Porta SYSTEM - SISTEMI ROYAL doo

Transcription

Porta SYSTEM - SISTEMI ROYAL doo
w w w. p o r t a d o o r s .c o m
PORTA KMI Poland Sp. z o.o.
Po r t a
P r o d u c t s
C a t a l o g u e
S z k o l n a s t r. 2 6 , 8 4 - 2 3 9 B o l s z e w o , P o l a n d
phone: +48/58 677 81 00, fax: +48/58 677 81 99, e-mail [email protected]
P O R TA’s f a c to r i e s
P O R TA d e a l e r s n e t w o r k
Por ta Products
CATALOGUE
www.por tadoors.com
www.portadoors.com
Druk PORTA 299/10. Zlecenie 2010-3924-MP Data 10.02.2011
Porta veneers classification
Authorised Distributors
Baia Mare DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected], www.dedeman.ro
Especially for our Clients we have developed a classification of
finishes based on the European standards taking into account
external factors which directly affect the door surface durability.
The classification includes the following factors affecting the
doors and veneers in everyday use:
Cleaning agents
Humidity
Daylight
it is an inherent factor to any door usage.
The doors are exposed to many knocks and
scrapes associated with passage of people
whose hands are often busy with documents
or personal belongings and do not allow the
use of the doors properly. The leaf surface
must resist children games, and the pets do
not spare the doors when waiting for their
masters.
both house and office cleaning work requires
the use of cleaning agents which are not
neutral for the surface durability.
high air humidity affects veneer directly and
the veneer resistance to this factor guarantees
stability of the shape and uniformity of door
surface throughout the whole door life time.
this factor affects the changes of colour over
a long period of use. We have tested for you
all types of veneers and their reaction to
daylight during many year operation and we
may say with pride that our methods of door
finishing give very good results throughout
their whole lifetime.
HHIIII STANDARD
Interior acrylic paint
Porta basic class – it ensures long service life
for the household.
HHHIII STANDARD PLUS
Veneers: Portadecor, Portacortex, Super Matt
extended Standard class with improved
parameters of resistance to abrasion and
humidity.
HHHHII PREMIUM
Veneers: Portadur, natural standard, natural
select, PVC, acrylic paint, water-based varnish
(exterior)
a class with the highest average parameters,
which guarantee high functional value and are
designed for use in residential buildings and
offices.
HHHHHI PROFESSIONAL
Veneers: HQ CPL, polyester paint, PVC laminated
steel sheet
a class which combines functionality and
elegance wherever the doors are exposed
to a prolonged weather impact – they are
suggested for hotels, public buildings and
offices.
Bistrita-Nasaud DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539,
[email protected], www.dedeman.ro
Braila DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, suportclienti@dedeman.
ro,
www.dedeman.ro
Piatra Neamt IMPACT DISTRIBUTION, tel.: 0233 228 625, 0726 746 182,
[email protected]
Brasov DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Brasov RETCO, tel.: 0268 417 714, [email protected], www.retco.ro
Bucureşti ARABESQUE, tel.: 031 405 65 36, 0747 493 318, [email protected], www.arabesque.ro
Bucureşti AX PERPETUUM, tel.: 0743 098 447, [email protected],
www.perpetuum.ro
Bucureşti PRO-DIAS EXPERT DESIGN, tel.: 021 311 56 58, 021 300 29 08, 0726 711
355, [email protected]
Sibiu FLORIDA CONSTRUCT tel.: 0788 823 333, 0788.239.224, 0269 244 711, 0761
322 897, [email protected]
Bucureşti REI PRODIMEX, tel.: 021 410 87 88, 0726 388 601, office@reiambient.
ro,
www.reiambient.ro
Suceava DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected], www.dedeman.ro
Bucureşti WOODCOTE ROMANIA, tel.: 021.369.5775, 0727.810.771, fax:
021.369.5775, [email protected], www.woodcote.ro
Targu Jiu DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected], www.dedeman.ro
Buzau DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, suportclienti@dedeman.
ro,
www.dedeman.ro
Buzău PICO DO PRODEXIM, tel.: +40 238 723 188, [email protected]
Cluj AX PERPETUUM, tel.: 0740 018 047, [email protected],
www.perpetuum.ro
Cluj Napoca DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, suportclienti@
dedeman.ro, www.dedeman.ro
Cluj WOODCOTE ROMANIA, tel.: 0264 415 373, 0727 734 697, fax: 0264 415 535,
[email protected], www.woodcote.ro
Constanta LUXOR, tel.: 0723.313.248, [email protected]
Constanta DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected], www.dedeman.ro
Resistance to weather
STANDARD
STANDARD PLUS
PREMIUM
PROFESSIONAL
EXTREME
The diagram shows particular locations suggested by Porta for doors with different
types of veneer.
Timisoara, FILER IMPEX, tel.: 0722 596 030 [email protected]
Timisoara GESO GROUP, tel.: 0256 210 217, 0744 763 516, 0740 580 599
[email protected], www.geso.ro
Timisoara EDIL HOME, tel.: 0723 919 468, 0356 117 835 mateiu_elena@yahoo.
com,
[email protected], www.usiedil.ro
Timisoara EUROBAC, tel.: 0256 215 127, [email protected]
Tulcea DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, suportclienti@dedeman.
ro,
www.dedeman.ro
Turda AGROLIV, tel.: 0264 314 501, 0729 636 342, [email protected]
Vaslui DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, suportclienti@dedeman.
ro,
www.dedeman.ro
Moskwa ETALON, tel.: +8 495 95 3 17 76, [email protected]
Deva SIMAL EXIM, tel.: 0254 230 630, 0723 696 696, fax 0254 224 550, simal@
smart.ro, www.simal.ro
St-Petersburg SMART-COMPANY, tel.: +7 812 644 41 60 [email protected], www.smart-company.ru
Livezeni (jud. Mures), BTM DISTRIBUTION, tel.: 0728 606 061, 0728 606 066,
[email protected]
ECONOMIC
Timisoara DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected], www.dedeman.ro
RUSSIA
Iasi DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
HHHHHH
Targu Mures PLATINUM CORPORATION, tel.: 0744 796 442, 0365 816 900,
[email protected]
Deva QUASAR INDUSTRIES, tel.: 0254 206 293, 0722 228 451, dana.cazacu@
quasar.ro,
www.quasar.ro
Galati ROMDECOR, tel.: 0236 470 407, 0743 098 742, 0236 470 025, 0742 038 420,
[email protected], [email protected]
HHHHH
Targoviste DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected], www.dedeman.ro
Craiova EUROCASA, tel.: 0753 100 251, 0251 506 199, 0251 506 200, fax: 0251
506 200, [email protected], www.usieurocasa.ro
Focsani DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
HHHH
Targu Mures DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, suportclienti@
dedeman.ro, www.dedeman.ro
Zalau MULTICOM, tel.: 0260 606 122, 0260 606 123, fax: 0260 615 508,
[email protected]
Drobeta Turnu Severin DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539,
[email protected], www.dedeman.ro
HHH
Suceava REVINE IMPEX, tel.: 0767 563 235, [email protected],
Craiova CASA NOASTRA, tel.: 0251 429 532, 0729330644, www.casanoastra.ro
Deva R&G INDUSTRIES, tel.: 0254 236 244, 0254 231 845
HH
Sebes FLORIDA CONSTRUCT, tel.: 0788 823 333, 0258 823 333, 0258 733 070,
[email protected]
Sibiu AVI, tel.: 0269 248 080, 0727 200 101, [email protected], [email protected],
www.avi-f.ro
Constanta FIVE – HOLDING, tel.: 0241 588 899, 0241 588 933, [email protected],
[email protected]
H
Satu-Mare BIZMANN, tel.: 0726 376 984, [email protected]
Bucureşti PORTA BRAND B&M, tel.: 037 117 85 53, 0724 311 437, 0752 116 317,
fax: 037 117 85 53, [email protected]; www.usi-porta.ro
Comanesti DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected], www.dedeman.ro
High traffic
places
Roman DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Slatina DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Cluj INDY GO, tel.: 0723 505 938, 0264 265 065, 0264 403 535, [email protected],
www.indygo.ro
Hotels, offices,
public buildings
Rm. Valcea DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, suportclienti@
dedeman.ro, www.dedeman.ro
Bucuresti DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected], www.dedeman.ro
Cluj AGROLIV, tel.: 0264 314 501, 0729 636 342, [email protected]
Buildings, residential spaces with
a wide range of uses
Oradea PROGES, tel.: 0259 406 290, [email protected], www.proges.ro
Piatra Neamt DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, suportclienti@
dedeman.ro, www.dedeman.ro
Veneers: HPL, acidproof stainless steel
a class with parameters which guarantee
protection during intensive use of the models
with this type of veneer – it is designed for
places where crowds of people pass every
day.
Oradea EUROBAC ROMANIA, tel.: 0259 415 811, 0744 778 779, [email protected],
[email protected], www.eurobac.ro
Botosani DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected], www.dedeman.ro
Craiova DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Porta classification takes onto account six groups which include
all kinds of veneer used for Porta door ranges. Finishing quality,
durability, aesthetics – all of them are specified for each group
and we hope that our classification will help make optimum
choice and allow you to take best decision.
Bistriţa FRANCESCA COMSERV SRL, tel.: 0263 234 115, 0722 555 661,
[email protected]
HHHHHH EXTREME
Class
Abrasion
With each presented product information on veneer used is
provided:
Oradea DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Onesti DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, suportclienti@dedeman.
ro,
www.dedeman.ro
Oneşti SEPHARD CASA, tel.: 0040 34 31 01 05, [email protected]
Moscow ELITEL, tel.: +7 495 779 12 76, [email protected], www.elitel.ru
Moscow ROSPROOF, tel.: +7 495 933 75 63, [email protected], www.rosproof.ru
Kaliningrad PARTNERS, tel.: +7 911 470 80 62, [email protected]
St-Petersburg SMART-COMPANY, tel.: +7 812 644 41 60, [email protected], www.smart-company.ru
Smolensk VEGA AVANGARD, tel.: +7 4812 66 07 03, 38 75 24, [email protected], www.vegadveri.ru
UKRAINE
Kiev PORTA KMI UKRAINA Ltd, tel.: +38 044 566 04 24, fax +38 044 576 42 20,
[email protected], www.porta.com.pl
SERBIA
Novi
BelgradKMI
D.O.OPOLAND
<<PORTA DOORS>>
BEOGRAD,
tel.:the
+381
113 089to909,
PORTA
Sp. z o.o.
reserve
rights
+381
113 089
910, [email protected],
www.portadoors.rs
change
without
previous information
the technology of
production and construction of their products.
Any information provided in the catalogue shall not be
considered an offer in the meaning of the Civil Code.
Porta veneers classification
Authorised Distributors
Baia Mare DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected], www.dedeman.ro
Especially for our Clients we have developed a classification of
finishes based on the European standards taking into account
external factors which directly affect the door surface durability.
The classification includes the following factors affecting the
doors and veneers in everyday use:
Cleaning agents
Humidity
Daylight
it is an inherent factor to any door usage.
The doors are exposed to many knocks and
scrapes associated with passage of people
whose hands are often busy with documents
or personal belongings and do not allow the
use of the doors properly. The leaf surface
must resist children games, and the pets do
not spare the doors when waiting for their
masters.
both house and office cleaning work requires
the use of cleaning agents which are not
neutral for the surface durability.
high air humidity affects veneer directly and
the veneer resistance to this factor guarantees
stability of the shape and uniformity of door
surface throughout the whole door life time.
this factor affects the changes of colour over
a long period of use. We have tested for you
all types of veneers and their reaction to
daylight during many year operation and we
may say with pride that our methods of door
finishing give very good results throughout
their whole lifetime.
HHIIII STANDARD
Interior acrylic paint
Porta basic class – it ensures long service life
for the household.
HHHIII STANDARD PLUS
Veneers: Portadecor, Portacortex, Super Matt
extended Standard class with improved
parameters of resistance to abrasion and
humidity.
HHHHII PREMIUM
Veneers: Portadur, natural standard, natural
select, PVC, acrylic paint, water-based varnish
(exterior)
a class with the highest average parameters,
which guarantee high functional value and are
designed for use in residential buildings and
offices.
HHHHHI PROFESSIONAL
Veneers: HQ CPL, polyester paint, PVC laminated
steel sheet
a class which combines functionality and
elegance wherever the doors are exposed
to a prolonged weather impact – they are
suggested for hotels, public buildings and
offices.
Bistrita-Nasaud DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539,
[email protected], www.dedeman.ro
Braila DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, suportclienti@dedeman.
ro,
www.dedeman.ro
Piatra Neamt IMPACT DISTRIBUTION, tel.: 0233 228 625, 0726 746 182,
[email protected]
Brasov DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Brasov RETCO, tel.: 0268 417 714, [email protected], www.retco.ro
Bucureşti ARABESQUE, tel.: 031 405 65 36, 0747 493 318, [email protected], www.arabesque.ro
Bucureşti AX PERPETUUM, tel.: 0743 098 447, [email protected],
www.perpetuum.ro
Bucureşti PRO-DIAS EXPERT DESIGN, tel.: 021 311 56 58, 021 300 29 08, 0726 711
355, [email protected]
Sibiu FLORIDA CONSTRUCT tel.: 0788 823 333, 0788.239.224, 0269 244 711, 0761
322 897, [email protected]
Bucureşti REI PRODIMEX, tel.: 021 410 87 88, 0726 388 601, office@reiambient.
ro,
www.reiambient.ro
Suceava DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected], www.dedeman.ro
Bucureşti WOODCOTE ROMANIA, tel.: 021.369.5775, 0727.810.771, fax:
021.369.5775, [email protected], www.woodcote.ro
Targu Jiu DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected], www.dedeman.ro
Buzau DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, suportclienti@dedeman.
ro,
www.dedeman.ro
Buzău PICO DO PRODEXIM, tel.: +40 238 723 188, [email protected]
Cluj AX PERPETUUM, tel.: 0740 018 047, [email protected],
www.perpetuum.ro
Cluj Napoca DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, suportclienti@
dedeman.ro, www.dedeman.ro
Cluj WOODCOTE ROMANIA, tel.: 0264 415 373, 0727 734 697, fax: 0264 415 535,
[email protected], www.woodcote.ro
Constanta LUXOR, tel.: 0723.313.248, [email protected]
Constanta DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected], www.dedeman.ro
Resistance to weather
STANDARD
STANDARD PLUS
PREMIUM
PROFESSIONAL
EXTREME
The diagram shows particular locations suggested by Porta for doors with different
types of veneer.
Timisoara, FILER IMPEX, tel.: 0722 596 030 [email protected]
Timisoara GESO GROUP, tel.: 0256 210 217, 0744 763 516, 0740 580 599
[email protected], www.geso.ro
Timisoara EDIL HOME, tel.: 0723 919 468, 0356 117 835 mateiu_elena@yahoo.
com,
[email protected], www.usiedil.ro
Timisoara EUROBAC, tel.: 0256 215 127, [email protected]
Tulcea DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, suportclienti@dedeman.
ro,
www.dedeman.ro
Turda AGROLIV, tel.: 0264 314 501, 0729 636 342, [email protected]
Vaslui DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, suportclienti@dedeman.
ro,
www.dedeman.ro
Moskwa ETALON, tel.: +8 495 95 3 17 76, [email protected]
Deva SIMAL EXIM, tel.: 0254 230 630, 0723 696 696, fax 0254 224 550, simal@
smart.ro, www.simal.ro
St-Petersburg SMART-COMPANY, tel.: +7 812 644 41 60 [email protected], www.smart-company.ru
Livezeni (jud. Mures), BTM DISTRIBUTION, tel.: 0728 606 061, 0728 606 066,
[email protected]
ECONOMIC
Timisoara DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected], www.dedeman.ro
RUSSIA
Iasi DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
HHHHHH
Targu Mures PLATINUM CORPORATION, tel.: 0744 796 442, 0365 816 900,
[email protected]
Deva QUASAR INDUSTRIES, tel.: 0254 206 293, 0722 228 451, dana.cazacu@
quasar.ro,
www.quasar.ro
Galati ROMDECOR, tel.: 0236 470 407, 0743 098 742, 0236 470 025, 0742 038 420,
[email protected], [email protected]
HHHHH
Targoviste DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected], www.dedeman.ro
Craiova EUROCASA, tel.: 0753 100 251, 0251 506 199, 0251 506 200, fax: 0251
506 200, [email protected], www.usieurocasa.ro
Focsani DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
HHHH
Targu Mures DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, suportclienti@
dedeman.ro, www.dedeman.ro
Zalau MULTICOM, tel.: 0260 606 122, 0260 606 123, fax: 0260 615 508,
[email protected]
Drobeta Turnu Severin DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539,
[email protected], www.dedeman.ro
HHH
Suceava REVINE IMPEX, tel.: 0767 563 235, [email protected],
Craiova CASA NOASTRA, tel.: 0251 429 532, 0729330644, www.casanoastra.ro
Deva R&G INDUSTRIES, tel.: 0254 236 244, 0254 231 845
HH
Sebes FLORIDA CONSTRUCT, tel.: 0788 823 333, 0258 823 333, 0258 733 070,
[email protected]
Sibiu AVI, tel.: 0269 248 080, 0727 200 101, [email protected], [email protected],
www.avi-f.ro
Constanta FIVE – HOLDING, tel.: 0241 588 899, 0241 588 933, [email protected],
[email protected]
H
Satu-Mare BIZMANN, tel.: 0726 376 984, [email protected]
Bucureşti PORTA BRAND B&M, tel.: 037 117 85 53, 0724 311 437, 0752 116 317,
fax: 037 117 85 53, [email protected]; www.usi-porta.ro
Comanesti DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected], www.dedeman.ro
High traffic
places
Roman DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Slatina DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Cluj INDY GO, tel.: 0723 505 938, 0264 265 065, 0264 403 535, [email protected],
www.indygo.ro
Hotels, offices,
public buildings
Rm. Valcea DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, suportclienti@
dedeman.ro, www.dedeman.ro
Bucuresti DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected], www.dedeman.ro
Cluj AGROLIV, tel.: 0264 314 501, 0729 636 342, [email protected]
Buildings, residential spaces with
a wide range of uses
Oradea PROGES, tel.: 0259 406 290, [email protected], www.proges.ro
Piatra Neamt DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, suportclienti@
dedeman.ro, www.dedeman.ro
Veneers: HPL, acidproof stainless steel
a class with parameters which guarantee
protection during intensive use of the models
with this type of veneer – it is designed for
places where crowds of people pass every
day.
Oradea EUROBAC ROMANIA, tel.: 0259 415 811, 0744 778 779, [email protected],
[email protected], www.eurobac.ro
Botosani DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected], www.dedeman.ro
Craiova DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Porta classification takes onto account six groups which include
all kinds of veneer used for Porta door ranges. Finishing quality,
durability, aesthetics – all of them are specified for each group
and we hope that our classification will help make optimum
choice and allow you to take best decision.
Bistriţa FRANCESCA COMSERV SRL, tel.: 0263 234 115, 0722 555 661,
[email protected]
HHHHHH EXTREME
Class
Abrasion
With each presented product information on veneer used is
provided:
Oradea DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Onesti DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, suportclienti@dedeman.
ro,
www.dedeman.ro
Oneşti SEPHARD CASA, tel.: 0040 34 31 01 05, [email protected]
Moscow ELITEL, tel.: +7 495 779 12 76, [email protected], www.elitel.ru
Moscow ROSPROOF, tel.: +7 495 933 75 63, [email protected], www.rosproof.ru
Kaliningrad PARTNERS, tel.: +7 911 470 80 62, [email protected]
St-Petersburg SMART-COMPANY, tel.: +7 812 644 41 60, [email protected], www.smart-company.ru
Smolensk VEGA AVANGARD, tel.: +7 4812 66 07 03, 38 75 24, [email protected], www.vegadveri.ru
UKRAINE
Kiev PORTA KMI UKRAINA Ltd, tel.: +38 044 566 04 24, fax +38 044 576 42 20,
[email protected], www.porta.com.pl
SERBIA
Novi
BelgradKMI
D.O.OPOLAND
<<PORTA DOORS>>
BEOGRAD,
tel.:the
+381
113 089to909,
PORTA
Sp. z o.o.
reserve
rights
+381
113 089
910, [email protected],
www.portadoors.rs
change
without
previous information
the technology of
production and construction of their products.
Any information provided in the catalogue shall not be
considered an offer in the meaning of the Civil Code.
IF YOU ARE LOOKING FOR:
¡ High quality doors
¡ Innovative design
¡ Products having certificates and technical approvaLS
¡Tested solutionS for investment
¡ Extensive distribution network in Poland and Europe
¡ Professional after-sales servicE
FIND IT ALL IN THE PORTA DOORS CATALOGUE
5 year warranty
on all products
36 months
for the door leaves and frames
purchased in period:
from the 1st of july to 31st of december 2011
additional 24 months
for use of the authorized
assembly groups services
detailed rules available at:
http :// www. portadoors . com /hz /regulamin5lat
_ ez . pdf
S hould anyone attempt to write a history of doors based on the wealth of door descriptions,
designs and styles specific for different periods of history and different places, this would
be a fascinating story where social and political events affecting the fate of the world and
personal meetings happened behind the doors, with doors in the background or somewhere
in-between. We may say that doors represent an idea of a movable plane with the basic
function intended to separate different rooms, this idea being enriched by human intervention
from the very beginning. Therefore, the doors are not only a piece of an apar tment or public
space – first of all, they accompany human everyday activities: at work, during rest time,
in happiness, in conversation, when developing human relationships. Such an unexpected
look at the doors allows us to discover their quite surprising function.
Porta KMI Poland continues the best door production tradition and presents the catalogue
PORTA DOORS which will reveal the most recent door industry achievements as far as styles,
designs and technology are concerned. You will certainly be able to choose among so many
ranges and to start telling your personal story. All models represent the highest quality of
workmanship and operational reliability. We care about each detail of our products as the
Clients’ satisfaction is rewarding for the whole team of Porta KMI Poland.
BUILDING BRAND OF THE YEAR 2010
Porta KMI Poland S.A.
S z k o l n a s t r. 2 6 , 8 4 - 2 3 9 B o l s z e wo, Po l a n d
p h o n e : + 4 8 5 8 6 7 7 8 1 0 0 , Fa x : + 4 8 5 8 6 7 7 8 1 9 9 , e - m a i l : i n fo @ p o r t a . c o m . p l
w w w.por tadoors.com
INDEX
Interior doors
Flush door leaves MINIMAX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flush door leaves With applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Embossed door leaves LONDON, VIENNA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flush door leaves Porta DECOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flush door leaves Porta TWIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flush door leaves Porta GRANDDECO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flush door leaves Porta STYLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flush door leaves Porta FOCUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flush door leaves Porta FIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flush door leaves Porta NOVA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flush door leaves Porta LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flush door leaves CPL laminated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flush door leaves SLOT-MILLED. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Panel door leaves Porta CONCEPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Panel door leaves Porta IDEA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
8
10
12
14
16
20
22
24
28
34
36
38
40
42
new colors!
new colors!
new collection!
new colors!
new colors!
new models!
new colors!
new colors!
new collection!
Interior door leaves in natural veneer
Flush door leaves Porta CLASSIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Panel door leaves MALAGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Panel door leaves MADRID, CORDOBA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Panel door leaves TOLEDO, SEVILLA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Side panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flush door leaves Nova NATURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flush door leaves NATURE LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flush door leaves NATURE STYLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flush door leaves NATURE TREND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flush door leaves NATURE SPACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flush and panel door leaves NATURE CONCEPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
46
48
50
52
54
56
62
64
66
68
70
new colors!
new collection!
new colors!
new colors!
new colors!
new colors!
new colors!
new colors!
new colors!
new colors!
new colors!
76
78
80
82
84
new collection!
new collection!
88
90
92
94
new colors!
new colors!
new colors!
new solutions!
Sliding systems, folding doors
PORTA sliding door system, ALU sliding door system (on wall) . . . . . . . . . . . . . . . . . . . . .
COMPACT sliding door system (in to the wall) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Embossed wardrobe door leaves OXFORD, GENEVA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ALPHA, BETA folding doors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OMEGA double-leaf sliding doors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Interior entrance doors
AGATE, OPAL reinforced doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
QUARTZ fire-resistant doors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GRANITE anti-theft „C” class doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GRANITE PS anti-theft doors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Exterior doors
ROMA metal doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
WROCLAW doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GDYNIA doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Transoms for exterior doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
98 new models!
100
102
104
Technical and metal doors
27 dB, 32 dB sound retardant doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
42 dB sound retardant doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EI 30, EI 60 fire resistant doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ENDURO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AQUA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Metal door leaves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EI 30 fire resistant metal doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
108 new colors!
110 new colors!
112 new colors!
114
116
118
120
Door frames
MINIMAX door frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Porta SYSTEM door frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Porta SYSTEM ELEGANCE door frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PRESTIGE door frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Porta SYSTEM door frame for Gipsy Kings door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Transoms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Angle-bar small, large door frame, large folding door frame . . . . . . . . . . . . . . . . . . . . . . .
Adjustable metal door frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AGATEE, OPAL door frame, METAL sliding door system . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PROJECT door frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
124
126
128 new product!
130
132 new product!
134
136
138
140
142
Accessories and dimensions
Handles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Masking architraves, additional equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Door assembly dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Door sizes tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
144 Novelties!
147
149
150
Other information
Samples of colors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Porta CONTRACT (non-standard offer) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
Porta LINE flush door leaves
INTERIOR
doors
rom the very beginning Porta KMI Poland has specialized, and still
does, in internal doors intended for indoor use in apartments and
offices. It should be noted that internal doors cannot be installed as
apartment entrance doors or wherever temperature and humidity
conditions are adverse. A wide range allows each Customer to find a leaf
model of interest both in terms of design and price.
F
We offer flush doors finished with paint, wide colour palette of laminates,
synthetic and natural veneer, as well as frame-and-panel doors finished
with natural veneer.
High quality is the common feature of particular models. Customers may
be sure that they will purchase the highest quality product regardless
the price.
MINIMAX
With applications
Embossed LONDON, VIENNA
Porta DECOR
Porta TWIST
Porta GRANDDECO
Porta STYLE
Porta FOCUS
Porta FIT
Porta NOVA
Porta LINE
HQ CPL veneer
SLOT-MILLED
Porta CONCEPT
Porta IDEA
Enjoy the quality!
new colors!
new colors!
new collection!
new colors!
new colors!
new models!
new colors!
new colors!
new collection!
MINIMAX

NEW MODELS
MINIMAX doors represent an attractive range for the Customers who do not accept a compromise between lower
price and reduced product quality. We guarantee high quality of the product covered Portadecor veneer, which is
characterized by a much higher functional properties than the commonly used lacquered HDF (withdrawn from the
PORTA offer). We are the only company in Poland to offer popular white doors for which we use the double painted
eucalyptus wood panel – the best for this purpose.
full
6
small light
large light
small sash
medium sash
narrow light
AVAILABLE COLORS
DOOR LEAF CONSTRUCTION
Acrylic paint (interior)
The door leaf consists of a finger jointed softwood filled with stabilizing honeycomb core
or perforated chipboard reinforced with inner frame made of plywood (option at an extra
charge) and covered from both sides with HDF boards.

LEAF EDGE PROFILE
“K” profile leaf edge.
Both side edges and the upper edge of the leaf covered with leaf-colored skirting tape.
White
(RAL9016)
Portadecor veneer

FINISHING
The leaf is painted with new generation ecological water varnish or Portadecor veneer. The
light frame (made from MDF) and the sash frame (made of PVC) are made in the color of
the door leaf.
NEW
COLORS
Beech
Bavaria
samples of colors
MODELS
Cherry tree
Single-or double-leaf in all patterns.
Door leaf is available in version for sliding door without hinges and rebate and with
a groove for guiding element slot-milled in the bottom edge of the door leaf (included in
the system).
see pages 156-158
ACCESSORIES – INCLUDED IN THE LEAF PRICE
DOOR LEAVES – CROSS-SECTIONS
•
•
•
•
•
Two standard pintle hinges*
Three hinges for a leaf of dimension „100”
Lock: for regular key, bathroom lock or for cylinder insert
Pane (pattern ”chinchilla“)
Round flush handle (for sliding doors)
LEAF SIZES (PAGE 150, TABLE 1)
„honeycomb” stabilizing
perforated chipboard
PROFILE OF GLAZING FRAME
Single leaf*: „60“, „70“, „80“, „90“, „100”, „110” 1
Double leaf*: „90“ ÷ „200“ 2
DOOR FRAME (FROM PAGE 124)
•
•
•
•
patterns: small light, large light
MINIMAX door frame, fixed width: 60 mm and 100 mm
Adjustable Porta SYSTEM door frame
Adjustable PRESTIGE door frame
Metal door frame
NOTES
•
*
Paint-it-yourself leaves at the price of the Minimax white leaf.
Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
1 Available with perforated chipboard core only. Pane’s dimensions are the same as for „100” size.
2 Arbitrary selection of door leaf sizes for double doors. Passive leaf (side panels) with sizes „30”,
„40”, „50” only in full option.
ADDITIONAL CHARGES (OPTION)
„100” size
core: perforated chipboard
ventilation: grid, sleeves or undercut
third hinge for the leaf dimensions „60”, „70”, „80” or „90”
preparation for shortening up to 60 mm
bull’s eye made from stainless steel
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
hinge covers (set on one pc)
handle with escutcheon (page 144)
mat hardened pane – small light
mat hardened pane – large light
mat hardened pane – small sash
mat hardened pane – medium sash
mat hardened pane – narrow light
7
With applications

The basic feature of the doors with applications is their solid construction based on the MINIMAX leaf.
The possibility to choose decoration elements in two colors is another distinctive feature of this model.
pattern 1
8
pattern 2
pattern 3
pattern 4
pattern 5
pattern 6
AVAILABLE COLORS
DOOR LEAF CONSTRUCTION
Acrylic paint (interior)
The door leaf consists of a finger jointed softwood filled with stabilizing honeycomb core
or perforated chipboard reinforced with inner frame made of plywood (option at an extra
charge) and covered from both sides with HDF boards.

LEAF EDGE PROFILE
“K” profile leaf edge. Both side edges and the upper edge of the leaf covered with
leaf–colored skirting tape.
White
(RAL9016)
Application colours – veener
FINISHING
The leaf is painted with new generation ecological water varnish.
MODELS
Blue
samples of colors
Single leaf: full
Double leaves: full
Door leaf is available in version for sliding door without hinges and rebate and with
a groove for guiding element slot-milled in the bottom edge of the door leaf (included in
the system).
Beech
see pages 156-158
ACCESSORIES – INCLUDED IN THE LEAF PRICE
•
•
•
•
DOOR LEAVES – CROSS-SECTIONS
Two standard pintle hinges*
Three hinges for a leaf of dimension „100” and „110“
Lock: for regular key, bathroom lock or for cylinder insert
Round flush handle (for sliding doors)
LEAF SIZES (PAGE 150, TABLE 1)
„honeycomb” stabilizing
perforated chipboard
Single leaf*: „60“, „70“, „80“, „90“, „100“, „110” 1
Double leaf*: „120“ ÷ „200” 2
RECOMMENDED DOOR FRAMES (FROM PAGE 124)
•
•
•
•
MINIMAX door frame, fixed width: 60 mm and 100 mm
Adjustable Porta SYSTEM door frame
Adjustable PRESTIGE door frame
Metal door frame
NOTES
*
Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
1 Available with perforated chipboard core only.
2 Arbitrary selection of door leaf sizes for double doors.
ADDITIONAL CHARGES (OPTION)
„100”, „110” size
core: perforated chipboard
ventilation undercut
third hinge for the leaf dimensions „60”, „70”, „80” or „90”
preparation for shortening up to 60 mm
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
hinge covers (set on one pc)
handle with escutcheon (page 144)
9
LONDON, VIENNA

Classical design, elegance and high finish standard are typical features of London and Vienna doors.
High durability and refined technology make the product reliable and popular.
LONDON,
full
10
LONDON,
small light
LONDON,
medium sash
LONDON,
large sash
VIENNA,
full
VIENNA,
small light
DOOR LEAF CONSTRUCTION
Acrylic paint (interior)
The door leaf is filled with stabilizing inserts and covered from both sides with embossed
HDF boards.

LEAF EDGE PROFILE
“R” profile leaf edge. Both side edges and the upper edge of the leaf covered with
leaf-colored skirting tape.
White
(RAL9016)
FINISHING
PVC veneer
Light beech

Alder
samples of colors
The leaf is double varnished with acrylic paint or veneered with PVC woodlike veneer
(LONDON only). The light frame and sash (made of PVC) are veneered in the color of the
door leaf.
Apple tree
Golden
Oak
see pages 156-158
DOOR LEAVES – CROSS-SECTIONS
MODELS
• LONDON (PVC veneer or varnished).
• VIENNA (only varnished).
Single door: full, small light, medium sash, large sash.
Double doors: full, medium sash, large sash.
Door leaf is available in version for sliding door without hinges and rebate
and with a groove for guiding element slot-milled in the bottom edge of the door leaf
(included in the system).
ACCESSORIES – INCLUDED IN THE LEAF PRICE
•
•
•
•
stabilizing inserts
Two standard pintle hinges*
Lock: for regular key, bathroom lock or for cylinder insert
Pane (pattern ”chinchilla“)
Round flush handle (for sliding doors)
LEAF SIZES (PAGE 150, TABLE 1)
Single leaf*: „60“, „70“, „80“, „90“
Double leaf*: „120“ ÷ „180“ 1
PROFILE OF GLAZING FRAME
RECOMMENDED DOOR FRAMES (FROM PAGE 124)
• MINIMAX door frame, fixed width: 60 mm and 100 mm
• Adjustable Porta SYSTEM door frame
• Metal door frame
NOTES
all glazed models
*
Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
1 Arbitrary selection of door leaf sizes for double doors.
„wood grain” surface structure
ADDITIONAL CHARGES (OPTION)
ventilation: grid, sleeves or undercut
preparation for shortening up to 60 mm
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
hinge covers (set on one pc)
handle with escutcheon (page 144)
VIENNA,
medium sash
VIENNA,
large sash
11
Porta DECOR

The basic qualities of this product range include durable construction, attractively priced high quality veneer with improved
abrasion resistance and resistance to humidity. A wide range of new and attractive color veneers provides a more attractive
collection. Porta DECOR doors perfectly fit both the residential and office spaces.
full
12
small light
large light
small sash
medium sash
narrow light
DOOR LEAF CONSTRUCTION
Portadecor veneer
The door leaf consists of a finger jointed softwood filled with stabilizing honeycomb core
or perforated chipboard reinforced with inner frame made of plywood (option at an extra
charge) and covered from both sides with HDF boards.

LEAF EDGE PROFILE
Grey
Euroinvest
Oak*
Cherry tree
Walnut
“K” profile leaf edge. Both side edges and the upper edge of the leaf covered with
leaf-colored skirting tape.
Wenge
NEW
COLORS
Light Oak
Walnut
Verona1
Walnut
Verona2
Walnut
Verona3
White
MODELS
* till stock-out
samples of colors
FINISHING
The door leaf is veneered with Portadecor veneer. MDF frame is veneered in the colour of
the door leaf. Narrow light and sash frames (made of PVC) veneered in the colour of the
door leaf.
Single-or double-leaf in all patterns.
Door leaf is available in version for sliding door without hinges and rebate and with
a groove for guiding element slot-milled in the bottom edge of the door leaf (included in
the system).
see pages 156-158
ACCESSORIES – INCLUDED IN THE LEAF PRICE
DOOR LEAVES – CROSS-SECTIONS
•
•
•
•
•
Two standard pintle hinges*
Three hinges for a leaf of dimension „100” and „110”
Lock: for regular key, bathroom lock or for cylinder insert
Pane (pattern ”chinchilla“)
Round flush handle (for sliding doors)
LEAF SIZES (PAGE 150, TABLE 1)
„honeycomb” stabilizing
perforated chipboard
Single leaf*: „60“, „70“, „80“, „90“, „100“, „110”1
Double leaf*: „90“ ÷ „200“2
RECOMMENDED DOOR FRAMES (FROM PAGE 124)
PROFILE OF GLAZING FRAME
•
•
•
•
MINIMAX door frame, fixed width: 60 mm and 100 mm
Adjustable Porta SYSTEM door frame
Adjustable PRESTIGE door frame
Metal door frame
NOTES
patterns: small light,
large light
patterns: small sash,
medium sash,
narrow light
• Preparation for shortening, for an additional charge, applies only to honeycomb core leaves.
The perforated chipboard and solid chipboard core leaves come with preparation for shortening
as standard.
* Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
1 Available only with the perforated chipboard core. Pane’s dimensions are the same as for
„100” size.
2 Arbitrary selection of door leaf sizes for double doors. Passive leaf (side panels) with sizes „30”,
„40”, „50” only in full option.
ADDITIONAL CHARGES (OPTION)
„100”, „110” size
core: perforated chipboard
ventilation: grid, sleeves or undercut
third hinge for the leaf dimensions „60”, „70”, „80” or „90”
preparation for shortening up to 60 mm
bull’s eye made from stainless steel
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
hinge covers (set on one pc)
handle with escutcheon (page 144)
mat hardened pane – small light
mat hardened pane – large light
mat hardened pane – small sash
mat hardened pane – medium sash
mat hardened pane – narrow light
13
Porta TWIST

Simple form and sharp outlines of the offered Porta TWIST doors have been softened by arches and curvatures which may be
adjusted to the living space character. This is a series of products addressed to the customers who desire to emphasize the door
and make it a distinctive feature as one of prevailing elements of the interior decoration.
pattern A.0
14
pattern A.1
pattern A.3
pattern B.0
pattern B.1
pattern B.2
NEW COLLECTION
pattern C.0
DOOR LEAF CONSTRUCTION
Portadecor veneer
Grey
Euroinvest
The door leaf is composed of combination of honeycomb core and stabilizing board or
solid chipboard (option at an extra charge). The frame and the core are covered with HDF
board on both sides. Door leaves are also equipped by either a pane or flat panel (4 mm
thick HDF board veneered from both sides).

