CRN Registered Hedland Flow Meters

Transcription

ts
gi Ca
st n
er a
CR
ed di
N:
an
0F
14 Pr
98
od
1.
5
uc
Re
®
Variable Area Flow Meters
Improve productivity and reduce maintenance costs through
reliable flow metering and process control technology
This page intentionally left blank
Product Locator
PETROLEUM FLUIDS
Basic Flow Meters
Pages 4-5
High Temperature
Pages 6-7
Flow-Alert Flow Switches
Pages 26-29
MR Flow Transmitters
Pages 30-32
PHOSPHATE ESTER FLUIDS
Basic Flow Meters
Pages 8-9
High Temperature
Pages 10-11
Pages 26-29
Pages 30-32
WATER-BASED FLUIDS
Basic Flow Meters
Pages 12-13
AIR/CAUSTIC &
CORROSIVE GASES
Basic Flow Meters
Pages 22-23
WATER-BASED FLUIDS (cont)
High Temperature
Pages 14-15
Pages 26-29
Pages 26-29
Pages 30-32
Pages 30-32
WATER & OTHER LIQUIDS
Basic Flow Meters
Pages 16-17
AIR & OTHER
COMPRESSED GASES
Basic Flow Meters
Pages 24-25
High Temperature
Pages 18-19
Pages 26-29
Pages 26-29
Pages 30-32
Pages 30-32
API OIL/CAUSTIC &
CORROSIVE LIQUIDS
Basic Flow Meters
Pages 20-21
Pages 26-29
Pages 30-32
Weights
Mail to: Hedland Flow Meters
Division of Racine Federated Inc.
P.O. Box 081580
Racine, WI 53408-1580 USA
Ship to: Hedland Flow Meters
Division of Racine Federated Inc.
8635 Washington Avenue
Page 40
Customers within the United States, Canada
and U.S. possessions:
Call Toll-Free: 1-800-HEDLAND (800-433-5263)
Fax Toll-Free: 1-800-CHK-FLOW (800-245-3569)
International Customers:
Phone: 1-262-639-6770
Fax: 1-262-639-2267
E-mail:
[email protected]
[email protected]
[email protected]
Web site: www.hedland.com
Monday - Friday from 8 a.m. to 5 p.m. CST
FAX 800-245-3569
3
Canadian Registration Flow Meters
For Petroleum Fluids
• Direct reading
• Install in any position
• 360° rotatable guard/scale
• Easier-to-read linear scale
• No flow straighteners or
special piping required
• Relatively insensitive to
shock and vibration
• Good viscosity stability
• Temperature up to 240 °F
• Accuracy ±2% full scale
• Repeatability ±1%
• Special scales available
• Calibrated for .876 S.G.
• CRN: 0F14981.5
SPECIFICATIONS:
MATERIALS:
T316 Stainless body, 2024 - T351 Anodized aluminum piston and cone
COMMON PARTS:
Retaining Ring: SAE 1070/1090 Carbon Steel
Spider Plate: T316 SS Retaining Spring: SAE 1070/1090 Carbon Steel
Spring: T302 SS
Indicator and Internal Magnet: PPS / Ceramic
Fasteners: T303 SS
Guard Seal / Bumper: Buna N
Pressure Seals: Viton® Scale Support: 6063 - T6 Aluminum
Guard: Polycarbonate End Caps: Nylon ST
THREADS: SAE J1926/1, NPTF ANSI B2.2, BSPP ISO1179
TEMPERATURE RANGE: -20 to +240 °F (-29 to +116 °C) for higher temp. meters, see page 6
PRESSURE RATING:
See Ordering Information Table.
PRESSURE DROP: See Ordering Information Table.
For detailed differential pressure charts, see Hedland full-line catalog.
ACCURACY: ±2% of full scale
REPEATABILITY: ±1%
REVERSE FLOW BY-PASS OPTION: Features a two-piece cone that responds
to flow in the primary flow direction in the same manner as the standard design.
Flow in the reverse direction causes the lower cone shuttle to shift, moving it below
the sharp-edged piston orifice. This shift creates a gap which allows the fluid to flow
freely in the reverse direction.
Reverse Flow By-Pass
Normal Flow Direction
DIMENSIONS:
A
B
NOMINAL LENGTH
PORT SIZE in (mm)
E
C
WIDTH
in (mm)
D
DEPTH
in (mm)
E
OFFSET
in (mm)
F
FLATS
in (mm)
¼ (SAE 6)
4.8 (122)
1.68 (43)
1.90 (48)
.84 (21)
.88 (22)
½ (SAE 10)
6.6 (168)
2.07 (53)
2.40 (61)
1.04 (26)
1.25 (32)
¾ (SAE 12)
7.2 (183)
2.48 (63)
2.85 (72)
1.24 (32)
1.50 (38)
1 (SAE 16)
7.2 (183)
2.48 (63)
2.85 (72)
1.24 (32)
1.75 (44)
1¼ (SAE 20)
12.2 (310)
4.12 (105)
4.72 (120)
2.06 (52)
2.75 (70)
1½ (SAE 24)
12.2 (310)
4.12 (105)
4.72 (120)
2.06 (52)
2.75 (70)
NOTE: Weights for all sizes can be found on page 40.
Viton is a registered trademark of DuPont Dow Elastomers
4 TEL. 800-433-5263
IMPROVE YOUR PRODUCTIVITY
A
C
E
F
D
B
ORDERING INFORMATION:
NOMINAL
PORT
SIZE
¼"
SAE 6
½"
SAE 10
¾"
SAE 12
1"
SAE 16
1¼"
SAE 20
1½"
SAE 24
FLOW RANGE
GPM
LPM
.02 - 0.2
.05 - 0.5
0.1 - 1.0
0.2 - 2.0
0.1 - 1.0
0.2 - 2.0
0.5 - 5.0
1 - 10
1 - 15
0.2 - 2.0
0.5 - 5.0
1 - 10
2 - 20
3 - 30
0.2 - 2.0
0.5 - 5.0
1 - 10
2 - 20
3 - 30
4 - 40
5 - 50
3 - 30
5 - 50
10 - 75
10 - 100
10 - 150
3 - 30
5 - 50
10 - 75
10 - 100
10 - 150
0.1 - 0.75
0.2 - 1.9
0.5 - 3.75
1 - 7.5
0.5 - 3.75
1 - 7.5
2 - 19
5 - 38
4 - 56
1 - 7.5
2 - 19
5 - 38
10 - 76
10 - 115
1 - 7.5
2 - 19
5 - 38
10 - 76
10 - 115
15 - 150
20 - 190
10 - 110
20 - 190
40 - 280
50 - 380
50 - 560
10 - 110
20 - 190
40 - 280
50 - 380
50 - 560
 Fractional
PRESSURE DROP
100% REVERSE
50%
FLOW 100% FLOW
FLOW
PSI (BAR) PSI (BAR) PSI (BAR)
3.5 (.24) 4.0 (.28)
3.0 (.21) 5.0 (.35)
4.0 (.28) 9.0 (.62)
6.0 (.41) 13 (.90)
2.0 (.14) 2.75 (.19) 5.2 (.36)
2.0 (.14) 3.0 (.21) 9.6 (.66)
3.0 (.21) 6.0 (.41) 4.8 (.33)
4.0 (.28) 9.5 (.66) 23.0 (1.6)
6.5 (.45) 18.5 (1.3) 55.2 (3.8)
1.0 (.07) 2.0 (.14) 2.9 (.20)
2.5 (.17) 3.5 (.24) 5.3 (.37)
3.5 (.24) 9.0 (.62) 8.8 (.61)
4.0 (.28) 9.0 (.62) 18.0 (1.24)
7.0 (.48) 16.5 (1.1) 45.1 (3.11)
1.0 (.07) 2.0 (.14) 2.9 (.20)
2.5 (.17) 3.5 (.24) 5.3 (.37)
3.5 (.24) 9.0 (.62) 8.8 (.61)
4.0 (.28) 9.0 (.62) 18.0 (1.24)
7.0 (.48) 16.5 (1.1) 45.1 (3.11)
9.0 (.62) 24 (1.7) 87.5 (6.04)
12.5 (.86) 34 (2.3) 150 (10.4)
3.0 (.21) 4.0 (.28) 4.8 (.33)
3.5 (.24) 7.0 (.48) 12.5 (.86)
5.0 (.35) 10.5 (.72) 31.9 (2.2)
6.5 (.45) 15 (1.0) 39.0 (2.7)
10.5 (.72) 27.5 (1.9) 110 (7.6)
3.0 (.21) 4.0 (.28) 4.8 (.33)
3.5 (.24) 7.0 (.48) 12.5 (.86)
5.0 (.35) 10.5 (.72) 31.9 (2.2)
6.5 (.45) 15.0 (1.0) 39.0 (2.7)
10.5 (.72) 27.5 (1.9) 110 (7.6)
sizes apply to NPTF.
MODEL NUMBER (see example below)
SAE
NPTF
H200 C - 002 - †
H200 C - 005 - †
H200 C - 010 - †
H200 C - 020 - †
H600 C - 001 - †
H600 C - 002 - †
H600 C - 005 - †
H600 C - 010 - †
H600 C - 015 - †
H700 C - 002 - †
H700 C - 005 - †
H700 C - 010 - †
H700 C - 020 - †
H700 C - 030 - †
H760 C - 002 - †
H760 C - 005 - †
H760 C - 010 - †
H760 C - 020 - †
H760 C - 030 - †
H760 C - 040 - †
H760 C - 050 - †
H800 C - 030 - †
H800 C - 050 - †
H800 C - 075 - †
H800 C - 100 - †
H800 C - 150 - †
H860 C - 030 - †
H860 C - 050 - †
H860 C - 075 - †
H860 C - 100 - †
H860 C - 150 - †
H201 C - 002 - †
H201 C - 005 - †
H201 C - 010 - †
H201 C - 020 - †
H601 C - 001 - †
H601 C - 002 - †
H601 C - 005 - †
H601 C - 010 - †
H601 C - 015 - †
H701 C - 002 - †
H701 C - 005 - †
H701 C - 010 - †
H701 C - 020 - †
H701 C - 030 - †
H761 C - 002 - †
H761 C - 005 - †
H761 C - 010 - †
H761 C - 020 - †
H761 C - 030 - †
H761 C - 040 - †
H761 C - 050 - †
H801 C - 030 - †
H801 C - 050 - †
H801 C - 075 - †
H801 C - 100 - †
H801 C - 150 - †
H861 C - 030 - †
H861 C - 050 - †
H861 C - 075 - †
H861 C - 100 - †
H861 C - 150 - †
PRESSURE
OPTIONS
RATING
REVERSE
FLOW
5000 PSI
Not
Available
3000 PSI
RF
2500 PSI
RF
2500 PSI
RF
2450 PSI
RF
2450 PSI
RF
(example) H 701 C - 030 - RF
HIGH TEMP. FLOW METERS
FLOW-ALERT FLOW SWITCHES
FLOW TRANSMITTERS
PAGES 26
and 29
PAGE 30
PAGE 6
REDUCE MAINTENANCE COSTS
FAX 800-245-3569
5
Canadian Registered High Temperature
Flow Meters For Petroleum Fluids
• Direct reading
shock and vibration
• Calibrated for .876 S.G.
• CRN: 0F14981.5
SPECIFICATIONS:
MATERIALS:
COMMON PARTS:
Spider Plate: T316 SS
Retaining Spring: SAE 1070/1090 Carbon Steel
Spring: T302 SS
Indicator: Nickel-plated Carbon Steel
Fasteners: T303 SS
Internal Magnet: Teflon® Coated Alnico 8
®
Seals: Viton
Bumper: 2011 - T3 Anodized Aluminum
Scale Support: T316 SS Guard: Cylindrical Pyrex® Glass
Scale: Polymide
End Caps: 2011 - T3 Anodized Aluminum
THREADS: SAE J1926/1, NPTF ANSI B2.2
TEMPERATURE RANGE: -20 to +400 °F (-29 to +205 °C ) Continuous
+400 to +500 °F (+205 to +260 °C ) Intermittent
PRESSURE RATING:
For detailed differential pressure charts, see the Hedland full-line catalog.
REPEATABILITY: ±1%
to flow in the primary flow direction in the same manner as the standard design. Flow
in the reverse direction causes the lower cone shuttle to shift, moving it below the
sharp-edged piston orifice, which allows the fluid to flow freely in the reverse direction.
DIMENSIONS:
A
B
NOMINAL LENGTH
PORT SIZE in (mm)
C
WIDTH
in (mm)
D
FLATS
in (mm)
¼ (SAE 6)
6.60 (168)
2.01 (53)
1.25 (32)
½ (SAE 10)
6.60 (168)
2.01 (53)
1.25 (32)
¾ (SAE 12)
7.20 (183)
2.48 (63)
1.50 (38)
1 (SAE 16)
7.20 (183)
2.48 (63)
1.75 (44)
1¼ (SAE 20) 12.20 (310) 4.20 (105)
2.75 (70)
1½ (SAE 24) 12.20 (310) 4.20 (105)
2.75 (70)
Pyrex is a registered trademark of Corning, Inc.
Teflon is a registered trademark of E.I. DuPont de Nemours & Co.
6 TEL. 800-433-5263
IMPROVE EFFICIENCY
Canadian Registration High Temperature
Flow Meters For Petroleum Fluids
PRESSURE DROP
100% REVERSE
50%
FLOW 100% FLOW
GPM
LPM
FLOW
SAE
NPTF
¼"
0.1 - 1.0 0.5 - 3.75 4.0 (.28) 9.0 (.62)
H200 C - 010 - HT H201 C - 010 - HT
SAE 6 0.2 - 2.0 1.0 - 7.5 6.0 (.41) 13 (.90)
H200 C - 020 - HT H201 C - 020 - HT
0.1 - 1.0 0.5 - 3.75 2.0 (.14) 2.75 (.19) 5.2 (.36) H600 C - 001 - HT H601 C - 001 - HT
0.2 - 2.0 1.0 - 7.5 2.0 (.14) 3.0 (.21) 9.6 (.66) H600 C - 002 - HT H601 C - 002 - HT
½"
3.0 (.21) 6.0 (.41) 4.8 (.33) H600 C - 005 - HT H601 C - 005 - HT
0.5 - 5.0 2 - 19
SAE 10
4.0 (.28) 9.5 (.66) 23.0 (1.6) H600 C - 010 - HT H601 C - 010 - HT
5 - 38
1 - 10
6.5 (.45) 18.5 (1.3) 55.2 (3.8) H600 C - 015 - HT H601 C - 015 - HT
4 - 56
1 - 15
0.2 - 2.0 1 - 7.5 1.0 (.07) 2.0 (.14) 2.9 (.20) H700 C - 002 - HT H701 C - 002 - HT
2.5 (.17) 3.5(.24) 5.3 (.37) H700 C - 005 - HT H701 C - 005 - HT
0.5 - 5.0 2 - 19
¾"
3.5 (.24) 9.0 (.62) 8.8 (.61) H700 C - 010 - HT H701 C - 010 - HT
5 - 38
1 - 10
SAE 12
10 - 76 4.0 (.28) 9.0 (.62) 18.0 (1.24) H700 C - 020 - HT H701 C - 020 - HT
2 - 20
3 - 30 10 - 115 7.0 (.48) 16.5 (1.1) 45.1 (3.11) H700 C - 030 - HT H701 C - 030 - HT
0.2 - 2.0 1 - 7.5 1.0 (.07) 2.0 (.14) 2.9 (.20) H760 C - 002 - HT H761 C - 002 - HT
2.5 (.17) 3.5(.24) 5.3 (.37) H760 C - 005 - HT H761 C - 005 - HT
0.5 - 5.0 2 - 19
3.5 (.24) 9.0 (.62) 8.8 (.61) H760 C - 010 - HT H761 C - 010 - HT
5 - 38
1 - 10
1"
10 - 76 4.0 (.28) 9.0 (.62) 18.0 (1.24) H760 C - 020 - HT H761 C - 020 - HT
2 - 20
SAE 16
3 - 30 10 - 115 7.0 (.48) 16.5 (1.1) 45.1 (3.11) H760 C - 030 - HT H761 C - 030 - HT
4 - 40 15 - 150 9.0 (.62) 24.0 (1.7) 87.5 (6.04) H760 C - 040 - HT H761 C - 040 - HT
5 - 50 20 - 190 12.5 (.86) 34.0 (2.3) 150 (10.4) H760 C - 050 - HT H761 C - 050 - HT
3 - 30 10 - 110 3.0 (.21) 4.0 (.28) 4.8 (.33) H800 C - 030 - HT H801 C - 030 - HT
5 - 50 20 - 190 3.5 (.24) 7.0 (.48) 12.5 (.86) H800 C - 050 - HT H801 C - 050 - HT
1¼"
10 - 75 40 - 280 5.0 (.35) 10.5 (.72) 31.9 (2.2) H800 C - 075 - HT H801 C - 075 - HT
SAE 20
10 - 100 50 - 380 6.5 (.45) 15 (1.0) 39.0 (2.7) H800 C - 100 - HT H801 C - 100 - HT
10 - 150 50 - 560 10.5 (.72) 27.5 (1.9) 110 (7.6) H800 C - 150 - HT H801 C - 150 - HT
3 - 30 10 - 110 3.0 (.21) 4.0 (.28) 4.8 (.33) H860 C - 030 - HT H861 C - 030 - HT
5 - 50 20 - 190 3.5 (.24) 7.0 (.48) 12.5 (.86) H860 C - 050 - HT H861 C - 050 - HT
1½"
10 - 75 40 - 280 5.0 (.35) 10.5 (.72) 31.9 (2.2) H860 C - 075 - HT H861 C - 075 - HT
SAE 24
10 - 100 50 - 380 6.5 (.45) 15 (1.0) 39.0 (2.7) H860 C - 100 - HT H861 C - 100 - HT
10 - 150 50 - 560 10.5 (.72 27.5 (1.9) 110 (7.6) H860 C - 150 - HT H861 C - 150 - HT
Fractional sizes apply to NPTF.
