Refrigeration Products

LK-CC
April 2007
(Replaces LK-04, 08/04)
Refrigeration Products
Condensed Catalog
© 2007, Heatcraft Refrigeration Products LLC
Table of Contents
Reach-in Evaporators
Beacon II™
Model TA Thin Profile Air Defrost.............................................. 4
Model TL Thin Profile Electric Defrost.................................... 4
Model C High Profile Air Defrost............................................... 5
Model VA V-Profile Air Defrost................................................... 5
Model BB Back Bar......................................................................... 6
Model KMK Standard Mullion.................................................... 6
Model RAMK Reverse Air Mullion............................................. 6
Model BTO Twin Flow................................................................... 7
Model U Dual Air............................................................................ 7
Models LTA, LTL Extended Thin Profile Unit Cooler............ 7
Beacon II™ Refrigeration System.............................................20
Walk-in Evaporators
Model LCA Compak....................................................................... 8
Model LCE Compak........................................................................ 9
Model LCH Compak....................................................................... 9
Model LFA Low Velocity.............................................................10
Model LFAE Low Velocity...........................................................10
Model LFAH Low Velocity..........................................................11
Model LWA Low Air Flow...........................................................11
Model LWE Low Air Flow...........................................................12
Model LWG Low Air Flow...........................................................12
Model ACM Center Mount........................................................13
Model ECM Center Mount........................................................13
Model MMT6 Medium Profile..................................................14
Model MLT6 Medium Profile....................................................14
Model MLT4 Medium Profile....................................................15
Model MLG6 Medium Profile...................................................15
Model MLG4 Medium Profile...................................................15
Warehouse Evaporators
Model LHA Warehouse . ............................................................16
Models LHE, LHL Warehouse....................................................17
Models LHG, LHF Warehouse...................................................18
3
PRO
3
PRO Packaged Refrigeration System....................................21
Condensing Units
Model LS 1/2-5 HP Semi-Hermetic Air-Cooled..................22
Model LH 1/2-5 HP Hermetic Air-Cooled.............................23
Model LZ 2-6 HP Scroll® Air-Cooled.......................................23
Model LD 3-22 HP Discus® Outdoor......................................24
Model LZ 3-22 HP Scroll® Outdoor.........................................24
Model LDV 12-40 HP Outdoor.................................................25
Model LDD 24-80 HP Dual Compressor Outdoor.............26
Model HWN 1/2-6 HP Hermetic Remote Water-Cooled.....27
Model ZWN 1/2-6 HP Scroll® Remote Water-Cooled.......27
Model SWN 3/4-20 HP Indoor Water-Cooled.....................28
Model SRN 3/4-20 HP Remote Indoor..................................29
Model LRI 3/4-30 HP Reed Indoor..........................................30
Model LDI 3/4-30 HP Discus® Indoor.....................................31
Air-Cooled Condensers
Model LNE Solus Series..............................................................32
Models LNQ, LNX Altus Series..................................................33
Models LNL, LNH Altus Series..................................................34
Model FCB 1-26 Ton Direct-Drive...........................................35
Fluid Coolers
Model PFG Direct-Drive.............................................................36
More Technology & Products
FlexPack™........................................................................................37
ServiceMate™.................................................................................37
Energy Solutions®.........................................................................37
Ripening Room Evaporator
Model LPR Ripening Room.......................................................19
Reach-in Evaporators
Thin Profile Air Defrost Unit Coolers
Model TA is a thin unit that mounts in the top of a refrigerator, making the entire top shelf
area usable. The attractive low silhouette makes this reach-in evaporator particularly desirable
for display-type refrigerators. It can also be used in back bars, under counter cabinets or
wherever space is at a premium.
Drain fitting at 45°F angle so drain can be run through the back or bottom of the
refrigerator. Room for expansion valve inside so that it is out of sight. Model TA
is available with an optional protective coil coating for corrosion protection
(use model designation TAK). Also features sweat inlet connection to reduce leaks.
Dimensions
(in.)
Motor
TA
Model
BTUH
10°F
TD
CFM
TA10
TA13
TA17
TA23
TA30
TA43*
TA55*
1,000
1,300
1,700
2,300
3,000
4,300
5,500
120
170
210
330
360
540
650
115/1
208-230/1
Qty.
Total FLA Total FLA
1
2
2
3
3
4
5
0.8
1.6
1.6
2.4
2.4
3.2
4.0
0.4
0.8
0.8
1.2
1.2
1.6
2.0
Connections
(in.)
L
H
D
16-1/2
20-1/2
24
31-5/8
40
53-3/8
53-3/8
4-1/2
4-1/2
4-1/2
4-1/2
4-1/2
4-1/2
6-3/4
13-1/2
13-1/2
14-1/2
14-1/2
14-1/2
14-1/2
14-1/2
Liquid
OD
3/8
3/8
3/8
3/8
3/8
1/2
1/2
Suction
ID
3/8
3/8
3/8
3/8
1/2
5/8
5/8
Drain
OD
1/2
1/2
1/2
1/2
1/2
1/2
1/2
Approx.
Net Wt.
(lbs.)
10
13
17
23
26
36
45
* These models use external equalized expansion valve
Thin Profile Electric Defrost Unit Coolers
Model TL low temperature unit cooler has a completely automatic defrost system. Mounted in
the top of a refrigerator, its extremely compact cabinet makes it possible to utilize the entire top
shelf area for storage. With a normal operating range of 15°F to –20°F, this unit is ideally suited for
such applications as commercial freezers, ice cream boxes, bakery freezers and dual-temp reach-in
boxes. Defrosting is accomplished with Larkin’s unique electric defrost system. Mechanical contact
is provided between the heater elements and the drain pan, ensuring a warm pan during the
defrost cycle.
Sufficient space is provided to mount the expansion valve within the cabinet.
Systems for both 115 volt and 208-230 volt operation are available. Also features sweat inlet
connection to reduce leaks.
TL
Model
TL09
TL12
TL16
TL21
TL28
TL35*
TL53*
Motor
BTUH
10°F TD CFM
115/1
230/1
Qty.
-10°F SST
Total FLA Total FLA
900
1,200
1,600
2,100
2,800
3,500
5,300
110
210
210
240
335
420
595
1
2
2
1
3
2
3
0.8
1.6
1.6
1.0
-
0.4
0.8
0.8
0.5
1.2
1.0
1.5
* These models use external equalized expansion valve
Dimensions
(in.)
Heater
Watts
115/1
Amps
230/1
Amps
L
H
D
475
600
700
1,100
1,430
1,600
1,950
4.1
5.2
6.1
9.6
-
2.1
2.6
3.0
4.8
5.7
7.0
8.5
16-1/2
20-1/2
24
24
31-5/8
38-3/8
49-1/8
4-1/2
4-1/2
4-1/2
6-3/4
6-3/4
6-3/4
6-3/4
13-1/2
13-1/2
14-1/2
16-1/2
14-1/2
16-1/2
16-1/2
Connections
(in.)
Liquid Suction
OD
ID
3/8
3/8
3/8
1/2
3/8
1/2
3/8
1/2
3/8
1/2
1/2
5/8
1/2
7/8
Drain
OD
1/2
1/2
1/2
1/2
1/2
1/2
1/2
Approx.
Net Wt.
(lbs.)
10
15
19
19
22
31
45
Reach-in Evaporators
High Profile Air Defrost Unit Coolers
Model C unit coolers are ideal for refrigerated reach-ins. It mounts to the top of the refrigerator
and discharges cold air against the back wall. With this air flow pattern, the air is not blasted on
the product, but is diffused along the back wall and then gently drawn across the product as it
returns to the unit; thus, uniform temperatures are maintained throughout the refrigerator. In
addition, door sweating and refrigeration loss due to door opening is greatly reduced because the
air is not discharged against the doors. Mounting is easy with aluminum hangers that automatically
space the unit the correct distance from the back wall. The expansion valve fits inside, out of
sight. Model C is available with an optional protective coil coating (designated as model CK) for
corrosion protection. Also features sweat inlet connection to reduce leaks.
Dimensions
(in.)
Motor
C (K)
Model
BTUH
10°F
TD
CFM
C13
C17
C23
C30
C43*
1,300
1,700
2,300
3,000
4,300
235
250
265
480
520
115/1
208-230/1
Qty.
Total FLA Total FLA
1
1
1
2
2
1.0
1.0
1.0
2.0
2.0
0.5
0.5
0.5
1.0
1.0
L
H
D
14-1/4
17-1/4
22-3/4
27-3/4
38
8-7/8
8-7/8
8-7/8
8-7/8
8-7/8
13-3/4
13-3/4
13-3/4
13-3/4
13-3/4
Connections
(in.)
Liquid Suction
OD
ID
3/8
3/8
3/8
1/2
3/8
1/2
3/8
1/2
1/2
1/2
Drain
OD
1/2
1/2
1/2
1/2
1/2
Approx.
Net Wt.
(lbs.)
12
12
17
21
33
* Size 43 uses external equalized expansion valve
V-Profile Air Defrost Unit Coolers
Model VA is a deluxe unit designed for use in small reach-ins, back bar and under counter
refrigerators, and many other applications where a small, compact unit is required. The
thermal expansion valve mounts inside of the unit. The unit can be mounted from the
ceiling or off the back or end walls, or can be used in mullion application.
VA is available with an optional protective coil coating for corrosion protection (use model
designation VAK). Also features sweat inlet connection to reduce leaks.
Dimensions
(in.)
Motor
VA
Model
BTUH
10°F
TD
CFM
VA06
VA08
VA12
VA17
600
800
1,200
1,700
135
130
265
245
115/1
208-230/1
Qty.
Total FLA Total FLA
1
1
2
1
0.8
0.8
1.6
1.0
0.4
0.4
0.8
0.5
L
H
D
12-1/2
12-1/4
18
14
6-7/8
6-7/8
8
9-3/4
8-1/8
8-1/8
8-1/8
10-1/2
Connections
(in.)
Liquid Suction
OD
ID
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
Drain
OD
1/2
1/2
1/2
1/2
Approx.
Net Wt.
(lbs.)
7
7
12
9
Reach-in Evaporators
Back Bar Unit Coolers
Model BB is available in either air or electric defrost. These compact, wall-mounted
units are suitable for 35°F to 40°F (BBM medium temp models) and 0°F to -10°F (BBL
low temp models) under-counter reach-in fixtures. Motors are thermally protected and
lifetime lubricated. Fan blades and guards are molded from corrosion-proof Lexan®.
Housing is made of grained aluminum for long life and easy cleaning. Also features
sweat inlet connection to reduce leaks.
Motor
BB
Model
BTUH
10°F
TD
CFM
BBL10
BBM11
BBL15
BBM16
1,000
1,100
1,500
1,600
90
90
180
180
Qty.
HP
1
1
2
2
1/150
1/150
1/150
1/150
Heater
115/1
208-230/1
Watts
Total FLA Total FLA
0.8
0.4
275
0.8
0.4
1.6
0.8
350
1.6
0.8
-
Dimensions
(in.)
Approx.
Net Wt.
115/1 208-230/1
(lbs.)
L
H
D
Amps
Amps
2.7
1.4
19-3/4 14 5-1/2
13
19-3/4 14 5-1/2
12
3.5
1.7
26-1/4 14 5-1/2
15
26-1/4 14 5-1/2
14
All units have 3/8“ OD suction, 1/2“ OD sweat inlet and 1/2“ OD Drain
Standard Mullion Unit Coolers
Model KMK is ideal for use in under-counter reach-in refrigeration. The thin-line design
allows the unit to be mounted behind a mullion with sufficient clearance for the installation
of tray slides. KMK has a unique fan arrangement that allows air to be drawn into the top
of the unit, pulling return air from both sides of the mullion.
The versatile design of the compact mullion is also adaptable for mounting on the back
wall or ends of a beverage cooler. The finned coil of KMK is protected by special coating as
standard. Also features sweat inlet connection to reduce leaks.
Dimensions
(in.)
Motor
KMK
Model
BTUH
10°F
TD
CFM
KMK13
KMK17
KMK23
1,300
1,700
2,300
180
170
255
115/1
208-230/1
Qty.
Total FLA Total FLA
2
2
3
1.6
1.6
2.4
0.8
0.8
1.2
L
H
15-5/8 17-3/4
15-5/8 19-3/4
22
19-3/4
D
5-5/8
5-5/8
5-5/8
Connections
(in.)
Liquid Suction
OD
OD
3/8
3/8
3/8
3/8
3/8
1/2
Drain
OD
5/8
5/8
5/8
Approx.
Net Wt.
(lbs.)
15
17
23
Reverse Air Mullion Unit Coolers
Model RAMK is ideal for use in under-counter reach-in refrigeration. The thin-line design
allows the unit to be mounted behind a mullion with sufficient clearance for the installation
of tray slides. RAMK or Reverse Air Mullion draws air through the coil at the bottom and
discharges the cooled air out the top. This arrangement allows the coldest air to be in
contact with drop-in trays.
The versatile design of the compact mullion is also adaptable for mounting on the back
wall or ends of a beverage cooler. The finned coil of RAMK is protected by special coating
as standard. Also features sweat inlet connection to reduce leaks.
Dimensions
(in.)
Motor
RAMK
Model
BTUH
10°F
TD
CFM
RAMK13
RAMK17
RAMK23
1,300
1,700
2,300
180
170
255
115/1
208-230/1
Qty.
Total FLA Total FLA
2
2
3
1.6
1.6
2.4
0.8
0.8
1.2
L
H
15-5/8 17-3/4
15-5/8 19-3/4
22
19-3/4
D
5-5/8
5-5/8
5-5/8
Connections
(in.)
Liquid Suction
OD
OD
3/8
3/8
3/8
3/8
3/8
1/2
Drain
OD
5/8
5/8
5/8
Approx.
Net Wt.
(lbs.)
15
17
23
Reach-in Evaporators
Twin-Flow Unit Coolers
Model BTO is a compact two-way design with medium velocity airflow. The unit is mounted
flush to the ceiling and draws air in through the fan and discharges out both sides. The air
pattern reduces air loss when doors are opened and the medium velocity reduces product
drying. Twin-Flow units are for applications of 35˚F and higher. Box temperatures are kept more
constant throughout and fresh products last longer. Seven sizes are available with BTUH from
900 to 5,500 at 10˚TD. The BTO is available with an optional coated coil for corrosion protection
(use model designation BTOK). Also features sweat inlet connection to reduce leaks.
BTO (K)
Model
BTUH
10°F
TD
Dimensions
(in.)
Motor
CFM
115/1
208-230/1
Qty.
Total FLA Total FLA
BTO09
900
130
1
0.8
0.4
BTO13
1,300 240
2
1.6
0.8
BTO18
1,800 255
1
1.0
0.5
BTO25* 2,500 460
2
2.0
1.0
BTO35* 3,500 425
2
2.0
1.0
BTO45* 4,500 550
2
2.0
1.0
BTO55* 5,500 730
1
2.1
1.1
* These models use external equalized expansion valves
L
H
D
19-1/8
19-1/8
19-1/8
26-1/8
26-1/8
29-1/8
29-1/8
4-7/8
5-3/4
5-3/4
6-3/4
6-3/4
9-1/4
8-1/2
16-1/8
16-1/8
16-1/8
18-1/8
18-1/8
21-1/8
21-1/8
Inlet
OD
1/2
1/2
1/2
1/2
1/2
1/2
1/2
Connections
(in.)
Suction
ID
1/2
1/2
1/2
1/2
1/2
1/2
1/2
Drain
OD
1/2
1/2
1/2
1/2
1/2
5/8
5/8
Approx.
Net Wt.
(lbs.)
9
11
12
19
20
29
29
Dual Air Unit Coolers
Model U
is used wherever a small, compact unit is required, such as salad boxes, back bars and
direct-draw boxes. It can be mounted on the ceiling or wall. The Model U unit draws air in through the
front and discharges it out both sides to ensure proper ­distribution of cool air and maintain a uniform
box temperature. Also features flare connections. This is the original dual air flow unit!
U is available with an optional coated coil for corrosion protection (use model designation UK).
Dimensions
(in.)
Motor
U (K)
Model
BTUH
10°F
TD
CFM
U09
U12
U15
850
1,150
1,500
190
250
310
115/1
208-230/1
Qty.
Total FLA Total FLA
1
1
1
0.45
0.45
1.10
0.55
0.55
0.55
L
H
D
11-1/2
17-1/2
17-1/2
8-1/2
8-1/2
9-1/2
8-7/8
8-7/8
10-7/8
Connections
(in.)
Liquid Suction
FN
ID
1/2
3/8
1/2
3/8
1/2
3/8
Drain
OD
1/2
1/2
1/2
Approx.
Net Wt.
(lbs.)
8
8
12
Extended Thin Profile Unit Cooler
Models LTA/LTL unit cooler is the most compact designed unit for reach-in display cases. The unit’s
low height design allows the unit to ’hide’ at the top of the cooler, giving the case a cleaner look and
allows for more room for shelves and product. These units have front-access end panels for easy access
to refrigerant and electrical compartments, along with modular front-access panels that make it easy to
access the motors. Internally enhanced tube design provides increased unit performance.
Better performance, easy installation, servicing and the quality of Larkin makes this unit the perfect fit
for your display case needs.
LTA
Model
LTA053
LTA079
LTA102
LTA134
LTA172
LTL
Model
LTL046BA
LTL068BA
LTL093BA
LTL115BA
LTL133BA
Capacity
BTUH 10°F TD
25°F SST
5,300
7,900
10,200
13,400
17,200
Capacity
BTUH 10°F TD
-10°F SST
4,600
6,800
9,300
11,500
13,300
LTA Air Defrost
Fan
kW
CFM
M3H
Qty.
HP
1.6
2.3
3.0
3.9
5.0
850
1,350
1,800
2,250
2,550
1,450
2,300
3,100
3,850
4,350
2
3
4
5
6
1/20
1/20
1/20
1/20
1/20
kW
CFM
1.3
2.0
2.7
3.4
3.9
850
1,300
1,700
2,100
2,550
Shaded Pole Motor
115/1/60
208-230/1/60
Watts
Amps
Watts
Amps
220
3.6
200
2.0
330
5.4
300
3.0
440
7.2
400
4.0
550
9.0
500
5.0
660
108
600
6.0
LTL Electric Defrost
Fan
Shaded Pole Motor
208-230/1/60
M3H
Qty.
HP
Watts
Amps
1,450
2
1/20
200
2.0
2,200
3
1/20
300
3.0
2,900
4
1/20
400
4.0
3,600
5
1/20
500
5.0
4,350
6
1/20
600
6.0
Defrost Heaters
208-230/1/60
Watts
Amps
1,100
4.8
1,650
7.2
2,200
9.6
2,750
12.0
3,300
14.4
Walk-in Evaporators
Low Profile Air Defrost Unit Coolers
Model LCA features:
•
•
•
•
•
•
•
Air Defrost with shaded pole motors
More capacities – 5,700, 7,000 and 35,000 BTUH models
More Accessible:
-Electrical and piping on opposite ends
-Access provided through large access panels
Schrader valve on suction header
Extended Warranty for coil construction:
-3-years protection against tube sheet leaks
Drain Fitting allows removal of drain pan without removal of hard piping
Molded Fan Guard design made of strong plastic material or optional wire fan
guard for air diffusion
• Internally enhanced tubing
• Available with PSC motor option
Model LCA – Air Defrost Models 60Hz. with Shaded Pole Motors
Fan
LCA
Model
BTUH
10°F
TD
CFM
Qty.
HP
LCA640
LCA651
LCA662
LCA672
LCA690
LCA6110
LCA6135
LCA6160
LCA6185
LCA6215
LCA6260
LCA6310
LCA6350
4,000
5,100
6,200
7,200
9,000
11,000
13,500
16,000
18,500
21,500
26,000
31,000
35,000
8,004
800
800
1,500
1,500
1,500
2,250
2,250
3,000
3,000
3,750
4,500
4,500
1
1
1
2
2
2
3
3
4
4
5
6
6
1/15
1/15
1/15
1/15
1/15
1/15
1/15
1/15
1/15
1/15
1/15
1/15
1/15
Shaded Pole
Motor
115/
208-230/
1/60
1/60
1.8
1.0
1.8
1.0
1.8
1.0
3.6
2.0
3.6
2.0
3.6
2.0
5.4
3.0
5.4
3.0
7.2
4.0
7.2
4.0
9.0
5.0
10.8
6.0
10.8
6.0
Dimensions
(in.)