Beech
Bavaria
Oak*
Cherry tree
Walnut
Wenge
NEW
COLORS
Light Oak
Walnut
Verona1
* till stock-out
samples of colors
Walnut
Verona2
Walnut
Verona3
White
LEAF EDGE PROFILE
“K” profile leaf edge. Both side edges and the upper edge of the leaf covered with
leaf-colored skirting tape.
FINISHING
The leaf is covered with Portadecor veneer. PVC frame is in the colour of the door leaf.
MODELS
Single and double leaf: in all patterns.
Door leaf is available in version for sliding door without hinges and rebate and with
a groove for guiding element slot-milled in the bottom edge of the door leaf (included in
the system).
see pages 156-158
ACCESSORIES – INCLUDED IN THE LEAF PRICE
•
•
•
•
•
DOOR LEAVES – CROSS-SECTIONS
Two pintle hinges standard*
Three pintle hinges for a leaf of dimension „100” and „110”
Lock: for regular key, bathroom lock or for cylinder insert
Pane (pattern: mat)
Round flush handle (for sliding doors)
LEAF SIZES (PAGE 150, TABLE 1)
„honeycomb” stabilizing
solid chipboard reinforced by plywood
Single leaf*: „60“1, „70“, „80“, „90“, „100“, „110”2
Double leaf*: „120“1 ÷ „200“3
RECOMMENDED DOOR FRAMES (FROM PAGE 124)
•
•
•
•
PROFILE OF GLAZING FRAME
MINIMAX door frame, fixed width: 60 mm and 100 mm
Adjustable Porta SYSTEM door frame
Adjustable PRESTIGE door frame
Metal door frame
NOTES:
•
*
Preparation for shortening, for an additional charge, applies only to honeycomb core leaves.
The solid chipboard reinforced by plywood comes with preparation for shortening as standard.
Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
all patterns
1 Not available in pattern A and D
2 Available only with solid chipboard core reinforced by plywood.
3 Arbitrary selection of door leaf sizes for double doors.
ADDITIONAL CHARGES (OPTION)
„100”, „110” size
core: solid chipboard
ventilation: grid, sleeves or undercut
third hinge for the leaf dimensions „60“, „70“, „80“ or „90“
preparation for shortening up to 60 mm
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
hinge covers (set on one pc)
handle with escutcheon (page 144)
pattern C.1
pattern D.0
pattern D.1
15
Porta GRANDDECO

Porta GRANDDECO is a classic design and a guarantee of an elegant interior. A simple form is a synonym for good taste.
The models are addressed to the Customers who value tradition and who feel excellent in classically designed interiors.
pattern 1.1
16
pattern 1.2
pattern 1.3
pattern 2.1
pattern 2.2
pattern 2.3
pattern 3.1
DOOR LEAF CONSTRUCTION
Portadecor veneer
The leaf core is made of honeycomb chipboard. Optionally, perforated chipboard (models
1.1, 2.1, 3.1, 4.1) or solid chipboard (other models) reinforced of inner frame made of
plywood. The frame and the core are covered with HDF board on both sides.

LEAF EDGE PROFILE
Grey
Euroinvest
Beech
Bavaria
Oak*
Cherry tree
Walnut
Wenge
NEW
COLORS
Light Oak
Walnut
Verona1
Walnut
Verona2
Walnut
Verona3
White
FINISHING
The door leaf is veneered with Portadecor veneer. MDF frame is veneered in the colour of
the door leaf.
MODELS
* till stock-out
samples of colors
“K” profile leaf edge. Both side edges and the upper edge of the leaf covered with
leaf-colored skirting tape.
Single-or double-leaf in all patterns.
Door leaf is available in version for sliding door without hinges and rebate and with
a groove for guiding element slot-milled in the bottom edge of the door leaf (included in
the system).
see pages 156-158
ACCESSORIES – INCLUDED IN THE LEAF PRICE
•
•
•
•
•
DOOR LEAVES – CROSS-SECTIONS
Two standard pintle hinges*
Three hinges for a leaf of dimension „100” and „110”
Lock: for regular key, bathroom lock or for cylinder insert
Pane (pattern ”chinchilla” or hardened mat)
Round flush handle (for sliding doors)
LEAF SIZES (PAGE 150, TABLE 1)
solid chipboard reinforced by plywood
„honeycomb” stabilizing
Single leaf*: „60“, „70“, „80“, „90“, „100“, „110” 1
Double leaf*: „120“ ÷ „200“2
RECOMMENDED DOOR FRAMES (FROM PAGE 124)
•
•
•
•
MINIMAX door frame, fixed width: 60 mm and 100 mm
Adjustable Porta SYSTEM door frame
Adjustable PRESTIGE door frame
Metal door frame
perforated chipboard
NOTES:.
•
*
PROFILE OF GLAZING FRAME
Preparation for shortening, for an additional charge, applies only to honeycomb core leaves.
The perforated chipboard and solid chipboard core leaves come with preparation for shortening
as standard.
Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
• 1
Available only with the perforated chipboard core. Pane’s dimensions are the same as for
„100” size.
• 2
Arbitrary selection of door leaf sizes for double doors.
all glazed models
all solid models
ADDITIONAL CHARGES (OPTION)
„100”, „110” size
core: perforated or solid chipboard
ventilation: grid, sleeves or undercut
third hinge for the leaf dimensions „60”, „70”, „80” or „90”
preparation for shortening up to 60 mm
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
hinge covers (set on one pc)
pattern 3.2
pattern 4.1
pattern 4.2
handle with escutcheon (page 144)
17
Porta GRANDDECO

Porta GRANDDECO is a classic design and a guarantee of an elegant interior. A simple form is a synonym for good taste.
The models are addressed to the Customers who attach an importance to the tradition and who feel excellent in classically
designed interiors.
pattern 5.1
18
pattern 5.2
pattern 6.1
pattern 6.2
DOOR LEAF CONSTRUCTION
Portadecor veneer
The leaf core is made of honeycomb chipboard. Optionally, perforated chipboard (models
5.1, 6.1) or solid chipboard (other models) reinforced of inner frame made of plywood. The
frame and the core are covered with HDF board on both sides.

LEAF EDGE PROFILE
Grey
Euroinvest
Beech
Bavaria
Oak*
Cherry tree
Walnut
Wenge
NEW
COLORS
Light Oak
Walnut
Verona1
Walnut
Verona2
Walnut
Verona3
White
FINISHING
The door leaf is veneered with Portadecor veneer. MDF frame is veneered in the colour of
the door leaf.
MODELS
* till stock-out
samples of colors
“K” profile leaf edge. Both side edges and the upper edge of the leaf covered with
leaf-colored skirting tape.
Single-or double-leaf in all patterns.
Door leaf is available in version for sliding door without hinges and rebate and with
a groove for guiding element slot-milled in the bottom edge of the door leaf (included in
the system).
see pages 156-158
ACCESSORIES – INCLUDED IN THE LEAF PRICE
•
•
•
•
•
DOOR LEAVES – CROSS-SECTIONS
Two standard pintle hinges*
Three hinges for a leaf of dimension „100” and „110”
Lock: for regular key, bathroom lock or for cylinder insert
Pane (pattern ”chinchilla” or hardened mat)
Round flush handle (for sliding doors)
LEAF SIZES (PAGE 150, TABLE 1)
solid chipboard reinforced by plywood
„honeycomb” stabilizing
Single leaf*: „60“, „70“, „80“, „90“, „100“, „110”1
Double leaf*: „120“ ÷ „200“2
RECOMMENDED DOOR FRAMES (FROM PAGE 124)
•
•
•
•
MINIMAX door frame, fixed width: 60 mm and 100 mm
Adjustable Porta SYSTEM door frame
Adjustable PRESTIGE door frame
Metal door frame
perforated chipboard
NOTES:
• Preparation for shortening, for an additional charge, applies only to honeycomb core leaves.
The perforated chipboard and solid chipboard core leaves come with preparation for shortening
as standard.
* Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
PROFILE OF GLAZING FRAME
1 Available only with the perforated chipboard core. Pane’s dimensions are the same as for „100”
size.
2 Arbitrary selection of door leaf sizes for double doors.
all glazed models
all solid models
ADDITIONAL CHARGES (OPTION)
„100”, „110” size
core: perforated or solid chipboard
ventilation: grid, sleeves or undercut
third hinge for the leaf dimensions „60”, „70”, „80” or „90”
preparation for shortening up to 60 mm
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
hinge covers (set on one pc)
handle with escutcheon (page 144)
19
Porta STYLE

The distinctive features of this range include many decorative qualities while preserving individual approach to the interior.
The design, which meets high requirements of the Customers, allows the creation of an interesting decor effect.
NEW COLORS
* The same prices apply to door leaves with panels (thickness 8 mm, veneered on both sides).
pattern 1
20
pattern 2
pattern 3
pattern 4
pattern 5
DOOR LEAF CONSTRUCTION
Portadecor veneer
Grey
Euroinvest
In models (1, 2, 3 and 4) the leaf core is made of stabilizing honeycomb core or perforated
chipboard reinforced with inner frame made of plywood (option at an extra charge). In
model 5, the leaf core is made of solid chipboard. The frame and the core are covered with
HDF board on both sides.

Beech
Bavaria
Oak*
Cherry tree
Walnut
Wenge
NEW
COLORS
Light Oak
Walnut
Verona1
Walnut
Verona2
Walnut
Verona3
White
* till stock-out
HQ CPL veneer
White
Beech Porta
FINISHING
The door leaf is veneered with Portadecor veneer or HQ CPL veneer. MDF frame is veneered
in the colour of the door leaf.
MODELS

Grey
Euroinvest
LEAF EDGE PROFILE
“K” profile leaf edge. Both side edges and the upper edge of the leaf covered with
leaf-colored skirting tape.
Mahogany
Walnut
Glazed leaves.
Leaves with panel (with 8 mm thick panel veneered from both sides).
Door leaf is available in version for sliding door without hinges and rebate and with
a groove for guiding element slot-milled in the bottom edge of the door leaf (included in
the system).
ACCESSORIES – INCLUDED IN THE LEAF PRICE
Oak
Milano 1
Oak
Milano 2
Oak
Milano 3
Oak
Milano 4
Oak
Milano 5
NEW
COLORS
White
Walnut
samples of colors
Walnut
Modena 1
•
•
•
•
•
Two standard pintle hinges*
Three hinges for a leaf of dimension „100” and „110”
Lock: for regular key, bathroom lock or for cylinder insert
Pane (pattern ”chinchilla” or hardened mat)
Round flush handle (for sliding doors)
LEAF SIZES (PAGE 150, TABLE 1)
Walnut
Modena 1
Single leaf*: „60“, „70“, „80“, „90“, „100“, „110”1
Double leaf*: „120“ ÷ „200“2
see pages 156-158
RECOMMENDED DOOR FRAMES (FROM PAGE 124)
DOOR LEAVES – CROSS-SECTIONS
•
•
•
•
MINIMAX door frame, fixed width: 60 mm and 100 mm
Adjustable Porta SYSTEM door frame
Adjustable PRESTIGE door frame (tylko z okleiną Portadecor)
Metal door frame
NOTES
„honeycomb” stabilizing
solid chipboard reinforced by plywood
perforated chipboard
• Sizes „100” and „110” are not available for model 5.
• Two sleeve rows are not available for model 5.
• Preparation for shortening, for an additional charge, applies only to honeycomb core leaves.
The perforated chipboard and solid chipboard core leaves come with preparation for shortening
as standard.
* Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
1 Available only with the perforated chipboard core. Pane’s dimensions are the same as for „100”
size.
2 Arbitrary selection of door leaf sizes for double doors.
PROFILE OF GLAZING FRAME
all models
in Portadecor veneer
all models
in CPL HQ veneer
ADDITIONAL CHARGES (OPTION)
100”, „110” size
core: perforated chipboard
ventilation: grid, sleeves or undercut
third hinge for the leaf dimensions „60”, „70”, „80” or „90”
preparation for shortening up to 60 mm
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
hinge covers (set on one pc)
handle with escutcheon (page 144)
21
Porta FOCUS

Glazed models are designed for people who value and appreciate the freedom of space, for whom natural light plays an important
role in planning the interior. Porta FOCUS are directed for those who wish to make their homes standing out through modern and
exceptionally attractive style of interior design.
pattern 1.B
22
pattern 1.C
pattern 1.D
pattern 2.A
pattern 2.B
pattern 2.C
NEW MODELS
pattern 2.D
DOOR LEAF CONSTRUCTION
Portadecor veneer
Grey
Euroinvest
The door leaf is filled with stabilizing honeycomb core or perforated chipboard reinforced
with inner frame made of plywood (option at an extra charge). Frame with filing is covered
from both sides with HDF board. In glazed models is used hardened mat pane with
a thickness 8 mm, which is an element of door construction.

Beech
Bavaria
Oak*
Cherry tree
Walnut
Wenge
NEW
COLORS
Light Oak
Walnut
Verona1
Walnut
Verona2
Walnut
Verona3
White
* till stock-out
samples of colors
see pages 156-158
LEAF EDGE PROFILE
“K” profile leaf edge. Both side edges and the upper edge of the leaf covered with
leaf-colored skirting tape. Also part of the pane edge is covered with leaf-colored skirting
tape – concerns patterns from 3 group.
FINISHING
The door leaf is veneered with Portadecor veneer. MDF frame is veneered in the colour of
the door leaf for patterns from 1 and 2 group. MDF trim is veneered in the colour of the door
leaf for patterns from 3 group.
MODELS
Single-or double-leaf in all patterns.
Single-leaf sliding door are made without hinges and rebate. The lower part of the frame
has a grove for the floor-mounted guide (included in the system). Door leaves from group 2
have an additional c-section metal rail on the leaf for guiding.
DOOR LEAVES – CROSS-SECTIONS
ACCESSORIES – INCLUDED IN THE LEAF PRICE
„honeycomb” stabilizing
perforated chipboard
•
•
•
•
•
Two standard pintle hinges*
Three hinges for a leaf of dimension „100” and „110”
Lock: for regular key, bathroom lock or for cylinder insert
Hardened mat pane (width, not dependent on leaf size)
Round flush handle (for sliding doors)
LEAF SIZES (PAGE 150, TABLE 1)
Single leaf*: „60“, „70“, „80“, „90“, „100“, „110” 1
Double leaf*: „120“ ÷ „200“ 2
DOSTUPNÉ DVEŘNÍ VÝPLNĚ
RECOMMENDED DOOR FRAMES (FROM PAGE 124)
•
•
•
•
all glazed models
from group 2
MINIMAX door frame, fixed width: 60 mm and 100 mm
Adjustable Porta SYSTEM door frame
Adjustable PRESTIGE door frame
Metal door frame
NOTES
• Ventilation undercut and grid are available only in full door leaves from group 1.
• Preparation for shortening, for an additional charge, applies only to honeycomb core leaves from
group 1. The perforated chipboard and solid chipboard core leaves come with preparation for
shortening as standard.
• Ventilation sleeves:
– constant quantity for patterns from 1 and 2 group (4 pcs)
– quantity depends on the dimension of leaf (for patterns from 3 group)
* Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
1 Available only with the perforated chipboard core.
2 Arbitrary selection of door leaf sizes for double doors.
Slot-milled in pattern 1.E
Pane in pattern 2.E
ADDITIONAL CHARGES (OPTION)
„100”, „110” size
core: perforated chipboard
ventilation: grid, sleeves or undercut
third hinge for the leaf dimensions „60”, „70”, „80” or „90”
preparation for shortening up to 60 mm
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
hinge covers (set on one pc)
handle with escutcheon (page 144)
pattern 3.A
pattern 3.B
pattern 3.C
23
Porta FIT

Porta FIT is a „tailor made”, wide range of products adjusted to individual requirements of each and every customer. The collection
was prepared in 29 colors and in 3 different qualities of finishing ranging from the economical and priceattractive version in
Portadecor veneer, through an effective veneer Portadur of high utility, up to extremely resistant and giving a guarantee of multiuse CPL HQ veneer. CPL HQ laminate is a material from Long Life Product category used in the apartments of a higher standard and
wherever the doors are exposed to intensive use, such as hotels, office buildings and other public utility spaces.
pattern A.2
24
pattern A.6
pattern B.2
pattern B.5
pattern C.1
NEW COLORS
pattern C.3
DOOR LEAF CONSTRUCTION
Portadecor veneer
Grey
Euroinvest
In patterns A, B, C and I the door leaf is filled with combination of honeycomb core and
stabilizing board or fully with solid chipboard (option at an extra charge). In pattern D the
standard door leaf filling is solid chipboard. The frame and the core are covered with HDF
board on both sides. Door leaves are also equipped by either a pane or flat panel (8 mm
thick HDF board veneered from both sides).

Beech
Bavaria
Oak*
Cherry tree
Walnut
Wenge
NEW
COLORS
Light Oak
Walnut
Verona1
Walnut
Verona2
Walnut
Verona3
White
Walnut 5
Walnut 6
FINISHING
The leaf is covered with Portadecor, Protadur veneer (vertical wood grains) or CPL HQ
(Continuous Pressure Laminate High Quality) 0,2 mm laminate. MDF frame is available in
two profiles depending on veneer type (different for CPL HQ) and is veneered in the colour
of the door leaf.
* till stock-out
Portadur veneer
Walnut 2

Walnut 3
HQ CPL veneer
Walnut 4

White
Grey
Euroinvest
Beech Porta
Mahogany
Walnut
Oak
Milano 1
Oak
Milano 2
Oak
Milano 3
Oak
Milano 4
Oak
Milano 5
NEW
COLORS
White
Walnut
Walnut
Modena 1
samples of colors
LEAF EDGE PROFILE
“K” profile leaf edge. Both side edges and the upper edge of the leaf covered with leafcolored skirting tape. For doors veneered with CPL HQ both side edges and the upper edge
of the leaf covered with 1 mm thick ABS tape of the same colour as the door.
MODELS
Single and double leaf: in all patterns.
Door leaf is available in version for sliding door without hinges and rebate and with
a groove for guiding element slot-milled in the bottom edge of the door leaf (included in
the system).
ACCESSORIES – INCLUDED IN THE LEAF PRICE
•
•
•
•
•
Two pintle hinges standard*
Three pintle hinges standard for a leaf of dimension „100” and in Portadur veneer
Lock: for regular key, bathroom lock or for cylinder insert
Pane (pattern hardened1 mat; „chinchilla”; MasterCarre)
Round flush handle (for sliding doors)
LEAF SIZES (PAGE 150, TABLE 1)
Single leaf*: „60“, „70“, „80“, „90“, „100“
Double leaf*: „120“ ÷ „200“2
Walnut
Modena 1
RECOMMENDED DOOR FRAMES (FROM PAGE 124)
•
•
•
•
see pages 156-158
DOOR LEAVES – CROSS-SECTIONS
MINIMAX door frame, fixed width: 60 mm (only Portadecor veneer) and 100 mm
Adjustable Porta SYSTEM door frame
Adjustable PRESTIGE door frame (only Portadecor and Portadur veneer)
Metal door frame
NOTES
*
„honeycomb” stabilizing
Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
solid chipboard reinforced by plywood
1 Because of small size, the pane in pattern A is not hardened.
2 Arbitrary selection of door leaf sizes for double doors.
PROFILE OF GLAZING FRAME
all models
in CPL HQ veneer
all models in Portadecor
and Portadur veneer
ADDITIONAL CHARGES (OPTION)
„100” size
core: solid chipboard
ventilation: grid, sleeves or undercut
third hinge for the leaf dimensions „60”, „70”, „80” or „90”
preparation for shortening up to 60 mm
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
hinge covers (set on one pc)
handle with escutcheon (page 144)
pattern D.1
pattern D.3
pattern I.1
25
Porta FIT

Porta FIT is a „tailor made”, wide range of products adjusted to individual requirements of each and every customer.
The collection was prepared in 29 colors and in 3 different qualities of finishing ranging from the economical and priceattractive
version in Portadecor veneer, through an effective veneer Portadur of high utility, up to extremely resistant and giving a guarantee
of multi-use CPL HQ veneer. CPL HQ laminate is a material from Long Life Product category used in the apartments of a higher
standard and wherever the doors are exposed to intensive use, such as hotels, office buildings and other public utility spaces.
pattern E.0
26
pattern E.3
pattern F.2
pattern F.6
pattern G.2
NEW COLORS
pattern G.5
DOOR LEAF CONSTRUCTION
Portadecor veneer
Grey
Euroinvest
The door leaf is filled with combination of honeycomb core and stabilizing board or fully
with solid chipboard (option at an extra charge). The frame and the core are covered with
HDF board on both sides. Door leaves are also equipped by either a pane or flat panel
(8 mm thick HDF board veneered from both sides).

Beech
Bavaria
Oak*
Cherry tree
Walnut
Wenge
NEW
COLORS
Light Oak
Walnut
Verona1
* till stock-out
Portadur veneer
Walnut
Verona2
Walnut
Verona3
White
Walnut 5
Walnut 6

LEAF EDGE PROFILE
“K” profile leaf edge. Both side edges and the upper edge of the leaf covered with
leaf-colored skirting tape. For doors veneered with CPL HQ both side edges and the upper
edge of the leaf covered with 1 mm thick ABS tape of the same colour as the door.
FINISHING
The leaf is covered with Portadecor, Protadur veneer (vertical-horizontal wood grains) or
CPL HQ 0,2 mm laminate (Continuous Pressure Laminate High Quality).
MDF frame is available in two shapes of profile depending on veneer (different for CPL HQ)
and is veneered in the colour of the door leaf.
MODELS
Walnut 2
Walnut 3
HQ CPL veneer
Walnut 4

Single and double doors: in all patterns.
Door leaf is available in version for sliding door without hinges and rebate and with
a groove for guiding element slot-milled in the bottom edge of the door leaf (included in
the system).
ACCESSORIES – INCLUDED IN THE LEAF PRICE
White
Grey
Euroinvest
Beech Porta
Mahogany
Walnut
Oak
Milano 1
Oak
Milano 2
Oak
Milano 3
Oak
Milano 4
Oak
Milano 5
NEW
COLORS
White
Walnut
Walnut
Modena 1
samples of colors
Walnut
Modena 1
•
•
•
•
•
Two pintle hinges standard*
Three pintle hinges standard for a leaf of dimension „100” and in Portadur veneer
Lock: for regular key, bathroom lock or for cylinder insert
Pane (pattern hardened mat; „chinchilla”; MasterCarre)
Round flush handle (for sliding doors)
LEAF SIZES (PAGE 150, TABLE 1)
Single leaf*: „60“, „70“, „80“, „90“, „100“1
Double leaf*: „120“ ÷ „200“2
RECOMMENDED DOOR FRAMES (FROM PAGE 124)
•
•
•
•
see pages 156-158
MINIMAX door frame, fixed width: 60 mm (only Portadecor veneer) and 100 mm
Adjustable Porta SYSTEM door frame
Adjustable PRESTIGE door frame (only Portadecor and Portadur veneer)
Metal door frame
DOOR LEAVES – CROSS-SECTIONS
NOTES
• Ventilation grid and sleeves with 2 rows not available in H pattern.
* Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
„honeycomb” stabilizing
solid chipboard reinforced by plywood
1 „100” size is available only with vertical wood grains.
2 Arbitrary selection of door leaf sizes for double doors.
PROFILE OF GLAZING FRAME
all models
in CPL HQ veneer
all models in Portadecor
and Portadur veneer
ADDITIONAL CHARGES (OPTION)
„100” size
core: solid chipboard
ventilation: grid, sleeves or undercut
third hinge for the leaf dimensions „60”, „70”, „80” or „90”
preparation for shortening up to 60 mm
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
hinge covers (set on one pc)
handle with escutcheon (page 144)
pattern H.1
pattern H.4
27
Porta NOVA

High quality materials, attractive and popular design, and various types of glazings are the main advantages of this proposal.
Porta NOVA is a combination of durability and the charm of italian walnut wood. Models included in this range are used both
in the residential and office spaces, and the veneer with wood grain pattern improves the aesthetics of any area.
pattern 1.1
28
pattern 1.2
pattern 1.3
pattern 2.1
pattern 2.2
pattern 3.1
DOOR LEAF CONSTRUCTION
Portadur veneer
The door leaf consists of a finger jointed softwood filled with: for group 1 – stabilizing
honeycomb core or perforated chipboard reinforced with inner frame made of plywood
(option at an extra charge); for group 2 and 3 – solid chipboard.
Frame with filling is covered from both sides with HDF board.

LEAF EDGE PROFILE
Walnut 2
Walnut 3
samples of colors
Walnut 4
Walnut 5
Walnut 6
see pages 156-158
“K” type door leaf edge profile. Both sides and the top of a door leaf are veneered with
skirting tape in the colour of the door leaf.
FINISHING
The door leaf is veneered with Portadur veneer with characteristic verticalhorizontal wood
grains. The light frame is veneered.
DOOR LEAVES – CROSS-SECTIONS
MODELS
Single and double doors: in all patterns of each group. Full, glazed or ready for glazing.
Door leaf is available in version for sliding door without hinges and rebate and with
a groove for guiding element slot-milled in the bottom edge of the door leaf (included in
the system).
ACCESSORIES – INCLUDED IN THE LEAF PRICE
„honeycomb” stabilizing
solid chipboard reinforced by plywood
•
•
•
•
•
Lock: for regular key, bathroom lock or for cylinder insert
Three standard pintle hinges*
Pane (pattern ”chinchilla“; ”ribbed glass“1; ”mat hardened“; MasterCarre)
Preparation for shortening up to 60 mm (2 and 3 group only)
Round flush handle (for sliding doors)
LEAF SIZES (PAGE 150, TABLE 1)
perforated chipboard
Single leaf*: „60”, „70“, „80“, „90”, „100” 2
Double leaf*: „90“ ÷ „200“3
RECOMMENDED DOOR FRAMES – TRIPLE-HINGED (FROM PAGE 124)
• MINIMAX door frame, fixed width: 100 mm
• Adjustable Porta SYSTEM door frame
• Adjustable PRESTIGE door frame
NOTES
PROFILE OF GLAZING FRAME
all glazed models or
models with HDF board
• Grid, ventilation sleeves – 2 rows available in patterns from group 1 only.
• Preparation for shortening, for an additional charge, applies only to honeycomb core leaves.
The perforated chipboard and solid chipboard come with preparation for shortening as standard.
* Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
1 Not available for pattern 2.2
2 Size „100“ available only with vertical wood grains in group 1 and 3.
3 Arbitrary selection of door leaf sizes for double doors. Passive leaf (side panels) with sizes „30”,
„40”, „50” only in full option and vertical wood grains.
ADDITIONAL CHARGES (OPTION)
„100” size
core: perforated chipboard
ventilation: grid, sleeves or undercut
preparation for shortening up to 60 mm (group 1)
bull’s eye made from stainless steel (pattern 1.1 only)
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
hinge covers (set on one pc)
handle with escutcheon (page 144)
pattern 3.2
29
Porta NOVA

High quality materials, attractive and popular design, and various types of glazings are the main advantages of this proposal.
Porta NOVA is a combination of durability and the charm of italian walnut wood. Models included in this range are used both
in the residential and office spaces, and the veneer with wood grain pattern improves the aesthetics of any area.
pattern 4.1
30
pattern 4.2
pattern 4.3
pattern 4.4
pattern 5.1
pattern 5.2
DOOR LEAF CONSTRUCTION
Portadur veneer
Walnut 2
The door leaf consists of a finger-jointed softwood or MDF frame covered from both sides
with HDF boards, filled with solid chipboard.

Walnut 3
LEAF EDGE PROFILE
Walnut 4
Walnut 5
Walnut 6
“K” type door leaf edge profile. Both sides and the top of a door leaf are veneered with
skirting tape in the colour of the door leaf.
FINISHING
samples of colors
The door leaf is veneered with Portadur veneer with characteristic vertical–horizontal
wood grains. The light frame is veneered.
see pages 156-158
MODELS
Single and double doors: in all patterns of each group. Full, glazed or ready for glazing.
Door leaf is available in version for sliding door without hinges and rebate and with
a groove for guiding element slot-milled in the bottom edge of the door leaf (included in
the system).
DOOR LEAVES – CROSS-SECTIONS
ACCESSORIES – INCLUDED IN THE LEAF PRICE
•
•
•
•
•
solid chipboard reinforced by plywood
Lock: for regular key, bathroom lock or for cylinder insert
Three standard pintle hinges*
Pane (pattern ”chinchilla“; ”ribbed glass“; ”mat hardened“; MasterCarre)
Preparation for shortening up to 60 mm
Round flush handle (for sliding doors)
LEAF SIZES (PAGE 150, TABLE 1)
Single leaf*: „60”, „70“, „80“, „90“, „100”1
Double leaf*: „120“ ÷ „200“2
RECOMMENDED DOOR FRAMES – TRIPLE-HINGED (FROM PAGE 124)
• MINIMAX door frame, fixed width: 100 mm
• Adjustable Porta SYSTEM door frame
• Adjustable PRESTIGE door frame
NOTES
*
Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
PROFILE OF GLAZING FRAME
1 Size „100“ available only with vertical wood grains.
2 Arbitrary selection of door leaf sizes for double doors.
all glazed models or
models with HDF board
ADDITIONAL CHARGES (OPTION)
„100” size
ventilation undercut or ventilation sleeves (1 row)
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
hinge covers (set on one pc)
handle with escutcheon (page 144)
pattern 5.3
pattern 5.4
pattern 5.5
31
Porta NOVA

High quality materials, attractive and popular design, and various types of glazings are the main advantages of this proposal.
Porta NOVA is a combination of durability and the charm of italian walnut wood. Models included in this range are used both in
the residential and office spaces, and the veneer with wood grain pattern improves the aesthetics of any area.
Design inspired by the application of Module RETRO - details, see page 126.
pattern 6.1
32
pattern 6.2
pattern 6.3
pattern 6.4
pattern 6.5
pattern 7.1
pattern 7.2
DOOR LEAF CONSTRUCTION
Portadur veneer
The door leaf consists of a finger-jointed softwood or MDF frame covered from both sides
with HDF boards, filled with solid chipboard.

LEAF EDGE PROFILE
Walnut 2
Walnut 3
samples of colors
Walnut 4
Walnut 5
Walnut 6
“K” type door leaf edge profile. Both sides and the top of a door leaf are veneered with
skirting tape in the colour of the door leaf.
FINISHING
see pages 156-158
The door leaf is veneered with Portadur veneer with characteristic verticalhorizontal wood
grains. The light frame and sash (from PVC) are veneered in the colour of the door leaf.
MODELS
Single and double doors: in all patterns of each group. Full, glazed or ready for glazing.
Door leaf is available in version for sliding door without hinges and rebate and with
a groove for guiding element slot-milled in the bottom edge of the door leaf (included in
the system).
DOOR LEAVES – CROSS-SECTIONS
ACCESSORIES – INCLUDED IN THE LEAF PRICE
•
•
•
•
•
solid chipboard reinforced by plywood
Lock: for regular key, bathroom lock or for cylinder insert
Three standard pintle hinges*
Pane pattern (”chinchilla“;”mat hardened“)
Preparation for shortening up to 60 mm
Round flush handle (for sliding doors)
LEAF SIZES (PAGE 150, TABLE 1)
Single leaf*: „60”, „70“, „80“, „90“, „100”1
Double leaf*: „120“ ÷ „200“ 2
RECOMMENDED DOOR FRAMES – TRIPLE-HINGED (FROM PAGE 124)
• MINIMAX door frame, fixed width: 100 mm
• Adjustable Porta SYSTEM door frame
• Adjustable PRESTIGE door frame
NOTES
• Grid and ventilation sleeves – 2 rows available in patterns 6.5, 7.5 only.
* Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
PROFILE OF GLAZING FRAME
1 Size „100” is available only with vertical wood grains.
2 Arbitrary selection of door leaf sizes for double doors.
all glazed models or
models with HDF board
ADDITIONAL CHARGES (OPTION)
„100” size
ventilation: grid, sleeves or undercut
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
hinge covers (set on one pc)
handle with escutcheon (page 144)
pattern 7.3
pattern 7.4
pattern 7.5
33
Porta LINE

Unique character of the Porta LINE doors is underlined by aluminum marquetry on the leaf’s surface. Models from this collection
are available in a wide range of colors, with exceptionally durable HQ CPL (High Quality Continuous Pressure Laminate) and
Portadur veneers, which makes the product suitable for use not only in residential applications, but also in offices and hotels.
pattern A.1
34
pattern A.3
pattern B.1
pattern C.1
pattern D.1
pattern E.1
NEW COLORS
DOOR LEAF CONSTRUCTION
HQ CPL veneer
White
Oak
Milano 1
The door leaf consists of a finger jointed softwood filled with stabilizing honeycomb core
or perforated chipboard reinforced with inner frame made of plywood. The frame and the
core are covered, on both sides, with an HDF board. The leaves come equipped with 6 mm
thick aluminum marquetry (silver or golden).

Grey
Euroinvest
Beech Porta
Oak
Milano 2
Oak
Milano 3
Mahogany
Walnut
Oak
Milano 4
Oak
Milano 5
NEW
COLORS
White
Walnut
Walnut
Modena 1
Portadur veneer
LEAF EDGE PROFILE
“K” profile leaf edge. Both side edges and the upper edge of the leaf covered with
leaf-colored skirting tape.
FINISHING
The leaf is covered with 0.2 mm HQ CPL veneer (Continuous Pressure Laminate High
Quality) with a vertical vein pattern, or with a Portadur veneer with a vertical or a vertical
and horizontal vein pattern (pattern A.3).
MODELS
Walnut
Modena 1
Single-or double-leaf in all patterns.
Door leaf is available in version for sliding door without hinges and rebate and with
a groove for guiding element slot-milled in the bottom edge of the door leaf (included in
the system).

ACCESSORIES – INCLUDED IN THE LEAF PRICE
Walnut 2
samples of colors
Walnut 3
Walnut 4
Walnut 5
Walnut 6
see pages 156-158
•
•
•
•
Two standard pintle hinges*
Three hinges in the „100” width leaf and in all door sizes in Portadur veneer
Lock: for a regular key, with a bathroom lock or for cylinder insert
Round flush handle (for sliding doors)
LEAF SIZES (PAGE 150, TABLE 1)
Single leaf*: „60“, „70“, „80“, „90“, „100“, „110“1
Double leaf*: „120“ ÷ „200“2
DOOR LEAVES – CROSS-SECTIONS
RECOMMENDED DOOR FRAMES (FROM PAGE 124)
•
•
•
•
„honeycomb” stabilizing
MINIMAX door frame, fixed width: 100 mm
Adjustable Porta SYSTEM door frame
Adjustable PRESTIGE door frame (only in Portadur veneer)
Metal door frame
perforated chipboard
NOTES
• Ventilation sleeves not available in pattern D.1.
• Preparation for shortening, for an additional charge, applies only to honeycomb core leaves.
The perforated chipboard core and solid chipboard come with preparation for shortening as
standard.
* Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
1 Available only with the perforated chipboard core. Model A.3 impossible to comply with the size
of „100” and „110”.
2 Arbitrary selection of door leaf sizes for double doors.
aluminum marquetry – silver color
ADDITIONAL CHARGES (OPTION)
„100”, „110” size
core: perforated chipboard
ventilation sleeves or ventilation undercut
third hinge for the leaf dimensions „60”, „70”, „80” or „90”
preparation for shortening up to 60 mm
bull’s eye made from stainless steel (not available in pattern E.1)
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
hinge covers (set on one pc)
aluminum marquetry – golden color
handle with escutcheon (page 144)
35
HQ CPL laminated

This product is applied for all types of interiors, especially in places where the doors are subject to heavy traffic with suggested
usage in hotels, offices, public buildings, and - last but not least - high standard apartments. Used ABS tape provides maximum
resistance for mechanical door leaf damage. The door leaf and frame are covered with HQ CPL veneer, which ensures the highest
quality and guarantees many years of comfortable and reliable door use (Long Life Product).
pattern 1.1
36
pattern 1.2
pattern 1.3
pattern 5.1
NEW COLORS
pattern 5.2
DOOR LEAF CONSTRUCTION
HQ CPL veneer
White
Oak
Milano 1
The door leaf consists of: a finger jointed softwood filled with stabilizing honeycomb core
or perforated chipboard reinforced with inner frame made of plywood (option at an extra
charge) – group 1; group 5 – solid chipboard. The frame and the core are covered with HDF
board on both sides.

