Online Catalog

Transcription

Online Catalog

To Our Customers:
On behalf of myself and the people of ProFab Corporation, I would like to extend
our thanks for the opportunity to serve you and your company in your fabrication
and machining requirements. Here at ProFab, we strive to work with you at a very
personal level, yet still maintain the professionalism needed to provide our
customers with the highest quality product available. Our fabrication is performed
with the craftmanship of yesteryear, while machining is precisely calibrated to meet
today’s ever-changing requirements.
This catalog, we hope will aid you in your selection of the product to best serve
your needs. We have endeavored to provide a complete catalog. If, however,
additional information is needed, please feel free to call on us. We welcome every
opportunity to offer our service and expertise in fabrication and machining.
Let me again say “Thanks” for your business and please remember, at ProFab
Corporation Inc, our primary purpose is to be of service to you and your company.
Best Wishes,
Randall Wright
President
PROFAB
CORPORATION INC.
MISSION STATEMENT
OUR VISION FOR PROFAB’S FUTURE IS ANCHORED IN THE SAME VALUES WHICH HAVE GUIDED
PROFAB IN THE PAST.
STRETCHING FROM OUR ORIGIN IN 1980 INTO THE FUTURE, THESE
VALUES ARE THE BASIC BELIEFS OF OUR ORGANIZATION.
THE MISSION OF PROFAB CORPORATION INC. IN LUBBOCK, TEXAS
SHALL BE:
I.
TO BE THE PREMIERE FABRICATION AND MACHINING INSTITUTION OF OUR INDUSTRY. To be
committed to excellence and integrity, and to deliver quality products and personalized service to our
customers.
II.
TO RECOGNIZE THAT PROFAB CORPORATION INC’S MOST IMPORTANT ASSET IS ITS CUSTOMER
BASE. We are in business because of our customers. Our products are designed to meet the fabrication
and machining needs of our customers. Our employees are expected to meet the needs of our customers
in a professional, prudent and personable manner. High quality product and exemplary service is the true
mission of the PROFAB CORPORATION INC.
III.
TO BE A RESPONSIBLE EMPLOYER. The second most important resource of PROFAB is its employees.
Without dedicated and responsible employees, it is impossible for PROFAB to render high quality products
and customer service or to be a responsible citizen of the community. All employees will be treated with
dignity and respect, and will be given equal opportunity with respect to race, color, sex, age, religion, or
physical handicap.
IV.
TO RECOGNIZE THAT WE LIVE IN A DYNAMIC SOCIETY AND THAT WE ACCEPT OUR SOCIAL
RESPONSIBILITY AND COMMUNITY INVOLVEMENT. PROFAB CORPORATION INC. is a responsible
citizen and a business leader of our community. PROFAB takes is citizenship duties seriously, and it will
not knowingly take any action that adversely affects the best interest of our city, state, country, its business
community, or its families.
V.
TO ACCEPT THE RESPONSIBILITY TO OURSELVES, OUR CUSTOMERS, AND OUR EMPLOYEES.
In order to achieve this, PROFAB must make a profit on the products and services it provides. Without this
profit PROFAB cannot provide its customers the service and quality they deserve, it can not provide the
employees the work opportunity they need, nor can it provide the community with the financial support that
employment and manufacturing creates.
VI.
TO CONDUCT ALL OF OUR AFFAIRS IN AN OPEN AND FORTHRIGHT MANNER AND INSIST UPON
HONESTY IN DEALING WITH OUR CUSTOMERS AND OURSELVES.
THE FOLLOWING SUMMARIZES THE MISSION OF THE PROFAB CORPORATION INC. IN LUBBOCK,
TEXAS.
THE MISSION OF THE PROFAB CORPORATION INC. IS TO MAINTAIN ACCEPTABLE
EARNINGS BY RENDERING HIGH QUALITY CUSTOMER SERVICE, HIGH QUALITY PRODUCTS, AND
SERVING AS A RESPONSIBLE CITIZEN IN THE BUSINESS COMMUNITY THROUGH THE EFFORTS
OF EQUITABLY TREATED EMPLOYEES.
Limited Warranty
Subject to the terms and conditions set forth below, ProFab Corporation Inc. warrants that its
fabricated equipment is free form defects in workmanship and materials for one (1) year from date
of purchase or for thirty (30) days from date of installation, whichever occurs first. This warranty
extends only to the original purchaser. All subsequent purchasers are excluded.
ProFab Corporation Inc. obligation under this warranty is expressly limited to replacing or
repairing, free of charge, F.O.B. point of manufacture, any defective part or parts of its fabricated
equipment, and such remedy shall be exclusive. All parts claimed defective must be delivered to
its factory in Lubbock, Texas freight prepaid. Goods may not be returned to factory without written
authorization.
Every claim under this warranty shall be deemed waived unless made in writing and received by
ProFab Corporation Inc. within one (1) year from date of purchase or thirty (30) days from
installation, whichever occurs first. ProFab Corporation Inc. shall not be liable for repairs or
replacement parts which are made outside the factory without prior written approval.
PROFAB CORPORATION INC. MAKES NO OTHER REPRESENTATION OR WARRANTY OF
ANY KIND, EXPRESS OR IMPLIED, IN FACT OR IN LAW, OTHER THAN THE EXPRESS
LIMITED WARRANTY SET FORTH HEREIN. PROFAB CORPORATION INC. SPECIFICALLY
DISCLAIMS ALL OTHER EXPRESS OR IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL PROFAB CORPORATION
INC. BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES RESULTING,
DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS OF USE OF THE MANUFACTURED
EQUIPMENT.
This warranty contains the entire warranty relating to the manufactured goods of ProFab
Corporation Inc. and no conduct, oral statements, or representations not contained in this
warranty shall have any force or effect or be deemed a waiver thereof. This warranty shall not be
modified in any way except in writing and signed by an authorized representative of ProFab
Corporation Inc.
This warranty, and any liability of ProFab Corporation Inc., hereunder, shall be governed by,
construed, and enforced in accordance with the laws of the state of Texas to the fullest extent
allowed by applicable law. This warranty gives you specific legal rights which may vary state to
state.
POLICY &
CONDITIONS OF SALES
PRICING:
All prices are subject to change without notice and all shipments will be invoiced at the price in
effect at the time of shipment.
Pricing of items not covered by the Price & Data Catalog must be referred to the factory.
TERMS OF PAYMENT:
Terms of payment are cash in full, in United States of America currency, Discount 2% - 10 days, net
30 days, with approved credit. All accounts over 30 days will bear interest at the maximum rate
allowed by law.
All orders are subject to the approval of the Seller’s Credit Department and the seller may require
full or partial payment in advance.
TAXES:
The buyer shall reimburse the seller for any sales, use , occupation, excise or similar tax arising
out of the sale, upon receipt of the seller’s invoice for the amount of the tax or shall provide the
seller with a tax exemption certificate acceptable to the appropriate authorities.
PENALTY CLAUSE:
No penalty clause of any description is acceptable unless approved in writing by an officer of the
PROFAB CORPORATION.
QUOTATIONS:
Formal written quotations shall be subject to the Company’s Policy & Conditions of Sales and
shall be valid for a period of 45 days at which time they shall expire. PROVIDED that said offers
may be revoked or modified by PROFAB CORPORATION at any time prior to acceptance.
Oral quotations shall be made “subject to the Company’s terms, conditions, and price provisions“
and expire, unless accepted, the same day.
Page 1 of 3
ORDERS:
