sTORAGE sYsTEMs 2014/2015
Transcription
sTORAGE sYsTEMs 2014/2015
s TO R A G E S Y S T E M S 2 0 1 4 / 2 0 1 5 the World of excellence We realize practical solutions For the economical success of a rental Our service is: Producing proposals for operation and the service work shop, Positioning the storage systems based the shop design a professional planning of the total on the quantities which are Establishing of plans situation is of great importance. Based requested On request a display in 3-D on our many years of experience, we We do realize individual solutions can plan the best solution for you. following your shop concept © Montana Sport International AG: Products are subject to change without notice. 2 Need to know about MONTANA abs Racks and dryers for boots Boot Rack Speed Dryer 4-5 6 7 Boot Rack Dryer Vario / HelmetsHelmet Rack Dryer Vario 9 Disinfection devicesNeutralizer 10 10 Ionisation Apparatus Storage systems for ski & snowboardsSwingcarver 12 13 Butler 1 + 2 Service Rack 13 Universal14 Universal Wall 15 Presentation Rack 15 Easy Hang 16-17 Snowboard18 Racks for ski poles Pole Rack Flip Clip 19 20 Accessories21 Installations Self Terminal 23 Sitting benches 24 25 Adjusting table Cashier desk 25 DepotsComfort Skisafe 26 Depot lockers 28-29 Boot Rack Air Depot 30 Universal Depot 31 Snowboard Depot 31 T H E M O N TA N A S TO R A G E S Y S T E M Efficient and innovative For many years, professionals worldwide have had confidence in abs from MONTANA when the storage of skis and boards is concerned. Perfect presentation, perfect handling In the MONTANA storage system, your skis and snowboards will be shown at their best. The handling has been constructed according to the latest ergonomic knowledge and allows a quick turn around of your products coming in and going out. Top quality in every aspect As always, MONTANA will be of assistance to you also after the Made in Switzerland purchase. Our complete service For abs plus, only high quality organization is available during the materials with the latest technology season on weekends. are used. All racks are made of high quality, "sendzimir” galvanized and Light and stable coil coated steel sheet. The goal is best Thanks to the honeycomb technique, stability with minimum weight. On all MONTANA abs racks have a high request, the new storage system can stability. be completely mounted in your facility by our technicians. 4 Individual construction possibilities MONTANA abs can be integrated in harmony in any existing shop concept, either in a strictly functional basic version or in an individually designed presentation version. Thanks to the modular construction, there are no limits in how to present the new racks. Powder coated without panel Powder coated with panel SMALL Powder coated with panel SUPERIOR Powder coated with panel TOP Individual combinations MONTANA abs racks are available in various lengths: 50 cm 1 00 cm 2 46 cm 2 00 cm 3 All racks with tracking system of the same type can be chained up with each other up to a total length of 600 cm. Freestanding racks can be combined in unlimited quantities. 5 boot ra c k / H E L M E T R A C K The versatile helmet rack The versatile boot rack The height of the shelves can be adjusted and they can be reversed, so providing the most efficient space for storing ski shoes, cross country ski shoes, snowboarding shoes, helmets, snowboard bindings, and much more. MIX RACK (BOOT/HELMET) powder-coated, with tray and screen as SUPERIOR CAPACITIES DIMENSIONS Width: 50 cm Height: 223 cm (246 cm) CAPACITIES HELMETS The capacity indication ist based on adult boots in size 27.5 Height 217 cm* Height 217 cm 150 cm 78 pieces 150 cm 60 pairs 200 cm 104 pieces 200 cm 80 pairs 240 cm 130 pieces 240 cm 100 pairs 300 