Strahman Valves, Inc.

Transcription

Strahman Valves, Inc.
Strahman Valves, Inc. has been dedicated to excellence since 1921, both in the
reliability of our products and in the responsiveness of our customer service. Our
experience making high quality, durable and long-lasting products at competitive
prices have made us world renown in design and manufacturing; this has been
the key to Strahman’s success for more than eighty years.
Table of Contents
2004
New
New Products
Products
VISIT
VISIT US
US ON
ON THE
THE WEB
WEB AT:
AT:
www.strahmanvalves.com
Page
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
M-5000/M-5700 Unit (Wall-Mounted), Flow Chart . . . . . . . . . . . . . . . . . . . . 2-3
M-5000/M-5700 Unit (Recessed-Pedestal). . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
M-159TM - M-750TM (Wall-Mounted) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
M-159TM - M-750TM (Recessed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9
M-159TM - M-750TM (Pedestal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11
Flow Chart, M-159TM - M-750TM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
CEC-1000 - Completely Enclosed Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
M-120 / M-156N / M-756 (Wall-Mounted) . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15
M-156N / M-756 (Recessed-Pedestal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17
M-5000-TS -Thermostatically (Steam & Cold Water) Controlled Unit 18-19
M-200-TS -Thermostatically (Hot & Cold water) Controlled Unit. . . . . 20-21
Hose Assemblies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-24
Hose Reels (Carbon Steel/Stainless Steel). . . . . . . . . . . . . . . . . . . . . . . . . . 25-26
Nozzles (See “New” P-70, Mini M-70) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-30
Nozzle Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Hose Adapters/Swivel Adapter/Swivel-Pro/Super Swivel-Pro . . . . . . . 32-33
Service Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
3/4” Control Valves / Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
3/4” Valve Conversion Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Auto/Manual Steam Traps /MP-88 Mounting Plate . . . . . . . . . . . . . . . . . . . . 37
HR-100/HR-100 (L) Hose Racks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
“Strahman makes the best products in the world.
You can’t beat the quality, durability or reliability
of these products.”
Ed, Maintenance Supervisor, Microbrewery
STRAHMAN VALVES, INC.
3 Vreeland Rd. Florham Park, NJ 07932 USA
Tel 973-377-4900 Toll Free 877-STRAHMAN
Fax 973-377-8288 www.strahmanvalves.com
Mixing Units-Hose Stations
Strahman began providing the dairy and food processing industries with durable, reliable mixing units and hose stations
more than eight decades ago. Today, these sturdy pieces of equipment can be found in many manufacturing plants and
processing industries, including food, beverage, pharmaceutical and others, where fast and effective cleanup is necessary.
As a single unit, Strahman’s mixing unit-hose stations produce wash water from the following sources:
• Instant hot water from steam and cold water (M-5000/M-5700 Series)
• Blended hot and cold water (M-159/M-750 Series)
• Hot or cold water (M-156N/M-756/M-758/M-358 Series)
Standard Strahman mixing units are constructed from bronze with internal parts of stainless steel. Most models are also
available chrome-plated or made entirely of stainless steel. Stainless steel mixing units and hose stations will not discolor,
are easy to clean and are ideal for use in special water applications, including those using ionized or purified water.
Strahman makes mixing units in four practical types
to meet your particular needs:
• Wall-Mounted
• Recessed
• Pedestal
• Cabinet
Most Strahman mixing units-hose stations come with
a temperature-indicating gauge as an option. Temperatureindicating units include an accurate dial-type gauge that
displays, in both Celsius and Fahrenheit, the wash water’s
exact temperature; users can easily adjust the temperature by
turning the unit’s valves.
Most Strahman mixing units come standard with:
• Stainless steel hose rack
• 50 feet of high pressure water hose
• Automatic, water saver spray nozzle
• Check valves to prevent pressure from backing up in the steam and
water lines if a kink develops or the hose becomes clogged
All Strahman units are exceptionally durable, economical, require little
maintenance and mount easily anywhere steam and/or water lines are available.
• Maximum recommended operating temperature for Strahman
mixing units-hose stations, and all Strahman products: 200˚F/93˚C
• Maximum working pressure: 150 psi
Several hose lengths, hose types and nozzle options are
available. Most mixing units are available with globe or angle
valves. Consult your Strahman sales representative for details.
Unit Shown: M-5000
chrome plated
Note: Also available with ball valves.
“The Strahman equipment really holds up. The products do not have to be replaced often,
which helps with our budgeting. The customer service is great, too. Mainly, the equipment
holds up. It’s strong... you install it and forget it. For plant engineers that’s great, because
you don’t have to worry about purchasing new equipment each year.”
Ron, Director of Safety, Dairy
1
Steam and Cold Water Wall Mounted
M-5000* and M-5700 (All Stainless Steel)
Wall Mounted Series for Steam and Cold Water
These units produce hot water instantly from a steady supply of steam and cold water. All mixing units-hose stations
in the M-5000/M-5700 series are equipped with a dial-type gauge that indicates the wash water’s exact temperature.
Users can easily regulate the temperature by turning the unit’s steam and cold water valves. As an added safety
measure, these units shut off their steam source automatically if the cold water supply falls below 50 psi for any
reason. This prevents hazardous steam from exiting the unit and causing steam burns.
Please review the chart below before purchasing an M-5000/M-5700 unit
REQUIRED STEAM
MODEL NUMBER
M-5000 L▲▲
M-5000 M
M-5000 H
REQUIRED STEAM
PRESSURE▲
80-95 LBS.
96-130 LBS.
131-150 LBS.
REQUIRED WATER
PRESSURE▲
50-80 LBS.
50-80 LBS.
50-80 LBS.
GPM
5-7
4 1/2 - 6
4 1/2 - 6
*The M-5000 unit is available in bronze or bronze chrome-plated material.
Standard unit supplied.
▲▲
▲
Required at installation site to ensure proper operation of mixing unit.
Unit Shown:
M-5700 unit complete
Wall-Mounted Series for Steam and Cold Water
Strahman’s wall-mounted, temperature-indicating, instant hot water mixing unit is designed
to mount one inch away from the walls for easy cleanup. Units come complete with spacers,