All orders received by telephone are subject to receipt of a purchase order by mail to insure correctness of the oral order. The Company shall not be liable for errors in any orders given orally.
CANCELLATION and/or CHANGE ORDER CHARGES:
Cancellation of orders will be accepted only upon payment of reasonable cancellation charges
which shall include and take into account all costs and expenses incurred and commitments made
in connection with the canceled order.
Changes to orders entered for PRODUCTION will be accepted only if actual PRODUCTION has not
started or in cases where PRODUCTION has started, upon payment of the cost incurred to the
seller through such change order.
DELIVERY and ROUTING:
All prices are F.O.B. Lubbock, Texas.
If routing of shipments is specified by the customer’s order it will be
followed whenever practical, otherwise, points of origin, the methods of transportation, and routing of shipments are optional to the seller.
Title of goods shall pass to buyer when delivered to the shipping agent. The seller cannot be held
responsible for any damage incurred by the transportation services, but will gladly provide assistance in securing claim adjustments upon request.
The seller will not be responsible for any delay or failure to meet a shipment date caused by
circumstances beyond the reasonable control of the seller or others, including but not limited to
the following: Acts of God, the government or public enemy, riots, or accidents, deliveries in
transportation and shortage of car, fuel, power, labor, or materials.
SHIPMENT DATES:
Shipment dates are based on prompt receipt of information to the factory and work load. Unless
expressly agreed by PROFAB COPORATION in writing, time shall not be of the essence in shipping the goods sold. Contact factory for current shipping dates.
Page 2 of 3
DESIGN:
Prices cover current standard design which may be subject to change or modification by the
seller. When parts are ordered for use with an existing installation, the seller will furnish parts as
nearly inter-changeable as feasible. However, the seller reserves the right at any time to discontinue the manufacture of any model or to make changes in design to add improvements to the
products without incurring an obligation to furnish or install the same on products previously
manufactured.
DRAWINGS:
On request, the seller will furnish without charge to the buyer four paper prints of general parts, or
equipment as in the sellers opinion may be necessary. A charge may be applied for additional
prints or more detailed drawings.
EXPORT:
Commercial export packing that requires special specifications shall be submitted at the time an
order is placed with PROFAB CORPORATON. The charge made for such packing will be based on
cost to PROFAB COPORATION and will be shown as a separate item on the invoice.
SECURITY AGREEMENT:
Seller shall retain a security interest in all goods sold until the full purchase price, plus other
proper charges, are paid in full by the purchaser. If so requested by the seller, purchaser shall
execute all security agreements, financing statements, promissory notes, and other security documents requested by seller, in the form determined by the seller.
CATALOGS:
Catalogs and information booklets are the property of the PROFAB CORPORATION in Lubbock,
Texas and must be returned upon request.
Page 3 of 3
CONTENTS
&
DISCOUNT SCHEDULE
PAGE 1 OF 2
CONTENTS
MULTIPLIER
ADDITIONAL SERVICES
CUSTOM MACHINING ( TURNING, MILLING & DRILLING )
Contact Factory
DISCHARGE HEADS
STRESS RELIEVING & HYDRO-TESTING PRICING
Contact Factory
COUPLING GUARDS, STIFFENING RIBS, SEGMENTED ELBOWS,
SWEEPING ELBOWS, & ADDITIONAL HEAD HEIGHT PRICING
Contact Factory
F - HEAD DIMENSIONS ( FITS FOUNDATION OR BASE PLATE )
F - HEAD LIST PRICES
Contact Factory
L - HEAD DIMENSIONS ( FITS BARREL - SUCTION )
L - HEAD LIST PRICE ADDER & DIMENSIONS FOR LARGER
BARREL CONNECTION SIZES
L - HEAD LIST PRICES
T - HEAD DIMENSIONS
Contact Factory
Contact Factory
( FITS BARREL - REGULAR )
T - HEAD LIST PRICE ADDER & DIMENSIONS FOR LARGER
T - HEAD LIST PRICES
U - G HEAD
Contact Factory
Contact Factory
( MOTOR PEDESTAL WITH UNDERGROUND
DISCHARGE COLUMN ) DIMENSIONS
FLANGED COLUMN LIST PRICES FOR U - G HEADS
Contact Factory
U - G HEAD & DISCHARGE COLUMN LIST PRICES
Contact Factory
SUBMERSIBLE DISCHARGE HEAD LIST PRICES & DIMENSIONS
Contact Factory
BARRELS
BARREL W/ FLAT BOTTOM DIMENSIONS
BARREL W/ END CAP DIMENSIONS
SUCTION BARREL W/ FLAT BOTTOM DIMENSIONS
SUCTION BARREL W/ END CAP DIMENSIONS
STRESS RELIEVING & HYDRO-TESTING PRICING
Contact Factory
BARREL LIST PRICES
Contact Factory
CONTENTS
&
DISCOUNT SCHEDULE
PAGE 2 OF 2
CONTENTS
MULTIPLIER
FLANGED COLUMN PIPE
PRODUCT LUBRICATED
OIL LUBRICATED
SUBMERSIBLE
FLANGED COLUMN PIPE ( 12" INCREMENTS ) LIST PRICES
Contact Factory
FLANGED COLUMN PIPE LIST PRICES 5FT. & 10FT.
Contact Factory
LIST PRICE ADDER FOR WELDED INTERNAL SPIDER
Contact Factory
LIST PRICE ADDER FOR HYDRO - TESTING
Contact Factory
ADDITIONAL PRODUCTS
MOTOR STANDS DIMENSIONS & LIST PRICES
Contact Factory
BASE PLATES DIMENSIONS & LIST PRICES
Contact Factory
PACKING BOXES DIMENSIONS & LIST PRICES
Contact Factory
GENERAL INFORMATION
FLANGE DIMENSIONS
N/A
FLANGE PRESSURE RATING
N/A
PIPE WEIGHTS AND PRESSURE RATINGS
N/A
WELDING PROCEDURES
N/A
WELDER CERTIFICATIONS
N/A
QUALITY CONTROL MANUAL
N/A
MANUAL & C.N.C. MACHINE CAPACITIES
N/A
BLANK DRAWINGS
DISCHARGE HEADS
N/A
BARRELS
N/A
FLANGED COLUMN PIPE
N/A
ADDITIONAL PRODUCTS
N/A
LIST PRICE
FOR
STRESS RELIEVING
&
HYDRO-TESTING
DISCHARGE HEADS
VIBRATORY STRESS RELIEVING
LIST
PRICE
L - HEADS
$300.00
F - HEADS
$300.00
T - HEADS
$300.00
MOTOR PEDESTALS
$300.00
HYDRO TESTING --- UP TO 3500 P.S.I.
LIST
PRICE
L - HEADS
2" THRU 14"
$350.00
16" THRU 24"
$500.00
2" THRU 14"
$350.00
16" THRU 24"
$500.00
T - HEADS
2" THRU 12"
$550.00
INNER & OUTER PASSAGES
14" THRU 20"
$700.00
F - HEADS
NOTE: Prices are F.O.B. Lubbock, Texas and are subject to change without notice
LIST PRICE
ADDER SHEET
FOR
COUPLING GUARDS
STIFFENING RIBS
SEGMENTED ELBOWS
SWEEPING ELBOWS
ADDITIONAL HEAD HEIGHT
THE BELOW CHART IS A LIST PRICE ADDER SHEET FOR COUPLING
GUARDS AND DISCHARGE HEAD STIFFENING RIBS
COUPLING
GUARDS
LIST
PRICE
DISCHARGE HEADS
STIFFING RIBS
LIST
PRICE
DISCHARGE HEADS
$250.00
6" THRU 14"
$440.00
MOTOR PEDESTALS
$250.00
16" THRU 20"
$560.00
MOTOR STANDS
$250.00
THE BELOW CHART IS A LIST PRICE ADDER SHEET FOR SEGMENTED
ELBOWS, SWEEPING ELBOWS, AND ADDITIONAL DISCHARGE HEIGHTS
DISCHARGE HEAD
LIST
DISCHARGE HEAD
LIST
DISCHARGE HEAD
LIST PRICE
SEGMENTED ELBOW
PRICE
90 DEGREE ELBOW
PRICE
PIPE BODY SIZE
ADDER
3 PC. SEGMENT
PER FOOT
8"
$662.00
8"
$456.00
8"
$32.00
10"
$716.00
10"
$564.00
10"
$47.00
12"
$746.00
12"
$644.00
12"
$52.00
14"
$874.00
14"
$820.00
14"
$64.00
16"
$1,064.00
16"
$1,170.00
16"
$72.00
18"
$1,200.00
18"
$1,284.00
18"
$84.00
20"
$1,316.00
20"
$1,484.00
20"
$106.00
24"
$124.00
30"
$164.00
" F - TYPE "
DISCHARGE HEAD
DIMENSIONS
DISC. MOTOR
PIPE
A
B
SIZE
B.D.
SIZE
3,4"
12"
10"
1"
12"
3,4"
16 1/2"
12"
1 1/8"
12"
5,6"
12"
10"
1"
14"
5,6"
16 1/2"
12"
1 1/8"
14"
8"
12"
10"
1"
16"
8"
16 1/2"
12"
1 1/8"
16"
14"
1 1/8"
18"
C
D
E
F
G
H
I
DIA.
19"
J
LOAD
WALL
17"
12"
7"
1 3/8"
24"
3/4"
0.365
7,000 #
14"
7"
1 3/8"
24"
7/8"
0.375
7,000 #
12"
9"
1 3/8"
26"
3/4"
0.375
8,900 #
14"
9"
1 3/8"
26"
7/8"
0.375
8,900 #
12"
10"
1 3/8"
28"
3/4"
0.375
10,200 #
23 1/2" 21 1/4"
14"
10"
1 3/8"
28"
7/8"
0.375
10,200 #
23 1/2" 21 1/4"
14"
11"
1 5/8"
32"
7/8"
0.375
11,700 #
23 1/2" 21 1/4"
19"
17"
23 1/2" 21 1/4"
19"
17"
20"
10"
16 1/2"
20"
10"
24 1/2"
18"
1 3/8"
18"
32"
29 1/2"
19"
11"
1 5/8"
32"
1 1/8"
0.375
11,700 #
10"
30 1/2"
24"
1 3/8"
18"
38 3/4"
36"
22"
11"
1 5/8"
32"
1 1/4"
