trinity - Komputronik.pl

NZXT.
CRAFTED GAMING ARMOR.
TRINITY
User’s manual
NZXT. 1
Thank you.
Dear Valued Customers,
Thank you for purchasing our product. With the
booming of the gaming market and computer cases, NZXT
would like to differentiate ourselves from other case companies
by continuously providing innovative next generation cases.
With every product, we hope to break more boundaries and
limits. I hope you like our products and look for us again in your
future purchases. Any comments and critiques are always
welcome. Thank you again.
After you complete your installation, please come by our community
forums at www.nzxt.com/forum, come meet our team and fellow fans
of NZXT.
Sincerely,
NZXT Team
NZXT. 2
Trinity Specifications
MOTHERBOARDS: ATX, MICRO-ATX, BABY AT,
2 X USB 2.0
2 X Audio Port
DRIVE BAYS:
5 EXTERNAL 5.25” DRIVE BAYS
1 EXTERNAL 3.5” DRIVE BAY
4 INTERNAL 3.5” DRIVE BAYS
CHASSIS
DIMENSIONS (WXDXH): 200 X 451 X 430 MM
CHASSIS MATERIAL: SECC STEEL
NET WEIGHT : 6.6 Kg
COOLING OPTIONS
FRONT, 1 X 120/90/80 mm Fan
REAR, 1 X 80 mm Fan ( Included )
SIDE, 1 X 80 mm Blue LED Fan ( Included )
Features
Steel Plated Front Panel
Using a thin metal plate, NZXT used an
Gunmetal Chrome treatment to give the Trinity
the “sexy” touch.
Thermal Display Meter
The thermal meter monitors your system
activitiy and temperature, keeping you updated
at all times.
Stealthed Side Panel
First Introduced on the Nemesis, the stealthed
side panel is the first to hide all screws for a sleeker
and cleaner look.
Screwless Rail Mounting Drivebays ( 3.5”/5.25” )
Without the use of any screws, the rail mounting
system offers easy and fast access to your drive bays during
installation and upgrades.
NZXT. 3
Power Supply Installation
Please refer to the case interior infrastructure and secure the power
supply at the back of the case by using the screws provided.
NOTE: CPU, RAM and any peripheral installation are not
included in this manual. Please refer to your motherboard manual
for related mounting instructions and troubleshooting.
Motherboard Installation
Your Trinity supports the following motherboard: ATX, BABY AT,
MINI ATX, and MICRO ATX. The Index for the standoff holes are as
follows. ( Imprinted on the motherboard tray are serial numbers that
match certain motherboards )
A1~A10 ATX
B1~B9 MICRO ATX
In order to install your motherboard go through the following steps:
1. Lay your case down so you can see the drive cages and the
standoff holes on the motherboard tray.
2. Take your motherboard and match the standoff holes.
3. Remembering which standoff holes your motherboard
needs, go ahead and screw the brass standoffs onto the
motherboard tray. ( Note: If you find that some holes are
unused, this is normal, this case is made to support for many
motherboard sizes )
4. Place your motherboard on top of the brass standoffs and
attach it to the tray using screws provided.
5. Connect the 20-pin ATX power connector from your power
supply (and AUX or +12V connectors if appropriate) to your
motherboard.
NZXT. 4
Power and Reset Switch, HDD LED Installation
Please refer first to your motherboard manual to find where your
power switch and reset connectors are located.
1. Connect the Reset switch (labeled RESET SW) by
connecting to your motherboard RESET connector. Make
sure you always attach the white wire to ground.
(Blue/White)
2. Connect the Power Switch pin (labeled POWER SW) to the
PWR connector on the motherboard. (Orange/White)
3. Connect the HDD LED (labeled POWER) and HDD LED
connectors to the appropriate headers on your motherboard.
(Red/White, +/-)
All White Pin Connectors correspond to ground.
USB and Audio Installation
USB Installation
1. The USB is located of the ride side on your front panel.
2. Refer to your motherboard manual and match the labels on
the USB port connectors with your motherboard in order to
install.
