docVision AutoFilter Changer
download 
Report Transcription
Vision AutoFilter Changer
Filter Management Vision® AutoFilter™ Changer The Vision AutoFilter automatically introduces filters into the fluidic path, removes them if desired, and returns them to position or discards them – all of which is completely programmable. Filtered Sampling The Vision AutoFilter is a filter changer that automatically introduces 25 mm syringe filters into the fluidic path of your dissolution samples. Designed as a seamless addition to Hanson’s Vision family of quality test equipment, the Vision AutoFilter brings a new approach to automated filter changing. It allows you to increase the life of your filters by allowing fluidic steps to take place with or without a filter. There are almost no limitations to the Vision AutoFilter– you decide what works best for your method. Patent pending. The Vision AutoFilter not only saves you money on filters, but also saves you time by eliminating the need for you to manually disconnect and reconnect fluidic lines. You command whether the Vision AutoFilter operates without filters during sampling, or whether it filters from 6, 7, or 8 lines of samples. 99-310-047 Rev. 2-14 Filterless Sampling Filter Management Vision AutoFilter Changer Vision AutoFilter Changer Features & Benefits • Filters 6, 7, or 8 samples simultaneously • Color touchscreen • Automatic insertion and removal of filters from fluidic path • Intuitive menus and programming • Compatible with a variety of 25 mm syringe filters • Serial and PostScript-capable network printing • Supports automation-compatible filters • Front-facing filter positioning for easy visual verification of filters • 32-bit digital technology • Comes standard with both 18-filter and 25-filter stack tubes • Catch bin drawer for discarded filters • Customizable filter capacity (the ceiling is the limit!) • Elegant, ergonomic design with workhorse performance • Pull-through or push-through system configuration capability • 21 CFR Part 11 security compliant • User can create, manage, and save up to 100 protocols • USB drive to save and transfer protocols • User-defined alarms for sampling, maintenance, and calibration 1 Dissolution Tester • USP, FDA, ASTM, and JP compliant • CE, CSA, WEEE and RoHS compliant • Earth-friendly packaging Collector Vision AutoFilter Changer Autosampler Pull-Through Configuration Collector Up to 3 Dissolution Testers Vision AutoFilter Changer Autosampler 99-310-047 Rev. 2-14 Push-Through Configuration Filter Management Vision AutoFilter Changer How Does the Vision AutoFilter Changer Compare? Agilent 808 Vision AutoFilter Filterless sampling No Yes Multiple filter use Twice Only Infinite Automation-compatible filters Yes Yes Non-automation-compatible filters No Yes Compatible with other autosampler brands No Yes Network printing No Yes Alarms for sampling, maintenance, and calibration No Yes Removes filters from fluidic path No Yes Returns filters to fluidic path No Yes Filterless rinsing No Yes Filtered rinse Yes Yes Automatic power switching (115 V to 230 V) No Yes Customizable filter capacity No Yes Static Switchable Transfer and save protocols via USB No Yes Metal in fluidic path Yes No Compatible with on-line sample dilution No Yes 6, 7, or 8 sampling configuration Vision Family Features & Benefits Take advantage of the Vision AutoFilter’s full potential. Advanced Vision-exclusive features can only be used when the Vision AutoFilter operates in conjunction with the Vision family of quality test equipment—an Elite 8 or Classic 6 dissolution tester, an AutoPlus autosampler, and an AutoFill collector. • Simultaneous use with 1, 2, or 3 Vision dissolution testers • Rinse with or without filters • Sample dilution option • Rinse retrieval option • Full test reporting • Firmware and fluidic design to overcome problem filters and media • Reuse filters as many times as desired • Back-flushing option • Media replacement option (for up to 2 Vision dissolution testers) Vision Dissolution Testing Family 99-310-047 Rev. 2-14 • Pre-filtering option Filter Management Ordering Information 25 mm Syringe Filters The Vision AutoFilter Changer comes with everything needed to interface with Hanson Vision dissolution instruments and the Vision AutoPlus autosampling system. The Vision AutoFilter Changer is designed to accommodate many industry-standard 25 mm syringe filters, including: Filter Stack Tubes are included (both 18- and 25-filter capacity) to pre-stack syringe filters for automatic unattended operation during dissolution tests. Filters are sold separately. • Hanson p/n 91-450-062 Filters, In-Line, 5 micron (75/pk) • Millipore Millex® Syringe Filter & Automation Compatible Filter • Pall Acrodisc® Syringe Filter & Automation Certified Filter • VWR® International Syringe Filters Vision AutoFilter Changer p/n Description 43-101-008 Vision AutoFilter Changer 43-108-005 Q-Pak IQ/OQ/PQ Validation Guidelines, AutoFilter Vision AutoFilter Changer (shown with 18-filter stack tubes) Vision AutoFilter Changer (shown with 25-filter stack tubes) 99-310-047 Rev. 2-14 Filters should be validated for suitable use and performance per customer SOP and protocol.