0.375
11,700 #
12"
16 1/2"
16"
1 1/8"
21"
23 1/2" 21 1/4"
14"
13"
1 5/8"
35"
7/8"
0.375
15,000 #
20"
12"
24 1/2"
18"
1 3/8"
21"
32"
29 1/2"
19"
13"
1 5/8"
35"
1 1/8"
0.375
15,000 #
12"
30 1/2"
24"
1 3/8"
21"
38 3/4"
36"
22"
13"
1 5/8"
35"
1 1/4"
0.375
15,000 #
14"
16 1/2"
16"
1 1/4"
23"
25"
22 3/4"
15"
14"
1 5/8"
39"
7/8"
0.375
14,700 #
20"
14"
24 1/2"
20"
1 3/8"
23"
32"
29 1/2"
19"
14"
1 5/8"
39"
1 1/8"
0.375
14,700 #
14"
30 1/2"
24"
1 3/8"
23"
38 3/4"
36"
22"
16"
1 5/8"
39"
1 1/4"
0.375
14,700 #
16"
16 1/2"
16"
1 1/4"
26"
25"
22 3/4"
15"
16"
1 7/8"
42"
7/8"
0.375
15,800 #
20"
16"
24 1/2"
20"
1 3/8"
26"
32"
29 1/2"
19"
16"
1 7/8"
42"
1 1/8"
0.375
15,800 #
16"
30 1/2"
24"
1 3/8"
26"
38 3/4"
36"
22"
16"
1 7/8"
42"
1 1/4"
0.375
15,800 #
18"
20"
18"
1 1/4"
29"
27 1/2"
25"
16"
18"
1 7/8"
45"
1"
0.375
16,900 #
18"
24 1/2"
20"
1 3/8"
29"
32"
29 1/2"
19"
18"
1 7/8"
45"
1 1/8"
0.375
16,900 #
18"
30 1/2"
24"
1 3/8"
29"
38 3/4"
36"
22"
18"
1 7/8"
45"
1 1/4"
0.375
16,900 #
20"
20"
20"
1 1/4"
32"
27 1/2"
25"
16"
20"
2 1/8"
50"
1"
0.375
18,200 #
20"
24 1/2"
24"
1 3/8"
32"
32"
29 1/2"
19"
20"
2 1/8"
50"
1 1/8"
0.375
18,200 #
20"
30 1/2"
24"
1 3/8"
32"
38 3/4"
36"
22"
20"
2 1/8"
50"
1 1/4"
0.375
18,200 #
NOTE: Maximum discharge head height 60"
Standard pressure rating - 275 P.S.I.
"K" THRU "S" DIMENSIONS ARE AS REQUIRED
LIST PRICE
"F - TYPE"
DISCHARGE HEADS
DISCHARGE
SIZE
MOTOR BASE
DIAMETER
LIST
PRICE
300 # DISC.
FLG. ADDER
APPROXIMATE
WEIGHT
2" - 3" - 4"
3" - 4"
6"
6"
8"
8"
8"
10"
10"
10"
12"
12"
12"
14"
14"
14"
16"
16"
16"
18"
18"
18"
20"
20"
20"
12"
16 1/2"
12"
16 1/2"
12"
16 1/2"
20"
16 1/2"
20"
24 1/2"
16 1/2"
20"
24 1/2"
20"
24 1/2"
30 1/2"
20"
24 1/2"
30 1/2"
20"
24 1/2"
30 1/2"
20"
24 1/2"
30 1/2"
$2,020.00
$2,220.00
$2,140.00
$2,416.00
$2,480.00
$2,650.00
$2,726.00
$2,860.00
$2,950.00
$3,520.00
$3,100.00
$3,460.00
$3,620.00
$3,650.00
$3,820.00
$4,560.00
$3,810.00
$4,266.00
$5,220.00
$4,800.00
$5,460.00
$6,020.00
$5,640.00
$6,220.00
$6,820.00
$20.00
$20.00
$30.00
$30.00
$62.00
$62.00
$62.00
$110.00
$110.00
$110.00
$116.00
$116.00
$116.00
$418.00
$418.00
$418.00
$350.00
$350.00
$350.00
$428.00
$428.00
$428.00
$460.00
$460.00
$460.00
250 #
340 #
472 #
510 #
615 #
818 #
708 #
708 #
890 #
1230 #
890 #
954 #
1220 #
1180 #
1490 #
1650 #
1522 #
1796 #
1968 #
1840 #
2110 #
2460 #
2810 #
3200 #
3526 #
NOTE:
Prices are based on standard construction
Pressure rating - 275 P.S.I.
Prices are F.O.B. Lubbock, Texas and are subject to change without notice
" L - TYPE "
DISCHARGE HEAD
DIMENSIONS
DISC.
SIZE
MOTOR
B.D.
A
B
C
E
F
G
H
I
J
3,4
3,4
5,6
5,6
8"
8"
8"
10"
10"
10"
10"
12"
12"
12"
12"
14"
14"
14"
14"
16"
16"
16"
16"
18"
18"
18"
20"
20"
20"
12"
16 1/2"
12"
16 1/2"
12"
16 1/2"
20"
16 1/2"
20"
24 1/2"
30 1/2"
16 1/2"
20"
24 1/2"
30 1/2"
16 1/2"
20"
24 1/2"
30 1/2"
16 1/2"
20"
24 1/2"
30 1/2"
20"
24 1/2"
30 1/2"
20"
24 1/2"
30 1/2"
10"
12"
10"
12"
10"
14"
14"
14"
18"
18"
24"
16"
18"
18"
24"
16"
18"
20"
24"
16"
18"
20"
24"
18"
20"
24"
20"
20"
24"
12"
12"
14"
14"
16"
16"
16"
18"
18"
18"
18"
21"
21"
21"
21"
23"
23"
23"
23"
26"
26"
26"
26"
29"
29"
29"
32"
32"
32"
16"
19"
16"
19"
16"
21"
21"
21"
25"
25"
32"
23.5"
25"
25"
32"
23.5"
25"
27.5"
32"
23.5"
25"
27.5"
32"
25"
27.5"
32"
27.5"
27.5"
32"
10"
12"
10"
12"
10"
13"
13"
13"
15"
15"
18"
14"
15"
15"
18"
14"
15"
16"
18"
14"
15"
16"
18"
15"
16"
18"
16"
16"
18"
7"
7"
9"
9"
10"
10"
10"
11"
11"
11"
11"
13"
13"
13"
13"
14"
14"
14"
14"
16"
16"
16"
16"
18"
18"
18"
20"
20"
20"
1.375"
1.375"
1.375"
1.375"
1.375"
1.375"
1.375"
1.375"
1.375"
1.375"
1.375"
1.375"
1.375"
1.375"
1.625"
1.375"
1.375"
1.375"
1.625"
1.375"
1.375"
1.375"
1.625"
1.375"
1.375"
1.625"
1.375"
1.375"
1.625"
24"
24"
26"
26"
28"
28"
28"
32"
32"
32"
32"
35"
35"
35"
35"
39"
39"
39"
39"
42"
42"
42"
42"
45"
45"
45"
50"
50"
50"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
0.365
0.375
0.365
0.375
0.365
0.375
0.375
0.375
0.365
0.375
0.375
0.365
0.375
0.375
0.365
0.375
0.375
0.365
0.375
0.365
0.375
0.375
0.365
0.375
0.375
0.365
0.375
0.375
0.375
NOTE:
Maximum discharge head height 60"
"K" THRU "S" DIMENSIONS ARE AS REQUIRED
LIST PRICE ADDER
&
DIMENSIONS FOR LARGER
FOR " L - HEADS "
BARREL
PLATE
NUMBER
SIZE
BOLT
APPROX.
LIST
CONNECTION
O.D.
OF
OF
CIRCLE
WEIGHT
PRICE
HOLES
HOLE
SIZE
PIPE
SIZE
ADDER
10"
16"
12
1"
14 1/4"
60 #
$124.00
12"
19"
12
1"
17"
90 #
$188.00
14"
21"
12
1 1/8"
18 3/4"
130 #
$316.00
16"
23 1/2"
16
1 1/8"
21 1/4"
165 #
$432.00
18"
25"
16
1 1/4"
22 3/4"
200 #
$560.00
20"
27 1/2"
20
1 1/4"
25"
262 #
$800.00
24"
32"
20
1 3/8"
29 1/2"
386 #
$992.00
30"
38 3/4"
28
1 3/8"
36"
544 #
$1,456.00
NUMBER
T
U
V
G
E
BOTTOM
PLATE O.D. OF HOLES
10"
16"
12
1"
14"
1"
1.375
10"
12"
19"
12
1"
17"
1"
1.375
12"
14"
21"
12
1"
19"
1"
1.375
13"
16"
23 1/2"
16
1"
21"
2"
1.625
14"
18"
25"
16
1"
23"
2"
1.625
15"
20"
27 1/2"
20
1"
25"
2"
1.875
16"
24"
32"
20
1"
30"
2"
1.875
18"
30"
38 3/4"
28
1"
36"
2"
2.125
22"
LIST PRICE
"L - TYPE"
DISCHARGE HEADS
DISCHARGE
SIZE
MOTOR BASE
DIAMETER
LIST
PRICE
300 # DISC.
FLG. ADDER
APPROXIMATE
WEIGHT
2" - 3" - 4"
3" - 4"
6"
6"
8"
8"
10"
10"
10"
12"
12"
12"
12"
14"
14"
14"
14"
16"
16"
16"
18"
18"
18"
20"
20"
20"
12"
16 1/2"
12"
16 1/2"
12"
16 1/2"
16 1/2"
20"
24 1/2"
16 1/2"
20"
24 1/2"
30 1/2"
16 1/2"
20"
24 1/2"
30 1/2"
20"
24 1/2"
30 1/2"
20"
24 1/2"
30 1/2"
20"
24 1/2"
30 1/2"
$2,210.00
$2,396.00
$2,380.00
$2,570.00
$2,540.00
$2,750.00
$3,164.00
$3,264.00
$3,564.00
$3,586.00
$3,630.00
$3,850.00
$4,760.00
$3,680.00
$3,800.00
$4,072.00
$4,310.00
$4,060.00
$4,610.00
$5,330.00
$5,060.00
$5,640.00
$6,360.00
$5,880.00
$6,420.00
$7,080.00
$20.00
$20.00
$30.00
$30.00
$62.00
$62.00
$110.00
$110.00
$110.00
$116.00
$116.00
$116.00
$116.00
$418.00
$418.00
$418.00
$418.00
$350.00
$350.00
$350.00
$428.00
$428.00
$428.00
$460.00
$460.00
$460.00
250 #
340 #
328 #
472 #
615 #
818 #
708 #
890 #
1230 #
890 #
954 #
1220 #
1520 #
1040 #
1490 #
1650 #
1180 #
1522 #
1796 #
1968 #
1840 #
2110 #
2460 #
2810 #
3200 #
3526 #
NOTE:
F
" T - TYPE "
DISCHARGE HEAD
DIMENSIONS
SUCTION
DISC.
MOTOR
BARREL
A
B
E
F
G
H
I
J
SIZE
SIZE
B.D.
O.D.
4"
3"
12.00
10 3/4"
10"
12
10
7
1.06
24
0.75
0.365
6"
4"
12.00
12 3/4"
12"
14
11
9
1.12
28
0.88
0.375
6"
4"
16.50
14"
14"
14
12
9
1.25
28
0.88
0.375
8"
6"
12.00
12 3/4"
12"
17
11
10
1.12
29
0.88
0.375
8"
6"
16.50
14"
14"
17
12
10
1.25
29
0.88
0.375
8"
6"
20.00
16"
16"
17
13
10
1.31
29
0.88
0.375
8"
6"
24.50
18"
18"
17
14
10
1.44
29
1.00
0.375
10"
8"
16.50
14"
14"
19
12
11
1.25
31
0.88
0.375
10"
8"
20.00
18"
18"
19
14
11
1.44
31
1.00
0.375
10"
8"
24.50
18"
20"
19
16
11
1.56
31
1.12
0.375
12"
10"
20.00
18"
18"
22
14
13
1.44
34
1.00
0.375
12"
10"
24.50
24"
24"
22
18
13
1.75
34
1.12
0.375
12"
10"
30.50
24"
24"
22
18
13
1.75
34
1.25
0.375
14"
12"
24.50
24"
24"
24
18
14
1.75
36
1.12
0.375
14"
12"
30.50
24"
24"
24
18
14
1.75
36
1.25
0.375
16"
14"
24.50
24"
24"
27
18
16
1.75
43
1.12
0.375
16"
14"
30.50
24"
24"
27
18
16
1.75
43
1.25
0.375
18"
16"
24.50
24"
24"
29
18
17
1.75
45
1.12
0.375
18"
16"
30.50
24"
24"
29
18
17
1.75
45
1.25
0.375
20"
18"
30.50
30"
30"
32
22
19
2.75
48
1.25
0.375
NOTE:
Maximum discharge head height 60"
"K" THRU "T" DIMENSIONS ARE AS REQUIRED
LIST PRICE ADDER
&
DIMENSIONS FOR LARGER
FOR T - HEADS
BARREL
CONNECTION
SIZE
PLATE
O.D.
NUMBER
OF
HOLES
SIZE
OF
HOLE
BOLT
CIRCLE
APPROX.
WEIGHT
LIST
PRICE
ADDER
10"
12"
14"
16"
18"
20"
24"
30"
16"
19"
21"
23 1/2"
25"
27 1/2"
32"
38 3/4"
12
12
12
16
16
20
20
28
1"
1"
1 1/8"
1 1/8"
1 1/4"
1 1/4"
1 3/8"
1 3/8"
14 1/4"
17"
18 3/4"
21 1/4"
22 3/4"
25"
29 1/2"
36"
60 #
90 #
130 #
165 #
200 #
262 #
386 #
544 #
$124.00
$188.00
$316.00
$432.00
$560.00
$800.00
$992.00
$1,456.00
T
U
V
G
E
1"
1"
1"
1"
1"
1"
1"
1"
14"
17"
19"
21"
23"
25"
30"
36"
1"
1"
1"
2"
2"
2"
2"
2"
1.375