NOMINAL
PORT
SIZE
FLOW RANGE
PRESSURE
OPTIONS
RATING
REVERSE
FLOW
3000 PSI
Not
Available
3000 PSI
HR
2350 PSI
HR
2350 PSI
HR
2175 PSI
HR
2175 PSI
HR
(example) H 701 C - 030 - HR
NOTE: HT suffix represents standard high temperature configuration. For
reverse flow high temperature, replace HT with HR suffix.
REDUCE DOWNTIME
FAX 800-245-3569
7
For Phosphate Ester Fluids
• Direct reading
shock and vibration
• Calibrated for 1.18 S.G.
• CRN: 0F14981.5
SPECIFICATIONS:
MATERIALS:
COMMON PARTS:
Spider Plate: T316 SS Retaining Spring: SAE 1070/1090 Carbon Steel
Spring: T302 SS
Fasteners: T303 SS
Guard Seal / Bumper: EPR
Pressure Seals: EPR
Scale Support: 6063 - T6 Aluminum
Guard: Nylon
End Caps: Nylon ST
TEMPERATURE RANGE: -20 to +240 °F (-29 to +116 °C) for higher temp. meters, see page 10.
PRESSURE RATING:
REPEATABILITY: ± 1%
DIMENSIONS:
A
B
NOMINAL LENGTH
PORT SIZE in (mm)
E
C
WIDTH
in (mm)
D
DEPTH
in (mm)
E
OFFSET
in (mm)
F
FLATS
in (mm)
¼ (SAE 6)
4.8 (122)
1.68 (43)
1.90 (48)
.84 (21)
.88 (22)
½ (SAE 10)
6.6 (168)
2.07 (53)
2.40 (61)
1.04 (26)
1.25 (32)
¾ (SAE 12)
7.2 (183)
2.48 (63)
2.85 (72)
1.24 (32)
1.50 (38)
1 (SAE 16)
7.2 (183)
2.48 (63)
2.85 (72)
1.24 (32)
1.75 (44)
1¼ (SAE 20) 12.2 (310) 4.12 (105) 4.72 (120) 2.06 (52)
2.75 (70)
1½ (SAE 24) 12.2 (310) 4.12 (105) 4.72 (120) 2.06 (52)
2.75 (70)
8 TEL. 800-433-5263
RUGGED CONSTRUCTION
A
C
E
F
D
B
NOMINAL
PORT
SIZE
¼"
SAE 6
½"
SAE 10
¾"
SAE 12
1"
SAE 16
1¼"
SAE 20
1½"
SAE 24
FLOW RANGE
GPM
LPM
.02 - 0.2
.05 - 0.5
0.1 - 1.0
0.2 - 2.0
0.1 - 1.0
0.2 - 2.0
0.5 - 5.0
1 - 10
1 - 15
0.2 - 2.0
0.5 - 5.0
1 - 10
2 - 20
3 - 30
0.2 - 2.0
0.5 - 5.0
1 - 10
2 - 20
3 - 30
4 - 40
5 - 50
3 - 30
5 - 50
10 - 75
10 - 100
10 - 150
3 - 30
5 - 50
10 - 75
10 - 100
10 - 150
0.1 - 0.75
0.2 - 1.9
0.5 - 3.75
1.0 - 7.5
0.5 - 3.75
1 - 7.5
2 - 19
5 - 38
4 - 56
1 - 7.5
2 - 19
5 - 38
10 - 76
10 - 115
1 - 7.5
2 - 19
5 - 38
10 - 76
10 - 115
15 - 150
20 - 190
10 - 110
20 - 190
40 - 280
50 - 380
50 - 560
10 - 110
20 - 190
40 - 280
50 - 380
50 - 560
PRESSURE DROP
100% REVERSE
50%
FLOW 100% FLOW
FLOW
3.5 (.24) 4.0 (.28)
3.0 (.21) 5.0 (.35)
4.0 (.28) 9.0 (.62)
6.0 (.41) 13 (.90)
2.0 (.14) 2.75 (.19) 5.2 (.36)
2.0 (.14) 3.0 (.21) 9.6 (.66)
3.0 (.21) 6.0 (.41) 4.8 (.33)
4.0 (.28) 9.5 (.66) 23.0 (1.6)
6.5 (.45) 18.5 (1.3) 55.2 (3.8)
1.0 (.07) 2.0 (.14) 2.9 (.20)
2.5 (.17) 3.5 (.24) 5.3 (.37)
3.5 (.24) 9.0 (.62) 8.8 (.61)
4.0 (.28) 9.0 (.62) 18.0 (1.24)
7.0 (.48) 16.5 (1.1) 45.1 (3.11)
1.0 (.07) 2.0 (.14) 2.9 (.20)
2.5 (.17) 3.5 (.24) 5.3 (.37)
3.5 (.24) 9.0 (.62) 8.8 (.61)
4.0 (.28) 9.0 (.62) 18.0 (1.24)
7.0 (.48) 16.5 (1.1) 45.1 (3.11)
9.0 (.62) 24.0 (1.7) 87.5 (6.04)
12.5 (.86) 34.0 (2.3) 150 (10.4)
3.0 (.21) 4.0 (.28) 4.8 (.33)
3.5 (.24) 7.0 (.48) 12.5 (.86)
5.0 (.35) 10.5 (.72) 31.9 (2.2)
6.5 (.45) 15.0 (1.0) 39.0 (2.7)
10.5 (.72) 27.5 (1.9) 110 (7.6)
3.0 (.21) 4.0 (.28) 4.8 (.33)
3.5 (.24) 7.0 (.48) 12.5 (.86)
5.0 (.35) 10.5 (.72) 31.9 (2.2)
6.5 (.45) 15.0 (1.0) 39.0 (2.7)
10.5 (.72) 27.5 (1.9) 110 (7.6)
SAE
NPTF
H294 C - 002 - †
H294 C - 005 - †
H294 C - 010 - †
H294 C - 020 - †
H694 C - 001 - †
H694 C - 002 - †
H694 C - 005 - †
H694 C - 010 - †
H694 C - 015 - †
H794 C - 002 - †
H794 C - 005 - †
H794 C - 010 - †
H794 C - 020 - †
H794 C - 030 - †
H764 C - 002 - †
H764 C - 005 - †
H764 C - 010 - †
H764 C - 020 - †
H764 C - 030 - †
H764 C - 040 - †
H764 C - 050 - †
H894 C - 030 - †
H894 C - 050 - †
H894 C - 075 - †
H894 C - 100 - †
H894 C - 150 - †
H864 C - 030 - †
H864 C - 050 - †
H864 C - 075 - †
H864 C - 100 - †
H864 C - 150 - †
H295 C - 002 - †
H295 C - 005 - †
H295 C - 010 - †
H295 C - 020 - †
H695 C - 001 - †
H695 C - 002 - †
H695 C - 005 - †
H695 C - 010 - †
H695 C - 015 - †
H795 C - 002 - †
H795 C - 005 - †
H795 C - 010 - †
H795 C - 020 - †
H795 C - 030 - †
H765 C - 002 - †
H765 C - 005 - †
H765 C - 010 - †
H765 C - 020 - †
H765 C - 030 - †
H765 C - 040 - †
H765 C - 050 - †
H895 C - 030 - †
H895 C - 050 - †
H895 C - 075 - †
H895 C - 100 - †
H895 C - 150 - †
H865 C - 030 - †
H865 C - 050 - †
H865 C - 075 - †
H865 C - 100 - †
H865 C - 150 - †
PRESSURE
OPTIONS
RATING
REVERSE
FLOW
5000 PSI
Not
Available
3000 PSI
RF
2500 PSI
RF
2500 PSI
RF
2450 PSI
RF
2450 PSI
RF
(example) H 795 C - 030 - RF
FLOW TRANSMITTERS
PAGE 10
PAGES 26
and 29
PAGE 30
BRIGHT EASY-TO-READ SCALES
FAX 800-245-3569
9
Flow Meters For Phosphate Ester Fluids
• Direct reading
shock and vibration
• CRN: 0F14981.5
SPECIFICATIONS:
MATERIALS:
COMMON PARTS:
Spring: T302 SS
Fasteners: T303 SS
Seals: EPR
Scale: Polymide
PRESSURE RATING:
REPEATABILITY: ±1%
the sharp-edged piston orifice, which allows the fluid to flow freely in the reverse direction.
DIMENSIONS:
A
B
NOMINAL LENGTH
PORT SIZE in (mm)
C
WIDTH
in (mm)
D
FLATS
in (mm)
¼ (SAE 6)
6.60 (168)
2.01 (53)
1.25 (32)
½ (SAE 10)
6.60 (168)
2.01 (53)
1.25 (32)
¾ (SAE 12)
7.20 (183)
2.48 (63)
1.50 (38)
1 (SAE 16)
7.20 (183)
2.48 (63)
1.75 (44)
1¼ (SAE 20) 12.20 (310) 4.20 (105)
2.75 (70)
1½ (SAE 24) 12.20 (310) 4.20 (105)
2.75 (70)
10 TEL. 800-433-5263
GOOD VISCOSITY STABILITY
Flow Meters For Phosphate Ester Fluids
NOMINAL
PORT
SIZE
¼"
SAE 6
½"
SAE 10
¾"
SAE 12
1"
SAE 16
1¼"
SAE 20
1½"
SAE 24
FLOW RANGE
GPM
LPM
0.1 - 1.0
0.2 - 2.0
0.1 - 1.0
0.2 - 2.0
0.5 - 5.0
1 - 10
1 - 15
0.2 - 2.0
0.5 - 5.0
1 - 10
2 - 20
3 - 30
0.2 - 2.0
0.5 - 5.0
1 - 10
2 - 20
3 - 30
4 - 40
5 - 50
3 - 30
5 - 50
10 - 75
10 - 100
10 - 150
3 - 30
5 - 50
10 - 75
10 - 100
10 - 150
0.5 - 3.75
1.0 - 7.5
0.5 - 3.75
1 - 7.5
2 - 19
5 - 38
4 - 56
1 - 7.5
2 - 19
5 - 38
10 - 76
10 - 115
1 - 7.5
2 - 19
5 - 38
10 - 76
10 - 115
15 - 150
20 - 190
10 - 110
20 - 190
40 - 280
50 - 380
50 - 560
10 - 110
20 - 190
40 - 280
50 - 380
50 - 560
PRESSURE DROP
100% REVERSE
50%
FLOW 100% FLOW
FLOW
4.0 (.28) 9.0 (.62)
6.0 (.41) 13 (.90)
2.0 (.14) 2.75 (.19) 5.2 (.36)
2.0 (.14) 3.0 (.21) 9.6 (.66)
3.0 (.21) 6.0 (.41) 4.8 (.33)
4.0 (.28) 9.5 (.66) 23.0 (1.6)
6.5 (.45) 18.5 (1.3) 55.2 (3.8)
1.0 (.07) 2.0 (.14) 2.9 (.20)
2.5 (.17) 3.5 (.24) 5.3 (.37)
3.5 (.24) 9.0 (.62) 8.8 (.61)
4.0 (.28) 9.0 (.62) 18.0 (1.24)
7.0 (.48) 16.5 (1.1) 45.1 (3.11)
1.0 (.07) 2.0 (.14) 2.9 (.20)
2.5 (.17) 3.5 (.24) 5.3 (.37)
3.5 (.24) 9.0 (.62) 8.8 (.61)
4.0 (.28) 9.0 (.62) 18.0 (1.24)
7.0 (.48) 16.5 (1.1) 45.1 (3.11)
9.0 (.62) 24.0 (1.7) 87.5 (6.04)
12.5 (.86) 34.0 (2.3) 150 (10.4)
3.0 (.21) 4.0 (.28) 4.8 (.33)
3.5 (.24) 7.0 (.48) 12.5 (.86)
5.0 (.35) 10.5 (.72) 31.9 (2.2)
6.5 (.45) 15.0 (1.0) 39.0 (2.7)
10.5 (.72) 27.5 (1.9) 110 (7.6)
3.0 (.21) 4.0 (.28) 4.8 (.33)
3.5 (.24) 7.0 (.48) 12.5 (.86)
5.0 (.35) 10.5 (.72) 31.9 (2.2)
6.5 (.45) 15.0 (1.0) 39.0 (2.7)
10.5 (.72) 27.5 (1.9) 110 (7.6)
Fractional sizes apply to NPTF
and BSPP.
SAE
NPTF
H294 C - 010 - HT
H294 C - 020 - HT
H694 C - 001 - HT
H694 C - 002 - HT
H694 C - 005 - HT
H694 C - 010 - HT
H694 C - 015 - HT
H794 C - 002 - HT
H794 C - 005 - HT
H794 C - 010 - HT
H794 C - 020 - HT
H794 C - 030 - HT
H764 C - 002 - HT
H764 C - 005 - HT
H764 C - 010 - HT
H764 C - 020 - HT
H764 C - 030 - HT
H764 C - 040 - HT
H764 C - 050 - HT
H894 C - 030 - HT
H894 C - 050 - HT
H894 C - 075 - HT
H894 C - 100 - HT
H894 C - 150 - HT
H864 C - 030 - HT
H864 C - 050 - HT
H864 C - 075 - HT
H864 C - 100 - HT
H864 C - 150 - HT
H295 C - 010 - HT
H295 C - 020 - HT
H695 C - 001 - HT
H695 C - 002 - HT
H695 C - 005 - HT
H695 C - 010 - HT
H695 C - 015 - HT
H795 C - 002 - HT
H795 C - 005 - HT
H795 C - 010 - HT
H795 C - 020 - HT
H795 C - 030 - HT
H765 C - 002 - HT
H765 C - 005 - HT
H765 C - 010 - HT
H765 C - 020 - HT
H765 C - 030 - HT
H765 C - 040 - HT
H765 C - 050 - HT
H895 C - 030 - HT
H895 C - 050 - HT
H895 C - 075 - HT
H895 C - 100 - HT
H895 C - 150 - HT
H865 C - 030 - HT
H865 C - 050 - HT
H865 C - 075 - HT
H865 C - 100 - HT
H865 C - 150 - HT
PRESSURE
OPTIONS
RATING
REVERSE
FLOW
3000 PSI
Not
Available
3000 PSI
HR
2350 PSI
HR
2350 PSI
HR
2175 PSI
HR
2175 PSI
HR
(example) H 795 C - 030 - HR
NOTE: HT suffix represents standard high temperature configuration. For
reverse flow high temperature, replace HT with HR suffix.
ACCURATE OVER A WIDE VISCOSITY RANGE
FAX 800-245-3569 11
For Water-based Fluids (Water/Oil Emulsions)
• Direct reading
shock and vibration
• For 80/20 and other
water/oil emulsions
SPECIFICATIONS:
MATERIALS:
COMMON PARTS:
Retaining Ring: T316 SS
Spider Plate: T316 SS Retaining Spring: T316 SS
Spring: T302 SS
Fasteners: T303 SS
®
Pressure Seals: Viton Scale Support: 6063 - T6 Aluminum
PRESSURE RATING:
PRESSURE DROP: See Ordering Information Table, page 13.
