table of contents - coatingsmall.com

Transcription

TA B L E O F C O N T E N T S
To go directly to a TDS, click on the product name / application.
To return to this page, click on the LIMCO logo on any TDS.
A p p l i c a t i o n P ro c e d u re s
Standard Preparation for Plastic Parts
Standard Preparation for Steel, Aluminum & Galvanized Metals
Standard Preparation for OEM and Cured Finishes
Supreme PLUS Basecoat Blending Procedure - U.S. National Rule VOC
Supreme PLUS Basecoat Blending Procedure - Low VOC Recommendation
U n d e rc o a t s
800K 2K Primer Surfacer - Primer Surfacer Application with LH810, LH820
800K 2K Primer Surfacer - Primer Surfacer Application with LHF, LHM, LHS
800K 2K Primer Surfacer - Tinted Wet-On-Wet Sealer Application with LH810, LH820
800K 2K Primer Surfacer - Tinted Wet-On-Wet Sealer Application with LHF, LHM, LHS
846 1K Acrylic Primer - Primer Application
H1000 1K Waterborne Primer - Primer Surfacer Application
LP20 Epoxy Primer - Primer Application
LP20 Epoxy Primer - Low VOC Primer Application
LP20 Epoxy Primer - Primer Surfacer Application
LP20 Epoxy Primer - Low VOC Primer Surfacer Application
LP20 Epoxy Primer - Wet-On-Wet Sealer Application
LP20 Epoxy Primer - Low VOC Wet-On-Wet Sealer Application
LP100 Etch Primer - Primer Application
LP100 Etch Primer - Low VOC Primer Application
LP610 Low VOC Primer - Primer Surfacer Application
LP610 Low VOC Primer - Sealer Application
LP620 Low VOC Primer - Primer Surfacer Application
LP620 Low VOC Primer - Low VOC Primer Surfacer Application
LP620 Low VOC Primer - Sealer Application
LP620 Low VOC Primer - Low VOC Sealer Application
LS56 1K Sealer - Wet-On-Wet Sealer Application
LS800 2K Sealer - Wet-On-Wet Sealer Application
PS21nr 1K Gray Sealer - Wet-On-Wet Sealer Application
To p c o a t s
Limco Synthetic Enamel (Limco 1) - U.S. National Rule VOC
Limco Synthetic Enamel (Limco 1) with Catalyst - U.S. National Rule VOC
Limco Acrylic Enamel (Limco 2) - U.S. National Rule VOC
Limco Urethane (Limco 3) - U.S. National Rule VOC
Limco Low VOC Urethane (Limco 3) - 420 gms/liter (3.5 lbs/gal) VOC
Limco Basecoat (Limco 4) - U.S. National Rule VOC
Limco Basecoat (Limco 4) with hardener - U.S. National Rule VOC
Limco Direct-to-metal Light Industrial Topcoat (Limco 5) - U.S. National Rule VOC
Limco Low VOC Industrial Urethane Single Stage (Limco 7) - 420 gms/liter (3.5 lbs/gal) VOC
Supreme PLUS Acrylic 1K Single Stage - U.S. National Rule VOC
Supreme PLUS Low VOC Acrylic 1K Single Stage - 340 gms/liter (2.8 lbs/gal) VOC
US. Rev. 3/22/16
AD2503L
To p c o a t s c o n t i n u e d
Supreme PLUS Acrylic 2K Single Stage - U.S. National Rule VOC
Supreme PLUS Urethane Single Stage with LA2799 - U.S. National Rule VOC
Supreme PLUS Urethane Single Stage with LA2999 - U.S. National Rule VOC
Supreme PLUS Low VOC Urethane Single Stage with LA2799 - 340 gms/liter (2.8 lbs/gal) VOC
Supreme PLUS Basecoat - U.S. National Rule VOC
Supreme PLUS Low VOC Basecoat - 420 gms/liter (3.5 lbs/gal) VOC
Supreme PLUS 2K Direct-to-metal - U.S. National Rule VOC
Supreme PLUS 2K Direct-to-metal - 420 gms/liter (3.5 lbs/gal) VOC
C l e a rc o a t s
LC4000 Clearcoat - U.S. National Rule VOC
LC4100 High Solids Clearcoat - U.S. National Rule VOC
LC4200 Low VOC Clearcoat - 250 gms/liter (2.1 lbs/gal) VOC
LC4500 Express Clear - U.S. National Rule VOC
LC4800 Low 2.0 VOC Express Clear - 250 gms/liter (2.1 lbs/gal) VOC
Miscellaneous
892 Flex Agent
LE800 Fisheye Eliminator
LF10 Flattening Agent
A P P L I C AT I O N P R O C E D U R E S
Standard Preparation
for Plastic Parts
General
Cleaning
This system is used to repair damaged flexible or rigid plastic parts, or to refinish replacement plastic
parts.
Wash all areas to be refinished with water and a mild
detergent soap. Rinse thoroughly and let dry.
Clean all areas to be painted with plastic cleaner.
R-M 902 Plastic Prep-Cleaner, then
R-M 909 Final Wipe
Sanding
Prepare any areas that are to be painted by scuffing with a
fine scuff pad.
Scotchbrite #7447
Cleaning
Use an air blow gun to remove all traces of dust and dirt
from the cracks and surfaces of the vehicle.
R-M 902 Plastic Prep-Cleaner, then
R-M 909 Final Wipe
Clean all areas to be painted with plastic cleaner.
Do not allow plastic cleaners to dry on the surface. Apply
wet and then dry with a clean rag.
Pre-prime
For bare plastic on flexible plastic parts, apply one coat of
868, 869 or 870. Do not sand.
For bare plastic on semi-rigid or rigid parts, apply one coat
of 868, 869 or 870.
Primer Surfacer
For flexible parts, apply 2 or 3 coats of primer surfacer
mixed with flex additive over any areas that require filling.
After drying, finish sand with 240 to 320 grit dry, or 280 to
500 grit wet.
For semi-rigid or rigid parts, apply 2 or 3 coats of primer
surfacer. After drying, finish sand with 240 to 320 grit dry,
or 280 to 500 grit wet.
Sealer
US. Rev. 11/21/14
Apply 1 medium wet coat over entire part. Allow to flash
for 20 to 30 minutes. See the sealer technical reference
sheets for flexed mix ratios.
R-M 868 1K Plastic Primer
R-M 869 1K Low VOC Adhesion Promoter
R-M 870 High Solids Adhesion Promoter
for Plastics
800K 2K Primer Surfacer
846 1K Acrylic Primer
892 Flex Agent
LP20 Epoxy Primer (rigid parts only)
LP610 Low VOC Primer (rigid parts only)
LP20 Epoxy Primer (rigid parts only)
LS56 1K Sealer
LS800 2K Sealer
PS21nr 1K Gray Sealer
A P P L I C A T I O N
P R O C E D U R E S
Standard Preparation
for Plastic Parts
Topcoat
Clearcoat
All Basecoats and 1K Acrylic / Synthetic Enamel colors
maybe used on plastic parts without a flex additive. For
all other topcoats see specific technical data sheet for flex
recommendations.
All Limco Topcoats
892 Flex Agent
Apply 2 coats of clear over, Limco Basecoat colors. Limco
892 Flex Agent must be added the Limco clearcoats. See the
clearcoat's technical reference sheet for flexed mix ratios.
LC4000 Clearcoat
LC4100 High Solids Clearcoat
LC4200 Low VOC Clearcoat
LC4500 Express Clear
LC4800 Low 2.0 VOC Express Clear
892 Flex Agent
Always check local VOC laws to ensure that the use of these
Limco products is compliant in your area.
Refer to the appropriate Technical Data Sheet(s) for detailed processing information.
Materials described are for application by professional trained personnel only using proper equipment. Products may be hazardous & should be used according to label directions & technical data information. Appropriate respiratory protection should be worn at
all times while products are in use—read product label and Material Safety Data Sheet (MSDS) for specific details. Statements & methods described are based upon the latest standard of technology known to the manufacturer. Application procedures cited are
suggestions only & are not to be interpreted as warranty for events resulting from their use. Dilution ratios are intended to provide maximum performance within the typical Volatile Organic Compound (VOC) restriction for product use. Specific VOC limits need to
be referenced to verify local compliance. Altering the solvent or dilution ratio may impact VOC compliance. User is solely responsible to ensure product use and application is in accordance with all applicable regulatory, legislative, and municipal requirements.
Standard Preparation for steel,
aluminum, & galvanized metals
General
Use this procedure to prepare bare steel, aluminum, zinc coated or galvanized metals.
Cleaning
Remove all traces of oil, grease, welding residue or any
other material with wax and grease remover. Remove
any traces of rust by sanding, wire wheel, brush or
sandblasting. Remove all traces of paint stripper by
following manufacturer’s instructions.
Sanding
Steel: dry sand with 80 to 180 grit sandpaper.
203 Wax and Grease Remover, then
139 Final Wash Cleaner
Aluminum: dry sand with 120 to 180 grit sandpaper.
Zinc or galvanized metal: use coarse scuff pad. (Do not remove zinc or galvanized coating.)
Cleaning
Blow off any dust and reclean metal with 139 Final Wash
Cleaner.
Do not allow cleaner to dry on the surface. Apply wet and
then dry with a clean rag.
Notes
Prime bare metal as soon as possible to prevent further oxidation.
Always check local VOC laws to ensure that the use of these Limco products is compliant in your area.
US. Rev. 11/21/14
Standard Preparation for
OEM and cured finishes
General
Cleaning
Use this procedure to repair or refinish OEM finishes or fully cured, sound old paint work.
Wash all areas to be refinished with water and a mild
detergent soap. Rinse thoroughly and let dry.
Clean all areas to be painted with 203 Wax and Grease
Remover, then do a final wipe with 139 Final Wash
Cleaner.
Sanding
203 Wax and Grease Remover, then
Dry sand all painted areas and any body filler areas that will be primed with 240 grit sandpaper. Be
sure to only prime over sanded areas.
Sand any areas that will be topcoated directly with 400 grit or finer wet or 320 grit or finer dry.
Prepare any areas that are to be blended into by compounding and scuffing with a fine scuff pad.
Cleaning
Use an air blow gun to remove all traces of dust and dirt
from the cracks and surfaces of the vehicle.
Clean all areas to be painted with pre-paint cleaner 139
Final Wash Cleaner making sure to remove all residue. Do
not allow pre-paint cleaners to dry on the surface. Apply
wet and then dry with a clean rag.
Notes
US. Rev. 11/21/14
Supreme PLUS Basecoat
Blending Procedure
U.S. National Rule VOC
General
Preparation
Pre-prime
Supreme PLUS Basecoat U.S. National Rule VOC is based upon a modified acrylic resin system that can
be blended for the repair of original basecoat/clearcoat finishes.
Follow the appropriate procedures in the “Standard Preparation” section.
Apply 1 or 2 coats of precoat primer to all bare metal
areas. Allow sufficient flash time between coats. Do not
sand. Allow to dry for 30 minutes before applying primer
surfacer.
LP20 Epoxy Primer
LP100 Etch Primer
Primer Surfacer
Build up any damaged areas with 2 or 3 coats of primer
surfacer. After drying, sand dry with 320 grit sandpaper or
sand wet with 400 grit sandpaper.
* Dry sand only and can not be used over LP100.
H1000 1K Waterborne Primer *
LP20 Epoxy Primer
LP610 Low VOC Primer
Sealer
A sealer can improve holdout, maximize adhesion and
minimize sand scratch swelling. Apply sealer per technical
reference sheets.
LP20 Epoxy Primer
LS56 1K Sealer
LS800 2K Sealer
US. Rev. 11/21/14
P R O C E D U R E S
Blending Procedure
Blending
Procedure
Repair area should be sanded with 320-400 grit sandpaper for
topcoating with Supreme PLUS Basecoat.
Sand the rest of the panel with 800-1000 grit sandpaper.
Clean area with pre-paint cleaner.
Apply 1 coat of LA1202 mixed 1:1 to 1:3 with LR11 over the
area to be blended, let that flash for 10 minutes.
Apply color as needed to achieve proper hiding, make sure to
stay inside the area with the LA1202 mixture on it.
Blend out color as needed into LA1202 mixture.
Allow 10 minutes flash before applying first coat of clear over
entire blend area.
Apply second wet coat of clear over the entire panel.
Notes
Blending Procedure
Low VOC Recommendation
General
Preparation
Pre-prime
Supreme PLUS Basecoat Low VOC is based upon a modified acrylic resin system that can be blended for
the repair of original basecoat/clearcoat finishes.
Follow the appropriate procedures in the “Standard Preparation” section.
Apply 1 or 2 coats of precoat primer to all bare metal
areas. Allow sufficient flash time between coats. Do not
sand. Allow to dry for 30 minutes before applying primer
surfacer.
LP20 Epoxy Primer
LP100 Etch Primer
Primer Surfacer
Build up any damaged areas with 2 or 3 coats of primer
surfacer. After drying, sand dry with 320 grit sandpaper or
