COVINGTONS CYCLE CITY When the

SEPTEMBER 2013
COVINGTONS CYCLE CITY
When the Covingtons aren’t designing,
testing and building new products, you
will likely find them out on the road
riding in style and promoting their
latest products like their new Destroyer
exhaust you see below. We believe this
powerful 2-into-1 system will be as
popular as the Covingtons DiamondEdge accessories that your customers
ask for by name. Get a set of these on
a Bagger and let your customers see
and hear this latest offering.
1800-1603
1800-1602
DESTROYER 2-INTO-1 EXHAUST
•Feature stepped 13/4” to 17/8” to 21/8” headpipes
•3” diameter collector with removable baffle
•12mm and 18mm O2 sensor ports installed to accept sensors for any year application
•O2 sensor plugs included for non-sensor applications
•Can be used with passenger floorboards
•Include necessary mounting hardware and heat shields
•Made in the U.S.A.
PART #
DESCRIPTION
FOR 95-13 FLT, FLHT, FLHR, FLTR, FLHX
1800-1602
Chrome
SUG. RETAIL
$1,195.95
PART #
DESCRIPTION
FOR 95-13 FLT, FLHT, FLHR, FLTR, FLHX (CONT)
1800-1603
Black ceramic
SUG. RETAIL
$1,295.95
The California Air Resources Board (“CARB”) does not permit the use of aftermarket exhaust systems that remove or alter
OEM emission control devices unless certified by CARB, other than on racing vehicles on closed courses. Check your local
laws and manufacturer’s information.
STAINLESS
HI-OUTPUT
2-INTO-1
•Engineered for
high output engine
modifications
•Dyno developed
and tested to increase
volumetric efficiency
critical to extracting maximum
horsepower from high output engine modifications
•13/4” to 2” tapered headpipes with 21/2” inlet to megaphone and 4” to
41/2” stepped muffler body
•3” to 31/4” baffle with anti-reversion cone
•All stainless steel construction with TIG welding and race-inspired
brushed stainless “Works” finish
•Contoured laser-cut heat shields
•Flat plane 12mm and quick access 18mm oxygen sensor ports for
wideband tuning capability
•Made in the U.S.A.
PART #
DESCRIPTION
1800-1589
For 99-08 FLHT, FLHR, FLHX, FLTR models
SUG. RETAIL
$999.95
4”
MONSTER
ROUND
SLIP-ON
MUFFLERS
•4” Monster
Rounds offer
the same
perfection and
performances as the Monster Ovals
•Feature a matte black finish with striking billet end caps
•Stereo-friendly, Monster Mufflers yield a deep rich tone that’s perfect for
those cross-country tours
•Encased in full-coverage one-piece formed heat shields with machined
end caps in chrome, riders will be proud to show off their pipes wherever
the road takes them
•Sold in pairs
•Made in the U.S.A.
PART #
DESCRIPTION
1801-0650
For 95-13 FLT/FLHT/FLHX/FLHR/FLTR models
BIG RADIUS
DESCRIPTION
1800-1582
For 13 FXSB/SE
$799.95
1800-1600
•Big 21/2” full header
and muffler heat
shield system is
virtually blue-proof
•Chrome pipes feature scalloped tips for a unique look
•Removable baffles and mounting hardware included
•Flat plane mounting panel for the 12mm oxygen sensors positions
sensors deeper into exhaust stream, providing enhanced data feedback
to the ECM
•Made in the U.S.A.
PART #
SUG. RETAIL
SUG. RETAIL
$704.95
1800-1601
PRO-STREET
TURN-OUT SYSTEMS
STAINLESS STEEL
MUFFLER CLAMPS
•Feature 16-gauge steel construction throughout
•13/4” headpipes step to 2”, then flow into 21/2” muffler
bodies for increased flow and improved performance
•Designed to increase low-end torque and produce a deep, throaty
exhaust note
•Include heat shields, mounting brackets and hardware
•Available with chrome or black finish
•Made in the U.S.A.
•Feature a 1.25” wide stainless band with an
exclusive reaction block for 360° clamping
without muffler or header distortion
•High-strength fastener hardware with corrosion-resistant
coating included
•Replace 1” W OEM muffler clamps; fit mufflers with 1.75” i.d. inlets
•Sold in pairs
•Made in the U.S.A.
PART #
DESCRIPTION
1860-0667
Stainless steel muffler clamps;
repl. OEM #65296-95A
NOTE: Baffles for turn-out systems are welded in place.
SUG. RETAIL
$15.95
PART #
DESCRIPTION
For 08-11 FXCW/C, 2013 FXSB/SE
1800-1600
1800-1601
Chrome
Black
SUG. RETAIL
$599.95
639.95
The California Air Resources Board (“CARB”) does not permit the use of aftermarket exhaust systems that remove or alter
OEM emission control devices unless certified by CARB, other than on racing vehicles on closed courses. Check your local
laws and manufacturer’s information.
2
SCORPION LOW-PROFILE LOCK-UP CLUTCHES
•Feature an all-new, redesigned billet aluminum lock-up pressure plate designed to
fit under the stock primary cover
•No need to change or modify your cover
•Surface area is greatly increased and lever effort is kept to a minimum
•Three different coil spring sets included to provide a wide variety of spring
pressure options allowing you to tune the clutch for stock to 200+ HP applications
•A steel inner hub is also included to complete the unit
•Designed to fit into the stock-type basket
•Billet aluminum pressure plate
•Adjustable pressure arms increase spring pressure as rpm increase
•Can be run wet or dry
•Smooth, precise shifting
•Sets of replacement fiber and steel clutch plates available separately
•Made in the U.S.A.
SCORPION
REPL. CLUTCH
PLATE SET
DESCRIPTION
CLUTCH
SUG. RETAIL
For 11-13 Big Twin and 13 CVO models w/ mechanical clutch
For 11-13 FLHRSSE, FLHTCUSE, FLSTSE, FLTRUSE, FLTRXSE, FLXHSE, FXSBSE
and other 13 CVO models w/ hydraulic clutch
For 07-10 Big Twin and 06 Dyna Glide
For 07-10 FLSTFSE, FXSTSSE, FXDSE, FLHRSE (hydraulic clutch)
For 98-06 Big Twin w/ mechanical clutch (except 06 Dyna Glide)
For 98-06 Big Twin w/ hydraulic clutch (except 06 Dyna Glide)
1130-0206
$837.95
1131-2446
$204.95
1130-0210
1130-0207
1130-0211
1130-0208
1130-0212
837.95
837.95
837.95
837.95
837.95
1131-2446
1131-2446
1131-2446
1131-2446
1131-2446
204.95
204.95
204.95
204.95
204.95
1130-0205
SUG. RETAIL
1130-0209
SCORPION BILLET CLUTCHES
•CNC-machined billet aluminum design features over twice the friction area of the stock clutch
•Provide positive engagement and release
•Incorporate six heavy-duty coil springs instead of the diaphragm spring; include an extra heavy-duty set of springs for higher
horsepower applications
•Friction plates are compatible with most primary oil
•Simple bolt-on installation; requires the original clutch shell; no machining is necessary
•Kits include clutch hub, drive plates, driven plates, (two) sets of clutch springs, pressure plate and necessary hardware
•Made in the U.S.A.
