionics” course to develop
cutting-edge technology using nature as a model.
clubs and charitable organisations in the region as well so
BGHM
Our memberships in various associations
TEKA is a member in numerous industrial associations. The company strives to continually improve the standard of occupational safety in the field of air pollution control and is actively involved in several committees such as the "working group:
dedusting" (department of air pollution control of the VDMA (German Engineering Federation)).
17
helps!
Do you have any suggestions on where TEKA should get involved?
If so, please contact us at [email protected]
The Lions Club called, TEKA was
ready to help. We help street kids
in Malaysia.
TEKA supports INTERPLAST: reconstructive surgery for deprived persons
in developing countries
TEKA is a recognized training company
by the Chamber of Industry and Commerce. Every year we employ a lot of new
trainees.
Every year TEKA takes part in
the runners’ meeting “Lauftreff
Nordvelen”.
The TUS Velen women’s volleyball
team were equipped with new
jerseys.
TEKA supports professorships for the
“bionics“ course of study at the Westfälische Hochschule.
We support the SpVgg Vreden
youth football teams.
2013 Nordic Walking world championships were supported by us as well
In 2009 TEKA was awarded the „Great
Award for small and medium sized enterprises („Großer Preis des Mittelstandes“).
Kick for Japan: Help for a
children’s home in Japan
through the association Kellerkinder e.V.
TEKA supported a benefit concert for
an orphanage in Brazil.
The foundation for helping children
with cancer “Kinderkrebshilfe Horizont“ is very dear to our hearts.
Wiraus!bilden
18
TEKA mobile suction and filter units make it
possible for you to flexibly adapt to changing
conditions. For situations that require dust
and smoke extraction, we offer adequate solutions for metal processing (welding/laser),
electronic industry (soldering), dental and
medical technology and also for the printing
industry (plotting).
The TEKA HANDYCART, for instance, is a compact, space-saving unit used for welding of
small components. In a special version, this
filter unit can be used for torch extraction.
On the other hand, the mobile TEKA cartridge
filter units STRONGMASTER and CARTMASTER
are a high-end solution in the field of mobile
suction and filter units. These professional
systems make it possible to realize longlasting fume extraction during welding work
involving non alloyed and precious metals,
especially with strong smoke production.
1. Mobile and wall-mounted suction and filtering systems
Our Hotline
+49 28 63 92 82 0
20
HANDYCART Cartridge filter unit
Suitable for
Welding fumes and dusts generated at changing workplaces (construction
sites, shipbuilding, welding places for small pieces, automobile garages).
Description
Standard equipment
Mobile portable high-vacuum extraction unit
with manual dedusting or fully automatic
pneumatic dedusting.
►
►
►
The filter cartridge remains in the unit to
prevent dust from reaching the workplace.
The filter cartridge guarantees a separation
efficiency ≥ 99 %.
►
►
►
►
►
The extracted dusts are collected in the dust
tray. They can be disposed of by means of an
inlaid polyethylene bag (optionally available).
►
Automatic speed control
High quality GORE-TEX filter
cartridge
2 suction connections ∅ 50 mm
1 temporary cover for suction connection
Service-friendly maintenance door
Dust collecting tray
Operating hours metres
Optical filter monitoring
5 m mains cable
Available as an option
►
►
►
Outlet silencer
Adaptable activated carbon cell
(use for gases)
Large number of accessories
Device with torch extraction
includes fully automatic
dedusting (Art.-No. 97 904 666)
Technical data
Max. volumetric flow of the fan
Max. pressure
Motor performance
Sound level
Inlet nozzle
Filter equipment
Mode of driving
Dimensions
Weight
320 m³/h
21 000 Pa
1,2 kW
≥ 99%
approx. 62 dB(A)
2 ⊗ ∅ 50 mm
filter cartridge GORE-TEX
brushed or brushless electric turbine
W: 300 mm D: 300 mm H: 679 mm
approx. 28 kg
21
Our Hotline
+49 28 63 92 82 0
300
1
2
679
3
5
6
4
300
Illustration without automatic
dedusting
Handle
Display control for HD version
Motor housing
Cartridge housing
Suction nozzle
Maintenance door
Example for application: version for continuous operation
with suction hose and suction jet
Available versions
PG 1
Type of dedusting
Handycart HD
Standard
For torch extraction
manual
automatic
Height: 670 mm
Height: 797 mm
97 902 555
97 904 555
2 110,00 €
2 590,00 €
97 902 666
97 904 666
2 880,00 €
3 340,00 €
Subject to change. Images are similar to the actual product.
1)
2)
3)
4)
5)
6)
22
filtoo® Mechanical filter unit
with 1 suction element, IFA-certified
Suitable for
Welding fumes, cutting fumes, cutting dust, laser fumes, plasma
fumes, grinding dust, glueing vapors, drilling dust and much more
Description
Standard equipment
The device can be used for numerous fields
of application. The mobile suction and filter
unit filters fume and dust and neutralizes
odors. The suction arm (alternatively with
hose) extracts polluted air exactly where it is
produced. The device filters particles or gases
in a four-level filter process including a gross
filter, a prefilter, an activated carbon filter and
a main filter.
►
The unit meets the security requirements of
units of the welding fume category W3 (high
alloy steels). If you handle the unit correctly,
you can use it for circulating air operation
because it fulfills the requirements of the exceptional rules according to the new German
Hazardous Substances Ordinance (GefStoffV).
IFA 1005029
filtoo
(Art.-No. 97 800 2)
with suction arm
(Art.-No. 97 800 9)
►
►
►
►
►
►
►
►
Gross filter with a large surface
Prefilter
Activated carbon filter
Main filter with separation
efficiency of ≥ 99 %
Electronic filter monitoring
Operating hours metre
5 m mains cable
Suction arm 3 m in hose version with
internal joints
or
Suction hose 3 m with hood and magnetic
base
The filtoo was granted the GS sign. This
device is thereby certified to meet the
requirements of the german equipment and
product safety act (GPSG).
Replacement filters and accessories
IFA
1Š0šşşš
PG 0
97 800 3
Gross filter, set of 10, 490 x 490 x 20 mm
71,00 €
97 800 4
Technical data
Prefilter 484 x 484 x 48 mm
97 800 6
2 500 m³/h
Max. pressure
2 500 Pa
Motor performance
1,1 kW
≥ 99 %
Sound level
approx. 68 dB(A)
Dimensions (W×D×H)
580 × 580 × 900 mm
Weight
72,00 €
approx. 80 kg
Activated carbon filter 484 x 484 x 20 mm
63,00 €
97 800 5
Main filter 520 x 520 x 250 mm
206,00 €
97 801 3
Dust pre-separator STAVO
155,00 €
10 372
Spark arrester screen for hood
38,00 €
23
Our Hotline
+49 28 63 92 82 0
►
Spark arrester screen for extraction hood
Example of application: filtoo with suction arm
580
900
580
Available versions
filtoo® Mechanical filter unit with 1 suction element, IFA-certified
PG 0
Suction arm
hose, internal joints, 3 metres
97 800 2 + 97 800 9
Hose
with hood and magnetic base, 3 metres
97 800 2 + 97 801 2
999,00 €
999,00 €
►
24
CAREMASTER-IFA Mechanical filter unit
with 1 suction element
Suitable for
Fume extraction involving unalloyed steels. This unit is IFA certified for
welding fume class W3.
Description
This mobile welding fume filter is IFA certified
in combination with all TEKA suction arms
(∅ 150 mm). The separation efficiency is ≥ 99 %.
units of the welding fume category W3 (highly
alloyed steels). If you handle the unit correctly,
The unit is fitted with a high-capacity fan
with high negative pressure which guarantees a high volumetric flow even if the filter
is saturated.
Standard equipment
►
►
►
►
A stable construction made of steel plate with
consistent powder coating guarantees a low
maintenance operation even under rough
conditions.
CAREMASTER-IFA
(Art. No. 97 300 101)
►
►
►
►
The gross particles are separated in the prefilter. Afterwards the air is guided through the
particle filter where even finest fumes and
dusts are separated. The tight lifting device
guarantees an absolute impermeability and
therefore the separation efficiency of the
filter unit.
Extensive pre-filter mat
Particle filter with separation
efficiency ≥ 99%
Optical and acoustic filter monitoring
Sealing device
Operating hours meter
Operation control lamp
Suction arm Ø 150 mm or suction
hose 12 m Ø 150 mm
5 m mains cable
►
►
►
►
►
Automatic start/stop system
Lighting kit
On/off switch via suction hood
Aluminium mesh pre-filter
The air is let out on the backside of the unit
through an outlet grill and rises up. Thus, at a
distance of 1 m you cannot perceive a disturbing air flow any more.
Technical data
2 500 m³/h
Max. pressure
2 500 Pa
Motor performance
1,1 kW
≥ 99 %
Sound level
approx. 70 dB(A)
665 × 681 × 995 mm
Weight
approx. 122 kg
25
Our Hotline
+49 28 63 92 82 0
66
5
995
1
68
Available versions
CAREMASTER-IFA Mechanical filter unit with 1 suction element
PG 1
Length
Arm, hose type
Internal joints
External joints
Arm, pipe type
Internal joints
External joints
Hose
2 metres
3 metres
4 metres
97 300 100
97 300 101
97 300 102
2 880,00 €
2 910,00 €
2 930,00 €
97 300 110
97 300 111
97 300 112
3 080,00 €
3 110,00 €
3 245,00 €
97 300 120
97 300 121
97 300 122
2 990,00 €
3 120,00 €
3 255,00 €
97 300 130
97 300 131
97 300 132
3 320,00 €
3 460,00 €
3 610,00 €
12 metres
97 300 140
2 910,00 €
Example of application: CAREMASTER
at a welding bench (page 89)
26
with 2 suction elements
Suitable for
Fume extraction involving unalloyed steels. This unit is IFA certified for
Description
This mobile welding fume filter is IFA certified
in combination with all TEKA suction arms
(∅ 150 mm). The separation efficiency is ≥ 99 %.
The unit meets the security requirements
of units of the welding fume category W3
(highly alloyed steels). If you handle the unit
correctly, you can use it in recirculation mode
This mobile suction and filter unit is suitable
for up to two welding places. The suction
arms can be easily set into all positions.
CAREMASTER-IFA
(Art. No. 97 320 111)
A stable steel plate construction with
consistent powder coating ensures a low
conditions.
The gross particles are separated in the prefilter. Afterwards the air is guided through
the particle filter (separation efficiency
≥ 99 %) where even fine fumes and dusts are
separated. The sealing device guarantees
an absolute impermeability as well as the
separation efficiency of the filter unit.
The air is evacuated on the backside of the
unit through an outlet grill and rises up.
Therefore at a distance of 1 m no disturbing
volumetric flow is perceivable any more.
with a high negative pressure that guarantees a high volumetric flow even if the filter
is saturated.
Technical data
1075
66
5
1
68
3 500 m³/h
Max. pressure
2 500 Pa
Motor performance
2,2 kW
≥ 99%
Sound level
approx. 72 dB(A)
665 × 681 × 1 075 mm
Weight
approx. 130 kg
27
Our Hotline
+49 28 63 92 82 0
Standard equipment
►
►
►
►
►
►
►
►
efficiency ≥ 99 %
Sealing device
Operation control lamp
2 suction arms ∅ 150 mm
5 m mains plug
►
►
►
►
►
Lighting kit
Available versions
CAREMASTER-IFA Mechanical filter unit with 2 suction elements
PG 1
Length per arm
Arm, hose type
Internal joints
External joints
Arm, pipe type
Internal joints
External joints
2 metres
3 metres
4 metres
97 320 100
97 320 101
97 320 102
3 460,00 €
3 560,00 €
3 680,00 €
97 320 110
97 320 111
97 320 112
3 830,00 €
3 980,00 €
4 120,00 €
97 320 120
97 320 121
97 320 122
3 830,00 €
4 030,00 €
4 260,00 €
97 320 130
97 320 131
97 320 132
4 260,00 €
4 710,00 €
4 970,00 €
Example of application: CAREMASTER
28
STRONGMASTER-IFA Cartridge filter unit, 1 suction element
Suitable for
Long-lasting fume extraction involving unalloyed steels and precious metals,
galvanized material and aluminium involving a strong fume production.
This unit is IFA certified for welding fume class W3.
Description
Mobile cartridge filter unit, IFA certified in
combination with all TEKA suction arms for
the welding fumes class W3. The separation
efficiency is ≥ 99 %.
As the filter cartridge is dedustable, the unit
only generates minimal follow up costs. The
filter cartridge remains within the unit during
dedusting which makes sure that no dust can
reach the working space.
the welding fume category W3 (highly alloyed
steels). If you handle the unit correctly, you
can use it in recirculation mode because it fulfills the requirements of the exceptional rules
according to the new German Hazardous
Substances Ordinance (GefStoffV).
STRONGMASTER-IFA
(Art. No. 97 030 101)
A stable sheet steel construction with
consistent powder coating ensures a low
conditions.
A baffle plate serves to pre-separate gross
particles. Afterwards, the filter cartridge
separates the remaining dusts and fumes.
The filters are dedusted via a maintenance
door by means of a compressed air pistol on
the clean air side. The particles are collected
in a dust collecting tray and can be disposed
of afterwards.
The air is exhausted on the backside of the
unit through an outlet grill and rises up. Thus,
at a 1 m distance, no disturbing air flow can
be perceived any more.
The unit is fitted with a high-capacity snail
fan with high negative pressure that guarantees a high volumetric flow even if the filter
is saturated.
The filter cartridge (dust category M) is
precoated with a special powder that
increases its lifetime compared to regular
filter cartridge enourmously.
Technical data
STRONGMASTER-IFA Cartrdige filter unit
3 000 m³/h
Max. pressure
2 400 Pa
Motor performance
1,1 kW
≥ 99 %
Sound level
approx. 70 dB(A)
665 × 820 × 1365 mm
Weight
approx. 130 kg
29
Our Hotline
+49 28 63 92 82 0
►
►
►
►
►
►
►
►
Available as an option (without IFA Certificate)
Pre-separator
Long lasting, dedustable filter cartridge
Sealing device
Suction arm ∅ 150 mm or
12 m suction hose ∅ 150 mm
5 m mains cable
PE bag for the dust collecting tray
►
Activated carbon extension kit
82
0
Available as an option (with IFA Certificate)
►
►
►
►
Dedusting set (special air jet and compressed air hose)
Lighting kit
5
66
1365
►
Available versions
STRONGMASTER-IFA Cartridge filter unit, 1 suction element
PG 1
Length
Arm, hose type
Internal joints
External joints
Arm, pipe type
Internal joints
External joints
Hose
2 metres
3 metres
4 metres
97 030 100
97 030 101
97 030 102
3 970,00 €
3 995,00 €
4 030,00 €
97 030 110
97 030 111
97 030 112
4 160,00 €
4 180,00 €
4 340,00 €
97 030 120
97 030 121
97 030 122
4 295,00 €
4 380,00 €
4 670,00 €
97 030 130
97 030 131
97 030 132
4 390,00 €
4 540,00 €
4 690,00 €
12 metres
97 030 140
3 995,00 €
Standard equipment
30
STRONGMASTER-IFA Cartridge filter unit, 2 suction elements
Suitable for
Long-lasting fume extraction involving unalloyed steels and precious
metals, galvanized material and aluminium involving a strong fume
production. This unit is IFA certified for welding fume class W3.
Description
Mobile cartridge filter unit with suction arm
or 12 m suction hose. The suction arms are
easily set into any position. The follow-up
costs are very low since the cartridges are
dedustable.
A baffle plate serves to pre-separate gross
particles. Afterwards, the 2 large dedustable
filter cartridge (category BIA M) separate the
remaining dusts and fumes. The filters are
dedusted via a maintenance door by means of
a compressed air pistol on the clean air side.
IFA 1205014
Gefahrstoffgeprüft
STRONGMASTER-IFA
(Art. No. 97 050 131)
units of the welding fume category W3 (high
alloy steels). If you handle the unit correctly,
The particles are collected in a dust collecting
tray and can be disposed of afterwards.
The air is evacuated on the backside of the
unit through an outlet grill and rises up. Thus,
at a 1 m distance, no disturbing air flow can
be perceived any more.
The unit is fitted with a high-capacity snail
fan with high negative pressure that guarantees a high volumetric flow even if the filter is
saturated. A stable sheet steel construction
with consistent powder coating guarantees a
low maintenance operation even under rough
conditions..
Technical data
STRONGMASTER-IFA Cartridge filter unit
3 500 m³/h
Max. pressure
2 500 Pa
Motor performance
2,2 kW
≥ 99 %
Sound level
approx. 72 dB(A)
665 × 914 × 1 797 mm
Weight
approx. 150 kg
31
Our Hotline
+49 28 63 92 82 0
Standard equipment
►
►
►
►
►
►
►
►
Pre-separator
Long lasting, dedustable filter cartridge
Sealing device
2 suction arms of ∅ 150 mm each
5 m mains cable
99114
4
►
►
►
►
Lighting kit
5
66
1797
1797
►
(without IFA Certificate)
Available versions
STRONGMASTER-IFA Cartridge filter unit with 2 suction elements
PG 1
Length per arm
arm, hose type
Internal joints
3 metres
4 metres
97 050 101
97 050 102
5 370,00 €
5 420,00 €
5 450,00 €
97 050 110
97 050 111
97 050 112
5 560,00 €
5 590,00 €
5 740,00 €
Internal joints
97 050 120
97 050 121
97 050 122
5 710,00 €
5 795,00 €
6 080,00 €
External joints
97 050 130
97 050 131
97 050 132
5 820,00 €
5 920,00 €
6 110,00 €
External joints
arm, pipe type
2 metres
97 050 100
►
32
CARTMASTER-IFA Cartridge filter unit, 1 suction element
Suitable for
Description
Mobile cartridge filter unit with suction arm
or 12 m suction hose.
