Concrete/Masonry - Tile Saws, Drill Rigs, Diamond Blades, Core

Transcription

CONCRETE SAWS
CC1300XL PORTABLE SAW
Extra sturdy handles adjustable to 4 positions
for precise control. Doesn’t rattle like
other adjustable handles.
Available with
Honda gas engine
or with optional
5 HP electric motor
(1 or 3 phase).
Available as an optional
10 HP electric saw with
20" blade cpacity
(on an extended frame).
CONCRETE SAWS
CC3700 WALK-BEHIND SAW
Forward-positioned motor for
more weight at the blade
and less at the operator.
CONCRETE SAWS SPECIFICATIONS
Also available with
a 25, 30 or 40 HP
electric motor.
One hand
sawing control.
Features powerful
65 HP Wisconsin
gas engine
(also available
with 30 HP Deutz
diesel engine).
Left or right
hand sawing.
Model
—
—
4-5/8"
6-5/8"
7-5/8"
2,600
1-1/4"
1" with
drive pin
—
4-5/8"
—
7-5/8"
2,600
1-1/4"
1" with
single drive pin
—
Blade Shaft Drive
—
Blade Mounting
Blade Raise and Lower
—
—
3 belt (13 HP),
4 belt (16 HP & up)
Left or rightt
Screw feed
Blade Coolant
—
—
Blade Guard Attachment
—
—
Front Wheel Dimensions
Rear Wheel Dimensions
Handle Bars
—
—
—
Maximum Depth of Cut with 14" Blade
Blade Shaft RPM
Blade Shaft Diameter
Arbor Diameter
Blade Shaft Bearings
Through rear axle for
added strength.
Frame designed
for the higher
torque of a large
horsepower engine,
but more compact
than the CC6500 saw.
6-5/8" maximum cutting
depth with 18" blade guard.
Solid, sealed self aligning
blade shaft ball bearings.
Available with push
or hydrostatic
transmission.
Screw feed raise and lower mechanism.
Handle adjusts to
operator’s height.
Available with
gas, electric
or hydraulic
power.
Updated handle
design with four
rubber grips.
Choice of Sundstrand
or Eaton transmissions.
14" through 36" blade capacity.
One hand
sawing control.
Strongest frame
in the industry.
Forward positioned
motor - less strain
on the operator.
Left or right
side sawing.
Fits through a
36" door.
Large saw features
in an easily
maneuverable saw.
Maximum cutting
depth 7-5/8" with
20" guard.
Your choice of 14" or 20" blade guard.
35 HP gas or 20 and
30 HP electric motors.
Ideal for municipalities
and rental stores.
Strongest frame
on the market.
Your choice of 65 HP gas
or 40 HP electric motors.
14" through 48" blade capacity.
Available with
78 HP diesel,
65 HP gas
or 50 HP
electric engines.
Jackshaft design for high
torque, lower RPM
requirements for deep
sawing with large blades.
Forward-positioned
motor for more
weight at the blade.
Fits through
a 30" door.
Choice of 14"
through 30"
blade capacity.
22-3/4" cutting depth.
Maximum cutting depth of
12-3/8" with 30" guard.
54" maximum blade capacity.
Phone: 800.467.2875 or 270.443.8243
Fax: 270.443.2134
Strongest frame in the industry.
97
CC1300XL CC1800XL
Maximum Depth of Cut
Transmission
—
Drive Speed
Air Filter
Fuel Capacity
Electric Start
High Temperature Shut-off
Low Oil Alert
Hour Meter
Tachometer
Amp Meter
Cutting Depth Indicator
Quick Disconnect Blade Flanges
Quick Release Rear Wheels
Frame Lift
Telescoping Front Pointer
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Dimensions
Model
CC3700
12-3/8"
14-2/4"
22-3/4"
Left or right
Electro-hydraulic
pump
Dual multispray tubes
Slip-on through
30", Bolt-on 36"
and up
8" x 3" x 1"
10" x 3" x 1-1/4"
Tilt
Left or right
Electro-hydraulic
pump
Slip-on through
30", Bolt-on 36"
and up
8" x 3" x 1"
10" x 3" x 1-1/4"
Tilt
—
—
—
—
1-3/4"
1" with
single drive pin
Self-aligned double
concave roller
16 belt jackshaft,
10 belt engine
Left or right
Electro-hydraulic
pump
Slip-on through
30" guard, Bolt-on 36"
and up
8" x 3" x 1"
10" x 3" x 1-1/4"
Tilt
Sundstrand-Sauer
or Eaton Model 10
0-200 ft. per min.
4-stage
6 gallons
Standard
Standard
—
Standard
Optional
Standard
Standard
Standard
Standard
Standard
Standard
Sundstrand-Sauer
or Eaton Model 10
0-200 ft. per min.
4 stage
9 gallons
Standard
Standard
Pressure gauge
Standard
Optional
Standard
Standard
Standard
—
Standard
Standard
0-200 ft. per min.
4 stage
9 gallons
Standard
Gauge / warning light
Warning light
Standard
Standard
Warning light
Standard
Standard
Standard
—
—
Left or right
Electro-hydraulic
pump
Slip-on
5" x 2" x 1/2"
6" x 2" x 1"
6" x 1-12" x 5/8"
8" x 2-1/2" x 1-1/4"
Adjustable Height
Tilt
and reversible
Eaton Model 6
Sundstrand-Sauer
or push
0-80 ft. per min.
0-200 ft. per min.
—
4 stage
2 gallons
6 gallons
20 HP models only
Standard
—
Standard
Standard
Standard
Standard on 20 HP
Standard
Standard on 20 HP
Optional
—
Standard
—
Standard
—
Standard
—
—
—
Standard
—
Standard
40"
—
—
31-1/4"
60"
—
13-1/2"
12-3/4"
—
—
23-5/8"
22-3/4"
7-1/2"
16-3/4"
12-5/8"
10-1/2"
CC6500
14-3/4"
(19-3/4" with optional
48" conversion kit)
—
—
—
—
—
—
—
—
—
—
—
—
1-3/4"
1-3/4"
1-3/4"
1" with
1" with
1" with
single drive pin
single drive pin
single drive pin
Self-aligning double Self-aligning double Self-aligned double
concave roller
concave roller
concave roller
6 belt
6 or 8 belt
8 or 10 belt
CC1300XL CC1800XL
Saw Height
Min Length Pointer Up, Handle In
Max Length Pointer Down, Handle Out
Minimum Length Pointer Up, Handle Down
Maximum Length Pointer Down, Handle Up
Saw Height w/o Handlebar
Handle Extension
Frame Width
Frame Width (Rear)
Frame Width (Front)
Frame Length
Saw Width
Front Axle Center Length
Rear Axle Center Length
Wheel base Length
Blade Shaft max Height
98
CC3500
42"