REPEATABILITY: ±1%
• CRN: 0F14981.5
DIMENSIONS:
A
B
NOMINAL LENGTH
PORT SIZE in (mm)
C
WIDTH
in (mm)
D
DEPTH
in (mm)
E
OFFSET
in (mm)
F
FLATS
in (mm)
¼ (SAE 6)
4.8 (122)
1.68 (43)
1.90 (48)
.84 (21)
.88 (22)
½ (SAE 10)
6.6 (168)
2.07 (53)
2.40 (61)
1.04 (26)
1.25 (32)
¾ (SAE 12)
7.2 (183)
2.48 (63)
2.85 (72)
1.24 (32)
1.50 (38)
1 (SAE 16)
7.2 (183)
2.48 (63)
2.85 (72)
1.24 (32)
1.75 (44)
1¼ (SAE 20) 12.2 (310) 4.12 (105) 4.72 (120) 2.06 (52)
2.75 (70)
1½ (SAE 24) 12.2 (310) 4.12 (105) 4.72 (120) 2.06 (52)
2.75 (70)
12 TEL. 800-433-5263
SPECIAL CALIBRATIONS AVAILABLE
E
A
C
E
F
D
B
NOMINAL
PORT
SIZE
¼"
SAE 6
½"
SAE 10
¾"
SAE 12
1"
SAE 16
1¼"
SAE 20
1½"
SAE 24
FLOW RANGE
GPM
LPM
.02 - 0.2
.05 - 0.5
0.1 - 1.0
0.2 - 2.0
0.1 - 1.0
0.2 - 2.0
0.5 - 5.0
1 - 10
1 - 15
0.2 - 2.0
0.5 - 5.0
1 - 10
2 - 20
3 - 30
0.2 - 2.0
0.5 - 5.0
1 - 10
2 - 20
3 - 30
4 - 40
5 - 50
3 - 30
5 - 50
10 - 75
10 - 100
10 - 150
3 - 30
5 - 50
10 - 75
10 - 100
10 - 150
0.1 - 0.75
0.2 - 1.9
0.5 - 3.75
1 - 7.5
0.5 - 3.75
1 - 7.5
2 - 19
5 - 38
4 - 56
1 - 7.5
2 - 19
5 - 38
10 - 76
10 - 115
1 - 7.5
2 - 19
5 - 38
10 - 76
10 - 115
15 - 150
20 - 190
10 - 110
20 - 190
40 - 280
50 - 380
50 - 560
10 - 110
20 - 190
40 - 280
50 - 380
50 - 560
PRESSURE DROP
100% REVERSE
50%
FLOW 100% FLOW
FLOW
3.5 (.24) 4.0 (.28)
3.0 (.21) 5.0 (.35)
4.0 (.28) 9.0 (.62)
6.0 (.41) 13 (.90)
2.0 (.14) 2.75 (.19) 5.2 (.36)
2.0 (.14) 3.0 (.21) 9.6 (.66)
3.0 (.21) 6.0 (.41) 4.8 (.33)
4.0 (.28) 9.5 (.66) 23.0 (1.6)
6.5 (.45) 18.5 (1.3) 55.2 (3.8)
1.0 (.07) 2.0 (.14) 2.9 (.20)
2.5 (.17) 3.5 (.24) 5.3 (.37)
3.5 (.24) 9.0 (.62) 8.8 (.61)
4.0 (.28) 9.0 (.62) 18.0 (1.24)
7.0 (.48) 16.5 (1.1) 45.1 (3.11)
1.0 (.07) 2.0 (.14) 2.9 (.20)
2.5 (.17) 3.5 (.24) 5.3 (.37)
3.5 (.24) 9.0 (.62) 8.8 (.61)
4.0 (.28) 9.0 (.62) 18.0 (1.24)
7.0 (.48) 16.5 (1.1) 45.1 (3.11)
9.0 (.62) 24 (1.7) 87.5 (6.04)
12.5 (.86) 34 (2.3) 150 (10.4)
3.0 (.21) 4.0 (.28) 4.8 (.33)
3.5 (.24) 7.0 (.48) 12.5 (.86)
5.0 (.35) 10.5 (.72) 31.9 (2.2)
6.5 (.45) 15.0 (1.0) 39.0 (2.7)
10.5 (.72) 27.5 (1.9) 110 (7.6)
3.0 (.21) 4.0 (.28) 4.8 (.33)
3.5 (.24) 7.0 (.48) 12.5 (.86)
5.0 (.35) 10.5 (.72) 31.9 (2.2)
6.5 (.45) 15.0 (1.0) 39.0 (2.7)
10.5 (.72) 27.5 (1.9) 110 (7.6)
Fractional sizes apply to NPTF.
SAE
NPTF
H212 C - 002 - †
H212 C - 005 - †
H212 C - 010 - †
H212 C - 020 - †
H612 C - 001 - †
H612 C - 002 - †
H612 C - 005 - †
H612 C - 010 - †
H612 C - 015 - †
H712 C - 002 - †
H712 C - 005 - †
H712 C - 010 - †
H712 C - 020 - †
H712 C - 030 - †
H782 C - 002 - †
H782 C - 005 - †
H782 C - 010 - †
H782 C - 020 - †
H785 C - 030 - †
H782 C - 040 - †
H782 C - 050 - †
H812 C - 030 - †
H812 C - 050 - †
H812 C - 075 - †
H812 C - 100 - †
H812 C - 150 - †
H882 C - 030 - †
H882 C - 050 - †
H882 C - 075 - †
H882 C - 100 - †
H882 C - 150 - †
H213 C - 002 - †
H213 C - 005 - †
H213 C - 010 - †
H213 C - 020 - †
H613 C - 001 - †
H613 C - 002 - †
H613 C - 005 - †
H613 C - 010 - †
H613 C - 015 - †
H713 C - 002 - †
H713 C - 005 - †
H713 C - 010 - †
H713 C - 020 - †
H713 C - 030 - †
H783 C - 002 - †
H783 C - 005 - †
H783 C - 010 - †
H783 C - 020 - †
H783 C - 030 - †
H783 C - 040 - †
H783 C - 050 - †
H813 C - 030 - †
H813 C - 050 - †
H813 C - 075 - †
H813 C - 100 - †
H813 C - 150 - †
H883 C - 030 - †
H883 C - 050 - †
H883 C - 075 - †
H883 C - 100 - †
H883 C - 150 - †
PRESSURE
OPTIONS
RATING
REVERSE
FLOW
5000 PSI
Not
Available
3000 PSI
RF
2500 PSI
RF
2500 PSI
RF
2450 PSI
RF
2450 PSI
RF
(example) H 713 C - 030 - RF
FLOW TRANSMITTERS
PAGE 14
PAGES 26
and 29
PAGE 30
TRACEABLE TO NIST STANDARDS
FAX 800-245-3569 13
Flow Meters For Water-based Fluids (Water/Oil Emulsions)
• Direct reading
shock and vibration
• For 80/20 and other
water/oil emulsions
• CRN: 0F14981.5
SPECIFICATIONS:
MATERIALS:
COMMON PARTS:
Retaining Spring: T316 SS
Spring: T302 SS
Fasteners: T303 SS
Seals: Viton®
Scale: Polymide
PRESSURE RATING:
REPEATABILITY: ±1%
Flow in the reverse direction causes the lower cone shuttle to shift, moving it below the
sharp-edged piston orifice, which allows the fluid to flow freely in the reverse direction.
DIMENSIONS:
A
B
NOMINAL LENGTH
PORT SIZE in (mm)
C
WIDTH
in (mm)
D
FLATS
in (mm)
¼ (SAE 6)
6.60 (168)
2.01 (53)
1.25 (32)
½ (SAE 10)
6.60 (168)
2.01 (53)
1.25 (32)
¾ (SAE 12)
7.20 (183)
2.48 (63)
1.50 (38)
1 (SAE 16)
7.20 (183)
2.48 (63)
1.75 (44)
1¼ (SAE 20) 12.20 (310) 4.20 (105) 2.75 (70)
1½ (SAE 24) 12.20 (310) 4.20 (105) 2.75 (70)
14 TEL. 800-433-5263
FULLY STAFFED TECHNICAL SERVICES DEPARTMENT
Flow Meters For Water-based Fluids (Water/Oil Emulsions)
NOMINAL
PORT
SIZE
¼"
SAE 6
½"
SAE 10
¾"
SAE 12
1"
SAE 16
1¼"
SAE 20
1½"
SAE 24
FLOW RANGE
PRESSURE DROP
100% REVERSE
50%
FLOW 100% FLOW
GPM
LPM
FLOW
0.1 - 1.0 0.5 - 3.75 4.0 (.28) 9.0 (.62)
0.2 - 2.0 1.0 - 7.5 6.0 (.41) 13.0 (.90)
0.1 - 1.0 0.5 - 3.75 2.0 (.14) 2.75 (.19) 5.2 (.36)
2.0 (.14) 3.0 (.21) 9.6 (.66)
0.2 - 2.0 1 - 7.5
3.0 (.21) 6.0 (.41) 4.8 (.33)
0.5 - 5.0 2 - 19
4.0 (.28) 9.5 (.66) 23.0 (1.6)
5 - 38
1 - 10
6.5 (.45) 18.5 (1.3) 55.2 (3.8)
4 - 56
1 - 15
1.0 (.07) 2.0 (.14) 2.9 (.20)
0.2 - 2.0 1 - 7.5
2.5 (.17) 3.5 (.24) 5.3 (.37)
0.5 - 5.0 2 - 19
3.5 (.24) 9.0 (.62) 8.8 (.61)
5 - 38
1 - 10
10 - 76 4.0 (.28) 9.0 (.62) 18.0 (1.24)
2 - 20
3 - 30 10 - 115 7.0 (.48) 16.5 (1.1) 45.1 (3.11)
1.0 (.07) 2.0 (.14) 2.9 (.20)
0.2 - 2.0 1 - 7.5
2.5 (.17) 3.5 (.24) 5.3 (.37)
0.5 - 5.0 2 - 19
3.5 (.24) 9.0 (.62) 8.8 (.61)
5 - 38
1 - 10
10 - 76 4.0 (.28) 9.0 (.62) 18.0 (1.24)
2 - 20
3 - 30 10 - 115 7.0 (.48) 16.5 (1.1) 45.1 (3.11)
4 - 40 15 - 150 9.0 (.62) 24.0 (1.7) 87.5 (6.04)
5 - 50 20 - 190 12.5 (.86) 34.0 (2.3) 150 (10.4)
3 - 30 10 - 110 3.0 (.21) 4.0 (.28) 4.8 (.33)
5 - 50 20 - 190 3.5 (.24) 7.0 (.48) 12.5 (.86)
10 - 75 40 - 280 5.0 (.35) 10.5 (.72) 31.9 (2.2)
10 - 100 50 - 380 6.5 (.45) 15.0 (1.0) 39.0 (2.7)
10 - 150 50 - 560 10.5 (.72) 27.5 (1.9) 110 (7.6)
3 - 30 10 - 110 3.0 (.21) 4.0 (.28) 4.8 (.33)
5 - 50 20 - 190 3.5 (.24) 7.0 (.48) 12.5 (.86)
10 - 75 40 - 280 5.0 (.35) 10.5 (.72) 31.9 (2.2)
10 - 100 50 - 380 6.5 (.45) 15.0 (1.0) 39.0 (2.7)
10 - 150 50 - 560 10.5 (.72) 27.5 (1.9) 110 (7.6)
SAE
NPTF
H212 C - 010 - HT
H212 C - 020 - HT
H612 C - 001 - HT
H612 C - 002 - HT
H612 C - 005 - HT
H612 C - 010 - HT
H612 C - 015 - HT
H712 C - 002 - HT
H712 C - 005 - HT
H712 C - 010 - HT
H712 C - 020 - HT
H712 C - 030 - HT
H782 C - 002 - HT
H782 C - 005 - HT
H782 C - 010 - HT
H782 C - 020 - HT
H782 C - 030 - HT
H782 C - 040 - HT
H782 C - 050 - HT
H812 C - 030 - HT
H812 C - 050 - HT
H812 C - 075 - HT
H812 C - 100 - HT
H812 C - 150 - HT
H882 C - 030 - HT
H882 C - 050 - HT
H882 C - 075 - HT
H882 C - 100 - HT
H882 C - 150 - HT
H213 C - 010 - HT
H213 C - 020 - HT
H613 C - 001 - HT
H613 C - 002 - HT
H613 C - 005 - HT
H613 C - 010 - HT
H613 C - 015 - HT
H713 C - 002 - HT
H713 C - 005 - HT
H713 C - 010 - HT
H713 C - 020 - HT
H713 C - 030 - HT
H783 C - 002 - HT
H783 C - 005 - HT
H783 C - 010 - HT
H783 C - 020 - HT
H783 C - 030 - HT
H783 C - 040 - HT
H783 C - 050 - HT
H813 C - 030 - HT
H813 C - 050 - HT
H813 C - 075 - HT
H813 C - 100 - HT
H813 C - 150 - HT
H883 C - 030 - HT
H883 C - 050 - HT
H883 C - 075 - HT
H883 C - 100 - HT
H883 C - 150 - HT
PRESSURE
OPTIONS
RATING
REVERSE
FLOW
3000 PSI
Not
Available
3000 PSI
HR
2350 PSI
HR
2350 PSI
HR
2175 PSI
HR
2175 PSI
HR
(example) H 713 C - 030 - HR
NOTE: HT suffix represents standard high temperature configuration.
For reverse flow high temperature, replace HT with HR suffix.
DEPENDABLE CUSTOMER SERVICE
FAX 800-245-3569 15
For Water and Other Liquids
• Direct reading
shock and vibration
• CRN: 0F14981.5
SPECIFICATIONS:
MATERIALS:
T316 Stainless body, C360 Brass piston and cone
COMMON PARTS:
Spring: T302 SS
Fasteners: T303 SS
Pressure Seals: Viton® Scale Support: 6063 - T6 Aluminum
Guard: Polycarbonate
End Caps: Nylon ST
PRESSURE RATING:
See Order Information Table.
