Install Kit Manual

Transcription

Install Kit Manual
□
□






□
“
□
“
□
□
□












ShaWdirect diGitaL SateLLite tv
dual Satellite installation manual
mULtipLe aWard-WinninG
24/7/365Service
Your simple
Your
simple guide
guide
to simple
to
simple installation.
installation.
Your ultimate television experience is here! Simply follow the steps
outlined in this manual to install your system and you’ll be enjoying
amazing 100% digital satellite TV in no time. Before you begin,
we’d like to better acquaint you with Shaw Direct.
With over 490 channels and growing, including your favourites
in HD, Shaw Direct provides flexible programming options to suit
every customer. We also provide 24/7/365 award-winning customer
support for any of your questions. Our 100% Canadian service team
is happy to help you at one of our three call centres in Calgary,
Mississauga and Montreal.
Here are a few of the great things you'll enjoy as a
Shaw Direct customer:
We also offer accessories to enhance your experience, like:
ShaW direct’S WireLeSS eaSY jacK
Turn any electrical outlet into a phone jack, and connect your
receiver to order Pay Per View movies and events, right from
your remote!
Here’s why it’s handy:
■ caller id/call Waiting compatible
■ Built-in surge protection
■ eliminates the cost and challenge
of hard-wiring a new phone jack
■ a lso works with other devices
such as computers, phones and faxes
When you go on holidays so can your bill, with our seasonal
disconnect program.
If you want to hear about customer offers and promotions, sign-up
for our free email news at ShaWdirect.ca/Scoop. And tune into
channel 299 where you’ll also find technical tips and movie
and sports highlights.
UniQUe eLLipticaL diSh
Welcome to the Shaw Direct family!
taKe a vacation From YoUr BiLL
Get the power of two satellites in one, plus great reception,
rain or shine.
extenSive Free previeWS
Over 30,000 hours of previews per year so you can sample before
you buy.
SimpLe SateLLite™ WarrantY
A lifetime warranty on external equipment.
no LonG-term contractS
You don’t have to worry about a big commitment.
2
1. Getting Started
This Shaw Direct Installation Manual provides all of the
information required to setup your satellite system. The manual
provides step-by-step instructions, however skills in construction,
wiring and assembly will also be required to successfully complete
the installation.
Your Shaw Direct Dish Kit contains the following components:
■ S
haw Direct 60 cm Elliptical Dish with dual satellite hardware
(see images for complete inventory).
60 cm Elliptical Dish
Important: We do not recommend installing the satellite dish on your roof,
unless absolutely necessary. If you choose to mount the dish on the roof,
we strongly recommend consulting a building or construction expert
before installation.
quad lnb
IMPORTANT: Read this manual thoroughly before you start.
WARNING: All satellite dish systems must be properly grounded, particularly
if the dish is close to or above the roof line. Improper grounding can result in
damage or serious personal injury. National, provincial and local electrical
codes may require you to ground the dish directly and to insert a grounding
block in the coaxial cables running from the dish to the receiver inside the
building. Before beginning installation, carefully read the section on grounding
the dish (see section 10).
This installation requires you to:
■ U
se hand tools such as a drill
■ D
etermine whether water pipes, electrical wiring or gas lines
are close to the installation area
■ R
oute coaxial cable through walls and under floors
■ U
se a compass, protractor and carpenter’s level
■ U
se a ladder to climb structures
■ K
now your local, provincial and national grounding codes
If you do not have the experience to perform these tasks,
contact Shaw Direct for assistance.
You will need the following tools:
clamp mount
assembly
10
20
satellite feed
support arm
universal
mount
assembly
60
30
40
50
Hardware
1/4˝x 1-1/2˝ Long Hex Head Bolt
(Feed Support Arm Mounting)
1 Supplied
1/4˝ External Tooth Washer
2 Supplied
1/4˝ x 1-3/4˝ Long Carriage Head Bolt
(Antenna Mounting Bolt - Painted Head)
2 Supplied
1/4˝ Whiz Nut
(Hex Head)
5 Supplied
1/4˝ x 1/2˝ Carriage Head Bolt
(Mast Adjusting Bolts)
2 Supplied
Spacer Sleeve
(Feed Support Arm Mounting)
1 Supplied
Hex Head Hi/Lo Screw
2 Supplied
1/4˝ Flat Washer
3 Supplied
■ #1 Philips screwdriver
■ 7/16 hex wrench, open or combination end
■ Electric drill and bits
■ Carpenter’s level
■ Compass
■ Protractor
If you are installing a 75 cm dish, you will also require:
■ 2 - 13 mm wrenches (one to hold and one to tighten)
■ A wind brace support is recommended for high wind areas
Note: You must use the mast that came with the dish.
3
Key points to remember when installing your Shaw Direct System:
■ D
o not drill any holes until you’ve confirmed the best location for the dish.
■ M
ake sure the installation of the dish conforms to local electrical and
building codes, zoning requirements and other applicable laws and
regulations. If you are unsure, contact a local electrician or building
inspector for assistance.
■ F
or possible periodic removal of snow, choose a site that is easily
accessible.
■ E
nsure there are no visible obstructions between the dish and your line of
sight to the satellites. Keep in mind that trees will grow up and outward and
may eventually block the signal.
■ T he maximum allowable length for the RG-6 coaxial cable connecting
the receiver to your dish is 125 feet. Consult Shaw Direct if the cable will
exceed this length.
■ U
se only RG-6 grade coaxial cable. Using lower grade RG-59 coaxial cable
may result in excessive signal loss and poor reception. Cable grade type is
indicated on the outer jacket of the cable.
Do not install the dish:
■ U
nder power lines
■ W
here it may be easily tampered with
■ W
here it is exposed to high winds, during windy or stormy conditions
We do not recommend:
■ M
ounting the dish on a railing
■ I nstalling the dish on aluminum or vinyl siding (these are unlikely to be
structurally sound)
Keep grounding requirements in mind (see section 10 for additional
information on grounding).
Note: We do not recommend mounting the dish on the roof unless absolutely
necessary. We also recommend that you consult a building expert for future tips
on preventing roof leakage.
3. Dish Assembly
Step 1: To avoid losing any hardware components, select a clear
area for dish assembly.
Step 2: On the Universal Mount, insert the (2) 1/4˝ X 1/2˝ Carriage
Head Bolts (Mast Adjusting Bolts), through the mast and the
curved slot of the mount. Capture with (2) 1/4˝ External Tooth
Washers and (2) 1/4˝ Whiz Nuts. Tighten the bolts just enough to
hold in place (see Figure A).
Figure A
2. Mounting Locations
Your dish will typically be mounted on a solid base. To ensure your
dish doesn’t move in windy conditions, choose a location where it
can be securely fastened. The mounting surface should be rigid
and solid.
IMPORTANT: The Elliptical Dish has a turn radius of +/- 35 degrees. If you are
mounting the dish on the side of your house, check the assembled dish and
mounting pole to see if you can rotate the dish in the desired azimuth setting.
