Table of Contents Table of Contents Introduction Routers and

Transcription

Introduction
Overview ......................................................................................................................................... 3
Cisco Contact Information .......................................................................................................... 7
Routers and Access Servers
Cisco Routers and Servers at a Glance .................................................................................... 9
Cisco Routers and Servers Port Matrix ................................................................................... 11
Cisco Routers and Servers Overview ...................................................................................... 12
Cisco 700 Series ......................................................................................................................... 16
Cisco 800 Series ......................................................................................................................... 19
Cisco 1000 Series ....................................................................................................................... 22
Cisco 1600 Series ....................................................................................................................... 25
Cisco 1720 VPN Access Router ................................................................................................. 29
Cisco 2500 Series ....................................................................................................................... 32
Cisco 2600 Series ....................................................................................................................... 38
Cisco 3600 Series ....................................................................................................................... 43
Cisco MC3810 Multiservice Concentrator ............................................................................. 48
Cisco 4000 Series ....................................................................................................................... 51
Cisco AS5200/AS5300 Series ..................................................................................................... 55
Cisco AS5800/AccessPath ......................................................................................................... 60
Cisco 7200 Series ........................................................................................................................ 62
Cisco 7500 Series ....................................................................................................................... 66
Cisco 12000 Series ..................................................................................................................... 68
Switches and Hubs
Cisco Switches and Hubs at a Glance .................................................................................... 71
Cisco Switches and Hubs Port Matrix ................................................................................... 73
Cisco Ethernet and Fast Ethernet Switches Overview......................................................... 74
Cisco 1548 Micro Switch 10/100 .............................................................................................. 75
Cisco Catalyst 1900 Series ........................................................................................................ 77
Cisco Catalyst 2900 Series XL .................................................................................................. 85
Cisco Catalyst 5500/5000 Series ............................................................................................... 93
Cisco Catalyst 8500 Switch Routers ....................................................................................... 97
Cisco 1500 Series Micro Hubs .................................................................................................. 98
Cisco HP 10BaseT Hub-16M .................................................................................................... 100
Cisco 1528 Micro Hub 10/100 ................................................................................................... 102
Cisco FastHub Line .................................................................................................................... 104
i
Table of Contents
Table of Contents
Table of Contents
Security and Internet Products
Cisco Security and Internet Products at a Glance ..............................................................107
Cisco PIX Firewall .....................................................................................................................108
Cisco IOS Firewall Feature Set ...............................................................................................110
Cisco NetSonar ..........................................................................................................................112
Cisco NetRanger ........................................................................................................................114
CiscoSecure Software Product Line ......................................................................................116
Cisco LocalDirector ...................................................................................................................118
Cisco DistributedDirector ........................................................................................................120
Cisco Cache Engine ..................................................................................................................122
Cisco IP/TV .................................................................................................................................124
Cisco 6510 Service Selection Gateway ................................................................................126
ATM Products
Cisco LightStream 1010 ............................................................................................................127
Cisco BPX 8600 Series Wide-Area Switches ......................................................................128
Cisco MGX 8220 Edge Concentrator ......................................................................................130
Cisco IGX 8400 Series ..............................................................................................................132
Cisco TGX 8750 Core Switch ....................................................................................................134
Cisco MGX 8800 Series Wide-Area Edge Switches ...........................................................135
Network Management Products
Cisco Network Management Overview ................................................................................137
Resource Manager Essentials ................................................................................................138
CWSI Campus ............................................................................................................................140
CiscoWorks Windows .............................................................................................................142
CiscoWorks Blue .......................................................................................................................145
CiscoView ...................................................................................................................................147
Cisco Netsys SLM Suite ...........................................................................................................149
Cisco Netsys Baseliner V.4.0 ...................................................................................................151
Cisco SwitchProbe Series ......................................................................................................153
Service and Programs
Service and Support Matrix .....................................................................................................155
Service and Support Offerings ................................................................................................156
Warranty .....................................................................................................................................159
Distribution Financing ..............................................................................................................160
Purchase Order Financing .......................................................................................................161
ii
Introduction
Overview
Overview
In an effort to provide you with the best product information possible, Cisco is
replacing the Small-Medium Business Solutions Guide, the Quick Reference
Product Guide, and the Reseller Product Catalog with this new, all-in-one Cisco
Products Quick Reference Guide. This guide gives you the best of all three
previous publications, including product positioning statements, photos, tech
specs, and much more. Cisco is confident that you will find this new style easy
to use, as well as a great resource for quick product information.
New additions include the following:
• A “Cisco Contact Information” page that lists popular Cisco Web sites, fax
services, and helpline information
• “Products at a Glance” and “Port Matrix” pages that briefly highlight
features of the products included in that chapter
• Easy to remember Cisco Web site shortcut URLs for more information on
each product
• Memory and Cisco IOS® software cross-reference charts for router
products
Your feedback is important to us. Please send any comments or suggestions to
us by e-mail at [email protected].
Cisco Systems Overview
Cisco Systems is the worldwide leader in networking for the Internet. Cisco's
products and services give people access to the information they need by
connecting information devices through intelligent, secure, and reliable
networks. Our hardware and software products link computers so people have
access to information, regardless of differences in time, place, or type of
computer system. Customers benefit from Cisco networking solutions through
more efficient exchange of information, which in turn leads to cost savings,
process efficiencies, and closer relationships with customers, business partners,
and employees.
Cisco solutions are the networking foundation of thousands of companies,
universities, utilities, and government agencies worldwide. We are also a driving
force behind the global Internet, where more than 80 percent of the backbone
routers are from Cisco.
Cisco uses the Internet to conduct a substantial amount of its business. For
example, we provide more than 70 percent of our customer support over the
Internet while maintaining a high level of customer satisfaction. Our goal is to
help our customers improve their business by establishing interactive and
engaging electronic business relationships with their global customers, partners,
prospects, suppliers, and employees.
3
Overview
Cisco Products
Cisco products are presented in this guide in six categories:
• Routers and Servers
• Switches and Hubs
• Security and Internet Products
• Network Management
• ATM Products
• Services and Programs
The Cisco IOS Difference
Cisco IOS software is the platform that delivers network services and enables
networked applications. Cisco IOS software differentiates Cisco products from
other industry alternatives. It is the unifying thread, the glue, that integrates
components of our products. It solves security problems; it solves scalability
problems; it even keeps unnecessary traffic off the WAN to reduce service costs.
Cisco IOS technologies span across Cisco LAN and WAN system elements,
ensuring interoperability, centralized manageability, and reliability.
Guaranteed Interoperability
Cisco IOS software ensures interoperability among Cisco routers, switches, and
hubs within the main office and Cisco remote site routers to simplify installation
and management. Cisco IOS software protects users' investments by integrating
all network platforms and by supporting LAN and WAN standards that allow
interoperability with other vendors. This scenario enables the economical
expansion of bandwidth and the adoption of new technologies while preserving
the investment in the existing network infrastructure.
Unified Management
Cisco IOS software provides an array of network management capabilities
designed to meet the needs of today's distributed networks. Support for Simple
Network Management Protocol (SNMP), Telnet, and Remote Monitoring
(RMON) allow Cisco products to be managed from a central site, minimizing
administrative costs and maximizing network uptime. A common network
management application, CiscoWorks Windows provides an integrated and
consistent graphical interface to ease management and troubleshooting of Cisco
router, switches, and hub products.
Security
Security is a critical requisite for companies to realize the vast business potential
of the Internet. Multidimensional filters on Cisco routers prevent users from
knowing that other users or resources are even on the network. Encrypted
passwords, extended access lists, accounting, and logging features on the routers
provide protection from and information about unauthorized access attempts.
4
Overview
Physical firewalling, data encryption, and remote access security solutions
protect corporate information and assets, while allowing connection to the
Internet and remote users. On the LAN side, secure addressing capabilities on
the Catalyst series of switches ensure that network resource access is restricted
to only authorized users. No other vendor comes close to providing the level of
WAN and LAN security of Cisco products.
