Wera Torque Screwdriver Catalog - Flexible Assembly Systems Inc.

Transcription

242
Series 7400
246
Series Torque-indicators
252
Torque Tools
07
Torque Tools
243
Have you ever over or under
tightened screws?
Wera torque tools permit torque-controlled tightening to prevent damage to screws or work
pieces and to guarantee the safety of the screw connection. This makes labour-intensive
drilling, re-tapping and production downtimes a thing of the past.
All Wera torque tools are supplied with a calibration certificate. Our workshop offers a full
service for all Wera torque tools. Please contact us with any queries regarding our service,
recalibration or repairs at 1-800-267-5541.
Adjustable torque screwdrivers
Torque can be set to the required
scale value by hand without special
tools, please see pages 246 - 249.
244
Pre-set adjustable torque
screwdrivers
With pre-set torque, adjustable within
a defined range, please see pages
250 - 251.
Torque Tools
Torque-indicators
For applications requiring
non-adjustable and tamper-proof
torque settings, please see pages
252 - 255.
245
Adjustable Kraftform Torque Screwdrivers
Wera’s adjustable torque screwdrivers can be adjusted in fine increments and guarantee
proven quality and an ergonomic design for the benefit of the user.
Easy torque adjustment without
special tools.
Easy-to-read scale value with touch
indicators for scale increments.
Rapidaptor technology for rapid bit
changes.
Unlimited loosening torque to loosen
seized screws.
All Wera torque tools are supplied with a calibration certificate. Our workshop offers a full service
for all Wera torque tools. Please contact us with any queries regarding our service, recalibration
or repairs at 1-800-267-5541.
246
Measurement accuracy is ± 6% in
accordance with standard EN ISO
6789.
The multi-component Kraftform
handle with hard and soft zones for
high-speed action protects the hand
and is more comfortable during
intensive use.
Series 7400 Kraftform Torque Screwdrivers
With variable torque adjustment.
Series 7400 Kraftform adjustable torque screwdrivers
with Rapidaptor quick-release chuck
Series 7400 Kraftform adjustable torque screwdrivers
with Rapidaptor quick-release chuck
Application: Suitable for 1/4“ DIN 3126-C 6,3 und E 6,3 (ISO 1173)
hexagon insert bits and Wera Series 1 and 4
Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all,
Design:
and single-hand technology
±6 % (EN ISO 6789)
Accuracy:
Kraftform, with anti-roll protection, multi-component
Handle:
Design:
±6 % (EN ISO 6789)
Accuracy:
Handle:
Code
Art.No.
in. lbs.
mm
155
6“
1
05074710002
7445
1
/4“
2.5-11.5
0.5
155
6“
1
/4“
1.2-3.0
0.10
155
6“
1
05074711002
7446
1
/4“
11.0-29.0
1.0
155
6“
1
1
mm
7441
Nm
0.05
05074701003
Nm
1
0.3-1.2
7440
/4“
05074700003
Code
Art.No.
in. lbs.
Series 7400 Kraftform pistol handle, adjustable torque
screwdrivers with Rapidaptor quick-release chuck
Series 7400 Kraftform pistol handle, adjustable torque
Design:
±6 % (EN ISO 6789)
Accuracy:
Kraftform, pistol handle, multi-component
Handle:
Application:
Code
05074702003
?
Art.No.
7442
/4“
1
Nm
Nm