complete mounting instructions and 3/8-inch studs for easy mounting.
• Maximum recommended operating temperature: 200˚F/93˚C
PARTS LIST
Part No.
1
2
3
4
5
6
7
8
10
11
12
13†
18
19
20
21
22
25
26
27
28
29
30
31**
32
33
34
35
36*
Part
Body (includes Parts 6 and 7)
Hose Rack Cap Screw (not shown)
Hose Rack Lock Washer (not shown)
Hose Rack Connector (not shown)
Steam Poppet (L, M, H)
Steam Jet
Poppet Seat
Hose Rack (not shown)
Spacer (not shown)
Wall Plate (not shown)
Ball Check Union Nut
Ball Check Valves (includes Part 36)
Water Chamber
Water Chamber Housing (includes Part 35)
Poppet Guide
Poppet Guide Nut
Body Nut
Set Screw
Poppet Spring
Guide Extension
Pusher
Grommet
Gauge Holder
Temp Gauge
Blending Chamber
Grommet Lock Screw
Lock Screw Holder
“O” Sealing Ring for Water Chamber Housing
Ball Check Gasket
M-5000 Material
Bronze
Stainless Steel
Stainless Steel
Brass
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Brass
Brass
Brass/Stainless Steel Aluminum Silicone Bronze
Stainless Steel
Brass
Brass
Brass
Bronze
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Rubber
Bronze
Chrome
Bronze
Stainless Steel
Stainless Steel
E5 15-80-2Q75
Copper, Teflon® Coated
M-5700 Material
SST 316
SST 304
SST 410
SST 303
SST 303
SST 416
SST 304
SST 302
SST 416
SST 304
SST 304
SST 303
SST 303
SST 304
SST 304
SST 303
SST 303
SST 304
SST 302
SST 416
SST 303
Rubber
SST 304
Plated Brass
SST 303
SST 303
SST 304
EPMD
Graphite
Adjustable Needle **
Sold as a complete unit. See page 35 for control valve parts. Contact Strahman for service bulletin.
* Teflon® is a registered trademark of E. I. DuPont de Nemours and Company.
* *Temperature gauge: 40-120˚C/100-250˚F.
†
2
CAUTION:
If overheating of water should occur due to restrictions
in lines or pressure fluctuations, make adjustment to
steam valve to lower temperature.
M-5000 (Bronze*) Wall-Mounted/M-5700 (Stainless Steel) Wall-Mounted Dimensions
**
**See page 2 for temperature ranges
Note: Front view shown with Globe Valves.
*Available : bronze chrome plated
WATER PRESSURE PSIG
STRAHMAN STEAM-WATER MIXER M5000 / M5700 SERIES
*Minimum pressures shown in heavy black line.
HOW TO READ CHART: To get GPM flow from the unit use (water pressure P.S.I.G.) indication above. From 50 PSIG water go to first curve and move to bottom of the chart which shows (GPM).
This would indicate that the flow would be 7 GPM.
To get the temperature of water through the unit 50 PSIG water pressure and move to 80 PSIG steam pressure where the lines intersect move to bottom of chart (temperature rise F). This
would indicate that the temperature rise would be 112° F. Add to this the inlet water temperature and this would indicate the temperature of hot water you may expect to get from the unit.
To read the temperature rise correction chart use the inlet water temperature (50) move to bottom of chart and compute (.98). Multiply this times the temperature rise F as shown above.
MP-88 stainless steel mounting plate is standard on M-5700 and optional on M-5000. Refer to page 31.
NOTE: To ensure proper performance, we recommend
that a standard Strahman Hose Assembly be used
with these products.
3
Steam and Cold Water Recessed and Pedestal
M-5000 and M-5700 (All Stainless Steel)
Recessed/Pedestal Series for Steam and Cold Water
Recessed Series for Steam and Cold Water
Strahman’s recessed, temperature-indicating, instant hot water makers are designed
to conceal mixing unit piping in a stainless steel box for recessed wall mounting.
All exposed parts are either bronze chrome-plated or stainless steel depending on
the selected unit.
These units are ideal for new construction or other places where concealed
piping and good looks are desirable.
Note: When Ordering, specify angle valves (back entry)
or globe valves (top entry).
Unit Shown:
Recessed M-5000
with Strahman
Hose Assembly A
in Red
Pedestal Series for Steam and Cold Water
Strahman’s pedestal-type, temperature-indicating, instant hot water makers
can be mounted anywhere floor piping is available. The pedestal tube, head
and cover are ruggedly constructed of stainless steel, while the mixing unit
is bronze chrome-plated or stainless steel, making it ideal where efficiency
and good looks are desired.
Unit Shown:
Pedestal M-5000
chrome plated
with Strahman Hose
Assembly Y (yellow)
with Hydro-Pro 150 ®
spray nozzle
4
CAUTION:
If overheating of water should occur due to restrictions
in lines or pressure fluctuations, make adjustment to
M-5000 (Bronze/Chrome) Recessed/M-5700 (All Stainless Steel) Recessed Dimensions
(Recessed Box Standard Stainless Steel)
M-5000 (Bronze/Chrome) Pedestal/M-5700 (All Stainless Steel) Pedestal Dimensions
(Pedestal Head, Tube and Base Standard Stainless Steel)
*
Contact Strahman for service bulletin.
* Temperature Gauge: 40-120˚C
100-250˚F
Note: Refer to Page 2 for Spare Parts List.
5
Hot and Cold Water Wall-Mounted
M-159* and M-750 (All Stainless Steel) Wall Mounted Series
M-159TM and M-750TM (All Stainless Steel)Wall Mounted Series
Strahman’s mixing units-hose stations for hot and cold water are designed to thoroughly mix hot and cold water
in any desired proportion. They’re available in both standard models (M-159) and models made completely of stainless
steel (M-750). All exposed parts are either bronze chrome plated or stainless steel depending on the unit selected.
Our Temperature Indicating (TM) models (M-159TM & M-750TM) are equipped with a dial-type gauge that accurately
indicates the wash water’s temperature. They also feature a specially designed blending chamber to thoroughly blend
hot and cold water.
*The M-159 model is available in bronze or bronze chrome-plated material.
Wall-Mounted Series for Hot and Cold Water
Wall-mounted unit is designed to mount one inch away from the walls.
• Operable on normal city water pressure
(see flow chart, page 12)
Unit Shown:
M-159TM with Strahman
Hose Assembly A in Black
PARTS LIST
Part No.
1
2
3
4
6
8
10
11
12
13*
13
20
21
22
36
36
Part
Body
Cap Screw
Lock Washer
Connector
Sleeve Anchor (Not shown)
Hose Rack
Spacer
Wall Plate (Not shown)
Union Nut
Ball Check Valve (Includes Part 36)
Flat Check Valve (Includes Part 36)
Union Gasket (Not shown)
Union Tail Piece (Not shown)
Inlet Union Nut (Not shown)
Ball Check Gasket
Check Valve Gasket (Not shown)
M-159 Material
Bronze
SST 304
SST 410
Brass
SST 304
SST 304
SST 302
Brass
Brass
Brass/Stainless Steel
Brass/Stainless Steel
SST/Inconnel
Non Asbestos
SST 303
SST 303
Copper, Teflon Coated
Order by name and number. *Sold as a complete unit.
See page 35 for control valve parts.
CAUTION:
These units are not suitable for steam service.
6
