P O R T A B L E Air Conditioner

05-03-457 A029-OK.PDF
Instruction Manual
P O RTA B L E
Air Conditioner
Model No.
WA-1400E Model No. WA-1410E
Model No.
WA-1400H Model No. WA-1410H
ʳ
It is important that you read these
instructions before using your new
purchase and we strongly
recommend that you keep them in a
safe place for future reference.
05-03-457 A029-OK.PDF
TABLE OF CONTENTS
THANK YOU
ENERGY SAVING TIPS………..……………………………………………….. 2
SPECIFICATIONS..……………………………………………………………….3
BEFORE USE……….……………………………………………………………. 4
PARTS………..…………………………………………………………………….5
INSTALLATION.…………………………………………………………………...6
MOUNTING OF THE EXHAUST PIPE ………………………………………... 7
INSTALLATION OF THE CARBON FILTER…………………………………...8
OPERATION ………………………………………………………………………9
NOTICE.…………………………………………………………………………..12
DRAINAGE………………………………………………………………………. 13
MAINTENANCE…………………………………………………………………. 15
TROUBLE SHOOTING………………………………………………………….16
DEFECTIVE NOTICE…………………………………………………………... 17
GUARANTEE……………………………………………………………………. 18
SAFETY POWER SUPPLY
CORD……………………………………………………………..19
1
05-03-457 A029-OK.PDF
THANK YOU
Thank you for choosing the portable air conditioner from SPTUSA, a leading
brand in indoor air treatment. We would like you to enjoy the many benefits
this unit offers, so please take the time to read this manual carefully and take
full advantage of the many advanced features that your SPTUSA Air
Conditioner offers you.
SPTUSA specialize in complete indoor environment control, manufacturing
world-class air conditioners, dehumidifiers and air purifiers with innovative
technology.
In designing these advanced products, we have listened carefully to our
customers and have passed their views onto our research and development
laboratories.
We wish you many years of enjoyable use.
After reading this manual, please keep it in a safe place for future reference.
Energy Saving Tips
Please use the unit in the recommended room size. (Refer to PAGE 3).
Do not locate the air conditioner where furniture or other objects can
obstruct the airflow.
Keep blinds/curtains closed during the sunniest part of the day.
Close fireplace damper and floor or wall grills so that cool air does not
escape through the chimney or ductwork.
Keep filters clean.
Set the unit to maximum cooling and high-speed fan initially, then adjust the
unit to a comfortable setting.
NOTE: It is recommended to turn on the air conditioner when the room
temperature is around 75˚F. Do not wait until the room is excessively hot.
2
05-03-457 A029-OK.PDF
SPECIFICATION
Cooling capacity
WA-1400E
WA-1410E
14000 BTU/hr
Heating capacity
-
Model no.
Power/Ampere
consumption for cooling*
Power/Ampere
consumption for heating*
Air volume (max. speed)
Humidity removal capacity
Recommended room size
Power supply
Compressor
Refrigerant
Refrigerant load*
Fan speed
Timer
Working temperature
Thermostat
Exhaust pipe
Net Weight
Dimension
WA-1400H
WA-1410H
14000 BTU/hr
14000 BTU/hr
1250W/ 11.0A
1250W/ 11.0A
-
1250W/ 11.0A
580m3/h
580m3/h
53.9 L/day
53.9 L/day
500sq.ft.
500sq.ft.
115V/60Hz/1phase
Rotary
R-22
680 g
3
1~ 24 hours
Cooling: 64.4o F~ 110o F
Heating: 41o F~ 80.6o F
62 o F ~ 90 o F
5 in x 59 in
86 lbs.
14 x 21 x 30 in (WxDxH)
REMARK:
1. The data marked with '*' may vary for technical reasons.
2. Measuring condition for above is: Cooling – RT80.6 oF, RH60%
Heating – RT68 oF, RH60%
*RT means room temperature
*RH means room humidity.
•
•
Un-insulated rooms such as sunrooms, garages, or attics should be less
than 500sq.ft.