Bandwidth Optimization
Recurring WAN services, such as Integrated Services Digital Network (ISDN) or
Frame Relay, can be the most expensive component of the overall cost of
ownership. Cisco IOS software brings a richness of features for eliminating
unnecessary traffic across WAN links and intelligently selecting the most
economical WAN links available. An unparalleled breadth of features such as
snapshot routing, protocol spoofing, priority and custom queuing,
dial-on-demand (DDR) routing, bandwidth on demand (BOD), and
compression are all available to optimize the use of WAN bandwidth and reduce
WAN service costs.
Enhanced Multimedia Support
The use of multiprotocol multicast traffic has increased with the delivery of new
applications such as Insoft INTV!, CUSeeMe, and Apple QuickTime
audio/video conferencing packages, video servers, and the financial
communities' multicast-delivered market data. This type of traffic is typically
generated as broadcasts; therefore, all workstations receive the packets and
decide to accept or reject them. Although this process runs in the background
on most workstations, it consumes a portion of the network bandwidth
available to them, potentially keeping critical data from reaching the end
station. All Catalyst® series switches support Cisco Group Management
Protocol (CGMP) to prevent the flooding of IP multicast packets to all switched
ports, sending them instead to only those ports interested in the traffic. CGMP
works with and is based on the standards-based Internet Group Management
Protocol (IGMP) supported in Cisco routers. In addition, these routers support
resource allocation technologies such as Protocol Independent Multicast (PIM),
Weighted Fair Queuing (WFQ), and Resource Reservation Protocol (RSVP) to
meet the special demands of emerging audio and video services. In contrast,
most other vendors offer none of these critical features.
Cisco Service and Support—Understanding Your Business
Cisco understands that good service and support are important to the success of
your business. In fact, research shows that your service and support business
will grow 23 percent per year for the next five years. Are you ready?
Cisco is ready and is here to help. We realize that all companies have differing
service and support requirements, and we have designed programs that meet the
particular demands of your business. Many of these programs include several
service level-options, so you have the flexibility to define the level that best
addresses your needs. Through Cisco's Small and Medium Business Program,
for example, you can combine your value-added services with Cisco's service
5
Overview
elements and then resell the package to your customers. In addition, the
program enables you to move products more quickly, thus leading to faster
bookings. The Small and Medium Business Program not only increases the
return on your Cisco investment, it also increases your profits. Using Cisco's
service and support program also leads to increased customer satisfaction, and
when your customers are satisfied, they will remain loyal to you and will buy
more from you.
Packaged Service Options
Cisco's packaged service options give you a convenient way to sell service
directly to your customers or combine Cisco's packaged service options with
your own service offerings to deliver support tailored to your specific customers
or markets.
Cisco's packaged service options give you and your customers flexibility in
meeting their service and support needs. By combining your value-added
services with packaged service options from Cisco, you can increase product
margins, retain account control, increase service revenue, and ensure customers
of industry-leading service and support.
For more information about Cisco service and support programs, see the
“Service and Programs” section later in this guide.
6
Cisco Web Sites
URL
Sales Tools Central
Helpful, easy-to-use Web site with detailed product
information, sales tools, sample configurations, and
more
http://www.cisco.com/go/tools
Cisco Contact Information
Cisco Contact Information
Distribution Product Reference Guide (DPRG)
http://www.cisco.com/dprg
Complete list of pricing information, part numbers, and
more for distribution (2-tier) products. Data is refreshed
nightly. Available now in the US, coming soon to other
countries. CCO registration required.
Worldwide Contacts
Cisco office locations; directions; maps; and sales,
partners, and channel contacts
http://www.cisco.com/go/wwcontacts
Worldwide Distributors Web Site
List, by country, of authorized Cisco Distributors who
stock and resell Cisco products
http://www.cisco.com/go/disti
End-of-Life Web Site
List of Cisco products with last order and end-of-life
dates
http://www.cisco.com/go/eol
Technical Support
For customer support tips, software center, online
documents, and more
http://www.cisco.com/go/support
Cisco Product Quick Reference Guide
This guide is available on line here in PDF and HTML
formats; it is continually updated between tri-yearly
printings
http://www.cisco.com/go/guide
http://www.cisco.com/subscription
Cisco Subscription Service
Ordering service for one-time purchase of or annual
subscriptions to this guide or other Cisco documents
and CDs; phone order by calling 800 768-7162 (U.S. or
Canada) or 925 327-4072 (outside the U.S.)
FaxBack Systems
Phone Number
Product Information FaxBack System
800 770-4866 (within U.S.)
For data sheets, overviews, white papers, and more to 650 596-4488 (outside U.S.)
fax to you or your end users
Technical Support FaxBack System
For sample configurations, troubleshooting tips, and
more to fax to you or your end users
888 502-4726 (within U.S.)
650 596-4408 (outside U.S.)
Customer Helplines
Contact Information
Presales—Reseller Helpline
800 553-6387 (within U.S.)
408 526-7208 (outside U.S.)
[email protected] (e-mail)
www.cisco.com/go/presaleshelp
Post-Sales—Technical Assistance Center (TAC)
800 553-2447 (within U.S.)
408 526-7209 (outside U.S.)
408 526-8898 (fax)
[email protected] (e-mail)
7
Routers and Access Servers
Product
Features
Page
Cisco 700 Series
ISDN router
• 1-port BRI (optional NT1)
• Supports up to 30 users
• Optional 2 analog telephone ports
• Integrated 4-port Ethernet hub (on 77x models)
16
Cisco 800 Series
ISDN router with Cisco IOS technologies
• 1-port BRI (optional NT1)
• Optional 4-port Ethernet hub and 2 analog telephone ports
• Advanced security features
• Centralized remote access management capabilities
• Investment protection with field-upgradable Flash and DRAM
19
Cisco 1000 Series
Fixed-configuration desktop access router
• 1-port Ethernet
• 1-port BRI (optional NT1) or 1-port sync or async serial
22
Cisco 1600 Series
Modular desktop access router
• 1- or 2-port Ethernet (10BaseT)
• 1-port BRI (optional NT1) or 1-port sync or async serial
• 1 WAN interface card (WIC) slot
• Part of the Cisco Networked Office stack family
25
Cisco 1720
Flexible, secure VPN access router
• 1-port autosensing 10/100 Fast Ethernet LAN
• 2 WAN slots that support Cisco 1600, 2600 and 3600 data WIC
cards
29
Cisco 2500 Series
Fixed and modular configuration access routers and servers
• Single or dual LAN
• Ethernet or Token Ring
• Router/hub or access server
• Single, dual serial, or high-density serial models
32
Cisco 2600 Series
Modular access router, voice data gateway, and dial access
38
server
• Single or dual LAN (Ethernet, 10/100 Mbps Ethernet, Token Ring
and mixed Ethernet, and Token Ring options)
• Shares WAN interface cards and network modules with Cisco
1600,1720, and 3600 series
• Wide variety of media support, including async and sync serial,
ISDN, channelized T1/E1, Ethernet, analog modems, and ATM
• Voice/fax over IP
Cisco 3600 Series
Modular, high-density access router
43
• 2- and 4-slot models
ISDN, channelized T1/E1, Ethernet, Fast Ethernet, Token Ring,
digital modems, and ATM
• Voice/fax over IP
Cisco MC3810
Compact, low-cost, multiservice access concentrator
• 1-port Ethernet
• 2-ports serial
• 6-ports analog or 24/30-ports digital voice
• Data, voice, and video integration
Cisco Routers and Servers at a Glance
48
9
Product
Features
Cisco 4000 Series
Modular, high-density router
51
• 3 slots for all models
• Choice of 100-MHz or 133-MHz processor
ISDN, channelized T1/E1, Ethernet, Fast Ethernet, Token Ring,
FDDI, HSSI, ATM
Cisco AS5200 Series
Hybrid async and ISDN access servers
• 3 network interface card slots
• 2-ports PRI (T1/E1)
• 2-ports serial
• 24 to 48 (T1) and 30-60 (E1) integrated modems
55
Cisco AS5300 Series
Hybrid async and ISDN access servers
• 3 network interface card slots
• 4 and 8-ports PRI (T1/E1)
• 4-ports serial
• Up to 240 integrated modems
55
Cisco AS5800/
AccessPath
High-end dial products
• Hybrid asynchronous serial and ISDN line service
• Accommodate both mobile users and high-bandwidth users
60
Cisco 7200 Series