If you can’t rotate the dish, choose an alternate location.
Key things to remember when choosing a mounting location:
■ T he mounting surface should be flat, even and in good condition.
■ I f you install the dish on the roof or side of your house, be sure to attach
the bolts into a building stud, rafter or other solid surface.
■ W
hen mounting on the roof of your house, use an adequate/approved
sealant (for your type of roofing material) around the holes where the base
of the universal mount meets the mounting surface. This will prevent the
roof from leaking. Consult with a roofing expert to confirm best sealant.
Universal
Mount
Assembly
Assemble Mast Adjusting Bolts with Whiz Nut loose
enough to allow movement in curved slot, without
damage to painted surface.
1/4˝ External Tooth Washer,
both sides
Universal
Mount
1/4˝ Whiz Nut
1/4˝ x 1/2˝ Carriage Head Bolt
(Mast Adjusting Bolt)
Step 3: Attach the dish to the Clamp Mount Assembly using the
(2) 1/4˝ X 1-3/4˝ Long Carriage Head Bolts (Antenna Mounting
Bolts-Painted Head), (2) 1/4 Flat Washers and (2) 1/4˝ Whiz Nuts.
Ensure the Center Pivot Pin on the Clamp Mount Assembly is
inserted in the mating hole of the Dish (see Figure B).
4
4. Locating the Satellite
Figure B
1/4˝ x 1 3/4˝ Long
Carriage Head Bolt
(Antenna Mounting Bolt)
Clamp Mount
Assembly
Step 1: Determine the direction in which to point the dish.
The primary satellite (SAT A) is located at 107.3 west longitude; the
secondary satellite (SAT B) will be located at 111.1 west longitude.
1/4˝ Flat Washer
1/4˝ Whiz Nut
IMPORTANT: For dual satellite (elliptical) dish installation, use the SAT B
Azimuth, Elevation and Skew listings in the Dual Satellite Locator Chart at the
back of this manual for the city nearest your location.
10
20
30
40
50
60
Centre Pivot Pin
Dish Socket
Step 4: Before tightening the bolts, adjust the skew alignment to
the 90 degree mark on the Clamp Mount Assembly (see Figure C).
Tighten the bolts just enough to hold in place. You’ll have to make
further adjustments to this setting later.
TIP: Initially setting the skew to 90 degrees will make it easier to
aim the dish.
Figure C
Write them here:
Azimuth
Elevation
Skew
SAT A: _________ SAT A: _________ SAT A: _________
SAT B: _________ SAT B: _________ SAT B: _________
Figure E
Azimuth Clamp Bolts
0
14
Boss Holes
110
10 0
elevation
Skew
Step 2: Use a compass to determine roughly where to point your dish.
90
Skew Adjustment Nuts
SK
60
EW
0
80 7
50
NOTE:
Each Scale mark
is 2 degrees
azimuth
W
12
0
KE
S
13
0
Skew Alignment Mark
40
Step 5: Attach the Feed Support Arm to the dish using the (1) 1/4˝ X
1-1/2˝ Hex Head Bolt (1), Spacer Sleeve, (1) 1/4˝ Flat Washer and
(1) 1/4˝ Whiz Nut, making sure the Feed Support Arm and Spacer
Sleeve are positioned as shown (See Figure D). Position the 2 plastic
cable clips (packaged with the LNB) around the support arm to
secure the coax cable(s) from the LNB to receiver.
Step 3: Choose a dish installation location with a clear line of sight
to both SAT B and SAT A based on the settings you recorded
earlier. There should be no trees, buildings or other obstructions
between the dish and the satellite. Do you have a clear line of sight
to both SAT A and SAT B?
■ I f YES, go to Step 4 and continue with the installation.
■ I f NO, find another location.
■ I f you’re not sure, contact Shaw Direct for more information.
NOTE: To ensure an accurate compass reading, stay away from large metal
objects. To double-check accuracy, take multiple readings several feet apart.
Figure D
Dish Socket
Feed Support Arm
Spacer Sleeve
1/4˝ Whiz Nut
Flat 1/4˝ Washer
1/4˝ x 1 1/2˝ Long Hex Head Bolt
Step 4: At the dish install site, hold a compass level and still in the
palm of your hand. When the needle stops rotating (dark half of the
needle always points north), slowly rotate the body of the compass
so that the “N˝ marking is aligned with the dark half of the needle.
Locate the tick mark on the compass edge corresponding to the
SAT B azimuth number you wrote down earlier (see Figure F). This
is the direction in which to point your dish to receive both SAT A
and SAT B signals.
TIP: Use a stick or other object to mark the correct azimuth direction.
You’ve just finished assembling the dish.
5
0
90
Figure F
Level
Figure H
Not Level
˚
0˚
27
0˚
18
Use bubble level to plumb mast so it is
vertical in all directions.
If you live in Vancouver,
the satellite will be to the Southeast.
If you live in Newfoundland,
the satellite will be to the Southwest.
Step 5: Estimate the SAT B elevation (angle) setting you recorded
earlier, using a protractor if needed (see Figure G). Check any
obstructions at that elevation. If there are obstructions, then select
an alternate location for the dish.
Figure G
Curved Slot
90°
60°
Step 2: Drill holes in the structure on which you are mounting the
dish to match the holes in the base of the Universal Mount.
30°
0°
0 degrees is straight toward the horizon
and 90 degrees is straight upward.
IMPORTANT: When evaluating the install location, make sure there are no trees,
branches or objects visually obstructing the dish and the general direction
of the satellite. Also, keep in mind that trees grow up and outward and may
eventually block the signal.
Step 3: Secure the Universal Mount with appropriate surface screws.
Check the mount for movement. An improperly secured mount will
affect dish performance.
Step 4: Slide the Dish/Clamp Mount Assembly onto the mast by
loosening the (2) Azimuth Clamp Bolts (see Figure C) and the
Elevation Pivot Bolt just enough to slide the assembly until it
makes contact with the Elevation Pivot Bolt (see Figure I). Tighten
the Elevation Pivot Bolt just enough to hold it in place on the mast.
Figure I
You have just completed locating a site for your dish.
5. Attaching the Dish
Step 1: Ensure mast is plumb before drilling any holes. Hold the
Universal Mount in place on the mounting area. Use a carpenter’s
level to plumb the antenna mast’s straight section. If the bubble
levels (horizontal and vertical) are not centered, rotate the mast
(in the curved slot) until it is plumb. Lock it in place by securely
tightening the Mast Adjusting Bolts (see Figure H).
IMPORTANT: Alignment of the dish will be difficult if the mast is not plumb.
Use the metal edge, not the nut or L-bracket to set elevation.
(For example, in this picture, the elevation is set at 26).
Elevation Pivot Bolt
When adjusting
elevation, use edge of metal
to line up with elevation setting
for your area on the elevation scale.