M-750 Material
SST 316
SST 304
SST 410
SST 303
SST 304
SST 304
SST 302
SST 303
SST 304
Non Asbestos
MP-88 stainless steel mounting plate is standard on M-750
and optional on M-159 series.
M-159 (Bronze*) Wall-Mounted/M-750 (Stainless Steel) Wall-Mounted Dimensions
M-159TM (Bronze*) Wall-Mounted/M-750TM (Stainless Steel) Wall-Mounted Dimensions
**
**Temperature Gauge: 20-100˚C/60-220˚F.
* Available bronze chrome plated
7
Hot and Cold Water Recessed
M-159 and M-750 (All Stainless Steel) Recessed Series
M-159TM and M-750TM (All Stainless Steel)Recessed Series
Recessed Series for Hot and Cold Water
Strahman’s recessed mixing units-hose stations for hot and cold water are designed
to conceal mixing unit piping in a stainless steel box for recessed wall mounting.
The entire mixing unit, with exception of the handwheels and valve bonnets, is
covered with a removable stainless steel plate. All exposed parts are either bronze
chrome plated or stainless steel depending on the unit selected. These units are
ideal for new construction or other places where concealed piping and good looks
are desirable.
Unit Shown:
Recessed M-159TM
with Strahman Hose
Assembly A in Red
Note: Custom enclosures available for surface mounting and/or
inclusion of auxiliary equipment.
Note: When ordering, specify angle valves (back entry)
Note: For Parts see page 6
MODEL M-159 Recessed
MODEL M-159TM Recessed
*
* Note: Temperature Gauge: 20-100˚C/60-220˚F.
CAUTION:
8
M-159TM (Bronze/Chrome) Recessed/M-750TM (All Stainless Steel) Recessed Dimensions
*
*Note: Temperature Gauge: 20-100˚C/60-220˚F.
9
Hot and Cold Water Pedestal
M-159 and M-750 (All Stainless Steel) Pedestal Series
M-159TM and M-750TM (All Stainless Steel)Pedestal Series
Pedestal Series for Hot and Cold Water
Strahman’s pedestal-type mixing units-hose stations for hot and cold water
can be mounted anywhere floor piping is available. The unit’s pedestal tube,
head and cover are ruggedly constructed of stainless steel, while the mixing unit
is completely bronze chrome-plated or stainless steel, making it ideal where efficiency
and rugged construction are desired.
Note: For parts, see page 6.
MODEL M-159 Pedestal
Unit Shown:
Pedestal M-159TM
chrome plated
with Extruded Hose
Assembly Y (yellow)
with Hydro-Pro 150®
spray nozzle
MODEL M-159TM Pedestal
*
*Note: Temperature Gauge: 20-100˚C/60-220˚F.
CAUTION:
10
(Pedestal Head, Tube and Base Stainless Steel)
M-159TM (Bronze/Chrome) Pedestal/M-750TM (All Stainless Steel) Pedestal Dimensions
(Pedestal Head, Tube and Base Stainless Steel)
11
M-159/M-750 Flow Chart / Stainless Cabinet
The M-159/M-750 (All Stainless Steel)
Hot and Cold Water Mixer Series Flow Chart
Example: Available Pressure -50 psig, 60 psig.
@50 psig Use “0” psig Curve to Get 7 gpm Total Flow
@60 psig Use “0” psig Curve to Get 7.5 gpm Total Flow
To Get Hot Water gpm Flow Through Unit:
1. 50 psig Hot Water
50 psig Cold Water
3.5 gpm Hot Water
3.5 gpm Hot Water
7 gpm Total Flow
60 psig Cold Water
2.75 gpm Hot Water
4.25 gpm Cold Water
7 gpm Total Flow
50 psig Cold Water
4.5 gpm Hot Water
3.0 gpm Cold Water
7.5 gpm Total Flow
“I’ve used Strahman equipment for the past 21 years. Strahman stands by their
equipment, providing customer service and technical assistance we can count on.”
Mike, Associate Director, Pharmaceutical Industry
12
Instructions for Computing Above:
To get the gpm flow from the unit, use the hot water
pressure psig indication shown above. From 50 psig
hot water go to the “0” psig curve and move to the bottom of the chart, which shows maximum water flow
gpm. This would indicate a flow of 7 gpm.
To get the gpm of hot water being used through the
unit, go to 50 psig hot water pressure and move to
50 psig cold water pressure. Drop to maximum water
flow gpm. This would indicate 3.5 hot water gpm,
3.5 cold water gpm for a total of 7 gpm. Keep in
mind, if you increase the cold water pressure you
decrease the hot water gpms.
CEC-1000 Series
Completely Enclosed Cabinet Recessed Wall-Type Station
Strahman’s CEC-1000 stainless steel cabinets keep mixing units and hoses out of the way and free from dust. Any standard
Strahman wall-mounted, mixing unit-hose station can be installed in this spacious cabinet, which is designed with flush
hinges to allow the unit’s large double doors to swing open 180°, making it easy to access and clean the enclosed unit.
INDIVIDUAL UNIT SPECIFICATIONS FOR CABINET MOUNTING ARE AVAILABLE UPON REQUEST.
• Maximum recommended operating temperature: 200˚F/93° C
Note: When Ordering, specify angle valves (back entry)
CEC-1000 Dimensions
Note:
Shown: M-5000 Unit with Hose Assembly enclosed in cabinet above.
* Temperature Gauge: 40-120˚C/100-250˚F.
Note: Custom enclosures available for surface mounting and/or inclusion of auxiliary equipment.
13
Hot or Cold Water Wall-Mounted
M-156N* and M-756 (All Stainless Steel) Wall Mounted Series
These hot or cold water hose stations are designed for use wherever hose service is required.
The compact units include a single control valve, stainless steel hose rack and mounting attachments.
Wall-mounted unit is designed to mount one inch away from the wall.
*The M-156N model is available in bronze or bronze chrome-plated material.
Wall-Mounted Series for Hot or Cold Water
M-120 Hose Station
The M-120 Wall Mounted Hose Station is made of Stainless Steel and comes
with (2) 1/2” stainless steel Wall Mounting Bolts and Zinc plated steel Anchors
for strength and durability.
• 3/4” Full Port 316 Stainless Steel Ball Valve, PTFE Packing
• Stainless Steel Hose Rack
• Stainless Steel 1/2" Wall Mounting Bolts
• Stainless Steel 1/4 Turn On-Off Valve for ease of operation
• Zinc Plated Steel Anchors
Unit Shown:
M-756 with mounting plate,
Strahman Hose Assembly S in Red
Model M-120 Dimensions
PARTS LIST
CAUTION:
14
Part No.
Part
Material
1
2
3
4
5
6
Ball Valve
Bracket
Hose Rack Connector
Hose Rack
Hose Rack Spacer
1/2"Bolt
316 SST
304L SST
303 SST
302 SST
303 SST
18-8 SST
M-156N (Bronze*) Hose Station/M-756 (All Stainless Steel) Hose Station
Wall-Mounted Dimensions
Model M-156N Hose Station
*Available Bronze Chrome plated
PARTS LIST
Part No.
1
2
3
4
6
8
10
11
20
21
22
Part
Body
Cap Screw
Lock Washer (Not shown)
Connector
Sleeve Anchor (Not shown)
Hose Rack
Spacer (Not shown)
MP 88 Mounting Plate (Not shown)
Union Gasket
Union Tail Piece
Inlet Union Nut
M-156N Material
Bronze
SST 304
SST 304
Brass
SST 302
M-756 Material
SST 316
SST 304
SST 410
SST 303
SST 304
SST 302
SST 303
SST 304
Non Asbestos
SST 303
SST 303
MP-88 stainless steel mounting plate is standard on M-756 and optional on M-156N. Refer to page 37.
Note:
For Parts 20, 21, 22 see page 35.
Order by name and number.