cm 169 pieces 300 cm 120 pairs Height 246 cm** Height 246 cm 90 pieces 150 cm 66*-72** pairs 200 cm 120 pieces 200 cm 88*-96** pairs 240 cm 150 pieces 240 cm 110*-120** pairs 300 cm 195 pieces 300 cm 132*-144** pairs *) on 13 rack bottoms * with one additional shelf ** with two additional shelfs 6 150 cm **) on 15 rack bottoms boot d ryer S P E E D Fan-powered automatic-dryer for ski, snowboard and cross-country boots Optional Drip tray for depot area The high air-flow reduces the (pluggable) time of drying to an absolute minimum. The heat and ventilation aggregates are programmable and you can use either warm air or room temperature air. Thanks to Efficient ionisation the option of having an Directly in the air supply integrated automatic air stop for each ionisation module prevents very drying position, you can save effectively the building of bad odors. energy and use the warm air exactly where you need it. Option stop valve Each drying unit is equipped with a stop valve. This means that only when in use the drying units will be provided BOOT DRYER SPEED with with hot air. SUPERIOR cover and drip tray CAPACITIES BOOT DRYER SPEED TECHNICAL SPECIFCATIONS Height 217 cm Power consumption BOOT DRYER SPEED BOOT RACK / DRYER 150 cm 40 Paar / 240 pairs* Heating: 4.500 watt 200 cm 60 Paar / 360 pairs* Ventilation: 240 watt 240 cm 70 Paar / 420 pairs* Ventilation performance: 300 cm 80 Paar / 480 pairs* Voltage Height 240 cm ca. 550 m3/h / ca. 630 m3/h* Europe: 1 x 230 V** / 3 x 400 Volt / 50 Hz / 7 A / 16 A 150 cm 44 Paar / 264 pairs* Norway: 3 x 230 Volt / 50 Hz / 7 A 200 cm 66 Paar / 396 pairs* USA: 240 Volt / 60 Hz / 19 A 240 cm 77 Paar / 462 pairs* Japan: 300 cm 88 Paar / 528 pairs* Dimensions Width: *Performance each day/24 hours For boots that are wet to a normal degree, where humidity is between 40 and 60%. Duration: 4h/each pair Height: 3 x 200 Volt / 50/60 Hz / 8 A 60 cm 50 cm 223 cm (246 cm) * with 300 cm minimal heat output **minimal heat output 7 B O OT R A C K D R Y E R Boot rack with fan-powered dryer HELMET RACK DRYER Helmet shelf with air blower drying This rack combines the advantages of a conventional Boot Rack with the one of the fully automatic dryer. BOOT RACK / DRYER has an efficient, free programmable heating and air BOOT RACK DRYER ventilation aggregate with a switch powder coated with function for room ventilation or heating drip tray and SUPERIOR panel operation (identical with aggregate BOOT DRYER SPEED). The shelves are adjustable in a 5cm grid. NEW: Adjustable shelves Rack shelves with drying function Air flows from the ventilation channels on the lower side of the rack shelves. Heating and aeration aggregate CAPACITIES HELMET RACK DRYER Height 223 cm Height 223 cm 150 cm 50 pairs 150 cm 72-*78** helmets 200 cm 65 pairs 200 cm 96*-104** helmets 240 cm 80 pairs 240 cm 120*-130** helmets 300 cm 100 pairs 300 cm 144*-169** helmets The heating and areation aggregate Height 246 cm is located on the top 150 cm 55 pairs 150 cm 84*-90** helmets Aeration can be changed from air venti- 200 cm 72 pairs 200 cm 112*-120** helmets 240 cm 88 pairs 240 cm 140*-150** helmets 300 cm 110 pairs 300 cm 182*-195** helmets lation to room temperature or heating Free programmable With indicator of humidity 4 years guarantee 8 CAPACITIES BOOT RACK / DRYER* Height 246 cm *) The capacity indication ist based on adult boots in size 27.5 * men helmets / ** women helmets B O OT D R Y E R WA LL Boot dryer with ventilation or electrical heating system Our boot dryers for the professional use are functional and, except the ionisation, absolutely maintenance free. The shape of the drying arms prevents tilting of the boots and enables an efficient drying all the way to the tip of the boot. The heating elements and ventilations are equipped with a temperature protection. Our boot dryers are available in various sizes (2 – 20 pairs) and also can include a water connection. Please ask for detailed information. Efficient ionisation Directly in the air supply integrated ionisation module prevents very effectively the building of bad odors. (option for fan-powered dryers) Speed Dry wall-mounted, fan- Eco Dry wall-mounted electric powered dryer (385 m /h). Also dryer. Also available with stand. 