class # 44 super view digital caliper

Transcription

CLASS # 44
SUPER VIEW DIGITAL CALIPER
This is similar to a dial caliper except it displays in a digital, easy to read
format. It displays either inches or millimeters at the push of a button. There
is a button for automatic zero and it has a resolution of 0.1mm/0.01” with an
accuracy of plus or minus one thousandth of an inch or 0.2 mm.
The unit is powered by a silver oxide battery, that will last for years, and
it has a low battery warning. The battery is supplied with the instrument and
is replaced with a common 1.5V nicad battery.
The body of this unit is an aerospace grade composite material of carbon
fiber and the measuring range is from 0” to 6” with a throat depth of 1-9/16”.
Easier to read than dial type calipers, and gives fast, accurate measurements
in the field when a tape measure just won’t do the job. Imported.
ITEM#:
DIGITAL
DESCRIPTION:
6” SUPER VIEW DIGITAL CALIPER
CLASS # 44
41 PC. TAP & DIE SET
For threading repairs in machinery and other metal projects, these tap and
die sets are perfect for autos, motorcycles, general shop, farm, and home use.
Features both national coarse and national fine threads, or metric coarse and
metric fine threads. Made of high alloy steel.
This set includes 17 taps and 17 of the equivalent hexagonal solid dies up
to 1/2”. Also includes one adjustable die tool with a built in stock guide, two
‘T’-handle tap wrenches, one adjustable tap wrench, one screw pitch gauge,
and one screwdriver. Blow mold carrying case included. Import.
SAE – Contents
• 17 pc. Taps & 17 pc. Dies: 4-40unc, 6-32unc, 8-32unc,
10-24unc, 10-32unf, 12-24unc, 1/4-20unc, 1/4-28unf,
5/16-18unc, 5/16-24unf, 3/8-16unc, 3/8-24unf, 7/1614unc, 7/16-20unf, 1/2-13unc, 1/2-20unf, 1/8NPT27
• 1 – Adjustable Tap Wrench
• 1 – ‘T’ Handle Tap Wrench
• 1 – Adjustable Die Wrench
• 1 – Screwdriver
• 1 – Screw Pitch Gauge
• 1 – Storage Case
Metric – Contents
• 17 pc. Taps & 17 pc. Dies: M3 x 0.5, M3 x 0.6, M4 x
0.7, M4 x 0.75, M5 x 0.8, M5 x 0.9, M6 x 0.75, M6 x
1.0, M7 x 0.75, M7 x 1.0, M8 x 1.0, M8 x 1.25, M10 x
1.25, M10 x 1.5, M12 x 1.5, M12 x 1.75, 1/8NPT27
• 1 – Adjustable Tap Wrench
• 1 – ‘T’ Handle Tap Wrench
• 1 – Adjustable Die Wrench
• 1 – Screwdriver
• 1 – Screw Pitch Gauge
• 1 – Storage Case
ITEM#: THREADS:
642
SAE
643
METRIC
DESCRIPTION:
CLASS # 44
45 PC. JUMBO TAP & DIE SET
Made of heat treated and tempered Tungsten steel, this ‘Jumbo’ tap and
die set covers both National coarse and National fine thread ranging up to 1”
in SAE (Standard American Equivalent) or Metric coarse and Metric fine up
to 24mm. Includes taps and equivalent dies.
Set includes adjustable tap wrench, ‘T’ handle tap wrench, screwdriver,
pitch gauge, die stock, 20 taps for inside threads, 20 dies for outside threads
and both in coarse and fine from 1/4” to 1” or 6mm to 24mm. The set comes
in a rugged 2’L x 18”W x 1”D blow mold carrying case. Import.
Metric Sizes:
Metric Coarse: (size x thread)
6 x .75 - 8 x 1 - 10 x 1.5 - 12 x 1.5
14 x 1.5 - 16 x 1.5 - 18 x 1.5
20 x 1.5 - 22 x 1.5 - 24 x 1.5
Metric Fine: (size x thread)
6 x 1 - 8 x 1.25 - 10 x 1.5 - 12 x 1.75
14 x 2 - 16 x 2 - 18 x 2.5 - 20 x 2.5
22 x 2.5 - 24 x 3.0
SAE Sizes:
National Coarse: (size x thread)
1/4 x 20 - 5/16 x 18 - 3/8 x 16 - 7/16 x 14
1/2 x 13 - 9/16 x 12 - 5/8 x 11 - 3/4 x 10
7/8 x 9 - 1 x 8
National Fine: (size x thread)
1/4 x 28 - 5/16 x 24 - 3/8 x 24 - 7/16 x 20
1/2 x 20 - 9/16 x 18 - 5/8 x 18 - 3/4 x 16
7/8 x 14 - 1 x 14
ITEM#:
644
644M
DESCRIPTION:
45 PC. JUMBO TAP & DIE SET - SAE
45 PC. JUMBO TAP & DIE SET - METRIC
CLASS # 44
TITANIUM
45 PC. JUMBO TAP & DIE SET
Titanium coated tungsten steel dissipates heat 7 times faster than regular
Tungsten steel, which extends the life of the tool. This ‘Jumbo’ tap and die
set covers both National coarse and National fine thread ranging up to 1” in
SAE (Standard American Equivalent) or Metric coarse and Metric fine up to
24mm. Includes taps and equivalent dies.
Set includes adjustable tap wrench, ‘T’ handle tap wrench, screwdriver,
pitch gauge, die stock, 20 taps for inside threads, 20 dies for outside threads
and both in coarse and fine from 1/4” to 1” or 6mm to 24mm. The set comes
in a rugged 2’L x 18”W x 1”D blow mold carrying case. Import.
Metric Sizes:
Metric Coarse: (size x thread)
6 x .75 - 8 x 1 - 10 x 1.5 - 12 x 1.5
14 x 1.5 - 16 x 1.5 - 18 x 1.5
20 x 1.5 - 22 x 1.5 - 24 x 1.5
Metric Fine: (size x thread)
6 x 1 - 8 x 1.25 - 10 x 1.5 - 12 x 1.75
14 x 2 - 16 x 2 - 18 x 2.5 - 20 x 2.5
22 x 2.5 - 24 x 3.0
SAE Sizes:
National Coarse: (size x thread)
1/4 x 20 - 5/16 x 18 - 3/8 x 16 - 7/16 x 14
1/2 x 13 - 9/16 x 12 - 5/8 x 11 - 3/4 x 10
7/8 x 9 - 1 x 8
National Fine: (size x thread)
1/4 x 28 - 5/16 x 24 - 3/8 x 24 - 7/16 x 20
1/2 x 20 - 9/16 x 18 - 5/8 x 18 - 3/4 x 16
7/8 x 14 - 1 x 14
ITEM#:
644TIT
644TITM
DESCRIPTION:
45 PC. TITANIUM TAP & DIE SET - SAE
45 PC. TITANIUM TAP & DIE SET - METRIC
CLASS # 44
HI-CARBON TAP TAP & DIE SETS
These 37 piece tap and die sets are made of high carbon tool steel. Plug taps
are furnished in each set and the dies are hexagon style. They are available in SAE
and metric and they include the T-handle tap wrench and come in a sturdy plastic
case.
37 PC. MASTER METRIC HEX DIE SET
Set Contains:
Hi-Carbon Steel Plug Taps and Hex Die Sizes:
3mm x 0.50, 3mm x 0.60, 4mm x 0.70, 4mm x 0.75,
5mm x 0.80, 5mm x 0.90, 6mm x 1.00, 7mm x 1.00,
8mm x 1.25, 9mm x 1.00, 9mm x 1.25, 10mm x 1.25,
10mm x 1.50, 11mm x 1.50, 12mm x 1.50, 12mm x
1.75, 1/8-27 NPT Pipe
T-Handle Tap Wrench: 0 to 1/4 & 3/16 to 1/2
Supplied in sturdy plastic case
ITEM #: 50150
37 PC. MASTER NC/NF SAE HEX DIE SET
Set Contains:
Hi-Carbon Steel Plug Taps and Hex Die Sizes: 4-40,
6-32, 8-32, 10-24, 10-32, 12-24, 1/4-20, 1/4-28. 5/1618, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/1620, 1/2-13, 1/2-20, 1/8-27 NPT Pipe
T-Handle Tap Wrench: 0 to 1/4 & 3/16 to 1/2
Supplied in sturdy plastic case
ITEM #: 50120
ITEM#:
50150
50120
DESCRIPTION:
HI-CARBON STEEL HEX TAP & DIE SET - METRIC
HI-CARBON STEEL HEX TAP & DIE SET - SAE
CLASS # 44
ARROW WELDING MAGNETS
These handy magnets are powerful ‘helping hands’ when welding pieces
of materials together. They’re used in many welding, soldering or assembly
projects and can even be used as ‘floaters’ to separate piled steel plates.
Also used with a shop crane to lift material and transfer it these magnets
are available in 25 lb, 50 lb, and 75 lb strengths and are configured with 45°,
90°, and 135° angles both inside and outside. They can lift and hold any type
of ferrous metal. Imported.
ITEM#:
ARROW25
ARROW50
ARROW75
DESCRIPTION:
25 LB. ARROW WELDING MAGNET
CLASS # 44
VICTOR TYPE WELDING KIT
This ‘Victor’ type welding kit contains everything needed, except the gas
and tanks. For welding, cutting or as a torch, this professional quality kit will
weld to 1/4” thick and cut up to 1/2” thick with the tips included but with the
addition of optional tips available anywhere, this outfit can weld up to 1-1/4”
and cut up to 6” thick.
Interchangeable with Victor® brand welding attachments and is UL listed
and approved. Imported.
Kit Includes:
a
a
a
a
a
a
a
a
a
a
a
a
Torch handle
Oxygen regulator
Acetylene regulator
Cutting attachment
Cutting nozzle #2
Welding nozzles: #0, #2, & #4
15’ x 1/4” Oxy/Acetylene
welding hose
Tip cleaner
Goggles
Spark lighter
Spanner
Carrying case
ITEM#:
WELD
DESCRIPTION:
VICTOR TYPE WELDING KIT
CLASS # 44
SLIDE HAMMER PULLER SET
Eases removal of flange type axles, oil seals, bearings and other press fit
parts. The jaws can be set up for either 2 or 3 jaw internal or external pulling
for inside or outside pulling of gears.
Also includes a puller hook for general pulling as well as a standard dent
puller end so that you can easily do body panel repairs. You can even thread
a vise-grip wrench to the end and use that as a universal puller.
Made of chrome vanadium steel and chrome plated to prevent corrosion
and rust. Comes with heavy duty carrying case. Imported
•
•
•
•
•
•
•
•
ITEM#:
332
Includes:
External 3 Jaw Puller
Internal 3 Jaw Puller
External 2 Jaw Puller
Internal 2 Jaw Puller
Grip Wrench Adapter
Puller Hook
Rear Axel Puller
Dent Puller
DESCRIPTION:
SLIDE HAMMER PULLER SET
CLASS # 44
BALL JOINT SERVICE KIT
This is a 3-in-1 service kit for removing and installing press fit parts such
as ball joints, universal joints, and truck brake anchor pins. This heavy duty
set contains a ‘C’-frame press with a 12” forcing screw and 3 receiver tubes;
2-3/4” ID x 3” OD, 2-1/4” ID x 2-1/2” OD, and 1-3/4” ID x 2” OD. Includes
two installation and removing adaptors.
Removes even the most rusted and corroded parts and makes brake work
and front end jobs a snap. This set comes in a convenient, rugged blow mold
carrying case. Import.
ITEM#:
324
DESCRIPTION:
BALL JOINT SERVICE SET
CLASS # 44
BEARING RACE & SEAL DRIVER SET
This bearing race and seal driver set will save time and will also protect
those expensive bearing jobs. It is designed to make it easier to insert wheel
bearing race and seals without damage to race and axel housing.
This set includes nine disc sizes to fit most wheel bearings, then turn disc
over to drive seals. Comes complete in a rugged blow mold carrying case for
convenient storage and retrieval. Machined aluminum construction. Import.
•
•
•
•
•
•
•
•
•
ITEM#:
323
Sizes:
No. 1 - Size 1.565"
No. 2 - Size 1.750"
No. 3 - Size 1.965"
No. 4 - Size 2.325"
No. 5 - Size 2.470"
No. 6 - Size 2.555"
No. 7 - Size 2.830"
No. 8 - Size 2.995"
No. 9 - Size 3.180"
DESCRIPTION:
BEARING RACE AND SEAL DRIVER SET
CLASS # 44
BEARING SEPARATOR PULLER KIT
This bearing separator kit allows the user to quickly and efficiently dismount
various machine parts attached to shafts. This kit includes a bearing separator and
bolt, 4 main rods, a beam and a center bolt and is rated at 5 tons. Includes a rugged
blow mold carrying case.
Includes:
Bearing separator and bolt: 30mm~50mm w/
bolt: 3/8” x L n120mm x 24T & 50mm~75mm
w/ bolt 1/2” x L 135mm x 20T
4 pc. main rods
1 pc. beam, center bolt
ITEM#:
368
DESCRIPTION:
BEARING SEPARATOR PULLER KIT
CLASS # 44
COMPRESSION TEST KIT
One of the easiest and important ways to test an engine’s health is by checking
its compression. That can be accomplished with this complete compression test kit
that detects worn piston rings, cylinders, damaged valves and blown head gaskets.
Simply test compression by threading the appropriate hose and adapter into the
