Flyer Installation and Maintenance
Transcription
Flyer Installation and Maintenance
OPTIMUM PRODUCTS FOR INSTALLATION AND MAINTENANCE INSTALLATION & MAINTENANCE All from a single source! The right installation and maintenance product for every industrial initial coating. Passion for wood INSTALLATION AND MAINTENANCE RANGE OPTIMALLY COORDINATED INSTALLATION AND MAINTENANCE PRODUCTS FOR ALL SITUATIONS In spite of all the care and precautionary measures – sometimes even the best coatings lead to unpredictable damage of the wooden components, e.g. during transportation or installation. Even if it is only a small area of damage, an immediate and professional repair is necessary in order to prevent it from progressing and to preserve the coating, even within the surface warranty. This is precisely why there are optimally attuned products: with the complete installation and maintenance range of the Sikkens Wood Coatings brand, you can correct any damage to your wooden components. Even without damage, we recommend that you maintain your wooden windows at regular intervals. Your advantage: Be it opaque or translucent, the installation and maintenance products are precisely coordinated for the industrial top coat of the Sikkens Wood Coatings brand and, along with the precise colour and luster concordance, also offer a very good adhesion between the top coat and the installation or maintenance coat. From the small spot repair to re-painting the entire weatherboard, you can make use of our tailored qualities in the system all from one source and permanently protect your wooden components. Optimum security from one source by the Sikkens Wood Coatings brand: •Perfectly coordinated with our industrial top coats •Precise colour concordance •Precise luster concordance •Tested adhesion • Market-driven 1 l packaging •Simple colour tinting via the colour-mix system PRODUCT OVERVIEW CETOL® WV 885 BPD+ RUBBOL® WP 105 CETOL® WP 510 RUBBOL® WF 310 Impregnation with blue stain and rotting protection for static non-earthed wooden components not under load, exterior. White primer with isolating properties for the maintenance of wooden parts, outside and inside. Translucent primer for the maintenance of wooden parts, exterior and interior. Semi matt, opaque mid and top coat for the maintenance of wooden parts, exterior and interior. Type of binder: Pure acrylic Application: Dipping, flow coating, brushing Type of binder: Acrylic-alkyd resin Application: Brushing Type of binder: Acrylic copolymer Application: Brushing Type of binder: Pure acrylic Application: Brushing Water-soluble Water-soluble Water-soluble Colours Colourless Colours White Colours Joinery Colour Classics. Other colour shades on request. Colours White similar to RAL 9016 Rubbol Collection and NCS Packsizes 2.5 litres Packsizes 1 litre Packsizes Base TC: 1 liter Packsizes RAL 9016: 1 litre Base W05: 1 litre Base N00: 0.98 litres Colours Colourless Packsizes 1 litre Water-soluble ST 860 Liquid flow additive for the conversion of a water borne translucent spray product into a brushable maintenance coating. Only used for the repair of small damaged areas (spot repair). Processing: Mix ratio 1:10; addition of the additive for a spray product at a ratio of 1 part ST 860 to 10 parts opaque/translucent coating. Good mixing of the mixture. Processing by brushing. Fields of application: For the repair of small damages to newly final coated wooden windows, which occurred during transport or installation (not suitable for renovation of weathered surfaces). Water-soluble Our technical data sheets and safety data sheets can be downloaded at: www.sikkens-wood-coatings.com RUBBOL® WF 318 CETOL® WF 905 CETOL® WF 910 CETOL® WF 915 Satin-gloss, opaque mid and top coat for the maintenance of wooden parts, exterior and interior. Matt, opaque mid and top coat for the maintenance of wooden parts, exterior and interior. Semi-matt, opaque mid and top coat for the maintenance of wooden parts, exterior and interior. Satin-gloss, opaque mid and top coat for the maintenance of wooden parts, exterior and interior. Type of binder: Pure acrylic Application: Brushing Type of binder:Pure acrylic dispersion Application: Brushing Type of binder: Pure acrylic Application: Brushing Type of binder: Pure acrylic Application: Brushing Water-soluble Water-soluble Water-soluble Water-soluble Colours