Esteem® + One-Piece Pouch with ConvaTec Mouldable Technology™

Esteem® + One-Piece Pouch with ConvaTec Mouldable Technology™

Esteem® + One-Piece Pouch with
ConvaTec Mouldable Technology™
1
Mouldable Disc application
4
4
4
4
4
4
1. In
the Box
Mouldable
attached.
disc & pouch
come
1. In the Box
Remove
1. In the Box
2. Remove the moldable
disk
pouch.disk from3.the
3. Remo
1. In the Box
Remove
the the
moldable
pouch.liner 1.2. Remove
1. In2.the
Box from
4. Molding.
3. Remove liner 1.
2. Remove the moldable
disk frommouldable
the pouch.
Remove
disc
from the
marked #1. This is 4. Mold
3.Remove
Remove linerliner
1.
2. Remove the moldable disk from the pouch.
pouch.
the moulding side.
4
4. Check
the size
of the
molding.
Place the disk on the
bod
4.Check
Molding.
4.size
Check
size of
the molding. 6. Remove liner 2.4. Check
3. Remove
1. to the size
Place
the
ofthethe
moulding.
Roll
and
theliner
disc
of the
Remove
liner
marked7.#2.
isk from3.the
pouch.
6.
Remove
liner
2.
the size
of
the molding.
4. Molding.
Remove
liner 1.mould
6. 7.
Remov
Molding.
4. 4.
Check
the size of the molding.
7. Place the disk on the body.
8. Remove liner 3.
6. Remove
liner 2.
stoma.
Do not stretch,
pull
or
cut.
Pinch
This
side
will
go
on
the
skin.
4. Check the size of the molding.
7. Place the disk on the body.
8. Rem
6. Remove liner 2.
x
into place once desired size is reached.
3. Remove
3. Remove liner3.1.Remove liner 1. 4. Molding.
2. Remove the moldable
2. Remove
disk from
thethe
pouch. disk
from
the pouch.
2.moldable
Remove
the moldable
disk liner
from1.the pouch.
4. Molding.
4. Molding.
7. Place
8. Remove
3. 9.stoma.
placeliner
for the
10. Remove liner 4.
11. Place the pouch
on
the
Make place for the stoma.
10. Remove
liner
Plac
7. Place
the disk
on3.the
body.the disk on the body.
8. Remove liner 3. 9. Make
9. Make
place for
the4.stoma.
10.11.
Remov
8. Remove
liner
9. Make
place
for the
stoma.
10. Remove
liner 4. Remove liner marked 11.
Place the pouch on the body - 1. Separate the
12. sides
Place theof
pouch
on the body - 2.
Place
the
disk
on the body.
Push
the
roll
#3.
the
9. Make place for the stoma.
10. Remove liner 4.
11. Place the pouch on the body - 1.
12. Pl
of adhesive toward the stoma to ensure
a close fit. Skin should be clean and dry.
2
eolding.
size of 6.
the
molding.
Remove
liner 2.
pouch to allow some air to
enter the pouch.
7. body.
Place the disk
thethe
body.
Remove
6. Remove liner
7. on
Place
disk on8.the
body. liner 3.
6.2.
Remove liner 2. 7. Place the disk on the
Applying pouch to the Mouldable Disc
8. Remove liner8.3.Remove liner 3.
11. the
Place
the-pouch
12. the
Place
the-pouch
on the body - 2.
11. Place
the pouch
on
1. - 2. on the body - 1.12. Place the pouch on
body
2.
12. Place
the pouch
on body
the body
ma.
10.stoma.
Remove liner 4. 10. Remove liner
11.the
Place
body
the- 1.
pouch
on the
1.
Place
the -pouch
on
12.the
Place
body
the- 2.
pouch
on the
ce for the
10.4.
Remove liner 4.11. Place the pouch on
11. Place
the body
pouch- 12.
on the
body
1.
12. Place
the body
pouch- 2.
on the body - 2.
Remove pouch release liner.
Refer to package insert for complete instructions.
Place pouch on the mouldable disc
Smooth/hold skin barrier in place
for about 30 seconds.
Esteem® + One-Piece Pouch with
ConvaTec Mouldable Technology™
3
InvisiClose™ Tail Closure
13. Closing the pouch - 1.
14. Closing the pouch - 2.
13. Closing
pouch
1.
14.until
Closing
the pouch
2. closures
15. Closing
the pouch
- Pocket
3.
16.
- 1.of
13.To
Closing
the pouch
13. Closing
-pouch,
1.
the pouch
-the
1. the
14.-Closing
the pouch
14. Closing
- 2.3 times
the pouch
- 2. interlocking
15.- Closing
the pouch
15. line
Closing
- 3. up.
the pouch
- 3.a small
close
the
fold
end
up
towards
you
Keep
amount
pouch. Press and pinch across the entire closure to secure.
15. Closing the pouch - 3.
16. in
Pocket
air
the- 1.
13. Closing the pouch - 1.
16.For
Pocket
- 1.
added
discretion, turn the
17. Pocket - 2.
17. Pocket - 2. 17. Pocket - 2.
15. Closing the pouch - 3.
15. Closing the pouch - 3.
4
™ Pocket - 2.
Lock-it-Pocket17.
inside-out to hide tail inside.
18. Emptying the pouch - 1.
16. Pocket - 1.
20. Emptying the pouch - 3.
21. Remove the pouch.
21. Remove the pouch.
21. Remove the pouch.
16. Pocket - 1.
19. Emptying the pouch -
17. Pocket - 2.
21. Remove the pouch.
20. Emptying the pouch - 3.
19. Emptying the pouch - 2.
To empty 19.
pouch,
tilt tail up towards
the body. Peel
open the closure
20. Emptying the pouch - 3.
Emptying the pouch - 2.
unravel tail. For easier opening, push sides together.
and
When it’s time to change pouch,
or closed-end)
the disc and pouch can be
removed as one.
21.
Remove
the pouch.
(either
drainable
Notes: Please call 1800 335 276 for further information or visit www.convatec.com.au
™ indicates trademarks of ConvaTec Inc. Esteem is a registered trademark in the U.S.
AP-014407-MM
14. Cl
Empty
Emptying
- 1.
Emptying
- 2.
20. Emptying
the pouch
20. Emptying
- 3.
the20.
pouch
18. Emptying the pouch
18. Emptying
- 1.
the18.
pouch
- 1. the pouch
19. Emptying
the pouch
19. Emptying
- 2.
the19.
pouch
- 2. the pouch
Emptying and removing drainable pouch
© 2014 ConvaTec Inc.
16. Pocke
September 2014
O440
ConvaTec (Australia) Pty Limited. ABN 70 131 232 570. PO Box 63, Mulgrave, VIC 3170. Phone: (03) 9239 2700 Facsimile: (03) 9239 2742.
ConvaTec (New Zealand) Limited. AK2135265 PO Box 62663, Greenlane 1546 New Zealand. Phone: 0800 441 763. www.convatec.com.au
18. Em