cree® Xlamp® Xt

Transcription

cree® Xlamp® Xt

®
®
Cree XLamp XT-E LEDs
Product Description
FEATURES
Table of contents
XLamp
• Available in white, 80-CRI min
white, 70-min CRI white and
royal blue
Product Characteristics................ 2
XT-E
is
Cree’s
highest
performing silicon carbide-based
LED
technology,
Cree’s
delivered
industry-standard
in
XP/XT
• Binned at 85 °C
Relative Spectral Power
Distribution ............................... 4
Relative Luminous Flux vs.
Electrical Characteristics.............. 6
cost. XT-E Royal Blue is Cree’s
• Royal Blue wall plug efficiency of
up to 53% (@ 85 °C, 350 mA)
highest performing source of royal
• Wide viewing angle: 115-140°
Current..................................... 6
new standard for high performance
and dramatically lowers system
blue
light
for
remote-phosphor
applications.
• Thermal resistance: 5 °C/W
• Maximum drive current: 1.5 A
Cree
XLamp
performance
LEDs
bring
and
quality
high
of
light to a wide range of lighting
applications,
including
remote-
phosphor, color-changing, portable
and
personal,
outdoor,
indoor-
directional, transportation, stage
and
studio,
commercial
emergency-vehicle lighting.
WWW.CREE.COM/XLAMP
Flux Characteristics..................... 2
• Cool white efficacy of up to
148 lm/W (@ 85 °C, 350 mA)
packaging. XT-E White sets the
and
• Electrically neutral thermal path
• Vf binning supported for XT-E
White and Royal Blue
• XT-E Royal Blue sorted into 2.5nm wavelength bins
CLD-DS41 Rev 2B
Product family data sheet
Junction Temperature.................. 5
Relative Luminous Flux vs.
Relative Chromaticity vs. Current
and Temperature........................ 8
Typical Spatial Distribution........... 9
Thermal Design.........................10
Reflow Soldering Characteristics..11
Notes.......................................12
Mechanical Dimensions..............13
Tape and Reel...........................14
Packaging.................................15
• Unlimited floor life at
≤ 30 ºC/85% RH
• Reflow solderable - JEDEC
J-STD-020C Compatible
• RoHS- and REACH-compliant
NOTE: For remote phosphor applications, a separate license to certain Cree patents is required.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
Copyright © 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
Cree, Inc.
Cree,Drive
Inc.
4600 Silicon
4600 Silicon
Drive
Durham,
NC 27703
NC 27703
USA Tel:Durham,
+1.919.313.5300
USA Tel:
+1.919.313.5300
www.cree.com/xlamp
xlamp XT-E LEDs
Product Characteristics
Characteristics
Unit
Minimum
Thermal resistance, junction to solder point
°C/W
5
Viewing angle (FWHM) - white
degrees
115
Viewing angle (FWHM) - royal blue
degrees
140
Temperature coefficient of voltage
mV/°C
-2.5
ESD classification (HBM per Mil-Std-883D)
Typical
Maximum
Class 2
DC forward current
mA
1500
Reverse voltage
V
5
Forward voltage (@ 350 mA, 85 °C)
V
LED junction temperature
°C
2.85
3.4
150
Flux Characteristics - White (TJ = 85 °C)
The following table provides several base order codes for XLamp XT-E White LEDs. It is important to note that the base