sand wet with 400 grit sandpaper.
* Dry sand only and can not be used over LP100
H1000 1K Waterborne Primer *
LP20 Epoxy Primer
Sealer
A sealer can improve holdout, maximize adhesion and
minimize sand scratch swelling. Apply sealer per technical
reference sheets.
LP20 Epoxy Primer
US. Rev. 11/21/14
P R O C E D U R E S
Blending Procedure
Low VOC Recommendation
Blending
Procedure
Repair area should be sanded with 320-400 grit sandpaper for
topcoating with Supreme PLUS Low VOC Basecoat.
Sand the rest of the panel with 800-1000 grit sandpaper.
Clean area with pre-paint cleaner.
909 Final Wipe (low VOC mix)
Apply 1 coat of LC4200 or LC4800 mixed 4:1:600-800%
with LR21 over the area to be blended, let that flash for 10
minutes.
Supreme PLUS Low VOC Basecoat
Apply color as needed to achieve proper hiding, make sure to
stay inside the area with the over reduced clear mixture on it.
Blend out color as needed into over reduced clear mixture.
Allow 10 minutes flash before applying first coat of clear over
entire blend area.
Apply second wet coat of clear over the entire panel.
Notes
U N D E R C O AT S
Primer Surfacer Application with LH810, LH820
Description:
Limco 800K 2K Primer Surfacer is a very fast curing, easy sanding primer, that provides good sand
scratch filling, no settling in the can, excellent adhesion and topcoat holdout.
Materials:
Primer Surfacer:
800K
Hardeners:
LH810
LH820
Flex Agent:
892
Substrate/Pretreatment:
Cleaning Sanding
Second Cleaning
Well cured old paint work
203 Wax and Grease Remover
240 - 400 grit
O.E.M. primed spare parts
240 - 400 grit
Bare steel
80 - 180 grit
Galvanized Steel
Then, pre-prime with LP20 or LP100
Coarse scuff pad
Aluminum
203 Wax and Grease Remover Then, pre-prime with LP20 or LP100
120 - 180 grit
Fiberglass plastic parts
(without gelcoat)
R-M 902 Plastic Prep-Cleaner
220 grit
NOTES: On Galvanized Steel and Aluminum, make sure sanding is not so vigorous that it removes the galvanized coating.
With the second cleaning, make sure all residue is removed. Pay special attention when cleaning Galvanized Steel and
Aluminum.
Topcoats:
Limco Synthetic Enamel (Limco 1)
Limco Acrylic Enamel (Limco 2)
Limco Urethane (Limco 3)
Limco Basecoat (Limco 4)
Supreme PLUS Acrylic 1K Single Stage
Supreme PLUS Urethane Single Stage
Remarks:
US. Rev. 11/21/14
Always check local VOC laws to ensure that the use of these Limco products is compliant in your
area.
T E C H N I C A L
D A T A
Primer Surfacer Application with LH810, LH820
Flexed
S
Mixing ratio:
4:1
4:1:1
Primer
4 parts 800K
4 parts 800K
Hardener
1 part LH810 or LH820
Flex Agent
—
1 part 892
Potlife at 68°F/20°C
1.5 hours
1.5 hours
Spray viscosity Ford #4
@ 68°F/20°C
18 - 21 seconds
18 - 21 seconds
Gravity gun nozzle HVLP
1.5 - 1.7 mm
1.5 - 1.7 mm
Spray pressure HVLP at the cap
8 - 10 psi
8 - 10 psi
Application
2 - 3 medium wet coats
Flash-off time @ 68°F/20°C
5 minutes between coats
Film build
2.0 - 3.0 mils
2.0 - 3.0 mils
Coverage
532 sq. ft./gal @ 1.0 mil
68°F/20°C
60 minutes with LH810;
1.5 - 2 hours with LH820
90 minutes with LH810;
2.5 hours with LH820
140°F/60°C
20 minutes
20 minutes
Infra red short wave
N/A
N/A
Infra red medium wave
N/A
N/A
Wet by Hand
320 - 400 grit
320 - 400 grit
Dry by Hand
400 grit
400 grit
Dry by Machine
320 - 400 grit
320 - 400 grit
VOC as packaged
577 gms/liter (4.78 lbs/gal)
VOC as applied
Drying:
Sanding:
Comments
U N D E R C O AT S
Primer Surfacer Application with LHF, LHM, LHS
Description:
Limco 800K 2K Primer Surfacer is a very fast curing, easy sanding primer, that provides good sand
scratch filling, no settling in the can, excellent adhesion and topcoat holdout.
Materials:
Primer Surfacer:
800K
Hardeners:
LHF
LHM
LHS
Reducers:
LR10
LR11
LR12
LR13
LR15
Flex Agent:
892
Cleaning Sanding
Second Cleaning
240 - 400 grit
240 - 400 grit
Bare steel
80 - 180 grit
Galvanized Steel
Coarse scuff pad
Aluminum
120 - 180 grit
(without gelcoat)
220 grit
Aluminum.
Topcoats:
Remarks:
US. Rev. 11/21/14
area.
T E C H N I C A L
D A T A
Primer Surfacer Application with LHF, LHM, LHS
Flexed
S
Mixing ratio:
8:1:1
8:2:1:1
Primer
8 parts 800K
8 parts 800K
Hardener
1 part LHF, LHM or LHS
2 parts LHF, LHM or LHS
Reducer
1 part LR10, LR11, LR12, LR13 or LR15
Flex Agent
—
1 part 892
30 minutes
30 minutes
@ 68°F/20°C
18 - 21 seconds
18 - 21 seconds
1.5 - 1.7 mm
1.5 - 1.7 mm
8 - 10 psi
8 - 10 psi
Application
Film build
2.0 - 3.0 mils
2.0 - 3.0 mils
Coverage
308 sq. ft./gal @ 2.0 mils
68°F/20°C
60 minutes with LHF;
1.5 - 2 hours with LHS
90 minutes with LHF;
2.5 hours with LHS
140°F/60°C
20 minutes
20 minutes
N/A
N/A
N/A
N/A
Wet by Hand
320 - 400 grit
320 - 400 grit
Dry by Hand
400 grit
400 grit
Dry by Machine
320 - 400 grit
320 - 400 grit
VOC as packaged
VOC as applied
Drying:
Sanding:
Comments
U N D E R C O AT S
Tinted Wet-On-Wet Sealer Application
with LH810, LH820
Description:
Limco 800K 2K as a tinted wet-on-wet sealer is a very fast drying sealer that provides excellent
adhesion with good topcoat color holdout.
Materials:
Primer Sealer:
800K
Limco Bases *:
LB Bases
Quick Mix Colors: Q Bases
Hardeners:
LH810
LH820
Reducers:
LR21
LR25
Flex Agent:
892
Cleaning
Sanding
Second Cleaning
240 - 400 grit
240 - 400 grit
Bare steel
80 - 180 grit
Galvanized Steel
Coarse scuff pad
Aluminum
120 - 180 grit
(without gelcoat)
220 grit
Aluminum.
Topcoats:
Remarks:
area.
* LA bases cannot be used to tint 800K due to VOC compliance issues.
US. Rev. 11/21/14
T E C H N I C A L
D A T A
Tinted Wet-On-Wet Sealer Application with LH810, LH820
Flexed
S
Mixing ratio:
Step 1 - 1:1
Step 1 - 1:1
Primer
1 part 800K
1 part 800K
Base
1 part LB Base
(without mixing clear)
1 part LB Base
Step 2 - 4:1:1
4 parts 800K / LB Base mixture
Step 2 - 4:1:1:1
Hardener
Reducer
1 part LR21 or LR25
1 part LR21 or LR25
Flex Agent
—
1 part 892
8 hours
8 hours
@ 68°F/20°C
13 - 15 seconds
13 - 15 seconds
1.5 - 1.7 mm
1.5 - 1.7 mm
8 - 10 psi
8 - 10 psi
Application
1 medium wet coat
1 medium wet coat
15 - 30 minutes
15 - 30 minutes
Film build
0.5 - 1.5 mils
0.5 - 1.5 mils
Coverage
68°F/20°C
15 - 30 minutes
15 - 30 minutes
140°F/60°C
N/A
N/A
N/A
N/A
N/A
N/A
Wet by Hand
N/A
N/A
Dry by Hand
N/A
N/A
Dry by Machine
N/A
N/A
VOC as packaged
VOC as applied
Drying:
Sanding:
Comments
U N D E R C O AT S
Tinted Wet-On-Wet Sealer Application
with LHF, LHM, LHS
Description:
Limco 800K 2K as a tinted wet-on-wet sealer is a very fast drying sealer that provides excellent
adhesion with good topcoat color holdout.
Materials:
Primer Sealer:
800K
Limco Bases *:
LB Bases
Hardeners:
LHF
LHM
LHS
Reducers:
LR21
LR25
Flex Agent:
892
Cleaning
Sanding
Second Cleaning
240 - 400 grit
240 - 400 grit
Bare steel
80 - 180 grit
Galvanized Steel
Coarse scuff pad
Aluminum
120 - 180 grit
(without gelcoat
220 grit
Aluminum.
Topcoats:
Remarks:
area.
* LA bases cannot be used to tint 800K due to VOC compliance issues.
US. Rev. 11/21/14
T E C H N I C A L
D A T A
Tinted Wet-On-Wet Sealer Application with LHF, LHM, LHS
Flexed
S
Mixing ratio:
Step 1 - 1:1
Step 1 - 1:1
Primer
1 part 800K
1 part 800K
Base
1 part LB Base
1 part LB Base
Step 2 - 4:1:1
Step 2 - 4:1:1:1
Hardener
Reducer
1 part LR21 or LR25
1 part LR21 or LR25
Flex Agent
—
1 part 892
8 hours
8 hours
@ 68°F/20°C
13 - 15 seconds
13 - 15 seconds
1.5 - 1.7 mm
1.5 - 1.7 mm
8 - 10 psi
8 - 10 psi
Application
1 medium wet coat
1 medium wet coat
15 - 30 minutes
15 - 30 minutes
Film build
0.5 - 1.5 mils
0.5 - 1.5 mils
Coverage
68°F/20°C
15 - 30 minutes
15 - 30 minutes
140°F/60°C
N/A
N/A
N/A
N/A
N/A
N/A
Wet by Hand
N/A
N/A
Dry by Hand
N/A
N/A
Dry by Machine
N/A
N/A
VOC as packaged
VOC as applied
Drying:
Sanding:
Comments
U N D E R C O AT S
Primer Surfacer Application
Description:
Limco 846 1K Acrylic Primer is a non-settling, fast drying, easy sanding, flexible primer that meets
the U.S. National Rule and provides excellent adhesion plus good color hold-out.
Materials:
Primer:
846
Reducers:
LR21
LR25
Cleaning
Sanding
Second Cleaning
240 - 400 grit
240 - 400 grit
Bare steel
80 - 180 grit
Galvanized Steel
Coarse scuff pad
Aluminum
120 - 180 grit
(without gelcoat)
220 grit
Aluminum.
Topcoats:
Remarks: Always check local VOC laws to ensure that the use of these Limco products is compliant in your
area.
846 is a high filling, fast sanding 1K lacquer primer. Best results are obtained when thinner coats,
with 5 - 10 minutes flash between coats, are observed. Excessive film builds of lacquer primer can
lead to soft topcoats or premature film failures.
US. Rev. 11/21/14
T E C H N I C A L
D A T A
S
Mixing ratio:
1:1
Primer
1 part 846
Reducer
1 part LR21 or LR25
N/A
@ 68°F/20°C
12 - 15 seconds
1.5 mm
10 psi
Application
5 - 10 minutes
Film build
2.0 - 3.0 mils
Coverage
Drying:
68°F/20°C
20 minutes
140°F/60°C
N/A
N/A
N/A
Sanding:
Wet by Hand
N/A
Dry by Hand
320 grit
Dry by Machine
280 grit
VOC as packaged
VOC as applied
Comments
U N D E R C O AT S
H1000 1K Waterborne Primer
Description:
Limco H1000 1K Waterborne Primer is a grey, 1K Low VOC Waterborne System that is fast drying,
easy sanding and provides excellent adhesion with good color holdout.
Materials:
Primer Surfacer: H1000
Cleaning Sanding
Second Cleaning
R-M 909 Final Wipe
240 - 400 grit
R-M 909 Final Wipe
R-M 909 Final Wipe
240 - 400 grit
R-M 909 Final Wipe
Bare steel
R-M 909 Final Wipe
80 - 180 grit
R-M 909 Final Wipe
Galvanized Steel
R-M 909 Final Wipe
Then, pre-prime with LP20
Coarse scuff pad
R-M 909 Final Wipe
Aluminum
R-M 909 Final Wipe Then, pre-prime with LP20
120 - 180 grit
R-M 909 Final Wipe
(without gelcoat)
R-M 909 Final Wipe
220 grit
R-M 909 Final Wipe
Aluminum.
Topcoats:
Limco Low VOC Urethane (Limco 3) 420 gms/liter (3.5 lbs/gal) VOC
Limco Low VOC Industrial Urethane Single Stage (Limco 7) 420 gms/liter (3.5 lbs/gal) VOC
Supreme PLUS Low VOC Acrylic 1K Single Stage 340 gms/liter (2.8 lbs/gal) VOC
Supreme PLUS Low VOC Urethane Single Stage 340 gms/liter (2.8 lbs/gal) VOC
Supreme PLUS Low VOC Basecoat 420 gms/liter (3.5 lbs/gal) VOC
Remarks:
area.
Shelf Life - 12 months
Keep from freezing.
Store at temperatures 40°F - 105°F / 5°C - 40°C.
Dry sand only. DO NOT wet sand H1000 1K Waterborne Primer.
US. Rev. 11/21/14
T E C H N I C A L
D A T A
H1000 1K Waterborne Primer
S
Mixing ratio:
Ready for use
Primer
H1000
N/A
@ 68°F/20°C
14 - 16 seconds
1.5 mm
10 psi
Application
2 - 3 coats
5 - 10 minutes between coats
Film build
2.0 - 3.0 mils
Coverage
Drying:
68°F/20°C
30 minutes
140°F/60°C
N/A
N/A
N/A
Sanding:
Wet by Hand
N/A
Dry by Hand
320 grit
Dry by Machine
280 grit
VOC as packaged
VOC as applied
Comments
U N D E R C O AT S
LP20 Epoxy Primer
Primer Application
Description:
Limco LP20 Epoxy Primer is a two part epoxy primer for use as a primer under 800K, 846, PS21nr,
LS800 or LS56. LP20 offers excellent adhesion and corrosion protection when used over steel,
aluminum, zinc coated or galvanized metals. LP20 can be applied over cured, cleaned and sanded
paint finishes (except acrylic lacquers).
Materials:
Primer:
LP20
Activator:
LA20
Reducer:
LR21
Cleaning Sanding
Second Cleaning
240 - 400 grit
240 - 400 grit
Bare steel
80 - 180 grit
Galvanized Steel
Coarse scuff pad
Aluminum
203 Wax and Grease Remover 120 - 180 grit
(without gelcoat)
LP20 is not recommended over this substrate
Aluminum.
Topcoats:
Remarks:
US. Rev. 11/21/14
area.
T E C H N I C A L
D A T A
LP20 Epoxy Primer
Primer Application
S
Mixing ratio:
3:1:1
Primer
3 parts LP20
Activator
1 part LA20
Reducer
1 part LR21
8 hours
@ 68°F/20°C
12 seconds
1.3 - 1.5 mm
6 - 10 psi
Application
1 - 2 light coats
Film build
0.5 - 0.75 mils
Coverage
970 - 1038 sq. ft./gal @ 0.5 mil
Drying:
68°F/20°C
15 - 30 minutes
140°F/60°C
N/A
N/A
N/A
Sanding:
Wet by Hand
N/A
Dry by Hand
N/A
Dry by Machine
N/A
VOC as packaged
VOC as applied
Comments
