Condensed Reel Catalog

Transcription

Condensed Reel Catalog
Our best selling reels
reelcraft.com/europe
Why use hose reels? Because they make hose
handling more efficient and safer. Your hoses,
cables and cords will last up to five times longer. You will improve hose management, which
decreases labor costs. Your chances of injuries
Safety tip - reduce
your trips and falls
from tripping hazards will decrease, which saves
lost work time, medical bills and higher insurance.
You also save the expense and time to replace
expensive hoses, cables and cords that get run
over by fork lifts and other vehicles.
“There are many situations that may cause slips, trips
and falls. The controls needed to prevent these hazards
are usually obvious, but too often ignored, such as...
coiling up extension cords, lines and hoses when not
in use and keeping electrical and other wires out of the
Truck courtesy of E&B Paving, Anderson IN
Why use hose reels?
Series TW7000
way. Practice good housekeeping. Keep cords, welding
leads and air hoses out of walkways or adjacent work
areas. Source: www.osha.gov
Five reasons why hose reels add value
Improve efficiency
Hoses, cable and cords are
where you want/need them.
Increase safety
Reduce tripping accidents
and lost work time.
Custom Built Reels
Reelcraft’s engineered products group custom
builds reels to your specifications. Our special
engineered products are developed for demand-
Minimize leakages
Reduce costs of air
and water leakages.
Hose and cords on reels can
last up to five times longer.
ing applications in areas such as marine,
military, aviation, hydroseeding, sewer and well
cleaning, offshore oil rigs, robotic cable and
much more. We offer flexibility, competitive
pricing and a lasting committment to excellence.
Increase productivity
No more tangled hoses
improves efficiency.
For more than 25 years, Reelcraft’s engineered
products group has produced custom products
to meet individualized requirements.
Marine
Grade u
Epoxy
Multiple
Spools u
Stainless
Steel u
Reduce hose wear
Turn-Key
Systems u
Two Year Limited Warranty
Planned stock program offers fastest service
Reelcraft now offers a two-year limited warranty. All
reels manufactured by Reelcraft Industries, Inc. are
warranted to be free of defects due to faulty material
or workmanship for 24 months from date of shipment.
Exception: hose - 6 months. Normal wear and tear is
not considered a defect in material or workmanship.
Our primary inventory ready to ship is located in Corby, UK. Our goal is to
service customer needs from stock on the items noted within this catalog for
orders of 5 or less. Large orders may require a longer lead time.
NOTE: For complete warranty information, online
warranty registration and return information please
visit reelcraft.com.
Front Cover Images: L-R: Series 9000 ultimate duty
vehicle mount hose reels; Series 7000 heavy duty spring
retractable hose reels; Series 80000 heavy duty dual
pedestal hose reels.
2
Reelcraft’s global headquarters’ office and manufacturing space is a state-of-the-art 130,000
square foot facility located in Northeast Indiana since 1971.
+44 (0) 1536 406999
www.reelcraft.com/europe
Reelcraft: Better by Design
Reelcraft’s reels are better by design because
of our lasting commitment to excellence.
Our engineering team is well known for
designing durable, high quality products.
Our standard features include durable,
corrosion-resistant powder coat paint, multiposition guide arms for versatile mounting
options and heavy-duty, reinforced steel
stampings for increased strength. Our reels
are permanently factory-lubricated for a long,
trouble-free service life. All of these features,
and many more, add up to make
“The Reelcraft Difference.”
Reinforced Steel
Long Life Drive Spring
The steel-stamped
guide arm is reinforced
to reduce bending
due to angular pull.
Drive mechanism is enclosed
for protection against the
environment. Declutching arbor
virtually eliminates possibility
of spring damage due to reverse
winding of reel spool.
Kinkless Hose
High quality PVC hose is
specially blended for use
on reels
Sealed Connection
Points
Improved Connection
Robust Latch
Swivel and hose inlet connections seal against leaks
The elongated brass connector and proprietary adhesion
process provide a better crimp
to the hose.
Wide profile combined with
special spring assures maximum service life.
Adjustable Guide Arm
Multiple guide arm
positions provide
versatile uses and easier
field adjustment
Stress-free Swivel
Our full-flow design combines
the highest grade seal design with
supporting bearing surfaces to
insure the longest possible life.
Structural Strength
Welded heavy gauge steel
frame includes dramatically
