REALISTIC PAPER CRAFT YZF-R1 Assembly

Assembly Instructions
Thank you for downloading the "YZF-R1"paper craft model. By simply
following this manual while referring to the names and numbers shown
on the parts sheets, you can assemble an authentic-looking replica of
the YZF-R1.
Assembly instructions: Twenty A4-sized sheets.
Paper craft: Twenty-two A4-sized sheets with 312 parts in all
These instructions apply only to the "YZF-R1".
These Paper Craft parts
are easier to work with when printed out on strong, thick paper (like postcard
stock).
2007.11.12
Note
To begin
Basic working method and markings
Tools and materials needed
-Ruler - scissors - blade cutter or "Exacto-knife" - awl or
other pointed tool (for making a folding crease) - felt pen
- pin set - glue - hand towel ( for cleaning your fingers) dictionary or other heavy book ( to press the papers flat).
Solid lines
Fold along these lines.
The printed surface should be
on the outside of the folded shape.
Items of Caution
*Take care when using sharp or pointed objects or when
using bladed cutting tools. Place a heavy sheet of paper
under the paper you want to cut.
*Use glue and other adhesives only in well-ventilated
areas.
*When printing, use a slightly reduced font size. There
may be differences in dimensions, depending on the
type of printer used.
Broken lines
Fold along these lines.
The printed surface should be
on the inside of the folded shape.
Dotted line
Cut along these lines.
How to assemble
*Follow the working method and markings carefully.
*Cut carefully along the outter line with cutting blade,
Exacto-knife or scissors.
Do not fold or cut the parts
marked .
One - point Advice
*Cut carefully with cutting blade, Exacto-knife or
scissors.
Cut out parts marked with an
asterisk(*).
*For folding parts, first use an awl or other pointed
tool to make a light crease along the dotted or solid
line. This will make the folds straight. Avoid making
strong creases, as this will cause the paper to tear.
*As an adhesive, white wood glue is recommended.
Avoid over application as this may cause the paper to
wrinkle.
Red dots are the reference
positions for gluing surfaces.
*Before beginning assembly, test adhesive amounts
on extra paper.
*Occasionally, white spots will be apparent on folds
and cuts. Use a marker or pencil to fill in these spots.
It is recommended that this be done after each stage
of assembly because coloring becomes more difficult
once parts are assembled.
Please glue them by aligning
the red and red/blue and blue
parts if they are marked on
the paper.
2
1 Assembling the Front Cowl & Front Fender
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
Indication of Working Methods
Fold or Curve
Glue
photos below to glue the parts together.
Front Cowl
Fold each relevant part according to the assembly symbols.
Sheet A, 8 parts in total
Please use the
Glue in order from 1 to
4
dots on each component as reference when gluing surfaces.
Reference photo
on the graphic.
A- 2
A- 6
2
A- 7
2
A- 8
3
A- 3
1
1
4
3
A- 4
4
A- 5
A- 1
Front Fender
Sheet B, 3 parts in total
B- 1
B- 2
B- 3
3
Reference photo
2 Assembling the Meter & Brake Caliper
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
Indication of Working Methods
Fold or Curve
Glue
photos below to glue the parts together.
Meter
Fold each relevant part according to the assembly symbols.
Sheet B, 12 parts in total
Glue in order from 1 to
Please use the
8
dots on each component as reference when gluing surfaces.
Reference photo
on the graphic.
B- 10
B- 5
B- 6
B- 11
6
4
1
B- 13
3
B- 4
B- 12
2
7
4
B- 7
8
3
B- 8
2
5
B- 9
B- 14
B- 15
Brake Caliper
Reference photo
Sheet B, 6 parts in total
Glue in order from 1 to
2
on the graphic.
B- 16(19)
*Assemble both sides. The diagram
shows the left side. The number inside
the ( ) is for the right side.
B- 17(20)
2
1
2
B- 18(21)
4
3 Assembling the Steering
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
Indication of Working Methods
Fold or Curve
Glue
photos below to glue the parts together.
Steering
Fold each relevant part according to the assembly symbols.
Sheet B, 19 parts in total
Please use the
Glue in order from 1 to
6
dots on each component as reference when gluing surfaces.
on the graphic.
B- 26
B- 22
[ Upper Steering Column ]
DO NOT glue the upper and the lower parts
of the steering column at this stage.
B- 28
1
B- 25
B- 27
B- 34
B- 31
5
2
1
5
B- 32
2
B- 33
B- 24
[ Lower Steering Column ]
6
B-23
B- 35
B- 36
4
3
4
3
B- 38
B- 37
B- 40
B- 30
B- 29
B- 39
5
Reference photo
4 Assembling the Frame 1
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
Fold or Curve
Indication of Working Methods
Glue
photos below to glue the parts together.
Frame 1
Fold each relevant part according to the assembly symbols.
Sheet C, 18 parts in total
Please use the
dots on each component as reference when gluing surfaces.
Glue in order from 1 to 12 on the graphic.
