SENukeXCr Fast Start

Transcription

SENukeXCr
Fast Start
By Scott C. Gordon
Co-Founder of Xindexer and XinMaster
XinMaster SENukeXCr Fast Start
1
Terms and Definitions ..................................................................................................... 3
Basic SENukeXCr Setup ................................................................................................... 5
Captcha Solving ....................................................................................................... 6
Proxies/VPN/IP masking ......................................................................................... 6
Article Builder .......................................................................................................... 7
The Indexing Project ............................................................................................... 8
Hardware Setup ...................................................................................................... 9
SENukeXCr Options Settings ............................................................................... 10
XinMaster - What is it? .................................................................................................. 11
Nuke Data .............................................................................................................. 11
Content .................................................................................................................. 11
Import Nuke File ................................................................................................... 12
Run Scheduling ..................................................................................................... 12
Client Information ................................................................................................ 13
SERP Tracking & Client Reporting ....................................................................... 13
Xindexer – What is it? .................................................................................................... 14
The Xindexer2 Dashboard ................................................................................... 17
Current Xindexer Subscription Offerings ........................................................... 19
SENukeXCr – Why others fail ....................................................................................... 20
Google's automated link build defense system ................................................ 21
Defense #1 - Link Profile ...................................................................................... 21
Defense #2 - Non-Indexed Pages ....................................................................... 22
Bad input = bad output ........................................................................................ 22
The wrong approach ............................................................................................ 23
How to Succeed running SENukeXCr ......................................................................... 24
Good Link profile .................................................................................................. 26
Build a better foundation .................................................................................... 26
Mix it up ................................................................................................................. 27
Trending is the new buzzword ............................................................................ 27
Checking your output ................................................................................................... 28
Templates ........................................................................................................................ 30
The Numbers .................................................................................................................. 33
Managing your time and resources ........................................................................... 41
The Bottom Line ............................................................................................................. 44
The XinMaster 90-Day Challenge ............................................................................... 45
2
Terms and definitions
For all my communication and explanations I will use the following terms and
definitions. These are not approved or official, this is just how I use these words.
Nuke, SENuke, SENukeX, SENukeXCr - all the same.
Nuke, run, nuke run- When I use nuke as a verb - I mean run nuke one time for
one campaign.
Campaign - This is for one client or one group of websites working to win one
keyword group/cloud.
Keyword group/cloud - a common group of keywords we are trying to win.Google
will associate all these words as common. Different is different - In my opinion you
cannot win unlike keywords with one campaign. For example: I do a lot of work for
Real Estate agents. They all want to win "Homes" and "Real Estate." But Google
doesn't lump these keyword groups together, so I will need a site optimized for
keyword "Homes" and another one for "Real Estate". This would be two different
campaigns by my definition.
URL - In XinMaster the term URL is for the domains we control, or our sites. When
we are taking about SEnuke, URL or URLs are the pages that SEnuke creates. These
URLs are new web pages that contain our newly create links. URLs can contain one
or more of our links depending on your nuke settings.
Wizard - setting up a nuke run with the SEnuke wizard (not the Turbo Wizard).
*The XinMaster file import tool uses the wizard.
Bot - A Google robot program that searches for new web pages. Called robots (not
physical) are programs scanning with internet 24/7 following links looking for good
content to take back to Google and "index." They are very smart and have the
power to choose which pages pass or fail.
3
Index/indexed - Added to the searchable Google database. If we create new web
pages with our links on them and they are not indexed, they are not going to have
any effect on our search results. If Google is ignoring them they might as well not
exist. Meaning, we just wasted a lot of time and resources creating worthless links.
VPN - Virtual Private Network - a proxy service that redirects your internet through
a private network to hide your IP address. Some are better than others, and
connection speed is limited.
VPS - Virtual Private Server - rented server space - usually has a shared IP address
4
Basic SENukeXCr Setup
Google's first search algorithm was based on inbound links, and links are still a core
element upon which they rank websites. Google will claim otherwise and try to
scare the world into believing that link building will get your site blacklisted.
However, there are thousands of SEnukeXCr users who make their living pushing
sites to the top search result on Google for all manner of keywords. Many SEOs will
trash talk SENuke and many who have tried using it and failed, will also proclaim
that SENukeXCr doesn't work. See "Why others fail" section below.
SENuke is a tool to build links, like any tool, it is up to the operator to use it
effectively. Used correctly, SEnukeXCr will improve your rankings and create large
amounts of traffic. Set-up incorrectly or used incorrectly it is just a costly waste of
time, and can cause potential damage to a website. One of the shortcomings of
SEnukeXCr is that it assumes that its user know exactly what needs to be done and
it only provides the tools to accomplish that particular job. See the "How to succeed
running SEnukeXCr" section below.
Webmasters have developed many levels of defense against automated link
building. In order to successfully create pages and post links on their sites we need
to overcome all of these defensive measures. The first layer of defense webmasters
use is the captcha plug-in to stop automated account creation, the second is email
verification, the third layer is IP screening, and the fourth is to drop cookies that
record previous logins.
Google has created algorithms that attempt to identify links created by automated
systems. They also maintain lists of sites that have week defensesand are known to
host auto created links. Their primary means of defense is to disregard newly
created links that fit their algorithms or are hosted on flagged domains.If we go
through all the trouble of setting up and running SEnuke,creating new accounts,
verifying email addresses, overcoming all the other webmaster defenses, and
create pages with our new links and Google doesn't pick them up we have a done a
lot of work for nothing. Furthermore, if we create an unbalanced link profile or
create too many links pointing to our primary domain, we run the risk of having our
site penalized.
5
Before we can set-up everything in SENukeXCr we need to have all the support services in
place and have our hardware set-up correctly.
Captcha Solving
Most websites want more users and more good content.
However, hosting accounts for fake users and posting
automated content with our links in them isn't why they
are in business, so many Webmasters attempt to keep
the automated systems out and the captcha is the first Captcha Input