15
Hot or Cold Water Recessed and Pedestal
M-358 and M-758 (All Stainless Steel) Recessed/Pedestal Series
Designed for use where concealed piping and attractive appearance are required, these hose stations produce hot
or cold water. The compact unit includes a single control valve, stainless steel hose rack, and mounting attachments.
Recessed Series for Hot or Cold Water
Recessed wall-type hose station is enclosed in a stainless steel box for easy mounting.
Note: When ordering, specify angle valve (back entry)
or globe valve (top entry).
Unit Shown:
Recessed M-358
3/4” NPT
Pedestal Series for Hot or Cold Water
Strahman’s pedestal-type hose stations for hot or cold water
can be mounted anywhere floor piping is available.
CAUTION:
16
(Pedestal Head, Tube and Base Standard Stainless Steel)
17
Steam and Cold Water Thermostatically Controlled
Mixing Unit-Hose Stations
Thermostatically Controlled Mixing Unit – Model M-5000-TS
Safe, automatic control over steam and cold water!
The Model M-5000-TS lets you combine steam and cold water to produce hot water efficiently – without the
safety concerns normally associated with steam use. Allowing for a maximum water temperature of 190°F, the
automatic unit includes an easy-to-use temperature gauge that senses even slight variations to monitor water
temperature accurately. The M-5000-TS unit’s thermostatically designed safety shutoff valve prevents the unit
from overheating, and the thermostat is hydraulically formed, liquid-filled bellows. Strahman also offers its new
M-5000-TS Conversion Kit, which will retrofit the original M-5000 mixing unit to provide the same operating
ranges and temperatures, as well as a thermostat that prevents temperature fluctuations. Backed by Strahman’s
two year warranty.
Features:
• Thermostatically designed safety shutoff valve prevents unit from overheating
• Automatically compensates for water pressure fluctuations to maintain
desired temperature setting
• Thermostat is hydraulically formed, liquid-filled bellows
• Removable parts for easy cleanup and inspection
• Unit and conversion kit are both easily installed
• All bronze body with bronze, brass and stainless steel internal parts
• Maximum water temperature of 165°F/74°C
• Minimum water temperature of 100°F/38°C
• Maximum working pressure of 150 psi for steam and 80 psi for cold water
• Minimum working pressure of 80 psi for steam and 50 psi for cold water
Unit Shown: M-5000-TS Unit shown
with optional M-88 Mounting Plate
NOTE:
The hose supplied with unit is not
intended for use with pure steam.
18
Thermostatically Controlled Mixing Unit – M-5000-TS Dimensions
Part No.
Part
Material
Qty.
COP/TFE
EPDM
2
1
2
3
BALL CHECK GASKET
O-RING WATER
CHAMBER HOUSING
4
WATER CHAMBER
SST
1
5
STEAM JET
SST
1
6
O-RING STEAM JET
EPDM
1
7
8
SST
EPDM
1
2
SST
EPDM
1
1
EPDM
1
12
ACTUATOR SLEEVE
O-RING BLENDING
CHAMBER
SPRING
O-RING
THERMOSTAT HOUSING
O-RING
STEAM ADJUSTER
O-RING POPPET STOP
EPDM
1
13
POPPET SPRING
SST
1
14
GUIDE EXTENSION
SST
1
15
PUSHER
SST
1
16
POPPET
SST
1
17
SEAT
SST
1
18
STEAM INJECTOR
SST
1
19
DIFFUSER SCREEN
SST
1
9
10
11
POPPET SEAT TOOL
1
POPPET TOOL
1
Note: See Page 2 for Additional Parts.
If overheating of water should occur
due to restrictions in lines or pressure
fluctuations, make adjustment to
19
Hot and Cold Water Thermostatically Controlled
Thermostatically Controlled Mixing Unit – Model M-200-TS
Precision control over hot and cold water!
The Model M-200-TS features rugged construction and superb quality for superior thermostatic control.
The unit’s accurate and solid, liquid-filled thermostat allows you to set the exact output water temperature
desired – from 80°F to 160°F. With its durable bronze body construction, the M-200-TS valve features
replaceable components that resist corrosion. Both the piston and liner are made of stainless steel material
for long-lasting reliability. The unit also includes an integral shutoff valve. Backed by a one year warranty.
Features:
• Precise temperature control from 80°F/27°C to 160°F/71°C
• Adjustable temperature limit stop for maximum safety
• Replaceable components facilitate servicing
• Maximum water temperature of 160°F/71°C
• Maximum working pressure to 125 psi
• Senses and compensates for temperature or pressure
fluctuations (up to a 50% drop in inlet supply pressure)
• Maintains temperature to + –3˚F
• Inlet piping: 3/4" ball valves on 6" centers
• Lo-Flow rate: 5-7 GPM
• Color coded temperature dial
• Bronze and stainless steel construction,
bronze chrome plated available
Thermostat:
• Senses slight pressure fluctuations
• Is a hydraulically formed, liquid-filled bellows
• Is linear in its expansion and exerts
the highest possible operating force directly
to the valve piston
• Must have a minimum 15˚F differential
between hot and cold inlet and outlet
set temperature
NOTE:
The hose supplied with unit is not
intended for use with pure steam.
20
1/2” Lo-Flow Unit
3/4” Hi-Flo Unit Available: flow rate 10-12 GPM
Thermostatically Controlled Mixing Unit – M-200-TS Dimensions
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16*
17
18
Part
HANDLE
BALL VALVE
CHECK VALVE †
UNION NUT
GASKET
CHECK VALVE ADAPTER
MIXING VALVE
CONTROL KNOB
STREET ELBOW
U-BOLT
#10 NUT
MOUNTING PLATE
NIPPLE
TEMPERATURE GAUGE
TEE
HOSE ASSEMBLY Y
SWIVEL-PRO ADAPTER
HYDRO-PRO 150®NOZZLE
Material
Qty.
SST
1
SST
2
CR PLATED BRS
2
CR PLATED BRS
2
COP/TFE
2
CR PLATED BRS
2
CR PLATED BNZ/SST INT 1
NYLON
1
CR PLATED BRS/SST
2
SST
1
SST
2
SST
1
CR PLATED BRS/SST
1
SST
1
CR PLATED BRS/SST
1
CR PLATED FITTINGS
1
BRASS/PLASTIC
1
SST/BRS/NYLON
1
* Hose Assembly “Y“ is standard with #21S swivel
adapter and M-70 spray nozzle.
Note: Drawing shown with optional “ergonomic package“
Hydro-Pro 150® spray nozzle and Swivel-Pro adapter on
lightweight extruded hose.
UNIT ONLY FLOW
FLOWCAPACITIES
CAPACITIES SINGLE
SINGLE STAGE (NO HOSE)
70
60
50
45
40
35
30
HI
GH
25
2"
20
1/
PRESSURE DROP, POUNDS PER SQUARE INCH
† Drawings shown with optional check valve.
15
10
9
8
7
6
5
1
2
3
4
5
6
7
8 9
10
15
20
30
35
FLOW OF WATER, GALLONS PER MINUTE
If overheating of water should occur
due to restrictions in lines or pressure
fluctuations, make adjustment to
21
Hoses
Hoses
Strahman Hose Assemblies
Strahman has been supplying industrial strength hoses since 1921. We combine years of solid craftsmanship and innovative new solutions to
offer hoses that are safe, reliable, durable, and easy to maintain.
All Strahman hoses are assembled with bronze, bronze chrome-plated, or stainless steel fittings. Some hoses include stainless steel internal
spring assemblies on one or both ends for added durability and extended hose life.