Grey
Euroinvest
Beech Porta
Oak
Milano 2
Oak
Milano 3
Mahogany
Walnut
Oak
Milano 4
Oak
Milano 5
NEW
COLORS
White
Walnut
Walnut
Modena 1
samples of colors
LEAF EDGE PROFILE
“K” profile leaf edge. Both side edges and the upper edge of the leaf covered with 1 mm
thick ABS tape of the same colour as the door
FINISHING
The leaf is veneered with veneers: HQ CPL (Continuous Pressure Laminate High Quality)
laminate 0.2 or 0.7 mm thick (group 1 only). MDF frame is veneered in the colour of the
door leaf.
MODELS
Walnut
Modena 1
Single and double leaf: in all patterns.
Door leaf is available in version for sliding door without hinges and rebate and with
a groove for guiding element, slot-milled in the bottom edge of the door leaf (included
in the system).
see pages 156-158
DOOR LEAVES – CROSS-SECTIONS
ACCESSORIES – INCLUDED IN THE LEAF PRICE
•
•
•
•
•
•
solid chipboard reinforced by plywood
„honeycomb” stabilizing
Two standard pintle hinges*
Three hinges for a leaf of dimension „100” and „110”
Lock: for regular key, bathroom lock or for cylinder insert
Pane (pattern “chinchilla”)
Preparation for shortening up to 60 mm (group 5 only)
Round flush handle (for sliding doors)
LEAF SIZES (PAGE 150, TABLE 1)
Single leaf*: „60“, „70“, „80“, „90“, „100“, „110” 1
Double leaf*: „90“ ÷ „200“2
RECOMMENDED DOOR FRAMES (FROM PAGE 124)
• MINIMAX door frame, fixed width: 100 mm
• Adjustable Porta SYSTEM door frame
• Metal door frame
perforated chipboard
NOTES
PROFILE OF GLAZING FRAME
• Grid, ventilation sleeves – 2 rows are available in patterns from group 1 only.
• Preparation for shortening, for an additional charge, applies only to honeycomb core leaves. The
perforated chipboard and solid chipboard core leaves come with preparation for shortening as
standard.
* Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
1 Available only with the perforated chipboard core. Pane’s dimensions are the same as for „100”
size.
2 Arbitrary selection of door leaf sizes for double doors. Passive leaf (side panels) with sizes „30”,
„40”, „50” only in full option.
each glazed model
with tempered glass
(model 1.2 and 1.3 + Group 5)
ADDITIONAL CHARGES (OPTION)
„100”, „110” size
core: perforated chipboard
ventilation: grid, sleeves or undercut
third hinge for the leaf dimensions „60”, „70”, „80” or „90”
preparation for shortening up to 60 mm (group 1)
bulaj – ze stali nierdzewnej (pattern 1.1)
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
hinge covers (set on one pc)
handle with escutcheon (page 144)
each hardened mat pane (pattern 1.2 and group 5)
mat hardened pane (pattern 1.3)
pattern 5.3
pattern 5.4
pattern 5.5
37
SLOT-MILLED

To use this product to all types of premises, especially everywhere where the doors are exposed to intensive use. Suggested
for hotels, office buildings, public places and houses with higher standard. Used ABS tape provides maximum resistance for
mechanical door leaf damage. Leaf with a door frame covered with CPL HQ veneers are guarantee the highest quality and comfort
of a multi-use door (Long Life Product).
pattern A
38
pattern B
pattern C
pattern D
pattern E
pattern F
NEW COLORS
pattern G
DOOR LEAF CONSTRUCTION
HQ CPL veneer
The door leaf consists of a finger jointed softwood frame filled with a perforated chipboard,
reinforced with an internal plywood frame. The frame and the core are covered, on both
sides, with an HDF board.

LEAF EDGE PROFILE
White
Grey
Euroinvest
Beech Porta
Mahogany
Walnut
“K” profile leaf edge. For doors veneered with CPL HQ both side edges and the upper edge
of the leaf covered with 1 mm thick ABS tape of the same colour as the door.
FINISHING
Oak
Milano 1
Oak
Milano 2
Oak
Milano 3
Oak
Milano 4
NEW
COLORS
White
Walnut
Walnut
Modena 1
samples of colors
Walnut
Modena 1
see pages 156-158
Oak
Milano 5
The leaf is covered with 0.2 mm HQ CPL veneer (Continuous Pressure Laminate High
Quality).
MODELS
8 patterns: from „A” to „H”.
Door leaf is available in version for sliding door without hinges and rebate and with
a groove for guiding element slot-milled in the bottom edge of the door leaf (included in
the system)1.
ACCESSORIES – INCLUDED IN THE LEAF PRICE
DOOR LEAVES – CROSS-SECTIONS
•
•
•
•
•
Two standard pintle hinges*
Three hinges for a leaf of dimension „100”
Lock: for regular key, bathroom lock or for cylinder insert
Preparation for shortening up to 60 mm
Round flush handle (for sliding doors)
LEAF SIZES (PAGE 150, TABLE 1)
perforated chipboard
Single leaf*: „60“, „70“, „80“, „90“, „100“
Double leaf*: „120“ ÷ „200“ 2
RECOMMENDED DOOR FRAMES (FROM PAGE 124)
• MINIMAX door frame, fixed width: 100 mm
• Adjustable Porta SYSTEM door frame
• Metal door frame
NOTES
• Depending on the veneer color, we offer two mill colors:
a) light brown (White, Grey Euroinvest, Beech Porta, Maple, Oak Milano 1)
b) dark brown (Mahogany, Walnut, Oak Milano 2 – Oak Milano 5)
* Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
1 A, F and H designs in the sliding door version – for an additional charge – require to be ordered
through the Contract Department.
2 Arbitrary selection of door leaf sizes for double doors.
ADDITIONAL CHARGES (OPTION)
„100” size
ventilation undercut
third hinge for the leaf dimensions „60”, „70”, „80” or „90”
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
hinge covers (set on one pc)
handle with escutcheon (page 144)
pattern H
39
Porta CONCEPT

Porta CONCEPT door range is up to date with the most recent trends in utility design. Popular models are based on a durable
and fancy looking rail structure consisting of horizontal and vertical beams made of the highest quality wooden materials.
This is an offer for those customers who expect doors in which wooden elements prevail in the door leaf structure. The collection
is available in a wide color range of Portadecor, Portadur or Super Matt veneers which helps to match the door to the individual
interior design.
pattern A.0
40
pattern A.3
pattern A.9
pattern B.1
pattern C.0
pattern C.2
DOOR LEAF CONSTRUCTION
Portadecor veneer
Grey
Euroinvest
Leaf frame is made of the highest quality wooden elements manufactured using
warp-resistant blockwood technology. Depending on the model, the leaf is also provided
with horizontal beams and Portadecor, Portacortex, Portadur or Super Matt veneer coated
panels with tempered matt glass panes.

Beech
Bavaria
Oak*
Cherry tree
Walnut
Wenge
NEW
COLORS
Light Oak
Walnut
Verona2
Walnut
Verona1
Super Matt veneer
Walnut
Verona3
White
FINISHING
The leaf is covered with Portadecor, Portacortex, Portadur and Super Matt veneer.
MODELS
Single-or double-leaf in all patterns.
Door leaf is available in version for sliding door without hinges and rebate and with
a groove for guiding element slot-milled in the bottom edge of the door leaf (included
in the system).

NEW
COLORS
ACCESSORIES – INCLUDED IN THE LEAF PRICE
White
Portacortex veneer

NEW
COLORS
Bark 1
LEAF EDGE PROFILE
“K” leaf edge profile. Leaf edge is covered with base material used in the coverage of the
leaves.
Bark 2
Portadur veneer
Bark 3
•
•
•
•
•
Three standard pintle hinges*
Lock: for regular key, bathroom lock or for cylinder insert
Pane (pattern hardened mat)
Preparation for shortening up to 60 mm
Round flush handle (for sliding doors)
LEAF SIZES (PAGE 150, TABLE 1)
Bark 4
Single leaf*: „60”, „70”, „80”, „90”; „100”
Double leaf*: „120” ÷ „200”1

RECOMMENDED DOOR FRAMES – TRIPLE-HINGED (FROM PAGE 124)
Walnut 2
Walnut 3
Walnut 4
Walnut 5
Walnut 6
* till stock-out
samples of colors
• MINIMAX door frame, fixed width: 100 mm
• Adjustable Porta SYSTEM door frame
• Adjustable PRESTIGE door frame
see pages 156-158
NOTES
*
DOOR LEAVES – CROSS-SECTIONS
Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
1 Arbitrary selection of door leaf sizes for double doors.
wooden construction - pine blockboard
Structure of Portacortex veneer
ADDITIONAL CHARGES (OPTION)
„100” size
ventilation sleeves or ventilation undercut
third hinge in door frame
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
hinge covers (set on one pc)
handle with escutcheon (page 144)
pattern C.6
pattern K.0
pattern K.3
41
Porta IDEA

Porta IDEA is a series of internal doors which combine all features of a good product, namely spectacular design, attractive
colours of finishing materials, sturdy structure and, last but not least – affordable price! An innovation in this series consists in the
use of a stunning Portacortex veneer which resembles tree bark and is available in four different fashionable colour shades and
Super Matt veneer. Rails and jambs are made of the best quality wood which ensures many year service.
pattern A.0
42
pattern A.1
pattern A.2
pattern A.3
pattern A.4
pattern B.0
NEW COLLECTION
pattern B.1
DOOR LEAF CONSTRUCTION
Portacortex veneer

NEW
COLORS
Vertical beams of leaf are made of the highest quality wooden elements manufactured
using warp-resistant blockwood technology. Depending on the model, the leaf is also
provided with horizontal beams and Portacortex or Super Matt veneer coated panels with
tempered matt glass panes.
LEAF EDGE PROFILE
Bark 1
Bark 2
Bark 3
Super Matt veneer
Bark 4
“K” leaf edge profile. Leaf edge is covered with base material used in the coverage of the
leaves.

FINISHING
NEW
COLORS
The leaf is covered with Portacortex or Super Matt veneer.
MODELS
White
samples of colors
Single-or double-leaf in all patterns.
Door leaf is available in version for sliding door without hinges and rebate and with
a groove for guiding element slot-milled in the bottom edge of the door leaf (included in
the system)1.
see pages 156-158
ACCESSORIES – INCLUDED IN THE LEAF PRICE
•
•
•
•
•
DOOR LEAVES – CROSS-SECTIONS
Three standard pintle hinges*
Lock: for regular key, bathroom lock or for cylinder insert
Pane (pattern hardened mat)
Preparation for shortening up to 60 mm
Round flush handle (for sliding doors)
LEAF SIZES (PAGE 150, TABLE 1)
Single leaf*: „70”, „80”, „90”; „100”
Double leaf*: „140” ÷ „200”2
wooden construction - pine blockboard
RECOMMENDED DOOR FRAMES – TRIPLE-HINGED (FROM PAGE 124)
• MINIMAX door frame, fixed width: 100 mm
• Adjustable Porta SYSTEM door frame
• Adjustable PRESTIGE door frame
NOTES
*
Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
1 Possible to prepare only in A patterns.
2 Arbitrary selection of door leaf sizes for double doors.
Structure of Portacortex veneer
ADDITIONAL CHARGES (OPTION)
„100” size
ventilation sleeves or ventilation undercut
third hinge in door frame
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
hinge covers (set on one pc)
handle with escutcheon (page 144)
pattern B.2
pattern B.3
pattern B.4
43
NATURE TREND with Porta SYSTEM ELEGANCE door frame
INTERIOR doors
in natural veneers
Doors with natural veneer are made for large group of discerning
clients, for whom natural beauty is of fundamental aesthetic value.
Variety and individual character are highly sought after qualities of
a product, after all, why would we want to live in homes that are all
identical and replicated in millions of units? Just as every human being
is different, so every tree is unique. Nature did not intend for identical
live forms and shapes, and diversity in wood is testament to its natural
pedigeree.
D
We say that wood is still ”living“and ”breathing“, adjusting to its
surroundings. Keeping in mind this information when appraising the
quality of doors we want to purchase, it is important to consider the
compromise between perfection in structure, color, and surface quality
and natural beauty and unique patterns of wood.
Porta KMI Poland, eager to meet the highest expectations of its clients,
works with the best suppliers around the world. They represent well
known and respected companies with decades of experience in
manufacturing and distribution of natural veneers, such as: Danzer, J.u.A
Frischeis, AB Bohmans, Fanerfabrik, Barlinek SA, and ALPI.
Přírodní dýhy, které využíváme, jsme vzhledem na estetické vlastnosti
rozdělili do dvou základních skupin:
Natural veneers chosen by us because of the aesthetic qualities
they possess are divided into two main groups: Standard – used in
Porta CLASSIC, MALAGA, MADRID, CORDOBA, TOLEDO and SEVILLA
collections. This is a group of natural veneers characterised by a variety
of colors, ring patterns, knots and twists in fibres etc. Their character
is a product of the natural environment the trees grew in, climatic
conditions and habitat occurring within the same biological species.
These morphological qualities of wood, characteristic of natural
materials, set it apart from artificial fibre and as such do not constitute
flaws in design.
Select – used in Nova NATURE, Nature STYLE, Nature SPACE, Nature
LINE, Nature TREND, Nature CONCEPT, Nature TREND ELEGANCE,
Nature CONCEPT ELEGANCE collections. This is a specially prepared
and selected natural veneer characterised by high repetition in ring
patterns and dye coloring. Products made with this type of covering
meet the highest standards of quality sought by the most demanding
clients.
Porta CLASSIC
MALAGA
MADRID, CORDOBA
TOLEDO, SEVILLA
Nova NATURE
NATURE LINE
NATURE STYLE
NATURE SPACE
NATURE TREND
NATURE CONCEPT
Enjoy the quality!
new colors!
new collection!
new colors!
new colors!
new colors!
new colors!
new colors!
new colors!
new colors!
new colors!
Porta CLASSIC

Porta CLASSIC are plate doors veneered in natural veneer. The rich colors and interesting design makes it possible to satisfy the
customer needs. We would like to draw your attention to the fact that a few discolorations of veneer and differences in wood
grain are inherent in this group of products and prove their natural origin and the charm of true wood.
128
pattern 1.1
46
pattern 1.2
pattern 1.3
pattern 1.4
pattern 5.1
pattern 5.2
AVAILABLE COLORS
DOOR LEAF CONSTRUCTION
Standard natural veneer
Leaf frame is made from coniferous tree dressing. Leaf filling consists of perforated
chipboard reinforced with an inside plywood rail. The frame, along with the filling is
covered on both sides with a board plated with high quality natural veneer.

LEAF EDGE PROFILE
Oak 1
Oak 2
Oak 3
Oak 4
Oak 5
Oak 6
“K” type door leaf edge profile (rebated doors). Outside leaf rail veneered to match leaf
color.
FINISHING
Limba 1
Limba 2
Limba 3
Sapelli 3
Sapelli 4
Sapelli 6
Limba 4
Limba 6
Maple 1
Four types of natural veneers: Oak (two different patterns of wood grain design – “flower”
and “striped”), Sapelli, Limba or Maple. The door leaf is painted in one out of several colours
with ecologically safe water varnish and hardened using UV (light) technology.
MODELS
Satin natural veneer

NEW
COLORS
Bianco
Tabacco
samples of colors
Mocca
Single and double doors: in all patterns.
Door leaf is available in version for sliding door without hinges and rebate and with
a groove for guiding element slot-milled in the bottom edge of the door leaf (included in
the system).
ACCESSORIES – INCLUDED IN THE LEAF PRICE
•
•
•
•
Nero
see pages 156-158
Lock: for regular key, bathroom lock or for cylinder insert
Pane (pattern ”chinchilla“ or ”hardened mat“)
Preparation for shortening up to 60 mm
Round flush handle (for sliding doors)
LEAF SIZES (PAGE 150, TABLE 1)
Single leaf*: „60“, „70“, „80“, „90“, „100”
Double leaf*: „120“ ÷ „200“1
DOOR LEAVES – CROSS-SECTIONS
perforated chipboard
rebated doors
RECOMMENDED DOOR FRAMES (FROM PAGE 124)
perforated chipboard
non-rebated doors
• MINIMAX door frame, fixed width: 100 mm
• Adjustable Porta SYSTEM door frame
• Adjustable PRESTIGE door frame
• Adjustable Porta SYSTEM ELEGANCE door frame2
The recommended natural veneer door frames come equipped with set of three „PRIME”
pintle hinges (rebated doors) or two 3D adjustable (non-rebated doors). The leaf is not
equipped with hinge part.
NOTES
• Leaves available also in a non-painted version, at the price of the standard product.
• Ventilation sleeves available in silver or golden colour – 1 row.
* Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
1
Arbitrary selection of door leaf sizes for double doors. Passive leaf (side panel) with sizes „30”,
„40”, „50” only in full option. To double non-rebated doors must be ordered active and passive
door leaf.
2 „100“ size – third 3D adjustable hinge.
ADDITIONAL CHARGES (OPTION)
„100” size
ventilation undercut, ventilation sleeves (1 row), ventilation sleeves
(2 rows –1.1, 1.2, 1.3 patterns)
drilled hole for third hinge for the leaf dimensions „60”, „70” or „80”
bull’s eye made from stainless steel (pattern 1.1 only)
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
handle with escutcheon (page 144)
finishing with satin natural veneer – all patterns
pattern 5.3
pattern 5.4
pattern 5.5
47
MALAGA

MALAGA doors include classic models which perfectly fit the apartments, houses or residences with traditional interior decor.
Simple design and natural veneer make the door present themselves perfectly in the indoor spaces where unadorned simplicity
combines with the elegance of classic designs. Differences in colours of veneer both on the door leaves and between the leaves
and frames as well as the differences in wood grain are inherent in thisgroup of products and prove their natural origin and the
charm of true wood.
NEW COLLECTION
128
pattern A.0
48
pattern A.1
pattern B.0
pattern B.1
pattern B.2
pattern B.3
AVAILABLE COLORS
DOOR LEAF CONSTRUCTION
Standard natural veneer
The door leaf consists of a frame made of high quality wood, plywood and chipboard. Door
leaf panel and frame are faced with one of three high quality natural veneers. External rail
finished with veneer in the door leaf colour. The technology used gives a door leaf highly
resistant to deformations.

LEAF EDGE PROFILE
Oak 6
Oak 1
Oak 2
Oak 3
Oak 4
Oak 5
Limba 1
Limba 2
Limba 3
Limba 4
Limba 6
Sapelli 3
Sapelli 4
Sapelli 6
“K” type door leaf edge profile (rebated doors). Outside leaf rail veneered to match leaf
color.
FINISHING
The door leaf is painted with ecologically safe water varnish and hardened using UV (light)
technology.
MODELS
Satin natural veneer

NEW
COLORS
Bianco
Tabacco
samples of colors
Mocca
Single and double doors: in all patterns.
Door leaf is available in version for sliding door without hinges and rebate and with
a groove for guiding element slot-milled in the bottom edge of the door leaf (included in
the system).
ACCESSORIES – INCLUDED IN THE LEAF PRICE
•
•
•
•
•
•
Nero
see pages 156-158
Lock: for regular key, bathroom lock or for cylinder insert
Pane (pattern ”chinchilla“ or ”hardened mat“)
Preparation for shortening up to 60 mm
Round flush handle (for sliding doors)
Pane fixing seal
Preparation for shortening up to 40 mm1
LEAF SIZES (PAGE 150, TABLE 1)
Single leaf*: „60“, „70“, „80“, „90“, „100”
Double leaf*: „120“ ÷ „200“2
DOOR LEAVES – CROSS-SECTIONS
RECOMMENDED DOOR FRAMES (FROM PAGE 124)
multilayer structure
non-rebated doors
multilayer structure
rebated doors
• MINIMAX door frame, fixed width: 100 mm
• Adjustable Porta SYSTEM door frame
• Adjustable PRESTIGE door frame
• Adjustable Porta SYSTEM ELEGANCE door frame3
The recommended natural veneer door frames come equipped with set of three „PRIME”
pintle hinges (rebated doors) or two 3D adjustable (non-rebated doors). The leaf is not
equipped with hinge part.
NOTES
• Leaves available also in a non-painted version, at the price of the standard product.
• Ventilation sleeves available in silver or golden colour – 1 row.
* Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
1 Door leaf with ventilation slot - shortening up to 20 mm.
2 Arbitrary selection of door leaf sizes for double doors. To double non-rebated doors must be
ordered active and passive door leaf.
3 „100“ size – third 3D adjustable hinge.
ADDITIONAL CHARGES (OPTION)
„100” size
ventilation: sleeves, undercut or slot
drilled hole for third hinge for the leaf dimensions „60”, „70” or „80”
closing trim for double door
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
handle with escutcheon (page 144)
finishing with satin natural veneer – all patterns
pattern C.0
pattern C.1
pattern C.2
49
MADRID, CORDOBA

MADRID and CORDOBA models with their flush construction, natural veneer and unique technology present themselves
perfectly in the indoor spaces where natural appearance combines with the elegance of classic design. We would like to draw
your attention to the fact that a few discolorations of veneer and differences in wood grain are inherent in this group of products
and prove their natural origin and the charm of true wood.
128
Design inspired by the application of Module RETRO - details, see page 126.
MADRID
full
50
MADRID
small light
MADRID
medium sash
MADRID
large sash
CORDOBA
full
CORDOBA
small light
AVAILABLE COLORS
DOOR LEAF CONSTRUCTION
Standard natural veneer
The door leaf consists of a frame made of high quality wood, plywood and chipboard. Door
leaf panel and frame are faced with one of four high quality natural veneers. External rail
finished with veneer in the door leaf colour. The technology used gives a door leaf highly
resistant to deformations.

LEAF EDGE PROFILE
Oak 1
Oak 2
Oak 3
Oak 4
Oak 5
Limba 1
Limba 2
Limba 3
Limba 4
Limba 6
Sapelli 3
Sapelli 4
Sapelli 6
Oak 6
“K” type door leaf edge profile (rebated doors). Outside leaf rail veneered to match leaf
color.
FINISHING
The door leaf is painted with ecologically safe water varnish and hardened using UV (light)
technology.
MODELS
Satin natural veneer

NEW
COLORS
Bianco
Tabacco
samples of colors
Mocca
Single doors: full, glazed.
Single door with side panel.
Double doors: full, glazed.
Door leaf is available in version for sliding door without hinges and rebate and with
a groove for guiding element slot-milled in the bottom edge of the door leaf (included in
the system).
ACCESSORIES – INCLUDED IN THE LEAF PRICE
Nero
•
•
•
•
•
see pages 156-158
Lock: for regular key, bathroom lock or for cylinder insert
Pane (pattern “chinchilla” or ”hardened mat“)
Pane fixing seal
Round flush handle (for sliding doors)
Preparation for shortening up to 40 mm1
LEAF SIZES (PAGE 150, TABLE 1)
DOOR LEAVES – CROSS-SECTIONS
Single leaf*: „60“, „70“, „80“, „90“, ‘100”
Double leaf*: „120“ ÷ „200“2
RECOMMENDED DOOR FRAMES (FROM PAGE 124)
multilayer structure
non-rebated doors
multilayer structure
rebated doors
• MINIMAX door frame, fixed width: 100 mm
• Adjustable Porta SYSTEM door frame
• Adjustable PRESTIGE door frame
• Adjustable Porta SYSTEM ELEGANCE door frame3
The recommended natural veneer door frames come equipped with set of three „PRIME”
pintle hinges (rebated doors) or two 3D adjustable (non-rebated doors). The leaf is not
equipped with hinge part.
NOTES
• Leaves available also in a non-painted version, at the lower price.
• Ventilation sleeves available in silver or golden colour – 1 row.
* Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
1 Door leaf with ventilation slot – shortening up to 20 mm.
2 Arbitrary selection of door leaf sizes for double doors. To double non-rebated doors must be
ordered active and passive door leaf.
3 „100“ size – third 3D adjustable hinge.
ADDITIONAL CHARGES (OPTION)
„100” size
ventilation: sleeves, undercut or slot
drilled hole for third hinge for the leaf dimensions „60”, „70” or „80”
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
closing trim for double door
handle with escutcheon (page 144)
finishing with satin natural veneer – all patterns
CORDOBA
medium sash
CORDOBA
large sash
51
TOLEDO, SEVILLA

TOLEDO and SEVILLA models with their flush construction, natural veneer and unique technology present themselves perfectly
in the indoor areas where natural appearance combines with the elegance of classic design. We would like to draw your attention
to the fact that a few discolorations of veneer and differences in wood grain are inherent in this group of products and prove their
natural origin and the charm of true wood.
128
TOLEDO
full
52
TOLEDO
pattern 1
TOLEDO
pattern 2
TOLEDO
pattern 3
TOLEDO
pattern 4
TOLEDO
pattern 5
AVAILABLE COLORS
DOOR LEAF CONSTRUCTION
Standard natural veneer
The door leaf consists of a frame made of high quality wood, plywood and chipboard. Door
leaf panel and frame are faced with one of four high quality natural veneers. External rail
finished with veneer in the door leaf colour. The technology used gives a door leaf highly
resistant to deformations.

LEAF EDGE PROFILE
Oak 1
Oak 2
Oak 3
Oak 4
Oak 5
Limba 1
Limba 2
Limba 3
Limba 4
Limba 6
Sapelli 3
Sapelli 4
Sapelli 6
Oak 6
“K” type door leaf edge profile (rebated doors). Outside leaf rail veneered to match leaf
color.
FINISHING
The door leaf is painted with ecologically safe water varnish and hardened using UV (light)
technology.
MODELS
Satin natural veneer

NEW
COLORS
Bianco
Tabacco
samples of colors
Mocca
Single doors: full, glazed.
Single door with side panel.
Double doors: full, glazed.
Door leaf is available in version for sliding door without hinges and rebate and with
a groove for guiding element slot-milled in the bottom edge of the door leaf (included in
the system).
ACCESSORIES – INCLUDED IN THE LEAF PRICE
Nero
•
•
•
•
•
see pages 156-158
DOOR LEAVES – CROSS-SECTIONS
Lock: for regular key, bathroom lock or for cylinder insert
Pane (pattern “chinchilla” or ”hardened mat“)
Pane fixing seal
Round flush handle (for sliding doors)
Preparation for shortening up to 40 mm1
LEAF SIZES (PAGE 150, TABLE 1)
Single leaf*: „60“, „70“, „80“, „90“, „100”
Double leaf*: „120“ ÷ „200“ 2
RECOMMENDED DOOR FRAMES (FROM PAGE 124)
multilayer structure
rebated doors
multilayer structure
non-rebated doors
• MINIMAX door frame, fixed width: 100 mm
• Adjustable Porta SYSTEM door frame
• Adjustable PRESTIGE door frame
• Adjustable Porta SYSTEM ELEGANCE door frame3
The recommended natural veneer door frames come equipped with set of three „PRIME”
pintle hinges (rebated doors) or two 3D adjustable (non-rebated doors). The leaf is not
equipped with hinge part.
NOTES
• Leaves available also in a non-painted version, at the lower price.
• Ventilation sleeves available in silver or golden colour – 1 row.
* Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
1 Door leaf with ventilation slot – shortening up to 20 mm.
2 Arbitrary selection of door leaf sizes for double doors. To double non-rebated doors must be
ordered active and passive door leaf.
3 „100“ size – third 3D adjustable hinge.
ADDITIONAL CHARGES (OPTION)
„100” size
ventilation: sleeves, undercut or slot
drilled for third hinge for the leaf dimensions „60”, „70” or „80”
closing trim for double door
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
handle with escutcheon (page 144)
finishing with satin natural veneer – all patterns
SEVILLA
full
SEVILLA
glazed
53
SIDE PANELS

We have prepared an additional range of attachments to complement the range of MADRID, CORDOBA, TOLEDO, SEVILLA leaves.
We would like to draw your attention to the fact that a few discolorations of veneer and differences in wood grain are inherent in
this group of products and prove their natural origin and the charm of true wood.
128
pattern A
54
pattern B
pattern K
pattern C
pattern D
pattern E
pattern F
pattern G
AVAILABLE COLORS
DOOR LEAF CONSTRUCTION
Standard natural veneer
The side panel consists of a frame made of high quality wood, plywood and chipboard.
Door leaf panel and frame are faced with one of four high quality natural veneers. External
rail finished with veneer in the door leaf colour. The technology used gives a side panel
highly resistant to deformations.

FINISHING
Oak 1
Oak 2
Oak 3
Oak 4
Oak 5
Limba 1
Limba 2
Limba 3
Limba 4
Limba 6
Oak 6
The door leaf is painted with ecologically safe water varnish and hardened using UV (light)
technology.
MODELS
Eleven patterns: „A” ÷ „K”
AKCESORIA – INCLUDED IN THE LEAF PRICE
Sapelli 3
Sapelli 4
Satin natural veneer
• Pane (pattern ”chinchilla“or ”hardened mat“)
• Pane fixing seal
Sapelli 6

SIDE PANEL SIZES
NEW
COLORS
Bianco
Tabacco
samples of colors
Mocca
Nero
„40”
NOTES
• The recommended natural veneer door frames come equipped with a set of three „PRIME” pintle
hinges (rebated doors) or two 3D adjustable (non-rebated doors). The leaf is not equipped with
the hinge part. Side panel is not equipped with the hinge part.
• Side panels available in an unpainted version as well, for self-finishing.
see pages 156-158
DOOR LEAVES – CROSS-SECTIONS
multilayer structure
non-rebated doors
multilayer structure
rebated doors
ADDITIONAL CHARGES (OPTION)
drilled hole for third hinge
every hardened mat pane in patterns B, C, D, E, F, G, K
hardened mat pane (pattern I)
finishing with satin natural veneer – all patterns
pattern H
pattern I
pattern J
55
Nova NATURE

Nova NATURE range features modern and original designs combined with natural veneers, which guarantee grainwood and
colour replicability throughout the whole leaf surface.
128
Design inspired by the application of Module RETRO – details, see page 126.
pattern 1.1
56
pattern 1.2
pattern 1.3
pattern 2.1
pattern 2.2
pattern 3.1
AVAILABLE COLORS
DOOR LEAF CONSTRUCTION
Select natural veneer
Leaf frame is made from coniferous tree dressing. Leaf filling consists of perforated
chipboard reinforced with an inside plywood rail. The frame, along with the filling is
covered on both sides with a board plated with high quality natural veneer.

LEAF EDGE PROFILE
Oak
Teak
Cherry
Rosewood
Wenge
NEW
COLORS
White Oak
American
Walnut
samples of colors
Classic
Walnut
Ebony
“K” type door leaf edge profile (rebated doors). Outside leaf rail veneered to match leaf
color.
FINISHING
Door leaf is covered with select natural veneer, quality of which guarantees repeatability
of each pattern and uniform of dyeing process. MDF frame is veneered in the colour of the
door leaf.
Dark
Walnut
see pages 156-158
MODELS
Single-or double-leaf in all patterns of each group.
Door leaf is available in version for sliding door without hinges and rebate and with
a groove for guiding element slot-milled in the bottom edge of the door leaf (included in
the system).
DOOR LEAVES – CROSS-SECTIONS
ACCESSORIES – INCLUDED IN THE LEAF PRICE
•
•
•
•
Lock: for regular key, bathroom lock or for cylinder insert
Hardened pane patterns: “mat“; ”wave”; „squares“; MasterCarre
Preparation for shortening up to 60 mm
Round flush handle (for sliding doors)
LEAF SIZES (PAGE 150, TABLE 1)
perforated chipboard
rebated doors
perforated chipboard
non-rebated doors
Single leaf*: „60”, „70”, „80”, „90”, „100”
Double leaf*: „90” ÷ „200”1
RECOMMENDED DOOR FRAMES – TRIPLE-HINGED (FROM PAGE 124)
PROFILE OF GLAZING FRAME
• MINIMAX door frame, fixed width: 100 mm
• Adjustable Porta SYSTEM door frame
• Adjustable PRESTIGE door frame
• Adjustable Porta SYSTEM ELEGANCE door frame2
The recommended natural veneer door frames come equipped with set of three „PRIME”
pintle hinges (rebated doors) or two 3D adjustable (non-rebated doors). The leaf is not
equipped with hinge part.
all glazed models
or models with HDF board
NOTES
• Ventilation sleeves available in silver or golden colour – 1 row or 2 rows (1 group only).
* Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
1 Arbitrary selection of door leaf sizes for double doors.Passive leaf (side panel) with sizes „30”, „40”,
„50” only in full option. To double non-rebated doors must be ordered active and passive door
leaf.
2 „100“ size – third 3D adjustable hinge.
ADDITIONAL CHARGES (OPTION)
„100” size
ventilation: sleeves, undercut
bull’s eye made from stainless steel (pattern 1.1 only)
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
handle with escutcheon (page 144)
pattern 3.2
57
Nova NATURE

Nova NATURE range features modern and original designs combined with natural veneers, which guarantee grainwood and
colour replicability throughout the whole leaf surface.
128
pattern 4.1
58
pattern 4.2
pattern 4.3
pattern 4.4
pattern 5.1
pattern 5.2
AVAILABLE COLORS
DOOR LEAF CONSTRUCTION
Select natural veneer
Leaf frame is made from coniferous tree dressing. Leaf filling consists of perforated
chipboard reinforced with an inside plywood rail. The frame, along with the filling is
covered on both sides with a board plated with high quality natural veneer.

LEAF EDGE PROFILE
Oak
Teak
Cherry
Rosewood
Wenge
Ebony
NEW
COLORS
White Oak
American
Walnut
samples of colors
Classic
Walnut
“K” type door leaf edge profile (rebated doors). Outside leaf rail veneered to match leaf
color.
FINISHING
Door leaf is covered with select natural veneer, quality of which guarantees repeatability
of each pattern and uniform of dyeing process. MDF frame is veneered in the colour of the
door leaf.
Dark
Walnut
see pages 156-158
MODELS
Single-or double-leaf in all patterns of each group.
Door leaf is available in version for sliding door without hinges and rebate and with
a groove for guiding element slot-milled in the bottom edge of the door leaf (included in
the system).
DOOR LEAVES – CROSS-SECTIONS
ACCESSORIES – INCLUDED IN THE LEAF PRICE
•
•
•
•
Lock: for regular key, bathroom lock or for cylinder insert
Hardened pane patterns: “mat“; ”wave”; „squares“; MasterCarre
Preparation for shortening up to 60 mm
Round flush handle (for sliding doors)
LEAF SIZES (PAGE 150, TABLE 1)
perforated chipboard
rebated doors
perforated chipboard
non-rebated doors
Single leaf*: „60”, „70”, „80”, „90”, „100”
Double leaf*: „120” ÷ „180”1
RECOMMENDED DOOR FRAMES – RIPLE-HINGED (FROM PAGE 124)
• MINIMAX door frame, fixed width: 100 mm
• Adjustable Porta SYSTEM door frame
• Adjustable PRESTIGE door frame
• Adjustable Porta SYSTEM ELEGANCE door frame2
The recommended natural veneer door frames come equipped with set of three „PRIME”
pintle hinges (rebated doors) or two 3D adjustable (non-rebated doors). The leaf is not
equipped with hinge part.
PROFILE OF GLAZING FRAME
all glazed models
or models with HDF board
NOTES
• Ventilation sleeves available in silver or golden colour – 1 row.
* Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
1 Arbitrary selection of door leaf sizes for double doors. To double non-rebated doors must be
ordered active and passive door leaf.
2 „100“ size – third 3D adjustable hinge.
ADDITIONAL CHARGES (OPTION)
„100” size
ventilation: sleeves, undercut
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
handle with escutcheon (page 144)
pattern 5.3
pattern 5.4
pattern 5.5
59
Nova NATURE

Nova NATURE range features modern and original designs combined with natural veneers, which guarantee grainwood and
colour replicability throughout the whole leaf surface.
128
pattern 6.1
60
pattern 6.2
pattern 6.3
pattern 7.1
pattern 7.2
pattern 7.3
AVAILABLE COLORS
DOOR LEAF CONSTRUCTION
Select natural veneer
Leaf frame is made from coniferous tree dressing. Leaf filling consists of perforated
chipboard reinforced with an inside plywood rail. The frame, along with the filling is
covered on both sides with a board plated with high quality natural veneer.