Audio Port Installation
1. The Audio ports are located at the right side of your front
panel
2. Refer to your motherboard manual and match the labels on
the audio port connectors with your motherboard in order to
install.
3. The green input is the speaker input and the pink input is the
microphone input.
NZXT. 5
Case Pins
Signal Description
MIC-IN
Front Microphone input Signal
MIC-POWER
Front Microphone Power
GROUND
Front Audio Ground
L-OUT
Front Left Channel Audio Signal
R-OUT
Front Right Channel Audio Signal
L-RET
Rear Left Channel Audio Signal
R-RET
Rear Right Channel Audio Signal
ASUS© Pins
MIC2
MICPWR
AGND
Line out_L
Line out_R
BLINE Line
out_L
BLINE Line
out_R
ASUS© Motherboard Pin Assignment
Screwless Rail Installation for 5.25”/3.5” Devices
1. The Trinity comes with a lock on screw less rail design for
fast and east installation. so you can easily pull out and
replace drives. Before beginning installation, please match
your devices with either 5.25”, 3.5” (FDD) or Harddrive
(HDD) pictured below. Note that the rails are also labeled
with the HDD and FDD.
2. The 5.25” and 3.5” drives can be screwed on manually with
a screw driver if your device is not compatible with the rails.
NZXT. 6
(Left to Right) 3.5”, Hard Drive,, and 5.25” devices
(5.25”Devices)
Step 1. Lock the hooks of the rails onto the device and push down
to secure the rail. Make Sure you are attaching the right side ( the
rails are labeled R for right and L for Left ). Complete this for both
sides of the device
Step 2. Remove the front panel by firmly pulling from the bottom of
the front panel while holding your case secure.
NZXT. 7
Step 3. Twist off the steel plating on the case then Slide the device
into position.
3. Repeat the same process for the 3.5” drives.
Secondary 3.5” Device Installation (ie HardDrives)
The Trinity case allows space for four internal 3.5” Devices such as
hard drives. All four devices can fit into the drive cage provided.
Please follow the instructions below:
1. Attach the slides onto the side of the device similar to the
5.25” device installation.
2. Slide the device into the hard drive cage and secure. If you
wish, you can also remove the hard drive cage prior to
installation.
(Removing the Cage) Step 1. Remove the thumbscrew securing the
cage.
NZXT. 8
(Removing the Cage) Step 2. Push down on tab and slide the cage
out.
(Installing the Device) Step 1. After attaching the rails to the two
sides of the hard drive proceed to slide device in.
(Installing the Device) Step 2. Push the device in until it is secure
and you hear the rails lock to the cage.
NZXT. 9
(Installation without Screws) Even without rails, the installation
can be accomplished by matching the screw hole and locking it
manually with a screwdriver.
Fan Installation
(Front/Rear Fan)
(Installing the front fan) Slide in the fan at an angle and secure the
fan with screws from the outside of the fan. Note that the front
panel must be removed first in order to secure the fan. The
Example displayed here is a 120mm Fan, the front has the option
for 120/90/80mm.
NZXT. 10
(Installing the rear fan) Follow the same instructions except the
screws are now secured from the rear of the case. The rear fan also
has the option for 80/90/120mm fans. (a 80mm fan is included
with this case )
( 80mm Slim Side Fan )
The Trinity case comes with the option to install a 80mm
slim fan on the right side of the case ( opposite from the clear side
panel ), in order to complete this installation the user will need to
purchase a 80mm slim fan. The fan can be installed from the
outside after removing the side panel. To secure it remove the
harddrive cage and secure it from the inside of the case.
Support and Service
If you have any more questions or have problems with the
NZXT product you purchased, please contact [email protected] along
with a detailed explanation of your problem and your proof of
purchase. You may inquire about replacement parts at this address.
Thank you again for purchasing an NZXT case. If you have
any more comments or questions. Please visit our website or send
us an email.
NZXT.
www.nzxt.com
[email protected]
NZXT. 11