DESCRIPTION
For 11-13 Big Twin and 13 CVO models w/ mechanical clutch
For 11-13 FLHRSSE, FLHTCUSE, FLSTSE, FLTRUSE, FLTRXSE, FLXHSE, FXSBSE
and other 13 CVO models w/ hydraulic clutch
SCORPION
CLUTCH
SUG.
RETAIL
REPL. CLUTCH
PLATE SET
SUG.
RETAIL
1130-0205
$549.95
1131-2446
$204.95
1130-0209
549.95
1131-2446
204.95
SCORPION LOWPROFILE LOCK-UP
PRESSURE PLATES
•New low-profile design fits under
stock primary cover
•Direct bolt-on design retro-fits to
existing Scorpion billet clutches
•Progressively increases pressure
as rpm increase
•CNC-machined, 6061 T-6 billet aluminum
•Perfect for large-displacement, high-horsepower motors
•Made in the U.S.A.
PART #
DESCRIPTION
1131-2447
1131-2448
For 98-13 Big Twin w/ existing mechanical Scorpion clutch
For 98-13 Big Twin w/ existing hydraulic Scorpion clutch
CLUTCH
PLATE KIT
•Consists of nine Kevlar® friction plates, eight steel plates
and a set of three heavy-duty springs
•Made in the U.S.A.
SUG. RETAIL
$487.95
487.95
PART #
DESCRIPTION
1131-2445
For 13 Big Twin
CVO/SE models
SUG. RETAIL
$176.95
3
LYNDALL RACING BRAKES
Another family-owned and operated American
manufacturer, Lyndall prides itself in the production of premiumquality brake components for the V-Twin market segment. Their goal
to continually improve and update their products to provide riders with
the latest breakthrough technologies available for safe and effective
stopping power is reflected in the new pads and rotors you see here. As
they say at Lyndall “…You’ve got a lot riding on your brakes.”
1710-2151
1710-2152
LUG-DRIVE BRAKE ROTORS
1710-2147
1710-2148
•These high-performance rotors use an ultra-light friction ring CNCmachined from an aluminum-ceramic composite material
•The Lug Drive System is used to fit the ring flush with a 6061 T-6 billet
aluminum carrier
•The assembly locks together with a 302 stainless spiral retaining clip in
the back, giving the clean, uninterrupted look of a solid rotor with the
performance expected from a high-performance fully floating rotor by
Lyndall Brakes
•When used with LRB’s Red or Gold Plus brake pads, it provides the longest service life, and runs cleaner and quieter than any other braking system
•The entire rotor weighs 1.6 lb.
•Phoenix 8 Spoke rotors complement the stock wheel pattern commonly found on Dyna and FXR models
•Made in the U.S.A.
FRONT
PART #
DESCRIPTION
SUG. RETAIL
FOR 00-13 MODELS (EXCEPT 08-13 FLHT/FLHR/FLHX/FLTR, H-D FL TRIKE,
V-ROD, SPRINGERS, 06-13 DYNA GLIDE) (11.5” DIA.)
REAR
PART #
DESCRIPTION
SUG. RETAIL
FOR 00-13 MODELS (EXCEPT 08-13 FLHT/FLHR/FLHX/FLTR, H-D FL TRIKE,
V-ROD, SPRINGERS) (11.5” DIA.)
FOR 08-13 FLHT, FLHR, FLHX, FLTR MODELS, H-D FL TRIKE MODELS,
06-13 DYNA MODELS (11.8” DIA.)
FOR 08-13 FLHT, FLHR, FLHX, FLTR MODELS (EXC. H-D FL TRIKE) (11.8” DIA.)
1710-2151
1710-2152
Phoenix 8 Spoke, black
Phoenix 8 Spoke, chrome
$469.95
469.95
1710-2153
1710-2154
Phoenix 8 Spoke, black
Phoenix 8 Spoke, chrome
469.95
469.95
1710-2147
1710-2148
Agitator, black
Agitator, chrome
469.95
469.95
FOR 09-13 FLHT, FLHR, FLHX, FLTR SCREAMIN’ EAGLE MODELS
W/ SCREAMIN’ EAGLE AGITATOR WHEELS (300mm DIA.)
DESCRIPTION
For 09-13 H-D FL Trikes;
repl. OEM 83911-09B
4
$469.95
469.95
1710-2157
1710-2158
Phoenix 8 Spoke, black
Phoenix 8 Spoke, chrome
469.95
469.95
1710-2149
1710-2150
Agitator, black
Agitator, chrome
469.95
469.95
FOR 09-13 FLHT, FLHR, FLHX, FLTR SCREAMIN’ EAGLE MODELS
W/ SCREAMIN’ EAGLE AGITATOR WHEELS (300mm DIA.)
•For use on all BDL open belt drive kits
•Choose the appropriate side of the tool for your kit;
one side is for open belt drives up to 06 models and
the smaller, reverse side is for open
PART #
DESCRIPTION
SUG. RETAIL
belt drive kits for 07-13 models
3801-0240 Ring gear lock tool
$30.95
•Made in the U.S.A.
•LRB’s latest advancement in highperformance friction materials
•Proprietary blend of organics and trace
iron requires no break-in
•Offers extreme stopping power in both
wet and dry conditions
•Dust and rotor wear are eliminated
•Sold in a set of two pair
•Made in the U.S.A.
1720-0258
Phoenix 8 Spoke, black
Phoenix 8 Spoke, chrome
RING GEAR LOCK TOOL
GOLD PLUS
REAR BRAKE PADS
PART #
1710-2155
1710-2156
CLUTCH LOCK-UP TOOL
SUG. RETAIL
$134.95
•For use on all BDL belt drive units that have the BDL
round clutch dogs
•Designed to help properly torque the clutch basket
and hub assembly to the mainshaft of the transmission
•No need to use an impact wrench that
can damage the basket, hub or
PART #
DESCRIPTION
SUG. RETAIL
other components
3803-0114 Clutch lock-up tool
$15.95
•Made in the U.S.A.