LEAF EDGE PROFILE
Oak
Teak
Cherry
Rosewood
Wenge
NEW
COLORS
White Oak
samples of colors
American
Walnut
Classic
Walnut
Ebony
“K” type door leaf edge profile (rebated doors). Outside leaf rail veneered to match leaf
color.
FINISHING
Door leaf is covered with select natural veneer, quality of which guarantees repeatability
of each pattern and uniform of dyeing process. MDF frame is veneered in the colour of the
door leaf.
Dark
Walnut
see pages 156-158
MODELS
Single-or double-leaf in all patterns of each group.
Door leaf is available in version for sliding door without hinges and rebate and with
a groove for guiding element slot-milled in the bottom edge of the door leaf (included in
the system).
DOOR LEAVES – CROSS-SECTIONS
ACCESSORIES – INCLUDED IN THE LEAF PRICE
•
•
•
•
Lock: for regular key, bathroom lock or for cylinder insert
Hardened pane patterns: “mat“; ”wave”; ”squares“; MasterCarre
Preparation for shortening up to 60 mm
Round flush handle (for sliding doors)
LEAF SIZES (PAGE 150, TABLE 1)
perforated chipboard
rebated doors
perforated chipboard
non-rebated doors
Single leaf*: „60”, „70”, „80”, „90”, „100”
Double leaf*: „90” ÷ „200”1
RECOMMENDED DOOR FRAMES – TRIPLE-HINGED (FROM PAGE 124)
PROFILE OF GLAZING FRAME
• MINIMAX door frame, fixed width: 100 mm
• Adjustable Porta SYSTEM door frame
• Adjustable PRESTIGE door frame
• Adjustable Porta SYSTEM ELEGANCE door frame2
The recommended natural veneer door frames come equipped with set of three „PRIME”
pintle hinges (rebated doors) or two 3D adjustable (non-rebated doors). The leaf is not
equipped with hinge part.
all glazed models
or models with HDF board
NOTES
• Ventilation sleeves available in silver or golden colour – 1 or 2 rows.
* Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
1 Arbitrary selection of door leaf sizes for double doors. Passive leaf (side panel) with sizes „30”, „40”,
„50” only in full option. To double non-rebated doors must be ordered active and passive door
leaf.
2 „100“ size – third 3D adjustable hinge.
ADDITIONAL CHARGES (OPTION)
„100” size
ventilation: sleeves, undercut
bull’s eye made from stainless steel (patterns 6.1; 7.1 only)
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
handle with escutcheon (page 144)
61
NATURE LINE

The Nature LINE design is tied to the highly popular Porta LINE range. Aluminum marquetry, combined with natural, “select” type
veneer create an interesting combination corresponding to contemporary trends in interior decoration.
128
pattern A.1
62
pattern A.3
pattern B.1
pattern C.2
pattern D.2
pattern E.2
AVAILABLE COLORS
DOOR LEAF CONSTRUCTION
Select natural veneer
The leaf frame is made of coniferous timber dressing, while the perforated chipboard core
is reinforced with an internal plywood frame. The frame, along with the core, is covered,
on both sides, with high quality natural veneer. The leaves come equipped with 6 mm thick
aluminum marquetry (silver or golden).
Oak

Teak
Cherry
Rosewood
Wenge
NEW
COLORS
White Oak
samples of colors
American
Walnut
Ebony
LEAF EDGE PROFILE
“K” type door leaf edge profile (rebated doors). Outside leaf rail veneered to match leaf
color.
FINISHING
Classic
Walnut
Dark
Walnut
Door leaf is covered with select natural veneer, quality of which guarantees repeatability of
each pattern and uniform of dyeing process.
see pages 156-158
MODELS
Single-or double-leaf in all patterns.
Door leaf is available in version for sliding door without hinges and rebate and with
a groove for guiding element slot-milled in the bottom edge of the door leaf (included in
the system).
DOOR LEAVES – CROSS-SECTIONS
ACCESSORIES – INCLUDED IN THE LEAF PRICE
• Lock: for regular key, bathroom lock or for cylinder insert
• Preparation for shortening up to 60 mm
• Round flush handle (for sliding doors)
LEAF SIZES (PAGE 150, TABLE 1)
perforated chipboard
rebated doors
perforated chipboard
non-rebated doors
Single leaf*: „60”, „70”, „80”, „90”, „100”
Double leaf*: „120” ÷ „200” 1
RECOMMENDED DOOR FRAMES – TRIPLE-HINGED (FROM PAGE 124)
• MINIMAX door frame, fixed width: 100 mm
• Adjustable Porta SYSTEM door frame
• Adjustable PRESTIGE door frame
• Adjustable Porta SYSTEM ELEGANCE door frame2
The recommended natural veneer door frames come equipped with set of three „PRIME”
pintle hinges (rebated doors) or two 3D adjustable (non-rebated doors). The leaf is not
equipped with hinge part.
NOTES
• Ventilation sleeves available in silver or golden colour – 1 or 2 rows, not available in D.2. pattern.
* Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
1 Arbitrary selection of door leaf sizes for double doors. To double non-rebated doors must be
ordered active and passive door leaf.
2 „100“ size – third 3D adjustable hinge.
aluminum marquetry – silver color
ADDITIONAL CHARGES (OPTION)
„100” size
ventilation: sleeves, undercut
bull’s eye made from stainless steel (not available in pattern E.2)
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
aluminum marquetry – golden color
handle with escutcheon (page 144)
63
NATURE STYLE

This line of products draws on the highly esteemed Porta STYLE collection. The natural veneer used in combination with intriguing
designs create a choice for people in search of exceptional decorating solutions where the prestige is underlined by the finishing
materials they utilise.
128
pattern 1
64
pattern 2
pattern 3
pattern 4
pattern 5
AVAILABLE COLORS
DOOR LEAF CONSTRUCTION
Select natural veneer
Leaf frame is made from coniferous tree dressing. Leaf filling consists of perforated
chipboard reinforced with an inside plywood rail. The frame, along with the filing is covered
on both sides with a board plated with high quality natural veneer.

LEAF EDGE PROFILE
Oak
Teak
Cherry
Rosewood
Wenge
NEW
COLORS
White Oak
samples of colors
American
Walnut
Classic
Walnut
Ebony
“K” type door leaf edge profile (rebated doors). Outside leaf rail veneered to match leaf
color.
FINISHING
Door leaf is covered with select natural veneer, quality of which guarantees repeatability
of each pattern and uniform of dyeing process. MDF frame is veneered in the colour of the
door leaf.
Dark
Walnut
see pages 156-158
MODELS
Single-or double-leaf in all patterns.
Door leaf is available in version for sliding door without hinges and rebate and with
a groove for guiding element slot-milled in the bottom edge of the door leaf (included in
the system).
DOOR LEAVES – CROSS-SECTIONS
ACCESSORIES – INCLUDED IN THE LEAF PRICE
•
•
•
•
Lock: for regular key, bathroom lock or for cylinder insert
Hardened mat pane
Preparation for shortening up to 60 mm
Round flush handle (for sliding doors)
LEAF SIZES (PAGE 150, TABLE 1)
perforated chipboard
rebated doors
perforated chipboard
non-rebated doors
Single leaf*: „60”, „70”, „80”, „90”, „100”
Double leaf*: „120” ÷ „200”1
RECOMMENDED DOOR FRAMES – TRIPLE-HINGED (FROM PAGE 124)
PROFILE OF GLAZING FRAME
• MINIMAX door frame, fixed width: 100 mm
• Adjustable Porta SYSTEM door frame
• Adjustable PRESTIGE door frame
• Adjustable Porta SYSTEM ELEGANCE door frame2
The recommended natural veneer door frames come equipped with set of three „PRIME”
pintle hinges (rebated doors) or two 3D adjustable (non-rebated doors). The leaf is not
equipped with hinge part.
all glazed models
or models with HDF board
NOTES
• Ventilation sleeves available in silver or golden colour – 1 or 2 rows, not available in 5 pattern.
* Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
1 Arbitrary selection of door leaf sizes for double doors. To double non-rebated doors must be
ordered active and passive door leaf.
2 „100“ size – third 3D adjustable hinge.
ADDITIONAL CHARGES (OPTION)
„100” size
ventilation: sleeves, undercut
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
handle with escutcheon (page 144)
65
NATURE TREND

Nature TREND is an effective combination of a mat glass and panels covered with the natural, “select” type veneer with aluminum
inserts. It is an interesting proposal for those who value modern solutions defining the character of the interior they live and
work in.
128
pattern A.0
66
pattern A.1
pattern A.2
pattern A.3
pattern A.4
pattern B.0
pattern B.1
AVAILABLE COLORS
DOOR LEAF CONSTRUCTION
Select natural veneer
The frame-structure leaves are made of vertical and horizontal elements from high quality
coniferous timber, plywood and perforated chipboard. Depending on the model, the leaf
frame is filled with the suitable format MDF board with a natural veneer. 6 mm aluminum
marquetry (silver or golden) and a hardened, mat glass complete the product.
Oak
Teak

Cherry
Rosewood
Wenge
Ebony
NEW
COLORS
White Oak
American
Walnut
samples of colors
LEAF EDGE PROFILE
“K” type door leaf edge profile (rebated doors). Outside leaf rail veneered to match leaf
color.
FINISHING
Classic
Walnut
Dark
Walnut
see pages 156-158
Door leaf is covered with select natural veneer, quality of which guarantees repeatability of
each pattern and uniform of dyeing process.
MODELS
Single-or double-leaf in all patterns.
Door leaf is available in version for sliding door without hinges and rebate and with
a groove for guiding element slot-milled in the bottom edge of the door leaf (included in
the system).
ACCESSORIES – INCLUDED IN THE LEAF PRICE
DOOR LEAVES – CROSS-SECTIONS
•
•
•
•
Lock: for regular key, bathroom lock or for cylinder insert
Hardened mat pane
Preparation for shortening up to 60 mm
Round flush handle (for sliding doors)
LEAF SIZES (PAGE 150, TABLE 1)
wooden construction - pine blockboard
rebated doors
wooden construction - pine blockboard
non-rebated doors
Single leaf*: „60”, „70”, „80”, „90”, „100”
Double leaf*: „120” ÷ „200”1
RECOMMENDED DOOR FRAMES – TRIPLE-HINGED (FROM PAGE 124)
• MINIMAX door frame, fixed width: 100 mm
• Adjustable Porta SYSTEM door frame
• Adjustable PRESTIGE door frame
• Adjustable Porta SYSTEM ELEGANCE door frame2
The recommended natural veneer door frames come equipped with set of three „PRIME”
pintle hinges (rebated doors) or two 3D adjustable (non-rebated doors). The leaf is not
equipped with hinge part.
NOTES
• Ventilation sleeves available in silver or golden colour – 1 row
* Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
1 Arbitrary selection of door leaf sizes for double doors. To double non-rebated doors must be
ordered active and passive door leaf.
2 „100“ size – third 3D adjustable hinge.
aluminum marquetry – silver color
aluminum marquetry – golden color
ADDITIONAL CHARGES (OPTION)
„100” size
ventilation: sleeves, undercut
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
handle with escutcheon (page 144)
pattern B.2
pattern B.3
67
NATURE SPACE

Nature SPACE answers the need for designing modern interiors, where a significant role is played by light and space.
We recommend these models at clients who wish to make their homes stand out with exceptionally attractive and modern styles
of interior arrangement.
128
pattern 1
68
pattern 2
pattern 3
pattern 4
pattern 5
AVAILABLE COLORS
DOOR LEAF CONSTRUCTION
Select natural veneer
Leaf frame is built from vertical stiles made of high quality coniferous lumber, plywood and
solid chipboard, joined with a tempered frosted glass pane 8 mm thick.

LEAF EDGE PROFILE
Oak
Teak
Cherry
Rosewood
Wenge
Ebony
NEW
COLORS
White Oak
samples of colors
American
Walnut
Classic
Walnut
Dark
Walnut
“K” type door leaf edge profile (rebated doors). Outside leaf rail veneered to match leaf
color.
FINISHING
Door leaf is covered with select natural veneer, quality of which guarantees repeatability of
each pattern and uniform of dyeing process.
MODELS
Single-or double-leaf in all patterns.
Door leaf is available in version for sliding door without hinges and rebate and with
c-section metal rail on the leaf for guiding (included in the system).
see pages 156-158
ACCESSORIES – INCLUDED IN THE LEAF PRICE
• Lock: for regular key, bathroom lock or for cylinder insert
• Hardened mat pane (width is dependent on leaf size)
DOOR LEAVES – CROSS-SECTIONS
LEAF SIZES (PAGE 150, TABLE 1)
Single leaf*: „60”, „70”, „80”, „90”, „100” 1
Double leaf*: „120” – „200”
RECOMMENDED DOOR FRAMES – TRIPLE-HINGED (FROM PAGE 124)
solid chipboard reinforced by plywood
rebated doors
solid chipboard reinforced by plywood
non-rebated doors
• MINIMAX door frame, fixed width: 100 mm
• Adjustable Porta SYSTEM door frame
• Adjustable PRESTIGE door frame
• Adjustable Porta SYSTEM ELEGANCE door frame2
The recommended natural veneer door frames come equipped with set of three „PRIME”
pintle hinges (rebated doors) or two 3D adjustable (non-rebated doors). The leaf is not
equipped with hinge part.
NOTES
*
Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
1 Arbitrary selection of door leaf sizes for double doors. To double non-rebated doors must be
ordered active and passive door leaf.
2 „100“ size – third 3D adjustable hinge.
ADDITIONAL CHARGES (OPTION)
„100” size
handle with escutcheon (page 144)
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
69
NATURE CONCEPT

Nature CONCEPT is a door collection aimed at clients, for whom doors, beside the functionality associated with them, also
constitute an important decorative element. Natural veneers applied, fit in ideally wherever aesthetics play a leading role,
build the proper ambience, and exceptional climate that often determines our well being.
128
Design inspired by the application of Module RETRO – details, see page 126.
pattern A.0
70
pattern A.3
pattern A.9
pattern B.1
pattern C.0
pattern C.2
pattern C.6
AVAILABLE COLORS
DOOR LEAF CONSTRUCTION
Select natural veneer
The frame-structure leaves are made of vertical and horizontal elements from high quality
coniferous timber, plywood and perforated chipboard. Depending on the model, the leafs
are made of HDF boards covered with a natural veneer, as well as of relief board 1 and
tempered glass.
Oak
Teak

Cherry
Rosewood
Wenge
Ebony
NEW
COLORS
White Oak
FINISHING
American
Walnut
samples of colors
LEAF EDGE PROFILE
“K” type door leaf edge profile (rebated doors). Outside leaf rail veneered to match leaf
color.
Classic
Walnut
Dark
Walnut
Door leaf is covered with select natural veneer, quality of which guarantees repeatability of
each pattern and uniform of dyeing process.
see pages 156-158
MODELS
Single-or double-leaf in all patterns.
Door leaf is available in version for sliding door without hinges and rebate and with
a groove for guiding element slot-milled in the bottom edge of the door leaf (included in
the system).
DOOR LEAVES – CROSS-SECTIONS
ACCESSORIES – INCLUDED IN THE LEAF PRICE
•
•
•
•
wooden construction - pine blockboard
rebated doors
wooden construction - pine blockboard
non-rebated doors
Lock: for regular key, bathroom lock or for cylinder insert
Hardened mat pane
Preparation for shortening up to 60 mm
Round flush handle (for sliding doors).
LEAF SIZES (PAGE 150, TABLE 1)
Single leaf: „60”, „70”, „80”, „90”, „100”
Double leaf: „120” ÷ „200” 2
RECOMMENDED DOOR FRAMES – TRIPLE-HINGED (FROM PAGE 124)
• MINIMAX door frame, fixed width: 100 mm
• Adjustable Porta SYSTEM door frame
• Adjustable PRESTIGE door frame
• Adjustable Porta SYSTEM ELEGANCE door frame3
The recommended natural veneer door frames come equipped with set of three „PRIME”
pintle hinges (rebated doors) or two 3D adjustable (non-rebated doors). The leaf is not
equipped with hinge part.
NOTES
• Ventilation sleeves available in silver or golden colour – 1 row.
* Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
1 The relief board color may be chosen from the “select” veneer color sample range and has to be
specified while ordering.
2 Arbitrary selection of door leaf sizes for double doors. To double non-rebated doors must be
ordered active and passive door leaf.
3 „100“ size – third 3D adjustable hinge.
structure of relief board
profile of board panely
ADDITIONAL CHARGES (OPTION)
„100” size
extra charge for relief board in patterns from A and B group (for 1 pc.)
extra charge for relief board in patterns from C group (for 1 pc.)
extra charge for relief board in patterns from K group (for 1 pc.)
ventilation: sleeves, undercut
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
handle with escutcheon (page 144)
pattern K.0
pattern K.1
pattern K.3
71
NATURE CONCEPT

Nature CONCEPT is a door collection aimed at clients, for whom doors, beside the functionality associated with them,
also constitute an important decorative element. Natural veneers applied, fit in ideally wherever aesthetics play a leading role,
build the proper ambience, and exceptional climate that often determines our well being.
128
pattern D.0
72
pattern D.1
pattern E.0
pattern E.1
pattern F.0
pattern F.1
AVAILABLE COLORS
DOOR LEAF CONSTRUCTION
Select natural veneer
The leaf frame is made of coniferous timber dressing. The core is made of perforated
chipboard reinforced with an internal plywood frame. The frame, along with the core, are
covered, on both sides, with a high quality natural veneer. Depending on the model, the
leaves may be equipped with a relief board1 or tempered glass (glazing fixture).
Oak
Teak

Cherry
Rosewood
Wenge
Ebony
NEW
COLORS
White Oak
samples of colors
LEAF EDGE PROFILE
“K” type door leaf edge profile (rebated doors). Outside leaf rail veneered to match leaf
color.
FINISHING
American
Walnut
Classic
Walnut
Dark
Walnut
see pages 156-158
Door leaf is covered with select natural veneer, quality of which guarantees repeatability of
each pattern and uniform of dyeing process.
MODELS
DOOR LEAVES – CROSS-SECTIONS
Door leaf is available in version for sliding door without hinges and rebate and with
a groove for guiding element slot-milled in the bottom edge of the door leaf (included
in the system). Patterns D1, E1, F1 have an additional c-section metal rail on the leaf for
guiding.
ACCESSORIES – INCLUDED IN THE LEAF PRICE
•
•
•
•
Lock: for regular key, bathroom lock or for cylinder insert
Hardened mat pane
Preparation for shortening up to 60 mm (applies to patterns D.0, E.0, F.0 only)
Round flush handle (for sliding doors)
LEAF SIZES (PAGE 150, TABLE 1)
wooden construction - pine blockboard
rebated doors
wooden construction - pine blockboard
non-rebated doors
Single leaf: „60”, „70”, „80”, „90”, „100”
Double leaf: „120” ÷ „200” 2
RECOMMENDED DOOR FRAMES – TRIPLE-HINGED (FROM PAGE 124)
• MINIMAX door frame, fixed width: 100 mm
• Adjustable Porta SYSTEM door frame
• Adjustable PRESTIGE door frame
• Adjustable Porta SYSTEM ELEGANCE door frame3
The recommended natural veneer door frames come equipped with set of three „PRIME”
pintle hinges (rebated doors) or two 3D adjustable (non-rebated doors). The leaf is not
equipped with hinge part.
NOTES
• Ventilation sleeves available in silver or golden colour – 1 row.
• Ventilation undercut available in patterns D.0, E.0, F.0 only.
* Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
1 The relief board color may be chosen from the “select” veneer color sample range and has to be
specified while ordering.
2 Arbitrary selection of door leaf sizes for double doors. To double non-rebated doors must be
ordered active and passive door leaf.
3 „100“ size – third 3D adjustable hinge.
structure of relief board
ADDITIONAL CHARGES (OPTION)
„100” size
ventilation: sleeves, undercut
hook lock with side handles (for sliding doors)
oblong handle (for sliding doors)
handle with escutcheon (page 146)
73
ALPHA folding doors
BETA folding doors
SLIDING DOOR systems
FOLDING doors,
SLIDING doors
ORTA doors – that does not mean traditional side-hung doors
only. In their concepts the designers often seek atypical solutions
matching the function and purpose of the rooms. At the same time they
strive to ensure consistent selection of materials used for manufacture of
particular designed interior furniture elements.
P
Any sliding or folding systems ideally fit where side-hung doors cannot
be installed because of limited space or the interior concept plan.
Wishing to meet the customers’ expectations, PORTA offers all these
system solutions in a wide colour range of available coatings.
PORTA sliding door system
ALU sliding door system
COMPACT sliding door system
OXFORD, GENEVA folding doors
ALPHA folding doors
BETA folding doors
OMEGA double-leaf sliding doors
Enjoy the quality!
new collection!
new collection!
new collection!
PORTA sliding door system
wall system for sliding doors (without a door leaf)
There are places where the side-hung doors cannot be used because of reduced area
or the concept of interior plan. In such situations we offer a system of sliding doors
based on Porta SYSTEM door frame (all colors available) including the sliding system,
shield and fender beam. A complete wall-mounted set should include:
• wall system
• ”tunnel”type door frame
• sliding type door leaf
ALU sliding door system
wall system for sliding doors (without a door leaf)
ALU SYSTEM is another offer of sliding system, characterized by high workmanship
esthetics. It is a perfect solution for modern interiors. Suspension made of aluminum
gives this system an impression of modernity and structure lightness.
A complete wall-mounted set should include:
• wall system
• ”tunnel” type door frame
• sliding type door leaf.
76
AVAILABLE COLORS
Portadecor veneer
CONSTRUCTION
The system contains a rail with trolleys, shields and fender beam. The shield and fender
beam are made of chipboard and MDF. All visible elements are veneered in the same
colours range as Porta SYSTEM door frame.

FINISHING
White
Grey
Euroinvest
Beech
Bavaria
Oak*
Cherry tree
Walnut
NEW
COLORS
Wenge
Light Oak
Portacortex veneer
Walnut
Verona1
Walnut
Verona2

Bark 2
Super Matt veneer
Bark 3
SET SIZES (PAGE 153, TABLE 7)
Bark 4
NOTES

• Set should be installed only after the interior works are finished (e.g. wall paper and parquet are
in place).
• Set is available as universal design. The direction can be changed through the beam turn to the
left or right side of the tunnel Porta SYSTEM.
White
• Porta SYSTEM in version ”tunnel” means door frame without hinges and lock fastening, and
Portadur veneer
PVC veneer
Light beech
without proper holes.

Walnut 3
Walnut 4
Walnut 5
Walnut 6
Apple tree
Golden
Oak
Oak

Alder
HQ CPL veneer
Walnut

White
Grey
Euroinvest
Beech Porta
Mahogany
Walnut
Oak
Milano 1
Oak
Milano 2
Oak
Milano 3
Oak
Milano 4
Oak
Milano 5
CONSTRUCTION
NEW
COLORS
White
Walnut
Rail with trolleys
Striker
Self-adhesive brush seal
Floor-mounted component, guiding and stabilizing door leaf in vertical direction
Single door. To the following leaf width: „60”, „70”, „80”, „90”, „100”
NEW
COLORS
Walnut 2
ACCESSORIES – INCLUDED IN THE SET PRICE
•
•
•
•
Walnut
Verona3
NEW
COLORS
Bark 1
The following veneers are used: Portadecor, Portacortex, Super Matt, Portadur, PVC,
HQ CPL and natural veneers. The veneer colors match the standard door leaf colors offered
by Porta KMI Poland.
Walnut
Modena 1
Offered system consists of a guide and a section supporting the door leaf. Both components
are made of aluminum.
Walnut
Modena 1
Standard natural veneer
FINISHING
Porta SYSTEM door frames in ‘tunnel’ version are coated with the following veneers:
Portadecor, Portacortex, Super Matt, Portadur, PVC, HQ CPL and natural veneers.
The veneer colors match the standard door leaf colors offered by Porta KMI Poland.

Oak 1
Oak 2
Oak 3
Oak 4
Oak 5
Oak 6
Limba 1
Limba 2
Limba 3
Limba 4
Limba 6
Maple 1
ACCESSORIES – INCLUDED IN THE SET PRICE
• Rail with trolleys
• Door leaf support section
• Floor-mounted component, guiding and stabilizing door leaf in vertical direction
SET SIZES (PAGE 153, TABLE 7)
Single door. To the passage diameter with the following width: „60”, „70”, „80”, „90”.
Double doors. To the passage diameter with the following width: ,,130”, ,,150”, ,,170” 1
Sapelli 3
Sapelli 4
Select natural veneer
Sapelli 6

NOTES
• Set should be installed only after the interior works are finished (e.g. wall paper and parquet are
in place).
Oak
Teak
Cherry
Rosewood
Wenge
Ebony
• Set can be used with any door leaf direction and protrusion.
• Porta SYSTEM in version ”tunnel” means door frame without hinges and lock fastening, and
* till stock-out
White Oak
samples of colors
*
American
Walnut
see pages 156-158
without proper holes.
Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
1 In order to select system for ‘tunnel’ type door frame properly, select door leafs larger by
a single size from the passage diameter, e.g.: for system and ‘tunnel’ in size „70”–> leaf set „80”,
for „80”–>„90”, for „150”–>2 x „80”, for „170”–>2 x „90” etc.
77
COMPACT sliding door system
system for sliding doors (without a door leaf) – for mounting in the wall
(door frame+metal casing)
Sliding door system designed to be installed in the wall is an elegant solution which
ensures maximum floor space of the room. An invisible construction incorporated in
the gypsum wall allows the doors to be installed wherever side-hung doors do not
meet the interior design concept or simply cannot be fitted.
A complete set includes the following:
• construction casing
• door frame
• door leaf (in „sliding” version)
78
AVAILABLE COLORS
Portadecor veneer
CONSTRUCTION
The system comprises a casing to be fitted in the wall complete with wheel hangers, rails
and door frame made of chipboard and MDF board clad with veneers in colors offered by
Porta SYSTEM.

FINISHING
White
Grey
Euroinvest
Beech
Bavaria
Oak*
Cherry tree
Walnut
NEW
COLORS
Wenge
Light Oak
Portacortex veneer
Walnut
Verona1
Walnut
Verona2
•
•
•
•
•
•

Bark 2
Super Matt veneer
ACCESSORIES – INCLUDED IN THE SET PRICE
Walnut
Verona3
NEW
COLORS
Bark 1
Porta SYSTEM door frames in ‘tunnel’ version are coated with the following veneers:
Portadecor, Portacortex, Super Matt, Portadur, PVC, HQ CPL and natural veneers.
The veneer colors match the standard door leaf colors offered by Porta KMI Poland.
Bark 3
SET SIZES (PAGE 153, TABLE 7)
Single doors*: „60”, „70”, „80”, „90”, „100”
Double doors*: „120” ÷ „200”
Bark 4

NEW
COLORS
NOTES
• The system is designed for gypsum board walls 125 mm wide.
• Door frame and leaf should be installed only after the interior works are finished (e.g. wall paper
and parquet are in place).
* Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
White
Portadur veneer
Walnut 2
PVC veneer
Light beech
Construction casing
Rail with wheel hangers
Lock strike
Anti-dust brush seal
Floor-mounted component, guiding and stabilizing door leaf in vertical direction
Door frame

Walnut 3
Walnut 4
Walnut 5
Walnut 6
Apple tree
Golden Oak
Oak

Alder
Walnut

HQ CPL veneer
NEW
COLORS
White
Grey
Grey
Euroinvest
Euroinvest
Beech
Beech Porta
Porta
Mahogany
Mahogany
Walnut
Walnut
Oak
Oak
Milano
Milano 1
1
Oak
Oak
Milano
Milano 2
2
Oak
Oak
Milano
Milano 3
3
Oak
Oak
Milano 4
4
Milano
Oak
Oak
Milano 5
5
Milano
White Walnut
NEW
COLORS
White
Walnut
Walnut
Modena 1
Walnut
Modena 1
Standard natural veneer

Oak 1
Oak 2
Oak 3
Oak 4
Oak 5
Oak 6
Limba 1
Limba 2
Limba 3
Limba 4
Limba 6
Maple 1
Sapelli 3
Sapelli 4
Sapelli 6
Rosewood
Wenge
Ebony
Select natural veneer
Oak
Teak
White Oak
American
Walnut

Cherry
* till stock-out
samples of colors
see pages 156-158
ADDITIONAL CHARGES (OPTION)
synchronization door closure (in double doors)
79
OXFORD, GENEVA

The embossed design and finishes of OXFORD and GENEVA dressing room doors are inspired by LONDON and
VIENNA range for which they are a perfect supplement. These models are used most often for recessed lockers.
80
OXFORD
OXFORD
GENEWA
GENEWA
(double-element)
(quadruple-element)
(double-element)
(quadruple-element)
DOOR LEAF CONSTRUCTION
Acrylic paint (interior)
The door leaf is filled with stabilizing inserts and covered from both sides with embossed
HDF boards.
LEAF EDGE PROFILE
Both side edges and the upper edge of the leaf covered with leaf-colored skirting tape.
White
(RAL9016)
FINISHING
The leaf is double coated with acrylic water paint or veneered with PVC woodlike venner
(OXFORD only).
PVC veneer 
MODELS
Light beech
samples of colors
Alder
Apple tree
Golden Oak
see pages 156-158
• OXFORD (PVC veneer or varnished)
• GENEVA (only varnished)
Double doors: full
Quadruple doors: full
ACCESSORIES – INCLUDED IN THE LEAF PRICE
DOOR LEAVES – CROSS-SECTIONS
• Folding mechanism
• Hinges
• Varnished wooden handle
LEAF SIZES (PAGE 152, TABLE 5)
Double doors: „60“, „70“, „80“, „90“
Quadruple doors: „120“, „140“, „160“, „180“
DOOR FRAMES
stabilizing inserts
• MDF door frame of constant breadth 70 mm, veneered with Portadecor veneer (white
color) or PVC woodlike veneer.
NOTES
• Possibility to short the door (in the bottom and higher part) up to 30 mm.
„wood grain” surface structure
ADDITIONAL CHARGES (OPTION)
masking architraves
(page 147)
81
ALPHA folding doors
NOVELTY
door leaf + door frame + leading system
ALPHA – rebated two-element asymmetrical door with a typical lock in the leaf and
door frame strike. Folding doors represent a structural concept which perfectly fits
in the small area spaces. The folding systems allow to reduce the area needed for
correct door operation to a minimum. They are widely used in all kinds of recessed
wardrobes and wherever communication difficulties may arise due to limited space.
A complete set includes the following:
• leading system
• two-element leaf
• Porta SYSTEM door frame (modified)
BETA folding doors
door leaf + door frame + leading system
BETA – traditional non-rebated two-element symmetrical lockless door.
Folding doors represent a structural concept which perfectly fits in the small area
spaces. The folding systems allow to reduce the area needed for correct door
operation to a minimum. They are widely used in all kinds of recessed wardrobes
and wherever communication difficulties may arise due to limited space.
A complete set includes the following:
• leading system
• two-element leaf
• Porta SYSTEM door frame (modified)
82
NOVELTY
AVAILABLE COLORS
CONSTRUCTION
Acrylic paint (interior)
The leaf core is made of stabilizing honeycomb or or perforated chipboard reinforced with
inner frame made of plywood (option at an extra charge)1. The frame and the core are
covered with HDF board on both sides.

LEAF EDGE PROFILE
„K“ profile. For doors veneered with CPL HQ both side edges and the upper edge of the leaf
covered with 1 mm thick ABS tape of the same color as the door.
White
(RAL9016)
Portadecor veneer
White

Grey
Euroinvest
FINISHING
Beech
Bavaria
Oak*
Cherry tree
Walnut
MODELS
NEW
COLORS
Wenge
Light Oak
Walnut
Verona2
Walnut
Verona1
Walnut 2
PVC veneer

Walnut 3
Walnut 4
Walnut 5
Two-element, full.
ACCESSORIES – INCLUDED IN THE LEAF PRICE
•
•
•
•
•
•
Walnut
Verona3
* till stock-out
Portadur veneer
The doors may be coated with ecologically safe new generation water-based varnish or
veneers: Portadecor, Portadur (vertical design of wood grains), PVC, HQ CPL and natural
veneers (vertical design of wood grains).
Leading mechanism
Seal
Three hidden hinges*
Round handle (BETA)
Lock: regular key lock, bathroom lock or cylinder insert lock (ALPHA)
Lock strike (ALPHA)
LEAF SIZES (PAGE 153, TABLE 7)
Walnut 6
Two-element leaf*: „60”, „70”, „80”, „90”, „100”2

RECOMMENDED DOOR FRAMES (PAGE 126)
• Modified Porta SYSTEM door frame – B to K width range.
Light beech
Alder
HQ CPL veneer
White
Oak
Milano 1
Apple tree
Golden Oak
Oak
Walnut
NOTES

*
Grey
Euroinvest
Beech Porta
Oak
Milano 2
Oak
Milano 3
Mahogany
Walnut
Oak
Milano 4
Oak
Milano 5
1
2
Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
Perforated chipboard core is a standard in the natural veneered doors.
„100” size niedostępny w systemie BETA.
NEW
COLORS
White
Walnut
Walnut
Modena 1
Walnut
Modena 1
Standard natural veneer

Oak 1
Oak 2
Oak 3
Oak 4
Oak 5
Oak 6
Limba 1
Limba 2
Limba 3
Limba 4
Limba 6
Maple 1
Sapelli 3
Sapelli 4
Sapelli 6
Rosewood
Wenge
Ebony
Select natural veneer
Oak
Teak
White Oak
American
Walnut
samples of colors

Cherry
see pages 156-158
DOOR LEAVES – CROSS-SECTIONS
„honeycomb” stabilizing
perforated chipboard
ADDITIONAL CHARGES (OPTION)
„100” size (ALPHA only)
„honeycomb” stabilizing
ventilation: sleeves, undercut
handle with escutcheon (page 144)
83
OMEGA double-leaf sliding doors
door leaf + door frame + leading system
OMEGA sliding door system is a solution for any recessed wardrobes and walk-in closets. Wide selection of veneer
types and colors allows to adjust the product to any interior arrangement and to other doors offered by PORTA.
A complete set includes the following:
• leading system
• two door leaves
• Porta SYSTEM door frame (modified version of “tunnel” type)
NOVELTY
84
AVAILABLE COLORS
CONSTRUCTION
Acrylic paint (interior)
Stabilizing core with HDF panel on both sides.
Leaf thickness: 30 mm.

LEAF EDGE PROFILE
„K” profile. For doors veneered with CPL HQ both side edges and the upper edge of the leaf
covered with 1 mm thick ABS tape of the same color as the door.
White
(RAL9016)
Portadecor veneer
White
FINISHING

Grey
Euroinvest
The doors may be coated with ecologically safe new generation water-based varnish or
veneers: Portadecor, Portadur (vertical or vertical-horizontal design of wood grain), PVC,
HQ CPL and natural veneers (vertical design of wood grain).
Beech
Bavaria
Oak*
Cherry tree
Walnut
NEW
COLORS
Wenge
Light Oak
Walnut
Verona2
Walnut
Verona1
Walnut
Verona3
MODELS
Double leaf, symmetrical, non-rebated, full.
ACCESSORIES – INCLUDED IN THE LEAF PRICE
• Leading mechanism
• Round handle
LEAF SIZES (PAGE 153, TABLE 7)
* till stock-out
Portadur veneer
Double leaf symmetrical*: „120“, „140“, „160“, „180“, „200“, „220“1

RECOMMENDED DOOR FRAMES (PAGE 126)
• Modified Porta SYSTEM door frame of tunnel type – A to K width range.
Walnut 2
PVC veneer
Walnut 3
Walnut 4
Walnut 5
Walnut 6

NOTES
*
Light beech
Alder
HQ CPL veneer
Apple tree
Golden
Oak
Oak
Walnut
1

White
Grey
Euroinvest
Beech Porta
Mahogany
Walnut
Oak
Milano 1
Oak
Milano 2
Oak
Milano 3
Oak
Milano 4
Oak
Milano 5
Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
Size „200” and „220” in Portadur veneer available only in vertical wood grains.
NEW
COLORS
White
Walnut
Walnut
Modena 1
Walnut
Modena 1
Standard natural veneer

Oak 1
Oak 2
Oak 3
Oak 4
Oak 5
Oak 6
Limba 1
Limba 2
Limba 3
Limba 4
Limba 6
Maple 1
Sapelli 3
Sapelli 4
Sapelli 6
Rosewood
Wenge
Ebony
Select natural veneer
Oak
Teak
White Oak
American
Walnut
samples of colors

Cherry
see pages 156-158
DOOR LEAVES – CROSS-SECTIONS
stabilizing core with HDF panel on both sides
ADDITIONAL CHARGES (OPTION)
„100”, „110” size
longitudinal metal side handles (pc.)
85
GRANITE door with PROJECT door frame
INTERIOR ENTRANCE
doors
veryone needs a feeling of security – particularly at home. Solid
entrance doors, which protect our apartment against unbidden
guests, are an important position in the Porta KMI Poland offer.
E
We offer four types of entrance doors: AGATE, OPAL, QUARTZ and
GRANITE. Technical parameters of each of the above mentioned door
type differ, though, generally, they meet all specifi cations of the
entrance doors. This has been confi rmed by the appropriate Technical
Approvals as well as practical and carefree use of the hundred thousand
of the fabricated doors of this type.
An important feature of Porta entrance doors consists in that they are
offered as a set comprising a leaf with an adjusted metal door frame
complete with 2nd or 3nd European norm ENV or “C” class furniture.
AGATE
OPAL
QUARTZ
GRANITE
GRANITE PS
Enjoy the quality!
new colors!
new colors!
new colors!
new colors!
new solutions!
AGATE Plus, OPAL Plus

The use of sheet aluminum for door construction has allowed an exceptional resistance of AGATE and OPAL doors for adverse impact
of specific service conditions specific for the staircase such as temperature and humidity fluctuations. OPAL doors are characterized by
acoustic insulation 33 dB and 2nd class burglary protection properties according to the European ENV standard – provided that they are
installed in a special PORTA metal frame, with a stainless steel threshold, 2nd ENV class handle with escutcheon and a patented lock
cylinder of at least 4th ENV class.
(door leaf + door frame + metal threshold)
flat
88
pattern 2
pattern 3
pattern 4
pattern 6
pattern 7
pattern 8
pattern 9
AVAILABLE COLORS
PVC veneer
DOOR LEAF CONSTRUCTION
The door leaf consists of a finger jointed softwood frame filled with reinforced perforated
chipboard, and covered from both sides with composite boards of aluminum and HDF

LEAF EDGE PROFILE
Light beech
Alder
Apple tree
Oak
Walnut
White
„wood grains”
HQ CPL veneer
Both side edges and higher part are covered with skirting tape in the color of the door leaf.
For doors veneered with CPL HQ both side edges and the upper edge of the leaf covered
with 1 mm thick ABS tape of the same color as the door.
The leaf itself is made in the rebate version.
Golden Oak
FINISHING
The leaf is veneered with HQ CPL laminate 0.2 or 0.7 mm thick, natural veneer (flush door
leaves only) or PVC veneer (flush and slot-milled).