The following may effect the unit in reaching your set tempearature:
Outside Temperature, Room Size, Ceiling Height, Room Insulation,
Number of people in the room, Direct Sunlight and Source of Heat.
3
05-03-457 A029-OK.PDF
BEFORE USE
Important!
Transport the unit in an upright position only or leave in upright position
for at least 2 hours before use. Keep at least 20 inches away from the
wall. (Figure 1 & 4)
Always place the unit on an even surface.
Make sure the unit is connected to a correctly grounded power supply
(refer to the rating label located at the back of the unit).
FIG. 1
An opening in a window or wall is required to accommodate the
exhaust hose (kit supplied) to expel the warm air.
Do not cover or obstruct the appliance inlet or outlet grilles (Figure2).
To avoid the risk of shock, the product should never be used in
bathrooms, shower rooms or in any other steamy/wet areas (Figure 3).
The unit will cool when the room temperature is between 64°F and
110°F depending on the thermostat setting.
FIG. 2
Do not sit or place objects on the unit.
Do not touch the unit with wet/damp hands or when standing barefoot.
Avoid all contact with chemical based materials.
The filter must be used with the product at all times. When removing for
cleaning, always disconnect the power first.
Turn off the appliance when not in use.
For storage, drain all water and clean the unit / filters before storage.
FIG. 3
Drainage of the water container is required before moving the unit or
putting it into storage.
If the electric socket is different from the plug provided, have a qualified
electrician replace the plug with a suitable one. Avoid the use of
adaptors, multiple sockets and/or extension cords; if their use is
necessary, ensure that they conform to the current safety regulations.
Do not pull the power cord or place it near a source of heat; always
unroll it completely to avoid the possibility of dangerous overheating.
If the power cord is damaged, it must be replaced by a service agent or
a similarly qualified person.
THE MANUFACTURER DISCLAIMS ANY RESPONSIBILITY IF THE
ABOVE INSTRUCTIONS ARE NOT FOLLOWED.
4
FIG. 4
05-03-457 A029-OK.PDF
PARTS
Front
Back
FIG. 5
1. Control Panel
2. Air outlet
3. Carrying handle
4. Caster
FIG.6
5. Air filter
6. Air inlet
7. Exhaust air outlet
8. Water stopper / drainage point
9. Cord storage
Accessories
10. Inward adaptor - for insertion over hose
and connect to back of the air conditioner.
11. Round connector - for insertion over hose
and into foam strip (or into hole in the
wall/window).
12. Exhaust hose:
Length: 14”-60”
Diameter: 4.75”
13. Round cap for to cover round connector
when unit not in use.
14. Foam strip - for filling the open window
space, with opening for inserting the hose
& round connector. 7” x 24” x .75”
15. Foam strip - for filling the open window
space: 7” x 24” x .75”
16. Drain tube for continuous drainage
17. Active carbon filter
18. Remote control
19. Water tray
FIG. 7
5
19
05-03-457 A029-OK.PDF
INSTALLATION
EXHAUST PIPE INSTALLATION
The unit is a portable air conditioner that may be moved from room to room.
1. Using the foam strips / Window installation
Used to cover the window gap and can be cut to size if necessary.
Foam strips
K
LQF
a
•
•
•
•
FIG.8
Attach hose to unit and insert other end through the foam strip.
Attach Round Connector (part 11) by turning clock-wise.
Insert strip into window gap as shown and slide window across so that foam is held
securely. This technique may also be used for sash windows. Note: Take care to
maintain protection against intruders.
The best distance between the machine and window or wall is 31~39 inches.
2. Using the adaptor / Wall installation
FIG.9
Wall or Window
Round connector
K
LQF
FIG.10
a
•
•
•
•
•
Cut a 5” diameter hole in the wall or window.
Attach hose to unit and insert other end through the wall (or window).
Attach Round Connector (part 11) from the outside.
You may secure the Round connector to the wall by using small screws (not included)
through the holes.
When not in use, cover the opening with the cover provided.