REVO SHOCK ABSORBERS
•All-new REVO coil suspension uses Legend’s Touring spring rates to
produce superior ride quality and performance designed specifically
for Touring models
•REVO coils provide improved plush ride quality, control, and
resistance to bottoming out
•REVO extended coil length has a larger “sweet spot” without
increasing the overall shock length
•REVO unique spring rate offers ability to soften preload and/or
reduce ride height while maintaining a smooth ride
•Requires minimal preload adjustments when changing between
rider weight or total motorcycle load
•All suspension adjustments can be done by hand, no tools required
•Easy installation and alignment is provided by spherical bearings on
top and bottom
•Available in 12” and 13” shock lengths in standard or heavy-duty
•Black shock bodies with black springs
•All REVO shocks are assembled by hand
•Sold in pairs
•Made in the U.S.A.
NOTE: Heavy-duty shock applications are recommended for 400 lb.+ rider and passenger total weight.
FOR 00-13 FLHT, FLHR, FLTR AND LO-PRO EQUIPPED MODELS (EXCEPT H-D FL TRIKE, FLHRSE)
PART #
DESCRIPTION
SUG. RETAIL PART #
HEAVY-DUTY
STANDARD
1310-0936
1310-0937
12” L
13” L
$699.95
699.95
1310-0938
1310-0939
DESCRIPTION
SUG. RETAIL
12” L
13” L
$724.95
724.95
LED BACKLIT FAIRING-MOUNTED AIR PRESSURE GAUGE
•Made from 6061 billet aluminum
•Black or white face gauge with Legend logo
•0-150 psi full sweep air pressure gauge
•Push-to-connect fitting
•Mount in the fairing on FLHT/FLHX and FLTR models
•Made in the U.S.A.
2212-0484
PART #
DESCRIPTION
SUG. RETAIL
2212-0484
W/ black face
$179.95
2212-0485
PART #
DESCRIPTION
SUG. RETAIL
2212-0485
W/ white face
$179.95
CUSTOM FRONT FENDER FOR 26” WHEELS
•Heavy-gauge 16-gauge steel construction
•Individually inspected to ensure straightness, consistency and a flawless
finish with an absolute minimum of finishing bodywork
•Comes predrilled for easy installation
•Require spacers
•Handmade in the U.S.A.
PART #
DESCRIPTION
1401-0373
For 94-13 FLT, FLHT, FLHR, FLTR,
H-D FL Trike models
SUG. RETAIL
$369.95
5
LOWBROW CUSTOMS
We love to welcome new vendors on
board and this month we have a couple of them. Lowbrow
Customs has been adding many new products and we
intend to be bringing them to you here in the Skinny as well
as our upcoming FatBook™ and OldBook™ catalogs. We
think that your customers will be excited by these unique
high-quality parts and accessories. All in-stock and ready to
go right now.
0701-0710
P-NUT
TANKS
•P-nut tanks
offers 2
gallon capacity
•Include 1/4” petcock bungs and undrilled
DIY mounting tabs for custom installation
•Made from heavy gauge 1mm steel
(approximately 19 gauge)
•Pressure tested
•Available with mounting tabs welded and
not welded to the tank
•Tank measures 141/2” L (163/4” end of tab
to end of tab) x 71/2” T (83/8” to top of filler
bung) x 83/4” W (at the widest point)
•Tunnel measures 13/4” W x 21/4” D at the
tank rear and 53/4” D at the front of tunnel
•Accept most British-style gas caps
39MM FORK
SHROUDS
0701-0711
PART #
DESCRIPTION
0701-0711
0701-0710
W/ unwelded mounting tabs
W/ welded mounting tabs
SUG. RETAIL
FENDER STRUT KITS
•Supports to help keep your rear fender in place
•Kits available in steel and stainless steel
•Include two of the following: 3/8”-16 full radius
bungs, 3/8” counterbore bungs, 1/2” L 3/8”-16 threaded
bungs, stainless steel Allen head cap bolts, stainless
steel Allen head bolts, 18” L 1/2” thick steel rods
•All bungs and steel rods are cold rolled mild steel,
easy to weld, paint, powdercoat or chrome
•Made in the U.S.A.
$169.95
169.95
1410-0069
PART #
DESCRIPTION
SUG. RETAIL
1410-0068
1410-0069
Steel
Stainless steel
$36.95
49.95
0411-0058
0411-0060
•Easy bolt-on installation after front fender removal
•Fit all 39mm narrow glide forks
•Allen hardware included
•14” L
•Available in black, chrome and raw
•Sold in pairs
PART #
DESCRIPTION
0411-0058
0411-0059
0411-0060
Black
Chrome
Raw
4210-0082
4210-0083
SUG. RETAIL
$149.95
149.95
119.95
4210-0084
0706-0224
0706-0225
GAS TANK
FUEL SIGHT
GAUGE KITS
INSTRUCTIONAL
DVDS
•Visually inspect your fuel level
•Include smooth chromed brass 90°
fittings with 1/8” x 1/4” hose barb, mild
steel tophat 1/8” NPT bungs, stainless
steel hose clamps with stainless screw
(polished finish) and 10” of 1/4” i.d.
polyurethane fuel line
•Available in clear or red
•Made in the U.S.A.
PART #
DESCRIPTION
0706-0224
0706-0225
Clear
Red
6
0411-0059
•Informative DVDs to help
you maintain
your motorcycle
PART #
SUG. RETAIL
$38.95
38.95
4210-0085
DESCRIPTION
TIG Welding Fundamentals w/ David Bird
Shovelhead Tune & Service w/ Frank Kaisler
MIG Welding Fundamentals w/ David Bird
Ironhead Sportster Tune & Service w/
Frank Kaisler
4210-0087 Big Twin 4-Speed Transmission Rebuild w/
Frank Kaisler
4210-0082
4210-0083
4210-0084
4210-0085
4210-0087
SUG. RETAIL
$39.95
39.95
39.95
39.95
39.95
11/4” TWIN PEAKS
TOURING HANDLEBARS
0601-2265
•Handlebars with an emphasis on touring comfort
•More parallel wrist angles for a perfect pullback angle
and stress-free riding
•Flowing bends on the uprights designed specifically for
Batwing fairing bikes
•Drilled for internal wiring
•Can be used on cable and
TBW (Throttle By Wire) applications
•Made in the U.S.A.