line of defense.
You pretty much can't run SENukeXCr without a captcha solving service. We have
seen great results using Death By Captcha. They charge 4x more to solve captchas
during their night shift. This is the primary reason we suggest running SENuke
during their day shift (They are based out of India so for users in the US, this means
running SENuke overnight). XinMaster's scheduling system will help you avoid
running during the higher rate times. As you become a more experienced nuker
you can dig a little deeper into tricks to save more money on captcha solving.
Captcha solving is mission critical so choose a service, set a budget and do what
you can within that budget. For many SENuke users the captcha budget is the
limiting factor to how many campaigns they run. SENukeXCr did a lot of work in
2013 to reduce the use of third party captcha solving. Zont SEO has some great
captcha saving information (as a note we default all higher level SEnukeXCr training
to ZontSEO). Thoughtful template selection can also lower your captcha expense.
Proxies/VPN/IP masking
The webmasters second line of defense it to block IP addresses that appear to
create multiple accounts.If you run SEnuke on your personal computer most of the
sites on the SEnuke list will mark your IP address and you will be blocked in a short
time. If you keep running SEnuke without using a proxyor redirecting your IP
address SEnuke will not be able to access many sites and your result will be suffer.
Please read what ZontSEO has to say about proxies here:
http://www.zontseo.com/senuke/advanced-tutorials/proxies-and-vpns/
6
For advanced users and users who can do a lot for themselves, collect a list of
proxies and use the SENuke tools. There are settings in the SENuke toolbox to
change your IP from the SENuke side. This will require some time, training, and
tinkering to make work but will produce the best results.
For beginners, the best solution is to find a good IP service or VPN (Virtual Private
Network) and use their network. We have always experienced good results with
Hide My Ass Pro VPN; however, some users report that their accounts were
suspended for running automated routines. Be sure to set your new VPN service to
change your IP address every X number of minutes. There are differing opinions on
how many minutes is optimal, but common sense suggests allowing enough time
for SENuke to run at least one project before changing IP addresses. Something like
every 25 to 65 minutes seems to work well.
SENuke sometimes has trouble creating and verifying account email address (in the
wizard - create new email address and verify) while running a proxy. If you are
having trouble with the email page in the wizard, disconnect your proxy or setup all
your nuke runs before you connect to your VPN. Choosing the right region is an
important setting - we want our IP to look as local as possible, logging into a USA
site from Australia to create a profile for a user in the USA looks a little fishy. These
IP networks don't have an unlimited number of IP addresses but the ones they do
have will look like public access ports and most webmasters will not block them for
fear of blocking out legitimate users.
This is another must have item, you just can't run SENuke without it. It's also
another good reason to use a separate machine. It's just not practical to run all your
internet use through a proxy.
Article Builder
Google says "Content is King" and you
need good content to succeed with
SENuke. Some users might have an
unlimited amount of content. If you are
not one of them, you will need an
account with Article Builder.
7
It is completely integrated into SENuke and XinMaster and it works so well there is
no reason to not use it. Best Spinner is also operating in the background, as you get
more familiar with the system keep digging,there's a lot to learn. Article Builder must have, Best Spinner - must have.
Kontent Machine
We are working on incorporating
the Kontent Machine into
XinMaster just like Article Builder.
More info when available.
CCleaner
CCleaner is a great free tool that you should run once a day to clear out your
browser memory and your recycle bin. SENuke creates a ton of temp files and they
should be dumped frequently. More importantly are the cookies dropped by many
of the sites SENuke visits. Webmasters have lost the battle with the captcha and the
IP blocking, so their last ditch effort is to catch you using the same machine over
and over by dropping a cookie in your browser memory. If you don't clear these out
SENuke will not be able to access many sites and again your results suffer. It's a free
download and a fast and easy step to improve your performance. Depending on
how many runs you do in a 24 hour period you may need to run CCleaner more
than once a day. Also - Read in the SENukeXCr forum and on Zont SEO about
advanced settings in the SENuke toolbox to clear your cache.
The Indexing Project
Building links that never get indexed is like throwing time and money down the
drain. Google can't stop us from creating links, but they still own the search engine
and they certainly can decide what to index and what to ignore.If we stop at just
building links, much of our work will be lost because Google will just ignore many of
our new links. We need to work these new links over a little bit to make sure we do
everything we can to get them into the Google database. Read more about Xindexer
further down the guide under Xindexer - What Is It?
8
Hardware Setup
Most new users start by using their primary computer to run SEnukeXCr. This is
perfectly fine and will suit your needs unless you are going to be working more than
a handful of campaigns. If you are going to use your primary computer, it's a good
idea to only run SENuke during the night and completely shut SENuke down during
the day. Because SENuke requires the use of a proxy and captcha solving is 4x more
expensive during daytime hours (in the Western world) it makes sense to do all of
your nuke runs at night. Your machine can get a lot done from 10 PM to 6 AM and
its usually shut down or sleeping during these hours.
Schedule all your nuke runs to start after your daily work is over. Shut down all your
regular day time software (browsers, email sever, SKYPE, everything). Start up
SENuke and your proxy solution or VPN service, run CCleaner, and let SENuke run
all night. First thing in the morning, shut down SENuke, disconnect and shut down
the proxy, run CCleaner and start your daily routine.
The way the SENuke scheduler works is to run one project after the next in the
order the template is designed. If you spread your run out over a few days SENuke
will run a few projects, wait 24 hours and run a few more depending on how it
breaks the template down. If you start a 21 project template spread over three days
starting at 10PM, SENuke will run the account creation projects first and the first
few projects on the list. 24 hours after the last project finished Nuke will start the
next project on the list and run the next few projects. 24 hours later Nuke will start
the last batch projects finishing around 2:30. Of course, this is just an example.
Some projects are faster than others. The point is that if you launch a run at 10:00
PM one night, the clock will creep forward each night as nuke works its way through
the scheduled projects.
It's a safe practice to start all your runs in the evening and Nuke will run them back
to back throughout the night. If you are running multiple campaigns overlapping,
the Nuke scheduler will fit it all together and run one project after the next. If you
shut Nuke down in the morning and all the scheduled projects are not complete,
SENuke will start working on those projects right where it left off when it is started
back up again.
9
Servers, Virtual Machines and TeamViewer
The best SENukeXCr setup is running on a dedicated windows install. You can setup
your proxies/VPN and run CCleaner between runs and it doesn't interfere with your
regular computer usage. Running with a proxy/VPN cuts your connection speed
down significantly and clearing out all your browser history a few times a day
makes daily computer work a hassle.
If you have a powerful computer you can run VMware or VirtualBox and create one
or more virtual machines to isolate SENukeXCr. Running a virtual machine with a
stripped down Windows install is a great setup. You can install only the software
and services needed to run SENuke and it is easy to manage. Used PC's with
enough power to run SENuke are inexpensive and can be setup to be easily
managed remotely with programs like TeamViewer. You will have a great setup
without a monthly fee and you can run nuke campaigns 24/7 without taking over
your personal computer. The only minor hassle is that you might need to connect a
keyboard and monitor occasionally to restart the machine.
Reach out for more information if you would like some help with your hardware
setup: [email protected].
There are also a number of third party providers that will rent you a server that is
set-up to run nukes remotely. As your needs grow, you can move from one set-up
to the next without too much hassle.
