flexible silicone hoses
Transcription
flexible silicone hoses
FLEXIBLE SILICONE HOSES FOR INDUSTRIAL ENGINES VENA LS ® Engineered and manufactured to your exact specifications LIGHTER THINNER STRONGER + 61% PRESSURE RESISTANCE new construction 2 -WEIGHT 49% SILICONE HOSES WITH POLYESTER REINFORCEMENTS FOR HEATING AND COOLING SYSTEMS VENA® SIL 200/240 STRAIGHT HOSE SAE J20 R1 Class A Material Silicone VMQ* (Vinyl Methyl Quality) Textile reinforcement SIL 200: 3 ply of polyester fabric SIL 240: 4 ply of polyester fabric Temperature range -60ºC to +180ºC (-76ºF to +356ºF) Standard wall thickness SIL 200: 4,2mm (+1/-0,5mm) | 0,17’’ (+0,04/-0,02’’) SIL 240: 5,2mm (+1/-0,5mm) | 0,20’’ (+0,04/-0,02’’) Length From 1 to 4m (3,8 to 13,12ft). Can be cut to smaller lengths upon customer request. Smooth outer and inner appearance. Suitable for use in straight lengths, with no bending requirements. It can also be supplied with another type of textile reinforcement (Aramide, fiberglass) Inner diameter ** mm 6 13 19 25 32 38 45 51 57 63 70 76 80 90 inch 1/4 1/2 3/4 1 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 2 3/4 3 3 1/8 3 1/2 bar (Sil200) 16,1 9,7 7,2 5,9 4,9 4,3 3,7 3,4 3,1 2,9 2,7 2,5 2,3 1,9 100 4 1,6 Working pressure *** ISO 1402:2009 bar (Sil240) psi (Sil200) 21,3 234 12,0 141 9,3 104 7,6 86 6,3 71 5,6 62 5,0 54 4,6 49 4,3 45 4,0 42 3,6 39 3,3 36 3,3 33 3,0 28 2,6 23 psi (Sil240) 309 174 135 110 91 81 73 67 62 58 52 48 48 44 bar (Sil200) 48,5 29,1 21,8 17,7 14,7 12,9 11,3 10,3 9,4 8,8 8,1 7,5 6,9 5,7 38 5,0 Bursting pressure *** ISO 1402:2009 bar (Sil240) psi (Sil200) 64,0 703 36,0 422 28,0 316 23,0 257 19,0 213 17,0 187 15,0 164 14,0 149 13,0 136 12,0 128 11,0 117 10,0 109 10,0 100 9,0 83 8,0 73 psi (Sil240) 928 522 406 334 276 247 218 203 189 174 160 145 145 131 116 * Other constructions available for higher pressure and temperature applications. ** Other diameters can also be manufactured. Please consult. *** Pressure data is noted at ambient temperature. Pressure values should be reduced by 20% for each increase of 100ºC (212ºF) LONG LIFE SILICONE HOSES Venair Long Life formulation and construction is the most technically advanced solution to extreme operating conditions and resistance to the modern aggressive coolants in the market. Venair silicone hose products are used by the largest Transportation Authorities and Fleet Companies worldwide to reduce warranty and maintenance down time. www.venair.com 3 STRAIGHT REDUCER Material: Silicone VMQ (Vinyl Methyl Quality) Textile reinforcement: 3 or 4 plies of polyester fabric Temperature range: -60ºC to +180ºC (-76ºF to +356ºF) Standard wall thickness 4,2mm (+1/-0,5mm) | 0,17’’ (+0,04/-0,02’’) Length: 100mm / 150mm (4’’ / 6’’) Smooth inner and outer appearance. Diameter* mm 18/13 19/16 22/18 22/19 28/22 28/26 32/26 32/28 35/28 36/26 36/32 38/22 38/25 38/28 38/32 38/36 40/35 45/32 Length inch 5/7 > 1/2 3/4 > 5/8 6/7 > 5/7 7/8 > 3/4 1 1/9 > 6/7 1 1/8 > 1 1 1/4 > 1 1 1/4 > 1 1/9 1 3/8 > 1 1/9 1 3/7 > 1 1 3/7 > 1 1/4 1 1/2 > 6/7 1 1/2 > 1 1 1/2 > 1 1/9 1 1/2 > 1 1/4 1 1/2 > 1 3/7 1 4/7 > 1 3/8 1 7/9 > 1 1/4 mm inch 100 150 4’’ 6’’ Diameter* mm inch 45/38 1 3/4 > 1 1/2 51/38 2 > 1 1/2 51/45 2 > 1 3/4 54/51 2 1/8 > 2 60/50 2 3/8 > 2 63/51 2 1/2 > 2 67/51 2 5/8 > 2 70/50 2 3/4 > 2 70/57 2 3/4 > 2 1/4 70/60 2 3/4 > 2 3/8 76/51 3>2 76/63 