REPEATABILITY: ±1%
E
A
C
DIMENSIONS:
A
B
NOMINAL LENGTH
PORT SIZE in (mm)
E
C
WIDTH
in (mm)
D
DEPTH
in (mm)
E
OFFSET
in (mm)
F
FLATS
in (mm)
¼ (SAE 6)
4.8 (122)
1.68 (43)
1.90 (48)
.84 (21)
.88 (22)
½ (SAE 10)
6.6 (168)
2.07 (53)
2.40 (61)
1.04 (26)
1.25 (32)
¾ (SAE 12)
7.2 (183)
2.48 (63)
2.85 (72)
1.24 (32)
1.50 (38)
1 (SAE 16)
7.2 (183)
2.48 (63)
2.85 (72)
1.24 (32)
1.75 (44)
1¼ (SAE 20) 12.2 (310) 4.12 (105) 4.72 (120) 2.06 (52)
2.75 (70)
1½ (SAE 24) 12.2 (310) 4.12 (105) 4.72 (120) 2.06 (52)
2.75 (70)
16 TEL. 800-433-5263
24-HOUR QUICK SHIP PROGRAM
F
D
B
For Water and Other Liquids
FLOW RANGE
NOMINAL
PORT
SIZE
¼"
SAE 6
½"
SAE 10
¾"
SAE 12
1"
SAE 16
1¼"
SAE 20
1½"
SAE 24
GPM
LPM
.02 - 0.2
.05 - 0.5
0.1 - 1.0
0.2 - 2.0
0.1 - 1.0
0.2 - 2.0
0.5 - 5.0
1 - 10
1 - 15
0.2 - 2.0
0.5 - 5.0
1 - 10
2 - 20
3 - 30
0.2 - 2.0
0.5 - 5.0
1 - 10
2 - 20
3 - 30
4 - 40
5 - 50
3 - 30
5 - 50
10 - 75
10 - 100
10 - 150
3 - 30
5 - 50
10 - 75
10 - 100
10 - 150
0.1 - 0.75
0.2 - 1.9
0.5 - 3.75
1 - 7.5
0.5 - 3.75
1 - 7.5
2 - 19
5 - 38
4 - 56
1 - 7.5
2 - 19
5 - 38
10 - 76
10 - 115
1 - 7.5
2 - 19
5 - 38
10 - 76
10 - 115
15 - 150
20 - 190
10 - 110
20 - 190
40 - 280
50 - 380
50 - 560
10 - 110
20 - 190
40 - 280
50 - 380
50 - 560
PRESSURE DROP
100%
50%
FLOW
FLOW
PSI (BAR)
PSI (BAR)
4.0 (.28)
3.5 (.24)
5.0 (.35)
3.0 (.21)
9.0 (.62)
4.0 (.28)
13 (.90)
6.0 (.41)
2.0 (.14) 2.75 (.19)
3.0 (.21)
2.0 (.14)
6.0 (.41)
3.0 (.21)
9.5 (.66)
4.0 (.28)
6.5 (.45) 18.5 (1.3)
2.0 (.14)
1.0 (.07)
3.5 (.24)
2.5 (.17)
9.0 (.62)
3.5 (.24)
9.0 (.62)
4.0 (.28)
7.0 (.48) 16.5 (1.1)
2.0 (.14)
1.0 (.07)
3.5 (.24)
2.5 (.17)
9.0 (.62)
3.5 (.24)
9.0 (.62)
4.0 (.28)
7.0 (.48) 16.5 (1.1)
24 (1.7)
9.0 (.62)
12.5 (.86) 34 (2.3)
4.0 (.28)
3.0 (.21)
7.0 (.48)
3.5 (.24)
5.0 (.35) 10.5 (.72)
6.5 (.45) 15.0 (1.0)
10.5 (.72) 27.5 (1.9)
4.0 (.28)
3.0 (.21)
7.0 (.48)
3.5 (.24)
5.0 (.35) 10.5 (.72)
6.5 (.45) 15.0 (1.0)
10.5 (.72) 27.5 (1.9)
SAE
NPTF
H204 C - 002
H204 C - 005
H204 C - 010
H204 C - 020
H604 C - 001
H604 C - 002
H604 C - 005
H604 C - 010
H604 C - 015
H704 C - 002
H704 C - 005
H704 C - 010
H704 C - 020
H704 C - 030
H754 C - 002
H754 C - 005
H754 C - 010
H754 C - 020
H754 C - 030
H754 C - 040
H754 C - 050
H804 C - 030
H804 C - 050
H804 C - 075
H804 C - 100
H804 C - 150
H854 C - 030
H854 C - 050
H854 C - 075
H854 C - 100
H854 C - 150
H205 C - 002
H205 C - 005
H205 C - 010
H205 C - 020
H605 C - 001
H605 C - 002
H605 C - 005
H605 C - 010
H605 C - 015
H705 C - 002
H705 C - 005
H705 C - 010
H705 C - 020
H705 C - 030
H755 C - 002
H755 C - 005
H755 C - 010
H755 C - 020
H755 C - 030
H755 C - 040
H755 C - 050
H805 C - 030
H805 C - 050
H805 C - 075
H805 C - 100
H805 C - 150
H855 C - 030
H855 C - 050
H855 C - 075
H855 C - 100
H855 C - 150
PRESSURE
RATING
5000 PSI
3000 PSI
2500 PSI
2500 PSI
2450 PSI
2450 PSI
 Fractional sizes apply to NPTF.
(example) H 705 C - 030
WATER-BASED FLUIDS
FLOW TRANSMITTERS
PAGE 12
PAGE 18
PAGES 26
and 29
PAGE 30
STANDARD 3- & 8-DAY DELIVERIES
FAX 800-245-3569 17
Flow Meters For Water and Other Liquids
• Direct reading
shock and vibration
• CRN: 0F14981.5
SPECIFICATIONS:
MATERIALS:
T316 Stainless body, C360 Brass piston and cone
COMMON PARTS:
Spring: T302 SS
Fasteners: T303 SS
®
Seals: Viton
Scale: Polymide
PRESSURE RATING:
REPEATABILITY: ±1%
DIMENSIONS:
A
B
NOMINAL LENGTH
PORT SIZE in (mm)
C
WIDTH
in (mm)
D
FLATS
in (mm)
¼ (SAE 6)
6.60 (168)
2.01 (53)
1.25 (32)
½ (SAE 10)
6.60 (168)
2.01 (53)
1.25 (32)
¾ (SAE 12)
7.20 (183)
2.48 (63)
1.50 (38)
1 (SAE 16)
7.20 (183)
2.48 (63)
1.75 (44)
1¼ (SAE 20) 12.20 (310) 4.20 (105) 2.75 (70)
1½ (SAE 24) 12.20 (310) 4.20 (105) 2.75 (70)
18 TEL. 800-433-5263
IMPROVE EFFICIENCY
Flow Meters For Water and Other Liquids
NOMINAL
PORT
SIZE
¼"
SAE 6
½"
SAE 10
¾"
SAE 12
1"
SAE 16
1¼"
SAE 20
1½"
SAE 24
FLOW RANGE
GPM
LPM
0.1 - 1.0
0.2 - 2.0
0.1 - 1.0
0.2 - 2.0
0.5 - 5.0
1 - 10
1 - 15
0.2 - 2.0
0.5 - 5.0
1 - 10
2 - 20
3 - 30
0.2 - 2.0
0.5 - 5.0
1 - 10
2 - 20
3 - 30
4 - 40
5 - 50
3 - 30
5 - 50
10 - 75
10 - 100
10 - 150
3 - 30
5 - 50
10 - 75
10 - 100
10 - 150
0.5 - 3.75
1.0 - 7.5
0.5 - 3.75
1.0 - 7.5
2 - 19
5 - 38
4 - 56
1 - 7.5
2 - 19
5 - 38
10 - 76
10 - 115
1 - 7.5
2 - 19
5 - 38
10 - 76
10 - 115
15 - 150
20 - 190
10 - 110
20 - 190
40 - 280
50 - 380
50 - 560
10 - 110
20 - 190
40 - 280
50 - 380
50 - 560
PRESSURE DROP
100%
50%
FLOW
FLOW
PSI (BAR)
PSI (BAR)
4.0 (.28)
9.0 (.62)
6.0 (.41) 13.0 (.90)
2.0 (.14) 2.75 (.19)
3.0 (.21)
2.0 (.14)
6.0 (.41)
3.0 (.21)
9.5 (.66)
4.0 (.28)
6.5 (.45) 18.5 (1.3)
2.0 (.14)
1.0 (.07)
3.5 (.24)
2.5 (.17)
9.0 (.62)
3.5 (.24)
9.0 (.62)
4.0 (.28)
7.0 (.48) 16.5 (1.1)
2.0 (.14)
1.0 (.07)
3.5 (.24)
2.5 (.17)
9.0 (.62)
3.5 (.24)
9.0 (.62)
4.0 (.28)
7.0 (.48) 16.5 (1.1)
9.0 (.62) 24.0 (1.7)
12.5 (.86) 34.0 (2.3)
4.0 (.28)
3.0 (.21)
7.0 (.48)
3.5 (.24)
5.0 (.35) 10.5 (.72)
6.5 (.45) 15.0 (1.0)
10.5 (.72) 27.5 (1.9)
4.0 (.28)
3.0 (.21)
7.0 (.48)
3.5 (.24)
5.0 (.35) 10.5 (.72)
6.5 (.45) 15.0 (1.0)
10.5 (.72) 27.5 (1.9)
SAE
NPTF
H204 C - 010 - HT
H204 C - 020 - HT
H604 C - 001 - HT
H604 C - 002 - HT
H604 C - 005 - HT
H604 C - 010 - HT
H604 C - 015 - HT
H704 C - 002 - HT
H704 C - 005 - HT
H704 C - 010 - HT
H704 C - 020 - HT
H704 C - 030 - HT
H754 C - 002 - HT
H754 C - 005 - HT
H754 C - 010 - HT
H754 C - 020 - HT
H754 C - 030 - HT
H754 C - 040 - HT
H754 C - 050 - HT
H804 C - 030 - HT
H804 C - 050 - HT
H804 C - 075 - HT
H804 C - 100 - HT
H804 C - 150 - HT
H854 C - 030 - HT
H854 C - 050 - HT
H854 C - 075 - HT
H854 C - 100 - HT
H854 C - 150 - HT
H205 C - 010 - HT
H205 C - 020 - HT
H605 C - 001 - HT
H605 C - 002 - HT
H605 C - 005 - HT
H605 C - 010 - HT
H605 C - 015 - HT
H705 C - 002 - HT
H705 C - 005 - HT
H705 C - 010 - HT
H705 C - 020 - HT
H705 C - 030 - HT
H755 C - 002 - HT
H755 C - 005 - HT
H755 C - 010 - HT
H755 C - 020 - HT
H755 C - 030 - HT
H755 C - 040 - HT
H755 C - 050 - HT
H805 C - 030 - HT
H805 C - 050 - HT
H805 C - 075 - HT
H805 C - 100 - HT
H805 C - 150 - HT
H855 C - 030 - HT
H855 C - 050 - HT
H855 C - 075 - HT
H855 C - 100 - HT
H855 C - 150 - HT
PRESSURE
RATING
3000 PSI
3000 PSI
2350 PSI
2350 PSI
2175 PSI
2175 PSI
(example) H 705 C - 030 - HT
NOTE: HT suffix represents standard high temperature configuration.
REDUCE DOWNTIME
FAX 800-245-3569 19
For A.P.I. Oil / Caustic and Corrosive Liquids
• Direct reading
Relatively
insensitive to
•
shock and vibration
Good
viscosity stability
•
• CRN: 0F14981.5
SPECIFICATIONS:
MATERIALS:
T316 Stainless body, piston and cone
COMMON PARTS:
Spring: T316 SS
Fasteners: T316 SS
®
THREADS: NPTF ANSI B2.2
TEMPERATURE RANGE: -20 to +240 °F (-29 to +116 °C) for higher temperatures consult factory
PRESSURE RATING:
Oil/Liquids Operating: See Ordering Information Table.
REPEATABILITY: ±1%
HOSTILE ENVIRONMENT OPTION SPECIFICATIONS:
MATERIALS:
COMMON PARTS:
Spring: T316 SS
Indicator: T416 SS
Fasteners: T316 SS
Bumper: T316 SS
®
Seals: Viton
Scale Support: T316 SS
End Caps: T316 SS
Guard: Cylindrical Pyrex® glass
®
Internal Magnet: Teflon Coated Alnico 8
DIMENSIONS:
A
B
NOMINAL LENGTH
PORT SIZE in (mm)
E
C
WIDTH
in (mm)
D
DEPTH
in (mm)
E
OFFSET
in (mm)
F
FLATS
in (mm)
¼
4.8 (122)
1.68 (43)
1.90 (48)
.84 (21)
.88 (22)
½
6.6 (168)
2.07 (53)
2.40 (61)
1.04 (26)
1.25 (32)
¾
7.2 (183)
2.48 (63)
2.85 (72)
1.24 (32)
1.50 (38)
1
7.2 (183)
2.48 (63)
2.85 (72)
1.24 (32)
1.75 (44)
1¼
12.2 (310) 4.12 (105) 4.72 (120) 2.06 (52)
2.75 (70)
1½
12.2 (310) 4.12 (105) 4.72 (120) 2.06 (52)
2.75 (70)
20 TEL. 800-433-5263
BEST-OF-CLASS ACCURACY
A
C
E
F
D
B
For A.P.I. Oil / Caustic and Corrosive Liquids
NOMINAL
PORT
SIZE
FLOW RANGE
GPM
PRESSURE DROP
100%
50%
FLOW
FLOW
PSI (BAR) PSI (BAR)
LPM
¼"
0.1 - 1.0 0.5 - 3.75 4.0 (.28) 9.0 (.62)
0.2 - 2.0 1 - 7.5 6.0 (.41) 13.0 (.90)
½"
0.2 - 2.0
0.5 - 5.0
1 - 10
1 - 15
1 - 7.5
2 - 19
5 - 38
4 - 56
2.0 (.14) 3.0 (.21)
3.0 (.21) 6.0 (.41)
4.0 (.28) 9.5 (.66)
6.5 (.45) 18.5 (1.3)
¾"
0.2 - 2.0
0.5 - 5.0
1 - 10
2 - 20
3 - 30
1 - 7.5
2 - 19
5 - 38
10 - 76
10 - 115
1.0 (.07) 2.0 (.14)
2.5 (.17) 3.5 (.24)
3.5 (.24) 9.0 (.62)
4.0 (.28) 9.0 (.62)
7.0 (.48) 16.5 (1.1)
1"
0.2 - 2.0
0.5 - 5.0
1 - 10
2 - 20
3 - 30
4 - 40
1 - 7.5
2 - 19
5 - 38
10 - 76
10 - 115
15 - 150
1.0 (.07) 2.0 (.14)
2.5 (.17) 3.5 (.24)
3.5 (.24) 9.0 (.62)
4.0 (.28) 9.0 (.62)
7.0 (.48) 16.5 (1.1)
9.0 (.62) 24.0 (1.7)
1¼"
3 - 30
5 - 50
10 - 75
10 - 100
10 - 110
20 - 190
40 - 280
50 - 380
3.0 (.21) 4.0 (.28)
3.5 (.24) 7.0 (.48)
5.0 (.35) 10.5 (.72)
6.5 (.45) 15.0 (1.0)
1½"
3 - 30
5 - 50
10 - 75
10 - 100
10 - 110
20 - 190
40 - 280
50 - 380
3.0 (.21) 4.0 (.28)
3.5 (.24) 7.0 (.48)
5.0 (.35) 10.5 (.72)
6.5 (.45) 15.0 (1.0)
API - OIL .876 (S.G.)
LIQUIDS 1.0 (S.G.)
NPTF
3000 PSI
H231C - 010 H231C - 020 3000 PSI
H631C - 002 H631C - 005 H631C - 010 H631C - 015 2500 PSI
H731C - 002 H731C - 005 H731C - 010 H731C - 020 H731C - 030 2500 PSI
H741C - 002 H741C - 005 H741C - 010 H741C - 020 H741C - 030 H741C - 040 2450 PSI
H831C - 030 H831C - 050 H831C - 075 H831C - 100 2450 PSI
H841C - 030 H841C - 050 H841C - 075 H841C - 100 -
NPTF
†
†
†
†
†
†
†
†
†
†
†
†
†
†
†
†
†
†
†
†
†
†
†
†
†
3000 PSI
H234C - 010 H234C - 020 3000 PSI
H634C - 002 H634C - 005 H634C - 010 H634C - 015 2500 PSI
H734C - 002 H734C - 005 H734C - 010 H734C - 020 H734C - 030 2500 PSI
H834C - 030 H834C - 050 H834C - 075 H834C - 100 2450 PSI
H844C - 030 H844C - 050 H844C - 075 H844C - 100 -
†
†
†
†
†
†
†
†
†
†
†
†
†
†
†
†
†
HOSTILE
ENVIRONMENT
OPTION
3000 PSI
HE
3000 PSI
HE
2350 PSI
HE
2350 PSI
HE
†
†
†
†
2175 PSI
†
†
†
†
2175 PSI
HE
HE
NOTE: Consult factory for availability.
(example) H731C - 030 - HE
PETROLEUM FLUIDS
PAGE 4
FLOW TRANSMITTERS
PAGE 16
PAGES 26
and 29
PAGE 30
ENHANCED RESOLUTION
FAX 800-245-3569 21
For Air / Caustic and Corrosive Gases
• Direct reading
Relatively
insensitive to
•
shock and vibration
Temperature
up to 240 °F
•
• CRN: 0F14981.5
SPECIFICATIONS:
MATERIALS:
COMMON PARTS:
Spring: T316 SS
Fasteners: T316 SS
Guard Seal/Bumper: Buna N
®
THREADS: NPTF ANSI B2.2
TEMPERATURE RANGE: -20 to +240 °F (-29 to +116 °C)
PRESSURE RATING:
Air / Gases Operating: 1,500 psi/103 bar max.