1.375
1.375
1.625
1.625
1.875
1.875
2.125
10"
12"
13"
14"
15"
16"
18"
22"
PIPE
SIZE
10"
12"
14"
16"
18"
20"
24"
30"
BOTTOM
NUMBER
PLATE O.D. OF HOLES
16"
19"
21"
23 1/2"
25"
27 1/2"
32"
38 3/4"
12
12
12
16
16
20
20
28
LIST PRICE
"T - TYPE"
DISCHARGE HEADS
SUC.
SIZE
DISC.
SIZE
MOTOR BASE
DIAMETER
LIST
PRICE
300 # DISC.
FLG. ADDER
APPROX.
WEIGHT
4"
3"
12"
$2,424.00
$20.00
250 #
6"
4"
12"
$2,896.00
$20.00
340 #
6"
4"
16 1/2"
$3,198.00
$20.00
328 #
8"
6"
12"
$3,092.00
$30.00
472 #
8"
6"
16 1/2"
$3,498.00
$30.00
510 #
8"
6"
20"
$3,780.00
$30.00
818 #
8"
6"
24 1/2"
$3,860.00
$30.00
818 #
10"
8"
16 1/2"
$3,592.00
$62.00
708 #
10"
8"
20"
$4,066.00
$62.00
890 #
10"
8"
24 1/2"
$5,222.00
$62.00
1230 #
12"
10"
20"
$4,368.00
$110.00
890 #
12"
10"
24 1/2"
$5,290.00
$110.00
1328 #
12"
10"
30 1/2"
$5,404.00
$110.00
954 #
14"
12"
20"
$5,574.00
$116.00
1180 #
14"
12"
24 1/2"
$5,872.00
$116.00
1490 #
14"
12"
30 1/2"
$6,424.00
$116.00
1650 #
16"
14"
24 1/2"
$5,610.00
$418.00
1796 #
16"
14"
30 1/2"
$6,846.00
$418.00
1822 #
18"
16"
24 1/2"
$6,480.00
$350.00
1656 #
18"
20"
16"
18"
30 1/2"
30 1/2"
$7,348.00
$8,104.00
$350.00
$428.00
1878 #
1918 #
NOTE:
MOTOR PEDESTAL
&
UNDERGROUND DISCHARGE
DIMENSIONS
MOTOR PEDESTAL DIMENSIONS
B.D.
A.K.
C
D
E
N
O
P
Q
R
S
T
12"
8.25
18"
1 1/4"
18"
7/8"
15"
AS REQUIRED
16 1/2"
13.50
18"
1 1/4"
22"
7/8"
19"
AS REQUIRED
20"
13.50
18"
1 1/2"
25"
1"
22"
AS REQUIRED
24 1/2"
13.50
24"
1 1/2"
30"
1"
27"
AS REQUIRED
30 1/2"
22.00
24"
1 1/2"
36"
1 1/8"
33"
AS REQUIRED
U
W
UNDERGROUND DISCHARGE DIMENSIONS
O.D.
F
G
H
J
K
L
M
T
V
W
X
Y
Z
4 1/2"
4.309
7 1/2"
8"
4.312
7 1/2"
A/R
8"
8
5/8"
6.50
8
3/4"
6.50
6 5/8"
6.432
10"
9"
6.435
10"
A/R
8"
8
3/4"
8.63
8
7/8"
8.63
8 5/8"
8.432
12"
10"
8.435
12"
A/R
9"
8
3/4"
10.63
8
7/8"
10.63
10 3/4"
10.559 14 5/8"
11"
10.561 14 5/8"
A/R
10"
12
7/8"
13.00
12
1"
13.00
12 3/4"
12.534 16 5/8"
13"
12.537 16 5/8"
A/R
11"
12
7/8"
15.00
12
1"
15.00
14"
13.784 18 1/2"
14"
13.787 18 1/2"
A/R
12"
12
7/8"
16.75
12
1"
16.75
16"
15.784 21 1/2"
15"
15.787 21 1/2"
A/R
13"
12
1"
18.75
12
1 1/8"
18.75
18"
18.496
23"
16"
18.500
23"
A/R
14"
12
1 1/8"
21.00
12
1 1/4"
21.00
20"
20.496
25"
17"
20.500
25"
A/R
15"
12
1 1/4"
23.00
12
1 1/4"
23.00
NOTE:
A/R = AS REQUIRED
"P" THRU "W" DIMENSIONS ARE AS REQUIRED
LIST PRICE
"PRODUCT LUBE / OIL LUBE"
FLANGED COLUMN PIPE
( 12" INCREMENTS )
3" COLUMN
0"
13"
25"
37"
49"
61"
73"
85"
97"
109"
TO
TO
TO
TO
TO
TO
TO
TO
TO
TO
0"
13"
25"
37"
49"
61"
73"
85"
97"
109"
TO
TO
TO
TO
TO
TO
TO
TO
TO
TO
0"
13"
25"
37"
49"
61"
73"
85"
97"
109"
TO
TO
TO
TO
TO
TO
TO
TO
TO
TO
240"
0"
13"
25"
37"
49"
61"
73"
85"
97"
109"
TO
TO
TO
TO
TO
TO
TO
TO
TO
TO
240"
12"
24"
36"
48"
60"
72"
84"
96"
108"
120"
4" COLUMN
$240.00
$248.00
$258.00
$266.00
$276.00
$280.00
$290.00
$298.00
$308.00
$316.00
0"
13"
25"
37"
49"
61"
73"
85"
97"
109"
TO
TO
TO
TO
TO
TO
TO
TO
TO
TO
$382.00
$404.00
$422.00
$444.00
$462.00
$484.00
$504.00
$526.00
$544.00
$566.00
0"
13"
25"
37"
49"
61"
73"
85"
97"
109"
TO
TO
TO
TO
TO
TO
TO
TO
TO
TO
240"
$622.00
$684.00
$742.00
$802.00
$864.00
$922.00
$982.00
$1,042.00
$1,100.00
$1,160.00
$1,754.00
0"
13"
25"
37"
49"
61"
73"
85"
97"
109"
TO
TO
TO
TO
TO
TO
TO
TO
TO
TO
240"
6" COLUMN
12"
24"
36"
48"
60"
72"
84"
96"
108"
120"
5" COLUMN
$276.00
$290.00
$304.00
$314.00
$326.00
$336.00
$350.00
$360.00
$372.00
$386.00
0"
13"
25"
37"
49"
61"
73"
85"
97"
109"
TO
TO
TO
TO
TO
TO
TO
TO
TO
TO
$454.00
$492.00
$532.00
$568.00
$608.00
$644.00
$680.00
$720.00
$758.00
$794.00
$1,170.00
0"
13"
25"
37"
49"
61"
73"
85"
97"
109"
TO
TO
TO
TO
TO
TO
TO
TO
TO
TO
240"
$758.00
$824.00
$890.00
$956.00
$1,022.00
$1,090.00
$1,152.00
$1,230.00
$1,284.00
$1,352.00
$2,010.00
0"
13"
25"
37"
49"
61"
73"
85"
97"
109"
TO
TO
TO
TO
TO
TO
TO
TO
TO
TO
240"
0"
13"
25"
37"
49"
61"
73"
85"
97"
109"
TO
TO
TO
TO
TO
TO
TO
TO
TO
TO
240"
8" COLUMN
12" COLUMN
12"
24"
36"
48"
60"
72"
84"
96"
108"
120"
12"
24"
36"
48"
60"
72"
84"
96"
108"
120"
12"
24"
36"
48"
60"
72"
84"
96"
108"
120"
12"
24"
36"
48"
60"
72"
84"
96"
108"
120"
$588.00
$634.00
$680.00
$726.00
$774.00
$820.00
$866.00
$910.00
$960.00
$1,004.00
$1,468.00
16" COLUMN
18" COLUMN
12"
24"
36"
48"
60"
72"
84"
96"
108"
120"
$360.00
$376.00
$392.00
$410.00
$428.00
$444.00
$462.00
$476.00
$494.00
$512.00
10" COLUMN
14" COLUMN
12"
24"
36"
48"
60"
72"
84"
96"
108"
120"
12"
24"
36"
48"
60"
72"
84"
96"
108"
120"
12"
24"
36"
48"
60"
72"
84"
96"
108"
120"
$906.00
$976.00
$1,048.00
$1,120.00
$1,192.00
$1,262.00
$1,334.00
$1,408.00
$1,476.00
$1,550.00
$2,264.00
20" COLUMN
$1,108.00
$1,190.00
$1,270.00
$1,352.00
$1,436.00
$1,514.00
$1,600.00
$1,680.00
$1,762.00
$1,848.00
$2,668.00
12"
24"
36"
48"
60"
72"
84"
96"
108"
120"
$1,370.00
$1,468.00
$1,566.00
$1,666.00
$1,768.00
$1,864.00
$1,966.00
$2,066.00
$2,176.00
$2,262.00
$3,256.00
LIST PRICE
FOR
MOTOR PEDESTAL
&
UNDERGROUND
DISCHARGE COLUMN
LIST PRICE ADDER FOR AIR RELIEF SPACER
FLANGED COLUMN PIPE
PIPE
SIZE
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
DISCHARGE FLANGE
LIST
PRICE
LIST
PRICE
APPROX.
WEIGHT
5 FT.
10 FT
5 FT.
10 FT
$326.00
$428.00
$462.00
$608.00
$774.00
$864.00
$1,022.00
$1,192.00
$1,436.00
$1,768.00
$386.00
$512.00
$566.00
$794.00
$1,004.00
$1,160.00
$1,352.00
$1,552.00
$1,848.00
$2,262.00
82 #
133 #
153 #
229 #
332 #
444 #
510 #
632 #
790 #
892 #
136 #
208 #
248 #
374 #
535 #
694 #
784 #
946 #
1150 #
1292 #
FLANGE
SIZE
LIST
PRICE
APPROX.
WEIGHT
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
$160.00
$230.00
$268.00
$310.00
$370.00
$504.00
$560.00
$710.00
$790.00
$914.00
24 #
29 #
37 #
56 #
78 #
109 #
134 #
184 #
222 #
270 #
LIST ADDER FOR AIR RELIEF SPACER BETWEEN CENTER PLATE AND
STUFFING BOX FOR 3/4" OR 1" AIR RELIEF $500.00 LIST COST
MOTOR PEDESTAL ONLY
MOTOR BASE
DIAMETER
LIST
PRICE
APPROX.
WEIGHT
12"
16 1/2"
20"
24 1/2"
30 1/2"
$1,228.00
$1,510.00
$1,770.00
$2,450.00
$2,920.00
230 #
350 #
425 #
600 #
948 #
LIST PRICE
&
DIMENSIONS
FOR
"SUBMERSIBLE DISCHARGE"
"HEADS"
DISC. CASING
SIZE
SIZE
O.D.
A
B
C
D
E
F
LIST
PRICE
APPROX.
WEIGHT
4"
4"
4"
4"
8"
10"
12"
14"
13 1/2"
16"
19"
21"
6"
6"
6"
6"
1"
1"
1 1/8"
1 1/8"
7/8"
1"
1"
1 1/8"
11.75
14.25
17.00
18.75
8"
8"
8"
8"
6 1/2"
6 1/2"
6 1/2"
6 1/2"
$516.00
$556.00
$610.00
$668.00
77 #
100 #
122 #
144 #
6"
6"
6"
6"
6"
10"
12"
14"
16"
18"
16"
19"
21"
23 1/2"
25"
6"
6"
6"
6"
6"
1"
1 1/8"
1 1/4"
1 1/4"
1 1/4"
1"
1"
1 1/8"
1 1/8"
1 1/4"
14.25
17.00
18.75
21.25
22.75
9"
9"
9"
9"
9"
9 1/2"
9 1/2"
9 1/2"
9 1/2"
9 1/2"
$726.00
$782.00
$866.00
$940.00
$980.00
108 #
154 #
191 #
202 #
242 #
8"
8"
8"
8"
12"
14"
16"
18"
19"
21"
23 1/2"
25"
6"
6"
6"
6"
1 1/8"
1 1/4"
1 1/4"
1 1/4"
1"
1 1/8"
1 1/8"
1 1/4"
17.00
18.75
21.25
22.75
12"
12"
12"
12"
12 1/2" $920.00
12 1/2" $984.00
12 1/2" $1,072.00
12 1/2" $1,116.00
190 #
228 #
238 #
278 #
10"
10"
10"
10"
16"
18"
20"
24"
23 1/2"
25"
27 1/2"
32"
6"
6"
6"
6"
1 1/4"
1 1/4"
1 3/8"
1 1/2"
1 1/8"
1 1/4"
1 1/4"
1 3/8"
21.25
22.75
25.00
29.50
15"
15"
15"
15"
15 1/2"
15 1/2"
15 1/2"
15 1/2"
$1,250.00
$1,288.00
$1,376.00
$1,592.00
280 #
320 #
380 #
490 #
12"
12"
12"
12"
16"
18"
20"
24"
23 1/2"
25"
27 1/2"
32"
6"
6"
6"
6"
1 1/4"
1 1/4"
1 3/8"
1 1/2"
1 1/8"
1 1/4"
1 1/4"
1 3/8"
21.25
22.75
25.00
29.50
18"
18"
18"
18"
18 1/2"
18 1/2"
18 1/2"
18 1/2"
$1,440.00
$1,480.00
$1,564.00
$1,782.00
342 #
382 #
442 #
552 #
BARREL
DIMENSIONS
"WITH PLATE BOTTOM"
BARREL
A
B
C
D
E
F
G
H
I
8"
0.332
1 1/8"
A/R
18"
15"
8
3/4"
11.75"
3/4"
10"
0.365
1 1/8"
A/R
18"
15"
12
7/8"
14.25"
3/4"
12"
0.375
1 3/8"
A/R
20"
17"
12
7/8"
17.00"
7/8"
14"
0.375
1 3/8"
A/R
22"
19"
12
1"
18.75"
7/8"
16"
0.375
1 3/8"
A/R
24"
21"
16
1"
21.25"
7/8"
18"
0.375
1 3/8"
A/R
26"
23"
16
1 1/8"
22.75"
7/8"
20"
0.375
1 3/8"
A/R
28"
25"
20
1 1/8"
25.00"
7/8"
24"
0.375
1 5/8"
A/R
32"
28"
20
1 1/4"
29.50"
1"
30"