3 available with stand. TECHNICAL SPECIFCATIONS SPEED DRY Capacities: ECO DRY 10 pairs 20 pairs 10 pairs 20 pairs 60 cm 120 cm 60 cm 120 cm Dimensions: Width: Lockable timer (programmable weekly) Air control with turning valves (fan-powered dryer) Height: 183 cm Depth: 50 cm 40 cm 1.650 watt 160 watt Rated power: 190 cm 320 watt Additional dryers for 4, 8, 10 and 16 pairs on request Drying via water connection (central heating) on request 9 NEUTRALIZER Disinfection system for all types of boots and helmets Disinfection system for all types of Optimal spraying method boots and helmets. With this easy to An even distribution of the disinfectant use unit you can easily disinfect your within the boots and helmets is gua- rental boots and helmets in an effici- ranteed by 3 nozzles. Optionally you can ent way. Made of stainless steel. purchase a table that allows you to work in perfect working height and gives you additional storage space. TECHNICAL SPECIFCATIONS Electric installations Voltage: 100-240 volt / 4.3 A – 47-63 Hz Dimensions Width: 40 cm Height (without table): 64 cm Depth: 65 cm Weight: 29 kg Spray Time: 6 sec (set value) io n iSatio n apparatu s The efficient solution for air cleaning and removal of bad odor Air processing Odor neutralisation Air germinating MONTANA ionisation units are pro- An efficient ionisation neutralizes The MONTANA ionisation unit destroys ducing a healthy fresh air climate unpleasant smells thanks to an all air germs, mushrooms and bacteria. which is motivating people. The effective micro oxidation. concentration and production ability will be increased. TECHNICAL SPECIFCATIONS High performance Electric installations One MONTANA ionisation unit (mod. Voltage: 7-D-1i) can purify a room up to a size Rated power: of around 320 m3 per hour. For bigger Dimensions rooms several units can be used. Width: 60 cm Height: 24 cm Depth: 14 cm Weight: 28 kg Ionisation unit also available with wall mounting kit 10 230 volt / 50 Hz 35 watt, 320 m3/h 11 s wi n g c arver SWINGCARVER Storage and presentation powder coated with drip tray and SUPERIOR panel The Swingcarver is the best way of storage for carving, fat and cross country skis. In an angle of 40° the skis will be perfectly presented. Options with additional equipment Rack bottoms Easy hang Flip Clip SWINGCARVER with carriage on wheels Swingcarver holding system Cross bar with pole holders Shelves The bows hold the skis safe and with To be used with high columns In conjunction with high columns care. The easy to use mechanism saves time when skis come in and go out. CAPACITIES DIMENSIONS Width: 50 cm Height: 146 cm (223/246 cm) Standard Wide Body Ski Receptacle width: 10.5 cm Receptacle width: 15 cm 100 cm* 12 pairs of ski 10 pairs of ski 150 cm 20 pairs of ski 16 pairs of ski 200 cm 28 pairs of ski 22 pairs of ski 240 cm 34 pairs of ski 28 pairs of ski 300 cm 40 pairs of ski 32 pairs of ski *Rack only with under carriage on wheels 12 BUTLER 1 BUTLER 2 Transport rack with additional helmet rack Transport rack on swivelling wheels DIMENSIONS DIMENSIONS Width: 50 cm Width: 70 cm Length: 100 cm Length: 130 cm Depth: 150 cm Depth: 160 cm CAPACITIES CAPACITIES 6 pairs of ski (or 4 Snowboards) and 6 pairs of shoes. 