Do not use over flexible parts.
U N D E R C O AT S
LP20 Epoxy Primer
Low VOC Primer Application
Description:
LP20 Epoxy Primer is a two part epoxy primer for use as a primer under H1000, LP610 or LP620.
LP20 offers excellent adhesion and corrosion protection when used over steel, aluminum, zinc
coated or galvanized metals. LP20 can be applied over cured, cleaned and sanded paint finishes
(except acrylic lacquers).
Materials:
Primer:
LP20
Activator:
LA25
Reducer:
LR21
Cleaning
Sanding
Second Cleaning
R-M 909 Final Wipe
240 - 400 grit
R-M 909 Final Wipe
R-M 909 Final Wipe
240 - 400 grit
R-M 909 Final Wipe
Bare steel
R-M 909 Final Wipe
80 - 180 grit
R-M 909 Final Wipe
Galvanized Steel
R-M 909 Final Wipe
Coarse scuff pad
R-M 909 Final Wipe
Aluminum
R-M 909 Final Wipe 120 - 180 grit
R-M 909 Final Wipe
(without gelcoat)
Aluminum.
Topcoats:
Remarks:
US. Rev. 11/21/14
area.
T E C H N I C A L
D A T A
LP20 Epoxy Primer
S
Mixing ratio:
4:1:1
Primer
4 parts LP20
Activator
1 part LA25
Reducer
1 part LR21
8 hours
@ 68°F/20°C
12 seconds
1.3 - 1.5 mm
6 - 10 psi
Application
1 - 2 light coats
Film build
0.5 - 0.75 mils
Coverage
970 - 1038 sq. ft./gal @ 0.5 mil
Drying:
68°F/20°C
15 - 30 minutes
140°F/60°C
N/A
N/A
N/A
Sanding:
Wet by Hand
N/A
Dry by Hand
N/A
Dry by Machine
N/A
VOC as packaged
VOC as applied
Comments
U N D E R C O AT S
LP20 Epoxy Primer
Description:
Limco LP20 Epoxy Primer is a two part epoxy primer for use as a Primer Surfacer. LP20 offers excellent
adhesion and corrosion protection when used over steel, aluminum, zinc coated or galvanized
metals. LP20 can be applied over cured, cleaned and sanded paint finishes (except acrylic lacquers).
Materials:
Primer Surfacer:
LP20
Activator:
LA20
Reducer:
LR21
Cleaning Sanding
Second Cleaning
240 - 400 grit
240 - 400 grit
Bare steel
80 - 180 grit
Galvanized Steel
Coarse scuff pad
Aluminum
(without gelcoat)
Aluminum.
Topcoats:
Remarks:
US. Rev. 11/21/14
area.
T E C H N I C A L
D A T A
LP20 Epoxy Primer
S
Mixing ratio:
3:1:1
Primer
3 parts LP20
Activator
1 part LA20
Reducer
1 part LR21
8 hours
@ 68°F/20°C
12 seconds
1.5 - 1.8 mm
6 - 10 psi
Application
2 - 3 medium coats
Film build
2.0 - 2.5 mils
Coverage
Drying:
68°F/20°C
3 hours
140°F/60°C
30 - 35 minutes
N/A
N/A
Sanding:
Wet by Hand
400 - 600 grit
Dry by Hand
320 - 400 grit
Dry by Machine
320 - 400 grit
VOC as packaged
VOC as applied
Comments
U N D E R C O AT S
LP20 Epoxy Primer
Low VOC Primer Surfacer Application
Description:
Limco LP20 Epoxy Primer is a two part epoxy primer for use as a Primer Surfacer. LP20 offers excellent
adhesion and corrosion protection when used over steel, aluminum, zinc coated or galvanized
metals. LP20 can be applied over cured, cleaned and sanded paint finishes (except acrylic lacquers).
Materials:
Primer Surfacer:
LP20
Activator:
LA25
Reducer:
LR21
Cleaning
Sanding
Second Cleaning
R-M 909 Final Wipe
240 - 400 grit
R-M 909 Final Wipe
R-M 909 Final Wipe
240 - 400 grit
R-M 909 Final Wipe
Bare steel
R-M 909 Final Wipe
80 - 180 grit
R-M 909 Final Wipe
Galvanized Steel
R-M 909 Final Wipe
Coarse scuff pad
R-M 909 Final Wipe
Aluminum
R-M 909 Final Wipe
(without gelcoat)
Aluminum.
Topcoats:
Remarks:
US. Rev. 11/21/14
area.
T E C H N I C A L
D A T A
LP20 Epoxy Primer
S
Mixing ratio:
4:1:1
Primer
4 parts LP20
Activator
1 part LA25
Reducer
1 part LR21
8 hours
@ 68°F/20°C
20 seconds
1.5 - 1.8 mm
6 - 10 psi
Application
2 - 3 medium coats
Film build
2.0 - 2.5 mils
Coverage
Drying:
68°F/20°C
6 hours
140°F/60°C
30 - 35 minutes
N/A
N/A
Sanding:
Wet by Hand
400 - 600 grit
Dry by Hand
320 - 400 grit
Dry by Machine
320 - 400 grit
VOC as packaged
VOC as applied
Comments
U N D E R C O AT S
LP20 Epoxy Primer
Wet-On-Wet Sealer Application
Description:
Limco LP20 Epoxy Primer is a two part epoxy primer for use as a wet-on-wet sealer under Limco
topcoats. LP20 can be applied over cured, cleaned and sanded paint finishes (except acrylic lacquers).
Materials:
Sealer:
LP20
Activator:
LA20
Reducer:
LR21
Cleaning Sanding
Second Cleaning
240 - 400 grit
240 - 400 grit
Bare steel
80 - 180 grit
Galvanized Steel
Coarse scuff pad
Aluminum
(without gelcoat)
Aluminum.
Topcoats:
Remarks:
US. Rev. 11/21/14
area.
T E C H N I C A L
D A T A
LP20 Epoxy Primer
S
Untinted
Tinted with
LB Bases
Tinted with
LA Bases
Mixing ratio:
3:1:1
3:1:1:1
3:1:1:1
Primer
3 parts LP20
3 parts LP20
3 parts LP20
Base
–
1 part LB Base
1 part LA Base
Activator
1 part LA20
1 part LA20
1 part LA20
Reducer
1 part LR21
1 part LR21
1 part LR21
8 hours
8 hours
8 hours
@ 68°F/20°C
12 seconds
12 seconds
12 seconds
1.5 - 1.8 mm
1.5 - 1.8 mm
1.5 - 1.8 mm
6 - 10 psi
6 - 10 psi
6 - 10 psi
Application
1 medium wet coat
or 2 light coats
1 medium wet coat
or 2 light coats
1 medium wet coat
or 2 light coats
5 - 10 minutes
between coats
5 - 10 minutes
between coats
5 - 10 minutes
between coats
Film build
0.75 - 1.3 mils
0.75 - 1.3 mils
0.75 - 1.3 mils
Coverage
68°F/20°C
45 minutes before
topcoating with Limco
45 minutes before
45 minutes before
140°F/60°C
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Wet by Hand
N/A
N/A
N/A
Dry by Hand
N/A
N/A
N/A
Dry by Machine
N/A
N/A
N/A
VOC as packaged
VOC as applied
Comments
Drying:
Sanding:
U N D E R C O AT S
LP20 Epoxy Primer
Low VOC Wet-On-Wet Sealer Application
Description:
Limco LP20 Epoxy Primer is a two part epoxy primer for use as a wet-on-wet sealer under Limco
topcoats. LP20 can be applied over cured, cleaned and sanded paint finishes (except acrylic lacquers).
Materials:
Sealer:
LP20
Activator:
LA25
Reducer:
LR21
Cleaning
Sanding
Second Cleaning
R-M 909 Final Wipe
240 - 400 grit
R-M 909 Final Wipe
R-M 909 Final Wipe
240 - 400 grit
R-M 909 Final Wipe
Bare steel
R-M 909 Final Wipe
80 - 180 grit
R-M 909 Final Wipe
Galvanized Steel
R-M 909 Final Wipe
Coarse scuff pad
R-M 909 Final Wipe
Aluminum
R-M 909 Final Wipe
(without gelcoat)
Aluminum.
Topcoats:
Remarks:
US. Rev. 11/21/14
area.
T E C H N I C A L
D A T A
LP20 Epoxy Primer
Low VOC Wet-On-Wet Sealer Application
S
Untinted
Tinted with
LB Bases
Tinted with
LA Bases
Mixing ratio:
4:1:1
4:1:1:1
4:1:1:1
Primer
4 parts LP20
4 parts LP20
4 parts LP20
Base
–
1 part LB Base
1 part LA Base
Activator
1 part LA25
1 part LA25
1 part LA25
Reducer
1 part LR21
1 part LR21
1 part LR21
8 hours
8 hours
8 hours
@ 68°F/20°C
12 seconds
12 seconds
12 seconds
1.5 - 1.8 mm
1.5 - 1.8 mm
1.5 - 1.8 mm
6 - 10 psi
6 - 10 psi
6 - 10 psi
Application
1 medium wet coat
or 2 light coats
1 medium wet coat
or 2 light coats
1 medium wet coat
or 2 light coats
5 - 10 minutes
between coats
5 - 10 minutes
between coats
5 - 10 minutes
between coats
Film build
0.75 - 1.3 mils
0.75 - 1.3 mils
0.75 - 1.3 mils
Coverage
68°F/20°C
45 minutes before
45 minutes before
45 minutes before
140°F/60°C
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Wet by Hand
N/A
N/A
N/A
Dry by Hand
N/A
N/A
N/A
Dry by Machine
N/A
N/A
N/A
VOC as packaged
VOC as applied
Comments
Drying:
Sanding:
U N D E R C O AT S
LP100 Etch Primer
Primer Application
Description:
Limco LP100 Etch Primer is chromate free and has excellent adhesion properties that work equally
well on steel, aluminum and galvanized steel. When applied over bare steel, LP100 is an effective
rust inhibitor. Limco LP100 can be primed over with any approved Limco undercoat except H1000.
Limco LP100 should also not be used under waterborne primers or peroxide-cured body fillers.
Materials:
Primer:
LP100
Activator:
LPA100
Reducers:
LR10
LR11
LR12
LR13
LR15
Cleaning Well cured old paint work
Sanding
Second Cleaning
Bare steel
80 - 180 grit
Galvanized steel
Coarse scuff pad
Aluminum
120 - 180 grit
(without gelcoat)
Aluminum.
Topcoats:
A topcoat can not be applied directly over LP100.
Remarks:
area.
US. Rev. 11/21/14
T E C H N I C A L
D A T A
LP100 Etch Primer
Primer Application
S
Mixing ratio:
1:1:50%
Primer
1 part LP100
Activator
1 part LPA100
Reducer
50% LR10, LR11, LR12, LR13 or LR15
N/A
@ 68°F/20°C
12 - 13 seconds
1.5 mm
8 - 10 psi
Application
1 medium wet coat or 2 light coats
5 - 10 minutes
Film build
0.5 - 1.5 mil
Coverage
Drying:
68°F/20°C
15 minutes
140°F/60°C
N/A
N/A
N/A
Sanding:
Wet by Hand
N/A
Dry by Hand
N/A
Dry by Machine
N/A
VOC as packaged
VOC as applied
697 - 770 gms/liter (5.8 - 6.4 lbs/gal)
Comments
Appropriate undercoat must be applied on top of LP100 within 4 hours of application.
This product may be reduced up to 150%. Higher reduction will alter viscosity, film
build per coat and square foot coverage.
U N D E R C O AT S
LP100 Etch Primer
Description:
Limco LP100 Etch Primer is chromate free and has excellent adhesion properties that work equally
well on steel, aluminum and galvanized steel. When applied over bare steel, LP100 is an effective
rust inhibitor. Limco LP100 can be primed over with any approved Limco undercoat except H1000.
Limco LP100 should also not be used under waterborne primers or peroxide-cured body fillers.
Materials:
Primer:
LP100
Activator:
LPA100
Reducers:
LR21
LR25
Cleaning Well cured old paint work
Sanding
Second Cleaning
Bare steel
R-M 909 Final Wipe
80 - 180 grit
R-M 909 Final Wipe
Galvanized steel
R-M 909 Final Wipe
Coarse scuff pad
R-M 909 Final Wipe
Aluminum
R-M 909 Final Wipe
120 - 180 grit
R-M 909 Final Wipe
(without gelcoat)
Aluminum.
Topcoats:
A topcoat can not be applied directly over LP100.
Remarks:
area.
US. Rev. 11/21/14
T E C H N I C A L
D A T A
LP100 Etch Primer
S
Mixing ratio:
1:1:150%
Primer
1 part LP100
Activator
1 part LPA100
Reducer
150% LR21 or LR25
N/A
@ 68°F/20°C
10 - 11 seconds
1.5 mm
8 - 10 psi
Application
1 medium wet coat or 2 light coats
5 - 10 minutes
Film build
0.5 - 1.5 mil
Coverage
Drying:
68°F/20°C
15 minutes
140°F/60°C
N/A
N/A
N/A
Sanding:
Wet by Hand
N/A
Dry by Hand
N/A
Dry by Machine
N/A
VOC as packaged
VOC as applied
Comments
Appropriate undercoat must be applied on top of LP100 within 4 hours of application.
U N D E R C O AT S
Description:
Limco LP610 Low VOC Primer is a quick cure, sandable primer that provides good sand scratch filling
with excellent adhesion and topcoat holdout. It is a 2.1 VOC compliant performance primer that
provides good filling properties.
Materials:
Primer:
LP610
Hardeners:
LH401
LH405
LH415
Reducers:
LR21
LR25
Flex Agent:
892
Cleaning Sanding
Second Cleaning
R-M 909 Final Wipe
240 - 400 grit
R-M 909 Final Wipe
R-M 909 Final Wipe
240 - 400 grit
R-M 909 Final Wipe
Bare steel
R-M 909 Final Wipe
80 - 180 grit
R-M 909 Final Wipe
Galvanized Steel
R-M 909 Final Wipe
Coarse scuff pad
R-M 909 Final Wipe
Aluminum
R-M 909 Final Wipe Then, pre-prime with LP20 or LP100
120 - 180 grit
R-M 909 Final Wipe
(without gelcoat)
R-M 909 Final Wipe
220 grit
R-M 909 Final Wipe
Aluminum.
Topcoats:
Remarks:
area.
Use an adhesion promoter when refinishing raw plastic parts.
US. Rev. 2/5/15
T E C H N I C A L
D A T A
Flexed
Mixing ratio:
Primer
S
8:1:2
4:1:1:1
8 parts LP610
4 parts LP610
Flex Agent
—
1 part 892
Hardener
1 part LH401, LH405 or LH415
Reducer
2 parts LR21 or LR25
1 part LR21 or LR25
30 - 45 minutes
30 - 45 minutes
@ 68°F/20°C
13 - 18 seconds
15 - 19 seconds
1.5 - 1.7 mm
1.5 - 1.7 mm
6 - 10 psi
6 - 10 psi
Application
Film build
2.0 mils total dry film build
2.0 mils total dry film build
Coverage
68°F/20°C
60 - 90 minutes
90 - 120 minutes
140°F/60°C
30 minutes;
allow 10 minutes flash before force dry
30 minutes;
5 - 7 minutes
6 - 8 minutes
N/A
N/A
Wet by Hand
400 grit
400 grit
Dry by Hand
320 grit
320 grit
Dry by Machine
320 grit
320 grit
VOC as packaged
VOC as applied
Drying:
Sanding:
Comments
U N D E R C O AT S
Low VOC Sealer Application
Description:
Materials:
Primer:
LP610
Hardeners:
LH401
LH405
LH415
Reducers:
LR21
LR25
Flex Agent:
892
Cleaning Sanding
Second Cleaning
R-M 909 Final Wipe
240 - 400 grit
R-M 909 Final Wipe
R-M 909 Final Wipe
240 - 400 grit