SENukeXCr Options Settings
SENukeXCr - Options menu - It is essential that every possible setting on all the tabs
are set up correctly. SENukeXCr is a complicated software system that is running a
very complicated set of tasks. The right set-up combined with the correct nuke data
will accomplish your goals. Running it with incorrect settings and/or incorrect data
and you are just wasting your time and money. Spend some time reading the
SENuke forum and get as far as you can on your own. Once you have your bearings,
feel free to reach out for some one-on-one help. I am happy to help all new users
get their SENukeXCr options set up correctly. Once you have read this guide – find
me on SKYPE at [email protected]. Send me a friend request we can screen
share and go through all your settings.
10
XinMaster - What is it?
Once you have everything set to run SEnukeXCr in place and read enough to start
putting runs together, it will occur to you that you need some system to organize all
your nuke data and manage a complicated schedule. Grand plans are easily
conceived but nearly impossible to execute without some kind of system. We need
to create variety in our keyword input. We want to run one template after the
next.We want to start a new run for one client every other day and every three days
for another client. We want to give more weight to one keyword group than
another. We need to keep track of what runs we have completed and be reminded
which runs are up next...
The more layers of complexity you add the more time you will spend just trying to
figure out who and what to run than actually setting up new Nuke runs.
XinMaster is a database system that helps you manage all your nuke data, create
weighted keyword and URL groups, and setup Nuke runs in a fraction of the time. It
also helps you manage the difficult problem of what campaign to run with which
template starting on which day and running for the right number of days.
Nuke Data - URLs, Keywords, TAGs,
Most users keep all their URLs, keywords and TAGs in spreadsheets and copy and
paste them into either the wizard or the turbo wizard. We now know that we need
to create variety in both our URLs and keywords that we nuke. We can do this
manually or use a third party weighted spinning tool. One major risk doing this is
"input error" when we copy and paste spun data into the wizard. Also copying and
pasting data into the wizard is a very time consuming process. We can use the
Turbo wizard, but it is pretty limited in setting up customized runs. We can save and
duplicate full wizard runs, but that goes against creating variety.
Content
For those users with content, XinMaster has some great tools that you can use.
However, most XinMaster users nuke content from Article Builder (or the Kontent
Machine). If you are an advanced user, you might pull an article down and do some
customizing to it before pasting it into the wizard. If you use the regular wizard and
11
create and spin content as you go building one detailed nuke run can take twenty
minutes to an hour to set-up, you also use Article Builder credits every time you
push the generate content button. If you use the Turbo Wizard each project pulls
new content from article builder and depending on the complexity of the template
you can burn through a lot of credits building just one run.
XinMaster pulls one new article from article builder (or the Kontent machine) for
the entire run, no matter how complex the template. XinMaster spins the articles
and formats all the nuke data prior to importing into Senuke. One click of the
mouse pulls the articles, spins it, adds your URLs, keywords, and TAGs and then
formats it for every project in the selected template.
Import Nuke File
Improve accuracy, increase variety, and save a lot of time.If you are running nuke
with any kind of volume, I know you dread setting up complicated runs. The time it
takes to copy and paste your way through the full wizard one time is painful enough
to dread the task. Doing it several times each day becomes a real time sump. If
there were no other reason to use XinMaster than merely the time it saves settingup nuke runs, then it is worth every penny! XinMaster takes all your data and
magically combines it with your content and creates an error free file that imports
directly into SENuke. Once the file is imported you just need to page through the
wizard checking on things and get and validate new email addresses for each
profile and push the Finish button.
Run Scheduling
This is one of the core functions of XinMaster. If all XinMaster did was to let you
know which campaign to run, how many profiles to use, which template to use, how
many links per, and how many days to spread the run over, it would be a pretty
cool system that would save you time and money. This is a hard task to accomplish
with a spreadsheet. It gets a lot harder when you want to assign different priorities
to different campaigns, even harder when you have several different over lapping
runs going on at any give time. The Run Scheduler is a key factor and once you start
using it you will never want to nuke without it.
12
Client Information
This is a limited function in XinMaster at this time. We have included client
information in the file structure to help you manage your campaigns and to assign
them priority depending on your needs. We may build billing and a CMS systems if
there is demand.
SERP Tracking & Client Reporting
This is also a future XinMaster service. Wouldn't it be nice to send out SEO clients a
slick professional monthly report with SERP history and all the vital numbers
pertaining to the performance of your service? We may build it if there is demand.
The amount of time XinMaster will save you every day is worth the small amount of
time you spend upfront getting XinMaster set up. Getting all your data into
XinMaster and learning the tools will take you a little time. We have addressed every
field in the wizard and the tools might look a little overwhelming, but all of the
advanced stuff can be skipped over. Once you have all your data and setting right
you will be able to set up ten complex nuke runs in about the same amount of time
it takes to set up one run without it.
13
Xindexer - What is it?
Xindexer2 is the service behind the Indexing project in SENukeXCr. A few years back
an indexing system to promote our own pages was conceived and built. It was
incorporated into SENuke with the SENukeX upgrade. Every user gets 50 URLs a day
free with their SEnukeXCr subscription. URL processing beyond that is by
subscription depending on the volume of URLs produced by each user. Some
advanced and technical users have their own systems index their links.
There are several other services out there that run different systems to get links
indexed. Running SENukeXCr without an indexing plan is a little like running without
a captcha solution or IP masking. It works and you will get results, but not the full
potential of each run.
Here's what happens when you run SENukeXCr without Xindexer. Keep in mind in
order to even operate SENukeXCr you have at minimum the following overhead;
nuke license, captcha budget, proxy, Article Builder, hardware, power bill, plus the
most important thing, your time setting up the run.
14
SENukeXCr runs and 1000 new URLs are produced. One of three things are going to
happen to these new URLs:
1.
A Google Bot finds all the pages quickly and immediately indexes all of
them (not likely)
2.
A Google Bot never even visits many of them
3.
A Google Bot visits many of the pages but does not index them. Some
Bot filter may have been triggered or it is programmed to overlook
new pages on sites that have been identified as hosting automated
links.
You just spent time and money creating links that may never even be picked up by
Google. A few notes about Xindexer:
•
Xindexer maintains a huge blog network and pays close attention to
bot activity.
•
We post trending content all day on our blog network and Google bots
eat it up.
•
We place links to your new URLs in our content and the Bots follow
those links to your new pages.
Here is what happens when you run SEnukeXCr with a Xindexer2 subscription.
SenukeXCr runs and 1000 new URLs are produced:
1.
All URLs produced attached to the Indexing project get sent to the
Xindexer server tagged with your SEnuke email address
2.
Xindexer pulls X number of URLs off the new list at midnight GMT and
puts them in the queue for the days posts.
3.
Over the next 24 hours we place links to all the URLs in the days queue
15
4.
Google Bots are swarming our sites all day and follow the links to your
new URLs
5.
The Bots don't have their spam filter on high alert because they are
browsing a site known for good content.
6.
After posting your URL we place it on hold for 7 days and we post it
again
7.
We repeat this post and wait process 4 times
8.
Over the course or 28 days we post your content 4 times on sites that
have confirmed Google Bot activity.
9.
By the time Xindexer is done with each URL Google knows about it and
if it's not Indexed, there are reasons, other than not having had a
chance to pick it up
16
The Xindexer2 Dashboard
Visit the dashboard at http://xindexer.com/dashboard/