CHROME PART #
SUG. RETAIL
FOR 96-13 FLHT/FLHX AND H-D FL TRIKES
0601-2265
0601-2267
0601-2269
$209.95
209.95
209.95
BLACK PART #
0601-2266
0601-2268
0601-2270
0601-2270
SUG. RETAIL
$209.95
209.95
209.95
DESCRIPTION
END RISE
WIDTH
CENTER WIDTH
PULLBACK
14” Bagger
16” Bagger
18” Bagger
14”
16.5”
18”
33.5”
33.5”
33.5”
12”
12”
12”
5.25”
5.25”
5.25”
ELECTROMAGNETIC
CRUISE ASSIST
•Push-button electromagnetic cruise control gives your wrist a rest
•Uses magnetic force to hold throttle position steady, but is easy to
override when necessary
•Sets with just the push of a button; push again or tap the brakes to
release (can also pull in the clutch on 07-11 models to release)
•Includes chrome levers and ISO®-Grips
NOTE: Cannot be used on motorcycles equipped with a hydraulic clutch.
NOTE: Not compatible with Küryakyn Switch Housing covers.
PART #
DESCRIPTION
0632-0590
For 96-07 FLT/FLHT/FLHR/FLTR/FLHX, 96-11 Dyna,
96-10 FXST/FLST, 96-03 XL
1501-0419
SUG. RETAIL
$259.95
1501-0420
FORK SKINS
•An economical way to dress up the appearance of the front fork
lower legs
•Provide the improved handling associated with a fork brace
•Gloss black and chrome finish
•Easy installation; no disassembly required
PART #
DESCRIPTION
0412-0231
For 04-13 XL with single disc (except 09-13 883N,
08-09 1200R, 08-12 1200N, 10-13 1200X,
10-12 XR1200/X, 11-13 1200C)
SUG. RETAIL
$199.95
STANDARD TECH
CONNECT
ACCESSORY
MOUNT
•The easy, fast, secure way to mount your iPhone®, smartphone, GPS or
other electronic device to your fairing
•Adjustable swivel head allows ideal positioning of the device for
easy viewing
•Quick-disconnect design allows removal in just seconds
•Accept standard Tech Connect device holders (sold separately)
•Mount and pivot plate are black
•Standard mount measures 23/8” x 17/8”
•Not for use with Küryakyn Accessory Pouches
SISSY BARS
•Solid steel 1/2” square tubing construction with a
beautiful chrome finish
•Sissy bars measure 83/4” W (outside dimensions)
with 11/4” mounting hole spacing for 1/4” -20 bolts
•Fit stock and most aftermarket side plates that accept 83/4” wide
square bars
•Sold each
PART #
DESCRIPTION
SUG. RETAIL
1501-0419
1501-0420
Short (15” tall)
Tall (20” tall)
$69.95
79.95
PART #
DESCRIPTION
0521-1056
Right-side fairing mount for
96-13 FLHT/FLHX and H-D FL Trikes
SUG. RETAIL
$39.95
7
FUEL-TOOL
This month we are very fortunate to welcome two new
manufacturers to the Drag Specialties family. Fuel-Tool is
a newer family-owned and operated business backed by
the long-term successes and principles of founder Mike
McAvey. Mike along with his wife, three of their sons and
several others, design, test, assemble and package every
one of their innovative new products, like the ones you see
here, all out of their Ridgewood, NJ facility.
FUEL CHECK VALVE REBUILD
KIT INSTALLATION TOOL
•The industry’s first and only rebuild kit
installation tool
•Provides for fast and easy professional
installation of check valve O-Ring (PART #07060221) or Rebuild kit (PART #0706-0223) without
having to remove tank from the bike
FUEL PRESSURE
CHECK GAUGE
•Provides simple, fast and accurate fuel
pressure checks
•Quickly diagnoses loss of power, poor fuel
economy and hesitation and stalling
•Includes a solid brass adapter and release valve,
steel housing (100 psi) gauge,
stainless steel springs, Viton O-Rings, O-Ring
lubricant and nylon storage pouch
•Releases fuel through drain line with the push
of a button
PART #
DESCRIPTION
SUG. RETAIL
3850-0216 For 01-13 H-D
models w/ Delphi
fuel injection
$129.95
PART #
DESCRIPTION
3850-0215
For 01-13 H-D models w/ Delphi fuel injection
FUEL SHARING
SYSTEM
•Simple and easy to
use with no tools or
modifications needed
•Entire connection and
disconnection takes
only seconds
•Transfers up to one quart of
fuel every 20 seconds; will not
stall engine while in use
•Small and compact size, stores
anywhere; storage pouch included
PART #
DESCRIPTION
3850-0214
For 01-13 H-D models w/ Delphi fuel injection
REPLACEMENT O-RING
FOR FUEL CHECK VALVE
SUG. RETAIL
$99.95
FUEL CHECK VALVE
REBUILD KIT
•Eliminate the need for replacing
expensive check valve and fuel line when only an O-Ring is needed
•Made from long-lasting, high-quality Dupont® Viton
•Sold each, or in a 5-pack
PART #
DESCRIPTION
FOR 01-13 H-D MODELS WITH DELPHI FUEL INJECTION
8
$79.95
0706-0222
0706-0221
0706-0221
0706-0222
SUG. RETAIL
Single pack
5-pack
SUG. RETAIL
$3.95
11.95
•The industry’s first and only rebuild kit
•Eliminate the need for replacing expensive
check valve and fuel line when only a rebuild is needed
•Kit includes long-lasting, high-quality Dupont® Viton O-rings, solid brass
nickel-plated check valve and stainless steel springs
PART #
DESCRIPTION
0706-0223
For 01-13 H-D models w/ Delphi fuel injection
SUG. RETAIL
$11.95
3501-0868
STRONG
ARM
INNER
FAIRING
BRACKETS
SADDLEBAG
LATCH COVERS
•Made from super-strong lightweight injection-molded high-impact nylon
•Pocketed ribbed design provides superior strength, as well as being
lighter than stock brackets
•Help reduce fairing vibration; bigger, heavier aftermarket speakers and
amps are not a problem anymore
•Replace OEM #58478-96B (left) and #58479-96B (right)
•Sold in pairs
•Made in the U.S.A.
PART #
DESCRIPTION
2330-0102
For 96-13 FLHT, FLHX (w/ OEM-style fairing)
SUG. RETAIL
0703-0567
$96.95
3501-0869
•CNC-machined from
6061 billet aluminum; available in either chrome or black anodized finish
•Feature a back cut design with diamond cut center
•Replace stock faceplates on Touring models with hard bags
•Retain all OEM functions
•Mounting hardware included
•Sold in pairs
•Made in the U.S.A.