3 > 2 1/2 76/67 3 > 2 5/8 80/70 3 1/8 > 2 3/4 90/80 3 1/2 > 3 1/8 102/76 4>3 127/100 5>4 Length mm inch 100 150 4’’ 6’’ * Other diameters are available. ELBOW 90º / 45º / 135º Material: Silicone VMQ (Vinyl Methyl Quality) Textile reinforcement: 3 or 4 plies of polyester fabric Temperature range: -60ºC to +180ºC (-76ºF to +356ºF) Standard wall thickness 4,2mm (+1/-0,5mm) | 0,17’’ (+0,04/-0,02’’) Length of legs: 100mm / 150mm / 200mm (4’’ / 6’’ / 8’’) Smooth inner and outer appearance. Diameter* mm 6 8 10 13 16 19 22 25 28 30 32 35 38 40 41 Length* inch 1/4 1/3 2/5 1/2 5/8 3/4 7/8 1 1 1/8 1 3/16 1 1/4 1 3/8 1 1/2 1 9/16 1 3/5 * Other diameters and leg lengths are available. 4 Diameter* mm inch 100 150 200 4’’ 6’’ 8’’ mm 45 48 51 55 57 60 63 67 70 76 80 90 95 102 110 Length* inch 1 3/4 1 7/8 2 2 1/8 2 1/4 2 1/3 2 1/2 2 5/8 2 3/4 3 3 1/8 3 1/2 3 3/4 4 4 1/3 mm inch 100 150 200 4’’ 6’’ 8’’ REDUCER ELBOW 90º Material: Silicone VMQ (Vinyl Methyl Quality) Textile reinforcement: 3 or 4 plies of polyester fabric Temperature range: -60ºC to +180ºC (-76ºF to +356ºF) Standard wall thickness 4,2mm (+1/-0,5mm) | 0,17’’ (+0,04/-0,02’’) Length: 100mm / 150mm (4’’ / 6’’) Smooth inner and outer appearance. Diameter* mm Length* inch mm Diameter* inch Length* mm inch 25/19 1 > 3/4 60/50 2 3/8 > 2 32/25 1 1/4 > 1 63/51 2 1/2 > 2 mm inch 38/25 1 1/2 > 1 100 4’’ 70/50 2 3/4 > 2 100 4’’ 38/32 1 1/2 > 1 1/4 150 6’’ 70/60 2 3/4 > 2 3/8 150 6’’ 38/35 1 1/2 > 1 3/8 76/51 3>2 51/45 2 > 1 3/4 76/63 3 > 2 1/2 * Other diameters and leg lengths are available. VENA TECHNOSIL SAE J20R3 Class A Heater Hose Material: Silicone VMQ (Vinyl Methyl Quality)* Textile reinforcement: Polyester braiding Temperature range: -60ºC to +180ºC (-76ºF to +356ºF) Wall thickness: Variable, depending on diameter. Length: standard rolls of 76,2m (250 ft.) delivered on a plastic spool. Other lengths are possible upon request. Extruded hose with smooth inner and outer appearance. Meets the requirements of SAE J20R3 Class A standard for cooling systems in the automotive industry. Inner diameter Working pressure ISO 1402:2009 Outer diameter Bursting pressure ISO 1402:2009 mm inch mm inch bar psi mm inch 6,30 1/4 13,20 1/2 9,60 139 28,80 418 7,90 1/3 15,00 3/5 8,80 128 26,50 384 9,50 3/8 16,60 2/3 7,70 112 23,00 334 12,70 1/2 20,30 4/5 6,80 99 20,30 294 15,80 5/8 24,50 1 5,90 86 17,80 258 19,00 3/4 27,90 1 5,10 74 15,20 220 22,00 7/8 31,30 1 1/4 5,00 73 15,00 218 25,40 1 34,50 1 1/3 4,90 71 14,80 215 28,00 1 1/8 38,00 1 1/2 4,40 64 13,20 191 32,00 1 1/4 43,00 1 2/3 3,90 57 11,80 171 * Higher temperature and pressure resistant construction available. www.venair.com 5 SILICONE HOSES WITH INTERNAL SPIRAL FOR HEATING AND COOLING SYSTEMS VENA® SIL 700V Highly flexible plain silicone hose Material: Silicone VMQ (Vinyl Methyl Quality) Structure: Spiral steel wire between some plies of polyester fabric covered in blue silicone. Temperature range: -60ºC to +180ºC (-76ºF to +356ºF) Length: From 1 to 4m (3,8 to 13,12ft). Can be cut to smaller lengths upon customer request. Main characteristic: High flexibility due to the wire spiral. Smooth inner and outer appearance. Suitable for use where a small bending radius is required. Inner diameter* mm 10 13 16 18 19 22 25 28 30 35 38 40 inch 3/8 1/2 5/8 5/7 3/4 7/8 1 1 1/8 1 3/16 1 3/8 1 1/2 1 9/16 Working