1.
This is where your new URLs enter the system immediately after the
index project runs in SenukeXCr. Your new URLs get sent over to the
Xindexer server tagged with your SEnukeXCr user email address.We
use this tag to keep track of them and to associate them with your
account on Xindexer.
2.
These are all the URLs that are currently being processed in our
system.URLs can spend 28 days here.
3.
This list is the result of the work Xindexer does on your new URLs
4.
59% in the red circle - This is our current indexing rate - there are many
factors in play - URLs being dead or incorrect - Webmasters deleting
17
them between the time Xindexer2 starts and finishes - Google not
playing nice - etc...
There is speculation about everything that Google does, because they never divulge
anything about how they operate. It is highly likely that they now have several levels
of indexing. It is impossible to believe that Google has not acknowledged finding
URLs after having the bots visit a page with a clear path to them. All we can do is
produce correctly formatted links, make sure that Google knows about them and
hope that the numbers will be on our side.
I think indexing is one of the most important and least talked about steps by all
SENukeXCr users. Why spend all the time and money creating new links if Google
doesn't even pick them up? Everyone needs to spend some time and energy
making sure your new URLs get indexed. There are several good indexing services
not connected to SENuke. I think it's a huge pain in the ass to pull all the URLs out
and manually enter them into an indexing service to save a few bucks. Xindexer2 is
built right into SENuke and the indexing project sends all your URLs right to the
Xindexer server for processing. If cost is a problem, let us know and I will come up
with a plan that will meet your needs.
Use the Indexing Project wisely, it's not an all you can eat buffet.
The process Xindexer uses is resource intensive and users should use the indexing
project where it will do the most good. Adding the indexing project to everything is
a waste of resources and will only ensure that the links that need the most
attention get pushed to the bottom of the queue because of sheer volume. If you
run all your URLs through Xindexer - your higher quality links might not make the
cut because all your crappy Forum Profiles URLs are hogging all your bandwidth. I
believe template choice is one of the biggest factors in the indexing equation. Some
template designers just add the indexing project to everything. If you like a
particular template but notice this problem, you can make some changes to it and
save it under a different name.
Knowing the projects and the best use of Xindexer will help you decide which
templates to run. Read more under Templates.
18
All users get 50 URLs processed daily for free with their SEnukeXCr license. These
URLs are only run once on our network (not four times like premium URLs).
Xindexer offers plans to meet every level of production. As of June 1, 2014 we
permanently doubled all Xindexer offerings.
Current Xindexer Subscription Offerings
Subscription
SENukeXCr User
STARTER
BASIC
ADVANCED
POWER
EXTREME
CRAZY
CUSTOM
URLs per day
50
100
200
350
700
1000
2000
Your needs
Price per month
Complimentary
$14
$27
$45
$85
$110
$210
Email for price
19
SEnukeXCr - Why others fail
It's complicated
SENukeXCr has a pretty steep learning curve. The interface is different and the
entire system assumes that user knows what they want to accomplish and just
need the tools to get the job done.
SENuke - was built to automate link building. Early users knew exactly what needed
to be done and SENuke was built to accomplish that specific goal,"building lots of
links." It is up to the user to determine what links need to be built, SENuke just
provides a system to serve this purpose. Early users had their own lists of websites
that they wanted automated access to and SENuke built a system to log in, create
accounts, and publish. Over time SENuke took up the responsibility of finding new
sites to post to and created better ways to get in and post data. The SENukeXCr
(SENukeX + Crowd Sourcing) update gave users the ability to share lists and
templates.
SENukeX - big update - new tools more projects but the same multi-window
interface.(If the interface works and all the core users like it, why re-invent it.)
SENukeXCr - another update - add crowd sourcing and refined some tools interface remains the same.
The latest version of SENuke still assumes the user knows what they want to
accomplish. They provide the tools and keep the magic up and running, (BTW this is
no small task). But it is still up to the user to learn how to use the tools and know
how to set runs up correctly to achieve a positive result.
Important Notice!
Since the launch of SENukeXCr the SENuke community has not really risen to the
challenge of crowd sourcing new templates and lists of new sites to use in SENuke.
As a result the list of workable sites in SENukeXCr is shrinking instead of growing.
20
Zont SEO is now the template and site list authority. Subscribe to Zont SEO and use
their Spetsnaz Link Tool to update your SEnukeXCr site list. It is easy to use and will
ensure that you have the highest number of sites available.
Google's automated link build defense system
Google is very reactive, SEO's find something that works and they exploit it until
Google develops an up-date to counteract that particular weakness. SEO's find
another crack in the Google system and they exploit that until Google reacts...
This has been going on for a long time. It's a cat and mouse game - SEO's find a
hole and exploits it until Google pounces and closes the gap. Google makes a high
profile example of a few sites that have pushed the limits too hard and scares the
world into not doing X because it is against their user agreement. I could speed talk
for a week about this stuff, but in the end we can agree that Google doesn't want us
to be able to have any control over their Search Engine Result Pages, and we want
to be able to control our SERPs, so we (the mice) need to be smarter than the Cat.
We know that Google wants to squash automated link building and punish anyone
using it, so we need to use SENukeXCr very wisely.
Defense #1 - Link Profile
Google maintains a copy of the entire Internet and they have the resources to
correlate all that data. It's not very hard for them create an algorithm to identify
domains that have a disproportionate number of links. If you run SENuke pointing
links directly to your primary domain, you can and will cause more damage than
good. Years ago this worked just great but now it is the road to ruin. We still need to
build links; we just need to do it on a higher level. We need feeder sites (buffer
sites) that point to our primary site. The more layers of feeder sites we have and
the higher authority of the domains in that network the better.
Ideally, you will already have most of these sites in place - Twitter, Facebook page,
Google+ page, Youtube channel, Blogger, Wordpress site, maybe a few other sites
where you promote your content. Build links to all these sites and a smaller
number to your primary site and you will get the results you are after. You can't
21
over nuke a Twitter or a Blogger URL, and all that link juice will flow right through to
your primary domain.
Defense #2 - Non-Indexed Pages
Google turns a blind eye to URLs that their algorithm tags as spam.Their Bots are
programmed to overlook anything that looks “phishy.”If they have identified a
domain known to allow automated posts (think... every domain that SENuke posts
to) the Bot will see the new domain and not take it back to the server for indexing.If
Google doesn't index our new links we just spent a lot of time and resources
creating links that are not going to get us anywhere.
Xindexer2 is build right into SENuke and can index many of your links.Look at your
production and get a subscription that is appropriate to your volume. This is not a
blatant advertisement for Xindexer... and you shouldn't just run all your URLs
through Xindexer. It's not practical to connect the indexing project on every project.
Form profiles for example create far too many URLs to justify the cost of indexing
with Xindexer.
RSS and Pinger -The Social Bookmarks and the Social Network projects both spit out
an RSS feed, so you should use the RSS project to index these URLs. Pinger works
great to index Press Release and Forum Profile URLs. You can even use one project
to index another; the bottom line is that you must work to get all your new URLs
indexed one way or another.
Bad input = bad output
As with any computer program - the saying goes "garbage in - garbage out". With
SENukeXCr this is compounded a few thousand times. SENuke is taking your data
(URLs, Keywords, content, TAGs) and posting it to thousands of sites. If you set up
and run a campaign with bad data SENuke is going to create thousands of broken,
dead, and garbage links. When you make setup errors you wasted time and
resources. Damage is caused when entering the correct information with the wrong
setup. Here are a few examples of what not to do:
22

