FRD Coatings

FRD Coatings
N30
Nickel coating at 30% of
total particle weight.
Recommended for resin and
polyimide bonded wheels,
for optimised tool life with
good particle retention,
reduced grinding forces and
reduced heat generation.
N56
Nickel coating at 56% of
total particle weight.
Recommended for phenolic
resin and polyimide bonds.
Improves the mechanical
retention of FRD particles in
the bond. Improves wheel
life and surface finish.
NS60
Nickel coating at 60% of total
particle weight.
Recommended where highest
mechanical retention in
phenolic resin bonds and
polyimide bonding systems is
required. Maximises
mechanical retention and
heat dissipation at most
aggressive material removal
rates.
C50
Copper coating at 50% of
total of FRD particle weight.
Recommended for dry
grinding applications.
Reduces heat generation.
Improves chemical and
mechanical diamond particle
retention.
09.2013
www.vanmoppes.ch
L.M. Van Moppes & Sons SA P.O.Box 1550 1211 Geneva 26 Switzerland
T.+41 22 342 34 50 F. +41 22 342 34 51 [email protected]
www.idf-superabrasives.com