High-performance, high-density, modular, central site router
62
• Fully modular, chassis-based
• 4- or 6-slot models
• Choice of three system processors
• Wide variety of LAN and WAN options, including Ethernet, Fast
Ethernet, 100VG-Any LAN, Token Ring, FDDI, serial, ISDN, HSSI,
ATM, Packet over DS3/E3
Cisco 7500 Series
Premier high-end platform of multiprotocol routers
66
• 1- or 2-CyBus models offering 1 or 2 Gbps backplanes
• 5-, 7-, and 13-slot models
• Wide variety of LAN and WAN options including Ethernet, Fast
Ethernet, 100VG-Any LAN, Token Ring, FDDI, serial, ISDN, HSSI,
ATM, packet over DS3/E3
Cisco 12000 Series
Scalable gigabit switch router (GSR)
• 8- or 12-slot models
• Scalable switching fabric from 10–60 Gbps
• Optimized for IP
• Carrier class
10
Page
68
Cisco 7200 Series
Cisco 7500 Series
Cisco 12000 Series
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Cisco AS5800
X
X
Cisco AS5300
X
Cisco 4000 Series
X
Cisco MC3810
X
Cisco 3600 Series
X
Modular Ports Only
Cisco AS5200
Fixed & Modular Ports
Cisco 2600 Series
X
Cisco 2500 Series
Cisco 1000 Series
X
Cisco 1720
Cisco 800 Series
X
Cisco 1600 Series
Cisco 700 Series
Fixed Ports Only
X
X
X
X
Cisco Routers and Servers Port Matrix
Cisco Routers and Servers Port Matrix
LAN Ports
10-MB Ethernet
X
X
X
X
X
X
X
X
X
X
X
X
X
10-MB Ethernet (fiber)
100-MB Ethernet
100-MB Ethernet
(fiber)
X
10/100-MB Ethernet
Integrated Ethernet
Hub
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
100 VG
Token Ring
X
FDDI/CDDI
ATM
X
Gigabit Ethernet
WAN Ports
Sync Serial
X
Sync Serial w/ CSU
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
ISDN BRI (S/T)
X
X
X
X
X
X
X
X
ISDN BRI (U)
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
ISDN PRI/Ch T1
ISDN PRI w/ CSU
Async
POTS
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Integrated Modems
HSSI
X
DS3
ATM
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
SONET
X
Voice Ports
Analog
Digital
X
X
X
X
X
X
X
11
Cisco Routers and Servers Overview
Cisco’s full line of routers ranges from home office access routers to central site
access servers. The scope of Cisco’s products supports a significant number of
solution scenarios.
Ease of Use
Cisco's router configuration tools make it easy for end users, network
administrators, resellers and consultants to install Cisco routers.
Cisco Fast Step is an easy-to-use Microsoft Windows 95-, 98-, and NT
4.0-based software tool that simplifies the setup, monitoring, and
troubleshooting of Cisco routers for small office and home office users. Cisco
Fast Step leads the user through a step-by-step, wizards-based procedure that
simplifies the configuration of a Cisco router connected to an Internet Service
Provider (ISP) or remote corporate network. A user can set up a Cisco 700, 800,
or 1600 series router with Fast Step software.
FastStep uses a graphical display of the process and a help box to lead the user
through setting up the router.
FastStep software is available (no login required) from the CCO Software
Center, or on a separate CD-R0M located in every accessory kit for supported
products. For more information, see the Cisco Fast Step Web site at
http://www.cisco/go/faststep.
Cisco ConfigMaker is designed to configure a small to medium network of Cisco
routers, switches, hubs, and other network devices from a single PC. Cisco
ConfigMaker is an easy-to-use Microsoft Windows 95, 98, and NT 4.0-based
software tool. Cisco ConfigMaker is designed for resellers, consultants, and
network administrators who are proficient in LAN and WAN fundamentals and
basic network design.
12
For fast and efficient configuration of Ethernet networks and WAN connectivity,
Cisco ConfigMaker prompts users through the setup process. Online WAN
configuration worksheets list important information that the network
administrator must obtain from the Internet service provider or WAN service
provider before configuring the devices. To configure devices:
• The user drags and drops devices and connections from the palette to create
a network topology diagram.
• Individual devices and connections are configured using the task wizards
and information collected using the worksheets.
• Configurations are downloaded to the appropriate devices from a
standalone PC or over the network.
The ConfigMaker graphical user interface displays a network diagram that
shows the network devices in relationship to each other. Wizards are accessed
from the Task List, which keeps track of progress.
ConfigMaker supports 800, 1600, 1720, 2500, 2600, 3600, and 4500/4700
routers, switches, and the Cisco IOS Firewall Feature Set. Check documentation
for more details on specific modules and models supported. No previous
experience with the Cisco IOS® software command line interface is required.
ConfigMaker is available (no login required) from the CCO Software Center, or
on a separate CD-ROM located in every Software Feature Pack for supported
products. For more information, See the Cisco Configmaker Web site at
http://www.cisco/go/configmaker.
Bandwidth Optimization
Cisco IOS technologies deliver bandwidth optimization with these features:
• Dial-on-demand routing (DDR)—minimizes ownership cost by allowing a
router to automatically initiate and close a circuit-switched session
13
• Bandwidth on demand (BOD)—dynamically increases network throughput
by allowing a router to automatically establish a new, load-sharing
connection to the destination, in response to a definable load level
• Snapshot routing—a routing update mechanism that minimizes ownership
costs by eliminating the need for configuring and maintaining large static
tables, allowing dynamic routing protocols to be used on DDR lines
• Virtual bandwidth reservation and priority queuing—enhances throughput
by reserving bandwidth and prioritizing traffic based on the type of
application, its source, or its destination
• IPX® Protocol spoofing—optimizes Novell networking by responding to a
server’s Watchdog requests on behalf of a remote client
• Cisco IOS compression solutions—accomplished with header compression
for TCP/IP, per-interface compression (one set of dictionaries per hardware
link), and per-virtual circuit compression (one set of dictionaries per
compressed virtual circuit)
Security
Cisco’s powerful suite of security technologies includes:
• Network Address Translation (NAT) and Port Address Translation
(PAT)—hides private topology and IP addresses from an external network
• Digital Signature Standard (DSS) and digital certification—positively
authenticates users or devices
• Data Encryption Standard (DES)—enables 40/56-bit encryption
• Terminal Access Controller Access Control System Plus (TACACS+)—gives
complete network access security for dial-in connections
• Password Authentication Protocol (PAP) authentication—allows a remote
node to establish its identity using a two-way handshake
• Challenge Handshake Authentication Protocol (CHAP)
authentication—allows a remote node to establish its identity using a
three-way handshake
• Calling line identification—uses calling line identification to compare the
ISDN number of a calling device against a list of known callers
• Access lists—checks source address of packets (standard access lists) and
checks source and destination addresses and other parameters (extended
access lists)
• Lock and Key—allows per-user authorization in a shared-media
environment
• Context-based access control (CBAC)—provides secure, application-based
stateful filtering for the most popular protocols and a wide variety of
advanced applications; available in the Cisco IOS Firewall feature set.
14
Multimedia Features
Cisco IOS network services that support multimedia applications with
multimedia and multicast capabilities include:
• RSVP—dynamically reserves end-to-end bandwidth for delay-sensitive IP
traffic
• IP Multicast–Protocol Independent Multicast (PIM)—a multicast protocol
that can be used in conjunction with all unicast IP routing protocols
• Internet Group Management Protocol (IGMP)—indicates to the router if
any hosts on a given physical network belong to a multicast group
• AppleTalk Simple Multicast Routing Protocol (SMRP)—provides
connectionless, best-effort delivery of multicast datagrams
Quality of Service
Cisco IOS quality-of-service network services readily support bandwidthintensive traffic:
• Resource Reservation Protocol (RSVP)—establishes priority bandwidth
allocation
• Weighted Fair Queuing (WFQ)—adds new levels of control to previous
queuing methods
• Random Early Detection (RED)—monitors traffic levels on very large
networks to prevent congestion and guarantee priority traffic delivery
• Cisco IOS technologies that manage resource allocation include PIM,
Private Network-Network Interface (PNNI), and available bit rate (ABR)
15
Cisco 700 Series
Cisco 700 Series
The Cisco 700 series is a family of
affordable, easy-to-set up ISDN routers.