Do not run nuke to one domain address - deep pages are still the same
domain http://yoursite.com/deep_page_about_something is still the
primary domain

Do not use a short keyword list - Nothing looks more spammy that 10k
links to one domain with the same handful of keywords

Don't run the same template over and over - this creates a nice pattern
for Google to see and your results might be negative.

Don't run SEnuke without the right set-up: Catcha solving, IP masking,
Clear cache.If you do, you will be blocked or most of your new links will
be removed by the webmaster, wasting time and resources.
The wrong approach
Don't make the assumption that because others are having success using
SENukeXCr that all you need to do is turn it on and start blasting away. Users
getting good results are getting those results because they know what they are
doing and use SENukeXCr to increase their production.
SENukeXCr is an automated link building tool, it is not turnkey SEO in a box. You
need to understand SEO and use the tool to create a great link profile not just a
huge number of links. Learn early and make your time and resources count - don't
nuke blindly and hope it will work. Get some help to get pointing in the right
direction before you spend six months doing it wrong. The wrong approach will give
you a negative result and you will be another one of those people who used
SENuke and proved that it doesn't work. I think the thousands of people who make
a living running SENuke will agree that if you use it wrong, it doesn't work.
23
How to Succeed running SENukeXCr
I have been an SEO and local search expert for several years and have in-depth
knowledge of how Google works; however, SEO is a very speculative field and this is
only my opinion. I have been using SENuke every day for several years and I was a
user when it was still called SENuke. I have been around to see the SENukeX and
SENukeXCr upgrades and know more about how it works than all but a handful of
users. However, I will defer to Zont SEO for most SENukeXCr training and the real
deep stuff. XinMaster was built as an efficiency tool; we do not want to get into
SENukeXCr training business. This guide is to give you a good basic understanding
of SEnukeXCr and help you get your head around everything that is involved.
Start with sound SEO thinking
Use SEnukeXCr to push your site to the top. Create everything that Google is
looking for and use nuke in place of real people. Google will not be able to
distinguish the real thing from what you are doing and your site will rocket to the
top like a trending site. Much easier said than done and certainly not as easy as
install and push the go button. SEO is a very opinionated field of endeavor. There is
the Back Hat world and the White Hat world and a lot of self proclaimed experts
everywhere you turn and you don't need a degree in SEO to be successful.
Let's take a look at a site that ranks #1 on Google for any particular keyword.This is
like the story of the real deal - a website is #1 on Google for X keyword, lets break
down why Google put it there.
1.
The site is well built and has a lot of good content. The onsite SEO is
good and the content is well written and is keyword specific.
2.
Whoever is running the site is active on Social Media and is doing a
good job promoting their content.
24
3.
The company has a youtube channel and an account on everything
Google offers
4.
They have a Wordpress blog and a blog on blogger/blogspot and they
post regularly
5.
They have content on other high PR sites and might even have a few
writers who post content for them scattered around the web.
Users visit the site and link back to it or one of the supporting sites.
1.
Users link to the home page and deep pages of the site with all kinds
of keywords, including "click here" "Read about this" (Inferno)
2.
Users tweet about it - link to the twitter page
3.
Users post on facebook about it
4.
Users add the URL to some of their social media sites
5.
Users find extra content on the support sites (Wordpress, blogger,
etc...) and link to those pages, again with all kinds of keywords
6.
Users link to pages on other sites that link to sites that link to the
content that link back to the home page. This could be who knows how
many sites away???
Google takes all this data and assigns search results according to their current
algorithm. The more of this user activity (Buzz) the higher the search results for the
page for any given keyword.
It's messy and all over the board because it happened organically. People reacting
to content and linking it or other related pages and content. It's a complete mess
and Google's super computer uses complex models and algorithms to sort it all out.
It is these complex models and algorithms that we are trying to beat. I don't think
25
"beat" is the right word. We are trying to look as close to the real thing (the organic
success story) so Google gives us the same high search result it assigns to sites that
fit their model of a trending website for a given keyword.
Good Link profile
To win a target keyword group, just make it look like the real thing and there is no
way the Google machine can tell the difference. We don't have the tools to tweet
and post on facebook, but we can do everything else with SEnukeXCr.But before we
can start we have to build the real stuff first.We must have at the very least 1,2,3, &
4 from above. And yes... you will need a complete set for every different keyword
group you are after. If you are doing local search there are a lot more pieces but the
content part is easier. Once we have all of the core built and the website has good
content and all the onsite SEO is done to the best of your ability we are almost
ready to start nuking.
Twitter, Facebook, Blogger, Google+, etc, all need to be correctly set up and in
motion. If you add new content to your site you need to promote it. Repost the
content to the support blogs and tweet all those pages. You can't just jump to the
front of the line without doing this work. SENuke is great at building links, but their
needs to be more than just one webpage to link to. 10,000 inbound links to one
domain with perfectly formatted keywords is not a winning strategy, in fact that's
probably the best way to get deindexed, post Panda. How hard it is for Google to
see that you are creating automated links?
Build a better foundation.
SEO gets harder every day; you can't just build a sales page and get it to rank well.
At the bare minimum you will need:
1.
A well-built primary site
2.
A network of supporting sites, the bigger the network the better -but
more work...
3.
Blogs - several of them - the more competitive the keyword the more
blogs you will need.
26
4.
Twitter
5.
Facebook
We then need to build links and create buzz for all these sites with a large keyword
cloud. Think about what Google is looking for and replicate it. Links to social media
sites, blogs and to the primary site. Set-up your SENuke runs to create that kind of a
link profile and you will be on the right track.
Mix it up
Now that we have everything built and are running SEnuke on a regular basis don't
be an idiot and run the same setup with the same template over and over. Anything
that will create a pattern is easy for Google to pick out. Change your URL groups,
mix up your keyword groups and run different templates all the time.
XinMaster makes this super easy with the way it schedules your nuke runs.
Trending is the new buzzword
We don't need 100k links to win - we need a nice steady stream of quality links to
win. Running a huge complicated template every few days might create a ton of
new URLs but it costs a fortune in captcha and indexing. Brute force is less and less
effective and potentially damaging. Why spend the extra money and run the risk of
killing your site when running SEnuke smarter costs less and has a longer lasting
effect? Quality over quantity.
27
Checking your output
SEnuke is accomplishing a very complicated routine from beginning to end. Any
errors can only be detected by looking at the end product.This is a pain in the ass
for sure but you should check your output occasionally.Open up SEnukeXCr - open
a recently completed run and select the URLs tab.
Take a look at the number of URLs each project produced.
28
Double click a list to open it up. You will get a new window like this:
Copy one of the URLs and paste it into a browser
Find your link and open it up.
29
This link is a link to another page created by SENuke. Some templates are set up to
build links to links (T2 – T3) you need to follow these links all the way to their