spark plug hole. The impact resistant gauge measures up to 300 PSI and the hoses
and adapters will fit any engine.
Includes:
Compression gauge with protective
rubber and quick change coupler
Aluminum extension tube
Angled aluminum extension tube
NBR hose fits M14 & M18
Extension thread head - Inner: M14
outer: M14
Blow mold carrying case
ITEM#:
361
DESCRIPTION:
COMPRESSION TEST KIT
CLASS # 44
AIR CONDITIONER MANIFOLD GUAGE
This air conditioner manifold gauge set is vital when recharging the air
conditioning system in trucks and cars. The red and blue air hoses connect to
the high and low pressure Schrader valves on the engine manifold and the
yellow hose connects to an external pump for evacuating the system and
then to the coolant canister for recharging.
This kit features a heavy duty aluminum body with solid brass air hose
fittings and metal gauge housing with liquid packed, vibration free gauges.
The large aluminum knobs are easy grip and extremely durable. The housing
has a sturdy hook for hanging the unit from inside the hood while operating.
Includes:
Blue, low-side gauge: 2-3/4” diameter,
0-350 PSI
Blue hose: 1/2” ACME x 54” with
knurled quick connect fitting
Red, high-side gauge: 2-3/4” diameter,
0-500 PSI
Red hose: 1/2” ACME x 54” with
knurled quick connect fitting
Yellow charging hose: high pressure,
1/2” ACME x 72” with anti-backflow
fitting.
(2) adjustable couplers for blue and red
hose
Deluxe R-134a compatible
Carrying case
ITEM#:
762
DESCRIPTION:
ALUMINUM AIR CONDITIONING GAUGE KIT
CLASS # 44
AVIATION TIN SNIPS
Professional quality, aviation type tin snips with drop forged, alloy steel
blades that are hardened and tempered for strength and durability. The heat
treated handles come with a safety latch lock and feature color coded vinyl
grips with thumb stops to prevent slipping. All three snips are 10” long.
They will cut up to 18 gauge sheet metals, copper, tin or brass and the 3
piece set includes a left cutting, right cutting and a neutral (straight cutting).
The 10” straight cutting, (neutral) is also available individually. Imported.
ITEM#:
634
TIN
DESCRIPTION:
3 PC. AVIATION TIN SNIP SET
10” STRAIGHT AVIATION TIN SNIP
CLASS # 44
BOLT CUTTERS
Heavy duty, chromium molybdenum, (also known as ‘Chrome Moly’), is
a general purpose steel that doesn’t easily corrode or deform under stress or
harsh working conditions. The use of Chrome-Moly in these bolt cutters will
assure that they perform well under rigorous applications.
They have a short and very hard cutting edge to accommodate chain link,
high grade bolts, reinforcing rods, and the high test rods used in pre-stressed
concrete. They meet or exceed U.S. Government Spec # GGG-C-740D.
CAPACITY:
14” - 1/4”
18” - 5/16”
24” - 3/8”
30” - 1/2”
36” - 5/8”
• 42” - 3/4”
•
•
•
•
•
ITEM#: SIZE:
650
14”
651
18”
652
24”
653
30”
654
36”
DESCRIPTION:
CHROME-MOLY BOLT CUTTERS
CLASS # 44
HEX KEY SETS
25 PC. HEX KEY SET
Chrome vanadium steel with black
nitrate finish. Vinyl pouch included.
Long Arm SAE Sizes
1/16”, 5/64”, 3/32”, 7/64”, 1/8”, 5/32”,
3/16”, 7/32”, 1/4”, 5/16” and 3/8"
Short Arm Metric Sizes
0.05, 1.27, 1.5, 2, 2.5, 3, 4, 4.5,
5, 5.5, 6, 7, 8 and 10mm
ITEM#: 669
10 PC. METRIC T-HANDLE
HEX KEY SET
Color coded, PVC handles on 6” long
chrome vanadium steel keys with a black
nitrate finish. Metal stand included.
Sizes:
2, 2.5, 3, 4, 4.5, 5, 5.5, 6, 8 and 10mm
ITEM#: T-HEXM
10 PC. SAE T-HANDLE
HEX KEY SET
Color coded, PVC handles on 6” long
chrome vanadium steel keys with a black
nitrate finish. Metal stand included.
Sizes:
3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 3/16”,
7/32”, 1/4”, 5/16” and 3/8"
ITEM#: T-HEX
ITEM#:
669
T-HEXM
T-HEX
DESCRIPTION:
25 PC. METRIC & SAE HEX KEY SET
10 PC. ‘T’-HANDLE HEX KEY SET - METRIC
10 PC. ‘T’-HANDLE HEX KEY SET - SAE
CLASS# 44
6 PIECE JUMBO HEX KEY WRENCHES
This is a 6 piece set of ‘L’ shaped ‘Allen’ type hex keys in the large sizes for
big cap bolts and machine hex bolts. They are made from heavy duty, black finish
chrome vanadium steel and super heat treated for durability and strength.
They are available in both SAE (Standard American Equivalent) from 3/8” to
3/4” and in Metric from 8mm to 19mm. IMPORTED
SAE Sizes:
¾ 3/8”
¾ 7/16”
¾ 1/2”
¾ 9/16”
¾ 5/8”
¾ 3/4”
Metric Sizes:
¾ 08 mm
¾ 10 mm
¾ 12 mm
¾ 14 mm
¾ 17 mm
¾ 19 mm
ITEM#:
DESCRIPTION:
684
6 PIECE JUMBO HEX KEY WRENCH SET - SAE
684M
6 PIECE JUMBO HEX KEY WRENCH SET - METRIC
CLASS # 44
PUNCH & CHISEL SETS
12 PC PUNCH & CHISEL SET
Specifications:
¾
¾
¾
¾
¾
¾
¾
¾
Drop Forged CR-V Steel
Heat Treated and Tempered
6 Chisels: 1/2”, 3/4”, 7/8”, 3/4”, 13/16”, 1”
3 Tapered Punches: 1/8”, 3/8”, 1/4”
2 Center Punches: 5/16”, 1/4”
1 Pin Punch: 3/8”
Length: 6 1/2” to 10”
1 Vinyl, See-Through Carrying Pouch
ITEM#:
667A
DESCRIPTION:
12 PC. PUNCH & CHISEL SET
NEIKO 12 PC HEAVY DUTY PUNCH & CHISEL SET
Specifications:
¾
¾
¾
Drop Forged and Heat Treated
Black Chrome with Polished Tips
6 Cold Chisels: 1/2” x 6”, 5/8” x 7”, 3/4” x 8”,
7/8” x 8”, 7/8” x 10”, 1” x 10”
¾ 3 Taper Punches: 1/8” x 6”, 7/32” x 10”
3/8” x 10”
¾ 2 Center Punches: 5/32” x 6”, 7/32” x 8”
¾ 1 Pin Punch: 3/8” x 8”
¾ 1 Canvas Pouch
ITEM#:
DESCRIPTION:
N144
12 PC PUNCH & CHISEL SET
8 PC JUMBO PUNCH & CHISEL SET
Specifications:
¾ Hardened, Black, High Carbon Steel
¾ Hex Shafts are 3/4” to 1” Thick
¾ 3 Chisels: 3/4”, 1”, and 1 1/4”
¾ 2 Diamond Point Punches
¾ 3 Alignment Punches
¾ Punches and Chisels are 8” to 12” Long
¾ 1 Vinyl Pouch
ITEM#:
DESCRIPTION:
667
8 PC. PUNCH & CHISEL SET
CLASS # 44
NUMBER & LETTER DIE PUNCH SET
This 36 piece punch set features large 1/4” numbers, letters and the ‘&’ sign for
stamping names, words, birthdays and more into metal. Personalize pieces made of
copper, silver, brass and more!
The set includes 26 letter punches (A through Z) 9 Number Punches (0-9) use
the ‘6’ punch upside down for a ‘9’, and 1 ‘&’ symbol punch .The pieces come in a
durable plastic box that will hold all of the punches perfectly when not in use. All
punches are made of tempered steel.
ITEM#:
657
DESCRIPTION:
36 PC. LETTER & NUMBER PUNCH SET
CLASS # 44
12 PC. FILE ASSORTMENT
This 12 piece universal file set includes a file for almost any application
in either wood or metal. Each file is heat treated and case hardened steel and
made to withstand the harshest abuse, year after year.
Includes 7 metal files:
• 8" half-round
• 6" slim taper
• 6" extra-slim taper
• 8" rotary mower
• 8" flat mill
• 6" round mill
• 10" flat mill
ITEM#:
658
Includes 3 wood rasps:
• 8” round wood
• 8” half-round wood
• 8” 4-way
2 PVC slip on handles
1 vinyl roll-up pouch
DESCRIPTION:
12 PC. METAL & WOOD FILE ASSORTMENT
CLASS # 44
4 PC GEAR PULLER SET
This complete set of reversible gear and bearing pullers can be used for
pulling either inside the gear or clamped over the outside of the gear. The set
features a full range from 3”, which can be used as a bearing puller, up to an
8” that will open up to cover a 17” gear. It can be adjusted longer or shorter
for a reach of 2-3/4” to 10-1/2”.
They’re heat treated and hardened to withstand great pressure without
the center post pulling apart from the jaws. The posts are precisely aligned to
give you a positive and equal pull and the set includes one each of 3”, 4”, 5”
and 8”. Made of forged steel with a chrome finish. Imported.
ITEM#:
665
DESCRIPTION:
4 PC. 3-JAW GEAR PULLER SET
CLASS # 44
3 WAY POWER HAND STAPLER
This handy stapler has 1,001 uses. It's perfect for screen repair, carpeting,
upholstery etc. The heavy duty spring action drives the staples for a secure
hold and the safety bar prevents accidents when not in use.
Uses standard 5/32” ~ 9/16” staples, 3/8” ~ 9/16” round staples and even
5/16” ~ 9/16” nails. Comes with starter box of above staples. Perfect for any
carpenter. Imported.
ITEM#:
879
DESCRIPTION:
3 WAY POWER STAPLER WITH STAPLES
CLASS # 44
2 - WAY HAND RIVETER
This two way hand riveter can be used in either a horizontal position or
vertically which will allow for the best pressure in any confined space.
They’re made of heavy gauge, heat-treated steel with vinyl grips and a
highly polished, chrome head. The spanner wrench, used to change the rivet
heads is kept inside one of the handles and the 4 heat-treated interchangeable
dies store conveniently on the outside of the handle.
Includes ten each of four different sized rivets: 3/32”, 1/8”, 5/32” and
3/16”. Imported.
ITEM#:
800
DESCRIPTION:
2 - WAY HAND RIVETER W/ 40 RIVETS
CLASS # 44
4 PC. ‘C’ CLAMP SET
This set of four ‘C’ clamps is constructed of cast steel and heat treated for
strength and durability. They have heavy duty sliding ‘T’ handles and screw
shafts and the anvil and tip base are perfectly aligned to hold material firmly.
Each set contains one each of 3”, 4”, 6”, and 8” and all clamps meet U.S.
Federal specs GGG-C-406D. Excellent for professional use. Imported
ITEM#:
647
DESCRIPTION:
4 PC. ‘C’- CLAMP SET - 3”, 4”, 6” 8”
CLASS # 44
30 PC. COMBO HEX KEY SET
This is a 30 piece set of ‘Allen’ type hex key wrenches in a convenient,
compact case. They are made from industrial quality vanadium steel with the
black anodized chrome finish and the set includes the ‘Long Arm’ SAE sizes
as well as the ‘Short Arm’ Metric sizes.
There are 15 sizes in metric from .07 mm to 10 mm and 15 of the SAE
sizes from .028 of an inch to 3/8”. IMPORTED
ITEM#:
DESCRIPTION:
N102
30 PC. COMBO HEX KEY SET – SAE & METRIC
CLASS # 44
PRY BARS & WRECKING BARS
4 PC. PRY BAR SET
This 4 pc. pry bar set is heat
treated and case hardened for
strength. They’re unbendable
under extreme pressure.
They have tough, two-fisted
handles on the ends made of
heavy duty, impact plastic.
Set includes one each of an
8” x 9/32”, 12” x 3/8”, 18” x
7/16”, and 24” x 7/16”.
ITEM#:
660
DESCRIPTION:
4 PC. PRY BAR SET
WRECKING BARS
• Super strong
• Heat treated
• Heavy steel
• Nail puller end
• Pry bar end
ITEM#:
676
677
DESCRIPTION:
2’ HEAVY DUTY WRECKING BAR
4’ HEAVY DUTY WRECKING BAR
CLASS # 44
2 PC. NUT SPLITTER SET
This handy tool is used to crack or split a nut that is stripped or stuck on
to a bolt due to age, corrosion or rust. It has a fully hardened, steel chisel that
is driven by a large screw, and a drop forged, chrome vanadium steel body.
Simply place the splitter head over the nut and turn the chisel bolt with
an adjustable, boxed, or ratchet wrench and socket. This will drive the chisel
through the side of the nut splitting it to the threads of the bolt. Repeat on an