L
H
D
29-1/2
29-1/2
29-1/2
45-1/2
45-1/2
45-1/2
61-1/2
61-1/2
77-1/2
77-1/2
93-1/2
109-1/2
109-1/2
14-15/16
14-15/16
14-15/16
14-15/16
14-15/16
14-15/16
14-15/16
14-15/16
14-15/16
14-15/16
14-15/16
14-15/16
14-15/16
14-7/8
14-7/8
14-7/8
14-7/8
14-7/8
14-7/8
14-7/8
14-7/8
14-7/8
14-7/8
14-7/8
14-7/8
14-7/8
All fan diameters are 12”
Air throw is 30 feet based on 8-foot ceiling with no obstructions where velocity drops to 50 fpm. Molded fan guards used
Hanger brackets will accept 3/8”
Optional PSC motors available for energy efficiency
460/1 optional motors available
Connections
(in.)
Inlet
Suction
ODF
ODS
1/2
5/8
1/2
5/8
1/2
7/8
1/2
7/8
1/2
7/8
1/2
7/8
1/2
7/8
1/2
7/8
1/2
1-1/8
1/2
1-1/8
1/2
1-1/8
1/2
1-1/8
1/2
1-3/8
Approx.
Net Wt.
(lbs.)
28
31
34
45
49
51
67
69
82
84
103
124
127
Walk-in Evaporators
Low Profile Electric and Hot Gas Defrost
Unit Coolers
Models LCE (electric defrost) and LCH (hot gas defrost)
Additional Features for Electric and Hot Gas Defrost Models:
• More Accessable:
-Defrost heaters on entering air face of the coil
-Hot gas loop on bottom of coil, not in drain pan
-Drain pan heater on bottom of coil, not in drain pan
• Fixed defrost termination/fan delay
• Reduced heater wattage
• Available with PSC motor option
Unit pictured with optional wire fan guard
Model LCE – Electric Defrost Models 60Hz. with Shaded Pole Motors
Fan
Shaded Pole
Motor
208-230/
HP
1/60
Defrost Heaters
(Total Amps)
208-230/ 208-230/
Watts
1/60
3/60
LCE
Model
BTUH
10°F
TD
CFM
Qty.
LCE635
LCE643
LCE665
LCE676
LCE694
LCE6120
LCE6160
LCE6200
LCE6240
LCE6270
3,500
4,300
6,500
7,600
9,400
12,000
16,000
20,000
24,000
27,000
700
650
1,400
1,300
1,300
2,100
2,600
3,250
3,900
3,900
1
1
2
2
2
3
4
5
6
6
1/15
1/15
1/15
1/15
1/15
1/15
1/15
1/15
1/15
1/15
1.0
1.0
2.0
2.0
2.0
3.0
4.0
5.0
6.0
6.0
900
900
1,800
1,800
1,800
2,700
3,600
4,500
5,400
5,400
LCE457
LCE467
LCE482
LCE4105
LCE4139
LCE4174
LCE4208
LCE4235
5,700
6,700
8,200
10,500
13,900
17,400
20,800
23,500
1,440
1,380
1,380
2,170
2,760
3,450
4,140
4,140
2
2
2
3
4
5
6
6
1/15
1/15
1/15
1/15
1/15
1/15
1/15
1/15
2.0
2.0
2.0
3.0
4.0
5.0
6.0
6.0
1,800
1,800
1,800
2,700
3,600
4,500
5,400
5,400
Dimensions
(in.)
460/
1/60
Connections
(in.)
Inlet
Suction
ODF
ODS
Approx.
Net Wt.
(lbs.)
L
H
D
29-1/2
29-1/2
45-1/2
45-1/2
45-1/2
61-1/2
61-1/2
93-1/2
109-1/2
109-1/2
14-15/16
14-15/16
14-15/16
14-15/16
14-15/16
14-15/16
14-15/16
14-15/16
14-15/16
14-15/16
14-7/8
14-7/8
14-7/8
14-7/8
14-7/8
14-7/8
14-7/8
14-7/8
14-7/8
14-7/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
7/8
7/8
7/8
1-1/8
1-1/8
1-1/8
1-1/8
24
29
43
45
48
60
81
101
121
124
45-1/2
45-1/2
45-1/2
77-1/2
77-1/2
93-1/2
109-1/2
109-1/2
14-15/16
14-15/16
14-15/16
14-15/16
14-15/16
14-15/16
14-15/16
14-15/16
14-7/8
14-7/8
14-7/8
14-7/8
14-7/8
14-7/8
14-7/8
14-7/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
7/8
7/8
7/8
7/8
1-1/8
1-1/8
1-1/8
1-1/8
42
44
47
59
80
100
120
123
LCE Models 6 Fins Per Inch
3.9
3.9
7.8
7.8
7.8
11.7
15.7
19.6
23.5
23.5
2.3
2.3
4.5
4.5
4.5
6.8
9.0
11.3
13.6
13.6
2.0
2.0
3.9
3.9
3.9
5.9
7.8
9.8
11.7
11.7
LCE Models 4 Fins Per Inch
7.8
7.8
7.8
11.7
15.7
19.6
23.5
23.5
4.5
4.5
4.5
6.8
9.0
11.3
13.6
13.6
3.9
3.9
3.9
5.9
7.8
9.8
11.7
11.7
208-230/3/60 models have single-phase motors with three-phase heaters
Model LCH – Hot Gas Defrost Models 60Hz. with Shaded Pole Motors
LCH
Model
BTUH
10°F
TD
Fan
CFM
Qty.
Shaded Pole
Motor
115/ 208-230/
HP
Watts
1/60
1/60
Defrost Heaters
(Total Amps)
115/ 208-230/
1/60
1/60
Dimensions
(in.)
460/
1/60
Connections
(in.)
Inlet
Suction
ODF
ODS
Approx.
Net Wt.
(lbs.)
L
H
D
29-1/2
29-1/2
45-1/2
45-1/2
45-1/2
61-1/2
61-1/2
93-1/2
109-1/2
109-1/2
14-15/16
14-15/16
14-15/16
14-15/16
14-15/16
14-15/16
14-15/16
14-15/16
14-15/16
14-15/16
14-7/8
14-7/8
14-7/8
14-7/8
14-7/8
14-7/8
14-7/8
14-7/8
14-7/8
14-7/8
5/8
5/8
5/8
7/8
7/8
7/8
7/8
1-1/8
1-1/8
1-1/8
5/8
5/8
5/8
7/8
7/8
7/8
1-1/8
1-1/8
1-1/8
1-1/8
26
31
45
47
50
62
83
103
123
126
45-1/2
45-1/2
45-1/2
77-1/2
77-1/2
93-1/2
109-1/2
109-1/2
14-15/16
14-15/16
14-15/16
14-15/16
14-15/16
14-15/16
14-15/16
14-15/16
14-7/8
14-7/8
14-7/8
14-7/8
14-7/8
14-7/8
14-7/8
14-7/8
5/8
5/8
5/8
7/8
7/8
7/8
7/8
1-1/8
7/8
7/8
7/8
7/8
1-1/8
1-1/8
1-1/8
1-1/8
44
46
49
61
82
102
122
125
LCH Models 6 Fins Per Inch
LCH635
LCH643
LCH665
LCH676
LCH695
LCH6120
LCH6160
LCH6200
LCH6240
LCH6270
3,500
4,300
6,500
7,600
9,400
12,000
16,000
20,000
24,000
27,000
700
650
1,400
1,300
1,300
2,100
2,600
3,250
3,900
3,900
1
1
2
2
2
3
4
5
6
6
1/15
1/15
1/15
1/15
1/15
1/15
1/15
1/15
1/15
1/15
1.8
1.8
3.6
3.6
3.6
5.4
7.2
9.0
10.8
10.8
1.0
1.0
2.0
2.0
2.0
3.0
4.0
5.0
6.0
6.0
275
275
549
549
549
823
1,098
1,372
1,649
1,649
LCH457
LCH467
LCH482
LCH4105
LCH4139
LCH4174
LCH4208
LCH4235
5,700
6,700
8,200
10,500
13,900
17,400
20,800
23,500
1,440
1,380
1,380
2,170
2,760
3,450
4,140
4,140
2
2
2
3
4
5
6
6
1/15
1/15
1/15
1/15
1/15
1/15
1/15
1/15
3.6
3.6
3.6
5.4
7.2
9.0
10.8
10.8
2.0
2.0
2.0
3.0
4.0
5.0
6.0
6.0
549
549
549
823
1,098
1,372
1,649
1,649
2.5
2.5
5.0
5.0
5.0
7.5
10.0
12.5
15.0
15.0
1.3
1.3
2.5
2.5
2.5
3.7
5.0
6.2
7.5
7.5
0.6
0.6
1.1
1.1
1.1
1.6
2.2
2.7
3.2
3.2
LCH Models 4 Fins Per Inch
5.0
5.0
5.0
7.5
10.0
12.5
15.0
15.0
2.5
2.5
2.5
3.7
5.2
6.2
7.5
7.5
1.1
1.1
1.1
1.6
1.6
2.7
3.2
3.2
Walk-in Evaporators
Low Velocity Air Defrost Unit Coolers
Model LFA features very low coil face velocity, yet provides positive, quiet air movement. This
combination ensures even box temperatures and high humidity at the same time. LFA unit
coolers equal or outperform gravity coils, but are far more ­economical to install. Their low, narrow
construction was designed for installation between rail beams in meat storage and aging rooms.
The high humidity characteristics minimize shrinkage and dehydration of ­produce. Model LFA
has been designed for the attractive appearance and easy cleaning necessary in food processing.
Available with PSC motor option.
Model LFA – Low Velocity Air Defrost Unit Coolers
LFA
Model
LFA070
LFA087
LFA120
LFA135
LFA150
LFA170
LFA190
LFA230
LFA270
BTUH
10°F
TD
7,000
8,700
12,000
13,500
15,000
17,000
19,000
23,000
27,000
15°F
TD
10,500
13,050
18,000
20,250
22,500
25,500
28,500
34,500
40,500
Dimensions
(in.)
Motor
CFM
Qty.
1,200
1,200
1,300
1,300
1,900
1,900
2,400
2,700
3,200
2
2
2
2
2
2
2
2
2
115/1
FLA
3.6
3.6
3.6
3.6
3.6
3.6
2.8†
2.8†
2.8†
230/1
FLA
1.8
1.8
1.8
1.8
1.8
1.8
1.4†
1.4†
1.4†
L
H
D
83
83
111
111
114
114
134
153
158
14
14
14-1/2
14-1/2
16
16
16-1/2
16-1/2
20
23-1/4
23-1/4
23-1/4
23-1/4
23-1/4
23-1/4
23-1/4
23-1/4
28-1/4
Connections
(in.)
Liquid
Suction
ODS
ODS
1/2
7/8
1/2
7/8
1/2
7/8
1/2
7/8
1/2
1-1/8
1/2
1-1/8
1/2
1-1/8
1/2
1-1/8
1/2
1-3/8
Approx.
Net Wt.
(lbs.)
178
189
262
264
280
285
298
366
405
† PSC motors
Low Velocity Electric Defrost Unit Coolers
Model LFAE is the low velocity coil perfect for storage of fresh meats. Designed for use
from 28°F to 34°F, these units may be used for floral boxes, vegetable and fruit storage
rooms and dough retarding storage, or any other application where freshness is of prime
importance. The high efficiency, fast electric defrost allows the LFAE to maintain room
temperature and minimize incidence of sliming and the formation of bacterial growth.
Available with PSC motor option.
Model LFAE – Low Velocity Electric Defrost Unit Coolers
LFAE
Model
LFAE070
LFAE087
LFAE120
LFAE135
LFAE150
LFAE170
LFAE190
LFAE230
LFAE270
† PSC motors
10
BTUH
10°F
TD
7,000
8,700
12,000
13,500
15,000
17,000
19,000
23,000
27,000
15°F
TD
10,500
13,050
18,000
20,250
22,500
25,500
28,500
34,500
40,500
Motor
CFM
Qty.
1,200
1,200
1,300
1,300
1,900
1,900
2,400
2,700
3,200
2
2
2
2
2
2
2
2
2
230/1
FLA
1.8
1.8
1.8
1.8
1.8
1.8
1.4†
1.4†
1.4†
Dimensions
(in.)
Heater
Watts
2,800
2,800
4,200
4,200
4,800
4,800
4,800
6,000
6,000
230/1
Amps
11.5
11.5
16.7
16.7
16.7
16.7
20.7
24.8
24.8
L
H
D
83
83
111
111
114
114
134
153
158
14
14
14-1/2
14-1/2
16
16
16-1/2
16-1/2
20
23-1/4
23-1/4
23-1/4
23-1/4
23-1/4
23-1/4
23-1/4
23-1/4
28-1/4
Connections
(in.)
Liquid
Suction
Drain
OD
OD
OD
1/2
7/8
7/8
1/2
7/8
7/8
1/2
7/8
7/8
1/2
7/8
7/8
1/2
1-1/8
7/8
1/2
1-1/8
7/8
1/2
1-1/8
7/8
1/2
1-1/8
7/8
1/2
1-3/8
7/8
Approx.
Net Wt.
(lbs.)
178
189
262
264
280
285
298
366
405
Walk-in Evaporators
Low Velocity Hot Gas Defrost Unit Coolers
Model LFAH has very low face velocity, yet provides positive, quiet air movement. This
combination ensures even box temperatures with high humidity at the same time. The hot gas
defrost is available factory-installed or as a field installed kit, making LFAH a good choice for
(28°F to 34°F) applications where positive defrost is required. The low air movement ensures
even temperatures, which is very important for product freshness. The unit is ideal for meat
storage, floral boxes, vegetable and fruit storage or dough ­retarding storage.
Model LFAH has heavy gauge aluminum casings with a rust-free, all aluminum white case
for an attractive look. Strong aluminum hanger bars are slotted for easy installation, and a
double drain pan with electric heaters in the inner pan eliminate sweating or condensate flow
problems. Available with PSC motor option.
Model LFAH – Low Velocity Hot Gas Defrost Unit Coolers
LFAH
Model
LFAH070
LFAH087
LFAH120
LFAH135
LFAH150
LFAH170
LFAH190
LFAH230
LFAH270
BTUH
10°F
TD
7,000
8,700
12,000
13,500
15,000
17,000
19,000
23,000
27,000
Dimensions
(in.)
Motor
15°F
TD
10,500
13,050
18,000
20,250
22,500
25,500
28,500
34,500
40,500
CFM
Qty.
1,200
1,200
1,300
1,300
1,900
1,900
2,400
2,700
3,200
2
2
2
2
2
2
2
2
2
115/1
FLA
3.6
3.6
3.6
3.6
3.6
3.6
2.8†
2.8†
2.8†
230/1
FLA
1.8
1.8
1.8
1.8
1.8
1.8
1.4†
1.4†
1.4†
L
H
D
83
83
111
111
114
114
134
153
158
14
14
14-1/2
14-1/2
16
16
16-1/2
16-1/2
20
23-1/4
23-1/4
23-1/4
23-1/4
23-1/4
23-1/4
23-1/4
23-1/4
28-1/4
Liquid
OD
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1-1/8
Connections
(in.)
Suction Hot Gas
OD
OD
7/8
1/2
7/8
1/2
7/8
1/2
7/8
1/2
1-1/8
1/2
1-1/8
1/2
1-1/8
1/2
1-1/8
1/2
1-3/8
1/2
Drain
OD
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
Approx.
Net Wt.
(lbs.)
178
189
262
264
280
285
298
366
405
† PSC motors
Low Air Flow Air Defrost Unit Coolers
Model LWA low air flow evaporators is ideal for floral storage, fresh fruit and vegetables,
dough retarding, fresh meat storage and preparation and many other applications of 35°F
and above for LWA air defrost models. The low air flow and quiet fans are ideal for work-room
applications. The generous coil surface combined with close TD system balance provides
high humidity characteristics to minimize product shrinkage and drying. Available with
PSC motor option.
Model LWA – Low Air Flow Air Defrost Unit Coolers
Dimensions
(in.)
Motor
LWA
Model
BTUH
10°F
TD
CFM
LWA050
LWA075
LWA100
LWA130
LWA155
LWA180
LWA210
LWA270
LWA340
5,000
7,500
10,000
13,000
15,500
18,000
21,000
27,000
34,000
725
730
1,450
1,470
1,460
2,130
2,840
2,800
3,500
115/
1/60
230/
1/60
L
H
D
2.1
2.1
4.2
4.2
4.2
6.3
8.4
8.4
10.5
1.1
1.1
2.2
2.2
2.2
3.3
4.4
4.4
5.5
53-1/2
75-1/2
75-1/2
75-1/2
75-1/2
75-1/2
97-1/2
97-1/2
119-1/2
8-7/8
8-7/8
11-3/8
15-1/8
15-1/8
15-1/8
15-1/8
15-1/8
15-1/8
26-5/8
26-5/8
26-5/8
26-5/8
26-5/8
26-5/8
26-5/8
26-5/8
26-5/8
Connections
(in.)
Liquid
Suction
OD
ODS
1/2
7/8
1/2
7/8
1/2
7/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-3/8
1-3/8
1-3/8
1-3/8
Approx.
Net Wt.
(lbs.)
70
103
106
145
149
160
193
200
242
All units have 1/4” OD external equalizer and 3/4” FPT drain connection
11
Walk-in Evaporators
Low Air Flow Electric Defrost Unit Coolers
Model LWE low air flow evaporators are ideal for floral storage, fresh fruit and vegetables,
dough retarding, fresh meat storage and preparation and many other applications of
28°F and above for model LWE electric defrost models. The low air flow and quiet fans
are ideal for work-room applications. The generous coil surface combined with close TD
system balance provides high humidity characteristics to minimize product shrinkage
and drying. Available with PSC motor option.
Model LWE – Low Air Flow Electric Defrost Unit Coolers
Motor
Dimensions
(in.)
Heater
LWE
Model
BTUH
10°F
TD
CFM
115/
1/60
230/
1/60
LWE050
LWE075
LWE100
LWE130
LWE155
LWE180
LWE210
LWE270
LWE340
5,000
7,500
10,000
13,000
15,500
18,000
21,000
27,000
34,000
725
730
1,450
1,470
1,460
2,130
2,840
2,800
3,500
2.1
2.1
4.2
4.2
4.2
6.3
8.4
8.4
10.5
1.1
1.1
2.2
2.2
2.2
3.3
4.4
4.4
5.5
Watts
230/1
Amps
L
H
D
2,000
2,400
2,800
4,000
4,000
4,000
5,200
5,200
7,000
8.7
10.5
12.2
17.4
17.4
17.4
22.6
22.6
30.4
53-1/2
75-1/2
75-1/2
75-1/2
75-1/2
75-1/2
97-1/2
97-1/2
119-1/2
8-7/8
8-7/8
11-3/8
15-1/8
15-1/8
15-1/8
15-1/8
15-1/8
15-1/8
26-5/8
26-5/8
26-5/8
26-5/8
26-5/8
26-5/8
26-5/8
26-5/8
26-5/8
Connections
(in.)
Liquid
Suction
OD
ODS
1/2
7/8
1/2
7/8
1/2
7/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-3/8
1-3/8
1-3/8
1-3/8
Approx.
Net Wt.
(lbs.)
70
108
111
150
154
157
203
208
250
All units have 1/4” OD external equalizer and 3/4” FPT drain connection
Low Air Flow Hot Gas Defrost Unit Coolers
Model LWG low air flow evaporators are ideal for floral storage, fresh fruit and vegetables,
dough retarding, fresh meat storage and preparation and many other applications of
28°F and above for model LWG hot gas defrost models. The low air flow and quiet fans
are ideal for work-room applications. The generous coil surface combined with close TD
system balance provides high humidity characteristics to minimize product shrinkage
and drying. Available with PSC motor option.
Model LWG – Low Air Flow Hot Gas Defrost Unit Coolers
Motor
LWE
Model
BTUH
10°F
TD
CFM
LWG100
LWG130
LWG155
LWG180
LWG210
LWG270
LWG340
10,000
13,000
15,500
18,000
21,000
27,000
34,000
1,450
1,470
1,460
2,130
2,840
2,800
3,500
115/
1/60
230/
1/60
4.2
4.2
4.2
6.3
8.4
8.4
10.5
2.2
2.2
2.2
3.3
4.4
4.4
5.5
Watts
230/1
Amps
L
H
D
350
500
500
500
650
650
875
1.5
2.2
2.2
2.2
2.8
2.8
3.8
75-1/2
75-1/2
75-1/2
75-1/2
97-1/2
97-1/2
119-1/2
11-3/8
15-1/8
15-1/8
15-1/8
15-1/8
15-1/8
15-1/8
26-5/8
26-5/8
26-5/8
26-5/8
26-5/8
26-5/8
26-5/8
All units have 1/4” OD external equalizer and 3/4” FPT drain connection
12
Dimensions
(in.)