PART #
DESCRIPTION
FOR 93-13 FLT, FLHT, FLHX, FLHR, FLTR MODELS
Chrome diamond cut
Black anodized diamond cut
3501-0868
3501-0869
SUG. RETAIL
$248.95
248.95
0703-0574
0703-0559
0703-0586
0703-0583
BILLET GAS CAPS/FUEL GAUGE CAPS
•CNC-machined billet aluminum
•Available in vented, non-vented and dummy w/ LED fuel gauge application
•LED caps are user programmable to light LED at any pre-set fuel level
•Available in Beveled or Slot Track styles in black or chrome
•Sold each
0703-0566
NOTE: LED caps fit tanks originally equipped with left-side fuel gauge.
FOR L96-13 H-D
PART #
DESCRIPTION
VENTED
SUG. RETAIL
FOR 82-E96 H-D
PART #
DESCRIPTION
VENTED
SUG. RETAIL
0703-0567
0703-0568
0703-0569
0703-0570
Beveled, black
Beveled, chrome
Slot Track, black
Slot Track, chrome
$89.95
89.95
89.95
89.95
0703-0575
0703-0576
0703-0577
0703-0578
Beveled, black
Beveled, chrome
Slot Track, black
Slot Track, chrome
$89.95
89.95
89.95
89.95
0703-0571
0703-0572
0703-0573
0703-0574
Beveled, black
Beveled, chrome
Slot Track, black
Slot Track, chrome
89.95
89.95
89.95
89.95
0703-0579
0703-0580
0703-0581
0703-0582
Beveled, black
Beveled, chrome
Slot Track, black
Slot Track, chrome
89.95
89.95
89.95
89.95
0703-0583
0703-0584
0703-0585
0703-0586
Beveled, black
Beveled, chrome
Slot Track, black
Slot Track, chrome
169.95
169.95
169.95
169.95
NON-VENTED
LED FUEL GAUGE
NON-VENTED
FUEL DOOR COVERS
•Billet aluminum construction
•Available in two styles, Slot Track and Beveled,
in black or chrome finishes
PART #
DESCRIPTION
SUG. RETAIL
FOR 08-13 FLTR/FLHT/FLHX/H-D FL TRIKES
0703-0559
0703-0560
0703-0565
0703-0566
Slot Track, chrome
Slot Track, black
Beveled, chrome
Beveled, black
$149.95
149.95
149.95
149.95
0703-0561
0703-0562
0703-0563
0703-0564
Slot Track, chrome
Slot Track, black
Beveled, chrome
Beveled, black
149.95
149.95
149.95
149.95
FOR 92-07 FLT/FLHT
9
RAM® MOUNTS
The folks at RAM like to point out that they offer the largest
selection of motorcycle mounting solutions in the industry
for all popular devices. Their high-quality materials ensure
devices are safe, secure, and within riders’ reach. Also,
RAM’s patented design dampens shock and vibration to
help reduce wear and tear on expensive electronics and
cameras. They are a great way for any rider to enhance the
riding experience.
Step 3
Step 2
Step 1
Step 4
RAM MOUNTING SYSTEMS
•Offer the most complete selection of mounting solutions designed specifically for motorcycles, ATV/UTVs, snowmobiles and personal watercraft
•RAM’s patented rubber ball and socket design is ideally suited for these high-vibration applications
•In addition, the ball and socket design allows the user to adjust their mounted device to the perfect viewing angle quickly and easily
•RAM will give you the ability to help you mount your cell phone, Go Pro camera, GPS device and much more
FOUR STEPS TO CONFIGURING YOUR MOUNT:
STEP 1: PICK A BASE
STEP 2: PICK AN ARM
STEP 3: PICK AN ADAPTER
STEP 4: PICK A CRADLE
RAM MOUNT
UNIVERSAL BASES
•Marine-grade aluminum with
a black powder-coat finish,
unless noted
•1” rubber ball
•Mounting hardware included
0603-0458
PART #
DESCRIPTION
0603-04583
0603-0459
0603-04621
0603-04632
Handlebar U-bolt/brake/clutch perch mount (.5-1.25” diameter)
U-bolt mount (.5-1.25” diameter)
Adhesive mount
3/8”-16 post mount
1High-strength
composite.
2
Natural finish.
3
0603-0470
High-strength composite
10
SUG. RETAIL
$17.95
16.95
14.95
8.95
0603-0468
•High-strength composite
•Consists of double 1” diameter
open-ball sockets with a 360° rotation
point at the center and a connecting
swivel joint that rotates forward and
back 180°
•The rubber ball and socket at either
end and a central pivot point provide
unsurpassed adjustability
•The RAM ball sockets maximize ball
coverage for optimal fit
•5” overall length
DESCRIPTION
0603-0463
Includes 2-1/4”-20 x 2”, and 2-6mm x 55mm screws for American and Metric thread applications.
DOUBLE SOCKET ARM
WITH SWIVEL
PART #
0603-0462
0603-0459
RAM DOUBLE
SOCKET ARMS
RAM DOUBLE
1” BALL ADAPTER
•Marine-grade
aluminum with a black
powder-coated finish
•Fit 1” rubber ball,
bases and adapters
SUG. RETAIL
$33.95
PART #
DESCRIPTION
0603-0467
0603-0468
0603-0469
Short 2”
Medium 3”
Long 5.2”
SUG. RETAIL
$14.95
14.95
23.95
•Marine-grade aluminum with a 1” rubber ball on
both ends
•Allow the connection of two 1” socket arms
•When measured from ball center to ball center
the arm length is 1.75”
•Ideal if your mount arm is too short
PART #
DESCRIPTION
0603-0496
Marine-grade aluminum
SUG.