flanged edges and stiffening
ribs for lighter weight, yet
stronger components for ease
of handling and installation.
Trouble-Free
Performance
Fewer components
increase the service life
of the reel and improve
performance
Corrosion-Resistant
Steel components are
individually powder coated to
virtually eliminate corrosion.
Easy to Mount
Attaches to most structurally sound
surfaces. Edges are curved for safety.
Long Service Life
Finish with Quality
Field-proven swivel assures long
service life.
Built better to
perform better
To place an order, please advise:
1.
2. 3. 4. 5. Model number.
Product to be handled such
as air, oil, water, etc.
Maximum operating pressure.
Maximum operating temperature.
Hose inside and outside
diameters and length.
COPYRIGHT NOTICE
All rights reserved. No part of the material protected by this copyright may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying, recording,
broadcasting or by any other information storage and retrieval
Shown: 7850 OLP118
Our components undergo a special
five-stage cleaning process and are individually powder-coated for the highest
quality paint adhesion. Excess powder is
reclaimed to be environmentally friendly.
6. Installation height, especially
if more than 5 meters.
7. Desired guide arm position by adding one of the suffixes to the model
number. Example: 5635 OLP118SW
for side wind. Refer to the guide
arm chart for guide arm suffix
codes.
Additional Considerations:
system without written permission from Reelcraft Industries, Inc.
Reelcraft, Work Smarter, Nordic, Hose Boss, Safe-T-Reel, Better
by Design, Built Better to Perform Better and Rely on Reelcraft are
the trademarks and service marks of Reelcraft Industries, Inc. registered in the United States and/or other jurisdictions. You shall
not display, disparage, dilute or taint our trademarks and service
marks, or use our marks in such a way that would misrepresent
the identity of the owner.
All other trademarks, service marks or registered trademarks
appearing on these pages are the trademarks or service marks of
A flexible connection between the reel
and the source of supply is required to
prevent possible misalignment and
binding. Non-flexible connections will
void the warranty. The pressure rating of
inlet hose must be equal or greater than
the rating of the reel.
+44 (0) 1536 406999
Accessories
Reels ordered with hose and bumper
are assembled complete and ready to
install. Order bumpers separately for
reels without hoses.
Additional questions? Please visit our
website or call for assistance. For more
than 40 years, our specialty is offering
hose handling solutions.
their respective owners. Super Swivel, Full Circle swivel, Viton,
Quiet Speed, Buna, Push Lok, Stubby and Stubby II are not
owned by Reelcraft Industries, Inc.
3
Medium Duty Spring Retractable Reels
Series RT / LC - 6, 10 & 13mm I.D.
Series RT and LC are an economical choice for a medium duty,
spring driven hose reel for applications that are less demanding, yet
require a product that can withstand industrial and commercial use.
The Series RT includes a composite spool and spring case that
protects the industrial-grade drive spring from the environment.
The Series LC includes heavy-gauge, individually powder-coated
steel components.
RT650 OLP
Pressure
Hose
Hose
Pressure
Model
w/o Hose
I.D.
Length
w/ Hose
w/o Hose
bar
bar
mm in mtr ft
Steel Spool Low Pressure Air/Water Reels Maximum Temperature 65 °C
LC670 OLP70
21
LC607 OLP70
21
10 3/8 21 70
LC870 OLP70
21
LC807 OLP70
21
13 1/2 21 70
Composite Spool Low Pressure Air/Water Reels Maximum Temperature 65 °C
RT435 OLP
21
RT403 OLP
21
6 1/4 11 35
RT450 OLP
21
RT405 OLP
21
6 1/4 15 50
RT635 OLP
21
RT603 OLP
21
10 3/8 11 35
RT650 OLP
21
RT605 OLP
21
10 3/8 15 50
RT835 OLP
21
RT803 OLP
21
13 1/2 11 35
RT850 OLP
21
RT805 OLP
21
13 1/2 15 50
Composite Spool Medium Pressure Oil Reels Maximum Temperature 65 °C
RT635 OMP
69
RT603 OMP
69
10 3/8 11 35
RT835 OMP
69
RT803 OMP
69
13 1/2 11 35
Composite Spool High Pressure Grease Reels Maximum Temperature 65 °C
RT435 OHP
345
RT403 OHP
345
6 1/4 11 35
RT635 OHP
331
RT603 OHP
345
10 3/8 11 35
Model
w/ Hose
LC670 OLP70
Shipping
(M)NPTF
(F)NPTF
Dimensions (mm)
Weight
Hose Outlet Reel Inlet
in
in
kg*
Length Width Height
1/4 BSPT
1/2 BSPT
1/4 BSPT
1/2 BSPT
492
492
206
206
521
521
20
22
1/4
1/4
1/4
1/4
1/2
1/2
3/8
3/8
3/8
1/2
1/2
1/2
419
419
419
419
419
419
146
146
146
159
159
197
454
454
454
454
454
454
10
11
10
12
12
17
3/8
1/2
3/8
1/2
419
419
146
159
454
454
14
15
3/8
1/2
3/8
1/2
419
419
146
159
454
454
14
15
Additional lengths available as standard, contact manufacturer or go to www.reelcraft.com for master catalog listing. *Weight of model with hose.