pressure** Bursting pressure** Bending radius ISO 1402:2009 ISO 1402:2009 ISO 1746:2000 bar 12,45 11,30 10,39 9,87 9,64 8,99 8,44 7,94 7,64 6,96 6,60 6,38 bar 37 34 31 30 29 27 25 24 23 21 20 19 mm 69 75 82 87 90 98 107 116 123 143 156 165 psi 181 164 151 143 140 130 122 115 111 101 96 93 psi 537 493 450 435 421 392 363 348 334 305 290 276 inch 2 5/7 3 3 2/9 3 3/7 3 1/2 3 6/7 4 1/5 4 4/7 4 5/6 5 5/8 6 1/7 6 1/2 Inner diameter* mm 45 48 51 55 60 63 70 76 80 85 90 100 inch 1 3/4 1 7/8 2 2 1/8 2 3/8 2 1/2 2 3/4 3 3 1/8 3 1/3 3 1/2 4 Working pressure** Bursting pressure** Bending radius ISO 1402:2009 ISO 1402:2009 ISO 1746:2000 bar 5,86 5,58 5,32 4,98 4,60 4,39 3,93 3,57 3,34 3,08 2,83 2,37 bar 18 17 16 15 14 13 12 11 10 9 8 7 mm 191 208 227 255 294 321 394 468 526 608 703 939 psi 85 81 77 72 67 64 57 52 48 45 41 34 psi 261 247 232 218 203 189 174 160 145 131 116 102 inch 7 1/2 8 1/5 9 10 11 4/7 12 2/3 15 1/2 18 3/7 20 5/7 24 27 2/3 37 VENA® SIL 800 Highly flexible convoluted silicone hose Material: Silicone VMQ (Vinyl Methyl Quality) Structure: Spiral steel wire between some plies of polyester fabric covered in blue silicone. Temperature range: -60ºC to +180ºC (-76ºF to +356ºF) Length: From 1 to 4m (3,8 to 13,12ft). Can be cut to smaller lengths upon the request of the customer. Main characteristic: High flexibility due to the wire spiral. Corrugated inner and outer appearance. Suitable for use where a very small bending radius is required. Inner diameter* mm 10 16 18 25 28 30 32 38 40 42 45 50 inch 3/8 5/8 5/7 1 1 1/8 1 3/16 1 1/4 1 1/2 1 9/16 1 5/8 1 3/4 2 Working pressure** ISO 1402:2009 bar 10,48 8,63 8,17 6,89 6,44 6,17 5,92 5,24 5,04 4,85 4,58 4,17 psi 152 125 118 100 93 89 86 76 73 70 66 60 Bursting pressure** Bending radius ISO 1402:2009 ISO 1746:2000 bar 31 26 25 21 19 19 18 16 15 15 14 13 mm 46 49 51 59 64 67 71 84 89 94 103 119 psi 450 377 363 305 276 276 261 232 218 218 203 189 inch 1 4/5 2 2 2 1/3 2 1/2 2 2/3 2 4/5 3 1/3 3 1/2 3 5/7 4 4 2/3 Inner diameter* mm 51 52 53 55 60 63 70 76 80 90 100 inch 2 2 2 2 1/8 2 3/8 2 1/2 2 3/4 3 3 1/8 3 1/2 4 Working pressure** Bending radius ISO 1402:2009 ISO 1402:2009 ISO 1746:2000 bar 4,09 4,01 3,94 3,79 3,45 3,26 2,85 2,53 2,33 1,86 1,45 bar 12 12 12 11 10 10 9 8 7 6 4 mm 122 125 129 136 156 168 200 231 253 313 380 psi 59 58 57 55 50 47 41 37 34 27 21 * Other diameters can also be manufactured. Please consult. ** Pressure data is noted at ambient temperature. Pressure values should be reduced by 20% for each increase of 100ºC (212ºF) 6 Bursting pressure** psi 174 174 174 160 145 145 131 116 102 87 58 inch 4 4/5 5 5 5 1/3 6 1/7 6 3/5 7 7/8 9 10 12 1/3 15 SILICONE HOSE FOR TURBOCHARGER SYSTEMS - INTERCOOLER VENA® SIL TURBO TURBOLOADER External material: Silicone VMQ (Vinyl Methyl Quality) Internal material: Silicone FVMQ (Fluor Vinyl Methyl Quality) Textile reinforcement: Aramide Temperature range: -60ºC to +200ºC, up to 220ºC for short periods of time. (-76ºF to 392ºF, up to 428ºF for shorts periods of time). Standard length: All of our standard or customized products can be produced with this option. Corrugated compensators are available (See table below). Application: Specifically used in turbocharger systems for industrial vehicles, due to its high capacity to withstand hydrocarbons and/or oil particles in the cooling pressurised