REPEATABILITY: ±1%
HOSTILE ENVIRONMENT OPTION SPECIFICATIONS:
MATERIALS:
COMMON PARTS:
Spring: T316 SS
Indicator: T416 SS
Fasteners: T316 SS
Bumper: T316 SS
®
Seals: Viton
Scale Support: T316 SS
End Caps: T316 SS
Guard: Cylindrical Pyrex® glass
®
Internal Magnet: Teflon Coated Alnico 8
DIMENSIONS:
A
B
NOMINAL LENGTH
PORT SIZE in (mm)
E
C
WIDTH
in (mm)
D
DEPTH
in (mm)
E
OFFSET
in (mm)
F
FLATS
in (mm)
¼
4.8 (122)
1.68 (43)
1.90 (48)
.84 (21)
.88 (22)
½
6.6 (168)
2.07 (53)
2.40 (61)
1.04 (26)
1.25 (32)
¾
7.2 (183)
2.48 (63)
2.85 (72)
1.24 (32)
1.50 (38)
1
7.2 (183)
2.48 (63)
2.85 (72)
1.24 (32)
1.75 (44)
1¼
12.2 (310) 4.12 (105) 4.72 (120) 2.06 (52)
2.75 (70)
1½
12.2 (310) 4.12 (105) 4.72 (120) 2.06 (52)
2.75 (70)
22 TEL. 800-433-5263
RUGGED CONSTRUCTION
A
C
E
F
D
B
NOMINAL
PORT
SIZE
FLOW RANGE


SCFM
L/SEC
2 - 20
3 - 30
1-9
1.5 - 14
3 - 25
5 - 50
10 - 100
15 - 150
3 - 25
5 - 50
10 - 100
15 - 150
25 - 250
3 - 25
5 - 50
10 - 100
15 - 150
25 - 250
PRESSURE DROP
100%
FLOW
PSI (BAR)
50%
FLOW
PSI (BAR)
MODEL NUMBER
(see example below)
GASES 1.0 (S.G.)
NPTF
HOSTILE
ENVIRONMENT
OPTION
10.15 ( 0.70) 18.71 (1.29)
13.75 (0.95) 26.23 (1.81)
H237C - 020 - †
H237C - 030 - †
2 - 12
3 - 22
5 - 47
7 - 70
1.5 - 11.5
2 - 23
5 - 47. 5
7 - 70
10 - 118
1.5 - 11.5
2 - 23
5 - 47.5
7 - 70
10 - 118
3.73 (0.26)
6.04 (0.42)
7.18 (0.50)
8.06 (0.56)
2.99 (0.21)
2.00 (0.14)
7.19 (0.50)
4.44 (0.31)
6.27 (0.43)
2.99 (0.21)
2.00 (0.14)
7.19 (0.50)
4.44 (0.31)
6.27(0.43)
6.10 (0.42)
10.35 (0.71)
13.85 (0.95)
18.49 (1.27)
5.90 (0.41)
3.58 (0.25)
12.87 (0.89)
9.52 (0.66)
15.38 (1.06)
5.90 (0.41)
3.58 (0.25)
12.87(0.89)
9.52 (0.66)
15.38 (1.06)
H637C
H637C
H637C
H637C
H737C
H737C
H737C
H737C
H737C
H747C
H747C
H747C
H747C
H747C
-
025
050
100
150
025
050
100
150
250
025
050
100
150
250
-
†
†
†
†
†
†
†
†
†
†
†
†
†
†
1¼"
20 - 200
40 - 400
60 - 600
80 - 800
10 - 95
20 - 180
30 - 280
50 - 350
1.89 (0.13) 3.16 (0.22)
2.53 (0.17) 5.49 (0.38)
4.47 (0.31) 10.71 (0.74)
6.13 (0.42) 17.14 (1.18)
H837C
H837C
H837C
H837C
-
200
400
600
800
-
†
†
†
†
HE
1½"
20 - 200
40 - 400
60 - 600
80 - 800
10 - 95
20 - 180
30 - 280
50 - 350
1.89 (0.13) 3.16 (0.22)
2.53 (0.17) 5.49 (0.38)
4.47 (0.31) 10.71 (0.74)
6.13 (0.42) 17.14 (1.18)
H847C
H847C
H847C
H847C
-
200
400
600
800
-
†
†
†
†
HE
¼"
½"
¾"
1"
HE
HE
HE
HE
(example) H 737C - 250 - HE
NOTE: Consult factory for availability.
 SCFM/PSI multipressure scales are standard.
 L/sec/bar multipressure scales are available at no
extra charge. Consult factory for other options.
NOTE: When ordering a L/sec/bar
scale add “S1” suffix to part number
(example) H737 X - 250 - S1
or
H737 X - 250 - HE - S1
BRIGHT EASY-TO-READ SCALES
FAX 800-245-3569 23
For Air and Other Compressed Gases
• Direct reading
Relatively
insensitive to
•
shock and vibration
Temperature
up to 240 °F
•
• CRN: 0F14981.5
SPECIFICATIONS:
MATERIALS:
COMMON PARTS:
Spring: T302 SS
Fasteners: T303 SS
®
TEMPERATURE RANGE: -20 to +240 °F (-29 to +116 °C)
PRESSURE RATING:
Stainless Steel Operating: 1,500 psi/103 bar max.
REPEATABILITY: ±1%
B
A
F D
E
E
C
DIMENSIONS:
A
B
NOMINAL LENGTH
PORT SIZE in (mm)
B1
LENGTH
in (mm)
C
WIDTH
in (mm)
D
E
DEPTH OFFSET
in (mm) in (mm)
F
FLATS
in (mm)
G
HEIGHT
in (mm)
¼ (SAE 6)
4.8 (122) 6.12 (155) 1.68 (43)
1.90 (48)
.84 (21)
.88 (22)
5.0 (127)
½ (SAE 10)
6.6 (168) 8.00 (203) 2.07 (53)
2.40 (61) 1.04 (26)
1.25 (32)
5.4 (137)
¾ (SAE 12)
7.2 (183)
8.9 (226)
2.48 (63)
2.85 (72) 1.24 (32)
1.50 (38)
5.9 (150)
1 (SAE 16)
7.2 (183)
8.9 (226)
2.48 (63)
2.85 (72) 1.24 (32)
1.75 (44)
5.9 (150)
1¼ (SAE 20) 12.2 (310) 13.8 (351) 4.12 (105) 4.72 (120) 2.06 (52)
2.75 (70)
7.2 (183)
1½ (SAE 24) 12.2 (310) 13.8 (351) 4.12 (105) 4.72 (120) 2.06 (52)
2.75 (70)
7.2 (183)
24 TEL. 800-433-5263
IMPROVE EFFICIENCY
For Air and Other Compressed Gases
FLOW RANGE
NOMINAL


PORT
L/SEC
SIZE SCFM
¼"
SAE 6
½"
SAE 10
¾"
SAE 12
1"
SAE 16
1¼"
SAE 20
1½"
SAE 24
PRESSURE DROP
50%
FLOW
PSI (BAR)
100%
FLOW
PSI (BAR)
SAE
0.2 - 2.2 2.51 (0.17) 4.45 (0.31) H270 C - 005 - †
0.5 - 5
1 - 10 0.5 - 4.75 9.29 (0.64) 16.46(1.13) H270 C - 010 - †
1-9
2 - 20
10.15 (0.70) 18.71 (1.29) H270 C - 020 - †
1.5 - 14 13.75 (0.95) 26.23 (1.81) H270 C - 030 - †
3 - 30
3.73 (0.26) 6.10 (0.42) H670 C - 025 - †
2 - 12
3 - 25
6.04 (0.42) 10.35 (0.71) H670 C - 050 - †
3 - 22
5 - 50
7.18 (0.50) 13.85 (0.95) H670 C - 100 - †
5 - 47
10 - 100
8.06 (0.56) 18.49 (1.27) H670 C - 150 - †
7 - 70
15 - 150
3 - 25 1.5 - 11.5 2.99 (0.21) 5.90 (0.41) H770 C - 025 - †
2.00 (0.14) 3.58 (0.25) H770 C - 050 - †
2 - 23
5 - 50
10 - 100 5 - 47.5 7.19 (0.50) 12.87 (0.89) H770 C - 100 - †
4.44 (0.31) 9.52 (0.66) H770 C - 150 - †
7 - 70
15 - 150
25 - 250 10 - 118 6.27 (0.43) 15.38 (1.06) H770 C - 250 - †
3 - 25 1.5 - 11.5 2.99 (0.21) 5.90 (0.41) H790 C - 025 - †
2.00 (0.14) 3.58 (0.25) H790 C - 050 - †
2 - 23
5 - 50
10 - 100 5 - 47.5 7.19 (0.50) 12.87 (0.89) H790 C - 100 - †
4.44 (0.31) 9.52 (0.66) H790 C - 150 - †
7 - 70
15 - 150
25 - 250 10 - 118 6.27 (0.43) 15.38 (1.06) H790 C - 250 - †
20 - 200 10 - 95
1.89 (0.13) 3.16 (0.22) H870 C - 200 - †
40 - 400 20 - 180 2.53 (0.17) 5.49 (0.38) H870 C - 400 - †
60 - 600 30 - 280 4.47 (0.31) 10.71 (0.74) H870 C - 600 - †
80 - 800 50 - 350 6.13 (0.42) 17.14 (1.18) H870 C - 800 - †
100 - 1000 50 - 475 9.84 (0.68) 28.45 (1.96) H870 C - 999 - †
20 - 200 10 - 95
1.89 (0.13) 3.16 (0.22) H890 C - 200 - †
40 - 400 20 - 180 2.53 (0.17) 5.49 (0.38) H890 C - 400 - †
60 - 600 30 - 280 4.47 (0.31) 10.71 (0.74) H890 C - 600 - †
80 - 800 50 - 350 6.13 (0.42) 17.14 (1.18) H890 C - 800 - †
100 - 1000 50 - 475 9.84 (0.68) 28.45 (1.96) H890 C - 999 - †
NOTE: Consult factory for other options.
 Fractional sizes apply to NPTF.
 SCFM/PSI multipressure scales are standard.
 L/sec/bar multipressure
scales are available at no extra charge.
NPTF
H271 C - 005 - †
H271 C - 010 - †
H271 C - 020 - †
H271 C - 030 - †
H671 C - 025 - †
H671 C - 050 - †
H671 C - 100 - †
H671 C - 150 - †
H771 C - 025 - †
H771 C - 050 - †
H771 C - 100 - †
H771 C - 150 - †
H771 C - 250 - †
H791 C - 025 - †
H791 C - 050 - †
H791 C - 100 - †
H791 C - 150 - †
H791 C - 250 - †
H871 C - 200 - †
H871 C - 400 - †
H871 C - 600 - †
H871 C - 800 - †
H871 C - 999 - †
H891 C - 200 - †
H891 C - 400 - †
H891 C - 600 - †
H891 C - 800 - †
H891 C - 999 - †
(example) H 771 C - 030
NOTE: When ordering a L/sec/bar
scale add “S1” suffix to part number
(example) H771 A - 250 - S1
AIR & CORROSIVE GASES
FLOW TRANSMITTERS
PAGE 22
PAGES 26
and 29
PAGE 30
REDUCE DOWNTIME
FAX 800-245-3569 25
Canadian Registration Flow-Alert™ Flow Switches (Micro Switch)
For Liquids / Air and Other Compressed Gases
•
•
•
•
•
•
•
•
•
•
•
Automatically signals alarm
if flow is too high or too low
Automatically opens or
closes electrical circuits
Triggers warning lights,
buzzers and other devices
Shuts down pumps and/or
other equipment to protect
your operation against
permanent damage
Available from ¼" to 1½"
sizes in aluminum, brass
and stainless
Installs in any position
Easier-to-read linear scale
No flow straighteners or
special piping requirements
Relatively insensitive to
shock and vibration
Special scales available
CRN: 0F14981.5
SPECIFICATIONS:
MATERIALS:
(Oil, PE, WBF, & Air Meters)
T316 Stainless body, C360 Brass piston and cone (Water meters)
PETROLEUM (Oil) COMMON PARTS:
Spider Plate: T316 SS Retaining Ring: SAE 1070/1090 Carbon Steel
Spring: T302 SS
Fasteners: T303 SS
Pressure Seals: Viton® Enclosure Seal: Silicone gasket
Lens: Polycarbonate
PHOSPHATE ESTER (PE) COMMON PARTS:
Spring: T302 SS
Fasteners: T303 SS
Pressure Seals: EPR
Enclosure Seal: Silicone gasket
Lens: Polycarbonate
WATER-BASED (WBF), WATER, AIR COMMON PARTS:
Spider Plate: T316 SS Retaining Ring: T316 SS
Spring: T302 SS
Fasteners: T303 SS
Lens: Polycarbonate
API OIL / AIR / CAUSTIC and CORROSIVE LIQUIDS and GASES:
Spring: T316 SS
Fasteners: T316 SS
Lens: Polycarbonate
TEMPERATURE RANGE: -20 to +240 °F (-29 to +116 °C )
PRESSURE RATING:
See Ordering Information Tables pages 33-39.
REPEATABILITY: ±1%
PRESSURE DROP REFERENCE TABLE:
FLUID TYPE
50% / 100%
Pressure Drop
Oil
PE
WBF
Water
API Oil
p. 5
p. 9
p. 13
p. 17
p. 21
Pressure Drop
Charts
p. 21
See Hedland full-line catalog
26 TEL. 800-433-5263
Caustic
Air/Caustic
& Corrosive & Corrosive
Liquids
Gases
SIMPLE TO USE
p. 23
Air
p. 25
Canadian Registration Flow-Alert™ Flow Switches (Micro Switch)
DIMENSIONS:
A
B
C
D
E
F
G
H
I
NOMINAL
PORT SIZE
LENGTH
in (mm)
LENGTH
in (mm)
LENGTH
in (mm)
WIDTH
in (mm)
WIDTH
in (mm)
WIDTH
in (mm)
WIDTH
in (mm)
DEPTH
in (mm)
J
K
¼ (SAE 6)
6.6 (168) 5.27 (134) 6.41 (163) 6.00 (152) 3.23 (82)
3.00 (76) 4.20 (107) 2.94 (75) 1.51 (38)
.31 (8)
½ (SAE 10)
6.6 (168) 5.27 (134) 6.41 (163) 6.00 (152) 3.23 (82)
3.00 (76) 4.20 (107) 2.94 (75) 1.51 (38)
.31 (8)
¾ (SAE 12)
7.2 (183) 5.27 (134) 7.04 (179) 6.00 (152) 3.60 (91)
3.00 (76) 4.20 (107) 2.94 (75) 1.27 (32)
.31 (8)
1 (SAE 16)
7.2 (183) 5.27 (134) 7.04 (179) 6.00 (152) 3.60 (91)
3.00 (76) 4.20 (107) 2.94 (75) 1.27 (32)
.31 (8)
1¼ (SAE 20) 12.2 (310) 10.68 (271) 11.65 (296) 7.63 (194) 4.84 (123) 3.82 (97) 5.02 (128) 4.50 (114) 2.20 (56)
.31 (8)
1½ (SAE 24) 12.2 (310) 10.68 (271) 11.65 (296) 7.63 (194) 4.84 (123) 3.82 (97) 5.02 (128) 4.50 (114) 2.20 (56)
.31 (8)
OFFSET HOLE DIA.
in (mm) in (mm)
ENCLOSURE:
Material: Anodized and epoxy powder-coated aluminum with polycarbonate lens.
Seals: Silicone gasket between enclosure and lens.
Viton® O-rings between enclosure and flow meter body.
Connection: Pig-tail conductor (standard) with water-tight strain relief.
Other connections, including quick-disconnect, are available – consult factory for details.
Fastener: T303 SS
Rating: NEMA 12 & 13 (IP65)
ELECTRICAL CIRCUITRY:
Adjustable Flow-Alert™ signal: single (1) or double (2) switch, pre-wired single-pole, double-throw (SPDT)
UL recognized and CSA certified with high or low flow limit setting, adjustable over the entire flow
measuring range. Other switches are available – consult factory for details.
10A @ 250 VAC maximum, 0.5A @ 125 VDC maximum.
All Flow-Alert sizes (¼ to 1½ inch series) are offered in single (1) switch or double (2) switch models.
The single switch model is supplied with a 34" length of 4-wire #18 AWG jacketed cable.
The double switch model is supplied with an 18" length of 7-wire #16 AWG jacketed cable.
Optional 8 ft. cables are available – consult factory for details.