RETAIL
$17.95
RAM MOUNT
ADAPTERS
0603-0471
0603-0472
•Marine-grade aluminum with
a black powder-coat finish
•1” rubber ball
•Predrilled holes in bases
allow mounting to a variety
of arms and cradles
RAM LOCKING KNOB
•Replaces the existing knob on the
socket arm
•Locks the arm firmly in place and gives
added security
PART #
DESCRIPTION
0603-0495
Marine-grade aluminum
SUG. RETAIL
$24.95
RAM UNIVERSAL
CAMERA AND
CAMCORDER ADAPTERS
PART #
DESCRIPTION
0603-0471
0603-0472
Ball w/ adapter AMPS hole
Ball w/ adapter diamond-shaped
SUG. RETAIL
$8.95
8.95
GOPRO® CAMERA ADAPTER
•PART #0603-0473 consists of a
0603-0474
1” diameter rubber ball, connected to a
0603-0473
round base with 1/4”-20 camera thread
•PART #0603-0474 consists of a 1” diameter rubber ball, connected to a
2.5” diameter round base with 1/4”-20 thread
•The round base provides extra support and stability for cameras that rest
on top of it
•The male 1/4”-20 threaded steel stud will connect to any standard female
thread found on camcorders and digital cameras
•Compatible cameras include Contour GPS, Contour HD, Gobandit GPS-HD,
GoPro HD helmet HERO, GoPro HD Motorsports HERO, GoPro HD Surf HERO,
GoPro Helmet HERO Wide, GoPro Motorsports HERO, GoPro Motorsports
HERO Wide, GoPro RC HERO, GoPro Surf Hero and GoPro Wide HERO
PART #
DESCRIPTION
0603-0473
0603-0474
High-strength composite
Marine-grade aluminum
SUG. RETAIL
$11.95
11.95
•High-strength composite construction
•Consists of a 1” diameter rubber ball,
connected to a custom
GoPro® adapter
•Patented rubber ball design dampens
shock and vibration, helping to extend
the life of your camera
•Multiple articulation and adjustment
points for perfect viewing angles
•Attaches directly to the under-side of the
camera, replacing the factory mounting bracket
•Compatible with GoPro® cameras include HD HERO,
HD HERO2, HD HERO3 and HD HERO 960
•Mounts to many RAM double-socket arms and
mounts (sold separately)
NOTE: Camera not included.
PART #
DESCRIPTION
0603-0475
High-strength composite
SUG. RETAIL
$8.95
0603-0489
0603-0481
0603-0483
0603-0493
0603-0482
0603-0480
0603-0488
0603-0490
RAM UNIVERSAL CRADLES
FOR PHONES AND GPS
•High-strength composite construction
•Include a set of two nuts and bolts to connect
to any of the RAM compatible mounts
•Contents not included
0603-0491
NOTE: D
oes not come with ball mount adapter;
use PART #0603-0472 to mount to Ram
double socket arm.
PART #
APPLE
0603-0486
0603-0493
GARMIN
0603-0480
0603-0481
0603-0482
0603-0483
0603-0488
DESCRIPTION
iPhone 4 w/o case, skin or sleeve/iPhone 4S
w/o case, skin or sleeve
iPhone 5 w/o case, skin or sleeve
Nuvi 1440/1450/1490T
Nuvi 500/510/550/Zumo 220
Nuvi 200W/205W/220/250W/255W/260W/265W/26
5WT/285WT/2455LMT/2475LT/2495LMT/465T
eTrex Legend C/Cx/HCx/Venture Cx/Hc/
Vista C/Cx/HCx
Astro 220/GPS 60/GPSMAP 60/60C/60CSx/60Cx
0603-0494
SUG. RETAIL
$10.95
9.95
12.95
11.95
11.95
10.95
0603-0492
PART #
DESCRIPTION
GARMIN (CONT)
0603-0489
0603-0490
0603-0491
0603-0494
SPOT
0603-0479
10.95
0603-0479
TOM TOM
0603-0492
Nuvi 200/205/250/255/260/265T/270
Nuvi 1300/1310T/1350/1350T/1370T/1390/1390T/
2455LT/2455LMT/2475LT/2495LMT
Astro 320/GPSMAP 62/62s/62sc/62st/62stc
Nuvi 50/50LM
SUG. RETAIL
$12.95
11.95
9.95
10.95
SPOT IS™ satellite GPS messenger/SPOT satellite
GPS messenger
11.95
ONE XL/XLS
11.95
11
RAM MOUNT
PISTOL HOLDER
AND CRADLE
RAM SELF-LEVELING
CUP HOLDER AND COZY
WITH 1” BALL
•Marine-grade aluminum
with a black powdercoat finish
•Includes hardware to
connect the holder and cradle to any RAM compatible mount
•Contents not included
NOTE: D
oes not come with ball mount adapter; use PART #0603-0471 to
mount to Ram double socket arm.
PART #
DESCRIPTION
0603-0487
Marine-grade aluminum with a
black powder-coat finish
SUG. RETAIL
RAM SEALED-ENCLOSURE
AQUA BOXES
$21.95
•The perfect accessory for any vehicle
including motorcycles and ATVs
•Includes a 1” rubber ball for easy
mounting to any arm
•Easy installation and positions to keep
your favorite beverage within reach
•Comes with a RAM can insulator
PART #
DESCRIPTION
0603-0476
Ram self-leveling cup holder and cozy
0603-0485
SUG. RETAIL
$18.95
0603-0484
•High-strength composite construction
•Include AQUA Box® case, safety lanyard, belt clip button,
belt-clip and cradle (attaches to RAM
ball-and-socket mounts)
•Floats to prevent accidental loss if dropped in water
•Feature a storage area which provides buoyancy and is
perfectly sized for a driver’s license or credit card
•Weather-resistant/splashproof
•Unique patented design allows access to all side buttons
on the phone while in case
•Replaceable PVC vinyl screen offers a clear view of the
screen, allowing easy operation of the touch screen
while in the case
•Easy to pocket or carry
•Text, take photos/video and make/take calls, all while protecting your phone
•Contents not included
NOTE: Does not come with ball mount adapter; use PART #0603-0471 to mount to Ram double-socket arm.
PART #
DESCRIPTION
0603-0485
0603-0484
Small AQUA Box® Pro 10; fits Smartphones up to 4.58” H x 2.46” W x 0.47” D
Large AQUA Box® Pro 20; fits Smartphones up to 5.38” H x 2.8” W x 0.55” D
SUG. RETAIL
RAM UNIVERSAL
FINGER-GRIP™ CRADLE
•This mount is designed to hold cell phones (check
measurements below for dimensions), 2-way radios
and GPS devices
•Works with OtterBox (Defender, Commuter, Impact)
Cases, phones with bumper, and twisted metal case
•High-strength composite
•Comes with three sets of four flexible rubber-coated
fingers placed along the sides to grip your device
•The fingers open by squeezing the ends of the holder
•The bottom of the holder includes a back plate that
adds support to the device being held by the mount
•Can also be used with several other phone
accessories including Samsung and LG
•The spine plate contains the universal AMPS and 1.5” x 2” hole patterns
•Height dimensions: minimum with top and bottom plates is 5.25” and
maximum with top and bottom plates is 6.0”
•The top and bottom plates can be removed for larger devices
•Spine plate dimensions: 3” W x 3” H
•Using short-arm side clamps: maximum depth is 0.75”, minimum width is
1.25” and maximum width is 3.0”
•Using medium-arm side clamps: maximum depth is 1.25”, minimum width
is 1.5” and maximum width is 3.5”
•Using long-arm side clamps: maximum depth is 1.6”, minimum width is
2.25” and maximum width is 3.5”
NOTE: D
oes not come with ball mount adapter; use PART #0603-0472 to
mount to Ram double-socket arm.