6
05-03-457 A029-OK.PDF
Mounting of the exhaust pipe
•
Use only the hose provided. Attach
hose to back of unit by connecting
the adaptor.
•
Avoid kinks and sharp bends in the
exhaust hose as this will cause
expelled moist air to build up and
the unit will overheat and shut
FIG.11
down. Fig 11 & 12 shows correct
position
•
The hose may be extended from 12
inches to 59 inches but for
maximum efficiency use the
shortest length possible.
FIG.12
FIG.13
WARNING!
The length of the exhaust pipe is specially
designed according to the specification of
this product. Do not replace or prolong it
with your own private hose as this could
cause the unit to mal-function.
FIG. 14
7
05-03-457 A029-OK.PDF
Installing the Carbon Filter
1. Remove the filter frame from the
unit.
2. Unclip and remove one side of the
frame.
3. Remove the active carbon filter
from its plastic bag.
4. Insert the active carbon filter into
the filter frame.
5. Replace the other half of the
frame.
6. Re-insert the filter frame inside the
unit.
7. It is recommended to replace the
carbon filter every 3 to 6 months.
Replacement Filter:
FIG. 15
To purchase Replacement
Filters for this unit, contact
SPTusa at 1-800-330-0388 and
request model number WA1400F.
FIG. 16
8
05-03-457 A029-OK.PDF
OPERATION
Control panel
$872
212))
&22/
)$1 +($7
/R
0,
+,
7,0(5
57 :) 7
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Automatic mode indicator
Cooling mode indicator
Fan mode indicator
Heating mode indicator (for cool & heat
models only).
Low ventilation indicator
Medium ventilation indicator
High ventilation indicator
Timer operation indicator
“Room temperature” indicator
“Water Full” indicator
“Set temperature” indicator
Sleep function indicator
Indicator for UV-Tio2 or Ionizer function (only
for models with UV-Tio2 / Ionizer function)
'2:1
83
6/((3
89,21
FIG.17
14. UV-Tio2/Ionizer switch (only for models
with UV-Tio2 or Ionizer function)
15. Sleep function button
16. “Temperature up” button
17. “Temperature down” button
18. LCD display
19. ON/OFF (power) button
20. Timer
21. Speed (ventilation) button
22. Mode (function) option button
23. Receiver for remote control (see below)
23
Turning ON/OFF
1.
Press ON/OFF button, the unit will start in AUTO mode (only when the unit is plugged in
first time). If the ambient temperature is
higher than 75oF, the unit will work in cooling mode.
higher than 68oF but below or equal to 75oF, the unit will work in ventilation mode.
below 68oF, the unit will work in heating mode (this is for cooling & heating models only).
** To by-pass this default setting, press mode to select COOL or HEAT mode.
2.
Indicators of the functions in progress come on at the same time, e.g. Cool and Lo=Cooling
mode with Low fan speed. *NOTE! The display window shows the ambient room
temperature from 32oF to 122oF.
3.
To turn the unit off, press ON/OFF button again.
4.
When turning the unit back on, the unit will return to your last setting.
Setting mode/function
Press MODE button to select required working mode: automatic, cooling, fan or heating, (Heating
is only available for heating & cooling models.)
The indicator of your selected mode comes on.
9
05-03-457 A029-OK.PDF
Auto Mode
When this mode is selected, the unit is preset to the following temperature settings and unit will
only start to:
Cool when room temperature is higher than 75°F
Heat when room temperature is lower than 68°F
(WA-1400H &WA-1410H models only)
If room temperature is between 68°F and 75°F, unit will stay in Fan mode. Again, when in Auto
Mode, the temperature settings cannot be changed.
Setting temperature
The pre-setting temperature of this machine is: 75oF for cooling, 68oF for heating.