Two (2) Switch 7-wire cable
Switch #1
Red: Normally Closed (NC)
Black: Normally Open (NO)
White: Common (COM)
One (1) Switch 4-wire cable
Red: Normally Closed (NC)
Black: Normally Open (NO)
White: Common (COM)
Green: Ground
Switch #2
Orange: Normally Closed (NC)
Blue: Normally Open (NO)
White/Black: Common (COM)
Green: Ground
FLOW-ALERT OIL
FLOW-ALERT PE
FLOW-ALERT WBF
FLOW-ALERT WATER
Ordering Info 33
Ordering Info 34
Ordering Info 35
Ordering Info 36
FLOW-ALERT API OIL and
Caustic and Corrosive Liquids
FLOW-ALERT AIR and
Caustic and Corrosive Gases
FLOW-ALERT AIR
Ordering Info 37
Ordering Info 38
Ordering Info 39
RELIABLE FLOW MEASUREMENT
FAX 800-245-3569 27
Canadian Registration Flow-Alert™ Flow Switches (Reed Switch)
•
•
•
•
•
•
•
•
•
No mechanical linkage
Automatically signals alarm
if flow is too high or too low
Available from ¼" to
1½" sizes in aluminum, brass
and stainless
Installs in any position
Easier-to-read linear scale
No flow straighteners or
special piping requirements
Relatively insensitive to
shock and vibration
Special scales available
CRN: 0F14981.5
SPECIFICATIONS:
MATERIALS:
(Oil, PE, WBF, & Air meters)
Spring: T302 SS
Fasteners: T303 SS
Indicator: T400 Series Stainless
Pressure Seals: Viton® Internal Magnet: Teflon® Coated Alnico 8
Lens: Polycarbonate
Switch Carrier: Aluminum
Spring: T302 SS
Fasteners: T303 SS
Pressure Seals: EPR
Lens: Polycarbonate
Spring: T302 SS
Fasteners: T303 SS
Lens: Polycarbonate
Spring: T316 SS
Fasteners: T316 SS
Lens: Polycarbonate
PRESSURE RATING:
REPEATABILITY: ±1%
FLUID TYPE
50% / 100%
Pressure Drop
Pressure Drop
Charts
Oil
PE
WBF
Water
API Oil
p. 5
p. 9
p. 13
p. 17
p. 21
Caustic
Air/Caustic
Liquids
Gases
p. 21
Teflon is a registered trademark of E.I. du Pont de Nemours and Co.
28 TEL. 800-433-5263
FULLY STAFFED TECHNICAL SERVICES DEPARTMENT
p. 23
Air
p. 25
Canadian Registration Flow-Alert™ Flow Switches (Reed Switch)
DIMENSIONS:
A
B
C
D
E
F
G
H
I
NOMINAL
PORT SIZE
LENGTH
in (mm)
LENGTH
in (mm)
LENGTH
in (mm)
WIDTH
in (mm)
WIDTH
in (mm)
WIDTH
in (mm)
WIDTH
in (mm)
DEPTH
in (mm)
¼ (SAE 6)
6.6 (168) 5.27 (134) 6.41 (163) 6.00 (152) 3.23 (82)
3.00 (76) 4.20 (107) 2.94 (75) 1.51 (38)
.31 (8)
½ (SAE 10)
6.6 (168) 5.27 (134) 6.41 (163) 6.00 (152) 3.23 (82)
3.00 (76) 4.20 (107) 2.94 (75) 1.51 (38)
.31 (8)
¾ (SAE 12)
7.2 (183) 5.27 (134) 7.04 (179) 6.00 (152) 3.60 (91)
3.00 (76) 4.20 (107) 2.94 (75) 1.27 (32)
.31 (8)
1 (SAE 16)
7.2 (183) 5.27 (134) 7.04 (179) 6.00 (152) 3.60 (91)
3.00 (76) 4.20 (107) 2.94 (75) 1.27 (32)
.31 (8)
1¼ (SAE 20)
12.2 (310) 10.68 (271) 11.65 (296) 7.63 (194) 4.84 (123) 3.82 (97) 5.02 (128) 4.50 (114) 2.20 (56)
.31 (8)
1½ (SAE 24)
12.2 (310) 10.68 (271) 11.65 (296) 7.63 (194) 4.84 (123) 3.82 (97) 5.02 (128) 4.50 (114) 2.20 (56)
.31 (8)
DIMENSIONS:
J
E
A
B
C
D
E
F
NOMINAL
PORT SIZE
LENGTH
in (mm)
WIDTH
in (mm)
DEPTH
in (mm)
OFFSET
in (mm)
FLATS
in (mm)
¼ (SAE 6)
4.8 (122)
1.68 (43)
1.90 (48)
.84 (21)
.88 (22)
K
OFFSET HOLE DIA.
in (mm) in (mm)
A
C
E
F
D
B
ENCLOSURE:
Material: Anodized and epoxy powder-coated aluminum with polycarbonate lens.
Seals: Silicone gasket between enclosure and lens.
Viton® O-rings between enclosure and flow meter body.
Connection: 4-pin (Protection Class IP65)
Fastener: T303 SS
Rating: NEMA 12 & 13 (IP65)
2
3
ELECTRICAL SPECIFICATIONS:
Adjustable Flow-Alert™ signal: single (1) or double (2) reed switch, pre-wired singlepole, single-throw (SPST-NO) normally open; or single-pole, single-throw (SPST-NC)
normally closed. UL recognized and CSA certified with high or low flow limit setting,
adjustable over the entire flow measuring range.
1
SPST-NO
10 Watts Max
50 VDC Max
0.500 A Max
SPST-NC
5 Watts Max
50 VDC Max
0.500 A Max
Operating Current: DC
Amps
Electrical Circuitry:
The flow switch is supplied
with 15 feet of shielded,
4-wire #22 AWG PVC
jacketed cable, color coded
as follows: 1 Red, 2 Black
for single (1) Reed Switch,
and 3 Green, 4 White for
double (2) Reed Switch.
Contact Form
ELECTRICAL SPECIFICATIONS
Contact Rating
Voltage, Switching
Current (resistive), Switching
OPERATING SPECIFICATIONS
Contact Resistance, Initial
Operating Temperature
0.5
0.4
0.3
0.2
0.1
0
0
4
8
16
20
24
28
32
36
40
44
48
44
48
SAFE OPERATING AREA – SPST-NC
0.6
0.100 Ω Max
0.100 Ω Max
20 to +240 °F -20 to +240 °F
(-20 to +116 °C) (-20 to +116 °C)
12
Operating Voltage: DC Volts
Operating Current: DC
Amps
4
SAFE OPERATING AREA – SPST-NO
0.6
0.5
0.4
0.3
0.2
0.1
0
0
4
8
12
16
20
24
28
32
36
40
Operating Voltage: DC Volts
FLOW-ALERT OIL
FLOW-ALERT PE
FLOW-ALERT WBF
FLOW-ALERT WATER
Ordering Info 33
Ordering Info 34
Ordering Info 35
Ordering Info 36
FLOW-ALERT API OIL and
FLOW-ALERT AIR and
FLOW-ALERT AIR
Ordering Info 37
Ordering Info 38
Ordering Info 39
FAX 800-245-3569 29
Canadian Registration MR Flow Transmitters
•
Full line of multi-functional
remote flow indicators and
transmitters
• Operate as part of a totally
integrated electronic process
control/data acquisition system
• Non-contact sensor electronics
• Electronic signal
conditioning circuit
• Digital flow rate and total
flow indication
• Proportional analog output
• In-field compensation forSpecific gravity of all fluids
Viscosity of petroleumbased fluids Specific gravity,
pressure,and temperature
of pneumatic systems
• CE compliant- exceeds
US and meets European
standards for EMI/EMC
• US Patent 7,130,750
• CRN: 0F14981.5
SPECIFICATIONS:
MATERIALS:
(Oil, PE, WBF, & Air meters)
Spring: T302 SS
Fasteners: T303 SS
Internal Magnet: Teflon ® Coated Alnico 8
Lens: Polycarbonate
Spring: T302 SS
Fasteners: T303 SS
Pressure Seals: EPR
Lens: Polycarbonate
Spring: T302 SS
Fasteners: T303 SS
®
Pressure Seals: Viton Enclosure Seal: Silicone gasket
Lens: Polycarbonate
Spring: T316 SS
Fasteners: T316 SS
Lens: Polycarbonate
PRESSURE RATING:
REPEATABILITY: ±1%
FLUID TYPE
50% / 100%
Pressure Drop
Pressure Drop
Charts
Oil
PE
WBF
Water
API Oil
p. 5
p. 9
p. 13
p. 17
p. 21
p. 21
30 TEL. 800-433-5263
Caustic
Air/Caustic
Liquids
Gases
GOOD VISCOSITY STABILITY
p. 23
Air
p. 25
ENCLOSURE:
Material:
Anodized and epoxy powder-coated aluminum with
polycarbonate lens
Seals:
Silicone gaskets between enclosure and lens
Viton® O-rings between enclosure and flow
meter body
Connection:
4-pin (Protection Class IP65) standard, see Figure 2
Other connections available - consult factory for details
Fasteners:
T303 SS
Rating:
NEMA 12 & 13 (IP 52/54)
ELECTRICAL SPECIFICATIONS:
Power
Requirement: 0-5 VDC Output: 10-30 VDC @ 0.75W maximum
0-10 VDC Output: 12-30 VDC @ 0.75W maximum
4-20 mA Output: loop-powered, 30 VDC maximum
Power
Consumption: 25 mA maximum
Analog
Outputs:
0-5 VDC and 0-10 VDC into 10,000 Ohms minimum
4-20 mA into 1000 Ohms maximum, see Figure 1
Circuit
Protection:
Reverse polarity and current limiting
Transmission
Distance:
Isolation:
Display:
Temperature
Drift:
SCHEMATICS:
The transmitter can be wired in various configurations to allow
interface with many different types of data collection and
control instrumentation.
Schematics 1 & 2 represent typical wiring for a target powered
by either AC power or DC supply. Schematics 3 & 4 will be
utilized when the flow transmitter is operated with loop-powered
process indicators or data loggers that do not have external
sensor excitation available.
Black
External DC Sensor
Excitation
Green
4-20 mA Input
Red
White
Example: Chart Recorder
Schematic 1: 4-20 mA connection using target
power supply
Black
Sensor Excitation
0-5 VDC Input
Green
0-10 VDC Input
Red
Ground
White
4-20 mA limited by cable resistance
0-5 VDC and 0-10 VDC 1000 feet (300 m) maximum
Inherently isolated from the piping system
Schematic 2: 0-5 Vdc or 0-10 Vdc connection using
target power supply
Fixed or toggle modes of operation for rate and
totalizer display
8 digit, 0.70" high numeric display for rate and total
8 digit, 0.35" high alphanumeric display for units
and setup
Black
50 ppm / °C (max)
White
Fuse: 0.05 A Fast
Excitation
Voltage
Green
4-20 mA Input (+)
4-20 mA Input (-)
Red
Analog Output: Resolution - 1:4000
Transient
Over-Voltages: Category 3, in accordance with IEC 664
Category 2, in accordance with IEC 664
Approvals:
CE compliant
LOOP RESISTANCE OHMS
Pollution
Degree:
Schematic 3: 4-20 mA connection using target
external power supply
Fuse: 0.05 A Fast
Black
0-5 VDC Input
Green
0-10 VDC Input
Red
1000
Ground
White
Note: Shaded area
represents acceptable
DC supply for loop loads.
800
600
400
250 loop requires
a DC supply between
12 and 28 VDC
200
0
DC SUPPLY VOLTS
Figure 1. Load Limitations (4-20 mA Output Only)
Excitation Voltage
Schematic 4: 0-5 Vdc or 0-10 Vdc connection using
target external power supply
DC Output Connection
Loop Power Connection
2 Black:
No Connection
(-) 4-20 mA Out
3 Green:
1 Red:
0 VDC
No Connection
(+) DC Power
(+) 4-20 mA In
4 White:
0-5 VDC or 0-10 VDC Output
No Connection
Figure 2. Electrical 4-Pin Connection
ACCURATE OVER A WIDE VISCOSITY RANGE
FAX 800-245-3569 31
Dimensions:
A
B
C
D
E
F
G
H
I
J
K
NOMINAL
PORT SIZE
LENGTH
in (mm)
LENGTH
in (mm)
LENGTH
in (mm)
WIDTH
in (mm)
WIDTH
in (mm)
WIDTH
in (mm)
WIDTH
in (mm)
DEPTH
in (mm)
OFFSET
in (mm)
HOLE DIA.
in (mm)
¼ (SAE 6)
6.60 (168)
5.27 (134)
6.41 (163)
6.00 (152)
3.23 (82)
3.00 (76)
4.20 (107)
2.94 (75)
1.51 (38)
.31 (8)
½ (SAE 10)
6.60 (168)
5.27 (134)
6.41 (163)
6.00 (152)
3.23 (82)
3.00 (76)
4.20 (107)
2.94 (75)
1.51 (38)
.31 (8)
¾ (SAE 12)
7.20 (183)
5.27 (134)
7.04 (179)
6.00 (152)
3.60 (91)
3.00 (76)
4.20 (107)
2.94 (75)
1.27 (32)
.31 (8)
1 (SAE 16)
7.20 (183)
5.27 (134)
7.04 (179)
6.00 (152)
3.60 (91)
3.00 (76)
4.20 (107)
2.94 (75)
1.27 (32)
.31 (8)
1¼ (SAE 20)
12.20 (310)
10.68 (271)
11.65 (296)
7.63 (194)
4.84 (123)
3.82 (97)
5.02 (128)
4.50 (114)
2.20 (56)
.31 (8)
1½ (SAE 24)
12.20 (310)
10.68 (271)
11.65 (296)
7.63 (194)
4.84 (123)
3.82 (97)
5.02 (128)
4.50 (114)
2.20 (56)
.31 (8)
FLOW TRANSMITTER OIL
Ordering Info
FLOW TRANSMITTER PE
33
Ordering Info
FLOW TRANSMITTER API OIL and
Ordering Info
32 TEL. 800-433-5263
37
34
FLOW TRANSMITTER WBF
Ordering Info
35
FLOW TRANSMITTER AIR and
Ordering Info
38
FLOW TRANSMITTER WATER
Ordering Info
FLOW TRANSMITTER AIR
Ordering Info
39
36
Canadian Registration Flow-Alert™ Flow Switches and Flow Transmitters
NOMINAL
PORT
SIZE
¼"
SAE 6
¼"
SAE 6
½"
SAE 10
¾"
SAE 12
1"
SAE 16
1¼"
SAE 20
1½"
SAE 24
FLOW RANGE
GPM
LPM
.02 - 0.2 0.1 - 0.75
.05 - 0.5 0.2 - 1.9
0.1 - 1.0 0.5 - 3.75
0.2 - 2.0 1.0 - 7.5
0.1 - 1.0 0.5 - 3.75
0.2 - 2.0 1 - 7.5
2 - 19
0.5 - 5.0
5 - 38
1 - 10
4 - 56
1 - 15
0.2 - 2.0 1 - 7.5
2 - 19
0.5 - 5.0
5 - 38
1 - 10
10 - 76
2 - 20
10 - 115
3 - 30
0.2 - 2.0 1 - 7.5
2 - 19
0.5 - 5.0
5 - 38
1 - 10
10 - 76
2 - 20
10 - 115
3 - 30
15 - 150
4 - 40
20 - 190
5 - 50
10 - 110
3 - 30
20 - 190
5 - 50
10 - 75 40 - 280
10 - 100 50 - 380
10 - 150 50 - 560
10 - 110
3 - 30
20 - 190
5 - 50
10 - 75 40 - 280
10 - 100 50 - 380
10 - 150 50 - 560
SAE
NPTF
H200 C - 002 - †
H200 C - 005 - †
H200 C - 010 - †
H200 C - 020 - †
H600 C - 001 - †
H600 C - 002 - †
H600 C - 005 - †
H600 C - 010 - †
H600 C - 015 - †
H700 C - 002 - †
H700 C - 005 - †
H700 C - 010 - †
H700 C - 020 - †
H700 C - 030 - †
H760 C - 002 - †
H760 C - 005 - †
H760 C - 010 - †
H760 C - 020 - †
H760 C - 030 - †
H760 C - 040 - †
H760 C - 050 - †
H800 C - 030 - †
H800 C - 050 - †
H800 C - 075 - †
H800 C - 100 - †
H800 C - 150 - †
H860 C - 030 - †
H860 C - 050 - †
H860 C - 075 - †
H860 C - 100 - †
H860 C - 150 - †
H201 C - 002 - †
H201 C - 005 - †
H201 C - 010 - †
H201 C - 020 - †
H601 C - 001 - †
H601 C - 002 - †
H601 C - 005 - †
H601 C - 010 - †
H601 C - 015 - †
H701 C - 002 - †
H701 C - 005 - †
H701 C - 010 - †
H701 C - 020 - †
H701 C - 030 - †
H761 C - 002 - †
H761 C - 005 - †
H761 C - 010 - †
H761 C - 020 - †
H761 C - 030 - †
H761 C - 040 - †
H761 C - 050 - †
H801 C - 030 - †
H801 C - 050 - †
H801 C - 075 - †
H801 C - 100 - †
H801 C - 150 - †
H861 C - 030 - †
H861 C - 050 - †
H861 C - 075 - †
H861 C - 100 - †
H861 C - 150 - †
PRESSURE
RATING
OPTIONS
Flow-Alert
1 SWITCH /
2 SWITCH
5000 PSI
3000 PSI
Not Available
3000 PSI
F1/F2
F1/F2
2500 PSI
F1/F2
2500 PSI
F1/F2
2450 PSI
F1/F2
2450 PSI
F1/F2
Flow-Alert
MULTIPLE
REED SWITCH OUTPUT SENSOR
Not Available
S
E
E
O
P
T
I
O
N
S
B
E
L
O
W
MR
MR
MR
MR
MR
MR
(example) H 701 C - 030 - F1
or
Flow-Alert Flow
Switches
F1 = Single Switch
F2 = Double Switch
F2
(example) H 701 A - 030 - RS1NO
Flow-Alert Reed Switches
Options:
RS1NO (reed switch one (1) normally open)
RS2NO (reed switch two (2) normally open)
RS1NC (reed switch one (1) normally closed)
RS2NC (reed switch two (2) normally closed)
(example) H 701 A - 030 - MR
NOTE: ¼" liquid meters for .02-0.2 and .05-0.5 GPM ranges
Multiple Output Flow Sensor
available in strap-on design for RS1NO and RS1NC only.