Hose I.D.
Description
3/4” - Extruded
5/8” - Extruded
1/2” - Extruded
5/8” - Premium Wrapped
5/8” - Premium Wrapped
5/8” - Microban
Colors
Available
Red
Black, Yellow, White
Red
Red, White
Black
Yellow
SVI Max.
PSI Rating
150 PSI
150 PSI
150 PSI
150 PSI
150 PSI
150 PSI
Temperature
Rating
Minus 20 - 200 d.F.
Minus 20 - 200 d.F.
Plus 23 - 176 d.F.
Minus 20 - 200 d.F.
Minus 20 - 200 d.F.
Minus 20 - 200 d.F.
Manufacturer’s
PSI Rating
300 PSI
300 PSI
500 PSI
300 PSI
300 PSI
300 PSI
Minimum
Burst
1,500
1,500
2,000
1,500
1,500
1,200
Use/Rating
Code
A
B
C
D
E
F
USE/RATING CODES:
A: USE - Excellent oil and abrasion resistance, good chemical resistance. RATING - General Purpose hose for Water & Air.
B: USE - Excellent abrasion resistance, oil, fat and chemical resistance. RATING - General Purpose hose for Food, Water & Air with FDA approved tube.
C: USE - Oil and fat resistance. RATING - High pressure wash down for Food and Pharmaceutical plants.
D: USE - Oil, fat and chemical resistance. RATING - General Purpose hose for Food, Water & Air with FDA approved tube.
E: USE - Oil, fat and chemical resistance. RATING - General Purpose hose for Food, Water & Air.
F: USE - Anti-microbal cover. Oil and chemical resistance. RATING - General Purpose hose for Water.
• 5/8” I.D. Premium Wrapped Red Hose with FDA
approved internal tube.
• 5/8” I.D. Premium Wrapped White Hose with FDA
internal tube-food grade hose.
• 5/8” I.D. Premium Wrapped Black Hose with black
internal tube.
• 5/8” I.D. - Extruded Yellow, (shown) White or Black Hose with
FDA approved internal tube.
Also Available:
• 3/4” I.D. Extruded Red Hose with black internal tube for Hi-Flo unit.
• 1/2” I.D. Extruded VALUE LINE Red Hose with black internal tube for garden hose connection.
• 5/8” I.D. Extruded Yellow Microban Hose with black internal tube.
22
NOTE:
Strahman hoses come standard in 25, 50, 75, & 100 foot lengths.
Standard length 50 foot hose supplied for use on Mixing Units / Hose Stations.
Check with factory if longer length is required.
Hoses
For Mixing Unit/Hose Station
Connection...Extruded Hose option
Extruded Hose Assembly – A Lower Cost Hose
for a Variety of Applications
Strahman’s Extruded “Yellow” Hose costs less than our
standard braided hoses, making it an economical solution for applications
that don’t require PREMIUM WRAPPED construction. The Extruded Hose
is flexible, lightweight, and easy to handle, yet it offers the same
heavy-duty quality you expect from Strahman.
This versatile, bright “yellow,” 5/8-inch I.D. hose expertly
resists oil, abrasives, and fatty and lactic acids, and it’s designed
to handle a wide range of temperatures and work pressures.
Extruded Assembly... available yellow, black and white
Shown: “Extruded” Hose
Assembly with HP-150 nozzle
5/8” I.D. EXTRUDED high pressure hot water hose with 3/4” Male NPT
fitting on unit end, swivel adapter and M-70 spray nozzle on nozzle end.
For Hose Reel Connection...Heavy-Duty Wrapped Water Hose
Hose Assembly R and RS – Available Only For Spring Rewind Hose Reels
Masterfully crafted with precisely woven super-strength cord, Strahman’s PREMIUM WRAPPED water hose is engineered to
provide extreme flexibility and strength, while remaining lightweight. In fact, it’s the easiest handling hose made. The hose
is covered with Neoprene, making it resistant to lactic acid and oil. And its unique braided construction resists kinks and
contributes to the hose’s agility, making it as flexible as rope and practically indestructible.
• Maximum recommended operating temperature: 200˚F/93˚C • Maximum working pressure: 150 psi
R and RS (All Stainless Steel) Hose Assemblies
5/8” I.D. high-pressure, Neoprene PREMIUM-WRAPPED, Homoflex hot water hose. 5/8” hose adapter on hose reel with ball
stop. Internal spring assembly and bronze M-70/S-70 series nozzle on nozzle end.
For Mixing Unit/Hose Station Connection...Standard Hose
Hose Assembly A and S for Mixing Unit/ Hose Station Connection
This high-pressure, Homoflex, 5/8-inch I.D. hot water hose is made to fit Strahman’s mixing units. (The M-5000/M-5700
series, as well as the M-159/M-750 mixing unit series, and the M-156N/M-756 hose station series.) All hose is intended for
use with hot and cold water only, and should not be used for steam service. This hose assembly is available in black, white,
or red.
A and S (All Stainless Steel) Hose Assemblies
5/8” I.D. high pressure Neoprene PREMIUM-WRAPPED Homoflex Black hot water hose with 3/4” Male NPT fitting on one
end, and M-70/S-70 Series Spray Nozzle with Swivel Connector on the other end. The Internal spring assembly is on nozzle
end and unit end.
Consult the factory or your authorized Strahman
sales representative for steam applications.
23
Hoses / Hose Reels
Hoses
Heavy-Duty Water Hose Assembly for Garden Hose Connection
“E” and “ES”(All Stainless Steel) Hose Assemblies
This high-pressure, black, Homoflex, 5/8-inch I.D.
hot water hose (with 3/4-inch female garden hose coupling on one end) is appropriate for any general hot- or cold-water
wash down operation where a hose and spray nozzle are necessary. It is intended for use with hot and cold water only, and is
not appropriate for use in steam service. This hose assembly comes in black, but is also available with a white hose and nozzle,
or a red hose and nozzle.
Other lengths are available.
Assembly “E” & “ES” — For General Washdown with Hot or Cold Water where a hose and Spray Nozzle are required 25ft.,
50ft., 75ft., 100ft.,— for Hot and/or Cold Water use only.
5/8” High pressure Homoflex Black Hot Water Hose with 3/4” Female Garden Hose coupling on one end and
M-70/S-70 Series Spray Nozzle with Swivel Connector on other end. (Internal spring assembly on nozzle end.)
The Hi-Flo 16™ Hose Assembly
Packs a 16 gpm punch for even the most stubborn wash downs when packaged
with OUR HI-FLO UNITS
With the Hi-Flo 16 Hose Assembly, you can handle the toughest cleanup jobs with minimal hand
and wrist fatigue. Hi-Flo is ergonomically designed to work from a fan spray to a solid stream
pattern and minimize misdirected spraying. The Hi-Flo HP-150 nozzle includes
a patented trigger that locks in the desired position – so you don’t need to
maintain
trigger pressure.
• Maximum operating temperature 200˚F/ 93° C
• Maximum working pressure to 150 psi (10 BAR)
• Flow rate is 16 gpm at 80 psi
• 3/4” I.D. Red Extruded Hose
Note: Intended for water use only;
should not be used with
steam service.
Accessories and replacement parts
NOZZLE - HOSE
• Replacement parts available
• Complete nozzle repair kit available
NOTE:
Strahman cannot guarantee the performance of these
hoses unless used with a Strahman nozzle and mixing unit.