opposite end of the nut and it will separate in two.
This two piece set will split nuts from 1/2" to 5/8", (12 to 16mm), with
the smaller head and the large splitter will handle nuts from 5/8" to 7/8", (16
to 22mm). Works on both SAE and Metric nuts and is faster than a torch or a
hacksaw.
ITEM#:
NUTS
DESCRIPTION:
2 PIECE NUT SPLITTER SET
CLASS # 44
SOCKET WRENCH ACCESSORIES
9 PC. WOBBLE EXTENSION SET
•
•
•
•
•
•
For getting into deep, hard to
reach areas
Heat treated, chrome vanadium
steel
3 Drives: 1/4”, 3/8” and 1/2”
Each drive has 3 different
lengths: 3”, 6” and 9”
Socket end wobbles for the best
angle to fit any application
Imported
ITEM#: 690
____________________________
3 PC. FLEX HEAD RATCHETS
•
•
•
•
•
Ratchet heads adjust from
0-90°
Heat treated, chrome vanadium
steel
3 Drives: 1/4”, 3/8” and 1/2”
Knurled handles for better grip
Imported
ITEM#: FRS
ITEM#:
690
FRS
DESCRIPTION:
9 PC. WOBBLE EXTENSION BAR SET
3 PC. FLEX HEAD RATCHET SET
CLASS # 44
DOUBLE SHELF UTILITY CART
Features a sturdy, 1” square tube frame, and measures 34” high, 16” wide,
and 30” long. It has two 3” deep shelves that can be positioned at the middle,
bottom, or top of the frame.
The baked on enamel shelves are not hung on inserts like the cheaper carts
but instead are bolted through the frame on all four corners, so they will not
sag or buckle under the weight of tools or parts.
Rolls easily on four 4” rubber casters and two of them have the step down
locking levers to either hold their position or free wheel. The rated capacity
on these rugged carts is 500 lbs. maximum. Color may vary. Imported.
ITEM#:
DESCRIPTION:
330
DOUBLE SHELF UTILITY CART
330WD DOUBLE SHELF UTILITY CART W/ DRAWER
CLASS # 44
VIPER 18 DRAWER TOOL CHEST
This is an exceptionally heavy duty and slick looking tool chest. It has a
.08mm steel shell with 1.0mm steel drawers and full width aluminum drawer
pulls. It is powder coated with a glossy, jet black finish that gives this chest a
great look and feel.
It comes in two sections; a 9 drawer, 41” wide chest that sits perfectly
on top of the 9 drawer, 42” wide rolling cabinet. Together, this unit is 42”
wide and 5’ tall on its four 5” x 2” casters. The drawer slides are 3 segment,
quick release, ball bearing mechanism with a load rate of 100 lbs. each and
each chest section has two tubular, chromed steel side handles. Coded locks,
keys and drawer pads included.
Specifications:
ITEM#:
VIPER1
•
•
•
•
•
•
9 Drawer Rolling Bottom Cabinet
W
D
H
4 Drawers - 37-1/4” x 16” x 1-7/8”
2 Drawers - 23-1/2” x 16” x 1-7/8”
1 Drawer - 23-1/2” x 16” x 7-3/4”
1 Drawer - 11-5/8” x 16” x 1-7/8”
1 Drawer - 11-5/8” x 16” x 13-3/4”
Weight - 145.1 Lbs.
•
•
•
•
•
•
9 Drawer Stationary Top Chest
W
D
H
3 Drawers - 11-5/8” x 16” x 1-7/8”
1 Drawer - 9-1/4” x 16” x 1-7/8”
4 Drawers - 23-1/2” x 16” x 1-7/8”
1 Drawer - 11-5/8” x 16” x 7-3/4”
1 Opening Top Tray - 41” x 16” x 1-7/8”
Weight - 218.3 Lbs.
DESCRIPTION:
41” 18 DRAWER VIPER TOOL CHEST
CLASS # 44
VIPER 11 DRAWER TOOL CHEST
Specifications:
ITEM#:
VIPER2
•
•
•
•
•
W
D
H
2 Drawers - 23-1/4” x 14-1/4” x 1-3/4”
2 Drawers - 23-1/4” x 14-1/4” x 4-3/4”
1 Drawer -- 23-1/4” x 14-1/4” x 2-3/4”
1 Drawer -- 23-1/4” x 14-1/4” x 7-3/4”
Weight - 153 Lbs.
•
•
•
•
W
D
H
1 Drawer -- 23-1/4” x 14-1/4” x 3/4”
4 Drawer -- 23-1/4” x 14-1/4” x 1-3/4”
Top Tray -- 23-1/4” x 14-1/4” x 1-3/4”
Weight - 89.9 Lbs.
DESCRIPTION:
28” 11 DRAWER VIPER TOOL CHEST
CLASS # 44
INSPECTION TOOL SET
This 2-piece inspection tool kit includes 2 replaceable glass mirrors and a
chrome plated brass pole that telescopes in 6 sections from 8" to 30-1/2". It
has a soft grip handle with a pocket clip. Mirror size is 2-1/4". Imported.
ITEM#:
929
DESCRIPTION:
2 PC. TELESCOPING TOOL SET
CLASS # 44
‘F’ BAR CLAMPS
Used mainly for woodworking but perfect for any clamping project. They
are made with cast steel heads, heat treated for strength and durability and a
rugged wood handled turning screw. The bar is tempered and nickel plated
steel and they are available in various bar lengths to accommodate any sized
project. Imported.
ITEM#:
F6
F12
F18
F24
F30
F36
SIZE:
6”
12”
18”
24”
30”
36”
DESCRIPTION:
‘F’-BAR CLAMP
‘F’-BAR CLAMP
‘F’-BAR CLAMP
‘F’-BAR CLAMP
‘F’-BAR CLAMP
‘F’-BAR CLAMP
CLASS # 44
ROYAL RED SHOP RAGS
These shop rags are 15” by 15” square, just the right size for normal clean
up of small spills and other shop accidents. Also known as “grease getters”,
these shop rags are 100% pre-washed cotton and super absorbent.
They have hemmed edges so there’s no lint or fraying even after multiple
washings and they’ve been pre treated to be super absorbent, yet release the
grease, dirt, and grime when they’re washed.
Use them for cleaning up spills, wiping down parts, cleaning machinery or
covering sensitive parts so they don’t get dinged up in the shop or hundreds
of other uses. They’re packed 72 rags to a box.
ITEM#:
RAG
DESCRIPTION:
ROYAL RED SHOP RAGS (72 PACK)
CLASS # 44
48 PC. DRILL ACCESSORY KIT
A great accessory kit for any woodworker. 48 drill bits, forstner bits, plug
cutters, countersinks, power bits, and stop collars plus a hex key and a quick
connect all in a convenient, blow mold carrying case. Imported.
•
•
•
•
ITEM#:
994
Includes:
8 Plug cutters
• 7 Drill bits
8 2” Power bits • 7 Stop collars
7 Countersinks • 1 Hex key
7 Forstner bits
• 1 Quick connect
DESCRIPTION:
48 PC. DRILL ACCESSORY KIT
CLASS # 44
6 PC. WORM GEAR HOSE CLAMP SET
Hose clamps are used for fastening and tightening a hose onto fittings such
as a barb or a nib. They’re used in radiator shops and auto, truck repair shops
for fastening radiator hoses, heater hoses, bypass hoses, etc.
This ‘worm gear’ clamp set contains 2 each of 2-1/4” maximum x 1 5/16”
minimum, 1-1/4” maximum x 1/2” minimum, and 5/8” maximum x 7/32”
minimum diameters. They are not stainless steel. Imported.
2 LARGE CLAMPS
ITEM#:
965
2 MEDIUM CLAMPS
2 SMALL CLAMPS
DESCRIPTION:
6 PIECE WORM GEAR HOSE CLAMP SET
CLASS # 44
SOLDERLESS TERMINAL KITS
Zinc plated sheet insulated with plastic, these solderless terminal kits are
used by electricians, auto repair shops, audio installers, or anyone who needs
a clean, solid wire contact without having to deal with solder.
360 PC SOLDERLESS TERMINAL KIT
(Large Terminals)
ITEM#: TK360
Contents:
20 pcs .157 Bullet (16 - 14 ga.)
20 pcs .157 Female Bullet (16 - 14 ga.)
20 pcs Quick Splice Connectors
20 pcs 10/32 Ring (16 - 14 ga.)
20 pcs 1/4” Ring (16 - 14 ga.)
20 pcs 3/8” Ring (16 - 14 ga.)
20 pcs 10/32 Ring (12 - 10 ga.)
20 pcs 1/4” Ring (12 - 10 ga.)
20 pcs 3/8” Ring (12 - 10 ga.)
20 pcs Butt Connectors (22 - 18 ga.)
20 pcs 10/32 Spade (16 - 14 ga.)
20 pcs 10/32 Spade (12 - 10 ga.)
20 pcs .250 Male Push (16 - 14 ga.)
20 pcs .250 Female Push (16 - 14 ga.)
20 pcs Full Insulated Male (16 - 14)
¾ 20 pcs Full Insulated Female (16 - 14)
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
________________________________________________________________
CRIMPING TOOL/WIRE STRIPPER
ITEM#: 649
8” crimper and stripper for use
with all solderless terminals. Sold
separately.
(Smaller Terminals)
ITEM#: 670
This is an all purpose kit in a very handy,
plastic, sectioned container. There are 360 of
every type of electrical terminal needed.
Contents:
75 pcs 10 Spade (2.5)
75 pcs 10 Spade (1.5)
75 pcs Ring (2.5)
75 pcs Ring (1.5)
20 pcs Male (1.5)
20 pcs female (2.5)
10 pcs Butt Connectors (1.5)
¾ 10 pcs Butt Connectors (2.5)
¾
¾
¾
¾
¾
¾
¾
________________________________________________________________
ITEM#: 671
This assortment includes the most popular
solderless terminals in various sizes. There are
a total of 60 insulated, professional grade butt
connectors, ring terminals, spade terminals
and push-on connectors.
Also included is a top quality, precision
crimping tool used by professional electricians
for crimping ends and stripping different sizes
of wire.
ITEM#:
TK360
670
671
649
DESCRIPTION:
360 PIECE LARGE TERMINAL KIT
360 PIECE SMALL TERMINAL KIT
60 PIECE SOLDERLESS TERMINAL KIT
8” CRIMPING TOOL/WIRE STRIPPER ONLY
CLASS # 44
HAND IMPACT DRIVERS & BITS
HAND IMPACT DRIVER
Easily loosen stubborn screws,
nuts, bolts, etc. with this manual,
hand held impact driver.
Simply add the appropriate bit,
Philips, flat, hex, or socket, then
place on item to be loosened and
strike with a hammer.
Heavy, steel construction with knurled sections for better grip. Available
in 3/8” and 1/2” drive and includes two Philips and two flat bits. Import.
ITEM#:
682
683
DESCRIPTION:
3/8” HAND IMPACT DRIVER TOOL
1/2” HAND IMPACT DRIVER TOOL
11 PC. QUICK CHANGE
INSERT BIT SET
This is the handiest set of bits
you’ll ever own. Includes nine
drivers: three Philips, three flat
and three hex heads, in three of
the most popular sizes.
Also includes a quick change
holder and comes neatly stored
in a small, plastic belt clip case
with small windows over each
bit so they’re visible even with
the case closed. Import.
ITEM#:
779
DESCRIPTION:
11 PC. QUICK CHANGE INSERT BIT SET
CLASS # 44
28 PC. DRIVER BIT SET
This Chicago Power Tools™ driver bit set includes all the bits you’ll need for
a variety of jobs in the shop, garage or home. They are heat treated for maximum
durability and store neatly in a folding carry case. Set includes 18 driver bits, 9 nut
drivers and a magnetic bit holder.
Includes:
Nut driver: 5/32”, 3/16”, (2) 1/4”, 5/16”, (2) 3/8”, 7/16” & 1/2”
Flat 1” drivers: 5/32”, 3/16”, 1/4”, 9/32”,
Flat 2” drivers: 5/32”, 3/16” & 1/4”
Philips 1” drivers: PH0, PH1, PH2
Philips 2” drivers: PH1, PH2 & PH3
Torx bits: T10, T15, T20, T25 & T30
Magnetic Bit Holder
Carrying Case
ITEM#:
995
DESCRIPTION:
28 PC. DRIVER BIT SET
CLASS # 44
JUMBO ‘T-HANDLE’ HEX KEY SETS
These large, 5 piece ‘T’-Handle Hex Key wrenches are made from heat
treated, extruded, alloy steel with a black oxide finish for durability. Rubber
coated ‘T’ handles provide increased turning power with a comfortable, sure
grip.
The handles are color coded, red for SAE and blue for metric, and have
the sizes clearly stamped for easy selection. Both sets come complete with a
heavy duty, vinyl pouch for storage. Imported.
SAE SIZES:
METRIC SIZES:
3/8” - 7/16” - 1/2” - 9/16” - 5/8”
10mm - 12mm - 15mm - 19mm - 21mm
ITEM#:
DESCRIPTION:
685
5PC JUMBO ‘T’-HANDLE HEX KEYS - SAE
685M
5PC JUMBO ‘T’-HANDLE HEX KEYS - METRIC
CLASS # 44
MULTI-PURPOSE ALUMINUM LADDER
This amazing, multi purpose ladder folds into four sections with three
steps per section for a total of 12 steps at an extended length of 12.4’. It has