The specially developed dedusting system
guarantees optimal separation efficiency
during the whole operation. The advantage
of the POWER SPRAY-SYSTEM is not only
its low maintenance construction without
rotating jets (which wear off easily) but also
the low dedusting pressure respectively low
consumption of compressed air. The dedusted
particles are collected in the dust collecting
The control contains a subsequent cleaning
when the fan stands still.
CARTMASTER
(Art. No. 97 000 101)
conditions.
A baffle plate serves as pre-separator for
gross particles. The filter cartridge of the
filter category BIA M separates the remaining
fumes and dusts (separation efficiency
≥ 99 %). The cartridge is coated ex works with
a special filter medium. Thus, the lifetime
increases considerably compared to that of
standard filter cartridges.
The enormous advantage of this unit is its
user-friendly construction with maintenance
doors for all control areas and very low
consequential costs because the cartridge is
dedustable.
Standard equipment
►
►
►
►
INCLUDING
►
POWER
P
OWER
►
SPRAY-SYSTEM
S
PR
RA
AY-SY
YSTEM
►
►
Fully automatic, contamination-related
dedusting via POWER SPRAY-SYSTEM
Pre-separator
Durable filter cartridge
with large filter surface
Control with display
Compressed air container
Sealing device
ffurther
furth
fu
u her information
informa
ma
ation
tio
on page 58
Technical data
CARTMASTER Cartridge filter unit
3 000 m³/h
Max. pressure
3 000 Pa
Motor performance
1,5 kW
≥ 99 %
Sound level
approx. 70 dB(A)
665 × 981 × 1 265 mm
Weight
approx. 160 kg
33
Our Hotline
+49 28 63 92 82 0
►
►
►
Suction arm ∅ 150 mm or
12 m suction hose ∅ 150 mm
5 m mains cable
PE bag for the dust collecting try
►
►
►
►
►
Lighting kit
1
98
1265
66
5
Available versions
CARTMASTER Cartridge filter unit with 1 suction element
PG 1
Length
Arm, hose type
Internal joints
External joints
Arm, pipe type
Internal joints
External joints
Hose
2 metres
3 metres
4 metres
97 000 100
97 000 101
97 000 102
5 680,00 €
5 710,00 €
5 740,00 €
97 000 110
97 000 111
97 000 112
5 880,00 €
5 890,00 €
6 060,00 €
97 000 120
97 000 121
97 000 122
5 920,00 €
6 060,00 €
6 195,00 €
97 000 130
97 000 131
97 000 132
6 120,00 €
6 260,00 €
6 390,00 €
12 metres
97 000 140
5 680,00 €
1
68
34
CARTMASTER-IFA Cartridge filter unit, 2 suction elements
Suitable for
Description
Mobile cartridge filter with 2 suction arms or 2
suction hoses of 12 m each.
during the whole operation. The advantage of
the POWER SPRAY-SYSTEM is not only its low
maintenance construction without rotating
jets (which wear off easily) but also the low dedusting pressure respectively low consumption
of compressed air. The dedusted particles are
collected in the dust collecting tray and can be
disposed of afterwards.
The control contains a subsequent cleaning
CARTMASTER
(Art. No. 97 015 131)
A stable steel plate construction with consistent powder coating guarantees a low maintenance operation even under rough conditions.
gross particles. The filter cartridge of the filter
category BIA M separates the remaining fumes
and dusts (separation efficiency ≥ 99 %). The
cartridge is coated ex works with a special
filter medium. Thus, the lifetime increases
considerably compared to that of standard
filter cartridges.
user-friendly construction with maintenance
doors for all control areas and very low
consequential costs because the cartridge is
dedustable.
Standard equipment
►
►
►
►
►
►
INCLUDING
►
►
POWER
P
OWER
►
SPRAY-SYSTEM
S
PR
RA
AY-SY
YSTEM
ffurther
furth
fu
u her informa
information
mattion
tio
on page 58
Pre-separator
2 long-lasting filter cartridges with large
filter surface
Sealing device
2 suction arms ∅ 150 mm or 2⊗12 m
suction hose ose ∅ 150 mm
Technical data
3 500 m³/h
Max. pressure
3 000 Pa
Motor performance
2,2 kW
≥ 99 %
Sound level
approx. 72 dB(A)
665 × 981 × 1 625 mm
Weight
approx. 190 kg
35
Our Hotline
+49 28 63 92 82 0
►
►
►
2 suction hoods (synthetics)
incl. throttle valve
5 m mains cable
►
►
►
►
►
Lighting kit
Spark arrester screen for suction hood
1
98
1625
66
5
Available versions
PG 1
Length per arm
Arm, hose type
Internal joints
External joints
Arm, pipe type
Internal joints
External joints
Hose
2 metres
3 metres
4 metres
97 015 100
97 015 101
97 015 102
6 680,00 €
6 790,00 €
6 880,00 €
97 015 110
97 015 111
97 015 112
7 050,00 €
7 190,00 €
7 460,00 €
97 015 120
97 015 121
97 015 122
6 790,00 €
7 050,00 €
7 270,00 €
97 015 130
97 015 131
97 015 132
7 290,00 €
7 450,00 €
7 650,00 €
12 metres
97 015 140
6 680,00 €
1
68
36
STRONGMASTER MV Mid vacuum system
Suitable for
Long-lasting fume extraction involving unalloyed steels with a strong fume
m
production, especially suitable for local extraction with a small diameter
(e.g. slit nozzle).
Description
Mobile cartridge filter unit with a large filter
surface (separation efficiency ≥ 99 %). As the
cartridge is dedustable, this unit only generates minimal subsequent costs. The filter
cartridge remains in the unit so that no dusts
can reach the working space.
conditions.
STRONGMASTER MV
(Art. No. 97 030 300)
A baffle plate serves to pre-separate the gross
particles. Afterwards, the filter cartridge
separates the remaining fumes and dusts.
The filters are dedusted via a maintenance
door by means of a compressed air pistol on
the clean air side. The particles are collected
in a dust collecting tray and can be disposed
of afterwards.
The air is exhausted on the backside of the
unit via an outlet grill and rises up. Thus no
disturbing air flow can be perceived any more
at a 1 m distance.
The unit is fitted with a high-capacity turbine
with high negative pressure that guarantees
a high volumetric flow even if the filter is
saturated.
Standard equipment
►
►
►
►
►
►
►
►
Pre-separator
Durable, dedustable filter cartridge
Sealing device
5 m mains cable
Cover for the connection of
3 hoses of ∅ 45 mm each
Technical data
500 m³/h
Max. pressure
10 000 Pa
Motor performance
3,0 kW
≥ 99 %
Sound level
approx. 72 dB(A)
665 × 778 × 1 497 mm
Weight
approx. 135 kg
37
Our Hotline
+49 28 63 92 82 0
►
►
►
66
5
1
68
Available versions
97 030 300
6 450,00 €
PG 3
1497
778
38
CARTMASTER MV Mid vacuum system
Suitable for
Long-lasting fume extraction involving unalloyed steels with a
strong fume production, especially suitable for local extraction
with a small diameter
m
Description
The mobile cartridge filter unit with a
specially developed dedusting system
rotating jets (which wear off easily) but also
the low dedusting pressure respectively low
consumption of compressed air. The dedusted
particles are collected in the dust collecting
The control includes a subsequent cleaning
CARTMASTER MV
(Art. No. 97 000 300)
conditions.
gross particles. The filter cartridge of the filter
category BIA M separates the remaining fumes and dusts (separation efficiency ≥ 99 %).
The cartridge is precoated ex works with
a special filter medium. This considerably
increases its life time compared to usual filter
cartridges.
The unit is fitted with a high-capacity turbine
with a high negative pressure that guarantees a high volumetric flow even if the filter
is saturated.
user-friendy contruction with maintenance
doors for all control areas and the very low
consecutive costs because the cartridge is
dedustable.
INCLUDING
POWER
P
OWER
SPRAY-SYSTEM
S
PR
RA
AY-SY
YSTEM
ffurther
fur
fu
u th
her informa
information
ma
ation
tio
on page 58
Technical data
CARTMASTER MV Mid vacuum system
500 m³/h
Max. pressure
10 000 Pa
Motor performance
3,0 kW
≥ 99 %
Sound level
approx. 72 dB(A)
665 × 981 × 1 497 mm
Weight
approx. 170 kg
39
Our Hotline
+49 28 63 92 82 0
Standard equipment
►
►
►
►
►
►
►
►
►
►
►
Pre-separator
Durable filter cartridge with big filter surface
Sealing device
5 m mains cable
Cover for connection of
3 hoses of ∅ 45 mm each
Example of application: CARTMASTER MV
with suction hose and funnel-shaped nozzle
►
►
66
5
1
68
Available versions
CARTMASTER MV Mid vacuum
97 000 300
8 100,00 €
PG 3
1497
1
98
40
CAREMASTER Stationary mechanical filter unit
with 1 suction element
Suitable for
Fume extraction involving unalloyed steels
Description
Standard equipment
conditions.
►
►
►
►
the particle filter where even finest fumes
and dusts are separated. The sealing device
filter unit.
CAREMASTER
(Art. No. 97 400 101)
►
►
►
►
►
is saturated.
From a length of 5 m on, the suction arm/
crane is equipped with an additional wall
bracket.
efficiency ≥ 99%
Sealing device
External control
Wall mount
5 m mains cable
suction arm ∅ 150 mm with hood
(synthetics) incl. throttle valve
or
suction crane ∅ 160 mm with suction hood
(metal) incl. throttle valve
or
intake ∅ 160 mm
►
►
►
►
►
►
►
Activated carbon filter cartridge
Lighting kit
Exhaust air connection
Technical data
2 500 – 3 500 m³/h
Max. pressure
2 500 Pa
Motor performance
1,1 – 1,5 kW
≥ 99 %
Sound level
approx. 70 dB(A)
665 × 681 × 940 mm
Weight
approx. 122 kg
41
Our Hotline
+49 28 63 92 82 0
Example of application: CAREMASTER wall
mounted with additional nozzle plate attached to
the suction hood
66
5
appro. 2400 mm to floor
930
1
68
CAREMASTER Stationary mechanical filter unit with 1 suction element
PG 1
Length
with 2 500 m³/h, 1,1 kW
Arm, hose type
Internal joints
External joints
Arm, pipe type
Internal joints
External joints
Crane
Connection
2 metres
3 metres
4 metres
97 400 100
97 400 101
97 400 102
97 400 103 97 400 104 97 400 105 97 400 106
2 870,00 €
2 900,00 €
2 930,00 €
3 420,00 €
97 400 110
97 400 111
97 400 112
97 400 113 97 400 114 97 400 115 97 400 116
3 080,00 €
3 100,00 €
3 240,00 €
3 610,00 €
97 400 120
97 400 121
97 400 122
97 400 123 97 400 124 97 400 125 97 400 126
3 130,00 €
3 240,00 €
3 390,00 €
3 650,00 €
97 400 130
97 400 131
97 400 132
97 400 133 97 400 134 97 400 135 97 400 136
3 320,00 €
3 470,00 €
3 610,00 €
∅ 160
∅ 160
with 3 500 m³/h, 1,5 kW
5 metres
3 760,00 €
6 metres
3 690,00 €
3 790,00 €
3 830,00 €
3 970,00 €
97 430 151
97 430 152
97 430 153
3 850,00 €
4 220,00 €
4 800,00 €
97 430 mit 2 500 m³/h, 1,1 kW
2 560,00 €
4 ,5 metres
7 metres
3 830,00 €
3 995,00 €
4 050,00 €
4 240,00 €
8 metres
3 980,00 €
4 250,00 €
4 350,00 €
4 495,00 €
Available versions
42
Suitable for
Fume extraction involving unalloyed steels
Description
Standard equipment
Stationary welding fume filter for up to two
welding places.
►
conditions.
►
►
►
►
►
►
CAREMASTER
(Art. No. 97 420 101)
the particle filter where even finest fumes
and dusts are separated. The sealing device
filter unit.
is saturated.
►
►
►
►
bracket.
efficiency ≥ 99%
Sealing device
External control
Wall mount
5 m mains cable
2 suction arms ∅ 150 mm with hood
(synthetics) incl. throttle valve
or
2 suction cranes ∅ 160 mm with suction
hood (metal) incl. throttle valve
or
2 intakes ∅ 160 mm
►
►
►
►
►
Activated carbon filter cartridge
Lighting kit
Exhaust air connection
Technical data
3 500 m³/h
Max. pressure
2 500 Pa
Motor performance
2,2 kW
≥ 99 %
Sound level
approx. 72 dB(A)
665 × 681 × 930 mm
Weight
approx. 142 kg
43
Our Hotline
+49 28 63 92 82 0
Example of application: CAREMASTER with
two suction elements wall mounted
66
5
approx. 2400 to floor
930
1
68
Available versions
CAREMASTER Stationary mechanical filter unit with 2 suction elements
PG 1
Arm, hose type
Internal joints
External joints
Arm, pipe type
Internal joints
External joints
Cranes
Connections
2 metres
3 metres
4 metres
97 420 100
97 420 101
3 470,00 €
5 metres
6 metres
7 metres
8 metres
97 420 102
97 420 103
97 420 104
97 420 105
97 420 106
3 560,00 €
3 690,00 €
4 420,00 €
4 895,00 €
5 240,00 €
5 530,00 €
97 420 110
97 420 111
97 420 112
97 420 113
97 420 114
97 420 115
97 420 116
3 830,00 €
3 980,00 €
4 130,00 €
4 870,00 €
5 330,00 €
5 690,00 €
6 260,00 €
97 420 120
97 420 121
97 420 122
97 420 123
97 420 124
97 420 125
97 420 126
3 970,00 €
4 220,00 €
4 480,00 €
5 030,00 €
5 510,00 €
5 840,00 €
6 395,00 €
97 420 130
97 420 131
97 420 132
97 420 133
97 420 134
97 420 135
97 420 136
4 290,00 €
4 710,00 €
4 995,00 €
5 540,00 €
6 040,00 €
6 360,00 €
6 920,00 €
∅ 160
2 ⊗ ∅ 160
97 440
3 200,00 €
1 ⊗ ∅ 250
97 443
3 200,00 €
4 ,5 metres
97 440 151
97 440 152
97 440 153
6 530,00 €
7 260,00 €
8 390,00 €
Length per arm
44
CARTMASTER-IFA Stationary cartridge filter unit, 1 suction element
Suitable for
Long-lasting fume extraction for welding involving unalloyed steels and
precious metals, galvanized material and aluminium involving a strong fume
production. The unit is IFA certified for welding fume class W3.
Description
Stationary cartridge filter unit which is IFAcertified in combination with all TEKA suction
arms or cranes according to DIN EN 150012-1.
The dedusted particles are collected in a
freely accessible dust collecting tray and can
be disposed of afterwards.
The separation efficiency is ≥ 99 %.
A baffle plate serves as protection device for
the filter cartridges. The fumes and dusts are
separated from the filter cartridges. They are
coated ex works with a special filter agent.
This increases their lifetime considerably
compared to standard filter cartridges.
The unit corresponds to the security requirements of units of the welding fume category
W3 (high alloy steels). If you handle the unit
correctly, you can use it in a recirculating
mode because it fulfills the requirements of
the exceptional rules according to the new
German Hazardous Substances Ordinance
(GefstoffV).
IFA 0805006
CARTMASTER-IFA
(Art. No. 97 500 101)
conditions.
bracket.
Standard equipment
►
►
►
INCLUDING
POWER
P
OWER
SPRAY-SYSTEM
S
PR
RA
AY-SY
YSTEM
ffurther
fur
fu
u th
her informa
information
ma
ation
tio
on page 58
rotating jets which are susceptible to wear,
but also the low dedusting pressure and low
consumption of compressed air.
►
►
►
►
Automatic filter monitoring
Fully automatic cleaning
via POWER SPRAY-SYSTEM
2 durable filter cartridges
(7,8 m² filter surface each)
Dust collection bin
Wall bracket
Technical data
CARTMASTER-IFA Stationary cartridge filter unit
3 000 m³/h
Max. pressure
3 000 Pa
Motor performance
1,5 kW
≥ 99 %
Sound level
approx. 70 dB(A)
665 × 681 × 2 057 mm
Weight
approx. 130 kg
45
Our Hotline
+49 28 63 92 82 0
►
►
►
►
External control unit with
monitoring elements
Silencer
Connection material (K-nozzle, snap fastener, hose clip)
Suction arm ∅ 150 mm with hood (synthetics) incl. throttle valve
or
Suction crane ∅ 160 mm with hood (metal)
incl. throttle valve
or
Suction nozzle ∅ 160 mm
2057
►
20
►
►
►
Lighting kit
Funkenschutzgitter für Absaughaube
00
(30
00
) (4
2200
►
5
66
66
5
00
0)
Available versions
CARTMASTER-IFA Stationary cartridge filter unit with 1 suction element
PG 1
Length
2 metres
Arm, hose type
Internal joints
External joints
Arm, pipe type
Internal joints
External joints
Crane
∅ 160
Nozzle
∅ 160
3 metres
4 metres
4 ,5 metres
5 metres
6 metres
7 metres
8 metres
97 500 100
97 500 101 97 500 102
97 500 103
97 500 104
97 500 105 97 500 106
5 680,00 €
5 710,00 €
5 740,00 €
6 100,00 €
6 320,00 €
6 460,00 €
97 500 110
97 500 111 97 500 112
97 500 113
97 500 114
97 500 115 97 500 116
5 870,00 €
5 900,00 €
6 395,00 €
6 590,00 €
6 810,00 €
6 060,00 €
6 670,00 €
7 070,00 €
97 500 120
97 500 121 97 500 122
97 500 123
97 500 124
97 500 125 97 500 126
5 920,00 €
6 060,00 €
6 180,00 €
6 380,00 €
6 510,00 €
6 790,00 €
97 500 130
97 500 131 97 500 132
97 500 133
97 500 134
97 500 135 97 500 136
6 120,00 €
6 270,00 €
6 560,00 €
6 760,00 €
7 070,00 €
97 520
5 450,00 €
6 395,00 €
97 500 151
97 500 152
97 500 153
6 670,00 €
7 080,00 €
7 790,00 €
7 100,00 €
7 340,00 €
►
46
CARTMASTER-IFA Stationary cartridge filter unit, 2 suction elements
Suitable for
Long-lasting fume extraction for welding involving unalloyed steels and
precious metals, galvanized material and aluminium involving a strong fume
production. The unit is IFA certified for welding fume class W3.
