Océ TDS450 - A/E Graphics, Inc.

Océ Maintenance Card
Océ TDS450
o
Display
‘Previous’ key
previous
Navigation keys
‘Next/Select’ key
next/select
‘Stop’ key
‘On-line’ key
on-line
stop
Load roll 1
1
2
2
1
1
3
1
2
1. Open the drawer. Remove the roll holder.
2. Press the green knob to replace the
media roll. Load the media roll.
3. Feed the media up to the rollers. Turn the
rollers to feed the media up to the green
arrow. Close the drawer.
Load roll 2
3
1
2
2
1
1. Open the flap. Remove the roll holder.
2. Press the green knob to replace the
media roll. Load the media roll.
3. Feed the media up to the rollers. Turn the
rollers to feed the media up to the green
arrow. Close the drawer.
Add toner
2
1
1
2
1. Open the left cover. Before you open the
toner bottle, shake the bottle.
2. Fasten the bottle. Turn the bottle into
the upright position. When empty, return
the bottle into the original position.
Remove the bottle.
3. Replace the waste toner bag.
Close the left cover.
2. Do not damage the sensor.
3. Clean the scan area with a lint-free cloth
and Océ cleaner A. Dry the scan area with
another lint-free cloth.
Clean scan area
1. Open the top cover.
GB
www.oce.com