Heater
Connections
(in.)
Liquid
Suction
OD
ODS
1/2
7/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-3/8
1-3/8
1-3/8
1-3/8
Approx.
Net Wt.
(lbs.)
131
170
174
185
223
228
270
Walk-in Evaporators
Center Mount Air Defrost Unit Coolers
Model ACM units are compact, medium velocity coolers designed for use in 35°F and above rooms.
The low height gives more head room and allows product to be stacked higher. The center ceiling
mount with dual air flow allows shelving and storage of product around all walls.
Also equipped with dual drain pans to prevent sweating, the ACM units have a heavy gauge grained
aluminum cabinet that cleans easily and looks attractive. The PVC coated fan guards won’t rust
or rattle.
Ease of installation and service are also part of the design. The panels on the ends quickly remove to
complete access to refrigerant components and electrical terminal block, without the need to drop
the fan panel/drain pan. Available with PSC motor option.
Model ACM – Center Mount Air Defrost Unit Coolers
1
Dimensions
(in.)
Motor
ACM
Model
BTUH
10°F
TD
CFM
ACM052
ACM076
ACM090
ACM102
ACM108
ACM134
ACM156
ACM179
ACM208
ACM249
5,200
7,600
9,000
10,200
10,800
13,400
15,600
17,900
20,800
24,900
610
1,300
1,260
1,220
1,950
1,890
1,830
2,520
2,440
3,050
Qty.
115/1
FLA
230/1
FLA
L
H
D
1
2
2
2
3
3
3
4
4
5
2.1
4.2
4.2
4.2
6.3
6.3
6.3
8.4
8.4
10.5
1.1
2.2
2.2
2.2
3.3
3.3
3.3
4.4
4.4
5.5
31-1/2
53-1/2
53-1/2
53-1/2
75-1/2
75-1/2
75-1/2
97-1/2
97-1/2
119-1/2
8-5/8
8-5/8
8-5/8
8-5/8
8-5/8
8-5/8
8-5/8
8-5/8
8-5/8
8-5/8
28-13/16
28-13/16
28-13/16
28-13/16
28-13/16
28-13/16
28-13/16
28-13/16
28-13/16
28-13/16
Connections1
(in.)
Liquid
Suction
Drain
OD
OD
FPT
1/2
7/8
3/4
1/2
7/8
3/4
1/2
7/8
3/4
1/2
7/8
3/4
1/2
7/8
3/4
1/2
7/8
3/4
1/2
7/8
3/4
1/2
7/8
3/4
1/2
1-1/8
3/4
1/2
1-1/8
3/4
Approx.
Net Wt.
(lbs.)
42
64
70
83
105
117
123
149
164
206
All ACM coils have 1/4” OD external equalizer connections and 3/4” FPT drain connection
Center Mount Electric Defrost Unit Coolers
Model ECM is
the compact ceiling mount with only­ 8-5/8” height that provides maximum
headroom in a commercial freezer. The center mount design allows for product to be stacked all
around while air flow distributes evenly throughout the box. ECM is designed for –20°F to 34°F and
is ideal for tight storage situations.
Standard features include a heavy gauge grained aluminum cabinet that cleans easily and looks
attractive. The stainless steel screws prevent rust streaks, and the PVC coated fan guards won’t
rust. The ECM is designed to be easy to install and service. All the defrost controls are mounted
and wired to a terminal board, and panels on either end remove quickly for complete access to the
refrigerant components and electrical connection point. A quick-disconnect, waterproof plug and
­receptacle is supplied with each motor. Available with PSC motor option.
Model ECM – Center Mount Electric Defrost Unit Coolers
ECM
Model
ECM040
ECM054
ECM065
ECM090
ECM130
ECM174
BTUH
10°F
TD
4,000
5,400
6,500
9,000
13,000
17,400
12°F
TD
4,800
6,480
7,800
10,800
15,600
20,880
Dimensions
(in.)
Amps 208/230-1-50/60
Fan
CFM
Qty.
610
1,300
1,260
1,950
1,830
2,440
1
2
2
3
3
4
Motor
Shaded
PSC
Pole
1.1
0.4
2.2
0.8
2.2
0.8
3.3
1.2
3.3
1.2
4.4
1.6
Connections1
(in.)
Heaters
L
H
D
Inlet
OD
5.3
8.7
8.7
10.5
15.7
20.9
31-1/2
53-1/2
53-1/2
75-1/2
75-1/2
97-1/2
8-5/8
8-5/8
8-5/8
8-5/8
8-5/8
8-5/8
28-13/16
28-13/16
28-13/16
28-13/16
28-13/16
28-13/16
1/2
1/2
1/2
1/2
1/2
1/2
Suction
OD
7/8
7/8
7/8
7/8
7/8
1-1/8
Approx.
Net Wt.
(lbs.)
90
120
120
160
174
218
All ECM units have 1/4” OD external equalizer connections and 3/4” FPT drain connection
All models require external equalized expansion valve
1
13
Walk-in Evaporators
Medium Profile Unit Coolers
Models MMT6/MLT6 Larkin engineered superior quality and
performance into the new medium profile unit coolers. With
features like the innovative Thermo-Flex™ coil design that carries
a five-year limited warranty against refrigerant leaks, internal
grooved tubing for greater heat transfer efficiency and motors
that plug into the wiring harness for easier accessibility, these
units provide long life and dependability to your refrigeration
application.
With 10,000 to 71,000 BTUH size ranges and a modular design
that is only 25 inches high, these unit coolers serve a variety
of commercial and industrial applications. PSC motors come
standard to help you save energy.
Model MMT6 – Medium Profile Air Defrost 6 Fins Per Inch Unit Coolers
Dimensions
(in.)
Motor
MMT6
Model
BTUH
10°F
TD
CFM
MMT6130
MMT6155
MMT6245
MMT6300
MMT6365
MMT6450
MMT6510
MMT6600
MMT6710
13,000
15,500
24,500
30,000
36,500
45,000
51,000
60,000
71,000
2,300
2,200
4,600
4,400
6,900
6,600
9,200
8,800
10,500
115/1
/60
230/1
/60
460/1
/60
575/1
/60
L
H
D
4.0
4.0
8.0
8.0
12.0
12.0
16.0
16.0
-
1.8
1.8
3.6
3.6
5.4
5.4
7.2
7.2
9.0
1.0
1.0
2.0
2.0
3.0
3.0
4.0
4.0
5.0
0.75
0.75
1.5
1.5
2.25
2.25
3.0
3.0
3.75
39-3/10
39-3/10
67-3/10
67-3/10
95-3/10
95-3/10
123-3/10
123-3/10
138-3/4
25
25
25
25
25
25
25
25
25
22-7/8
22-7/8
22-7/8
22-7/8
22-7/8
22-7/8
22-7/8
22-7/8
22-7/8
Connections
(in.)
Inlet
Suction
ODF
ODF
1/2
7/8
1/2
1-1/8
7/8
1-1/8
7/8
1-1/8
7/8
1-3/8
1-1/8
1-3/8
1-1/8
1-5/8
1-1/8
1-5/8
1-1/8
1-5/8
Approx.
Net Wt.
(lbs.)
115
123
134
148
200
227
230
255
285
Model MLT6 – Medium Profile Electric Defrost 6 Fins Per Inch Unit Coolers
Motor
Dimensions
(in.)
Heater
MLT6
Model
BTUH
10°F
TD
CFM
230/1
/60
460/1
/60
575/1
/60
MLT6101
MLT6140
MLT6190
MLT6260
MLT6310
MLT6390
MLT6430
MLT6520
MLT6620
10,100
14,000
19,000
26,000
31,000
39,000
43,000
52,000
62,000
2,350
2,250
4,700
4,500
7,050
6,750
8,800
8,400
10,000
1.8
1.8
3.6
3.6
5.4
5.4
7.2
7.2
9.0
1.0
1.0
2.0
2.0
3.0
3.0
4.0
4.0
5.0
0.75
0.75
1.5
1.5
2.25
2.25
3.0
3.0
3.75
Watts
230/1
Amps
L
H
D
2,730
2,730
5,350
5,350
7,750
7,750
10,200
10,200
11,600
11.9
11.9
23.3
23.3
33.7
33.7
30.5*
30.5*
34.7*
39-3/10
39-3/10
67-3/10
67-3/10
95-3/10
95-3/10
123-3/10
123-3/10
138-3/4
25
25
25
25
25
25
25
25
25
22-7/8
22-7/8
22-7/8
22-7/8
22-7/8
22-7/8
22-7/8
22-7/8
22-7/8
Connections
(in.)
Inlet
Suction
ODF
ODF
1/2
7/8
1/2
1-1/8
7/8
1-1/8
1-1/8
1-3/8
1-1/8
1-3/8
1-1/8
1-3/8
1-1/8
1-5/8
1-1/8
1-5/8
1-1/8
1-5/8
Approx.
Net Wt.
(lbs.)
118
126
138
153
210
237
267
300
338
* 230/3
What is Thermo-Flex™ coil design?
Larkin’s innovative coil design utilizes a new and unique approach to coil expansion that virtually eliminates the possibility of leaks at tube sheets
and coil supports. Our engineers conceived the design through intense analysis of the cause of common coil failures. Through the use of accelerated
test procedures and computer simulation, our engineers pinpointed the primary stress points of a coil during its operation.
The Thermo-Flex™ coil design for the evaporator (U.S. Patent No. 5,584,340) allows the coil to “flex” during periods of defrost which result in expansion
of the coil surface. By eliminating the possibility of wear at critical stress areas, the integrity and longevity of the unit are dramatically increased.
The result is a product which greatly enhances overall system reliability and reduces risk of costly refrigerant loss. To prove our claim, Larkin offers a
five-year limited guarantee against leaks at tube sheets and center supports for all medium profile unit cooler models.
14
Walk-in Evaporators
Model MLT4 – Medium Profile Electric Defrost 4 Fins Per Inch Unit Coolers
Motor
MLT4
Model
BTUH
10°F
TD
CFM
MLT4100
MLT4165
MLT4220
MLT4250
MLT4330
MLT4370
MLT4440
MLT4530
10,000
16,500
22,000
25,000
33,000
37,000
44,000
53,000
2,325
4,900
4,650
7,350
6,975
9,100
8,700
10,350
Dimensions
(in.)
Heater
230/1
/60
460/1
/60
575/1
/60
Watts
230/1
Amps
L
H
D
1.8
3.6
3.6
5.4
5.4
7.2
7.2
9.0
1.0
2.0
2.0
3.0
3.0
4.0
4.0
5.0
0.75
0.75
1.5
1.5
2.25
2.25
3.0
3.0
2,730
5,350
5,350
7,750
7,750
10,200
10,200
11,600
11.9
23.3
23.3
33.7
33.7
30.5*
30.5*
34.7*
39-3/10
67-3/10
67-3/10
95-3/10
95-3/10
123-3/10
123-3/10
138-3/4
25
25
25
25
25
25
25
25
22-7/8
22-7/8
22-7/8
22-7/8
22-7/8
22-7/8
22-7/8
22-7/8
Connections
(in.)
Inlet
Suction
ODF
ODF
1/2
7/8
7/8
1-1/8
1-1/8
1-3/8
1-1/8
1-3/8
1-1/8
1-3/8
1-1/8
1-5/8
1-1/8
1-5/8
1-1/8
1-5/8
Approx.
Net Wt.
(lbs.)
125
136
151
207
234
262
295
332
* 208-230/3/60 amps for these models
Model MLG6 – Medium Profile Hot Gas Defrost 6 Fins Per Inch Unit Coolers
Motor
MLG6
Model
BTUH
10°F
TD
CFM
MLG6190
MLG6260
MLG6310
MLG6390
MLG6430
MLG6520
19,000
26,000
31,000
39,000
43,000
52,000
4,700
4,500
7,050
6,750
8,800
8,400
Dimensions
(in.)
Heater
115/1
/60
230/1
/60
460/1
/60
575/1
/60
Watts
230/1
Amps
L
H
D
8.0
8.0
12.0
12.0
16.0
16.0
3.6
3.6
5.4
5.4
7.2
7.2
2.0
2.0
3.0
3.0
4.0
4.0
1.5
1.5
2.25
2.25
3.0
3.0
950
950
1,350
1,350
1,800
1,800
4.1
4.1
5.9
5.9
7.8
7.8
67-3/10
67-3/10
95-3/10
95-3/10
123-3/10
123-3/10
25
25
25
25
25
25
22-7/8
22-7/8
22-7/8
22-7/8
22-7/8
22-7/8
Connections
(in.)
Inlet
Suction
ODF
ODF
1-1/8
1-1/8
1-1/8
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-5/8
1-3/8
1-5/8
Approx.
Net Wt.
(lbs.)
175
190
210
237
267
300
Model MLG4 – Medium Profile Hot Gas Defrost 4 Fins Per Inch Unit Coolers
Motor
MLG4
Model
BTUH
10°F
TD
CFM
MLG4165
MLG4220
MLG4250
MLG4330
MLG4370
MLG4440
16,500
22,000
25,000
33,000
37,000
44,000
4,900
4,650
7,350
6,975
9,100
8,700
Dimensions
(in.)
Heater
115/1
/60
230/1
/60
460/1
/60
575/1
/60
8.0
8.0
12.0
12.0
16.0
16.0
3.6
3.6
5.4
5.4
7.2
7.2
2.0
2.0
3.0
3.0
4.0
4.0
0.75
1.5
1.5
2.25
2.25
3.0
Watts
230/1
Amps
L
H
D
950
950
1,350
1,350
1,800
1,800
4.1
4.1
5.9
5.9
7.8
7.8
67-3/10
67-3/10
95-3/10
95-3/10
123-3/10
123-3/10
25
25
25
25
25
25
22-7/8
22-7/8
22-7/8
22-7/8
22-7/8
22-7/8
Connections
(in.)
Inlet
Suction
ODF
ODF
1-1/8
1-1/8
1-1/8
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-5/8
1-3/8
1-5/8
Approx.
Net Wt.
(lbs.)
173
188
207
234
262
295
15
Warehouse/Industrial Evaporators
Warehouse/Industrial Air Defrost Unit Coolers
Model LHA is ideal for warehouse cooler/freezer applications.
With a wide capacity range and the patented Thermo-Flex™ coil
design, these large unit coolers provide efficient, reliable operation.
Features include an aluminum cabinet with bonded white enamel
finish, 850 RPM motors for low noise and reliability, liquid line
solenoid wiring harness for faster installation, Schrader fitting
for easier suction temperature measurement. Also, the large unit
coolers have captive fasteners on access panels for easy servicing
— no fumbling with loose bolts and nuts. The LH Series also has
a standardized terminal board for easier field wiring.
Options include totally enclosed motors, long air throw collars
for large Warehouse/Industrial applications and insulated drain
pans. PSC motors come standard to help you save energy.
Model LHA – Warehouse/Industrial Air Defrost Unit Coolers
BTUH
10°F
TD
CFM
LHA6520
LHA6630
LHA6750
LHA6850
LHA6930
LHA61100
LHA61170
LHA61400
LHA61610
LHA61900
LHA62200
LHA62440
52,000
63,000
75,000
85,000
93,000
110,000
117,000
140,000
161,000
190,000
220,000
244,000
9,000
9,000
12,600
12,600
16,800
16,800
20,700
20,700
24,300
26,550
30,400
35,400
2
2
3
3
4
4
3
3
3
3
4
4
6.4
6.4
9.6
9.6
12.8
12.8
-
5.5
5.5
8.7
8.7
-
5.2
5.2
7.8
7.8
10.4
10.4
13.8
13.8
19.8
21.0
26.4
28.0
3.4
3.4
-
LHA82160
LHA82500
LHA82780
216,000 25,950
250,000 29,600
278,000 34,600
3
4
4
-
-
21.0
26.4
28.0
-
16
Dimensions
(in.)
Motor
LHA
Model
208-230/1/60
Qty. Wired Wired
1 ph. 3 ph.
460/1/60
208-230
460
575
Wired Wired
/3/60
/3/60 /3/60
1 ph. 3 ph.
L
LHA Models 6 Fins Per Inch
2.6
1.8
83-3/32
2.6
1.8
83-3/32
3.0
3.9
2.7
105-5/32
3.0
3.9
2.7
105-5/32
4.7
5.2
3.6
135-7/32
4.7
5.2
3.6
135-7/32
6.9
7.8 135-13/32
6.9
7.8 135-13/32
9.9
7.8 135-13/32
10.5
8.4
142-1/2
13.2
10.4
185-1/2
14.0
11.2
185-1/2
LHA Models 8 Fins Per Inch
10.5
8.4
142-1/2
13.2
10.4
185-1/2
14.0
11.2
185-1/2
Connections
(in.)
Approx.
Net Wt.
Ext.
Suction
Drain
(lbs.)
Equal.
ODF
FPT
ODF
H
D
Coil
Inlet
ODF
37-3/16
37-3/16
37-3/16
37-3/16
37-3/16
37-3/16
44-1/2
44-1/2
50-7/32
50-7/32
44-1/2
50-7/32
26-1/4
26-1/4
26-1/4
26-1/4
26-1/4
26-1/4
35-21/32
35-21/32
35-21/32
35-21/32
35-21/32
35-21/32
1-3/8
1-3/8
1-3/8
1-5/8
1-3/8
1-5/8
1-5/8
1-5/8
(2) 1-3/8
1-3/8
1-3/8
1-5/8
1-5/8
1-5/8
2-1/8
2-1/8
2-1/8
2-1/8
2-1/8
2-1/8
(2) 2-1/8
2-5/8
2-5/8
2-5/8
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
(2) 1/4
1/4
1/4
1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
270
300
390
430
515
565
738
800
850
1,160
1,500
1,600
50-7/32
44-1/2
50-7/32
35-21/32
35-21/32
35-21/32
1-3/8
1-3/8
1-3/8
2-5/8
2-5/8
2-5/8
1/4
1/4
1/4
1-1/4
1-1/4
1-1/4
1,160
1,500
1,600
Warehouse/Industrial Evaporators
Warehouse/Industrial Electric Defrost Unit Coolers
Models LHE/LHL are ideal for warehouse cooler/freezer
applications. With a wide capacity range and the patented
Thermo-Flex ™ coil design, these large unit coolers provide
efficient, reliable operation. Features include an aluminum
cabinet with bonded white enamel finish, 850 RPM motors for
low noise and reliability, liquid line solenoid wiring harness for
faster installation, Schrader fitting for easier suction temperature
measurement. Also, the large unit coolers have captive fasteners
on access panels for easy servicing — no fumbling with loose
bolts and nuts. The LH Series also has a standardized terminal
board for easier field wiring.
Options include high CFM motor and fan combinations, totally
enclosed motors, low temp motors for blast cooling and freezing,
long air throw collars for large Warehouse/Industrial applications
and insulated drain pans. PSC motors come standard to help
you save energy.
Models LHE/LHL – Warehouse/Industrial Electric Defrost Unit Coolers
Motor
LHE/LHL
Model
BTUH
10°F
TD
CFM
LHE6450
LHE6550
LHE6640
LHE6740
LHE6810
LHE6950
LHE61020
LHE61200
LHE61390
LHE61650
LHE62120
45,000
55,000
64,000
74,000
81,000
95,000
102,000
120,000
139,000
165,000
212,000
9,000
9,000
12,600
12,600
16,800
16,800
20,700
20,700
24,300
26,550
35,400
LHL4400
LHL4480
LHL4560
LHL4650
LHL4710
LHL4840
LHL4890
LHL41050
LHL41220
LHL41440
LHL41860
40,000
48,000
56,000
65,000
71,000
84,000
89,000
105,000
122,000
144,000
186,000
9,400
9,400
13,200
13,200
17,600
17,600
21,600
21,600
25,200
27,600
36,800
208-230/1/60
460/1/60
208-230
460
575
Qty. Wired Wired
Wired Wired
L
/3/60
/3/60 /3/60
1 ph. 3 ph.
1 ph. 3 ph.