auto locking hinges at each extension so it can be safely extended to its full
capacity.
The multi position, articulating hinges allow it to be folded into several
different configurations including a traditional 6 step, ‘A’ shape ladder, a 12’
extension ladder, a stair scaffold, a platform and more. It’s the ‘Swiss Army’
knife of ladders!!
Folds compactly stores easily. Has a wide stance with rubber feet and a
330 Lb. working load. Constructed of lightweight yet heavy duty aluminum.
Weighs 26 Lbs. Imported.
•
•
•
•
•
•
•
ITEM#:
689
4 Fold x 3 Steps
Platform Height: 3.35’
‘A’ Ladder Height: 5.9’
Extension Height: 12.4’
Folded: 36” x 14”
Working Load: 330 Lbs.
Weight: 26 Lbs.
DESCRIPTION:
MULTI-PURPOSE ALUMINUM LADDER
CLASS # 44
AUTOMOTIVE TOOLS
SPARK PLUG HOLE CHASER
a High grade tempered steel
a Double ended for both 14mm and
18mm threads
a Use with 3/16” deep socket
a Cleans dirt, carbon and metal
products from spark plug holes
assuring a firm, clean connection
ITEM#: 771
FLAT TIRE REPAIR TOOL
•
Remove object from tire
•
Place rubber cement on
reamer tool
•
•
•
•
•
Includes:
Reamer
Threader
Rubber Cement
Rubber plug strips
•
•
Run reamer tool in
and out of puncture
Load eye of plugging tool with
rubber plugging material
Push plugging material into
puncture, pull out plugging tool
and inflate tire.
ITEM#: 773
CLASS # 44
SUCTION CUPS
These lightweight, multi-purpose suction cups are easy to use, and perfect
for handling sheet metal, glass or any other non-porous material, like certain
fiberglasse and laminates.
The easy action lever simply flips over for suction power and then flips in
reverse to release. The dual suction cup will handle up to 130lbs. with a cup
diameter of 4-3/4”. The single cup holds up to 77lbs. and the cup diameter is
4-5/8".
Can be used for one person auto glass or home glass repair, for handling
large sheets of glass, sheet metal, or laminates. They’re strong enough to use
for small dent removal on autos or trucks. Imported.
ITEM#:
DESCRIPTION:
9039
DOUBLE CUP GLASS SUCTION CUPS
9038
SINGLE CUP GLASS SUCTION CUPS
CLASS # 44
36” BLOW MOLD CREEPER
This is a 36” rolling creeper that auto mechanics use for sliding under a
truck or automobile while doing repair work in the prone position. This is a
heavy duty, plastic ‘blow mold’ construction. (Definition of ‘Blow Mold’: A
polymer is extruded through a die, and then pinched off by a mold. The part
is formed by air being injected into the mold cavity, forcing the polymer to
contour to the cavity walls.)
This creeper is contoured at the shoulder area making it non restrictive
to arm movement so it is easier and more comfortable to work in a tight area
under a chassis. It also has a cushioned headrest and it rolls smoothly on four
2” wheels. IMPORTED
ITEM#:
946
DESCRIPTION:
36” BLOW MOLD CREEPER
CLASS # 44
BATTERIES
Alkaline batteries provide long-lasting
service even at high-drain discharges and
in extreme temperatures.
Dependable even after 5 years' of shelf
storage. Mercury-free formulation means
that these batteries can be safely disposed
of in regular landfills.
Alkaline Batteries
Heavy duty, long life batteries
at a very inexpensive price. 1.5 V.
Imported.
Expocell Batteries
ITEM#:
DESCRIPTION:
AAA
AA
C
D
9V
AAA (4 PK.)
AA
(4 PK.)
C
(4 PK.)
D
(4 PK.)
9VOLT (EACH)
ITEM#:
DESCRIPTION:
A3A
A2A
ACA
ADA
A9VA
AAA (SINGLE)
AA
(SINGLE)
C
(SINGLE)
D
(SINGLE)
9VOLT (SINGLE)
CLASS # 44
BAR CLAMPS
Strong, lightweight and rust resistant, the ‘Speedy Grip’ bar clamps from
Neiko Tools make cabinet or other woodwork a breeze. Pistol grip clamping
action allows for one handed operation with just a squeeze of the trigger and
these clamps can easily be converted from clamp to spreader.
The ‘I’ beam design features a heat treated bar which resists twisting and
bowing under extreme pressure and the clamps are constructed of tough, yet
lightweight resin material and feature non-marring, high grip pads. Import.
ITEM#:
BC6
BC12
BC18
BC24
BC36
SIZE:
6”
12”
18”
24”
36”
DESCRIPTION:
SPEEDY GRIP BAR CLAMPS
CLASS # 44
BONDO SPREADERS
These bondo spreaders are simply hard plastic ‘blades’ that you use when
spreading bondo (dent and hole filler), or glazing putty onto cars, boats, etc.
They can also be used for spreading spackling on walls to cover holes.
They are tapered to an edge to make the spreading smooth and have a hole
in the upper middle for hanging. Packed 100 per box and sold by boxes only.
Item # BS456 is a 3 pack that includes 1 each 4”, 5” and 6”. Imported.
ITEM#:
BS2
BS4
BS5
BS6
BS456
DESCRIPTION:
2” PLASTIC BONDO SPREADERS - (100)
4”, 5” & 6” BONDO SPREADER SET - (1 EA.)
CLASS # 44
6 PC. BRASS WIRE WHEEL SET
Non sparking and softer than steel, brass wire brushes will not scratch soft
metals such as gold, copper, bronze or brass and are ideal for surface prep or
cleaning on these materials.
Uses include burnishing, polishing, non sparking static removal, and some
deburring. This assortment includes a 2” cup brush, one 2” wire wheel, two
1-1/2” wire wheels, a 2-1/2” wire wheel, and a 3” wire wheel and all on 1/4”
shanks for easy use on drills and die grinders. Imported.
ITEM#:
163
DESCRIPTION:
6 PC. BRASS WIRE WHEEL BRUSH SET
CLASS # 44
CHISEL SETS
3 PC. BEVEL CHISEL SET
Features high carbon, tool steel blades
that are hardened, tempered, ground, and
honed and finished with a black oxide to
prevent rust.
The handles are high impact, virtually
unbreakable polypropylene plastic.
This 3 piece set features one each of a
1/2”, 3/4” and 1” wide beveled chisel and
is manufactured in Sheffield, England.
ITEM#:
673
DESCRIPTION:
3 PC. BEVELED CHISEL SET
8 PC. WOOD LATHE CHISEL SET
Used to shape wood as it rotates on a
lathe for making items like table or chair
legs, etc.
Made from high carbon, tempered tool
steel and fully heat treated for hardness
and to hold an edge.
The handles are made from hardwood
and designed for a comfortable and safe
grip.
This set includes one each of the most
popular chisels: 1/4” gouge, 1/2” gouge,
3/4” gouge, 1/2” round nose, 1/2” skew,
1” skew, 1/2” spear & 1/8” parting tool.
ITEM#:
674
DESCRIPTION:
8 PC. WOOD TURNING CHISEL SET
CLASS # 44
WOODWORKING CHISEL SET
This 9 piece chisel set is designed for fine wood work and suited for use by hand
or with a mallet. Each chisel features an extra long handle and blade for increased
leverage.
The blades are chrome vanadium, solid forged steel for retentive blade edge and
the handles are made of tough polypropylene. Sizes include 1/4”, 3/8”, 1/2”, 5/8”,
3/4”, 7/8”, 1”, 1-1/4” and 1-1/2” and the set comes in an aluminum carrying case.
ITEM#:
849
DESCRIPTION:
9 PC. WOODWORKING CHISEL SET
CLASS # 44
METAL FISH TAPES
Contractor’s flat metal fish tapes are encased in lightweight ABS, heavy,
impact plastic housings with viewing holes to make it easy to see how much
metal tape is left on the reel. They’re tough and durable and feature knurled
handles that are easy on the hands.
To operate, simply hold onto the casing and fish the wire out to a desired
length, traveling through ducts, pipes, conduit or any other narrow and hard
to reach areas, then simply attach one end of any length needing to be pulled
back through, such as electrical wire, rope or cable, to the formed metal end,
tape it secure, and pull it back through by holding the handle while rotating
the casing from the inside.
Please note that before pulling any item through any space with a metal
fish tape, that all electricity that may possibly come in contact with the metal
tape itself should be disconnected, as the metal tape is conductive and could
cause serious injury or death. Imported.
ITEM#:
509
511
512
SIZE:
50’
100’
200’
DESCRIPTION:
METAL FISH TAPE
METAL FISH TAPE
METAL FISH TAPE
CLASS # 44
GREASE GUNS
Two, heavy duty, garage style grease guns that feature knurled housing
for better grip and a screw in nozzle that can easily be removed and replaced
with an optional flex hose for harder to reach fittings.
Each gun takes a standard 14 Oz. grease cartridge which just drops into
the chamber or they can be suction or bulk loaded from any available grease
source, and with the smooth action of the lever or pistol grip, they’ll deliver
a smooth flow of grease to any size zirc fitting.
Made of lightweight aluminum and machined steel. The nozzle and the
coupler tip are included. Flex hose sold separately. Imported.
LEVER GREASE GUN
ITEM#: GUN
PISTOL GRIP GREASE GUN
ITEM#: PGUN
ITEM#:
PGUN
GUN
FLEX
12” FLEX HOSE
ITEM#: FLEX
DESCRIPTION:
PISTOL GRIP GREASE GUN
LEVER GREASE GUN
12” FLEX HOSE FOR GREASE GUN
CLASS # 44
MAGNETIC PARTS TRAY
These little 5-1/2” x 9” metal parts trays have plastic coated, magnetic
bottoms and will stick to any metallic areas such as a vehicle engine area, a
tool box, shop cart or any other work place. They will hold small metal tools
or parts such as nuts, bolts, screws, springs etc.
The powerful magnets hold parts securely inside whether horizontal or
vertical, even upside down! The plastic coating protects surfaces from being
scratched or marred. Imported.
ITEM#:
770
DESCRIPTION:
5-1/2” x 9” MAGNETIC PARTS TRAY
CLASS # 44
MICROMETERS AND CALIPERS
0” to 1” OUTSIDE
MICROMETERS
Rugged, forged steel frame with
a one piece, hardened spindle and
machined threads.
The knurled thumb screw clicks
when closed for accurate readings
to 100,000ths of an inch. Also has
a spindle lock for making multiple
measurements or for transferring a
measurement. The sleeve and thimble have a satin chrome finish as well as a
non-slip knurling. Imported.
VERNIER CALIPERS
These precision crafted, vernier
calipers will accurately measure to
1,000ths of an inch or millimeter.
It features two vernier scales so
it will read .001” or .002mm and is
crafted of stainless steel and a satin
chrome finish with microfine black
markings for precise measuring.
The sliding surfaces are raised,
preventing marring and graduation
wear, and the measuring faces are ground and lapped for accuracy. This unit
meets or exceeds all government specs for precision measuring instruments
and can be used for inside or outside measurements. Includes leather case.
ITEM#:
MICRO
CALIPER
DESCRIPTION:
MICROMETERS - 0” TO 1” OUTSIDE
CALIPERS - DUAL SCALE VERNIER
CLASS # 44
MISCELLANEOUS
22” MACHETE
Straight out of the jungles of Central
America, these authentic Panga type
machetes are used by gardeners, well
drillers, landscapers, excavators and
surveyors.
The wide blade is perfectly weighted
for swinging, which greatly reduces
