Thermo Scientific CO2 Incubators

Thermo Scientific CO2 Incubators
Advanced CO2 incubators
for clinical laboratories
Thermo Scientific CO2 Incubators
Choice of Proven Designs
Thermo Scientific CO2 incubators provide unsurpassed performance,
reliability and selection with the proven experience of the worldwide
leaders in CO2 incubation technology. Our enhanced and expanded line
of CO2 incubators incorporates advanced technologies and superior
design to provide an ideal, stable culturing environment.
Thermo Scientific CO2 incubators are available in a variety of sizes to
match your capacity requirements. Choose from water or direct heat
temperature control technology; thermal conductivity (TC) or infrared (IR)
sensor based CO2 regulation. Thermo Scientific CO2 incubators offer a
range of solutions to meet your specific culturing requirements and
preferences.
Temperature Control: Water Jacket or Direct Heat?
Whether you prefer the thermal stability of a water
jacket design; or the lightweight, low-maintenance and
high-temperature contamination control of a direct
heat; Thermo Scientific CO2 incubators provide the
ideal environment for your culture.
CO2 Control: Thermal Conductivity or Infrared?
Thermo Scientific CO2 Incubators are available with
thermal conductivity (TC) or infrared (IR) sensors to suit
your preference for precise automatic CO2 control.
TC sensors provide accurate CO2 control in applications
where temperature and humidity values are consistent.
IR sensors are recommended in applications where
temperature and humidity are changed frequently.
Thermo Scientific CO2 Incubators Offer A Range For All Your
Clinical Applications!
• Water jacket or direct heat temperature control
• Unit capacities of 1.4, 5.3, 6.5 and 28-34 cu. ft.
• High temperature decontamination models available
• TC or IR CO2 sensors
02
Thermo Scientific Midi 40 CO2 Incubator
Small capacity for benchtop use
• Low maintenance direct heat incubator with 1.4 cu. ft. stainless steel
• IntrLogicTM II control system for safe, efficient operation
• Easy-to-read digital display
• Space saving for small quantities of cultures
• Microprocessor-based automatic thermal conductivity CO2 control
• Adjustable alarm and RS-485 signal output
chamber
Scratch resistant high
impact painted finish
for easy cleaning
Tempered glass inner door
is heated by outer door to
prevent condensation
Reinforced cabinet
permits stacking
Non-porous silicon gasket
maintains chamber integrity
High visibility vacuum
fluorescent display
for at-a-glance monitoring
from across the room
3-button mode control
for simplified operation
Setpoint security
Radiant wall heating
provides accurate uniform
temperature with natural
air convection
Four stainless steel shelves
Seamless, deep-drawn
stainless steel interior with
easy-to-clean coved corners
Solid outer door
closes gently against the
cabinet with a magnetic
gasket
Removable water reservoir
for relative humidity up to
96% at 37°C
THERMO SCIENTIFIC MIDI 40 CO2 INCUBATOR
TECHNICAL SPECIFICATIONS
TEMPERATURE
Control
Range
Uniformity
Tracking Alarm
CO2
CO2 Control
CO2 Range
Inlet Pressure Required
CO2 Sensor
Readability & Setability
Tracking Alarm
HUMIDITY
RH
Humidity Source
FITTINGS
Access Port
CO2 Inlet
UNIT HEAT LOAD
120V
±0.1°C
5°C above ambient to 60°C (150°F)
±0.4°C @ 37°C (98.6°F)
User-programmable high/low
Better than ±0.1%
0-20%
15 PSIG (1.0 bar)
TC
0.1%
User-programmable high/low
Ambient to 95% @ 37°C (98.6°F)
1.5 gal standard, pan
1.3" (3.3 cm) with removable silicone plug with filter
1/4" hose (barbed)
200 BTU/Hr
SHELVES
Shelf dimensions (w x d) inch
Construction
Surface Area
Max. per Chamber
Standard
CONSTRUCTION
Interior Volume
Interior
Exterior
ELECTRICAL
Rated Voltage
Circuit Breaker/Power Switch
Plug
Alarm Contacts
DIMENSIONS
Exterior (w x h x d) inch/cm
Interior (w x h x d) inch/cm
WEIGHT
Net
Shipping
13.5 x 11.5
Stainless steel, perforated
1.08 sq. ft. (0.1 sq. m)
4.32 sq. ft. (0.40 sq. m)
4
1.4 cu. ft. (39.6 L)
Type 304, mirror finish, stainless steel
18 gauge, cold-rolled steel
120V, 60Hz (Operating range 90-125V)
15 Amp
NEMA 5-15
Power interruption; deviation of temp, CO2
18.5 x 18 x 23.5 (47 x 46.5 x 59.7)
12 x 14 x 14 (30.5 x 46.5 x 35.5)
60 lbs. (28 kg)
70 lbs. (33 kg)
ORDERING INFORMATION
CAT. NO.