order codes listed here are a subset of the total available order codes for the product family. For more order codes, as
well as a complete description of the order-code nomenclature, please consult the XLamp XT-E Binning and Labeling
document.
Color
CCT Range
Min.
Cool White
Outdoor White
Neutral White
70 CRI Minimum
Neutral White
5,000 K
4,000 K
3,700 K
3,700 K
Max.
8,300 K
6,200 K
5,000 K
5,000 K
Base Order Codes
Minimum Luminous
Flux @ 350 mA (lm)
Calculated Minimum
Luminous Flux (lm)*
Order Code
Group
Flux (lm)
700 mA
1500 mA
R3
122
217
369
XTEAWT-00-0000-000000F51
R4
130
231
393
XTEAWT-00-0000-000000G51
R5
139
247
420
XTEAWT-00-0000-000000H51
R3
122
217
369
XTEAWT-00-0000-000000FE3
R4
130
231
393
XTEAWT-00-0000-000000GE3
R5
139
247
420
XTEAWT-00-0000-000000HE3
R2
114
203
354
XTEAWT-00-0000-000000EF4
R3
122
217
369
XTEAWT-00-0000-000000FF4
R4
130
231
393
XTEAWT-00-0000-000000GF4
Q5
107
190
324
XTEAWT-00-0000-00000BDF5
R2
114
203
354
XTEAWT-00-0000-00000BEF5
R3
122
217
369
XTEAWT-00-0000-00000BFF5
Notes:
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2
on CRI measurements.
• Typical CRI for Neutral White, 3700 K - 5000K CCT is 75.
• Typical CRI for Warm White, 2600 K - 3700 K CCT is 80.
• Calculated flux values are for reference only
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered tradeof Cree, Inc.
marks of Cree, Inc.
2
xlamp XT-E LEDs
Flux Characteristics - White (TJ = 85 °C)
Base Order Codes
Minimum Luminous
Flux @ 350 mA (lm)
CCT Range
Color
Min.
80 CRI Minimum
White
2,600 K
Warm White
2,600 K
70 CRI Minimum
Warm White
2,600 K
Max.
4,300 K
3,700 K
3,700 K
Calculated Minimum
Luminous Flux (lm)*
Order Code
Group
Flux (lm)
700 mA
1500 mA
Q3
93.9
167
284
XTEAWT-00-0000-00000HBE7
Q4
100
178
302
XTEAWT-00-0000-00000HCE7
Q5
107
190
324
XTEAWT-00-0000-00000HDE7
Q3
93.9
167
284
XTEAWT-00-0000-00000LBE7
Q4
100
178
302
XTEAWT-00-0000-00000LCE7
Q5
107
190
324
XTEAWT-00-0000-00000LDE7
Q4
100
167
284
XTEAWT-00-0000-00000BCE7
Q5
107
178
302
XTEAWT-00-0000-00000BDE7
R2
114
190
324
XTEAWT-00-0000-00000BEE7
Notes:
• Typical CRI for Neutral White, 3700 K - 5000K CCT is 75.
• Typical CRI for Warm White, 2600 K - 3700 K CCT is 80.
• Calculated flux values are for reference only
Flux Characteristics - Royal Blue (TJ = 85 °C)
The following table provides order codes for XLamp XT-E Royal Blue LEDs. Additional information on the performance
grouping and codes for XT-E Royal Blue LEDs can be found in the XT-E Binning and Labeling document.
Dominant Wavelength Range
DWL
Kit
Codes
Min.
Order Codes, Minimum Radiant Flux @ 350 mA, Tj=85 °C
Max.
Group
DWL
(nm)
Group
DWL
(nm)
475 mW
500 mW
525 mW
550 mW
01
D36
450
D57
465
XTEARY-00-0000-000000K01
XTEARY-00-0000-000000L01
XTEARY-00-0000-000000M01
XTEARY-00-0000-000000N01
02
D36
450
D47
460
XTEARY-00-0000-000000K02
XTEARY-00-0000-000000L02
XTEARY-00-0000-000000M02
XTEARY-00-0000-000000N02
03
D46
455
D57
465
XTEARY-00-0000-000000K03
XTEARY-00-0000-000000L03
XTEARY-00-0000-000000M03
XTEARY-00-0000-000000N03
04
D36
450
D37
455