intended destination to make sure everything is set up properly.
We are looking to see if our keyword looks good and if the link is good.Follow the
link all the way to your intended domain.If there are errors you will need to
backtrack the problem and make the needed changes.If everything looks good then
your set-up is good.
Remember to check your results on a regular basis as error have a tendency to
creep in unannounced.
Templates
Which templates to run? There are a lot of differing opinions here. You either need
to study all aspects of SEnuke and build your own or trust an expert and use theirs.
Just randomly connecting projects and pressing the "GO" button is probably not the
smartest course of action. Years ago when quantity ruled over quality, you could
run just about anything and get a decent result.
Since the last few Google updates I think users need to run Nuke smarter not
harder. I don't want to get into a debate about who designs the best templates or
start poking holes in templates that others have designed. However, I do believe in
letting common sense guide your decisions. If you don't understand a crazy
complicated template it's probably not a good idea to spend all your time and
30
resources running it over and over again just because you read somewhere that it
was the best.
Zont SEO is the current SENukeXCr authority. They have the training and great
templates and a subscription with them is probably the best money spent on
anything SENuke related.
Here is a brief outline of all the SEnuke projects.Some of this information is a few
years old, but the projects themselves have not changed.I present them in the same
order they appear in the Project Linking window in Senuke.
Article Directory - No immediate URL output, the template builder doesn't even
allow connecting anything to it. These are probably the best links created by
SEnuke.
http://www.senuke.com/videotraining/transcripts/4.articleandsocialnukes.pdf
Press Release - Very few URLs - I like to use this project to promote the Wiki and
Wordpress project links.It looks more natural to promote something with a Press
Release and running it promoting new content makes more sense that to just try to
point links to a site unless it is a new blog post or something relevant. These are
good URLs to run the Indexer project
http://www.senuke.com/videotraining/transcripts/pressrelease%201.pdf
Social Bookmarks - No URLs but it produces a nice RSS feed so use the RSS project
to promote.Don't attach the indexer to this project as there is no URL output.You
can however use it to promote other projects.
http://www.senuke.com/videotraining/transcripts/socialbookmarking.pdf
RSS - This is a great tool to promote and draw attention to URLs produced by other
projects.It is not an indexing system, but it is supposed to promote content, so use
it to promote your Social network and Social Bookmark projects
http://www.senuke.com/videotraining/transcripts/RSSProject.pdf
Pinger - Use to promote forum profile project URLs
http://www.senuke.com/videotraining/transcripts/pinger-indexer-toolbox.pdf
31
Social Network - 20-30 URLs per profile per run. These URLs are perfectly matched
to the RSS project, Xindexeralso works nicely with these URLs.
http://www.senuke.com/videotraining/transcripts/4.articleandsocialnukes.pdf
Web 2.0 Profiles - large number or URLs, these are great links and it's a good
choice to run the indexing project on all of them.
http://www.senuke.com/videotraining/transcripts/web20profile.pdf
Forum Profile - creates a large number of URL and these links are among the
lowest quality links SEnuke can produce.If we are using the quantity over quality
this is the project to run all day long.This is also the fastest way to get your site in
trouble with Google.
http://www.senuke.com/videotraining/transcripts/forumprofile.pdf
Indexer - All URLs from the attached project get sent the Xindexer server for
processing.URLs are tagged with the SEnukeXCr users email address.Every user gets
50 URLs processed a day for free with their nuke license.Users can subscribe to
levels of service depending on their daily URL production.This project should be
used wisely as it has volume limits. Read more (links to the Xindexer page)
PDF - Very few URLs - URLs don't work well with RSS or Pinger so the Indexing
project is the only option to get them indexed.
Wordpress - produces a small number of URL , these URLs are golden and deserve
the full treatment in Xindexer
Wiki - Produces a fair number of URLs these URLs don't work well with RSS or
Pinger so the Indexing project is the only option for indexing.
There is an endless amount of information on the SEnuke forum, Zont SEO, and
Inferno about templates.This is an important aspect of running SEnukeXCr.Dig deep
enough so you can make informed decision about what templates to run.
We have built a set of 16 XinMaster templates - they are available for your use as
XinMaster members.
32
Important notice - Watch the site numbers in SEnukeXCr - some of the projects
have diminishing lists and you will need to acquire more sites to use these projects.
use the Zont SEO Spetsnaz Link Tool to keep your lists up to date and get the most
out of each project.
The Numbers
Understanding the numbers will help your overall nuke strategy and save you time
and money.
Numbers - Let's assume we have a template that includes 12 projects. Some
projects create a lot of links, some create only a handful of them. For
demonstration purposes and to keep the math simple let's say this template
creates 100 new URLs. Let's call this "Template12". I haven't done the math but let's
also assume that it will cost $0.50 in captcha solving for SENuke to get through
Template12 with one profile.
New run set-up #1
(Priority)
How often we start a new nuke run for a particular campaign. This number must
take into account most of the following factors so I will explain after the others.I put
it at the top of the list because it is the base number for all of the math.
Number of profiles
(volume)
SENukeXCr allows 1, 2, or 3 profiles per nuke run. This setting will double or triple
the outcome of any run. It will also double or triple the captcha solving cost per run.
Don't just blindly set-up all your runs with three profiles to get the most links
possible for any given run. This is a setting because it is not always smart to mash
your foot on the gas pedal and assume that more is better. Setting up a very
detailed run with custom content using the full wizard is time consuming and I
would select 3 profiles because of the time spent setting the run up. If I use just
setting up a run with the turbo wizard and was going to start another run for the
same campaign tomorrow I would probably select one profile.
Example runs:
33
1.
We run Template12 with one profile and we get 100 new URLs and
spent $0.50 on captcha
2.
We run Template12 with two profiles and we get 200 new URLs and
3.
We run Template12 with three profiles and we get 300 new URLs and
I like to think of the number of profiles as the volume setting on SENukeXCr.
Links per post/article (amplitude)
SEnukeXCr allows the user to set this from 1 on up.This can be a global setting on
the set-up page in the turbo wizard or on the second page (Common project
settings - A) in the wizard. SEnuke will place X number of links into or at the end of
each post or page for any given run. This is one of those quality over quantity
options.
Google is also on guard for spammy looking pages. What do you think a Bot will do
when it finds a new article on a site with 4 links on it? Probably tag it as spam and
move on. More than 4 links on one article? Spam for sure! We are spending time
and money creating links - if they look spammy to a Bot and get skipped over we
are spinning our wheels and not getting anywhere. I think the question is between
one link per postor two. I can't remember reading anything from any SENuke expert
suggesting that we try to include more than two links per anything.
So our choice is really down to choosing to add 1 link or 2 per article or post. 2 links
look good on a forum or Web 2.0 profile, 1 or 2 links looks good in an article, 1 link
looks good at the end of an article, Wiki page or PDF. We want our new URLs to get
picked up (indexed) by Google, if one link pages have a greater chance of getting
indexed than pages with two links one might by the way to go. However, we need to
consider is the cost of that second link. Once we have gotten past the captcha
adding one link or two costs the same. Let's do some more math.
From the three runs above:
34