Premium Duty Spring Retractable Reels
Series 4000 / 5000 / 5005 - 6, 10 & 13mm I.D.
Series 4000, 5000 and 5005 reels are durable and compact for a wide
range of applications with critical space requirements. A full flow shaft and
swivel assures maximum product delivery. The Quiet Speed latch mechanism offers quiet operation combined with latch cam technology insuring
longer latching life and trouble-free performance. The Series 5005 reel can
handle hose lengths up to 15 meters. Reels are all steel construction and
compact for different applications. The standard low pressure hose is for
air or water service only. Consult Reelcraft for other products and hoses.
Pressure
Pressure
Hose
Model
w/ Hose
w/o Hose
I.D.
w/o Hose
bar
bar
mm
in
Low Pressure Air/Water Reels Maximum Temperature 65 °C
4425 OLP118
21
4400 OLP118
35
6
1/4
4435 OLP118
21
4400 OLP118
35
6
1/4
5450 OLP118
21
5400 OLP118
35
6
1/4
4625 OLP118
21
4600 OLP118
35
10
3/8
5635 OLP118
21
5600 OLP118
35
10
3/8
5650 OLP118
21
5605 OLP118
35
10
3/8
A5825 OLP118
21
A5800 OLP118
35
13
1/2
21
A5805 OLP118
35
13
1/2
A5835 OLP118
A5850 OLP118
21
A5806 OLP118
35
13
1/2
Medium Pressure Oil Reels Maximum Temperature 99 °C
5435 OMP118
190
5400 OMP118
207
6
1/4
5630 OMP118
179
5600 OMP118
207
10
3/8
A5835 OMP118
224
A5805 OMP118
224
13
1/2
High Pressure Grease Reels Maximum Temperature 99 °C
5430 OHP118
345
5400 OHP118
345
6
1/4
5625 OHP118
331
5600 OHP118
345
10
3/8
Model
w/ Hose
Hose
Length
mtr
ft
4625 OLP118
A5850 OLP118
(M)NPTF (F)NPTF
Dimensions (mm)
in
in
Length Width Height
Shipping
Weight
kg*
8
11
15
8
11
15
8
11
15
25
35
50
25
35
50
25
35
50
1/4
1/4
1/4
1/4
1/4
1/4
1/2
1/2
1/2
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
321
321
343
321
343
419
343
419
419
137
137
152
137
152
152
152
152
178
327
327
368
327
368
445
368
445
445
9
9
12
9
11
16
12
18
19
11
9
11
35
30
35
1/4
3/8
1/2
3/8
3/8
3/8
343
343
419
152
152
152
368
368
445
14
14
19
9
8
30
25
1/4
1/4
1/4
1/4
419
419
152
152
368
368
14
15
*Weight of model with hose.
Models listed with an icon are planned stock and should be
able to ship same day or next day.
4
+44 (0) 1536 406999
Heavy Industrial Spring Retractable Reels
Series 7000 - 10, 13 & 19mm I.D.
The Series 7000 base and guide arms are formed from high-grade steel and
engineered with structural forms and gussets to yield the greatest amount of
strength. The Series 7000 reels incorporate all steel construction and a baked-on
powder coat finish to produce a rugged corrosion resistant product suitable for a
wide variety of heavy duty applications.
Pressure
Pressure
Hose
Model
w/ Hose
w/o Hose
I.D.
w/o Hose
bar
bar
mm in
7650 OLP118
21
7600 OLP118
35
10 3/8
7670 OLP118
21
7600 OLP118
35
10 3/8
7850 OLP118
21
7800 OLP118
35
13 1/2
7925 OLP118
17
7900 OLP118
35
19 3/4
————— ——-- 7600 OMP55-118
224
10 3/8
7850 OMP118
224
7800 OMP118
224
13 1/2
7650 OHP118
331
7600 OHP118
345
10 3/8
Model
w/ Hose
Hose
Length
mtr ft
7850 OLP118
(M)NPTF
(F)NPTF
Shipping
Dimensions (mm)
Weight
in
in
kg*
Length Width
Height
15
21
15
8
50
70
50
25
1/4
1/4
3/8
3/4 BSPT
1/2
1/2
1/2
3/4 BSPT
483
483
483
483
146
146
146
146
514
514
514
514
20
21
21
21
18
15
60
50
1/2
3/8
1/2
483
483
146
146
514
514
19
26
15
50
1/4
1/2
483
257
514
27
Mounts to floor, wall, ceiling or truck. *Weight of model with hose.
Heavy Industrial Dual Pedestal Reels
Series DP7000 / 80000 - 6, 10, 13 & 19mm I.D.
Reelcraft’s new Series DP7000 features our patented interlocking
base design, which makes the base assembly especially strong
and resistant to vibration. Independent testing has proven these
reels to stand up to heavy vibration, making them ideal for truck
mounted applications. The base and guide arm on
DP7850 OLP118
all dual pedestal reels is structurally reinforced.
Pressure
Pressure
Hose
Model
w/ Hose
w/o Hose
I.D.
w/o Hose
bar
bar
mm in
DP7450 OLP118
21
DP7400 OLP118
35
6
1/4
DP7650 OLP118
21
DP7600 OLP118
35
10 3/8
81100 OLP118
21
81000 OLP118
35
10 3/8
DP7850 OLP118
21
DP7800 OLP118
35
13 1/2
82075 OLP118
21
82000 OLP118
35
13 1/2
82100 OLP118
21
82000 OLP118
35
13 1/2
83050 OLP118
17
83000 OLP118
35
19 3/4
D83075 OLP118
17
D83000 OLP118
35
19 3/4
D84050 OLP118
17
D84000 OLP118
35
25
1
DP7650 OMP118
179 DP7600 OMP118
224
10 3/8
DP7850 OMP118
224 DP7800 OMP118
224
13 1/2
82075 OMP118
138 82000 OMP118
138
13 1/2
83050 OMP118
86
83000 OMP118
104
19 3/4
DP7450 OHP118
345 DP7400 OHP118
345
6
1/4
DP7650 OHP118
331 DP7600 OHP118
345
10 3/8
81075 OHP118
331 81000 OHP118
345
10 3/8
81100 OHP118
331 81000 OHP118
345
10 3/8
Model
w/ Hose
Hose
Length
mtr
ft
82100 OLP118
(M)NPTF (F)NPTF
Shipping
Dimensions (mm)
Weight
in
in
kg*
Length Width Height
15
15
30
15
22
30
15
22
15
50
50
100
50
75
100
50
75
50
1/4