—
—
36"
72"
36"
—
16"
—
—
30-5/8"
22-3/8"
10-5/8"
15-7/8"
15-7/8"
13"
CC7200
Eaton Model 10
CC3500
CC3700
CC6500
CC7200
47-1/4"
55-1/2"
112"
—
—
—
24"
23-3/8"
—
—
39-1/2"
29-7/8"
18-1/2"
18-1/4"
18-1/4"
16-1/2"
49"
59"
116"
—
—
—
24"
25-3/4"
—
—
46"
32-1/4"
19-7/8"
22-5/8"
21-3/8"
19-1/2"
52-5/8"
62-1/2"
124"
—
—
—
24"
27-5/8"
—
—
49-1/2"
36"
21-3/4"
24-1/2"
23-7/8"
19-1/2"
63"
70"
135"
—
—
—
24"
—
27-5/8"
37"
60"
43-1/4"
31"
24-1/2"
25-3/8"
28-1/2"
2401 N. 8th Street, Paducah, KY 42001 • www.kitmo.com
MASONRY / TILE SAWS
DRILL RIGS
DIAMOND
CORE RIGS
M-1 Drill Rig
CC800M SERIES BLOCK SAW
Delivers productivity, power and safety
while handling up to a 24" blade!
M-4 Rig
◆ Stay level blade guard
and enclosed shaft.
3-Speed,
Very Powerful
And Just 35 lbs.
Our Best Selling
Core Rig
◆ 1" to 10" bit capacity (14" with
one spacer).
◆ Dual switch/outlet control
panel and amp meter.
◆ Slide handle permits drilling in
tight areas.
◆ Streamlined base and carriage.
◆ 2-1/2" square column with
black oxidized finish.
◆ Quick changeover from
vacuum to anchor base.
◆ 6" wheels for better mobility.
◆ 20" or 24" blade
The #1 Pro Rig
In America
aluminum cutting cart
with Vulcanized rubber
non-slip top.
capacity (8" or
10" cut depth).
◆ 6" bit capacity (3" handheld).
◆ Converts to hand held drill
motor in seconds.
◆ Combination Stand quickly
angles to 45 degrees.
◆ 3-speed hand held drill motors
with overload clutches are
available with choice of 110V
electric, 220V electric, air or
hydraulic power.
◆ Mast can rotate 360 degrees on
swivel stand.
◆ Reversible slide handle (use on left side or right side of rig).
◆ High strength, hard anodized, 1-1/2" x 2" aluminum column.
◆ 4 adjustable slide bearings provide superior carriage rigidity.
◆ Carriage Lock.
M-2 Drill Rig
◆ Easy rolling 16" x 25"
◆ Water pump
standard on
all models.
◆ 2 V-belt drive.
◆ Foot pedal controlled
CC800M Specifications
Maximum Depth of Cut 8" (20" model),
10" (24" model)
Arbor Diameter
1"
Water Pump
Standard on all models
Blade Shaft Drive
Matched set of 2 gripnotch
V-belts
Blade Raise and Lower Counterbalanced, spring
tensioned head pivots on (2)
1" flange block bearings
Blade Coolant
Dual spray tubes, pump fed
(electric only), pump from
pan (gas only)
Air Filter
3 stage Cyclone (gas only)
Fuel Capacity
1 gallon
High Temp Shut-Off
Standard (electric only)
Starter
Recoil on gas models,
capacitor on electric models
operating head leaves
operator hands free
to guide material.
◆ Replaceable conveyor rails.
◆ Durable 3/16" steel frame.
◆ Fork lifting openings for
easy transport.
M-5 Drill Rig
CC300M MASONRY SAW
Our Best Selling
Core Rig
◆ Dual switch/outlet control
panel & amp meter.
◆ 4-spoke handle.
◆ Chrome plated 2-7/8"
square mast.
◆ Quick changeover from
vacuum to anchor base.
◆ 10" bit capacity (up to 36" with
spacers and a hydraulic motor
and pillow block).
◆ 6" wheels for better mobility.
M-3 Star Rig
Light Weight
And Economical
◆ Single switch/outlet control
panel & amp meter.
◆ Slide handle permits drilling in
tight areas.
◆ Mast swivels 360° in
combination base.
◆ 1-1/2" square mast.
◆ 1/2" to 6" bit capacity.
◆ Compact size for hard-toaccess location drilling.
◆ The most lightweight rig of
any in its class (combo
stand, wheel kit and switch
box weighs just 52 lbs.).
◆ 12-inch bit capacity (up to
36" with spacers and hydraulic motor and power pack).
◆ Easy quick-disconnect
motor mount.
◆ Angle drilling up to 45°.
◆ Easily adjustable slide bearings.
◆ Columns available up to 60".
◆ Quick release vacuum button.
◆ Extruded all aluminum lightweight column built with strength
and hard anodized for wear.
◆ Double column support for increased stability.
◆ Positive carriage lock.
◆ 4-spoke sliding handle (can be used on either side).
◆ Available with choice of electric, hydraulic or air motors.
◆ Convenient easy carrying handle (ceiling jack available).
◆ Very affordably priced!
◆ Powerful 3 HP motor.
◆ Longer motor life
due to a superior
air filter.
◆ Includes 2
spare air filters.
◆ Tool-free air
filter replacement.
CC300M with Optional
Wet Kit Includes
Water Pump
◆ Blade not included.
◆ 14" blade capacity.
CORE CUT TILE SAWS
Feature loaded Tile Saws that deliver fast, precision cuts
of tile, marble and granite.
CC900TE
◆
◆
◆
◆
10" blade capacity.
1-1/2 HP hig torque motor.
Removable stainless steel water tray.
Replaceable Liquid Cooled Bearing Housing extends bladeshaft
bearing life.
◆ Steel frame blade guard with brush for additional blade cooling
protection and overspray.
◆ Rip Cut 20" - 24", Diagonal Cut 14" - 18".
Electric Motor
WEKA DK12
◆
◆
◆
◆
◆ Saw head adjusts easily.
CC300 Specifications
Power Supply
115V/60Hz
Power
2 HP
Amp Draw
15 Amp
RPM
3600
Blade Capacity
14"
Max. Depth of Cut 5"
Max Length of Cut 16"
Material Size
8" x 8" x 16"
Weight
80 lbs.
Saw Height
24"
Saw Length
28"
Saw Width
23"
Hand held and portable.
14 Amp.
580 / 1400 / 2900 rpm.
Part No. 4244017.
CC1000T
Phone: 800.467.2875 or 270.443.8243
Fax: 270.443.2134
99
100
WET/DRY SAW BLADES /
DIAMOND CORE BITS
WET AND DRY DIAMOND CORE BITS
HEAVY-DUTY ORANGE TURBO BITS
◆
SPECIFICATIONS
THOWF - General purpose, moderate steel
THOWL - General purpose, heavy steel
◆
◆
◆
HEAVY-DUTY DRY HOLE SAWS
Our Dry Hole Saw bits are the best in the business.
We were the first to introduce them and nobody sells