XTEARY-00-0000-000000K04
XTEARY-00-0000-000000L04
XTEARY-00-0000-000000M04
XTEARY-00-0000-000000N04
05
D46
455
D47
460
XTEARY-00-0000-000000K05
XTEARY-00-0000-000000L05
XTEARY-00-0000-000000M05
XTEARY-00-0000-000000N05
06
D56
460
D57
465
XTEARY-00-0000-000000K06
XTEARY-00-0000-000000L06
XTEARY-00-0000-000000M06
XTEARY-00-0000-000000N06
07
D37
452.5
D46
457.5
XTEARY-00-0000-000000K07
XTEARY-00-0000-000000L07
XTEARY-00-0000-000000M07
XTEARY-00-0000-000000N07
08
D47
457.5
D56
462.5
XTEARY-00-0000-000000K08
XTEARY-00-0000-000000L08
XTEARY-00-0000-000000M08
XTEARY-00-0000-000000N08
09
D37
452.5
D56
462.5
XTEARY-00-0000-000000K09
XTEARY-00-0000-000000L09
XTEARY-00-0000-000000M09
XTEARY-00-0000-000000N09
Note:
Copyright
marks of Cree, Inc.
3
xlamp XT-E LEDs
Relative Spectral
Power
Relative Spectral
Power Distribution
- White
Relative Radiant Power (%)
100
80
60
5000K - 8300K CCT
2600K - 3700K CCT
40
20
0
400
450
500
550
600
650
700
750
Wavelength (nm)
Relative sPECTRAL pOWER dISTRIBUTION - Royal Blue
Relative Spectral Power
Relative Radiant Power (%)
100%
80%
60%
Royal Blue
40%
20%
0%
400
450
500
550
600
650
700
750
Wavelength (nm)
Copyright
marks of Cree, Inc.
4
xlamp XT-E LEDs
Relative Flux Output vs. Junction Temperature
Relative Luminous Flux vs. Junction Temperature (IF = 350 mA) - White
Relative Luminous Flux
120%
100%
80%
60%
40%
20%
0%
25
50
75
100
125
150
Junction Temperature (ºC)
Relative Flux Output vs. Junction Temperature
Relative Radiant Flux vs. Junction Temperature (IF = 350 mA) - Royal Blue
Relative Radiant Flux
120%
100%
80%
60%
40%
20%
0%
25
50
75
100
125
150
Junction Temperature (ºC)
Copyright
marks of Cree, Inc.
5
xlamp XT-E LEDs
Electrical Characteristics
= 85ºC)
Electrical(TjCharacteristics
(TJ = 85 °C)
1600
Forward Current (mA)
1400
1200
1000
800
600
400
200
0
2.50
2.75
3.00
3.25
3.50
Forward Voltage (V)
Relative Intensity vs. Current (Tj = 85ºC)
Relative Luminous Flux vs. Current (TJ = 85 °C) - White
Relative Luminous Flux (%)
350%
300%
250%
200%
150%
100%
50%
0%
0
200
400
600
800
1000
1200
1400
1600
Copyright
marks of Cree, Inc.
6
Relative Radiant Flux vs. Current (Tj = 85ºC)
xlamp XT-E LEDs
Relative Radiant Flux vs. Current (TJ = 85 °C) - Royal Blue
Relative Radiant Flux (%)
350%
300%
250%
200%
150%
100%
50%
0%
0
200
400
600
800
1000
1200
1400
1600
Copyright
marks of Cree, Inc.
7
xlamp XT-E LEDs
Chromaticity Vs.
Current,
WW
Relative Relative
Chromaticity
vs.
Current
and Temperature (Warm White)
0.020
TJ = 85 °C
0.015
0.010
0.005
0.000
ΔCCx
ΔCCy
-0.005
-0.010
-0.015
-0.020
0
200
400
600
800
1000
Relative Chromaticity Vs. Temperature
WW (mA)
Current
1200
1400
1600
0.020
IF = 350 mA
0.015
0.010
0.005
0.000
ΔCCx
ΔCCy
-0.005
-0.010
-0.015
-0.020
0
20
40
60
80
Tsp (°C)
100
120
140
160
Copyright
marks of Cree, Inc.
8
xlamp XT-E LEDs
Typical Spatial Radiation Pattern
Typical Spatial Distribution - White
Relative Luminous Intensity (%)
120
100
80
60
40
20
0
-90
-70
-50
-30
-10
10
30
50
70
90
Angle (º)
pical Spatial Distribution
Typical Spatial Distribution - Royal Blue