0.375
1 7/8"
A/R
40"
36"
28
1 1/4"
36.00"
1 1/8"
SIZE
NOTE:
Maximum one piece barrel -- 20" barrel x 20 ft. long
Contact factory for longer lengths
Standard pressure rating -- 275 P.S.I.
A/R = as required
BARREL
DIMENSIONS
"WITH END CAP"
BARREL
A
B
C
D
E
F
G
H
I
8"
0.332
1 1/8"
A/R
18"
15"
8
3/4"
11.75"
3/4"
10"
0.365
1 1/8"
A/R
18"
15"
12
7/8"
14.25"
3/4"
12"
0.375
1 3/8"
A/R
20"
17"
12
7/8"
17.00"
7/8"
14"
0.375
1 3/8"
A/R
22"
19"
12
1"
18.75"
7/8"
16"
0.375
1 3/8"
A/R
24"
21"
16
1"
21.25"
7/8"
18"
0.375
1 3/8"
A/R
26"
23"
16
1 1/8"
22.75"
7/8"
20"
0.375
1 3/8"
A/R
28"
25"
20
1 1/8"
25.00"
7/8"
24"
0.375
1 3/8"
A/R
32"
28"
20
1 1/4"
29.50"
1"
30"
0.375
1 5/8"
A/R
40"
36"
28
1 1/4"
36.00"
1 1/8"
SIZE
NOTE:
A/R = as required
SUCTION BARREL
DIMENSIONS
"WITH END CAP"
BARREL
A
B
C
D
E
F
G
H
I
J
SIZE
K
L
MIN.
MIN.
8"
0.332
1 1/8"
A/R
18"
15"
8
3/4"
11.75"
3/4"
1 1/4"
10"
9"
10"
0.365
1 1/8"
A/R
18"
15"
12
7/8"
14.25"
3/4"
1 1/4"
10"
9"
12"
0.375
1 3/8"
A/R
20"
17"
12
7/8"
17.00"
7/8"
1 1/2"
12"
10"
14"
0.375
1 3/8"
A/R
22"
19"
12
1"
18.75"
7/8"
1 1/2"
13"
11"
16"
0.375
1 3/8"
A/R
24"
21"
16
1"
21.25"
7/8"
1 1/2"
14"
12"
18"
0.375
1 3/8"
A/R
26"
23"
16
1 1/8"
22.75"
7/8"
1 1/2"
15"
14"
20"
0.375
1 3/8"
A/R
28"
25"
20
1 1/8"
25.00"
7/8"
1 1/2"
16"
15"
24"
0.375
1 5/8"
A/R
32"
28"
20
1 1/4"
29.50"
1"
1 3/4"
18"
16"
30"
0.375
1 7/8"
A/R
40"
36"
28
1 1/4"
36.00"
1 1/8"
2"
22"
20"
NOTE:
A/R = as required
SUCTION BARREL
DIMENSIONS
"WITH PLATE BOTTOM"
BARREL
A
B
C
SIZE
D
E
SQ.
SQ.
F
G
H
I
J
K
L
MIN.
MIN.
8"
0.332
1 1/8"
A/R
18"
15"
8
3/4"
11.75"
3/4"
1 1/4"
10"
9"
10"
0.365
1 1/8"
A/R
18"
15"
12
7/8"
14.25"
3/4"
1 1/4"
10"
9"
12"
0.375
1 3/8"
A/R
20"
17"
12
7/8"
17.00"
7/8"
1 1/2"
12"
10"
14"
0.375
1 3/8"
A/R
22"
19"
12
1"
18.75"
7/8"
1 1/2"
13"
11"
16"
0.375
1 3/8"
A/R
24"
21"
16
1"
21.25"
7/8"
1 1/2"
14"
12"
18"
0.375
1 3/8"
A/R
26"
23"
16
1 1/8"
22.75"
7/8"
1 1/2"
15"
14"
20"
0.375
1 3/8"
A/R
28"
25"
20
1 1/8"
25.00"
7/8"
1 1/2"
16"
15"
24"
0.375
1 5/8"
A/R
32"
28"
20
1 1/4"
29.50"
1"
1 3/4"
18"
16"
30"
0.375
1 7/8"
A/R
40"
36"
28
1 1/4"
36.00"
1 1/8"
2"
22"
20"
NOTE:
A/R = as required
LIST PRICE
FOR
STRESS RELIEVING
&
HYDRO-TESTING
BARRELS
VIBRATORY STRESS RELIEVING
LIST
PRICE
BARRELS
$300.00
HYDRO TESTING --- UP TO 3500 P.S.I.
LIST
PRICE
BARRELS
8" THRU 14"
10' AND UNDER
$300.00
8" THRU 14"
10' TO 20'
$400.00
16" THRU 24"
10' AND UNDER
$500.00
16" THRU 24"
10' TO 20'
$650.00
30" THRU 36"
10' AND UNDER
$800.00
30" THRU 36"
10' TO 20'
$1,100.00
LIST PRICE
BARRELS
"SUCTIONS & END CAPS"
BARREL
SIZE
FIRST
5 FT.
EACH
ADD.
FOOT
8"
10"
12"
14"
16"
18"
20"
24"
30"
$780.00
$856.00
$1,078.00
$1,172.00
$1,342.00
$1,560.00
$1,870.00
$2,290.00
$3,840.00
$40.00
$50.00
$60.00
$68.00
$74.00
$82.00
$100.00
$118.00
$140.00
SUCTION ADDER
"IF REQUIRED"
FLANGE
LIST
APPROX.
SIZE
PRICE
WEIGHT
8"
10"
12"
14"
16"
18"
20"
24"
30"
NOTE:
$310.00
$370.00
$504.00
$560.00
$710.00
$790.00
$914.00
$1,086.00
$1,536.00
60 #
85#
120 #
146 #
175 #
200 #
268 #
362 #
578 #
APPROXIMATE WEIGHT
FIRST
EACH
5 FT.
ADD. FT.
262 #
322 #
422 #
483 #
563 #
652 #
738 #
987 #
1528 #
29 #
41 #
50 #
55 #
63 #
72 #
80 #
95 #
119 #
END CAP ADDER
"IF REQUIRED"
END
LIST
APPROX.
CAP SIZE
PRICE
WEIGHT
8"
10"
12"
14"
16"
18"
20"
24"
30"
Flange prices are based on A.N.S.I. 150# raised face slip-on flanges
$40.00
$68.00
$84.00
$156.00
$182.00
$208.00
$240.00
$338.00
$674.00
12 #
20 #
29 #
35 #
44 #
58 #
79 #
105 #
125 #
FLANGED COLUMN PIPE
"PRODUCT LUBRICATED"
DIMENSIONS
COLUMN
O.D.
B.C.
A
B
C
D
E
NUMBER
SIZE
SIZE & LENGTH
PIPE
OF
OF
OF BOLTS
SIZE
HOLES
HOLES
REQUIRED
3"
6 1/2"
5.50"
4
3/4"
3.312
0.245
0.216
A/R
3/4"
5/8" x 2 1/2"
4"
7 1/2"
6.25"
8
3/4"
4.312
0.245
0.237
A/R
3/4"
5/8" x 2 1/2"
5"
10"
8.62"
8
7/8"
5.375
0.370
0.258
A/R
1"
3/4" x 3"
6"
10"
8.62"
8
7/8"
6.437
0.370
0.280
A/R
1"
3/4" x 3"
8"
12"
10.62"
8
7/8"
8.435
0.370
0.332
A/R
1"
3/4" x 3"
10"
14 5/8" 13.00"
12
1"
10.561
0.370
0.365
A/R
1 1/8"
7/8" x 3 1/2"
12"
16 5/8" 15.00"
12
1"
12.537
0.370
0.375
A/R
1 1/4"
7/8" x 3 1/2"
14"
18 1/2" 16.75"
12
1"
13.787
0.370
0.375
A/R
1 3/8"
7/8" x 4"
16"
21 1/2" 18.75"
12
1 1/8"
15.787
0.370
0.375
A/R
1 3/8"
1" x 3 1/2"
18"
23"
21.00"
12
1 1/4"
18.500
0.370
0.375
A/R
1 3/8"
1 1/8" x 4 1/2"
20"
25"
23.00"
16
1 1/4"
20.500
0.370
0.375
A/R
1 5/8"
1 1/8" x 4 1/2"
NOTE: A/R = As Required
ProFab Standards -- Dimensions can vary to meet customer specifications
FLANGED COLUMN PIPE
"OIL LUBRICATED"
DIMENSIONS
COLUMN
O.D.
B.C.
A
B
C
D
E
F
G
SIZE & LENGTH
NUMBER
SIZE
PIPE
OF
OF
OF BOLTS
SIZE
HOLES
HOLES
REQUIRED
3"
6 1/2"
5.50"
4
3/4"
3.748
0.125
0.216
A/R
3/4"
0.187
3.752
5/8" x 2 1/2"
4"
7 1/2"
6.25"
8
3/4"
4.748
0.125
0.237
A/R
3/4"
0.187
4.752
5/8" x 2 1/2"
5"
10"
8.62"
8
7/8"
6.935
0.125
0.258
A/R
1"
0.187
6.939
3/4" x 3"
6"
10"
8.62"
8
7/8"
6.935
0.125
0.280
A/R
1"
0.187
6.939
3/4" x 3"
8"
12"
10.62"
8
7/8"
8.935
0.125
0.332
A/R
1"
0.187
8.939
3/4" x 3"
10"
14 5/8" 13.00"
12
1"
11.123
0.125
0.365
A/R 1 1/8" 0.187
11.127
7/8" x 3 1/2"
12"
16 5/8" 15.00"
12
1"
13.123
0.125
0.375
A/R 1 1/4" 0.187
13.127
7/8" x 3 1/2"
14"
18 1/2" 16.75"
12
1"
14.373
0.125
0.375
A/R 1 3/8" 0.187
14.377
7/8" x 4"
16"
21 1/2" 18.75"
12
1 1/8"
16.373
0.125
0.375
A/R 1 3/8" 0.187
16.377
1" x 3 1/2"
18"
23"
21.00"
12
1 1/4"
18.373
0.125
0.375
A/R 1 3/8" 0.187
18.377
1 1/8" x 4 1/2"
20"
25"
23.00"
16
1 1/4"
20.373
0.125
0.375
A/R 1 5/8" 0.187
20.377
1 1/8" x 4 1/2"
FLANGED COLUMN PIPE
" SUBMERSIBLE "
DIMENSIONS
COLUMN
O.D.
B.C.
C
D
E
NUMBER
SIZE
SIZE & LENGTH
PIPE
OF
OF
OF BOLTS
SIZE
HOLES
HOLES
REQUIRED
3"
6 1/2"
5.50"
4
3/4"
0.216
A/R
3/4"
5/8" x 2 1/2"
4"
7 1/2"
6.25"
8
3/4"
0.237
A/R
3/4"
5/8" x 2 1/2"
5"
10"
8.62"
8
7/8"
0.258
A/R
1"
3/4" x 3"
6"
10"
8.62"
8
7/8"
0.280
A/R
1"
3/4" x 3"
8"
12"
10.62"
8
7/8"
0.332
A/R
1"
3/4" x 3"
10"
14 5/8"
13.00"
12
1"
0.365
A/R
1 1/8"
7/8" x 3 1/2"
12"
16 5/8"
15.00"
12
1"
0.375
A/R
1 1/4"
7/8" x 3 1/2"
LIST PRICE
"PRODUCT LUBE / OIL LUBE"
FLANGED COLUMN PIPE
( 12" INCREMENTS )
3" COLUMN
0"
13"
25"
37"
49"
61"
73"
85"
97"
109"
TO
TO
TO
TO
TO
TO
TO
TO
TO
TO
0"
13"
25"
37"
49"
61"
73"
85"
97"
109"
TO
TO
TO
TO
TO
TO
TO
TO
TO
TO
0"
13"
25"
37"
49"
61"
73"
85"
97"
109"
TO
TO
TO
TO
TO
TO
TO
TO
TO
TO
240"
0"
13"
25"
37"
49"
61"
73"
85"
97"
109"
TO
TO
TO
TO
TO
TO
TO
TO
TO
TO
240"
12"
24"
36"
48"
60"
72"
84"
96"
108"
120"
4" COLUMN
$240.00
$248.00
$258.00
$266.00
$276.00
$280.00
$290.00
$298.00
$308.00
$316.00
0"
13"
25"
37"
49"
61"
73"
85"
97"
109"
TO
TO
TO
TO
TO
TO
TO
TO
TO
TO
$382.00
$404.00
$422.00
$444.00
$462.00
$484.00
$504.00
$526.00
$544.00
$566.00
0"
13"
25"
37"
49"
61"
73"
85"
97"
109"
TO
TO
TO
TO
TO
TO
TO
TO
TO
TO
240"
$622.00
$684.00
$742.00
$802.00
$864.00
$922.00
$982.00
$1,042.00
$1,100.00
$1,160.00
$1,754.00
0"
13"
25"
37"
49"
61"
73"
85"
97"
109"
TO
TO
TO
TO
TO
TO
TO
TO
TO
TO
240"
6" COLUMN
12"
24"
36"
48"
60"
72"
84"
96"
108"
120"
5" COLUMN
$276.00
$290.00
$304.00
$314.00
$326.00
$336.00
$350.00
$360.00
$372.00
$386.00
0"
13"
25"
37"
49"
61"
73"
85"
97"
109"
TO
TO
TO
TO
TO
TO
TO
TO
TO
TO
$454.00
$492.00
$532.00
$568.00
$608.00
$644.00
$680.00
$720.00
$758.00
$794.00
$1,170.00
0"
13"
25"
37"
49"
61"
73"
85"
97"
109"
TO
TO
TO
TO
TO
TO
TO
TO
TO
TO
240"
$758.00
$824.00
$890.00
$956.00
$1,022.00
$1,090.00
$1,152.00
$1,230.00
$1,284.00
$1,352.00
$2,010.00
0"
13"
25"
37"
49"
61"
73"
85"
97"
109"
TO
TO
TO
TO
TO
TO
TO
TO
TO
TO
240"
0"
13"
25"
37"
49"
61"
73"
85"
97"
109"
TO
TO
TO
TO
TO
TO
TO
TO
TO
TO
240"
8" COLUMN
12" COLUMN
12"
24"
36"
48"
60"
72"
84"
96"
108"
120"
12"
24"
36"
48"
60"
72"
84"
96"
108"
120"
12"
24"
36"
48"
60"
72"
84"
96"
108"
120"
12"
24"
36"
48"
60"
72"
84"
96"
108"
120"
$588.00
$634.00
$680.00
$726.00
$774.00
$820.00
$866.00
$910.00
$960.00
$1,004.00
$1,468.00