R-M 909 Final Wipe
Bare steel
R-M 909 Final Wipe
80 - 180 grit
R-M 909 Final Wipe
Galvanized Steel
R-M 909 Final Wipe
Coarse scuff pad
R-M 909 Final Wipe
Aluminum
120 - 180 grit
R-M 909 Final Wipe
(without gelcoat)
R-M 909 Final Wipe
220 grit
R-M 909 Final Wipe
Aluminum.
Topcoats:
Remarks:
area.
US. Rev. 2/5/15
T E C H N I C A L
D A T A
Flexed
Mixing ratio:
Primer
S
8:1:4
4:1:1:2
8 parts LP610
4 parts LP610
Flex Agent
—
1 part 892
Hardener
Reducer
45 - 60 minutes
30 - 45 minutes
@ 68°F/20°C
12 - 15 seconds
13 - 16 seconds
1.5 mm
1.5 - 1.6 mm
6 - 10 psi
6 - 10 psi
Application
Film build
1.0 - 1.5 mils total dry film build
Coverage
68°F/20°C
30 minutes flash before topcoating
140°F/60°C
N/A
N/A
N/A
N/A
N/A
N/A
Wet by Hand
N/A
N/A
Dry by Hand
N/A
N/A
Dry by Machine
N/A
N/A
VOC as packaged
VOC as applied
Drying:
Sanding:
Comments
U N D E R C O AT S
Description:
Limco LP620 Low VOC Primer in this National Rule presentation is a quick cure, sandable primer
that provides good sand scratch filling with excellent adhesion and topcoat holdout. It is a National
Rule compliant performance primer that provides good filling properties.
Materials:
Primer:
LP620
Hardeners:
LHF
LHM
LHS
Reducers:
LR10
LR11
LR12
LR13
LR15
Cleaning Sanding
Second Cleaning
240 - 400 grit
240 - 400 grit
Bare steel
80 - 180 grit
Galvanized Steel
Coarse scuff pad
Aluminum
120 - 180 grit
(without gelcoat)
220 grit
Aluminum.
Topcoats:
Remarks:
area.
US. Rev. 8/4/15
T E C H N I C A L
D A T A
Mixing ratio:
S
4:1:1
Primer
4 parts LP620
Hardener
Reducer
45 minutes
@ 68°F/20°C
16 - 20 seconds
1.5 - 1.7 mm
6 - 10 psi
Application
5 minutes
Film build
Coverage
Drying:
68°F/20°C
60 - 90 minutes
140°F/60°C
30 - 40 minutes; allow 10 minutes flash before force drying.
5 - 7 minutes
N/A
Sanding:
Wet by Hand
400 grit
Dry by Hand
320 grit
Dry by Machine
320 grit
VOC as packaged
VOC as applied
Comments
U N D E R C O AT S
Description:
Materials:
Primer:
LP620
Hardeners:
LH401
LH405
LH415
Reducers:
LR21
LR25
Cleaning Sanding
Second Cleaning
R-M 909 Final Wipe
240 - 400 grit
R-M 909 Final Wipe
R-M 909 Final Wipe
240 - 400 grit
R-M 909 Final Wipe
Bare steel
R-M 909 Final Wipe
80 - 180 grit
R-M 909 Final Wipe
Galvanized Steel
R-M 909 Final Wipe
Coarse scuff pad
R-M 909 Final Wipe
Aluminum
120 - 180 grit
R-M 909 Final Wipe
(without gelcoat)
R-M 909 Final Wipe
220 grit
R-M 909 Final Wipe
Aluminum.
Topcoats:
Remarks:
area.
US. Rev. 11/21/14
T E C H N I C A L
D A T A
Mixing ratio:
S
4:1:1
Primer
4 parts LP620
Hardener
Reducer
1 part LR21 or LR25
45 minutes
@ 68°F/20°C
16 - 20 seconds
1.5 - 1.7 mm
6 - 10 psi
Application
5 minutes
Film build
Coverage
Drying:
68°F/20°C
60 - 90 minutes
140°F/60°C
30 - 40 minutes; allow 10 minutes flash before force drying.
5 - 7 minutes
N/A
Sanding:
Wet by Hand
400 grit
Dry by Hand
320 grit
Dry by Machine
320 grit
VOC as packaged
VOC as applied
Comments
U N D E R C O AT S
Sealer Application
Description:
Limco LP620 Low VOC Primer in this National Rule presentation is a quick cure, sandable primer
that provides good sand scratch filling with excellent adhesion and topcoat holdout. It is a National
Rule compliant performance primer that provides good filling properties.
Materials:
Primer:
LP620
Hardeners:
LHF
LHM
LHS
Reducers:
LR10
LR11
LR12
LR13
LR15
Flex Agent:
892
Cleaning Sanding
Second Cleaning
240 - 400 grit
240 - 400 grit
Bare steel
80 - 180 grit
Galvanized Steel
Coarse scuff pad
Aluminum
120 - 180 grit
(without gelcoat)
220 grit
Aluminum.
Topcoats:
Remarks:
area.
US. Rev. 8/4/15
T E C H N I C A L
D A T A
Sealer Application
Flexed
Mixing ratio:
S
Tinted
4:1:2
4:1:1:2
4:4:1:2
Primer
4 parts LP620
4 parts LP620
4 parts LP620
Color
—
—
4 parts LA Base
Flex Agent
—
1 part 892
—
Hardener
Reducer
2 parts LR10, LR11, LR12,
LR13 or LR15
LR13 or LR15
LR13 or LR15
60 minutes
90 minutes
60 minutes
@ 68°F/20°C
13 - 16 seconds
13 - 16 seconds
13 - 16 seconds
1.3 - 1.5 mm
1.3 - 1.5 mm
1.3 - 1.5 mm
6 - 10 psi
6 - 10 psi
6 - 10 psi
Application
1 medium wet coat
1 medium wet coat
1 medium wet coat
N/A
N/A
N/A
Film build
1.0 - 1.5 mils total dry film
build
build
build
Coverage
140°F/60°C
30 minutes flash before
topcoating
N/A
topcoating
N/A
topcoating
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Wet by Hand
N/A
N/A
N/A
Dry by Hand
N/A
N/A
N/A
Dry by Machine
N/A
N/A
N/A
VOC as packaged
VOC as applied
Drying:
68°F/20°C
Sanding:
Comments
U N D E R C O AT S
Description:
Limco LP620 Low VOC Primer is a 2.1 VOC compliant performance sealer that provides good filling
properties and quick drying with good melt-in and topcoat holdout..
Materials:
Primer:
LP620
Hardeners:
LH401
LH405
LH415
Reducers:
LR21
LR25
Flex Agent:
892
Cleaning Sanding
Second Cleaning
R-M 909 Final Wipe
240 - 400 grit
R-M 909 Final Wipe
R-M 909 Final Wipe
240 - 400 grit
R-M 909 Final Wipe
Bare steel
R-M 909 Final Wipe
80 - 180 grit
R-M 909 Final Wipe
Galvanized Steel
R-M 909 Final Wipe
Coarse scuff pad
R-M 909 Final Wipe
Aluminum
120 - 180 grit
R-M 909 Final Wipe
(without gelcoat)
R-M 909 Final Wipe
220 grit
R-M 909 Final Wipe
Aluminum.
Topcoats:
Remarks:
area.
US. Rev. 11/21/14
T E C H N I C A L
D A T A
Flexed
Mixing ratio:
Primer
S
4:1:2
4:1:1:2
4 parts LP620
4 parts LP620
Flex Agent
—
1 part 892
Hardener
Reducer
60 minutes
90 minutes
@ 68°F/20°C
13 - 16 seconds
13 - 16 seconds
1.3 - 1.5 mm
1.3 - 1.5 mm
6 - 10 psi
6 - 10 psi
Application
1 medium wet coat
1 medium wet coat
N/A
N/A
Film build
Coverage
68°F/20°C
140°F/60°C
N/A
N/A
N/A
N/A
N/A
N/A
Wet by Hand
N/A
N/A
Dry by Hand
N/A
N/A
Dry by Machine
N/A
N/A
VOC as packaged
VOC as applied
Drying:
Sanding:
Comments
U N D E R C O AT S
LS56 1K Sealer
Description:
Limco LS56 1K Sealer is a fast drying sealer that provides excellent adhesion with good topcoat
color hold out.
Materials:
Sealer:
LS56
Reducer:
LR21
Cleaning Sanding
Second Cleaning
240 - 400 grit
Bare steel
Then, Pre-prime with LP20 or LP100
80 - 180 grit
Galvanized Steel
Coarse scuff pad
Aluminum
120 - 180 grit
Fiberglass (with gelcoat)
220 grit
Aluminum.
Topcoats:
Remarks:
US. Rev. 11/21/14
area.
T E C H N I C A L
D A T A
LS56 1K Sealer
Mixing ratio:
S
2:1
Sealer
2 parts LS56
Reducer
1 part LR21
N/A
@ 68°F/20°C
12 - 14 seconds
1.5 - 1.7 mm
8 - 10 psi
Application
1 medium wet coat
30 minutes; 10 hours (max.)
Film build
0.5 - 0.8 mils
Coverage
Drying:
68°F/20°C
30 minutes
140°F/60°C
N/A
N/A
N/A
Sanding:
Wet by Hand
N/A
Dry by Hand
N/A
Dry by Machine
N/A
VOC as packaged
VOC as applied
Comments
U N D E R C O AT S
LS800 2K Sealer
Description:
The LS800 2K Sealer is a tintable wet-on-wet sealer that dries quickly and provides excellent
adhesion. LS800 2K Sealer can be tinted using either Limco LB bases or Limco Supreme LA bases.
Materials:
Sealer:
LS800
Limco Bases:
LB Bases
Supreme Bases:
LA Bases
Hardeners:
LHF
LHM
Reducers:
LR10
LR11
LR12
LR13
Flex Agent:
892
Cleaning
Sanding
Second Cleaning
240 - 400 grit
240 - 400 grit
Bare steel
80 - 180 grit
Galvanized Steel
Coarse scuff pad
Aluminum
120 - 180 grit
(without gelcoat)
220 grit
Aluminum.
Topcoats:
Remarks:
area.
Do not use mixed color to tint LS800. Tint LS800 with LB bases or LA bases only.
Do not force dry LS800, wet-on- wet application.
US. Rev. 11/21/14
T E C H N I C A L
D A T A
LS800 2K Sealer
S
Untinted
Tinted with
LB Bases
Tinted with
LA Bases
Mixing ratio:
4:1:2
4:1:1:2
4:1:1:2
Primer
4 parts LS800
4 parts LS800
4 parts LS800
Base
—
1 part LB Base
1 part LA Base
Hardener
1 part LHF or LHM
1 part LHF or LHM
1 part LHF or LHM
Reducer
2 parts LR10, LR11, LR12 or
LR13
LR13
LR13
45 - 60 minutes
45 - 60 minutes
45 - 60 minutes
@ 68°F/20°C
13 - 15 seconds
13 - 15 seconds
13 - 15 seconds
1.4 - 1.5 mm
1.4 - 1.5 mm
1.4 - 1.5 mm
Spray pressure HVLP at the cap 8 - 10 psi
8 - 10 psi
8 - 10 psi
Application
15 minutes
15 minutes
30 minutes
Film build
1.0 - 1.5 mils
1.0 - 1.5 mils
1.0 - 1.5 mils
Coverage
68°F/20°C
15 minutes (no longer than
3 hours before topcoat)
140°F/60°C
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Wet by Hand
N/A
N/A
N/A
Dry by Hand
N/A
N/A
N/A
Dry by Machine
N/A
N/A
N/A
VOC as packaged
< 431 gms/liter (< 3.6 lbs/gal) < 431 gms/liter (< 3.6 lbs/gal) < 431 gms/liter (< 3.6 lbs/gal)
VOC as applied
< 550 gms/liter (< 4.6 lbs/gal) < 550 gms/liter (< 4.6 lbs/gal) < 550 gms/liter (< 4.6 lbs/gal)
Comments
For flexible plastic parts:
Drying:
Sanding:
4 parts LS800
1 part 892
1 additional part of hardener
Then follow appropriate tinted or untinted mix ratio.
U N D E R C O AT S
Description:
Limco PS21nr 1K Gray Sealer improves color hold-out and eliminates sand scratch swelling. This
sealer is non-sanding, fast drying and ensures excellent adhesion.
Materials:
Sealer:
Cleaning
Sanding
Second Cleaning
240 - 400 grit
240 - 400 grit
Bare steel
80 - 180 grit
Galvanized Steel
Coarse scuff pad
Aluminum
120 - 180 grit
(without gelcoat)
PS21nr is not recommended under this substrate
PS21nr
Aluminum.
Topcoats:
Remarks:
US. Rev. 11/21/14
area.
T E C H N I C A L
D A T A
Wet-ON-Wet Sealer Application
Mixing ratio:
Sealer
S
Ready for use
PS21nr
N/A
@ 68°F/20°C
13 seconds
1.5 mm
10 psi
Application
1 - 2 light coats
5 to 10 minutes between coats
Film build
0.5 - 1.0 mil
Coverage
Drying:
68°F/20°C
20 minutes
140°F/60°C
N/A
N/A
N/A
Sanding:
Wet by Hand
N/A
Dry by Hand
N/A
Dry by Machine
N/A
VOC as packaged
VOC as applied
Comments
If allowed to dry overnight, sand with 400 grit then, clean with 139 Final Wash Cleaner
to remove sanding residue prior to topcoating.
T O P C O AT S
Description:
Limco Synthetic Enamel is a superior development in automotive enamels for refinishing passenger
cars, light trucks and commercial vehicles. It is a fast drying enamel providing fast film build, ease
of application and a durable finish. Limco Synthetic Enamel is also available in Quick Mix colors.
Materials:
Limco Bases:
LB Bases
Quick Mix Colors:
Q Bases
Synthetic Enamel
Mixing Clear:
LMC1
Reducers:
LR10
LR11
LR12
LR13
LR15
Substrates prepared
for topcoating:
Finish Sanding
400 grit
Primer Surfacer 800K
320 - 500 grit
Primer Surfacer 846
320 - 500 grit
Primer Surfacer LP20
320 - 500 grit
Primer Sealer LP20
Sanding not required
Primer Sealer LS56
Primer Sealer LS800
Primer Sealer PS21nr
Remarks:
area.
For custom Limco Synthetic Enamel (U.S. National Rule) colors, the color (LB, Q bases) must be mixed
2 parts to 1 part of LMC1 by volume prior to addition of reducer.
US. Rev. 8/1/13
T E C H N I C A L
D A T A
S
Mixing ratio:
4:1
Color
4 parts Color
Reducer
1 part LR10, LR11, LR12, LR13 or LR15 (1)
N/A
@ 68°F/20°C
18 - 20 seconds
1.3 - 1.5 mm
10 psi
Application
2 - 3 coats
Film build
2.0 - 2.5 mils
Coverage
Drying:
68°F/20°C
30 minutes dust free; 8 hours to handle
140°F/60°C
35 minutes; allow 20 minutes flash before force dry
10 - 15 minutes
35 minutes
Sanding:
Wet by Hand
N/A
Dry by Hand
N/A
Dry by Machine
N/A
VOC as packaged
Varies, dependent on color
VOC as applied
551 - 599 gms/liter (4.6 - 5.0 lbs/gal)
Comments
(1) LR15 is recommended for most high temperature conditions. LR15 will be used as
a blend with LR13 (up to 50%).
Wait 72 hours before sanding, compounding or recoating
Shake new tinting bases for 15 minutes using a mechanical paint shaker before placing
on a mixing machine.
Tinting bases on a mixing machine need to be agitated for 15 minutes at the start of
the work day and every 4 hours during the day to ensure good color matching.
T O P C O AT S
with catalyst
Description:
Limco Synthetic Enamel with catalyst adds improved gloss, shorter dry times and increased durability
to the standard Limco Synthetic Enamel. Limco Synthetic Enamel is also available in Quick Mix
colors.
Materials:
Limco Bases:
LB Bases
Quick Mix Colors:
Q Bases
Synthetic Enamel
Mixing Clear:
LMC1
Hardeners:
LH100
LH130
Reducers:
LR10
LR11
LR12
LR13
LR15
Substrates prepared
for topcoating:
Finish Sanding
400 grit
320 - 500 grit
Primer Surfacer 846
320 - 500 grit
320 - 500 grit
Primer Sealer LP20
Primer Sealer LS56
Primer Sealer LS800
Remarks:
area.
For custom Limco Synthetic Enamel with catalyst (U.S. National Rule) colors, the color (LB, Q bases)
must be mixed 2 parts to 1 part of LMC1 by volume prior to addition of hardener and reducer.
US. Rev. 8/1/13
T E C H N I C A L
D A T A
Limco Synthetic Enamel with catalyst (Limco 1)
S
LH100 catalyst
LH130 catalyst
Mixing ratio:
8:1:4
4:1
Color
8 parts Color
4 parts Color
Hardener
1 part LH100
1 part LH130
Reducer
4 parts LR10, LR11, LR12, LR13 or LR15 (1)
—
4 hours
2 hours
@ 68°F/20°C
15 - 18 seconds
18 - 20 seconds
1.3 - 1.5 mm
1.3 - 1.5 mm
10 psi
10 psi
Application
2 - 3 coats
2 - 3 coats
10 minutes
10 minutes
Film build
2.0 - 2.5 mils
2.0 - 2.5 mils
Coverage
68°F/20°C
140°F/60°C
30 minutes;
30 minutes;
10 minutes
10 minutes
30 minutes
30 minutes
Sanding:
Wet by Hand
N/A
N/A
Dry by Hand
N/A
N/A
Dry by Machine
N/A
N/A
VOC as packaged
VOC as applied
< 599 gms/liter (< 5.0 lbs/gal)
539 - 587 lbs/gal (4.5 - 4.9 gms/liter)
Comments
Drying:
Wait 24 hours before sanding, compounding or recoating.
T O P C O AT S
Description:
Limco Acrylic Enamel is a specially formulated acrylic enamel with hardener which produces a
superior high gloss durable finish. Limco Acrylic Enamel is also available in Quick Mix colors.
Materials:
Limco Bases:
LB Bases
Quick Mix Colors:
Q Bases
Acrylic Mixing Clear:
LMC2
Hardeners:
LHF
LHM
LHS
Reducers:
LR10
LR11
LR12
LR13
LR15
Flex Agent:
892
Substrates prepared
for topcoating:
Finish Sanding
400 grit
320 - 500 grit
Primer Surfacer 846
320 - 500 grit
320 - 500 grit
Primer Sealer LP20
Primer Sealer LS56
Primer Sealer LS800
Remarks:
area.
For custom Limco Acrylic Enamel (U.S. National Rule) colors, the color (LB, Q bases) must be mixed
2 parts to 1 part of LMC2 by volume prior to addition of hardener and reducer.
US. Rev. 8/1/13
T E C H N I C A L
D A T A
Flexed
S
Mixing ratio:
8:1:4
8:1:4:1
Color
8 parts Color
8 parts Color
Hardener
Reducer
Flex Agent
—
1 part 892
4 hours
4 hours
@ 68°F/20°C
16 - 19 seconds
16 - 19 seconds
1.3 - 1.5 mm
1.3 - 1.5 mm
10 psi
10 psi
Application
2 - 3 coats (additional mist coat may be
required for certain metallics)
2 - 3 coats (additional mist coat may be
required for certain metallics)
Film build
2.0 - 3.0 mils
2.0 - 3.0 mils
Coverage
68°F/20°C
45 - 60 minutes dust free;
6 hours to handle
6 hours to handle
140°F/60°C
35 minutes;
35 minutes;
10 - 15 minutes
10 - 15 minutes
35 minutes
35 minutes
Sanding:
Wet by Hand
N/A
N/A
Dry by Hand
N/A
N/A
Dry by Machine
N/A
N/A
VOC as packaged
VOC as applied
527 - 599 gms/liter (4.4 - 5.0 lbs/gal)
527 - 599 gms/liter (4.4 - 5.0 lbs/gal)
Comments
Drying:
T O P C O AT S
Description:
Limco Urethane is a specially formulated polyurethane with hardener which produces a superior
high gloss and durable finish. Limco Urethane is also available in Quick Mix colors.
Materials:
Limco Bases:
LB Bases
Quick Mix Colors:
Q Bases
Urethane Mixing
Clear:
LMC3
Hardeners:
LH310
LH320
Reducers:
LR10
LR11
LR12
LR13
LR15
Flex Agent:
892
Substrates prepared
for topcoating:
Finish Sanding
400 grit
320 - 500 grit
Primer Surfacer 846
320 - 500 grit
320 - 500 grit
320 - 500 grit
Primer Sealer LP20
Primer Sealer LS56
Primer Sealer LS800
Remarks:
area.
For custom Limco Urethane (U.S. National Rule) colors, the color (LB, Q bases) must be mixed 2
parts to 1 part of LMC3 by volume prior to addition of hardener and reducer.
US. Rev. 11/21/14
T E C H N I C A L
D A T A
Flexed
S
Mixing ratio:
8:1:4
8:1:4:1
Color
8 parts Color
8 parts Color
Hardener
Reducer
Flex Agent
—
1 part 892
4 hours
4 hours
@ 68°F/20°C
15 - 17 seconds
15 - 17 seconds
1.3 - 1.5 mm
1.3 - 1.5 mm
8 - 10 psi
8 - 10 psi
Application
2 - 3 coats (additional mist coat may
be required for certain metallics)
2 - 3 coats (additional mist coat may
Film build
2.0 - 3.0 mils
2.0 - 3.0 mils
Coverage
270 - 290 sq. ft./gal @ 2.0 mils
270 - 290 sq. ft./gal @ 2.0 mils
68°F/20°C
4 hours to handle
4 hours to handle
140°F/60°C
35 minutes
35 minutes
10 - 15 minutes
10 - 15 minutes
35 minutes
35 minutes
Sanding:
Wet by Hand
N/A
N/A
Dry by Hand
N/A
N/A
Dry by Machine
N/A
N/A
VOC as packaged
VOC as applied
539 - 587 gms/liter (4.5 - 4.9 lbs/gal)
539 - 587 gms/liter (4.5 - 4.9 lbs/gal)
Comments
Drying:
T O P C O AT S
Limco Low VOC Urethane (Limco 3)
420 gms/liter (3.5 lbs/gal) VOC
Description:
Limco Low VOC Urethane 420 gms/liter (3.5 lbs/gal) VOC is a specially formulated polyurethane
with hardener and accelerator which produces a superior high gloss durable finish. Limco Urethane
420 gms/liter (3.5 lbs/gal) VOC is also available in Quick Mix colors.
Materials:
Limco Bases:
LB Bases
Quick Mix Colors:
Q Bases
Flow Control:
LB105 *
Urethane
Mixing Clear:
LMC3HS
Hardeners:
LHF
LHM
LHS
Reducers:
LR21
LR25
Flex Agent:
892
Substrates prepared
for topcoating:
Finish Sanding
Cleaner
400 grit
R-M 909 Final Wipe
Primer Surfacer H1000
320 - 400 grit (dry sand only)
R-M 909 Final Wipe
320 - 500 grit
320 - 500 grit
320 - 500 grit
Primer Sealer LP20
Remarks:
area.
* Limco Low VOC Urethane 420 gms/liter (3.5 lbs/gal) VOC Quick Mix colors must have LB105 Flow
and Sag Control and LMC3HS Urethane Mixing Clear added prior to use.
For custom Limco Low VOC Urethane (420 gms/liter) colors, the color (LB, Q bases) must be mixed
2 parts to 1 part of LMC3HS by volume prior to addition of hardener and reducer.
LB105 Flow and Sag Control is contained in most color formulas, or may be added to Limco Low
VOC Urethane 420 gms/liter (3.5 lbs/gal) VOC intermixes at a rate of 3% for solid colors or 5% for
metallic colors prior to catalyzing the mixture.
US. Rev. 11/21/14
T E C H N I C A L
D A T A
Limco Low VOC Urethane (Limco 3)
Flexed
S
Mixing ratio:
4:1:2
4:1:2:1
Color
4 parts Color
4 parts Color
Hardener
Reducer
2 parts LR21 or L25
Flex Agent
—
1 part 892
4 hours
4 hours
@ 68°F/20°C
14 - 16 seconds
14 - 16 seconds
1.5 - 1.7 mm
1.5 - 1.7 mm
10 psi
10 psi
Application
2 coats (additional mist coat may
2 coats (additional mist coat may
Film build
2.0 - 3.0 mils
2.0 - 3.0 mils
Coverage
68°F/20°C
2 to 3 hours dust free;
8 hours to handle
2 to 3 hours dust free;
8 hours to handle
140°F/60°C
30 minutes
30 minutes
10 - 20 minutes
10 - 20 minutes
40 minutes
40 minutes
Sanding:
Wet by Hand
N/A
N/A
Dry by Hand
N/A
N/A
Dry by Machine
N/A
N/A
VOC as packaged
VOC as applied
383 - 419 gms/liter (3.2 - 3.5 lbs/gal)
383 - 419 gms/liter (3.2 - 3.5 lbs/gal)
Comments
Drying:
T O P C O AT S
Description:
Limco Basecoat is part of a basecoat/clearcoat system that features high strength, fast hiding
basecoat colors. This system can be used for the repair of original basecoat/clearcoat finishes or for
a complete paint job. Limco Basecoat color must be clearcoated. Limco Basecoat is also available
in Quick Mix colors.
Materials:
Limco Bases:
LB Bases
Basecoat Mixing
Clear:
Reducers:
LMC4
LBR1470
LBR1480
LBR1490
Substrates prepared
for topcoating:
Finish Sanding
400 grit
320 - 500 grit
Primer Surfacer 846
320 - 500 grit
320 - 500 grit
Primer Sealer LP20
Primer Sealer LS56
Primer Sealer LS800
Clearcoats:
LC4000
LC4100
LC4500
Remarks:
area.
Suggested temperature ranges for Limco Reducers
LBR1470
LBR1480
LBR1490
US. Rev. 8/1/13
up to 75°F
75° - 90°F
90°F and up
For custom Limco Basecoat (U.S. National Rule) colors, the color (LB, Q bases) must be mixed 2 parts
to 1 part of LMC4 by volume prior to addition of reducer.
T E C H N I C A L
D A T A
S
Mixing ratio:
2:1
Color
2 parts Color
Reducer
1 part LBR1470, LBR1480 or LBR1490
N/A
@ 68°F/20°C
12 - 14 seconds
1.3 - 1.5 mm
6 - 10 psi
Application
2 - 3 coats or to hiding
5 - 10 minutes between coats; 5 minutes before force dry
Film build
2.0 mils
Coverage
Drying:
68°F/20°C
20 minutes
140°F/60°C
10 minutes
N/A
N/A
Sanding:
Wet by Hand
N/A
Dry by Hand
N/A
Dry by Machine
N/A
VOC as packaged
VOC as applied
479 - 599 gms/liter (4.0 - 5.0 lbs/gal)
Comments
T O P C O AT S
with hardener
Description:
Limco Basecoat is part of a basecoat/clearcoat system that features high strength, fast hiding
basecoat colors. This system can be used for the repair of original basecoat/clearcoat finishes or
for a complete paint job. Limco Basecoat color must be clearcoated. The use of LHF Hardener will
result in increased durability and intercoat adhesion, plus reduce any film softness that might be
exhibited when using a poorer hiding color. Limco Basecoat is also available in Quick Mix colors.
Materials:
Limco Bases:
LB Bases
Basecoat Mixing
Clear:
LMC4
Hardener
LHF
Reducers:
LBR1470
LBR1480
LBR1490
Substrates prepared
for topcoating:
Finish Sanding
400 grit
320 - 500 grit
Primer Surfacer 846
320 - 500 grit
320 - 500 grit
Primer Sealer LP20
Primer Sealer LS56
Primer Sealer LS800
Clearcoats:
LC4000
LC4100
LC4500
Remarks:
area.
Suggested temperature ranges for Limco Reducers
LBR1470
LBR1480
LBR1490
US. Rev. 8/1/13
up to 75°F
75° - 90°F
90°F and up
For custom Limco Basecoat with hardener (U.S. National Rule) colors, the color (LB, Q bases) must
be mixed 2 parts to 1 part of LMC4 by volume prior to addition of hardener and reducer.
T E C H N I C A L
D A T A
Limco Basecoat (Limco 4) with hardener
S
Mixing ratio:
8:1:4
Color
8 parts Color
Hardener
1 part LHF
Reducer
4 parts LBR1470, LBR1480 or LBR1490
2 hours
@ 68°F/20°C
12 - 14 seconds
1.3 - 1.5 mm
8 - 10 psi
Application
2 - 3 coats or to hiding
5 - 10 minutes between coats; 5 minutes before force dry
Film build
2.0 mils
Coverage
Drying:
68°F/20°C
20 minutes
140°F/60°C
N/A
N/A
N/A
Sanding:
Wet by Hand
N/A
Dry by Hand
N/A
Dry by Machine
N/A
VOC as packaged
VOC as applied
575 - 653 gms/liter (4.8 - 5.4 lbs/gal)
Comments
T O P C O AT S
Limco Direct-to-metal
Light Industrial Topcoat (Limco 5)
Description:
Limco DTM topcoat is a two component, high build, acrylic urethane for topcoating properly
prepared bare steel, aluminum and galvanized substrates. Limco DTM topcoat is a very glossy,
durable and chemically resistant topcoat finish. It has excellent flow, leveling properties and good
sag resistance.
Materials:
Limco Bases:
LB Bases
DTM Mixing Clear: LMC5
Hardeners:
LHF
LHM
LHS
LH710 *
Reducers:
LR10
LR11
LR12
LR13
LR15
Substrates prepared
for topcoating:
Finish Sanding
Cleaner
Steel
80 - 180 grit
Aluminum
120 - 180 grit
Zinc or Galvanized
Coarse scuff pad
(Do not remove zinc or galvanized coating)
Remarks:
area.
Surface cleaning and preparation is critical for Limco DTM Topcoat's success. All grease, dirt and
rust must be removed from substrate.
* Use LH710 DTM Hardener for aluminum substrates.
Agitate thoroughly on a mixing machine before each use.
For custom Limco Direct-to-metal Light Industrial Topcoat (U.S. National Rule) colors, the color
(LB bases) must be mixed 1 part to 1 part of LMC5 by volume prior to addition of hardener and
reducer.
US. Rev. 8/1/13
T E C H N I C A L
D A T A
Limco Direct-to-metal
Light Industrial Topcoat (Limco 5)
S
Mixing ratio:
4:1:1
Color
4 parts Color
Hardener
1 part LHF, LHM, LHS or LH710
Reducer
4 - 5 hours
@ 68°F/20°C
16 - 20 seconds
1.5 mm
9 - 10 psi
Application
Film build
2.0 - 3.0 mils
Coverage
Drying:
68°F/20°C
1.5 - 2 hours dust free
140°F/60°C
30 minutes
N/A
N/A
Sanding:
Wet by Hand
N/A
Dry by Hand
N/A
Dry by Machine
N/A
VOC as packaged
VOC as applied
455 - 491 gms/liter (3.8 - 4.1 lbs/gal)
Comments
T O P C O AT S
Limco Low VOC Industrial
Urethane Single Stage (Limco 7)
Description:
Limco Low VOC Industrial Urethane Single Stage 420 gms/liter (3.5 lbs/gal) VOC is a specially
formulated polyurethane with hardener and accelerator which produces a superior high gloss