MODELS
White
Grey
Euroinvest
Beech Porta
Mahogany
Single leaf: flush, slot-milled or with strips. Strips may be ordered for both sides or for any
side of the door leaf.
Walnut
ACCESSORIES – INCLUDED IN THE LEAF PRICE (AGATE PLUS)
Oak
Milano 1
Oak
Milano 2
Oak
Milano 3
Oak
Milano 4
•
•
•
•
Oak
Milano 5
NEW
COLORS
White
Walnut
Walnut
Modena 1
ACCESSORIES – INCLUDED IN THE LEAF PRICE (OPAL PLUS)
•
•
•
•
•
Walnut
Modena 1
Standard natural veneer
One or two locks with rectangular dead bolt for cylinder insert
Three pintle hinges
Eye-viewer in silver color
Door frame equipped with threshold made of stainless steel (90 mm)

4-point lock for 2 cylinder insert
Three pintle hinges*
Three anti-lever security bolts
Silver eye-viewer
Door frame equipped with threshold made of stainless steel (90 mm)
LEAF SIZES (PAGE 151, TABLE 3)
Oak 1
Oak 2
Oak 3
Oak 4
Oak 5
Oak 6
„80”, „90” „100”*
RECOMMENDED DOOR FRAME
Limba 1
Limba 2
Sapelli 3
Sapelli 4
Satin natural veneer
Limba 3
Limba 4
Limba 6
• Angle-bar metal door frame is made of profile 100 mm wide and made of steel. Coated
on both sides with 1.2 mm (AGATE) or 1.5 mm (OPAL) thick zinc layer. Is equipped with:
3 pintle hinges, circumferential rubber gasket, six assembly dowels (OPAL only). The
frame is covered with powder paint in one out of standard colors: white (RAL 9016),
grey (RAL 7047), cream (RAL 1001), brown (RAL 8028).
• Door frame is available in two versions:
– for setting in the ready floor – level “0”
– for cementing in the floor – level “30”
• PROJECT door frame (page 142)
Maple 1
Sapelli 6

NEW
COLORS
Bianco
Tabacco
Select natural veneer
Oak
Teak
Mocca
Nero
NOTES
• Preparation for shortening (by 60 mm max.)
• Acoustic insulation class Rw = 32 dB (range 32 ÷ 36 dB).
* Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.

Cherry
Rosewood
Wenge
Ebony
NEW
COLORS
White Oak
samples of colors
American
Walnut
Classic
Walnut
Dark
Walnut
see pages 156-158
strip profiles patterns 1 and 2
DOOR LEAVES – CROSS-SECTIONS
perforated chipboard + aluminium board
strip profiles and panel patterns – strip 3 and strip 4
ADDITIONAL CHARGES (OPTION)
„100” size
cylinder insert
handle with escutcheon, upper lock board
finishing with satin natural veneer
* strip 1 (for 1 side – price for two sides x 2)
* strip 2 (for 1 side – price for two sides x 2)
* strip 3 (for 1 side – price for two sides x 2)
* strip 4 (for 1 side – price for two sides x 2)
installation dowels (AGATE door frame – 6 pcs)
the frame section from 80 to 100 mm – free of charge
expanding the frame section from 101 to 150 mm
expanding the frame section from 151 to 270 mm
expanding the frame section from 271 to 390 mm
strip 1*
strip 2*
strip 3 *
with panel
* designs available only with standard natural oak and limba veneers
strip 4 *
with panel
89
QUARTZ

The multi-layer construction of the QUARTZ door leaf ensures 30 minute fire resistance, smoke-tightness of Sa, Sm class and 34 dB
sound insulation. The sheet aluminum inserted in the leaf construction makes the door exceptionally resistant to adverse service
conditions on the staircase.
(door leaf + door frame + metal threshold)
flat
90
pattern 2
pattern 3
pattern 4
pattern 6
pattern 7
pattern 8
pattern 9
AVAILABLE COLORS
PVC veneer
DOOR LEAF CONSTRUCTION
The door leaf consists of a finger jointed softwood frame filled with multilayer fire resistant
chipboard core and covered from both sides with composite boards of aluminium and
HDF.

LEAF EDGE PROFILE
Light beech
Alder
Apple tree
Oak
Walnut
White „wood
grains”
HQ CPL veneer
Both side edges and higher part are covered with skirting tape in the color of the door leaf.
For doors veneered with CPL HQ both side edges and the upper edge of the leaf covered
with 1 mm thick ABS tape of the same color as the door. The leaf itself is made in the rebate
version.
Golden Oak
FINISHING

The leaf is veneered with HQ CPL laminate 0.7 mm thick, natural veneer (flat door leaves
only) or PVC veneer (flat and slot-milled).
MODELS
White
Grey
Euroinvest
Beech Porta
Mahogany
Walnut
Oak
Milano 1
Oak
Milano 2
Oak
Milano 3
Oak
Milano 4
Oak
Milano 5
Single leaf: flat, slot-milled or with strips. Three types (type I; II and III), depending on the
complexity of the lock structure. Strips may be ordered for both sides or for any side of the
door leaf.
ACCESSORIES – INCLUDED IN THE LEAF PRICE
• Rectangular bolt lock for a patented cylinder (QUARTZ type I)
• Two mortise locks with rectangular bolts, for a patented cylinder (QUARTZ type II)
• 4-point mortise lock for two patented cylinders and three anti-leverage security bolts
(QUARTZ type III)
• Three reinforced, silver pintle hinges*
• Wide-angle, silver eye-viewer (optional)
• Thermo-swelling seal in the leaf grove
• Door frame with a standard, stainless steel threshold (90 mm)
NEW
COLORS
White
Walnut
Walnut
Modena 1
Walnut
Modena 1
Standard natural veneer

LEAF SIZES (PAGE 151, TABLE 3)
Oak 1
Oak 2
Oak 3
Oak 4
Oak 5
„80”, „90”, „100”*
Oak 6
DOOR FRAME
Limba 1
Limba 2
Sapelli 3
Sapelli 4
Satin natural veneer
Limba 3
Limba 4
Limba 6
• Angle-bar metal door frame is made of profile 100 mm wide. Is made of steel, coated on
both sides with 1.5 mm thick zinc layer. The frame is covered with powder paint in one out
of standard colors: white (RAL 9016), grey (RAL 7047), cream (RAL 1001), brown (RAL 8028).
It is equipped with: 3 pintle hinges standard, circumferential thermoswelling seal,
threshold made of stainless steel (90 mm) and a bracket for the automatic closing
mechanism. Moreover the frame is provided with: QUARTZ I striker for one lock;
QUARTZ II striker for two locks; QUARTZ III striker for four point strip lock, 6 dowels and
holes for anti-unhinging bolts.
• Door frame is available in two versions:
– for setting in the ready floor – level “0”
– for cementing in the floor – level “-30”
• PROJECT door frame (page 142)
Maple 1
Sapelli 6

NEW
COLORS
Bianco
Tabacco
Select natural veneer
Oak
Teak
Mocca
Nero

Cherry
NOTES
Rosewood
Wenge
• Preparation for shortening (by 60 mm max.).
• To meet the Technical Approval requirements, QUARTZ doors need to be equipped with
a self-closing device.
• Acoustic insulation class Rw = 32 dB (range 32 ÷ 36 dB).
* Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
Ebony
NEW
COLORS
White Oak
samples of colors
American
Walnut
Classic
Walnut
Dark
Walnut
see pages 156-158
DOOR LEAVES – CROSS-SECTIONS
strip profiles patterns 1 and 2
fire-resistant perforated chipboard + aluminium board
strip profiles and panel patterns – strip 3 and strip 4
ADDITIONAL CHARGES (OPTION)
„100” size
cylinder insert
handle with escutcheon, upper lock board (page 146)
finishing with satin natural veneer
* strip 1 (for 1 side – price for two sides x 2)
* strip 2 (for 1 side – price for two sides x 2)
* strip 3 (for 1 side – price for two sides x 2)
* strip 4 (for 1 side – price for two sides x 2)
the frame section from 80 to 100 mm – free of charge
expanding the frame section from 101 to 150 mm
expanding the frame section from 151 to 270 mm
expanding the frame section from 271 to 390 mm
strip 1*
strip 2*
strip 3 *
with panel
* designs available only with standard natural oak and limba veneers
strip 4 *
with panel
91
GRANITE

We offer two types of Granite doors:
Type I with burglary resistance of class “C” and 3 class according to ENV 1627, acoustic insulating power 36 dB and smoke-ightness – safety guarantee,
protection against noise and the worst fire effect such as carbon monoxide poisoning.
Type II has all features of type I plus 30 min fire resistance (EI 30) and S 60 smoke-tightness – additional full guarantee of protection against the fire effects.
This is an offer addressed to the most demanding persons for whom the safety based on the highest quality materials and workmanship is the most
important.
Non-typical project depicted in the photo (Porta CONTRACT).
(door leaf + door frame+ handle with escutcheon + cylinder insert)
flat
92
pattern 2
pattern 3
pattern 4
pattern 6
pattern 7
pattern 8
pattern 9
AVAILABLE COLORS
PVC veneer
DOOR LEAF CONSTRUCTION
The door leaf consists of a finger jointed softwood frame filled with special construction Porta
with inner steel bars, covered from both sides with composite boards of aluminium and HDF.

LEAF EDGE PROFILE
Light beech
Alder
Apple tree
Oak
Walnut
White „wood
grains”
HQ CPL veneer
Both side edges and higher part are covered with skirting tape in the color of the door leaf. For
doors veneered with CPL HQ both side edges and the upper edge of the leaf covered with 1 mm
thick ABS tape of the same color as the door.
The leaf itself is made in the rebate version.
Golden Oak
FINISHING
The leaf is veneered with HQ CPL laminate 0.7 mm thick, natural veneer (flush door leaves only)
or PVC veneer (flush and slot-milled).

MODELS
White
Grey
Euroinvest
Beech Porta
Mahogany
Single leaf: flat, slot-milled or with strips. Strips may be ordered for both sides or for any side
of the door leaf.
Walnut
ACCESSORIES – INCLUDED IN THE LEAF PRICE
Oak
Milano 1
Oak
Milano 2
Oak
Milano 3
Oak
Milano 4
•
•
•
•
•
•
•
•
•
•
Multi-bolt mortise lock
Two anti-burglary „C”-class cylinders
Handle with anti-burglary escutcheon
Upper escutcheon
Three reinforced, silver pintle hinges*
Four anti-leverage security bolts
Silver eye-viewer (optional)
The lock, cylinder and escutcheon used are „C”-class certified
The leaf may be shortened by 60 mm maximum
Additionally: type II – thermo-swelling seal on side and upper edges (except for the lower
edge)
• Door frame is equipped with a wider type of a stainless steel threshold (120 mm).
Oak
Milano 5
NEW
COLORS
White
Walnut
Walnut
Modena 1
Walnut
Modena 1
Standard natural veneer
Oak 1
Oak 2

Oak 3
Oak 4
Oak 5
LEAF SIZES (PAGE 151, TABLE 3)
Oak 6
„80”, „90”, „100”*
DOOR FRAME
Limba 1
Limba 2
Sapelli 3
Sapelli 4
Satin natural veneer
Limba 3
Limba 4
Limba 6
Maple 1
• Angle-bar metal door frame is made of profile 100 mm wide. Is made of steel, coated on both
sides with 1.5 mm thick zinc layer and equipped with: fire-proof gasket, 8 dowels, threshold
made of stainless steel (120 mm). The frame is covered with powder paint in one out of
standard colors: white (RAL 9016), grey (RAL 7047), cream (RAL 1001), brown (RAL 8028).
• Door frame is available in two versions:
– for setting in the ready floor – level “0”
– for cementing in the floor – level “-30”.
• PROJECT door frame (page 142)
Sapelli 6

NEW
COLORS
Bianco
Tabacco
Select natural veneer
Oak
Teak
Mocca
Nero
NOTES
• To meet the Technical Approval requirements, 30-minute fire retardant doors need to be equipped
with a self-closing device.
• Acoustic insulation class Rw = 32 dB (range 32 ÷ 36 dB).
* Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.

Cherry
Rosewood
Wenge
Ebony
NEW
COLORS
White Oak
samples of colors
American
Walnut
Classic
Walnut
Dark
Walnut
see pages 156-158
strip profiles patterns 1 and 2
DOOR LEAVES – CROSS-SECTIONS
perforated chipboard + steel bars + aluminium board
strip profiles and panel patterns – strip 3 and strip 4
ADDITIONAL CHARGES (OPTION)
„100” size
finishing with satin natural veneer
* strip 1 (for 1 side – price for two sides x 2)
* strip 2 (for 1 side – price for two sides x 2)
* strip 3 (for 1 side – price for two sides x 2)
* strip 4 (for 1 side – price for two sides x 2)
expanding the frame section from 101 to 150 mm
expanding the frame section from 151 to 270 mm
expanding the frame section from 271 to 390 mm
strip 1*
strip 2*
strip 3 *
with panel
* designs available only with standard natural oak and limba veneers
strip 4 *
with panel
93
GRANIT PS with adjustable door frame

We offer two types of GRANITE PS doors:
Type I with burglary resistance rated 3 according to ENV 1627, acoustic insulating power Rw 32 dB and smoke-tightness – safety guarantee, protection
against noise and the worst fire effect such as carbon monoxide poisoning
Type II has all features of type I plus 30 min fire resistance (EI 30) and S 60 smoke-tightness – additional full guarantee of protection against the fire
effects.
This is an offer addressed to the most demanding persons for whom the safety based on the highest quality materials and workmanship is the most
important.
Hinge pocket
lock strike
Strip profile (against extra charge)
anchor bolts
(door leaf + door frame+ handle with escutcheon + cylinder inserts)
flat
94
pattern 2
pattern 3
pattern 4
pattern 6
pattern 7
pattern 8
pattern 9
AVAILABLE COLORS
PVC veneer
DOOR LEAF DESIGN
The door frame is made of coniferous glulam. The leaf core is of special Porta construction
based on chipboard. The sheathing is made of special two-layer board of aluminium sheet
and HDF.

LEAF EDGE PROFILE
Light beech
Alder
Oak
Walnut
HQ CPL veneer
Apple tree
The door leaf is in rebated version.
Both sides and the top of leaf are covered with skirting tape of the same colour. For doors
veneered with HQ CPL both sides and the top of leaf are covered with 1 mm thick ABS tape
of the same colour as the door.
Golden Oak
FINISHING

The door leaf is veneered with 0.7 mm HQ CPL (only flat door leaves) and PVC veneer (both
flat and slot-milled door leaves).
MODELS
White
Grey
Euroinvest
Oak
Milano 1
Oak
Milano 2
Beech Porta
Mahogany
Single leaf, flat doors – milled or with strips.
Strips may be ordered for both sides or for any side of the door leaf.
Walnut
ACCESSORIES INCLUDED IN THE LEAF PRICE
Oak
Milano 3
Oak
Milano 4
•
•
•
•
•
•
•
•
•
Multi-bolt strip lock
2 x Class 5 anti-burglary inserts
Handle with anti-burglary escutcheon
Upper escutcheon
Two opening hinges (silver colour)*
Four ant-leverage security bolts.
Eye-viewer - silver colour (option)
The leaf may be shortened by 50 mm maximum
Additionally: type II – thermo-swelling seal on side and upper edges (except of the
bottom edge)
• Door frame is equipped with a stainless steel threshold 100 mm wide
Oak
Milano 5
NEW
COLORS
White
Walnut
Walnut
Modena 1
Walnut
Modena 1
Standard natural veneer
Oak 1
Oak 2

Oak 3
Oak 4
Oak 5
LEAF SIZES (PAGE 151, TABLE 3)
Oak 6
„80”, „90”, „100”*
DOOR FRAME
Limba 1
Limba 2
Sapelli 3
Sapelli 4
Satin natural veneer
Limba 3
Limba 4
Limba 6
Maple 1
•
NOTES
Sapelli 6
• To meet the polish law requirements, doors with fire resistance and smoke-tightness need to be
equipped with self-closing device.
• Acoustic insulation class Rw=32 dB
* Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.

NEW
COLORS
Bianco
Tabacco
Select natural veneer
Oak
Adjustable reinforced Porta SYSTEM door frame
Mocca
Nero

Teak
Cherry
Rosewood
Wenge
Ebony
NEW
COLORS
White Oak
samples of colors
American
Walnut
Classic
Walnut
strip profiles patterns 1 and 2
Dark
Walnut
see pages 156-158
DOOR LEAVES – CROSS-SECTIONS
1
2
3
4
strip profiles and panel patterns – strip 3 and strip 4
5
1 – decorative veneer
2 – HDF panel
3 – Aluminium insulation plate
4- chipboards fitted in layers.
5 – coniferous glulam
ADDITIONAL CHARGES (OPTION)
„100” size
* strip 1 (for 1 side – price for two sides x 2)
* strip 2 (for 1 side – price for two sides x 2)
* strip 3 (for 1 side – price for two sides x 2)
* strip 4 (for 1 side – price for two sides x 2)
strip 1*
strip 2*
strip 3 *
with panel
* designs available only with standard natural oak and limba veneers
strip 4 *
with panel
95
WROCLAW doors
EXTERIOR
doors
he offer of internal doors and interior entrance doors is supplemente
with our exterior door range. The exterior doors may be installed
outside the building and are resistant to weather conditions. However,
long-term and carefree operation of the external doors is strongly
affected by their proper installation, i.e. in compliance with the location
and assembly instruction.
D
The assembly method which eliminates the exposure of the doors to
rainfall and sun is of extreme importance. Therefore, an appropriate
protection in the form of a canopy roof over the door is important to
considerably extend the carefree service of the door.
We offer three groups of external doors: doors made of metal sheet
drawpieces (Gdansk, Szczecin, TORUN and ROMA Premium models) and
wooden frame doors (GDYNIA, WROCLAW model).
It should be emphasized that we offer all types of external doors with
glazing, and in the case of GDYNIA doors we offer a wide range of
sidelights and toplights.
ROMA
WROCLAW
GDYNIA
Transoms for GDYNIA
Enjoy the quality!
new models!
Thermally insulated ROMA doors

Thermally insulated ROMA doors are manufactured in two versions:
STANDARD version for flat entrance doors in the apartment buildings. The doors consist of a leaf filled with three-layer thermally
insulating material and metal door frame made of zinc-coated steel sheet. PREMIUM version is used in particular for entrance doors
in single family houses. The door leaf is filled with a five-layer thermally insulating core which provides protection against frost
penetration. We are the only door Manufacturer in Poland to use metal/wooden door frame eliminating thermal bridges. In both
versions the door leaf casing and the frame are made of zinc-coated steel sheet coated with decorative PVC laminate to meet the
aesthetical requirements of the most demanding customers and to guarantee long-term service of the doors.
NE W MODEL S
NOWOŚĆ
(door leaf + door frame)
full
pattern 1
pattern 2
pattern 3
pattern 4
double doors
(sample)
98
AVAILABLE COLORS
DOOR LEAF CONSTRUCTION
PVC laminated steel sheet
The frame is filled with 45 mm thick thermally insulating material (STANDARD version),
or with 50 mm thick thermally insulating material and additionally clad with 3 mm thick
HDF board (PREMIUM version). The frame is clad with zinc-coated steel sheet 0.6 mm thick
and coated with wood-like PVC laminate.

LEAF EDGE PROFILE
Golden Oak
Walnut
The door leaf is rebated and its thickness depends on the version.
Mahogany
FINISHING
samples of colors
The door leaf is veneered with wood-like PVC laminate (“wood grain”).
see pages 156-158
MODELS
Single and double leaves, flat, solid.
ACCESSORIES – INCLUDED IN THE LEAF PRICE
„wood grain” surface structure
•
•
•
•
•
•
Two independent, multipoint locks adopted for two cylinder insert
Three silvery reinforced pintle hinges
Four anti-leverage security bolts – PREMIUM version
Three anti-leverage security bolts – STANDARD version
PVC veneered folded metal door frame
Glazed models come equipped with safe, tinted „reflex” glass
LEAF SIZES (PAGE 152, TABLE 4)
Single leaf: „80”, „90”, „100”
Double leaf: „130“ ÷ „200“1
DOOR LEAVES – CROSS-SECTIONS
DOOR FRAME
Three-layer thermally insulated
version (STANDARD)
Five-layer thermally insulated
version (PREMIUM)
• STANDARD version – zinc-coated steel sheet 1.5 mm thick coated with woodlike PVC
laminate. Door frame profile width – 80 mm.
• PREMIUM version – metal and wooden door frame composed of finger jointed softwood
and zinc-coated steel sheet 1.5 mm thick coated with wood-like PVC laminate. Door
frame profile width – 80 mm.
The door frames are manufactured and delivered as elements packed in a carton box for
assembly on do-it-yourself basis.
NOTES
AVAILABLE PROFILES OF DOOR FRAMES
• We recommend to use a canopy roof for the exterior doors. In the case of the doors which open
outwards, the canopy roof is obligatory. Assembly and operation of exterior doors – see page 149.
• To doors with glazing possible selection of options toward the door opening.
1 The minimum size for active leaf is „90”.
metal construction,
STANDARD version
metal/wooden construction,
PREMIUM version
ADDITIONAL CHARGES (OPTION)
eye-viewer in silver colour
straight handle
arched handle
handle with escutcheon, upper lock board (page 146)
stainless steel threshold (page 148)
straight handle
arched handle
(sample)
99
WROCLAW

High quality of materials combined with tried and tested door manufacturing technology of WROCLAW doors guarantee durable
construction, as well as high quality of finish. Two independent, multi-bolt „C” class locks, anti-leverage security bolts and safety
glass with reflective coating ensures the feelings of security for all the family.
(door leaf + door frame + metal threshold)
pattern 1
100
pattern 2
pattern 3
pattern 4
pattern 5
AVAILABLE COLORS
DOOR LEAF CONSTRUCTION
Exterior water-based varnish
Leaf frame is made from oak tree dressing. Leaf filling consists of hollow core particle
board reinforced with an inside plywood rail. A smooth or decoratively engraved thermal
insulation panel is set in the leaf frame. In lower part of the leaf of an inside opening door
there is a wooden eaves strip installed.

LEAF EDGE PROFILE
Oak 1
Oak 2
Oak 3
Oak 4
Oak 5
(Golden)
Oak 6
(White)
Outside leaf rail is in leaf color.
FINISHING
samples of colors
Door surface is protected with environmentally – friendly water based exterior varnish.
see pages 156-158
MODELS
Single leaf smooth or solid slot-milled and glass ported.
DOOR LEAVES – CROSS-SECTIONS
ACCESSORIES – INCLUDED IN THE LEAF PRICE
thermal insulation B (U = 1,7 W/m2 K)
• Two independent, multi-bolt locks for two patented cylinders
• Adjustable hook
• Three hinges adjustable in three dimensions with the use of the included
Allen key
• Anti-leverage security bolts
• Circumferential sponge seal around the leaf
• Threshold seal
• Metal or wooden threshold
• Glazed models come equipped with safe, tinted „reflex” glass
• Drip cap (with doors opening inwards)
• Door frame
LEAF SIZES (PAGE 152, TABLE 4)
Single leaf: „90”, „100”
DOOR FRAME
• Door frame is made from triple layer pine wood. Door frame profile: (93 x 70 mm).
NOTES
• European norm PN-EN 14351-1:2006.
• The CE marking.
• Heat loss index values:
for solid door leaf U = 1,7 W/m2 K,
for glass ported door leaf U = 2,0 W/m2 K
• For exterior doors canopy roof is recommended.
In the case of the doors which open outwards, the canopy roof is obligatory.
Assembly and operation of exterior doors – see page 148.
Two multi-bolt
locks
Adjustable hook
ADDITIONAL CHARGES (OPTION)
hinge covers (set on one pc)
handle with escutcheon, upper lock board (page 146)
101
GDYNIA

Innovative construction and rich design derived from the modernistic style specific for villas, residences and tenements are
characteristic for GDYNIA doors. Two independent, multi-bolt „C” class locks, anti-leverage security bolts and safety glass with
reflective coating ensures the feelings of security for all the family.
(door leaf + door frame + metal threshold)
pattern 1
102
pattern 1MS
pattern 1DS
pattern 2S
pattern 3
pattern 4
AVAILABLE COLORS
DOOR LEAF CONSTRUCTION
Exterior water-based varnish
The door leaf consist of a multi-layer finger jointed wood frame filled with slot-milled panel
with thermo-insulating core. In the bottom part of doors, which are opened ”inwards”,
there is installed a wooden drip.

LEAF EDGE PROFILE
Oak 1
Oak 2
Oak 3
Oak 4
Oak 5
(Golden)
Oak 6
(White)
Outside leaf rail is in leaf color.
FINISHING
The door surface is protected with ecologically safe water-based varnish for outdoor use.
Pine 1
samples of colors
Pine 2
Pine 3
Pine 4
Pine 5
(Golden)
see pages 156-158
MODELS
Single leaf: full or glazed. Single leaf with side transom (unilateral or bipartite) and upper
transom.
ACCESSORIES – INCLUDED IN THE LEAF PRICE
•
•
•
•
•
•
•
•
•
•
DOOR LEAVES – CROSS-SECTIONS
thermal insulation B (U = 1,7 W/m2 K)
Two independent, multi-bolt locks for two patented cylinders
Adjustable hook
Three hinges adjustable in three dimensions with the use of the included Allen key
Anti-leverage security bolts
Circumferential sponge seal around the leaf
Threshold seal
Metal or wooden threshold
Glazed models come equipped with safe, tinted „reflex” glass
Drip cap (with doors opening inwards)
Door frame
LEAF SIZES (PAGE 152, TABLE 4)
Single leaf: „90”, „100”
DOOR FRAME
• Door frame is made of multi-layer Oak or Pinewood with solid wooden lining. Door
frame profile: 93 x 70 mm.
NOTES
• European norm PN-EN 14351-1:2006.
• The CE marking.
• Heat loss index values:
for solid door leaf U = 1,7 W/m2 K,
for glass ported door leaf U = 2,0 W/m2 K
• In the case of the doors which open outwards, the canopy roof is obligatory.
• For exterior doors canopy roof is recommended.
• Assembly and operation of exterior doors – see page 148.
Two multi-bolt
locks
Adjustable hook
ADDITIONAL CHARGES (OPTION)
hinge covers (set on one pc)
handle with escutcheon, upper lock board (page 146)
pattern 5S
pattern 6S
103
TRANSOMS for GDYNIA

Door glazing and borrow light glazing perform an important function in house lighting. They supplement the GDYNIA exterior
door range. Discretion and privacy are ensured by dimmed safety glass with reflective coating and the veneer with wood grain
pattern improves the aesthetics of any area.
Upper transom no. 1, 2, 3
pattern 1
104
pattern 1S
pattern 2
pattern 2S
AVAILABLE COLORS
CONSTRUCTION
Exterior water-based varnish
The door leaf consist of a multi-layer finger jointed wood frame filled with slot-milled panel
with thermo-insulating core. In the bottom part of doors, which are opened ”inwards”,
there is installed a wooden drip.

FINISHING
Oak 1
Oak 2
Oak 3
Oak 4
Oak 5
(Golden)
Oak 6
(White)
The transom surface is protected with ecologically safe water-based varnish for outdoor use.
MODELS
• Side transoms
• Upper transoms
Pine 1
samples of colors
Pine 2
Pine 3
Pine 4
see pages 156-158
Pine 5
(Golden)
MODELS
GDYNIA: side transoms – no. 1 and no. 2, full and glazed
• no. 1 – for single doors „90” and „100”
• no. 2 – for doors with a single side transom „90“+„30” and „100”+„30”
• no. 3 – for doors with two side transoms „30“+„90“+„30” and „30”+„100”+„30”
DIMENSIONS (PAGE 152, TABLE 4)
DOOR LEAVES – CROSS-SECTIONS
• Side transoms width: ”30”.
• Upper rectangular transoms – height ”30”.
NOTES
thermal insulation B (U = 1,7 W/m2 K)
• European norm PN-EN 14351-1:2006.
• The CE marking.
105
Doors made of acid-resistant steel
TECHNICAL AND METAL
doors
T he number of buildings in which the designers use improved
parameters’ doors is growing. In order to meet the demands of the
investment market and Building Code requirements PORTA KMI Poland
extended its range with technical doors and has become a producer
of complete door sets including both the interior doors and dedicated
technical doors. The parameters of the PORTA technical doors have
been measured and confirmed by a number of tests carried out in
dedicated laboratories.
The range of technical doors includes the following:
– three types of 27 dB, 32 dB and 42 dB noise reduction doors,
– two types of door with 30 and 60 minutes fire resistance,
– ENDURO doors with increased resistance,
– AQUA doors prepared to work in areas of high humidity,
– metal and acidproof sheet metal doors,
– metal doors with 30 minutes fire resistant.
As 42 dB doors are additionally resistant to fire for 30 minutes and
smokeproof, they have been appreciated by the investors dealing with
construction of high standard hotels and office buildings.
Rw = 27 dB, Rw = 32 dB
Rw = 42 dB
EI 30, EI 60
ENDURO
AQUA
Metal doors EI 30
Enjoy the quality!
new colors!
new colors!
new colors!
Rw=27 dB, Rw=32 dB

For public buildings we offer sets of doors (door leaf and door frame) which belong to Rw=27 dB or Rw=32 dB acoustic class.
Doors with diversified noise protection performance are appropriate for hotel rooms, offices, lecture halls, hospitals and other
public buildings.
Non-typical project depicted in the photo (Porta CONTRACT).
(door leaf + door frame)
flat
108
pattern 2
pattern 3
pattern 4
pattern 6
pattern 7
pattern 8
pattern 9
AVAILABLE COLORS
PVC veneer
Light beech
DOOR LEAF CONSTRUCTION RW = 27 DB
The door leaf consists of a finger jointed softwood or exotic sawn timber frame filled with
reinforced perforated chipboard and covered from both sides with HDF boards. The door
construction in ROENTGEN 1 version is complemented by a coat of lead which makes an
anti-radiant barrier.

Alder
Apple tree
DOOR LEAF CONSTRUCTION RW = 32 DB
Golden Oak
The door leaf consists of exotic sawn timber frame filled with reinforced multilayer chipboard
and covered from both sides with HDF boards.
Oak
Walnut
HQ CPL veneer
LEAF EDGE PROFILE
White
„wood grains”
Both side edges and higher part are covered with skirting tape in the color of the
door leaf. For doors veneered with CPL HQ both side edges and the upper edge
of the leaf covered with 1 mm thick ABS tape of the same colour as the door.
The leaf itself is made in the rebate version.

White
Grey
Euroinvest
Oak
Milano 1
Oak
Milano 2
Beech Porta
Mahogany
MODELS
Walnut
Single doors: full – flat or slot-milled.
ACCESSORIES – INCLUDED IN THE LEAF PRICE
Oak
Milano 3
Oak
Milano 4
•
•
•
•
•
Oak
Milano 5
NEW
COLORS
White
Walnut
Walnut
Modena 1
Walnut
Modena 1
Standard natural veneer
LEAF SIZES (PAGE 151, TABLE 3)
„60”2 (flat only), „70”, „80”, „90”, „100”*

RECOMMENDED DOOR FRAMES
Oak 1
Oak 2
Oak 3
Oak 4
Oak 5
Oak 6
Limba 1
Limba 2
Limba 3
Limba 4
Limba 6
Maple 1
Sapelli 3
Sapelli 4
• Adjustable Porta SYSTEM door frame (27 dB) or adjustable reinforced
Porta SYSTEM door frame (32 dB) in leaf color, in accordance with the
Porta SYSTEM color range
• Angle-bar metal door frame of profile 100 mm wide, made of both sides
zinc-coated steel 1.5 mm thick. It is painted with power paint in one of
standard colors: white (RAL 9016), grey (RAL 7047), cream (RAL 1001),
brown (RAL 8028).
Door frame is available in two versions: level ”0” or ”-30“.
• PROJECT door frame (page 142)
Sapelli 6
Satin natural veneer

NOTES
NEW
COLORS
Bianco
Three pintle hinges*
Lock for cylinder insert
Automatic threshold seal in the leaf bottom edge
Seal in door frame
Door frame
Tabacco
Mocca
• Acoustic class Rw = 27 dB (range 27 ÷ 31 dB)
• Acoustic class Rw = 32 dB (range 32 ÷ 36 dB)
• * Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
Nero
1
Select natural veneer

2
Oak
Teak
Cherry
Rosewood
Wenge
To meet the shield-door requirements, it is necessary to apply a layer of lead onto the
door frame used for the ROENTGEN leaf. Flat leaves may be equipped with special glazing.
Order execution requires individual arrangements with the PORTA Contract Department.
Minimum width of the leaf: strip 1 – 444 mm, strip 2 – 644 mm, strip 3 – 468 mm, strip 4 – 744 mm.
Ebony
NEW
COLORS
White Oak
samples of colors
AVAILABLE PROFILES OF DOOR FRAMES
American
Walnut
Classic
Walnut
Dark
Walnut
see pages 156-158
DOOR LEAVES – CROSS-SECTIONS
Porta SYSTEM door frame
(27 dB)
perforated chipboard
(27 dB)
Metal door frame
(27 dB, 32 dB)
Reinforced Porta SYSTEM
door frame (32 dB)
multilayer chipboard
(32 dB)
ADDITIONAL CHARGES (OPTION)
„100” size
handle with escutcheon (page 146)
finishing with satin natural veneer
perforated chipboard + lead screen
(ROENTGEN)
* strip 1 (for 1 side – price for two sides x 2)
* strip 2 (for 1 side – price for two sides x 2)
* strip 3 (for 1 side – price for two sides x 2)
* strip 4 (for 1 side – price for two sides x 2)
leaf frame made of exotic timber (in Rw = 27 dB only)
reinforcement for the Porta SYSTEM frame, size A
reinforcement for the Porta SYSTEM frame, size B, C, D, E, F
reinforcement for the Porta SYSTEM frame, size G, H, I, J, K
expanding the frame section from 80 to 100 mm – free of charge
expanding the frame section from 101 to 150 mm
expanding the frame section from 151 to 270 mm
expanding the frame section from 271 to 390 mm
strip 1*
strip 2*
strip 3 *
with panel
* designs available only with standard natural oak and limba veneers
strip 4 *
with panel
109
Rw=42 dB

The rooms exposed to an increased noise level, which need high noise insulation, we offer interior entrance doors with Rw=42 dB
insulation class. The door leaf installed complete with a metal frame has 30 minute fire resistance and is smokeproof so that it
protects against fire effects, particularly against very dangerous CO effects. This model may be used in high specification public
or residential buildings.
Non-typical project depicted in the photo (Porta CONTRACT).
(door leaf + door frame)
flat
110
pattern 2
pattern 3
pattern 4
pattern 6
pattern 7
pattern 8
pattern 9
AVAILABLE COLORS
PVC veneer
DOOR LEAF CONSTRUCTION
The door leaf consists of exotic sawn timber frame filled with a special PORTA multi-layer
sound insulating core and covered from both sides with HDF boards.