16" COLUMN
18" COLUMN
12"
24"
36"
48"
60"
72"
84"
96"
108"
120"
$360.00
$376.00
$392.00
$410.00
$428.00
$444.00
$462.00
$476.00
$494.00
$512.00
10" COLUMN
14" COLUMN
12"
24"
36"
48"
60"
72"
84"
96"
108"
120"
12"
24"
36"
48"
60"
72"
84"
96"
108"
120"
12"
24"
36"
48"
60"
72"
84"
96"
108"
120"
$906.00
$976.00
$1,048.00
$1,120.00
$1,192.00
$1,262.00
$1,334.00
$1,408.00
$1,476.00
$1,550.00
$2,264.00
20" COLUMN
$1,108.00
$1,190.00
$1,270.00
$1,352.00
$1,436.00
$1,514.00
$1,600.00
$1,680.00
$1,762.00
$1,848.00
$2,668.00
12"
24"
36"
48"
60"
72"
84"
96"
108"
120"
$1,370.00
$1,468.00
$1,566.00
$1,666.00
$1,768.00
$1,864.00
$1,966.00
$2,066.00
$2,176.00
$2,262.00
$3,256.00
FLANGED COLUMN PIPE
"OIL & PRODUCT LUBE"
"SUBMERSIBLE"
STANDARD - 5FT, 10FT, & 20FT. LENGTHS
LIST PRICE ADDER FOR WELDED INTERNAL SPIDER
LIST PRICE ADDER FOR HYDRO - TESTING COLUMNS
FLANGED COLUMN PIPE
FLANGED COLUMN
APPROXIMATE WEIGHT
PIPE
WALL
LENGTH
FIRST
EACH ADD.
SIZE
THICKNESS
5 FT.
10 FT.
5 FT.
10 FT
FOOT
FOOT
3"
0.216
$276.00
$316.00
58 #
98 #
26 #
8#
4"
0.237
$326.00
$386.00
82 #
136 #
37 #
11 #
5"
0.258
$428.00
$512.00
133 #
208 #
73 #
15 #
6"
0.280
$462.00
$566.00
153 #
248 #
77 #
19 #
8"
0.322
$608.00
$794.00
229 #
374 #
113 #
29 #
10"
0.365
$774.00
$1,004.00
332 #
535 #
167 #
41 #
12"
0.375
$864.00
$1,160.00
444 #
694 #
244 #
50 #
14"
0.375
$1,022.00
$1,352.00
510 #
784 #
289 #
55 #
16"
0.375
$1,192.00
$1,552.00
632 #
946 #
379 #
63 #
18"
0.375
$1,436.00
$1,848.00
790 #
1150 #
502 #
72 #
20"
0.375
$1,768.00
$2,262.00
892 #
1292 #
572 #
80 #
SUBMERSIBLE FLANGED COLUMN
PIPE
WALL
SIZE
THICKNESS
4"
5"
6"
8"
10"
12"
0.237
0.258
0.280
0.322
0.365
0.375
10 FT.
$342.00
$446.00
$502.00
$732.00
$956.00
$1,116.00
20 FT.
$460.00
$618.00
$704.00
$1,108.00
$1,420.00
$1,710.00
APPROXIMATE WEIGHT
10 FT.
20 FT.
136 #
208 #
248 #
374 #
535 #
694 #
246 #
358 #
438 #
664 #
945 #
1194 #
PIPE SIZE AND LIST PRICE ADDER FOR WELDED INTERNAL SPIDER
4"
6"
8"
10"
12"
14"
16"
18"
$250.00
$300.00
$350.00
$400.00
$450.00
$500.00
$600.00
$700.00
PIPE SIZE AND LIST PRICE ADDER HYDRO - TESTING COLUMNS
4"
6"
8"
10"
12"
14"
16"
18"
$200.00
$200.00
$200.00
$250.00
$250.00
$300.00
$300.00
$350.00
NOTE:
( 1 ) Heavier wall thickness and seamless pipe available
( 2 ) Stainless steels and other alloys available
( 3 ) Contact factory for pricing
Prices are F.O.B. Lubbock, Texas and subject to change without notice
LIST PRICE
&
DIMENSIONS
FOR
MOTOR STANDS
DRIVER
B.D.
HEAD
B.D.
STANDARD
HEIGHT
O.D.
A
B
C
D
E
12"
12"
18"
A/R
A/R
8.25
8.25
7/8"
7/8"
12"
16 1/2"
18"
A/R
A/R
8.25
13.5
7/8"
1"
16 1/2"
16 1/2"
18"
A/R
A/R
13.5
13.5
1"
1"
16 1/2"
20"
18"
A/R
A/R
13.5
13.5
1"
1"
20"
20"
18"
A/R
A/R
13.5
13.5
1"
1"
20"
24 1/2"
20"
A/R
A/R
13.5
13.5
1"
1 1/8"
24 1/2"
24 1/2"
20"
A/R
A/R
13.5
13.5
1 1/8"
1 1/8"
24 1/2"
30 1/2"
30 1/2"
30 1/2"
24"
24"
A/R
A/R
A/R
A/R
13.5
22
22
22
1 1/8"
1 3/8"
1 3/8"
1 3/8"
NOTE:
MOTOR
SIZE
HEAD
SIZE
LIST
PRICE
APPROX.
WEIGHT
12"
12"
$502.00
112 #
12"
16 1/2"
$584.00
126 #
16 1/2"
16 1/2"
$712.00
146 #
16 1/2"
20"
$794.00
173 #
20"
20"
$910.00
209 #
20"
24 1/2"
$1,080.00
290 #
24 1/2"
24 1/2"
$1,536.00
378 #
24 1/2"
30 1/2"
30 1/2"
30 1/2"
$1,624.00
$1,858.00
488 #
614 #
A/R = As required
Prices are F.O. B. Lubbock, Texas and are subject to change without notice
LIST PRICE
&
DIMENSIONS
FOR
BASE PLATES
A
B
C
D
E
F
G
B.C.
APROXIMATE
LIST
WEIGHT
PRICE
15"
12"
1"
3/4"
AS REQUIRED
64 #
$260.00
18"
15"
1"
3/4"
AS REQUIRED
92 #
$300.00
20"
17"
1"
7/8"
AS REQUIRED
113 #
$344.00
22"
19"
1"
7/8"
AS REQUIRED
137 #
$392.00
24"
21"
1"
7/8"
AS REQUIRED
163 #
$426.00
26"
23"
1"
1"
AS REQUIRED
192 #
$484.00
28"
25"
1"
1"
AS REQUIRED
222 #
$546.00
30"
27"
1 1/4"
1 1/8"
AS REQUIRED
319 #
$690.00
32"
29"
1 1/4"
1 1/8"
AS REQUIRED
363 #
$766.00
34"
31"
1 1/4"
1 1/8"
AS REQUIRED
410 #
$824.00
36"
33"
1 1/2"
1 1/4"
AS REQUIRED
551 #
$1,008.00
40"
37"
1 1/2"
1 1/4"
AS REQUIRED
681 #
$1,088.00
44"
41"
1 1/2"
1 1/4"
AS REQUIRED
824 #
$1,358.00
NOTE:
Weights are approximate & may vary due to " G " diameter
Base plates are machined on one side
LIST PRICE
FOR
STUFFING BOXES
&
STUFFING BOX PARTS
PART
SIZE
LIST
PRICE
PACKING GLAND
1"
1 3/16"
1 1/4"
1 1/2"
1 11/16"
PACKING GLAND
PACKING GLAND
PACKING GLAND
PACKING GLAND
PACKING GLAND
$52.00
$56.00
$60.00
$64.00
$68.00
LANTERN RINGS ( 2 )
1"
1 3/16"
1 1/4"
1 1/2"
1 11/16"
LANTERN RINGS
LANTERN RINGS
LANTERN RINGS
LANTERN RINGS
LANTERN RINGS
$38.00
$40.00
$44.00
$48.00
$52.00
PACKING -- SEPCO - STYLE 402
THROTTLE BEARING
1"
1 3/16"
1 1/4"
1 1/2"
1 11/16"
BOX
BOX
BOX
BOX
BOX
1"
1 3/16"
1 1/4"
1 1/2"
1 11/16"
-----------
5/16" PACKING
5/16" PACKING
5/16" PACKING
3/8" PACKING
3/8" PACKING
$56.00
$56.00
$56.00
$60.00
$60.00
THROTTLE BEARING
THROTTLE BEARING
THROTTLE BEARING
THROTTLE BEARING
THROTTLE BEARING
$27.00
$26.00
$28.00
$32.00
$36.00
STUFFING BOX HOUSING
1"
1 3/16"
1 1/4"
1 1/2"
1 11/16"
$180.00
$188.00
$196.00
$204.00
$212.00
COMPLETE STUFFING BOX
ASSEMBLY
1"
1 3/16"
1 1/4"
1 1/2"
1 11/16"
STUFFING BOX ASSEMBLY
$352.00
$368.00
$384.00
$412.00
$430.00
Prices are F.O.B. Lubbock, Texas and are subject to change without notice.
FORGED STEEL FLANGES
150 # FLANGES
NOMINAL
PIPE SIZE
IN INCHES
3"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
30"
36"
3"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
30"
36"
WELDING NECK
SLIP-ON
BLIND
{----------------------------}
{------------------}
{------------------}
FLANGE
NUMBER
BOLT
BOLT
HUB
APPROX. HUB
APPROX. APPROX.
{------INCHES------} OF HOLES HOLE CIRCLE LENGTH WEIGHT LENGTH WEIGHT WEIGHT
O.D.
THICK
SIZE
7 1/2
9
10
11
13 1/2
16
19
21
23 1/2
25
27 1/2
32
38 3/4
46
15/16
15/16
15/16
1
1 1/8
1 3/16
1 1/4
1 3/8
1 7/16
1 9/16
1 11/16
1 7/8
2 15/16
3 9/16
300 # FLANGES
NOMINAL
PIPE SIZE
IN INCHES
DRILLING TEMPLATE
4
8
8
8
8
12
12
12
16
16
20
20
28
32
3/4
3/4
7/8
7/8
7/8
1
1
1 1/8
1 1/8
1 1/4
1 1/4
1 3/8
1 3/8
1 5/8
6
7 1/2
8 1/2
9 1/2
11 3/4
14 1/4
17
18 3/4
21 1/4
22 3/4
25
29 1/2
36
42 3/4
DRILLING TEMPLATE
2 3/4
3
3 1/2
3 1/2
4
4
4 1/2
5
5
5 1/2
5 11/16
6
5 3/8
6 3/16
12
16
21
25
40
56
86
111
141
153
188
270
375
530
WELDING NECK
1 3/16
1 5/16
1 7/16
1 9/16
1 3/4
1 15/16
2 3/16
2 1/4
2 1/2
2 11/16
2 7/8
3 1/4
3 1/2
3 3/4
9
13
14
18
27
37
59
79
101
112
146
210
319
401
SLIP-ON
13
19
21
29
47
69
102
139
177
214
274
423
681
1068
BLIND
{----------------------------}
{------------------}
{------------------}
FLANGE
NUMBER
BOLT
BOLT
HUB
APPROX. HUB
APPROX. APPROX.
{------INCHES------} OF HOLES HOLE CIRCLE LENGTH WEIGHT LENGTH WEIGHT WEIGHT
O.D.
THICK
SIZE
8 1/4
10
11
12 1/2
15
17 1/2
20 1/2
23
25 1/2
28
30 1/2
36
43
50
1 1/8
1 1/4
1 3/8
1 7/16
1 5/8
1 7/8
2
2 1/8
2 1/4
2 3/8
2 1/2
2 3/4
3 5/8
4 1/8
8
8
8
12
12
16
16
20
20
24
24
24
28
32
7/8
7/8
7/8
7/8
1
1 1/8
1 1/4
1 1/4
1 3/8
1 3/8
1 3/8
1 1/2
1 7/8
2 1/8
6 5/8
7 7/8
9 1/4
10 5/8
13
15 1/4
17 3/4
20 1/4
22 1/2
24 3/4
27
32
39 1/4
46
3 1/8
3 3/8
3 7/8
3 7/8
4 3/8
4 5/8
5 1/8
5 5/8
5 3/4
6 1/4
6 3/8
6 5/8
8 1/4
9 1/2
11
21
31
41
70
94
140
190
250
305
380
540
858
1233
1 11/16
1 7/8
2
2 1/16
2 7/16
2 5/8
2 7/8
3
3 1/4
3 1/2
3 3/4
4 3/16
8 1/4
9 1/2
14
21
28
37
55
76
115
163
220
280
325
492
779
1130
16
27
41
50
81
120
178
242
312
375
482
724
1403
2151
FORGED STEEL FLANGES
Working Pressures
ASA and API standards: Crane pressure - temperature ratings conform to those listed
in the American Steel Flange Standard.
ASA B16.51957 and the American Petroleum
Institute API Standard No. 000 Fourth Edition 1958
Cold Service: For temperatures between minus 22 degrees Fahrenheit and plus 100
degrees Fahrenheit the ratings shown in the table for 100 degrees Fahrenheit will apply.
Steam, Water, Oil, Vapor, or Air
Pounds Per Square Inch --- Non - Shock
Metal
Carbon
Steel
Temp.