Setting the Temperature in Cooling or Heating Mode
The display window’s default is to display the ambient room temperature and green indicator
light under RT is on. (RT = Room Temperature)
To set your desired temperature, press the Temperature up or down button (ranging from
62°F to 90°F). Each press will increase or decrease your set temperature by 1°F. When
pressing the temperature up or down button, the window will change to display your set
temperature. At this time, the green indicator will light under ST (Set Temperature). Once the
temperature up or down button is released, the window will return to displaying the ambient
temperature after a second.
Note: When unit is in the following modes: Cool, or Heat - the compressor will cool/heat the
room to reach the set temperature. Once the ambient temperature has reached the set
temperature, the compressor will stop and unit will run in Fan mode. In Cooling or Heating mode,
it will wait for a 2°F as an allowance to conserve energy. For example:
In Cooling Mode with a set temperature of 70°F
When compressor first stops after reaching 68°F, unit will auto-switch to Fan.
Compressor will start cooling again when ambient temperature increases to 72°F or above.
In Heating Mode with a set temperature of 72°F
When compressor first stops after reaching 74°F, unit will auto-switch to Fan. Compressor will
start heating again when ambient temperature drops to 70°F or below.
10
05-03-457 A029-OK.PDF
Setting ventilation speed
1.
Press SPEED button to choose the desired ventilation speed: High, Medium or Low. The
indicator respective speed will light on at the same time.
2.
If the unit is in AUTO mode, it will choose the ventilation speed automatically according to
the ambient temperature (the related indicators will light on), at this time, this button is
invalid.
Setting timer
1.
Pressing the TIMER button while unit is operating will set desired operating hours (1 to 24
hours, the timer indicator will light on). When the set time has been reached, the machine
will turn off automatically. The display window will show the hour(s) you set as you press the
TIMER button. If the timer button is not pressed, unit will work continuously.
2.
Pressing the TIMER button while unit is off will PRE-SET the time for the machine to start
working. For example, if you press the timer to '2', the unit will start operating automatically
after 2 hours.
Sleep function
1.
2.
3.
4.
5.
o
By selecting the SLEEP button in cooling mode, the set temperature will increase 2 F
st
o
nd
automatically after the 1 hour, and another 2 F after the 2 hour, then keeps at that
temperature.
o
By selecting the SLEEP button in heating model, the set temperature will decrease 2 F
st
o
nd
automatically after the 1 hour, and another 2 F after the 2 hour, then keeps at that
temperature.
Re-press the SLEEP button, the setting temperature will return to your set temperature.
The unit will shut down automatically after running in SLEEP mode for 12 hours.
Auto mode will not work in this function.
UV-TiO2 / Ionizer function
(This is only for model with UV or Ionizer function)
1.
2.
To start the UV or Ionizer button, press UV/Ionizer button.
Unit will start to clean the air and improve air quality.
UV-TiO2: Oxidization and decompose viruses, organic materials, odor and bacteria.
Ionizer: Negative Ionizer creates negative ions, and neutralize with the positive ions in the air.
Memory IC function
This unit is incorporated with a Memory IC. If the power is cut and then resumes, unit will
automatically restart in your previous setting. Please allow 3~5 minutes for the compressor to
regain function.
All the above functions can also be performed with the supplied remote
control (see fig.18).
This remote control requires 2pcs AAA batteries to operate
FIG. 18
11
05-03-457 A029-OK.PDF
Regulating air flow direction
Adjust louver on the air vent horizontally to
control air flow direction.
FIG. 19
NOTICE !
The compressor will start approximately 3 minutes after the compressor is turned off (this
will help prolong the life of the compressor). After switching the unit off, please wait at
least 3 minutes before turning the unit back on.
The cooling system will switch off if the room temperature is 1ºF lower than set. The fan,
however, keeps working at the set level. If the ambient temperature rises above the chosen
level +2ºF, cooling will resume.
In heating mode, the compressor will switch off if the room temperature is 1ºF HIGHER than
the one set. As the room temperature drops below the chosen temperature –2ºF, heating will
resume.
This machine is equipped with an ANTI-FROST function. While using the heating function during
low temperatures, sometimes the heating will stop for a while to melt the internal frost. When this
occurs, just wait for heating to resume.