mm
mm
3.0-6.0
0.25
150
100
Code
6“
4“
1
05074712002
Art.No.
7447
in. lbs. in. lbs.
1
/4“
25.0-55.0
2.5
mm
mm
150
100
6“
4“
Why does Wera make
adjustable torque screwdrivers?
When it comes to assembly and maintenance work many screws
have to be tightened with controlled torque to guarantee the safety
of the screw connection and/or prevent damage to the screw or the
work piece. Wera’s adjustable torque screwdrivers are the perfect
tools for these applications. They feature a torque range between
0.3 Nm and 8.8 Nm, two different handles, measurement accuracy
of ± 6% and Rapidaptor technology for rapid bit changes.
247
Torque Tools
Suitable for 1/4“ DIN 3126-C 6,3 und E 6,3 (ISO 1173)
Construction: Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all,
±6 % (EN ISO 6789)
Accuracy:
Handle:
1
With variable torque adjustment.
Series 7400 Kraftform ESD adjustable torque
Rapidaptor
Application: Suitable for 1/4“ DIN 3126 C 6,3 and E 6,3 (ISO 1173) hexagon
insert bits und Wera Series 1 and 4
Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all, and
Design:
single-hand technology
±6 % (EN ISO 6789)
Accuracy:
Handle:
Code
Art.No.
155
6“
1
/4“
1.2-3.0
0.10
155
6“
1
1
mm
7441 ESD
Nm
0.05
05074731002
Nm
1
0.3-1.2
7440 ESD
/4“
05074730002
Series 7400 Kraftform ESD adjustable torque
Application: Suitable for 1/4“ DIN 3126 C 6,3 and E 6,3 (ISO 1173) hexagon
insert bits und Wera Series 1 and 4
Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all, and
Design:
single-hand technology
±6 % (EN ISO 6789)
Accuracy:
Handle:
Code
Art.No.
in. lbs.
155
6“
1
11.0-29.0
1.0
155
6“
1
1
/4“
7446 ESD
mm
0.5
05074734002
in. lbs.
1
2.5-11.5
7445 ESD
/4“
05074733002
Rapid-in und self-lock
The bit can be pushed into the
adaptor without moving the sleeve.
The lock is activated automatically
as soon as the bit is applied to the
screw. Bits are held securely and
wobble-free.
Rapid-out
Simply push the sleeve forward to
change the bit. The spring mechanism lifts the bit off the magnet and
unlocks the tool.
The bit can be easily removed. The
rapid-out function makes it easy to
remove even the smallest bits
without extra tools.
Chuck-all
The Rapidaptor quick-release chucks
hold 1/4” DIN 3126-C 6,3 and E 6,3
as well as Wera series 1 and 4 bits.
Single-hand function
Every function of the Rapidator
quick-release chuck, such as
inserting or releasing bits, can be
carried out with one hand.
This is faster, more economical and
more ergonomic. There are
no unnecessary manoeuvres.
248
7440/41 Kraftform Torque screwdriver set 0.3-3.0 Nm
Code
7400
840/1 Z HexPlus
867/1 TZ
TORX®
867/1 Z IP
TORX PLUS®
1 x 7440; 1 x 7441
1 x 2.0x25; 1 x 2.5x25; 1 x 3.0x25;
1 x 4.0x25; 1 x 5.0x25; 1 x 6.0x25
1 x TX 6x25; 1 x TX 7x25; 1 x TX 8x25;
1 x TX 9x25; 1 x TX 10x25; 1 x TX 15x25;
1 x TX 20x25; 1 x TX 25x25; 1 x TX 30x25
1 x 6 IPx25; 1 x 7 IPx25; 1 x 8 IPx25;
1 x 9 IPx25; 1 x 10 IPx25; 1 x 15 IPx25;
1 x 20 IPx25; 1 x 25 IPx25; 1 x 30 IPx25
1
05074739002
7400
7400 Pistole
840/1 Z HexPlus
867/1 TZ
TORX®
867/1 Z IP
TORX PLUS®
1 x 7440; 1 x 7441
1 x 7442
1 x 2.0x25; 1 x 2.5x25; 1 x 3.0x25;