150 lb.
300 lb.
600 lb.
900 lb.
1500 lb.
100 F
150 F
200 F
250 F
300 F
350 F
400 F
275
255
240
225
210
195
180
720
710
700
690
680
675
665
1440
1420
1400
1380
1365
1350
1330
2160
2130
2100
2070
2050
2025
2300
3600
3550
3500
3450
3415
3375
3330
PIPE SIZES
WALL THICKNESS
WEIGHT PER FOOT
PRESSURE RATING
NOMINAL
OUTSIDE
STANDARD
WEIGHT
MILL TEST
PIPE
PIPE
WALL
PER
PRESSURE ( PSI )
SIZE
DIAMETER
THICKNESS
FOOT
A - 53 B
X - 42
3"
3 1/2"
0.216
7.58
2500
3000
4"
4 1/2"
0.237
10.79
2210
2650
5"
5 9/16"
0.258
14.62
1950
2920
6"
6 5/8"
0.280
18.97
1780
2660
8"
8 5/8"
0.322
28.55
1570
2350
10"
10 3/4"
0.365
40.48
1430
2420
12"
12 3/4"
0.375
49.56
1240
2100
14"
14"
0.375
54.57
1120
1910
16"
16"
0.375
62.58
980
1670
18"
18"
0.375
70.59
880
1490
20"
20"
0.375
78.6
790
1420
24"
24"
0.375
94.62
660
1180
30"
30"
0.375
118.65
450
940
36"
36"
0.375
142.68
440
790
ProFab Corporation
Quality Assurance Manual
Oct-03
“Uncontrolled Copy”
PREFACE:
This Quality Assurance Manual carries the endorsement of the management of ProFab
Corporation, Lubbock, Texas, U.S.A. who will exercise their authority to see that these
procedures are followed as set forth.
________________________
Randy Wright
President/General Manager
________________________
Ken Ogle
Operations Manager
________________________
Clay Davis
Plant Manager
________________________
Lane Souder
Quality Assurance Manager
________________________
Dana Babbit
Office Manager
Page 1
ProFab Corporation
Oct-03
OBJECTIVES AND SCOPE:
The purpose of this manual is to establish basic, standardized quality assurance procedures
which will assure the quality, interchangeability, and reliability of the end product
manufactured by ProFab Corporation, Lubbock, Texas, U.S.A., and to ensure compliance
with customer contracts and / or purchase order requirements. Quality of a product comes
into being as a result of planned and integrated efforts by all elements of an organization.
Applicability:
Inspection
Manufacturing
Requirements:
Inspection and manufacturing personnel shall utilize the procedures outlined herein.
Changes, additions, or deletions to this manual shall be made by the Quality Assurance
Manager and / or the General Manager.
Inspection and manufacturing personnel shall use applicable specifications, drawings, and
other contract information to adequately fulfill their functions.
Additional detail inspection instructions and / or check sheets shall be prepared for special
process control and / or contractual requirements when stated on the Purchase Order and
accepted prior to the start of the order.
Quality Assurance will advise manufacturing of necessary Q.A. activities and will reference
such information on the bill of material. Manufacturing will incorporate this into special job
routing instructions.
In order to establish positive control of future changes made in this manual, each manual
shall be dated when a change is made to the manual.
Page 2
ProFab Corporation
Oct-03
TABLE OF CONTENTS
1. Distribution
1.1 Purpose
1.2 Requirements
Page 5
2. Receiving Inspection - Incoming Material
2.1 Purpose
2.2 Requirements
2.3 General
2.4 Accepted Items
2.5 Rejected Items
2.6 Raw Material
Page 6
3. Control of Rejected Material
3.1 Purpose
3.2 Requirements
3.3 Disposition
3.4 Material Return
3.5 Supplier Corrective Action Request
3.6 Material Review Board
Page 8
4. Gage Control and Calibration
Page 11
4.1 Purpose
4.2 Requirements
4.3 Gage Identification
4.4 Procedure for Gages Passing Inspection
4.5 Procedure for Gages Rejected
4.6 Calibration for Employee-Owned Measuring Equipment
Page 3
ProFab Corporation
Oct-03
FORM INDEX
Return to Vendor Tag
Non-Conformance Tag -- Rework
Non-Conformance Tag -- Scrap
Non-Conformance Summary
Material Return Notice
Supplier Corrective Action Request
Tool and Gage History Card
Employee-Owned Measuring Equipment Calibration Record
Page 4
ProFab Corporation
Oct-03
1. Distribution
1.1
Purpose
To establish a distribution list for the Quality Assurance Manual.
1.2
Requirements
Revisions, deletions, and / or additions to the Quality Assurance Manual are
to be approved by the Quality Assurance Manager and / or the General
Manager prior to distribution.
Distribution is as follows:
President / General Manager
Operations Manager -- Materials / Purchasing
Plant Manager
Quality Assurance Manager
Lead Inspector
Page 5
ProFab Corporation
Oct-03
2. Receiving Inspection -- Incoming Material
2.1
Purpose
This procedure applies to the inspection of all material received from
suppliers to determine if the specifications and requirements have been met.
The Receiving Department is to release to the Inventory Control Department
all material intended for use on company products. This material is to be
accompanied by a packing list, a purchase order, work order, and any
applicable certificates.
2.2
Requirements
The Receiving Department performs visual inspections and verifies all resaleable material received. Material is identified and examined for damage,
rust, and count in compliance to the purchase order. Upon acceptance, all
pertinent paperwork, purchase order, and packing list are given to the office
manager and entered into inventory or production after shipment is received.
2.3
General
The items which are accepted must meet the requirements specified in the
applicable drawings or specifications prior to being released to the shop or
inventory.
2.4
Accepted Items
All acceptable material is identified with the pertinent paperwork, such as the
Purchase Order, the Work Order, and MTR’s. Accepted material is released to
the Shop or Inventory.
When complaints are received on field or stock material, the Receiving
Department shall draw the entire lot of that part or product from the
Inventory and inspect for that characteristic.
Page 6
ProFab Corporation
Oct-03
Sampling analysis will be permissible, but the method to be used will depend
largely on the seriousness of the defect.
2.5
Rejected Items
All items found to be discrepant are segregated from the acceptable items and the
rejection report is prepared. A Return to Vendor Tag is prepared and attached to the
material.
Return to Vendor
2.6
Raw Material
All orders of raw material shall not be accepted without material certification and
chemical and physical analysis if specified. The Receiving Inspector processes the
raw material by acceptance of certification and applicable dimensional
requirements.
Page 7
ProFab Corporation
Oct-03
3. Control of Rejected Material
3.1
Purpose
The purpose of this procedure is to define the requirements and functional
responsibilities for reporting and processing material rejections. The
objectives are to ensure complete and prompt reporting of all discrepant
material, provide management with the resources for analyzing and
controlling rejections, and establish the means for reworking salvageable
parts.
3.2
Requirements
Any part not complying with all applicable drawings, standards,
specifications, etc., or any part suspected of noncompliance will be tagged
with a Non-Conformance Tag. Normally it will be done by a Quality
Assurance Inspector.
Non-Conformance Rework and Scrap Tags can only be removed by a member
of the Quality Assurance Department.
Rework Tag
Scrap Tag
3.3
Disposition of Parts
3.3.1 Rework
Upon completion of any rework to remove discrepancies, the part will
be reinspected. If found acceptable, the Inspector will remove this item
from the Non-Conformance summary.
Page 8
ProFab Corporation
Oct-03
3.3.2 Scrap
If the part cannot be economically reworked or used as is, it should be
approved by Material Review Board (MRB) as scrap. The Inspector will
verify the date, quantity of parts, part number, part description and an