3 Standard field selectable outputs
0-5 VDC
Flow Transmitter is factory-calibrated to provide 4 mA (0 VDC) at zero flow
0-10 VDC and 20 mA (5/10 VDC) at full flow. Optional 5-point calibration certificate available
4-20 mA
(see Price and Availability Digest for details).
}
NOTE: For 50% and 100% flow/pressure drop information, see page 5.
For detailed flow/pressure drop charts, see Hedland full-line catalog.
TRACEABLE TO NIST STANDARDS
FAX 800-245-3569 33
NOMINAL
PORT
SIZE
FLOW RANGE
GPM
LPM
SAE
.02 - 0.2 0.1 - 0.75 H294 C - 002 - †
.05 - 0.5 0.2 - 1.9 H294 C - 005 - †
0.1 - 1.0 0.5 - 3.75 H294 C - 010 - †
0.2 - 2.0 1.0 - 7.5 H294 C - 020 - †
0.1 - 1.0 0.5 - 3.75 H694 C - 001 - †
0.2 - 2.0 1 - 7.5
H694 C - 002 - †
½"
0.5 - 5.0 2 - 19
H694 C - 005 - †
SAE 10
5 - 38
1 - 10
H694 C - 010 - †
4 - 56
1 - 15
H694 C - 015 - †
0.2 - 2.0 1 - 7.5
H794 C - 002 - †
0.5 - 5.0 2 - 19
H794 C - 005 - †
¾"
5 - 38
1 - 10
H794 C - 010 - †
SAE 12
10 - 76
2 - 20
H794 C - 020 - †
3 - 30 10 - 115 H794 C - 030 - †
0.2 - 2.0 1 - 7.5
H764 C - 002 - †
0.5 - 5.0 2 - 19
H764 C - 005 - †
5 - 38
1 - 10
H764 C - 010 - †
1"
10 - 76
2 - 20
H764 C - 020 - †
SAE 16
3 - 30 10 - 115 H764 C - 030 - †
4 - 40 15 - 150 H764 C - 040 - †
5 - 50 20 - 190 H764 C - 050 - †
3 - 30 10 - 110 H894 C - 030 - †
5 - 50 20 - 190 H894 C - 050 - †
1¼"
10 - 75 40 - 280 H894 C - 075 - †
SAE 20
10 - 100 50 - 380 H894 C - 100 - †
10 - 150 50 - 560 H894 C - 150 - †
3 - 30 10 - 110 H864 C - 030 - †
5 - 50 20 - 190 H864 C - 050 - †
1½"
10 - 75 40 - 280 H864 C - 075 - †
SAE 24
10 - 100 50 - 380 H864 C - 100 - †
10 - 150 50 - 560 H864 C - 150 - †
 Fractional sizes apply to NPTF.
¼"
SAE 6
¼"
SAE 6
(example) H 795 C - 030 - F1
or
PRESSURE
RATING
NPTF
H295 C - 002 - †
H295 C - 005 - †
H295 C - 010 - †
H295 C - 020 - †
H695 C - 001 - †
H695 C - 002 - †
H695 C - 005 - †
H695 C - 010 - †
H695 C - 015 - †
H795 C - 002 - †
H795 C - 005 - †
H795 C - 010 - †
H795 C - 020 - †
H795 C - 030 - †
H765 C - 002 - †
H765 C - 005 - †
H765 C - 010 - †
H765 C - 020 - †
H765 C - 030 - †
H765 C - 040 - †
H765 C - 050 - †
H895 C - 030 - †
H895 C - 050 - †
H895 C - 075 - †
H895 C - 100 - †
H895 C - 150 - †
H865 C - 030 - †
H865 C - 050 - †
H865 C - 075 - †
H865 C - 100 - †
H865 C - 150 - †
OPTIONS
Flow-Alert
1 SWITCH /
2 SWITCH
5000 PSI
3000 PSI
Not Available
3000 PSI
F1/F2
F1/F2
2500 PSI
F1/F2
2500 PSI
F1/F2
2450 PSI
F1/F2
2450 PSI
F1/F2
Flow-Alert
MULTIPLE
Not Available
S
E
E
O
P
T
I
O
N
S
B
E
L
O
W
MR
MR
MR
MR
MR
MR
F2
(example) H 701 C - 030 - RS1NO
F1 = Single Switch
F2 = Double Switch
Options:
(example) H 795 C - 030 - MR
NOTE: ¼" liquid meters for .02-0.2 and .05-0.5 GPM ranges available in
strap-on design for RS1NO and RS1NC only.
0-5 VDC
0-10 VDC
and 20 mA (5/10 VDC) at full flow. Optional 5-point calibration certificate available
4-20 mA
}
34 TEL. 800-433-5263
IMPROVE EFFICIENCY
NOMINAL
PORT
SIZE
FLOW RANGE
GPM
LPM
SAE
NPTF
.02 - 0.2 0.1 - 0.75 H212 C - 002 - †
.05 - 0.5 0.2 - 1.9 H212 C - 005 - †
0.1 - 1.0 0.5 - 3.75 H212 C - 010 - †
0.2 - 2.0 1.0 - 7.5 H212 C - 020 - †
0.1 - 1.0 0.5 - 3.75 H612 C - 001 - †
0.2 - 2.0 1 - 7.5 H612 C - 002 - †
½"
0.5 - 5.0 2 - 19 H612 C - 005 - †
SAE 10
5 - 38 H612 C - 010 - †
1 - 10
4 - 56 H612 C - 015 - †
1 - 15
0.2 - 2.0 1 - 7.5 H712 C - 002 - †
0.5 - 5.0 2 - 19 H712 C - 005 - †
¾"
5 - 38 H712 C - 010 - †
1 - 10
SAE 12
10 - 76 H712 C - 020 - †
2 - 20
3 - 30 10 - 115 H712 C - 030 - †
0.2 - 2.0 1 - 7.5 H782 C - 002 - †
0.5 - 5.0 2 - 19 H782 C - 005 - †
5 - 38 H782 C - 010 - †
1 - 10
1"
10 - 76 H782 C - 020 - †
2 - 20
SAE 16
3 - 30 10 - 115 H782 C - 030 - †
4 - 40 15 - 150 H782 C - 040 - †
5 - 50 20 - 190 H782 C - 050 - †
3 - 30 10 - 110 H812 C - 030 - †
5 - 50 20 - 190 H812 C - 050 - †
1¼"
10 - 75 40 - 280 H812 C - 075 - †
SAE 20
10 - 100 50 - 380 H812 C - 100 - †
10 - 150 50 - 560 H812 C - 150 - †
3 - 30 10 - 110 H882 C - 030 - †
5 - 50 20 - 190 H882 C - 050 - †
1½"
10 - 75 40 - 280 H882 C - 075 - †
SAE 24
10 - 100 50 - 380 H882 C - 100 - †
10 - 150 50 - 560 H882 C - 150 - †
¼"
SAE 6
¼"
SAE 6
(example) H 713 C - 030 - F1
or
H213 C - 002 - †
H213 C - 005 - †
H213 C - 010 - †
H213 C - 020 - †
H613 C - 001 - †
H613 C - 002 - †
H613 C - 005 - †
H613 C - 010 - †
H613 C - 015 - †
H713 C - 002 - †
H713 C - 005 - †
H713 C - 010 - †
H713 C - 020 - †
H713 C - 030 - †
H783 C - 002 - †
H783 C - 005 - †
H783 C - 010 - †
H783 C - 020 - †
H783 C - 030 - †
H783 C - 040 - †
H783 C - 050 - †
H813 C - 030 - †
H813 C - 050 - †
H813 C - 075 - †
H813 C - 100 - †
H813 C - 150 - †
H883 C - 030 - †
H883 C - 050 - †
H883 C - 075 - †
H883 C - 100 - †
H883 C - 150 - †
PRESSURE
RATING
OPTIONS
Flow-Alert
1 SWITCH /
2 SWITCH
5000 PSI
3000 PSI
Not Available
3000 PSI
F1/F2
F1/F2
2500 PSI
F1/F2
2500 PSI
F1/F2
2450 PSI
F1/F2
2450 PSI
F1/F2
Flow-Alert
MULTIPLE
Not Available
S
E
E
O
P
T
I
O
N
S
B
E
L
O
W
MR
MR
MR
MR
MR
MR
F2
F1 = Single Switch
F2 = Double Switch
Options:
(example) H 713 C - 030 - MR
NOTE: ¼" liquid meters for .02-0.2 and .05-0.5 GPM ranges available
in strap-on design for RS1NO and RS1NC only.
0-5 VDC
0-10 VDC
4-20 mA
}
REDUCE DOWN TIME
FAX 800-245-3569 35
For Water Fluids
NOMINAL
PORT
SIZE
FLOW RANGE
GPM
LPM
SAE
NPTF
.02 - 0.2 0.1 - 0.75 H204 C - 002 - †
.05 - 0.5 0.2 - 1.9 H204 C - 005 - †
0.1 - 1.0 0.5 - 3.75 H204 C - 010 - †
0.2 - 2.0 1.0 - 7.5 H204 C - 020 - †
0.1 - 1.0 0.5 - 3.75 H604 C - 001 - †
0.2 - 2.0 1 - 7.5
H604 C - 002 - †
½"
0.5 - 5.0 2 - 19
H604 C - 005 - †
SAE 10
5 - 38
1 - 10
H604 C - 010 - †
4 - 56
1 - 15
H604 C - 015 - †
0.2 - 2.0 1 - 7.5
H704 C - 002 - †
0.5 - 5.0 2 - 19
H704 C - 005 - †
¾"
5 - 38
1 - 10
H704 C - 010 - †
SAE 12
10 - 76
2 - 20
H704 C - 020 - †
3 - 30 10 - 115 H704 C - 030 - †
0.2 - 2.0 1 - 7.5
H754 C - 002 - †
0.5 - 5.0 2 - 19
H754 C - 005 - †
5 - 38
1 - 10
H754 C - 010 - †
1"
10 - 76
2 - 20
H754 C - 020 - †
SAE 16
3 - 30 10 - 115 H754 C - 030 - †
4 - 40 15 - 150 H754 C - 040 - †
5 - 50 20 - 190 H754 C - 050 - †
3 - 30 10 - 110 H804 C - 030 - †
5 - 50 20 - 190 H804 C - 050 - †
1¼"
10 - 75 40 - 280 H804 C - 075 - †
SAE 20
10 - 100 50 - 380 H804 C - 100 - †
10 - 150 50 - 560 H804 C - 150 - †
3 - 30 10 - 110 H854 C - 030 - †
5 - 50 20 - 190 H854 C - 050 - †
1½"
10 - 75 40 - 280 H854 C - 075 - †
SAE 24
10 - 100 50 - 380 H854 C - 100 - †
10 - 150 50 - 560 H854 C - 150 - †
 Fractional sizes apply to NPTF.
¼"
SAE 6
¼"
SAE 6
(example) H 705 C - 030 - F1
or
H205 C - 002 - †
H205 C - 005 - †
H205 C - 010 - †
H205 C - 020 - †
H605 C - 001 - †
H605 C - 002 - †
H605 C - 005 - †
H605 C - 010 - †
H605 C - 015 - †
H705 C - 002 - †
H705 C - 005 - †
H705 C - 010 - †
H705 C - 020 - †
H705 C - 030 - †
H755 C - 002 - †
H755 C - 005 - †
H755 C - 010 - †
H755 C - 020 - †
H755 C - 030 - †
H755 C - 040 - †
H755 C - 050 - †
H805 C - 030 - †
H805 C - 050 - †
H805 C - 075 - †
H805 C - 100 - †
H805 C - 150 - †
H855 C - 030 - †
H855 C - 050 - †
H855 C - 075 - †
H855 C - 100 - †
H855 C - 150 - †
PRESSURE
RATING
OPTIONS
Flow-Alert
1 SWITCH /
2 SWITCH
5000 PSI Not Available
3000 PSI F1/F2
3000 PSI F1/F2
2500 PSI F1/F2
2500 PSI F1/F2
2450 PSI F1/F2
2450 PSI F1/F2
Flow-Alert
MULTIPLE
Not Available
S
E
E
O
P
T
I
O
N
S
B
E
L
O
W
MR
MR
MR
MR
MR
MR
F2
Flow-Alert Flow
Switches
F1 = Single Switch
F2 = Double Switch
Options:
(example) H 705 C - 030 - MR
NOTE: ¼" liquid meters for .02-0.2 and .05-0.5 GPM ranges available
in strap-on design for RS1NO and RS1NC only.
0-5 VDC
0-10 VDC
4-20 mA
}
36 TEL. 800-433-5263
For API Oil / Caustic and Corrosive Liquids
FLOW RANGE
NOMINAL
PORT
SIZE
API - OIL .876 (S.G.) LIQUIDS 1.0 (S.G.)
GPM
LPM
NPTF
NPTF
OPTIONS
Flow-Alert
1 SWITCH /
2 SWITCH
¼"
5000 PSI
5000 PSI
0.1 - 1.0 0.5 - 3.75 H231C - 010 - † H234C - 010 - † Not Available
¼"
0.2 - 2.0
1 - 7.5
½"
0.2 - 2.0
0.5 - 5.0
1 - 10
1 - 15
1 - 7.5
2 - 19
5 - 38
4 - 56
¾"
0.2 - 2.0 1 - 7.5
0.5 - 5.0 2 - 19
5 - 38
1 - 10
10 - 76
2 - 20
3 - 30 10 - 115
1"
0.2 - 2.0 1 - 7.5
0.5 - 5.0 2 - 19
5 - 38
1 - 10
10 - 76
2 - 20
3 - 30 10 - 115
4 - 40 15 - 150
1¼"
3 - 30
5 - 50
10 - 75
10 - 100
10 - 110
20 - 190
40 - 280
50 - 380
1½"
3 - 30
5 - 50
10 - 75
10 - 100
10 - 110
20 - 190
40 - 280
50 - 380
(example) H 734 C - 030 - F1
3000 PSI
3000 PSI
H231C - 020 - † H234C - 020 - †
3000 PSI
H631C - 002 H631C - 005 H631C - 010 H631C - 015 2500 PSI
H731C - 002 H731C - 005 H731C - 010 H731C - 020 H731C - 030 2500 PSI
H831C - 030 H831C - 050 H831C - 075 H831C - 100 2450 PSI
H841C - 030 H841C - 050 H841C - 075 H841C - 100 -
†
†
†
†
†
†
†
†
†
†
†
†
†
†
†
†
†
†
†
†
†
†
†
3000 PSI
H634C - 002 - †
H634C - 005 - †
H634C - 010 - †
H634C - 015 - †
2500 PSI
H734C - 002 - †
H734C - 005 - †
H734C - 010 - †
H734C - 020 - †
H734C - 030 - †
2500 PSI
H834C - 030 H834C - 050 H834C - 075 H834C - 100 2450 PSI
H844C - 030 H844C - 050 H844C - 075 H844C - 100 -
F1/F2
F1/F2
F1/F2
†
†
†
†
†
†
F1/F2
†
†
†
†
F1/F2
†
†
†
†
F1/F2
Flow-Alert
REED SWITCH
MULTIPLE
OUTPUT
SENSOR
Not Available
S
E
E
O
P
T
I
O
N
S
B
E
L
O
W
MR
MR
MR
MR
MR
MR
or F2
F1 = Single Switch
F2 = Double Switch
Options:
(example) H 734 C - 030 - MR
0-5 VDC
Flow Transmitter is factory-calibrated
0-10 VDC
to provide 4 mA (0 VDC) at zero flow
4-20 mA
and 20 mA (5/10 VDC) at full flow.