more. Drill dry through block and brick in seconds.
No water needed. All bits have 5/8"-11 threaded hubs.
Dry bits have 9" drilling depth. Jacobs Chuck Adaptor
available for hammer drills 5/8"-11 thread to
straight shank.
SPECIFICATION
DH - Block and soft brick
Notes: Not all types of brick and block can be drilled. Please consult factory.
Not suitable for concrete or hard materials.
Dry Cutting Diamond Blades
LARGE DIAMETER CORE BITS
Our Heavy Duty Orange Turbo bit has high diamond
concentration for excellent speed in moderate to heavy
steel applications. This bit is one of the fastest general
purpose bits available.
Core Bore - the originator of lightweight
spoked hub large diameter bits.
Standard with our unique 45 degree
radial water sprayer.
In standard sizes to 48" (we can make
them up to 72" - any diameter quoted
upon request).
May be ordered with a variety of hub styles and thread sizes.
The Heavy-Duty Orange is our most popular
bit. It has a high diamond concentration for
excellent footage and drilling speed. Designed
for all types of wet drilling in applications with
light to moderate steel.
SPECIFICATIONS
H33F - Hard aggregate
HOL - General purpose, fast drilling
H64L - Asphalt/block, long life
Our Premium Black bit is the industry standard. Its very high diamond concentration gives maximum footage and drilling speed.
Designed for all types of wet drilling. Good in moderate to high
steel applications.
SPECIFICATIONS
P33F - Hard aggregate
POL - General purpose, fast drilling
P64L - Asphalt/block, long life
◆
◆
◆
◆
◆
Quality-engineered wet blades deliver maximum performance.
The very highest quality diamond blades in the industry, delivering the lowest cost-per-foot performance on the toughtest
applications and hardest aggregates.
Advanced asphalt, asphalt over concrete and green concrete wet
blades are designed with special hardened steel cores for added
blade life with minimal undercutting.
Custom arbor sizes are available.
Additional blade sizes are available upon request.
◆
◆
◆
Designed for fast, smooth cutting in many materials.
More constant depth of cut and far fewer blade changes
compared to abrasive blades.
Designed for use on high speed gasoline and electric hand held
saws. May also be used on masonry and low horsepower
(>20HP) concrete floor saws.
Great for cutting concrete, concrete curbing, brick or block
walls, expansion joints, precast and prestressed mateials and
much more.
Kit-Mo offers a full range of quality blades. By being able to match the right blade
to your job conditions, you can be assured of getting maximum performance from
your Diamond blade.
Phone: 800.467.2875 or 270.443.8243
Fax: 270.443.2134
PREMIUM – Premium quality diamonds and
concentration for the general contractor looking for a
multi-purpose blade for a wide range of materials.
All types: .250DD
• RED D303 P For cutting cured concrete, median barriers, concrete pipe, general purpose concrete, medium
hard brick, combination brick and block, and general
purpose masonry materials.
• GREEN D307 P For cutting concrete block, green concrete with
limestone aggregate.
• BLACK D309 P For cutting
green concrete and asphalt.
PREMIUM PLUS – Highest quality of diamonds,
with very high diamond concentration to provide
the BEST performance and lowest cost per cut to
the customer.
• RED D30 P+ For cutting
masonry, concrete, concrete
pipe, median barriers and
other similar materials.
• GREEN D70 P+ For cutting
concrete block, green asphalt.
101
TURBO – Premium – Designed for general purpose cutting on hard masonry
materials like tile, marble and
granite. The rim is designed for
fast cutting, better cooling and
minimal chipping.
• GOLD D15 PT PREMIUM .312 DD
TILE – Premium – Cutting continuous rim tile
blades are designed for chip-free
cutting and long life when used on
quarry tile, marble, slate and thin
wall ceramic tile.
• GOLD D10 PC PREMIUM .250 DD
MASONRY – ARCHER dry cutting masonry blades
have outperformed competitors’ blades in field tests on
various types of hard brick and other masonry materials.
This enables us to provide you with the best possible
blade for whatever masonry material you might be cutting. Our superior quality means quick, professional
looking cuts which adds up to more cuts per blade and
long term savings for you.
All types: .300DD
• GOLD D20 P+M For cutting very hard brick.
• RED D30 P+M For cutting
medium to hard brick.
• GREEN D50 P+M For cutting
combination brick, block.
• BLACK D70 P+M For cutting
block only.
CUP WHEEL – For grinding and removal of concrete
form marks, smoothing concrete, stone, masonry
surfaces and shaping.
PSW PREMIUM - Single row of diamonds economy performance.
PDW PREMIUM - Double row
of diamonds - maximum
performance
• GRAY D50 PSW PREMIUM
• GRAY D50 PDW PREMIUM
TUCKPOINTING – Designed to cut out mortar
joints. They allow a constant cutting depth and speed
while eliminating need for frequent blade changes. They
are used on small saws and hand grinders, cutting very
fast, with little dust. The extra wide segment means long
blade life and cleaning of joints in one pass.
• GOLD D30 PT For most very hard mortar joint removal
where speed is of the essence.
• RED D50 PT Where longer life is
needed for certain types of soft to
medium mortar joints.
• GREEN D70 PT For very soft,