24
Hose Reels
Available In Stainless Steel and Carbon Steel
Strahman’s spring rewind hose reels, in stainless steel or carbon steel models,
make winding and rewinding our heavy-duty water hose quick and efficient,
and provide tidy hose storage and protection. Our reels are equipped with
a heavy-duty internal spring motor for effortless winding and rewinding.
A sturdy ratchet assembly locks the reel when the desired length of hose
has been pulled out; a gentle tug on the hose will unlock the reel and trigger
the spring motor to retract the hose. Each hose reel includes a hose ball
stop to prevent damage to the hose reel rollers and our water saver nozzle.
These convenient and sturdy hose reels can be installed on the floor,
wall or ceiling, and come equipped either with or without our standard
Strahman Hose Assembly R or RS (with stainless steel fittings and nozzles).
This hose assembly includes our 5/8-inch I.D. heavy-duty water hose,
in either black, red or white, with our water saver spray nozzle.
Ceiling mount might require a special heavy-duty spring.
• Holds up to 50 ft. and 100 ft. of hose
These reels are available for use with the following Strahman units:
M-156N, M-159/M-159TM, M-358, M-750/M-750TM, M-756, M-5000, M-5700
Note: The Strahman spring rewind hose reel is now available for use with the M-5000 or M-5700 mixing unit series.
Contact factory for details.
Spring Rewind Hose Reel Dimensions
Hose reel designed to be used with our 5/8" ID hose.
“Strahman Valves are the life support system at our company and we barely ever have to order repair
kits. The Strahman wash down equipment takes a lot of abuse, but we pick it up and it works every time.
We are a 24-hour operation and we use Strahman products, including the Sampling Valves, every season
– both inside and outside. We don’t use anyone else. We have grown and they’ve grown with us.”
Larry, Maintenance Manager, Edible Oil Plant
25
Hose Reels / Nozzles
Hose Reels
Hi-Sanitary Stainless Steel Hose Reel
Our Hi-Sanitary Stainless Steel Spring Rewind Hose Reel is perfect for sanitary or
harsh environments. The reel’s polished, bare finish helps reduce the risk of
contamination from chipped paint, providing the best surface
for even the most stringent sanitary requirements. Offered to
you by Strahman, the Hi-Sanitary Stainless Steel Hose Reel
delivers the quality and durability you depend on for all your
wash down applications.
Key benefits:
• Open construction allows for easy wash down and
hand/brush scrubbing to minimize trapped food material
• Mounting plate with opening for easy cleaning and drying
• Automatic spring rewind assembly for safe, quick and easy
rewind of hose
• All 304 stainless steel construction resists rust and corrosion
• Easily installed on floor and wall only
Hi-Sanitary Stainless Steel Hose Reel Dimensions
Hose reel designed to be used with our 5/8" ID hose.
26
Nozzles
Strahman M-70 (Bronze) / S-70 (Stainless Steel) Series
Spray Nozzles—
Many of our customers have said Strahman spray nozzles are the best on the
market. That’s because at Strahman, we combine modern and innovative
engineering with premium quality parts to build hose nozzles strong enough
to withstand even the most rugged applications.
All of Strahman’s spray nozzles are available in black, white or red,
and are available made entirely of stainless steel. Special assembly
for food grade is also available. Strahman nozzles work best
under these standards:
M-70/S-70
• Flowrates: 5-7 gpm under normal conditions
(50-80 psi)/10 gpm max at 150 psi
M-75/S-75
This rubber-coated, precision-made nozzle enables the operator to achieve
any type of stream of water – from a soft spray to a strong, straight stream –
simply by pressing the lever. This convenient control of the wash water
assures better cleaning with a lot less effort.
The Automatic Water Saver Spray Nozzle automatically shuts off the
moment the lever is released, thereby eliminating all waste of water.
• Available in black (M-70, S-70), white (M-75, S-75) or red (M-77, S-77)
with rubber covers in the same colors for easy replacement.
Note: Intended for water use only; should not be used with steam service.
Strahman Mini M-70
Strahman– The Industry Leader adds the Mini M-70 to its family of Nozzles.
The Mini M-70 weighs only1.8 lbs. and provides the same high quality
as Strahman’s premium heavy-duty M-70.
• Long Handle Design Grip for whole hand placement
• Rev-o-cap Renewable Cartridge Unit design for greater longevity
• Maximum recommended operating temperature: 200°F/93°C
• Replaceable (heavy-duty) Renewable Rubber Cover now available in black
• Stainless Steel Seat design prevents nozzle seat leakage
• Bronze and Stainless Steel construction
• Instant water shut-off when trigger is released
• Includes 1/2”, 5/8”, 3/4”, or 3/4” GHT swivel adapter with locking ring
• Not recommended for steam service
M-77/S-77
Mini-M-70
NOTE:
Strahman nozzles are designed for water
use only. Not suitable for steam service.
27
Nozzles/Accessories
Nozzles
The Hydro-Pro 150® Spray Nozzle—”All Stainless Steel”
Heavyweight performance in a lightweight design!
The Strahman Hydro-Pro 150 is constructed with a stainless steel housing for strength
and durability, yet this solid, water saver spray nozzle weighs less than two pounds,
and is ergonomically designed to reduce user fatigue. In addition to being extremely
lightweight, the Hydro-Pro 150 features a patented, locking trigger mechanism that
allows users to lock in a desired spray pattern without having to maintain pressure on the trigger.
It also reduces misdirected spraying. Equipped with a waterproof nylon cover that resists cracks
and abrasions, this rugged nozzle lasts for a long time and stays cool even when using water
as hot as 200˚F. It’s the most advanced spray nozzle around – and it’s only from Strahman.
• Flowrates: 5-7 gpm under normal conditions (50-80 psi) 10 gpm max at 150 psi
• Available: black, white or red Cover
Note: Intended for water use only; should not be used with steam.
Quick Connect - The Hydro-Pro 150® QC Spray Nozzle
Revolutionary nosepiece designed for easy 1/4 turn to connect and disconnect. Special Quick Connect attachments. Same great
performance as original Hydro-Pro 150 Spray Nozzle.
Quick Connect Attachments
• 2 gallon soap reservoir bottle
• 6” extension wand with a 16 oz. bottle
• 6” extension wand with interchangable heads (adjustable and chisel type)
• 24” extension wand straight flow only
• 36” extension wand with interchangable heads (adjustable and chisel type)
• Available with or without swivel adapter
• Flow rates: 5-7 gpm under normal conditions (50-80 psi) 10 gpm max. at 150 psi