PART #
DESCRIPTION
0603-0477
High-strength composite
12
SUG. RETAIL
$27.95
$37.95
36.95
RAM UNIVERSAL X-GRIP™
CELL PHONE CRADLE
WITH 1” BALL
•High-strength composite and rustproof
marine-grade stainless steel construction
•Spring-loaded holder expands and contracts
for perfect fit of your device
•Rubber-coated tips will hold device firm
and stable
•Includes 1” ball; mount adapter is
not required
•Versatility of holder allows for attachment
to many RAM arms
•Compatible devices: Apple iPhone 5 with or without case/sleeve, Apple
iPhone 4S with or without case/sleeve, Apple iPhone 4 with or without
case/sleeve, Apple iPhone 3GS with or without case/sleeve, Apple iPhone
3G with or without case/sleeve, Apple iPhone with or without case/
sleeve, Apple iPod touch (all models) with or without case/sleeve, Apple
iPod (G1-G5), and Samsung GALAXY S4 with or without case/sleeve
•Compatible with handheld devices that will fit holder dimensions:
minimum width of 1.875”, maximum width of 3.25” and a depth of 0.875”
•It is important to verify the dimensions of your handheld device with a
case/sleeve/skin when determining the overall size
•Contents not included
PART #
DESCRIPTION
0603-0478
High-strength composite; rustproof
marine-grade stainless steel construction
SUG. RETAIL
$25.95
PREDATOR
2-UP SEATS
•Solar-reflective
leather in the
seating area and automotivegrade vinyl on the sides;
patented process reduces
surface temperature by as much
as 25°F for a cooler seat, higher
durability and longer life over
conventional leather or vinyl
•Molded polyurethane foam for
maximum comfort and styling
•3/16” ABS thermoformed seat base for a perfect fit
•Rubber bumpers and fully carpeted bottom
to protect paint
•Fit with all Drag and most H-D sissy bars
•Include all mounting hardware
•Made in the U.S.A.
0802-0791
0802-0790
PART #
DESCRIPTION
FOR 11-13 FXS, 12-13 FLS MODELS (29” L X 13” W FRONT X 71/2” W REAR)
SUG. RETAIL
Smooth
Flame stitch
0802-0790
0802-0791
0802-0779
$299.95
309.95
0802-0780
PREDATOR SEATS
•Solar-reflective leather in the seating area and automotive-grade vinyl on the sides; patented process reduces surface temperature by
as much as 25°F for a cooler seat, higher durability and longer life over conventional leather or vinyl
•Custom-molded polyurethane foam for maximum comfort and styling
•3/16” ABS thermoformed seat base for a perfect fit
•Rubber bumpers and fully carpeted bottom to protect paint
•Fits with all Drag and most H-D sissy bars
•Include all mounting hardware
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
FOR 11-13 FXS, 12-13 FLS MODELS ( 13” W FRONT X 5” W REAR X 29” OVERALL)
0802-0779
Smooth
$279.95
PART #
DESCRIPTION
SUG. RETAIL
FOR 11-13 FXS, 12-13 FLS MODELS ( 13” W FRONT X 5” W REAR X 29” OVERALL) (CONT)
0802-0780
Flame stitch
$289.95
SMALL LOW-PROFILE SPRING SOLO SEAT
•Constructed of 1/2” closed-cell foam
•Low-profile for that Bobber look
•Features a heavy steel contoured seat base with a black finish
•Includes adjustable front seat hinge and two rear mount studs for springs; order
springs separately (PART #DS-902011, 0820-0010 or 0820-0029)
•1” x 3/16” welded center bar
•Studs are 5/16” x 1” L and 6” center-to-center
•Made in the U.S.A.
PART #
FOR CUSTOM APPLICATIONS (13” L X 10” W X 3/8” H)
0806-0074
DESCRIPTION
Black vinyl w/ white stitching
SUG. RETAIL
$99.95
13
CHROME OUTER PRIMARY COVER
•Rugged, die-cast aluminum construction with a
chrome-plated finish
•Seals and other components must be ordered
separately to complete installation
PART #
DESCRIPTION
1107-0325
For 06-13 FXD; repl. OEM #60764-06
SUG. RETAIL
$299.95
BLACK
DERBY COVER
•Die-cast construction with a
domed design
•Available in a black satin finish
•Includes mounting hardware
REPLACEMENT
DRIVER
FLOORBOARD INSERTS
PART #
DESCRIPTION
1107-0287
For 04-13 XL; repl. OEM #34760-04
SUG. RETAIL
$34.95
•Black rubber inserts with built-in dampers
•Sold in pairs
PART #
DESCRIPTION
1621-0462
For 06-13 FLHT, FLHR and FLTR, 06-09 FLSTC
and 06-13 FLSTF repl. OEM # 50614-06
SUG. RETAIL
$44.95
SHOCK BOLT
COVER KITS
•Designed to cover the
upper shock
mounting bolts
•Available in chrome
or black
•Kits include two covers and
mounting hardware
•Fits over the OEM fitting on the bottom of the tank
•Two-piece design for easy installations
•Available in a chrome finish
•Sold each
PART #
DESCRIPTION
0706-0210
For 02-13 FLT, 01-13 XL, 04-13 FXD
SUG. RETAIL
$19.95
1313-0119
PART #
DESCRIPTION
FOR 06-13 DYNA MODELS (EXCEPT FLD/FXDF/FXDL) 04-13 XL
1313-0118
1313-0119
FUEL LINE FITTING COVER
Chrome
Black
SUG. RETAIL
$29.95
29.95
SKULL GAS CAPS
•Cast aluminum construction
•Chrome plated with a hi-gloss black back-ground
•Available in vented and non-vented
EASY FIND
KICKSTAND EXTENSION
PART #
FOR L96-13 MODELS
•Chrome extension makes hard-toreach kickstands easier to operate
•Includes mounting hardware
NOTE: Drilling required.