Relative Luminous Intensity (%)
120
100
80
60
40
20
0
-90
-70
-50
-30
-10
10
30
50
70
90
Angle (º)
Copyright
marks of Cree, Inc.
9
xlamp XT-E LEDs
Thermal Design
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is
Thermal
Design
crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to
ambient in order to optimize lamp life and optical characteristics.
1600
Maximum Current (mA)
1400
1200
1000
800
Rj-a
Rj-a
Rj-a
Rj-a
600
400
=
=
=
=
10°C/W
15°C/W
20°C/W
25°C/W
200
0
0
20
40
60
80
100
120
140
Ambient Temperature (ºC)
Copyright
marks of Cree, Inc.
10
xlamp XT-E LEDs
Reflow Soldering Characteristics
In testing, Cree has found XLamp XT-E LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed
below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the
manufacturer of solder paste used.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
tP
TP
Critical Zone
TL to TP
Temperature
Ramp-up
TL
tS
Tsmax
Tsmin
Ramp-down
ts
Preheat
25
Profile Feature
t 25˚C to Peak
Time
Lead-Based Solder
Lead-Free Solder
3 °C/second max.
3 °C/second max.
Preheat: Temperature Min (Tsmin)
100 °C
150 °C
Preheat: Temperature Max (Tsmax)
150 °C
200 °C
60-120 seconds
60-180 seconds
183 °C
217 °C
60-150 seconds
60-150 seconds
215 °C
260 °C
10-30 seconds
20-40 seconds
6 °C/second max.
6 °C/second max.
6 minutes max.
8 minutes max.
Average Ramp-Up Rate (Tsmax to Tp)
Preheat: Time (tsmin to tsmax)
Time Maintained Above: Temperature (TL)
Time Maintained Above: Time (tL)
Peak/Classification Temperature (Tp)
Time Within 5 °C of Actual Peak Temperature (tp)
Ramp-Down Rate
Time 25 °C to Peak Temperature
Note: All temperatures refer to the topside of the package, measured on the package body surface.
Copyright
marks of Cree, Inc.
11
xlamp XT-E LEDs
Notes
Lumen Maintenance Projections
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED
lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80
results document at www.cree.com/~/media/Files/Cree/LED%20Components%20and%20Modules/XLamp/XLamp%20
Application%20Notes/LM80_Results.pdf.
Please read the XLamp Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance
testing and forecasting. Please read the XLamp Thermal Management application note for details on how thermal design,
ambient temperature, and drive current affect the LED junction temperature.
Moisture Sensitivity
In testing, Cree has found XLamp XT-E LEDs to have unlimited floor life in conditions ≤30 ºC/85% relative humidity
(RH). Moisture testing included a 168-hour soak at 85 ºC/85% RH followed by 3 reflow cycles, with visual and electrical
inspections at each stage.
Cree recommends keeping XLamp LEDs in their sealed moisture-barrier packaging until immediately prior to use. Cree
also recommends returning any unused LEDS to the resealable moisture-barrier bag and closing the bag immediately
fter use.
RoHS Compliance
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or
otherwise restricted materials in this product are below the maximum concentration values (also referred to as the
threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive
2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS),
as amended through April 21, 2006.
Vision Advisory Claim
WARNING: Do not look at exposed lamp in operation. Eye injury can result. See LED Eye Safety at www.cree.com/~/media/
Files/Cree/LED%20Components%20and%20Modules/XLamp/XLamp%20Application%20Notes/XLamp_EyeSafety.pdf.
Copyright
marks of Cree, Inc.
12
3.30
xlamp XT-E LEDs
.65
.650
1.30
R1.530
Mechanical Dimensions
6
1.15
5
4
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
6
.60
CONTAINED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC.
THIS PLOT
NOTICE
1.20
6
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED
TO ANY
UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT
.60 AND
CONTAINED WITHIN ARENOTICE
THE PROPRIETARY
OF CREE INC.
3
5
4
All measurements are ±.13 mm unless otherwise
indicated.
5
CONFIDENTIAL
INFORMATION
CREE,
PLOT
CREE CONFIDENTIAL.
THISOF
PLOT
ANDINC.
THETHIS
INFORMATION
MAY
NOT BE COPIED,
REPRODUCED
OR DISCLOSED
CONTAINED
WITHIN
ARE THE PROPRIETARY
AND TO ANY
UNAUTHORIZED
PERSON
WITHOUT
WRITTEN
CONSENT
CONFIDENTIAL
INFORMATION
OFTHE
CREE,
INC. THIS
PLOT
OF MAY
CREENOT
INC.BE COPIED, REPRODUCED OR DISCLOSED TO ANY
OF CREE INC.
D
D
.40
3.20
3.450
.40
REV
R
2.36
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
.XX ±
.25
.XXX ±
.125
X°
±
.5 °
3.450
.83
RECOMMENDED STENCIL PATTERN
3.450
(HATCHED AREA IS OPENING)
THIRD ANGLE PROJECTION
FOR SHEET METAL PARTS ONLY
.X
±
1.5
.XX ±
.75
.XXX ±
.25
X°
±
.5 °
5
4
2.30
DATE
DRAWN BY
D. CRONIN
2.36
3/8/11
CHECK
--
2.36
MATERIAL
Fax (919) 313-5558
A
2.30
DATE
.50--
TITLE
.83
OUTLINE DRAWING XP HEW
1.15
-- .83
SIZE
C
FINAL PROTECTIVE FINISH
3
Phone (919) 313-5300
--
APPROVED
--
4600 Silicon Drive
Durham, N.C 27703
1.15
DATE
SURFACE FINISH: 1.6
C
REV
ANODE
3.20
MENDED PCB SOLDER PAD
REMOVED CHIP DIMENSIONS
3
1.60
1.30
3.30
DESCRIPTION
B
.40
D
B
4
REVISONS
B
REV
3
B
3.30
1.65
2
--
SCALE
REV.
2610-00015
.50
2
B
SHEET
.50
24.000
2.30
1.15
DRAWING NO.
OF
1 /1
1
3.450
3.30
C
ANODE
C
3.450
3.450
.65
.650
1.30
R1.530
Top View
B
.50
B.50
1.15
.60 1.60
.40
1.65
.40
3.30
1.65
3.30
.40
1.30
3.30
.50
3.30
5
RECOMMENDED PCB
SOLDER PAD
A
6
1.60
4
RECOMMENDED
PCBSolder
SOLDER PAD
Recommended
PCB
Pad
3.20
DIMENSIONS ARE IN
.XX ±
.25
.XXX ±
.125
X°
±
.5 °
1.60
.40
(HATCHED AREA IS
OPENING)
1.30
.50
.40
.40
1.65
.40
3.20
.40
3.20
3.30
RECOMMENDED
PCB SOLDER PAD
.40
A
.60
1.20 .60
3.20 1.20
.60
.50
.50
A
3.30
1.30
.50
1.30
1.30
.65
.50
.65
.60
1.15
.65
.65
.650
.60
1.20 R1.530
.50
.40
.650
R1.530
.65
B
Bottom View
Side View
1.15
.40
3.20.40
.X
±
1.5
.XX ±
.75
.XXX ±
.25
X°
±
.5 °
DATE
DRAWN BY
D. CRONIN
CHECK
3/8/11
DATE
-APPROVED
--
-DATE
TITLE
--
OUTLINE D
MATERIAL
SIZE
UNLESS--OTHERWISE SPECIFIED
D. CRON
FINAL PROTECTIVE
FINISH
3.20
DIMENSIONS
ARE IN
DRAWN
CHECK
MILLIMETERS
AFTER FINISH.
UNLESSAND
OTHERWISE
SPECIFIED
SCALE
D.
SURFACE FINISH: 1.6
--DIMENSIONS
-- C
TOLERANCE
UNLESS SPECIFIED:
ARE IN24.000
CHECK
.XX
±
.25
(HATCHED AREA IS OPENING)
APPROVED
MILLIMETERS