LHE Models 6 Fins Per Inch
2
6.4
5.2
3.4
2.6
1.8
83-3/32
2
6.4
5.2
3.4
2.6
1.8
83-3/32
3
5.5
7.8
3.0
3.9
2.7
105-5/32
3
5.5
7.8
3.0
3.9
2.7
105-5/32
4
8.7
10.4
4.7
5.2
3.6
135-7/32
4
8.7
10.4
4.7
5.2
3.6
135-7/32
3
13.8
6.9
7.8 135-13/32
3
13.8
6.9
7.8 135-13/32
3
19.8
9.9
7.8 135-13/32
3
21.0
10.5
8.4
142-1/2
4
28.0
14.0
11.2
185-1/2
LHL Models 4 Fins Per Inch
2
6.4
5.2
3.4
2.6
1.8
83-3/32
2
6.4
5.2
3.4
2.6
1.8
83-3/32
3
5.5
7.8
3.0
3.9
2.7
105-5/32
3
5.5
7.8
3.0
3.9
2.7
105-5/32
4
8.7
10.4
4.7
5.2
3.6
135-7/32
4
8.7
10.4
4.7
5.2
3.6
135-7/32
3
13.8
6.9
7.8 135-13/32
3
13.8
6.9
7.8 135-13/32
3
19.8
9.9
7.8 135-13/32
3
21.0
10.5
8.4
142-1/2
4
28.0
14.0
11.2
185-1/2
Dimensions
(in.)
Connections
(in.)
Approx.
Net Wt.
(lbs.)
Drain
H
D
Coil
Inlet
Suction
Ext.
Equal.
37-3/16
37-3/16
37-3/16
37-3/16
37-3/16
37-3/16
44-1/2
44-1/2
50-7/32
50-7/32
50-7/32
26-1/4
26-1/4
26-1/4
26-1/4
26-1/4
26-1/4
35-21/32
35-21/32
35-21/32
35-21/32
35-21/32
1-1/8
1-1/8
1-3/8
1-5/8
1-3/8
1-3/8
1-3/8
1-5/8
(2) 1-3/8
1-5/8
1-5/8
1-5/8
1-5/8
2-1/8
2-1/8
2-1/8
2-1/8
2-1/8
2-1/8
(2) 2-1/8
2-5/8
2-5/8
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
(2) 1/4
1/4
1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
280
310
405
445
535
585
753
815
865
1,175
1,620
37-3/16
37-3/16
37-3/16
37-3/16
37-3/16
37-3/16
44-1/2
44-1/2
50-7/32
50-7/32
50-7/32
26-1/4
26-1/4
26-1/4
26-1/4
26-1/4
26-1/4
35-21/32
35-21/32
35-21/32
35-21/32
35-21/32
1-1/8
1-1/8
1-3/8
1-5/8
1-3/8
1-5/8
1-3/8
1-5/8
(2) 1-3/8
1-5/8
1-5/8
1-5/8
1-5/8
2-1/8
2-1/8
2-1/8
2-1/8
2-1/8
2-1/8
(2) 2-1/8
2-5/8
2-5/8
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
(2) 1/4
1/4
1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
277
306
400
440
528
578
744
805
854
1,160
1,600
17
Warehouse Evaporators
Warehouse/Industrial Hot Gas Defrost Unit Coolers
Models LHG/LHF are large hot gas defrost unit coolers that
are ideal for warehouse cooler/freezer applications. With a wide
capacity range and the patented Thermo-Flex™ coil design, these
large unit coolers provide efficient, reliable operation. Features
include an aluminum cabinet with bonded white enamel finish,
850 RPM motors for low noise and reliability, liquid line solenoid
wiring harness for faster installation, Schrader fitting for easier
suction temperature measurement. Also, the large unit coolers
have captive fasteners on access panels for easy servicing — no
fumbling with loose bolts and nuts. The LH Series also has a
standardized terminal board for easier field wiring.
Options include high CFM motor and fan combinations, totally
enclosed motors, low temp motors for blast cooling and freezing,
long air throw collars for large Warehouse/Industrial applications
and insulated drain pans. Also, optional field or factory-installed
hot gas kits are available. PSC motors come standard to help
you save energy.
Models LHG/LHF – Warehouse/Industrial Hot Gas Defrost Unit Coolers
BTUH
10°F
TD
CFM
LHG6450
LHG6550
LHG6640
LHG6740
LHG6810
LHG6950
LHG61020
LHG61200
LHG61390
LHG61650
LHG62120
45,000
55,000
64,000
74,000
81,000
95,000
102,000
120,000
139,000
165,000
212,000
9,000
9,000
12,600
12,600
16,800
16,800
20,700
20,700
24,300
26,550
35,400
2
2
3
3
4
4
3
3
3
3
4
6.4
6.4
-
5.5
5.5
8.7
8.7
-
5.2
5.2
7.8
7.8
10.4
10.4
13.8
13.8
19.8
21.0
28.0
3.4
3.4
-
3.0
3.0
4.7
4.7
-
LHF4400
LHF4480
LHF4560
LHF4650
LHF4710
LHF4840
LHF4890
LHF41050
LHF41220
LHF41440
LHF41860
40,000
48,000
56,000
65,000
71,000
84,000
89,000
105,000
122,000
144,000
186,000
9,400
9,400
13,200
13,200
17,600
17,600
21,600
21,600
25,200
27,600
36,800
2
2
3
3
4
4
3
3
3
3
4
6.4
6.4
-
5.5
5.5
8.7
8.7
-
5.2
5.2
7.8
7.8
10.4
10.4
13.8
13.8
19.8
21.0
28.0
3.4
3.4
-
3.0
3.0
4.7
4.7
-
18
Dimensions
(in.)
Motor
LHG/LHF
Model
208-230/1/60
460/1/60
208-230
460 575
Qty. Wired Wired
Wired Wired
/3/60
/3/60 /3/60
1 ph. 3 ph.
1 ph. 3 ph.
L
H
LHG Models 6 Fins Per Inch
2.6
1.8
83-3/32 37-3/16
2.6
1.8
83-3/32 37-3/16
3.9
2.7
105-5/32 37-3/16
3.9
2.7
105-5/32 37-3/16
5.2
3.6
135-7/32 37-3/16
5.2
3.6
135-7/32 37-3/16
6.9
7.8 135-13/32 44-1/2
6.9
7.8 135-13/32 44-1/2
9.9
7.8 135-13/32 50-7/32
10.5
8.4
142-1/2 50-7/32
14.0 11.2
185-1/2 50-7/32
LHF Models 4 Fins Per Inch
2.6
1.8
83-3/32 37-3/16
2.6
1.8
83-3/32 37-3/16
3.9
2.7
105-5/32 37-3/16
3.9
2.7
105-5/32 37-3/16
5.2
3.6
135-7/32 37-3/16
5.2
3.6
135-7/32 37-3/16
6.9
7.8 135-13/32 44-1/2
6.9
7.8 135-13/32 44-1/2
9.9
7.8 135-13/32 50-7/32
10.5
8.4
142-1/2 50-7/32
14.0 11.2
185-1/2 50-7/32
Connections
(in.)
D
Ext.
Hot Gas
Coil Inlet Suction
Drain
Equal.
Side Port
Hot Gas
Drn Pan
Ref Conn
Approx.
Net Wt.
(lbs.)
26-1/4
1-3/8
26-1/4
1-3/8
26-1/4
1-3/8
26-1/4
1-5/8
26-1/4
1-3/8
26-1/4
1-5/8
35-21/32 1-5/8
35-21/32 1-5/8
35-21/32 (2) 1-3/8
35-21/32 (2) 1-3/8
35-21/32 (2) 1-3/8
1-5/8
1/4
1-1/4
1-5/8
1/4
1-1/4
2-1/8
1/4
1-1/4
2-1/8
1/4
1-1/4
2-1/8
1/4
1-1/4
2-1/8
1/4
1-1/4
2-1/8
1/4
1-1/4
2-1/8
1/4
1-1/4
(2) 2-1/8 (2) 1/4 1-1/4
(2) 2-5/8 (2) 1/4 1-1/4
(2) 2-5/8 (2) 1/4 1-1/4
7/8
7/8
7/8
1-1/8
7/8
1-1/8
1-1/8
1-1/8
(2) 7/8
(2) 1-1/8
(2) 1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-3/8
1-3/8
1-3/8
1-5/8
1-5/8
280
310
405
445
535
585
753
815
865
1,175
1,620
26-1/4
1-3/8
26-1/4
1-3/8
26-1/4
1-3/8
26-1/4
1-5/8
26-1/4
1-3/8
26-1/4
1-5/8
35-21/32 1-5/8
35-21/32 1-5/8
35-21/32 (2) 1-3/8
35-21/32 (2) 1-3/8
35-21/32 (2) 1-3/8
1-5/8
1/4
1-1/4
1-5/8
1/4
1-1/4
2-1/8
1/4
1-1/4
2-1/8
1/4
1-1/4
2-1/8
1/4
1-1/4
2-1/8
1/4
1-1/4
2-1/8
1/4
1-1/4
2-1/8
1/4
1-1/4
(2) 2-1/8 (2) 1/4 1-1/4
(2) 2-5/8 (2) 1/4 1-1/4
(2) 2-5/8 (2) 1/4 1-1/4
7/8
7/8
7/8
1-1/8
7/8
1-1/8
1-1/8
1-1/8
(2) 7/8
(2) 7/8
(2) 7/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-3/8
1-3/8
1-3/8
1-5/8
1-5/8
277
306
400
440
528
578
744
805
854
1,160
1,600
Ripening Room Evaporator
Ripening Room Unit Coolers
Model LPR ceiling mounted units are specifically designed to meet
the rigid requirements of many types of ripening rooms. These units
include statically and dynamically balanced AMA rated, forwardcurved centrifugal fans; a DX copper tube aluminum fin cooling coil
and an optional heater section with noncorrosive heaters.
The blower motor and heater are available for 208/3/60, 230/3/60
or 460/3/60 power supply characteristics. For 50 cycle components
are also available on special order.
Units can be controlled with either conventional type control panels,
described below, or by the combined use of the control panel and
a temperature-recording programmer.
Features
• Heavy gauge, galvanized steel base rails with 11/16” diameter mounting holes
• Cabinet panels are die-formed galvanized steel
• Heavy gauge frames
• Fan bearings are rugged, self-aligning ball bearings selected for an average service life of more than 200,000 hours
• Coils have plate-type aluminum fins with full collars on expanded copper tubes
• Two safety thermostats, manual and automatic reset, are provided with the optional heater section to prevent overheating
• Single-speed, open drip-proof, ball bearing motors
• Dependable accurate ratings
208/
3/60*
LPR Model
230/
460/
3/60*
3/60*
5,465
5,565
5,665
10,465
10,565
10,665
5,469
5,569
5,669
10,469
10,569
10,669
LPR Model
208/
230/
3/60*
3/60*
5,463
5,563
5,663
10,463
10,563
10,663
5,445
5,545
5,645
10,445
10,545
10,645
5,443
5,543
5,643
10,443
10,543
10,643
5,449
5,549
5,649
10,449
10,549
10,649
460/
3/60*
MBH 550 FPM
65-55
50-40
35-25
90% RH 90% RH 90% RH
Rows
Deep
Motor
CFM
HP
Qty.
LPR Models 6 Fins Per Inch
38.1
34.7
32.2
4
7,800
2
1
46.3
41.7
38.4
5
7,800
2
1
50.6
46.1
42.7
6
7,800
2
1
81.4
73.9
68.5
4
15,600
2
2
98.7
88.7
81.4
5
15,600
2
2
111.4
100.0
91.9
6
15,600
2
2
MBH 600 FPM
Motor
Rows
55-40
55-45
35-25
Deep
CFM
HP Qty.
85% RH 90% RH 90% RH
50.1
60.6
68.9
106.2
128.2
147.4
30.5
37.3
41.5
65.1
79.4
90.6
27.0
32.7
36.6
57.3
69.3
79.2
LPR Models 4 Fins Per Inch
4
7,800
2
1
5
7,800
2
1
6
7,800
2
1
4
15,600
2
2
5
15,600
2
2
6
15,600
2
2
Connections (in.)
Inlet
Suction
OD
OD
7/8
1-1/8
7/8
1-1/8
7/8
1-3/8
1-1/8
1-3/8
1-1/8
1-5/8
1-3/8
1-5/8
Connections (in.)
Inlet
Suction
OD
OD
7/8
7/8
7/8
1-1/8
1-1/8
1-3/8
1-1/8
1-1/8
1-3/8
1-3/8
1-5/8
1-5/8
Dimensions (in.)
L
H
D
55
38-3/4 64-1/8
55
38-3/4 64-1/8
55
38-3/4 64-1/8
102
38-3/4 64-1/8
102
38-3/4 64-1/8
102
38-3/4 64-1/8
Dimensions (in.)
Approx.
Ship Wt.
(lbs.)
475
505
535
950
1,010
1,070
L
H
D
Approx.
Ship Wt.
(lbs.)
55
55
55
102
102
102
38-3/4
38-3/4
38-3/4
38-3/4
38-3/4
38-3/4
64-1/8
64-1/8
64-1/8
64-1/8
64-1/8
64-1/8
485
515
545
970
1,030
1,090
Ripening Room Control Panel Features
Panel
Model
Voltage
1015A
1013A
2029A
2023A
3039A
3033A
4055A
4013A
208
460
230
460
230
460
208
460
•
•
•
•
•
•
•
•
•
•
•
Evaporator
Heater
Contactor
Yes
Yes
Yes
Yes
1000 Series do not have heater contactors
2000 Series have heater contactors
One Piece Panel
Heavy gauge steel casing with baked enamel finish
Key locks provided for control access doors
All components factory mounted and wired
Main fused disconnect with safety interlock handle
Control circuit fuse block
Evaporator fan contactor
460/230 volt control circuit transformer for 460 volt operation
Solid-state thermostat with 50 feet of sensor lead
LED indicator lights
Controls and lights fully visible through inspection window(s)
Four position rotary-type mode selector switch
1. Cooling with continuous fan
2. Cooling with fan and com­pressor cycling­ ­ together
3. Fan only
4. Heating with continuous fan
• Compatible for use with parlow recording ­ programmer
• All field wiring connections made to numbered terminal boards
• Evaporator heater contactor (optional)
19
™
Beacon II™ Refrigeration System is Larkin’s
•
•
•
•
•
•
patented, pre-assembled, factory-installed refrigeration
system featuring an integrated microcomputer-based
electronic control board. Beacon II™ offers:
Complete factory installation, wiring and testing, saving time and money
Simplified field electrical connections and 24 volt wiring between condenser and
evaporator coil
Preset factory superheat allows the system to run more efficiently and reduces
future adjustments
Monitors and controls box temperature, evaporator superheat, system status
and defrost
Monitor and make system changes remotely via modem with exclusive Beacon II™
Smart II software with Beacon II™ Smart Controller
Data-logging capabilities with Smart Controller
Beacon II™ Smart Controller is an optional system monitoring
and programming control device. It allows for adjustments to be
made at the push of a button from a conveniently mounted location.
Beacon II™ Smart Controller also allows you to monitor and make
changes to the refrigeration system via modem connection from
anywhere in the world. One Smart Controller can program and
control up to four condensing units with up to four evaporators on
each system.
The patented Beacon II™ Smart Defrost system available with Beacon II™ Smart
Controller is uniquely designed to predict frost accumulation and initiate defrosts only
when needed. It also initiates defrosts to react to operation anomalies, like product
deliveries and product pull-down. Typical electric defrost systems have four defrosts per
day. Using the Smart Defrost system can reduce the number of defrosts to zero, one or
two per day. That’s a 75 percent reduction on average, greatly reducing the amount of
energy used and operating costs.
Beacon II™ Smart II Software makes it easy to adjust and monitor one or more
refrigeration systems as well as capture minute-by-minute system conditions. This
Windows®-based software allows you to connect to the Beacon II™ Smart Controller from
anywhere in the world to monitor the systems, make adjustments and log real-time
system conditions. This data-logging capability is critical in the food-service industry.
20
Indoor Packaged Refrigeration System
Larkin brings you the simplest, most reliable solution for walk-in refrigeration systems in a single package! The
PRO3 (’pro ’kyübd) system comes ready to mount on top of the cooler or freezer and requires minimal space. The
evaporator section is outside of the box, allowing for maximum use of refrigerated space inside the box.
Reliability/Durability
Ease of Installation
• System is fully assembled at the factory • Simple, quick installation with no piping or
and backed up by Larkin’s superior loose components to install gives you savings
quality control
on labor
• Electronic controls provide accurate
temperature control
• Installation takes a fraction of the time required
for a split system
• Liquid line filter drier
(medium and large cabinet only)
• Evaporator grill mounts flush to or recessed in
a standard 4” ceiling panel to allow for more
storage in the cooler or freezer
• Two-year parts warranty
Performance Data
Coolers - Air Defrost Systems
Model
PTN024H2
PTN029H2
PTN040H2
PTN047H2
PTN063H2
PTN072H2
PTN099H2
PTN128H2
• Models come with a condensate evaporation
pan, eliminating the need for a drain line
Ease of Use
• Most models come with a 26” power
cord ready to plug in
• System is factory assembled,
evacuated, charged, run
tested and wired; no additional
components required
• Controls preset for typical
applications, 35°F for coolers, -10°F
for freezers, and are easy to adjust
(019L6 set for 0°F)
Freezers - Electric Defrost Systems
90°F Ambient
90°F Ambient
35°F
38°F
Box Temp. Box Temp.
2,630
2,740
3,170
3,290
4,380
4,500
5,150
5,480
6,910
7,340
7,890
8,330
10,850
11,730
14,030
15,010
Model
PTN019L6
PTN021L6
PTN031L6
PTN044L6
PTN052L6
PTN069L6
0°F
-10°F
-20°F
Box Temp. Box Temp. Box Temp.
2,640
2,860
4,500
6,260
7,470
9,670
2,300
3,400
4,830
5,720
7,850
1,430
2,200
3,630
4,170
5,600
Electrical Data
Model
Voltage
MCA
MOPD
Unit
Amps
Evap.
CFM
Plug
Supplied
PTN024H2A
PTN029H2A
PTN040H2A
PTN047H2A
PTN047H2B
PTN063H2B
PTN072H2B
PTN099H2B
PTN099H2C
PTN128H2B
PTN128H2C
PTN019L6A
PTN021L6A
PTN021L6B
PTN031L6B
PTN044L6B
PTN052L6B
PTN052L6C
PTN069L6B
PTN069L6C
115/1/60
115/1/60
115/1/60
115/1/60
208-230/1/60
208-230/1/60
208-230/1/60
208-230/1/60
208-230/3/60
208-230/1/60
208-230/3/60
115/1/60
115/1/60
208-230/1/60
208-230/1/60
208-230/1/60
208-230/1/60
208-230/3/60
208-230/1/60
208-230/3/60
10.2
10.6
11.7
16.9
8.6
9.8
10.9
17.1
14.7
20.1
14.1
13.0
13.9
7.6
13.8
15.9
17.7
12.2
23.8
15.9
15
15
15
20
15
15
15
20
20
30
20
20
20
15
15
20
20
15
30
20
8.7
9.0
9.9
14.2
7.3
8.4
9.3
14.7
13.3
17.1
12.8
11.0
11.8
6.5
11.6
13.3
15.3
11.3
20.0
14.2
340
340
340
350
350
550
500
875
875
825
825
340
350
350
550
520
900
900
875
875
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
-
Matching
NEMA
Receptacle
5-20R
5-20R
5-20R
5-20R
6-15R
6-15R
6-15R
6-20R
5-20R
5-20R
6-15R
6-15R
6-20R
6-20R
-
Approx.
Net Wt.
(lbs./Kg.)
88
40
90
41
92
42
192
87
192
87
207
94
211
95
270
122
265
120
290
132
285
129
101
46
213
97
213
97
221
100
225
102
275
125
270
122
280
127
275
125
21
Condensing Units
1/2 - 5 HP Indoor or Outdoor Condensing Units with Semi-Hermetic Compressors
Model LS condensing units are ideal for convenience store, restaurant and
other commercial applications. The units feature a semi-hermetic refrigeration
compressor, which is spring-mounted with vibration eliminators. Also, these
condensing units have an oversized aluminum fin/copper tube condenser that
works in high ambients, encapsulated auto-reset high pressure controls to
eliminate leaks, prepainted G90 galvanized steel cabinet for superior strength
and corrosion protection, and suction and discharge service valves. UL listed for
US and Canada. PSC motors come standard to help you save energy.