or very old abrasive mortar for
maximum blade life.
CRACK CHASER – Double face V - Diamond
blades are used for beveling a random crack so it can be filled with
joint material. Factory floors, pool
decks, side walks, basement walls
and any crack that needs to be filled
with sealant.
• RED D50 PV PREMIUM
Wet Cutting Diamond Blades
GRINDING HEAD – For
grinding high spots and smoothing
rough concrete, much faster than
abrasive stones.
• GRAY 40 P+GW PREMIUM
PLUS - .300 DD
DRY HIGH SPEED BLADES
◆
STANDARD – General purpose low priced dry
diamond blade for small cutting jobs.
• RED D85 S General purpose for
that price conscious contractor.
.200 DD
• RED D205 S General purpose
for cutting brick, block, concrete and general purpose
applications. .250 DD
45 DEGREE BEVEL – Used for beveling each side
of a concrete joint before installing
compress neoprene joint material.
Also used when spalling joints
occur due to heavy traffic on concrete roads or airport apron areas.
• GRAY 50 PB PREMIUM
WET AND DRY DIAMOND BLADES
WET CURED CONCRETE BLADES
DIAMOND BLADES AND CORE BITS
CONCRETE / ASPHALT
PREMIUM - Low cost, high performance Diamond blades
for a wide range of concrete and asphalt sawing.
PREMIUM PLUS - Premium Plus quality, high diamond
concentration blades for better performance on concrete
or asphalt sawing jobs. Use on 18HP saws or larger.
SUPER PREMIUM - Super Premium quality, very high
diamond concentration, for very low cost per inch foot,
fast, free, dependable performance on concrete or
asphalt. Use on 30HP saws or larger.
PRO-SERIES - Highest Diamond concentration and quality give the lowest possible cost per inch foot. For the
sawing professional with large production jobs and high HP saws.
• PREMIUM - .250DD
• PREMIUM PLUS - .250DD
• SUPER PREMIUM - .300DD
• PRO-SERIES - .350DD
COLOR
GRAY
GRAY
GRAY
RED
GREEN
BLACK
102
Prem.
335 P
348 P
355 P
365 P
375 P
395 P
Prem.
Plus
435 P+
448 P+
455 P+
465 P+
475 P+
495 P+
Super
Prem.
635 SP
648 SP
655 SP
665 SP
675 SP
695 SP
ProSeries
735 PS
748 PS
755 PS
765 PS
775 PS
795 PS
TILE
STANDARD - Low priced tile blade for the small
cutting job.
PREMIUM - Continuous rim tile blades are
designed for chip-free cutting and long life when
used on quarry tile, marble, slate and thin wall
ceramic tiles.
PREMIUM PLUS - Continuous rim are designed for
the maxium cutting life for long life when used on
quarry tile, marble slate and thin wall ceramic tiles.
• GOLD 10 SC STANDARD .200 DD
• GOLD 10 PC PREMIUM .250 DD
• GOLD 10 P+C PREMIUM
PLUS - .375 DD
MASONRY
PREMIUM - Designed to cut or shape concrete,
brick, tile, cinder and other masonry materials. We
offer these high quality blades in four specifications
with each specification being available in two different grades. Custom widths and diameters are
available upon request.
PREMIUM - Premium concentration for low
initial cost for the small to
medium job.
PREMIUM PLUS - The work
horse grade that has premium
plus concentration and outstanding performance on all
masonry applications.
COLOR
GOLD
RED
GREEN
BLACK
Premium
30 PM
40 PM
50 PM
70 PM
Premium Plus
30 P+M
40 P+M
50 P+M
70 P+M
All Sizes Available
Call (270) 443-8243
REFRACTORY
PREMIUM PLUS - Premium concentration for low
initial cost for the small to medium job.
SUPER PREMIUM - Super concentration, are ideal
for sawing various refractory
materials for lining industrial
furnaces constructed with
Alumina, Magnesia, Zirconia,
Stiff Mud, Mullite and a variety
of other refractory materials.
COLOR
GOLD
RED
GREEN
BLACK
Premium Plus
30 P+R
40 P+R
50 P+R
70 P+R
Super Premium
30 SPR
40 SPR
50 SPR
70 SPR
Dry Cutting Core Bits
CORE BITS – PREMIUM - For
concrete block, lightweight block
and some brick with no steel MASONRY ONLY. These bits can
be used on either right angle
grinders or core drill machines.
• RED D20 P PREMIUM
Wet Cutting Core Bits
CORE BITS – PREMIUM - Diamond concentration for
drilling quickly through medium to hard aggregates with
medium steel.
PREMIUM PLUS - Concentration for
the professional driller. Faster cutting
with long life on concrete with heavy
steel. Higher diamond concentration.
• RED 30 P PREMIUM
• GREEN 40 P+ PREMIUM PLUS
ABRASIVE BLADES
DIAMOND BLADES
WHY USE DIAMOND BLADES...
Diamond Blades are the fastest, least
expensive way to cut hard materials other
than metal. Diamond is the hardest substance known to man and the best cutting
tool for hard construction, industrial and
stone materials.
Reinforced Abrasive Blades for
Concrete Walk Behind Saws
18 HP and Over
The combination of high temperature and high pressure produces
a blade with maximum density and hardness. Edmar Hot Press
blades last far longer than conventional abrasive blades when:
1. The horsepower of the saw is sufficient (18-65 HP)
2. The material being cut is soft and abrasive.
HIGH SPEED
Segmented – General Purpose
Approximately 90% of all High Speed
Applications can be accomplished with
General Purpose blades.
HS-CC – High Speed Cost Cutter
HS-CCP – High Speed Cost Cutter Premium
HS-V – High Speed Value Line
HS-S – High Speed Standard
HS-P – High Speed Premium
HS-PRO – High Speed Pro
HS-SP – High Speed Super Pro
Sizes:
12
12
14
14
16
x
x
x
x
x
.110
.125
.110
.125
.125
x
x
x
x
x
CC-170 – Simply the best in the business. It has no
equal. Extremely hard and dense, the CC170 will