AND AFTER FINISH.
3
2
RECOMMENDED STENCIL
PATTERN
.XXX ±UNLESS
.125SPECIFIED:
TOLERANCE
-X° .XX
±
±.5 ° .25
(HATCHED AREA IS OPENING) THIRD ANGLE PROJECTION
APPROV
.XXX PARTS
±
.125
FOR SHEET METAL
ONLY MATERIAL
± 1.5 .5 °
.X X°
±
.XX ±METAL
.75PARTS ONLY MATERI
FOR SHEET
.XXX.X ± ± .25 1.5
FINAL PROTECTI
X° .XX
±
±.5 ° .75
C
DRAWN
BY
DRAWING
Recommended Stencil Pattern
(Shaded Area Is Open)
6
5
6
4
5
.XXX 1.6
±
SURFACE FINISH:
X°
±
.25
.5 °
SURFACE FINISH: 1.6
3
4
3
Copyright
marks of Cree, Inc.
13
FINAL PRO
xlamp XT-E LEDs
6
Tape and Reel
5
6
4
5
3
+.10 +.0039
4
2
NOTICE
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT REV
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
OF CREE INC.
NOTICE
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
OF CREE INC.
3
1
REV
BY
DATE
D
4.00 [.157]
Po
All dimensions in mm.
6
5
4
3
2
BY
DESCRIPTION
+.10 +.0039
-.00[.0591-.0000]Do
1.75 [.069]
E1
4.39
[.173]
5
8.00 [.315]
P
5.50 [.217]F
NOTICE
ONFIDENTIAL. THIS PLOT AND THE INFORMATION
NED WITHIN ARE THE PROPRIETARY AND
DENTIAL INFORMATION OF CREE, INC. THIS PLOT
OT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
HORIZED PERSON WITHOUTTHE WRITTEN CONSENT
E INC.
4.39 [.173]
C
12.30 [.484]
MAX
W B
7.3°
10.25
[.404]
E2
B
12.00 [.472]
NOMINAL
12.30 [.484]
MAX
W
10.25
[.404]
E2
D
8.00 [.315]
2P
.30 [.012]
REVISONS
T
1.50 [.059]
D1
DESCRIPTION
Ko
1
BY
ADDED CATHODE AND ANODE NOTE
REORIENTED DEVICE
B
+.10 4.39 [.173]
+.0039
.0937
-.00[
-.0000]
4.39
[.173]
5.50 [.217]F
REV
2.38
1.75 [.069]
E1
C
3.78 [.149]
Bo
1.50 [.059]3
D1
12.00 [.472]
NOMINAL
4
-.00[.0591-.0000]Do
3.78 [.149]
Bo
APP'D
12.30 [.484]
MAX
W
10.25
[.404]
E2
C
4.00 [.157]C
Po
DATE
12.00 [.472]
NOMINAL
5.50 [.217]F
1.50
6
4.39
[.173]
1
REV
2.00 [.079]
P2
D
D
REVISONS
NOTICE
OF CREE INC.
+.10 +.0039
4.00 [.157]
Po
1.75 [.069]
E1
DATE
DC
2.38
C
7.3°
APP'D
+.10
+.0039
2/26/12.0937
-.00[
-.0000]
POCK
A
B
8±.1
END
6
4±.1
5
D
START
5
4
Loaded Pockets
(1000 Lamps)
6
Bo -
3.78mm [.149"]
Ko -
2.38mm [.094"]
DRAWN BY
DATE
CHECK
DATE
APPROVED
DATE
4
CHECK
--
DATE
4600 Silicon Drive
Durham, N.C 27703
05/02/11
2.5±.1
DATE
--
Phone (919) 313-5300
--
APPROVED
Fax (919) 313-5558
TITLE
--
2CARRIER TAPE XP HEW
MATERIAL
--
5
12.0
INDEX
+.3 --.0 1 2
2
SIZE
C
QTY
SHEET
DRAWING SCALE
1
2
2400-00009-CORE
2400-00009-REEL
1
2400-00009
2402-00018
4
OF
ACOMMENTS
3.78m
Ko -
2.38m
.X ±
1.5
.XX ±
.75
.XXX ±
.25
X°
±
.5 °
SURFACE FINISH: 1.6
REV.
DRAWING NO.
ITEM
SCALE
3.78m
Bo -
DIMENSIONS ARE IN
.XX ±
.25
.XXX ±
.125
X°
±
.5 °
A
DATE
--
Ao -
3
1
Phone (919) 313-5300
Fax (919) 313-5558
A
TITLE
D
CARRIER TAPE XP HEW
SIZE
C
REV.
DRAWING NO.
2402-00018
SCALE
SHEET
DRAWING SCALE
2
A
OF
1 /1
1
User Feed Direction
B
Carrier Tape
C
12.4
+.2
.0
MEASURED AT HUB
C
Pocket Tape
330
+.25
-.75
16.4
+0.2
.0
MEASURED AT HUB
13mm
7"
B
DIMENSIONS ARE IN
.XX ±
.25
.XXX ±
.125
X°
±
.5 °
.X
±
1.5
.XX ±
.75
.XXX ±
.25
X°
±
.5 °
SURFACE FINISH:
6
5
4
3
1.9±.4
21 ±.4
DATE
DRAWN BY
D. CRONIN
4600 Silicon Drive
Durham, N.C 27703
11/29/10
CHECK
DATE
--
13.1 ±.2
APPROVED