LS – 1/2 - 6 HP Indoor or Outdoor Condensing Units with Semi-Hermetic Compressors
LS
Model
LS*005H2
LS*008H2
LS*008M2
LS*010H2
LS*010M2
LS*015H2
LS*020H2
LS*020M2
LS*021M2
LS*029M2
LS*030H2
LS*030M2
LS*040H2
LS*050H2
LS*050M2
LS*005M6
LS*010M6
LS*020M6
LS*021M6
LS*030M6
LS*040M6
LS*005L2
LS*008L2
LS*010L2
LS*020L2
LS*021L2
LS*030L2
LS*005L6
LS*008L6
LS*010L6
LS*015L6
LS*020L6
LS*021L6
LS*027L6
LS*030L6
LS*030E6
LS*040L6
Compressor
HAG0050
KAN0075
KAE0075
KAR0100
KAM0100
KAG0150
ERA0200
KAK0200
ERC0200
ERF0310
ERF0310
3RA0310
NRB0400
NRA0500
NRM0500
HAJ005E
KAR010E
KAK020E
ERC021E
ERF031E
NRB040E
KA0050
KAM0075
KAJ0100
EAD0200
EAV0210
LAH0310
KAN005E
KAM007E
KAJ010E
KAL015E
EAD020E
EAV021E
3AB031E
LAH032E
LAC032E
NRD040E2
NRD032E3
Refrigerant
Suction
Temp.
Medium
& High
Temp.
R-22
25°F
Medium
Temp.
R-404A
/507
25°F
Low
Temp.
R-22
-10°F
Low
Temp.
R-404A
/507
-10°F
BTUH
95°F
Ambient
4,430
6,920
7,910
9,260
10,690
12,230
16,210
16,530
17,640
24,720
26,800
32,290
38,950
44,690
51,590
5,210
9,750
16,240
20,060
29,690
39,240
2,560
4,560
5,630
9,580
11,010
15,630
2,580
4,320
5,790
8,920
9,870
11,280
13,210
16,930
22,530
* = T for outdoor, N for indoor, S for Beacon II™
1
Minimum Circuit Amps - Air Defrost Type Unit
2
NRD1-040E compressor is single-phase and uses R-404A only
3
Uses R-404A and 507 in three-phase model
22
Connections (in.)
Liquid Suction
IDS
IDS
3/8
1/2
3/8
5/8
3/8
5/8
3/8
5/8
3/8
5/8
3/8
7/8
3/8
7/8
3/8
7/8
3/8
7/8
1/2
7/8
1/2
7/8
1/2
7/8
1/2
1-1/8
1/2
1-1/8
1/2
1-1/8
3/8
1/2
3/8
5/8
3/8
7/8
3/8
7/8
1/2
7/8
1/2
1-1/8
3/8
1/2
3/8
5/8
3/8
5/8
3/8
7/8
3/8
7/8
1/2
7/8
3/8
1/2
3/8
5/8
3/8
5/8
3/8
7/8
3/8
7/8
3/8
7/8
1/2
7/8
1/2
7/8
1/2
7/8
1/2
1-1/8
Minimum Circuit Ampacity1
208208460/3 230/1
230/1 230/3
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
21
20
15
23
20
15
24
28
15
25
15
31
15
15
15
15
15
15
15
15
20
15
23
28
15
15
15
15
15
15
15
15
20
15
15
15
15
20
15
15
15
15
15
15
15
15
15
15
15
20
15
15
15
15
20
15
20
20
15
15
20
-
22
15
35
Dimensions (in.)
L
H
D
23-3/4
23-3/4
23-3/4
23-3/4
23-3/4
37-3/4
37-3/4
37-3/4
37-3/4
37-3/4
42-1/2
42-1/2
42-1/2
42-1/2
42-1/2
23-3/4
23-3/4
37-3/4
37-3/4
42-1/2
42-1/2
23-3/4
23-3/4
23-3/4
37-3/4
37-3/4
37-3/4
23-3/4
23-3/4
23-3/4
37-3/4
37-3/4
37-3/4
37-3/4
37-3/4
37-3/4
17-1/4
17-1/4
17-1/4
17-1/4
17-1/4
17-1/4
17-1/4
17-1/4
17-1/4
19-3/4
29-3/4
29-3/4
29-3/4
29-3/4
29-3/4
17-1/4
17-1/4
17-1/4
17-1/4
29-3/4
29-3/4
17-1/4
17-1/4
17-1/4
17-1/4
17-1/4
19-3/4
17-1/4
17-1/4
17-1/4
17-1/4
17-1/4
17-1/4
19-3/4
19-3/4
19-3/4
28-1/4
28-1/4
28-1/4
28-1/4
28-1/4
28-1/4
28-1/4
28-1/4
28-1/4
28-1/4
30-1/4
30-1/4
30-1/4
30-1/4
30-1/4
28-1/4
28-1/4
28-1/4
28-1/4
30-1/4
30-1/4
28-1/4
28-1/4
28-1/4
28-1/4
28-1/4
28-1/4
28-1/4
28-1/4
28-1/4
28-1/4
28-1/4
28-1/4
28-1/4
28-1/4
28-1/4
Approx.
Net Wt.
(lbs.)
170
181
189
191
191
220
286
224
286
318
377
377
431
431
431
175
190
224
293
370
442
181
189
181
281
286
345
186
185
192
218
286
284
331
336
336
42-1/2
29-3/4
30-1/4
458
Condensing Units
1/2 - 5 HP Indoor or Outdoor Condensing Units
with Hermetic Compressors
Model LH condensing units feature a hermetic refrigeration compressor with oversized
condenser. Also, the LH Series condensing units have a shut off valve in the discharge line
of the hermetic compressor for easier compressor changes. UL listed for US and Canada.
PSC motors come standard to help you save energy.
LH – 1/2 - 5 HP Indoor or Outdoor Condensing Units with Hermetic Compressors
LH
Model
Compressor
LH*005H2
LH*008H2
LH*010H2
LH*015H2
LH*020H2
LH*029M2
LH*030H2
LH*040H2
LH*050H2
LH*005X6
LH*008X6
LH*009X6
LH*010X6
LH*015X6
LH*020X6
LH*025X6
LH*030X6
LH*032X6
LH*040X6
LH*050X6
LH*011L6
LH*014L6
LH*019L6
LH*025L6
LH*031L6
ART82C1
RS64C2
RS70C1
CR18KQ
CR24KQ
CR37KQ
CR37KQ
CR53KQ
CRN0500
RS43C2E
RS55C2E
RS64C2E
RS70C1E
CS10K6E
CS12K6E
CS14K6E
CS18K6E
CS20K6E
CS27K6E
CS33K6E
CF04K6E
CF06K6E
CF06K6E
CF09K6E
CF12K6E
Refrigerant Suction
Temp.
Medium
& High
Temp
R-22
25°F
Extended
Temp
R404A/507
25°F
Low Temp
R404A/507
-10°F
BTUH
95°F
Ambient
5,960
8,350
9,500
12,910
16,910
23,930
28,090
38,840
44,050
5,100
7,590
8,580
9,110
13,830
15,740
17,190
27,010
29,540
37,270
42,460
5,289
7,790
8,710
13,150
15,909
Connections (in.)
Liquid
Suction
IDS
IDS
3/8
1/2
3/8
1/2
3/8
5/8
3/8
5/8
3/8
7/8
1/2
7/8
1/2
7/8
1/2
1-1/8
1/2
1-1/8
3/8
1/2
3/8
1/2
3/8
5/8
3/8
5/8
3/8
5/8
3/8
7/8
3/8
7/8
1/2
7/8
1/2
7/8
1/2
1-1/8
1/2
1-1/8
3/8
5/8
3/8
5/8
3/8
5/8
3/8
7/8
1/2
7/8
Unit MCA1
208- 208- 460/3
230/1 230/3
15
15
15
15
15
15
15
20
15
15
21.8
15
15
24.3
20
15
36
23.9
15
42
28
15
15
15
15
15
15
15
15
15
15
15
15
15
21
15
15
24
20
15
30.3
20.7
15
38
24.5
15
15
15
15
15
15
15
20
15
22.3
15
15
Dimensions (in.)
L
H
D
Approx.
Net Wt.
(lbs.)
23-3/4
23-3/4
23-3/4
37-3/4
37-3/4
37-3/4
42-1/2
42-1/2
42-1/2
23-3/4
23-3/4
23-3/4
23-3/4
37-3/4
37-3/4
37-3/4
42-1/2
42-1/2
42-1/2
42-1/2
23-3/4
23-3/4
37-3/4
37-3/4
37-3/4
17-1/4
17-1/4
17-1/4
17-1/4
17-1/4
19-3/4
29-3/4
29-3/4
29-3/4
17-1/4
17-1/4
17-1/4
17-1/4
17-1/4
17-1/4
17-1/4
29-3/4
29-3/4
29-3/4
29-3/4
17-1/4
17-1/4
17-1/4
17-1/4
19-3/4
28-1/4
28-1/4
28-1/4
28-1/4
28-1/4
28-1/4
30-1/4
30-1/4
30-1/4
28-1/4
28-1/4
28-1/4
28-1/4
28-1/4
28-1/4
28-1/4
30-1/4
30-1/4
30-1/4
30-1/4
28-1/4
28-1/4
28-1/4
28-1/4
28-1/4
134
146
145
186
188
209
264
272
286
149
149
152
146
193
193
194
271
272
272
276
159
160
200
209
217
* = T for outdoor, N for indoor, S for Beacon II™
1
Minimum Circuit Amps - Air Defrost Type Unit
2 - 6 HP Indoor or Outdoor Condensing Units with Scroll® Compressors
Model LZ condensing units feature a complete line of Copeland’s Scroll®
compressors. These condensing units have an oversized condenser which allows
units to operate in high ambient for 35°F boxes and below. UL listed for US and
Canada. PSC motors come standard to help you save energy.
LZ – 2 - 6 HP Outdoor Condensing Units with Scroll® Compressors
LZ
Model
Compressor
LZ*020M6
LZ*025M6
LZ*030M6
LZ*035M6
LZ*045M6
LZ*055M6
LZ*060M6
LZ*020L6
LZ*025L6
LZ*030L6
LZ*035L6
LZ*045L6
LZ*055L6
LZ*060L6
ZS15K4E
ZS19K4E
ZS21K4E
ZS26K4E
ZS30K4E
ZS38K4E
ZS45K4E
ZF06K4E
ZF08K4E
ZF09K4E
ZF11K4E
ZF13K4E
ZF15K4E
ZF18K4E
Refrigerant Suction
Temp.
Medium
Temp
R-404A
/507/222
25°F
Low
Temp
R-404A
/507/222
-10°F
BTUH
95°F
Ambient
18,930
22,490
27,270
32,820
38,230
45,160
52,340
9,540
11,850
13,200
15,860
20,410
24,650
28,970
Connections (in.)
Liquid
Suction
IDS
IDS
1/2
7/8
1/2
7/8
1/2
7/8
1/2
7/8
1/2
1-1/8
1/2
1-1/8
1/2
1-1/8
1/2
7/8
1/2
7/8
1/2
7/8
1/2
7/8
1/2
1-1/8
1/2
1-1/8
1/2
1-1/8
Unit MCA1
208- 208230/1 230/3 460/3
20
15
15
20
15
15
22
20
15
27
20
15
34
20
15
40
28
15
30
15
20
15
15
20
15
15
20
15
15
24
20
15
34
20
15
40
28
15
30
15
Dimensions (in.)
L
H
D
37-3/4
37-3/4
42-1/2
42-1/2
42-1/2
42-1/2
42-1/2
37-3/4
37-3/4
37-3/4
37-3/4
42-1/2
42-1/2
42-1/2
19-3/4
19-3/4
29-3/4
29-3/4
29-3/4
29-3/4
29-3/4
19-3/4
19-3/4
19-3/4
19-3/4
29-3/4
29-3/4
29-3/4
28-1/4
28-1/4
30-1/4
30-1/4
30-1/4
30-1/4
30-1/4
28-1/4
28-1/4
28-1/4
28-1/4
30-1/4
30-1/4
30-1/4
Approx.
Net Wt.
(lbs.)
194
203
262
265
282
291
292
194
203
197
200
282
291
292
* = T for outdoor, N for indoor, S for Beacon II™
Minimum Circuit Amps - Air Defrost Type Unit
2
For R-22 model capacity information, see product bulletin
1
23
Condensing Units
3 - 22 HP Indoor or Outdoor Condensing Units with Discus® or Scroll® Compressors
Model LD/LZ condensing unit’s enhanced grill design gives up to 40% more free-air area than before
and its vertical receiver needs less refrigerant to ensure a solid column of liquid reaches the expansion
valve. Fan motors and serviceable components are accessible through the front grill for quick service and
the sight glass is conveniently placed so that charging is quick, easy and accurate. Thorough cleaning of
the coil is easier because the unit’s top is one piece and lighter for easy removal. A liquid base valve and
suction service tap is placed on the outside of the cabinet for easy pump-downs and quick diagnosis.
The footprint is smaller for easy jobsite placement. These condensing units utilize the Floating Tube™
coil design, which eliminates tube-sheet leaks, allowing Larkin to offer you a 5-year warranty (including
labor and refrigerant) against tube-sheet leaks. PSC motors come standard to help you save energy.
LD – 3 - 22 HP Indoor or Outdoor Condensing Units with Discus® Compressors
LD
Model
Compressor
LD*0300L6
LD*0400L6
LD*0600L6
LD*0601L6
LD*0750L6
LD*0900L6
LD*1000L6
LD*1200L6
LD*1500L6
LD*2200L6
LD*0300L2
LD*0400L2
LD*0600L2
LD*0601L2
LD*0750L2
LD*0900L2
LD*1000L2
LD*1200L2
LD*1500L2
LD*2200L2
LD*0500M6
LD*0501M6
LD*0750M6
LD*0751M6
LD*0800M6
LD*1000M6
LD*1200M6
LD*1500M6
LD*0500H2
LD*0501H2
LD*0750H2
LD*0751H2
LD*0800H2
LD*1000H2
LD*1200H2
LD*1500H2
2DF3F16KE
2DL3F20KE
2DB3F25KE
3DA3F28KE
3DB3F33KE
3DF3F40KE
3DS3F46KE
4DA3F47KE
4DL3F63KE
4DT3F76KE
2DF3F16KE
2DL3F20KE
2DB3F25KE
3DA3F28KE
3DB3F33KE
3DF3F40KE
3DS3F46KE
4DA3F47KE
4DL3F63KE
4DT3F76KE
2DC3R53KE
2DD3R63KE
2DL3R78KE
2DA3R89KE
3DA3R10ME
3DB3R12ME
3DF3R15ME
3DS3R17ME
2DC3R53KE
2DD3R63KE
2DL3R78KE
2DA3R89KE
3DA3R10ME
3DB3R12ME
3DF3R15ME
3DS3R17ME
Refrigerant
Suction
Temp.
Low
Temp.
R-404A
/507
-10ºF
Low
Temp.
R-22
-10ºF
Medium
Temp.
R-404A
/507
20ºF
Medium
& High
Temp.
R-22
25ºF
BTUH
95˚F
Amb.
25,320
29,620
35,160
38,920
45,630
59,280
64,870
70,880
89,380
103,010
22,160
25,870
31,180
34,760
42,060
53,290
57,230
63,600
79,760
92,430
39,690
46,000
56,360
67,930
80,710
94,670
111,440
128,750
43,380
49,380
61,860
71,930
88,450
103,250
115,210
134,780
Air Defrost
Min. Circuit Amp
208-230/ 460/
60/3
60/3
20.6
10.8
32.2
13.4
34.4
16.8
32.7
15.4
37.2
19.5
46.9
22.6
51.9
24.6
59.9
30.0
67.8
33.9
80.9
40.5
20.6
10.8
32.2
13.4
34.4
16.8
32.7
15.4
37.2
19.5
46.9
22.6
51.9
24.6
59.9
30.0
67.8
33.9
80.9
40.5
27.7
13.6
27.7
13.7
38.1
17.4
41.3
19.6
51.4
26.2
54.3
26.2
59.4
30.2
75.7
36.9
27.7
13.6
27.7
13.7
38.1
17.4
41.3
19.6
51.4
26.2
54.3
26.2
59.4
30.2
75.7
36.9
Connections (in.)
Air Defrost
Min. Circuit Amp
208-230/ 460/
60/3
60/3
36.4
19.5
51.6
25.5
64.7
33.4
67.1
31.0
36.4
19.5
51.6
25.5
64.7
33.4
67.1
31.0
34.8
18.7
39.9
22.2
39.1
23.4
51.9
23.4
64.7
31.8
72.7
35.5
Connections (in.)
Dimensions
(in.)
Liquid
Suction
L
H
D
Approx.
Net Wt.
(lbs.)
1/2
1/2
1/2
1/2
1/2
5/8
5/8
7/8
7/8
7/8
1/2
1/2
1/2
1/2
1/2
5/8
5/8
7/8
7/8
7/8
1/2
1/2
1/2
5/8
5/8
5/8
5/8
7/8
1/2
1/2
1/2
5/8
5/8
5/8
5/8
7/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-3/8
1-3/8
1-5/8
1-5/8
1-5/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-3/8
1-3/8
1-5/8
1-5/8
1-5/8
1-1/8
1-1/8
1-1/8
1-3/8
1-3/8
1-3/8
1-3/8
1-5/8
1-1/8
1-1/8
1-1/8
1-3/8
1-3/8
1-3/8
1-3/8
1-5/8
36-3/4
36-3/4
36-3/4
36-3/4
36-3/4
36-3/4
36-3/4
41-3/4
41-3/4
41-3/4
36-3/4
36-3/4
36-3/4
36-3/4
36-3/4
36-3/4
36-3/4
41-3/4
41-3/4
41-3/4
36-3/4
36-3/4
36-3/4
36-3/4
36-3/4
36-3/4
36-3/4
41-3/4
36-3/4
36-3/4
36-3/4
36-3/4
36-3/4
36-3/4
36-3/4
41-3/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
48-3/4
48-3/4
48-3/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
48-3/4
48-3/4
48-3/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
48-3/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
48-3/4
51-3/4
51-3/4
51-3/4
51-3/4
51-3/4
63-3/4
63-3/4
75-1/8
75-1/8
75-1/8
51-3/4
51-3/4
51-3/4
51-3/4
51-3/4
63-3/4
63-3/4
75-1/8
75-1/8
75-1/8
51-3/4
51-3/4
51-3/4
63-3/4
63-3/4
63-3/4
63-3/4
75-1/8
51-3/4
51-3/4
51-3/4
63-3/4
63-3/4
63-3/4
63-3/4
75-1/8
737
741
751
781
805
1,030
1,035
1,199
1,234
1,224
737
741
751
781
805
1,030
1,035
1,199
1,234
1,224
751
751
761
985
1,020
1,045
1,065
1,182
751
751
761
985
1,020
1,045
1,065
1,182
LZ Scroll® Model
LZ
Model
Compressor
Refrigerant
Suction
Temp.
LZ*0750L6
LZ*1000L6
LZ*1300L6
LZ*1500L6
LZ*0750L2
LZ*1000L2
LZ*1300L2
LZ*1500L2
LZ*0650M6
LZ*0700M6
LZ*0750M6
LZ*0860M6
LZ*1000M6
LZ*1400M6
ZF24K4E
ZF33K4E
ZF40K4E
ZF48K4E
ZF24K4E
ZF33K4E
ZF40K4E
ZF48K4E
ZB50KCE
ZB58KCE
ZB66KCE
ZB76KCE
ZS92K4E
ZS11M4E
Low
Temp.
R-404A
/507
-10ºF
Low
Temp.
R-22
-10ºF
High
Temp.
R-404A
25ºF
24
BTUH
95˚F
Amb.
32,650
45,630
57,900
65,370
30,610
42,940
53,530
60,860
56,230
67,790
77,660
89,080
105,030
115,470
Dimensions
(in.)
Liquid
Suction
L
H
D
Approx.
Net Wt.
(lbs.)