1/4
3/8
3/8
1/2
1/2
3/4 BSPT
3/4 BSPT
3/4 BSPT
1/2
1/2
1/2
1/2
1/2
1/2
3/4 BSPT
3/4 BSPT
1 BSPT
419
419
610
419
610
610
610
610
610
203
203
257
229
257
257
257
362
387
432
432
645
432
645
645
645
645
645
21
23
37
24
39
43
40
46
47
15
15
22
15
50
50
75
50
3/8
1/2
1/2
3/4 BSPT
1/2
1/2
1/2
3/4 BSPT
419
419
610
610
203
229
257
257
432
432
645
645
25
29
46
44
15
15
22
30
50
50
75
100
1/4
1/4
3/8
3/8
1/2
1/2
1/2
1/2
419
419
610
610
203
203
257
146
432
432
645
645
27
29
50
58
Accessories
Reels ordered with hose and bumper are assembled complete and ready to install.
Order bumpers separately for reels without hoses. Additional questions? Please
visit our website or call for assistance. For more than 40 years, our specialty is
offering hose handling solutions.
Hose Bumper
2-HR1004-3
Air & Water Hose Assembly
601022-50
+44 (0) 1536 406999
5
Ultimate Duty / Floor / Truck Mount
Spring Retractable Reels
D9350 OLPBW118
Series D9000 - 13, 19 & 25mm I.D.
Series D9000 reels offer the greatest amount of stability for high volume air or water.
The durable baked-on powder coat finish provides a high quality ultra violet radiation
(sunlight), weather and chip resistant finish that will stay bright through years of use.
Pressure
Pressure Hose
Hose
(M)BSPT (F)BSPT
Shipping
Dimensions (mm)
Model
w/ Hose
w/o Hose
I.D.
Length Hose Outlet Reel Inlet
Weight
w/o Hose
bar
bar
mm in mtr ft
in
in
kg*
Length Width Height
D9350 OLPBW118
17
D9300 OLPBW118
35
19 3/4 15 50
3/4
3/4
667
305
670
64
D9399 OLPBW118
17
D9305 OLPBW118
35
19 3/4 30 100
3/4
3/4
667
340
670
65
D9450 OLPBW118
17
D9400 OLPBW118
35
25 1
15 50
3/4
1
667
305
670
71
D9350 OMPBW118
86
D9300 OMPBW118
207
19 3/4 15 50
3/4
3/4
667
305
670
64
D9175 OHPBW118 276 D9100 OHPBW118
345
10 3/8 23 75
3/8
1/2
667
305
670
63
Model
w/ Hose
Contact manufacturer or go to www.reelcraft.com for high pressure models. *Weight of model with hose.
Spring Retractable Low Profile Reels
SD13050 OLP118
Series SD10000 - 19 & 25mm I.D.
Reelcraft new Series SD10000 hose reels are designed to facilitate longer lengths of
larger diameter hose. The Series SD10000 features a high quality external drive spring
and a heavy gauge all-bolted together frame. This is the most compact reel in its class,
making it ideal for mounting in truck cabinets or other areas where space is limited.
Pressure
Pressure
Hose
Hose
(M)BSPT (F)BSPT
Shipping
Dimensions (mm)
Model
w/ Hose
w/o Hose
I.D.
Weight
w/o Hose
bar
bar
mm in mtr ft
in
in
kg*
Length Width Height
SD13050 OLP118
21
SD13000 OLP118
35
19 3/4 15 50
3/4
1
486
476
464
43
SD14035 OLP118
21
SD14000 OLP118
35
25 1
11 35
3/4
1
486
476
464
46
SD14050 OLP118
21
SD14005 OLP118
35
25 1
15 50
3/4
1
486
527
464
57
SD13050 OMP118
86
SD13000 OMP118
207
19 3/4 15 50
3/4
1
486
478
464
43
Model
w/ Hose
Fuel Delivery Reels
Series F7000, FD9000, F80000, FD80000 - 19 & 25mm I.D.
Reelcraft’s spring retractable reels, equipped with Viton® seals, are ideal for
delivering fuel. The reels incorporate metal forms to insure the greatest possible
strength and function equally well in both mobile and permanent mount
applications. These rugged, corrosion-resistant reels are suitable for a wide
variety of applications. Series FD80000 reels are also supplied with our new
ball-bearing style swivel.
Model
w/ Hose
F7925 OLP118
F83050 OLP118
FSD13050 OLP118
FD9350 OLP118
FD83075 OLP118
FD84050 OLP118
FSD14050 OLP118
FD9450 OLP118
——————
Pressure
w/ Hose
bar
10
10
10
10
10
10
10
10
——
Model
w/o Hose
F7900 OLP118
F83000 OLP118
FSD13000 OLP118
FD9300 OLPBW118
FD83000 OLP118
FD84000 OLP118
FSD14000 OLP118
FD9400 OLPBW118
FF9600 OLPBW118
Pressure
w/o Hose
bar
35
35
35
35
35
35
35
35
41
FD83075 OLP118
Hose
Hose
(M)BSPT
(F)BSPT
Shipping
Dimensions (mm)
I.D.
Weight
mm in mtr ft
in
in
kg*
Length Width Height
19 3/4 8 25
3/4
3/4
483
146
514
21
19 3/4 15 50
3/4
3/4
610
257
645
40
19 3/4 15 50
3/4
1
486
478
464
50
19 3/4 15 50
3/4
3/4
613
305
670
64
19 3/4 22 75
3/4
3/4
610
362
645
52
25 1
15 50
1
1
610
387
645
52
25 1
15 50
1
1
486
527
464
58
25 1
15 50
1
1
613
305
670
71
38 11/2 15 50
11/2
11/2
610
362
645
61
Maximum temperature 60 °C. *Weight of model with hose.
6
+44 (0) 1536 406999
Grounding Reels
G 3050 Y
15m Cable
Series G
Static discharge reels are used to ground equipment operating in hazardous atmospheres. When properly clamped to ground, the static discharge reel dissipates static
electrical buildup, reduces chances of sparking and the potential for explosion.
Model
G3050
G3050 N
G3050 Y
G3100 N
Cable Length
m
15
15
15
30
ft
50
50
50
100
Clamp Rating
100 AMP
100 AMP
100 AMP
100 AMP
G 3050
15m Cable
Shipping
Weight
kg*
5
5
5
7
Dimensions (mm)
Description
Length
219
219
219
235
Single 7 x 7 strand steel cable