DESCRIPTION
J1756-78
Thermo Scientific Midi 40 CO2 Incubator, 1.4 cu. ft. capacity stainless steel chamber, w/ TC CO2 sensor, 120V, 60Hz
03
Thermo Scientific Heracell 150i CO2 Incubators
Surround your valuable cultures with an environment you can trust
• Internal volumes of 5.3 cu. ft.
• Thermo Scientific iCAN touchscreen
places total
control and complete information at your fingertips
• 90°C moist heat decontamination function available for
total contamination control, without removing sensors
• Choice of TC or IR CO2 control
• Dual stack configurations on caster-mounted stands
double useful capacity and save valuable lab space
• Features a unique pan-less humidity water reservoir
which promotes faster humidity recovery
90°C moist heat decontamination for
proven protection
Thermo Scientific Heracell i CO2
incubators are available with an
on-demand, automatic 90°C
decontamination function that
decontaminates the entire chamber
interior without the need to remove
sensors, fittings and shelves.
Independent laboratory tests have
validated that 90°C moist heat
decontamination is highly effective
against a wide range of contaminants,
including mycoplasma.
Exclusive Thermo Scientific iCAN simplifies
operation and enables rapid access of important
information for each critical parameter in the
incubator. iCANTM provides trend analysis for
convenient evaluation of your unit's performance.
Patented humidity system for faster
recovery rates
Our Heracell i series incorporates
a unique integral humidity water
reservoir that provides a high relative
humidity (rH) and allows rapid
recovery of optimal humidity level
after door openings. A water level
sensor indicates when a refill is
needed – via a convenient prompt
on the touchscreen display – to
avoid the desiccation of important
cultures. This pan-less system
04
reduces handling and provides
recovery rates up to five times
faster than ordinary tray humidified
incubators, due to:
• A surface area larger than ordinary
humidity water pans (provided by
a water reservoir with inclined and
rounded corners)
• A patented floor heating system
that operates after door opening
• Direct heat-transfer from heated
floor to humidity reservoir
THERMO SCIENTIFIC HERACELL 150I CO2 INCUBATORS
TECHNICAL SPECIFICATIONS
TEMPERATURE
Control
Range
Uniformity
Tracking Alarm
TEMPERATURE SAFETY
Sensor
Controller
Setability
CO2
CO2 Control
CO2 Range
Inlet Pressure Required
CO2 Sensor
Readability & Setability
Tracking Alarm
HUMIDITY
RH
Humidity Source
FITTINGS
Access Port with Filter
CO2 Inlet
UNIT HEAT LOAD
120V
±0.1°C
3°C above ambient to 55°C (131°F)*
±0.3°C @ 37°C (98.6°F)
User-programmable high/low
Independent thermostat
Independent analog electronic
0.1%
SHELVES
Dimensions (w x h) inch/cm
Construction
Surface Area
Max. per Chamber
Standard, Maximum
CONSTRUCTION
Interior Volume
Ambient to 95% @ 37°C (98.6°F)
3.2 qt. (3.0 L) pan-less reservoir
Interior
Exterior
ELECTRICAL
Rated Voltage
Circuit Breaker/Power Switch
Plug
Alarm Contacts
Data Outputs
DIMENSIONS
Exterior (w x h x d) inch/cm
Interior (w x h x d) inch/cm
1.1/4" (32 mm) with removable silicone plug
1/8" hose (barbed)
WEIGHT
Net
Shipping
Better than ±0.1%
0-20%
15 PSIG (1.0 bar)
TC or IR
0.1%
User-programmable low
16.7 x 17.5 (42.3 x 44.5)
Stainless steel, perforated
2.03 sq. ft. (0.18 sq. m)
6.0 sq. ft. (0.54 sq. m)
3, 10
5.3 cu. ft. (150 L)
Type 304, mirror finish, stainless steel
18 gauge, cold-rolled steel, powder coated
120V, 60Hz
20 Amps
NEMA 5-15
Power interruption; deviation of temp, CO2
RS 232
25 x 34 x 30.2 (63.7 x 86.7 x 76.6)
18.5 x 23.9 x 20.9 (47 x 60.7 x 53)
165 lbs (75 kg)
195 lbs (87 kg)
273 BTU/Hr
ORDERING INFORMATION
CAT. NO.