1/2
1/2
5/8
5/8
1/2
1/2
5/8
5/8
1/2
5/8
5/8
5/8
5/8
7/8
1-1/8
1-1/8
1-3/8
1-3/8
1-1/8
1-1/8
1-3/8
1-3/8
1-1/8
1-3/8
1-3/8
1-3/8
1-3/8
1-5/8
36-3/4
36-3/4
36-3/4
36-3/4
36-3/4
36-3/4
36-3/4
36-3/4
36-3/4
36-3/4
36-3/4
36-3/4
36-3/4
36-3/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
51-3/4
51-3/4
63-3/4
63-3/4
51-3/4
51-3/4
63-3/4
63-3/4
51-3/4
63-3/4
63-3/4
63-3/4
63-3/4
63-3/4
671
671
910
891
671
671
910
891
574
800
813
818
908
915
Condensing Units
12 - 40 HP Outdoor Condensing Units
Model LDV outdoor condensing unit offers models from 12 - 40 horsepower. The LDV
features a new leak resistant design which includes the Floating Tube™ coil design . Other
features include high efficiency Copeland Discus® compressors with POE oil and convenient
access panels for easy servicing of 5 internal components. LDV models are available with
oversized condensers. PSC motors come standard to help you save energy.
LDV - 12 - 40 HP Outdoor Condensing Unit
LDV
Model
Compressor
LDV1500H2
LDV2000H2
LDV2500H2
LDV2600H2
LDV3000H2
LDV3500H2
LDV3505H2
LDV4000H2
LDV1500M6
LDV2000M6
LDV2500M6
LDV2600M6
LDV3000M6
LDV3500M6
LDV4000M6
LDV1501H6
LDV2001H6
LDV2501H6
LDV3001H6
LDV3501H6
LDV4001H6
LDV1500C6
LDV2000C6
LDV2500C6
LDV2600C6
LDV3000C6
LDV3500C6
LDV4000C6
LDV1501C6
LDV2001C6
LDV2501C6
LDV3001C6
LDV3501C6
LDV4001C6
LDV1200L6
LDV1500L6
LDV2200L6
LDV2700L6
LDV3000L6
LDV1201L6
LDV1501L6
LDV2201L6
LDV2701L6
LDV3001L6
3DS3R17ME
4DA3R18ME
4DH3R22ME
4DH3R22ME
4DJ3R28ME
6DH3R35ME
6DG3R37ME
6DJ3R40ME
3DS3R17ME
4DA3R18ME
4DH3R22ME
4DH3R22ME
4DJ3R28ME
6DH3R35ME
6DJ3R40ME
3DS3R17ME
4DA3R18ME
4DH3R22ME
4DJ3R28ME
6DH3R35ME
6DJ3R40ME
3DS3R17ME
4DA318ME
4DH322ME
4DH3R22ME
4DJ3R28ME
6DH3R35ME
6DJ3R40ME
3DS3R17ME
4DA3R18ME
4DH3R22ME
4DJ3R28ME
6DH3R35ME
6DJ3R40ME
4DA3R12ME
4DL3F63KE
4DT3F76KE
6DL3F93KE
6DT3F11ME
4DA3R12ME
4DL3F63KE
4DT3F76KE
6DL3F93KE
6DT3F11ME
Refrig.
Suction
Temp.
Medium
Temp.
R-22
25ºF
Medium
Temp.
R-404A
/507
25ºF
High
Temp.
R-404A
/507
High Eff.
25ºF
Comm.
Temp.
R-404A
/507
10ºF
Comm.
Temp.
R-404A
/507
High Eff.
10ºF
Low
Temp.
R-404A
/507
-10ºF
Low
Temp.
R-404A
/507
High Eff.
-10ºF
BTUH
95˚F
Amb.
133,500
139,900
182,900
186,800
219,900
281,600
295,000
326,300
141,400
147,800
185,400
190,800
229,900
292,600
338,600
149,600
159,600
201,000
243,000
307,900
353,000
109,200
111,700
141,000
146,500
175,500
223,900
261,100
114,000
119,200
151,100
183,500
233,800
270,000
69,500
88,100
104,300
130,900
147,200
71,800
91,100
108,200
137,800
152,400
Air Defrost
Min. Circuit Amp
230/60/3 460/60/3
74.9
36.5
82.7
41.3
100.1
50.1
106.1
53.1
119.4
59.7
141.2
70.6
161.2
80.6
179.7
89.8
74.9
36.5
82.7
41.3
100.1
50.1
106.1
53.1
119.4
59.7
141.2
70.6
179.7
89.8
80.9
39.5
88.7
44.3
113.1
56.6
126.4
63.2
148.2
74.1
186.7
93.3
74.9
36.5
82.7
41.3
100.1
50.1
106.1
53.1
119.4
59.7
141.2
70.6
179.7
89.8
80.9
39.5
88.7
44.3
113.1
56.6
126.4
63.2
148.2
74.1
186.7
93.3
59.1
29.6
67.0
33.5
80.1
40.1
98.5
49.3
121.2
60.2
59.1
29.6
67.0
33.5
80.1
40.1
104.5
49.3
121.2
60.6
Connections
(in.)
Liquid
7/8
7/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
7/8
7/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
7/8
7/8
1-1/8
1-1/8
1-1/8
1-1/8
7/8
7/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
7/8
7/8
1-1/8
1-1/8
1-1/8
1-1/8
7/8
7/8
7/8
1-1/8
1-1/8
7/8
7/8
7/8
1-1/8
1-1/8
Suction
1-5/8
1-5/8
2-1/8
2-1/8
2-1/8
2-1/8
2-1/8
2-1/8
1-5/8
1-5/8
2-1/8
2-1/8
2-1/8
2-1/8
2-1/8
1-5/8
1-5/8
2-1/8
2-1/8
2-1/8
2-1/8
1-5/8
1-5/8
2-1/8
2-1/8
2-1/8
2-1/8
2-1/8
1-5/8
1-5/8
2-1/8
2-1/8
2-1/8
2-1/8
1-5/8
1-5/8
2-1/8
2-1/8
2-1/8
1-5/8
1-5/8
2-1/8
2-1/8
2-1/8
Dimensions
(in.)
L
154
154
154
182
182
236
236
236
154
154
154
182
182
236
236
182
182
236
236
281
281
154
154
154
182
182
236
236
182
182
236
236
281
281
154
154
154
154
182
154
154
154
182
182
H
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
D
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
Approx.
Net Wt.
(lbs.)
1,580
1,580
1,630
1,770
1,860
2,260
2,260
2,360
1,580
1,580
1,630
1,770
1,860
2,260
2,360
1,680
1,760
1,750
2,160
2,770
2,870
1,580
1,580
1,630
1,770
1,860
2,260
2,360
1,680
1,760
1,750
2,160
2,770
2,870
1,500
1,500
1,500
1,670
1,870
1,600
1,750
1,780
1,970
2,070
25
Condensing Units
24 - 80 HP Dual Compressor Outdoor Condensing Units
Model LDD condensing units is a dual compressor vertical discharge
outdoor condensing unit size ranges from 24 - 80 horsepower utilizes
Copeland Discus® compressors. A wide range of options are available, ideal
for large cold storage or warehouse applications. PSC motors come standard
to help you save energy.
LDD - 24 - 80 HP Dual Compressor Outdoor Condensing Units
LDD
Model
Compressor
LDD3000H2
LDD4000H2
LDD5000H2
LDD5200H2
LDD6000H2
LDD7000H2
LDD7010H2
LDD8000H2
LDD3000M6
LDD4000M6
LDD5000M6
LDD5200M6
LDD6000M6
LDD7000M6
LDD8000M6
LDD3000C6
LDD4000C6
LDD5000C6
LDD6000C6
LDD7000C6
LDD8000C6
LDD2400L6
LDD3000L6
LDD4400L6
LDD5400L6
LDD6000L6
LDD2400L6
LDD3000L6
LDD4400L6
LDD5400L6
LDD6000L6
3DS3R17ME
4DA3R18ME
4DH3R22ME
4DH3R22ME
4DJ3R28ME
6DH3R35ME
6DG3R37ME
6DJ3R40ME
3DS3R17ME
4DA3R18ME
4DH3R22ME
4DH3R22ME
4DJ3R28ME
6DH3R35ME
6DJ3R40ME
3DS3R17ME
4DA3R18ME
4DH3R22ME
4DJ3R28ME
6DH3R35ME
6DJ3R40ME
4DA3F47KE
4DL3F63KE
4DT3F76KE
6DL3F93KE
6DT3F11ME
4DA3F47KE
4DL3F63KE
4DT3F76KE
6DL3F93KE
6DT3F11ME
Refrig.
Suction
Temp.
High
Temp.
R-22
25°F
Medium
Temp.
R404A
/507
25°F
Comm.
Temp.
R404A
/507
10°F
Low
Temp.
R404A
/507
-10°F
Low
Temp.
R-22
-10°F
* MCA based on remote loads and one contactor
26
BTUH
95°F
Amb.
267,000
279,800
365,800
373,600
439,800
563,200
590,800
652,600
282,800
295,600
370,800
381,600
459,800
585,200
677,200
218,400
223,400
282,000
351,000
447,800
522,200
139,000
176,200
208,600
261,800
294,400
125,000
158,400
187,800
232,200
277,000
Air Defrost
Min. Circuit Amp*
230/60/3 460/60/3
136.4
66.6
150.4
75.2
181.9
90.9
193.9
96.9
217.8
108.9
258.3
129.2
294.4
147.2
327.6
163.8
136.4
66.6
150.4
75.2
181.9
90.9
193.9
96.9
217.8
108.9
258.3
129.2
327.6
163.8
136.4
66.6
150.4
75.2
181.9
90.9
217.8
108.9
258.3
129.2
327.6
163.8
108.0
54.0
122.2
61.1
145.8
72.9
179.0
89.5
221.0
110.5
108.0
54.0
122.2
61.1
145.8
72.9
179.0
89.5
221.0
110.5
Connections
(in.)
Liquid Suction
7/8
1-5/8
7/8
1-5/8
1-1/8
2-1/8
1-1/8
2-1/8
1-1/8
2-1/8
1-1/8
2-1/8
1-1/8
2-1/8
1-1/8
2-1/8
7/8
1-5/8
7/8
1-5/8
1-1/8
2-1/8
1-1/8
2-1/8
1-1/8
2-1/8
1-1/8
2-1/8
1-1/8
2-1/8
7/8
1-5/8
7/8
1-5/8
1-1/8
2-1/8
1-1/8
2-1/8
1-1/8
2-1/8
1-1/8
2-1/8
7/8
1-5/8
7/8
1-5/8
7/8
2-1/8
1-1/8
2-1/8
1-1/8
2-1/8
7/8
1-5/8
7/8
1-5/8
7/8
2-1/8
1-1/8
2-1/8
1-1/8
2-1/8
Dimensions
(in.)
L
H
D
151
61
88
151
61
88
151
61
88
179
61
88
179
61
88
233
61
88
233
61
88
233
61
88
151
61
88
151
61
88
151
61
88
179
61
88
179
61
88
233
61
88
233
61
88
151
61
88
151
61
88
151
61
88
179
61
88
233
61
88
233
61
88
151
61
88
151
61
88
151
61
88
151
61
88
179
61
88
151
61
88
151
61
88
151
61
88
151
61
88
179
61
88
Approx.
Net Wt.
(lbs.)
3,160
3,160
3,230
3,520
3,720
4,320
4,320
4,760
3,160
3,160
3,230
3,520
3,720
4,320
4,760
3,160
3,160
3,230
3,720
4,320
4,760
3,000
3,000
3,000
3,340
3,770
3,000
3,000
3,000
3,340
3,770
Condensing Units
1/2 - 6 HP Remote Water-Cooled Condensing Units
with Hermetic or Scroll® Compressors
Models HWN/ZWN are water-cooled hermetic and Scroll® condensing units from 1/2 - 6 HP.
Condensing units’ component selection, location, base and unit dimensions are all optimized for
easy field replacements or in new installations where space is limited. Extra space is provided inside
the electrical box for easy servicing. The area is large enough to accommodate circuit breakers,
compressor contactors, time clocks and all start components in one enclosure. Standard features
include compressor isolation valves that enable services technicians to isolate the compressor for
service. Also standard is the extra capacity receiver which provides total refrigerant pump down.
Ideal for units requiring long line runs. These units are available with Copeland hermetic, Scroll®
low and medium temperature compressors as well as hermetic low temperature compressors for
R-22 and R-404A. These units are UL listed for US and Canada.
HWN – 1/2 - 6 HP Remote Water-Cooled Condensing Units with Hermetic Compressors
HWN
Model
Compressor
HWN005H2
HWN008H2
HWN010H2
HWN015H2
HWN020H2
HWN030H2
HWN040H2
HWN050H2
HWN005X6
HWN008X6
HWN009X6
HWN010X6
HWN015X6
HWN020X6
HWN025X6
HWN030X6
HWN032X6
HWN040X6
HWN050X6
HWN011L6
HWN014L6
HWN025L6
HWN031L6
ART82C1
RS64C2
RS70C1
CR18KQ
CR24KQ
CR37KQ
CR53KQ
CRN50500
RS43C2E
RS55C2E
RS64C2E
RS70C2E
CS10K6E
CS12K6E
CS14K6E
CS18K6E
CS20K6E
CS27K6E
CS33K3E
CF04K6E
CF06K6E
CF09K6E
CF12K6E
Suction
Refrigerant
Temp.
Medium
& High
Temp.
R-22
20°F
Extended
Temp.
R-404A
/507
10°F
Low
Temp.
R-404A
/507
-10°F
BTUH
95˚F
Amb.
5,390
7,500
8,810
11,240
14,330
23,660
33,740
40,460
4,060
5,280
6,395
6,800
9,710
11,490
13,630
17,400
19,220
23,901
28,838
5,310
8,700
12,590
16,060
Air Defrost
Total MCA
208-230/ 208-230/
60/1
60/3
15
15
15
15
15
15
20
15
21
15
33
20
39
24
15
15
15
15
15
15
15
15
15
15
15
18
15
21
15
27
20
35
21
15
15
15
15
20
15
21
15
Connections
ODS (in.)
460/
60/3
15
15
15
15
15
15
15
15
15
15
15
Dimensions
(in.)
Liquid
Suction
L
H
D
Approx.
Net Wt.
(lbs.)
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
3/8
3/8
3/8
1/2
1/2
1/2
5/8
5/8
5/8
7/8
7/8
7/8
1/2
1/2
5/8
5/8
5/8
7/8
7/8
7/8
7/8
7/8
7/8
5/8
5/8
5/8
7/8
22
22
22
27
27
29
29
29
22
22
22
22
27
27
27
27
27
29
29
27
27
27
27
17
17
17
21
21
28
28
28
17
17
17
17
21
21
21
28
28
28
28
21
21
21
21
14
14
14
22
22
25
25
25
14
14
14
14
22
22
22
22
22
25
25
22
22
22
22
77
92
92
136
141
174
196
221
98
98
103
107
148
148
152
172
182
183
207
114
114
120
136
ZWN – 1/2 - 6 HP Remote Water-Cooled Condensing Units with Scroll® Compressors
ZWN
Model
Compressor
ZWN030X6
ZWN035X6
ZWN045X6
ZWN055X6
ZWN060X6
ZWN030L6
ZWN035L6
ZWN045L6
ZWN055L6
ZWN060L6
ZS21K4E
ZS26K4E
ZS30K4E
ZS38K4E
ZS45K4E
ZF09K4E
ZF11K4E
ZF13K4E
ZF15K4E
ZF18K4E
Suction
Refrigerant
Temp.
Extended
Temp.
R-404A
/507
10°F
Low
Temp.
R-404A
/507
-10°F
BTUH
95˚F
Amb.
19,740
24,490
28,480
34,970
41,850
13,200
16,200
19,100
23,300
27,700
Air Defrost
Total MCA
208-230/ 208-230/
60/1
60/3
18.4
15
23.2
15.2
30
17
36
24
27
18
15
23
15
30
17
36
24
27
Connections
ODS (in.)
460/
60/3
15
15
15
15
15
15
15
15
15
15
Dimensions
(in.)
Liquid
Suction
L
H
D
Approx.
Net Wt.
(lbs.)
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
29
29
29
29
29
27
27
27
27
29
28
28
28
28
28
28
28
28
28
28
25
25
25
25
25
22
22
22
22
25
171
186
207
226
241
159
165
185
201
207
27
Condensing Units
3/4 - 22 HP Indoor Water-Cooled Condensing Units
Model SWN are “vessel-mounted” indoor water-cooled condensing units, complete with a
shell and tube. The cleanable water-cooled condenser for those applications where air-cooled
condensers would not be practical or water is readily available. Available in sizes 3/4 - 22 HP
in all temperature ranges, the SWN units are an economical, compact selection.
Model SWN
SWN
Model
SWN0150L6
SWN0200L6
SWN0210L6
SWN0310E6
SWN0310L6
SWN0311L6
SWN0400L6
SWN0599L6
SWN0600L6
SWN0601L6
SWN0750L6
SWN0900L6
SWN1000L6
SWN1500L6
SWN2200L6
SWN0090M6
SWN0199M6
SWN0200M6
SWN0310M6
SWN0500M6
SWN0075H2
SWN0075M2
SWN0090H2
SWN0100H2
SWN0150H2
SWN0200H2
SWN0200M2
SWN0300H2
SWN0400H2
SWN0499H2
SWN0500H2
SWN0750H2
SWN0760H2
SWN0761H2
SWN1000H2
SWN1500H2
SWN2000H2
28
Compressor
Refrig.
KALA016E
EADA020E
EAVA021E
LACA032E
LAHA032E
2DF3F16KE
2DL3F20KE
Low
2DA3F23KE Temp.
2DB3F25KE R-404A
3DA3F28KE
3DB3F33KE
3DF3F40KE
3DS3F46KE
4DL3F63KE
4DT3F76KE
KARA010E
KAKA020E Medium
ERCA021E
Temp.
R-404A
ERFA031E
2DC3R53KE
KAN10075
KAE10075
KARA010E
KAM10100
KAGA0150
ERA10200
ERC10200
Medium
ERF10311
& High
NRB20400
Temp.
2DC3R53KE
R-22
2DD3R63KE
2DL3R78KE
2DA3R89KE
3DA3R10ME
3DB3R12ME
3DS3R17ME
4DA3R18ME
Suction
Temp.
-10ºF
20ºF
25ºF
Air Defrost
BTUH
Total MCA
105˚F
208-230/
208-230/
Cond.
230/1
60/1
60/3
9,030
15.0
15.0
10,500
15.0
15.0
12,290
20.0
15.0
20.0
15.0
19,850
20.0
15.0
26,570
28.7
20.0
31,920
29.5
36,440
32.3
39,170
31.7
43,680
30.0
51,560
34.5
63,210
41.5
70,880
46.5
95,660
59.0
115,710
74.0
9,140
15.0
15.0
15,120
15.0
15.0
19,430
15.0
28,090
20.0
15.0
43,470
25.0
6,700
15.0
15.0
8,000
15.0
15.0
9,370
15.0
15.0
10,690
15.0
15.0
12,150
15.0
15.0
16,090
15.0
15.0
19,480
15.0
15.0
28,290
20.0
15.0
40,130
24.4
46,230
25.0
53,810
25.0
67,750
35.4
76,770
35.9
92,810
46.0
110,190
48.9
146,060
66.9
156,830
65.9
Connections
(in.)
Dimensions
(in.)
460/
Liquid Suction
L
H
D
60/3
15.0 3/8
7/8
23-3/4 37-1/3
33
3/8
7/8
23-3/4 37-1/3
33
15.0 3/8
7/8
23-3/4 37-1/3
33
15.0 1/2
1-1/8 26-3/4 36-1/3 38-1/3
15.0 1/2
1-1/8 26-3/4 36-1/3 38-1/3
15.0 1/2
1-3/8 26-3/4 36-1/3 38-1/3
15.0 1/2
1-3/8 26-3/4 36-1/3 38-1/3
15.0 5/8
1-3/8 30-1/3 39-1/4 42-1/2
15.0 5/8
1-3/8 30-1/3 39-1/4 42-1/2
15.0 5/8
1-3/8 30-1/3 39-1/4 42-1/2
20.0 5/8
1-5/8 35-1/3 41-1/2 55-1/2
20.0 5/8
1-5/8 35-1/3 41-1/2 55-1/2
20.8 7/8
1-5/8 35-1/3 41-1/2 55-1/2
29.5 7/8
2-1/8 35-1/3 41-1/2 55-1/2
37.0 7/8
2-1/8 35-1/3 41-1/2 55-1/2
3/8
7/8
23-3/4 37-1/3
33
3/8
7/8
23-3/4 37-1/3
33
3/8
7/8
23-3/4 37-1/3
33
15.0 1/2
1-1/8 26-3/4 36-1/3 38-1/3
15.0 5/8
1-3/8 30-1/3 39-1/4 42-1/2
3/8
5/8
3-3/4 37-1/3
33
3/8
5/8
3-3/4 37-1/3
33
3/8
5/8
3-3/4 37-1/3
33
15.0 3/8
7/8
3-3/4 37-1/3
33
15.0 3/8
7/8
3-3/4 37-1/3
33
15.0 3/8
7/8
3-3/4 37-1/3
33
15.0 3/8
7/8
3-3/4 37-1/3
33
15.0 1/2
1-1/8 26-3/4 36-1/3 38-1/3
15.0 1/2
1-1/8 26-3/4 36-1/3 38-1/3
15.0 5/8
1-3/8 30-1/3 39-1/4 42-1/2
15.0 5/8
1-3/8 30-1/3 39-1/4 42-1/2
20.0 5/8
1-3/8 35-1/3 41-1/2 55-1/2
20.0 5/8
1-3/8 35-1/3 41-1/2 55-1/2
22.4 5/8
1-3/8 35-1/3 41-1/2 55-1/2
22.4 7/8
1-5/8 35-1/3 41-1/2 55-1/2
29.5 7/8
1-5/8 35-1/3 41-1/2 55-1/2
32.9 7/8
1-5/8 35-1/3 41-1/2 55-1/2
Approx.