White similar to RAL 9016 Rubbol Collection and NCS Colours Joinery Colour Classics. Other colour shades on request. Colours Joinery Colour Classics. Other colour shades on request. Colours Joinery Colour Classics. Other colour shades on request. Packsizes RAL 9016: 1 litre Base W05: 1 litre Base N00: 0.98 litres Packsizes Base TC: 1 litre Packsizes Base TC: 1 litre Packsizes Base TC: 1 litre The matching quality product can be found on the table below. Top coat, industrial initial coating Matching protection Matching repair coating RUBBOL WF 382/RUBBOL WF 380 ® RUBBOL WP 105 RUBBOL® WF 310 RUBBOL® WF 387/RUBBOL® WF 378 RUBBOL® WP 105 RUBBOL® WF 318 CETOL® WF 952/CETOL® WF 950 CETOL® WP 510 CETOL® WF 910 CETOL® WF 957/CETOL® WF 955 CETOL® WP 510 CETOL® WF 915 CETOL® WF 980 CETOL® WP 510 CETOL® WF 905 ® ® Are you look for renovation products? In the case of damage to the coating you should act quickly to avoid further damage, even after the legal warranty period. Renovation coating is easy with the high-quality products by Sikkens architectural paints, opaque coats and wooden varnishes. Further information can be found at www.sikkens.com GOOD TO KNOW! This is how you make proper use of the maintenance products depending on the type of damage: Condition: small spot damages to the wooden surface Condition: small scratches, hailstone damage or streaks on the wooden surface Condition: deep scratches or lacquer damage upon installation Measure: Spot repair: Product ST 860 Mix ratio: 1:10 (ST 860: Industrial initial coating) Stir mixture well. Lightly abrade the affected area with the non-woven web. Then touch up with a brush. Measure: 1.Sand wooden surface (grit 200-220) 2.Paint 1 x with the right top coat from the maintenance range Measure: 1.Sand wooden surface (grit 200-220) 2.For soft wood, preserve (e.g. with CETOL® WV 885 BPD+) 3.Prime with the right primer from the maintenance range 4.Fill up the defect location with the top coat (paint 3 x with the right top coat from the maintenance range) 5.If required, sand the entire bar and paint again 1 x Cover correctly! Please ensure that windows or outer doors are protected against damage or stains during building, cleaning or painting work. The foil and tape with which frames, sashes and glass are covered and masked must be free of moisture and solvents as well as be UV and weatherproof (our Technology dept. recommends 3M masking tape 244, Kipp special paper 308, Tesa protective tape 4438 UV). Please never leave the wooden elements masked or covered for more than two weeks otherwise moisture could build-up in the wood. This could cause damage to the coating. Safe transportation avoids damage •Upon the order and packaging of the components with foil, it must be ensured that sufficient air can circulate between the components and the foil so that natural drying is not prevented. •For transportation, the wooden windows must be vertically mounted on a fixed substrate. •Sit the windows on joists/palettes and attach them with wooden strips. •The wooden components should overlap a little so that the subsequent foil does not come into contact with the coating. •The foil (e.g. a PE foil) is spread across the entire window package and attached to the strips or below to the joist/palette. •As the windows are in the open for some time before being unpacked, it must be ensured that no water can penetrate the package. •The package must be open at the bottom in order to ensure a slight air exchange and to allow any penetrated water to drain away. In any case, this prevents a build-up of moisture from occurring. Passion for wood Akzo Nobel Industrial Coatings Ltd. Unit 04a, Mercer Way Shadsworth Business Park, Blackburn Lancs, BB1 2QZ · United Kingdom Tel.+44 1254 687 950 Fax+44 1254 687 960 [email protected] www.sikkens-wood-coatings.co.uk With the right products you will be able to enjoy your high-quality wooden windows and exterior doors for a long time. Passion for wood Cleaning and care are essential for maintaining the value of the wooden windows and doors. You can find more information on our care and cleaning products in our care flyer, which you can pass on to your customers for perfect care. Ask your contact person in field sales! AN_200260_050314 01485/03/14/LW/P · MSRP €0.80 · Errors and omissions excepted. PERFECTLY NURTURED OUT OF PASSION FOR WOOD