Description
Stationary cartridge filter unit which is IFAcertified in combination with all TEKA suction
arms or cranes according to DIN EN 150012-1.
Die abgereinigten Partikel werden in einer frei
zugänglichen Staubsammellade gesammelt
und können anschließend entsorgt werden.
The separation efficiency is ≥ 99 %.
A baffle plate serves as protection device for
the filter cartridges. The fumes and dusts are
separated from the filter cartridges. They are
coated ex works with a special filter agent.
This increases their lifetime considerably
compared to standard filter cartridges.
The unit corresponds to the security requirements of units of the welding fume category
W3 (highly alloyed steels). If you handle the
unit correctly, you can use it in a recirculation
mode because it fulfills the requirements of
the exceptional rules according to the new
(GefStoffV).
IFA 0805006
CARTMASTER-IFA
(Art. No. 97 510 101)
conditions.
bracket.
Standard equipment
►
►
►
INCLUDING
POWER
P
OWER
SPRAY-SYSTEM
S
PR
RA
AY-SY
YSTEM
ffurther
fur
fu
u th
her informa
information
ma
ation
tio
on page 58
rotating jets which are susceptible to wear,
but also the low dedusting pressure and low
consumption of compressed air.
►
►
►
►
►
Automatic filter monitoring
Fully automatic cleaning
2 durable filter cartridges
(10 m² filter surface each)
Dust collection bin
Wall bracket
Silencer
Technical data
CARTMASTER-IFA Stationary cartridge filter unit
3 500 m³/h
Max. pressure
3 000 Pa
Motor performance
2,2 kW
≥ 99 %
Sound level
approx. 72 dB(A)
665 × 681 × 2 100 mm
Weight
approx. 165 kg
47
Our Hotline
+49 28 63 92 82 0
Available as an option (no IFA Certificate)
►
►
2 ⊗ connection material (K-nozzle, snap
fastener, hose clip)
2 suction arm ∅ 150 mm with hood (synthetics) incl. throttle valve
or
2 suction cranes ∅ 160 mm with hood
(metal) incl. throttle valve
or
2 suction nozzles ∅ 150 mm or
1 suction nozzle ∅ 250 mm
►
2057
►
5
66
66
5
Available as an option (with IFA Certificate)
►
►
►
20
Lighting kit
Spark arrester screen for
suction hood
00
(30
00
) (4
2200
►
00
0)
CARTMASTER-IFA Stationary cartridge filter unit, 2 suction elements
PG 1
Length per arm
Arm, hose typee Internal joints
External joints
Arm, pipe typee
Internal joints
External joints
Kräne
Stutzen
2 metres
3 metres
5 metres
6 metres
7 metres
97 510 100
97 510 101 97 510 102
97 510 103
97 510 104
97 510 105 97 510 106
6 680,00 €
6 795,00 €
6 890,00 €
7 340,00 €
7 790,00 €
8 060,00 €
97 510 110
97 510 111 97 510 112
97 510 113
97 510 114
97 510 115 97 510 116
7 040,00 €
7 190,00 €
7 470,00 €
7 860,00 €
8 250,00 €
8 650,00 €
97 510 120
97 510 121 97 510 122
97 510 123
97 510 124
97 510 125 97 510 126
6 790,00 €
7 040,00 €
7 280,00 €
7 890,00 €
8 100,00 €
8 710,00 €
97 510 130
97 510 131 97 510 132
97 510 133
97 510 134
97 510 135 97 510 136
7 310,00 €
7 460,00 €
8 280,00 €
8 810,00 €
9 360,00 €
∅ 160
2x ∅ 150
97 530
6 320,00 €
1x ∅ 250
97 532
6 320,00 €
4 metres
4 ,5 metres
7 650,00 €
97 510 151
97 510 152
97 510 153
8 160,00 €
8 870,00 €
10 170,00 €
8 metres
8 640,00 €
9 110,00 €
9 250,00 €
9 890,00 €
Available versions
48
Accessories: STAVO Dust-pre-separator for filtoo
Suitable for
Retrofitting of filtoo to increase filter life; serves as a spark arrester;
easy installation
STAVO
Description
This kit is used for preliminary dust separation
in the filtoo. The inserted baffle directs the
airflow toward the dust collecting drawer.
Possibly suctioned sparks are also captured
effectively.
►
►
►
►
►
Longer filter life and thus very economical
Easy removal of dust particles via dust
collecting drawer
Uncomplicated installation
Can be retrofitted for each filtoo®
Patented
In the collecting drawer most of the dust is
already pre-separated. The following 4 filter
units will be relieved and their lifetime will be
increased. The collection
lection charge can regularly
be emptied in a simple
mple manner.
STAVO
(Art. No. 97 8013)
Easy dust
disposal
2
3
Just open the mainte-
Without the STAVO this
The particles can easily
nance door on the front
dust would have hit the
be disposed of (according
and remove the dust
filter directly and greatly
to their risk classi-
collecting tray.
reduced its lifetime.
fication).
1
Available versions
Accessories: STAVO Dust-pre-separator for filtoo
97 8013
155,00 €
PG 2
49
Accessories: Automatic cleaning
Suitable for
Retrofitting for STRONGMASTER series built before 2011; fully automatic
cleaning of the filter
Description
STRONGMASTER devices from Year 1995 to
2011 can be retrofitted with the Backflush
extension set.
The installation of the automatic cleaning
extension is implemented easily and with
little effort.
The automatic cleaning extension is delivered
with the back cover.
The automatic cleaning extension is
mounted on the back side of the STRONGMASTER
Technical data
Voltage
230 V
Timer
1 to 60 min
Max. Pressure
4 to 6 bar
Available versions
40 0097 030
595,00 €
PG 2
Automatic cleaning
(Art. No. 40 0097 030)
Width 300 mm
Width 600 mm
Suction hose Ø 45 mm
with hard connection
nozzles
Length 2,5 m
Length 5 m
Length 10 m
Ground suction nozzle, width 500 mm
Suction pipe for ground suction nozzle,
length 1 250mm
Connecting sleeve Ø 38 mm
for hose Ø 45 mm
Set: Ground suction nozzle, suction pipe,
connecting sleeve
Filter cartridge PTFE
0,8 m²
(for units since
September 2003)
Conversion kit for new
Filter Art.-No. 10 028 1
(for units up to
August 2003)
Splitter attenuator
with exhaust gills
Filter cartridge PTFE
Carbon brush for turbine
Gross filter, set of 10, 490 x 490 x 20 mm
Prefilter 484 x 484 x 48 mm
Activated Carbon filter 484 x 484 x 48 mm
Main filter 520 x 520 x 250 mm
Filter cartridge 327 x600 mm,
10m², BIA M
Subject to change
CARTMASTER PF-W with 2 suction elements
CARTMASTER PF-W with 1 suction element
CAREMASTER wall mount., 1 suction element
STRONGMASTER with 2 suction elements
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
CARTMASTER with 2 suction elements
■
CARTMASTER with 1 suction element
CARTMASTER MV mid vacuum system
Slit nozzle Ø 45 mm,
with magnetic base
STRONGMASTER MV mid vacuum system
Round nozzle Ø 45 mm,
flexible, with magnetic base
■
CAREMASTER with 2 suction elements
96 317
195,00 €
96 317 1
195,00 €
96 318
134,00 €
93 818 6
179,00 €
96 319 25
62,00 €
96 319 50
119,00 €
96 319 10
229,00 €
12 201
136,00 €
12 202
131,00 €
12 203
26,00 €
12 200 10
285,00 €
10 028 1
133,00 €
10 028 10
40,00 €
97 801 130
239,00 €
98 700 03
205,00 €
98 700 04
39,90 €
97 800 3
71,00 €
97 800 4
72,00 €
97 800 6
63,00 €
97 800 5
206,00 €
97 80 13
156,00 €
10 025
418,00 €
CAREMASTER with 1 suction element
Funnel-shaped nozzle Ø 45 mm,
flexible, with magnetic base
filtoo® mechanical filter unit
Art. No. PG 2
HANDYCART cartridge filter unit
Description
STRONGMASTER-IFA with 1 suction element
Accessories
CAREMASTER wall mount., 2 suction elements
1. Mobile and wall-mounted suction and filtering
filter units
systems
50
■
■
■
■
■
■
■
■
■
■
■
■
■
■
790,00 €
10 029
280,00 €
Particle filter H13 610 x610 x292 mm
10 030
(Separation efficiency ≥ 99%)
345,00 €
Particle filter H13 610⊗610⊗186 mm
10 035 7
(when used with activated charcoal cartridge) 346,00 €
Prefilter mats, set of 10,
10 032
610 x610 x20 mm
107,00 €
Aluminium mesh filter 610⊗610⊗15 mm
10 000 8
140,00 €
96 313 321
236,00 €
Lighting kit
for 1 suction arm
96 323
259,00 €
for 2 suction arms 96 324
490,00 €
Precoat for filter cartridges, 400 g (bucket)
95 100 4
63,00 €
Precoat for filter cartridges, 100 g (bucket)
95 100 500 01
23,00 €
Particle filter 610 x610 x292 mm
(Separation efficiency ≥ 99%)
More filter cartridges on page 89
■
■
■
■
■
■
■
CARTMASTER MV mid vacuum system
■
STRONGMASTER MV mid vacuum system
■
CARTMASTER PF-W with 2 suction elements
■
CAREMASTER wall mount., 2 suction elements
■
CAREMASTER wall mount., 1 suction element
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Spark latch with copper lamellas
97 053
630,00 €
95 014 901 601
■
■
consisting of an additional housing
and activated carbon filter 610x610x100 mm 1050,00 €
(unit is 270 mm higher)
Activated carbon filter within interchangeable housing 610 x610 x100 mm
■
CARTMASTER PF-W with 1 suction element
■
CARTMASTER with 2 suction elements
■
CARTMASTER with 1 suction element
■
STRONGMASTER with 2 suction elements
CAREMASTER with 2 suction elements
Filter cartridge
with PTFE membrane
STRONGMASTER-IFA with 1 suction element
10 009 0
976,00 €
Automatic start-stop
Midi Control
96 313 121
system
for 400 V
462,00 €
Set of 10 dust bags
10 030 250
128,00 €
10 030 251
128,00 €
10 030 252
98,00 €
Dedusting set (consisting of special com10 030 100
pressed air jet and compressed air hose)
204,00 €
Activated carbon filter within interchangea- 97 901 120
ble housing 610x610x100 mm
445,00 €
Extension set for activated carbon filters
97 056
CAREMASTER with 1 suction element
Art. No. PG 2
filtoo® mechanical filter unit
Description
HANDYCART cartridge filter unit
51
52
1. Mobile and wall-mounted
wall-mo
suction and filtering systems
Industry 4.0 describes the linking of industrial production
with the latest information and communication
IN
technology.
This development is the increasing digitalization of
business and society, smartphone, tablet, internet, smart
home. It permanently changes the way how
Germany produces and works in the future.
Smart factories are the future, says Erwin Telöken, CEO
O of
TEKA GmbH. The technical basis for this are intelligent,
t,
digitally networked systems, which help to create a
largely self-organized production. People, machines,
equipment and products communicate with each other.
er.
Sm
Production and logistics processes between companiess
in the same process are intelligently linked together
to make production more efficient, more flexible and
healthier.
If all information is available in real time, a company can
an
be proactive about the availability of certain spare parts,
ts,
ts
missing parts, misconduct, etc.
Through the use of sensors TEKA SmartFilter - AirTracker
ker
- DifCon series and the actuators of EcoCube and
FilterCube series, production processes for networking
g
can be controlled, for example in MicroStep cutting laser
ser
systems across companies, so that resources and energy
gy
can be saved, explains Telöken.
MicroStep
Cutting-/Laser technology
-Actuators-
Intelligent sensors/actuators can help to manage
the errors that occur in all companies and can not
be completely avoided. All in all, the efficiency of
the production can be improved by the intelligent
networking, competitiveness strengthened and
flexibility of the production can be increased
TEKA – Industry 4.0 – The future is NOW.
DifCon
-Sensors-
TEKA
2.53Sensors
Our Hotline
+49 28 63 92 82 0
DUSTRY 4.0
martFilter
SmartFactory
uture is NOW
f
he
AirTracker
4.
-Sensors-
SmartWarehouse
extraction unit
-Actuators-
AirController
-Sensors-
T
-Sensors-
2. Sensors
54
AirTracker Room monitoring system
Suitable for
Monitoring of air quality in the hall or in the workspace and control
the connected extraction and filter systems.
Description
The innovative, smart room monitoring
system of the future.
The European division of the World Health
Organization (WHO) has called on the EU to
install stricter air quality standards.
The innovative, intelligent solution for that is
the TEKA AirTracker room monitoring system.
The newly developed sensor captures
particles smaller than 100 nanometers and
convinces in the evaluation from 0 to 30 mg/
m³ with an accuracy of ± 0.1 mg/ ³, documented and certified.
Building up trust.
High-tech sensors guarantee reliable measured value and safety. Individual adjustment of
threshold values set the course for a secure
future.
Once the threshold value is reached, the
sensor indicates the current status of the particulate concentration by two widely visible,
large-size LED strips with traffic light func-
tion. By the optionally available AirController,
TEKA fans or filter systems can be controlled,
depending on particulate pollution.
Ready-to-Go: Industry 4.0 – TEKA AirTracker.
Businesses can document, manually or by the
data logger (optional), its compliance with
the trade association rules, even in advance
before auditing. Precaution and employee
health always in view - boost confidence.
Dust, whether
coarse or fine – even
up to nanoparticles,
dust categories
PM2.5 for A-dust or
PM10 for E-dust –
the TEKA AirTracker
with its newly developed sensor supervises the respirable dust
in a more than 30 meters wide radius with
an accuracy of +/- 0.1 Micrometer, certified –
Feeling safety.
Technical data
Wireless standard
2.4 GHz IEEE 802.15 conform wireless standard
Processor
CPU i.MX6 with 2 cores up to 1 GHz
Security
128-bit AES Encryption
Interfaces
LAN-/WLAN-Modul/UART/USB
Memory
4 GB Flash/RAM 1 GB/SD-Card slot
Voltage
230/110 V/AC
Casing
Metal
Weight
approx. 12 kg
Measures (W x D x H)
600 mm x 250 mm x 220 mm
Temperature
-10°C to + 60°C
Humidity
10% to 95%
Fine dust
0 mg3/m to 30 mg3/m (Accuracy ± 0,1 mg3/m )
Noise level
40 db to 140 db
55
Our Hotline
+49 28 63 92 82 0
Standard features of TEKA AirTracker include additional
innovative sensors: Air temperature, humidity and noise
levels are also measured.
TEKA
Connect
Networked sensors/actuators are the future in the
"Industry 4.0". TEKA already faces this networked technology nowadays. TEKA sensors/actuators are already an
integral part of the industry.
With suitable smartphone, tablet or PC, the TEKA
AirTracker app can be downloaded. It depicts the current
values of room temperature, humidity, particulate pollution and volume levels.
Various settings in the app complete the user-friendliness and functionality.
The AirTracker room montoring system is for
example mounted on the ceiling at a central location
There are many "dust sensors". Quality and safety, however, provides only the networking of certified sensors,
which document the measured data.
The corresponding app can be installed on any
current iOS system.
Available versions
20170140
799,00 €
TEKA AirTracker. The future is NOW.
2. Sensors
56
AirController WLAN communication solution
Suitable for
Controlling fans, filter systems, ventilation systems, air conditioning, alarm
detection systems and much more.
Description
The TEKA Air Controller is a reliable intelligent
wireless communication solution for the
most varied automation levels according to
the IEEE 802.11 standard.
In conjunction with the AirTracker system the
AirController can perform various actions:
controlling of fans, filter systems, ventilation
can easily control or monitor the AirController
via smartphone, tablet or PC.
The TEKA AirController - in combination, is an
intelligent and complex management system
for the extraction and ventilation systems
of a modern industrial building. Monitor and
control - the intelligent fault management
system.
TEKA Industry 4.0 – the future is NOW.
AirController
TEKA
Connect
systems, air conditioning, alarm signaling
system and much more.
These range from price-sensitive applications to high-performance applications and
specific industry functions in connection of
TEKA series sensors: SmartFilter, DifCon and
AirTracker systems.
The air controller is usable both in the control
cabinet or as a standalone version for external fans or mountable on TEKA suction and
filtration equipment.
Traditional control systems have existed for
years. The modern version in combination
with AirTracker WLAN is however again
significantly more convenient, because you
Available versions
AirController WLAN communication solution
20170150
265,00 €
57
SmartFilter
Suitable for
Parameter monitoring of filter cartridges in FILTERCUBE systems.
Description
Supported by the Federal Ministry of Education
and Research (BMBF) the patented project "Smart
Filter" was realized under the direction of TEKA &
EDC together with their project partners.
Filter systems of FILTERCUBE series - linked in the
manufacturing process.
•
Detecting the degree of contamination and
the temperature in each filter
•
Automatic identification of the filter and the
filter class
•
Improve safety standards and worker
protection
•
Data logging, data and energy transfer via
RFID ISO 15693
•
Fully monolithically integrated system in a
350 nm CMOS technology
Example: Cutting Technology /
Welding
Monitoring parameters, humidity
- temperature - amount of dust filter leaks.
