Buick Excelle 1.That is the factory car entertainment outlook 2.Before

Buick Excelle
1.That is the factory car entertainment outlook
2.Before removing the console panel, remove the steel wire behind the air-condition swicther
3.Use special tool to prize the console panel along the gap from the left side
4.Prize up the console panel
5.Pull out the console panel and then remove the climate control cable behind the panel
6.Seen from the profile, it is more forward-straight
7.After pulling out the console panel, the factory unit appears in front of the us.
8.Remove the factory unit fixing screws.
9.Pull out of the factory head unit
10.Remove the factory head unit connection cable
11.The console dashboard outlook after removing the factory head unit and the console pan
el
12.Take out the FLYAUDIO special unit for Excelle
13.Remove the holders from the two sides of the factory unit
14.Fit the factory holders at the two sides of FLYAUDIO unit
15.Connect the radio cable, IPOD cable and GPS antenna cable to the head unit
16.After all the cables connected, put the head unit into the housing.
17.Fix the head unit
18.Restart the head unit to check the whether the connection cables are right or not
19.“Notes” interface is precaution for the driver while driving
20.Select the “setup” in the main interface to switch to the setup interface, “brake inspectio
n” and “light inspection” functions etc. can be setup in this interface.
21.Demo driving in the GPS navigation interface
22.Put the console panel back when test is OK
23.Connect the light alert cable behind the panel
24.Connect the climate control cable
25.Close the panel and the console board
26.Connect the steel cable behind the climate switch
27.Restart the head unit, and select the “NAVI” button switch to the GPS navigation
28.Select the “DVD” in the main menu to the DVD operation menu
29.Automatic screen activation for reverse camera when shifted to reverse gear
30.The in-car effect after installation