They provide home offices with high-speed
remote access to the Internet.
Some people who will especially benefit
from the 700 routers are home office
customers who want fast access to the Internet, VARs who need a profitable,
fast, and easy home office solution, and service providers who need an
affordable ISDN router for home office customers.
When to Sell
Sell This Product
When a Customer Needs These Features
Cisco 761M, 762M, 765M, • Internet access for home offices
766M
• Built-in NT1 for U.S. and Canada (Cisco 762M, 766M)
• Two plain old telephone service (POTS) interfaces to allow standard
telephone, fax, or modem to share ISDN line (Cisco 765M, 766M)
Cisco 771M, 772M, 775M, • Internet access for home offices
776M
• A cost-effective, unmanaged hub
• Built-in NT1 for U.S. and Canada (Cisco 772M, 776M)
• Two POTS interfaces to allow standard telephone, fax, or modem to
share ISDN line (Cisco 775M, 776M)
Key Features
• Fast Step configuration utility software enables Cisco 700 series router
installation in minutes using a Windows 95 desktop or NT platform
• Dynamic addressing of the Cisco 700 series and remote workstations for
ease of configuration and network management
• PAT for the creation of a private network and additional network security
• Dual tone multifrequency (DTMF) support, enabling basic network
configuration of the Cisco 700 series with a push-button telephone, after
which a network manager can dial into the Cisco 700 router to complete
the installation (Cisco 765M, 766M, 775M, 776M)
• Multilink PPP (MP) for standards-based B-channel aggregation (RFC
1717)
• Dynamic Host Configuration Protocol (DHCP) relay agent and server for
dynamic addressing of attached workstations
16
Cisco 700 Series
Specifications
Cisco 760 Series
Feature
Cisco 761M
Cisco 762M
Cisco 765M
Cisco 766M
Fixed LAN Ports
(connections)
1-port Ethernet
(10BaseT)
1-port Ethernet
(10BaseT)
1-port Ethernet
(10BaseT)
1-port Ethernet
(10BaseT)
Fixed WAN Ports
(connections)
1-port ISDN BRI (S/T)
1-port ISDN BRI (U)
2-port POTS
1-port ISDN BRI (U)
2-port POTS
Modular Slots
None
None
None
None
Processor Speed (type) 25-MHz (80386)
25-MHz (80386)
25-MHz (80386)
25-MHz (80386)
Flash Memory
1 MB
1 MB
1 MB
1 MB
DRAM Memory
1.5 MB (default)
2 MB (max)
1.5 MB (default)
2 MB (max)
1.5 MB (default)
2 MB (max)
1.5 MB (default)
2 MB (max)
Dimensions (HxWxD)
1.6 x 8.3 x 9 in.
1.6 x 8.3 x 9 in.
1.6 x 8.3 x 9 in.
1.6 x 8.3 x 9 in.
Service Category
1
1
1
1
Feature
Cisco 771M
Cisco 772M
Cisco 775M
Cisco 776M
Fixed LAN Ports
(connections)
4-port Ethernet hub
(10BaseT)
4-port Ethernet hub
(10BaseT)
4-port Ethernet hub
(10BaseT)
4-port Ethernet hub
(10BaseT)
Fixed WAN Ports
(connections)
1-port ISDN BRI (U)
2-port POTS
1-port ISDN BRI (U)
2-port POTS
Modular Slots
None
None
None
None
Processor Speed (type)
25-MHz (80386)
25-MHz (80386)
25-MHz (80386)
25-MHz (80386)
Flash Memory
1 MB
1 MB
1 MB
1 MB
DRAM Memory
1.5 MB (default)
2 MB (maximum)
1.5 MB (default)
2 MB (maximum)
1.5 MB (default)
2 MB (maximum)
1.5 MB (default)
2 MB (maximum)
Dimensions (HxWxD)
1.6 x 8.3 x 9 in.
1.6 x 8.3 x 9 in.
1.6 x 8.3 x 9 in.
1.6 x 8.3 x 9 in.
Service Category
1
1
1
1
Cisco 770 Series
Competitive Products
• 3Com: Office Connect LAN Modems
• Ascend: Pipeline 25/50
• Bay: NetGear RT 328
17
Cisco 700 Series
Cisco IOS Software and Memory Requirements
The Cisco 700 Series in distribution ships with:
• 1-MB Flash memory
• 1.5-MB DRAM memory
To run the Cisco IOS Feature Packs, you need the amount of memory shown in
the following table:
Distribution
Part Number
Feature Pack
Description
IOS Image
Release
Flash Memory
Required
DRAM Memory
Required
CD076-IRX-4.2=
760/776 Internet ready
4.2(3)
1 MB
1.5 MB
CD076-ROX-4.2=
760/776 remote office
4.2(3)
1 MB
1.5 MB
Distribution Part Numbers and Ordering Information
Cisco 700 Series Chassis1
CISCO761M
CISCO762M-US
CISCO765M-US
CISCO765M-G1
CISCO766M-US
CISCO766M-G1
CISCO771M
CISCO772M
CISCO775M
CISCO775M-G1
CISCO775M-G2
CISCO776M
CISCO776M-G1
ISDN Router
ISDN Router w/ NT-1 (North America)
ISDN Router w/ 2 POTS (U.S., MX)
ISDN Router w/ 2 POTS (Canada, NL, TW, SG, KO)
ISDN Router w/ NT-1, 2 POTS, (U.S.)
ISDN Router w/ NT-1, 2 POTS, (Canada.)
ISDN Router w/ 4-Port Hub
ISDN Router w/ NT-1 & w/ 4-Port Hub (North America)
ISDN Router w/ 4-Port Hub, 2 POTS (U.S., MX)
ISDN Router w/ 4-Port Hub, 2 POTS (Canada, NL, TW, SG, KO)
ISDN Router w/ 4-Port Hub, 2 POTS (EURO, AU, HK)
ISDN Router w/ NT-1, 2 POTS, w/ 4-Port Hub (U.S.)
4-port 10mb Hub, 1-port BRI (U) w/ NT1, 2 POTS (Canada, NL, TW, SG
Cisco 700 Series Software Feature Packs
CD076-IRX-4.2=
CD076-ROX-4.2=
Internet Ready Feature Pack for 30 Users with X.25 over B and D Channels
Remote Office Feature Pack for 30 Users with X.25 over B and D Channels
Cisco 700 Series Memory Options
MEM760-512D=
Cisco 700 Series 0.5 MB DRAM Memory
Cisco 700 Series Accessories
CAB-760-CON=
Cisco 700 Series Console Cable
Cisco 700 Series Basic Maintenance
CON-SNT-PKG1
Cisco 700 Series SMARTnet (8 x 5 x NBD)
1. For the latest part number and pricing information, see the Distribution Product Reference Guide Web site:
http://www.cisco.com/dprg. (Only available in some countries at this time; worldwide rollout in place.)
For More Information
See the Cisco 700 Series Web site: http://www.cisco.com/go/700
18
Cisco 800 Series
Cisco 800 Series
The Cisco 800 series routers provide
everything small offices and corporate
telecommuters need for 128-kbps,
ISDN access to the Internet and a
corporate LAN. Incorporating the
proven Cisco IOS technology, the Cisco 800 series offers secure, manageable,
and high-speed solutions for Internet and corporate LAN access.
Those who will especially benefit from the 800 routers are companies who have
invested in Cisco IOS software at the head-end and want to add telecommuters,
service providers who offer value-added services to small offices, and VARs who
are familiar with Cisco IOS software and want a fast, profitable way to service
small office customers.
