Recommended Vehicle Mounting Solution Chevrolet Caprice PPV

Recommended Vehicle Mounting Solution
Chevrolet Caprice PPV (2011-2013)
Rugged Solutions:
Heavy-Duty Vehicle
Bases & Pedestals
Equipment Console
Boxes
Computer Cradles &
Docking Stations
Follow us on:
Chevrolet Caprice PPV (2011-2013) - Console System
Solution Components:
Rugged Docking Stations and Vehicle Mounts
1. Vehicle Specific Console Box
(Item No. 7160-0379)
No-drill vehicle specific console designed to
work with the vehicle’s current configuration.
The console box attaches to the existing
tunnel plate and is notched out to work
around the center console shifter. Console
box was designed to work with radio control
head only, allowing for passenger side
egress in an emergency situation. Can be
ordered without the armrest and cupholder
(Item No. 7160-0378). Console box comes with
3 blank filler panels and 3 faceplates.
2. Lower Pole System
(Item No. DS-LOWER-5)
The Lower Tube provides vertical clearance
over the center console or the seat. A
Support Brace (Item No. 7160-0230) is highly
recommended to provide additional mount
system support in rugged driving conditions
and reduces mounting system vibration
(support brace not pictured).
4
3
5
3. Upper Pole
(Item No. QADJ-UPPER-S5)
Convenient lever controls left/right rotational
adjustments as well as height adjustments.
Set-collar can be used to stabilize height while
rotational adjustments are made.
4. Motion Attachment - Quad Motion TS3
2
1
6
Gamber-Johnson is the leading manufacturer of quality, rugged docking
stations and vehicle mounts. The solution shown is the recommended
solution, however the components can be mixed and matched so you can
design the solution that fits your specific requirements. Visit Gamber-Johnson’s
website at www.gamberjohnson.com to view the complete line of vehicle
mounts, console boxes and docking stations.
3001 Borham Ave, Stevens Point, WI 54481
Toll Free: 800-456-6868 Fax: 800-934-3577
Email: [email protected]
(Item No. 7160-0284)
Motion Attachment has tilt capabilities up to
90° forward/30° backward and can swivel up to
60° right/60° left on two different pivot points
and can slide up to 3.5” forward/backward.
5. Armrest and cupholder
(Included with console box 7160-0379)
Gamber-Johnson offers a passenger armrest if
needed (7110-0998).
6. Accessories
Gamber-Johnson offers a variety of accessories
for the console box including Accessory Box,
LED lights, mic clips, cigarette adapter kits and
power distribution blocks. (Item No shown:
3130-0361, 7160-0063, 7160-0332, 7110-1000)
This document, including images, may not be reproduced partly or
fully without the expressed written consent of Gamber-Johnson’s
Marketing Department. © Copyright 2013 Gamber-Johnson, LLC