LEAF EDGE PROFILE
Light beech
Alder
Apple tree
Both side edges and higher part are varnished with transparent lacquer. Double rebate on
three edges (two vertical and one horizontal).
Golden Oak
FINISHING
Oak
Walnut
HQ CPL veneer
The leaf is veneered with HQ CPL laminate 0.7 mm thick, natural veneer (flat door leaves
only) or PVC veneer (flat and slot-milled).
White
„wood grains”
MODELS

Single leaf: flush, slot-milled or with strips. Strips may be ordered for both sides or for any
side of the door leaf.
White
Grey
Euroinvest
Beech Porta
Mahogany
Walnut
Oak
Milano 1
Oak
Milano 2
Oak
Milano 3
Oak
Milano 4
Oak
Milano 5
ACCESSORIES – INCLUDED IN THE LEAF PRICE
•
•
•
•
•
•
NEW
COLORS
White
Walnut
Walnut
Modena 1
LEAF SIZES (PAGE 151, TABLE 3)
„80”, „90”, „100”*
Walnut
Modena 1
Standard natural veneer
RECOMMENDED DOOR FRAMES

Oak 1
Oak 2
Oak 3
Oak 4
Oak 5
Oak 6
Limba 1
Limba 2
Limba 3
Limba 4
Limba 6
Maple 1
Sapelli 3
Sapelli 4
• Adjustable reinforced Porta SYSTEM door frame (type DT-AW/PS) for wall thickness
between 120 mm and 300 mm. Frame beams are made of plywood. Door frame is covered
with HQ CPL, PVC or natural veneer, in accordance with the Porta SYSTEM color range.
Information about the full extent of regulation and price range for this door frame is
available on our website.
• Angle-bar metal door frame of profile 120 mm wide (type DT-AW/M), made of both
sides zinc-coated steel 1.5 mm thick. It is painted with power paint in one of standard
colors: white (RAL 9016), grey (RAL 7047), cream (RAL 1001), brown (RAL 8028), prepared
for installation of self-closer.
Door frame is available in two versions: level “0” or level “-30”.
• PROJECT door frame (page 142)
Sapelli 6
Satin natural veneer

NOTES
NEW
COLORS
Bianco
Tabacco
Mocca
Select natural veneer
Oak
Three (two in a metal frame) reinforced pintle hinges, made of steel, flush mounted*
Lock for cylinder insert
Two automatic threshold seals
Circumferential rubber seal at the leaf and frame mating point
Temperature expandable seal (fire-resistant doors)
Door frame
Teak
• To meet the Technical Approval requirements, 30-minute fire resistant doors need to be
equipped with a self-closing device.
• Acoustic class Rw = 42 dB (range 42 ÷ 46 dB).
* Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
Nero

AVAILABLE PROFILES OF DOOR FRAMES
Cherry
Rosewood
Wenge
Ebony
NEW
COLORS
White Oak
samples of colors
American
Walnut
see pages 156-158
Classic
Walnut
Dark
Walnut
Metal door frame
(42 dB)
Reinforced Porta SYSTEM
door frame (42 dB)
DOOR LEAVES – CROSS-SECTIONS
PORTA multilayer construction (42 dB)
ADDITIONAL CHARGES (OPTION)
„100” size
handle with escutcheon (page 146)
finishing with satin natural veneer
* strip 1 (for 1 side – price for two sides x 2)
* strip 2 (for 1 side – price for two sides x 2)
* strip 3 (for 1 side – price for two sides x 2)
*strip 4 (for 1 side – price for two sides x 2)
reinforcement for the Porta SYSTEM frame
expanding the frame section from 121 to 150 mm
expanding the frame section from 151 to 270 mm
expanding the frame section from 271 to 390 mm
strip 1*
strip 2*
strip 3 *
with panel
* designs available only with standard natural oak and limba veneers
strip 4 *
with panel
111
EI 30, EI 60

Two types of door with special fire resistance EI 30 of 30 minutes and EI 60 of 60 minutes.
They perfectly work in the fire walls, where the door fire resistance class should correspond to the half of the wall fire resistance
class. The EI 30 and EI 60 doors ensure protection against fire spreading and provide with 32 dB noise insulation. The doors are
generally applied in all public services such as hotels, schools, hospitals, etc. We offer doors complete with the door frames.
(door leaf + door frame)
Full doors in PVC veneer are available in slot-milled patterns (see page 110).
flat
112
pattern 2 (EI 60)
pattern 3 (EI 30)
strip 1*
strip 2*
strip 3 *
with panel
strip 4 *
with panel
* designs available only with standard natural oak and limba veneers
AVAILABLE COLORS
PVC veneer
DOOR LEAF CONSTRUCTION
The leaf frame is made of exotic timber dressing (EI 30) or of a finger jointed softwood (EI 60). The
core consists of fire resistant chipboards positioned in layers. The leaf skin is an HDF board.
Glazed leaves use multi-layer, transparent, fire resistant combined EI 30 or EI 60 glass.

LEAF EDGE PROFILE
Light beech
Alder
Apple tree
Oak
Walnut
White
„wood grains”
HQ CPL veneer
Both side edges and higher part are covered with skirting tape in the color of the door leaf.
For doors veneered with CPL HQ both side edges and the upper edge of the leaf covered
with 1 mm thick ABS tape of the same colour as the door.
The leaf itself is made in the rebate version.
Golden Oak
FINISHING

The leaf is veneered with HQ CPL laminate 0.7 mm thick (flat door leaves only), natural
veneer (flat door leaves only) or PVC veneer (flat and slot-milled). MDF frame is veneered
using the colour of the door leaf.
White
Grey
Euroinvest
Beech Porta
Mahogany
Walnut
Oak
Milano 1
Oak
Milano 2
Oak
Milano 3
Oak
Milano 4
Oak
Milano 5
MODELS
Single doors: full – flat (full or glazed) or slot-milled. Strips may be ordered for both sides or
for any side of the door leaf. Double EI 30 or EI 60.
ACCESSORIES – INCLUDED IN THE LEAF PRICE
•
•
•
•
•
•
•
NEW
COLORS
White
Walnut
Walnut
Modena 1
Walnut
Modena 1
Standard natural veneer
Oak 1
Oak 2

Three (EI 30) or four (EI 60) hinges*
Lock for cylinder insert
Fire-proof pane (width is not dependent on leaf size)
Thermo-swelling seal in door leaf
Fire resistant seal in door frame
Automatic threshold seal in the leaf bottom edge
Door frame
LEAF SIZES (PAGE 151, TABLE 3)
Oak 3
Oak 4
Oak 5
Oak 6
Single leaf*: „60”1, „70”, „80”, „90”, „100”2
Double leaf*: „120”÷„200”
RECOMMENDED DOOR FRAMES
Limba 1
Limba 2
Sapelli 3
Sapelli 4
Satin natural veneer
Limba 3
Limba 4
Limba 6
Maple 1
Sapelli 6

NEW
COLORS
Bianco
Tabacco
Select natural veneer
Oak
Mocca
Nero
NOTES
• To meet the Technical Approval requirements, fire resistant doors need to be equipped with
a self-closing device.
• Acoustic class Rw = 32 dB (range 32 ÷ 36 dB). EI 60 doors have acoustic in single full pattern.
* Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.

Teak
Cherry
Rosewood
Wenge
Ebony
NEW
COLORS
White Oak
American
Walnut
samples of colors
• MDF door frame of profile 100 mm wide and adjustable EI30 (160 mm), equipped with
adjustable hinges in leaf color, in accordance with door leaf color range.
• Wooden door frame of profile 100 mm wide (EI 60) made from triple layer pine wood,
equipped with adjustable hinges, veneered in leaf color.
• Angle-bar metal door frame of profile 100 mm wide, made of both sides zinc-coated
steel 1.5 mm thick. It is painted with power paint in one of standard colors: white
(RAL 9016), grey (RAL 7047), cream (RAL 1001), brown (RAL 8028). It is equipped with
assembly dowels and prepared for installation of self-closer mechanism.
Door frame is available in two versions: level “0” or level “-30”.
• PROJECT door frame (page 142).
Classic
Walnut
1
2
Minimum width of the leaf: strip 1 – 444 mm, strip 2 – 644 mm, strip 3 – 468 mm, strip 4 – 744 mm.
In EI 60 doors, size „100” not available in standard offer – requires individual arrangements (Porta
CONTRACT).
Dark
Walnut
see pages 156-158
AVAILABLE PROFILES OF DOOR FRAMES
DOOR LEAVES – CROSS-SECTIONS
fire-resistant perforated chipboard (EI 30)
fire-resistant chipboard (EI 60)
WALL THICKNESS RANGE – ADJUSTABLE MDF DOOR FRAME (EI 30)
MDF door frame
(EI 30)
Adjustable MDF door
frame (EI 30)
A
160 ÷ 180 mm
G
285 ÷ 305 mm
B
180 ÷ 200 mm
H
305 ÷ 325 mm
C
205 ÷ 225 mm
I
325 ÷ 345 mm
D
225 ÷ 245 mm
J
345 ÷ 365 mm
ADDITIONAL CHARGES (OPTION)
E
245 ÷ 265 mm
K
365 ÷ 385 mm
„100” size
F
265 ÷ 285 mm
Metal door frame
(EI 30 / EI 60)
Wooden door frame
(EI 60)
handle with escutcheon (page 146)
finishing with satin natural veneer
* strip 1 (for 1 side – price for two sides x 2)
* strip 2 (for 1 side – price for two sides x 2)
* strip 3 (for 1 side – price for two sides x 2)
* strip 4 (for 1 side – price for two sides x 2)
quarter round, masking architraves (from page 149)
anti-smoking seals (EI 60)
the metal frame section from 80 to 100 mm – free of charge
expanding the metal frame section from 101 to 150 mm
expanding the metal frame section from 151 to 270 mm
expanding the metal frame section from 271 to 390 mm
(EI 60)
(EI 30)
samples of glazings in contractual offer
113
ENDURO

ENDURO – technical interior doors of highest quality, abrasion and external factor resistance class. ENDURO series is a new range of
doors which feature mechanical strength and modern design. The highest resistance parameters has been obtained, among other
things, due to the use of a profiled stainless steel strip and exceptionally resistant HPL veneer.
Primarily designed for use in all structures exposed to a heavy everyday traffic such as airports, trade centers, hospitals, hotels etc.
(door leaf + door frame)
full
114
pattern 1
pattern 2
pattern 3
pattern 4
AVAILABLE COLORS
HPL veneer
DOOR LEAF CONSTRUCTION
The door leaf consists of a finger jointed softwood frame filled with reinforced solid
chipboard. The leaf is also additionally reinforced with an internal sill and covered on both
sides with HDF boards.

LEAF EDGE PROFILE
White
Grey
Euroinvest
Light
yellow
“K” profile leaf edge - the side edges are reinforced with rustless steel architraves. The leaf
itself is made in the rebate version (except swing-leaf version).
Green
FINISHING
The door leaf is veneered with HPL laminate with 0.7 mm thick.
Beech
Apple tree
Mahogany
MODELS
Single leaf: full, glazed. Every model can be ordered as a swing version.
samples of colors
see pages 156-158
ACCESSORIES – INCLUDED IN THE LEAF PRICE
•
•
•
•
DOOR LEAVES – CROSS-SECTIONS
Three reinforced standard pintle hinges (in a swing-leaf stainless steel version)*
Pane pattern (transparent or hardened mat)
Lock: for regular key, bathroom lock or for cylinder insert
Door frame
LEAF SIZES (PAGE 151, TABLE 3)
Single leaf*: „60” ÷ „100”
DOOR FRAME
• Angle-bar metal frame of profile 100 mm. The frame is made of both sides zinc coated
steel 1,2 mm thick. It is equipped with: three standard pintle hinges, circumferential
rubber seal, six assembly dowels. It’s also painted with polyester powder paint: white
(RAL 9016), grey (RAL 7047), cream (RAL 1001), brown (RAL 8028), green (RAL 6019).
• Door frame is available in two versions:
– for setting on already prepared floor – level “0”
– for cementing in the floor – level “-30”.
perforated chipboard (ENDURO)
ENDURO EQUIPMENT
NOTES
*
Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
(1)
(2)
(3)
(4)
ADDITIONAL CHARGES (OPTION)
„100” size
handle with escutcheon (EDEL)
the frame section from 80 to 100 mm – free of charge
expanding the frame section from 101 to 150 mm
expanding the frame section from 151 to 270 mm
(5)
(6)
W A R R A N T Y
10
expanding the frame section from 271 to 390 mm
1) upper panel (set on two sides)
(2) bottom panel (set on two sides)
(3) bottom ventilation panel (set on two sides)
years
for door construction
(4) ventilation grid (set on two sides)
(5) straight handle (set on one side)
(6) swing version
115
AQUA

AQUA type doors turn out to be useful in rooms with high humidity. Door structure enables use in all types of rooms exposed
to direct contact with water. Applied HPL coat, resistant to mechanical damage guarantees long-term exploitation of doors in
extreme conditions. Doors are especially suitable for swimming pools, car washes, bathhouses, etc.
(door leaf + door frame)
full
116
pattern 1
pattern 2
pattern 3
pattern 4
DOOR LEAF CONSTRUCTION
AVAILABLE COLORS
HPL veneer
Blue
samples of colors

White
Grey
Euroinvest
see pages 156-158
Door leaf frame is made of slow-burning, chemical resistant, water-resistant material.
Core is made of hard polyurethane foam with similar properties. Door leaf components
are joined using water-resistant and chemical resistant adhesive. Frame with core is coated
from both sides with HPL – material resistant to mechanical damage.
PROFIL
Door leaf is available only in non-rebate version.
FINISHING
Door leaf is coated with HPL veneer (1.5 mm thick).
MODELS
Single leaf: full and with glazing.
DOOR LEAVES – CROSS-SECTIONS
ACCESSORIES – INCLUDED IN THE LEAF PRICE
• Two hinges made of stainless steel*
• Pane pattern (transparent or hardened mat)
• Lock made of stainless steel available in three versions: for regular key, with bathroom
lock or cylinder insert
• Door frame
LEAF SIZES (PAGE 151, TABLE 3)
hard polyurethane foam (AQUA)
Single leaf*: „60” ÷ „100”
DOOR FRAME
• Large angle-bar frame of profile 100 mm. The frame is made of both sides zinc coated
steel 1.2 mm thick. It is equipped with: two hinges pintle standard, circumferential
rubber seal, six assembly dowels. It’s also painted with polyester powder paint: white
(RAL 9016), grey (RAL 7047) or blue (RAL 5005).
• Door frame is available in two versions:
– for setting on already prepared floor – level “0”
– for cementing in the floor – level “-30”
NOTES
*
Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
ADDITIONAL CHARGES (OPTION)
„100” size
handle with escutcheon (EDEL)
ventilation grid made from stainless steel
the frame section from 80 to 100 mm – free of charge
expanding the frame section from 105 to 150 mm
expanding the frame section from 155 to 270 mm
expanding the frame section from 275 to 390 mm
117
Metal doors

Metal doors are manufactured with two coating versions: acid proof and zinc-coated steel sheet in painted or PVC coated
version. High technical parameters ensured the certificate of the National Institute of Hygiene for the metal doors and they
may be used in hospitals, laboratories, restaurants, utility rooms, basements, garages etc
Non-typical project depicted in the photo (Porta CONTRACT).
full
118
pattern 1
pattern 2
pattern 3
pattern 4
pattern 3
Acid-resistant steel –
sample
AVAILABLE COLORS
Polyester paint
White
(RAL 9016)
DOOR LEAF CONSTRUCTION
Closed jacket structure of brushed stainless steel (acid proof) or steel sheet zinc-coated on
both sides, painted or PVC laminated (extra charged option)1. The leaf filled with foamed
polystyrene, mineral wool or reinforced honeycomb core with wood inserts for hinges and
lock. For acid proof version stainless steel hardware are provided.

Grey
(RAL 7047)
Cream
(RAL 1001)
PVC laminated steel sheet
Brown
(RAL 8028)

LEAF EDGE PROFILE
Both sides and the upper edge of the leaf come in leaf color finish. The leaf itself is made
in the rebate version.
FINISHING
Golden Oak
Steel
Walnut
Zinc-coated sheet leaf finish:
• powder-coated with polyester primer paints (honeycomb or mineral wool core)
• not painted (filled with foamed polystyrene)
• wood-like PVC laminate (for all types of cores)
Brushed stainless steel finish (acid proof):
• no coating for any type of core.
Mahogany

MODELS
Acid-proof
stainless steel
Single and double doors (only for door leaves from zinc-coated steel): full, glazed.
ACCESSORIES – INCLUDED IN THE LEAF PRICE
samples of colors
see pages 156-158
• Two standard pintle hinges (three hinges for a leaf of dimension „100“)*
• Lock for cylinder insert
• Pane pattern (transparent or hardened mat)
LEAF SIZES (PAGE 151, TABLE 3)
DOOR LEAVES – CROSS-SECTIONS
Single leaf*: ,,60”, ,,70”, ,,80”, ,,90”, ,,100”
Double leaf*: (only for zinc-coated leaves): „120” ÷ „200” 2
RECOMMENDED DOOR FRAMES (FROM PAGE 124)
foamed polystyrene (U = 0,88 W/m2 K)
mineral wool (U = 0,91 W/m2 K)
• Large angle-bar door frame to be assembled, made of brushed stainless steel (acid
proof)
• Metal door frames.
NOTES
„honeycomb” stabilizing
• Door leaves made of acid-resistant steel or with foamed polystyrene are available in
non-varnished version.
* Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
1
2
PCV coating may only be provided for solid or bull’s eye doors (model no 4).
Arbitrary selection of door leaf sizes for double doors.
ADDITIONAL CHARGES (OPTION)
„100” size (zinc-coated leaves)
„100” size (stainless steel acid proof leaves)
PCV laminate
ventilation sleeves (zinc-coated leaves)
ventilation grid (zinc-coated leaves)
handle with escutcheon
third hinge for the leaf dimensions „60”, „70”, „80” or „90”
119
Metal doors EI 30

Metal doors with special fire resistant qualities – EI 30 are a universal solution for application in any kind of building meant for public use. Doors
provide excellent protection from spreading fire in our garage, basement, workshop and in large warehouses and halls.
The self-closing mechanism installed allows for efficient traffic flow and increases the level of safety by separating the danger zone from the rest of
the rooms.
(door leaf + door frame+ handle)
full
120
pattern 1
pattern 2
pattern 3
AVAILABLE COLORS

DOOR LEAF CONSTRUCTION
Leaf plate, 53 mm in total thickness, is an enclosed sleeve construction made of galvanized
steel metal plate 0,8 mm thick. Leaf structure is reinforced by steel flat bars. Leaf filling
consists of mineral wool.
Polyester paint
LEAF EDGE PROFILE
White
(RAL 9016)
Grey
(RAL 7047)
Cream
(RAL 1001)
Brown
(RAL 8028)
Leaf is produced with a double rebate (20 mm wide).
FINISHING
samples of colors
see pages 156-158
Made of galvanized steel plating painted with polyester powder paint.
MODELS
DOOR LEAVES – CROSS-SECTIONS
Single leaf: full or glazed.
ACCESSORIES – INCLUDED IN THE LEAF PRICE
mineral wool (U = 0,91 W/m2 K)
• Two triple element hinges, one of them is a load bearing one, the other, thanks to the
spring enclosed in it, facilitates doors closing on their own
• Insert lever lock
• Anti-leverage security bolt
• Set of door handles with plates
• Transparent fireproof pane
LEAF SIZES (PAGE 151, TABLE 3)
Single leaf*: ,,60”, ,,70”, ,,80”, ,,90”, ,,100”
DOOR FRAME
• Angle-bar metal door frame with an 84 mm wide edge. Made of double sided
sherardized steel plate of 1,5 mm thickness. Varnished using powdered primer paint
in white (RAL 9016), grey (RAL 7047), brown (RAL 8028), cream (RAL 1001). Fitted with
cushion seal and expansion seal.
• Possibility to order metal door frames in one of two versions:
– for setting on the ready floor – level “0”
– for cementing in the floor – level “-30”– equipped with a threshold element.
NOTES
• Full doors, as well as patterns 1 and 3 sold as sets with the „-30 level” frame do not have the
direction of opening marked and are universal with this respect.
• To meet the outside door approval requirements, glazed models must be equipped with glass
characterized by special parameters – price and execution lead time to be arranged with the
PORTA Contract Department.
* Quantity, spacing, type of hinges and leaf size depends on the type of standard.
Given characteristics relate to the Polish standards.
ADDITIONAL CHARGES (OPTION)
fireproof eye-viewer
stainless steel threshold
reinforcement for the self-closing device
121
Porta SYSTEM door frame
DOOR FRAMES, TRANSOMS
T
here are no complete doors without door frames. PORTA KMI
Poland offer for each door model a door frame, which is technically
and aesthetically compatible with the door. Our range includes many
door frames with modern shape available with many finishes: natural,
synthetic or metal veneers.
In order to keep the proper parameters specific for entrance, technical
and metal doors it is necessary to use our compatible door frame. At the
same time we would like to assure you that all our door frames comply
with the Polish Standard and may be used with the door leaves of other
producers.
MINIMAX
new colors!
Porta SYSTEM
new colors!
Porta SYSTEM ELEGANCE
new product!
PRESTIGE
new colors!
Porta SYSTEM Gipsy Kings
new product!
Transoms
Small ANGLE-BAR door frame
Large ANGLE-BAR door frame
Folding large ANGLE-BAR door frame
METAL adjustable door frame
AGATE-OPAL door frame
METAL sliding door system
PROJECT door frame
Enjoy the quality!
MINIMAX
interior door frames, fixed width: 60 mm and 100 mm
MINIMAX interior door frames with constant width of 100 mm are compatible with all Porta interior door leaves provided with
Portadecor, Portacortex, Super Matt, PVC, HQ CPL, Portadur and natural veneers.
Door frames 60 mm wide are compatible only with MINIMAX doors and all interior doors with Portadecor veneer.
cover plate
60 mm,
synthetic veneer
seal
100 mm,
synthetic or natural
veneer
EXAMPLES OF INSTALLATION
124
Installed in brick wall using
foam and anchors.
Installed in brick wall using
foam.
Installed in plaster board
wall using foam.
Installed in plaster board
wall using tap screws.
AVAILABLE COLORS
Portadecor veneer
Grey
Euroinvest
CONSTRUCTION

Beech
Bavaria
Oak*
Cherry tree
Walnut
Wenge
NEW
COLORS
Light Oak
Walnut
Verona2
Walnut
Verona1
Walnut
Verona3
White
ACCESSORIES – INCLUDED IN THE MINIMAX 60 MM PRICE

NEW
COLORS
Bark 1
Bark 2
Super Matt veneer
Bark 3
Bark 4
ACCESSORIES – INCLUDED IN THE MINIMAX 100 MM PRICE

– synthetic veneers:
• Two standard pintle hinges
• Three hinges for the frame of size „100” and in all sizes of door frames
• veneered with Portadur veneer
– natural veneers:
• Two sets of PRIME hinges
• Three sets of PRIME hinges in frame of size „90” and „100” and in all select
• natural veneers
• Circumferential rubber seal around the door frame
• Overlays against moisture down the door frame
NEW
COLORS
White
Portadur veneer
Walnut 2
PVC veneer
Light beech

Walnut 3
Walnut 4
Walnut 5
Walnut 6
DOOR FRAME SIZES (PAGE 150, TABLE 1)

Alder
FINISHING
The frames are veneered with: Portadecor, Portadur, Portacortex, Super Matt, PCV, HQ CPL,
and natural wood veneers.
(available in Portadecor veneer only)
• Two standard pintle hinges
• Three hinges for the frame of size „100”
• Stops
• Dowels, plugs
• Plastic cover plates for frame bottom protection against moisture
* till stock-out
Portacortex veneer
The frame consists of:
– one horizontal and two vertical MDF beams, equipped with appropriate hardware and
accessories
– architraves (charged additionally)
– quarter round (optionally charged additionally)
The door frame is manufactured and delivered to the customer as a set of components to
be assembled on site.
• Width: 60 mm and 100 mm.
„60”, „70”, „80”, „90”, „100” and any combination of these sizes in case of double doors.
Apple tree
Golden Oak
NOTES
Oak
• The door frames must be installed in rooms with completely finished walls (wallpaper, for example)
and floors (wooden flooring, for example).
• Possibility to order the door frame (100 mm) in “tunnel” version (without hinges, lock and seal
groove).
Walnut
HQ CPL veneer

White
Grey
Euroinvest
Beech Porta
Mahogany
Walnut
Oak
Milano 1
Oak
Milano 2
Oak
Milano 3
Oak
Milano 4
Oak
Milano 5
NEW
COLORS
White
Walnut
Walnut
Modena 1
Walnut
Modena 1
Standard natural veneer

Oak 1
Oak 2
Oak 3
Oak 4
Oak 5
Oak 6
Limba 1
Limba 2
Limba 3
Limba 4
Limba 6
Maple 1
Sapelli 3
Sapelli 4
Satin natural veneer
Sapelli 6

NEW
COLORS
Bianco
Tabacco
Select natural veneer
Oak
Teak
Mocca
Nero

Cherry
Rosewood
Wenge
NEW
COLORS
White Oak
samples of colors
American
Walnut
see pages 156-158
Classic
Walnut
Dark
Walnut
Ebony
ADDITIONAL CHARGES (OPTION)
finishing with satin natural veneer (100 mm door frame only) single doors
finishing with satin natural veneer (100 mm door frame only) double doors
finishing with satin natural veneer – straight or rounded architraves, quarter round
third hinge for the frames of size „60“ – „90” veneered with synthetic veneers
third hinge for the frames of size „60“ – „80” veneered with natural veneers
masking architraves, straight or rounded (from page 147)
quarter round (from page 147)
125
Porta SYSTEM
adjustable interior door frame
An easily assembled adjustable door frame. This allows for ideal adjustment to the wall thickness and to obtain an exceptionally
aesthetic finish. Reinforced hinge pockets guarantee construction stability even with very intensive use. Wide range of colours
allows adjustment any Porta leaf. Porta SYSTEM constitutes a set with all types of interior door leaves.
We especially recommend a very interesting solution to what is the use of overlay on the frame as a module RETRO. Easy to install
overlay can be installed not only for the purchase and installation of new frames, but also in a situation where we are dealing with
a previously Porta SYSTEM door frame.
This procedure will allow you to obtain a completely different and new style door what can encourage You to seek new inspiration
related to the housing arrangements as a consequence.
panel
Porta SYSTEM
+ with Adjustment Panel®
Porta SYSTEM
+ Module RETRO
Porta SYSTEM
WALL THICKNESS RANGE - ADJUSTMENT PANEL ®
WALL THICKNESS RANGE - PORTA SYSTEM
80 mm (or 160 mm)
Minimum
126
Maximum
20 mm
Minimum
Maximum
AVAILABLE COLORS
Portadecor veneer
Grey
Euroinvest
CONSTRUCTION

Beech
Bavaria
Oak*
Cherry tree
Walnut
Wenge
NEW
COLORS
Light Oak
Walnut
Verona2
Walnut
Verona1
Walnut
Verona3
White
ACCESSORIES – INCLUDED IN THE DOOR FRAME PRICE

NEW
COLORS
Bark 1
Bark 2
Super Matt veneer
Bark 3
Bark 4

NEW
COLORS
DOOR FRAME SIZES (PAGE 150, TABLE 1)
• For eleven ranges of wall thickness, from 75 mm up to 300 mm:
„60”, „70”, „80”, „90”, „100”, „110” and „120” ÷ „200”.
• In case of single doors „60” ÷ „90”with side panel „40”1.
White
Portadur veneer
FINISHING
The frames are veneered with: Portadecor, Portacortex, Super Matt, Portadur, PCV, HQ CPL
and natural wood veneers. Colors veneers are matched to the colors of door leaves which
are in the standard PORTA KMI Poland offer.
– synthetic veneers:
• Two standard pintle hinges
• Three hinges for the frame of size „100” and in all sizes of door frames veneered with
Portadur veneer
– natural veneers:
• Two sets of PRIME hinges
• Three sets of PRIME hinges in frame of size „90” and „100” and in all select natural
veneers
• Circumferential rubber seal around the door frame
* till stock-out
Portacortex veneer
The door frame consists of:
– one horizontal and two vertical made of solid chipboard, equipped with appropriate
hardware and accessories.
– architraves.
The Porta SYSTEM door frame is manufactured and delivered to the customer as a set of
components to be assembled on site.

NOTES
Walnut 2
PVC veneer
Walnut 3
Walnut 4
Walnut 5
Apple tree
Golden Oak
• The door frames must be installed in rooms with completely finished walls (wallpaper for
example) and floors (wooden flooring for example).
• Possibility to order the door frame in “tunnel” version (without hinges, lock and seal groove).
• RETRO module not available in HQ CPL veneer.
Walnut 6

1
Light beech
Alder
Oak
Walnut
HQ CPL veneer
Applies only to the door frame in natural veneer.

White
Grey
Euroinvest
Beech Porta
Mahogany
Walnut
Oak
Milano 1
Oak
Milano 2
Oak
Milano 3
Oak
Milano 4
Oak
Milano 5
NEW
COLORS
White
Walnut
Walnut
Modena 1
Walnut
Modena 1
Standard natural veneer

Oak 1
Oak 2
Oak 3
Oak 4
Oak 5
Oak 6
Limba 1
Limba 2
Limba 3
Limba 4
Limba 6
Maple 1
Sapelli 3
Sapelli 4
Sapelli 6
Satin natural veneer
A
B
C
D
E
F
G
H
I
J
K

NEW
COLORS
Bianco
Tabacco
Select natural veneer
Oak
Teak
Mocca
Nero

Cherry
Rosewood
Wenge
NEW
COLORS
White Oak
samples of colors
American
Walnut
see pages 156-158
Classic
Walnut
Dark
Walnut
WALL THICKNESS RANGE
75 ÷ 95 мм
95 ÷ 115 мм
120 ÷ 140 мм
140 ÷ 160 мм
160 ÷ 180 мм
180 ÷ 200 мм
200 ÷ 220 мм
220 ÷ 240 мм
240 ÷ 260 мм
260 ÷ 280 мм
280 ÷ 300 мм
Ebony
ADDITIONAL CHARGES (OPTION)
finishing with satin natural veneer - single doors
finishing with satin natural veneer - double doors
third hinge for the frames of size „60“ – „90” veneered with synthetic veneers
third hinge for the frames of size „60“ – „80” veneered with natural veneers
reinforcement for the self-closing device
127
Porta SYSTEM ELEGANCE
NON-REBATED ADJUSTABLE DOOR FRAME WITH WIDE TRIMS (80 mm)
NOVELTY
Porta SYSTEM ELEGANCE door frame is dedicated for internal non-rebated door leaves.
Easy to install adjustable door frame.
Hinges adjustable in three planes allow to match ideally the leaf and frame.
Frame construction wrap allows us to fit the thickness of the wall and thus allows to obtain an aesthetic finish.
Reinforced hinge pockets guarantee construction stability even with very intensive use of the doors.
80 mm
non-rebated door
non-rebated door frame
Porta SYSTEM ELEGANCE
broad architrave 80 mm
80 mm
non-rebated door leaf with
a door frame
Porta SYSTEM ELEGANCE
broad architrave 80 mm
common surface of
door leaf and door frame
hidden hinges
3D adjustment
80 m
128
m
CONSTRUCTION
AVAILABLE COLORS
Standard natural veneer
Oak 1
Oak 2
Oak 6
The door frame consists of:
– one horizontal and two vertical beams made of solid chipboard, equipped with
appropriate hardware and accessories.
– architraves.
Porta SYSTEM ELEGANCE door frame is manufactured and delivered to the customer as
a set of components to be assembled on site.
Maple 1
The frames are covered with the same natural veneer select as in the case of the
non-rebated door series.

Oak 3
Oak 4
Oak 5
FINISHING
Limba 1
Limba 2
Limba 3
Limba 4
Limba 6
ACCESSORIES – INCLUDED IN THE DOOR FRAME PRICE
Sapelli 3
Sapelli 4
Satin natural veneer
• Two sets of 3D adjustable hinges
• Circumferential rubber seal around the door frame
Sapelli 6

DOOR FRAME SIZES
For ten ranges of wall thickness, from 95 mm up to 300 mm:
„60”, „70”, „80”, „90”, „100” and „120” ÷ „200”.
NEW
COLORS
Bianco
Tabacco
Select natural veneer
Oak
Teak
Mocca
Nero

NOTES
• The door frames must be installed in rooms with completely finished walls (wallpaper for
example) and floors (wooden flooring for example).
Cherry
Rosewood
Wenge
Ebony
NEW
COLORS
White Oak
American
Walnut
samples of colors
Classic
Walnut
WALL THICKNESS RANGE - PORTA SYSTEM ELEGANCE
Dark
Walnut
20 mm
see pages 156-158
Maximum
130
Minimum
30
200
1155 *
1705
20
* – central hinge only in “100” size in the PN,
CN standard.
Dimension measured from the floor level is:
PN – 1155 mm
CN – 1110 mm
DIN – not available
WALL THICKNESS RANGE
B
95 ÷ 115 mm
C
120 ÷ 140 mm
D
140 ÷ 160 mm
E
160 ÷ 180 mm
F
180 ÷ 200 mm
G
200 ÷ 220 mm
H
220 ÷ 240 mm
I
240 ÷ 260 mm
J
260 ÷ 280 mm
K
280 ÷ 300 mm
ADDITIONAL CHARGES (OPTION)
finishing with satin natural veneer - single doors
finishing with satin natural veneer - double doors
When providing a wall opening for the Porta SYSTEM
ELEGENACE door frame remember to provide cut-outs must be
made at the level of door frame hinge pockets.
third hinge for the frames „100” size
129
PRESTIGE
adjustable interior door frame
Elegant adjustable interior PRESTIGE door frame belongs to the group of the highest quality and most advanced products.
The rElegant adjustable interior PRESTIGE door frame belongs to the group of the highest quality and most advanced products.
The rounded beam and door trims emphasize the modern design and allow to use PRESTIGE door frame in the exclusive spaces
and wherever aesthetics and quality are a priority.ounded beam and door trims emphasize the modern design and allow to use
PRESTIGE door frame in the exclusive spaces and wherever aesthetics and quality are a priority.
WALL THICKNESS RANGE
10 mm
Minimum
130
Maximum
AVAILABLE COLORS
Portadecor veneer
Grey
Euroinvest
CONSTRUCTION
The door frame consists of: one horizontal and two vertical made of MDF, equipped with
appropriate hardware and accessories: architraves.
The PRESTIGE door frame is manufactured and delivered to as a set of components to be
assembled on site.

Beech
Bavaria
Oak*
Cherry tree
Walnut
Wenge
NEW
COLORS
Light Oak
Walnut
Verona2
Walnut
Verona1
Walnut
Verona3
White
ACCESSORIES – INCLUDED IN THE DOOR FRAME PRICE
– synthetic veneers:
• Two pintle hinges standard
• Three hinges for the frame of size „100” and in all sizes of door frames veneered with
Portadur veneer
– natural veneers:
• Two sets of PRIME hinges
• Three sets of PRIME hinges in frame of size „90” and „100” and in all select natural
veneers
• Circumferential rubber seal around the door frame
* till stock-out
Portacortex veneer

NEW
COLORS
Bark 1
Bark 2
Super Matt veneer
Bark 3
FINISHING
The frames are veneered with: Portadecor, Portacortex, Super Matt, Portadur and natural
wood veneers.
Colors veneers are matched to the colors of door leaves which are in the standard PORTA
KMI Poland offer.
Bark 4

DOOR FRAME SIZES (PAGE 150, TABLE 1)
NEW
COLORS
For nineteen ranges of wall thickness from 100 mm up to 290 mm: „60”, „70”, „80”, „90”, „100”
and „120” ÷ „200” In case of single doors „60” ÷ „90” with side panel „40” 1.
White
1 Applies only to the door frame in natural veneer.
Portadur veneer

NOTES
Walnut 2
Walnut 3
Walnut 4
Standard natural veneer
Walnut 5
•
Walnut 6
The door frames must be installed in rooms with completely finished walls (wallpaper for example) and floors
(wooden flooring for example).