Run #1 with 1 link per - 100 new URLs spent .50 cents on captcha = 100
new links

Run #1 with 2 links per - 100 new URLs spent .50 cents on captcha =
200 new links

Run #2 with 1 link per - 200 new URLs and spent $1.00 on captcha =
200 new links

Run #2 with 2 links per - 200 new URLs and spent $1.00 on captcha =
400 new links

Run #3 with 1 link per - 300 new URLs and spent $1.50 on captcha =
300 new links

Run #3 with 2 links per - 300 new URLs and spent $1.50 on captcha =
600 new links
I like to think of the number of links per article/post as the amplitude setting on
SeNukeXCr.
Important notice - links in the Article, Wiki, and Wordpress projects look best if
placed in context in the body of the text. This is not something we can accomplish
with XinMaster. With a little training you can add these links as you page through
the wizard after you import the XinMaster file.
Number of Days (frequency)
SEnukeXCr is designed to spread submissions out for X number of days. From
above Template12 containing 12 projects, assuming the toolbox isn't counted in
that number. We can run this template for a few days without any problems. I
found a 12 project template (XinMaster #6).
35
Some of the more complicated templates are designed to run for 10 - 20 days.
XinMaster makes setting runs up fast and simple and the scheduler keeps track of
when to run what and which template to use. There are a lot of good theories to
running SENuke and I am not going to argue with anyone about templates and days
to run... No matter whose Nuke theory you follow, XinMaster will make keeping
track of everything a piece of cake, saving you a bundle of time.
There is a lot going on in the background with SenukeXCr that we don't see when it
comes to templates and project lists. The tool SEnuke uses to build templates is
great and gives us a good understanding of what is happening. The wizard builds
the run and places all the projects in the order needed to follow the templates
mapped out link design. This is no small thing and I think it's a good idea the
SEnuke does not show all the gears working. The SEnuke scheduler is built to work
its way through projects one at a time as the template is designed. Many templates
have projects linking to other projects - the closet links to the money site get run
first - then the second level runs linking to the pages built by the last project.
36
Once the wizard puts it all together you can see the order in the main SEnuke
window. Here is the project list for Template12 shown above:
SEnuke already knows the order it is going to accomplish this list, and it is not top to
bottom if you were wondering... This run was put together with only one profile - if
there were two profiles everything would be doubled. If we spread this submission
out for 2 days - SEnuke will run 6 of the projects the first night, pause 24 hours and
run the last six. If we spread the submission out over 3 days - SEnuke will run the
first four projects, pause 24 hours, run the next four, pause 24 hours, run the last
four project and be done.
Start time
There are several things you need to consider with planning your run start
times.Most important is the captcha solving penalty. At least with Death ByCaptcha
- they charge a 4x premium for captchas solved during their night shift (South East
Asia). So for me on the West Coast of the USA I need to start my runs no earlier
than 6:30 PM and not run SENuke after 6:30 AM.
XinMaster has a great tool for this - just set your time zone and the XinMaster
scheduler will prompt you when to start your runs.
Next on my list of importance is to stagger my runs so I don't start two runs at the
same time. Depending on the power of your machine and your Internet connect
you can probably run more than one thing at a time - but I try to avoid it. Assuming
I have four runs to set-up to accomplish my daily nuking. I would start one at 6:30
37
PM the next at 8:30PM the third at 10:30 and the forth at 12:30 AM. This gives
SEnuke 2 hours to get a few projects done before starting the nest set of projects.
This isn't a perfect science but it fits my common sense way of doing business.
Running nuke on your primary machine while trying to do other tasks - I talked
about this a little earlier in the basic set-up section. It is just not practical to have
SENuke running while you are trying to use your computer for anything other than
very basic work. The VPN will kill your bandwidth and SENuke will by opening up
windows randomly. If you are anywhere in the western world this shouldn't be too
difficult to overcome. Just shut down SENuke first thing in the morning. Schedule
your runs anytime during the day. Start-up SENuke, run CCleaner, turn on your VPN
and let SENuke run all night long.
Creep
The scheduler works hard to get all the projects done as planned. From watching
nuke do its thing for a long time this is my observation as to how the scheduler
works. It even breaks is down, right in the projects window.
For 3 days = wait/pause for 3 days then start
Starting after X project - run after X project...
38
Here is a better view of the run order.
There is some of the deep stuff that we don't see happening, but a basic
understanding helps us get our head around the overall flow of things. Without
going too far into the weeds I will attempt to give you a line by line explanation of
what SEnuke has to do to get through this list.
At 8:30 PM night #1 - SEnuke is going to visit 522 websites and create new user
account.Not the easiest thing in the world. Nuke will have to get past captchas to
create these new accounts.Then wait a for each site to send a verification email to
the new nuke created email address that we validated in the wizard.Nuke has to log
into that email account and verify all the membership emails send my all the new
sites where it just created a new account.Once SEnuke verifies the emails the new
accounts are ready for a post. Without this step the host websites wouldn't allow
SEnuke to post anything on their sites.
When the Account creation project is complete and the emails are verified it will run
the two tool box projects (see where is says "After project Accou...")today's work will
be complete, let's say that took 2 hours and 15 minutes.
Night #2 at 10:46 PM (8:30 + 2 hours and 15 minutes plus 60 seconds) nuke will
start the next project in line - run a few project on the list.Let’s say that it takes a
little over an hour - finishing up at 11:00PM.
39
Night #3 (we are on start plus two days now) Nuke will start the next project on the
list at 11:01 PM and complete a few more of the scheduled projects.
Night #4 (starting day plus three days) Nuke will start up 24 hours after completion
of the last project on the list.
If the entire template would take 5 hours to run straight through, the clock would
creep forward 5 hours spread over X number of days. So if you start a five-hour run
at 8:30 PM and spread it out over three days - the last project should be complete
around 1:30 AM three or four nights later (depending on how nuke handles the first
day)
Template (Program/Channel)
The template you choose has a huge impact on the number of links created and the
structure they build. The more projects in the template the more links it will
produce. The more layers in a template the deeper those links will be. The simpler
the template the fewer number of days it should be spread over. The more complex
and the more layers the more days it must be spread over. Zont SEO is the
undisputed authority when it comes to SENuke templates.
New run set-up #2
(Priority)
How often to start Nuke runs, referred to as "Priority" is the base number for all of
the above referenced math. This is largely dependent on the Nuke theory that you
are using and closely tied to all the other factors. If you are running simple
templates over 3-5 days you probably need to start new runs every 3 to 5 days. If
you are running complex templates over 15 - 30 days, it will make since to start new