C- 6
C- 4
10
C- 8
7
C- 18
8
C- 16
9
C- 15
6
6
11
C- 17
C- 3
C- 1
6
12
8
C- 2
9
7
10
C- 14
4
12
3
C- 5
5
C- 7
C- 13
C- 11
2
C- 12
C- 9
C- 10
1
Reference photo
6
5 Assembling the Frame 2 & Fuel Tank
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
Indication of Working Methods
Fold or Curve
Glue
photos below to glue the parts together.
Frame2
Fold each relevant part according to the assembly symbols.
Sheet B, 7 parts in total
Please use the
dots on each component as reference when gluing surfaces.
Reference photo
C- 19
C- 20
C- 25
C- 24
C- 21
C- 23
C- 22
Fuel Tank
Reference photo
Sheet D, 2 parts in total
D- 1
D- 2
7
6 Assembling the Under Cowl
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
Fold or Curve
Indication of Working Methods
Glue
photos below to glue the parts together.
Under Cowl
Fold each relevant part according to the assembly symbols.
Sheet E, 13 parts in total
Please use the
Glue in order from 1 to
7
dots on each component as reference when gluing surfaces.
on the graphic.
E- 12
E- 8
E- 6
3
2
1
E- 7
3
E- 10
7
E- 11
2
4
3
4
E- 4
3
E- 9
4
4
E- 3
E- 1
E- 5
7
1
6
5
E- 2
6
6
6
E- 13
8
Reference photo
7 Assembling the Seat Cowl & Taillight
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
Indication of Working Methods
Fold or Curve
Glue
photos below to glue the parts together.
Seat Cowl
Fold each relevant part according to the assembly symbols.
Please use the
Sheet F, 13 parts in total
dots on each component as reference when gluing surfaces.
Reference photo
Glue in order from 1 to 10 on the graphic.
F- 1,2
F- 10
9
F- 11
F- 9
1
2
F- 4
F- 3
3
3
F- 12
8
10
8
4
6
7
8
7
8
5
F- 5
F- 8
8
8
F- 13
F- 6
F- 7
Taillight
Sheet G, 13 parts in total
Glue in order from 1 to
Reference photo
G- 1
8
on the graphic.
6
G- 4
G- 9
G- 7
1
2
G- 5
7
5
7
G- 6
G- 8
G- 2
2
8
G- 3
4
3
3
G- 13
G- 10
G- 11
1
G- 12
9
8 Assembling the Rear Suspension & Rear Arm
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
Indication of Working Methods
Fold or Curve
Glue
photos below to glue the parts together.
Rear Suspension
Sheet C, 12 parts in total
Glue in order from 1 to
Fold each relevant part according to the assembly symbols.
Please use the
6
Reference photo
dots on each component as reference when gluing surfaces.
on the graphic.
H- 1
* Do not paste H-10 & H-11.
H- 2
H- 4
5
H- 11
4
H- 7
H- 6
4
4
3
3
1
6
H- 5
H- 3
H- 8
2
H- 10
H- 9
Rear Arm
I- 14
Reference photo
Sheet I, 15 parts in total
Glue in order from 1 to 13 on the graphic.
I- 15
5
I- 11
I- 9
I- 8
6
8
13
7
12
11
I- 12,13
13
I- 5
I- 10
I- 1
9
I- 7
4
I- 4
10
1
3
2
3
I- 2
10
I- 3
I- 6
10
9 Assembling the Engine
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
Fold or Curve
Indication of Working Methods
Glue
photos below to glue the parts together.
Engine
Sheet J, 34 parts in total
Glue in order from 1 to 23 on the graphic.
J- 10
J- 8
J- 7
8
J- 6
7
J- 9
8
J- 26,27
J- 20,21,22,23,24,25
J- 28
7
J- 5
J- 29
10
J- 19
14
J- 30
11
J- 32
4
12
J- 33
J- 16
13
21
9
22
20
J- 4
9
J- 1
J- 3
3
19
18
6
17
6
15
J- 18
16
J- 34
2
23
J- 2
J- 14
J- 31
J- 12
1
5
J- 17
J- 11
J- 15
11
J- 13
Reference photo
10 Assembling the Radiator & Stand
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
Indication of Working Methods
Fold or Curve
Glue
photos below to glue the parts together.
Radiator
Fold each relevant part according to the assembly symbols.
Please use the
Sheet J, 18 parts in total
dots on each component as reference when gluing surfaces.
Reference photo
J- 44
J- 43
J- 45
J- 42
J- 46
J- 47
J- 50
J- 52
J- 35
J- 51
* Do not paste J-48 & J-49.
J- 36
J- 48
J- 49
J- 37
J- 39
J- 40
J- 38
J- 41
Stand
Reference photo
Sheet K, 10 parts in total
Glue in order from 1 to
5
on the graphic.
* Do not paste K-2 & K-8.
K- 2
K- 8
* Do not paste K-1 & K-7.
K- 7
5
2
K- 1
5
K- 9
K- 4
2
3
1
4
K- 6
K- 10
K- 3
3
4
1
K- 5
12
12 Assembling the Left footrests & Right footrests
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
Indication of Working Methods
Fold or Curve
Glue
photos below to glue the parts together.