6 pairs of skis (or 4 snowboards) 6 pairs of shoes Optional: 6 helmets, 6 pairs of gloves and 6 glassesBrillen Transport rack on swivelling wheels. Spacey rack for 6 ski equipments. Including basket for small items. Transport- and collecting rack with road casters, offers space for the complete ski equipment of 6 people, with integrated pole holders. s ervi c e ra c k Workshop trolly For approx. 30 pairs of skis. Drip tray with drain hose. Including rubber mat. Undercarriage with 4 casters, 2 with brakes. DIMENSIONS Width: 120 cm Height: 147 cm Depth: 80 cm CAPACITIES approx. 30 pairs of ski 13 u n iver s a l The universal storage system UNIVERSAL UNIVERSAL powder heigth 240 cm, 2 floors, powder coated with panel coated with panel TOP SUPERIOR UNIVERSAL on wheels In this system, a great number of back passes in rental operation and in variable ski types and boards can be service workshops. Option Boot shelf Easy hang stored in a minimum space. UNIVERSAL can be used for alpine, carving, cross The inclined lover metal sheel and the Flip Clip country skis and snowboards. This upper bars can easily be height adju- Undercarriage with swivelling wheels storage system is easy to handle and sted. That means that shorter sport gear enables a fast and easy loading and such as children skis can also be stored. unloading. The ideal solution for ski DIMENSIONS Width: 45 cm Height: 146 cm (223/246 cm) CAPACITIES* 100 cm1 approx. 16 pairs of ski 150 cm approx. 24 pairs of ski 200 cm approx. 34 pairs of ski 240 cm approx. 42 pairs of ski 300 cm approx. 50 pairs of ski 2 UNIVERSAL is adjustable in width and heigth * Rack only with under carriage wheels *) At an average ski width of 115 mm 1 ) Rack only with under carriage on wheels 2 ) Capacity cross-country skis approx. 78 pairs 14 u n iver s a l Wa l l The space saving wall rack UNIVERSAL WALL is made of powder coated steel sheet. It is bolted to the wall and has room for all kind of skis or boards. UNIVERSAL WALL is perfect for outdoor and indoor use. DIMENSIONS Width: 24.5 cm Height: 143 cm CAPACITIES* UNIVERSAL WALL 100 cm approx. 8 pairs of ski 150 cm approx. 12 pairs of ski * at an average ski width of 115 mm can be extended with extension elements pre s e n tatio n ra c k Presentation rack for ski and snowboards This rack is great for shop, DIMENSIONS rent and depot. Width: 88 cm Height: 123 cm Depth: 48 cm Thanks to the various possibilities, these racks can be used as a guide system. CAPACITIES 8 pairs of ski or 3 snowboards or 9 pairs of children ski 15 ea s y h a n g Also available for wall mounting: The versatile hanging system for all ski types EASY HANG powder coated with drip tray and panel SUPERIOR, height 246 cm. Equipped with 1 Vario cross bar. The module system gives the possibility to store any kind of skis and snowboards on minimum space. Thanks to the individually adjustable supports, also children skis, snowblades and fun boards can be stored clearly arranged in a space saving way. Versions with 3 levels DIMENSIONS Width: Height: CAPACITIES* 80 cm 223 cm (246 cm) Adults 1 Children 2 150 cm 54 pairs Ski 144 pairs Ski 200 cm 72 pairs Ski 192 pairs Ski 240 cm 84 pairs Ski 224 pairs Ski 300 cm 108 pairs Ski 288 pairs Ski *) Stepped hanging with additional equipment and highth 240 cm 1 ) 3 pairs of ski per position 2 ) 4 pairs of ski per position Versions with 4 levels (the supports must be raised on these versions) DIMENSIONS Width: Height: CAPACITIES* 80 cm 223 cm (246 cm) Adults 1 Children 2 150 cm 36 - 72 pairs Ski 96 - 192 pairs Ski 200 cm 54 - 108 pairs Ski 132 - 264 pairs Ski 240 cm 63 - 126 pairs Ski 156 - 312 pairs Ski 300 cm 78 - 156 pairs Ski 192 - 384 pairs Ski *) Stepped hanging with additional equipment and highth 240 cm 1 ) 3 pairs of ski per position 2 ) 4 pairs of ski per position