Phone (919) 313-5300
--
Fax (919) 313-5558
--
TITLE
XP HEW LOADING SPEC
--
SIZE
1.6
12.4
+1.0
-.5
MEASURED AT EDGE
A
DATE
--
MATERIAL
--
SCALE
REV.
DRAWING NO.
C
2402-00014
SHEET
3.000
2
B
OF
B
1 /1
1
60°
60°
REVISONS
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree,
the Cree logo
and XLamp are registered
REV
BY
DATE trademarks
APP'D
DESCRIPTION
Copyright
marks of Cree, Inc.
DRAWN BY
A
DIMENSIONS ARE IN INCHES
AND AFTER FINISH.
.XX ±
.01
.XXX ±
.005
X°
±
.5 °
D. CRONIN
CHECK
DATE
4600 Silicon Drive
Durham, N.C 27703
09/29/09
DATE
-APPROVED
-MATERIAL
Fax (919) 313-5558
DATE
--
14
Phone (919) 313-5300
--
DATE
DRAWN BY
D. CRONIN
CHECK
TITLE
REEL, 13" X 12MM, 3 PIECE SNAP
A
05/02/11
DATE
--
-DATE
APPROVED
--
--
T
MATERIAL
--
SI
-2
C
1 /1
4600 Silicon Drive
Durham, N.C 27703
MATERIAL
3
B
D. CRONIN
3
D. CRONIN
05/02/11
Leader
400mm (min.)
of --empty pockets-- with -least
100mm
FOR SHEET METALat
PARTS
ONLY
.X ±
1.5
by tape
-.XX ± sealed
.75
±
.25
(50.XXX
pockets min.)
X° empty
±
.5 °
DIMENSIONS ARE IN
.XX ±
.25
.XXX ±
.125
X°
±
.5 °
2.38mm [.094"]
DRAWN BY
SURFACE FINISH: 1.6
5
.X
±
1.5
.XX ±
.75
.XXX ±
.25
X°
±
.5 °
3.78mm [.149"]
SURFACE FINISH: 1.6
6
1.75
±.10
POCKET
SIZE
3
Ao -
ANODE SIDE
Trailer
160mm (min) of
empty pockets
sealed with tape
(20 pockets min.)
A
DIMENSIONS ARE IN
.XX ±
.25
.XXX ±
.125
X°
±
.5 °
4
3.78mm [.149"]
Ko -
CATHODE SIDE
NOTICE
CONTANED WITHIN ARE THE PROPRIETARY AND
3.78 [.149]
6 Ao
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
OF CREE INC.
3.78mm [.149"]
Bo -
7.3°
D
[.149]
Ao
.30 [.012]
T
+.10
+.0039
2.38
.0937
Ko
User Feed Direction
-.00[
-.0000]
A
1.5± .1
4.39 [.173]
Ao3.78-
1.50 [.059]
D1
3.78 [.149]
Ao
Ko
B
POCKET SIZE
8.00 [.315]
P
DESCRIPT
APP'D
1.50
2.00 [.079]
1.50
-.00[.0591-.0000]Do
2.00 [.079]
P2
All Cree carrier tapes conform
to EIA-481D, Automated Component
Handling
Systems Standard.
P2
D
2
REVISONS
DESCRIPTION
SC
D
Dessicant
Desiccant
xlamp XT-E LEDs
(inside
bag)
(inside bag)
Humidity
Indicator
Humidity
Indicator
Card (inside
bag)bag)
(inside
Packaging
Vacuum-Sealed
Vacuum-Sealed
Moisture
Barrier Bag
Moisture Barrier Bag
Vacuum-Sealed
Vacuum-Sealed
Moisture
Barrier Bag
Moisture Barrier Bag
Label Bin
with
Cree Bin
CREE
Code
&
Barcode
Label
Code,
Qty,
Lot #
Label
CREE
Binwith
Code Cree Bin
&
Barcode
LabelLot #
Code,
Qty,
Label
with
Cree Bin
Label with
Customer
P/N, Qty,
Lot #,
PO##
Code,
Qty,
Lot
Label
with
Cree Bin
Label with
Customer
P/N, Qty,Qty,
Lot #, Lot
PO # #
Code,
Patent Label
Patent Label
Label with Customer Order
Code, Qty, Reel ID, PO #
Label with Customer Order
Code, Qty, Reel ID, PO #
Label with Customer Order Code,
Qty, Reel ID, PO#
Label with Cree Bin Code,
Qty, Lot #
Copyright
marks of Cree, Inc.
15

cree® Xlamp® Xt

Transcription

Similar documents

Heatron Ascendia High-Performance LED Board Datasheet

Agenda - Cree Nation Youth Council

Pamphlet - Hydro

Cree Nation of Nemaska

SAPOTAWEYAK CREE NATION - Frontiers Foundation Manitoba

Job Opportunities - Association de l`exploration minière du Québec

Reserve Creation