“The Hydro-Pro 150 is comfortable to hold, with no discernable heat transfer to workers’
hands. And, the new nozzles have been dropped, scraped and banged during test use,
yet continue to work perfectly.”
28
Michael, Production Manager, Soft Drink Bottling Plant
Nozzles
Lightweight Industrial Spray Nozzle
P-70 Series
The P-70 Lightweight Industrial spray nozzle was primarily designed for the
restaurant industry, commercial and industrial kitchens, where light industrial
service is required. For heavy-duty industrial service, please refer to the original
M-70 Spray Nozzle and our Mini M-70 Spray Nozzle.
Strahman’s new P-70 Lightweight Industrial spray nozzle weighs just 1.3 lbs.
offering Strahman quality at an economical price.
• Adjustable spray pattern from a fine spray to a steady stream
• Bronze and Stainless Steel internal construction
• Nozzle body made of FDA approved space age material
• Low co-efficient of heat transfer
• Flow rate: 7 GPM
• Not suitable for steam service
Extension Nozzle
E-76 and S-76 (Stainless Steel) Series
For those hard-to-reach places!
The Strahman Extension Nozzle was designed specifically for use in the meat-packing industry. It includes a standard,
water-saving spray nozzle with a three-foot standard stainless steel extension shaft for washing down meat, and for
use in other hard-to-reach applications. (Special length extension shafts are available upon request.) Governmentapproved and industry-tested, the Extension Nozzle includes interchangeable heads – one for adjusting the water stream
from a steady stream to a fine spray; the other is a chisel head which gives off a fan spray.
The extension’s curved head directs spray water in a downward direction, perfect for washing away grease
and grime that might drip onto meat from overhead rafters. (Straight extensions are also available.)
• Also available made entirely of stainless steel (S-76 series)
Note: Intended for water use only, and is not suitable for steam service.
“The Strahman Spray Nozzles simply do not wear out. It’s just an
excellent product. They are simply the best on the market. I’m
looking forward to trying the new Hydro-Pro® Spray Nozzle.”
Ron, Superintendent, Bakery Industry
29
Nozzles and Accessories
Nozzles
Soft Spray Only Nozzle
F-90 and S-90 (Stainless Steel) Series
Won’t damage breakable products!
Strahman’s Soft Spray Only Nozzle releases a soft spray that won’t damage breakable products.
And it shuts off automatically when the nozzle’s lever arm is released.
• Available in black (F-90, S-90), white (F-95, S-95) or red (F-97, S-97)
The Thermo-Pro 2000™ Spray Nozzle
A temperature indicator and plastic insulated handle with molded guard at no charge!
The Thermo-Pro 2000 Spray Nozzle gives you an easy-to-use lever arm and molded
rubber hand guard for complete control and flexibility. Providing a versatile
spray range from solid stream to soft fan – Thermo-Pro 2000 is the ideal solution
for a wide variety of industries and applications.
• Indicates water temperatures from 140˚F/60°C to 200˚F/93°C
• Replaceable rubber covers available in red, white or black
Solid Stream only Spray Nozzle
S-80 Series (Specify Bronze or Stainless Steel)
Washes solids away!
This heavy-duty, Strahman Solid Stream Nozzle releases a solid stream of water
only, and is perfect for applications where fast, efficient cleanup is necessary, but
with minimum moisture. The Strahman Solid Stream Nozzle washes away solids while
keeping surrounding areas dry.
• Available in black (S-80), white (S-85) or red (S-87)
“We buy the Strahman Nozzles because in essence there is no
competition. There is no product on the market that matches the
quality and durability of Strahman.”
30
Glen, General Manager, Sweetener Manufacturer
Accessories, Adapters and Fittings
Nozzle Accessories
Strahman provides numerous nozzle accessories to meet your cleanup needs.
Mixing Unit Wall Plate with Nozzle Hook
MP-88-NC Series
This all stainless steel mounting plate conveniently secures both our mixing units and water
saver spray nozzles to the wall, keeping hoses secure and out of the way.
Available for use with:
M-156N/M-756
Hydro-Pro 150® Spray Nozzle
M-159/M-750 Series
Automatic Water Saver Series
M-5000/M-5700
Wall Plate with Nozzle Hook
NC-MP Series
Made entirely of stainless steel, this mounting plate provides
convenient off the floor storage for our water saver spray nozzles.
Nozzle Hook
NC-98 Series
This all stainless steel mounting hook attaches to the hose rack on our mixing
unit-hose stations to provide safe and efficient storage of our water saver spray nozzles.
The Nozzle Hook can be field installed on existing unit-mounted hose racks.
M-156N/M-756
M-159/M-750 Series
M-5000/M-5700
“I think the Strahman Spray Nozzles are really rugged. Our guys can really abuse the
product. They are reliable, well built and can withstand the heavy use in our cellars.
We’ve had some in our facility for over 11 years. Strahman hoses and nozzles get
dragged around our rough floor and they can really take it.”
Lorenzo, Maintenance Supervisor, Winery
31
Adapters / Swivels
Adapters and Swivels
Hose Accessories and Adapters
Numerous, easy-to-install hose accessories and adapters are available to keep your Strahman hoses and nozzles
operating properly. Stainless steel hose accessories and adapters are also available upon request.
Nozzle End Internal stainless steel spring assembly (nozzle end) includes bronze stainless steel Swivel Hose Adapter
for use on Hose Assemblies A and E. Also available in all stainless steel for Hose Assembly S.
Unit End Internal stainless steel spring assembly (unit end) includes a bronze 3/4" male NPT adapter for use on
Hose Assembly A.
Note: Internal spring assemblies for use with 5/8-inch hose only. Also available in all stainless steel for Hose Assembly S.
#21 Regular Adapters (Non-Swivel) and
#21S Swivel Adapters (Brass/Stainless Steel)
1/2" I.D. hose barb on one end
and 1/2" male NPT on the other end.
3/4" female garden hose thread on one end
32
Adapters and Swivels
#S21 (Non Swivel) Regular Adapters and
#S21S Swivel Adapters (All Stainless Steel)
3/4" female garden hose thread on one end
The Swivel-Pro (Brass/Stainless) and Super Swivel-Pro (All Stainless Steel)
Part of a complete “ergonomic hose package”!
TM
TM
Swivel-Pro, our latest swivel adapter, features an exclusive
ergonomic design. The swivel adapter increases nozzle control
to allow circular, horizontal and vertical nozzle movements –
while maximizing your comfort and safety. With our sturdy yet
lightweight Hydro-Pro 150® Spray Nozzle and our Hose Assembly Y,