Nylon covered cable
Steel cable splits in 2 @ 4.5m
Nylon covered cable
Width
85
85
85
110
Height
224
224
224
248
Light Duty Hand Crank Hose Reels
Series C - 10 & 13mm I.D.
Reelcraft’s Series C hose reels are designed for lighter-duty
applications that require longer lengths of hose. Series C hand
crank reels include a balanced brass sivel and brass inlet.
Hose
Model
I.D.
w/o Hose
mm
in
Low Pressure Air/Water Reels
CU6050LN
10
3/8
CU6100LN
10
3/8
CT6050LN
10
3/8
CT6100LN
10
3/8
CU8050LN
13
1/2
CU8100LN
13
1/2
CT8050LN
13
1/2
CT8100LN
13
1/2
Hose
(M)NPTF
Pressure
Length
Reel Outlet
mtr
ft
bar
in
Maximum Temperature 65 °C
15
50
21
3/8
30
100
21
3/8
15
50
21
1/2
30
100
21
1/2
15
50
21
1/2
30
100
21
1/2
15
50
21
1/2
30
100
21
1/2
CU6100LN
CT6100HN
(F)NPTF
Reel Inlet
in
Length
Width
Height
Shipping
Weight
kg*
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
279
279
337
337
337
337
337
337
425
528
391
494
425
528
391
494
292
292
397
397
363
363
397
397
5
7
6
7.5
6
9
6
7.5
Dimensions (mm)
Hose not included. Hose assemblies will be quoted upon request.
Hand Crank / Motor Driven Reels
H18000
Series H / 30000 - 13, 19 & 25mm I.D.
The Series 30000 reel features vibration-proof, self-locking
fasteners to ensure assembly integrity. The Series H is an
economical reel designed for medium duty applications
requiring long lengths of hose.
Hose
Hose
(F)NPTF
Pressure
I.D.
Length
Reel Outlet
mm
in
mtr
ft
bar
in
H18000
13
1/2
61
200
69
1/2
H19000
13
1/2
27
90
69
3/4
H18000 M
13
1/2
61
200
207
1/2
H19000 M
19
3/4
27
90
207
3/4
H16000 H
10
3/8
76
250
345
3/8
Model
w/o Hose
Model
(refer to chart at right)
□A32106 M□□□118
□A32112 M□□□118
□A32118 M□□□118
□A32122 M□□□118
□A32128 M□□□118
□A33106 M□□□118
□A33112 M□□□118
□A33118 M□□□118
□A33122 M□□□118
□A33128 M□□□118
□B37118 L□□□118
□H37118 M□□□118
Hose
I.D.
mm in
13 1/2
13 1/2
13 1/2
13 1/2
13 1/2
19 3/4
19 3/4
19 3/4
19 3/4
19 3/4
35 1
25 1
(F)NPTF
Reel Inlet
in
Length
Width
Height
Shipping
Weight
kg*
1/2
3/4
508
508
464
464
483
483
15
15
1/2
3/4
508
508
464
464
483
483
15
16
3/8
508
464
483
16
Dimensions (mm)
Hose
Pressure
Dimensions (mm)
Capacity
mtr ft
bar Length Width(CA) Width(EA/AA) Height
30 100
207
451
483
783
514
61 200
207
451
635
641
514
99 325
207
451
788
794
514
122 400
207
451
889
895
514
152 500
207
451
1016
1022
514
15 50
207
451
483
483
514
30 100
207
451
635
641
514
53 175
207
451
788
794
514
69 225
207
451
889
895
514
84 275
207
451
1016
1022
514
30 100
40
451
864
787
514
30 100
207
451
864
787
514
CA33112 M118
shown with
optional cart
(600965)
Series 30000 Part Number Options
A32106 M
118
C = Hand Crank
B = Bevel Crank
H = Hydraulic Motor
E = 12 V DC Electric Motor = 12D
E = 24 V DC Electric Motor = 24D
E = 115 V AC Electric Motor = 10A
A = 1½ HP Air, Pneumatic Motor = 4A
A = 4 HP Air, Pneumatic Motor = 6A
Explosion proof electric motor = X
Note: Hose not included. Many more reel models available in addition to chart. Please call manufacturer for details on models not listed.
+44 (0) 1536 406999
7
Pressure Wash Reels
CM6050HN
Series 30000 / H18006 / PW - 10mm I.D.
Compact design and quality steel construction are incorporated into
Reelcraft’s newest line of pressure wash reels. The pressure wash
reels are able to carry 100 to 300 feet of hose and are complete
with a high pressure swivel for maximum product delivery.
Hose
Hose
I.D.
Capacity
mm
in
mtr
ft
Hand Crank Reels Maximum Temperature 200 °C
CT6050HN*
10
3/8
15
50
CT6100HN*
10
3/8
30
100
CM6050HN*
10
3/8
15
50
CM6100HN*
10
3/8
30
100
H18006 M
10
3/8
30
100
CA38106 M118
10
3/8
43
140
CA38112 M118
10
3/8
91
300
Spring Driven Reels Maximum Temperature 200 °C
PW7600 OHP118
10
3/8
15
50
PW7650 OHP118**
10
3/8
15
50
PW81000 OHP118
10
3/8
30
100
Model
w/o Hose
PW7650 OHP118
bar
(F)NPTF
Reel Outlet
in
(F)NPTF
Reel Inlet
in
Length
Width
Height
Shipping
Weight
kg*
345
345
345
345
345
345
345
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2 (M)
1/2 (M)
1/2
1/2
1/2
337
337
337
337
425
425
425
391
494
363
465
349
483
635
397
397
397
397
511
514
514
6
7.5
6.5
8
14
19
21
345
331
345
1/2
1/4
3/8
1/2
1/2
1/2
483
483
610
178
178
267
514
514
645
20
27
39
Pressure
Dimensions (mm)
*Maximum temperature 99 °C **Hose included with this model; maximum temperature 100 °C
Corrosion Resistant Reels
Stainless Steel Series - 10, 13, 19 & 25mm I.D.
Stainless steel hose reels are ideal for food processing, pre-rinse, wash down, chemical transfer and
industrial solvent handling. Swivels include Viton® O-rings. Hose and bumper not included.
Model
w/out Hose
LC607 OLS-S70
LC807 OLS-S70
7600 OMS55
7800 OLS
7800 OMS
81000 OLS
82000 OLS
82000 OMS
83000 OLS70
83000 OMS70
D83000 OLS70
D84000 OLS70
HS18000 M
HS28000 M
HS19000 M
HS29000 M
HS37000 L70