durable finish. Limco Low VOC Industrial Urethane Single Stage 420 gms/liter (3.5 lbs/gal) VOC
also available in Quick Mix colors.
Materials:
Limco Bases:
LB Bases
CV Mixing Clear:
LMC7 *
Hardeners:
LHF
LHM
LHS
Reducers:
LR21
LR25
Substrates prepared
for topcoating:
Finish Sanding
Cleaner
400 grit
R-M 909 Final Wipe
R-M 909 Final Wipe
320 - 500 grit
320 - 500 grit
320 - 500 grit
Primer Sealer LP20
Remarks:
area.
* LMC7 available in 5 gallon container only.
For custom Limco Low VOC Industrial Urethane Single Stage (420 gms/liter) colors, the color
(LB, Q bases) must be mixed 2 parts to 1 part of LMC7 by volume prior to addition of hardener
and reducer.
US. Rev. 11/21/14
T E C H N I C A L
D A T A
Limco Low VOC Industrial
Urethane Single Stage (Limco 7)
S
Mixing ratio:
4:1:2
Color
4 parts Color
Hardener
Reducer
4 hours
@ 68°F/20°C
14 - 16 seconds
1.5 - 1.7 mm
10 psi
Application
2 coats (additional mist coat may be required for some metallics)
5 to 10 minutes between coats
Film build
2.0 - 3.0 mils
Coverage
Drying:
68°F/20°C
2 - 3 hours dust free, 8 hours to handle
140°F/60°C
30 minutes
15 - 20 minutes
40 minutes
Sanding:
Wet by Hand
N/A
Dry by Hand
N/A
Dry by Machine
N/A
VOC as packaged
VOC as applied
383 - 419 gms/liter (3.2 - 3.5 lbs/gal)
Comments
T O P C O AT S
Supreme PLUS
Acrylic 1K Single Stage
Description:
Limco Supreme PLUS U.S. National Rule Topcoat is a specially formulated Acrylic 1K Single Stage
system designed to meet the rigorous demands of Refinish, Commercial Vehicle, Agricultural
and Fleet markets. Limco Supreme PLUS U.S. National Rule Acrylic 1K Single Stage Topcoat dries
quickly to a dust-free surface with excellent flow and leveling, good hiding and good gloss.
Materials:
Supreme Bases:
LA & LIB Bases
Supreme Grab & Go Colors:
G Bases
Acrylic 1K Mixing Clear:
LA4999
Reducers:
LR10
LR11
LR12
LR13
LR15
Substrates prepared
for topcoating:
Finish Sanding
500 grit
320 - 500 grit
Primer Surfacer 846
320 - 500 grit
320 - 500 grit
320 - 500 grit
Primer Sealer LP20
Primer Sealer LP620
Primer Sealer LS56
Primer Sealer LS800
Remarks:
area.
For custom Supreme PLUS Acrylic 1K (600 gms/liter) colors, the color (LA, LIB, G bases) must be
mixed 1 part to 1 part of LA4999 by volume prior to addition of reducer.
OPTIONAL: For a more durable finish, Limco Hardener LHF, LHM or LHS may be added at a ratio
of 10:1 with 1 part of reducer. Caution: Lighter colors may yellow with the addition of hardener.
Adding hardener will result in a four hour pot life.
US Rev. 2/22/16
T E C H N I C A L
D A T A
Supreme PLUS
S
Mixing ratio:
8:1
Color
8 parts Color
Reducer
N/A
@ 68°F/20°C
14 - 18 seconds
1.3 - 1.7 mm
6 - 10 psi
Application
2 - 3 wet coats
Film build
2.0 - 3.0 mils
Coverage
270 - 295 sq. ft./gal @ 2.0 mils
Drying:
68°F/20°C
140°F/60°C
2 - 4 hours tack free
30 minutes
N/A
N/A
Sanding:
Wet by Hand
N/A
Dry by Hand
N/A
Dry by Machine
N/A
VOC as packaged
VOC as applied
Comments
For areas requiring recoating four or more hours after application:
Scuff with a fine scuff pad (Scotchbrite #7447).
Cleaning:Use an air blow gun to remove all traces of dust and dirt from the cracks and
surfaces of the vehicle.
Clean all areas to be painted with 139 Final Wipe Cleaner.
T O P C O AT S
Supreme PLUS
Low VOC Acrylic 1K Single Stage
Description:
Limco Supreme PLUS Topcoat 340 gms/liter (2.8 lbs/gal) VOC is a specially formulated Acrylic 1K
Single Stage system designed to meet the rigorous demands of Refinish, Commercial Vehicle,
Agricultural and Fleet markets. Limco Supreme PLUS Acrylic 1K Single Stage Topcoat 340 gms/liter
(2.8 lbs/gal) VOC dries quickly to a dust-free surface with excellent flow and leveling, good hiding
and good gloss.
Materials:
Supreme Bases:
LA & LIB Bases
G Bases
Low VOC Acrylic 1K Mixing Clear:
LA4899
Reducers:
LR21
LR25
Substrates prepared
for topcoating:
Finish Sanding
500 grit
320 - 500 grit
320 - 500 grit
320 - 500 grit
Primer Sealer LP20
Primer Sealer LP610
Primer Sealer LP620
Remarks:
area.
For custom Supreme PLUS Low VOC Acrylic 1K (340 gms/liter) colors, the color (LA, LIB, G bases)
must be mixed 1 part to 2.5 parts of LA4899 by volume prior to addition of reducer.
OPTIONAL: For a more durable finish, Limco Low VOC Hardener LH401, LH405 or LH415 may be
added at a ratio of 10:1 with 1 part of reducer. Caution: Lighter colors may yellow with the addition
of hardener. Adding hardener will result in a four hour pot life.
US Rev. 11/21/14
T E C H N I C A L
D A T A
Supreme PLUS
S
Mixing ratio:
8:1
Color
8 parts Color
Reducer
1 part LR21 or LR25 (may use up to 2 parts of reducer)
N/A
@ 68°F/20°C
14 - 18 seconds
1.3 - 1.7 mm
6 - 10 psi
Application
2 - 3 wet coats
Film build
2.0 - 3.0 mils
Coverage
262 - 285 sq. ft./gal @ 2.0 mils
Drying:
68°F/20°C
140°F/60°C
30 minutes
N/A
N/A
Sanding:
Wet by Hand
N/A
Dry by Hand
N/A
Dry by Machine
N/A
VOC as packaged
VOC as applied
Comments
T O P C O AT S
Supreme PLUS
Description:
and good gloss.
Materials:
Supreme Bases:
LA & LIB Bases
G Bases
Low VOC Acrylic 1K Mixing Clear:
LA4899
Reducers:
LR10
LR11
LR12
LR13
LR15
Substrates prepared
for topcoating:
Finish Sanding
500 grit
320 - 500 grit
320 - 500 grit
320 - 500 grit
Primer Sealer LP20
Primer Sealer LP610
Primer Sealer LP620
Remarks:
area.
must be mixed 1 part to 2.5 parts of LA4899 by volume prior to addition of reducer.
OPTIONAL: For a more durable finish, Limco Low VOC Hardener LH401, LH405 or LH415 may be
added at a ratio of 10:1 with 1 part of reducer. Caution: Lighter colors may yellow with the addition
of hardener. Adding hardener will result in a four hour pot life.
US Rev. 11/21/14
T E C H N I C A L
D A T A
Supreme PLUS
S
Mixing ratio:
8:1
Color
8 parts Color
Reducer
N/A
@ 68°F/20°C
14 - 18 seconds
1.3 - 1.7 mm
6 - 10 psi
Application
2 - 3 wet coats
Film build
2.0 - 3.0 mils
Coverage
262 - 285 sq. ft./gal @ 2.0 mils
Drying:
68°F/20°C
140°F/60°C
30 minutes
N/A
N/A
Sanding:
Wet by Hand
N/A
Dry by Hand
N/A
Dry by Machine
N/A
VOC as packaged
VOC as applied
Comments
T O P C O AT S
Supreme PLUS
Description:
Limco Supreme PLUS U.S. National Rule Topcoat is a specially formulated Acrylic 2K Single Stage
system designed to meet the rigorous demands of Refinish, Commercial Vehicle, Agricultural and
Fleet markets. Limco Supreme PLUS U.S. National Rule Acrylic 2K Single Stage Topcoat dries quickly
to a dust-free surface with excellent flow and leveling, good hiding and mirror-like gloss. The
Supreme PLUS U.S. National Rule Acrylic 2K Single Stage Topcoat film is also chemically resistant
and has superior hardness.
Materials:
Supreme Bases:
LA & LIB Bases
G Bases
LA3899
Hardeners:
LHF
LHM
LHS
Reducers:
LR10
LR11
LR12
LR13
LR15
Substrates prepared
for topcoating:
Finish Sanding
500 grit
320 - 500 grit
Primer Surfacer 846
320 - 500 grit
320 - 500 grit
320 - 500 grit
Primer Sealer LP20
Primer Sealer LP620
Primer Sealer LS56
Primer Sealer LS800
Remarks:
area.
For custom Supreme PLUS Acrylic 2K (600 gms/liter) colors, the color (LA, LIB, G bases) must be
mixed 1 part to 1 part of LA3899 by volume prior to addition of hardener and reducer.
US Rev. 2/10/16
T E C H N I C A L
D A T A
Supreme PLUS
S
Mixing ratio:
8:1:1
Color
8 parts Color
Hardener
Reducer
2 - 4 hours
@ 68°F/20°C
14 - 16 seconds
1.3 - 1.7 mm
6 - 10 psi
Application
2 - 3 wet coats
Film build
2.0 - 3.0 mils
Coverage
305 - 333 sq. ft./gal @ 2.0 mils
Drying:
68°F/20°C
30 - 45 minutes dust free; 4 - 6 hours tack free
140°F/60°C
30 minutes
N/A
N/A
Sanding:
Wet by Hand
N/A
Dry by Hand
N/A
Dry by Machine
N/A
VOC as packaged
VOC as applied
Comments
T O P C O AT S
Supreme PLUS
Description:
and mirror-like gloss. The Supreme PLUS Acrylic 2K Single Stage Topcoat 340 gms/liter (2.8 lbs/gal)
VOC film is also chemically resistant and has superior hardness.
Materials:
Supreme Bases:
LA & LIB Bases
G Bases
LA3899
Hardeners:
LH401
LH405
LH415
Reducers:
LR21
LR25
Substrates prepared
for topcoating:
Finish Sanding
500 grit
320 - 500 grit
320 - 500 grit
320 - 500 grit
Primer Sealer LP20
Primer Sealer LP610
Primer Sealer LP620
Remarks:
area.
must be mixed 1 part to 2.5 parts of LA3899 by volume prior to addition of hardener and reducer.
US Rev. 11/21/14
T E C H N I C A L
D A T A
Supreme PLUS
S
Mixing ratio:
8:1:1
Color
8 parts Color
Hardener
Reducer
1 part LR21 or LR25 (may use up to 2 parts of reducer)
2 - 3 hours
@ 68°F/20°C
14 - 18 seconds
1.3 - 1.7 mm
6 - 10 psi
Application
2 - 3 wet coats
Film build
2.0 - 3.0 mils
Coverage
278 - 300 sq. ft./gal @ 2.0 mils
Drying:
68°F/20°C
LH401: 25 - 30 minutes dust free; 2 hours tack free (depending on reducer)
LH405: 60 - 70 minutes dust free; 4 hours tack free (depending on reducer)
140°F/60°C
30 minutes
N/A
N/A
Sanding:
Wet by Hand
N/A
Dry by Hand
N/A
Dry by Machine
N/A
VOC as packaged
VOC as applied
Comments
T O P C O AT S
Supreme PLUS
Description:
and mirror-like gloss. The Supreme PLUS Acrylic 2K Single Stage Topcoat 420 gms/liter (3.5 lbs/gal)
Materials:
Supreme Bases:
LA & LIB Bases
G Bases
LA3899
Hardeners:
LH401
LH405
LH415
Reducers:
LR10
LR11
LR12
LR13
LR15
Substrates prepared
for topcoating:
Finish Sanding
500 grit
320 - 500 grit
320 - 500 grit
320 - 500 grit
Primer Sealer LP20
Primer Sealer LP610
Primer Sealer LP620
Remarks:
area.
must be mixed 1 part to 2.5 parts of LA3899 by volume prior to addition of hardener and reducer.
US Rev. 11/21/14
T E C H N I C A L
D A T A
Supreme PLUS
S
Mixing ratio:
8:1:1
Color
8 parts Color
Hardener
Reducer
2 - 3 hours
@ 68°F/20°C
14 - 18 seconds
1.3 - 1.7 mm
6 - 10 psi
Application
2 - 3 wet coats
Film build
2.0 - 3.0 mils
Coverage
278 - 300 sq. ft./gal @ 2.0 mils
Drying:
68°F/20°C
35 - 45 minutes dust free: 4 - 6 hours tack free
140°F/60°C
30 minutes
N/A
N/A
Sanding:
Wet by Hand
N/A
Dry by Hand
N/A
Dry by Machine
N/A
VOC as packaged
VOC as applied
Comments
T O P C O AT S
Supreme PLUS
Urethane Single Stage
U.S. National Rule VOC with LA2799
Description:
Limco Supreme PLUS U.S. National Rule Topcoat is a specially formulated 2K Urethane Single Stage
Fleet markets. Limco Supreme PLUS U.S. National Rule Urethane Single Stage Topcoat dries quickly
Supreme PLUS U.S. National Rule Urethane Single Stage Topcoat film is also chemically resistant
Materials:
Supreme Bases:
LA & LIB Bases
G Bases
Urethane Mixing Clear:
LA2799
Hardeners:
LHF
LHM
LHS
Reducers:
LR10
LR11
LR12
LR13
LR15
Flex Agent:
892
Substrates prepared
for topcoating:
Finish Sanding
500 grit
320 - 500 grit
Primer Surfacer 846
320 - 500 grit
320 - 500 grit
320 - 500 grit
Primer Sealer LP20
Primer Sealer LP620
Primer Sealer LS56
Primer Sealer LS800
Remarks:
area.
For custom Supreme PLUS Urethane Single Stage (U.S. National Rule) colors, the color (LA, LIB,
G bases) must be mixed 2 parts to 1 part of LA2799 by volume prior to addition of hardener and
reducer.
US Rev. 2/22/16
T E C H N I C A L
D A T A
Supreme PLUS
Flexed
S
Mixing ratio:
4:1:2
8:3:2:2
Color
4 parts Color
8 parts Color
Hardener
Flex Agent
—
2 part 892
Reducer
2 parts LR10, LR11, LR12, LR13 or LR15
4 hours
4 hours
@ 68°F/20°C
16 - 18 seconds
16 - 18 seconds
1.3 - 1.5 mm
1.3 - 1.5 mm
6 - 10 psi
6 - 10 psi
Application
2 - 3 wet coats
2 - 3 wet coats
Film build
2.0 - 3.0 mils
2.0 - 3.0 mils
Coverage
575 - 625 sq. ft./gal @ 1.0 mil
700 - 750 sq. ft./gal @ 1.0 mil
68°F/20°C
3 - 4 hours dust free;
8 - 10 hours to handle
140°F/60°C
30 minutes
30 minutes
N/A
N/A
N/A
N/A
Wet by Hand
N/A
N/A
Dry by Hand
N/A
N/A
Dry by Machine
N/A
N/A
VOC as packaged
VOC as applied
Comments
Drying:
Sanding:
T O P C O AT S
Supreme PLUS
Description:
Limco Supreme PLUS U.S. National Rule Topcoat is a specially formulated 2K Urethane Single Stage
Fleet markets. Limco Supreme PLUS U.S. National Rule Urethane Single Stage Topcoat dries quickly
Supreme PLUS U.S. National Rule Urethane Single Stage Topcoat film is also chemically resistant