Net Wt.
(lbs.)
195
325
325
325
325
340
385
415
415
430
465
560
715
780
865
180
210
260
325
400
165
165
180
180
195
260
260
325
385
400
400
465
465
465
715
735
795
Condensing Units
3/4 - 22 HP Indooor Remote Compressor Condensing Units
Model SRN are indoor compressor units designed for use with a remote air cooled or evaporative
condenser. Typical applications include supermarkets, warehouses, convenience stores or wherever
outdoor roof or pad space is at a minimum. SRN units are available in sizes 3/4 - 22 HP in high,
medium and low temperature.
Model SRN
SRN
Model
SRN0150L6
SRN0200L6
SRN0210L6
SRN0310E6
SRN0310L6
SRN0311L6
SRN0400L6
SRN0599L6
SRN0600L6
SRN0601L6
SRN0750L6
SRN0900L6
SRN1000L6
SRN1500L6
SRN2200L6
SRN0090M6
SRN0199M6
SRN0200M6
SRN0310M6
SRN0500M6
SRN0075H2
SRN0075M2
SRN0090H2
SRN0100H2
SRN0150H2
SRN0200H2
SRN0200M2
SRN0300H2
SRN0400H2
SRN0499H2
SRN0500H2
SRN0750H2
SRN0760H2
SRN0761H2
SRN1000H2
SRN1500H2
SRN2000H2
Compressor
Refrig.
KALA016E
EADA020E
EAVA021E
LACA032E
LAHA032E
2DF3F16KE
2DL3F20KE
Low
2DA3F23KE Temp.
2DB3F25KE R-404A
3DA3F28KE
3DB3F33KE
3DF3F40KE
3DS3F46KE
4DL3F63KE
4DT3F76KE
KARA010E
KAKA020E Medium
ERCA021E
Temp.
R-404A
ERFA031E
2DC3R53KE
KAN10075
KAE10075
KARA010E
KAM10100
KAGA0150
ERA10200
ERC10200
Medium
ERF10311
& High
NRB20400
Temp.
2DC3R53KE
R-22
2DD3R63KE
2DL3R78KE
2DA3R89KE
3DA3R10ME
3DB3R12ME
3DS3R17ME
4DA3R18ME
Suction
Temp.
-10ºF
20ºF
25ºF
Air Defrost
Total MCA
208-230/
208-230/
230/1
60/1
60/3
8,480
15.0
15.0
9,960
15.0
15.0
11,550
20.0
15.0
20.0
15.0
18,660
20.0
15.0
25,330
28.7
20.0
30,530
29.5
34,870
32.3
37,520
31.7
42,080
30.0
49,710
34.5
60,950
41.5
68,260
46.5
92,330
59.0
110,880
74.0
7,780
15.0
15.0
12,850
15.0
15.0
16,310
15.0
24,080
20.0
15.0
37,370
25.0
5,970
15.0
15.0
7,110
15.0
15.0
8,360
15.0
15.0
9,580
15.0
15.0
10,920
15.0
15.0
13,100
15.0
15.0
17,260
15.0
15.0
25,580
20.0
15.0
35,260
24.4
41,290
25.0
48,320
25.0
61,380
35.4
69,680
35.9
84,740
46.0
101,120
48.9
134,160
66.9
143,520
65.9
BTUH
95˚F
Amb.
Connections
(in.)
Dimensions
(in.)
460/
Liquid Suction
L
H
D
60/3
15.0 3/8
7/8
23-3/4 36-1/3
35
3/8
7/8
23-3/4 36-1/3
35
15.0 3/8
7/8
23-3/4 36-1/3
35
15.0 1/2
1-1/8 26-3/4 39-1/4
40
15.0 1/2
1-1/8 26-3/4 39-1/4
40
15.0 1/2
1-3/8 26-3/4 39-1/4
40
15.0 1/2
1-3/8 26-3/4 39-1/4
40
15.0 5/8
1-3/8 30-1/3 39-1/4 42-1/2
15.0 5/8
1-3/8 30-1/3 39-1/4 42-1/2
15.0 5/8
1-3/8 30-1/3 39-1/4 42-1/2
20.0 5/8
1-5/8 35-1/3 43-1/2
47
20.0 5/8
1-5/8 35-1/3 43-1/2
47
20.8 7/8
1-5/8 35-1/3 43-1/2
47
29.5 7/8
2-1/8 35-1/3 43-1/2
47
37.0 7/8
2-1/8 35-1/3 43-1/2
47
3/8
7/8
23-3/4 36-1/3
35
3/8
7/8
23-3/4 36-1/3
35
3/8
7/8
23-3/4 36-1/3
35
15.0 1/2
1-1/8 26-3/4 39-1/4
40
15.0 5/8
1-3/8 30-1/3 39-1/4 42-1/2
3/8
5/8
23-3/4 36-1/3
35
3/8
5/8
23-3/4 36-1/3
35
3/8
5/8
23-3/4 36-1/3
35
15.0 3/8
7/8
23-3/4 36-1/3
35
15.0 3/8
7/8
23-3/4 36-1/3
35
15.0 3/8
7/8
23-3/4 36-1/3
35
15.0 3/8
7/8
23-3/4 36-1/3
35
15.0 1/2
1-1/8 26-3/4 39-1/4
40
15.0 1/2
1-1/8 26-3/4 39-1/4
40
15.0 5/8
1-3/8 30-1/3 39-1/4 42-1/2
15.0 5/8
1-3/8 30-1/3 39-1/4 42-1/2
20.0 5/8
1-3/8 35-1/3 43-1/2
47
20.0 5/8
1-3/8 35-1/3 43-1/2
47
22.4 5/8
1-3/8 35-1/3 43-1/2
47
22.4 7/8
1-5/8 35-1/3 43-1/2
47
29.5 7/8
1-5/8 35-1/3 43-1/2
47
32.9 7/8
1-5/8 35-1/3 43-1/2
47
Approx.
Net Wt.
(lbs.)
175
305
305
305
305
320
360
390
390
405
385
520
650
710
725
155
200
245
305
375
155
155
160
160
175
245
245
305
360
375
375
385
385
385
595
615
375
29
Condensing Units
3/4 - 30 HP Indoor/Supermarket Condensing Units
Models LRI/LDI feature a new leak resistant design that includes a Floating Tube™
coil design. Electrical controls are located in an easily accessible control box with a
hinged cover and includes room for the defrost controls when required. Receivers are
sized for sufficient pumpdown capacity and vapor-free liquid. The LRI/LDI cabinets are
constructed from pre-painted G90 galvanized steel.
LRI – 3/4 - 30 HP Indoor/Supermarket Condensing Units with Reed Compressors
LRI
Model
Compressor
LRI0075M2
LRI0100M2
LRI0150H2
LRI0200H2
LRI0202M2
LRI0300H2
LRI0400M2
LRI0100M6
LRI0200M6
LRI0202M6
LRI0300M6
LRI0400M6
LRI0075L2
LRI0100L2
LRI0200L2
LRI0202L2
LRI0300L2
LRI0075L6
LRI0100L6
LRI0150L6
LRI0200L6
LRI0202L6
LRI0300L6
LRI0302L6
LRI0400L6
KAE0075
KAM0100
KAG0100
ERA0200
ERC0200
ERF0310
NRB0400
KAR010E
KAK020E
ERC021E
ERF031E
NRB040E
KAM007E
KAJ010E
EAD0200
EAV021E
LAH0310
KAM007E
KAJ010E
KAL016E
EAD021E
EAV021E
LAH032E
LAC032E
NRD040E/032E
30
Refrig.
Suction
Temp.
Medium
& High
Temp.
R-22
25ºF
Medium
Temp.
R-404A
/507
25°F
Low
Temp.
R-22
-10°F
Low
Temp.
R-404A
/507
-10°F
Air Defrost
Min. Circuit Amp
208-230/ 208-230/ 460/
60/1
60/3
60/3
7,910
9.6
7.3
10,690
11.9
8.5
12,230
14.3
9.6
6.3
16,210
10.9
5.8
17,640
10.5
5.7
26,200
16.6
9.2
35,850
28.0
14.5
9,750
11.5
8.3
16,240
14.9
10.8
20,060
13.4
29,370
17.4
8.4
36,320
28.0
4,560
9.9
7.1
5,630
11.3
8.5
9,580
11.1
11,010
20.0
11.8
6.3
17,150
17.9
8.7
4,320
9.9
7.1
5,790
11.3
8.5
8,920
14.6
11.0
5.8
9,870
11.1
11,280
20.0
11.8
6.3
17,800
17.9
8.7
not rated
13.8
8.6
22,760
21.8
11.4
BTUH
95˚F
Amb.
Connections
(in.)
230/
60/1
15.1
15.3
24.0
14.8
22.1
14.8
22.1
20.7
34.6
Liquid Suction
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
7/8
7/8
7/8
1-1/8
1-1/8
5/8
7/8
7/8
7/8
1-1/8
5/8
5/8
7/8
7/8
7/8
5/8
5/8
7/8
7/8
7/8
7/8
7/8
1-1/8
Dimensions
(in.)
L
H
D
Approx.
Net Wt.
(lbs.)
38-1/4
38-1/4
38-1/4
38-1/4
38-1/4
42-1/4
42-1/4
38-1/4
38-1/4
38-1/4
42-1/4
42-1/4
38-1/4
38-1/4
38-1/4
38-1/4
42-1/4
38-1/4
38-1/4
38-1/4
38-1/4
38-1/4
42-1/4
42-1/4
42-1/4
29
29
29
29
29
39-1/4
39-1/4
29
29
29
39-1/4
39-1/4
29
29
29
29
39-1/4
29
29
29
29
29
39-1/4
39-1/4
39-1/4
33-7/8
33-7/8
33-7/8
33-7/8
33-7/8
43-3/8
43-3/8
33-7/8
33-7/8
33-7/8
43-3/8
43-3/8
33-7/8
33-7/8
33-7/8
33-7/8
43-3/8
33-7/8
33-7/8
33-7/8
33-7/8
33-7/8
43-3/8
43-3/8
43-3/8
292
292
307
307
307
447
477
292
307
307
447
477
292
292
307
307
447
292
292
307
307
307
447
447
477
Condensing Units
LDI – 3/4 - 30 HP Indoor/Supermarket Condensing Units with Discus® Compressors
LDI
Model
Compressor
LDI0500H2
LDI0502H2
LDI0750H2
LDI0752H2
LDI0800H2
LDI1000H2
LDI1500H2
LDI2000H2
LDI2500H2
LDI0500M6
LDI0502M6
LDI0750M6
LDI0752M6
LDI0800M6
LDI1000M6
LDI1500M6
LDI2000M6
LDI2500M6
LDI0300H4
LDI0600H4
LDI0601H4
LDI0750H4
LDI0900H4
LDI1000H4
LDI0304L2
LDI0402L2
LDI0600L2
LDI0602L2
LDI0750L2
LDI0900L2
LDI1000L2
LDI0304L6
LDI0402L6
LDI0600L6
LDI0602L6
LDI0750L6
LDI0900L6
LDI1000L6
LDI1500L6†
LDI2200L6†
LDI2700L6†
LDI3000L6†
2DC3R53KE
2DD3R63K3
2DL3R78KE
2DA3R89KE
3DA3R10ME
3DB3R12ME
3DS3R17ME
4DA3R18ME
4DH3R22ME
2DC3R53KE
2DD3R63KE
2DL3R78KE
2DA3R89KE
3DA3R10ME
3DB3R12ME
3DS3R17ME
4DA3R18ME
4DH3R22ME
2DF3F16KE
2DB3F25KE
3DA3F28KE
3DB3F33KE
3DF3F40KE
3DS3F46KE
2DF3F16KE
2DL3F20KE
2DB3F25KE
3DA3F28KE
3DB3F33KE
3DF3F40KE
3DS3F46KE
2DF3F16KE
2DL3F20KE
2DB3F25KE
3DA3F28KE
3DB3F33KE
3DF3F40KE
3DS3F46KE
4DL3F63KE
4DT3F76KE
6DL3F93KE
6DT3F11ME
Refrig.
Suction
Temp.
High
Temp.
R-22
25°F
Medium
Temp.
R404A/
507
25°F
High
Temp.
R-134A
25°F
Low
Temp.
R-22
-10°F
Low
Temp.
R-404A/
507
-10°F
Low
Temp.
R-404A/
507/22
-10°F
BTUH
95˚F
Amb.
45,130
51,150
65,110
72,330
86,960
102,280
137,400
143,470
190,910
43,500
50,600
64,400
72,300
85,700
101,200
143,170
148,750
191,910
35,450
43,770
51,530
60,620
72,300
80,440
22,600
26,780
32,090
37,690
44,570
54,540
58,330
25,600
30,000
35,700
41,800
48,200
59,400
64,800
91,780
108,690
134,870
146,440
Air Defrost
Min. Circuit Amp
208-230/ 460/ 575/
60/3
60/3 60/3
28.5
13.6
28.5
13.7
42.4
19.3
42.9
19.6
53.0
26.2
55.9
26.2
80.1
39.1
87.9
43.9
105.3
52.7
28.5
13.6
9.9
28.5
13.7
10.1
42.4
19.3
17.2
42.9
19.6
17.3
53.0
26.2
20.8
55.9
26.2
20.9
80.1
39.1
87.9
43.9
105.3
52.7
22.4
35.2
41.0
42.3
50.8
54.1
22.4
13.4
33.0
13.4
35.2
16.8
37.0
17.3
42.3
21.8
50.8
22.7
54.1
24.6
22.4
13.4
33.0
13.4
35.2
16.8
37.0
17.3
42.3
21.8
50.8
22.7
54.1
24.6
72.2
36.1
85.3
51.9
103.7
51.9
120.4
60.2
-
Connections
(in.)
Liquid Suction
1/2
1/2
5/8
5/8
5/8
5/8
7/8
7/8
1-1/8
1/2
1/2
5/8
5/8
5/8
5/8
7/8
7/8
1-1/8
1/2
1/2
5/8
5/8
5/8
5/8
1/2
1/2
1/2
5/8
5/8
5/8
5/8
1/2
1/2
1/2
5/8
5/8
5/8
5/8
7/8
7/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-3/8
1-3/8
1-5/8
1-5/8
2-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-3/8
1-3/8
1-5/8
1-5/8
2-1/8
1-1/8
1-1/8
1-3/8
1-3/8
1-3/8
1-3/8
1-1/8
1-1/8
1-1/8
1-3/8
1-3/8
1-3/8
1-3/8
1-1/8
1-1/8
1-1/8
1-3/8
1-3/8
1-3/8
1-3/8
1-5/8
2-1/8
2-1/8
2-1/8
Dimensions
(in.)
L
H
D
Approx.
Net Wt.
(lbs.)
42-1/4
42-1/4
61-1/4
61-1/4
61-1/4
61-1/4
102-1/2
102-1/2
102-1/2
42-1/4
42-1/4
61-1/4
61-1/4
61-1/4
61-1/4
102-1/2
102-1/2
102-1/2
42-1/4
42-1/4
42-1/4
61-1/4
61-1/4
61-1/4
42-1/4
42-1/4
42-1/4
42-1/4
61-1/4
61-1/4
61-1/4
42-1/4
42-1/4
42-1/4
42-1/4
61-1/4
61-1/4
61-1/4
102-1/2
102-1/2
102-1/2
102-1/2
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
48-3/4
48-3/4
48-3/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
48-3/4
48-3/4
48-3/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
48-3/4
48-3/4
48-3/4
48-3/4
43-3/8
43-3/8
43-3/8
43-3/8
43-3/8
43-3/8
42-1/4
42-1/4
42-1/4
43-3/8
43-3/8
43-3/8
43-3/8
43-3/8
43-3/8
42-1/4
42-1/4
42-1/4
43-3/8
43-3/8
43-3/8
43-3/8
43-3/8
43-3/8
43-3/8
43-3/8
43-3/8
43-3/8
43-3/8
43-3/8
43-3/8
43-3/8
43-3/8
43-3/8
43-3/8
43-3/8
43-3/8
43-3/8
42-1/4
42-1/4
42-1/4
42-1/4
497
497
687
687
712
737
1,056
1,131
1,206
497
497
687
687
712
737
1,056
1,131
1,206
497
497
697
687
712
737
497
497
497
697
687
712
737
497
497
497
697
687
712
737
1,056
1,131
1,206
1,206
† Demand Cooling needs to be specified for use with R-22
31
Air-Cooled Condensers
Models LNE, LNQ, LNX, LNL and LNH Air-Cooled Condensers
Solus™ and Altus™ series air-cooled condensers feature improved energy efficiency and low sound levels, which are key
features sought by the supermarket and grocery industry. Traditional condensers using 1140 RPM motors offer high capacities,
but cannot meet the low sound and energy efficiency standards demanded today by this industry. Now, Larkin brings the
best of both worlds together with advanced solutions that offer high capacities for operation, while meeting the low sound
and energy efficiency requirements you demand.
Model LNE with EC motor technology offers all the benefits of variable speed motors without the complexity. EC motors
utilize variable-speed technology, which optimizes fan speeds for load requirements, maximizes energy efficiency and
minimizes sound.
Models LNQ, LNX and LNL
features Larkin’s patented QuietEdge™ technology that uses specially designed swept
fan blades to reduce noise levels. These blades are uniquely designed for each motor speed, optimizing performance and
ensuring you’re receiving the lowest sound levels possible. Look for the QuietEdge™ 4 blade on the 540 RPM motors and the
QuietEdge™ 5 on the 830 RPM motors.
Model LNH
continues to offer Larkin’s 1140 RPM series for customers seeking the most economical solution for their
capacity requirements.
Solus™ Series Model LNE, 2.2 kW, 31.5“ Fan Diameter
LNE
Model
THR, MBH/1°F TD
Total FLA
CFM
R-22
R-404A
LNES01A008
LNES01A009
LNES02A011
LNES02A015
LNES02A018
LNES03A023
LNES03A027
LNES04A031
LNES04A036
LNES05A039
LNES05A047
LNES06A056
LNES07A065
7.7
9.3
11.3
15.4
18.1
23.1
27.2
30.8
36.3
39.3
46.6
56.0
64.6
7.6
9.1
11.1
15.1
17.8
22.7
26.7
30.2
35.5
38.5
45.7
54.8
63.3
LNED04A023
LNED04A031
LNED04A036
LNED06A046
LNED06A054
LNED08A062
LNED08A073
LNED10A079
LNED10A093
LNED12A112
LNED14A129
22.7
30.8
36.3
46.2
54.4
61.7
72.5
78.6
93.3
111.9
129.2
22.2
30.2
32.5
45.3
53.3
60.5
71.1
77.0
91.4
109.7
126.7
230
460
/3/60
/3/60
Single Row
11,000
7.0
3.5
10,500
7.0
3.5
23,400
14.0
7.0
22,000
14.0
7.0
20,900
14.0
7.0
33,100
21.0
10.5
31,400
21.0
10.5
42,600
28.0
14.0
40,000
28.0
14.0
53,200
35.0
17.5
50,000
35.0
17.5
60,000
42.0
21.0
70,000
49.0
24.5
Double Row
46,700
28.0
14.0
44,100
28.0
14.0
41,800
28.0
14.0
66,100
42.0
21.0
62,700
42.0
21.0
85,100
56.0
28.0
80,000
56.0
28.0
106,400
70.0
35.0
100,100
70.0
35.0
120,100
84.0
42.0
140,100
98.0
49.0
Connections
(in.)