The sensors detect that the system
parameters by operating errors,
defects or other parameters have
changed and arrange the appropriate actions.
SmartFilter
DifCon
Suitable for
Measuring the differential pressure, filter monitoring
Description
DifCon is a newly developed, digital differential
pressure transducer for gaseous media.
Our differential pressure sensor is suitable for
supervising overpressure, vacuum and differential
pressure of gaseous, non-aggressive media. Areas
of application for and in modern building management systems.
The TEKA DifCon sensor unit is also suitable for
filter monitoring. The differential pressure informs
about the degree of contamination of the filter.
Our sensors and devices are designed for a
long-standing, reliably continuous use. They are
very robust and sensitive, designed for measuring
differential pressures of up to 10 kPa.
Typical applications are measurements in mobile
and stationary filters and extraction, air condi-
tioning, ventilation, filtration systems and clean
room technology and industry.
The TEKA DifCon sensor unit is
equipped with an optional GSM
module. Thus, the data obtained
can be logged.
Task of the monitoring process is
to capture the variety of available
energy statistical information and
to make it understandable.
TEKA DifCon is a modern innovative monitoring system database.
DifCon
58
In the field of stationary and central systems we
offer devices for medium and high amounts of emissions fitted with a fully automatic dedusting system.
Additionally, there are high-capacity units in this
field that can be installed to fixed places in production halls and that allow a simultaneous extraction of many different workplaces via ducting and
hoses. Our technicians adapt the different components optimally to the needs of every customer.
TEKA POWER SPRAY-SYSTEM –
Fully automatic dedusting
POWER
P
OWER
SPRAY-SYSTEM
S
PR
RA
AY-SY
YSTEM
Solenoid valve
Inlet
Precoat
Particle
Filter element
Displacer
TEKA implements a fully automated dedusting systems for
almost all units in the following category: the microprocessor-controlled POWER SPRAY-SYSTEM! Instead of the usual
8 bar with jet-/rotating nozzles this system requires barely
4 bar pressure. There are no follow-up costs for worn out
rotating nozzles.
This intelligently developed system dispenses the air within
the filter cartridge optimally.
If the filter has to be changed after extensive use at some
point, the filter cartridge with the displacer is easily removable (common jet-/rotating nozzles have to be disassembled tediously.
The core piece of the POWER SPRAY-SYSTEM is the displacer
within the filter cartridge. This displacer dispenses the incoming air evenly onto the Filter surface.
The cartridge is dedusted gently and effectively.
3. Central suction and filter systems
Our Hotline
+49 28 63 92 82 0
e future is N
Th
FILTE
RCUB
E
IFA 0605012
OW
4.
3. Central suction and filtering systems
60
Suitable for
Various suction problems at several working places at the same time for work
involving unalloyed metals and precious metals, galvanized material and
aluminium. The units are IFA certified for welding fume class W3.
Description
The stationary filter units FILTERCUBE 2N and
2H are certified according to DIN EN ISO 150121 IFA. The separation efficiency is ≥ 99 %.
correctly, you can use it for circulating air
operation because it fulfills the requirements
of the exceptional rules according to the new
(GefStoffV).
The filter cartridges are precoated ex works
with a special filter medium. This increases
their lifetime compared to standard cartridges considerably.
The dedusting is controlled by a microprocessor by means of the display control via the
POWER SPRAY-SYSTEM.
The released fumes and dusts are extracted
via appropriate suction elements and guided
into the filter unit. A baffle plate with large
surface serves as pre-separator and distributes the particles on the whole filter surface.
IFA 0605013
FILTERCUBE 2N
All filter units are fitted with hanging filter
cartridges. Thus, the admission of the cartridges is carried out on the side. Heavy particles fall down directly into the dust container.
INCLUDING
POWER
P
OWER
SPRAY-SYSTEM
S
PR
RA
AY-SY
YSTEM
ffurther
furth
fu
u her informa
information
mattion
tio
on page 58
Technical data
FILTERCUBE 2N / 2H Central filter units
2 500 – 5 000 m³/h
Motor performance
1,5 – 4,0 kW
≥ 99 %
Sound level
approx. 72 dB(A)
665 × 983 × 2 070 – 2 670 mm
Weight
approx. 280 – 350 kg
61
Our Hotline
+49 28 63 92 82 0
Standard equipment
►
►
►
►
►
►
►
►
►
►
Display control unit
2 extensive filter cartridges with 600 mm
each (type 2N)
or with 1 200 mm length (type 2H)
Dust collecting tray with sealing device
Fan within a soundproof housing
Integrated compressed air container
Control unit for the fan
Maintenance doors for all operating areas
Maintenance door in the filter cartridge
housing with inspection window made of
laminated safety glass
Suction nozzle
according to type Ø 160 – 315 mm
►
►
►
►
Continuous precoating device
Particle sensor
Easy-Clean-Plus filter cartridges
(2 x 12,5 m² for version 2N, 2 x 25 m²
for version 2H)
Spark pre-separator
►
66
5
3
98
3
98
66
5
1005
705
Available versions
FILTERCUBE 2N / 2H Central filter units, IFA-Certified
Max. volumetric flow of the fan 2 500 m³/h
3 500 m³/h
PG 3
4 000 m³/h
5 000 m³/h
Max. pressure
2 800 Pa
3 000 Pa
3 000 Pa
3 000 Pa
Motor performance
1,5 kW
2,2 kW
3,0 kW
4,0 kW
FILTERCUBE 2N – 2500
95 014 200 150 153 00
95 014 200 220 203 00
FILTERCUBE 2H – 4000
95 014 210 300 313 00
95 014 210 400 403 00
5 890,00 €
6 160,00 €
6 790,00 €
7 340,00 €
2070
2670
►
62
Suitable for
Various suction problems at several working places at the same time for work
involving unalloyed metals and precious metals, galvanized material and
aluminium. The units are IFA certified for welding fume class W3.
Description
The stationary filter units FILTERCUBE 2N and
2H are certified according to DIN EN ISO 15012-1
IFA. The separation efficiency is ≥ 99 %.
correctly, you can use it for circulating air
operation because it fulfills the requirements
of the exceptional rules according to the new
(GefStoffV).
considerably their lifetime compared to
standard cartridges
POWER SPRAY-SYSTEM.
The released fumes and dusts are extracted
via appropriate suction elements and guided
into the filter unit. A baffle plate with large
surface serves as pre-separator and distributes the particles on the whole filter surface.
IFA 0605012
FILTERCUBE 4H with
soundproof housing
All filter units are fitted with hanging filter
cartridges. Thus, the admission of the cartridges is carried out on the side. Heavy particles fall down directly into the dust container.
INCLUDING
POWER
P
OWER
SPRAY-SYSTEM
S
PR
RA
AY-SY
YSTEM
ffurther
furth
fu
u her informa
information
mattion
tio
on page 58
Technical data
FILTERCUBE 4N / 4H Central filter units
3 500 – 10 000 m³/h
Max. pressure
2 700 – 3 000 Pa
Motor performance
2,2 – 11,0 kW
≥ 99 %
Sound level
approx. 72 dB(A)
800 × 800 × 2 320 – 3 067 mm
63
Our Hotline
+49 28 63 92 82 0
►
►
►
►
►
►
►
►
►
►
Fully automatic dedusting via POWER
SPRAY-SYSTEM
4 extensive filter cartridges with 600 mm
each (type 4N)
or with 1 200 mm length (type 4H)
Dust collecting tray with sealing device
Fan within a soundproof housing
Control unit for the fan
Maintenance doors for all operating areas
Maintenance door in the filter cartridge
Suction nozzle
according to type Ø 250 – 400 mm
►
2390
►
3070
Standard equipment
►
►
►
Continuous precoating device
Particle sensor
Easy-Clean-Plus filter cartridges (4 x 12,5 m²
for version 4N, 4 x 25 m² for version 4H)
Soundproof housing of the fan
Soundproof baffle (only in combination
with soundproof housing)
80
0
80
0
0
80
0
80
FILTERCUBE 4N (left) and
FILTERCUBE 4H (right)
Available versions
FILTERCUBE 4N / 4H Central filter units, IFA certified
PG 3
Max. volumetric flow
of the fan
3 500 m³/h
4 000 m³/h
5 000 m³/h
6 000 m³/h
7 500 m³/h
10 000 m³/h
Max. pressure
2 700 Pa
3 300 Pa
3 600 Pa
4 100 Pa
3 950 Pa
4 600 Pa
Motor performance
2,2 kW
3,0 kW
4,0 kW
5,5 kW
7,5 kW
11,0 kW
Dimensions (B×T×H)
800 × 800 × 2 320 mm
800 × 800 × 2 320 mm
800 × 800 × 2 370 mm
800 × 800 × 2 920 mm
800 × 800 × 2 982 mm
800 × 800 × 3 067 mm
95 014 400 220 311 00
FILTERCUBE 4N – 4000 FILTERCUBE 4N – 5000
95 014 400 300 351 00 95 014 400 400 401 00
95 014 410 550 621 00
95 014 410 750 801 00
95 014 411 101 001 00
8 990,00 €
9 960,00 €
13 160,00 €
13 640,00 €
15 570,00 €
10 640,00 €
►
962
►
1212
64
FILTERCUBE Mid/High vacuum system
Suitable for
Local extraction using hoses and nozzles with a small diameter (e.g. slit
nozzle) – a more flexible solution if it is not possible to install suction
arms due to lack of space
Description
Compact, extremely space-saving central
mid vacuum filter and suction unit for several
places (e.g. changing working places on
shipyards.)
The dedusting is microprocessor-controlled
by the display control and is carried out automatically by the POWER SPRAY-SYSTEM. The
extracted dusts fall into the dust collecting
tray and can be removed without danger by
means of an integrated PE-bag.
considerably their lifetime compared to
standard cartridges
Standard equipment
►
►
►
►
FILTERCUBE 4N HV with
high vacuuum fan and
switch cabinet
INCLUDING
The advantages of the system are the optimal
dedusting performance (high cartridge
lifetime, high suction performance), its userfriendliness and low maintenance.
►
►
►
►
The housing is made of a stable steel plate
construction and fitted with a powder coating inside and outside.
POWER
P
OWER
►
►
SPRAY-SYSTEM
S
PR
RA
AY-SY
YSTEM
►
ffurther
fur
fu
u th
her informa
information
mattio
tion
on page 58
Filter cartridges of the category
BIA M (separation efficiency ≥ 99 %) Display
control unit
POWER SPRAY-SYSTEM
Maintenance doors for all operational areas
Maintenance door for the filter
cartridges housing
Suction nozzle
►
Mobile version with protective frame (only
for version Filtercube 4N)
Flap valves
Particle sensor
Technical data
500 – 3 000 m³/h
Max. pressure
10 000 – 22 000Pa
Motor performance
3,0 – 37,0 kW
≥ 99 %
Sound level
approx. 72 dB(A)
800 × 800 × 2 320 – 2 720 mm
65
Our Hotline
2664
+49 28 63 92 82 0
962
Ducting system, leading to the
adjacent high vacuum fan (not
visible in picture).
80
80
0
0
0
MV system (left) und
HV system (right)
Available versions
PG 3
Mid vacuum system
Max. volumetric
flow of the fan
500 m³/h
1 000 m³/h
2 000 m³/h
Motor performance
Dimensions
3,0 kW
800 × 800 × 2 664 mm
5,5 kW
800 × 800 × 2 720 mm
11,0 kW
800 × 800 × 2 720 mm
3 000 m³/h
FILTERCUBE 4N – 500 MV FILTERCUBE 4N – 1000 MV FILTERCUBE 4N – 2000 MV
95 014 400 300 203 81
95 014 400 550 313 81
95 014 401 100 403 81
10 990,00 €
11 780,00 €
16 820,00 €
18,5 kW
22,0 kW
37,0 kW
FILTERCUBE 4N – 1000 HV
95 014 401 850 404 82
95 014 402 200 404 82
95 014 403 700 404 82
Price on application
High vacuum system
Motor performance
80
80
0
66
ZPF 6H Central suction and filter unit
Suitable for
Various extraction tasks at several working places at the same time.
Especially suitable for large amounts of air.
Description
The central, self-dedusting cartridge filter
system cleans the polluted air that is guided
by an extraction element suitable for practical
application through a specially designed
ducting system. A baffle plate with a large
surface made of copper serves as preseparator
and disperses the particles on the whole filter
surface.
POWER SPRAY-SYSTEM.
Standard equipment
►
►
ZPF 6H with fan next to it
INCLUDING
POWER
P
OWER
SPRAY-SYSTEM
S
PR
RA
AY-SY
YSTEM
ffurther
fur
fu
u th
her information
informa
ma
ation
tio
on page 58
All filter units are equipped with hanging
filter cartridges of the filter category BIA M
(separation efficiency ≥ 99 %). Thus, the
cartridges are admitted on the side. Heavy
particles immediately fall into the dust collecting container.
►
►
►
►
►
►
The filter cartridges are coated ex works with
a special filter medium. This increases their
lifetime compared to standard cartridges.
The advantages of this self-dedusting system
are the optimal dedusting performance (high
lifetime of the cartridges, high extraction
performance), the user-friendliness and the
low maintenance.
►
►
Fully automatic dedusting via POWER
SPRAY-SYSTEM
6 extensive filter cartridges with 25 m²
filter surface each
Dust collecting tray with snap fasteners
Powerful fan incl. control
Maintenance doors for all operational areas
Filter medium (precoat)
►
►
Soundproof housing for the fan
Spark pre-separator
Technical data
ZPF 6H Central suction and filter unit
5 000 – 8 000 m³/h
Max. pressure
2 500 – 3 000 Pa
Motor performance
5,5 – 11,0 kW
≥ 99 %
Filter surface
150 m² (6⊗25 m²)
67
Our Hotline
0
144
Available versions
PG 3
5 000 m³/h
6 000 m³/h
8 000 m³/h
Motor performance
5,5 kW
7,5 kW
11,0 kW
Pressung
2 500 Pa
2 800 Pa
3 000 Pa
Filter surface
150 m² (6⊗25 m²)
150 m² (6⊗25 m²)
150 m² (6⊗25 m²)
ZPF 6H – 5000
94 014 610 551 501 00
ZPF 6H – 6000
94 014 610 751 501 00
ZPF 6H – 8000
94 014 611 101 501 00
23 680,00 €
23 990,00 €
24 760,00 €
144
0
1335
2620
+49 28 63 92 82 0
68
ZPF 9H-IFA Central suction and filter unit
Suitable for
Various extraction tasks at several working places at the same time using
unalloyed metals and precious metals, galvanized material and aluminium. Especially suitable for large amounts of air. This unit is IFA certified
for welding fume class W3.
Description
The filter unit is IFA-certified according to DIN
EN ISO 15012-1. The separation efficiency is
≥ 99 %. The unit corresponds to the security
requirements of units of the welding fume category W3 (highly alloyed steels). The central,
self-dedusting cartridge filter system cleans
the polluted air that is guided by a suction
element suitable for practical application
through a specially designed ducting system.
The combination of display control unit and
POWER SPRAY-SYSTEM guarantees a very
high dedusting performance of the filter
cartridges in order to make ensure an optimal
suction performance during operation
although the dedusting pressure is very low.
The unit is suitable for indoor and outdoor
assembly. Several filter modules can be connected in series. The modular construction
allows extending the unit at any time in order
to achieve larger filter surfaces.
The advantages are the optimal dedusting
performance (high lifetime of the cartridges,
high suction performance), the user-friendliness and the low maintenance.
It is possible to return the filtered air into the
working space which means a considerable
save of heating costs especially in winter.
Alternatively, in summer, the extracted air
can also be guided outside.
by a special filter medium. This procedure
considerably increases the lifetime compared
to standard filter cartridges.
IFA 0805022
Example:
ZPF 9H
Technical Data / Available versions
Motor performance 7,5 kW
11,0 kW
15,0 kW
18,5 kW
Max. Pressure
3 900 Pa
4 600 Pa
4 800 Pa
5 300 Pa
Fan
on top of the unit
94 014 910 751 401 00
placed next to the unit in a soundproof housing
94 014 911 101 801 00
94 014 911 501 804 00
94 014 911 852 254 00
20 980,00 €
22 520,00 €
32 970,00 €
37 750,00 €
Max. volumetric flow
of the fan:
7 500 m³/h
10 000 m³/h
16 000 m³/h
17 200 m³/h
Filter surface:
140,4 m² (9 × 15,6 m²)
180 m² (9 × 20 m²)
180 m² (9 × 20 m²)
225 m² (9 × 25 m²)
Amount of modules:
1
1
1
1
94 014 911 102 251 00
94 014 911 502 254 00
94 014 911 853 604 00
26 860,00 €
37 260,00 €
max. vol. flow of fan:
10 000 m³/h
16 000 m³/h
19 000 m³/h
Filter surface:
225 m² (9 × 25 m²)
225 m² (9 × 25 m²)
360 m² (18 × 20 m²)
Amount of modules:
1
1
2
69
Our Hotline
+49 28 63 92 82 0
INCLUDING
POWER
P
OWER
SPRAY-SYSTEM
S
PR
RA
AY-SY
YSTEM
ffurther
fur
fu
u th
her information
informa
ma
ation
tio
on page 18
Standard equipment
►
►
►
►
►
►
Housing made of stable steel plate with
powder coating from inside and outside
Low wear and maintenance dedusting via
POWER SPRAY-SYSTEM
Precoated filter cartridges of the category
BIA M (separation efficiency ≥ 99 %)
Filter medium (Precoat)
2620
2620
►
►
►
►
Spark pre-separator
Particle sensor
Fire extinguishing systems
Frequency converter
1144440
0
00
114444
PG 3
22,0 kW
30,0 kW
37,0 kW
45,0 kW
55,0 kW
4 300 Pa
5 400 Pa
5 100 Pa
5 600 Pa
5 600 Pa
placed next to the unit in a soundproof housing
94 014 912 202 254 00
94 014 913 003 604 00 94 014 913 703 604 00 94 014 914 504 504 00 94 014 915 506 754 00
20 000 m³/h
28 000 m³/h
32 000 m³/h
35 000 m³/h
42 000 m³/h
225 m² (9 × 25 m²)
360 m² (18 × 20 m²)
360 m² (18 × 20 m²)
450 m² (18 × 25 m²)
675 m²
1
2
2
2
3
94 014 912 203 604 00
94 014 913 004 504 00 94 014 913 704 50 400 94 014 914 505 404 00
23 000 m³/h
28 000 m³/h
32 000 m³/h
39 000 m³/h
360 m² (18 × 20 m²)
450 m² (18 × 25 m²)
450 m² (18 × 25 m²)
540 m² (27 × 20 m²)
2
2
2
3
►
70
DustVac Dust discharge system
Suitable for
Add-On for extraction and filtration systems for increasing the dust
collection capacity to more than 200 liters capacity.