Left footrests
Fold each relevant part according to the assembly symbols.
Sheet M, 6 parts in total
Please use the
Glue in order from 1 to
6
dots on each component as reference when gluing surfaces.
Reference photo
on the graphic.
M- 6
M- 1
M- 2
M- 4
M- 5
M- 3
Right footrests
Reference photo
M- 7
Sheet M, 11 parts in total
Glue in order from 1 to 10 on the graphic.
1
M- 15
3
M- 8
M- 14
M- 10
4
2
M- 16
M- 17
M- 13
5
6
10
9
8
M- 9
7
M- 12
M- 11
14
13 Assembling the Front Tire
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
Fold or Curve
Indication of Working Methods
Glue
photos below to glue the parts together.
Front Tire
Fold each relevant part according to the assembly symbols.
Please use the
Sheet N, 17 parts in total
Glue in order from 1 to
5
dots on each component as reference when gluing surfaces.
on the graphic.
2
5
1
N- 14
5
N- 17
3
N- 12
4
N- 8
N- 10
N- 2
N- 16
1
N- 3
N- 15
2
N- 6
3
N- 1
N- 9
N- 11
N- 5
N- 4
N- 7
15
N- 13
Reference photo
14 Assembling the Rear Tire
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
Fold or Curve
Indication of Working Methods
Glue
photos below to glue the parts together.
Rear Tire
Fold each relevant part according to the assembly symbols.
Sheet O, 17 parts in total
Glue in order from 1 to
Please use the
5
dots on each component as reference when gluing surfaces.
on the graphic.
5
2
1
5
O- 17
O- 13
3
O- 11
O- 8
O- 9
O- 10
4
O- 2
O- 16
1
O- 12
O- 15
O- 1
O- 3
2
3
O- 6
O- 7
O- 5
O- 14
O- 4
16
Reference photo
15 Finish
Please use the
Glue the radiator to the engine.
2
Glue the engine to the frame 1.
3
Glue the rear arm to the frame 1.
4
Glue the rear suspension 1 to the frame 1.
5
Glue the rear suspension 2 to the frame 1.
6
Glue the taillight to the seat cowl.
7
Glue the exhaust pipes 3 to the seat cowl.
8
Glue the seat cowl to the frame 2.
9
Glue the tank to the frame 2.
6
Front Cowl
Connect each of the previously assembled parts in
order from 1 - 22 according to the diagram.
1
7
16
Right
footrests
Upper Steering Column
Meter
10
14
Frame 1
10
Glue the frame 2 to the frame 1.
11
Glue the exhaust pipes 1 to the engine.
12
Insert exhaust pipes 2 into exhaust pipes 1 and 3.
13
Put the lower part of the steering through the frame and
glue it to the upper part of the steering.
14
Glue the meter to the frame 1.
15
Glue the under cowl to the frame 1.
16
Glue the front cowl to the under cowl.
17
Glue the brake caliper to the front tire.
18
Glue the front tire to the lower steering column.
19
Glue the front fender to the lower steering column.
20
Glue the rear tire to the rear arm.
21
Glue the left footrests to the frame 1.
22
Glue the right footrests to the frame 1.
22
8
12
Exhaust Pipes3
Exhaust Pipes2
Left
footrests
Rear Suspension1
Rear Tire
4
13
Front Fender
Frame 2
9
10
Lower Steering Column
21
2
Engine
12
2
3
20
16
5
19
1
11
1
11
17
Radiator
17
17
5
Rear Arm
15
18
Front Tire
Brake Caliper
Taillight
Seat Cowl
Fuel Tank
dots on each component as reference when gluing surfaces.
Exhaust
Pipes1
Rear Suspension2
Under Cowl
16 Assembled Model and the List of Parts
Please refer to the photo below when attaching each component.
RIGHT
FRONT
Exhaust Pipes
Seat Cowl
Fuel Tank
Sheet L, 60 parts in total
Sheet F, 13 parts in total
Sheet D, 2 parts in total
Right footrests
Under Cowl
Steering
Front Cowl
Sheet M, 11 parts in total
Sheet E, 13 parts in total
Sheet B, 19 parts in total
Sheet A, 8 parts in total
18
16 Assembled Model and the List of Parts
Please refer to the photo below when attaching each component.
LEFT
REAR
Front Tire
Engine
Rear Tire
Sheet N, 17 parts in total
Sheet J, 34 parts in total
Sheet O, 17 parts in total
Front Fender
Rear Suspension
Left footrests
Taillight
Sheet B, 3 parts in total
Sheet H, 11 parts in total
Sheet M, 6 parts in total
Sheet G, 13 parts in total
19
16 Assembled Model and the List of Parts
Please refer to the photo below when attaching each component.
FRONT
BACK
Frame 1
Frame 2
Meter
Sheet c, 18 parts in total
Sheet c, 7 parts in total
Sheet B, 12 parts in total
Brake Caliper
Radiator
Rear Arm
Sheet B, 6 parts in total
Sheet J, 18 parts in total
Sheet I, 15 parts in total
20