12
05-03-457 A029-OK.PDF
.DRAINAGE
During the process of cooling or heating, some water will be extracted from the air. Most of this
water is used to cool the cooling coils and make the unit run more efficiently. This is a feature not
found in most other portable air conditioners. If the unit is operated in a VERY HUMID
environment, water will start to collect in the built-in water reservoir. When the water tank
becomes full, the compressor and fan will stop. The water full indicator (W.F.) will lit to inform you
to empty the water tank. To resume cooling or heating, please empty water by one of the
following methods:
Draining into a Container
(Use the water tray supplied in the package)
1. Turn off the unit.
2. Position the water tray under the drain spout.
3. Remove the drain knob & rubber plug from the drain
spout. Water will flow out automatically.
4. When the container is almost full, replace the
rubber plug into the drain spout to stop the water.
Empty the container.
5. Repeat steps 2, 3 & 4 until water is emptied.
6. Replace the rubber plug into the drain spout firmly.
The Full Water indicator should be off now.
7. Replace the drain knob.
NOTE
Do not allow water to drip continuously into the supplied
tray or other containers while operating, as it may easily
overflow.
Water hole
Rubber plug
Drain knob
FIG.20
If you wish to operate the unit without the need to empty the water tank, please:
Continuous Drainage
1. Remove the drain knob and rubber plug
and keep them for future use.
2. Use Teflon tape to cover threading on spout,
making a flat surface for the hose. This will
prevent leakage.
3. Connect supplied water tube (or one with
FIG.21
3/4” internal diameter) to the spout.
Condensed water will now flow out this tube
automatically.
4. To extend the supplied tube, please connect
to a tube with a ¾” outside diameter.
Rubber plug
Drain knob
Drain tube
FIG. 22
13
05-03-457 A029-OK.PDF
Original drain
Extended
drain tube
(OD: 3/4in)
NOTE
The drain tube must be at or below the
outlet level.
Water Full (full water) indicator will not
FIG.23
function in this mode of drainage.
If you wish to extend the water tube, please
connect with another tube (outside
diameter 3/4").
Special caution for heating function!
While using the heating function, please note:
1. Install the exhaust hose to exhaust cool air
outdoors. (Please refer to page 6 for
instructions on installing the hose.)
2. It is recommended to attach drain tube for
continuous drainage, as water will collect
much faster in Heating mode.
3. Working range for heating function is 41ºF to
80.6ºF (for cooling function, it is 64.4º to
110ºF). For temperature outside this range,
the unit may not work properly.
Drain tube
FIG.24
14
05-03-457 A029-OK.PDF
.MAINTENANCE
Always unplug the unit before cleaning and maintenance.
Cleaning the Housing
Use a soft, damp cloth to wipe the body clean.
Never use strong chemicals, oil-based products, detergents, chemically treated cloths
or other cleaning solutions. These could possibly damage the cabinet.
Cleaning the Filter
First remove the black active carbon filter from the frame, tap lightly to remove loose dust
and dirt. Use a vacuum cleaner or tap the white filter lightly to remove loose dust and dirt.
Then rinse the white filter thoroughly under running water (no hotter than 104°F). Let dry
under sun thoroughly before replacing.
Do not wet the active carbon filter! Remove from frame before washing.
Notice! Never operate the unit without the filters.
End of season storage
Unplug the unit and drain the condensed
water COMPLETELY (please refer to page
13). Clean or change the filter.
On a warm day, turn the unit to fan mode for a
couple of hours so that the inside can dry out
completely.
It is recommended that the unit be put back
into its original carton for storage.
Do not stack heavy objects on top of the unit.
Cord
Storing The Power Cord
When the unit is not in use, please store the
power cord away as shown in Figure 25.
FIG.25
15
05-03-457 A029-OK.PDF
.TROUBLE SHOOTING
The unit doesn’t run or only runs in fan
mode
Is the machine plugged in?
Is the main power supply on?
Is room temperature within working
temp range?