10
20
30
40
50
60
Elevation
Adjustment
Bolt
Elevation
Indicator
10
20
60
30
40
50
Step 5: Loosen the Elevation Adjustment Bolt 1/3 turn from tight
on either side of the Clamp Mount Assembly. Adjust the Clamp
Mount Assembly to the edge of the white indicator line per the
SAT B elevation setting you recorded earlier. Tighten the Elevation
Adjustment Bolt (see Figure I).
Step 6: Attach the Quad Satellite LNB/Feedhorn Clamp Assembly to
the Feed Support Arm. Loosen the Feed Arm screw enough to allow
the clamp to fit snugly into the Feed Support Arm. Securely tighten
the Feed Arm screw.
6
Step 7: Using your compass, point the LNB in the direction
corresponding to the SAT B azimuth setting (see Figure J).
Draw a vertical mark overlapping the Clamp Mount Assembly and
the mast. This mark will provide you with the approximate satellite
location reference point when you are ready to tune to the satellite.
Figure J
Step 1: Connect the RG-6 coaxial cable provided with the install kit
to one of the ports of the QUAD LNB. Connect the other end of the
coaxial cable to the satellite receiver input connector. To make the
dish alignment easier, we suggest you temporarily locate the receiver
and TV at an electrical outlet close to where the dish is installed.
Unless you can view the signal level on the TV screen from where
the dish is being aligned, you will require an assistant to monitor the
signal level reading on the TV as you align the dish.
Step 2: When the receiver is first powered up, it should be tuned to
channel 299. If you are using a legacy receiver and cannot tune to
channel 299, go to channel 284 instead.
Step 8: Loosen the Skew Adjustment Bolts on either side of the Clamp
Mount Assembly. Adjust the Skew Alignment Mark with the scale
indicator to the SAT B skew setting you recorded earlier. Finally, lock
it in place by securely tightening the Skew Adjustment Bolts.
IMPORTANT: Do not make any further adjustments to the Skew Setting from this
point onward.
Step 9: After making the permanent skew adjustment, install the (2)
Hex Head Hi/Lo Screws in the dish boss holes (see Figure C). Four
boss holes are available but you’ll only need to use two (the other
two may be obstructed depending on the skew setting). Do not over
tighten Hi/Lo Screws.
You have just finished attaching the Dish to the Universal Mount.
6. Connecting Receiver and Dish
You are now at the point in the installation where one of the output
ports of the QUAD LNB needs to be connected to the Shaw Direct
satellite receiver. Connect the receiver to a TV to see a relative
scaled signal level meter that will assist you in obtaining maximum
signal strength. If you are unsure of how to connect the TV to the
receiver, refer to the User Guide that came with your receiver.
If you are working with an
non-activated legacy receiver,
you should see the following
displayed on the TV when
you first turn the receiver on.
Using the remote, tune receiver
to channel 284 to align the
dish. If the receiver has been
activated before, tune to channel
299 (not 284).
For new or non-activated
Advanced receivers, you
should see the following
displayed on your TV when you
first turn the receiver on. Tune
to channel 299 if the receiver
is not already there.
Non-activated legacy receivers.
Advanced receivers.
Step 3: Access the Installation Settings menu. To access this menu
on legacy model receivers:
1. Using the remote, press Options
2.Press 6: System Setup
3.Press 3: Installation settings
4.Press 1: Tune in Satellite Signal
Position the yellow cursor
on the Provider ID (using
navigator keys on the remote
control) and enter 4128
on the keypad.
Installer Menu for legacy model receivers.
7
To access this menu for on Advanced model receivers:
1. Using the remote, press Options
2.Press 6: System Setup (if available)
3.Press 4: System Settings
4.Press 3: Installation Settings
5.Press 1: Tune in Satellite Signal
Step 5: Standing behind the dish, using both hands, grasp the dish
on each side and slowly move the dish in very small increments to
the east or west (several degrees) while your assistant observes the
TV installation menu for increases in signal strength.
Step 6: As you start to get an indication of increasing signal, make
a second reference mark on the dish clamp and pipe mast to serve
as a point where signal strength increased.
Installer menu for Advanced receivers.
Position the yellow cusor on EMM Provider ID (using navigator
keys on the remote control) and enter 4128 on the keypad. Use the
above illustrated installer menu to align the dish for maximum
signal strength. You should have the assistance of a second person
to monitor the TV while you complete the adjustments to the
satellite dish. As you align the dish for optimum signal strength,
the signal level bar will increase in length from left to right and
will change colour from red (no signal) to yellow (marginal signal)
to green (good signal). Continue to align the dish until you achieve
maximum strength. Under clear sky conditions and depending on
your location, you should be able to achieve a signal strength
of between 80 and 90%. In addition to the visual signal strength
indicator, the receiver also emits an audio beeping that will
increase in speed as signal strength increases and will become
a monotone once you have aligned the dish to the satellite and
achieved approximately 50% signal strength. When audio beep
becomes monotone, the front panel signal LED should change
from Red to Green, indicating signal lock on the satellite.
7. ALIGNING DISH TO ACQUIRE
SHAW DIRECT SIGNAL
Step 7: As you move dish past
the point of maximum signal
strength, move dish back in
the opposite direction until
you achieve maximum signal.
Step 8: Tighten the dish clamp screws.
Step 9: Now make small adjustments to the elevation of the dish to
see if you can further improve on the signal strength. Loosen the
Elevation Adjustment Bolts and make slight adjustments (1/2 degree
increments) in the elevation, finding the maximum signal strength.
When you’ve located the maximum signal strength possible, securely
tighten all bolts.
Step 10: As a last step, adjust the skew of the dish according to the
skew setting you recorded for the location where you are installing
the dish. Again, make small adjustments as your assistant monitors
the signal strength. When you have reached maximum signal
strength tighten the screw to lock down the skew setting.
With the receiver on and your assistant ready to monitor signal
strength on the TV, you are now ready to make adjustments to the
dish to acquire the Shaw Direct satellite signal.
NOTE: Do not be discouraged if you do not acquire signal on your first attempt.
Be patient and try again. Recheck the pipe mast for true vertical 90 degrees.
Once you acquire signal, you may need to make very small adjustments to the
dish compass heading (azimuth), elevation and skew settings to maximize signal
strength to between 80 and 90%.
Step 1: Refer to the azimuth, elevation and skew settings for the
location that you recorded on Page 5.
Signal Verification
Step 2: For initial alignment, set the skew to 90 degrees. Skew will
be readjusted to your specific location setting once you acquire the
Shaw Direct satellite signal.
TIP: It is easier to locate satellite signal with skew set to 90 degrees.
The front panel of the satellite receiver will indicate if the correct
Shaw Direct signal is being received. On the receiver, observe the
LED signal status indicator light. Once this light is no longer red, it
indicates the receiver is tuned to a valid channel and has acquired
the Shaw Direct signal.
Step 3: Check that the dish elevation is set to the elevation setting
listed for your area.
You are ready to proceed to the next step.
Step 4: Draw a reference mark on the dish clamp and pipe mast as
a starting point before you make any adjustments to the dish.