J1805-25
DESCRIPTION
Heracell 150i Direct Heat CO2 Incubator, 5.3 cu. ft. capacity stainless steel chamber, w/ TC CO2 sensor, 120V, 60Hz
J1805-27
Heracell 150i Direct Heat CO2 Incubator, 5.3 cu. ft. capacity stainless steel chamber, w/ IR CO2 sensor, 120V, 60Hz
J1805-26
Heracell 150i Direct Heat Dual Stack, 2 x 5.3 cu. ft. capacity stainless steel chambers, w/ TC CO2 sensor, 120V, 60Hz
and mobile support stand
J1805-31
Roller base, support frame
J1805-32
Additional stainless steel shelf, full-width, 2 support rails
J1805-33
External Gas Guard
J1805-34
CO2 gas regulator, 2-stage
iCAN touchscreen improves your visibility and control of important incubator
information helping you to achieve your culturing goals
• Door mounted for easy accessibility and viewing
• Easy to use: convenient on-screen user prompts
• Select from a variety of languages
• Visibility to changes in culture environment: on screen logs and
usage recording
• Monitor alarm alerts visually on the display
05
Thermo Scientific Water Jacket CO2 Incubators
Unsurpassed thermal protection for your cultures
• Unique
triple-wall construction protects against ambient
temperature fluctuations
• Large 6.5 cu. ft. corrosion resistant stainless steel chamber
• Patented, heated dual-pane, inner-glass door minimizes
condensation with improved responsiveness and faster
temperature recovery.
• Internal shelves are easily installed and removed without
tools for easy cleaning.
• Remote alarm contacts for connection to in-house alarm
system
• Stacking kit included to create a dual stack configuration.
• Choice of TC or IR sensor based CO2 control
Superior water jacket design for
unexcelled security
Thermo Scientific Water Jacket CO2
incubators protect your cultures by
surrounding them with an insulated
triple-wall cabinet construction and
a jacket of temperature conditioned
water, providing unsurpassed
protection against unwanted heat
loss, even in the event of a power
outage!
Class 100 HEPA Filtered Air Protection
Class 100 HEPA airflow is the
preferred method of protection
of water jacket incubators. Inchamber HEPA air filtration system
continuously filters the entire
chamber volume every minute,
creating cleanroom Class 100
conditions to preserve your aseptic
culturing environment. With airborne
contaminants from routine door
openings the primary source of
contamination in most cell culture
laboratory settings, the full time
protection of the HEPA airflow
system safeguards your cultures
and minimizes downtime.
06
Easy to clean
• Polished stainless steel interior
with 100% coved corners is easy
to clean, saves time and reduces
contamination risk.
• Sturdy stainless steel shelves and
supports can be readily removed
without tools for easy cleaning,
autoclaving or adjustment.
• Patented inner-door gasket is
removable and cleanable, and
adjusts continually to ensure a
tight seal.
• In-chamber HEPA filter snap-fits,
making it easy to remove without
tools.
Thermo Scientific water jacket CO2
incubators feature a large 6.5 cu. ft.
capacity, corrosion-resistant,
stainless steel chamber. Our
incubators are the ideal choice
for laboratories concerned with
subjecting their cultures to potential
disruption of power or significant
ambient temperature fluctuations.