fatigue and the wooden handles have
been riveted 6 times to hold up under
extreme use in any weather.
ITEM#:
675
DESCRIPTION:
22” ‘PANGA’ TYPE MACHETE
5-IN-1 NESTING TOOL
This handy tool is actually 5 common
tools in one neat, little package. It’s a
7-1/2” brass hammer with a screw off
bottom. Inside the handle are 4 multi
purpose screwdrivers that will fit just
about any small project.
It works just like the Russian nesting
dolls or ‘Babushka’ dolls; the smaller
screwdrivers nest inside of each other
and they all nest inside the hammer.
A perfect gift and very handy for any
toolbox.
ITEM#:
5IN1
DESCRIPTION:
5-IN-1 NESTING TOOL
CARPENTER’S PENCILS
These strong, long-lasting pencils are
a favorite with carpenters and other
construction companies.
They are flat to prevent rolling, even
on a sloped roof and the lead is made
to withstand the heavy marking even
on coarse wood.
These pencils feature the Ace toll free
number, are 7” in length and packed
72 per box.
ITEM#:
139
DESCRIPTION:
ACE CARPENTER’S PENCILS
2” PADLOCKS
These imported padlocks are built to
the same standards as ‘Master’ locks.
They feature the layered, bullet proof
plates that are heat treated and then
pinned eight times.
All brass tumblers are rustproof, and
the 2” x 3/8”, hardened steel shackles
are nearly impossible to cut through.
Includes 2 keys.
ITEM#:
663
DESCRIPTION:
2” HARDENED PADLOCKS
STEEL TRAILER AID
Never let a flat tire ruin your day. A
real handy, very simple device for all
tandem axle vehicles such as a horse
trailer, motor home or boat trailer.
Simply position the Trailer Aid in the
front or back of the good wheel, then
pull forward bringing the good wheel
onto the Trailer Aid. The flat tire can
now be changed without using a jack
even while your horse is still inside of
the trailer!
ITEM#:
333
DESCRIPTION:
STEEL TRAILER AID
MAGNETIC PICK UP TOOL
A powerful 5 Lb. magnet inside a
brass shield directs magnetic force to
the target and won’t grab unwanted
objects.
The eye of the magnet is an LED
light which makes locating the target
super easy. It is powered by 3 button
cell batteries which are included.
Has a 24” long, flexible shaft so it
can bend in any direction for hard to
reach places and a protective coating
for long life. Imported.
ITEM#:
896
DESCRIPTION:
MAGNETIC PICK UP TOOL W/ LED LIGHT
CLASS # 44
POCKET KNIVES & SHARPENER
EASY GRIP LOCK BACK KNIFE
This knife is built incredibly rugged and features a tactile
rubberized grip that resists slipping even when wet. The curve
of the handle fits your palm perfectly and increases control.
It has a stainless steel blade with a non-reflecting matte
finish and dual thumb posts for ambidextrous, easy opening.
Includes a durable, reinforced, ballistic nylon sheath with a
snap closure. This knife measures 8-1/2” long when opened
and 4-3/4” when closed.
ITEM#: 372
LOCK BACK SMALL POCKET KNIFE
This small pocket knife measures just 5-1/2” when open
and only 3” closed. It features a stainless steel blade with a
satin finish and rugged ABS handle with a rubberized insert,
steel pins and bolsters.
The handle has a clip to securely hold knife on a pocket
or belt as well as a hole for a keychain.
ITEM#: 373
TACTICAL KNIFE SHARPENING ROD
The Lansky tactical sharpening rod is a tough sharpening
rod that combines the speed of their proven tungsten carbide
sharpeners with the compact convenience of their diamond
retractable rod.
This easy to carry knife sharpener fits in your pocket so
you can keep it with you for fast blade maintenance. It has a
sturdy metal casing and a knurled, non-slip grip.
ITEM#: 371
CLASS # 44
COLOR CODED NAIL SET
This 3 pc. color coded nail set is made of hardened and tempered alloy steel with
shock absorbing and knurled rubber grips to prevent slipping. They’re excellent for
setting nails below the surface and include the three most popular sizes for almost
any size nails. Includes one each of 1/16”, 1/32” and 3/32”.
ITEM#:
PGNS
DESCRIPTION:
3 PC. COLOR CODED NAIL SET
CLASS # 44
LIGHTED DIGITAL TIRE GAUGE
Tires should be checked regularly to increase gas mileage and prolong the life
of the tire. This digital tire gauge has a lighted tip to easily attach to the stem of the
tire as well as a lighted dial to clearly see the reading.
Features an automatic shutoff after 30 seconds of idle time and reads in PSI,
BAR, and KPA. Sleek, ergonomic design with a ribbed, nonslip grip. For trucks,
cars and cycles.
ITEM#:
DLTG
DESCRIPTION:
LIGHTED DIGITAL TIRE GAUGE
CLASS # 44
12 PC. FOLDING WRENCH & KEY SETS
Made of chrome vanadium steel with anodized aluminum housings, these
handy, little folding hex key and folding wrench sets come on a hanging belt
clip and fold like a Swiss Army knife.
There are two sets in each kit and each clip carries six folding hex keys in
both metric and SAE or with Philips and flat screwdrivers and Torx bits. All
four of the hanging sets are color coded for easy reference. Import.
12 PC. FOLDING HEX KEY SET
• 6 pc. SAE (Red) - 5/64”, 3/32”, 1/8”,
5/32”, 3/16”, 1/4”
• 6 pc. Metric (Blue) - 2mm, 2.5mm,
3mm, 4mm, 5mm, 6mm
ITEM#: N12HK
__________________________________________
12 PC. FOLDING WRENCH &
SCREWDRIVER SET
• 6 pc. Torx (Yellow) -T10, T15, T20,
T25, T27, T30
• 6 pc. Screwdriver (Green) - 3mm flat,
5mm flat, 6mm flat, #1 Philips, #2
Philips, #3 Philips
ITEM#: N12SS
CLASS # 44
76 PC. HEXAGON TAP & DIE SET
Made of heat treated and tempered Tungsten alloy steel, this 76 piece tap
and die set covers National coarse and National fine threads and contains 34
taps and 34 hex dies.
Set includes two screwdriver pitch gauges, two ‘T’-handle tap wrenches,
one 5/8” hex die handle, a 1/8” to 1/2” capacity tap wrench, screwdriver and
it all comes in a heavy duty blow mold carrying case. Import.
Metric Sizes:
(size x thread)
3 x 0.5, 4 x 0.7, 4 x 0.75, 5 x 0.8, 5 x 0.9,
6 x 1, 7 x 1, 8 x 1, 8 x 1.25, 9 x 1, 9 x 1.25,
10 x 1.25, 10 x 1.5, 11 x 1.5, 12 x 1.75
SAE Sizes:
(size x thread)
4-40UNC, 6-32UNC, 8-32UNC, 10-24UNC,
10-32UNC, 12-24UNC, 1/4-20UNC,
1/4-28UNC, 5/16-18UNC, 5/16-24UNC,
3/8-16UNC, 3/8-24UNF, 7/16-14UNC,
7/16-20UNF, 1/2-13UNC, 1/2-20UNF,
1/8-28BSP, 1/8-27NPT
ITEM#:
N163
DESCRIPTION:
76 PC. ALLOY TAP & DIE SET
CLASS# 44
LARGE SCREEN DIGITAL CALIPERS
Neiko instruments are precision ground to exacting standards and used by
engineers all over the world. These digital calipers have the extra large, easy
to read 38mm x 14mm LCD screen and read in both metric and SAE.
They have fluid resistant stainless steel frames with a jaw depth of 15/16”
inside and 1-9/16” outside. The thumb roller provides a smooth and precise
movement of the digital head along the hardened, stainless steel arm and the
arm is also marked with large, easy to read millimeter markings. Metric/ISO
(International Standards Organization) and Whitworth conversion tables are
engraved on the back of the digital head.
The resolution is to .0005” and they are accurate to .001” (1/1000th of an
inch) and feature an automatic shut off. Includes one extra battery and foam
lined carrying case. Imported.
ITEM#:
N122
N123
N124
SIZE:
6”
8”
12”
DESCRIPTION:
LARGE SCREEN DIGITAL CALIPER
CLASS # 44
300 Lb. CAPACITY PVC UTILITY CART
These carts will haul around up to 300 lbs of material with ease on their
4” heavy duty, rubber castors which are all ball bearing, and have the ‘foot
push’ lock down levers, so the cart stays where you put it, loaded or not.
The body is 100% heavy duty, hard PVC, which is very sturdy under any
conditions, and absolutely dent-proof. You can bump these carts into almost
anything, and you won’t hurt them or damage anything you hit, because the
cart bodies are resilient like the popular Rubbermaid® products.
They have 2 large, leak proof shelves that are 4” deep, 18” wide and 28”
long with a 4-1/2” clearance from the floor. Available in black only. Import.
ITEM#:
345
DESCRIPTION:
300 LB. CAPACITY PVC UTILITY CART
CLASS # 44
STEEL TOOL BOX
Homak® tool boxes are designed for the professional as well as the home
handyman. This 24” tool box features industrial quality steel construction on
the body, frame, drawers and lid as well as the included tool tray.
It has a brown, wrinkle finish powder coated paint finish that resists rust,
corrosion and harsh weather conditions and a triple clasp system to keep lid
securely closed. Homak® tool chests are made for maximum durability.
•
•
•
•
•
Specifications:
Metal Thickness: 0.8mm
Width: 24-1/8”
Height: 9-3/4”
Depth: 8-5/8”
Weight: 14-1/2 Lbs.
ITEM#:
775
DESCRIPTION:
HOMAK 24” INDUSTRIAL TOOL BOX
®
CLASS # 44
18 DRAWER TOOL CHEST
BLACK WIDOW
Specifications:
W
D
H
4 Drawers - 37-1/4” x 16” x 1-7/8”
2 Drawers - 23-1/2” x 16” x 1-7/8”
1 Drawer - 23-1/2” x 16” x 7-3/4”
1 Drawer - 11-5/8” x 16” x 1-7/8”
1 Drawer - 11-5/8” x 16” x 13-3/4”
Weight - 145.1 Lbs.
W
D
H
3 Drawers - 11-5/8” x 16” x 1-7/8”
1 Drawer - 9-1/4” x 16” x 1-7/8”
4 Drawers - 23-1/2” x 16” x 1-7/8”
1 Drawer - 11-5/8” x 16” x 7-3/4”
1 Opening Top Tray - 41” x 16” x 1-7/8”
Weight - 218.3 Lbs.
ITEM#:
BW18TC
DESCRIPTION:
18 DRAWER BLACK WIDOW TOOL CHEST
CLASS # 44
BLACK WIDOW 14 DRAWER TOOL CHEST
This awesome tool chest was designed and manufactured exclusively for Ace
Industrial Supply and carries the raised panel ‘Black Widow’ logo on both the top
and bottom cabinets. It features 14 smooth gliding drawers and a sleek, glossy jet
black powder coated finish.
There is plenty of storage space in the wide drawers for a variety of tools and
parts including a locking ‘whiskey drawer’ on the top section. (Insert your favorite
libation here.) Includes 4 big 5” x 2” casters (2 swivel and 2 rigid), 2 large handles
for the bottom chest (must be installed by user for shipping purposes) a top lid for
extra storage and pads for each drawer. This tool chest is not available in stores or
online. Includes limited lifetime warranty.
Specifications:
Top Chest
Dimensions: 33”W x 17.7”D x 18.4”H
Weight: 99.9 lbs.
7 Drawers with lock (Including ‘Whiskey
Drawer’ with lock)
Top lid opens for more storage
Bottom Chest
Dimensions: 33.6”W x 18.1”D x 42.6”H
Weight: 167.3 lbs.
7 Drawers with lock
Materials and Construction
Powder Coated Steel
Full width aluminum drawer pulls
Molded chromed steel chest handles
Tubular locks and keys
2 pc gas struts
14 pair quick release, ball bearing slides
with load rate of 100 lbs. per pair
4 – 5” x 2” casters, (2 swivel, 2 rigid)
ITEM#:
BW14TC
DESCRIPTION:
BLACK WIDOW 14 DRAWER TOOL CHEST
CLASS # 44
60” WORK BENCH