provide maximum life in asphalt or green concrete
with limestone or slag aggregate. Far more effective
than dry cutting diamond blades!
쏔
쏔
쏔
쏔
쏔
x
x
x
x
.110
.125
.125
.125
x
x
x
x
쏔
쏔
쏔
쏔
ELECTRIC TOOLS
Small Diameter Segmented
SS-V – Small Diameter Value Line
SS-P – Small Diameter Premium
SS-PRO – Small Diameter Pro
SS-SP – Small Diameter Super Pro
Sizes:
7 x .095
8 x .095
9 x .095
10 x .095
Tuck Point
TP-V – Tuck Point Value Line
TP-PRO – Tuck Point Pro
TP-SP – Tuck Point Super Pro
TP-PX – Tuck Point Pro Extra
Sizes:
4 x .250
4½ x .250
Arbor
1
1
Part No.
CC170
01002
01015
Max
RPM
4365
3000
PREMIUM SERIES
CC-112
Designed for cured concrete with very hard aggregate.
쏔 All High Speed Blades have 1" arbor holes with 20mm
knock-out bushing standard. Other arbor sizes are
available on request.
4 x .080
4½ x .080
5 x .080
6 x .080
Size
Dia. Width
14
1/4
18
7/32
18 HP and Under
Universal
HU- High Speed Universal Cut blades can be
used on a broad array of materials; concrete,
asphalt and masonry. Use on saws less than
20 hp.
HU-P – Universal Segmented Premium
Sizes:
12
12
14
16
18-65 HP
CC-170
CC-132
8-18 HP
CC-132
Size
Dia. Width
14
3/16
Diamond Tools for construction, industrial and stone applications
Cup Wheel Segmented
Cup Wheels available with 7/8"
plain hole with 5/8" adapter or
5/8"-11 UNC threaded adapter.
CUP-PRO – Cup Wheel Pro
CUP-SP – Cup Wheel Super Pro
CUP-PX – Cup Wheel Pro Extra
Sizes:
4"
4"
5"
5"
7"
7"
Simply the best all around general purpose blade in the
industry! Works best in limestone or soft aggregates.
Use it for cured concrete, green concrete or asphalt.
Single Row
Double Row
Single Row
Double Row
Single Row
Double Row
MASONRY
Masonry Dry Cutting
MD-CC(5) – Masonry Dry Cost Cutter
MD-CCP(5) – Masonry Dry Cost
Cutter Premium
MD-V(5) – Masonry Dry Value Line
MD-P(3, 5, 7)* – Masonry Dry Premium
MD-PRO(3, 5, 7, 8)* – Masonry Dry Pro
MD-SP(3, 5, 7)* – Masonry Dry Super Pro
MD-PX(3, 5, 7)* – Masonry Dry Pro Extra
Sizes:
10
12
14
20
x
x
x
x
Phone: 800.467.2875 or 270.443.8243
Dry Cutting
PREMIUM SERIES
GPM-SS
General Purpose Concrete / Masonry – for use on all types
of concrete, asphalt, bricks, block and other masonry products.
GPS-SS
General Purpose Metal – for use on all types of steel, rebar,
angle iron, tubing and other metal.
GPD-SS
Ductile Iron – for use on ductile iron, cast iron pipe and metals
that are coated or lined with concrete.
Size
Dia. Width
12
1/8
12
1/8
12
1/8
14
5/32
14
5/32
1"
1"
1"
1"
Fax: 270.443.2134
103
Max
RPM
4365
Reinforced Abrasive Blades for
Portable Gas / Electric High Speed Saws
* Brick and Tile – Add “3” to Product Code if
option available.
Combination – Add “5” to Product Code if
option available.
Block – Add “7” to Product Code if option available.
Abrasive Block – Add “8” to Product Code if
option available.
5 x .250
7 x .250
Part No.
Arbor CC112 CC132
1
01362 01361
Arbor
1
20mm
7/8
1
20mm
Metal
GPM-SS
Part No.
CONC/MAS METAL DUCTILE Max
GPM-SS GPS-SS GPD-SS RPM
01601
01611
01607
6300
01602
01612
01608
6300
01603
NA/*
NA
6300
01604
01614
01617
5400
01605
01615
01618
5400
*Available in professional series only
104
GRINDING WHEELS / DISCS
TYPE 27 GRINDING DEPRESSED CENTER WHEELS
C24N - CONCRETE
A24N -
•
•
•
•
• Silicon carbide grain.
• Soft bond for
fast stock removal.
CONCRETE Masonry,
concrete, stone.
METAL Cast iron and other
ferrous metals.
FAST GRINDING
• Aluminum oxide grain.
• Soft bond for
fast stock removal.
METAL Ferrous Metals (iron,
steel, welds, etc.)
STAINLESS Low grade
stainless steel.
• For use on high
horsepower machines.
• Rugged fiberglass reinforcement
for maximum safety.
• Excellent for the
railroad industry.
METAL Mainline, secondary,
spur rail steel.
METAL Also for use on heavy
sections of ferrous metals
(I-beams, bar stock, etc.)
• Combination aluminum oxide and
silicon carbide formulation.
METAL Ductile™ pipe (very
hard steel casing enclosing a
cement lining), water mains, etc.
CONCRETE Combination
metal/concrete, cast iron, hard
metals, concrete coated steel, etc.
BRUTE™
• Long life.
• Extremely hard bond for cutting
metals that present a very sharp
edge to the wheel.
METAL Thin metal, sheet metal,
decking, other ferrous metals.
TYPE 1 CHOP SAW WHEELS
ARCUS™ Circular Saw Blade Guide System converts your circular saw into curve or
circle cutting saw and cuts arches and round designs for remodeling and home improvement projects fast. The system
includes a curved “ARCUS™
Professional Saw Blade” That allows
you to cut arches or circles freehand
with a circular saw. Used with the
“ARCUS™ Compass Guide” you can
cut perfect circles from 30" to 54" in
diameter in a matter of seconds, cut
like a professional framing carpenter.
C24N
TYPE 1 PORTABLE SAW CUT-OFF WHEELS
DUCTILE™
HOBO®
The ARCUS™ Cutting System will transform your circular saw into a perfect circle or an arc cutting
saw. This enables the professional and even the novice to cut a perfect circle or arch in seconds. The
One Minute Arch is an example of a perfect circle cut in half to make both sides of the perfect arch. The
finish is so smooth no sanding is needed for wood or composite decks, for projects such as maple table
top a fine grit sandpaper is all that is needed before sealing. The System includes a specially designed
ARCUS™ Contoured Professional Circular Saw Blade and the ARCUS™ Professional Guide.