If this LED light is RED it indicates NO SIGNAL is being received
by the receiver. The dish is not properly aligned to receive the Shaw
Direct satellite signal.
8
Authorizing Receiver for Service
If your receiver installer menu displays signal strength of between
80 and 90%, you have successfully aligned the dish to the Shaw
Direct satellite.
9. Alternate Tuning Method
Figure K
Congratulations, you are now ready to authorize your receiver for
programming. Record the receiver serial number (SN) and receiver
unit address (UA) from the bar code label on the back panel of the
receiver or from the bar code label that is applied to the receiver’s
shipping carton. Record these numbers below for future reference.
SN (16 digits) _________________________
UA, 0 0 0 – 0 __ __ __ __ - __ __ __ __ __ - __ __ __
8. Fine Tuning
Step 1: Call Shaw Direct at 1.888.554.7827 to authorize your
receiver for programming.
Shaw Direct will ensure the correct channel map is set for your
receiver and verify the reception of both satellites. After your
receiver has been activated, you can fine tune the dish to ensure
maximum signal strength on all channels.
While speaking with the Shaw Direct representative, ask for a
reference channel from each satellite to use when fine tuning the dish.
You may prefer to locate the satellites using a SF-100 Satellite
Finder (see Figure K), a standalone satellite signal finding meter
which can be purchased separately from Shaw Direct or your Shaw
Direct retailer.
Step 2: Tune to the first reference channel provided and access the
Installation Settings menu as described in Section 6.
Step 1: Connect a short coaxial cable from the LNB terminal on the
Satellite Finder to the Quad LNB. Connect the receiver terminal on
the meter to a coaxial cable, which in turn connects to the SAT IN
port on the Shaw Direct receiver.
Fine tuning the Azimuth:
Step 2: Tune to channel 299 (Advanced receivers). If you have
a non-activated legacy receiver, tune to channel 284.
Step 3: With your assistant monitoring the signal level, move the dish
back and forth slightly (about a millimeter at a time) to attempt to
acquire the highest reading possible on the signal strength meter.
Step 4: Once you have found the maximum signal strength, lock the
azimuth rotation position in place by tightening the Azimuth Clamp
Bolts (see Figure C).
NOTE: Fine tuning to a high signal strength reduces signal interference in adverse
weather conditions and ensures optimal reception from both satellites. Although
the signal level bar goes to a maximum of 99, you will not reach this level.
Note: For satellite finder and LNB to function, they must be connected to a
satellite receiver, plugged in and turned on.
Step 3: Adjust the dish as closely as possible to the elevation and
azimuth settings you recorded earlier.
Step 4: Move the dish azimuth rotation very slightly to the right of
the reference mark you drew on page 5.
Step 5: Loosen the Elevation Adjustment Bolts and make slight
adjustments (1/2 degree increments) in the elevation, finding the
maximum signal strength, as you did in the azimuth tuning process.
Step 5: Slowly rotate the dish back toward the reference mark and
and listen for pitch changes in the audible tone. If your elevation is
set correctly, you should hear two major pitch changes as it picks
up the satellite signals. A weak first change of pitch may be the
wrong satellite. Continue rotating the dish until the second major
deflection, which will be SAT A (107.3), your intended target.
Step 6: Exit the Installation Settings menu and tune to the second
reference channel provided. Go back into the Installation Settings
menu and repeat steps 3-5 to maximize signal strength from the
second satellite.
Step 6: When you have located both signals, move the dish slightly
to the right and left of the mark until you’ve maximized the signal.
Then tighten the Azimuth Clamp Bolts. Verify you’ve located the
correct satellite (see Signal Verification on page 8).
Fine tuning the Elevation:
Step 7: When you’ve located the highest signal possible on both
channels, securely tighten all bolts
YOU HAVE JUST COMPLETED FINE TUNING. Skip ahead to section 10.
9
Step 7: While listening to the meter, apply gentle pressure to the top
of the dish to move the dish – first slightly downward, then upward
to see if you can increase the signal strength further. Carefully
adjust the elevation until you’ve maximized the signal. Tighten the
Elevation Adjustment Bolts.
Figure L
Step 8: Follow the steps described in Fine Tuning (Section 8) to
obtain the highest reading possible on the signal strength meter.
Step 9: The dish should now be peaked to its maximum. Remove
the Satellite Finder and plug the LNB directly into the receiver.
Confirm the signal strength by checking the on-screen signal
strength meter, as described in the previous section.
Your system is now fine tuned.
10. Grounding the Coaxial Cable
The Shaw Direct dish kit includes the following items to ground the
outdoor coaxial cable:
■ Coax
Cable Connector Grounding Block
■ Grounding
Wire
■ Grounding
Clamp
Outdoor coaxial cable that may be subject to static discharge
or contact with electrical wiring must be grounded through a
grounding block located as close as possible to the cable entry
point (see Figure L).
■ Run
the Grounding Wire for the coaxial cable from the Grounding Block
connector to a cold water pipe nearest the cable entry point.
■ Wrap
the copper grounding strap around the cold water pipe. Tighten the
strap using a bolt and secure the ground wire under the binding post nut,
as illustrated below.
IMPORTANT: For more information on grounding, refer to the receiver’s
User Guide included with your Shaw Direct system.
Grounding Block
11. Troubleshooting
if you are having trouble finding the satellite
signal, try each of the following:
■ The
cable can be plugged into any of the 4 available ports on the quad LNB,
but must be plugged into the SAT IN port on the Shaw Direct receiver.
■ Make
sure all cables are secure and re-verify your azimuth, elevation and skew
setting for your location. The settings straight section must be plumb.
■ Adjust
the elevation by +1 degree from the settings you recorder earlier
and repeat the steps in Section 7 to acquire Shaw Direct signal.
■ Adjust
the elevation by –1 degree from your original settings you recorded
earlier and repeat the steps in Section 7 to acquire Shaw Direct signal.
■ Ensure
cables are connected properly at the grounding block.
if you cannot change channels, try the following:
■ Unplug
the receiver, wait 30 seconds and plug it back in. Turn on the
receiver and try selecting channel 299 with your remote (Advanced
receivers). If you have a legacy receiver and cannot access channel 299,
try 284.
If you still can’t select or acquire signal on 284 or 299, call us at
1.888.554.7827 for further assistance.
Ground block (shown with
2 coax cable feeds and ground
wire secured to binding post)
10
Satellite Locator Chart
Satellite Look Angles are listed for both Satellite A (107.3W longitude) and Satellite B (111.1W longitude). The reception of satellite signals in
areas with a dish elevation less than 12 degrees may not be possible. Consult with a Shaw Direct retailer in your area. All information is listed
in degrees.
NOTE: Please refer to the SATELLITE B settings if you have an elliptical dish. SATELLITE A should only be used for a round dish.
Town/City
Newfoundland
Bonavista
Cartwright
Corner Brook
Gander
Grand Falls
Hebron
Indian Harbour
Labrador City
Nain
North West River
Nutak
Placentia
Port aux Basques
Rigolet
Schefferville
St. Anthony
St. John’s
Trepassey
Wabush City
Nova Scotia
Bridgewater
Cape Breton Is.