This 60” wide work bench is made exclusively for ACE Industrial Supply under
our ‘Black Widow’ label. It is constructed of heavy gauge, cold rolled steel with a
black powder coated finish.
It features two locking drawers and a large workspace that is 60” wide x 26”
deep. There is also a large storage shelf at the bottom for keeping tools and
supplies off of the floor.
Specifications:
 2 Ball Bearing Slide Drawers w/ Locks
 Overall Width: 59”
 Overall Depth: 25.2”
 Overall Height: 34”
 Drawer Depth: 15.4”
 Drawer Width: 17.7”
 Weight: 116.6 Lbs
ITEM#:
DESCRIPTION:
BW60WB 60” BLACK WIDOW WORK BENCH W/ DRAWERS
CLASS # 44
BLACK WIDOW JOB SITE BOXES
These heavy duty job site boxes are made exclusively for Ace Industrial Supply
under our Black Widow label. They are constructed of heavy reinforced steel with
a rust resistant black powder coating and have recessed carrying handles.
They have tamper-proof locks and heavy gauge skid bolsters for moving with a
forklift and the lifting arms are smooth running and lock in place when lid is open.
These boxes are great for secure storage of tools, equipment and other items that
need to be left at the job site.
The 48” job site box is 48” L x 26.6” H x 24” W and the 36” box is 36” L x
19.1” W x 20.7” W.
ITEM#:
BW48JS
BW36JS
DESCRIPTION:
BLACK WIDOW 48” JOB SITE BOX
BLACK WIDOW 36” JOB SITE BOX
CLASS # 44
STEEL TOOL BOX
The Black Widow tool box is made exclusively for Ace Industrial Supply.
It is constructed of heavy gauge steel and features 3 easy slide ball bearing
drawers with foam liners.
The top of the box has two storage trays and two latches to keep it safely
shut and a built-in lock that latches from inside keeping all three drawers and
the lid securely locked.
Specifications:
Width: 20.5”
Height: 11.8”
Depth: 8.6”
Weight: 18.6 Lbs.
2 Keys Included
ITEM#:
775
DESCRIPTION:
BLACK WIDOW INDUSTRIAL TOOL BOX
CLASS # 44
76 PC. HOME REPAIR TOOL KIT
This handy kit has all the essential tools needed for home repairs and everyday
projects together in a canvas tote bag.
Includes a 13oz. claw hammer, 16’ tape measure, long nose pliers, adjustable
wrench, bit driver, 9” level, snap blade knife, assorted picture hangers, fasteners,
1/4” drive sockets and 1” driver bits.
ITEM#:
953
DESCRIPTION:
76 PIECE HOME REPAIR TOOL KIT
CLASS # 44
200 PC. HOME REPAIR TOOL KIT
This is a complete kit for almost any home repairs. It features a wide assortment
of tools in a folding carrying case.
Includes highly polished chrome vanadium SAE and metric sockets in both 3/8”
and 1/4” drive, a 13oz. claw hammer, tape measure, combination wrenches in sizes
from 5/16” to 9/16”, precision screwdrivers, a bubble level, various fasteners, hex
keys, pliers, adjustable wrench, various screwdriver insert bits with a ratcheting
screwdriver, a ratchet and a utility knife with blades.
ITEM#:
954
DESCRIPTION:
200 PIECE HOME REPAIR TOOL KIT
CLASS # 44
PIPE CUTTERS
3” CAPACITY PIPE CUTTER
This heavy duty, contractor’s
grade pipe cutter will cut any type
of metal pipe for any construction
application, up to 3” in diameter.
Features a rugged, malleable
steel frame, heat treated alloy steel
cutting wheel and two facing flare
groove collars.
A large PVC ‘T’-handle feed
knob allows for easy adjusting and
user comfort. Weighs 18 Lbs.
ITEM#:
646
DESCRIPTION:
3” CAPACITY METAL PIPE CUTTER
PVC PIPE CUTTER
This ratchet type pipe cutter is
designed for shearing PVC or plastic
pipe with one-handed operation. Just
squeeze, open and squeeze again.
Features heat-treated blades and
the hooked jaws hold the pipe firmly
in the right cutting position.
They’re designed to cut 1/2” and
3/4” pipe, and some thin wall 1”. The
maximum jaw opening is 1-1/4”.
ITEM#:
664
DESCRIPTION:
RATCHET TYPE PVC PIPE CUTTER
CLASS # 44
PIPE THREADING KITS
These two enclosed ratchet pipe threading kits have a capacity of up to 1”
or the larger kit with a 2” capacity, suitable for installation and maintenance
of pipe from 1/4” all the way up to 2”.
Constructed of high grade alloy steel which is heat treated to a hardness
rating of ‘Rockwell 60’. Each clearly marked chaser is mounted clockwise
into the die head in numerical order and can be reversed to accommodate a
bent or short pipe. Both sets include the die heads, the ratchet handle, and
carrying case. Imported.
PIPE THREADER KIT UP TO 2”
•
•
•
•
•
Includes:
1-1/4” Drop head die
1-1/2” Drop head die
2” Drop head die
24” Ratchet handle
ITEM#: 648
PIPE THREADER KIT UP TO 1”
•
•
•
•
•
•
•
Includes:
1/4” Drop head die
1” Drop head die
18” Ratchet handle
ITEM#: 645
ITEM#:
648
645
DESCRIPTION:
4 PC. PIPE THREADER KIT UP TO 2”
7 PC. PIPE THREADER KIT UP TO 1”
CLASS # 44
PUTTY KNIVES
Also called ‘filling knives’ they are used by painting contractors and
drywall contractors as well as plasterers for spreading spackling compound,
putty, plaster or sealants of any kind over holes or cracks. Simply put they’re
spatulas with PVC handles and flexible metal blades available in 6 different
widths that can be used for spreading or scraping material.
ITEM#: SIZE:
DESCRIPTION:
PK1
1”
PUTTY KNIFE WITH PVC HANDLE
PK2
2”
PK3
3”
PK4
4”
PK5
5”
PK6
6”
CLASS # 44
WINDOW SCRAPER & CARPET KNIFE
PRO GRADE WINDOW SCRAPER
This pro grade window scraper is very
handy for removing paint, putty, labels,
adhesives, and other items from mirrors,
windows, tiles and other flat surfaces.
The blade guard acts as a scraper and
it accepts standard utility knife blades. It
is made from heavy duty plastic and has
one utility blade enclosed.
ITEM#: PGWS
PRO GRADE CARPET KNIFE
This pro grade carpet knife is angled
for comfort and control and designed to
make quick and easy slices on carpeting.
No tools are required for changing
blade and the blade stores in the handle.
Heavy duty metal construction with one
blade included.
ITEM#: PGCK
CLASS # 44
POLY SAND BAGS & BAGGER
These are the toughest poly bags on
the market for filling with sand for use
during a flood or other emergencies.
They’re made from a tough, woven
polypropylene material that is tested to
1,600 hours of Ultra Violet light as well
as other severe weather conditions and
will not break down over long periods
of use.
They’re 14” x 26”, have a pull-tight
draw string to prevent leaking, and are
approved by fire departments and the F.E.M.A. emergency agencies. Packed
100 bags per box, but sold individually.
The ‘EZ-Bagger’ is perfect for
loading sandbags. It works with
both poly and burlap bags, and
is virtually indestructible. It is a
‘one person’ sandbag filler and
is lightweight and stackable.
ITEM#:
SAND
SANDFILL
DESCRIPTION:
POLY SAND BAG
EZ-BAGGER SAND BAG FILLER
CLASS # 44
NYLON SPRING CLAMPS
Nylon spring clamp jaws maintain very strong clamping pressure. The pivoting
tips of these clamps stay square on the work and apply even pressure and they are
perfect for hobbies, crafts, woodworking, shop, garage and hundreds of other uses.
They have comfortable, non slip handles and available in 2” or 3” jaw capacity.
Constructed of tough nylon and carry a manufacturer’s lifetime warranty.
ITEM#:
NSC2
NSC3
DESCRIPTION:
2” CAPACITY NYLON SPRING CLAMPS
3” CAPACITY NYLON SPRING CLAMPS
CLASS # 44
When you need the best, these are the professional standard for taps and
dies. They are American made from the toughest carbon steel, then precision
ground and heat hardened. Manufactured by Vermont American®, one of the
top machine tool companies in the Country.
Each tap and each die has the size and starting side permanently marked
on it. All of the taps are plug style and have the recommended drill size laser
etched on the side. The carrying case is constructed of sturdy, blow molded
plastic. Lifetime Replacement from the manufacturer.
The sizes listed below are for both the Taps and the Dies and set ranges
from 1/4” to 1/2”. ‘NC’ is National Coarse thread and ‘NF’ is National Fine
thread.
Set Includes:
Tap and Hexagon Die Sizes
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
4-40 NC taper
6-32 NC taper
8-32 NC taper
10-24 NC taper
10-32 NF taper
12-24 NC taper
1/4-20 NC taper
1/4-28 NF taper
5/16-18 NC taper
5/16-24 NF taper
¾
¾
¾
¾
¾
¾
¾
3/8-16 NC plug
3/8-24 NF plug
7/16-14 NC plug
7/16-20 NF plug
1/2-13 NC plug
1/2-20 NF plug
1/8-27 NPT pipe
1- Tap Adapter Driver for Tap Sizes 1/4” to 1/2”
1- Die Stock for 1” Round or Hexagon Dies
1- T-Handle Tap Wrench for Tap Sizes 0 to 1/4”
ITEM#:
DESCRIPTION:
VA21728 VERMONT AMERICAN 37 PC. TAP & DIE SET
CLASS # 44
WELDING MAGNETS
QUICK RELEASE
WELDING MAGNET
•
•
•
•
•
Easy on/off switch for quick
release of magnet
Work on angle, round, or square
stock
45 Lb. capacity
Hold at 45° or 90° angle
Imported
ITEM#: WMAG1
ADJUSTABLE ANGLE
WELDING MAGNET
•
•
•
•
•
Ideal for welding and assembly
applications
360° swivel angle
Each magnet holds up to 50 Lbs.
2-1/2” x 3-1/2” ceramic magnet
Imported
ITEM#: WMAG2
4 PC. MINI MAGNET SET
•
•
•
•
•
High gloss enamel end plates
Compact design
10 Lb. capacity each magnet
Holds work at 45°, 90° and 135°
angles
Imported
ITEM#: WMAG3
CLASS # 44
WINCHES
This 12 volt winch
will run off your car
or truck battery and
pull up to 1,500 lbs.,
which is enough to
get a vehicle up on a
trailer or out of a
ditch.
It can be mounted
on a bumper, on the
back of a truck or on
a trailer, and is great
when mounted on a
dock for pulling in a boat. They are not intended for overhead hoisting.
They’re equipped with 5/16” x 25’ steel cable and the power leads are 6’ in
length. Also features a remote switch for operating winch from a distance.
This manual crank
winch can be bolted
almost anywhere for
easy and convenient
loading or unloading
of vehicles or a boat
on a trailer and they
can also be mounted
to the top of an ‘A’
frame for pulling or
hoisting.
They have a 1,200
Lb. pulling capacity,
3-1/2” safety hook,
and a 4 to 1 rewind ratio. The attached 1/4” aircraft cable is 30’ long and the
pulling mechanism has internally lubricated drum bushings. Heat treated and
zinc plated to prevent corrosion. Imported.
ITEM#:
DESCRIPTION:
AE116 1,500 Lb. 12 VOLT ELECTRIC WINCH
632
1,200 Lb. HAND CRANK GEARED WINCH
CLASS # 44
WIRE BRUSHES
WOOD HANDLE TOOTHBRUSH
ITEM#: 679
•
•
•
•
•
Wood Handle
7 x 3 rows of wire bristles
8” long
Hanging hole on handle
Imported
PLASTIC HANDLE TOOTHBRUSH
ITEM#: 678
•
•
•
•
•
Plastic Handle
7 x 3 rows of Stainless wire bristles
8” long
Imported
WOOD SHOE HANDLE BRUSH
ITEM#: 668
•
•
•
•
•
•
ITEM#:
679
678
668
Hardwood Handle
10 x 5 rows of wire bristles
10” long