THERMO SCIENTIFIC WATER JACKET CO2 INCUBATORS
TECHNICAL SPECIFICATIONS
TEMPERATURE
Control
Range
Uniformity
Tracking Alarm
TEMPERATURE SAFETY
Sensor
Controller
Setability
CO2
CO2 Control
CO2 Range
Inlet Pressure Required
±0.1°C
5°C above ambient to 55°C (131°F)*
±0.2°C @ 37°C (98.6°F)
User-programmable high/low
Precision thermistor
Independent analog electronic
0.1%
CO2 Sensor
Readability & Setability
Tracking Alarm
Better than ±0.1%
0-20%
15 PSIG (1.0 bar)
TC or IR
0.1%
User-programmable high/low
HUMIDITY
RH
Humidity Source
3.2 qt. (3.0 liters) standard, pan
FITTINGS
Fill Port
Drain Port
Access Port
CO2 Inlet
UNIT HEAT LOAD
120V
Ambient to 95% @ 37°C (98.6°F)
3/8" hose (barbed)
1/4" hose (barbed)
1.3" (3.3 cm) with removable silicone plug with filter
1/4" hose (barbed)
SHELVES (CONTINUED)
Dimensions (w x h) inch/cm
Construction
Surface Area
Max. per Chamber
Standard, Maximum
Water Jacket Volume
CONSTRUCTION
Interior Volume
Interior
Exterior
ELECTRICAL
Rated Voltage
18.5 x 18.5 (47 x 47)
Stainless steel, perforated
2.4 sq. ft. (0.2 sq. m)
40.8 sq. ft. (3.8 sq. m)
4, 17
11.7 gal. (43.5 L)
6.5 cu. ft. (184.1 L)
Type 304, mirror finish, stainless steel
18 gauge, cold-rolled steel, powder coated
Circuit Breaker/Power Switch
Plug
Alarm Contacts
120V, 60Hz, 3.6 FLA
(Operating range 90-125V)
6 Amps/2 Pole
NEMA 5-15
Power interruption; deviation of temp, CO2
DIMENSIONS
Exterior (w x h x d) inch/cm
Interior (w x h x d) inch/cm
26 x 39.5 x 25 (66.8 x 100.3 x 63.5)
21.3 x 26.8 x 20 (54.1 x 68.1 x 50.8)
WEIGHT
Net
Net Operational
Shipping
265 lbs. (120.2 kg)
365 lbs. (166 kg)
324 lbs. (147 kg)
344 BTU/Hr
ORDERING INFORMATION
CAT. NO.
J1805-28
DESCRIPTION
Thermo Scientific Water Jacket CO2 Incubator 3010, 6.5 cu. ft. capacity stainless steel chamber, w/ TC CO2 sensor, 120V, 60Hz
J1805-29
Thermo Scientific Water Jacket CO2 Incubator 3020, 6.5 cu. ft. capacity stainless steel chamber, w/ IR CO2 sensor, 120V, 60Hz
J1805-35
Roller base
J1805-47
HEPA filter airflow system, factory installed
J1805-36
Stainless steel shelf kit (includes shelf channels and shelf)
J1805-37
Stainless steel humidity pan (small)
J1805-38
Replacement HEPA & inline filter kit
J1805-39
Two stage CO2 regulator
J1805-40
External gas guard, 120V
07
Thermo Scientific Large Capacity CO2 Incubators
Expanded capacity for high throughput laboratories
Our advanced model 3950 offers beneficial features for
optimal culturing environment.
• Internal volume of 29 cu. ft.
• Heated triple-pane glass door minimizes condensation and
permits a clear view of your product.
• Horizontal airflow provides tighter temperature uniformity
for optimum culturing environment.
• Adjustable rH system – three convenient settings: low,
medium and high
• Enviro-ScanTM Microprocessor Message Center allows you
to control all parameters without complicated programming.
Standard remote alarm contacts and available
data outputs allow connection to an in-house
monitor/alarm system to track chamber
conditions, helping you meet internal and
regulatory documentation requirements
Interior and exterior accessory receptacles
provide a convenient power source
Two thru-wall access ports (one on right and
left sidewalls) for easy addition of probes,
sensors, or power cords
Heavy-duty, solid stainless steel shelves are
easy-to-clean, corrosion resistant
Swivel, locking casters ensure easy mobility
for installation and cleaning. Leveling feet
provide stability for added safety in the lab.