Chesterfield In.
Dartmouth
Freeport
Mulgrave
Port Hawkesbury
Port Maitland
Sable Is.
Shelburne
Sydney
Truro
Wedgeport
Yarmouth
Satellite A
Satellite B
Satellite A
Satellite B
Compass Dish
Dish
Azimuth Elevation Skew
Compass Dish
Dish
Azimuth Elevation Skew
Town/City
Compass Dish
Dish
Azimuth Elevation Skew
Compass Dish
Dish
Azimuth Elevation Skew
264
262
260
263
262
259
262
251
258
259
259
263
258
261
251
262
264
263
251
14.4
13.8
17
15
15.7
13.6
13.6
19.1
14.4
15.5
13.8
15.5
18.5
14.3
17.8
14.4
14.6
15.4
19
126
120
124
125
125
114
119
116
116
119
115
127
125
119
115
122
127
128
116
267
265
263
266
265
262
265
254
262
262
262
266
262
264
255
266
267
267
254
12.1
11.9
14.8
12.8
13.5
12
11.7
17.3
12.7
13.6
12.2
13.2
16.2
12.4
16.1
12.3
12.3
13.1
17.2
127
121
125
126
126
115
120
118
117
120
116
128
126
120
116
124
128
129
118
252
256
208
254
250
256
256
250
258
251
257
254
250
250
23.7
20.5
17.5
22.9
24.8
21
21
24.9
21.1
24.6
19.9
22.3
25
25
125
125
98
125
124
125
125
125
128
125
125
125
125
125
256
260
212
257
254
259
260
254
261
255
261
257
254
254
21.3
18.2
16.9
20.6
22.5
18.6
18.6
22.5
18.6
22.2
17.6
20
22.6
22.7
127
127
100
127
126
127
127
127
129
127
127
126
127
127
254
21.7
124
258
19.4
126
248
251
251
250
247
250
249
248
249
252
249
251
250
249
250
24
22.2
22.5
22.3
23.8
23.9
24.9
24.1
23.1
22.7
23.8
22.6
23.9
23.6
24
122
122
122
121
120
123
124
122
121
123
122
122
123
121
123
252
255
255
254
251
253
253
252
252
256
253
255
253
252
254
21.9
20.1
20.3
20.2
21.7
21.7
22.6
22
21
20.5
21.6
20.4
21.6
21.5
21.7
123
123
124
123
122
124
126
124
123
125
124
124
125
123
125
242
231
254
24.7
27.6
19.6
118
114
121
246
235
258
22.7
25.9
17.5
120
116
123
Asbestos
Baie Comeau
Baie St.Paul
Asbestos
Beattyville
Cap-de- la-Madeleine
Charlesbourg
Chibougamau
Chicoutimi
Cowansville
Dolbeau
Donnacona
Dosquet
Drummondville
Eastmain
Festubert
Fort Coulonge
Gagnon
Gaspe
Gatineau
Granby
Grand Mere
Hauterive
Hull
Inukjuak
Ivujivik
Joliette
Kuujjuaq
Kuujjuarapik
La Sarre
La Tuque
Levis
Madeleine
Malartic
Maniwaki
Matagami
Matane
Mingan
Miquelon
Mistassini
Monet
Mont Laurier
Mont Louis
Montmagny
Montreal
Mont Joli
Natashquan
Noranda
Parent
Paspebiac
Pointe aux Anglais
Pointe-aux-Tremble
Port Cartier
Quaqtaq
Quebec
Rimouski
Riviere-du-Loup
RivierePentecote
Roberval
242
248
244
242
232
241
243
238
243
240
241
242
242
241
231
240
233
248
253
235
240
241
248
235
235
240
239
252
234
228
240
243
256
230
235
232
249
253
234
241
235
235
251
244
239
247
256
229
237
251
249
239
250
253
243
247
245
249
241
246
251
248
246
237
245
247
242
247
244
245
246
246
245
235
244
237
252
256
239
244
245
251
239
239
244
243
256
238
233
244
247
259
235
239
236
252
257
238
245
239
239
255
248
243
251
260
233
241
255
253
243
253
256
247
251
249
253
245
Prince Edward Island
Charlottetown
New Brunswick
Bath
Bathurst
Chatham
Dalhousie
Edmundston
Fredericton
Grand Manan Is.
Hartland
Kedgwick
Moncton
Napadogan
Newcastle
Oromocto
Plaster Rock
St. John
Quebec
Alma
Amos
Anticosti
26.9
22.4
24.9
26.9
26.9
26.8
25.7
24.9
24.4
27.8
24.7
26.1
26.2
27.1
24.5
26.2
29.3
20.4
20.7
29.1
27.6
25.1
22.5
29.1
19
15.4
27.5
15.8
21.5
27.8
26.1
25.7
20.1
28
28.5
26.5
22.3
19.5
26.2
24.6
26.8
28.1
21.1
25.3
28
22.9
18.4
28.2
26.6
21.7
21.6
27.8
21.2
14.1
25.8
23.1
24.1
21.5
25
120
119
119
120
114
119
119
115
118
120
117
119
119
119
111
118
117
117
121
118
120
117
119
118
107
105
119
112
109
113
118
119
124
114
117
113
120
120
114
117
115
117
120
120
119
119
121
113
116
121
119
119
119
109
119
119
119
119
117
24.9
20.4
22.9
24.9
25.2
24.7
23.7
23.1
22.5
25.7
22.8
24.1
24.1
25.1
23
24.2
27.4
18.6
18.6
27.1
25.6
23.2
20.5
27.2
17.8
14.4
25.5
14.4
20.1
26.2
24.1
23.7
17.8
26.2
26.6
24.8
20.3
17.5
24.5
22.8
25
26.2
19.1
23.2
26
20.9
16.3
26.5
24.7
19.6
19.6
25.8
19.2
12.8
23.7
21.1
22.1
19.5
23.1
122
121
121
122
116
121
121
117
120
122
119
121
121
121
113
120
119
118
123
120
122
119
121
120
109
106
121
113
111
115
120
121
125
116
119
115
121
122
116
119
118
119
122
122
121
121
123
116
119
123
121
121
121
110
121
121
121
121
119
11
Satellite A
Satellite B
Satellite A
Satellite B
Town/City
Compass Dish
Dish
Azimuth Elevation Skew
Compass Dish
Dish
Azimuth Elevation Skew
Town/City
Compass Dish
Dish
Azimuth Elevation Skew
Compass Dish
Dish
Azimuth Elevation Skew
Rouyn
Salluit
Senneterre
Sept Iles
Shawinigan
Sheldrake
Sherbrooke
Sorel
St. Paul du Nord
St. Agathe-des-Monts
St. Agapit
St. Anne de Beaupre
St. Augustin
St. Boniface
St. Eloi
St. Hyacinthe
St. Jean
St. Jerome
St. Jean de Matha
St. Laurent
St. Pacome
St. Pascal
St. Simeon
St. Stephen
Tadoussac
Trois-Rivieres
Val d’0r
Valleyfield
Vandry
Verdun
Victoriaville
Waskaganish
Wemindji
Windsor
229
244
232
250
240
252
242
240
246
238
242
243
259
188
246
240
239
238
239
239
245
245
245
249