Hose
I.D.
mm in
10 3/8
13 1/2
10 3/8
13 1/2
13 1/2
10 3/8
13 1/2
13 1/2
19 3/4
19 3/4
19 3/4
25
1
13 1/2
13 1/2
19 3/4
19 3/4
25
1
Hose
(F)NPTF
Pressure
Length
Reel Outlet
mtr
ft
bar
pulg
21
70
21
3/8 BSPT
21
70
21
1/2 BSPT
20
66
207
3/8
15
50
35
1/2
15
50
207
1/2
30 100
35
3/8
30 100
35
1/2
23
75
103
1/2
15
50
35
3/4 BSPT
15
50
86
3/4 BSPT
23
75
35
3/4 BSPT
15
50
35
1 BSPT
61 200
207
1/2
91 300
207
1/2
23
75
207
3/4 BSPT
38 125
207
3/4 BSPT
30 100
35
1 BSPT
(F)NPTF
Shipping
Dimensions (mm)
Reel Inlet
Weight
pulg
kg
Length Width Height
3/8 BSPT 492
206
521
16
1/2 BSPT 492
206
521
16
3/8
483
146
514
19
LC607 OLS-S70
1/2
483
146
514
19
1/2
483
146
514
20
3/8
610
257
645
37
1/2
610
257
645
37
1/2
610
257
645
38
3/4 BSPT 610
257
645
37
3/4 BSPT 610
257
645
38
3/4 BSPT 610
362
645
38
1 BSPT
610
387
645
42
1/2
508
464
483
16
1/2
508
464
483
16
3/4 BSPT 508
464
483
17
3/4 BSPT 508
464
483
16
HS18000 M
1 BSPT
534
800
572
21
Air / Water / Chemical Delivery Reels
SG Series - 10 & 13mm I.D.
The SG Series is economical, lightweight and easy to handle. This reel is made of corrosion
proof, tough polypropylene and extensive tests have shown it to be highly resistant to the
vast majority of acids, alkalis and UV Rays. Wall or floor mount. Hose included.
Hose
Hose
(M)NPTF
(F)NPTF
Shipping
Pressure
Dimensions (mm)
I.D.
Length
Weight
mm in mtr ft
bar
in
in
kg
Length Width Height
Air* & Water* Hose Reels Working Temperature 65 °C
SGA3665 OLP
10 3/8 20 65
16
3/8
3/8
489
232
492
11
SGA3850 OLP
13 1/2 15 50
16
1/2
1/2
489
232
492
10
Hot Water Wash Reel Working temperature 85 °C. **Maximum working pressure at 30 °C.
SHA3850 OLP
13 1/2 15 50
17**
1/2
1/2
489
232
492
10
Model
w/ Hose
*Air hose can be used for water on these models.
SGA3665 OLP
8
+44 (0) 1536 406999
Heavy Duty Power Cord Reels
Series 4000 / 5000 / 7000
Reelcraft’s Series 4000, 5000 and 7000 power cord reels are easy to mount and
structurally strong. The reels have a robotically welded heavy gauge steel frame that
attaches to most structurally sound surfaces.
Reel Capabilities
Model
L 4000
L 4100
L 4500
L 5000
L 5400
L 5500
L 5700
L 7000
Accessory
Reel without cord
Reel without cord
Reel without cord
Reel without cord
Reel without cord
Reel without cord
Reel without cord
Reel without cord
Length
(mtr)
15
12
14
11
11
15
15
11
# Cond
mm²
3
4
3
3
3
3
3
4
1.33
1.33
3.32
5.27
3.32
3.32
5.27
13.3
L 5700
Dimensions (mm)
Type
Reference
SJEOOW
SJEOOW
SJEOOW
SO
SJEOOW
SEOOW
SEOOW
SOOW
Length
Width
Height
321
321
321
343
343
419
419
483
239
239
239
267
267
267
318
371
337
337
337
368
368
445
445
530
Volts
Amps
Shipping
Wt. (kg)
220
220
220
220
220
220
220
220
6.5
6.5
10
16
6.5
10
16
45
10
10
10
13
11
16
17
19
For indoor use only.
Gas Welding Reels
Series TW & BA - 6 & 10mm I.D.
Series TW has an independent dual swivel body manufactured from aluminum
and hard coated for wear resistance. This unique design assures positive
separation of gases. Double-sealed, special molded O-rings prevent leakage.
Hose
Hose
Hose
Pressure
I.D.
Length
Outlet
mm in mtr ft
bar
in
Oxygen / Acetylene Hose Reels Maximum Temperature 65 °C
TW5425 OLP118
TW5400 OLPT118
6
1/4
8
25
14
9/16-18(F)
TW7450 OLP118
TW7400 OLPT118
6
1/4 15 50
14
9/16-18(F)
TW7460 OLP118
TW7400 OLPT118
6
1/4 18 60
14
9/16-18(F)
Welding Gas (T-Grade) Hose Reels Maximum Temperature 65 °C
TW5425 OLPT118
TW5400 OLPT118
6
1/4
8
25
14
9/16-18(F)
TW7450 OLPT118
TW7400 OLPT118
6
1/4 15 50
14
9/16-18(F)
TW7460 OLPT118
TW7400 OLPT118
6
1/4 18 60
14
9/16-18(F)
TW84100 OLPT118 TW84000 OLPT118
6
1/4 30 100
14
9/16-18(M)
TW86075 OLPT118 TW86000 OLPT118
10 3/8 23 75
14
9/16-18(M)
——————
BA36106 L118
6
1/4 38 125
14
9/16-18(M)
——————
BA36112 L118
6
1/4 76 250
14
9/16-18(M)
Model
w/ Hose
Model
w/o Hose
TW7450 OLP118
Reel
Inlet
in
Shipping
Weight
kg*
Length Width Height
Dimensions (mm)
1/4 (F)NPT
1/4 (F)NPT
1/4 (F)NPT
349
483
483
152
178
178
368
514
514
12
23
25
1/4 (F)NPT
1/4 (F)NPT
1/4 (F)NPT
9/16-18(M)
9/16-18(M)
9/16-18(M)
9/16-18(M)
349
483
483
610
610
727
727
152
178
178
330
330
397
550
368
514
514
645
645
514
514
12
23
25
46
45
23
26
Tool Balancers
Heavy Duty
TBL 10
Series TB / TBL
Tool balancers make tools nearly
weightless, reducing operator
fatigue. Reelcraft’s Series TB and
TBL also improve safety and
ergonomics and helps prevent
tools from being accidentally
dropped, reducing tool damage.
Medium
Duty TB
Bright zinc plated steel safety
latch for tool attachment and
other uses. Measures 60.33 mm
long. Included with each model.
Model
TB 01
TB 03
TB 05
Model
TB 10
TB 12
TB 15
TB 23
TBL 10
TBL 12
TBL 15
TBL 23
Min-Max Cable Ratchet Wgt.
Load (kgs) Length Lock (kg)
0 - 0.7
1.8 m
NO
0.45
0.7 - 1.4
1.8 m
NO
0.45
1.4 - 2.3
1.8 m
NO
0.68
Min-Max
Load (kgs)