PART #
DESCRIPTION
SUG. RETAIL
0510-0221
For 07-13 FLST
$24.95
14
DESCRIPTION
SUG. RETAIL
0703-0523
0703-0524
Vented
Non-vented
$34.95
69.95
0703-0525
0703-0526
Vented
Non-vented
34.95
69.95
FOR 82-E96 MODELS
LED 41/2” SPOTLIGHT
•Feature high-powered U.S.A.-made “CREE” power LED chips for lighting with
low power consumption
•Long life, up to 20 times the life of incandescent or halogen bulbs
•Vibration resistant
•Single beam
•SAE approved
•Plug directly into the existing wiring, compatible with most light housings
•Sold each
PART #
DESCRIPTION
2001-0660
41/2” LED sealed beam spotlight
SUG. RETAIL
$159.95
REAR LED TURN SIGNALS
REPLACEMENT TOURING
FRONT TURN SIGNALS
•Flat style design
•Gloss black body with smoke lens and amber single-function LEDs
•Mounts to OEM or OEM style flat turn signal mounts
•Sold in pairs
•Matching front turn signals available; see the 2013 FatBook page 850
•Feature chrome housings with amber lenses
•Dual filament (1157 bulb)
•Sold in pairs
NOTE: May require use of a load equalizer to function properly.
PART #
DESCRIPTION
SUG. RETAIL
2020-0590
For 94-13 FL models w/ OEM flat signal mount
$109.95
REPLACEMENT TURN
SIGNAL LENSES
FOR DRESSERS
•Replaces the OEM lenses
•Available in amber, red, clear
or smoked
•Sold as a pair; clear and smoked
lenses require amber or red bulb
Amber
Clear
DESCRIPTION
For 94-13 FL models w/ flat signal
mount; repl. OEM #68767-94
2020-0596
2020-0595
2020-0594
PART #
DESCRIPTION
SUG. RETAIL
FOR 86-13 FLT, FLHT, FLHR (EXCEPT FLHRS, FLHX), FLST, FLSTC, FXRD, FXRT;
(W/ FLAT-STYLE SIGNAL HOUSING)
2020-0594
2020-0595
PART #
2020-0591
$8.95
8.95
SUG. RETAIL
$55.95
2020-0597
PART #
DESCRIPTION
SUG. RETAIL
FOR 86-13 FLT, FLHT, FLHR (EXCEPT FLHRS, FLHX), FLST, FLSTC, FXRD, FXRT;
(W/ FLAT-STYLE SIGNAL HOUSING) (CONT)
2020-0596
2020-0597
Red
Smoke
$8.95
8.95
1621-0539
1621-0540
ELITE EDGE DRIVER FLOORBOARDS
•Distinct, custom style
•Constructed of 6061 T-6 billet aluminum with rubber inserts
•Easy to install
•Available with chrome or black-anodized finish
•Sold in pairs
•Matching shifter pegs with chrome or black-anodized finish
available separately (PART #s 1603-0134 and 1603-0135)
•Made in the U.S.A.
PART #
DESCRIPTION
FOR 80-13 FLT, FLHT, FLHR, FLTR, H-D FL TRIKE, 86-13 FLST
1621-0539
1621-0540
Black
Chrome
SUG. RETAIL
$497.95
497.95
15
2001-0770
2001-0778
2001-0773
2001-0767
2001-0771
7” VISION SERIES HEADLIGHT BEZEL
2001-0776
•Constructed from billet aluminum
•Available in five styles (Apex, Crossbar, Clean, Grill and Merc) and three finishes (chrome, Black Ops™ and Contrast Cut™)
•Contrast Cut™ starts with a polished cover that has been black anodized, then re-cut to open up the design
•Black Ops™ features gloss black on top of a contrasting textured black for the toughest, best-looking finish yet
•Replaces OEM headlight bezel
•Made in the U.S.A.
2001-0779
NOTE: Will fit with H-D Daymaker HID headlight.
FOR 84-13 FLHX/FLHR/FLHT AND H-D FL TRIKE
PART #
DESCRIPTION
SUG. RETAIL
APEX
PART #
CLEAN
DESCRIPTION
SUG. RETAIL
2001-0767
2001-0768
2001-0769
Contrast Cut
Chrome
Black Ops
$179.95
179.95
179.95
2001-0773
2001-0774
2001-0775
Contrast Cut
Chrome
Black Ops
$179.95
179.95
179.95
2001-0770
2001-0771
2001-0772
Contrast Cut
Chrome
Black Ops
179.95
179.95
179.95
2001-0776
2001-0777
2001-0778
Contrast Cut
Chrome
Black Ops
179.95
179.95
179.95
CROSSBAR
GRILL
PART #
MERC
DESCRIPTION
2001-0779
2001-0780
2001-0781
Contrast Cut
Chrome
Black Ops
SUG. RETAIL
$179.95
179.95
179.95
2350-0205
2350-0203
2350-0207
2350-0206
2350-0209
WINDSCREEN TRIM
•CNC laser cut from 6061 T-6 aluminum
•Available in three styles (Hole Shot, Scallop, Merc) and three finishes (chrome, Black Ops™ and Contrast Cut™) to choose from
•Contrast Cut™ starts with a polished cover that has been black anodized, then recut to open up the design
•Black Ops™ features gloss black on top of a contrasting textured black for the toughest, best-looking finish yet
•Made in the U.S.A.
FOR 96-13 FLHT/FLHX AND H-D FL TRIKE
PART #
DESCRIPTION
SUG. RETAIL
HOLE SHOT
2350-0203
2350-0204
2350-0205
Contrast Cut
Chrome
Black Ops
$79.95
79.95
79.95
PART #
MERC
2350-0206
2350-0207
2350-0208
DESCRIPTION
Contrast Cut
Chrome
Black Ops
SUG. RETAIL
$79.95
79.95
$79.95
PART #
SCALLOP
2350-0209
2350-0210
2350-0211
DESCRIPTION
Contrast Cut
Chrome
Black Ops
SUG. RETAIL
$79.95
79.95
79.95
THROTTLE SERVO COVER
•Simple, slim and attractive 2-piece design
•Covers throttle by wire servos
•Universal fit for all air cleaners
•Available in chrome and black anodized finishes
•Made in the U.S.A.
1015-0123
PART #
DESCRIPTION
FOR 08-13 FLHT/FLHR/FLTR/FLHX AND H-D TRIKE
1015-0124
16
1015-0123
1015-0124
SEPTEMBER 2013 | 9901-1374
Black anodized
Chrome
SUG. RETAIL
$69.95
69.95