air. Alternatives: a. FKM material instead of FVMQ silicone. b. Standard VMQ silicone instead of FVMQ silicone. ID Diameter* mm 50 50 60 60 65 70 70 76 76 80 80 85 89 89 89 89 89 95 100 100 100 100 114 Rings inch 2 2 2 1/3 2 1/3 2 5/9 2 3/4 2 3/4 3 3 3 1/7 3 1/7 3 1/3 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 3/4 4 4 4 4 4 1/2 Humps 3 5 3 5 4 3 5 3 5 4 7 4 2 3 5 6 7 5 3 5 6 7 4 Total length mm 160 200 160 200 200 160 200 160 200 200 300 200 100 160 210 250 300 210 160 210 250 300 200 2 4 2 4 3 2 4 2 4 3 6 3 1 2 4 5 6 4 2 4 5 6 3 Cuffs inch 6,3 7,9 6,3 7,9 7,9 6,3 7,9 6,3 7,9 7,9 11,8 7,9 3,9 6,3 8,3 9,8 11,8 8,3 6,3 8,3 9,8 11,8 7,9 mm 64 114 64 114 88 64 114 64 114 88 164 88 38 64 114 138 164 130 64 114 138 164 88 inch 2,5 4,5 2,5 4,5 3,5 2,5 4,5 2,5 4,5 3,5 6,5 3,5 1,5 2,5 4,5 5,4 6,5 5,1 2,5 4,5 5,4 6,5 3,5 VENA® SIL TURBO REDUCER Inner diameter* Humps mm inch 76/51 3>2 1 89/63 3 1/2 > 2 1/2 Rings Total length mm inch 2 127 5 2 3 152 6 89/76 3 1/2 > 3 2 3 152 6 102/76 4>3 2 3 152 6 102/76 4>3 1 2 127 5 102/89 4 > 3 1/2 1 2 102 4 102/89 4 > 3 1/2 2 3 152 6 * Other diameters can also be manufactured. Please consult. www.venair.com 7 VENA® VITOSIL Silicone hoses with an inner layer of FKM for conveying fuel, oils and chemical products. Excellent resistance to ozone and atmosphere in the harshest of outdoor environments. All of our standard or customized products can be produced with this option. SPECIAL APPLICATIONS Engineered and manufactured to your exact specifications VENA® SIL 200 R/A Oil-resistant silicone hose External material: Silicone VMQ (Vinyl Methyl Quality) Internal material: Silicone R/A (Oil-Resistant) Textile reinforcement: 3 plies of polyester fabric Temperature range: -60ºC to 180ºC (-76ºF to 356ºF) Standard wall thickness: 4,2mm (+1/-0,5mm) / 0,17’’ (+0,04/0,02’’) Length: From 1 to 4m (3 to 13ft). Can be cut to smaller lengths upon request. Smooth outer and inner appearance. Suitable for use in straight lengths, with no bending requirements. Application: Suitable for engine oils and other mineral oils up to +150ºC (302ºF) service temperature. Diameter* mm 6 8 10 13 16 18 19 22 25 28 30 32 35 38 40 44 45 inch 1/4 1/3 3/8 1/2 5/8 5/7 3/4 7/8 1 1 1/8 1 3/16 1 1/4 1 3/8 1 1/2 1 9/16 1 3/4 1 3/4 Working pressure** ISO 1402:2009 bar 16,17 14,03 11,50 9,70 8,27 7,50 7,27 6,17 5,90 5,40 5,13 4,90 4,57 4,30 4,13 3,83 3,77 psi 235 203 167 141 120 109 105 89 86 78 74 71 66 62 60 56 55 Bursting pressure** ISO 1402:2009 bar 48,50 42,10 34,50 29,10 24,80 22,50 21,80 18,50 17,70 16,20 15,40 14,70 13,70 12,90 12,40 11,50 11,30 psi 703 611 500 422 360 326 316 268 257 235 223 213 199 187 180 167 164 Diameter* mm 48 50 51 53 55 57 60 62 63 65 70 76 80 83 90 100 inch 1 7/8 2 2 2 2 1/8 2 1/4 2 3/8 2 4/9 2 1/2 2 5/8 2 3/4 3 3 1/8 3 1/4 3 1/2 4 Working pressure** ISO 1402:2009 bar 3,60 3,47 3,43 3,33 3,23 3,13 3,03 2,97 2,93 2,83 2,70 2,50 2,30 2,17 1,90 1,67 * Other diameters can also be manufactured. Please consult. ** Pressure data is noted at ambient temperature. Pressure values should be reduced by 20% for each increase of 100ºC (212ºF) 8 psi 52 50 50 48 47 45 44 43 42 41 39 36 33 31 28 24 Bursting pressure** ISO 1402:2009 bar 10,80 10,40 10,30 10,00 9,70 9,40 9,10 8,90 8,80 8,50 8,10 7,50 6,90 6,50 5,70 5,00 psi 157 151 149 145 141 136 132 129 128 123 117 109 100 