When to Sell
Sell This Product
Cisco 801
• ISDN Basic Rate Interface (BRI) S/T interface
Cisco 802
• ISDN BRI U interface
• An integrated NT1 network termination device for use in North America
Cisco 803
• ISDN BRI S/T interface
• 4-port Ethernet hub
• 2 RJ-11 interfaces for POTS
Cisco 804
• ISDN BRI U interface
• An integrated NT1 for use in North America
• 4-port Ethernet hub and 2 RJ-11 interfaces for POTS
Key Features
• Cisco IOS technologies
• Enhanced security with route and router authentication, NAT, PAP, CHAP,
D channel dialback, caller ID, access control lists, Lock and Key, Generic
Routing Encapsulation (GRE) tunneling, encryption, and firewall protect
network from unauthorized access
• Remote management and monitoring via SNMP or Telnet and local
management via console port
• Cost control features such as dial-on-demand routing, which dials ISDN
line only when needed then terminates connection at the end of the session
• Ease-of-use features such as telephone interfaces for sharing ISDN line with
telephone, fax, and modems (803 and 804 only) and wizard-based software
that allows users with no technical experience to install, test, troubleshoot,
and activate the router
• Support for telephone features such as caller ID (North America), call
transfer, call conference, call hold, call retrieve, and call waiting
19
Cisco 800 Series
Specifications
Feature
Cisco 801
Cisco 802
Cisco 803
Cisco 804
Fixed LAN Ports
(connections)
1-port Ethernet
(10BaseT)
1-port Ethernet
(10BaseT)
4-port Ethernet hub
(10BaseT)
4-port Ethernet hub
(10BaseT)
Fixed WAN Ports 1-port ISDN BRI (S/T) 1-port ISDN BRI (U) NT-1 1-port ISDN BRI (S/T)
(connections)
2-port POTS
1-port ISDN BRI (U) NT-1
2-port POTS
Modular Slots
None
None
None
Processor Speed 33 MHz (MPC 850)
(type)
None
33 MHz (MPC 850)
33 MHz (MPC 850)
33 MHz (MPC 850)
Flash Memory
8 MB (default)
12 MB (maximum)
8 MB (default)
12 MB (maximum)
8 MB (default)
12 MB (maximum)
8 MB (default)
12 MB (maximum)
DRAM Memory
4 MB (default)
12 MB (maximum)
4 MB (default)
12 MB (maximum)
4 MB (default)
12 MB (maximum)
4 MB (default)
12 MB (maximum)
Power Supply
External
External
External
External
Dimensions
(HxWxD)
2.0 x 9.9 x 8.3 in.
2.0 x 9.9 x 8.3 in.
2.0 x 9.9 x 8.3 in.
2.0 x 9.9 x 8.3 in.
1
1
1
Service Category 1
• 3Com: Office Connect Remote 511/521
• Ascend: Pipeline 75/85
• Bay: Nautica 200
Cisco IOS Software and Memory
• 4-MB DRAM memory
Distribution
Part Number
Feature Pack
Description
IOS Image
Release
Flash Memory
Required
DRAM Memory
Required
CD08-C-12.0=
IP only
12.0(1)XB
4 MB
4 MB
CD08-CI-12.0=
IP for ISPs
12.0(1)XB
4 MB
4 MB
CD08-BP-12.0=
IP/IPX/Plus
12.0(1)XB
4 MB
4 MB
CD08-CX-12.0=
IP/X.25
12.0(1)XB
4 MB
4 MB
20
Cisco 800 Series
Cisco 800 Series Routers1
CISCO801
CISCO802
CISCO803
CISCO804
ISDN Router with IP Feature Set
ISDN Router with NT1 and IP Feature Set
ISDN Router with 2 POTS, 4-Port Hub, and IP Feature Set
ISDN Router with NT1, 2 POTS, 4-Port Hub, and IP Feature Set
CD08-C-12.0=
CD08-CI-12.0=
CD08-CX-12.0=
CD08-BP-12.0=
Cisco 801-804 IOS IP Feature Pack
Cisco 801-804 IOS IP Feature Pack for ISPs
Cisco 801-804 IOS IP/X.25 Feature Pack
Cisco 801-804 IOS IP/IPX/PLUS Feature Pack
Cisco 800 Series Upgrades
MEM800-8F=
MEM800-4D=
MEM800-8D=
Cisco 800 8 MB Flash Mini-Card Memory
Cisco 800 4 MB DRAM,1 inch DIMM Memory
Cisco 800 8 MB DRAM,1 inch DIMM Memory
CON-SNT-PKG1
SMARTnet Maintenance (8x5xNBD)
21
Cisco 1000 Series
Cisco 1000 Series
The Cisco 1000 series of compact,
fixed-configuration desktop routers
provides low-cost, high-speed
connectivity for branch and small
offices. These products offer a range of synchronous and asynchronous WAN
options to address a variety of needs and fit seamlessly into any networking
environment.
When to Sell
Sell This Product
Cisco 1003
• Inexpensive, easy-to-install and manage, multiprotocol routing for small
remote sites
• ISDN (BRI S/T) port, 10BaseT Ethernet port, console port, and slot for a
Flash RAM card
• Software features that extend to support IP, IPX, and AppleTalk routing
Cisco 1004
• The same features as Cisco 1003, plus an integrated NT1 device,
reducing the number of devices needed to connect to ISDN lines in
North America
Cisco 1005
• Inexpensive, fixed configuration, easy to install and manage,
multiprotocol routing for small remote sites
• Serial port with synchronous speeds up to 2.048 Mbps, 10BaseT
Ethernet port, console port, and slot for Flash RAM card
• Software features that extend to support IP, IPX, and AppleTalk routing
Key Features
• Support for Cisco IOS software
• Integration with enterprise networks that are based on asynchronous serial
lines, leased lines, Frame Relay, Switched 56, and X.25 services (Cisco
1005) or ISDN (Cisco 1003 and 1004)
• Flash Memory (PC Card) and primary memory upgrade capability for easy
software image maintenance
• Products tailored for easy inventory, installation, operation, and
maintenance
• Setup with Cisco ConfigMaker, a free tool for configuring a network of
routers
• With CiscoWorks Windows, provides centralized router management and
remote maintenance
22
Cisco 1000 Series
Specifications
Cisco 1003
ISDN Router
Cisco 1004
ISDN Router
Cisco 1005
Serial Router
Fixed LAN Ports
(connections)
1-port Ethernet (10BaseT)
Fixed WAN Ports
(connections)
1-port ISDN BRI (U)
1-port sync serial (DB-60)
Modular Slots
None
None
None
25 MHz (MC68360)
25 MHz (MC68360)
25 MHz (MC68360)
Flash Memory
2 MB (default)
4 MB card optional
2 MB (default)
4 MB card optional
2 MB (default)
4 MB card optional
DRAM Memory
8 MB
8 MB
8 MB
Dimensions (HxWxD)
1.75 x 8 x 8.3 in.
1.75 x 8 x 8.3 in.
1.75 x 8 x 8.3 in.
Service Category
2
2
2
Feature
Distribution
Part Number
Feature Pack
Description
IOS Image
Release
Flash Memory
Required
DRAM Memory
Required1
CD10-C/H-11.3=
IP only
11.3 (5)
2 MB
4 MB
CD10-A/B/E-11.3=
IP/IPX/AT
11.3 (5)
2 MB
8 MB
CD10-AP-11.3=
IP/IPX/AT Plus
11.3 (5)
2 MB
8 MB
CD10-AW-11.3=
IP/IPX/AT/ Plus 40
11.3 (5)
2 MB
8 MB
CD10-AY-11.3=
IP/IPX/AT/ Plus 56
11.3 (5)
2 MB
8 MB
1. Bold numbers indicate that more memory than the default amount is needed to run the Feature Pack.
23
Cisco 1000 Series
CISCO1003-CH
CISCO1004-CH
CISCO1005-CH
1-port 10bT, 1-port BRI (S/T)
1-port 10bT, 1-port BRI (U) w/ NT1
1-port 10bT, 1-port Serial
CD10-C-11.3=
CD10-A/B/E-11.3=
CD10-AP-11.3=
CD10-AW-11.3=
CD10-AY-11.3=
IP Feature Pack
IP/IPX/AppleTalk Feature Pack
IP/IPX/AppleTalk Plus Feature Pack
IP/IPX/AppleTalk Plus with 40-Bit Encryption Feature Pack
IP/IPX/AppleTalk Plus with 56-Bit Encryption Feature Pack
Cisco1000 Series Memory Options
MEM-1000-4MF=
MEM-1000-8MD=
Cisco 1000 Series 4 MB Flash Card for Cisco 1003, 1004, 1005
Cisco 1000 Series 8 MB DRAM SIMM for Cisco 1003, 1004, 1005
CAB-1000-CON=
Cisco 1000 Series Console Cable
CON-SNT-PKG2
Cisco 1000 Series SMARTnet (8 x 5 x NBD)
24
Cisco 1600 Series
Cisco 1600 Series
The Cisco 1600 is the proven
choice for flexible Internet/intranet
access for small branch offices and
small businesses. In addition to one
fixed WAN port and one Ethernet
port, the Cisco 1600 models support one WAN interface card, allowing
customers to add or change WAN ports as needed. WAN options include ISDN,
leased lines (T1/E1), Frame Relay, Switched 56, Switched Multimegabit Data
Service (SMDS), and X.25.