A24N
A24R - LONG LIFE
Aluminum oxide grain.
Our most popular wheel.
For general purpose grinding.
Longer life for fewer
wheel changes.
METAL Ferrous Metals (iron,
steel, welds, etc.)
CIRCULAR CUTTING SYSTEM
A24R - GENERAL
• Provides consistent performance
with long life.
METAL Ferrous Metals (steel,
angle iron, rebar.)
C24R
A30S - LONG LIFE
• Special silicon carbide grain.
• Superior cutting action.
• 40% longer life than general purpose concrete wheels.
CONCRETE Masonry,
asphalt, concrete.
• Long life.
CONCRETE Stone, brick, soft
aggregate, masonry, concrete.
Big M.A.C.
• Special aluminum oxide grain.
• Fast, non-binding cutting.
METAL Ferrous metals.
STAINLESS Stainless
steel, high tensile alloys.
Some typical applications are: Doorway arches, dome ceilings, round windows, cathedral
arched windows, spiral or curved staircases, boat building, DIY (do it
yourself) projects, round tabletops of wood or plastic, concrete forms,
wood floor customizing, interior arches, deck designs, arbors, trellis,
hobbyist projects and customizing specialty packaging.
STUD KING®
• General purpose cool cutting on thin metals.
• Burr-free finish.
METAL Metal studing, thin rebar, light gauge metals.
A24R - LONG LIFE
A24N
• General purpose, long life.
METAL Ferrous metals
(iron, steel, angle iron, etc.)
A24R
C24R - CONCRETE
• General purpose, long life.
• Square cutting.
CONCRETE Masonry,
concrete, stone, brick.
TYPE 1 STATIONARY CUT-OFF WHEELS
A36R - LONG LIFE
A24N - FAST CUTTING
• A finer grit for burr-free finish.
(metal tubing, etc.)
STAINLESS Stainless
steel, high tensile steel.
• General purpose.
• Soft bond for fast
stock removal.
(iron, cast iron, etc.)
STAINLESS Low grade
stainless steel.
C16 - CONCRETE
A16
The New Revolutionary Patent Pending ARCUS™ Contoured Professional Circular Saw Blade cuts arcs or circles from
30 inches in diameter to 30 feet plus. Cuts can be started at the edge, or you may use a plunge cut. For a straight edge
adjust the bevel angel 5 to 10 degrees depending on the saw. The blade can be used freehanded to make arch cuts with
more than one radius, curve cuts, circle cuts and designer cuts.
• Coarse grit for tough grinding applications.
• Excellent for cleaning castings, mold marks
and removing flashing.
CONCRETE Masonry, concrete, stone.
• Coarse grit wheel
for tough grinding applications.
• Excellent for cleaning castings, mold marks
and removing flashing.
METAL Ferrous metals.
ARCUS™ Professional Circular Saw Blade is a 7-1/4" contoured circular saw blade with 24 teeth, ATB, C-6 carbide tips
and a 5/8" round arbor. Blade plate is .054 thick to provide stability and long life. Wide cutting kerf is 3/16 inch, which allows
the contoured blade to go through the cut with ease. The anti stick coating reduces friction so there is less gum up. The tempered blade is a full hardened body, yet maintains flexibility. Materials that can be cut are wood, plastic and fiberglass. The
C-6 carbide tips can cut through nails, but is not recommended for metal.
TYPE 11 GRINDING CUP WHEELS
C16
A16
HIGH PERFORMANCE FLAP DISCS
SAITLAM™ (flat shape)
The ARCUS™ Professional Circular Saw Blade fits most circular saws. (Contoured body, wide kerf and thicker plate make
the blade laying flat height 1/4 inch.)
• Available in 2A aluminum oxide, 3A aluminum oxide with grinding aid and Z zirconium
• Nylon 6/6 backing - a non-scratching, high strength backing resistant to temperature extremes,
common chemicals and solvents.
• Provides an even “finish ready” surface.
• Excellent for miter joints, corners and edges.
The ARCUS™ Professional Saw Guide helps in cutting a precise circle or arch and attaches to your circular saw. It easily adjusts from a 30" to 54" circle. For cutting larger arches and circles the ARCUS™
Professional Guide is available in large 6' to 12' and extra large 8' to 16'. The ARCUS™ Professional Saw
Guide is made of rigid 14-gauge tubular steel that will not bend or flex and it is welded for durability. The
white powder coating resists rust and is easy to find in the tool box.
NOTE: 4" and 4-1/2" Saitlam™ must be used with nut. 6-1/2" must be used with backing pad and nut.
Phone: 800.467.2875 or 270.443.8243
Fax: 270.443.2134
105
106
POWER CUTTERS
K750 (gas)
S1VR
K960 (gas)
Air-cooled, 2-cycle engine
74 cc
5.0 hp (3.7kW)
12" – 20.7 lbs. (9.4kg), 14" – 21.4 lbs.
(9.7kg)
12" – 3.3/4.7 m/s2, 14" – 3.1/4.9 m/s2
12" (300mm), 14" (350mm)
4" approx. (100mm), 5" approx. (125mm)
Engine
Displacement
Power
Weight, without fuel or blade
Cutting equipment, blade:
Diameter
Cutting depth
94 cc
6.1 hp (4.5kW)
14" – 22.9 lbs. (10.3kg)
16" – 24.7 lbs. (11.2kg)
14" (350mm), 16" (400mm)
K950 RING
K3000 ELECTRIC
Gasoline-powered
saw with double the
cutting depth
The handiest, most
powerful saw on
the market
Motor
Rated power
Weight K3000 Electric without
blade, incl. 8' cord (2.4m)
Weight K3000 Spray without
blade, incl. 8' cord (2.4m)
Weight Backpack
Tank
Diameter
Cutting depth
120 V
1800 W (120 V)
12" – 19.4 lbs. (8.8kg), 14" – 20.7 lbs.
(9.4kg)
14" – 20.7 (9.4kg)
10.1 lbs. (4.6kg)
1 Gallon (4 liter)
12" (300mm), 14" (350mm)
Engine
Displacement
Power
Diameter
Maximum cutting depth
94 cc
6.1 hp (4.5kW)
28.8 lbs. (13.1kg)
504 067 201
504 067 301
2-Cycle Oil; 48 bottles / case, 2.6 oz. / bottle (50:1)