Is unit set in Auto mode? Select Cool or
The unit seems to do little
The unit seems to do nothing
The room is not cold enough
Too noisy
The compressor doesn’t run
Heat mode and set to proper
temperature.
Is there direct sunlight? Please draw
curtains and blinds.
Are there too many windows or doors
open?
Are there too many people in the room?
Is there something in the room that
produces a lot of heat?
Is the dust filter dirty?
Is the air intake or outlet dirty or
blocked?
Is the room temperature below the set
temperature?
The room being cooled should have
proper insulation. If the unit is being
used in UN-INSULATED rooms such as
sunrooms, garages, attics or the like,
ideal cooling may not be attained.
Is the unit positioned unevenly so as to
create vibration?
Is the unit placed on stable and even
ground?
The overheat protection feature on the
compressor may be on. If this occurs,
wait for the temperature of the unit to
drop.
Is the water tank full? Does it need
draining?
Setting was changed. Please allow 3
minutes for compressor to resume.
ƿ Never try to repair or dismantle the unit yourself
16
05-03-457 A029-OK.PDF
.DEFECTIVE NOTICE
If this product is defective or not working properly
Please DO NOT return to your retail store
Please contact us directly with any Service or Technical Assistance
Contact us toll free at:
1-800-330-0388
REPLACEMENT FILTERS:
To purchase Replacement Filters for this unit, contact SPTUSA at
1-800-330-0388 and request model number WA-1400F.Λ
17
05-03-457 A029-OK.PDF
Portable Air Conditioner / Heater
Your Guarantee
If this product is found to be faulty as a result of faulty materials or
workmanship within one year from date of purchase, it will be repaired or
replaced free of charge. This guarantee is subject to the following terms:
SPTUSA, must be notified of the fault.
Proof of purchase must be presented to SPTUSA’s nominated representative.
The warranty will be void if the product is modified, misused or repaired
by an unauthorized person.
The guarantee after repair or replacement will not be extended beyond the
original one year period.
All replacement parts or units will be new or reconditioned.
Parts or units, which are replaced, become the property of SPTUSA.
The warranty applies to the use of this product in the United States.
Freight charge is not included in the warranty.
This GUARANTEE is in addition to your Statutory Rights.
Sunpentown Int’l Inc.
1-800-330-0388 www.spt-usa.com
Dear Customer: Please keep this warranty for your record. DO NOT return it.
18
05-03-457 A029-OK.PDF
SAFETY POWER SUPPLY CORD:
This Portable Air Conditioner is provided with a Leakage Current Detection and
Interruption circuit (LCDI) built into the plug of the power supply cord.
This device provides protection to reduce the risk of fire due to arcing faults in the
power-supply cord. Each time before using the Portable Air Conditioner, follow the
“plug Testing Instructions” given below to ensure that the LCDI circuit is functioning
properly.
PLUG TESTING INSTRUCTIONS:
1.
PRESS TEST BUTTON. UNIT SHOULD TRIP.
2.
PRESS RESET BUTTON FOR USE.
Note: Please do not use this item if above test fails.
The conductors inside this power supply cord are surrounded by shields, which
monitor the leakage current. These shields are not grounded. Periodically examine
the cord for any damage. If the shield gets exposed, immediately unplug the power
supply cord and do not use the Portable Air Conditioner. Do not repair a damaged
cord. Replace the damaged cord with a new replacement power supply cord or
obtain a new replacement power supply cord by calling Sunpentown Int’l Inc. at
1-800-330-0388.
In the event the LCDI Plug of the power supply cord trips by itself, first examine the
cord for any damage. If there is no damage to the cord then press the RESET
button. If the LCDI Plug trips again, then immediately unplug the power supply
cord. Replace the damaged cord with a new replacement power supply cord or
obtain a new replacement power supply cord by calling Sunpentown Int’l Inc. at
1-800-330-0388.
Do not use the TEST and RESET buttons as an ON/OFF switch. They are only
meant to periodically check the LCDI plug.
19