The Cisco 1600 series is part of the Cisco Networked Office stack family of
products designed to provide integrated, secure networking solutions for small
businesses and small branch offices.
When to Sell
Sell This Product
Cisco 1601
• One serial port with synchronous performance up to T1/E1 speeds for
Frame Relay, leased line, Switched 56, SMDS, and X.25 WAN services, or
async performance up to 115.2 kbps
• Higher speeds than ISDN or Switched 56 kbps
Cisco 1602
• A 56-kbps serial port (Frame Relay, leased line, Switched 56, SMDS, and
X.25)
• Low-cost integrated channel service unit (CSU)/data service unit (DSU)
at 56 kbps
• Ability to get CSU/DSU diagnostics information and configuration
remotely via Cisco IOS command-line interface
Cisco 1603 and 1604
• ISDN (BRI) and ISDN leased-line connectivity
• Built-in NT1 for U.S. and Canada (Cisco 1604)
Cisco 1605-R
• Two Ethernet to isolate internal secure LAN from perimeter LAN
(exposed to Internet)
• Single flexible WAN connection (any WAN interface card)
Key Features
• Support for Cisco IOS software
• Modular WAN interface card slot for adding and changing WAN
connections for flexibility and investment protection
• Optional firewall and virtual private network software
• Optional integrated DSU/CSU up to T1 speed and integrated NT1 for
North America
• Flash Memory (PC Card) and primary memory upgrade capability for easy
software image maintenance
• FastStep configuration utility, GUI-based software for easy setup and
troubleshooting
• Setup with Cisco ConfigMaker, a free tool for configuring a network of routers
25
Cisco 1600 Series
Specifications
Feature
Cisco 1601
Cisco 1602
Cisco 1603
Cisco 1604
Cisco 1605-R
Fixed LAN Ports
(connections)
1-port Ethernet
(10BaseT)
1-port Ethernet
(10BaseT)
1-port Ethernet
(10BaseT)
1-port Ethernet
(10BaseT)
2-ports Ethernet
(10BaseT)
Fixed WAN Ports 1-port sync/async
serial
(connections)
1-port sync serial,
56 kbps 4-wire
DSU/CSU
1-port ISDN BRI
(S/T)
1-port ISDN BRI (U) None
WAN Interface
Card Slots
1
1
1
1
WAN Interface
Card Modules
Same as Cisco 1601
1-port ISDN BRI
(S/T)
1-port ISDN BRI (U)
1-port sync/async
serial
1-port serial w/
56/64 CSU
1-port serial w/
FT1/T1 CSU
1
Same as Cisco 1603 Same as Cisco 1601
1-port ISDN BRI
(S/T) for leased line
1-port sync/async
serial
1-port serial w/
56/64 CSU
1-port serial w/
FT1/T1 CSU
Processor Speed 33 MHz (68360)
(type)
33 MHz (68360)
33 MHz (68360)
33 MHz (68360)
33 MHz (68360)
Flash Memory
4 MB (default)
16 MB (max)
4 MB (default)
16 MB (max)
4 MB (default)
16 MB (max)
4 MB (default)
16 MB (max)
2 MB (default)
16 MB (max)
DRAM Memory
2 MB (default)
18 MB (max)
2 MB (default)
18 MB (max)
2 MB (default)
18 MB (max)
2 MB (default)
18 MB (max)
8 MB (default)
24 MB (max)
Dimensions
(HxWxD)
2.19 x 11.15 x 8.67 in. Same as Cisco 1601 Same as Cisco 1601 Same as Cisco 1601 Same as Cisco 1601.
Service Category 2
2
2
2
2
• 3Com: NetBuilder 1xx, 22x, 422
• Ascend: Pipeline 130, 220
• Bay: AN, Nautica Clam
In distribution, the Cisco 1601 through 1604
ship with:
In distribution, the Cisco 1605 ships with:
4-MB Flash memory
2-MB Flash memory
2-MB DRAM memory
8-MB DRAM memory
the following table:.
Product
Flash
IOS Image Memory
Required1
Release
CD16-C-11.3=
IP only
Cisco 1601–1604
Cisco 1601–1604
Cisco 1601–1604
Cisco 1605–R
Cisco 1605–R
Cisco 1605–R
11.2(11)P
11.2(12)P
11.3(3)T
11.2(11)P
11.2(12)P
11.3(3)T
4 MB
4 MB
4 MB
2 MB
2 MB
2 MB
2 MB
2 MB
2 MB
8 MB
8 MB
8 MB
CD16-CH-11.3=
IP/Firewall
Cisco 1601–1604
Cisco 1601–1604
Cisco 1605–R
Cisco 1605–R
11.2(11)P
11.3(3)T
11.2(11)P
11.3(3)T
4 MB
6 MB
2 MB
4 MB
2 MB
4 MB
8 MB
8 MB
Distribution Feature Pack
Part Number Description
26
DRAM
Memory
Required1
CD16-CP-11.3=
IP Plus
Cisco 1601–1604
Cisco 1601–1604
Cisco 1601–1604
Cisco 1605–R
Cisco 1605–R
Cisco 1605–R
11.2(11)P
11.2(12)P
11.3(3)T
11.2(11)P
11.2(12)P
11.3(3)T
6 MB
6 MB
6 MB
4 MB
4 MB
4 MB
4 MB
4 MB
4 MB
8 MB
8 MB
10 MB
CD16-CW-11.3=
IP Plus 40
Cisco 1601–1604
Cisco 1601–1604
Cisco 1605–R
Cisco 1605–R
11.2(9)P
11.3(3)T
11.2(9)P
11.3(3)T
6 MB
6 MB
4 MB
4 MB
4 MB
4 MB
8 MB
10 MB
CD16-CY-11.3=
IP Plus 56
Cisco 1601–1604
Cisco 1601–1604
Cisco 1601–1604
Cisco 1605–R
Cisco 1605–R
Cisco 1605–R
11.2(11)P
11.2(12)P
11.3(3)T
11.2(11)P
11.2(12)P
11.3(3)T
6 MB
6 MB
6 MB
4 MB
4 MB
4 MB
4 MB
4 MB
4 MB
8 MB
8 MB
10 MB
CD16-CL-11.3=
IP Plus IPSec 56
Cisco 1601–1604
Cisco 1605–R
11.3(3)T
11.3(3)T
8 MB
4 MB
4 MB
10 MB
CD16-B-11.3=
IP/IPX
Cisco 1601–1604
Cisco 1601–1604
Cisco 1601–1604
Cisco 1605–R
Cisco 1605–R
Cisco 1605–R
11.2(11)P
11.2(12)P
11.3(3)T
11.2(11)P
11.2(12)P
11.3(3)T
4 MB
4 MB
6 MB
2 MB
2 MB
4 MB
2 MB
2 MB
4 MB
8 MB
8 MB
8 MB
CD16-BP-11.3=
IP/IPX Plus
Cisco 1601–1604
Cisco 1601–1604
Cisco 1601–1604
Cisco 1605–R
Cisco 1605–R
Cisco 1605–R
11.2(11)P
11.2(12)P
11.3(3)T
11.2(11)P
11.2(12)P
11.3(3)T
6 MB
4 MB
6 MB
4 MB
4 MB
4 MB
4 MB
8 MB
4 MB
8 MB
8 MB
10 MB
CD16-BPH-11.3= IP/IPX/Firewall Plus
Cisco 1601–1604
Cisco 1601–1604
Cisco 1605–R
Cisco 1605–R
11.2(11)P
11.3(3)T
11.2(11)P
11.3(3)T
6 MB
6 MB
4 MB
4 MB
4 MB
4 MB
10 MB
10 MB
CD16-Q-11.3=
IP/IPX/AT/IBM
Cisco 1601–1604
Cisco 1605–R
11.3(3)T
11.3(3)T
8 MB
4 MB
4 MB
12 MB
CD16-QP-11.3=
IP/IPX/AT/IBM Plus
Cisco 1601–1604
Cisco 1605–R
11.3(3)T
11.3(3)T
8 MB
4 MB
6 MB
16 MB
CD16-QW-11.3=
IP/IPX/AT/IBM Plus 40
Cisco 1601–1604
Cisco 1605–R
11.3(3)T
11.3(3)T
8 MB
4 MB
6 MB
16 MB
CD16-QY-11.3=
IP/IPX/AT/IBM Plus 56
Cisco 1601–1604
Cisco 1605–R
11.3(3)T
11.3(3)T
8 MB
4 MB
6 MB