94 83 73 VENA® SIL GLASS Straight silicone hose reinforced with fiberglass for high temperatures Material: High temperature resistant silicone Textile reinforcement: Fiberglass Temperature range: -60ºC to 235ºC, up to 250ºC for short periods of time (-76ºF to 455ºF, up to 482ºF for short periods of time) Length: From 1 to 4m (3 to 13ft). Can be cut to smaller lengths upon request. Smooth inner and outer appearance. Suitable for use in straight lengths, with no bending requirements. It is possible to produce any special shaped hose (e.g. elbow, reducer, etc.) upon request. High temperature resistant ALU protections Special aluminum coated fiberglass designed to protect a specific area or the whole silicone hose where focused high temperatures are present. All of our standard or customized products can be produced with this option. Custom engineered hose-fitting combination Fasteners which loosen due to vibration are a challenge in well-supported engine blocks. To keep engines blocks sealed and prevent leaks we offer different types of hose/ fitting combinations. These custom engineered connections help the engine block to withstand extreme heat and vibration, while reducing cost, assembly and warranty issues. www.venair.com 9 Custom engineered shapes From one-piece projects to serial production we support manufacturers and engineers in developing and producing hoses which fulfill all of your system requirements. Our silicone shapes are engineered and manufactured according to the customer’s needs, so that we deliver in accordance to drawing specifications or samples supplied by the customer. We produce hoses with a wide variety of constructions with different characteristics and mechanical properties so we can meet virtually all your requirements. Custom engineered ducting Custom engineered ducting is produced with layers of fiberglass coated with SILICONE or NEOPRENE with steel wire spiral inside the tube. All of our custom engineering ductings maintain the following main characteristics, light-weight construction in combination with high mechanical strength, flexibility, temperature resistance, and comply with the latest safety properties (flame, smoke, and toxicity). A special construction compliant with the M1 fire (UNE. 23.727-90) and F1 (NF F16-101) fume classification is also available. VENA® MT/MTD VENA® HT/HTD MT: One layer of fiberglass with neoprene and visible steel wire spiral inside the hose. MTD: Two layers of fiberglass with neoprene and steel wire spiral between the layers. It is possible to produce a special F1-M1 classification upon request. Temperature range: -55ºC to 125ºC (-67ºF to 257ºF) Length: From 1 to 6m (3 to 19ft) depending on the diameter. Available in diameters between 13 and 300mm (1/2’’ to 12’’). HT: One layer of fiberglass with silicone and visible steel wire spiral inside the hose. HTD: Two layers of fiberglass with silicone and steel wire spiral between the layers. Medium temperature 10 High temperature Temperature range: -55ºC to 260ºC (-67ºF to 500ºF). Up to 300ºC (572ºF) for shorts periods of time. Length: From 1 to 6m (3 to 19ft) depending on the diameter. Available in diameters between 13 and 300mm (1/2’’ to 12’’). Main standards and certifications - Fire behavior according to UNE EN 23.727-90 - Burning behavior I and M rating, and smoke