Advantages of a Directed Horizontal
Laminar Airflow System
Our advanced 3950 incubator’s
directed airflow system includes a
positive pressure feed plenum on
the left side of the chamber and a
negative pressure return plenum on
the right. This combination directs
08
air across the surface of each solid
shelf. Even when filled with samples
or equipment, each shelf receives a
consistent flow of conditioned air
for optimum temperature uniformity
and recovery. Our design ensures
the feed plenum cannot be blocked
by the chamber’s contents.
Our Standard models 393 and 397 provide large storage
capacity at superior value.
• Accurate, microprocessor-based controls and TC CO2
sensor for precise and reliable control
• Homogeneous, vertical flow, air circulation system
eliminates chamber stratification
• Each model includes five shelves
• Optional CO2 autochange switches automatically from
empty to full cylinders
• A security password feature protects your set points to
prevent unwanted changes
397 is our standard model in a 28 cu. ft. size with full size
heated glass door for easy visibility and condensation
free operation. The humidity is generated by a
removable water pan in the bottom of the chamber.
393 is our standard plus model in size and features.
The 393 offers the largest capacity, 34 cu. ft., with
built-in humidity control and display, and a solid door.
CO2 and Temperature Control
• Temperature range is from 5°C above ambient to 60°C.
• CO2 concentration is from 0-20% with ±0.1% control
as monitored by a TC sensor.
• Audible alarm notifies you of temperature deviations
±1°C and CO2 deviations greater than 1% from the
set point, excluding deviations due to door openings
09
THERMO SCIENTIFIC LARGE CAPACITY CO2 INCUBATOR
TECHNICAL SPECIFICATIONS
LARGE CAPACITY STANDARD CO2 INCUBATOR
393/397
397
TEMPERATURE
Control
Range
Uniformity
Overtemp
CO2
Control
Range
Inlet Pressure Required
Sensor Type
Readability & Setability
Alarm
HUMIDITY
rH
Humidity Source
FITTINGS
Fill Port
Drain
CO2 Inlet
UNIT HEAT LOAD
120V
393
±0.1°C
5°C above ambient to 60°C
0.5°C @ 37°C
0 - 121°C
±0.1°C
5°C above ambient to 60°C
0.5°C @ 37°C
0 - 121°C
0,10%
0-20%
15 PSIG
TC
0.1%
±1% above/below set point
0,10%
0-20%
20 PSIG
TC
0.1%
±1% above/below set point
NA not controlled
ambient to 98% at 37°C
Pan, 1 gal. (4 L)
20% above ambient
to 98% at 37°C
Integral humidifier
(3 lbs. per hour)
N/A
N/A
1/4" hose (barbed)
Compression fitting 1/4"
floor mounted, plugged
1/4" hose (barbed)
7.5 Amps., 900W
10 Amps., 1200W
SHELVES
Dimension
Construction
Surface Area (sq. in.)
Max. per Chamber (sq. in.)
Standard, Maximum
CONSTRUCTION
Interior Volume
Interior
Exterior
Outer door
ELECTRICAL
All
Circuit Breaker/Power Switch
Plug
Alarm Contacts
DIMENSIONS
Exterior
Interior
WEIGHT
Net
Shipping
397
393
20" x 27.9"
Stainless steel, perforated
558
3348 standard / 6138 max.
6 / max. 11
24.2" x 35.2"
Stainless steel, perforated
852
4260 standard / 7668 max.