16 MB
CD16-QL-11.3=
IP/IPX/AT/IBM Plus IPSec 56
Cisco 1601–1604
Cisco 1605–R
11.3(3)T
11.3(3)T
12 MB
4 MB
6 MB
16 MB
CD16-QHY-11.3= IP/IPX/AT/IBM/Firewall Plus 56
Cisco 1601–1604
Cisco 1601–1604
Cisco 1605–R
Cisco 1605–R
11.2(11)P
11.3(3)T
11.2(11)P
11.3(3)T
8 MB
12 MB
4 MB
4 MB
4 MB
16 MB
12 MB
16 MB
CD16-QHL-11.3= IP/IPX/AT/IBM/Firewall Plus
IPSec 56
Cisco 1601–1604
Cisco 1605–R
11.3(3)T
11.3(3)T
12 MB
4 MB
6 MB
16 MB
Cisco 1600 Series
Product
Flash
IOS Image Memory
Release
Required1
DRAM
Memory
Required1
27
Cisco 1600 Series
CISCO1601-CH
CISCO1602-CH
CISCO1603-CH
CISCO1604-CH
CISCO160 R-CH
1-port 10bT, 1-port Serial, 1 WIC slot
1-port 10bT, 1-port Serial w/ 56K DSU, 1 WIC slot
1-port 10bT, 1-port BRI (S/T), 1 WIC slot
1-port 10bT, 1-port BRI (U) w/ NT-1, 1 WIC slot
2-port 10bT, 1 WIC slot
Cisco 1600 Series WAN Interface Cards (WICs)
WIC-1B-S/T=
WIC-1B-U=
WIC-1B-S/T-LL=
WIC-1DSU-56K4=
WIC-1DSU-T1=
WIC-1T=
1-port BRI (S/T) WAN Interface Card- Dial & Leased Line
1-port BRI (U) w/ NT-1 WAN Interface Card- Dial & Leased Line
1-port BRI Leased Line WAN Interface Card- 1603/1604 only
1-port Serial w/ 4-Wire 56/64Kbps DSU/CSU WAN Interface Card
1-port Serial w/ Fractional T1/T1DSU/CSU WAN Interface Card
1-port Serial WAN Interface Card
CD16-C-11.3=
CD16-CH-11.3=
CD16-CP-11.3=
CD16-CW-11.3=
CD16-CY-11.3=
CD16-CL-11.3=
CD16-B-11.3=
CD16-BHP-11.3=
CD16-BP-11.3=
CD16-Q-11.3=
CD16-QP-11.3=
CD16-QW-11.3=
CD16-QY-11.3=
CD16-QHY-11.3=
CD16-QL-11.3=
CD16-QHL-11.3=
IP Feature Pack
IP/Firewall Feature Pack
IP Plus Feature Pack
IP Plus 40 Feature Pack
IP Plus IPSec 56 Feature Pack
IP/IPX Feature Pack
IP/IPX/Firewall Plus Feature Pack
IP/IPX Plus Feature Pack
IP/IPX/AT/IBM Feature Pack
IP/IPX/AT/IBM Plus Feature Pack
IP/IPX/AT/IBM Plus 40 Feature Pack
IP/IPX/AT/IBM Plus 56 Feature Pack
IP/IPX/AT/IBM/Firewall Plus 56 Feature Pack
P/IPX/AT/IBM Plus IPSec 56 Feature Pack
IP/IPX/AT/IBM/Firewall Plus IPSec 56 Feature Pack
Cisco1600 Series Memory Options
MEM1600-4FC=
MEM1600-6FC=
MEM1600-8FC=
MEM1600-12FC=
MEM1600-16FC=
MEM1600-2D=
MEM1600-4D=
MEM1600-8D=
MEM1600-16D=
Cisco 1600 Series 4 MB Flash Card
Cisco 1600 Series 2 MB DRAM SIMM
CAB-1600-CON=
CAB-V35MT=
CAB-V35FC=
CAB-232MT=
CAB-232FC=
CAB-449MT=
CAB-449FC=
CAB-X21MT=
CAB-X21FC=
CAB-530MT=
PWR-1600-WW1=
Cisco 1600 Console Cable
V.35 Cable, DTE, Male, 10 Feet
V.35 Cable, DCE, Female, 10 Feet
EIA/TIA-232 Cable, DTE, Male, 10 Feet
EIA/TIA-232 Cable, DCE, Female, 10 Feet
X.21 Cable, DTE, Male, 10 Feet
X.21 Cable, DCE, Female, 10 Feet
Male DTE EIA/TIA-530 Cable, 10 Feet
Cisco 1600 AC Power Supply - Worldwide
CON-SNT-PKG2
Cisco 1600 Series SMARTnet Maintenance
28
Cisco 1720 VPN Access Router
Extending the success of the Cisco
1600 Series, the Cisco 1720 Virtual
Private Network (VPN) Access Router
delivers a flexible, integrated solution
for small/medium businesses and small
branch offices that want to deploy secure Internet/intranet access and VPNs.
The Cisco 1720 access router is a modular solution that provides all the
necessary components required to build a VPN, including the access router,
high-speed encryption, VPN tunnel server, and robust security features
including support for IPSec and an optional firewall. This “all-in-one” solution
enables you minimize your setup costs and reduce the ongoing time and expense
required to manage the network.
The Cisco 1720 is part of the Cisco Networked Office stack family of products
designed to provide integrated, secure networking solutions for small businesses
and small branch offices.
When to Sell
Sell This Product
Cisco 1720
• An integrated routing solution that delivers optimized security and
flexibility in a desktop form factor for small/medium businesses or small
branch offices interested in deploying internet/intranet access and
VPNs
• Modular WAN slots to support future growth by providing upgradeable
WAN services and higher densities of WAN connections
• Support for encrypted WAN performance greater than 128 kbps
• Router configurations that require two ISDN BRI interfaces
• An autosensing 10/100 Mbps Fast Ethernet LAN connection to provide
easy upgrade to Fast Ethernet
Key Features
• Cisco IOS software
• Two modular WAN slots that support 1600, 2600, and 3600 data WIC
cards for flexibility and investment protection
• Support for up to four serial interfaces or two ISDN BRI
• One autosensing 10/100 Mbps Fast Ethernet LAN connection
• One auxiliary (AUX) port for dial-up management or low speed
asynchronous connections (up to 112.5 kbps)
• An expansion slot on the motherboard to support future services such as
hardware-assisted encryption and compression
• Optional integrated DSU/CSU up to T1 speed and integrated NT1 for
North America
• Optional integrated Cisco IOS Firewall and virtual private network
software for encryption, tunneling and quality of service
29
Specifications
Feature
Cisco 1720
Fixed LAN Ports (connections)
1-port autosensing 10/100 Mbps Ethernet
(10/100BaseT)
Fixed WAN Ports
None
Modular WAN Slots
2
WAN Interface Cards (WIC)
1-port serial sync/async
2-port serial sync/async
2-port low-speed serial (up to 128 kbps)
1-port ISDN BRI S/T
1-port ISDN BRI U with integrated NT-1
1-port serial with integrated 56/64 kbps DSU/CSU
1-port serial with integrated T1/Fractional T1 DSU/CSU
50 MHz (Motorola MPC860T Power QUICC)
Flash Memory
4 MB (default)
16 MB (max)
DRAM Memory
16 MB (default)
48 MB (max)
Dimensions (HxWxD)
3.1 x 11.2 x 8.7 in.