Materials:
Supreme Bases:
LA & LIB Bases
G Bases
Urethane Single Stage Mixing Clear:
LA2999
LA2999S (Slow)
Hardeners:
LHF
LHM
LHS
Reducers:
LR10
LR11
LR12
LR13
LR15
Flex Agent:
892
Substrates prepared
for topcoating:
Finish Sanding
500 grit
320 - 500 grit
Primer Surfacer 846
320 - 500 grit
320 - 500 grit
320 - 500 grit
Primer Sealer LP20
Primer Sealer LP620
Primer Sealer LS56
Primer Sealer LS800
Remarks:
area.
For custom Supreme PLUS Urethane Single Stage (U.S. National Rule) colors, the color (LA, LIB,
G bases) must be mixed 1 part to 1 part of LA2999 by volume prior to addition of hardener and
reducer.
For larger areas, use LA2999S for slower application properties.
US Rev. 8/4/15
T E C H N I C A L
D A T A
Supreme PLUS
Flexed
S
Mixing ratio:
4:1:2
4:1:1:1
Color
4 parts Color
4 parts Color
Hardener
Flex Agent
—
1 part 892
Reducer
1 - 1.5 hours
3 - 4 hours with LA2999S
1 - 1.5 hours
3 - 4 hours with LA2999S
@ 68°F/20°C
16 - 18 seconds
16 - 18 seconds
1.3 - 1.5 mm
1.3 - 1.5 mm
6 - 10 psi
6 - 10 psi
Application
2 - 3 wet coats
2 - 3 wet coats
Film build
2.0 - 3.0 mils
2.0 - 3.0 mils
Coverage
575 - 625 sq. ft./gal @ 1.0 mil
700 - 750 sq. ft./gal @ 1.0 mil
68°F/20°C
1 - 1.5 hours
with LA2999S:3 - 4 hours dust free;
8 hours to handle
1 - 1.5 hours
with LA2999S:3 - 4 hours dust free;
8 hours to handle
140°F/60°C
30 minutes
30 minutes
N/A
N/A
N/A
N/A
Wet by Hand
N/A
N/A
Dry by Hand
N/A
N/A
Dry by Machine
N/A
N/A
VOC as packaged
VOC as applied
Comments
Drying:
Sanding:
T O P C O AT S
Supreme PLUS
Low VOC Urethane Single Stage
340 gms/liter (2.8 lbs/gal) VOC with LA2799
Description:
Limco Supreme PLUS Topcoat 340 gms/liter (2.8 lbs/gal) VOC is a specially formulated 2K Urethane
Agricultural and Fleet markets. Limco Supreme PLUS Urethane Single Stage Topcoat 340 gms/liter
and mirror-like gloss. The Supreme PLUS Urethane Single Stage Topcoat 340 gms/liter (2.8 lbs/gal)
Materials:
Supreme Bases:
LA & LIB Bases
G Bases
LA2799
Hardeners:
LH601
LH604
LH606
Reducers:
LR21
LR25
Flex Agent:
892
Substrates prepared
for topcoating:
Finish Sanding
500 grit
320 - 500 grit
320 - 500 grit
320 - 500 grit
Primer Sealer LP20
Primer Sealer LP610
Primer Sealer LP620
Remarks:
area.
For custom Supreme PLUS Low VOC Urethane Single Stage (340 gms/liter) colors, the color (LA,
LIB, G bases) must be mixed 1 part to 1 part of LA2799 by volume prior to addition of hardener
and reducer.
US Rev. 2/24/16
T E C H N I C A L
D A T A
Supreme PLUS
Flexed
S
Mixing ratio:
4:1:2
8:3:2:2
Color
4 parts Color
8 parts Color
Hardener
3 parts LH601, LH604 or LH606
Flex Agent
—
2 parts 892
Reducer
4 hours
4 hours
@ 68°F/20°C
16 - 18 seconds
16 - 18 seconds
1.3 - 1.5 mm
1.3 - 1.5 mm
6 - 10 psi
6 - 10 psi
Application
2 - 3 wet coats
2 - 3 wet coats
Film build
2.0 - 3.0 mils
2.0 - 3.0 mils
Coverage
600 - 650 sq. ft./gal @ 1.0 mil
690 - 730 sq. ft./gal @ 1.0 mil
68°F/20°C
140°F/60°C
30 minutes
30 minutes
N/A
N/A
N/A
N/A
Wet by Hand
N/A
N/A
Dry by Hand
N/A
N/A
Dry by Machine
N/A
N/A
VOC as packaged
VOC as applied
Comments
Drying:
Sanding:
T O P C O AT S
Supreme PLUS
Description:
Materials:
Supreme Bases:
LA & LIB Bases
G Bases
Mixing Clear:
LA2899
Hardeners:
LH401
LH405
LH415
Reducers:
LR21
LR25
Flex Agent:
892
Substrates prepared
for topcoating:
Finish Sanding
500 grit
320 - 500 grit
320 - 500 grit
320 - 500 grit
Primer Sealer LP20
Primer Sealer LP610
Primer Sealer LP620
Remarks:
area.
For custom Supreme PLUS Low VOC Urethane Single Stage (340 gms/liter) colors, the color (LA,
LIB, G bases) must be mixed 1 part to 2 parts of LA2899 by volume prior to addition of hardener
and reducer.
US Rev. 8/4/15
T E C H N I C A L
D A T A
Supreme PLUS
Flexed
S
Mixing ratio:
8:2:2
8:3:2:2
Color
8 parts Color
8 parts Color
Hardener
Flex Agent
—
2 parts 892
Reducer
1 - 1.5 hours
1 - 1.5 hours
@ 68°F/20°C
16 - 18 seconds
16 - 18 seconds
1.3 - 1.5 mm
1.3 - 1.5 mm
6 - 10 psi
6 - 10 psi
Application
2 - 3 wet coats
2 - 3 wet coats
Film build
2.0 - 3.0 mils
2.0 - 3.0 mils
Coverage
600 - 650 sq. ft./gal @ 1.0 mil
690 - 730 sq. ft./gal @ 1.0 mil
68°F/20°C
1 hour
1 hour
140°F/60°C
30 minutes
30 minutes
N/A
N/A
N/A
N/A
Wet by Hand
N/A
N/A
Dry by Hand
N/A
N/A
Dry by Machine
N/A
N/A
VOC as packaged
VOC as applied
Comments
Drying:
Sanding:
T O P C O AT S
Supreme PLUS
Description:
Materials:
Supreme Bases:
LA & LIB Bases
G Bases
LA2799
Hardeners:
LH401
LH405
LH415
Reducers:
LR21
LR25
Flex Agent:
892
Substrates prepared
for topcoating:
Finish Sanding
500 grit
320 - 500 grit
320 - 500 grit
320 - 500 grit
Primer Sealer LP20
Primer Sealer LP610
Primer Sealer LP620
Remarks:
area.
For custom Supreme PLUS Low VOC Urethane Single Stage (420 gms/liter) colors, the color
(LA, LIB, G bases) must be mixed 2 parts to 1 part of LA2799 by volume prior to addition of hardener
and reducer.
US Rev. 2/22/16
T E C H N I C A L
D A T A
Supreme PLUS
Flexed
S
Mixing ratio:
4:1:2
8:3:2:2
Color
4 parts Color
8 parts Color
Hardener
Flex Agent
—
2 parts 892
Reducer
1 - 1.5 hours
1 - 1.5 hours
@ 68°F/20°C
16 - 18 seconds
16 - 18 seconds
1.3 - 1.5 mm
1.3 - 1.5 mm
6 - 10 psi
6 - 10 psi
Application
2 - 3 wet coats
2 - 3 wet coats
Film build
2.0 - 3.0 mils
2.0 - 3.0 mils
Coverage
600 - 650 sq. ft./gal @ 1.0 mil
690 - 730 sq. ft./gal @ 1.0 mil
68°F/20°C
140°F/60°C
30 minutes
30 minutes
N/A
N/A
N/A
N/A
Wet by Hand
N/A
N/A
Dry by Hand
N/A
N/A
Dry by Machine
N/A
N/A
VOC as packaged
VOC as applied
Comments
Drying:
Sanding:
T O P C O AT S
Supreme PLUS
Description:
Materials:
Supreme Bases:
LA & LIB Bases
G Bases
Mixing Clear:
LA2899
Hardeners:
LH401
LH405
LH415
Reducers:
LR10
LR11
LR12
LR13
LR15
Flex Agent:
892
Substrates prepared
for topcoating:
Finish Sanding
500 grit
320 - 500 grit
320 - 500 grit
320 - 500 grit
Primer Sealer LP20
Primer Sealer LP610
Primer Sealer LP620
Remarks:
area.
For custom Supreme PLUS Low VOC Urethane Single Stage (420 gms/liter) colors, the color
(LA, LIB, G bases) must be mixed 1 part to 2 parts of LA2899 by volume prior to addition of hardener
and reducer.
US Rev. 8/4/15
T E C H N I C A L
D A T A
Supreme PLUS
Flexed
S
Mixing ratio:
8:2:1
8:3:2:2
Color
8 parts Color
8 parts Color
Hardener
Flex Agent
—
2 parts 892
Reducer
1 - 1.5 hours
1 - 1.5 hours
@ 68°F/20°C
16 - 18 seconds
16 - 18 seconds
1.3 - 1.5 mm
1.3 - 1.5 mm
6 - 10 psi
6 - 10 psi
Application
2 - 3 wet coats
2 - 3 wet coats
Film build
2.0 - 3.0 mils
2.0 - 3.0 mils
Coverage
600 - 650 sq. ft./gal @ 1.0 mil
690 - 730 sq. ft./gal @ 1.0 mil
68°F/20°C
1 hour
1 hour
140°F/60°C
30 minutes
30 minutes
N/A
N/A
N/A
N/A
Wet by Hand
N/A
N/A
Dry by Hand
N/A
N/A
Dry by Machine
N/A
N/A
VOC as packaged
VOC as applied
Comments
Drying:
Sanding:
T O P C O AT S
Supreme PLUS
Basecoat
Description:
Limco Supreme PLUS U.S. National Rule Basecoat is a Basecoat/Clearcoat system that features high
strength, fast hiding basecoat colors and a very durable clearcoat. This system can be used for the
repair of original basecoat/clearcoat finishes or for a complete paint job.
Materials:
Supreme Bases:
LA & LIB Bases
G Bases
Basecoat Mixing Clear:
LA1399
Reducers:
LR10
LR11
LR12
LR13
LR15
Substrates prepared
for topcoating:
Finish Sanding
500 grit
320 - 500 grit
Primer Surfacer 846
320 - 500 grit
320 - 500 grit
320 - 500 grit
Primer Sealer LP20
Primer Sealer LP620
Primer Sealer LS56
Primer Sealer LS800
Clearcoats:
LC4100
LC4500
Remarks:
area.
For custom Supreme PLUS Basecoat (U.S. National Rule) colors, the color (LA, LIB, G bases) must be
mixed 2 parts to 1 part of LA1399 by volume prior to addition of reducer.
US Rev. 11/21/14
T E C H N I C A L
D A T A
Supreme PLUS
Basecoat
S
Mixing ratio:
2:1
Color
2 parts Color
Reducer
N/A
@ 68°F/20°C
14 - 16 seconds
1.3 - 1.5 mm
6 - 10 psi
Application
2 - 3 wet coats
Film build
0.5 - 1.5 mils
Coverage
275 - 410 sq. ft./gal @ 1.0 mil
Drying:
68°F/20°C
15 - 30 minutes before clearcoating
140°F/60°C
10 minutes
N/A
N/A
Sanding:
Wet by Hand
N/A
Dry by Hand
N/A
Dry by Machine
N/A
VOC as packaged
VOC as applied
Comments
T O P C O AT S
Supreme PLUS
Low VOC Basecoat
Description:
Limco Supreme PLUS Low VOC Basecoat is a Basecoat/Clearcoat system that features high strength,
fast hiding basecoat colors and a very durable clearcoat. This system can be used for the repair of
original basecoat/clearcoat finishes or for a complete paint job.
Materials:
Supreme Bases:
LA & LIB Bases
G Bases
Low VOC
Basecoat Mixing Clear:
LA1299
Hardeners:
LH401
LH405
LH415
Reducers:
LR21
LR25
Substrates prepared
for topcoating:
Finish Sanding
500 grit
320 - 500 grit
320 - 500 grit
320 - 500 grit
Primer Sealer LP20
Primer Sealer LP610
Primer Sealer LP620
Clearcoats:
LC4200
LC4800
Remarks:
area.
For custom Supreme PLUS Low VOC Basecoat (420 gms/liter) colors, the color (LA, LIB, G bases)
must be mixed 1 part to 2 parts of LA1299 by volume prior to addition of hardener and reducer.
US Rev. 11/21/14
T E C H N I C A L
D A T A
Supreme PLUS
Low VOC Basecoat
S
Mixing ratio:
3:1 + 3%
Color
3 parts Color
Reducer
1 - 2 parts LR21 or LR25
Hardener
3% LH401, LH405 or LH415
N/A
@ 68°F/20°C
14 - 16 seconds
1.3 - 1.5 mm
6 - 10 psi
Application
2 - 3 wet coats
Film build
0.8 - 1.2 mils
Coverage
275 - 430 sq. ft./gal @ 1.0 mil
Drying:
68°F/20°C
15 - 30 minutes before clearcoating
140°F/60°C
10 minutes
N/A
N/A
Sanding:
Wet by Hand
N/A
Dry by Hand
N/A
Dry by Machine
N/A
VOC as packaged
VOC as applied
Comments
T O P C O AT S
Supreme PLUS
2K Direct-to-metal
Description:
Limco Supreme PLUS U.S. National Rule 2K Direct-to-metal Topcoat is a two component, high build,
acrylic urethane for topcoating properly prepared bare steel, aluminum and galvanized substrates.
Limco Supreme PLUS 2K Direct-to-metal topcoat is a very glossy, durable and chemically resistant
topcoat finish. It has excellent flow, leveling properties and good sag resistance.
Materials:
Supreme Bases:
LA & LIB Bases
G Bases
DTM Mixing Clear:
LA5999
Hardener:
LH710
Reducers:
LR10
LR11
LR12
LR13
LR15
Substrates prepared
for topcoating:
Cleaning Finish Sanding
Steel
80 - 180 grit
Aluminum
Zinc or Galvanized
Coarse scuff pad
Second Cleaning
NOTES: Make sure sanding is not so vigorous that it removes the galvanized or zinc coating.
With the second cleaning, make sure all residue is removed.
Remarks:
area.
Surface cleaning and preparation is critical for Limco Supreme PLUS 2K Direct-to-metal Topcoat's
success. All grease, dirt and rust must be removed from substrate.
For custom Supreme PLUS 2K Direct-to-metal (U.S. National Rule) colors, the color (LA, LIB, G bases)
US. Rev. 11/21/14
T E C H N I C A L
D A T A
Supreme PLUS
2K Direct-to-metal
S
Mixing ratio:
4:1:1
Color
4 parts Color
Hardener
1 part LH710
Reducer
4 hours
@ 68°F/20°C
14 - 18 seconds
1.3 - 1.7 mm
6 - 10 psi
Application
2 - 3 wet coats
Film build
2.0 - 3.0 mils
Coverage
275 - 295 sq. ft./gal @ 2.0 mils
Drying:
68°F/20°C
25 - 30 minutes dust free; 2 hours tack free (depending on reducer)
140°F/60°C
30 minutes
N/A
N/A
Sanding:
Wet by Hand
N/A
Dry by Hand
N/A
Dry by Machine
N/A
VOC as packaged
VOC as applied
Comments
T O P C O AT S
Supreme PLUS
2K Direct-to-metal
Description:
Limco Supreme PLUS 2K Direct-to-metal Topcoat 420 gms/liter (3.5 lbs/gal) VOC is a two component,
high build, acrylic urethane for topcoating properly prepared bare steel, aluminum and galvanized
substrates. Limco Supreme PLUS 2K Direct-to-metal Topcoat 420 gms/liter (3.5 lbs/gal) VOC is a very
glossy, durable and chemically resistant topcoat finish. It has excellent flow, leveling properties
and good sag resistance.
Materials:
Supreme Bases:
LA & LIB Bases
G Bases
DTM Mixing Clear:
LA5999
Hardener:
LH710
Reducers:
LR21
LR25
Substrates prepared
for topcoating:
Cleaning
Finish Sanding
Second Cleaning
Steel
R-M 909 Final Wipe
80 - 180 grit
R-M 909 Final Wipe