Optional 5-point calibration certificate available
}
IMPROVE EFFICIENCY
NOTE: ¼" liquid meters for 0.1-1.0 GPM range
NOTE: For 50% and 100% flow/pressure drop information,
see page 21. For detailed pressure drop charts, see Hedland
full-line catalog.
FAX 800-245-3569 37
NOMINAL
PORT
SIZE
¼"
¼"
½"
¾"
1"
1¼"
1½"
MODEL NUMBER
FLOW RANGE
GASES 1.0 (S.G.)
SCFM
L/SEC
NPTF
2.0 - 20
3.0 - 30
3 - 25
5 - 50
3 - 25
5 - 50
10 - 100
15 - 150
3 - 25
5 - 50
10 - 100
15 - 150
25 - 250
3 - 25
5 - 50
10 - 100
15 - 150
25 - 250
20 - 200
40 - 400
60 - 600
80 - 800
20 - 200
40 - 400
60 - 600
80 - 800
OPTIONS
(see example below)
1-9
1.5 - 14
2 - 12
3 - 22
2 - 12
3 - 22
5 - 47
7 - 70
1.5 - 11.5
2 - 23
5 - 47. 5
7 - 70
10 - 118
1.5 - 11.5
2 - 23
5 - 47.5
7 - 70
10 - 118
10 - 95
20 - 180
30 - 280
50 - 350
10 - 95
20 - 180
30 - 280
50 - 350
Flow-Alert
1 SWITCH /
2 SWITCH
H237C
H237C
H237C
H237C
H637C
H637C
H637C
H637C
H737C
H737C
H737C
H737C
H737C
H747C
H747C
H747C
H747C
H747C
-
020
030
025
050
025
050
100
150
025
050
100
150
250
025
050
100
150
250
-
†
Not Available
†
†
†
†
†
†
†
†
†
†
†
†
†
†
†
†
†
H837C
H837C
H837C
H837C
-
200
400
600
800
-
†
†
†
†
F1/F2
H847C
H847C
H847C
H847C
-
200
400
600
800
-
†
†
†
†
F1/F2
Flow-Alert
MULTIPLE
F1/F2
F1/F2
F1/F2
F1/F2
S
E
E
O
P
T
I
O
N
S
B
E
L
O
W
Not Available
MR
MR
MR
MR
MR
MR
Pressure Rating 1500 PSI (103 Bar)
(example) H 737 C - 250 - F1
or F2
Flow-Alert Flow
Switches
F1 = Single Switch
F2 = Double Switch
Options:
NOTE: ¼" air meters for 2.0-20 and 3.0-30
SCFM ranges available in strap-on design
for RS1NO and RS1NC only.
(example) H 737 C - 250 - MR
0-5 VDC
0-10 VDC
4-20 mA
}
CAUTION: High flow gas shock may decouple indicator.
38 TEL. 800-433-5263
SIMPLE TO USE
For Air / Compressed Gases
NOMINAL
PORT
SIZE
FLOW RANGE
PRESSURE
OPTIONS
SCFM
L/SEC
SAE
NPTF
RATING
Flow-Alert
1 SWITCH /
2 SWITCH
¼"
SAE 6
0.5 - 5
1 - 10
2 - 20
3 - 30
0.2 - 2.2
0.5 - 4.75
1-9
1.5 - 14
H270 C - 005 - †
H270 C - 010 - †
H270 C - 020 - †
H270 C - 030 - †
H271 C - 005 - †
H271 C - 010 - †
H271 C - 020 - †
H271 C - 030 - †
1500 PSI
Not
Available
¼"
SAE 6
3 - 25
5 - 50
2 - 12
3 - 22
H270 C - 025 - †
H270 C - 050 - †
H271 C - 025 - †
H271 C - 050 - †
1500 PSI
½"
SAE 10
3 - 25
5 - 50
10 - 100
15 - 150
2 - 12
3 - 22
5 - 47
7 - 70
H670 C - 025 - †
H670 C - 050 - †
H670 C - 100 - †
H670 C - 150 - †
H671 C - 025 - †
H671 C - 050 - †
H671 C - 100 - †
H671 C - 150 - †
1500 PSI
3 - 25
5 - 50
10 - 100
15 - 150
25 - 250
3 - 25
5 - 50
10 - 100
15 - 150
25 - 250
1.5 - 11.5
2 - 23
5 - 47.5
7 - 70
10 - 118
1.5 - 11.5
2 - 23
5 - 47.5
7 - 70
10 - 118
H770 C - 025 - †
H770 C - 050 - †
H770 C - 100 - †
H770 C - 150 - †
H770 C - 250 - †
H790 C - 025 - †
H790 C - 050 - †
H790 C - 100 - †
H790 C - 150 - †
H790 C - 250 - †
H771 C - 025 - †
H771 C - 050 - †
H771 C - 100 - †
H771 C - 150 - †
H771 C - 250 - †
H791 C - 025 - †
H791 C - 050 - †
H791 C - 100 - †
H791 C - 150 - †
H791 C - 250 - †
1¼"
SAE 20
20 - 200
40 - 400
60 - 600
80 - 800
100 - 1000
10 - 95
20 - 180
30 - 280
50 - 350
50 - 475
H870 C - 200 - †
H870 C - 400 - †
H870 C - 600 - †
H870 C - 800 - †
H870 C - 999 - †
H871 C - 200 - †
H871 C - 400 - †
H871 C - 600 - †
H871 C - 800 - †
H871 C - 999 - †
1500 PSI
1½"
SAE 24
20 - 200
40 - 400
60 - 600
80 - 800
100 - 1000
10 - 95
20 - 180
30 - 280
50 - 350
50 - 475
H890 C - 200 - †
H890 C - 400 - †
H890 C - 600 - †
H890 C - 800 - †
H890 C - 999 - †
H891 C - 200 - †
H891 C - 400 - †
H891 C - 600 - †
H891 C - 800 - †
H891 C - 999 - †
1500 PSI
¾"
SAE 12
1"
SAE 16
(example) H 771 C - 250 - F1 or
1500 PSI
1500 PSI
Flow-Alert
REED
SWITCH
S
F1/F2 E
E
F1/F2
O
P
F1/F2 T
I
O
N
F1/F2 S
B
F1/F2 E
L
O
W
F1/F2
MULTIPLE
OUTPUT
SENSOR
Not
Available
MR
MR
MR
MR
MR
MR
F2
Flow-Alert Flow
Switches
F1 = Single Switch
F2 = Double Switch
Options:
(example) H 771 C - 250 - MR
NOTE: ¼" air meters for .05-5, 1-10, 2-20 and 3-30 SCFM ranges
0-5 VDC
0-10 VDC
4-20 mA
}
CAUTION: High flow gas shock may decouple indicator.
ENHANCED RESOLUTION
FAX 800-245-3569 39
WEIGHTS
For all Flow Meter Models
¼ Standard Meter
¼ High Temperature
¼ API Oil/Caustic & Corrosive Liquids & Gases
¼ Pneumatic Meter with Extended Cap
¼ Pneumatic Meter w/ Extended Cap w/Gauge
Test Kit w/Ext. Cap/Gauge/Valve
¼ Flow-Alert Flow Switch
¼ Flow Transmitter
½ Standard Meter
½ Liquid Test Kit
½ High Temperature
½ API Oil/Caustic & Corrosive Liquids & Gases
½ Pneumatic Meter with Extended Cap
½ Pneumatic Meter w/Extended Cap w/Gauge
½ Flow-Alert Flow Switch
½ Flow Transmitter
¾ Standard Meter
¾ Liquid Test Kit
¾ High Temperature
¾ API Oil/Caustic & Corrosive Liquids & Gases
¾ Pneumatic Meter with Extended Cap
¾ Pneumatic Meter w/Extended Cap w/Gauge
¾ Flow-Alert Flow Switch
¾ Flow Transmitter
1 Standard Meter
1 Liquid Test Kit
1 High Temperature
1 API Oil/Caustic & Corrosive Liquids & Gases
1 Pneumatic Meter with Extended Cap
1 Pneumatic Meter w/Extended Cap w/Gauge
1 Flow-Alert Flow Switch
1 Flow Transmitter
1¼ Standard Meter
1¼ Liquid Test Kit
1¼ High Temperature
1¼ API Oil/Caustic & Corrosive Liquids & Gases
1¼ Pneumatic Meter with Extended Cap
1¼ Pneumatic Meter w/Ext. Cap w/Gauge
1¼ Flow-Alert Flow Switch
1¼ 4 Flow Transmitter
1½ Standard Meter
1½ Standard Meter w/C62 Flange
1½ Liquid Test Kit
1½ High Temperature
1½ High Temperature w/C62 Flange
1½ API Oil/Caustic & Corrosive Liquids & Gases
1½ Pneumatic Meter with Extended Cap
1½ Pneumatic Meter w/Extended Cap w/Gauge
1½ Flow-Alert Flow Switch
1½ Flow Transmitter
3 Standard Meter
3 Standard Meter w/C61 Flange
T303 SS
w/Aluminum
Internals
T303 SS
w/Brass
Internals
T316 SS
w/T316 SS
Internals
lbs. (kg)
lbs. (kg)
lbs. (kg)
HOSTILE
ENVIRONMENT
T316 SS
w/T316 Internals
lbs. (kg)
.9 (.41)
CF
~
1.5 (.68)
2.0 (.91)
2.3 (1.1)
5.15 (2.34)
5.10 (2.31)
2.1 (.95)
5.3 (2.4)
CF
~
3.3 (1.5)
3.8 (1.7)
4.3 (2.0)
5.15 (2.34)
5.10 (2.31)
3.5 (1.6)
8.5 (3.9)
4.00 (1.81)
~
6.2 (2.8)
6.7 (3.1)
7.5 (3.4)
6.60 (3.00)
CF
2.7 (1.3)
7.7 (3.5)
4.00 (1.81)
~
5.4 (2.5)
5.9 (2.7)
6.7 (3.1)
5.80 (2.63)
CF
14.6 (6.6)
26.0 (11.8)
CF
~
21.1 (9.6)
21.7 (9.8)
23.8 (10.8)
20.85 (9.46)
CF
14.1 (6.4)
25.8 (11.7)
25.5 (11.6)
CF
CF
~
20.6 (9.4)
21.2 (9.6)
23.3 (10.6)
20.35 (9.23)
CF
~
~
1.05 (.48)
2.75 (1.25)
~
~
~
~
5.50 (2.50)
5.45 (2.47)
2.45 (1.11)
~
2.75 (1.25)
~
~
~
~
5.50 (2.50)
5.45 (2.47)
3.9 (1.8)
~
4.40 (2.00)
~
~
~
~
6.85 (3.11)
CF
3.4 (1.5)
~
4.40 (2.00)
~
~
~
~
6.50 (2.95)
CF
16.8 (7.6)
~
21.40 (9.71)
~
~
~
~
23.05 (10.46)
CF
15.8 (7.2)
~
~
21.40 (9.71)
CF
~
~
~
~
22.05 (10.00)
CF
~
~
~
2.75 (1.25)
3.00 (1.36)
~
~
~
5.80 (2.63)
5.75 (2.61)
~
~
2.75 (1.25)
2.95 (1.34)
~
~
~
5.80 (2.63)
5.75 (2.61)
~
~
4.40 (2.00)
4.40 (2.00)
~
~
~
7.35 (3.33)
CF
~
~
4.40 (2.00)
4.40 (2.00)
~
~
~
7.50 (3.40)
CF
~
~
21.40 (9.71)
21.40 (9.71)
~
~
~
27.65 (12.54)
CF
~
~
~
21.40 (9.71)
CF
21.40 (9.71)
~
~
~
27.65 (12.54)
CF
~
~
~
~
3.00 (1.36)
~
~
~
~
~
~
~
~
2.95 (1.34)
~
~
~
~
~
~
~
~
4.6 (2.1)
~
~
~
~
~
~
~
~
4.60 (2.10)
~
~
~
~
~
~
~
~
CF
~
~
~
~
~
~
~
~
~
~
CF
~
~
~
~
~
~
~
~: Not available as standard option
CF: Consult factory for weights
40 TEL. 800-433-5263
hedland.com
41
Hydraulic Diagnostic Products
Flo-tech manufactures an exceptional line of turbine flow sensors for hydraulic fluids. Flo-tech products are used extensively in hydraulic testing and
analysis; and commonly used on equipment in a variety of industries, including: agriculture, automotive, construction, forestry, marine and mining.
Flo-Check® USB Hydraulic System Analyzer
• Simultaneously measures flow, pressure
and temperature
• Accuracy of ±1% of reading @ 32 cSt
• Field selectable US or metric readings
• USB powered
• Exports saved data to Microsoft Excel®
and other spreadsheet programs
• Select continuous monitoring
or capture data manually
• High and low set point alarms for flow,
pressure, and temperature
• Logs up to 12 hours
• Captures pressure spikes up to 690 bar
(10,000 psi) 0.2 milliseconds duration
• Records alarm history
Flo-tech Portable Hydraulic Testers
• Simultaneously measures flow, pressure and temperature
• Flow ranges from 1-15 to 7-199.9 GPM (4-56 to 26-757 LPM)
• Port sizes from SAE 12 to SAE 24 (G 3/4 to G 1-1/2)
• Internal safety pressure relief disc
• Accuracy of ±1% of full scale (forward flow)
• Temperatures to 300 °F (150 °C)
• Pressures up to 6000 psi (414 bar)
Flo-tech Turbine Flow Sensors
• Simultaneously measures flow, pressure
and temperature
• Available with frequency or
analog output for flow
• Flow ranges from 0.4-7 to 10-350 GPM
(1.5-26 to 37-1324 LPM)
• Accuracy of ±1% of full scale (forward flow)
• Port sizes from SAE 8 to SAE 20, (G 1/4 to
G 1-1/4); SAE 20 to SAE 24, Code 61;
and SAE 20 to SAE 32, Code 62
• Temperatures to 300 °F (150 °C)
• Pressures up to 6000 psi (414 bar)
• Bi-directional flow measurement
available (Quad models)
For additional information about the Flo-tech product line, visit Flo-tech.com
Racine Flow Meter Group
The Racine Flow Meter Group is comprised of six flow meter divisions
representing a variety of measurement technologies. In addition to
Hedland and Flo-tech, the members of this group include:
Blancett – Turbine flow meters for water and other liquid applications
Dynasonics – Ultrasonic flow meters for liquids in full pipe sytems
Preso – Full line of primary flow elements
Racine – Vortex shedding flow meters for gas, steam and liquids
With this unique product mix and a team of dedicated an experienced
personnel, the Racine Flow Meter Group offers high-quality and
cost-effective solutions for most flow measurement applications.
For additional information regarding the Racine Flow Meter Group,
visit the website: www.racinefed.com/flow.
MAILING ADDRESS
P.O. Box 081580
hedland.com
SHIPPING ADDRESS
8635 Washington Avenue
TELEPHONE
262-639-6770
800-HEDLAND
800-433-5263
E-MAIL
[email protected]
FAX
262-639-2267
800-CHK-FLOW
800-245-3569
Hedland, EZ-View, and Flo-Check are registered trademarks of Racine Federated Inc.
Flow-Alert , Flo-tech and Activa are trademarks of Racine Federated Inc.
CSA is a registered trademark of Canadian Standards Association.
Windows and Excel are registered trademarks of Microsoft Corp.
© 2012 Racine Federated Inc., all rights reserved
Form No. 04-INC-CA-00461 1/12 Printed in USA

CRN Registered Hedland Flow Meters

Transcription

Similar documents

Hedland Catalog - Controls Warehouse

(L)I`-i1-? OL`/ L/G CTYkZ 1 oc

Hedland Variable Area Flow Meters Catalog

Some Recent English-Language Poetry from Pakistan