Description
Standard equipment
The DustVac is an optional device extension
for the filter system EcoCube. It serves as
an automatic dust discharge system. In
adjustable time intervals the dust is sucked
from the collecting case of the EcoCube into
the DustVac.
►
►
►
►
►
►
Sealing mat system
Innovative airflow system
Dust collector housing with reduced height
for replacing the existing dust collector
Timer adjusting the feed intervals
Compressed air connection
Powder coated sheet steel construction
The plant has to be supplied with compressed
air during operation. The raw air of the
EcoCube is then passed to the DustVac via
a hose. Another hose leads the cleaned air
back to the filter system. This system allows
a height reduction of the EcoCube by about
430 mm. The dust collection capacity is
increased from about 70 l to 215 l.
DustVac
The DustVac can be both operated in
conjunction with a commercial 215 liter
standard barrel and with an international
drum-barrel. The large sealing mat is pressed
onto the barrel during operation, thus
ensuring a closed system.
Barrels and hoses are not included (see next
page).
Technical data
Max. Flow rate
790 m³/h
Max. Pressure
3.250 Pa
Voltage
100–240 V
Frequency
50/60 Hz
External compressed air
4,5–5 bar
Compressed air consumption
approx. 0,2 m³/h
Air Supply
dry / oil free
Weight
approx. 120 kg
Dimensions
1.100 x 700 x 1.730 mm
71
Our Hotline
+49 28 63 92 82 0
Conventional systems
Big bag solution
Rotary feeder
Large space requirementMany moving parts
High cost of acquisition
Available versions
PG 3
95 014 161 0
2140,00 €
Set | Dust collection barrel with hoses
Accessory for DustVac
The painted steel sheet barrel has a capacity
of 215 l. It has a wall thickness of 0,8 mm, a
diameter of 60 cm and a height of 90 cm.It is
locked with a clamp.
DustVac
Norm-Barrel &
Drum-Barrel
Included in the set are two hoses of 3 m
length and diameters of 38 and 44 mm, which
are required for the operation of the DustVac.
The hoses are characterized by good flexibility and high temperature resistance. They
keep their form at high pressure.
Available versions
Dust collection barrel with hoses for DustVac
201 701 11
270,00 €
PG 3
Description
72
Accessories: Spark latch
Suitable for
Central suction and filter units and suction ductings. Ideal protection
device against fire risk of filter units
Angle top view
Description
Standard equipment
The spark latch consists of a separate housing
with integrated copper plates. The assembly
of the copper plates guarantees a multiple
air scoop. Due to this, sparks bump into the
baffle plates and emit their energy.
►
►
Baffle plates
Maintenance hole
The spark latch can be screwed to the filter
unit. Of course it can also be integrated into
the suction ducting (please also check accessories starting from page 109).
By means of a maintenance hole, the spark
latch can be cleaned if necessary.
Angle frontal view
Detailed view of the copper plates (up to 17 kg of copper content)
View with opened lid
Available versions
Accessories: Spark latch
PG 0
Suction nozzle
∅ 250 mm
∅ 450 mm
Dimensions (WxDxH)
370 x 415 x 370 mm
500 x 541 x 370 mm
95 01 499 250
95 01 499 450
410,00 €
630,00 €
73
Accessories: Spark pre-separator
Our Hotline
+49 28 63 92 82 0
Suitable for
Central suction and filter units. Ideal protection device against fire
risk of filter units.
Description
Metal working produces not only respirable
pollutants, but also sparks and glowing parts
– such as during grinding or cutting.
►
Housing made of stainless steel
Collecting container made of
stainless steel
►
The special diversion of the polluted air inside
the unit guides heavy and especially glowing
parts into the water.
Standard equipment
►
►
►
►
►
►
Level control
Housing made of galvanized steel
Inspection glass for monitoring
the water level
Control and maintenance
door with snap-fasteners
Collecting container
Water connection
Transition piece for ducting
Shut-off valve
Spark pre-separator
B
A
Dimensions
A
B
C
FVS 1 000 - 3 000
560 mm
760 mm
1 430 mm
FVS 4 000 - 5 000
760 mm
960 mm
1 445 mm
FVS 8 000 - 12 000
1 060 mm
1 260 mm
1 433 mm
Available versions
PG 3
max. volumetric flow
up to 3 000 m³/h
up to 5 000 m³/h
up to 12 000 m³/h
FVS 1 000 - 3 000
20 101 020 5
FVS 4 000 - 5 000
20 104 020 5
FVS 8 000 - 12 000
20 108 020 5
3 140,00 €
3 350,00 €
3 980,00 €
►
C
►
74
3. Central suction and filtering
filter units
systems
For filter cartrdiges please check page 22.
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Wet cyclone separator
■
ZPF 9H Central suction and filter unit, IFA
10 030 251
128,00 €
10 030 250
128,00 €
Precoat for filter cartridges, packaging unit 400g
95 100 4
63,00 €
Hopper jet Ø 45 mm, flexible, with magnetic base
96 317
196,00 €
Round nozzle Ø 45 mm, flexible, with magnetic base
96 317 1
196,00 €
Slit nozzle Ø 45 mm,
Width 300 mm
96 318 6
with magnetic base
134,00 €
Width 600 mm
93 81 86
179,00 €
Ground suction nozzle, width 500 mm
12 201
136,00 €
Suction pipe for ground suction nozzle, length 1250 mm 12 202
131,00 €
Connection sleeve Ø 38 mm for hose Ø 45 mm
12 203
26,00 €
Length 2,5 m
Suction hose
96 319 25
Ø 45 mm with hard
62,00 €
connection nozzles
Length 5,0 m
96 319 50
119,00 €
Length 10,0 m
96 319 10
229,00 €
Set of 10 dust bags
ZPF 6H Central suction and filter unit
Art. No.
PG 2
FILTERCUBE 4N / 4H Central filter units, IFA
Bezeichnung
FILTERCUBE 2N / 2H Central filter units, IFA
Accessories
75
ControlUnit filter control
Our Hotline
+49 28 63 92 82 0
Suitable for
Mobile and central suction and filter units
Description
Standard equipment
The filter control ControlUnit monitors all
processes within a suction and filter unit.
► Microprocessor-controlled
► Multilanguage text display
► Operating hours meter
It calculates the specific amount of compressed
air required for the dedusting process. The air
quantity can be regulated and the dedusting
process can either be controlled manually or on
the basis of the differential pressure or time.
The control keys allow for an easy handling of
the software. The control lamp makes a high
operational safety possible.
► Control lamp for operational
and default messages
► Data display
► Pressure display
► External outlet for
monitoring of the unit
Display of the ControlUnit
The control unit is complete and ready for
use for the individual application. The menu
indicates all specific adjustable values. In part,
they can only be adjusted after a passcode has
been entered.
76
Suitable for
Extraction of grinding dust – in special version also suitable to extract
aluminium dust
r
Description
Standard equipment
The advantages of the unit are its simple and
trouble-free operation. Pumps or jets which
could create troubles are not used.
►
►
►
►
The air is cleaned by swirling the dust with
water. The particles in the air flow are enclosed by water and bonded.
The extracted dust particles set down in the
lower water tank and can be discharged by
the ball valve which is installed at the lowest
position of the unit and can be removed
through a maintenance flap.
►
►
►
Stable, high performance fan with silencer
Housing made of galvanized steel
Ball valve for water outlet
Water tanks
Level control
Shut-off valve
Adjustable feet, 420 mm (use optional)
►
Automatic sludger
The fan is suitable for continuous operation
and is placed onto the unit by standard.
The engine of the wet cyclone separator
requires very low maintenance
Technical data
1 500 – 9 000 m³/h
Max. pressure
1 400 – 2 700 Pa
Motor performance
1,5 – 11,0 kW
77
Our Hotline
420
C
D
+49 28 63 92 82 0
A
Dimensions
A
B
C
D
WNA 1 500
1 160 mm
850 mm
2 350 mm
2 660 mm
WNA 2 000
1 360 mm
1 050 mm
2 235 mm
2 575 mm
WNA 3 000
1 360 mm
1 050 mm
2 235 mm
2 625 mm
WNA 3 500
1 360 mm
1 050 mm
2 235 mm
2 635 mm
WNA 5 000
1 560 mm
1 250 mm
2 705 mm
3 220 mm
WNA 7 500
1 760 mm
1 450 mm
2 770 mm
3 310 mm
WNA 9 000
1 760 mm
1 550 mm
2 805 mm
3 320 mm
Available versions
Max. volumetric flow of
PG 3
1 500 m³/h
2 000 m³/h
3 000 m³/h
3 500 m³/h
5 000 m³/h
7 500 m³/h
9 000 m³/h
Motor performance
1,5 kW
2,2 kW
3,0 kW
4,0 kW
5,5 kW
7,5 kW
11,0 kW
Standard
WNA 1 500
20 035 001 5
WNA 2 000
20 035 002 2
WNA 3 000
20 035 003 0
WNA 3 500
20 035 004 0
WNA 5 000
20 035 005 5
WNA 7 500
20 035 007 5
WNA 9 000
20 035 001 502
9 250,00 €
9 940,00 €
9 980,00 €
10 120,00 €
13 690,00 €
14 970,00 €
19 830,00 €
WNA-AL 1 500
20 035 001 577
WNA-AL 2 000
20 035 002 277
WNA-AL 3 000
20 035 003 077
WNA-AL 3 500
20 035 004 077
WNA-AL 5 000
20 035 005 577
WNA-AL 7 500
20 035 007 577
WNA-AL 9 000
20 035 001 502 77
the fan
For aluminium dust
B
78
Our room ventilation and filter systems offer
supporting room air cleaning, especially for work
processes with severe fume formation.
TEKA POWER SPRAY-SYSTEM –
Fully automated dedusting
POWER
P
OWER
SPRAY-SYSTEM
S
PR
RA
AY-SY
YSTEM
Solenoid valve
Inlet
Precoat
Particle
Filter element
Displacer
TEKA implements a fully automated dedusting systems
for all units: the microprocessor-controlled POWER SPRAYSYSTEM! Instead of the usual 8 bar with jet-/rotating nozzles
this system requires barely 4 bar pressure. There are no
follow-up costs for worn out rotating nozzles.
This intelligently developed system dispenses the air within
the filter cartridge optimally.
If the filter has to be changed after extensive use at some
point, the filter cartridge with the displacer is easily removable (common jet-/rotating nozzles have to be disassembled tediously).
The core piece of the POWER SPRAY-SYSTEM is the displacer
within the filter cartridge. It dispenses the incoming air evenly onto the Filter surface.
The cartridge is dedusted gently and effectively.
4. Room ventilation systems
Our Hotline
T
82 0
92 25
35 22
+490028863
08
e
futur is NOW
e
h
4.
AIRTECH
AIRTEC
CH
IFA 0605012
80
AIRTECH P10
Suitable for
Cleaning of polluted ambient air in a production hall.
Description
The TEKA AIRTECH series is a stand alone
system. Fields of use are mainly industrial
and welding companies where a suction
solution right at the source can not be installed or where the AIRTECH unit is used
for additional cleaning of the production
hall.
The polluted air is sucked into the extraction channels attached on either side of
the unit at a height of about 3 m and then
led into the filter section. The particles
are sticking to the surface of the filter
cartridges.
AIRTECH P10
INCLUDING
POWER
P
OWER
SPRAY-SYSTEM
S
PR
RA
AY-SY
YSTEM
The filter cartridges are automatically air
cleaned at preset intervals. The particles
are loosened from the surface of the filter
and fall into the dust collecting container.
The cleaned air is guided back into the
room by individually adjustable jet nozzles
with high reach. That way the polluted
air is also moved into the direction of the
suction canals.
If an error occurs the fan is automatically
shut off. Simultaneously the unit emits an
optical and acoustic warning signal.
The AIRTECH series is certified according
to the DIN EN ISO 15012-1 and approved
by the IFA (Institute for Work Safety of
the German Legal Accident Insurance,
formerly known as BGIA) for the welding
fume class W3 as a welding fume suction
unit with a fixed position. Many types of
dust, welding fume among others, are
inflammable.
The welding company is supposed to take
appropriate measures to prevent those
specific hazards.
Especially it has to make sure that no
ignition sources are sucked into the unit.
If you are dealing with explosive dusts,
please request a separate offer according
to the ATEX directive.
As a safety device the unit is equipped
with a particle sensor on the clean air side.
This way the system is constantly monitored to protect from filter breakthroughs.
ffurther
furth
fu
u her information
informattion
on page 78
Technical data
AIRTECH P10
10 000 m³/h
Motor performance
11,0 kW
≥ 99 %
Dimensions
800 x 1 200 x 3 990 mm
(Width incl. canals 4 500 mm, depth incl. jets 1 455 mm)
81
Our Hotline
+49 28 63 92 82 0
Using these kind of units does not
release the person in charge from
his/her duty to provide appropriate,
personal protective equipment for his/
her co-workers.
44
46
Available versions
AIRTECH P10
95 014 161 0
Price on request
0
120
0
80
3990
2786
When working with stainless steels it
is mandatory to use suction elements.
82
AIRTECH Central suction and filter unit
Suitable for
Cleaning of polluted ambient air in a production hall. This unit is IFA
certified for welding fume class W3.
Description
The filter unit is IFA-certified according to
DIN EN ISO 15012-1. A local extraction often
is not enough to undercut the occupational
exposure limits and thus to exclude any risk
for humans. In this case, it is necessary to
ventilate the room in addition.
The pollutants are extracted at a height of
approx. 3-4 m via extraction grilles and filtered afterwards. At ceiling height, the cleaned
air is returned to the room via nozzles.
The advantages of the AIRTECH room
exhausting system are the optimal extraction performance of the filter unit (high
lifetime of the cartridges, good extraction
performance), the user-friendliness and
the low maintenance. Since ducting is not
necessary, the location of the unit can be
chosen flexibly.
If the air is returned into the working area,
the heating costs can be reduced considerably. However, the regulations of the new
(GefStoffV) have to be met.
The filter units are equipped with filter
cartridges of the category BIA M (separation
efficiency ≥ 99 %) and have an especially
developed dedusting system which consists
of the combination of a display control unit
and the POWER SPRAY-SYSTEM. This combination makes sure of an excellent dedusting
performance of the filter cartridges, so that
an optimal extraction performance is guaranteed at any time of the operation.
PLEASE NOTE:
In order to adapt the unit to carcinogenic
substances, a consultation on-site is
required!
!
AIRTECH P30
IFA 1005016
INCLUDING
POWER
P
OWER
SPRAY-SYSTEM
S
PR
RA
AY-SY
YSTEM
ffurther
fur
fu
u th
her informat
information
tion
on page 78
Technical data
AIRTECH Central suction and filter unit
18 000 – 30 000 m³/h
Motor performance
11,0 – 22,0 kW
≥ 99 %
83
Our Hotline
+49 28 63 92 82 0
A
C
B
C
B
A
A
B
C
Standard equipment
►
►
►
►
►
►
►
►
►
Unit without silencer housing
Unit with silencer housing
Suction ducting
Device to connect ductings
Dimensions
with silencer housing
without silencer
housing
A
B
C
D
Amount of nozzles
AIRTECH P18
1 440 mm
1 440 mm
3 200 mm 6 570 mm
17
AIRTECH P24
1 880 mm
1 600 mm
3 510mm
6 810 mm
20
AIRTECH P30
1 880 mm
1 600 mm
3 510 mm
6 810 mm
24
AIRTECH P18
1 440 mm
1 440 mm
3 200 mm 6 000 mm 17
AIRTECH P24
1 880 mm
1 600 mm
3 510mm
6 240 mm 20
AIRTECH P30
1 880 mm
1 600 mm
3 510 mm
6 240 mm 24
Available versions
AIRTECH Central suction and filter unit for clean room air
18 000 m³/h
24 000 m³/h
30 000 m³/h
Motor performance
11,0 kW
15,0 kW
22,0 kW
Filter surface
324 m² (9 x 36 m²)
324 m² (9⊗36 m²)
432 m² (12⊗36 m²)
AIRTECH P18
94 014 16 18
Price on request
AIRTECH P24
94 014 16 24
Price on request
AIRTECH P30
94 014 16 30
Price on request
►
D
►
D
►
Housing made of stable steel plate (powder
coating inside and outside)
Wear- and maintenance-free, fully automatic dedusting via POWER SPRAY-SYSTEM
Filter housing with air inlet
holes on both sides
Dedusting system with compressed air tank
Fan with soundproof housing
Filter cartridges, category BIA M
Suction channel
Particle sensor
D
►
84
BlowTec Central suction and filter unit
Suitable for
Cleaning of polluted room air in a modular design for perfect adjustment to the architecture of the room. The unit is IFA certified for
Description
Standard equipment
AIRTECH - BlowTec is one of many new
developments from TEKA Absaug- und
Entsorgungstechnologie GmbH. This central
suction and filter unit is the perfect solution
for every kind of work that requires more
than extraction right at the source.