explanation of the defect. The Inspector will sign the tag.
Q/C Manager will complete a Non-Conformance Summary Report and
return to production as necessary.
Non-Conformance Summary
3.4
Material Return
Q/C Inspector is to fill out a Material Return Notice when material does not
meet quality standards. This material must be tagged Return to Vendor and
moved to a designated holding area. Q/C Inspector should complete and
return the Material Return Notice to Production after each occurrence.
Production is to handle the return of material to the supplier.
Material Return Notice
3.5
Production is to issue a form called Supplier Corrective Action Request. This
form must be completed by the supplier and returned to production before
any other material can be received from the supplier.
Page 9
ProFab Corporation
Oct-03
3.6
Material Review Board
3.6.1 Purpose
The purpose of this procedure is to establish a plant committee to
review rejected material as requested by the Inspection Department or
the Machinist and advise the Inspection Department of the current
policy concerning level of acceptance criteria. This committee, the
Material Review Board (MRB), shall consist of the Plant Manager, the
representative from Inspection, and any designated substitutes.
3.6.2 Requirements
The Inspector shall prepare a Non-Conformance Summary stating the
reason for rejection and location on all parts waiting for MRB action.
Inspection will immediately notify the MRB and schedule a review no
later than one day from the date of rejection. Upon notification from the
inspector, the MRB will review rejected material.
The MRB will make disposition of the rejected material to:
3.6.2.1
3.6.2.2
3.6.2.3
Use as is
Scrap
Rework
After final disposition of the material as the MRB has instructed, the
Inspector will note on the Non-Conformance Summary and destroy the
tag.
Page 10
ProFab Corporation
Oct-03
4.
Gage Control and Calibration
4.1
Purpose
To establish a procedure for maintaining the accuracy of all tools and gages
used for the inspection of production and quality assurance equipment. All
standards are traceable to the National Bureau of Standards, U.S.A.
4.2
Requirements
The gage room attendance is responsible for the following:
4.2.1 Identifying, inspection, and calibrating gages used to measure
production parts.
4.2.2 Implementing and maintaining records of all gage inspections.
4.2.3 Calibration of quality assurance equipment.
4.2.3.1
The following is the Calibration Schedule for the gages and
measuring instruments belonging to the Quality Assurance
Department, the tool crib and the employees.
Equipment
Calibration Period
Vernier Instruments
Micrometers
Gage Blocks
Plug and Ring Gages
Thread Gages
Quarterly
Quarterly
Yearly
Yearly
Yearly
Page 11
ProFab Corporation
Oct-03
4.2.3.2
The calibration of measuring devices is scheduled in accordance
with gage, type of device and probability of a continued
unimpaired useful life including wear. The Quality Assurance
Department will be responsible for calibration due dates on all
items listed in 4.2.3.1.
4.2.3.3
Calibration of gages and instruments not within the capabilities of
the Quality Assurance Department shall be done by an
independent laboratory with standards of the National Bureau of
Standards.
4.2.3.4
Corrective Action. Any gage or instrument that cannot be
adjusted or repaired to meet the required standards of accuracy
shall be scrapped or discarded and replaced.
4.2.3.4.1
4.3
The machine shop manager will be advised by Q/A
when production gages or instruments must be
replaced and be responsible for such action.
Gage Identification
4.3.1 Control Numbers
4.3.1.1
Each gage will be assigned a control number which will
always have four numerical figures.
4.3.1.2
The control number will be permanently affixed to the
instrument. This can be done by etching, scribing or
stamping as dictated by the size and function of the
gage.
Page 12
ProFab Corporation
Oct-03
4.4
Procedure for Gages Passing Inspection
4.4.1 Record inspection findings on Tool & Gage History Card.
4.4.2 Determine and record next inspection period, based upon the frequency
of inspection interval shown on the card.
4.4.3 File History Card by week in which the gage is to be reinspected.
4.4.4 Return gage to its assigned location.
Tool and Gage History Card
4.5
Procedure for Gages Rejected
4.5.1 Prepare a Non-Conformance Tag supplying the control number,
description, size and reason for the rejection.
4.5.2 Denote on History Card that the gage is rejected. Record inspection
date and inspector, but omit next due date.
4.5.3 Forward the Non-Conformance Tag stub to the Plant Manager. The
Plant Manager and the Gage Room Attendant will determine one of the
following procedures.
4.5.3.1
Scrap the gage
Page 13
ProFab Corporation
Oct-03
4.5.3.2
Rework the gage
If the gage is to be reworked at an outside source, prepare a
purchase requisition, supplying the control number, the
description of each gage, the reason for repair, the company
recommended to perform the rework and the estimated
cost.
This requisition must be approved by the Plant Manager
and Q/C Manager. The gages will be forwarded to the
shipping department.
After the gage has been reworked, it must be completely
inspected and accepted before being placed in service.
4.5.3.3
4.6
Use gage as is
4.5.3.3.1
Note on History Card “OK to Use”, initialed by
the gage room attendant and the Plant Manager
and the date.
4.5.3.3.2
Remove the gage to its assigned location and
remove the Non-Conformance Tag.
Calibration for Employee-Owned Measuring Equipment
4.6.1 Purpose
To describe the system for controlling the calibration of employeeowned measuring equipment.
Page 14
ProFab Corporation
Oct-03
4.6.2 Application
Applies to employee-owned measuring devices used in the precision
measurement of deliverable products.
4.6.3 Definition
Employee-owned measuring equipment: outside and/or inside
micrometers, depth gages, Vernier calipers, and other similar precision
equipment.
4.6.4 Procedure
4.6.4.1
All employee-owned measuring equipment used in the
precision measurement of deliverable products must be
calibrated by the Measurement Control Department of
Quality Assurance.
4.6.4.2
Employees are required to submit this equipment for
calibration via the Tool Control Department’s Tool Crib.
4.6.4.3
The Measuring Equipment Calibration (MEC) Department
is to create and maintain an Employee-Owned Measuring
Equipment Record for each employee.
Employee-owned Measuring Equipment Calibration
Record.
4.6.4.4
Each tool is to be identified with the date of the most recent
calibration, and the stamp of the technician who performed
the calibration, and the date when the next calibration is
due. If the item is too small for this type of marking, a color
code or small identifying mark is to be used which is keyed
to independently maintained records that cite the same
data.
Page 15
MANUAL & C.N.C.
MACHINE CAPACITIES
MANUAL MACHINES
ENGINE LATHES
MAXIMUM SWING
MAXIMUM LENGTH
34"
240"
VERTICAL TURRET LATHES
MAXIMUM SWING
MAXIMUM HEIGHT
62"
60"
DRILL PRESSES
MAXIMUM HEIGHT
60"
C. N. C. MACHINES
HORIZONTAL MACHINING
CENTER
X - TRAVEL
Y - TRAVEL
Z - TRAVEL
39"
31.5"
31.5"
VERTICAL MACHINING
CENTER
X - TRAVEL
Y - TRAVEL
Z - TRAVEL
60"
30"
30"
MAXIMUM SWING
MAXIMUM LENGTH
MAXIMUM STEADY REST
30"
125"
23.5"
C.N.C. TURNING LATHES
F-HEAD STANDARD

Online Catalog

Transcription

Similar documents

Eloxite Corporation

r.6o)ic

WesTex Federal Credit Union

3207 34th St, Lubbock, TX 79410

5278 34th St, Lubbock, TX 79407

4841 50th St, Lubbock, TX 79414

Challenger 2/3 Level 0 Control

Compared to cold-tip thermometers

Flyer