245
241
231
238
239
239
242
230
231
241
28.2
15
27.3
20.8
26.7
20
27.2
27.3
23.5
27.9
26
25.5
16.1
32
23.8
27.6
28
28
27.4
28
24.7
24.5
24.3
24.8
24
26.8
27.8
28.5
26.1
28
26.7
25.3
24
27.1
113
106
114
119
119
120
120
119
119
118
119
119
121
99
119
119
119
118
118
119
119
119
119
123
119
119
114
119
117
119
119
111
110
120
233
248
236
254
244
256
246
244
250
242
246
247
263
193
250
244
243
242
243
243
249
249
249
252
249
245
235
242
243
243
246
234
235
245
26.5
14
25.6
18.8
24.7
18
25.1
25.3
21.5
26
24
23.4
14.1
31.3
21.8
25.5
25.9
26
25.4
26
22.6
22.4
22.3
22.5
22
24.8
26.1
26.4
24.2
26
24.6
23.8
22.5
25
116
107
117
121
121
121
122
121
121
120
121
121
123
102
121
121
122
121
121
121
121
121
121
125
121
121
116
121
119
121
122
113
112
122
231
234
231
227
232
220
228
228
227
235
227
234
220
223
227
230
225
226
237
218
232
198
221
228
202
223
222
224
197
212
234
212
231
223
30.8
29.4
30.5
31.9
31
31.6
31.2
32.1
32.6
29.8
32.9
29.6
30.4
34.8
29.3
31.6
28.3
32.1
29
30.3
29.4
31.1
31.3
30.7
31.4
31.2
29.8
25.6
32.6
23.8
30.2
29.8
30.6
33.4
116
117
116
116
117
112
115
116
116
118
116
117
110
115
113
117
111
115
119
110
116
102
112
115
104
113
111
109
102
103
118
107
117
115
235
238
235
232
236
225
232
232
232
239
232
238
224
227
232
235
229
231
241
223
236
203
226
232
207
227
226
229
202
216
238
216
236
228
28.9
27.5
28.6
30
29
30
29.3
30.2
30.7
27.8
31
27.6
28.9
33
27.6
29.6
26.8
30.2
26.9
28.8
27.6
30.3
29.7
28.9
30.3
29.5
28.2
24.3
31.6
22.9
28.2
28.5
28.7
31.6
119
120
119
118
120
115
118
119
119
121
119
120
113
118
116
120
114
118
121
112
118
105
115
118
107
115
114
111
105
105
121
109
119
117
Gogama
Gravenhurst
Guelph
Haliburton
Hamilton
Hanover
Hearst
Hornepayne
Huntsville
Ignace
Ingersoll
Iroquois Falls
Kapuskasing
Kenora
Kincardine
Kingston
Kirkland Lake
Kitchener
Lindsay
Little Current
London
Longlac
Lynx
Macdiarmid
Madoc
Magog
Manitoulin I.
Matachewan
Mattawa
Mattice
Mekatina
Michipicoten
Midland
Milne Inlet
Mobert
Moosonee
Nakina
New Liskeard
Newcastle
Nipigon
North Bay
Oakville
Oba
Opasatika
Orillia
Oshawa
Ottawa
Ottawa Is.
Oulmet
Owen Sound
Pagwa River
Parry Is.
Parry Sound
Pembroke
Penetanguishene
Perth
Petawawa
Peterborough
Pickle Crow
Picton
Port Nelson
Port Stanley
Ramore
Red Lake
Renfrew
Richmond Hill
Sand Lake
Sarnia
Sault Ste Marie
223
229
226
231
227
225
219
217
228
201
225
225
222
194
223
234
227
226
229
223
224
213
214
209
232
241
221
225
229
220
218
216
227
259
215
226
212
227
230
209
228
227
218
221
228
229
235
233
208
225
216
194
227
232
227
234
232
230
205
232
200
224
226
196
233
228
217
222
217
228
233
231
235
232
229
224
221
233
205
230
230
226
199
228
238
231
230
234
227
229
218
218
214
236
245
226
230
234
224
223
221
231
263
219
230
217
232
234
213
232
232
223
225
232
233
239
237
213
229
220
198
231
237
231
238
236
234
209
237
204
229
230
201
237
232
222
227
222
ontario
Apsley
Arnprior
Bancroft
Barrie
Belleville
Blind River
Bracebridge
Bradford
Brampton
Brockville
Burlington
Carleton Place
Chapleau
Chatham
Cobalt
Cobourg
Cochrane
Collingwood
Cornwall
Dalton
Deep River
Dryden
Elliot Lake
Emsdale
English River
Espanola
Foleyet
Fort Albany
Fort Frances
Fort Severn
Gananoque
Geraldton
Gilmour
Goderich
29.9
31.1
32.9
30.6
33
32.7
28.7
29.5
30.9
31.4
33.7
28.4
28.5
31.6
33
30.5
28.7
33.1
31.5
31.5
33.9
29.5
29.1
30.4
30.8
27.4
31.9
29.2
29.8
28.7
31.4
30.8
31.7
7.1
30.4
26.2
29.2
29.2
31.8
30.9
30.1
32.7
29.5
28.6
31.6
31.9
29.1
18.3
31.2
32.3
28.9
5.4
31.2
29.5
31.7
29.8
29.5
31.3
28.9
31
23.7
34.1
28.6
30.2
29.6
32.2
30.8
34.4
31.9
112
116
116
116
116
115
109
108
115
103
116
112
110
101
114
118
113
116
116
113
115
107
107
106
117
120
112
112
115
109
110
109
115
98
108
110
107
113
117
106
114
116
109
110
116
117
118
105
106
114
108
91
115
116
115
118
116
117
103
118
99
116
112
101
117
116
110
115
111
28.3
29.3
31
28.7
31.1
30.9
27.3
28.2
29.1
30.3
31.8
26.9
27.1
30.7
31.2
28.5
27.1
31.2
29.6
29.8
32
28.3
27.8
29.2
28.8
25.3
30.3
27.6
28
27.2
29.9
29.4
29.9
6.6
29
24.7
28
27.5
29.9
29.7
28.4
30.8
28.1
27.1
29.7
30
27.2
17.2
30
30.5
27.6
5.3
29.4
27.6
29.9
27.9
27.6
29.4
27.8
29
22.9
32.3
27
29.3
27.6
30.3
29.4
32.6
30.4
114
118
119
119
119
118
112
111
118
106
119
114
113
104
117
121
115
119
119
115
118
110
110
109
120
122
115
115
117
112
113
112
118
99
111
112
109
116
119
109
117
119
112
112
118
119
120
107
109
117
110
92
117
119
118
120
119
119
106
120
102
119
115
104
119
119
112
118
113
12
Satellite A
Satellite B
Satellite A
Satellite B
Town/City
Compass Dish
Dish
Azimuth Elevation Skew
Compass Dish
Dish
Azimuth Elevation Skew
Town/City
Compass Dish
Dish
Azimuth Elevation Skew
Compass Dish
Dish
Azimuth Elevation Skew
Savant Lake
Schreiber
Simcoe
Sioux Lookout
Smiths Falls
Steep Rock Lake
St. Catharines
St. Thomas
Stokes Bay
Stratford