Versions wall mounting DIMENSIONS CAPACITIES 1 - row 5 - rows (4-pole) 16 Adults Children 100 cm 12 pairs Ski 16 pairs Ski 150 cm 18 pairs Ski 24 pairs Ski 100 cm min. 12 pairs Ski 16 pairs Ski 150 cm min. 18 pairs Ski 24 pairs Ski Variable way of hanging 4-point hanging system on 2 bars 4-point hanging system on 2 bars Drip trays wit rubber mat For a most efficient use of the capacities Individually adjustable in height. made of sendzimir galvanized, powder for skis and snowboards. coated steel to hold the mealted water. are part of the delivery Suspension with split pin 6-row bar with suspension 6-row bar with suspension Individually, fast and easy adjusting of Storage for all actual ski models Optimized hole arrangement for a full the suspensions without tools. (incl. skis with special top construc- capacity. and skis with special surfaces. tions) thanks to the perforated hole system is possible. 17 s n owboar d The variable snowboard rack MIX RACK SNOWBOARD powder coated with basket for bindings and additional shelves On the adjustable holders, snowboards with and without mounted bindings can be stored. Also available for wall mounting: CAPACITIES Stoppers Wall mounting Easy to use stoppers keep the 100 cm 8 Snowboards 150 cm 11 Snowboards snowboards safely in position. DIMENSIONS Width: 70 cm Height: 223 cm (246 cm) CAPACITIES with (soft-) bindings* 150 cm 16 snowboards 200 cm 28 snowboards 240 cm 34 snowboards 300 cm 40 snowboards without bindings** 150 cm 68 snowboards 200 cm 90 snowboards 240 cm 106 snowboards 300 cm 136 snowboards * standard assembly ** with additional brackets 18 po l e ra c k Also available for wall mounting: CAPACITIES The flexible storage of ski and cross country poles Wall mounting 100 cm 120 pairs These pole racks with height adjustable holders can be used to store short sport units e.g. children skis, snow blades or fun carver. POLE RACK powder coated with drip tray and panel SUPERIOR, height 246 cm. Equipped with 1 serial standard cross bar and 1 optional Vario cross bar POLE RACK WALL powder DIMENSIONS POLE RACK POLE RACK WALL Width: 80 cm 80 cm Height: 223 cm (246 cm) 240 cm CAPACITIES coated, height 240 cm. Equipped with 1 standard and 1 Vario cross bar. POLE RACK POLE RACK WALL Height 223 cm (1 floor) Height 246 cm (2 floors) 100 cm − − 100 pairs 150 cm 180 pairs 360 pairs 360 pairs 200 cm 240 pairs 480 pairs − 240 cm 288 pairs 576 pairs − 240 cm 360 pairs 720 pairs − 19 FL I P CL I P c ro s s bar s The great storage system In FLIP CLIP you can store basically any winter sport gear. It is presented in an angle of 40°. The items are held secure and are easy and fast to use. FLIP CLIP cross bars can be added to any abs rack. CAPACITIES (per cross bars) Flip Clip cross bars combined 100 cm 14 pairs 150 cm 22 pairs 200 cm 30 pairs 240 cm 36 pairs with UNIVERSAL, height 246 cm. FLIP CLIP cross bars can be added to any abs rack F l ip CLIP wa l l M OU NTI NG SYSTEM For an easy storage of ski and snowboards FLIP CLIP elements are available in 3 units (Trio) incl. 50 cm of mounting rail straight or with 40° version and are 5 units (Quintett) incl. 80 cm of available as follows: mounting rail Single elements (quantity to be Mounting rails in the length of selected) 100 and 200 cm FLIP CLIP Trio straight version FLIP CLIP 40° on rail FLIP CLIP straight on rail 7 piece per meter 5 piece per meter 20 with rail, wall mounted A CC E SS O R I E S Equipment options and accessories increase the use of your rack. Undercarriage with Track profile made of swivelling wheels Niro-steel Track system Rack Stop bolt-on stopping device for steel track Rail connector, made of End stopper made of Sendzimir galvanized Cross bar with eybolts stainless steel stainless steel additional cross bar. To lock-up skis with a cable-lock Cross bar for clothing Bicycle Hook for abs Bicycle Hook including plate Rubber hoses for the EASY HANG can easily be cross bar for FLIP CLIP mounting rail upper holding bar for euqipped with a cross bar UNIVERSAL racks prevent for clothing. the sliding of the gear 21 Installations As competent partners of rental operations and shops, we offer a complete line of installation units. Of course, all our furniture is available in individual colors and all have integrated cable channels. 