FRD-X2 - Van Moppes

FRD-X2
FRD-X2 Premium is slightly tougher than FRD-X. It is suitable for a wide spectrum of applications, with an
excellent balance between material removal rate, free-cutting ability and tool life. Due to its latest
generation synthesis and excellent thermal resistance it is particularly suitable for high temperature ceramic
bonds.
polyimide
phenolic
vitrified
hybrid
FRD-X2
FRD-X2
FRD-X2
Coated Products
FRD-X2 N56
FRD-X2 N30
FRD-X2 NS60
FRD-X2 C50
Nickel coating at 56% of
total particle weight.
Recommended for phenolic
resin and polyimide bonds.
Improves the mechanical
retention of FRD particles in
the bond. Improves wheel
life and surface finish.
Nickel coating at 30% of
total particle weight.
Recommended for resin and
polyimide bonded wheels,
for optimised tool life with
good particle retention,
reduced grinding forces and
reduced heat generation.
Nickel coating at 60% of
total particle weight.
Recommended where
highest mechanical
retention in phenolic resin
bonds and polyimide
bonding systems is
required. Maximises
mechanical retention and
heat dissipation at most
aggressive material removal
rates.
Copper coating at 50% of
total of FRD particle weight.
Recommended for dry
grinding applications.
Reduces heat generation.
Improves chemical and
mechanical diamond
particle retention.
Size Availability
Product
Density [g/cm³]
FRD-X2
FRD-X2 N56
FRD-X2 N30
11.2014
FRD-X2 NS60
FRD-X2 C50
www.vanmoppes.ch
L.M. Van Moppes & Sons SA P.O.Box 1550 1211 Geneva 26 Switzerland
T.+41 22 342 34 50 F. +41 22 342 34 51 [email protected]
www.idf-superabrasives.com