•
Oak 1
Oak 2
Oak 3
Oak 4
Oak 5
Oak 6
Limba 1
Limba 2
Limba 3
Limba 4
Limba 6
Maple 1
Sapelli 3
Sapelli 4
Possibility to order the door frame in “tunnel” version (without hinges, lock and seal groove)
Sapelli 6
Satin natural veneer

NEW
COLORS
Bianco
Tabacco
Mocca
Select natural veneer
Oak
Nero

Teak
Cherry
Rosewood
Wenge
Ebony
NEW
COLORS
White Oak
American
Walnut
samples of colors
Classic
Walnut
Dark
Walnut
see pages 156-158
WALL THICKNESS RANGE
A
100 ÷ 110 mm
K
B
110 ÷ 120 mm
L
210 ÷ 220 mm
C
120 ÷ 130 mm
M
220 ÷ 230 mm
D
130 ÷ 140 mm
N
230 ÷ 240 mm
E
140 ÷ 150 mm
O
240 ÷ 250 mm
F
150 ÷ 160 mm
P
250 ÷ 260 mm
ADDITIONAL CHARGES (OPTION)
G
160 ÷ 170 mm
R
260 ÷ 270 mm
finishing with satin natural veneer - single doors
H
170 ÷ 180 mm
S
270 ÷ 280 mm
finishing with satin natural veneer - double doors
I
180 ÷ 190 mm
T
280 ÷ 290 mm
third hinge for the frames of size „60“ – „90” veneered with synthetic veneers
J
190 ÷ 200 mm
200 ÷ 210 mm
third hinge for the frames of size „60“ – „80” veneered with natural veneers
131
Porta SYSTEM for GYPSY KINGS door leaves
adjustable interior door frame
Adjustable professional door frame dedicated for GIPSY KINGS glass door leaf. Special hinge pockets guarantee construction
stability even with very intensive use and considerable load. Adjustments to the door frame allow to ideally match it with the wall
thickness and to obtain an exceptionally aesthetic finish.
Please, contact the Porta Dealers to obtain advice and purchase GIPSY KINGS glass doors.
See www.szklanedrzwi.pl for the detailed offer for glass doors.
NOTE! The GIPSY KINGS glass door leaves designed for the presented PORTA SYSTEM door frame bear the Porta logo engraved in
a visible place. Only well matched set guarantees high utility parameters and satisfaction.
132
AVAILABLE COLORS
Portadecor veneer
Grey
Euroinvest
CONSTRUCTION
The door frame consists of the following:
– main beams: one horizontal and two vertical made of wood-derived materials
– trims.
Porta SYSTEM ELEGANCE door frame is manufactured and delivered to the Customer in the
form of a set of elements to be assembled on site.

Beech
Bavaria
Oak*
Cherry tree
Walnut
Wenge
NEW
COLORS
Light Oak
Walnut
Verona2
Walnut
Verona1
Walnut
Verona3
White
ACCESSORIES - INCLUDED IN THE DOOR FRAME PRICE
• Lock strike (short)
• Rubber seal around the door frame
• 2 hinge pockets for „60” ÷ „90” sizes; 3 pieces for „100” size
NOTE! Hinges are delivered by the glass door leaf Manufacturer, i.e. Gypsy Kings Company –
www.szklanedrzwi.pl
* till stock-out
Portacortex veneer

NEW
COLORS
Bark 1
Bark 2
Super Matt veneer
Bark 3
FINISHING
The following veneers are used for the door frames: Portadecor, Portacortex, Super Matt,
Portadur, PVC, HQ CPL and natural veneers.
The veneer colours match the standard door leaf colours offered by Porta KMI Poland.
DOOR FRAME SIZE (PAGE 150, TABLE 1)
Eleven wall thickness sizes: 75 - 300 mm: „60”, „70”, „80”, „90”, „100”.
Bark 4

NOTES
NEW
COLORS
• Door frame should be installed only after the walls (e.g. wall paper) and floor(parquet) are
finished.
White
Portadur veneer
Walnut 2
PVC veneer

Walnut 3
Walnut 4
Walnut 5
Apple tree
Golden Oak
Walnut 6

Light beech
Alder
Oak
Walnut
HQ CPL veneer

White
Grey
Euroinvest
Beech Porta
Mahogany
Walnut
Oak
Milano 1
Oak
Milano 2
Oak
Milano 3
Oak
Milano 4
Oak
Milano 5
NEW
COLORS
White
Walnut
Walnut
Modena 1
Walnut
Modena 1
Standard natural veneer

Oak 1
Oak 2
Oak 3
Oak 4
Oak 5
Oak 6
Limba 1
Limba 2
Limba 3
Limba 4
Limba 6
Maple 1
Sapelli 3
Sapelli 4
Satin natural veneer
Sapelli 6

WALL THICKNESS RANGE – PORTA SYSTEM
NEW
COLORS
Bianco
Tabacco
Select natural veneer
Oak
Teak
Mocca
20 mm
Nero

Cherry
Rosewood
Wenge
Ebony
Minimum
Maximum
NEW
COLORS
White Oak
samples of colors
American
Walnut
Classic
Walnut
Dark
Walnut
see pages 156-158
ADDITIONAL CHARGES (OPTION)
finishing with satin natural veneer – single leaf
133
Transoms
interior door frame
It is worth using modern and functional transoms to glaze the partition walls and obtain more light in the rooms.
They are an extension of the Porta SYSTEM door frames offer and use a similar production technology. Wide range of colors, quick
and simple assembly ensure the popularity of this offer. The transoms allow to divide the rooms without loss of light.
Independent
transoms
Dimension A: up to 1020 mm* - sizes „40” to „100” and double sizes which do not
exceed „90” (e.g. „60+30”)
Dimension B: up to 1021 mm* - size „110” and double sizes which sum if from „100”
to „220” (e.g. „60+40”)
* dimension in the clear
Details – see page 152 table 6.
REFERENCE DRAWING – WALL FIXING
Combined transoms
TRANSOM CONSTRUCTION
Size in th e
134
rabb et
AVAILABLE COLORS
Portadecor veneer
Grey
Euroinvest
CONSTRUCTION
Transoms include main beams (two horizontal and two vertical beams made of woodderived materials), set of glazing beads, main beam connectors and trims.
Transoms are manufactured and delivered to the Customer in the form of sets of elements
to be assembled on the site.

Beech
Bavaria
Oak*
Cherry tree
Walnut
Wenge
NEW
COLORS
Light Oak
Walnut
Verona2
Walnut
Verona1
Walnut
Verona3
DIMENSIONS
White
The range of transoms covers wall thicknesses between 75 and 300 mm.
• Transoms combined with the Porta System (p. 152, Table 6); standard height at the
rabbet is 270 mm. HO, HB, HZ + 302 mm – Porta SYSTEM door frame height.
• Independent transom sizes and heights available „40”, „50”, „60”, „70”, „80”, „90”, „100”
and „120”-”220”.
The maximum transom size is limited by the glass area which cannot exceed 3 m2.
* till stock-out
Portacortex veneer

NEW
COLORS
Bark 1
Bark 2
Super Matt veneer
Bark 3
FINISHING
The following veneers are used for transoms: Portadecor, Portacortex, Super Matt, Portadur,
PVC, HQ CPL and natural veneers. The veneer colours match the standard door leaf colours
offered by Porta KMI Poland.
Bark 4
NOTES

• Transom is not glazed. Recommended glazing thickness - 4÷6 mm.
• Transom should be installed only after the interior works are finished (e.g. wall paper and parquet
are in place).
NEW
COLORS
White
Portadur veneer
Walnut 2
PVC veneer

Walnut 3
Walnut 4
Walnut 5
Apple tree
Golden Oak
Walnut 6

Light beech
Alder
Oak
Walnut
HQ CPL veneer

White
Grey
Euroinvest
Beech Porta
Mahogany
Walnut
Oak
Milano 1
Oak
Milano 2
Oak
Milano 3
Oak
Milano 4
Oak
Milano 5
NEW
COLORS
White
Walnut
Walnut
Modena 1
Walnut
Modena 1
Standard natural veneer

Oak 1
Oak 2
Oak 3
Oak 4
Oak 5
Oak 6
Limba 1
Limba 2
Limba 3
Limba 4
Limba 6
Maple 1
Sapelli 3
Sapelli 4
Satin natural veneer
TRANSOM ADJUSTMENT RANGES
Sapelli 6
20 mm

NEW
COLORS
Bianco
Tabacco
Select natural veneer
Oak
Teak
Mocca
Nero

Minimum
Cherry
Rosewood
Wenge
Maximum
Ebony
NEW
COLORS
White Oak
samples of colors
American
Walnut
see pages 156-158
Classic
Walnut
Dark
Walnut
ADDITIONAL CHARGES (OPTION)
finishing with satin natural veneer – pro A x A and A x B
finishing with satin natural veneer – pro B x B
135
Angle-bar small and large
interior metal door frames
Zinc-coated or stainless steel (acid proof) door frames are the highest quality product which may be used wherever doors with
high resistance to fire, corrosion and weather are needed. With the automatic powder coating line, the sheet metal used for
production is ideally smooth and protected against corrosion. Additionally, wood-like PVC laminate cover meets high aesthetic
demands of the customers. Actually, theses door frames may be used in all types of rooms.
large
small
Angle-bar large folding
interior door frame made of stainless acid-resistant steel sheet
or PVC laminated steel sheetPCV.
136
AVAILABLE COLORS
Polyester paint
White
(RAL 9016)
CONSTRUCTION

Grey
(RAL 7047)
Cream
(RAL 1001)
PVC laminated steel sheet
Golden
Oak
Walnut
samples of colors
Brown
(RAL 8028)
Angle-bar metal door frames (small and large) are made of zinc-coated steel sheet 1.2 mm.
Door frames are available as universal design or left and right. Door frame profile width: 50
mm (small angle-bar) or 100 mm (large angle-bar). Door frames to be assembled are made
of brushed stainless steel (acid-proof) (100 mm profile) or zinc-coated steel sheet laminated
with wood-like PVC (80 mm profile). The door frames to be assembled are manufactured
and delivered as elements packed in a carton box for assembly on do-it-yourself basis.
FINISHING

Small and large angle-bar door frames made of zinc-coated steel sheet are painted with
powdered primer paints. Door frames to be assembled are made of stainless steel sheet
(acid-proof) (100 mm profile) or zinc-coated steel sheet laminated with woodlike PVC.
Mahogany
ACCESSORIES – INCLUDED IN THE DOOR FRAME PRICE
Large and small angle-bar as well as folding door frame for masonry walls:
• Two standard pintle hinges
• Three hinges for the frame of sizes „100” and „110”
• Allen wrench
• Circumferential rubber seal (brown, beige or grey)
• Mounting anchors (angle-bar small)
Angle-Bar large for gypsum-cardboard walls:
• Two standard pintle hinges
• Three hinges for the frame of sizes „100”
• Allen wrench
• Circumferential rubber seal (brown, beige or grey)
• Special anchor bolts for gypsum walls to make the assembly easier
see pages 156-158
DOOR FRAME SIZES (PAGE 150, TABLE 2)
• „60”, „70”, „80”, „90”, „100”, „110” 1 and „120” ÷ „200” 1
Door frame is the available in two versions:
• for setting on ready floor – level “0”,
• for cementing in the floor – level “-30”2
1
2
Dimensions not available for the folding frame made of acid-resistant steel.
Not available in folding PVC laminated door frame version.
EXAMPLES OF INSTALLATION
Angle-bar small
Assembly without additional
mounting anchors
ADDITIONAL CHARGES (OPTION) ANGLE-BAR LARGE
third hinge for the frames „60” – „90”
reinforcement for the self-closing device
stainless steel threshold (page 148)
installation dowels (Angle-bar large)
expanding the frame section from 110 to 150 mm
Angle-bar large,
assembly with dowels
Angle-bar large, assembly on
the gypsum-cardboard walls
expanding the frame section from 155 to 270 mm
expanding the frame section from 275 to 390 mm
137
ADJUSTABLE
interior metal door frame
Adjustable door frame made of zinc-coated sheet steel.
Width adjustment allows easy match with the desired wall width.
Actually, the adjustable door frame may be used in all types of rooms – at home, in the offices, hotels, industrial establishments
and wherever excessive humidity occurs.
Exterior side
Interior side
(round profile)
138
AVAILABLE COLORS
Polyester paint
White
(RAL 9016)

Grey
(RAL 7047)
samples of colors
CONSTRUCTION
Adjustable door frame is made of the highest quality galvanized steel sheet
1.5 mm thick.
The frame consists of:
• main beams: horizontal and two vertical
• architraves
• circumferential seal
• pintle hinges
Cream
(RAL 1001)
Brown
(RAL 8028)
see pages 156-158
FINISHING
Polyester powder paint in standard primer version.
ACCESSORIES – INCLUDED IN THE DOOR FRAME PRICE
•
•
•
•
•
•
Two standard pintle hinges
Three hinges for the frame of size „100” and „110”
Allen wrench
Circumferential rubber seal (brown or grey)
Expanding pins (for frames to be mounted in the masonry wall)
Self-tapping screws (for frames to be mounted in the gypsum cardboard walls)
DOOR FRAME SIZES (PAGE 150, TABLE 2)
• „60”, „70”, „80”, „90”, „100”, „110” and „120” ÷ „200”
Eight frame adjustment ranges.
For setting on ready floor – level “0”.
NOTES
• The door frames must be installed in rooms with completely finished walls (wallpaper for example)
and floors (wooden flooring for example).
WALL THICKNESS RANGE
A
95 ÷ 115 mm
B
120 ÷ 145 mm
C
145 ÷ 170 mm
D
170 ÷ 195 mm
E
195 ÷ 220 mm
F
220 ÷ 245 mm
G
245 ÷ 270 mm
H
270 ÷ 295 mm
EXAMPLES OF INSTALLATION IN DIFFERENT THICKNESS WALLS
ADDITIONAL CHARGES (OPTION)
wall thickness
adjustment
range
third hinge for the frames „60” – „90”
stainless steel threshold (page 148)
139
AGATE, OPAL
interior entrance metal frames
AGATE and OPAL door frames are intended for interior door leaves of the same name. Combination with the quality of Porta
entrance doors results in the doors of the highest technical and operational parameters.
METAL sliding door system
METAL on-wall system (no leaf) for sliding doors
Metal on-wall system (no leaf) for sliding doors is made especially for compartments with
a small surface, where mounting normal door is not practical.
140
AVAILABLE COLORS
Polyester paint
CONSTRUCTION
Metal door frame is made of both sides zinc-coated steel 1.2 mm (AGATE) or
1.5 mm thick (OPAL).

FINISHING
White
(RAL 9016)
samples of colors
Grey
(RAL 7047)
Cream
(RAL 1001)
Made from galvanized sheet - door frame painted with polyester powder paint
(in standard primer version).
Brown
(RAL 8028)
ACCESSORIES – INCLUDED IN THE DOOR FRAME PRICE – (AGATE)
see pages 156-158
• Three standard pintle hinges
• Allen wrench
• Circumferential rubber seal (brown, beige or grey color).
ACCESSORIES – INCLUDED IN THE DOOR FRAME PRICE – (OPAL)
•
•
•
•
•
Three standard pintle hinges
Allen wrench
Circumferential rubber seal (brown, cream or grey)
Six mounting dowels
Six hole plugs
DOOR FRAME SIZES (PAGE 151, TABLE 3)
• „80”, „90”, „100”
Door frame profile width: 100 mm.
Door frame is available in two versions:
• for setting on ready floor – level “0”,
• for cementing in the floor – level “-30”
EXAMPLES OF INSTALLATION
ADDITIONAL CHARGES (OPTION)
stainless steel threshold (page 148)
installation dowels (AGATE)
the frame section from 80 to 100 mm – free of charge
expanding the frame section from 101 to 150 mm
AGATE
Assembly without additional
mounting anchors
OPAL
Assembly with dowels
AVAILABLE COLORS
Polyester paint
expanding the frame section from 151 to 270 mm
expanding the frame section from 271 to 390 mm
CONSTRUCTION
Complete system consists of: large angle door frame installed onto a 100 mm wide wall made
in “tunnel” version (without hinges, lock and seal groove); rails with carriages; rail covers and
bumper beam. All elements are manufactured from galvanized steel sheets and delivered in
a cardboard box to be assembled on site.

FINISHING
White
(RAL 9016)
Grey
(RAL 7047)
Cream
(RAL 1001)
Brown
(RAL 8028)
Door frame, rail covers and bumper beam are painted with polyester powder.
ACCESSORIES – INCLUDED IN THE SET PRICE
samples of colors
see pages 156-158
• Self-adhesive brush seal
• Guiding element that stabilizes the door leaf vertically (to be mounted to the floor)
SET SIZES (PAGE 153, TABLE 7)
• „60”, „70”, „80”, „90” „100”.
The set is manufactured in the version for setting on ready floor – level “0” and available as
universal design (i.e. no left or right side) – once you decide whether the doors are to slide
left or right, you install the bumper strip on the chosen side.
141
PROJECT
interior entrance metal door frame fitted with veneered masking overlays
Door leaves of best technical parameters guaranteeing the highest level of safety and comfort of use most often come in sets
including a metal door frame. With increased interior aesthetics spaces fitted with this type of door in mind, we have added
a PROJECT door frame to complement our offer.
This door frame is adapted to fit with the AGATE, OPAL, QUARTZ, GRANITE, Rw=27 dB, Rw=32 dB, Rw=42 dB, EI 30, EI 60 door types.
Thanks to a specially designed metal piece profile it is easy to install the Porta SYSTEM overlays ensuring smooth and aesthetic
installation finish.
PROJECT DOOR FRAME PROFILE ILLUSTRATION
A
B
A
B
140 ÷ 345 mm
90 mm
AGATE, OPAL, QUARTZ, RW = 27 DB, RW = 32 DB 136 ÷ 341 mm
86 mm
GRANITE, EI 30
adjustment + 20 mm
* applies to door frame for EI 60 doors
142
30 mm
40 mm*
RW = 42 DB, EI 60
161 ÷ 366 mm
111 mm
AVAILABLE COLORS
PVC veneer
CONSTRUCTION
Complete PROJECT door frame consists of:
Metal angled door frame with pre-molded profile to fit the Porta SYSTEM overlays made
of galvanized steel plate 1,2 mm thick (AGATE), or 1,5 mm thick (OPAL, QUARTZ, GRANITE,
Rw=27 dB, Rw=32 dB, Rw=42 dB, EI 30, EI 60),
Special uncut Porta SYSTEM elements including one horizontal and two vertical beams and
sheathing strips made of imitation wood materials.
PROJECT door frame is produced and delivered to the client as a complete set of elements
for on-site assembly.

Light beech
Alder
Oak
Walnut
Apple tree
Golden
Oak
FINISHING
HQ CPL veneer
The metal part of the door frame is powder painted using primer paint in one of the
following colors: white (RAL 9016), grey (RAL 7047), brown (RAL 8028), cream (RAL 1001).
Porta SYSTEM overlays are covered using either of the following veneers: HQ CPL, PVC and
natural wood veneers.

ACCESSORIES – INCLUDED IN THE DOOR FRAME PRICE
White
Grey
Euroinvest
Oak
Milano 1
Beech Porta
Mahogany
Standard for the door frame type made to fit the leaf chosen.
Walnut
DOOR FRAME SIZES (PAGE 151, TABLE 3)
Oak
Milano 2
Oak
Milano 3
Oak
Milano 4
• „80”, „90”, „100”.
Possibility to order metal part of door frame in one of two options:
• for setting on ready floor – level “0”,
• for cementing in the floor – level “-30”
Oak
Milano 5
NEW
COLORS
White
Walnut
Walnut
Modena 1
Walnut
Modena 1
Standard natural veneer
NOTES:
• Minimum wall thickness means the lower range value – dimension „A”.
• The PROJECT door frame price equals the price of a standard metal frame included with the given
type of technical or entrance doors, increased by the price of the Porta SYSTEM overlay.
• A wall opening in the PROJECT door frame needs to be increased by S0 +25mm (+/-10) and
H0 +15 (+/-5) compared to standard dimensions of metal frames (see table 3, page 151).

Oak 1
Oak 2
Oak 3
Oak 4
Oak 5
Oak 6
Limba 1
Limba 2
Limba 3
Limba 4
Limba 6
Maple 1
Sapelli 3
Sapelli 4
Sapelli 6
Satin natural veneer

NEW
COLORS
Bianco
Mocca
Tabacco
Select natural veneer
Oak
Nero

Teak
Cherry
Rosewood
Wenge
Ebony
NEW
COLORS
White Oak
American
Walnut
samples of colors
Classic
Walnut
Dark
Walnut
see pages 156-158
Wall thickness range
B
140 ÷ 160 mm
C
165 ÷ 185 mm
D
185 ÷ 205 mm
E
205 ÷ 225 mm
F
225 ÷ 245 mm
G
245 ÷ 265 mm
H
265 ÷ 285 mm
I
285 ÷ 305 mm
J
305 ÷ 325 mm
K
325 ÷ 345 mm
NOTES!
Mentioned above wall thickness ranges concers completed PROJECT
door frames for GRANITE and EI 30 doors.
In AGATE, OPAL, QUARTZ, Rw=27dB, Rw=32dB the wall thickness range
must be minimized by 4 mm, in Rw=42dB and EI 60 must be increased
by 21 mm.
ADDITIONAL CHARGES (OPTION)
* finishing with satin natural veneer
143
Additional equipment – handles collection
Italian
design
LOGO
Italian
design
Metal handle with rosette
for regular key, for cylinder insert, bathroom lock
golden, silver
FLUO
Italian
design
Metal handle with rosette
for regular key, for cylinder insert, bathroom lock
golden, silver
NOVA
Italian
design
Metal handle with rosette
for regular key, for cylinder insert, bathroom lock
golden, mat golden, silver, mat silver
LINK
Italian
design
Metal handle with rosette
for regular key, for cylinder insert, bathroom lock
golden, mat golden, silver, mat silver
144
Additional equipment – handles collection
OFFICE
NOVELTY
Metal handle with rosette
for regular key, for cylinder insert, bathroom lock
golden, mat golden, silver, mat silver
NOVELTY
CARO
Metal handle with rosette
for regular key, for cylinder insert, bathroom lock
golden, mat golden, silver, mat silver
ARKADIA
MINIMAX
Metal handle (72)
for regular key, for cylinder insert, bathroom lock
Metal handle (72)
for regular key, for cylinder insert, bathroom lock
golden, silver, bronze
White
MINIMAX
EDEL
Metal handle (72)
for regular key, for cylinder insert, bathroom lock
Metal handle with rosette
for cylinder insert
made of acid-resistant steel
golden, silver
MINI
Plastic handle (72), black, for metal doors
for regular key and cylinder insert
145
Additional equipment – handles collection
PORTA GRANITE (class „C”)
Metal handle (72) (golden, titanic, bronze)
with standard holder
with „knob” holder
upper lock board
NOVELTY
PORTA OPAL (European 2nd class)
Metal handle (72) (golden, titanic, bronze)
with standard holder
with „knob” holder
upper lock board
NOVELTY
PORTA AGATE (European 1st class)
Metal handle (72) (silver, bronze)
with standard holder
with „knob” holder
upper lock board
146
Additional accessories
MASKING ARCHITRAVES
Straight architraves
Quarter round (2,15 m)
Straight architraves
VENTILATION
Ventilation sleeves I row (different colors)
Ventilation sleeves II rows (different colors)
Metal ventilation sleeves.
Available colors: golden, mat golden, silver, mat silver
Ventilation undercut
Ventilation grid to be placed
(different colors)
Ventilation slot
BULL’S EYES MADE OF ACID-RESISTANT STEEL
HINGES AND COVERS
Bull’s eye is available
only in door leaves
with chipboard core
in following types
of doors: MINIMAX,
Porta DECOR, HQ CPL
veneered, ENDURO,
Porta NOVA, Porta
LINE, Porta CLASSIC,
Nova NATURE, Nature
LINE.
Standard hinge*
* Extra charge for additional hinge in
wood-like door frame and door leaves.
Internal diameter is 250
mm for the wings of
„60” and „70”, and 300
mm for the others.
There is a transparent pane or safety mat with a thickness of 6 mm to
be chosen. Extra charge for bull’s eye.
„PRIME” hinges, retail sale:
Available colors: golden, mat golden, silver, mat silver.
Extra charge for third hinge in metal
zinc-coated door frame.
Cover for hinges for exterior doors
GDYNIA and WROCLAW
(set for one hinge).
Available colors: golden or silver.
Covers for standard hinges for interior doors
(set for one hinge):
Available colors: white, mat silver, chrome, golden
TRANSPARENCY OF GLASS PANES OFFERED FOR INTERIOR DOORS
„Chinchilla” type pane
MasterCarre type pane
„Ribbed” type pane
“Wave”, “square” type pane
(satin effect)
Mat type pane
147
Additional accessories
ADDITIONAL EQUIPMENT
Round flush handle for sliding doors
– included in the door price.
Available colors: silver (white doors)
and golden (all others).
Hook lock with side handles
(for sliding doors).
Available colors:
golden, mat golden, silver, mat silver.
Side handle for sliding doors.
Available colors:
golden, mat golden, silver, mat silver.
Self-closing device
Available colors: silver, bronze
Wide-angle
eye-viewer.
Available colors: silver
Stainless steel threshold for Porta door frames:
standard (90 mm), extended (120 mm),
in double doors:
standard (90 mm), extended (120 mm).
Two cylinder insert “B” class
Available colors:
silver, golden
Prepartion for shortening
(up to 60 mm)
ASSEMBLY AND OPERATION OF EXTERIOR DOORS
Reference drawing
CANOPY ROOF
The exterior doors need to be protected against direct sun rays and
precipitations – in order to do so the doors have to be mounted in
a recess or overhead canopies should be provided for the doors
mounted in walls without recesses. The canopy should extend beyond
the open door outline and ensure shade in the summer afternoons.
HEAT SOURCES
The distance between the door a heater should not be less than 150
mm
We recommend a non-heated anteroom.
ASSEMBLY
The door should be installed in the wall opening after the flooring is
finished and masonry works completed after the plaster is dry.
To preserve all advantages of WROCLAW and GDYNIA wooden doors
it is recommended to ensure periodical maintenance, i.e. 2 – 3 times
a year. Wipe the door surface with a humid soft cloth and coat with
a wood care agent (do not use alkaline solutions or solvents for this
purpose).
150 cm
safe distance
Reference drawing
148
The dimensions of the door assembly
ready floor
level
MINIMAX door frame
ready floor
level
Porta SYSTEM door frame
ready floor
level
ready floor
level
Porta SYSTEM ELEGANCE
door frame
with METAL angle-bar
door frame
ready floor
level
METAL sliding door system
ready floor
level
PRESTIGE door frame
Left doors
ready floor
level
Right doors
ready floor
level
PORTA SLIDING DOOR
SYSTEM
DOOR SIDES
NON-REBATED DOORS (PASSIVE AND ACTIVE DOOR LEAF)
passive leaf
e lea
ac tiv
COMPACT sliding door system
EDGE OF INTERIOR DOOR LEAF
f
LEGEND
see next page
149
Door sizes tables
LEGEND
SS –
total leaf width, including rebates
HB –
height of door frame, door trims excluded
HS –
total leaf height, including rebate
SZ –
total width of door frame, including door trims
DS –
thickness of door leaf
HZ –
total width of door frame, including door trims
width of wall opening ready for door frame setting
MS –
width of sliding door masking system
MG –
thickness of sliding door masking system
BG –
thickness of sliding door stop beam
S0 –
H0 –
height of wall opening ready for door frame setting, measured from the finished
floor level
OS –
clear width of the door frame (for ALPHA, BETA, OMEGA door models and for
wardrobe door the thickness of door leaves suspended on the door frame is
deducted from this dimension)
TS/W – permissible deviation from width/height of wall opening
SC –
width of wall opening ready for built-in cassette
OW – clear height of the door frame (for the doors with a threshold the height of
threshold is deducted for this dimension)
HC –
height of wall opening ready for built-in cassette (measured from the finished
floor level)
SB –
All dimensions – in millimeters [mm].
width of door frame, door trims excluded
POLISH STANDARD (PN)
INTERIOR DOORS WITH WOODEN DOOR FRAMES
OW
602
810
SB
HB
690
70
744
844
90
944
1010
902
990
1100
100
1044
1110
1002
1090
1200
60
618
680
602
646
787
70
718
780
702
746
887
40
910
802
890
1000
818
918
980
902
946
1087
100
1018
1080
1002
1046
1187
60
644
680
602
646
746
70
744
780
702
746
846
987
844
944
100
1044
1080
1002
1046
1146
110
1144
1180
1102
1146
1246
60
644
710
602
690
818
70
744
810
702
790
918
980
902
946
946
1046
844
944
1010
902
990
1118
100
1044
1110
1002
1090
1218
2075
2016
890
2038
80
40
802
2016
90
2030
910
2060
846
2039
80
40
802
2016
90
2030
880
2060
846
900
2060
80
40
802
790
2016
90
2017
880
2075
2060
1018
INTERIOR DOORS WITH METAL DOOR FRAMES
TYPE OF DOOR FRAMES
with door frames:
SMALL ANGLE-BAR
with door frames:
LARGE ANGLE-BAR
(for masonry walls)
with door frames:
LARGE ANGLE-BAR
(for plasterboard walls)
with door frames:
ADJUSTABLE
150
SIZE
SS
60
644
HZ
T S/W
800
80
2030
702
SZ
2115
2110
2088
2124
+20 /+10
710
OS
+20 /+10
H0
+20 /+10
S0
+20 /+10
with door frames:
PRESTIGE
(with adjustable)
644
DS
TABLE 2
HS
DS
S0
H0
650
OS
OW
596
750
SB
HB
629
70
744
844
90
944
950
896
929
986
100
1044
1050
996
1029
1086
60
644
675
596
656
686
70
744
775
696
756
786
80
844
875
796
856
886
2030
40
40
850
2055
796
2016
829
2046
886
944
1044
1075
996
1056
1086
110
1144
1175
1096
1156
1186
60
644
680
596
680
686
70
744
780
696
780
786
80
844
880
796
880
886
2055
2016
944
1044
1080
996
1080
1086
110
1144
1180
1096
1180
1186
60
644
700
596
680
716
70
744
800
696
780
80
844
90
944
100
1044
1100
996
1080
1116
110
1144
1200
1096
1180
1216
900
1000
2070
796
896
2016
980
2046
90
40
896
986
100
2030
980
956
786
2033
90
40
896
729
2016
100
2030
975
2045
880
980
HZ
T S/W
686
80
2030
696
SZ
986
2061
2061
±10 /±5
with door frames:
Porta SYSTEM
(with adjustable)
60
TABLE 1
HS
±10 /±5
with door frames:
Porta SYSTEM ELEGANCE
SS
2061
+10 /+5
with door frames:
MINIMAX 60 mm
MINIMAX 100 mm
MDF In natural veneer
SIZE
2076
–10 /–5
TYPE OF DOOR FRAMES
816
2058
916
1016
Door sizes tables
INTERIOR ENTRANCE AND TECHNICAL DOORS
HB
SZ
90
952
100
1044
80
868
GRANITE PS
90
968
100
1068
1115
1026
1104
60
644
680
602
646
746
70
744
780
702
746
846
Rw = 32 dB
with reinforced Porta SYSTEM
door frame
Rw = 42 dB
with reinforced Porta SYSTEM
door frame
Rw = 42 dB
with metal door frame*
EI 30
with MDF door frame
EI 30
Rw = 27 dB,
Rw = 32 dB
with metal door frame*
EI 60
with wooden door frame
EI 60
with metal door frame*
Metal doors EI 30
ENDURO
with swing version
door frame for
ENDURO doors
AQUA
985
2055
1075
45/47
1015
2000
996
915
2030
904
826
2060
926
964
2046
1056
904
2000
1004
1014
1010
2042
1110
80
844
944
980
902
946
1046
100
1044
1080
1002
1046
1146
60
644
680
602
646
746
70
744
780
702
746
846
40/44
880
2060
802
2016
846
2038
946
80
844
90
952
988
902
954
1054
100
1044
1080
1002
1046
1146
80
868
90
968
100
1068
2030
44/48
880
2060
915
2047
69
1015
802
2016
802
2080
1115
902
846
2038
872
2020
1002
972
946
1072
988
100
1088
60
70
80
844
90
952
1060
910
1030
1132
100
1044
1150
1002
1122
1224
60
644
675
596
656
706
70
744
775
696
756
806
890
810
2055
910
870
2015
970
950
2045
1050
1090
1010
1070
1150
644
750
602
722
824
744
850
702
822
80
844
90
952
100
60
2030
44/48
44/48
2030
950
2090
904
964
1014
1044
1075
996
1056
1106
668
775
627
747
858
70
768
875
727
847
80
868
90
968
60
668
70
768
80
868
90
968
1000
921
981
1031
60
700
695
640
673
730
70
800
795
740
773
80
900
90
1000
995
940
973
1030
100
1080
1075
1020
1053
1110
60
644
675
596
656
686
70
744
775
696
756
80
844
90
952
985
904
964
994
100
1044
1075
996
1056
1086
60
618
745
632
722
722
70
718
845
732
822
80
818
90
918
1045
932
1022
1022
100
1018
1145
1032
1122
1122
60
618
675
596
656
686
70
718
775
696
756
80
818
90
918
975
896
956
986
100
1018
1075
996
1056
1086
1075
2040
2030
2017
2017
61/65
53
40
40
40
800
900
895
875
945
875
2017
927
700
2030
827
2065
2055
2085
2055
721
821
840
796
832
796
2077
1047
621
2055
947
2043
1024
875
2090
856
2037
2016
2030
2016
781
881
873
856
922
856
906
2128
2068
958
2133
1058
1158
681
2013
2085
924
2077
985
975
2013
922
40/48
61/65
796
2014
40/44
2030
2055
802
2104
1168
888
990
2088
1068
80
69
2088
968
2056
90
2047
2108
1210
90
2030
2071
1106
+20 /+10
45/47
+20 /+10
Rw = 27 dB
with Porta SYSTEM
door frame
44/48
T S/W
±10 /±5
AGATE, OPAL,
QUARTZ,
GRANITE *
2030
HZ
906
+20 /+10
SB
856
+20 /+10
OW
±10 /±5
OS
796
+10 /+5
H0
±10 /±5
S0
875
±10 /±5
DS
40/44
731
2043
831
931
2068
830
2053
930
2080
786
2046
886
2061
822
2075
922
2075
2061
786
2046
886
* While using the PROJECT frame, the wall opening must be larger – S 0 by 25 mm and H 0 by 15 mm (results tolerance ± 10 mm / ± 5 mm).
±10 /±5
HS
±10 /±5
844
±10 /±5
SS
80
±10 /±5
SIZE
±10 /±5
TYP
TABLE 3
151
Door sizes tables
EXTERIOR DOORS
TABLE 4
SIZE
SS
HS
DS
S0
H0
OS
OW
SB
HB
SZ
HZ
T S/W
GDANSK
TYPE
80
807
2007
45
865
2070
783
2008
843
2058
893
2083
±10 /±5
GDANSK, SZCZECIN, TORUN
90
908
2007
45
965
2070
883
2008
943
2058
993
2083
±10 /±5
GDYNIA, WROCLAW
90
982
2049
68
1090
2120
920
2010
1060
2100
–
–
±10 /±10
GDYNIA + 1 side transom „30”
90+30
982
2049
68
1435
2120
920
2010
1404
2100
–
–
±10 /±10
GDYNIA + 2 side transom „30”
30+90+30
982
2049
68
1780
2120
920
2010
1746
2100
–
–
±10 /±10
±10 /±10
GDYNIA, WROCLAW
100
1082
2049
68
1190
2120
1020
2010
1160
2100
–
–
GDYNIA + 1 side transom „30”
100+30
1082
2049
68
1535
2120
1020
2010
1504
2100
–
–
±10 /±10
GDYNIA + 2 side transom „30”
30+100+30
1082
2049
68
1880
2120
1020
2010
1846
2100
–
–
±10 /±10
TYPE
ROMA doors
Premium
single
ROMA doors
Premium
double
ROMA doors
Standard
single
ROMA doors
Standard
double
SIZE
SS
80
868
90
968
100
1068
HS
DS
S0
H0
OS
940
2030
56
OW**
820
1040
2075
920
1140
SB
HB
920
2000
1020
1020
SZ
2066
1120
1050
130
1427*
1500
1379
1479
1509
1527*
1600
1479
1579
1609
150
1627*
1700
1579
1679
1709
160
1727*
1800
1679
1779
1809
170
1827*
56
2075
1900
2000
1779
1879
2066
1909
180
1927*
2000
1879
1979
190
2027*
2100
1979
2079
2109
200
2127*
2200
2079
2179
2209
80
868
90
968
900
100
1068
1100
2030
45
820
1000
2055
2000
980
1030
1020
1080
1130
1489
130
1427*
1460
1379
1439
1527*
1560
1479
1539
1589
150
1627*
1660
1579
1639
1689
1727*
170
1827*
2030
1760
45
1679
2055
1860
2000
1779
1739
1839
±10 /±5
2081
±10 /±5
2071
±10 /±5
2071
±10 /±5
930
2046
140
160
2081
2009
880
920
T S/W
1150
140
2030
HZ
950
2046
1789
1889
180
1927*
1960
1879
1939
1989
190
2027*
2060
1979
2039
2089
200
2127*
2160
2079
2139
2189
* The total width of the active and passive door leaves.
** Dimension reduced by the threshold height.
WARDROBE DOORS
SS
60
600
675
70
700
775
560
752
862
80
800
875
660
852
962
90
900
120
1200
HS
DS
2005
S0
H0
OW
460
975
30
OS
HB
652
760
2090
1275
SB
2030
940
952
1260
SZ
2075
1062
1370
140
1400
1475
1140
1460
1570
160
1600
1675
1340
1660
1770
180
1800
1875
1540
1860
1970
TYPE OF TRANSOM
Porta SYSTEM
double
152
2130
TABLE 6
S0/H 0
O S /H W
S B/H B
S Z/H Z
40
480
402
446
546
50
580
502
546
646
60
680
602
646
746
70
780
702
746
846
80
880
802
846
946
1046
T S/W
* the dimensions refer only to the transom height –
HZ height is equal to Hz of Porta System.
+20 / +20
height/weight
For double sizes not included in the Table, check
the dimensions sums and compare with the
corresponding dimension in the Table (e.g. for
80+50 the sum is 130, the dimensions are read for
70+60, and the sum is also 130).
90
980
902
946
100
1080
1002
1046
1146
110
1180
1102
1146
1246
00*
- /2022
- /1944
- /1988
- /2088
height/weight
S0/H 0
O S/OW
S B/H B
S Z/H Z
height/weight
S0/H 0
O S/OW
S B/H B
S Z/H Z
60+30
1020
937
981
1081
80+80
1720
1637
1681
1781
60+40
1120
1037
1081
1181
90+80
1820
1737
1781
1881
60+50
1220
1137
1181
1281
90+90
1920
1837
1881
1981
60+60
1320
1237
1281
1381
100+90
2020
1937
1981
2081
70+60
1420
1337
1381
1481
100+100
2120
2037
2081
2181
70+70
1520
1437
1481
1581
110+100
2220
2137
2181
2281
80+70
1620
1537
1581
1681
110+110
2320
2237
2281
2381
T S/W
+20 / +20
Porta SYSTEM
single
T S/W
762
TRANSOMS
TYPE OF TRANSOM
HZ
+20 / +10
OXFORD , GENEVA
TABLE 5
SIZE
T S/W
+20 / +20
TYPE
Door sizes tables
METAL sliding door system
(for plasterboard walls
PORTA sliding door system
ALU sliding door system
TYPE
OMEGA system
COMPACT sliding
door system – double
SB
HB
HZ
82
58
82
58
103
60
62
–
MG
BG
T S/W
–
–
–
–
SB
SZ
HZ
T S/W
1329
1429
2088
744
90
944
970
900
100
1044
1070
1000
2110
60
644
685
600
1310
70
744
785
700
1510
2030
870
40
2030
40
885
700
2055
2055
800
1510
2018
1710
2114
1910
80
844
90
944
985
900
100
1044
1085
1000
2110
60
644
680
602
1413
780
800
2018
2114
1710
1910
70
744
80
844
90
944
980
902
100
1044
1080
1002
2193
60
744
680
602
1448
1648
2030
40
880
702
2060
802
1613
2016
2119
1813
2013
70
844
780
702
80
944
880
802
90
1044
130
2 x 744
1420
1345
150
2 x 844
1620
1545
3277
170
2 x 944
1820
1745
3677
SS
2030
40
HS
980
DS
S0
2060
H0
680
902
OS
1848
2016
2114
2048
2877
OW
HZ
SZ
460
70
744
844
90
944
980
760
1046
100
1044
1080
860
1146
60
588
680
450
746
70
688
780
550
846
80
788
90
888
SIZE
SS
2 x 60
644
780
746
80
2000
880
40
1990
40
880
HS
DS
S0
744
844
2 x 90
944
1970
2 x 100
1044
2170
SS
644
H0
HS
30
DS
1770
S 0*
H 0*
670
650
OS
2016
946
2088
2088
946
1046
OW
HB
740
2060
OS
1529
1629
1729
1829
940
1929
2029
1040
2129
2229
840
OW
609
770
846
2016
640
1570
1956
660
750
1370
2 x 70
60
2070
980
2 x 80
SIZE
560
2060
1954
SB
2038
HB
664
HZ
T S/W
744
844
90
944
970
909
964
1053
100
1044
1070
1009
1064
1153
2 x 60
644
1290
1234
1278
1378
2613
2 x 70
744
1490
1434
1478
1578
3013
2030
40
870
1690
2075
2075
809
1634
764
SC
2018
2018
864
1678
853
2040
2040
953
2 x 80
844
2 x 90
944
1890
1834
1878
1978
1778
2 x 100
1044
2090
2034
2078
2178
HC
1355
70
40
709
SZ
753
80
2030
T S/W
+10 / +5
770
SZ
1310
2090
+10 / +5
COMPACT sliding
door system – single
OW
1555
1755
2128
1955
2155
2090
+10 / +5
TYPE
OS
600
844
644
TYPE
H0
70
60
BETA system
S0
670
80
SIZE
ALPHA system
DS
+10 / +5
METAL sliding door system
(for masonry walls)
HS
+20 / +10
644
+20 / +10
SS
60
+20 / +10
SIZE
+20 / +10
TYPE
TABLE 7
+20 / +10
SLIDING DOOR SYSTEMS, FOLDING DOORS
3413
2128
3813
4213
* For COMPACT sliding door system sizes S0, H0 mean size of wall opening without metal casing.
NOTES:
• Dimension tolerance in accordance with the Polish Standard (PN): up to 1 m: ± 1 mm, above 1 m: ± 2 mm.
• To work out the size S0 of double-leaf doors,
a) rebated doors: dimensions given in the table 1 must be added to the width of the second leaf or side panel (Ss dimension, rebated) – concerns to set with Porta SYSTEM
door frame and rebated doors:
to S0o size given in the table 1 (single rebated door leaf) must be added to the width of the second leaf or side panel (Ss dimension, rebated) and then obtained value
reduce by 10mm – concerns option with other door frames.
b) non-rebated:
to S0 size given in the table 1 (single non-rebated door leaf) must be added to the width of the second leaf (non-rebated )or side panel (Ss dimension, rebated), and then
increased by16 mm.
• Extensions available in natural veneer finish are offered as the „40” width, where SS=444, HS=2030.
• The frames are designed for installation on a finished, ready to use floor. Metal frames may be ordered 30 mm longer, to dip the ends in the floor concrete.
In such a case, the H0 and HZ dimensions must be increased by 30 mm (level „-30”).
• The inside door leaf dimension given in the table applies both to rebate and non-rebate leaves.
• Porta SYSTEM integrated with an upper light, dimensions H0, HB i HZ +302 mm.
• While using the PROJECT frame, the wall opening must be larger S0 by 25 mm and H0 by 15 mm (results tolerance ± 10 mm / ± 5 mm).
153
Door sizes tables
CZECH AND SLOVAK STANDARD (ČSN+STN)*/ GERMAN STANDARD (DIN)
INTERIOR DOORS
TABLE 8
with door frame:
Porta
SYSTEM ELEGANCE
(adjustable)
with door frame:
PRESTIGE
(adjustable)
with door frame:
SMALL ANGLE-BAR
with door frame:
LARGE ANGLE-BAR
(for masonry walls)
with door frame:
ADJUSTABLE
DOOR FRAME
90
948/985
715/680
40
915/930
OW
606/568
815/805
1985
OS
1015/1055
806/818
HB
694/657
706/693
2030
SB
906/943
894/907
HZ
904/892
2015
994/1032
1004/1017
1048/ –
1115/ –
1006/–
1094/ –
1204/ –
60
648/610
685/650
606/568
650/613
750/713
70
748/735
848/860
90
948/985
785/775
1985
40
885/900
706/693
2015
985/1025
806/818
750/738
1971
906/943
850/863
850/838
1993
950/988
950/963
1048/ –
1085 / –
1006/–
1050/ –
1150/ –
60
622/584
684/640
604/ 566
650/606
791/747
70
722/709
822/834
90
922/959
784/765
1972
40
884/890
704/691
2015
984/1015
804/816
750/731
1971
904/941
850/856
891/872
1994
950/981
991/997
1022/ –
1084 / –
1004/ –
1050/ –
1191/ –
60
648/610
715/680
606/568
694/657
822/785
70
748/735
848/860
90
948/985
815/805
1985
40
915/930
706/693
2030
1015/1055
806/818
794/782
1971
906/943
894/907
922/910
2015
994/1032
1022/1035
1048/ –
1115/ –
1006/–
1094/ –
1222/ –
60
648/610
654/615
600/561
633/594
690/651
70
748/735
848/860
90
948/985
754/740
1985
40
854/865
700/686
1995
954/990
800/811
733/719
1968
900/936
833/844
790/776
1985
933/969
890/901
1048/ –
1054/ –
1000/–
1033/ –
1090/ –
60
648/610
680/640
600/561
660/621
690/651
70
748/735
848/860
90
948/985
780/765
1985
40
880/890
700/686
2010
980/1015
800/811
760/746
1968
900/936
860/871
790/776
1998
960/996
890/901
1048/ –
1080/–
1000/–
1060/ –
1090/ –
60
648/610
704/665
600/561
684/645
720/681
70
748/735
80
848/860
804/790
90
948/985
1004/1040
900/936
984/1020
1020/1056
100
1048/ –
1104/ –
1000/–
1084/-
1120/-
40
904/915
700/686
2020
800/811
784/770
1968
884/895
2013
990/1026
100
1985
2013
990/1026
100
80
2079
1122/1160
100
80
2064
1091/1122
100
80
2043
1050/1088
100
80
2070
1104/1142
100
80
T S/W
804/767
794/782
1971
SZ
820/806
2010
920/931
+20 / +10
748/735
848/860
H0
+20 / +10
with door frame:
Porta SYSTEM
(adjustable)
70
80
S0
+20 / +10
648/610
DS
+20 / +10
with door frame:
MINIMAX 60 mm
MINIMAX 100 mm
MDF In natural veneer
60
HS
±10 / ±5
SS
±10 / ±5
SIZE
2028
–10 / –5
TYPE
HZ
T S/W
SS
80
848/860
90
948/985
100
1048/ –
SIZE
SS
60
644
HS
1985
DS
S0
40/44
880/890
44/48
980/1015
45/47
1080/ –
DS
S0
H0
OS
OW
800/811
2010
900/936
SB
HB
860/871
1968
1000/–
960/996
SZ
910/921
1998
1060/–
1010/1046
2023
1110/ –
ALPHA system
BETA system
OMEGA system
TYPE
COMPACT sliding
system – single
COMPACT sliding
system – double
744
844
90
944
680
40
880
OW
HZ
606/568
780
1985
OS
980
806/818
2074
906/943
1763
1044
1080
1006/-
2143
648/610
685/650
465/425
750/713
748/735
848/860
90
948/985
785/775
1952
40
885/900
565/550
2015
985/1025
665/675
2043
765/800
950/963
1048/ –
1085/ –
865/-
1150/ –
592/554
685/650
455/415
750/713
692/680
792/806
90
892/930
1945
40
785/775
885/900
2015
555/540
655/665
985/1025
755/790
1971
2043
850/838
950/963
648/610
1370/1275
644/606
1429/1337
2 x 70
748/735
1570/1525
744/731
1629/1587
2 x 80
848/860
948/985
2 x100
1048/ –
SIZE
SS
60
644
70
744
80
844
90
944
1911
30
1770/1775
2015
1970/2025
DS
S 0**
870
OS
809
1829/1837
HZ
SC
2045
1755
970
909
1955
2155
1044
1070
1009
644
1288
1234
2613
2 x 70
744
1488
1434
3013
1688
2030
1634
1973
2045
2 x 80
844
2 x 90
944
1888
1834
3813
3413
2 x100
1044
2088
2034
4213
* While using the PROJECT frame, the wall opening must be larger S0 by 25 mm and H0 by 15 mm (results tolerance ± 10 mm / ± 5 mm).
** For COMPACT sliding door system sizes S0, H0 mean size of wall opening in metal casing, ready for PVC door frame setting.
154
–
–
HC
BG
T S/W
2083
–
2083
–
1555
1973
100
40
–
1355
2 x 50
1985
–
2229/ –
OW
709
2030
–
2029/2087
609
770
40
2043
1044/-
H 0**
670
1985
1909
944/981
2170/ –
HS
844/856
T S/W
1050/1088
2 x 90
2 x 90
–
1050/1088
60
70
60
850/838
1971
100
80
98
1963
60
70
BG
1563
1971
100
80
MG
1363
706/693
2015
MS
+20 / +10
70
80
H0
+20 / +10
PORTA sliding door system
TABLE 10
HS
+10 / +5
TYPE
+10 / +5
SLIDING DOOR SYSTEMS
+20 / +10
AGATE, OPAL,
QUARTZ, GRANITE*
SIZE
+20 / +10
TYPE
±10 / ±5
INTERIOR ENTRANCE DOORS
Door sizes tables
CZECH AND SLOVAK STANDARD (ČSN+STN)
TRANSOM
TABLE 11.1
O S /H W
S B/H B
40
485
406
450
550
50
585
506
550
650
60
685
606
650
750
70
785
706
750
850
80
885
806
850
950
1050
Porta SYSTEM
single
TYPE OF TRANSOM
S Z/H Z
90
985
906
950
100
1085
1006
1050
1150
110
1185
1106
1150
1250
00*
- /1977
- /1899
- /1943
- /2043
* the dimensions refer only to the transom height
– HZ height is equal to Hz of Porta System.
For double sizes not included in the Table, check
the dimensions sums and compare with the
corresponding dimension in the Table (e.g. for
80+50 the sum is 130, the dimensions are read for
70+60, and the sum is also 130).
height/weight
S 0/H 0
O S/OW
S B/H B
S Z/H Z
height/weight
S0/H 0
O S/OW
S B/H B
S Z/H Z
60+30
1030
945
981
1081
80+80
1730
1645
1681
1781
60+40
1130
1045
1081
1181
90+80
1830
1745
1781
1881
60+50
1230
1145
1181
1281
90+90
1930
1845
1881
1981
60+60
1330
1245
1281
1381
100+90
2030
1945
1981
2081
70+60
1430
1345
1381
1481
100+100
2130
2045
2081
2181
70+70
1530
1445
1481
1581
110+100
2230
2145
2181
2281
80+70
1630
1545
1581
1681
110+110
2330
2245
2281
2381
Porta SYSTEM
double
T S/W
T S/W
T S/W
+20 / +20
S 0/H 0
+20 / +20
height/weight
+20 / +20
TYPE OF TRANSOM
GERMAN STANDARD (DIN)
TRANSOM
TABLE 11.2
Porta SYSTEM
single
SIZE
S0/H0
OS /Hw
SB/HB
SZ/Hz
SF/HF
50
525
444
488
588
468
60
650
569
613
713
593
70
775
694
738
838
80
900
819
863
963
90
1025
944
988
1088
100
1150
1069
1113
1213
00*
- /1977
- /1944
- /1943
- /2043
TS/W
+20 / +20
TYPE OF TRANSOM
* the dimensions refer only to the transom
height – HZ height is equal to Hz of Porta
System.
For double sizes not included in the Table,
check the dimensions sums and compare
with the corresponding dimension in the
Table (e.g. for 80+50 the sum is 130, the
dimensions are read for 70+60, and the sum
is also 130).
HUNGARIAN STANDARD (HUN)
TYPE
with adjustable
Porta SYSTEM door frame*
TABLE 12
SIZE
SS
70
715
80
865
90
965
HS
DS
S0
H0
750
2075
40
900
1000
OS
OW
673
2100
823
923
SB
HB
717
2061
867
967
SZ
HZ
T S/W
2133
+20 / +10
INTERIOR DOORS*
817
2083
967
1067
* chosen collections
155
AVAILABLE COLORS
Acrylic paint (interior)