Swivel-Pro completes an “ergonomic hose package” that’s perfect for
any industrial application.
• 1/2 in., 5/8 in. and 3/4 in. I.D. hose by 1/2 in. male NPT and Retro Fit
• Available in bronze or stainless steel
• Maximum working temperature 200˚F/93˚C
Note: Swivel-Pro retrofit available for all Strahman hose assemblies.
33
Kits and Valves
Kits
Service Kits
Strahman’s service kits, in standard and stainless steel models, provide tools for properly maintaining your Strahman
nozzles and valves, and avoiding unnecessary downtime. Each kit includes service instructions.
M-70 Series and S-70 (Stainless Steel) Series
Nozzle Kits
Quantity
1
Part Number Part
#20B
*Black Renewable
Rubber Cover
4
#S
Renewable Cartridge
Units
2
#6
Lever Arms
2
#18
Cages
4
#24
Lever Arm Screws
6
#22
Lever Arm Bushings
4
#28
Lock Ring Assemblies
6
#32
Body Sealing O Rings
*Specify color cover required
3/4-inch Stainless Steel Valve Kit
Quantity
1
1
1
5
2
5
3
Part Number
#8
#13
#9
#3
#2
Part
Ring Puller
Ring Seater
Lantern
Packing Rings
Springs
Bottom Valve Rings
Base Rings
M-5000 Service Kit
Quantity
1
1
1
5
2
5
3
1
1
2
4
2
Part Number Part
Ring Puller
Ring Seater
#8
Lantern
#13
Packing Rings
#9
Springs
#3
Bottom Valve Rings
#2
Base Rings
Poppet Tool
Poppet Seat Tool
#7
Poppet Seats
#5
* Steam Poppets
#13
Ball Check Assemblies
w/Gaskets Part #36
*Specify L,M or H poppet and valve casting number
when ordering
3/4-inch Bronze Valve Kit
V-14-S, V-14-U, V-18 Only
Quantity Part Number
1
1
1
#8
5
#13
2
#9
5
#3
3
#2
Specify valve casting number
Part
Ring Puller
Ring Seater
Lantern
Packing Rings
Springs
Bottom Valve Rings
Base Rings
34
Valves
Valves
Soft Seal Piston Valve Dimensions
Bronze, Bronze Chrome-Plated, Stainless Steel
Model Shown: V-14-U 3/4" Globe Type (Union Connection).
Models Available: V-14-S 3/4" Globe Type (Screwed Ends).
V-18 3/4" Angle Type (Screwed Ends).
SST Models: V-65-SU, V-65-SS and V-18-SS
Soft Seal Piston Valve
3/4-inch Standard and Stainless Steel Models
Strahman’s Soft Seal Piston Valve features Teflon® to make turning and tightening practically effortless. A stainless steel
piston enters a soft Teflon coated ring to form a super tight seal without the need for laborious turning. This unique
closure principle prevents foreign materials from interfering with the seal and positively prevents leaks. Hoses stay cool,
last longer and wear out less.
• 3/4-inch valve for use with Strahman’s mixing unit-hose stations
• Made with bronze body/all stainless steel working parts
• Available in chrome plated model
• Also available made completely of stainless steel (V-65/V-18 Series)
Teflon® is a registered trademark of DuPont.
35
kits and Accessories
Kits
Conversion Kit
3/4-inch Soft Seal Conversion Kit
Converting your existing Strahman 3/4-inch valves is a snap with our 3/4-inch Soft Seal Conversion Kit. This easy-to-use kit
allows you to quickly replace your Strahman 3/4-inch valves, and keep your Strahman hose equipment running smoothly.
To install conversion kit:
1. Loosen bonnet nut #11 and remove entire bonnet assembly from body #1.
2. Using puller, remove old valve ring #3 and base ring #2 from valve body #1.
Blow out all foreign matter inside valve body.
3. Remove handwheel #16, nut #17, lock washer #18, identification tag #19, packing gland #14, packing nut #15
and bonnet nut #11 from old valve body. Set these parts aside for re-use upon conversion.
4. Drop new base ring #2 into ring pocket in valve body #1.
5. Place valve ring #3 on seating tool and drive into valve body as far as it will go.
Keep seater tool straight as possible when inserting ring.
6. Install lantern #8 with larger diameter and wider section of band facing up.
Make sure lantern #8 sits evenly on ring.
7. Reassemble bonnet nut #11, packing gland #14, packing nut #15, handwheel #16 and parts #17,
#18, and #19 to conversion kit assembly. Tighten packing unit #15 lightly.
8. Before installing the soft seal conversion kit into valve body, fully retract stem #6. Install into body.
Tighten down bonnet nut #11 to refusal point.
36
Accessories
Automatic and Manual Steam Traps for M-5000/M-5700 Units
Strahman’s steam traps remove condensate from pipe lines, which eliminates the problem of “water hammer” when the
M-5000/M-5700 units are first used.
Operation
The automatic steam trap will shut off automatically when steam pressure accumulates in the line. Condensate is carried
off by copper tubing. To remove condensate from manual steam trap, open valve. When steam starts to appear, shut off
valve. Condensate is carried off by copper tubing.
Stainless Steel Mounting Plate
MP-88 Series
Stainless steel unit mounting plates are
standard equipment with all stainless steel
Strahman wall-mounted mixing units.
However, these sturdy units can also be
purchased separately for use with these
Strahman wall-mounted units:
M-159/M-159TM
M-5000/M-5000TS
M-156N
HR-100 and HR-100L Series
Strahman’s stainless steel, wall-mounted hose racks help keep hoses neatly
coiled and in place. The HR-100 model is holds up to 50 feet of Strahman hose
and can be easily mounted on any conventional masonry wall. Perfect for places
where hose service is needed but a mixing unit is not. Our HR-100L model will
hold up to 100 feet of Strahman hose.
37
THE STRAHMAN FAMILY
OF PRODUCTS ALSO INCLUDES:
DRAIN VALVES
Also known as tank bottom valves, RAM valves or piston valves, our
drain valves are used to empty vessels or to take process samples.
There’s no clogging, no leaking and no misalignment.
SAMPLING VALVES
We have a full line of sampling valves that produce live samples
without exception. Our valves are designed to prevent failure caused
by sediment or clogging.
Contact your Strahman representative for complete details.
Visit us on the Web at:
Strahman Valves, Inc. has been dedicated to excellence since 1921,
both in the reliability of our products and in the responsiveness of our
customer service. Our experience making high quality, durable and
long-lasting products at competitive prices have made us world renown
in design and manufacturing ; this has been the key to Strahman’s
success for more than eighty years.
2004
New
New Products
Products
VISIT
VISIT US
US ON
ON THE
THE WEB
WEB AT:
AT:
STRAHMAN VALVES, INC. 3 Vreeland Rd. Florham Park, NJ 07932 USA
Tel 973-377-4900 Fax 973-377-8288 Toll Free 877-STRAHMAN
047.5MCPL

Strahman Valves, Inc.

Transcription

Similar documents

kik-step®

Guardian GLHL-SS GLHR-SS

Primo NSF_sellsheet

Mineflex Brochure - Reel Easy

Skate Deterrents

GOLDENHORN 12S

Printable PDF – KE300TH

Product sheet BBPE050.4A

Data Sheet For DLM Series Lokma Sweet Machine

TRANSFLOW M-34R SANITARY RAW MILK TUBING SIZES: ½”5/8