Aluminum
R-M 909 Final Wipe
120 - 180 grit
R-M 909 Final Wipe
Zinc or Galvanized
R-M 909 Final Wipe
Coarse scuff pad
R-M 909 Final Wipe
NOTES: Make sure sanding is not so vigorous that it removes the galvanized or zinc coating.
With the second cleaning, make sure all residue is removed.
Remarks:
area.
Surface cleaning and preparation is critical for Limco Supreme PLUS 2K Direct-to-metal Topcoat's
success. All grease, dirt and rust must be removed from substrate.
For custom Supreme PLUS 2K Direct-to-metal (420 gms/liter) colors, the color (LA, LIB, G bases)
US. Rev. 11/21/14
T E C H N I C A L
D A T A
Supreme PLUS
2K Direct-to-metal
S
Mixing ratio:
4:1:1
Color
4 parts Color
Hardener
1 part LH710
Reducer
1 part LR21 or LR25
4 hours
@ 68°F/20°C
14 - 18 seconds
1.3 - 1.7 mm
6 - 10 psi
Application
2 - 3 wet coats
Film build
2.0 - 3.0 mils
Coverage
275 - 295 sq. ft./gal @ 2.0 mils
Drying:
68°F/20°C
25 - 30 minutes dust free; 2 hours tack free (depending on reducer)
140°F/60°C
30 minutes
N/A
N/A
Sanding:
Wet by Hand
N/A
Dry by Hand
N/A
Dry by Machine
N/A
VOC as packaged
VOC as applied
Comments
C L E A R C O AT S
LC4000 Clearcoat
Description:
Limco LC4000 Clearcoat is an acrylic urethane clear for use over Limco Basecoat (Limco 4) colors.
It is designed to increase the profitability and productivity of the repair facility. It is U.S. National
Rule compliant, easy to apply and has excellent gloss and leveling.
Materials:
Clearcoat:
LC4000
Hardeners:
LHF
LHM
LHS
Flex Agent:
892
Basecoat:
Remarks:
area.
LC4000 is not covered by a warranty and should not be used with warrantable systems.
US Rev. 8/1/13
T E C H N I C A L
D A T A
LC4000 Clearcoat
Flexed
S
Mixing ratio:
4:1
4:2:1
Clear
4 parts LC4000
4 parts LC4000
Hardener
Flex Agent
—
1 part 892
6 hours
4 hours
@ 68°F/20°C
14 - 16 seconds
15 - 17 seconds
1.1 - 1.3 mm
1.1 - 1.3 mm
9 - 10 psi
9 - 10 psi
Application
2 - 3 coats
2 - 3 coats
Film build
2.0 - 2.4 mils
2.0 - 2.4 mils
Coverage
68°F/20°C
30 minutes dust free;
8 hours to handle
8 hours to handle
140°F/60°C
30 minutes; must allow 5 minutes
flash before force dry
6 - 8 minutes
6 - 8 minutes
N/A
N/A
Wet by Hand
1200 or Finer
1200 or Finer
Dry by Hand
1200 or Finer
1200 or Finer
Dry by Machine
1200 or Finer
1200 or Finer
VOC as packaged
VOC as applied
Comments
Drying:
Sanding:
C L E A R C O AT S
Description:
Limco LC4100 High Solids Clearcoat is a U.S. National Rule Compliant acrylic urethane clear for
use over Limco Basecoat (Limco 4) and Supreme PLUS Basecoat colors. It is designed to increase
the profitability and productivity of the repair facility. LC4100 is an easy to apply two coat clear
that has excellent gloss and leveling. LC4100 offers a range of reducers to meet your temperature
needs.
Materials:
Clearcoat:
LC4100
Hardeners:
LHF
LHM
LHS
Reducers:
LR10
LR11
LR12
LR13
LR15
LR21
LR25
Flex Agent:
892
Basecoats:
Remarks:
area.
US Rev. 11/21/14
T E C H N I C A L
D A T A
Flexed *
S
Mixing ratio:
8:2:1
4:1:1
4:2:1:1
Clear
8 parts LC4100
4 parts LC4100
4 parts LC4100
Hardener
Reducer
1 part LR10, LR11, LR12,
LR13 or LR15
1 part LR21 or LR25
1 part LR10, LR11, LR12,
LR13 or LR15
Flex Agent
—
—
1 part 892
4 hours
5 hours
3 hours
@ 68°F/20°C
14 - 16 seconds
14 - 16 seconds
15 - 17 seconds
1.1 - 1.3 mm
1.1 - 1.3 mm
1.1 - 1.3 mm
9 - 10 psi
9 - 10 psi
9 - 10 psi
Application
2 coats
2 coats
2 coats
5 - 10 minutes
between coats
5 - 10 minutes
between coats
5 - 10 minutes
between coats
Film build
2.0 - 3.0 mils
2.0 - 2.4 mils
2.0 - 3.0 mils
Coverage
68°F/20°C
8 hours to handle
8 hours to handle
8 hours to handle
140°F/60°C
30 minutes; must allow
force dry
force dry
force dry
6 - 10 minutes
6 - 10 minutes
6 - 10 minutes
N/A
N/A
N/A
Wet by Hand
1200 or Finer
1200 or Finer
1200 or Finer
Dry by Hand
1200 or Finer
1200 or Finer
1200 or Finer
Dry by Machine
1200 or Finer
1200 or Finer
1200 or Finer
VOC as packaged
VOC as applied
Comments
Drying:
Sanding:
* Mixing with flex agent will alter dry times and viscosity.
C L E A R C O AT S
Description:
Limco LC4200 Clearcoat is a low 250 gms/liter (2.1 lbs/gal) VOC acrylic urethane clearcoat for use
over Supreme PLUS Low VOC Basecoat colors. LC4200 is easy to apply and has excellent gloss and
leveling.
Materials:
Clearcoat:
LC4200
Hardeners:
LH401
LH405
LH415
Flex Agent:
892
Basecoat:
Remarks:
area.
US Rev. 11/21/14
T E C H N I C A L
D A T A
LC4200 Clearcoat
Flexed
S
Mixing ratio:
4:1
8:2:1
Clear
4 parts LC4200
8 parts LC4200
Hardener
Flex Agent
—
1 part 892
1.5 hours
1.5 hours
@ 68°F/20°C
15 - 17 seconds
15 - 17 seconds
1.1 - 1.3 mm
1.1 - 1.3 mm
9 - 10 psi
9 - 10 psi
Application
2 - 3 coats
2 - 3 coats
Film build
2.0 - 2.4 mils
2.0 - 2.4 mils
Coverage
68°F/20°C
8 hours to handle
8 hours to handle
140°F/60°C
6 - 10 minutes
6 - 10 minutes
N/A
N/A
Wet by Hand
1200 or Finer
1200 or Finer
Dry by Hand
1200 or Finer
1200 or Finer
Dry by Machine
1200 or Finer
1200 or Finer
VOC as packaged
VOC as applied
Comments
Drying:
Sanding:
C L E A R C O AT S
Description:
Limco LC4500 Express Clear is a U.S. National Rule Compliant acrylic urethane clear for use over Limco
Basecoat (Limco 4) and Supreme PLUS Basecoat colors. It is designed to increase the profitability
and productivity of the repair facility. LC4500 is an easy to apply two coat clear that has excellent
gloss and leveling. LC4500 offers a range of reducers to meet your temperature needs.
Materials:
Clearcoat:
LC4500
Hardeners:
LHF
LHM
LHS
Reducers:
LR10
LR11
LR12
LR13
LR15
Flex Agent:
892
Basecoats:
Remarks:
area.
LC4500 is not covered by a warranty and should not be used with warrantable systems
US Rev. 11/21/14
T E C H N I C A L
D A T A
Flexed
S
Mixing ratio:
8:2:1
4:2:1:1
Clear
8 parts LC4500
4 parts LC4500
Hardener
Reducer
Flex Agent
—
1 part 892
2 - 3 hours
2 hours
@ 68°F/20°C
13 - 15 seconds
12 - 14 seconds
1.1 - 1.3 mm
1.1 - 1.3 mm
9 - 10 psi
9 - 10 psi
Application
2 - 3 coats
2 - 3 coats
Film build
2.0 - 3.0 mils
2.0 - 3.0 mils
Coverage
68°F/20°C
140°F/60°C
30 minutes; may be handled or
polished after cool down
6 - 10 minutes
6 - 10 minutes
N/A
N/A
Wet by Hand
1200 or Finer
1200 or Finer
Dry by Hand
1200 or Finer
1200 or Finer
Dry by Machine
1200 or Finer
1200 or Finer
VOC as packaged
VOC as applied
Comments
Drying:
Sanding:
C L E A R C O AT S
Description:
Limco LC4800 Low 2.0 VOC Express Clear is a two component, 250 gms/liter (2.1 lbs/gal) VOC
compliant fast acrylic urethane clear for use over Supreme PLUS Low VOC Basecoat colors. It is
designed to accommodate fast air-dry and quick bake conditions, increasing the productivity and
profitability for the repair facility. It is ideal for spot and panel repairs with easy application and
good appearance.
Materials:
Clearcoat:
LC4800
Hardeners:
LH401
LH405
LH415
Flex Agent
892
Basecoat:
Remarks:
area.
LC4800 is not covered by a warranty and should not be used with warrantable systems
US Rev. 11/21/14
T E C H N I C A L
D A T A
Flexed
S
Mixing ratio:
4:1
8:2:1
Clear
4 parts LC4800
8 parts LC4800
Hardener
Flex Agent
—
1 part 892
2 - 3 hours
2 - 3 hours
@ 68°F/20°C
13 - 15 seconds
13 - 15 seconds
1.1 - 1.3 mm
1.1 - 1.3 mm
9 - 10 psi
9 - 10 psi
Application
2 wet coats
2 wet coats
Film build
2.0 - 2.5 mils
2.0 - 2.5 mils
Coverage
68°F/20°C
4 hours to handle
20 - 25 minutes dust free
140°F/60°C
8 - 10 minutes
8 - 10 minutes
N/A
N/A
Wet by Hand
1500 or Finer
1500 or Finer
Dry by Hand
1500 or Finer
1500 or Finer
Dry by Machine
1500 or Finer
1500 or Finer
VOC as packaged
VOC as applied
Comments
Drying:
Sanding:
MISCELLANEOUS
892 Flex Agent
Description:
Limco 892 Flex Agent is a urethane additive that gives flexibility to Limco Undercoats, Topcoats and
Clearcoats. Limco 892 is formulated to resist fading, stone chipping and chemical staining while
increasing the durability and flexibility of most interior and exterior parts.
Mixing:
When finishing flexible parts, refer to the appropriate technical data sheets for detailed processing
information.
Undercoat:
• 800K (4 parts 800K: 1 part LH810 or LH820: 1 part 892)
• 800K tinted wet-on-wet sealer (1 part 800K: 1 part LB base without mixing clear; then
4 parts tinted 800K: 1 part LH810 or LH820: 1 part LR21 or LR25: 1 part 892)
• LP610 primer surfacer (4 parts LP610: 1 part LH401, LH405 or LH415: 1 part LR21 or LR25:
1 part 892)
• LP610 sealer (4 parts LP610: 1 part LH401, LH405 or LH415: 2 parts LR21 or LR25:
1 part 892)
• LS800 (4 parts LS800: 1 part 892: then mix according to appropriate tinted or untinted mix
ratio, see LS800 tech sheet for complete mixing instructions.)
Topcoat:
• Limco Acrylic Enamel (Limco 2) (8 parts LB base without mixing clear: 1 part 892; then
8 parts color: 1 part LHF, LHM or LHS: 4 parts LR10, LR11, LR12, LR13 or LR15)
• Limco Urethane (Limco 3) (8 parts color: 1 part LH310 or LH320: 4 parts LR10, LR11, LR12,
LR13 or LR15: 1 part 892)
• Limco Low VOC Urethane (Limco 3) (4 parts color: 1 part LHF, LHM or LHS: 2 parts LR21 or
LR25: 1 part 892)
• Supreme PLUS Urethane Single Stage National Rule (4 parts color: 1 part LHF, LHM or LHS:
1 part 892: 1 part LR10, LR11, LR12, LR13 or LR15)
• Supreme PLUS Low VOC Urethane Single Stage 340 gms/liter (2.8 lbs/gal) VOC (8 parts
color: 3 parts LH401, LH405 or LH415: 2 parts 892: 2 parts LR21 or LR25)
• Supreme PLUS Low VOC Urethane Single Stage 420 gms/liter (3.5 lbs/gal) VOC (8 parts
color: 3 parts LH401, LH405 or LH415: 2 parts 892: 2 parts LR10, LR11, LR12, LR13 or LR15)
Clearcoat:
• LC4000 (4 parts clear: 2 parts LHF, LHM or LHS: 1 part 892)
• LC4100 (4 parts clear: 2 parts LHF, LHM or LHS: 1 part LR10, LR11, LR12, LR13 or LR15:
1 part 892)
• LC4200 (8 parts clear: 2 parts LH401, LH405 or LH415: 1 part 892)
• LC4500 (4 parts clear: 2 parts LHF, LHM or LHS: 1 part LR10, LR11, LR12, LR13 or LR15:
1 part 892)
• LC4800 (8 parts clear: 2 parts LH401, LH405 or LH415: 1 part 892)
Remarks:
area.
For information on preparing plastic parts, refer to “Standard Preparation for Plastic Parts” in the
APPLICATION PROCEDURES section of the Limco Technical Manual.
US Rev. 8/1/13
MISCELLANEOUS
LE800 Fisheye Eliminator
Description:
Limco LE800 Fisheye Eliminator is specially developed for use in Limco Single Stage Topcoats,
Supreme PLUS Single Stage Topcoats and Limco Clearcoats.
Mixing:
Add up to 1 ounce (approximately 28 grams) of Limco LE800 Fisheye Eliminator per ready for use
gallon of topcoats and clearcoats.
Remarks:
area.
Only use if fisheyes or craters are encountered.
DO NOT use in any undercoats or basecoats.
US Rev. 8/1/13
MISCELLANEOUS
LF10 Flattening Agent
Description:
Limco LF10 is a flattening agent that may be added to all Limco Single Stage Topcoats, Supreme
PLUS Single Stage Topcoats and Limco Clearcoats for gloss reduction. Limco LF10 mixes easily and
allows flattening to the extent desired.
Mixing:
Stir product thoroughly for 5 - 10 minutes before using.
Add 25% - 50% of LF10 to the catalyzed (paint and hardener, no reducer) Limco mixture. Additional
reduction is optional.
Ensure proper flash-off periods are observed when spraying flattened products to prevent additional
gloss.
Polishing finishes containing LF10 will cause gloss levels to increase.
Remarks:
area.
DO NOT use LF10 in any Basecoat color.
Cannot be mixed with any Low VOC Limco product and still be VOC compliant.
RFU formulas for Limco Clearcoats are available.
US Rev. 8/18/15

table of contents - coatingsmall.com

Transcription

Similar documents

What is Limco Supreme Plus?

VAPRO IQUI-FLASH

amtech™ am-1250™ direct-to-metal primer

klear koat voc - Custom Match Colors

KILZ COMPLETE® INTERIOR / EXTERIOR OIL

Painting a grener tomorrow-Nerolac-IGBC

Low VOC Product Portfolio BASF`s economical paint solution

Technical Data

AS9100C Quality System

AS9110B - Limco Airepair, Inc.