Super Matt veneer

NEW
COLORS
White (RAL 9016)
Portadecor veneer
White

Grey Euroinvest
Beech Bavaria
Oak
Cherry tree
Walnut
Wenge
NEW
COLORS
Light Oak
Walnut Verona 1
Portacortex veneer
Walnut Verona 2
Walnut Verona 3
White

NEW
COLORS
Bark 1
Bark 2
Bark 3
Bark 4
Walnut 3
Walnut 4
Walnut 5
Walnut 6
Light beech
Alder
Apple tree
Golden Oak
White
„wood grains”
Oak
Walnut
Portadur veneer

Walnut 2
PVC veneer
156

AVAILABLE COLORS
HQ CPL veneer

White
Grey Euroinvest
Oak Milano 1
Oak Milano 2
Oak Milano 3
Oak Milano 4
Oak Milano 5
NEW
COLORS
Beech Porta
Mahogany
Walnut
White Walnut
Walnut Modena 1
Blue White Grey
White
Grey Euroinvest
Light yellow
Green
Beech
Apple tree
Mahogany
HPL veneer
Walnut Modena 2

Standard natural veneer

Oak 1
Oak 2
Oak 3
Oak 4
Oak 5
Oak 6
Limba 1
Limba 2
Limba 3
Limba 4
Limba 6
Maple 1
Sapelli 3
Sapelli 4
Sapelli 6
Satin natural veneer

NEW
COLORS
Bianco
Tabacco
Mocca
Nero
157
AVAILABLE COLORS
Select natural veneer

Oak
Teak
Cherry
Rosewood
Wenge
Ebony
NEW
COLORS
White Oak
American Walnut
Exterior water-based varnish venkovni
Walnut Classic
Dark Walnut

Oak 1
Oak 2
Oak 3
Oak 4
Oak 5 (Golden)
Limba 1
Limba 2
Limba 3
Limba 4
Limba 5 (złota)
Cream
(RAL 1001)
Brown
(RAL 8028)
Blue
(RAL 5005)
Polyester paint

White
(RAL 9016)
Grey
(RAL 7047)
Polyester paint
White
(RAL 9016)
Oak 6 (White)
Brown (RAL 8028)
PVC laminated steel sheet
Golden Oak

Walnut
Green
(RAL 6019)

Steel
Mahogany
Acid-proof
stainless steel
PORTA KMI POLAND S.A. reserve the rights to change without previous information the technology of production and construction of their products.
Any information provided in the catalogue shall not be considered an offer in the meaning of the Civil Code.
158
REFERENCE LIST
Golden Sands Resort, Mimoza Hotel
Prague, Shopping Centre Nový Smíchov
Katowice, „Chorzowska 50” office
Sopot, Sopocki Parkur 2 residential building
Warsaw, Olimpic Centre
Wroclaw, Silver Forum office
Warsaw, Babka Tower office
Gdynia, „Komandorskie Wzgorze” residential building
159
Authorised Distributors
AUSTRIA
Vienna EUGEN POPA KEG, tel.: +43 1 813 09 50, [email protected],
www.eugen-fenster.at
Vienna MINERALBAU - & DÄMMSTOFFE Handelsges.m.b.H, tel.: +43 1 258 3818 -15,
[email protected], www.mbd-baustoff.com
AZERBAIJAN
Baku MARKHAL-97, tel./fax: +994125102898, [email protected]
BELARUS
Minsk BELPRAKTIKA, tel.: +375 17 297 94 30, 297 94 35, 29 797 94 30,
[email protected], www.belpraktika.by
Minsk DVERI OPTOM ZAPAD, tel.: +375 29 390 90 90, +375 29 390 90 53,
+375 17 298 48 62, [email protected], www.portadoors.by
Мinsk ERILANT, tel.: +375 17 204 04 82, +375 17 256 11 12, +375 172 04 68 12,
[email protected], [email protected], www.erilant.by
Мinsk KAPITALSPECSTROY, tel.: +375 17 289 64 06, 289 66 07, 286 56 61,
[email protected], www.kss-by.com
Dhmos Palini, Gerakas, Melisia-Brilisia – Attiki KASIMATIS GIORGOS Co.,
tel.: +30 210 810 2032, fax: +30 210 609 6368, [email protected], www.portadoors.net
Dhmos Anthoysas – Spata – Glyka Nera – Pallini, NTIKAS GEORGIOS Co.,
tel.: +30 210 663 5587, fax: +30 210 663 0445, [email protected]
Dhmos Chalkidas – Evia – Central Greece VIDALIS BROS O.E.,
tel.: +30 2221084172, +30 2221084049, [email protected]
HUNGARY
Budapest WOODCOTE HUNGARY Kft., tel.: +36 1 309 73 66, fax: +36 1 309 73 69,
[email protected], www.woodcote.hu
Budapest WOODCOTE HUNGARY Kft., tel.: +36 1 456 1010, fax: +36 1 215 5894;
[email protected], www.woodcote.hu
Budapest WOODCOTE HUNGARY Kft., tel.: +36 1 257 6852, fax: +36 1 257 6852
[email protected], www.woodcote.hu
Budapest ALLhouse Kft., tel.: +36 1 786 9090, [email protected], www.allhouse.hu
Budapest TREND-DOOR Kft., tel.: +36 1 413 01 36, [email protected],
www.ajtoszalonok.hu
BULGARIA
Budapest FAGEP Kft., tel.: +36 120 57 989, fax +36 14 64 3178, [email protected]
Burgas „501doors” showrooms of Ralica Furniture Houses PLC, tel.: +359 56 841870;
+359 888 667 228, [email protected], www.501doors.com
Budapest FAGEP Kft., tel.: +36 12 22 4011, fax +36 12 23 1918
Pleven Temira Ltd., tel.: +359 64 803 457, mobile: +359 888 154 562,
[email protected], www.temira.com
Debrecen, ALLhouse Kft., tel.: +36 20 938 4831, [email protected], www.allhouse.hu
Plovdiv Archcenter-A Ltd., BAUZENTRUM, tel.: +359 32 969 594,
[email protected], www.bauzentrum-a.com
Sofia „501doors” showrooms of Ralica Furniture Houses PLC,
tel.: +359 287 87937, +359 287 87952, +359 886 008 884, [email protected],
www.501doors.com
Sofia Archcenter-A Ltd., BAUZENTRUM, tel.: +359 2 979 45 60,
[email protected]
Sofia Arcoma Bulgaria Ltd., tel.: +3592 483 01 54, +359 889 982 187, +359 885 934 497,
[email protected], www.arcoma-bg.com,
Sofia Stroitelni Sistemi Nitera Ltd., tel.: 02 925 22 75, [email protected],
www.niteragroup.com
Sofia Temira Ltd., tel.: +359 2 973 28 81, +359 2 973 26 83 +359 2 978 11 09, vrati@temira.
com, [email protected], www.temira.com
Targovishte Temira Ltd., tel.: +359 601 622 14, +359 886 301 766,
[email protected], www.temira.com
Varna „501doors” showrooms of Ralica Furniture Houses PLC, tel.: +359 52 641020, +359 52
556633; +359 888 803 533, + 359 887 763 492, [email protected]; www.501doors.com
Veliko Tarnovo „501doors” showrooms of Ralica Furniture Houses PLC,
tel.: +359 626 46400, +359 62 606000, +359 888 662 885, [email protected], www.501doors.com
Budapest FAGEP Kft., tel.: +36 12 53 5350, fax +36 12 53 53 49
Mosonmagyaróvár, WOODCOTE HUNGARY Kft., tel.: +36 96 555 558, fax: +36 96 555 559,
[email protected], www.woodcote.hu
Mosonmagyaróvár TREND-DOOR Kft., tel.: +36 96 571 250, centrum@ajtoszalonok.
hu,www.ajtoszalonok.hu
Nyíregyháza, BANYCS Kft., tel./fax: +36 42/460-167, +36 42/460-167, +36 70/394-6532;
+36 30/218-2837, [email protected], www.ajtok-vilaga.hu
Nyíregyháza, OPEN DOORS Kft, tel./fax: +3642 460 249, +36 20 252 4041,
[email protected], www.open-doors.hu
Pécs, SZINKRÓN Kft., tel.: +36 72 510 930, +36 72 512 710, [email protected],
www.szinkron.hu
Szeged, WOODCOTE HUNGARY Kft., tel.: +36 62 543 703, fax: +36 62 543 707,
[email protected], www.woodcote.hu
Szeged, PERFECT HOUSE Kft., tel.: +36 62 319 504,06 30-8545833,0630-8545801,
[email protected]
Zalaegerszeg, WOODCOTE HUNGARY Kft., tel.: +36 92 511 984, fax:+36 92 511 985,
[email protected]
ITALY
Rome, GIANT EDILIZIA, [email protected]
CROATIA
LATVIA
Zadar Dom-Artis, tel.: +385 23 27 44 27, [email protected], www.domartis.hr
Riga AKB BŪVE, tel.: +371 7465137, [email protected], www.akb-PROJECTs.lv
CZECH REBUBLIC
LITHUANIA
Holovousy SVARTES, s.r.o., tel.: +420 493 620 210, [email protected],
www.svartes.cz
Vilnius DURYS LUX Salonas, UAB MORITA, tel.: +370 52324488, [email protected],
www.duryslux.lt
Mladá Boleslav MB INTERIERY s.r.o., Michal Brzobohatý, tel.: +420 326 726 333,
[email protected], www.mbinteriery.cz
Vilnius E-DURYS Elektroninė Durų Parduotuvė, tel.: +370 65066658, [email protected],
www.e-durys.com
Planá nad Lužnicí ATEX PLANÁ, s.r.o., tel.: +420 381291318, [email protected],
www.atex-plana.cz
Vilnius UAB FAUGA, tel.: +370 52721480, [email protected], www.durucentras.lt
Praha ROVEL CZ, s.r.o., tel.: +420 234 676 401, [email protected], www.rovelcz.cz
Marijampole UAB MORITA, tel.: +370 34397516, [email protected], www.morita.lt
Praha WOODCOTE CZ, a.s., tel.: +420 226 539 146/147, [email protected],
www.woodcote.cz
Kaunas UAB MORITA, tel.: +370 37351597, [email protected], www.morita.lt
Šumperk BROUK CENTRUM, s.r.o., tel.: + 420 583 222 444, [email protected],
www.podlahybrouk.cz
MACEDONIA
ESTONIA
Tallinn MOSTORIONA OU, tel.: +372 7122395, [email protected], www.doors.ee
FRANCE
Haguenau EURO-PORTES, tel.: +33 03 88 07 13 81, [email protected],
www.euro-portes.fr
Piblange TUÉ JEAN-CLAUDE, tel.: +33 03 87 21 39 59, [email protected],
www.portes-interieures.com
GERMANY
Düsseldorf PR BAUELEMENTE OHG, tel.: +49 4231 94312, [email protected],
www.tuerenstudio.eu
160
Dhmos N. Makrhs – Attiki CHRISTINA MOUCHTARI Co., tel.: +30 229 406 9080,
fax.: +30 229 406 9082, +30 694 60 60 345, [email protected], www.polydec.gr
Vilnius UAB MORITA, tel.: +370 52788680, [email protected], www.morita.lt
Skopije Duo IMPEX, tel.: +389 70 245 527, [email protected]
MALTA
Birkirkara QUADRA, tel.: +356 25461000, [email protected], www.quadra.com.mt
NORWAY
Bergen, EIENDOM VEST AS, tel.: +47 41 15 73 57, [email protected]
OMAN
Muscat-South Alkhuwair, Barka-New Home For World Projects LLC, tel.: 00968 26882051,
[email protected], www.newhomeoman.com
ROMANIA
Engelskirchen, AS-BAU GmbH, tel. +49 2263 968 279-0, [email protected],
www.as-bau-nrw.de
Alba-Iulia FLORIDA CONSTRUCT, tel.: 0258 823 333,0258 823 334, 0788 823 333,
0788 224 727, [email protected], [email protected],
www.floridaconstruct.ro
Solingen, WOHNSTYLE NOLD, tel.: +49 212 22 65 757, [email protected]
www.wohnstyle-nold.de
Alba -Iulia DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Verden/Aller FENSTER BÖRSE VERDEN GmbH, tel.: +49 4231 98 580,
[email protected], www.zimmertueren24.de
Arad WOODCOTE ROMANIA, tel.: 0257 256 804, 0726.695.762, fax: 0257.256.804,
[email protected], www.woodcote.ro
GREECE
Arad DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Agent of Porta DOORS MAKATSORIS Co., tel.: +30 801 11 76782, fax: +30 2106664980,
[email protected], www.porta.com.gr
Arad EDIL HOME, tel.: 0357 445 435 , 0723 919 468, [email protected],
[email protected], www.usiedil.ro
Dhmos Koropiou – Attiki CLASSICTHERM / Kakoulis Dimitrios, tel.: +30 22910 78930,
fax.: +30 22910 78931, [email protected]
Arad EXCLUSIVE AMBIENT, tel.: 0740 863 888, [email protected],
www.exclusiveambient.ro
Dhmos Moshato KASIMATIS GIORGOS Co., tel.: +30 210 9480450, fax: +30 210 9480319,
[email protected], www.portadoors.net
Bacău DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Authorised Distributors
Baia Mare DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Slatina DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Bistriţa FRANCESCA COMSERV SRL, tel.: 0263 234 115, 0722 555 661,
[email protected]
Sibiu AVI, tel.: 0269 248 080, 0727 200 101, [email protected], [email protected], www.avi-f.ro
Bistrita-Nasaud DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539,
[email protected], www.dedeman.ro
Botosani DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Braila DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Brasov DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Brasov RETCO, tel.: 0268 417 714, [email protected], www.retco.ro
Bucureşti ARABESQUE, tel.: 031 405 65 36, 0747 493 318, [email protected],
www.arabesque.ro
Bucureşti AX PERPETUUM, tel.: 0743 098 447, [email protected],
www.perpetuum.ro
Bucuresti DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Bucureşti PORTA BRAND B&M, tel.: 037 117 85 53, 0724 311 437, 0752 116 317,
fax: 037 117 85 53, [email protected]; www.usi-porta.ro
Bucureşti PRO-DIAS EXPERT DESIGN, tel.: 021 311 56 58, 021 300 29 08, 0726 711 355,
[email protected]
Bucureşti REI PRODIMEX, tel.: 021 410 87 88, 0726 388 601, [email protected],
www.reiambient.ro
Bucureşti WOODCOTE ROMANIA, tel.: 021.369.5775, 0727.810.771, fax: 021.369.5775,
[email protected], www.woodcote.ro
Buzau DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Buzău PICO DO PRODEXIM, tel.: +40 238 723 188, [email protected]
Craiova DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Sibiu FLORIDA CONSTRUCT tel.: 0788 823 333, 0788.239.224, 0269 244 711, 0761 322 897,
[email protected]
Suceava DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Suceava REVINE IMPEX, tel.: 0767 563 235, [email protected],
Targu Jiu DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Targu Mures DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Targoviste DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Targu Mures PLATINUM CORPORATION, tel.: 0744 796 442, 0365 816 900,
[email protected]
Timisoara DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Timisoara, FILER IMPEX, tel.: 0722 596 030 [email protected]
Timisoara GESO GROUP, tel.: 0256 210 217, 0744 763 516, 0740 580 599
[email protected], www.geso.ro
Timisoara EDIL HOME, tel.: 0723 919 468, 0356 117 835 [email protected],
[email protected], www.usiedil.ro
Timisoara EUROBAC, tel.: 0256 215 127, [email protected]
Tulcea DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Turda AGROLIV, tel.: 0264 314 501, 0729 636 342, [email protected]
Vaslui DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Zalau MULTICOM, tel.: 0260 606 122, 0260 606 123, fax: 0260 615 508,
[email protected]
Cluj AGROLIV, tel.: 0264 314 501, 0729 636 342, [email protected]
RUSSIA
Cluj AX PERPETUUM, tel.: 0740 018 047, [email protected],
www.perpetuum.ro
Moskwa ETALON, tel.: +8 495 95 3 17 76, [email protected]
Cluj Napoca DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Moscow ROSPROOF, tel.: +7 495 933 75 63, [email protected], www.rosproof.ru
Cluj WOODCOTE ROMANIA, tel.: 0264 415 373, 0727 734 697, fax: 0264 415 535,
[email protected], www.woodcote.ro
Cluj INDY GO, tel.: 0723 505 938, 0264 265 065, 0264 403 535, [email protected],
www.indygo.ro
Comanesti DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Constanta FIVE – HOLDING, tel.: 0241 588 899, 0241 588 933, [email protected],
[email protected]
Constanta LUXOR, tel.: 0723.313.248, [email protected]
Constanta DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Craiova CASA NOASTRA, tel.: 0251 429 532, 0729330644, www.casanoastra.ro
Craiova EUROCASA, tel.: 0753 100 251, 0251 506 199, 0251 506 200, fax: 0251 506 200,
[email protected], www.usieurocasa.ro
Deva QUASAR INDUSTRIES, tel.: 0254 206 293, 0722 228 451, [email protected],
www.quasar.ro
Deva SIMAL EXIM, tel.: 0254 230 630, 0723 696 696, fax 0254 224 550, [email protected],
www.simal.ro
Deva R&G INDUSTRIES, tel.: 0254 236 244, 0254 231 845
Drobeta Turnu Severin DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539,
[email protected], www.dedeman.ro
Focsani DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Galati ROMDECOR, tel.: 0236 470 407, 0743 098 742, 0236 470 025, 0742 038 420,
[email protected], [email protected]
Iasi DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Livezeni (jud. Mures), BTM DISTRIBUTION, tel.: 0728 606 061, 0728 606 066,
[email protected]
Onesti DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Oneşti SEPHARD CASA, tel.: 0040 34 31 01 05, [email protected]
Oradea DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Moscow ELITEL, tel.: +7 495 779 12 76, [email protected], www.elitel.ru
St-Petersburg SMART-COMPANY, tel.: +7 812 644 41 60 [email protected],
www.smart-company.ru
Kaliningrad PARTNERS, tel.: +7 911 470 80 62, [email protected]
St-Petersburg SMART-COMPANY, tel.: +7 812 644 41 60, [email protected],
www.smart-company.ru
Smolensk VEGA AVANGARD, tel.: +7 4812 66 07 03, 38 75 24, [email protected],
www.vegadveri.ru
UKRAINE
Kiev PORTA KMI UKRAINA Ltd, tel.: +38 044 566 04 24, fax +38 044 576 42 20,
[email protected], www.porta.com.pl
SERBIA
Novi Belgrad D.O.O <<PORTA DOORS>> BEOGRAD, tel.: +381 113 089 909,
+381 113 089 910, [email protected], www.portadoors.rs
SLOVAKIA
Bratislava DVERE.EU, s.r.o., tel.: +421 905 277 505, [email protected], www.dvere.eu
Bratislava WOODCOTE Slovakia, s.r.o., tel.: +421 249 105 041, [email protected],
www.woodcote.sk
Galanta ROYAL ARCHITECTURE, s.r.o., tel.: 421 31 780 57 63, [email protected],
www.royaldesign.sk
SLOVENIA
Celije, SEZAMY doo, 03 490 36 20, [email protected], www.sezamy-sp.si
SPAIN
Calvia (Bugadellas) ECCOWIN SERVICIOS REUNIDOS S.L., tel.: +34 971696434,
[email protected], www.eccowin.com
Santa Ponica (Baleares) MARTERM MALLORCA S.L., tel.: +34 971693262,
[email protected], www.marterm.com
SWITZERLAND
Biasca INTONEDIL S.A., tel.: +41 918634711, [email protected]
Oradea EUROBAC ROMANIA, tel.: 0259 415 811, 0744 778 779, [email protected],
[email protected], www.eurobac.ro
Oradea PROGES, tel.: 0259 406 290, [email protected], www.proges.ro
Piatra Neamt DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Piatra Neamt IMPACT DISTRIBUTION, tel.: 0233 228 625, 0726 746 182,
[email protected]
Rm. Valcea DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Roman DEDEMAN, tel.: 0234 525 525, fax: 0234 581 539, [email protected],
www.dedeman.ro
Satu-Mare BIZMANN, tel.: 0726 376 984, [email protected]
Sebes FLORIDA CONSTRUCT, tel.: 0788 823 333, 0258 823 333, 0258 733 070,
[email protected]
PORTA KMI POLAND Sp. z o.o. reserve the rights to
change without previous information the technology
of production and construction of their products.
Any information provided in the catalogue shall not be
considered an offer in the meaning of the Civil Code.
161
w w w. p o r t a d o o r s .c o m
PORTA KMI Poland Sp. z o.o.
Po r t a
P r o d u c t s
C a t a l o g u e
S z k o l n a s t r. 2 6 , 8 4 - 2 3 9 B o l s z e w o , P o l a n d
phone: +48/58 677 81 00, fax: +48/58 677 81 99, e-mail [email protected]
P O R TA’s f a c to r i e s
P O R TA d e a l e r s n e t w o r k
Por ta Products
CATALOGUE
www.por tadoors.com
www.portadoors.com
Druk PORTA 299/10. Zlecenie 2010-3924-MP Data 10.02.2011