22 s e l f termi n a l Elegant and solid desk for the self service check-in High desk with touch screen monitor and web cam. Lockable PC and printer case. DIMENSIONS DESK Width: 40.5 cm Height: 102.5 cm Depth: 46.0 cm Weight: approx. 25 kg 23 S I T T I N G B E NCH On this solid, free standing furniture, the customer sits at the ergonomically correct height. 24 ADJUSTING TABLES A n d CASHIER DESKS Individual construction possibilities Adjusting table Adjusting table COMPACT DIMENSIONS ADJUSTING TABLE Practical furniture in solid construction and modern design. Thanks to height DIMENSIONS ADJUSTING TABLE Width: 150 cm adjustable support and the adjustment Width: 90/115 cm Height: adjustable positions for left and right handed Height: 75 cm Depth: 73 cm people, efficient work is possible at Depth: 60 cm these tables. On request the tables are available with adjustable height and turntable holders for the PC terminals. Cashier desk 25 New d u cs tki2s0a 1 3f/e2 0 1 4 Compro f ort The future depot system The latest electronical ski depot rack with high comfort for the user for all ski types (10 - 140mm in the binding area) and ski poles with a new unique easy to use sliding mechanism. The very robust system is immune against theft and vandalism. System is available with rail system, on rolls or as stand alone rack. Easy to use touch panel with Gantner electronics. Dimensions 1500x500x1590mm 18 pairs ski incl. poles- 2000x500x1590mm 24 pairs ski incl. poles 2400x500x1590mm 30 pairs ski incl. poles 2400x500x1590mm 38 pairs ski incl. poles Ski widths: 10-140mm in the binding area, i.e. for all skis, Rocker and fat skis or CC skis. Technical features Electric system Power: 26 230 Volt 27 D E P OT LO C K E R S With Steurer ski lockers you will be on the safe side Perforated helmet holder, drying arms NEW 2014/2015 and water-deflector Gantner Net.Lock System Advantages improved reading point range for all ISO cards web-based interface with graphic display for Android or Mac new and improved anti-theft safeguard and better alarm energy-saving function easy-to-use system operated directly from the locker door We also offer a great selection of locking systems, from a simple cylinder lock up to an online controlled electronic locking system, For 4 people anything is possible. Robust, extreme solid lockers made of The optional electric dryers which are galvanized and powder coated metal built in the lockers are protected against sheet. Brazing guarantees additional overheating and are absolutely stability. The doors can be opened at 90° maintenance free. Our depot lockers and are produced with broad base for are available in various styles for 2 up best aeration. The doors are made to 5 persons. Please contact us! of steel, also other materials in various colors and patterns are available. The steel doors from the assembly line can be perforated with your logo. The Lockers available in individual lockers can easily be connected to an colors to match your design external aeration system. 