►
►
►
►
►
Example: BlowTec
INCLUDING
The biggest advantage: the efficient use of
energy and reduction of cost. During heating
times the energy costs are considerably
reduced by recirculating the cleaned, warm
air back into the working area. Alternatively
it can also be led outside.
►
The modular setup of the AIRTECH - BlowTec
is perfectly adaptable to the architecture of
the room. The ducting that extracts the air
and guides it to the movable jets can vary
in height and length. Standard dimensions
guarantee fast delivery times and quick
assembly.
►
►
►
►
►
►
►
Housing made of stable steel plate (powder coating inside and outside)
Fan with soundproof housing
Filter cartridges, category BIA M
Particle sensor
Filter unit
Ventilatorteil
Control (filter/motor)
Nozzle head
Silencer
Connection between filter unit fan unit
and nozzle head
►
►
Extraction ducting
Frenquency converter
POWER
P
OWER
SPRAY-SYSTEM
S
PR
RA
AY-SY
YSTEM
ffurther
furth
fu
u her information
informattion
on page 78
Technical data
7 500 – 10 000 m³/h
Motor performance
7,5 – 11,0 kW
≥ 99 %
85
Our Hotline
+49 28 63 92 82 0
28
0
0
23
50
95
0
0
95
Available versions
7 500 m³/h
10 000 m³/h
Motor performance
7,5 kW
11,0 kW
Filter surface
100 m² (4 x 25 m²)
100 m² (4⊗25 m²)
BlowTec P7,5
95 014 410 751 003 58
Price on request
BlowTec P10
95 014 411 101 003 58
Price on request
80
1050
ca. 4350
2310
80
00
86
PushPull Central suction and filter unit
Suitable for
Cleaning of polluted ambient air in a production hall
Description
Standard equipment
A suction at the source often is not enough
to undercut the occupational exposure limits
for working places and thus to exclude any
risk for humans. Therefore it is necessary to
additionally ventilate the room.
►
►
►
►
The pollutants on one side of the hall are
extracted by sufficiently dimensioned
ventilation grilles and filtered afterwards.
On the other side of the hall, the cleaned
air is returned into the room – either via
ventilation grilles or via nozzles.
FILTERCUBE 4H aus System PushPull
►
►
Maintenance doors for all operational
areas
Maintenance door for the filter cartridges
NOTICE:
Die FILTERCUBE is certified from the Institute
of Work Safety (IFA, formerly BGIA) and
approved for the welding fume class W3 as
a stationary welding fume suction device. A
big advantage: the automated filter control
allows for a filter cleaning on demand.
The ducting installation is designed to
project requirements!
!
INCLUDING
POWER
P
OWER
SPRAY-SYSTEM
S
PR
RA
AY-SY
YSTEM
ffurther
furth
fu
u her information
informattion
on page 78
Technical data
7 500 – 10 000 m³/h
Motor performance
7,5 – 11,0 kW
≥ 99 %
87
Our Hotline
+49 28 63 92 82 0
Available versions
7 500 m³/h
10 000 m³/h
Motor performance
7,5 kW
11,0 kW
Filter surface
100 m² (4 x 25 m²)
100 m² (4⊗25 m²)
PushPull System P7,5
95 014 410 750 801 00
PushPull System P10
95 014 411 101 001 00
Example of set up: PushPull system in a production hall
88
PG 2
Precoat for filter cartridges
(400g)
For filter cartridges please check page 89.
PG 2
128,00 €
10 030 254
399,00 €
95 100 4
63,00 €
10 030 251
Art. No.
Set of 10 dust bags
AIRTECH P10
Description
AIRTECH Room ventilation system
Accessories
■
■
■
■
■
■
■
■
89
36 m²
Precoat for filter cartridges,
units of 100g
Precoat for filter cartridges,
units of 400g
4
6
9
4
S4
4
6
9
4
4
S4
S6
9
4
S4
4
S2
4
S4
4
4
S4 S4
4
4
4
4
4
AIRTECH P10
FILTERCUBE 4N HV
4
4
9
9
12
4
S4
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
S = Standard , Numbers = Numbers of cartridges per unit
Easy-Clean-Plus filter cartridges
Subject to change. Images are simimilar to the actual product.
Filter cartridge
4
S2
4
AIRTECH P30
Easy-Clean-Plus 25,3 m²
filter cartridge
4
AIRTECH P24
Filter cartridge, 20 m²
BIA M
4
S4
300 mm
AIRTECH P18
Filter cartridge, 15,6 m²
BIA M
4
ZPF 9H
Easy-Clean-Plus 12,5 m²
filter cartridge
S4
ZPF 6H
BIA M
10 025 050
2
2
310,00 €
600 mm 10 025 078
S2 2 S2
S4
404,00 €
600 mm 10 025
2 S2 2 S2
4
418,00 €
600 mm 10 005 012 5
2
2
2
2
4
632,00 €
1 200 mm 10 025 156
S2 2
548,00 €
1 200 mm 10 025 200
2 S2
590,00 €
1 200 mm 10 005 025 0
2
2
998,00 €
1 715 mm 10 025 360
675,00 €
95 100 500 01
■ ■ ■ ■ ■ ■ ■
24,00 €
95 100 4
■ ■ ■ ■ ■ ■ ■
63,00 €
FILTERCUBE 4N – 2000 MV
7,8 m²
PG 2
Filter cartridge
BIA M
Art. No.
BIA M
Length
Filter
surface
CARTMASTER-PF-W 2 suction elements
Description
CARTMASTER-PF-W 1 suction element
Filter cartridges
90
TEKA offers various oil mist separators that
are appropriate for suction of oil and emulsion mist as well as for oily smokes.
They are characterized in particular by a high
separation efficiency and a compact design.
Further information on
our website
www.teka.eu
Oil mist separators
Our Hotline
+49 28 63 92 82 0
92
TEKA gas cutting tables are set up modularly
and per default available in sizes between 2
and 24 m².
On request larger tables are available as
well. In conjunction with our suction and
filter units they offer protection of health
burdens in thermal cutting processes.
More information about our gas cutting tables - in especially the MasterCut ECO series
that is offered in cooperation with our partner
MicroStep are available
on our website.
Gas cutting tables
Our Hotline
+49 28 63 92 82 0
e future is N
Th
ng te
chno
OW
4.
Cutti
logy
futu
DifCon
SmartFilter
AirController
AirTracker
94
Wir bieten verschiedene Schweißtische
We
offer different
benches,
among
an, unter
anderemwelding
auch einen
speziellen
others
a special
welding bench
for edu-in
Ausbildungs
schweißtisch,
der vielfach
cation
purposes
that is often
in
Lehrbetrieben
verwendet
wirdapplied
und sehr
companies
with a training
programme and
flexibel einsetzbar
ist.
can be used flexibly.
Unsere Schleiftische zeichnen sich durch
Our
benches
are und
characterized
by
einegrinding
Rückwand
erfassung
Unterabsaurear
wall
extraction
and
extraction
from
gung aus und sind seitlich optional mit
below
andausgestattet.
are optionally
fitted
with
lamelLamellen
Durch
den
Verzicht
las.
arekönnen
no metal
side
walls,
it
auf Since
Metallthere
wände
auch
lange
und
is
also possible
toergonomisch
handle long and
bulky
sperrige
Objekte
bearbeitet
objects
werden.in an ergonomic way.
5. Welding
4. Schweißand grinding
und Schleiftische
benches
Our Hotline
+49 28 63 92 82 0
5. Welding- and grinding benches
96
Suction table
Suitable for
Extraction from below of fumes and dusts – e.g. for manual plasma arc cutting
Description
Stable construction for extraction from
below. A baffle plate distributes the pollutants inside the bench and calms the air flow.
►
►
►
Support made of refractory bricks
Special dimensions on request
Suction arm
We would be glad to advise you regarding the
choice of the appropriate filter units or fans.
Standard equipment
►
►
Support made of flat iron
Baffle plate
800
800
Suction table
60
0/
90 600 /
0 / 90
120 0 / 1
0 200
5
63
Technical data / Available versions
Suction table
PG 3
Depth: 635 mm ∙ Height: 800 mm
Width
600 mm
900 mm
1 200 mm
Required volumetric flow
of the fan
Suction nozzle
1 500 m³/h
∅ 160 mm
2 000 m³/h
2 500 m³/h
∅ 200 mm
∅ 250 mm
56 200
990,00 €
56 210
1 150,00 €
56 220
1 360,00 €
97
Welding bench
Our Hotline
+49 28 63 92 82 0
Suitable for
Education and training centres as well as industrial plants
Description
Stable welding bench made of sectional steel.
A simple assembly is ensured.
►
►
Downhand welding device
Standard equipment
►
►
Bar iron grating
Refractory bricks
0/
90
0/
120
0
800
60
Welding bench
Welding bench
PG 3
Depth: 635 mm ∙ Height: 800 mm
Width
600 mm
900 mm
1 200 mm
56 100
315,00 €
56 110
445,00 €
56 120
495,00 €
5
63
5. Welding- and grinding benches
98
Grinding bench
Suitable for
Rear wall extraction and extraction from below for grinding tasks.
Description
Here you find a selection of standard grinding
benches.
►
►
►
The dusts are extracted on the back and
below. 90 % of the extracted particles are
already extracted by the rear wall and can
safely and easily be disposed of by means of
the dust collec ting tray.
►
►
Side panels
Lamella curtains folding type
Partial roof with lighting
Wood support
We gladly advise you regarding the choice of
filter units or fans.
►
►
►
►
Rear wall extraction
Flat iron support or wooden support
Pre-separator
2 temporary covers for nozzles
1650
►
0
100
0
80
850
Grinding bench (Art. No. 56 410)
Standard equipment
100
0/
150
0/
20
00
/25
00
Grinding bench
PG 3
Depth: 1 000 mm ∙ Height: 850 mm
Width
required volumetric flow of
the fan
Suction nozzle
(for rear extraction)
Suction nozzle
(for extraction from below)
Standard
with wood support
1 000 mm
1 800 m³/h
∅ 150 mm
∅ 180 mm
56 400
56 400 88
2 370,00 €
2 550,00 €
1 500 mm
2 600 m³/h
∅ 150 mm
∅ 200 mm
56 410
56 410 88
2 580,00 €
2 780,00 €
2 000 mm
3 400 m³/h
∅ 2 × 150 mm
∅ 224 mm
56 420
56 420 88
3 140,00 €
3 320,00 €
56 430
56 430 88
3 250,00 €
3 480,00 €
2 500 mm
4 200 m³/h
∅ 2 × 150 mm
∅ 250 mm
99
Accessories
Our Hotline
Extractable side panels (2 pieces)
PG 3
Rib suspension, pivoted (2 pieces)
Suction arm ∅ 150 mm
hose type,
internal joints
PG 3
Length 2m
PG 2
Length 3m
PG 2
56 130
■
99,00 €
99 920 004 0
■
295,00 €
99 920 000 5
■
379,00 €
97 601 000 1
475,00 €
97 602 000 1
525,00 €
■
■
Grinding bench (Art. No. 56 400) with foldable vertical blinds
PG 3
Grinding bench
Art. No.
Downhand welding device
Wellding bench
Description
Suction table
+49 28 63 92 82 0
100
TEKA offers a wide range of suction andcollecting elements for various solutions.
Our suction arms range from small diameters, e.g. 50 mm for laboratories, dentistry
or beauty salons up to large diameters for
the extraction of high amounts of welding
fume.
Additionally, the TEKA product portfolio
consists of suction arms, cranes and hoses
made of materials which are optimized for
different applications such as arms made of
aluminium that are chemically resistant or
antistatic.
A hood is installed at the tip of every
suction element to make sure of an efficient extraction. You can choose between
different versions.
Our extraction elements are available for
table, wall or ceiling attachment, or they
are connected directly to the filter unit and
positioned by means of joints or jib cranes.
It would be our pleasure to advise you in
finding the appropriate solution for you.
6. Suction and collecting elements
Our Hotline
+49 28 63 92 82 0
102
Suitable for
Welding fume extraction – The arms can either be connected to individual fans
or to central suction and filter systems
Description
Standard equipment
The suction arms Ø 150 mm are available in
different versions and lengths.
►
►
Due to the spring-support, all arms are
easily positioned and self-supporting in the
adjusted position.
►
►
Suction arm (Art. No. 97 621)
►
►
►
B
B
C
AA
The volumetric flow can be individually regulated via a throttle valve that is integrated in
the suction hood.
Oval suction hood Ø 270 mm made of
synthetics with throttle valve
From a length of 5 m on, additional wall
bracket with C-rail
Stable wall bracket made of powdercoated steel plate
Connection nozzle ∅ 160 mm
Wall bracket with support for ducting
connection
3 joints with spring control and friction
plates
Flexible suction hose (PVC) with welded
steel wire spiral (temperature-resistant up
to +120°C)
D
Dimensions
Hose
Rohr
Special solution 10,5 m long
with wall bracket, hose type, internal joints
(Art.-No.97 603 409)
Art. Nr.
A
B
C
D
R
Internal joints
97 601
1 900 mm
815 mm
1 730 mm 1 242 mm
External joints
97 620
1 800 mm
750 mm
1 640 mm
1 150 mm
2 315 mm
Internal joints
97 605
1 900 mm
815 mm
1 730 mm 1 242 mm
2 410 mm
External joints
97 630
1 700 mm 660 mm
1 450 mm 1 100 mm
2 225 mm
2 410 mm
103
Our Hotline
+49 28 63 92 82 0
►
►
►
►
►
►
►
►
Other arm lengths on request
Suction hood made of metal
Nozzle plate for an even more effective
extraction of fumes and dusts
Lighting kit for suction hood
High-temperature hoses
Spark arrester grill
Spark arrester grill made of aluminium
including metal hood
Wall bracket with counter
nozzles for TEKA fans
Suction arm (Art. No. 97 631 162)
Ø 150
2925 (3425) (3925)
Suction arm hose type with
external joints
2400
2375
385
535 220 200
Wall brackets
1000 (2000) (3000) (4000)
2000 (3000) (4000)
Available versions
Length
2 metres
recommended volumetric flow of the fan: 1 000–2 000 m³/h
for wall assembly
Hose
Internal joints
External joints
Pipe
Internal joints
External joints
for mobile units
Hose
Internal joints
External joints
Pipe
Internal joints
External joints
3 metres
4 metres
5 metres
6 metres
7 metres
8 metres
2 000 m³/h
2 000 m³/h
2 000–2 500 m³/h
2 000–2 500 m³/h
2 500 m³/h
2 500–3 000 m³/h
97 603 4
97 601
97 602
97 603
97 602 2
97 603 2
97 602 4
515,00 €
562,00 €
610,00 €
1 020,00 €
1 253,00 €
1 430,00 €
1 680,00 €
97 620
97 621
97 622
97 621 2
97 622 2
97 621 4
97 622 4
772,00 €
998,00 €
1 115,00 €
1 295,00 €
1 516,00 €
1 810,00 €
2 095,00 €
97 605
97 606
97 607
97 606 2
97 607 2
97 606 4
97 607 4
730,00 €
860,00 €
950,00 €
1 258,00 €
1 380,00 €
1 656,00 €
1 795,00 €
97 630
97 631
97 632
97 631 2
97 631 3
97 631 4
97 632 4
944,00 €
1 092,00 €
1 290,00 €
1 470,00 €
1 690,00 €
1 880,00 €
2 270,00 €
97 601 000 1
97 602 000 1
97 603 000 1
475,00 €
525,00 €
572,00 €
97 620 000 1
97 621 000 1
97 622 000 1
689,00 €
762,00 €
861,00 €
97 605 000 1
97 606 000 1
97 607 000 1
613,00 €
712,00 €
814,00 €
97 630 000 1
97 631 000 1
97 632 000 1
887,00 €
1 085,00 €
1 226,00 €
PG 2
104
Suitable for
Larger amounts of air, e.g. for flux-cored arc welding with high tensions
or gross welding rod
Description
The suction arms ø 200 mm are available in
different versions and lengths.
Due to the spring-support, all arms are easily
positioned and self-supporting in the adjusted position.
Suction arm (Art. No. 97 622)
The volumetric flow can individually be
regulated via the throttle valve integrated in
the suction hood.
►
►
►
►
►
►
Standard equipment
►
►
►
►
►
3 joints with spring support
Flexible suction hose (PVC) with welded
steel wire spiral (temperature-resistant up
to +120°C)
Other lengths on request
Wall mount with counter-pipe
for TEKA fans
Oval suction hood made of metal
(Ø 315 mm) with throttle valve
From a length of 5 m on with an additional
wall bracket
Stable wall bracket made of powder-coated
sheet steel
Connection nozzle
Wall bracket with counter nozzle for TEKA
fans
Available versions
PG 2
Length
2 metres
3 metres
4 metres
5 metres
6 metres
7 metres
8 metres
3 000 m³/h
3 000 m³/h
3 500 m³/h
3 500 m³/h
3 500 m³/h
3 500 m³/h
97 661
97 662
97 663
97 662 2
97 663 2
97 662 4
97 663 4
942,00 €
1 020,00 €
1 100,00 €
1 630,00 €
1 695,00 €
1 980,00 €
2 180,00 €
97 661 000 1
97 662 000 1
97 663 000 1
876,00 €
950,00 €
1 030,00 €
recommended volumetric flow of the fan: 3 000 m³/h
for wall
assembly
Hose
for mobile
units
Hose
Internal joints
Internal joints
105
Suction crane
Our Hotline
+49 28 63 92 82 0
Suitable for
Connection to central units and individual fans
Description
Suction cranes are available indifferent versions and lengths.
►
►
►
High-temperature hoses
Regarding suction cranes Ø 160 mm up to a
reach of 6 meters, it is possible to attach tools
due to the two part supporting construction.