Tapered handle fits palm and
reduces fatigue
Imported
DESCRIPTION:
WOOD HANDLE WIRE TOOTH BRUSH
PLASTIC HANDLE WIRE TOOTH BRUSH
10” WOOD SHOE HANDLE WIRE BRUSH
CLASS # 44
HARDCORE WIRE BRUSH
These wire brushes make easy work of the most demanding projects. The
rust resistant wires are staple set in an ergonomically designed block, made
to maximize paint removal and surface preparation with minimal effort.
The block is constructed of sturdy foam plastic which provides strength
and light weight. The bristles are 4 x 19 rows of extremely rigid wire ready
to take on the heaviest job, and they feature a 3” wide steel scraper.
ITEM#:
BW01450
DESCRIPTION:
PERFECT PREP WIRE SCRAPER
CLASS # 44
BARREL PUMP
These barrel (drum) pumps provide a steady flow of oil, diesel fuel, gas,
or other non-corrosive liquids from almost all containers with a 2” bunghole.
The bung adaptor is adjustable for various heights and the pump has a 40”L
by 1-1/8”D suction pipe with a 1” outlet.
Dispenses about 10 GPM (gallons per minute) and is bi-directional. Just
turn the handle a few times to prime the pump or to act as a siphon. Made of
cast iron for handling petroleum products and light oils. (Not recommended
for water or corrosive materials.) Import.
ITEM#:
975
DESCRIPTION:
HAND CRANK BARREL PUMP
CLASS # 44
TIRE GAUGES
TRUCK TIRE GAUGE
These are heavy duty, 12” tire pressure
gauges for trucks. They have an angle
head to assist the proper flow of air to
the tube stem, no matter how bent or
deformed.
They read from 10 to 160 PSI in 2 lbs.
and units on the reverse side read from
60 to 1100 KPA in 20 KPA units. They are chrome plated and have a sliding
steel ring on them, so that they can be hung anywhere. They’re calibrated to
50 lbs. PSI.
PENCIL TIRE GAUGE
These are heavy duty, 8” tire pressure
gauges for cars. They have an angle head
to assist the proper flow of air to the tube
stem, no matter how bent or deformed.
The gauge is calibrated to lbs. & kgs. and
it has a clip for pocket or visor.
ITEM#:
TTG
PTG
DESCRIPTION:
TRUCK TIRE GAUGE
PENCIL TIRE GAUGE
CLASS # 44
120 PC. AUTO FUSE ASSORTMENT
These are the newer type of fuses that have been used in most vehicles,
both foreign and domestic, since 1980. They have the two flat prongs with a
plastic, color coded head.
This kit has 20 each of the 6 most often used fuses: 5, 10, 15, 20, 25, &
30 Amp. They are all separated in a convenient plastic storage case and are
color coded for easy replacement. Don’t be caught on the road without them!
Import.
ITEM#:
FUSE
DESCRIPTION:
120 PC. AUTO FUSE ASSORTMENT
CLASS # 44
120 PC. MINI FUSE ASSORTMENT
This 120 piece set contains the seven most commonly replaced fuses in
today’s cars, trucks and SUV’s. These are mini fuses; 10.9 x 3.6 x 16.3 mm
and are color coded for easy identification. A divided plastic storage box is
included.
These are mini fuses and are smaller than standard auto fuses. They are
not to be confused with ‘low-profile’ fuses which have a much shorter blade
length.
Contents:
(10) 5 amp
(10) 7.5 amp
(20) 10 amp
(20) 15 amp
(20) 20 amp
(20) 25 amp
(20) 30 amp
ITEM#:
FUSEM
DESCRIPTION:
120 PC. MINI FUSE ASSORTMENT
CLASS # 44
100 PC. ANCHOR KIT
These all purpose plastic wall anchor kits include 100 plastic anchors, 100
1-1/4” x #10 self tapping screws and a 1/4” carbide masonry bit in a divided
plastic box.
They are very simple to use; just drill a 1/4” hole in the wall with the 1/4”
bit, included, insert the anchor and the screw. As the screw is tightened, the
anchor spreads apart on the opposite side of the wall making a sturdy mount
that will not pull out.
Used for hanging pictures, mirrors, decorations, cabinets or anything else
that needs to be mounted firmly and safely to the wall. Imported.
ITEM#:
100PC
DESCRIPTION:
100 PC ANCHOR KIT W/ 1/4” DRILL BIT
CLASS # 44
108 PC. HEX SHANK DRIVER BIT SET
This 108 piece hex shank driver bit set has all the bits you’ll ever need all
in one handy assortment. Made of tough, chrome vanadium steel and comes
in an 18 compartment, ABS plastic box. Import.
Includes:
•
•
•
•
•
•
ITEM#:
BITS
Phillips: 6 each #1, #2 and #3 head
Slotted: 6 each 4.5mm, 6mm and 7mm
Torx: 6 each T10, T15, T20, T25, T30 &T40
Pozi-Driv: 6 each Pz1, Pz2, and Pz3
Hex: 6 each 4mm, 5mm and 6mm
Plastic divided organizer case.
DESCRIPTION:
108 PC. HEX SHANK DRIVER BIT SET
CLASS # 44
110 PC. HYDRAULIC GREASE FITTINGS
This is a big assortment of the most popular grease fittings for almost any
application.
All fittings are heat treated, plated and polished to prevent corrosion and
rust. 110 fittings in all in a divided, plastic storage box. Imported.
SAE Includes:
•
•
•
•
•
•
•
30 Pc. - Straight 1/4”-28
15 Pc. - 45° 1/4”-28
15 Pc. - 90° 1/4”-28
15 Pc. - 90° 1/8”-NPT
15 Pc. - 45° 1/8”-NPT
20 Pc. - Straight 1/4”-NPT
Divided Storage Case
Metric Includes:
• 30 - Straight M6 Grease
Zerk Fitting
• 20 - 90° M6
• 20 - Straight M8
• 20 - Straight M10 Grease
Zerk Fitting
• 10 - 90° M8
• 10 - 90° M10 Grease Zerk
Fitting
• Divided Storage Case
ITEM#:
DESCRIPTION:
976
110 PC. HYDRAULIC GREASE FITTINGS - SAE
976M 110 PC. HYDRAULIC GREASE FITTINGS - METRIC
CLASS # 44
17 PC. AUTO LAMP BULBS
These are the most popular bulbs for almost any automotive application.
They are the bayonet type, replacement bulbs for turn signals, back up, tail
light, and interior vanity lights, like in the glove box and interior door lights.
INCLUDED:
All 12 Volt bulbs: (2) #53, (2) #57, (2) #194, (2) #67, (1) #1003, (1) #1073,
(1) #1141, (1) #1034, (2) #1157, and (3) #2057
ITEM#:
LAMP
DESCRIPTION:
17 PC. AUTO LAMP ASSORTMENT
CLASS # 44
LOCK NUTS & WING NUTS
150 PC. LOCK NUT
ASSORTMENT
The nylon inserts inside these steel
lock nuts assure a secure, tight fit on
high vibration areas, vehicles, small
engines, etc. Includes plastic divider
box.
Sizes:
(25) #10-24, (35) 1/4”-20, (25) 1/4”-28,
(30) 5/16”-18, (25) 3/8”-16, (10) 1/2”-13
150 PC. WING NUT
ASSORTMENT
These high grade wing nuts are easy
to use, simply tighten them by hand, no
tools needed. Includes plastic divider
box.
Sizes:
(30) 3/16”-24, (30) 3/16” x 32, (25) 1/4”-20,
(25) 1/4”-28, (20) 5/16”-18, (20) 5/16”-24
ITEM#:
DESCRIPTION:
LOCKNUT 150 PC. NYLON LOCKNUT ASSORTMENT
WING
150 PC. WINGNUT ASSORTMENT
CLASS # 44
MINI TORCHES
BUTANE MICRO TORCH
This butane micro torch will heat up to
1,300° Celsius (2,370° Fahrenheit). It’s great
for melting gold, silver or copper and can be
used for bending plastic pipe or fusing metal
plastic, or rubber materials.
They are used in emergency soldering,
electronic repair, jewelry repair and around
the house, or for camping or barbeque.
It is refillable with any butane and has
a burn time of up to 3 hours when full.
ITEM#: 875
BUTANE PENCIL TORCH
This handy torch also burns at 1,300°
Celsius, (2,370° Fahrenheit) and is also great
for melting gold, silver or copper but it has
a much shorter burn time of just 30 minutes
continuously.
It can be easily refilled with any butane
and is no bigger than a pencil.
ITEM#: TORCH
ITEM#:
875
TORCH
DESCRIPTION:
BUTANE MICRO TORCH
BUTANE PENCIL TORCH
CLASS # 44
MISCELLANEOUS AUTOMOTIVE
STEERING WHEEL LOCK
These keyed locking bars attach to
any vehicle’s steering wheel to help
prevent opportunity theft.
They are completely adjustable to
fit any type steering wheel and made
of heavy duty, quality steel covered
with PVC to prevent marring.
They are impervious to sawing or
grinding through yet simple to install
and remove. Includes 2 keys. Import.
ITEM#: COP
MECHANIC’S SONARSCOPE
This is a stethoscope for mechanics.
It quickly helps locate the source of
any engine noise.
You can trace the sound of flowing
water, oil, gas, or steam and identify
piston ‘slap’, faulty valves, or gasket
failure.
The handle is shockproof and there
are two different length probes, a 4”
and an 8”. Imported.
ITEM#: 950
CLASS # 44
48 PC. POWER BIT SET
This is the most useful set of driver, drill, and socket bits that you’ll ever
own. Includes all the popular sizes of phillips, hex, torx and square drive bits
all 2” long, as well as 7 nut driver bits from 3/16” to 7/16”, 5 drill bits from
1/16” to 3/16”, three 1/4” screw finders, a 4” extension holder, and one 1/4”
drive, 2” socket adaptor.
All 48 bits are neatly stored in a heavy duty, plastic carrying case that’s
easy to keep organized. The bits are made from heat treated M2 high speed
steel, and chrome vanadium plated. Imported.
ITEM#:
977
DESCRIPTION:
48 PC. POWER BIT ACCESSORY SET
CLASS # 44
HOBBY KIT & GLUE GUN
This hobby kit by Homak® has everything you need for crafting packed in
a sturdy, compact carrying case that measures 11-3/4” x 9”. The kit includes
an electric glue gun with glue, a 5-in-1 hammer with a screwdriver set, small
and large handle hobby knives, a spring clamp, tweezers, sanding block, 22
specialty blades, an edger and a planer.
ITEM#:
HA36HK
DESCRIPTION:
36 PIECE HOBBY KIT WITH GLUE GUN
CLASS # 44
WIRE BRUSH SET - 38 PC.
This 38 piece industrial wire brush set is used for cleaning and polishing
a variety of different materials. Ideal for machining and auto repair, opening
clogged parts, scouring cylinder head volt holes, removing the bead sealing
area of oxidized aluminum rims, or cleaning corroded light sockets, pipes,
battery terminal clamps and even guns.
Includes 12 sizes each of brass, stainless steel and nylon brushes (8mm 19mm) with a 1/4” hex shank, one 6” quick release extension bar, one 5-3/4”
quick release soft handle and comes in a convenient plastic carrying case.
ITEM#:
N830
DESCRIPTION:
38 PC. INDUSTRIAL WIRE BRUSH SET
CLASS # 44
8’ CHARMING WINDMILL
These are 8’ high, steel replicas of real working windmills seen on farms
and in yards across America. They are real working, whisper quiet, and the
perfect decorative touch to any garden or yard.
Twelve durable steel blades in an old world design are plated for lifetime
resistance to outdoor elements. The turning axle is all ball bearing for almost
soundless operation and they have a wind ‘direction finding’ blade that will
always give you the true wind direction and keep the blades turned into the
wind.
They have a stylized tapered stand that is 6’ high and over 2’ wide at the
base and comes with four stabilizing corner stakes. The bladed wheel is over
2’ in diameter and colorfully tipped with a red stripe giving these charming
windmills an old world elegance and a personal touch to any yard. Imported.
44 lbs.
ITEM#:
893
DESCRIPTION:
8’ CHARMING WINDMILL
CLASS # 44
TOOL POUCHES, BELTS & KNEE PADS