1 x 4.0x25; 1 x 5.0x25; 1 x 6.0x25
1 x TX 6x25; 1 x TX 7x25; 1 x TX 8x25;
1 x TX 9x25; 1 x TX 10x25; 1 x TX 15x25;
1 x TX 20x25; 1 x TX 25x25; 1 x TX 30x25
1 x 6 IPx25; 1 x 7 IPx25; 1 x 8 IPx25;
1 x 9 IPx25; 1 x 10 IPx25; 1 x 15 IPx25;
1 x 20 IPx25; 1 x 25 IPx25; 1 x 30 IPx25
1
7442/6 Installation set for tyre pressure control systems
Torque Tools
Code
05074738002
7440/41/42 Kraftform Torque screwdriver set 0.3-6.0 Nm
Code
05074737002
327
7400 Pistole
790 A/50
867/1 Z
TORX®
870/1
1
1 x 32
1 x 7443
1 x 11.0; 1 x 12.0
1 x TX 20x25
1 x 1/4“x25
249
Pre-set adjustable Kraftform
Torque Screwdrivers
The tools are ideal for applications that require consistently accurate, repeatable torque.
The torque value can be changed within the available torque range. Remove the cap at the
top of the handle and adjust the setting nut with a nutspinner.
Pre-set values can be changed with a
nutspinner. Measurement accuracy is
± 6% in accordance with standard EN
ISO 6789.
Rapidaptor technology for rapid bit
changes.
seized screws.
or repairs at 1-800-267-5541.
250
intensive use.
With pre-set adjustable torque.
Serie 7400 Kraftform pre-set adjustable torque
Series 7400 Kraftform pre-set adjustable torque
Application:
Application:
Design:
Pre-set torque: 0.3 Nm, 1.2 Nm
± 6% (EN ISO 6789)
Accuracy:
Handle:
Code
Art.No.
Design:
Pre-set torque: 2.5 in.lbs., 11.0 in.lbs.
±6 % (EN ISO 6789)
Accuracy:
Handle:
1
05074720002
1)
7465
1
/4“
2.5
2.5-11.5
155
6“
1
/4“
1.2
1.2-3.0
155
6“
1
05074722002
1)
7466
1
/4“
11.0
11.0-29.0
155
6“
1
1
mm
6“
7461
in. lbs.
155
1)
mm
05074716004
Nm
0.3-1.2
1
0.3
7460
Nm
1)
/4“
05074715004
Code
Art.No.
in. lbs.
Series 7400 Kraftform pistol handle, pre-set adjustable
torque screwdriver
Application:
Application:
Design:
Pre-set torque: 3.0 Nm
±6 % (EN ISO 6789)
Accuracy:
Handle:
Code
05074717004
1)
Art.No.
1)
7462
/4“
1
Nm
Nm
mm
mm
3.0
3.0-6.0
150
100
Other pre-set values within the adjustable range can be delivered on request
Design:
Pre-set torque: 25.0 in. lbs.
±6 % (EN ISO 6789)
Accuracy:
Handle:
Code
6“
4“
Torque Tools
Series 7400 Kraftform pistol handle, pre-set adjustable
torque screwdriver
1
05074721002
Art.No.
1)
7467
in. lbs. in. lbs.
1
/4“
25.0
mm
mm
25.0-55.0 150
100
6“
4“
251
1
Kraftform Torque-indicators
Wera Torque-indicators have been factory pre-set to torque values recommended by leading
carbide tool manufacturers. Tightening values are precisely related to the size of the TORX®,
TORX PLUS® or hexagon socket screw. Torque-indicators ensure safe and easily loosened
screw connections.
Torque precisely adjusted to the size
of the TORX®, TORX PLUS® or
hexagon socket screw.
Thin 4-mm hexagon blades to reach
screws in difficult-to-access places.
seized screws.
or repairs at 1-800-267-5541.
252
Non-adjustable and tamper-proof.
intensive use.
With pre-set torque.
300 Hex Torque-indicator
300 TX Torque-indicator TORX®
Application:
Pre-set torque:
Blade:
Design:
Handle:
Application:
Pre-set torque:
Blade:
Design:
Handle:
For hexagon socket screws
1.4 Nm-3.0 Nm (1.0 ft.lb.-2.2 ft.lb.), fixed presets
Hexagonal, 4 mm, reduced diameter tip