2.3 - 4.5
3.6 - 5.4
4.5 - 6.8
7.3 - 10.4
2.3 - 4.5
3.6 - 5.4
4.5 - 6.8
7.3 - 10.4
Cable Ratchet Wgt.
Lgth. Lock (kg)
2.4 m
NO
4.08
2.4 m
NO
4.54
2.4 m
NO
4.54
2.4 m
NO
4.54
2.4 m YES
4.08
2.4 m YES
4.54
2.4 m YES
4.54
2.4 m YES
4.54
+44 (0) 1536 406999
9
Heavy Duty Large Frame Reels
Nordic Series - 13 to 102mm ID; lengths to 213m and more
Reelcraft’s Nordic Series reels are rugged and durable, with standard
Gear Drive
1/2” pitch chain and sprocket drive powered by AC or DC electric motor with
Available
auxillary bevel crank. Nordic reels are equipped with the standard welded frame and
heavy duty cast bevel gears for reliable performance. Designs are versatile to provide
flexibility to meet user requirements for size, capacity, rewind motor and consistency.
Representative
Model w/o Hose
BC2400-21-10-10FF
BC2400-25-12-10FF
BC2400-25-16-10FF
BC2400-25-22-10FF
BC3900-25-10-15FF
BC3900-25-14-15FF
BC3900-31-14-15FF
BC3900-31-20-15FF
BC3700-25-16-20F2
BC3700-31-18-20F2
BC3700-31-24-20F2
EP5905-39-16-25FI
EP5905-39-16-30FI
Hose
Hose
Pressure
Dimensions (mm)
I.D.
Length (ft.)
mm
in
mtr
ft
bar
Length Width* Height
25
1
18
60
69
533
508
673
25
1
41 135
69
635
559
673
25
1
58 190
69
635
660
673
25
1
81 265
69
635
813
673
38 1 1/2 12
40
21
635
508
673
38 1 1/2 20
65
21
635
610
673
38 1 1/2 40 130
21
787
610
826
38 1 1/2 58 190
21
787
762
826
51
2
15
50
21
635
660
826
51
2
29
95
21
787
711
826
51
2
38 125
21
787
864
826
64 2 1/2 27
90
21
991
737
1029
76
3
14
45
21
991
737
1029
Shipping
Weight
kg
33
34
36
39
40
42
42
44
56
56
67
110
110
Shown with
optional bevel crank
Series 3900
pp3900-31-12-15FF
Drive Type:
EP - Electric Motor, 12 V DC
explosion proof
BC - Bevel Crank (standard)
Also available, non-explosion
proof 12 or 24 V DC; explosion
proof 115 or 230 V AC, 24 V DC.
Contact manufacturer.
*For electric motor versions of the BC models, add 76mm to width shown in above chart.
Models listed with an icon are SATO reels and are available in 1 to 2 weeks based on quantity.
SATO Reels
Over 5000 readily made combinations available
Reelcraft’s satellite assemble to order (SATO) program grants our European
branch the capability to configure and assemble large frame reels for our
customers. The SATO reels utilize a bolted frame and all other standard
components of our configured reels. SATO reels are assembled on location
with components that are in stock reducing the product lead time for
configured large frame reels.
• Six head sizes (side disc diameters):
19, 21, 23, 25, 28 and 31 inch
• Five drum sizes: 8, 12, 16, 20 and 24
inch wide
• Three drum diameters: 8, 11.25 and 15
inch to suit most common hose types
Custom Built Reels
Reelcraft’s engineered products group
custom builds reels to your specifications.
Our special engineered products are developed for demanding applications in areas
such as marine, military, aviation, hydroseeding, sewer and well cleaning,
offshore oil rigs, robotic cable and much
more. We offer flexibility, competitive pricing and a lasting committment to excellence. For more than 25 years, Reelcraft’s
engineered products group has produced
custom products to meet individualized
requirements.
10
Series 2400
• A range of different drive systems
available: hand crank, bevel rewind,
electric, pneumatic and hydraulic
• Three different fluid path sizes: 1”,
ductile iron - 210 bar, 1.5” aluminium
- 50 bar and 2” aluminium - 20 bar
Reelcraft’s Capabilities
Very few size and weight constraints
We build to meet most extreme size and
weight constraints.
Special finishes/paint options
Options include CARC paint, marine grade
epoxy, liquid enamel coat paint and powder
coat paint in any color.
Various drive types
Manual crank, motorized, spring drive,
hand-over-hand and more.
No minimum quantities
Order from 1 to as many as you need.
+44 (0) 1536 406999
• Additional options include storage only
reels (no fluid path), LPG reels, Atex
certification and reels with a stainless
steel fluid path (1.5”)
Custom Reels
Built to your specs
Wide range of pressures
A wide variety of pressure ranges available
from 3.5 to 345 bar and beyond.
Unique options - Hose Boss rewind assist,
tensioning bars, multiple fluid paths, level
rewinds and much more.
Reel Accessories |
Roller Guides / Brackets / Bumpers / Hose Assemblies
Roller Hose Guide Assemblies
Accommodates
Weight
Hose O.D.
mm
kg
HR1057
16 - 23
.12
HR1059
6.4 - 15.9
.12
HR1145
16 - 23
.15
S270109
23 - 50.8
2.44
600168
23 - 35
.34
These four-way roller guide assemblies are for
use with reels on cabinet door openings and for
similar locations where sharp edges may cut or
damage the hose. The design permits pulling or
retracting hose at any angle. Model S270109 has