Sturgeon FaIIs
Sudbury
Sultan
Swastika
Tannin
Temiscaming
Thessalon
Thetford Mines
Thunder Bay
Timmins
Tionaga
Tobermory
Toronto
Trenton
Trout Creek
Wallaceburg
Waterloo
Welland
Whitby
Whitney
Windsor
Wingham
Winisk
Woodstock
203
211
226
200
234
201
228
224
224
225
227
225
221
227
202
229
219
243
206
224
222
223
228
232
228
222
226
228
229
230
221
224
217
225
30.2
30.8
33.6
30.7
29.7
32
32.8
34
32.2
33.4
30.3
30.6
30.3
28.8
31
29.6
31.8
26.3
31.7
29
29.6
32
32.4
31.1
30.4
34.7
33.1
32.9
32
30.3
35.3
33.1
23.9
33.5
104
107
116
103
118
103
117
116
114
115
114
113
111
113
104
114
111
120
106
111
111
113
116
117
115
115
116
117
117
116
115
115
105
116
208
215
231
205
239
206
233
229
228
229
231
229
225
231
207
233
224
247
211
228
227
228
232
236
232
227
230
233
233
234
225
229
222
230
29.1
29.5
31.6
29.7
27.7
30.9
30.8
32.2
30.4
31.5
28.5
28.9
28.8
27.2
29.9
27.9
30.2
24.3
30.5
27.4
28.1
30.3
30.5
29.2
28.6
32.9
31.2
31
30.1
28.4
33.5
31.3
22.8
31.6
106
110
119
106
120
106
120
119
117
118
117
116
114
115
106
117
114
122
108
114
114
116
119
120
117
118
118
120
119
118
118
118
107
119
Rosthern
Saskatoon
Shaunavon
Sherridon
Stanley
Swift Current
Tisdale
Uranium City
Watrous
Weyburn
Wilkie
Yorkton
168
167
165
178
170
166
173
161
170
174
163
176
29.8
30.3
33
24.8
26.4
32.4
29.5
22.4
30.8
32.9
30
31.2
91
91
89
94
92
90
93
89
91
93
89
94
173
172
169
183
175
170
177
165
175
179
168
181
29.6
30.2
33
24.4
26.2
32.3
29.2
22.4
30.6
32.6
30
30.8
94
94
92
97
94
93
95
91
95
96
92
97
182
181
188
177
188
183
185
187
179
182
186
185
186
178
186
188
200
32.4
31
32.9
27.3
31.2
28.8
30.2
30.6
25
32
32.8
32.1
27.8
28.3
25.9
32
23.7
96
96
99
94
98
96
97
98
94
96
98
98
97
94
97
99
100
187
186
193
182
193
188
189
192
183
187
191
190
191
183
191
193
204
31.9
30.5
32.2
26.9
30.5
28.3
29.6
30
24.7
31.4
32.2
31.4
27.2
27.9
25.3
31.3
22.9
99
99
102
97
101
99
100
101
97
99
101
101
100
97
99
102
102
154
151
157
158
154
156
151
156
154
149
156
156
157
148
145
158
145
147
156
154
154
156
148
145
160
147
154
156
157
157
159
155
27.3
30.9
31.6
31.9
31.2
29.2
32.7
30.9
28.6
28.2
23.2
24.8
25.3
23.2
26.2
30.8
25.1
28.7
27.4
29.7
28.9
32.8
25.9
22.4
32.5
25.3
29.9
29.9
28.7
28.7
29
29.2
86
83
86
86
85
86
83
86
86
83
88
87
87
85
82
86
83
82
87
85
85
85
83
84
87
83
85
86
87
87
87
85
159
156
162
163
159
160
156
161
159
154
161
160
161
152
149
162
149
151
161
159
159
161
152
149
165
151
159
161
161
161
164
159
27.5
31.3
31.8
32
31.4
29.4
33.1
31.1
28.8
28.6
23.2
24.9
25.4
23.5
26.7
30.9
25.6
29.2
27.5
30
29.1
33
26.3
22.7
32.6
25.7
30.2
30.1
28.9
28.9
29.1
29.4
89
86
89
89
88
89
86
89
88
86
90
90
90
87
85
89
85
85
89
88
88
89
86
86
90
86
88
89
89
89
90
88
169
165
165
175
164
177
169
161
162
171
170
171
164
172
165
33.1
27.1
30.4
33.5
22.6
30.8
27.1
29.1
32.7
29.5
32.2
31
29.7
32.1
31
91
90
90
94
90
94
91
88
88
92
91
92
89
92
90
174
169
170
180
168
182
174
165
167
176
175
176
169
177
170
32.9
27
30.4
33.1
22.6
30.4
26.9
29.1
32.8
29.3
32
30.8
29.6
31.8
30.9
94
93
92
97
92
97
94
91
91
95
95
95
92
95
93
142
125
139
137
142
139
140
136
138
141
133
140
144
145
132
139
141
139
139
149
140
145
30.4
18.7
31.7
30.6
25.4
31.9
32.2
23.9
21.9
24.8
24.5
24.8
30.7
31.7
25.3
31.6
30.3
25.7
31.4
32.4
31.6
32
79
75
76
75
81
76
76
79
81
81
77
80
79
80
75
76
78
79
76
82
77
80
147
129
144
142
147
144
145
141
142
146
137
144
149
150
136
144
146
143
144
154
145
150
31.1
19.7
32.5
31.5
26
32.7
33.1
24.6
22.5
25.4
25.3
25.4
31.3
32.3
26.2
32.5
31
26.4
32.3
32.9
32.4
32.7
82
77
79
78
84
79
79
81
83
83
79
83
82
83
78
79
81
82
79
85
80
83
manitoba
Brandon
Dauphin
Emerson
Flin Flon
Gimli
Grand Rapids
Gypsumville
Hodgson
Lynn Lake
Minnedosa
Morden
Portage la Prairie
Norway House
The Pas
Thompson
Winnipeg
York Factory
saskatchewan
Assiniboia
Beauval
Biggar
Estevan
Fond du Lac
Kamsack
La Ronge
Lloydminster
Maple Creek
Melfort
Moose Jaw
Nokomis
North Battleford
Regina
Rosetown
alberta
Athabasca
Banff
Bassano
Brooks
Calgary
Camrose
Cranbrook
Drumheller
Edmonton
Edson
Fort Chipewyan
Fort MacKay
Fort McMurray
Fort Vermilion
Grande Prairie
Hanna
Hines Creek
Jasper
Lac Ia Biche
Lacombe
Leduc
Lethbridge
McLennan
Meander River
Medicine Hat
Peace River
Red Deer
Stettler
Vegreville
Vegreville
Vermilion
Wetaskiwin
british columbia
Ashcroft
Atlin
Chemainus
Courtenay
Dawson Creek
Duncan
Esquimalt
Fort Grahame
Fort Nelson
Ft St. John
Hazelton
Hudson Hope
Kamloops
Kelowna
Kitimat
Ladysmith
Lillooet
McLeod Lake
Nanaimo
Nelson
New Westminster
Penticton
13
Satellite A
Satellite B
Satellite A
Satellite B
Town/City
Compass Dish
Dish
Azimuth Elevation Skew
Compass Dish
Dish
Azimuth Elevation Skew
Compass Dish
Dish
Azimuth Elevation Skew
Compass Dish
Dish
Azimuth Elevation Skew
Port Alice
Port Renfrew
Prince George
Prince Rupert
Quesnel
Queen Charlotte Is.
