Roll formers for standing seam Type 1

Roll formers for standing seam Type 1
5
Electric roll formers PROBAC
Designed to realize the profile type 1 for parallel
as well as conical trays, either in a workshop or
on a building site
•Hand wheels are equipped
with counter to adjust profile
and tray’s width 3a and 3b
•4 wheels equipped with brakes 4
•4 slinging rings 5
3a
Transversal cut, total or partial, for the recovery the sheet
cut-off after slitting process 1 , see below
6
4
Full cut
Part cut
1
60 to1770 mm
2
Cutt-off
2
175 to 805 mm
80 to 770 mm
Adjustable longitudinal cut for slitting and roll-forming simultaneously 2
175 to 805 mm
One side
60 to 770 mm
20
9
175 to 805 mm
80 to 770 mm
11,5
Other possibilities
11,5 • in 2 ways
26
9
9
25
11,5
9
26
11,5
• 1 way 260 to 850 mm
• 2 ways 140 to 850 mm
80
to 770
80 60
to 770
mmmm
Conical tray 175 to 805 mm
805 mm
175 to175
805tomm
Optional accessories (for PROBAC-BA,
HT and HT-CE)
20
9
9
24,5
• Beading rolls at the bottom of the tray (2 x 20 x 1,5 mm) PROBAC-HT-NERV
• Two link-arms for decoiler DVS1000 (PROBAC-DVS)
24,5
11,5
9
80 to 770 mm
11,5
175 to 805 mm
5
9
9
9
26
26
9
9
20
9
25
25
Beading rolls
24,5
9
Width of the coil to be
profiled
9
26
11,5
9
9
26
20
25
9
9
(tray’s root: 60 to 180mm 2 passages)
25
9
9
24,5
Both sides
o 805 mm
25
3b
PROBAC-BA
• Integrated in-feeding process
• Transverse total or partial cuts enables to recover the sheet cut-off after the slitting process
• Slitting with or without roll forming
• Profile and coil width adjustment operated by 2 wheels with counters
• Length programming (accuracy ± 3 cm)
• 7 sets of rolls for a high roll forming quality
• Metal sheet guiding process designed to form conical tray (1 side after another)
• Speed 10 m/min
PROBAC-HT
Identical features as PROBAC-BA, with in addition:
• Precise length programming with engine equipped with brake and
variable transmission to provide ± 3 mm accuracy
• Speed max 15 m/min
• Trays counter with automatic reset
• Manual/auto mode
• Length totalisator
• Maintenance menu
• Slow speed mode for side by side profiling
PROBAC-HT and PROBAC-HT-CE
programmer
PROBAC-HT-CE
Identical features as PROBAC-HT, but in addition includes
• Transverse electric cut
Features
Weight (kg)
Dimensions (mm)
Capacity Zinc, copper, Alu (mm)
Power supply (V)
Motor power (kW)
Speed (m/min)
Length programming
Tray minimum length (mm)
Slinging rings
PROBAC-BA
PROBAC-HT
PROBAC-HT-CE
504
1 600 x 1 380 x 1 000
0,8
220 1Ph.- 20 A
1,5
10
accuracy ± 30 mm
400
4
510
1 600 x 1 380 x 1 000
0,8
220 1Ph.- 20 A
1,5
15
accuracy ± 3 mm
400
4
534
1 600 x 1 380 x 1 000
0,8
220 1Ph.- 20 A
1,5
15
accuracy ± 3 mm
400
4
PROBAC-HT with decoiler
DVS1000 and the option
two link-arms
Roll former for standing seam type 1
9
11,5
175 PROBAC-LT
to 805 mm
Electric roll formers
and PROBAC-LT-C
PROBAC-LT-C
256
1 200 x 1 300 x 1 050
0,8
220 1 Ph. 20 A
1,1
9 11,5
400
4
360
1 500 x 1 300 x 1 050
0,8
220 1 Ph. 20 A
1,1
9
400
4
9
PROBAC-LT
26
9
9
Weight (kg)
Dimensions (mm)
Capacity Zinc, copper, Alu (mm)
Power supply (V) 9
Motor power (kW)
Speed (m/min)
Tray minimum length (mm)
Slinging rings
25
20
26
24,5
25
Features
The PROBAC- LT-C is fitted with a cutter at the
front of the machine to reduce waste, and
rubber feed rollers to ensure an accurate
profiling as the sheet enters and
exits, during and after cutting.
By simple adjustment, these
machines are capable to
duplicate the same profile
on both sides of the panel;
the widths of panels can
be adjusted by the hand wheel on the side
of the machine and can provide a minimum
width of panel from 80 to 770 mm.
The powerful 220 or 110 Volt motor can pull
200 kg coils without assistance.
Easily accessible emergency stop.
PROBAC-LT-C
Options
• Length control device (± 20 mm accuracy) PROBAC-LGPRO
• 110 V - 1 phase motor
Electric seamer
Seamer
Seamer SER100A-05 for standing seam type 1
Optional accessories:
• Cutting device SER-05GALDEC
• Winter heating device SER-05SETHIVER
• 12 m cable control command SER-05TELECDE
• Automatic cut-off system SER-05SWITCH
9
9
26
60 to 770 mm
26
25
25
11,5
175 to 805 mm
80 to 770 mm
The roll formers PROBAC-LT and LT-C are designed for
9
standing seam profiling. Both machines
work with the same
sets of rollers that are fitted to the PROBAC BA and HT
(7 sets). The PROBAC-LT and LT-C have a light, but robust
11,5
frame to facilitate transportation to and from the building
site, it also has two detachable handles which enables the
machine to be portable similar to the wheelbarrow design.
9
The feed arms can be easily folded
to avoid damage during
transportation. There are 4 sling rings which make possible
the PROBAC LT to be hoisted on and off any vehicle, with
11,5
ease.
9
20
24,
9
Features
Weight (kg)
Mini radius for curved roofing (mm)
Speed (m/min)
Power supply (V)
Capacity zinc, copper, alu / Stainless-steel (mm)
Assembly mini length (mm)
Minimum operating temperature
22
2 000
from 5,5 to 13 m/min
220 1 Ph.
0,8 / 0,55
140
mini 10°C (without
winter set)
11,5
Arch-folding machine
Arch-folding machine RCBPRO
New design generation of folding machine for standing seam
• Equipped with 2 motors with independent variable speed adjustment
• Control by switch or by pedal to let hands free
• Forward/backward running, step by step, continuous use
Features
RCBPRO
Weight (kg)
375
Mini radius, depending material, thickness and pass (mm)
350 - 800
Dimensions (mm)
800 x 800 x 1 500
Power supply (V)
220 1-Ph.
Capacity mini-maxi zinc, copper, alu (mm)
0,6-0,8
Special roll former for flashing - roofing - facade
Special roll formers PRB
Design on special request for thin metal, soft steel, zinc,
copper, aluminium for:
• Roofing
• Facades
• Insulation
• Ceiling
• Sandwich panels
• Rainwater systems
Jouanel Industrie S.A. | Z.A. des Saulniers | 37800 Sainte-Maure-de-Touraine | France
Tel. : +33 247.654.067 - Fax : +33 247.655.161 | [email protected] | www.jouanel.com
With the aim to keep on improving its machinery, Jouanel reserves its right to modify machinery features at any time.
Jouanel Industrie S.A. | 10 2013
The roll former can be assembled with 1,2 or 3 sets of rolls
to produce different shapes on the same machine.