These tool pouches and belts are designed for professionals and made to last for
years. They’re constructed of rugged polyester fabric with heavy duty steel rivets
and nylon stitching as well as hard molded pockets that keep a firm hold on tools
job after job. Perfect for electricians, drywallers, lathers, maintenance experts and
contractors.
21 POCKET ELECTRICIANS POUCH
• Double layer of rugged, lightweight 600D
polyester fabric.
• Zippered top flap to prevent spillage of
tools when not in use.
• Ergonomic rubber handle and padded
shoulder strap design for easy storage and
the ideal way to carry loaded tool pouch.
• Zippered back pocket for 8" x 5" writing
pad.
• Outside pocket to hold cell phone holder
and 3 outside large screwdriver holders.
ITEM#: CLC1509
SMALL ZIP TOP UTILITY POUCH
• Double-pull zipper cover secures parts and
tools while able to accommodate longer
items.
• Snap-back feature helps keep cover out of
the way.
• Slots, sleeves and straps to accommodate a
variety of hand tools.
• Carabiner and tape clip.
• Clip on or fits belts to 2-3/4” wide.
ITEM#: CLC1523
MEDIUM ZIP TOP UTILITY POUCH
• Double-pull zipper cover secures parts and
tools while able to accommodate longer
items.
• Snap-back feature helps keep cover out of
the way.
• Slots, sleeves and straps to accommodate a
variety of hand tools.
• ‘J’-clip, tape strap, and measuring tape clip.
• Clip on or fits belts to 2-3/4” wide
ITEM#: CLC1524
15 POCKET CENTER TRAY TOOL BAG
• 13-1/2” x 9” multi-compartment plastic tray
included, stored in middle compartment for
easy access to the rest of bag contents.
• 8 pockets outside and 7 pockets inside to
organize a wide range of tools and
accessories.
• Main pocket with web loops accommodates
large hand tools.
• Extra padded carrying handles and a fully
adjustable shoulder strap.
• Metal tool snap and electrical tape strap.
• 16”L x 9”W x 9”H
ITEM#: CLC1529
21 POCKET SOFT SIDED TOOL BAG
• Removable and adjustable metal frame
partition slides securely into place to
customize tool box to your storage needs.
• Plastic reinforced internal pocket for utility
knife or other tools.
• Sturdy metal handle bar with molded foam
grip for easy carrying.
• 21 Multi-use pockets and 10 webbing loops
to organize a wide range of tools and
accessories.
• Adjustable padded shoulder strap.
• 14”L x 11”W x 11”H
ITEM#: CLC1578
23 POCKET 5 PC. COMFORTLIFT BELT
• Made of double layered 600D polyester
fabric.
• Completely adjustable, padded suspenders
engineered to hold and distribute weight
comfortably.
• Easy Carry Handle design provides for
simple adjustments and easy storage
without spilling contents.
• One size fits most.
ITEM#: CLC1614
18 POCKET CARPENTER’S COMBO
• Easy Carry Handle design provides simple
adjustments, easy carrying and storage of
apron without spilling contents.
• Totally versatile-all parts removable and
interchangeable.
• Stay-Open feature on main pockets.
• 9 Main pockets for tools/nails,etc.
• 6 Smaller pockets for screwdrivers, cutters,
pliers, pencils, etc.
• Speed Square and pry bar holders.
• 2 Steel hammer loops.
• Metal clip holds all measuring tape sizes.
• 5" Wide padded comfort belt with double
tongue steel roller buckle.
• Fits waist sizes 29" - 46"
ITEM#: CLC5605
FLOORING KNEEPADS
• Constructed of Heavy-Duty Ballistic
polyester fabric and binding.
• Buckle-style fastening system with
web/elastic adjustable straps for a secure fit.
• High-Density, closed-cell foam inner pad
for all-day comfort.
• Applications: Wood-Flooring, Gardening,
Plumbing, HVAC and Carpentry.
ITEM#: CLC342
CLASS # 44
EMERGENCY LED LIGHT & RADIO
This amazing emergency light needs no batteries. Simply turn the crank
handle for one minute and the LED light will remain lit for up to 30 minutes
or the radio will play for 10 to 12 minutes allowing for emergency broadcast
information or any other AM or FM radio broadcast.
This is a very portable and hand held device that will easily fit in a tool
box, glove compartment, drawer, or any other location for quick access in an
emergency such as earthquake, fire, flood or power outage. And because the
power is manipulated with the hand crank, you’ll never have to worry about
replacing batteries or having fresh batteries when you need them the most.
Features a rugged ABS body, 3 bright LED lights, radio with AM/FM,
volume and tuning dials. Imported.
ITEM#:
AE138
DESCRIPTION:
EMERGENCY LED LIGHT & RADIO
CLASS # 44
VARIOUS ASSORTMENTS
These are various assorted kits for automotive and machine repair shops.
They have universal applications for almost any business, home, farm, or a
variety of other uses. Hobbyist cannot be without these, especially those who
collect and race slot cars, model airplanes etc.
555 PIECE COTTER PIN
SET
Cotter pins are for holding
linkage and armatures together
and are also used for wheel
bearings.
Zinc plated, Sizes: 1/16” x 1”,
3/32” x 1”, 3/32” x 1-1/2”,
1/8” x 1-1/4”, 1/8” x 2”, and
5/32” x 2-1/2”
ITEM#: COTT
_____________________________________________
300 PIECE ‘E’ CLIP SET
‘E’ Clips fit into cut out grooves
and are spring loaded. They are for
holding parts together in
automobiles, motorcycles, boats,
and trucks.
Sizes: 3/8”, 1/4”, 1/2”, 3/16”, 1/16”,
1/8”, 7/8”, 5/8”, and 3/4”
ITEM#: ECLIP
____________________
CLASS # 44
VARIOUS ASSORTMENTS
150 PC HAIR PIN
ASSORTMENT
These are also known as ‘Hitch
Pins’ or ‘Quick Release Cotter
Pins’ Also another popular
fastener for machine repair of all
kinds and hobby shops.
Sizes: 5/32” x 2-5/16”, 9/64” x 13/4”, 3/64” x 1-5/8”, 5/64” x 15/16”, and 3/32” x 1-3/16”
ITEM#: HAIR
_____________________________________________
315 PC ROLL PIN
ASSORTMENT
These are press fit into parts to
hold them together. Made of spring
steel and used by machine shops,
appliance repair, automotive, etc.
Sizes: 7/8”, 1”, 1-1/2” x 5/32”
diameter, 1/4”, 1/2”, 1” x 5/64”
diameter, 3/16”, 3/4”, 5/16” x
1/16” diameter, 5/8”, 1”,
1-1/4” x 1/8” diameter, 5/8”, 11/4”,
1-3/4” x 1/4” diameter, 3/4”, 11/2”, 2” x 5/16” diameter, 3/4”, 11/2”, 2” x 3/8” diameter, 5/8”, 11/4”, 1-3/4” x 7/32” diameter,5/8”,
1”, 1-1/4”x 3/16” diameter
ITEM#: ROLL
____________________________________
CLASS # 44
VARIOUS ASSORTMENTS
300 PC SNAP RING
ASSORTMENT
These are internal and external
snap rings, also known as retaining
rings. Auto repair, truck repair and
machine shops use these frequently.
Sizes: 1-1/4”, 1”, 13/16”, 7/8”, 9/16”,
7/16”, 5/16”, 5/8”, 1/4”, 3/4”, 1/2”,
3/8”
ITEM#: SNAP
_____________________________________________
200 PC SPRING
ASSORTMENT
These are the most common
springs in both the ‘push’ and the
‘pull’ styles. Any machine repair,
or hobby shop has a use for these.
Sizes: All the most popular sizes
from 1/2” to 3-1/8” in length.
ITEM#: SPRING
____________________________________
CLASS # 44
VARIOUS ASSORTMENTS
720 PC. WASHER
ASSORTMENT
Zinc plated to prevent rust and
this kit covers all the popular sizes
for machine shops, auto, truck and
boat repair shops.
Sizes: #6, #8, #10, 1/4”, 5/16”, 3/8”
ID
ITEM#: WASH
_____________________________________________
CLASS# 44
WING NUTS / WIRE NUTS
These Marrette twist on wire connectors are American made by Thomas
& Betts the leading name in electrical connectors. Their unique inner spring
and cap grip make them the first choice of professional installers across the
country.
The external cap is tough polypropylene and 105° ‘C’ rated to withstand
incredible pressures. They have close-spaced, deep grooves for real twisting
power, even with greasy or oily hands and have a deep, wide throat for total
insulation coverage. The throat is threaded to guide large wire into the spring
chamber.
A copper coated inner spring expands to accommodate more wires with
less twisting effort than a fixed spring wire nut, and they are color coded for
easy size selection. Available in standard, winged and grounding nuts that let
one end of the wire come through for grounding applications.
Standard Wire Nuts
ITEM:
WN330P
Winged Wire Nuts
Grounding Nuts
DESCRIPTION:
BLUE WIRE NUTS
QTY:
100
WN331KP ORANGE WIRE NUTS
WN331M ORANGE WIRE NUTS
500
1,000
WN333KP YELLOW WIRE NUTS
WN333M YELLOW WIRE NUTS
500
1,000
WN335D
RED WIRE NUTS
WN833KP YELLOW WINGED WIRE NUTS
WN833M YELLOW WINGED WIRE NUTS
WN739P
BIG BLUE WINGED WIRE NUTS
WN1410P
GREEN GROUNDING NUTS
500
500
1,000
50
100
CLASS # 44
UNIVERSAL LOCKOUT TOOL
Don’t get locked out of your vehicle again! This is an all in one Universal
Lockout set just like the ones used by the Auto Club or the Repo Man. It is a
complete set designed to work on most cars or trucks.
The set includes the thin barwide bar, a wire form ‘S’ hook, a slide lock
tool, a wonder tool, a plastic coat hanger, 2 piece wedges and a universal gas
cap tool.
It’s very simple to use and will get that car or truck door open in a jiffy,
where a tow truck driver will commonly charge about $50.00 to do the same
thing! It works on foreign and domestic cars and trucks and is a great item
for just about anyone; just don’t lock it in your car!
ITEM#:
ULT
DESCRIPTION:
UNIVERSAL LOCKOUT TOOL KIT
CLASS # 44
LOCKOUT TOOL INFLATABLE WEDGE
This handy device is used in tandem with a universal lockout tool. Simply
wedge the bag between the door and the door frame or the weather stripping
and the window then squeeze the hand pump. This allows enough space to
insert a lockout tool and easily unlock the door. Import.
ITEM#:
N180
DESCRIPTION:
LOCKOUT TOOL INFLATABLE WEDGE
CLASS # 44
PLASTIC KEY TAGS
These plastic key tags are used to identify keys at auto shops, body shops and
car and truck dealers. The self locking design keeps keys secure and they feature a
large writing surface for easy marking and identification with ink or pencil.
Holes are fully punched out, eliminating ‘chads’ and they’re perfect for quick
tagging in busy service areas. Available in red, blue, white and yellow and packed
1,000 per box. Priced per 1,000.
ITEM#:
P9933RD
P9933BL
P9933WT
P9933YW
DESCRIPTION:
PLASTIC KEY TAGS (1,000)
COLOR:
RED
BLUE
WHITE
YELLOW

class # 44 super view digital caliper

Transcription

Similar documents

Marvel Outdoor Mobile Beer Dispensers

Brochure SFBM.indd - Werkhuizen Hengelhoef Industrial Contracting

Taco : Where Toys and Sports Are King, 1970

Johnny Tremain by Esther Forbes Objectives

HANOMAG SdKfz 251 D

PLUMBING GENERAL SERVICE TELECOMMUNICATIONS HVAC #1

6Clit Pi3349 opeciattg dough.

to now. - Kugel Komponents

End-matchEr - Stiles Machinery

Corrosion of Steel in Concrete