Revelstoke
Saanich
Sidney
Simoom Sound
Squamish
Stewart
Telegraph Creek
Trail
Vancouver Is.
Vancouver
Vernon
Victoria Beach
Victoria
Williams Lake
134
138
139
130
140
127
147
140
140
135
140
130
128
148
136
140
146
189
140
141
29.2
31.9
26.8
24.7
27.8
25.1
30.7
32.2
32
29
31
23.1
20.9
32.8
30
31.5
31.3
31
32.3
28.8
74
75
79
74
79
72
81
76
76
75
77
75
76
81
75
77
80
99
76
79
139
143
144
134
145
132
152
145
145
139
145
134
132
153
141
145
150
194
145
146
30.2
32.9
27.5
25.7
28.5
26.3
31.2
33.1
32.9
30
31.9
24.1
21.8
33.4
30.9
32.4
31.9
30.3
33.1
29.5
77
79
82
77
82
75
84
79
79
78
80
78
78
84
78
80
83
102
79
82
252
253
158
211
165
268
233
261
197
257
198
247
251
254
134
190
268
264
223
142
205
228
231
259
226
230
212
200
213
201
12.8
7.1
14.8
5.4
12.4
7.6
6.1
5.4
19.8
11.7
12.5
10.3
15
12.8
4
19.3
7.7
9.2
11.9
13.6
17.8
13.4
6.5
12.2
8
14.9
11.4
18.9
14.7
18.3
106
97
90
92
91
108
93
96
97
107
94
100
110
108
89
96
107
107
97
87
98
99
93
110
94
101
95
97
97
97
255
257
162
215
169
272
237
265
201
261
202
251
255
258
138
194
271
267
227
146
209
232
235
263
230
234
216
204
217
206
11.7
6.7
14.8
5.2
12.3
6.4
5.9
5
19.3
10.5
12.2
9.6
13.7
11.6
4
18.8
6.6
8
11.4
13.7
17.2
12.7
6.2
10.9
7.7
14.2
11
18.3
14.1
17.8
107
98
91
93
92
109
94
97
99
109
96
101
111
109
90
98
108
108
98
88
100
100
94
112
95
102
97
99
99
99
nunavut
Amadjuak
Arctic Bay
Bathurst Inlet
Bathurst Is.
Cambridge Bay
Cape Dyer
Cornwallis Is.
Devon Is.
Eskimo Point
Frobisher Bay
Gjoa Haven
Igloolik Is
Kangirsuk
Lake Harbour
Mackenzie King Is.
Padlei
Padloping Is
Pangnirtung
Pelly Bay
Qurlurtuuq
Rankin Inlet
Repulse Bay
Resolute
Resolution Is.
Somerset Is.
Southampton Is.
Spence Bay
Tavani
Wager Bay
Whale Cove
Town/City
northwest territory
Arctic RedRiver
Banks Is.
Fort Franklin
Fort Good Hope
Fort Liard
Fort Norman
Fort Reliance
Fort Simpson
Fort Smith
Ft McPherson
Ft Providence
Ft Resolution
Hay River
Holman Island
Inuvik
Jean Marie Rvr
Melville Is.
Nahanni Butte
Norman Wells
Port Radium
Rae
Snowdrift
Tuktoyaktuk
Victoria Is.
Wrigley
Yellowknife
yukon territory
Big Salmon
Carmacks
Dawson
Forty Mile
Keno Hill
Klondike
Mayo Landing
Old Crow
Stewart River
Tagish
Teslin
Watson Lake
Whitehorse
120
126
132
126
136
130
158
138
154
120
143
150
147
135
120
139
144
135
129
139
145
155
120
149
134
148
11.6
7.9
15.3
13.6
20.3
15.4
19
19.1
21.8
11.4
20
20.5
20.7
10.5
10.9
19.4
6
19.5
14.8
15.1
18.6
19.4
10
10.5
17.3
19
79
86
83
81
81
82
89
83
87
79
84
87
85
86
80
83
89
81
81
85
86
88
81
89
82
86
124
130
136
130
140
134
162
142
159
124
148
155
151
139
124
143
148
140
133
143
149
159
124
154
138
152
12.3
8.2
15.8
14.2
20.9
15.9
19
19.6
21.9
12.1
20.3
20.7
20.9
10.7
11.5
19.9
6
20
15.3
15.3
18.8
19.4
10.5
10.5
17.8
19.2
81
87
84
82
83
83
91
85
90
80
86
89
87
88
81
85
90
83
83
87
87
90
82
90
84
88
122
121
118
117
121
118
121
116
118
124
125
129
123
2216.3
15.8
13.3
12.8
14.4
13.4
14.5
10.3
14
17.9
18.5
19.4
17.4
76
75
75
75
77
75
77
77
75
75
76
78
75
127
125
122
121
125
122
125
120
122
128
129
134
127
17.2
16.7
14.3
13.7
15.2
14.3
15.3
11.1
14.9
18.9
19.3
20.2
18.3
78
77
77
77
79
77
78
79
76
77
78
80
77
10.3
8.3
4.2
2.9
102
93
87
92
258
201
125
259
9.5
8.1
4.3
2.8
103
94
88
93
canadian arctic islands
Prince Charles Is.
Prince of Wales Is
Prince Patrick Is.
Queen Elizabeth Is
254
197
121
256
notes
14

Similar documents

Satellite Self Installation Manual

Satellite Self Installation Manual If you live in Newfoundland, the satellite will be to the Southwest.

More information

SHAW DIRECT - Self install manual

SHAW DIRECT - Self install manual line of sight to both SAT B and SAT A based on the settings you recorded earlier. There should be no trees, buildings or other obstructions between the dish and the satellite. Do you have a clear l...

More information

annual report - The Night Ministry

annual report - The Night Ministry Bank of America, N. A. Trustee The Eleanor Network at Chicago Foundation for Women The Fama Family Charitable Fund The Negaunee Foundation The Otho S. A. Sprague Memorial Institute The University o...

More information