Hex-Plus, Black Point
Kraftform with anti-roll protection, multi-component
For TORX®-socket screws
Black Point
Nm
ft. lb.
mm
mm
mm
mm
Nm
ft. lb.
mm
mm
mm
mm
05027910003
2.0
1.4
1.0
4
3.5
65
105
2 9/16“
1
05027930004
TX 6
0.6
0.4
4
3.5
65
105
2 9/16“
1
05027911003
2.5
2.0
1.5
4
3.8
65
105
2 9/16“
1
05027931004
TX 7
0.9
0.7
4
3.5
65
105
2 9/16“
1
05027912003
3.0
3.0
2.2
4
3.8
65
105
2 9/16“
1
05027932004
TX 8
1.2
0.9
4
3.5
65
105
2 9/16“
1
05027933004
TX 9
1.4
1.0
4
3.5
65
105
2 /16“
1
05027934004
TX 10
2.0
1.5
4
3.8
65
105
2 9/16“
1
05027935004
TX 15
3.0
2.2
4
3.8
65
105
2 9/16“
1
1“
1
Code
Code
300 Hex Torque-indicator, pistol handle
9
300 TX Torque-indicator TORX®, pistol handle
For hexagon socket screws
5.0 Nm (3.7 ft. lb.), fixed preset
Hex-Plus, Black Point
Kraftform pistol handle, multi-component
Code
05027913003
4.0
mm
mm
mm
160
100
65
Application:
Pre-set torque:
Blade:
Design:
Handle:
mm
2 9/16“
25
1“
Black Point
Torque Tools
Application:
Pre-set torque:
Blade:
Design:
Handle:
1
Code
05027936003
TX 20
mm
mm
mm
160
100
65
mm
2 9/16“
25
Less is often more
Some screw connections require specific torque values so that they
can be tightened or loosened easily. Wera torque-indicators are
pre-set to torque values recommended by leading carbide tool
manufacturers. Pre-set torque between 0.6 Nm and 5.0 Nm, for
TORX®, TORX PLUS® and hexagon socket screws, unlimited
loosening torque, two handles, tamper-proof.
253
With pre-set torque.
300 IP Torque-indicator TORX PLUS®
Application:
Pre-set torque:
Blade:
Design:
Handle:
For TORX PLUS®-socket screws
Black Point
Nm
ft. lb.
mm
mm
mm
mm
05028040003
Code
6 IP
0.6
0.4
4
3.5
65
105
2 9/16“
1
05028041003
7 IP
0.9
0.7
4
3.5
65
105
2 9/16“
1
05028042003
8 IP
1.2
0.9
4
3.5
65
105
2 9/16“
1
05028043003
9 IP
1.4
1.0
4
3.5
65
105
2 /16“
1
05028044003
10 IP
2.0
1.5
4
3.8
65
105
2 9/16“
1
05028045003
15 IP
3.0
2.2
4
3.8
65
105
2 9/16“
1
9
300 IP Torque-indicator TORX PLUS®, pistol handle
Application:
Pre-set torque:
Blade:
Design:
Handle:
Black Point
Code
05028046003
254
20 IP
mm
mm
mm
160
100
65
mm
2 9/16“
25
1“
1
300 TX/6 Torque-indicator set TORX®
300 IP/6 Torque-indicator set TORX PLUS®
6 pieces
Application:
Pre-set torque: 0.6 Nm/0.4 ft.lb. (TX 6); 0.9 Nm/0.7 ft.lb. (TX 7);
1.2 Nm/0.9 ft.lb (TX 8); 1.4 Nm/1.0 ft.lb (TX 9);
2.0 Nm/1.5 ft.lb (TX 10); 3.0/2.2 ft.lb (TX 15)
Blade:
Black Point
Design:
Handle:
6 pieces
Application:
Pre-set torque: 0.6 Nm/0.4 ft.lb. (TX 6); 0.9 Nm/0.7 ft.lb. (TX 7);
1.2 Nm/0.9 ft.lb (TX 8); 1.4 Nm/1.0 ft.lb (TX 9);
2.0 Nm/1.5 ft.lb (TX 10); 3.0/2.2 ft.lb (TX 15)
Blade:
Black Point
Design:
Handle:
Code
300 TX
1 x TX 6x65; 1 x TX 7x65; 1 x TX 8x65;
1 x TX 9x65; 1 x TX 10x65; 1 x TX 15x65
1
05027941002
300 IP
1
1 x 6 IPx65; 1 x 7 IPx65; 1 x 8 IPx65;
1 x 9 IPx65; 1 x 10 IPx65; 1 x 15 IPx65
Torque Tools
Code
05027940002
255

Wera Torque Screwdriver Catalog - Flexible Assembly Systems Inc.

Transcription

Similar documents

Torque Tools for controlled tightening

Der Wera Katalog Werkzeuge für bessere Arbeitsergebnisse.

Actuator range

PPU catalogue web