Chinoiserie Free pattern

Chinoiserie
designed by Joanie Holton & Melanie Greseth
featuring fabrics from the Anna Griffin’s Chinoiserie collection
Starting with SET 1, you will sew your sets to each edge of
the E square working counter-clockwise around the square.
Chinoiserie
Finished Quilt Size: 51” X 66”
Be sure to read through instructions before beginning. Cutting
instructions include 1/4” seam allowance. Yardage is based on
42” of usable fabric width. All strips are cut across the width of
fabric (WOF) unless otherwise stated. Press all seams as you
assemble your blocks.
Yardage and Cutting Instructions
Vase Orange CF1706-1
5/8 yard
B1. (1) 4” x WOF strip –sub-cut (6) Template B
D1. (3) 4” x WOF strip –sub-cut (6) Template D
Bamboo Green CF 1702-1
5/8 yard
B2. (1) 4” x WOF strip –sub-cut (6) Template B
D2. (3) 4” x WOF strip –sub-cut (6) Template D
Prosperity Turquoise CF1704-1
1-1/2 yards
B3. (2) 4” x WOF strip –sub-cut (12) Template B
D3. (6) 4” x WOF strip –sub-cut (12) Template D
H. (7) 2-1/4” x WOF strips –binding
Blossom CF1704-1
2 yards
A. (6) 5-1/4” x WOF strips –sub-cut (24) Template A
C. (6) 4-1/2” squares –sub-cut diagonally twice (24 triangles)
E. (6) 5-1/4” squares
F. (3) 5-1/2” x WOF strips –side borders
Toile Orange CF1705-3
3/8 yard
G. (3) 3” x WOF strips –top borders
Riley’s Knot Block Assembly
Sew (1) B1 piece to the right side of (1) A
piece. Sew (1) C triangle to the other side
of the B1 piece. (diagram 1)
To the bottom of this set,
sew (1) D3 piece. (diagram 2)
Repeat to make (6) SET 1
D3
Diagram 1
A
B1
C
With right sides together, place (1) E square
on top of SET 1 at the square corner of
SET 1
the D3 strip. Along the base of SET 1, sew
E
to the center of the E square and stop.
Press the seam toward D3 to mark
Sew to center
of E square.
the continuing seam for later.
1
1.) With right sides together,
place (1) SET 2 base on top
of the new edge created by
SET 1
adding the E square.
Match the raw edges
4
SET 2
E
and sew together.
SET 4
2
Press seam toward
SET 2 base.
SET 3
2.) With right sides together,
place (1) SET 3 base on top of
3
the new edge created by adding the set.
Match the raw edges and sew together. Press seam toward
SET 3 base.
3.) With right sides together, place (1) SET 4 base on top of
the new edge created by adding the set. Match the raw edges and sew together. Press seam toward SET 4 base.
4.) Fold block at the first seam along the top of the E square,
placing SET 1 wrong sides together with SET 4 base/E
square. Align raw edges and finish seam to the end of SET 4
to complete block. Press seam toward SET 1 base.
Repeat SET assembly to complete (6) blocks.
Diagram 2
SET 1
Sew (1) B3 piece to the right side of (1) A piece. Sew
(1) C triangle to the other side of the B3 piece.
(diagram 1) To the bottom of this set, sew (1) D2
B3
piece. (diagram 2) The longest edge of your D piece will be
D2
considered the BASE of your set going forward.
SET 2
Repeat to make (6) SET 2
Sew (1) B2 piece to the right side of (1) A piece. Sew
(1) C triangle to the other side of the B2 piece.
B2 (diagram 1) To the bottom of this set, sew (1) D3
piece. (diagram 2) The longest edge of your D piece will be
D3
considered the BASE of your set going forward.
SET 3
Repeat to make (6) SET 3
Sew (1) B3 piece to the right side of (1) A piece. Sew
(1) C triangle to the other side of the B3 piece.
(diagram 1) To the bottom of this set, sew (1) D1
B3
piece. (diagram 2) The longest edge of your D piece will be
D1
considered the BASE of your set going forward.
SET 4
Repeat to make (6) SET 4
Quilt Assembly
Layout (3) rows of (2) blocks each. Refer to quilt image for
placement. Flip (1) block so orange and blue strip ends meet
in the middle. Sew together. ROW 2 flip both blocks over to
match orange and blue strip ends in ROW 1 and blue and
green strip ends with ROW 3.
Borders
Sew (2) F strips together at one end, sew to the left side of
quilt center. Press seam toward border and trim even with
the top and bottom. Use remaining piece of F strip and sew
to (1) F strip end. Sew to right side of quilt, press and trim
even with top and bottom.
Sew (2) G strips together at one end, sew to the top of quilt.
Press seam toward border and trim even with the quilt sides.
Use remaining piece of G strip and sew to (1) G strip end.
Sew to bottom of quilt, press and trim even with sides.
Finishing
Layer quilt top, batting and backing piece, wrong sides of
fabrics both toward batting and baste. Hand quilt, machine
quilt or tie as desired. Sew binding strips (H) together into
one continuous strip, iron in half lengthwise and sew to raw
edge of quilt top. Fold in and overlap end of binding. Turn
over raw edge and hand stitch in place on back of quilt.
Template A
Template B
Tape Template D section 1
to Template D section 2
on the dashed line
Template D Section 2
Template D Section 1
Tape Template D section 1
to Template D section 2
on the dashed line
Templat