Refrigerant
Summer Charge
R-22 (lbs.)
Approx.
Net Wt.
(lbs.)
1-3/8
1-3/8
1-3/8
1-5/8
2-1/8
2-1/8
2-1/8
2-1/8
2-5/8
2-5/8
2-5/8
2-5/8
(2) 2-5/8
8
10
10
15
29
22
30
51
70
64
86
102
118
330
360
590
640
690
930
1,010
1,220
1,320
1,520
1,650
1,960
2,260
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(4)
19
29
40
44
58
104
140
125
172
201
236
1,290
1,390
1,490
2,060
2,210
2,730
2,930
3,410
3,660
4,370
5,070
1-3/8
1-5/8
2-1/8
2-1/8
2-1/8
2-1/8
2-5/8
2-5/8
2-5/8
2-5/8
2-5/8
Bold indicates standard model capacity at 10 FPI
Solus™ Series
Altus™ Series
32
Air-Cooled Condensers
Altus™ Series Model LNQ, 540 RPM, 0.5 HP, 30“ Fan Diameter
LNQ
Model
THR, MBH/1°F TD
CFM
R-22
R-404A
LNQS01A005
LNQS01A006
LNQS02A008
LNQS02A010
LNQS02A011
LNQS03A016
LNQS03A017
LNQS04A021
LNQS04A023
LNQS05A026
LNQS05A029
LNQS06A034
LNQS07A042
5.2
6.1
8.0
10.3
11.5
15.6
17.2
20.7
22.9
25.9
28.6
34.4
41.6
5.1
5.9
7.8
10.1
11.2
15.2
16.9
20.3
22.4
25.4
28.1
33.7
40.7
LNQD04A016
LNQD04A021
LNQD04A023
LNQD06A031
LNQD06A034
LNQD08A041
LNQD08A046
LNQD10A052
LNQD10A057
LNQD12A069
LNQD14A083
16.0
20.7
22.9
31.0
34.4
41.4
45.8
51.8
57.3
68.7
83.1
15.6
20.3
22.4
30.4
33.7
40.6
44.9
50.7
56.1
67.3
81.5
Connections
(in.)
Refrigerant
Summer
Charge
R-22 (lbs.)
Approx.
Net Wt.
(lbs.)
1.8
1.8
3.5
3.5
3.5
5.3
5.3
7.0
7.0
8.8
8.8
10.5
12.3
1-3/8
1-3/8
1-3/8
1-5/8
2-1/8
2-1/8
2-1/8
2-1/8
2-5/8
2-5/8
2-5/8
2-5/8
(2) 2-5/8
8
10
10
15
29
22
30
51
70
64
86
102
118
330
360
580
630
680
930
1,000
1,210
1,310
1,510
1,640
1,950
2,240
7.0
7.0
7.0
10.5
10.5
14.0
14.0
17.5
17.5
21.0
24.5
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(4)
19
29
40
44
58
104
140
125
172
201
236
1,240
1,340
1,440
1,990
2,140
2,630
2,830
3,290
3,540
4,230
4,910
Connections
(in.)
Refrigerant
Summer
Charge
R-22 (lbs.)
Approx.
Net Wt.
(lbs.)
2.4
2.4
4.8
4.8
4.8
7.2
7.2
9.6
9.6
12.0
12.0
14.4
16.8
1-3/8
1-3/8
1-3/8
1-5/8
2-1/8
2-1/8
2-1/8
2-1/8
2-5/8
2-5/8
2-5/8
2-5/8
(2) 2-5/8
8
10
10
15
29
22
30
51
70
64
86
102
118
330
360
580
630
680
930
1,000
1,210
1,310
1,510
1,640
1,950
2,240
9.6
9.6
9.6
14.4
14.4
19.2
19.2
24.0
24.0
28.8
33.6
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(4)
19
29
40
44
58
104
140
125
172
201
236
1,240
1,340
1,440
1,990
2,140
2,630
2,830
3,290
3,540
4,230
4,910
Total FLA
230
/3/60
Single Row
5,400
3.5
5,200
3.5
11,200
7.0
10,800
7.0
10,400
7.0
16,100
10.5
15,600
10.5
21,500
14.0
20,800
14.0
26,900
17.5
26,000
17.5
31,200
21.0
36,400
24.5
Double Row
22,300
14.0
21,500
14.0
20,800
14.0
32,300
21.0
31,200
21.0
43,000
28.0
41,600
28.0
53,700
35.0
52,100
35.0
62,500
42.0
72,900
49.0
460
/3/60
1-3/8
1-5/8
2-1/8
2-1/8
2-1/8
2-1/8
2-5/8
2-5/8
2-5/8
2-5/8
2-5/8
Bold indicates standard model capacity at 10 FPI
Altus™ Series Model LNX, 830 RPM, 1.0 HP, 30“ Fan Diameter
LNX
Model
THR, MBH/1°F TD
Total FLA
CFM
R-22
R-404A
LNXS01A006
LNXS01A008
LNXS02A010
LNXS02A013
LNXS02A015
LNXS03A020
LNXS03A023
LNXS04A026
LNXS04A030
LNXS05A033
LNXS05A038
LNXS06A045
LNXS07A052
6.4
7.5
9.8
13.1
15.1
19.7
22.7
26.3
30.3
32.8
37.8
45.4
52.0
6.2
7.4
9.6
12.8
14.8
19.3
22.3
25.7
29.7
32.1
37.1
44.5
51.0
LNXD04A020
LNXD04A026
LNXD04A030
LNXD06A039
LNXD06A045
LNXD08A052
LNXD08A061
LNXD10A066
LNXD10A076
LNXD12A091
LNXD14A104
19.6
26.2
30.3
39.4
45.4
52.5
60.6
65.6
75.7
90.8
104.1
19.2
25.7
29.7
38.6
44.5
51.4
59.3
64.3
74.2
89.0
102.0
230
/3/60
Single Row
7,600
4.8
7,300
4.8
15,900
9.6
15,200
9.6
14,700
9.6
22,900
14.4
22,000
14.4
29,800
19.2
28,400
19.2
37,300
24.0
35,500
24.0
42,600
28.8
49,700
33.6
Double Row
31,700
19.2
30,500
19.2
29,300
19.2
45,700
28.8
44,000
28.8
59,700
38.4
56,800
38.4
74,600
48.0
71,000
48.0
85,200
57.6
99,400
67.2
460
/3/60
1-3/8
1-5/8
2-1/8
2-1/8
2-1/8
2-1/8
2-5/8
2-5/8
2-5/8
2-5/8
2-5/8
Bold indicates standard model capacity at 10 FPI
33
Air-Cooled Condensers
Altus™ Series Model LNL, 830 RPM, 1.5 HP, 30“ Fan Diameter
LNL
Model
THR, MBH/1°F TD
Connections
(in.)
Refrigerant
Summer
Charge
R-22 (lbs.)
Approx.
Net Wt.
(lbs.)
2.6
2.6
5.2
5.2
5.2
7.8
7.8
10.4
10.4
13.0
13.0
15.6
18.2
1-3/8
1-3/8
1-3/8
1-5/8
2-1/8
2-1/8
2-1/8
2-1/8
2-5/8
2-5/8
2-5/8
2-5/8
(2) 2-5/8
8
10
10
15
29
22
30
51
70
64
86
102
118
330
360
580
630
680
930
1,000
1,210
1,310
1,510
1,640
1,950
2,240
10.4
10.4
10.4
15.6
15.6
20.8
20.8
26.0
26.0
31.2
36.4
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(4)
19
29
40
44
58
104
140
125
172
201
236
1,240
1,340
1,440
1,990
2,140
2,630
2,830
3,290
3,540
4,230
4,910
Connections
(in.)
Refrigerant
Summer
Charge
R-22 (lbs.)
Approx.
Net Wt.
(lbs.)
2.8
2.8
5.6
5.6
5.6
8.4
8.4
11.2
11.2
14.0
14.0
16.8
19.6
1-3/8
1-3/8
1-3/8
1-5/8
2-1/8
2-1/8
2-1/8
2-1/8
2-5/8
2-5/8
2-5/8
2-5/8
(2) 2-5/8
8
10
10
15
29
22
30
51
70
64
86
102
118
330
360
580
630
680
930
1,000
1,210
1,310
1,510
1,640
1,950
2,240
11.2
11.2
11.2
16.8
16.8
22.4
22.4
28.0
28.0
33.6
39.2
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(4)
19
29
40
44
58
104
140
125
172
201
236
1,240
1,340
1,440
1,990
2,140
2,630
2,830
3,290
3,540
4,230
4,910
Total FLA
CFM
R-22
R-404A
LNLS01A007
LNLS01A008
LNLS02A010
LNLS02A014
LNLS02A016
LNLS03A021
LNLS03A024
LNLS04A028
LNLS04A032
LNLS05A035
LNLS05A042
LNLS06A050
LNLS07A055
6.7
8.0
10.1
13.9
16.1
20.9
24.2
27.8
32.3
35.5
41.6
49.9
55.0
6.6
7.8
9.9
13.6
15.8
20.5
23.8
27.3
31.7
34.7
40.8
48.9
53.9
8,400
8,000
17,500
16,700
16,100
25,100
24,100
32,800
31,200
41,000
39,100
46,900
54,700
LNLD04A020
LNLD04A028
LNLD04A032
LNLD06A042
LNLD06A048
LNLD08A056
LNLD08A065
LNLD10A071
LNLD10A083
LNLD12A100
LNLD14A110
20.2
27.8
32.3
41.8
48.4
55.7
64.6
70.9
83.1
99.8
110.0
19.8
27.3
31.7
40.9
47.5
54.6
63.3
69.5
81.5
97.8
107.9
35,000
33,500
32,100
50,200
48,200
65,600
62,500
82,000
78,100
93,700
109,300
230
460
/3/60
/3/60
Single Row
6.6
3.3
6.6
3.3
13.2
6.6
13.2
6.6
13.2
6.6
19.8
9.9
19.8
9.9
26.4
13.2
26.4
13.2
33.0
16.5
33.0
16.5
39.6
19.8
46.2
23.1
Double Row
26.4
13.2
26.4
13.2
26.4
13.2
39.6
19.8
39.6
19.8
52.8
26.4
52.8
26.4
66.0
33.8
66.0
33.0
79.2
39.6
92.4
46.2
575
/3/60
1-3/8
1-5/8
2-1/8
2-1/8
2-1/8
2-1/8
2-5/8
2-5/8
2-5/8
2-5/8
2-5/8
Bold indicates standard model capacity at 10 FPI
1140 Series Model LNH, 1140 RPM, 1.5 HP, 30“ Fan Diameter
LNH
Model
THR, MBH/1°F TD
CFM
R-22
R-404A
LNHS01A007
LNHS01A009
LNHS02A011
LNHS02A015
LNHS02A017
LNHS03A022
LNHS03A026
LNHS04A029
LNHS04A034
LNHS05A037
LNHS05A044
LNHS06A053
LNHS07A061
7.3
8.7
10.7
14.5
17.1
21.8
25.7
29.1
34.2
37.1
44.0
52.8
61.0
7.2
8.6
10.5
14.2
16.7
21.4
25.2
28.5
33.5
36.4
43.1
51.7
59.8
9,900
9,500
20,500
19,800
19,000
29,700
28,500
38,600
37,000
48,300
46,200
55,400
64,700
LNHD04A021
LNHD04A029
LNHD04A034
LNHD06A044
LNHD06A051
LNHD08A058
LNHD08A068
LNHD10A074
LNHD10A088
LNHD12A106
LNHD14A122
21.4
29.1
34.2
43.6
51.3
58.2
68.4
74.2
88.0
105.6
121.9
21.0
28.5
33.5
42.8
50.3
57.0
67.1
72.7
86.2
103.5
119.5
41,000
39,600
38,100
59,400
57,100
77,200
73,900
96,500
92,400
110,900
129,400
Bold indicates standard model capacity at 10 FPI
34
Total FLA
208
460
/3/60
/3/60
Single Row
7.0
3.5
7.0
3.5
14.0
7.0
14.0
7.0
14.0
7.0
21.0
10.5
21.0
10.5
28.0
14.0
28.0
14.0
35.0
14.0
35.0
17.5
42.0
17.5
49.0
21.0
Double Row
28.0
24.5
28.0
14.0
28.0
14.0
42.0
21.0
42.0
21.0
56.0
28.0
56.0
28.0
70.0
35.0
70.0
35.0
84.0
42.0
98.0
49.0
575
/3/60
1-3/8
1-5/8
2-1/8
2-1/8
2-1/8
2-1/8
2-5/8
2-5/8
2-5/8
2-5/8
2-5/8
Air-Cooled Condensers
1 - 26 Tons Direct-Drive Air-Cooled Condensers
Model FCB direct-drive air-cooled condensers are the industry standard
for remote air-cooled applications. There are several features that make
this true…versatility and simplicity of design and service are the most
recognized.
•Fully baffled fan sections to provide structural strength and prevent fan ­windmilling in the off cycle
•Multicircuiting at no extra cost
•Optional coils with coated or all copper fins are available for corrosive or damaging atmospheres
•Weatherproof junction box, with motor leads terminating for single-point field wiring
•Available in either vertical or horizontal arrangement
•Fan cycling or variable-speed fan cycling for head ­pressure control
•PVC coated steel fan guards
FCB – 1 - 26 Tons Direct-Drive Air-Cooled Condensers
FCB
Model†
FCB1
FCB1-1/2
FCB2
FCB3
FCB5
FCB8
FCB10
FCB12
FCB14
FCB16
FCB21
FCB23
FCB26
Condenser
Capacity
MBH (R-22)*
TRH 30°F TD
22.9
26.7
30.5
47.1
73.0
120.0
146.0
182.4
209.6
239.6
314.2
339.6
398.2
Dimensions
(in.)
Fan
Qty.
HP
1
1
1
1
1
1
2
2
2
2
3
3
3
1/4
1/4
1/4
1/4
1/3
1/2
1/4
1/2
1/2
1/2
1/2
1/2
1/2
FLA
230V++
2.0
2.0
2.0
2.0
3.4
3.9
6.8
7.8
7.8
7.8
11.7
11.7
11.7
2,400
2,400
2,400
2,100
5,050
6,450
10,100
12,400
13,700
12,900
20,500
19,900
19,400
Connections
(in.)
L
W
H
Inlet
Outlet
Approx.
Net Wt.
(lbs.)
37-1/2
37-1/2
37-1/2
37-1/2
39-3/4
49-3/4
69-3/4
69-3/4
89-3/4
89-3/4
129-3/4
129-3/4
129-3/4
22
22
22
22
43
43
43
43
43
43
43
43
43
22
22
22
22
40-1/2
40-1/2
40-1/2
40-1/2
40-1/2
40-1/2
40-1/2
40-1/2
40-1/2
3/8
5/8
7/8
7/8
1-1/8
1-1/8
(2) 1-1/8
(2) 1-1/8
(2) 1-1/8
(2) 1-3/8
(2) 1-5/8
(2) 1-5/8
(2) 1-5/8
3/8
5/8
5/8
5/8
7/8
7/8
(2) 7/8
(2) 7/8
(2) 7/8
(2) 1-1/8
(2) 1-1/8
(2) 1-1/8
(2) 1-1/8
96
96
96
114
180
260
450
470
510
530
550
580
625
CFM
*For R-404A and R-507, multiply MBH by 0.98
†
FCB models can be applied in horizontal air flow applications
++
208/230/1/60, 3-phase motors available FCB5-26
35
Fluid Coolers
Direct-Drive Fluid Coolers
Model PFG vertical or horizontal air flow direct drive fluid coolers are easy to install and maintain,
yet are ruggedly designed to handle all applications. Available in a variety of sizes, the PFG units
have design features ideal for the commercial/industrial locations. Specifically engineered for outdoor
­installations, the cabinet is constructed of heavy gauge aluminum or prepainted galvanized steel to
resist corrosion in all climates. Additional design features ­include:
• Fully baffled fan sections to prevent windmilling
• Single-point wiring to junction box
• Balanced fans, featuring heavy gauge aluminum blades riveted to plated steel spiders
Model PFG
PFG
Model
CFM
PFG5
PFG8
PFG10
PFG12
PFG14
PFG16
PFG21
PFG23
PFG26
5,050
6,450
10,100
12,400
13,700
12,900
20,500
19,900
19,400
Vol.
in
Gal.
3
4
4
4
5
6
7
7
9
Base Capacity Range 1°F TD,
40% Glycol (130° Average Temp.)
Minimum
Maximum
GPM MBH PD/F GPM MBH PD/F
10
2.23
4.7
30
2.97
15.5
10
3.07
7.4
60
4.62
13.0
10
3.46
7.5
60
6.10
28.2
10
3.62
7.5
60
6.88
28.2
10
3.92
9.4
50
7.64
25.2
10
4.17
12.4
60
8.70
20.9
15
5.93
12.3
120 12.31 25.7
20
6.99
6.8
120 12.94 25.7
20
7.65
12.9
160 14.08 25.7
*Motors also available in 208-230/1, 460/3
36
Motor
Qty.
HP
1
1
2
2
2
2
3
3
3
1/3
1/3
1/3
1/3
1/3
1/3
1/3
1/3
1/3
Dimensions
(in.)
208-230V
3 Ph.
L
2.6
40
2.6
50
5.2
70
5.2
70
5.2
90
2.5
90
7.8
130
7.8
130
7.8
130
H
40-1/2
40-1/2
40-1/2
40-1/2
40-1/2
40-1/2
40-1/2
40-1/2
40-1/2
Connections
(in.)
D
43
43
43
43
43
43
43
43
43
Inlet
1-3/8
1-5/8
2-1/8
2-1/8
2-1/8
2-1/8
2-5/8
2-5/8
2-5/8
Outlet
1-3/8
1-5/8
2-1/8
2-1/8
2-1/8
2-1/8
2-5/8
2-5/8
2-5/8
Approx.
Dry
Net Wt.
(lbs.)
180
260
450
470
510
530
550
580
625
More Products and Technology from Larkin
Why should you be concerned with choosing energy efficiency? Because
it’s smart. Not just for your bottom line, but also for the environment.
Heatcraft Refrigeration Products provides energy-efficient solutions with
evaporators, air-cooled condensers, Beacon II™ Smart Defrost and others.
Look for the new Energy Solutions® logo to identify energy efficient
product lines and features that will help you save money by conserving
energy. Contact your Sales Representative to learn more about our energy
efficient products.
Multiple Compressor
Condensing Units
The FlexPack™ provides many features that produce outstanding
results for both your refrigeration system and your bottom line.
Flexibility for a wide range of applications
• Modular design accommodates up to three compressors
(1/2-6HP Hermetic or Scroll®)
• System capacity range from 5 – 18HP (dependent upon
cabinet size)
Durability and Reliability
• 14-gauge galvanized steel frame
• 1-year parts warranty
• 4-year optional compressor warranty
Reduced installation costs and easy serviceability
• Hinged access panels to refrigeration and electrical
components
• Single roof penetration
• Single-point main power
• Clean and intuitive electrical and piping layout
Energy efficiency and reduced noise
• Remote condenser circuits
• Reduces heat load into space resulting in lower
air conditioning energy costs
• Recessed, vertical-discharge, flush-mounted 18”
fans with 1100 RPM motors
• Reduces noise levels
Clean and uniform appearance
• Painted G-90 steel cabinet
• Small footprint
For more information, contact your Sales Representative
ServiceMate™
ServiceMate™ is an innovative standard feature that provides immediate visual
feedback on the status of system control components. This results in reduced
diagnostic time and equipment downtime — that translates into cost savings
on service calls for customers and time savings for contractors. ServiceMate™
comes standard on all 3-80 HP air-cooled, Discus® and Scroll® condensing units.
For more information, contact your Heatcraft Refrigeration Sales Representative
or visit us online at www.heatcraftrpd.com.
37
38
39
For more information on Larkin products,
contact your Larkin Sales Representative
or visit us at www.larkinproducts.com
Mastering the Art of Cold
A Brand of Heatcraft Refrigeration Products LLC
2175 West Park Place Blvd. • Stone Mountain, GA • 30087
800.848.9889 • FAX 770.465.5990
www.larkinproducts.com
Since product improvement is a continuing effort, we reserve the right to make changes in specifications without notice.
LK-CC-0407 | Version 000