At the first outrigger, you can attach charges
up to a weight of 50 kg (e.g. a mechanical wire
travel). The second outrigger can be charged
with up to 10 kg (e.g. tube package).
The internal construction of the telescopic arm
allows a smooth adjustment at every height.
∅ 150 or ∅ 250
3000 (4500) (6000)
Telescope
NW 160 oder NW 250
Available versions
Suction crane
PG 2
Length
∅ 160
∅ 250
3 metres
4,5 metres
6 Meter
97 640
97 641
97 642
1 920,00 €
2 060,00 €
2 270,00 €
97 649
97 650
97 651
2 730,00 €
2 950,00 €
3 170,00 €
►
extendable from 1540 up to 2940mm
►
extendable from 500-1900 mm
►
(in case of external height of 3100 mm)
►
Pivoted, powder-coated supported construction made of sectional steel
Adjustable brakes for the joints
Connection of the suction pipes to flexible
hoses at the joints
Smoothly telescopable extension with suction hood situated at the front outrigger
Wall bracket incl. pipe elbow and drive
flange
535
385 200200
►
3100
Standard equipment
Suction crane (Art. No. 97 641)
106
Telescopic suction arm
Suitable for
Connection to central units and individual fans. Ideal to extract pollutants produced by fixed welding benches, e.g. in welding booths.
Description
The telescopic suction arms are available
in different versions. Due to the little space
required, they are optimally appropriate to be
applied in training and education centres.
►
The version fitted with external joints guarantees a fume extraction with considerably
lower fan performance. This reduces the
noise level.
►
►
►
►
Suction hood ø 150 mm made of synthetics
with integrated throttle valve
Suction hoods ø 100 mm and ø 200 mm
made of metal with integrated throttle
valve
Wall bracket with support for
ducting connection
Connection nozzle Ø 160 mm
Suction hood
Standard equipment
(Art. No. 97 616)
►
►
°
70
►
►
2400
2400
►
Smoothly vertically adjustable
Pivoted to the front
Rotating by 180°
Extendable from a length
of 1.20 to 2.06 m
Low wear telescopic function
(without counterweight)
►
1200 - 2060
►
►
850
850
►
High temperature hoses
Wall mount with counter-pipe
for TEKA fans
170
0
107
Our Hotline
+49 28 63 92 82 0
Available versions
PG 2
Length: 1.2 – 2.06 m
∅
Hose
Internal joints
External joints
100
150
200
97 616 100
97 616
97 616 200
656,00 €
683,00 €
1 145,00 €
97 626 100
97 626
97 626 200
861,00 €
898,00 €
1 339,00 €
Example of application: Telescopic suction arm in a welding booth
108
Special suction hood
Suitable for
Application above booths and welding robots
Special suction hood with
lamellas at a robotic suction system
Description
The suction hoods operate according to the
principle of the nozzle plate. Due to this, the
necessary air amount is applied much more
effectively.
►
Special versions can be realized at every time.
Our employees would be glad to advise you in
your request, also regarding required curtains
and lamellas.
►
►
►
►
Different dimensions on request
Curtains
Lamellas
Different versions
(e.g. lip suction) on request
Made of galvanised steel plate
p
g
Intake openings
Standard equipment
nt
►
►
►
Stable steel plate
e
Suction nozzles
Eye hooks
Crane lugs for
connection from
the ceiling
Fastening screws
for lamella
Available versions
Suction hood
PG 3
Suction nozzle
∅ 200 mm
Required volumetric flow of the fan
Dimensions (B⊗T)
1 700 m³/h
1 000 ⊗ 1 000 mm
56 610
943,00 €
∅ 250 mm
2 600 m³/h
1 500 ⊗ 1 500 mm
56 611
∅ 2⊗200 mm
3 400 m³/h
2 500 ⊗ 1 500 mm
56 612
1 273,00 €
1 657,00 €
109
Accessories
Our Hotline
PG 2
Nozzle plate, round Ø 400 mm, PVC, black
PG 2
Connection material Ø 160 mm
(nozzle, flange and hose clamp)
Outlet air hose, multilayer aluminium foil, length
for delivery 1,25 m, extendable up to 5,0 m
PG 2
∅ 160 mm
∅ 250 mm
Lighting kit incl. transformer unit
PG 2
PG 2
Support column for arm 2 - 4 m long, with base plate, height 2 500 mm
Spare hose for arm, pipe type, incl. rubber bands
Spare hose for arm, hose type
PG 2
PG 2
PG 2
Length 2,0 m
Length 3,0 m
Length 4,0 m
Suction hood PVC, incl. throttle valve
PG 2
PG 2
PG 2
PG 2
Protective grille (fine-meshed)
for integration in suction hood
PG 2
Suction hood PVC incl. throttle valve and
integrated spark protection grille
PG 2
Suction hood (metal), incl. throttle valve
PG 2
Fan 3 000 m³/h,
1,5 kW incl. fixing plate and snap fastener
PG 2
Fan 3 500 m³/h,
2,2 kW incl. wall bracket and flexible aluminium ducting
PG 2
Fixing plate for connection
incl. snap fastener
PG 2
66 210
48,00 €
66 220
48,00 €
96 301
43,00 €
96 303
145,00 €
96 304
198,00 €
96 312
225,00 €
90 000 000 1
580,00 €
10 004 3
70,00 €
10 192 5
87,00 €
10 192 6
131,00 €
10 192 7
173,00 €
66 200
136,00 €
10 372
38,00 €
66 200 000 3
164,00 €
10 490 1
236,00 €
96 103 41
1 110,00 €
96 104 41
1 920,00 €
96 301 200
99,00 €
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Nozzle plate, angular 300 × 360 mm, PVC, black
Suction crane
Art. No.
Description
+49 28 63 92 82 0
110
TEKA fans are efficiently applicable for
aeration and ventilation of working places
and halls. Polluted air can be extracted by
means of a hose or a pipe fitted with an extraction element at the suction nozzle and
can afterwards be guided outside by means
of the outlet nozzle and the connected
ducting. Optionally, the air can be guided
from outside to inside in order to provide
working places or spaces with fresh air.
Our high-quality fans that are made of
steel plate or silumin casting are stable and
thus suitable for continuous operation.
Additionally, a very calm operation is made
sure by the static and dynamic balance.
The fans are also integrated in our economical, universally applicable exhaust
fans. They are the central part of our filter
devices, in this case in combination with
disposable filters or filter cartridges.
The air is guided via the ducting from the
working places to the unit with almost no
loss. If required, the ducting can easily and
professionally be installed by our technicians.
7. Fans and ducting
Our Hotline
+49 28 63 92 82 0
7. Fans and ducting
7
Fan
Suitable for
Connection to suction arms, in order to evacuate pollutants from the
extraction point
Description
The fans are available in different versions
and performances. Due to the stable construction, they are suitable for continuous
operation.
►
►
►
►
Wall bracket
Protective grating
Silencer box
Connection material
Silumin fan
►
►
►
Up to 3 000 m³/h made of silumin casting
(with snap fastener)
From 3 500 m³/h on made of silumin casting (with vibration absorber)
Static and dynamic balanced impellers
(guarantees a calm operation)
Low maintenance engine
∅ 150
115
►
∅ 172
Standard equipment
∅ 172
Fan made of steel sheet
Dimensions
C
Fan 3 500 m³/h
615 mm
650 mm
550 mm
Fan 4 000 m³/h
615 mm
650 mm
550 mm
Fan 5 000 m³/h
615 mm
650 mm
570 mm
Fan 6 000 m³/h
740 mm
770 mm
720 mm
Fan 7 500 m³/h
740 mm
770 mm
720 mm
Fan 10 000 m³/h
740 mm
770 mm
720 mm
A
438
B
B
A
C
449
Available versions
Fan
PG 2
Volumetric flow of the fan
Voltage
2 000 m³/h
2 500 m³/h
3 000 m³/h
3 500 m³/h
4 000 m³/h
5 000 m³/h
6 000 m³/h
7 500 m³/h
Motor performance
0,75 kW
1,1 kW
1,5 kW
2,2 kW
3,0 kW
4,0 kW
5,5 kW
7,5 kW
11,0 kW
Dimensions in mm
449⊗438⊗410
449⊗438⊗410 449⊗438⊗438
615⊗650⊗550
615⊗650⊗550 615⊗650⊗570 740⊗770⊗720
740⊗770⊗720
740⊗770⊗720
Connection nozzle
∅ 160 mm
∅ 160 mm
∅ 160 mm
∅ 250 mm
∅ 250 mm
∅ 315 mm
∅ 355 mm
∅ 400 mm
∅ 450 mm
Weight
approx. 27 kg
approx. 27 kg
approx. 27 kg
approx. 45 kg
approx. 60 kg
approx. 50 kg
approx. 100 kg
approx. 107 kg
approx. 160 kg
230 V / 50 Hz
96 101 23
96 102 23
96 103 23
400 V / 50 Hz
10 000 m³/h
830,00 €
940,00 €
995,00 €
96 101 4
96 102 4
96 103 4
96 104 4
96 105 4
96 106 4
96 107 4
96 108 4
96 109 4
730,00 €
845,00 €
882,00 €
1 720,00 €
1 775,00 €
1 943,00 €
2 365,00 €
2 895,00 €
3 998,00 €
113
Mobile exhaust fan
Our Hotline
+49 28 63 92 82 0
Suitable for
Evacuation of pollutants from the extraction point, e.g. fresh air supply
for containers, pipes and boxes. Also suitable for the extraction of
emissions
Description
The mobile exhaust fan can be used very flexibly due to its low design and the low weight.
Connected to a suction hose, the exhaust fan
is suitable for the application to workplaces
which are difficult to access (e.g. shipbuilding).
Standard equipment
►
►
►
►
►
Housing and impeller made of resistant aluminium casting (up to 1,5 kW) or steel plate
(from 1,5 kW on)
Powder-coated housing and chassis
Ready to plug in
Protective grating on the suction and pressure side
Motor circuit breaker
5 m mains cable
Example of application: Mobile exhaust fan
681
►
►
►
►
Suction hose with suction
hood and magnetic base
Other voltages on request
Exhaustion hose
630
0
45
Available versions
Mobile exhaust fan
PG 2
Volumetric flow of the fan
Voltage
2 000 m³/h
2 500 m³/h
3 000 m³/h
3 500 m³/h
4 000 m³/h
Motor performance
0,75 kW
1,1 kW
1,5 kW
2,2 kW
3,0 kW
Suction nozzle
∅ 160 mm
∅ 160 mm
∅ 160 mm
∅ 250 mm
∅ 250 mm
97 102 230
97 103 230
230 V / 50 Hz
400 V / 50 Hz
1 350,00 €
1 640,00 €
97 101
97 102
97 103
97 104
97 105
1 150,00 €
1 294,00 €
1 496,00 €
1 880,00 €
2 100,00 €
7
7. Fans and ducting
Silencer box for upright version
PG 2
Automatic start/stop system with field sensor
Maxi-Control
PG 2
Automatic start/stop system with magnetic field sensor
for electropneumatic slide valve or motor shut-off valve
Motor circuit breaker
PG 2
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
230 V
230 V
230 V
400 V
400 V
400 V
400 V
400 V
400 V
400 V
400 V
400 V
■
■
■
■
■
400 V
500 V
500 V
■
■
400 V
500 V
500 V
500 V
400 V
500 V
400 V
230 V
400 V
230 V
230 V
500 V
400 V
■
■
Mobile exhaust fan
■
Fan 10 000 m³/h, 11,0 kW
■
Fan 5 000 m³/h, 4,0 kW
■
Fan 4 000 m³/h, 3,0 kW
■
Fan 3 500 m³/h, 2,2 kW
■
Fan 7 500 m³/h, 7,5 kW
PG 2
96 010
104,00 €
96 015
330,00 €
96 020
412,00 €
41 501
20,00 €
41 502
83,00 €
41 503
119,00 €
41 504
133,00 €
96 010 1
1 690,00 €
96 015 1
1 750,00 €
96 020 1
2 280,00 €
96 025 1
2 210,00 €
96 030 1
3 230,00 €
96 313 122 012 3
629,00 €
96 313 122 014 0
629,00 €
96 313 122 014 1
629,00 €
96 313 122 022 4
629,00 €
96 201 00
89,00 €
96 201 01
89,00 €
96 201 02
89,00 €
96 201 03
89,00 €
96 201 04
107,00 €
Fan 6 000 m³/h, 5,5 kW
Protective grille
PG 2
Fan 3 000 m³/h, 1,5 kW
Wall bracket
Art. No.
Fan 2 500 m³/h, 1,1 kW
Description
Fan 2 000 m³/h, 0,75 kW
Accessories
115
Our Hotline
Suction hose,
glass fibre fabric hose
with steel wire spiral,
length 6 m, incl. suction nozzle
with magnetic base as well as connection
material and reduction
Exhaust air hose, glass fibre fabric hose
with steel wire spiral, length 6 m, incl.
connection material
PG 2
96 200 07
1 200,00 €
96 200 10
1 200,00 €
96 200 20
1 200,00 €
96 201 051
96 301
43,00 €
∅ 100 mm
96 314
PG 2
277,00 €
∅ 150 mm
96 316
305,00 €
∅ 250 mm
96 343
330,00 €
∅ 160 mm
96 310 4
PG 2
240,00 €
∅ 250 mm
96 344
285,00 €
Mobile exhaust fan
■
Fan 10 000 m³/h, 11,0 kW
■
Fan 7 500 m³/h, 7,5 kW
Fan 4 000 m³/h, 3,0 kW
Fan 3 500 m³/h, 2,2 kW
Fan 3 000 m³/h, 1,5 kW
Fan 6 000 m³/h, 5,5 kW
PG 2
■
■
■
■
■
■
■
■
■
■
■
Connection material Ø 160 mm
(nozzle, flange and hose clamp)
400 V
Fan 5 000 m³/h, 4,0 kW
Automatic star-delta connection
50 Hz
Art. No.
Fan 2 500 m³/h, 1,1 kW
Description
Fan 2 000 m³/h, 0,75 kW
+49 28 63 92 82 0
7. Fans and ducting
116
7
Hoses and accessories
PG 3
Hoses and accessories
Field of application
High vacuum
Mid vacuum
High temperature
Mid vacuum
Type
Superflex
Klimaflex
Klimaflex HT
Aluflex
Temperature resistance
0° to +85° C
-30° to +80° C
-85° to +310° C
-50° to +200° C
Length
10 metres
15 metres
6 metres
12 metres
4 metres
5 metres
∅ 35 mm
51 100
51 100 1
51 120
51 120 1
51 140
51 180
170,10 €
253,10 €
65,10 €
123,90 €
186,90 €
1,90 €
51 101
51 101 1
51 121
51 121 1
51 141
51 181
199,50 €
302,40 €
73,50 €
142,80 €
195,30 €
2,10 €
51 102
51 102 1
51 122
51 122 1
51 142
51 162
51 182
225,80 €
333,90 €
79,80 €
155,40 €
209,00 €
34,70 €
2,20 €
51 103
51 103 1
51 123
51 123 1
51 143
51 163
51 183
357,00 €
535,50 €
80,90 €
160,70 €
254,10 €
45,20 €
2,30 €
51 104
51 104 1
51 124
51 124 1
51 144
51 164
51 184
474,60 €
711,90 €
86,10 €
170,10 €
304,50 €
60,90 €
2,50 €
51 105
51 105 1
51 125
51 125 1
51 145
51 165
51 185
572,30 €
855,80 €
105,00 €
209,00 €
383,30 €
76,70 €
3,30 €
51 106
51 106 1
51 126
51 126 1
51 146
51 166
51 186
725,60 €
1 092,00 €
132,30 €
263,00 €
436,80 €
89,30 €
3,80 €
51 127
51 127 1
51 147
51 167
51 187
136,50 €
273,00 €
505,10 €
94,50 €
4,00 €
51 128
51 128 1
51 148
51 168
51 188
142,80 €
288,80 €
541,80 €
107,10 €
4,60 €
51 129
51 129 1
51 149
51 169
51 189
162,80 €
321,30 €
590,10 €
120,80 €
4,70 €
51 130
51 130 1
51 150
51 170
51 190
209,00 €
415,80 €
750,80 €
155,40 €
5,00 €
51 131
51 131 1
51 151
51 171
51 191
246,80 €
491,40 €
813,80 €
186,90 €
13,20 €
51 132
51 132 1
51 172
289,80 €
582,80 €
236,30 €
51 133
51 133 1
51 173
321,30 €
635,30 €
265,70 €
51 134
51 134 1
51 174
375,90 €
750,80 €
368,60 €
51 135
51 135 1
51 175
425,30 €
855,80 €
414,80 €
∅ 45 mm
∅ 50 mm
∅ 75 mm
∅ 100 mm
∅ 125 mm
∅ 150 mm
∅ 160 mm
∅ 180 mm
∅ 200 mm
∅ 250 mm
∅ 300 mm
∅ 355 mm
∅ 400 mm
∅ 450 mm
∅ 500 mm
Hose clip
1 piece
117
Pipes, moulded parts and acc.