5 / max 9
28 cu. ft. (793 L)
304, mirror finish, stainless steel
18 gauge 430 stainless steel,
powder coated
glass, heated, no lock
34 cu. ft. (963 L)
304 stainless steel
18 gauge cold rolled steel,
powder coated
solid, lockable
120V, 60Hz, 8A
15 Amp/16 Amp green lighted
NEMA 5-15
None (internal audible alarm)
(w x h x d)
33.5 x 76.5 x 28.75
28.5 x 63.5 x 26.75
120V, 60Hz, 11.7A
15 Amp/16 Amp green lighted
NEMA 5-15
None (internal audible alarm)
625 lbs. (383kg)
900 lbs. (408 kg)
660 lbs. (299kg)
1020 lbs. (463kg)
42 x 91 x 35
36 x 65 x 25
LARGE CAPACITY ADVANCED CO2 INCUBATOR
3950
TEMPERATURE
Control
Range
Uniformity
Tracking Alarm
TEMPERATURE SAFETY
Sensor
Controller
Setability
CO2
CO2 Control
CO2 Range
Inlet Pressure Required
CO2 Sensor
Readability & Setability
Tracking Alarm
HUMIDITY
RH
Humidity Source
FITTINGS
Access Port
CO2 Inlet
Water Inlet
Condensate Drain
Overflow Drain
UNIT HEAT LOAD
115V
10
±0.1°C
5°C above ambient to 60°C (40°F)
±0.3°C @ 37°C (98.6°F)
User-programmable high/low
Precision thermistor
Independent analog electronic
0.1%
Better than ±0.1%
0-20%
15 PSIG (1.0 bar)
TC
0.1%
User-programmable high/low
Ambient to 95% @ 37°C (98.6°F)
3.2 qt. (3.0 liters) standard, pan
2.4" (6.1cm) I.D., one on each side, with stopper
1/4" hose (barbed)
1/4" MPT
3/8" FPT
3/8" MPT
510 BTU/Hr
SHELVES
Dimensions (w x h) inch/cm
Construction
Surface Area
Max. per Chamber
Standard, Maximum
Water Jacket Volume
CONSTRUCTION
Interior Volume
Interior
Exterior
Insulation
Exterior Door
Outer Door Gasket
ELECTRICAL
Rated Voltage
Circuit Breaker/Power Switch
Plug
Alarm Contacts
DIMENSIONS
Exterior inch/cm
Interior inch/cm
WEIGHT
Net
Shipping (Motor)
30.6 x 25.8 (77.7 x 65.5)
Type 304, 2B finish, solid stainless steel
5.4 sq. ft (0.5 sq. m)
145.8 sq. ft. (13.5 sq. m)
4, 17
11.7 gal. (43.5 L)
29.0 cu. ft. (821.2 liters)
Type 304, 2B finish, stainless steel
Cold-rolled steel, powder coated
2.0" (5.1cm) fiberglass
Heated, triple pane, tempered glass
Molded vinyl
115V, 50/60Hz, 10.0 FLA
(Operating range 90-125V)
15 Amps/2 Pole
NEMA 5-15
Power interruption; deviation of temp, CO2
(w x h x d)
38 x 80 x 33 (96.5 x 203.2 x 83.8)
31 x 60 x 27 (78.7 x 152.4 x 68.6)
500 lbs. (226.8 kg)
660 lbs. (299.4 kg)
ORDERING INFORMATION
CAT. NO.
J1397-10
DESCRIPTION
Large Capacity CO2 Incubator Standard, Model 397, 28 cu. ft., capacity stainless steel chamber, w/ TC CO2 sensor, 120V, 60Hz
J1752-30
Large Capacity CO2 Incubator Standard Plus Model 393, 34 cu. ft. capacity stainless steel chamber, w/ TC CO2 sensor,
Water Jacket, 120V, 60Hz
J1805-30
Large Capacity CO2 Incubators Advanced Model 3950, selectable RH, 29 cu. ft., TC CO2 sensor, 115V, 60Hz
J1805-41
Carboy Kit, for model 3950, 2 Gallon (7.8 Liters), autoclavable with valve, adaptor hose & mounting bracket, customer installed
J1805-42
Lexan inner door kit for 3950, factory installed
J1805-43
Door lock assembly for 3950, factory installed
J1805-44
Universal door cover for glass doors, factory installed for 3950
J1805-45
Stainless steel shelf kit for 3950
J1805-46
Perforated shelf kit for 3950
J1805-39
Two stage CO2 regulator
J1805-40
External gas guard
11
For additional information, please call
your Cardinal Health sales representative
or customer service at 1.800.964.5227
Lit No.
Cardinal Health
7000 Cardinal Place
Dublin, Ohio 43017
cardinalhealth.com
© 2009 Thermo Fisher Scientific Inc. All rights reserved. All trademarks
are the property of Thermo Fisher Scientific Inc. and its subsidiaries.
Specifications, terms and pricing are subject to change. Not all products
are available in all countries. Please consult your local sales representative
for details.