28 NEW 2014/2015 Optional: double layered door with height 2400 MM Connection for external aeration system Drying arms for boots and gloves Hidden, sturdy, welded steel Perforated floor with water panel hinges combined with permeable rubber mat GRP pins and an integrated restrictor when opening the locker door make this product a high quality item while contributing greatly towards making the product last longer. Galvanized and painted frames with height-adjustable stands TECHNICAL SPECIFCATIONS TYP C2 TYP C5 TYP E2 TYP E5 TYP S2 TYP S2 350 TYP S4 Width: 30 cm 60 cm 60 cm 90 cm 30 cm 35 cm 60 cm Height: 215 cm 215 cm 215 cm 215 cm 215 cm 215 cm 215 cm Depth: 56 cm 56 cm 56 cm 56 cm 56 cm 56 cm 56 cm Rated power: 45 watt 90 watt 45 watt 90 watt 45 watt 45 Watt 90 watt Dimensions CAPACITIES TYPE C2 for 2 people (2 pairs of skis + poles + boots) TYPE C5 for 5 people (5 pairs of skis + poles + boots) TYPE E2 for 2 people (2 pairs of skis + poles + boots + garment compartment) TYPE E5 for 5 people (5 pairs of skis + poles + boots + garment compartment) TYPE S2 for 2 people (2 pairs of skis + poles + boots + garment compartment + glove dryer) TYPE S2_350 for 2 people (2 pairs of skis + poles + boots + garment compartment + glove dryer) TYPE S4 for 4 people (4 pairs of skis + poles + boots + garment compartment + glove dryer) Please ask for other combinations 29 B O OT R A C K A I R D E P OT Depot locker with integrated dryer for ski and snowboard boots The depot system which can be adapted to any space and quantity requirements of the customer. Each shelve can individually be produced according to the customers request and is available as a freestanding model or on rails. Each compartment has an aluminium rolling door and can be equipped with a key locking system. BOOT RACK AIR DEPOT has an efficient, free programmable heat and aeration system with modification functions for room temperature or heating operation (identi- BOOT RACK AIR DEPOT cal with the aggregate of a BOOT DRYER). with panel SUPERIOR Heating and aeration aggregate The heating and aeration aggregate is located on the top CAPACITIES Variable, depending on version Aeration can be changed from air ventilation to room temperature or heating Free programmable With indicator of humidity TECHNICAL SPECIFCATIONS Electric installations Power consumption Ventilation: 240 watt Heating: 4.500 watt Voltage Efficient ionisation (optional) Directly in the air supply integrated ionisation module prevents very effectively the building of bad odors. 30 Europe: 3 x 400 volt / 50 Hz / 7 A Norway: 3 x 230 volt / 50 Hz / 7 A USA: 240 volt / 60 Hz / 19 A Japan: 3 x 200 volt / 50 Hz / 8 A Dimensions Width: 80 cm Height: 217 cm U N I V E R S A L D E P OT / SN O W B OA R D D E P OT The depot for skis and poles UNIVERSAL DEPOT powder SNOWBOARD DEPOT powder coated with panel SMALL coated with drip tray and Drip tray and SUPERIOR panel In UNIVERSAL DEPOT you can store all The upper shelve cross bar can be versions of ski models and poles. The equipped with a lock system. Each rack is easy to handle and can be rack will be produced according to the adjusted in height. Snowboard customer’s request and is available as DEPOT is the solution for the storage freestanding model or on rails. of snowboards. It is easy to use and the height adjuLockable stable holding system makes a straightforward handling possible. DIMENSIONS UNIVERSAL DEPOT SNOWBOARD DEPOT Width: 70 cm 70 cm Height: 141 cm 141 cm CAPACITIES UNIVERSAL DEPOT SNOWBOARD DEPOT Version Variable, depending on version Pole holder 31 32 PERFECT DESIGN 33 33 MONTANA SPORT INTERNATIONAL AG Mühlebachstrasse 3 · CH-6370 Stans Phone +41 (0) 41 619 16 62 · Fax +41 (0) 41 610 80 67 e-mail: info @ montana-international.com · www.montana-international.com MONTANA SPORT North America Inc. 8 Federal Way · Groveland · MA 01834 Phone +1 978-420-1700 · Toll Free 888-667-0153 · Fax +1 978-420-1701 e-mail: bcadmus @ montanasportna.com · www.montanasportna.com