nylon rollers mounted on an 11 gauge steel
frame with pre-drilled mounting holes. Note: A
hose bumper should be used to prevent damage
to rollers and nozzles. See chart below.
Model
HR 1059
HR 1145
600168
A
mm
22.3
15.9
50.8
133.4
44.5
Additional Accessories
600992
600626
Dimensions
C
D
mm
mm
79.4
79.4
79.4
79.4
95.3
69.9
305
204
130
130
E
mm
42.9
42.9
54.1
127
102
F
mm
42.9
42.9
79.4
267
102
Hose Assemblies
Reel Series
340° Pivot Base
600608
B
mm
N/A
N/A
25.4
60.4
27
Aligns reel to the direction
of hose or cord run. May be
mounted with reel upright or
hanging. Weight 5kg (10 lbs).
Note: Use if hoses or cords
are pulled at more than 45°.
Wall-Mounted Universal
Swing Bracket
Part #
RT / 4000 /
5000 / 5005 / 600608
7000
80000 /
600801
30006
30012
600801-12
Bracket will pivot approximately 180°. All steel construction
with a baked on powder coat
finish. Weight 3kg.
Note: Use if hoses or cords
are pulled at more than 45°.
Note: Not for overhead
mounting.
Part
Number
Hose I.D. Length End Fittings Pressure Weight
mm in m ft in - NPTF(M)
Low Pressure Air and water - PVC Nylon Braid
S601001-35
6 1/4 11 35 1/4 x 1/4
S601013-50
10 3/8 15 50
1/4 x 1/4
bar
kg
21
1.4
21
2.8
Reel Series
Part #
S601017-50
10 3/8 15 50
1/2 x 1/4
21
2.6
S601021-50
13 1/2 15 50
1/2 x 3/8
21
4.8
RT
600992
S601022-100
13 1/2 30 100
1/2 x 1/2
21
9.1
4000 / 5000
600993
RT / 4000 /
5000 / 5005 /
7000
600626
80000 /
DP7000
600980
25 3/4 x 3/4 BSPT
17
3.5
601039-50-BSPP 19 3/4 15 50 3/4 x 3/4 BSPT
601039-25-BSPP 19 3/4
17
6.9
601039-75-BSPP 19 3/4 22 75 3/4 x 3/4 BSPT
17
8.7
601042-50-BSPP 27
17
10
1
8
15 50
1 x 1 BSPT
Note: Many more hose assemblies available in addition to chart. Please call
manufacturer for details on hoses not listed.
Adjustable Hose Bumpers
Adjustable hose bumpers are solid molded rubber assuring a long life and nonslip grip. Hose bumpers allow the desired length of
hose to be permanently stored outside the reel. Hose bumpers are included on the reels purchased with hose. Reels purchased without
hose do not include the hose bumper. When ordering, advise the part number, reel model and the hose I.D. and O.D. NOTE: To order
hose bumper with stainless steel hardware, change part number prefix from HR to HS.
For Reel Series
4000 / 5000 / RT400 / L4500
L5000 / DP
4000 / 5000 / D8000 / RT400
RT600 / 6000
5000 / 7000 / 80000 / E8000
RT800 / D80000 / DP
5000 / A5005 / 7000 / 80000
D8000 / E8000 / RT800 / DP
7000 / 8000 / D8000 / 80000
F7000 / F80000 /
TW5000 / TW7000 / TW80000
TWD80000
TW80000 / TW8000
D9000 / E9000
D9000 / E9000 / FE9000 / SD
D80000 / D8000 / D9000 /
E9000 / FD9000 / FE9000 /SD
FE9500 / FF9500
FE9600 / FF9600
Part
Number
Hose O.D. (Dia A)
mm
Hose I.D.
mm in
Dia. B-C-E
mm
Dia. D
mm
Weight
kg
1-HR1004-A
11 - 16
6
1/4
64
32
.10
1-HR1004
16 - 19
10
3/8
64
32
.11
1-HR1004-3
16 - 19
10
3/8
73
32
.10
2-HR1004-3
19 - 27
73
32
.10
3-HR1004-3
27 - 35
19
3/4
73
32
14
8-HR1004-3
13 twin
6
1/4
73
32
.10
600521
2-HR1005
3-HR1005
17 twin
19 - 27
27 - 35
10
13
19
3/8
1/2
3/4
89
89
89
51
73
73
.20
.43
.43
4-HR1005
35 - 39
25
1
89
73
.36
S600547-1
S600547-2
39 - 44
44 - 52
32
38
11/4
11/2
95
95
73
73
.31
.25
13 or 10 1/2 or 3/8
+44 (0) 1536 406999
2-HR1004-3
8-HR1004-3
4-HR1005
11
North America and
Corporate Headquarters
2842 E. Business Hwy 30
Columbia City, IN 46725
Customer Service: 855-634-9109
Ph: 800-444-3134 • Fax: 800-444-4587
Ph: 260-248-8188 • Fax: 260-248-2605
[email protected]
www.reelcraft.com
Latin America and
the Middle East
Thompson International, Inc.
P.O. Box 12958, Ft. Wayne, IN 46866
Ph: 260-489-1685 • Fax: 260-489-0203
[email protected]
www.reelcraft.com/latinamerica
Form # MCAT-001E 11/2015
reelcraft.com/europe
Pacific Rim
China
P.O. Box 53776, Clark Freeport Zone
Philippines 2023
Ph: +63 (45) 625-6624
Fax: +63 (45) 321-0643
[email protected]
www.reelcraft.com/asia
Reelcraft Changzhou Co., Ltd.
Building C, No. 229 HeHai West Road
Changzhou, Jiangsu, China 213022
Ph: +86 (519) 8512 2391 ext. 8002
Fax: +86 (519) 8512 9309
[email protected]
www.reelcraftchina.com
Europe
Unit 17 • Cronin Courtyard
Weldon South Industrial Estate
Corby • Northamptonshire NN18 8AG
United Kingdom
Ph: +44 (0) 1536 406999
Fax: +44 (0) 1536 406777
[email protected]
Australia
PO Box 6463 BC, Blacktown
NSW 2148, Australia
Ph: +61 (2) 9621 8988
Fax: +61 (2) 9621 7688
[email protected]
www.reelcraft.com

Condensed Reel Catalog

Transcription

Similar documents

Mineflex Brochure - Reel Easy

Hozelock Brand Guidelinesv4.indd

Napa Unicoil sellsheet Dealer copy.indd

GOLDENHORN 12S

UNICOIL Hose Bender Flyer

TSB 33

Ceiling exhauSt Fan - Johnson Air Products

Novaflex®

BEST VALUE DUAL WAND- MORE SUCK FOR YOUR BUCK

Frac Tank Cleanup Machines - AllExcavate Hydro Excavator