runs once a week or even more spread out. Getting your head around all this math
is the first step in coming up with the right Nuke plan for your sites. Figuring out a
way to manage the schedule you decide on will be a lot easier using XinMaster.
Setting your;priority, volume, amplitude, frequency, and channel.
Be smart and make it look natural. Let's say we picked up a new client or we just
built a new affiliate site. The site wasn't getting any new links on a regular basis last
week. Do you think it would look a little odd that all of a sudden out of the blue this
sites started getting thousands or new links? Yes it would look odd and we are not
40
looking to set off any alarms, we want to look organic. So we need to start off
creating a nice steady stream of new links and then slowly turn up the numbers. As
time goes by you can crank up all these settings and create as many links as needed
to win your keyword ranking.
Managing your time and resources
I hate spending my time doing time-consuming repetitive work. Setting up a nuke
run is one of those time consuming chores I always dreaded doing.
Time
It takes forever to copy and paste everything into all the fields, get new email
address and verify them for each profile. If I have a handful of runs to set up I know
that I am in for an hour of pain. What's even worse is that I know that I will have
that same hour of pain every time that I need to set up more nuke runs.
With XinMaster - I spent some time setting up each campaign, but the trade-off is
that I can set up very complicated nuke runs in just a few minutes. That hour of
pain is reduced to about 15 minutes. Over time that adds up to a ton of time saved.
I enjoy reading SENuke training material and I am consistently amazed at how deep
some users can go into the details. I am a believer in many of the nuke theories that
I have read and studied. However, just because I believe that such plans are the
best thing ever thought up, I can't even begin to implement many of them. I have
several different sites that I am working on. I have my own stuff, some work for
clients; I'm always starting new campaigns and ending old ones. To try to put
something super complicated together and actually execute over a long period of
time is easier said (or read) than done.
I used to use a spreadsheet to keep track of when to start a nuke run for each
campaign. I also needed to track how many profiles to use, how many days to
spread the run over, and which template I needed to use next. This is a workable
system, but it adds one more task to the run setup pain described above. Also after
I read Inferno I wanted to ramp up my run planning but with the volume of
campaigns I was running this became a management nightmare. Furthermore, I
41
don't need/want to nuke every campaign at the same level. Remember our five
nuke settings from the numbers section?
1.
2.
3.
4.
5.
Start new runs
(Priority)
Number of profiles
(volume)
Links per post/article (amplitude)
Number of Days (frequency)
Template
(Program/Channel)
We have 4 different setting to keep track of plus all the other moving parts running
SEnuke requires. We can't spend all day everyday just thinking about our SENuke
work! We are using SENuke to improve our website rankings - running SENuke
should not be a full time job, it needs to be something that we can do effectively in
as little time as possible. I also don't want to spend a thousand hours figuring out
how to use it.
XinMaster was built to solve this mess. You can use anyone's SENuke theory. You
can study materials from any of the SENuke experts. You can use the information in
this guide to set everything up. If you are already an advanced SENuke user, you
can set it up to do exactly what you want. It's a tool to use SENuke better, faster,
and more effectively.
You can set-up each campaign to run at different levels and XinMaster will keep it all
straight and let you know what need to be started each day. You can make changes
to anything anytime. You can set up a full wizard nuke run in about 5 minutes
instead of 25 minutes.
Resources
If we are running SEnukeXCr, we have some built in overhead. Our nuke license, the
hardware we are running it on, our internet connection, and a VPN service (or some
kind of Proxy solution). These are pretty much fixed expenses, we can run nuke all
day or once a month and these costs will be about the same. When I speak of
resources I am talking about the other nuke operating expenses: Captcha, Article
builder and Indexing. The cost of these services directly tied to the volume we run
42
SEnuke and the way we choose to run it.XinMaster can save your money on all
three of these operating expenses as follows:
Captcha - XinMaster can significantly lower the users captcha costs by setting up
each campaign to nuke at the right level and through better understanding,
strategy, and scheduling tools; setting the right frequency.
Article Builder - there are four ways to use article builder with Senuke.
1.
Use the Turbo wizard - SEnuke will pull a new article for each project in
the template that needs content, this is convenient but burns a lot of
credits.
2.
Use the full wizard - manually select content for each project as you
see fit.Uses fewer credits than the turbo wizard, but still uses credits
every time you pull new content.
3.
Pull one article from Article Builder, create a text file with the article,
copy and paste it into each project and spin it in the project
window.This uses the fewest number of credits, but is time consuming.
4.
Use XinMaster to create your nuke run.XinMaster pulls one article,
spins it and formats it for each project in the template.The links are
perfectly formed and you use the lease number of credits possible to
set-up each run.
Indexing - XinMaster will save you money indexing by:
1.
Offering XinMaster users discounts on all Xindexer2 plans
2.
Offering users bonus credits to blow out their back log (as needed&
upon request)
3.
Helping users understand the indexing project better and advising on
more productive use
43
4.
Scheduling system that better manages the amount of URLs being
created for each campaign
The Bottom Line
XinMaster is free to try for one campaign, if you need more than one campaign to
test it out, just ask and we will set you up. No matter how you use SENuke
XinMaster will help you save time and money.
Time
XinMaster will save you so much time that you will never want to set-upanSEnuke
run without it again.
Money
XinMaster can save you $49 a month on your Captcha costs alone with the
scheduler to manage your run priority. We will also throw in 200 URLs a day on
Xindexer2 to cover some of your production.
If you are using SENukeXCr...
You need XinMaster.
44
Sign up for an Advanced membership on XinMaster and get:

One-on-one SKYPE time to get one campaign set-up in
XinMaster

One-on-one SKYPE support for all XinMaster questions

Email support for SEnukXCr questions and problems

Basic 200 premium subscription on Xindexer2 ($27 value)
If after 90 days you don't feel like XinMaster is
saving you time and money we will give you a 100%
refund!
THE FINE PRINT
You must actually use XinMaster to set-upSEnukeXCr runs on a regular basis during the trial period.
The Xindexer2 subscription will remain active as long as you keep your XinMaster Advanced
membership current. SKYPE support is not an all you can eat buffet - We are here and happy to help
- please leave us enough time to get some other work done, and leave some time for other users.
The SEnuke community is not so large that we can't get to know everyone and we are always looking
for new friends.
45

SENukeXCr Fast Start

Transcription

Similar documents

ChiroMatrix – Published in Chiropractic

XinMaster User guide

140516_Beitragsservice ARD

Coventry Local School District to Waterloo High School

Google Play - Emmanuel College

“Phone-tastic” learning

The Architecture of Marcus Vitruvius Pollio