2-Cycle Oil; 48 bottles / case, 6.4 oz. / bottle (50:1)
S1
MSG3
MS3-VR vibration reduced triple head scabbler is
designed for medium duty work in de-scaling, laitence
removal and concrete repair. The tools are made to
the same high standards for reliable and durable performance as other tools in the range but are vibration
reduced to allow the operator longer continuous use.
Also available standard breaker (MSG3).
MS3VR
1UF
1UFTVR
1UFTVR
For surface preparation of small areas or areas close
to walls or between rebars, the 1UF-TVR is second to
none. It’s also the ideal tool to compliment the U3-VR to
scabbler edges where larger machines cannot reach. It
can remove up to 4 square meters per hour x 4mm
deep, to a depth of 50mm. The vibration levels transmitted to the operator by these are typically less than
10% of the levels which are transmitted by the
“Standard” 1UF pole scabbler. Also
available standard breaker.
U3VR
U3VR/U5VR
Vibration Reduced Pneumatic Scabbling Tools are
specifically designed for all types of surface work on
concrete where it is necessary to carry out surface
hammering without damaging the basic concrete.
14" (350mm)
10" (260mm)
CCMk2VR
K950 CHAIN (gas)
U5VR
CCMk2VR
Concrete chain
saw with unique
versatility
OILGUARD PREMIUM 2-STROKE OIL
• A synthetic blend designed
for power cutters and any
2-cycle equipment used
in tough dirty conditions.
• Includes a fuel stabilizer.
• Lower engine
operating temperatures.
S1VR
MS3VR
VR (Vibration Reduced) SCABBLERS
Vibration front/rear
handle according to EN 1454
Diameter
Cutting depth
The S1-VR single head hand held scabbler is the ideal
tool for small awkward areas when removing laitence or
for concrete repair work. The tool is made to the same
high standards for reliable and durable performance as
the larger tools in the range with an additional benefit of
being vibration reduced to allow longer continuous use
by the operator. Also available standard breaker.
The best
power-to-weight ratio
on the market
More efficient
cutting with
DualCharge
engine
technology
Engine
Displacement
Power
SCABBLERS
The Pneumatic Vibration reduced crack chaser is
designed to follow cracks in concrete to allow for
a clean refilling of the hole for the new material.
VR SCABBLERS COMPARISON DATA
Model
Engine
Displacement
Power
Weight, without bar and chain
Bar length
Cutting depth
Phone: 800.467.2875 or 270.443.8243
S1VR
MS3VR
1UFTVR
U3VR
U5VR
CCVR
Air-cooled, 2-stroke engine
94 cc
6.2 hp (4.5kW)
20.7 lbs. (9.4kg)
14" (350mm)
15" (390mm) Straight Cut
Fax: 270.443.2134
107
108
HEADS
qty.
WEIGHT
lbs. kg
LENGTH
in. mm
WIDTH
in. mm
HEIGHT
in. mm
1
3
1
3
5
1
7.7 3.5
9.9 4.5
36 16.5
125 57
244 111
137 62
25 635
25 635
52 1320
50 1270
38 970
58 1450
–
–
–
–
–
–
25 635
22 560
20 500
5
7
–
33
39
35
127
178
–
838
990
865
WORKING WIDTH
in.
mm
0.88
3
3
5-5/8
11-1/4
7/8
22
75
75
143
286
22
AIR CONS
cfm L/sec
5
25
25
100
150
36
2.4
12
12
48
–
17
REC.WRKG
psi bar
90
90
90
90
90
90
6
6
6
6
6
6
HOSE
FITTING
1/2"
1/2"
3/4"
3/4"
3/4" BSP
3/4" BSP
SURFACE PREPARATION EQUIPMENT
TMC-7 –
7" Turbo Edge Grinder
GRINDER ACCESSORIES
Scarifier Assemblies
CPM-8 – 8" Scarifier
Hi-carbon steel cutter
assemblies in steel case.
- Standard cutters last
3 to 6 hours.
- Heavy-duty cutters last
8 to 12 hours.
Ideal for:
• Breaking up hard surfaced
deposits of oil-dri, fiberglass,
grout or plaster.
• Removing concrete buildup.
• Leveling brick or wood
block floors.
• Initial grinding of rough, broom-finished concrete.
• Preparing surfaces for overlayments.
• Tile floors.
• Texturing slippery floors.
Dyma-Serts™ (patented)
Production Rate: 7" working width
will grind approximately 400-500
lineal ft. per hour at 1/16" with an
EDCO Diamond cup wheel.
includes: 1-7" Diamond Cup Wheel and
Standard Vacuum Port.
Requires: 1-7" Diamond Cup Wheel.
Ideal for:
• Grinding tightly against any vertical surface.
• Grind around columns or under tanks and other
tight areas.
• Removing coatings, build-ups, markings, overlays
or paints.
2EC-2GC – Dual-Disc Grinder
Dyma-Serts are diamond segments welded to a backing
plate to improve grinding speed
and remove tough coatings.
Dyma-Serts grind 5 times faster
than grinding stones and last
longer – up to 30,000 square
feet (2,800 sq. m.) of grinding
action. Dyma-Serts can be
used for wet or dry grinding.
Production Rate:
8" working width will
scarify approximately
350-500 sq. ft. per hour
at depth per pass of 1/8".
Removes traffic lines at
800-1,000 lineal ft. per hour.
Ideal for:
• Smoothing rough surfaces or trowel marks.
• Grinding or polishing terrazo.
• Repairing surface damage to concrete slabs.
• Removing urethane or epoxy thincoats.
• Grinding sharp aggregates such as flint and granite.
• Removing surface imperfections from epoxy mortars.
• Leveling high spots.
• Removing thin mastics and thin-set.
Product notes: Optional edger attachment allows
the CPM-8 to get within 1-3/4" of any vertical surface.
Ideal for:
• Sidewalk trip hazard repair.
• Concrete and coatings removal.
• Floor cleaning and/or preparation.
• Traffic line and markings removal.
• Creating non-slip surfaces.
DYMA-SERT MATRICES
For Concrete
EG-1X
General purpose
EG-2X
Abrasive concrete
EG-3X
Epoxy mortars
2GC
Strip-Serts are carbide-tipped
blocks designed to clean
floors without grinding into
the concrete.