Our Hotline
+49 28 63 92 82 0
Rohre, Formteile und Zubehör
Deflection cowl
Outlet nozzle with
protective grille
Shut off valve
airtight
Regulating valve
Flange collar
40 360
40 390
50,30 €
8,80 €
40 301
40 361
40 391
35,40 €
50,30 €
8,80 €
∅ 63 mm
∅ 80 mm
∅ 100 mm
∅ 125 mm
∅ 150 mm
∅ 160 mm
∅ 180 mm
∅ 200 mm
∅ 224 mm
∅ 250 mm
∅ 315 mm
∅ 355 mm
∅ 400 mm
∅ 450 mm
∅ 500 mm
Flange ring
40 242
40 272
40 302
40 332
40 362
40 392
40 422
64,40 €
102,80 €
37,70 €
106,90 €
57,20 €
9,40 €
6,50 €
40 243
40 273
40 303
40 333
40 363
40 393
40 423
69,10 €
102,80 €
37,70 €
118,50 €
59,50 €
9,60 €
9,10 €
40 244
40 274
40 304
40 334
40 364
40 394
40 424
72,50 €
118,80 €
43,40 €
125,40 €
68,30 €
11,30 €
12,10 €
40 245
40 275
40 305
40 335
40 365
40 395
40 425
72,50 €
118,80 €
43,40 €
125,40 €
64,80 €
11,30 €
11,60 €
40 246
40 276
40 306
40 336
40 366
40 396
40 426
91,60 €
149,10 €
48,30 €
136,60 €
72,30 €
13,60 €
13,90 €
40 247
40 277
40 307
40 337
40 367
40 397
40 427
91,60 €
149,10 €
48,30 €
136,60 €
76,70 €
13,60 €
13,40 €
40 248
40 278
40 308
40 338
40 398
40 428
96,90 €
161,20 €
60,3 €
160,70 €
15,40 €
17,50 €
40 249
40 279
40 309
40 339
40 369
40 399
40 429
96,90 €
161,20 €
60,30 €
160,70 €
79,40 €
15,40 €
16,90 €
40 250
40 280
40 310
40 340
40 370
40 400
40 430
146,80 €
177,60 €
78,10 €
198,60 €
103,90 €
20,20 €
43,20 €
40 251
40 281
40 311
40 341
40 371
40 401
40 431
159,20 €
201,30 €
86,40 €
270,60 €
116,20 €
21,80 €
44,10 €
40 252
40 282
40 312
40 342
40 372
40 402
40 432
183,50 €
235,60 €
96,20 €
270,60 €
141,00 €
24,80 €
49,70 €
40 253
40 283
40 313
40 343
40 403
40 433
221,30 €
338,20 €
109,80 €
364,60 €
27,80 €
51,90 €
40 254
40 284
40 314
40 344
40 404
40 434
263,30 €
395,10 €
122,50 €
364,60 €
32,00 €
61,10 €
All moulded parts and connection elements are equipped with a double rubber lip seal.
Roof cowl
PG 3
7. Fans and ducting
7
Pipes, moulded parts and accessories
PG 3
Pipes, moulded parts and accessories
∅ 63 mm
∅ 80 mm
∅ 100 mm
∅ 125 mm
∅ 150 mm
∅ 160 mm
∅ 180 mm
∅ 200 mm
∅ 224 mm
∅ 250 mm
∅ 315 mm
∅ 355 mm
∅ 400 mm
∅ 450 mm
∅ 500 mm
Bow 15°
Bow 30°
Bow 45°
Bow 60°
Bow 90°
Nipple for
pipes
Sleeve for
moulded parts
End cap for
pipes
Endcap for
moulded parts
40 000
40 015
40 030
40 060
40 090
40 120
40 150
40 180
40 210
30,00 €
21,30 €
23,20 €
33,70 €
24,20 €
12,10 €
6,90 €
10,30 €
8,00 €
40 001
40 016
40 031
40 061
40 091
40 121
40 151
40 181
40 211
30,00 €
21,30 €
23,20 €
33,70 €
24,20 €
12,10 €
6,90 €
10,30 €
8,00 €
40 002
40 017
40 032
40 062
40 092
40 122
40 152
40 182
40 212
24,10 €
19,10 €
20,70 €
30,20 €
23,20 €
12,70 €
7,40 €
11,45 €
10,20 €
40 003
40 018
40 033
40 063
40 093
40 123
40 153
40 183
40 213
26,30 €
22,30 €
24,30 €
34,70 €
28,80 €
12,80 €
7,60 €
13,20 €
10,90 €
40 004
40 019
40 034
40 064
40 094
40 124
40 154
40 184
40 214
29,90 €
29,90 €
31,30 €
51,60 €
40,50 €
14,80 €
7,90 €
15,75 €
12,70 €
40 005
40 020
40 035
40 065
40 095
40 125
40 155
40 185
40 215
26,70 €
29,90 €
31,30 €
51,60 €
40,50 €
14,80 €
7,90 €
15,75 €
12,70 €
40 006
40 021
40 036
40 066
40 096
40 126
40 156
40 186
40 216
47,20 €
47,20 €
47,20 €
72,60 €
67,00 €
18,70 €
9,10 €
18,15 €
13,60 €
40 007
40 022
40 037
40 067
40 097
40 127
40 157
40 187
40 217
47,20 €
47,20 €
47,20 €
72,60 €
67,00 €
18,70 €
9,10 €
18,15 €
13,60 €
40 008
40 023
40 038
40 068
40 098
40 128
40 158
40 188
40 218
56,20 €
61,20 €
61,20 €
97,60 €
89,60 €
20,00 €
9,90 €
23,15 €
17,10 €
40 009
40 024
40 039
40 069
40 099
40 129
40 159
40 189
40 219
57,40 €
61,20 €
61,20 €
97,60 €
89,60 €
20,00 €
9,90 €
23,15 €
17,10 €
40 010
40 025
40 040
40 070
40 100
40 130
40 160
40 190
40 220
76,70 €
78,20 €
85,20 €
102,50 €
123,80 €
26,50 €
11,90 €
30,30 €
25,70 €
40 011
40 026
40 041
40 071
40 101
40 131
40 161
40 191
40 221
78,90 €
85,00 €
89,20 €
110,80 €
130,50 €
28,50 €
12,80 €
45,25 €
29,50 €
40 012
40 027
40 042
40 072
40 102
40 132
40 162
40 192
40 222
89,60 €
90,30 €
97,70 €
118,00 €
144,30 €
34,10 €
15,60 €
48,40 €
33,20 €
40 013
40 028
40 043
40 073
40 103
40 133
40 163
40 193
40 223
103,30 €
106,50 €
116,10 €
136,90 €
167,50 €
39,50 €
18,40 €
68,95 €
40,30 €
40 014
40 029
40 044
40 074
40 104
40 134
40 164
40 194
40 224
129,60 €
131,70 €
149,70 €
168,80 €
206,0 €
44,60 €
22,00 €
75,10 €
46,10 €
119
Pipes, silencers and accessories
Our Hotline
+49 28 63 92 82 0
Rohre, Schalldämpfer und Zubehör
PG 3
Type
Pipe
Length
3 metres
6 metres
∅ 63 mm
41 300
41 301
42,50 €
85,10 €
41 302
41 303
41 351
41 411
42,50 €
85,10 €
131,00 €
3,00 €
41 304
41 305
41 352
41 412
51,60 €
103,10 €
131,00 €
3,00 €
41 306
41 307
41 353
41 413
64,70 €
129,30 €
162,00 €
3,70 €
41 308
41 309
41 354
41 414
82,30 €
164,60 €
186,20 €
4,20 €
41 310
41 311
41 355
41 415
82,30 €
164,40 €
186,20 €
4,20 €
41 312
41 313
41 356
41 416
104,00 €
207,90 €
268,20 €
4,40 €
41 314
41 315
41 357
41 417
104,00 €
260,60 €
268,20 €
4,40 €
41 316
41 317
41 358
41 418
130,30 €
260,60 €
362,70 €
9,60 €
41 318
41 319
41 359
41 419
130,30 €
260,60 €
362,70 €
9,60 €
41 320
41 321
41 360
41 420
193,10 €
386,20 €
530,10 €
10,80 €
41 322
41 323
41 361
41 421
214,50 €
429,00 €
732,50 €
12,30 €
41 324
41 325
41 362
41 422
240,10 €
480,40 €
914,50 €
16,70 €
41 326
41 327
41 363
41 423
270,30 €
540,50 €
1067,40 €
16,70 €
41 328
41 329
41 364
41 424
299,90 €
599,80 €
1067,40 €
19,30 €
∅ 100 mm
∅ 125 mm
∅ 150 mm
∅ 160 mm
∅ 180 mm
∅ 200 mm
∅ 224 mm
∅ 250 mm
∅ 315 mm
∅ 355 mm
∅ 400 mm
∅ 450 mm
∅ 500 mm
300 mm
Pipe clip
600 mm
900 mm
1 200 mm
∅ 80 mm
Silencer
7. Fans and ducting
7
T-pieces
d2
d1
d1
PG 3
T-pieces
d2
∅ 63 mm
∅ 80 mm
∅ 100 mm
∅ 125 mm
∅ 150 mm
∅ 160 mm
∅ 180 mm
∅ 200 mm
∅ 224 mm
∅ 250 mm
40 870
40 900
40 930
38,20 €
45,10 €
48,10 €
40 871
40 901
40 931
40 961
38,20 €
38,20 €
49,00 €
50,10 €
40 872
40 902
40 932
39,00 €
39,00 €
40 873
∅ 315 mm
∅ 355 mm
40 962
40 992
41 022
41 052
41 082
41 112
41 142
34,20 €
48,20 €
53,80 €
53,80 €
70,30 €
70,30 €
87,00 €
87,00 €
40 903
40 933
40 963
40 993
41 023
41 053
41 083
41 113
41 143
39,80 €
39,80 €
39,80 €
39,80 €
57,00 €
57,30 €
70,30 €
70,30 €
87,00 €
87,00 €
40 874
40 904
40 934
40 964
40 994
41 024
41 054
41 084
41 114
41 144
52,30 €
42,80 €
43,90 €
43,90 €
59,30 €
64,60 €
80,70 €
80,70 €
88,70 €
88,70 €
40 875
40 905
40 935
40 965
40 995
41 025
41 055
41 085
41 115
41 145
52,30 €
42,80 €
43,90 €
43,90 €
59,30 €
59,30 €
80,70 €
80,70 €
88,70 €
88,70 €
40 876
40 906
40 936
40 966
40 996
41 026
41 056
41 086
41 116
41 146
55,20 €
49,90 €
53,80 €
53,80 €
65,40 €
65,40 €
77,20 €
90,40 €
97,80 €
97,80 €
40 877
40 907
40 937
40 967
40 997
41 027
41 057
41 087
41 117
41 147
41 207
55,20 €
49,90 €
53,80 €
53,80 €
65,40 €
65,80 €
77,20 €
77,20 €
97,80 €
97,80 €
114,50 €
40 908
40 938
40 968
40 998
41 028
41 058
41 088
41 118
41 148
41 208
59,90 €
59,90 €
59,90 €
73,20 €
73,20 €
83,90 €
83,90 €
98,50 €
102,50 €
124,20 € 129,70 €
40 909
40 939
40 969
40 999
41 029
41 059
41 089
41 119
41 149
41 209
59,90 €
59,90 €
59,90 €
73,20 €
86,70 €
83,90 €
83,90 €
98,50 €
98,50 €
124,20 € 129,70 €
40 910
40 940
40 970
41 000
41 030
41 060
41 090
41 120
41 150
41 210
77,10 €
77,10 €
78,50 €
86,70 €
100,70 €
98,00 €
100,10 €
115,60 €
115,60 €
136,80 € 169,20 €
40 941
40 971
41 001
41 031
41 061
41 091
41 121
41 151
41 211
92,30 €
93,60 €
100,70 € 107,00 €
108,60 €
108,60 €
120,60 €
120,60 €
143,20 € 158,20 €
40 942
40 972
41 002
41 062
41 092
41 122
41 152
41 212
101,80 €
104,70 € 107,00 € 124,20 €
112,60 €
115,90 €
129,50 €
129,50 €
155,40 € 180,30 €
40 973
41 063
41 093
41 123
41 153
41 213
130,90 €
134,70 €
148,40 €
148,40 €
177,70 € 185,40 €
41 034
41 064
41 094
41 124
41 154
41 214
143,10 €
149,10 €
153,40 €
157,20 €
161,70 €
192,40 € 204,20 €
d1
∅ 63 mm
∅ 80 mm
∅ 100 mm
∅ 125 mm
∅ 150 mm
∅ 160 mm
∅ 180 mm
∅ 200 mm
∅ 224 mm
∅ 250 mm
∅ 315 mm
∅ 355 mm
∅ 400 mm
∅ 450 mm
41 003
41 032
41 033
122,70 € 124,20 € 127,80 €
∅ 500 mm
41 238
41 239
41 240
41 241
41 242
41 243
41 244
121
Reductions
Our Hotline
+49 28 63 92 82 0
d1
d2
PG 3
Reductions
d2
∅ 63 mm
∅ 80 mm
∅ 100 mm
∅ 125 mm
∅ 150 mm
∅ 160 mm
∅ 180 mm
∅ 200 mm
∅ 224 mm
∅ 250 mm
∅ 315 mm
∅ 355 mm
d
∅ 80 mm
40 481
∅ 100 mm
∅ 125 mm
∅ 150 mm
∅ 160 mm
∅ 180 mm
∅ 200 mm
40 482
40 512
19,60 €
19,60 €
40 483
40 513
40 543
33,10 €
20,20 €
39,80 €
40 484
40 514
40 544
40 574
36,20 €
36,20 €
22,60 €
22,60 €
40 485
40 515
40 545
40 575
40 605
36,20 €
22,60 €
22,60 €
22,60 €
22,60 €
40 516
40 546
40 576
40 606
40 636
42,90 €
29,30 €
29,30 €
29,30 €
29,30 €
40 517
40 547
40 577
40 607
40 637
40 667
42,90 €
29,30 €
29,30 €
29,30 €
29,30 €
29,30 €
40 548
40 578
40 608
40 638
40 668
40 698
50,30 €
38,50 €
38,50 €
38,50 €
36,70 €
38,50 €
40 519
40 549
40 579
40 609
40 639
40 669
40 699
40 729
48,40 €
50,30 €
38,50 €
38,50 €
38,50 €
38,50 €
38,50 €
38,50 €
40 550
40 580
40 610
40 640
40 670
40 700
40 730
40 760
65,60 €
68,10 €
68,20 €
48,80 €
70,20 €
48,80 €
70,20 €
48,80 €
40 611
40 641
40 671
40 701
40 731
40 761
40 821
76,00 €
77,50 €
77,50 €
80,10 €
82,40 €
82,40 €
82,40 €
40 642
40 672
40 702
40 732
40 762
40 822
40 852
87,40 €
89,20 €
89,20 €
89,20 €
89,20 €
89,20 €
89,90 €
40 703
40 733
40 763
40 823
40 853
109,80 €
110,30 €
110,30 €
110,30 € 111,00 €
40 764
40 824
125,00 €
125,00 € 125,00 €
∅ 224 mm
∅ 250 mm
∅ 315 mm
∅ 355 mm
∅ 400 mm
∅ 450 mm
∅ 500 mm
40 854
19,60 €
122
TEKA offers you more than a product!
Requirements, planning, production, delivery and assembly – at all steps you are adviced and supported personally by competent
employees. This also applies to product warranties and individual contract conditions are included.
After purchase, our service and maintenance department is always at your disposal. Fast and straightforward. For optimal warranty, it is also possible to conclude a maintenance contract for your devices. In our online shop, you can order comfortably and
directly individual units and accessories.
Products for occupational protection and personal safety have to function perfectly. TEKA not only relies on legal directives but
tries to achieve even better results. We also accept the legally prescribed maintenance sessions of your units. We document the
compliance with legal regulations by means of an inspection log book and an inspection tag.
In order to present the TEKA product portfolio, we have established a comprehensive communication and information centre in the
nearby town Borken-Weseke. In several show rooms, TEKA offers special seminars and product trainings. At the same time, product
demonstrations take place in the integrated permanent exhibition.
Imprint
Copyright
TEKA Absaug- und Entsorgungstechnologie GmbH
The copyright of images used in this catalogue belongs depending on the
individual image to the TEKA Absaug- und Entsorgungstechnologie GmbH,
Shutterstock and its related rights holders, or in case of club crests and logos
to the respective associations, companies and organizations.
Industriestraße 13, 46342 Velen
Post office box 1137, 46334 Velen
Phone. +49(0)2863 9282 - 0/Fax +49(0)2863 9282 - 72
[email protected]
www.teka.eu
Any reprinting of images is not permitted without permission of the
copyright holder.
8. Service
Our Hotline
+49 28 63 92 82 0
Planning
In order to realize customized projects,
our highly qualified employees are at
your disposal. We have our own employees in all sales areas and we are swiftly
available for you everywhere.
PLANNING
Seminar rooms
Production
PRODUCTION
If you need larger quantities or if you
look for products that you do not find in
this catalogue, please contact us.
We are glad to submit you an individual
quotation.
Delivery
The company’s own vehicles, logistics
companies and courier services enable
worldwide delivery of TEKA products.
TEKAffee
DELIVERY
Assembly
Our qualified employees take care of
the assembly and the turnkey handover
of suction and filter units on request.
ASSEMBLY
Exhibition
Warranty
As standard, we offer you a warranty
period of 12 months on all products
listed in this catalogue.
WARRANTY
Service
Our in-house service department is at
your disposal. By completion of a maintenance contract, the warranty period
can be extended to 36 months.
Training center
MAINTENANCE
After Sales
Even after your purchase, we do not
leave you alone. Our team is glad to
answer your questions. You can contact
us at our international hotline:
AFTER SALES
+49(0)2863-9282-0.
Exhibition
Your TEKA Partner:
TEKA
Absaug- und Entsorgungstechnologie GmbH
Industriestraße 13
46342 Velen
Germany
Tel. + 49 28 63 92 82 - 0
Fax + 49 28 63 92 82 - 72
[email protected]
www.teka.eu

FILTER SYSTEMS

Transcription

Similar documents

Transtar Presentation SPX

fitting instructions for a nissan navara d40 (spain built)

NeoNatalie

Drains, Tubes, Lines 101

StrionAir Design System

Filtration

compact wheel loaders

central vacuum system

100 CL - Kanaflex

8 Series Line Chart_611