and toxicity F rating according to NF F 16 101 with smoke density test according to NF X 10-702 and toxicity test according to NF X 70-100 - Burning behavior of material according to DIN 54837:2007, smoke development and toxicity according to DIN EN ISO 5659-2:2007 and DIN 5510-2:2009 - Flame propagation according to UL94 - Specific Optical Density of Smoke Generated by Solid Materials according to ASTM E662 - Surface Flammability of Materials according to ASTM E162 - Toxic gas generation from materials in combustion according to BSS 7239 - SAE J20 Class A for cooling systems - SAE J2006 style R1-R3 for Marine Exhaust hose - Vertical flammability test according to FAR/CS 25.853 Appendix F, Part I (a)(1)(ii) Horizontal flammability test according to FAR/CS 25.853 Appendix F, Part I (a)(1)(iv) Optical density test according to AIRBUS DIRECTIVE ABD0031 and AITM 2.0007 B Smoke and toxicity test according to AIRBUS DIRECTIVE ABD0031 and AITM 3.0005 - UNI CEI 11170-3 for air hoses used in the railway industry - SAE J2006 style R1-R3 and ISO/DIS 13363 for Marine Exhaust hose certified by DNV - Marine Exhaust Hoses Approved by Lloyd’s Register Any other specific Certifications according to specific customer requirements. Venair office. Sales Offices America Europe Miami | Santa Monica [email protected] T. +1 305 362 8920 Germany [email protected] T. +49 07141 9748653 Brazil [email protected] Spain [email protected] T. +34 93 786 4860 Asia Shanghai [email protected] T. +86 021-3868 8806 Beijing [email protected] T. +86 010-5982 2451 Bangalore [email protected] T. +91 804 901 6515 Vietnam [email protected] T. +84 837 700 360 Italy [email protected] T. +39 0131 243903 France [email protected] T. +33 437 85 08 60 Poland [email protected] T. +48 616 792 487 UK [email protected] T. +44 0141 952 4943 Switzerland [email protected] IMPORTANT: It is the user’s responsibility to ensure the suitability and safety of the VENAIR products for all intended uses. All the tests must be conducted in accordance with applicable regulatory requirements in order to determine the safety and effectiveness for use of the hoses in any particular application. Limited Warranty: For a period of 6 months from the date of sale, VENAIR warrants this product to be free from defects in materials and workmanship. Our only obligation will be to replace any portion proving defective, or at our option, to refund the purchase price thereof. User assumes all other risk, if any, including the risk of injury, loss or damage, direct or consequential, arising out of the use, misuse, or inability to use, this product. THIS WARRANTY IS IN LIEU OF THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. No deviation is authorized. VENAIR assumes no obligations or liability for any advice furnished by it, or for results obtained with respect to those products. All such advice is given and accepted at the buyer’s risk. Vena, Venair and the Venair logo are trademarks of Venair Ibérica SA. www.venair.com CAT 43 REV 00 EN-UK Copyright 2013 | Venair Group | All rights reserved
Similar documents
Hopespare Venair Industrial Hose
Length: standard rolls of 76,2m (250 ft.) delivered in a wood spool. Other lengths are possible upon request. Extruded hose with plain outer and inner appearance. Meets the requirements of SAE J20R...
More information