2EC
5' Ergonomic Steel Chisel Scaler,
air powered and equipped with
4" steel chisel.
Requires: 6-grinding inset accessories per loading.
Ideal for:
• Smoothing concrete in large and small areas.
• Light grinding or cleaning of concrete surfaces.
• Removing mastics, thin-sets, sealers, epoxies
and urethanes.
Phone: 800.467.2875 or 270.443.8243
Swimming pools
Storage tanks
Turbines
Conveyors
Equipment
Ship hulls
Fax: 270.443.2134
Wire Brushes
Wire Brushes are flat steel
strips mounted in wooden
blocks.
Ideal for:
• Removing deposits of
grease, wax, ink or food
products.
• Breaking up rubber-backed
carpeting.
(requires additional pad retainer)
Ideal for:
• Scrubbing of concrete, stone,
metal, brick, wood and tile floors.
Grinding Stones
Product notes: Provides 2,500 hits
per minute.
•
•
•
•
•
•
Ideal for:
• Removal of industrial buildups, tar, rubber, fiberglass,
grout or plaster.
• Roughening concrete.
• Grinding asphalt.
Ideal for:
• Removing mastics, paints, resins, tar, figerglass, rubber, ice and
industrial buildups.
Production Rate: Remove up to
200 sq. ft. per hour of 4" ceramic
tile set in standard thin-set.
Ideal for:
• Concrete slabs
• Platforms
• Ship decks
• Pontoons
• Mixers
• Silos
The Surfacer Disc assembly is
easily assembled for heavyduty surface build-up removal.
The cutter wheels can be positioned to meet removal needs.
Silabide Pads
• Replaceable, multi-sided
tungsten carbide edge
can be rotated for
maximum use.
• Cleans the surface
without damage to
concrete floor.
ALR-E:
Includes: 2-multi-accessory disc, 2" vacuum port and water
port, electric modes have 115/230 voltage selector switch.
For Terrazzo
EG-60X
60 grit
EG-80X
80 grit
EG-120X
120 grit
Strip-Serts™
ALR Chisel Scalers
Production Rate: 22" working width will grind
approximately 400-500 sq. ft. per hour at 1/32"
with EDCO Dyma-Serts™.
Surfacer Disc
Assembly
Various grits for coarse or
fine polishing.
•
•
•
•
•
Ideal for:
• Removing trowel marks.
• Removing rain spots.
• Leveling high joints less than
1/16" high.
• Removing excess concrete.
• Smoothing rough finishes.
• Grinding and polishing terrazzo and marble.
Docks
Truck beds
Pipelines
Scaffolds
Houses
109
110
Optional Weight
Tray Available for
Dual-Disc Grinder
POWER SWEEPERS /
REPLACEMENT BRUSHES
Industrial Sweepers /
Pick-Up Sweepers
For loaders, skid-steers, and tractors
FEATURES:
• Heavy-duty to meet your toughest sweeping needs.
• Choose from windrow or pick-up sweepers, with built-in
hoppers for offsite dumping.
• Front and rear mount units available with mechanical or
hydraulic drives.
• Quick change brush head.
• Poly, wire or poly/wire brushes available.
Pick-Up Sweepers
FEATURES:
• Powered by the
hydraulic system
of the prime mover.
• Motor is mounted
inside the
brush frame.
• Bi-directional brush and reversible gutter broom makes
for efficient operation.
• Heavy-duty detachable bucket.
• High volume capacity up to 2.75 yd.
• Heavy-duty swivel caster standard.
• Bucket not required to contact ground for normal operation.
• No chains required for operation.
• Pivot design allows gravity to swing sweeper head out of the
way when dumping material.
• Brush configurations available: polypropylene or poly-wire mix.
Tow-Behind Sweepers
For trucks or tractors
FEATURES:
• 4 models available with 32" diameter brush in widths
of 84" to 108".
• Heavy-duty units range from traction drive powered by the
sweeper wheels, to independent hydraulic drive powered by
the towing vehicle or engine up to 33 hp.
• Tow-behind your truck or tractor.
• Fast interchange between fleet vehicles.
• Compact two-wheel design for excellent maneuverability.
• Choice of pintle, ball or drop pin hitch.
Hydraulic Drive Sweepers
FEATURES:
• 32" bristles extend brush life.
• Brush drive slips easily out
of the core without removing
hydraulic lines from the
wheel motor(s).
• Brush core is reversible
from end to end for
even brush wear.
• Hydraulically angles
30º left or right.
• Brush configurations
available: poly or
poly/wire brush.
Walk Behind Sweeper
FEATURES:
• Infinitely adjustable
angling from 20° left and
right for variable conditions.
• Powerful Honda engine.
• Two brush speed ranges for
variable conditions.
• Five forward speeds,
neutral and reverse.
• Differential drive for two wheel
traction and ease of turning.
• Complete fill brush for no-streak sweeping.
• Balanced unit eliminates need for casters to sweep.
• Solid handle bars with cushioned grips for
comfortable operation.
• Brush hood covers 125° arc powder-coated for durability.
• Dimensions: 67" L x 42" W x 35" H, Weight: 274 lbs.
Replacement Brushes
FEATURES:
• Rugged poly, wire and combination sections available.
• Sections, strip brooms, tube
brooms and gutter brooms
from Sweepster are cost
efficient for all your
sweeping needs.
• Replacement brushes to fit
your job requirements.
Phone: 800.467.2875 or 270.443.8243
Fax: 270.443.2134
111

Concrete/Masonry - Tile Saws, Drill Rigs, Diamond Blades, Core

Transcription

Similar documents

Extreme curve cutting speed

Corrosion of Steel in Concrete

Wahl Deluxe Style Pro Clipper Quick Start Guide

Simple Toe-Nail Cutting Service Leaflet March 2013

Nordic Plow for Dixie Chopper Zee 2

CONTROLLED EXPANSION WATERSTOP

FELCO Directory

kombajn KTW200.cdr

Millau Viaduct

SYC-300M - Leadermac USA