Service Category
4
• 3Com: OfficeConnect NetBuilder
• Ascend: Pipeline 130
• Bay: AN
• Freegate: Multiservice Internet Gateway
30
CISCO1720
1-port 10/100 (autosensing), 2 WAN slots
CD17-C-12.0X=
CD17-CH-12.0X=
CD17-CHL-12.0X=
CD17-B-12.0X=
CD17-Q-12.0X=
IP only Feature Set
IP/Firewall Feature Set
IP/Firewall Plus IPSec 56 Feature Set
IP/IPX Feature Set
IP/IPX/AT/IBM Feature Set
MEM-1700-4MFC=
MEM-1700-8MFC=
MEM-1700-16MFC=
MEM-1700-4D=
MEM-1700-8D=
MEM-1700-16D=
MEM-1700-32D=
Cisco 1700 Series 4 MB Mini-Flash Card
Cisco 1700 Series 4 MB DRAM DIMM
PWR-1700WW1=
CAB1700-CON=
Cisco 1700 AC Power Supply - Worldwide
Cisco 1700 Console Cable
CON-SNT-PKG4
See the Cisco 1720 Web site: http://www.cisco.com/go/1700
31
Cisco 2500 Series
Cisco 2500 Series
The Cisco 2500 series of routers,
the world’s most popular brand of
branch office router, provides a
variety of models. These routers
are typically fixed configuration with at least two of the following interfaces:
Ethernet Token Ring, synchronous serial, asynchronous serial, ISDN BRI, and
hub. Two modular models are also available.
When to Sell
Sell This Product
Cisco 2500 Series
• Data-only network requirement
Cisco 2501, 2502, 2503,
2504
• Multiprotocol routing between WANs and LANs
• A single Ethernet LAN and dual serial ports (Cisco 2501, 2503)
• A single Token Ring LAN and dual serial ports (Cisco 2502, 2504)
• An ISDN BRI S/T interface (Cisco 2503, 2504)
Cisco 2513, 2514, 2515
• Dual LAN configuration for network segmentation or security (physical
firewall)
• A single Ethernet port, a single Token Ring port, and dual serial ports
(Cisco 2513)
• Dual Ethernet ports and dual serial ports (Cisco 2514)
• Dual Token Ring and dual serial ports (Cisco 2515)
Cisco 2505, 2507, 2516
• Multiprotocol routing with integrated 10BaseT hubs and dual serial
ports
• An ISDN BRI S/T interface (Cisco 2516)
Cisco 2509, 2511, 2512,
AS2509-RJ, AS2511-RJ
• An access server combining a terminal server, protocol translator, and
a router in a single device
• One Ethernet LAN and dual serial ports
• One Token Ring and two synch serial ports (Cisco 2512)
• 8- or 16-port asynchronous
• External cable assembly (Cisco 2509, 2511)
• RJ-11 jacks integrated in unit (AS2509-RJ, AS2511-RJ)
Cisco 2520, 2521, 2522,
2523
• WAN aggregation routers that can be used as communication servers
• A single Ethernet LAN, ISDN BRI S/T, and dual sync/multiple sync/async
serial ports (Cisco 2520, 2522)
• A single Token Ring LAN, ISDN BRI S/T, and dual sync/multiple
sync/async serial ports (Cisco 2521, 2523)
• High-density asynchronous ports (Cisco 2522, 2523)
Cisco 2524, 2525
• Modular WAN connectivity for flexibility to support Switched 56,
fractional T1/T1, sync serial, and ISDN
Key Features
• Proven technology with a full suite of Cisco IOS software
• Setup with Cisco ConfigMaker, a free tool for configuring a network of
routers
• With CiscoWorks Windows, allows remote management and maintenance
from a central location
32
Cisco 2500 Series
Specifications
Cisco 2500 Series—All Models
Feature
Specifications
Processor Speed (type) 20 MHz (68030)
Flash Memory
8-MB dual Flash bank option (default)
16 MB (max)
DRAM Memory
4 MB, upgrades to 8 or 16 MB
Power Supply
AC, with optional DC or redundant power supply (RPS)
Cisco 2500 Series—Single LAN Routers (fixed configurations)
Feature
Cisco 2501
Cisco 2502
Cisco 2503
Fixed LAN Ports
1-port Ethernet
1-port Token Ring
1-port Ethernet
Cisco 2504
1-port Token Ring
Fixed WAN Ports
2-port sync serial
2-port sync serial
2-port sync serial
2-port sync serial
Slots
None
None
None
None
Dimensions (HxWxD)
1.75 x 17.5 x 10.56 in.
1.75 x 17.5 x 10.56 in.
1.75 x 17.5 x 10.56 in.
1.75 x 17.5 x 10.56 in.
Service Category
4
4
4
4
Cisco 2500 Series—Router/Hub Combinations (fixed configurations)
Feature
Cisco 2505
Cisco 2507
Cisco 2516
Fixed LAN Ports
8-port Ethernet hub
16-port Ethernet hub
14-port Ethernet hub
Fixed WAN Ports
(connections)
2-port sync serial
2-port sync serial
2-port sync serial
Slots
None
None
None
Dimensions (HxWxD)
1.75 x 17.5 x 10.56 in.
1.75 x 17.5 x 10.56 in.
1.75 x 17.5 x 10.56 in.
Service Category
4
4
5
Cisco 2500 Series—Access Servers (fixed configurations)
Feature
AS 2509-RJ
Cisco 2511
AS 2511-RJ
Cisco 2512
Fixed LAN Ports 1-port Ethernet
(connections)
Cisco 2509
1-port Ethernet
1-port Ethernet
1-port Ethernet
1-port Token Ring
Fixed WAN Ports 2-port sync serial
(connections)
8-port async
1-port sync serial
8-port async
2-port sync serial
16-port async
1-port sync serial
16-port async
2-port sync serial
Slots
None
None
None
None
None
Dimensions
(HxWxD)
1.75 x 17.5 x 10.56 in. 1.75 x 17.5 x 10.56 in. 1.75 x 17.5 x 10.56 in. 1.75 x 17.5 x 10.56 in. 1.75 x 17.5 x 10.56 in.
Service Category 4
4
4
4
4
33
Cisco 2500 Series
Cisco 2500 Series—High-Density Serial Routers (fixed configurations)
Feature
Cisco 2521
Cisco 2522
Cisco 2520
1-port Token Ring
1-port Ethernet
1-port Token Ring
Fixed WAN Ports 2-port high-speed sync
serial
(connections)
Same as Cisco 2520
2-port sync serial
8-port sync/async serial
Same as Cisco 2522
2-port low-speed
sync/async serial
Cisco 2523
Slots
None
None
None
None
Dimensions
(HxWxD)
1.75 x 17.5 x 10.56 in.
1.75 x 17.5 x 10.56 in.
1.75 x 17.5 x 10.56 in.
1.75 x 17.5 x 10.56 in.
Service
Category
4
4
4
5
Cisco 2500 Series—Dual LAN Routers (fixed configurations)
Feature
Cisco 2513
Cisco 2514
Cisco 2515
Fixed LAN Ports
1-port Ethernet
1-port Token Ring
2-port Ethernet
2-port Token Ring
Fixed WAN Ports
2-port sync serial
2-port sync serial
2-port sync serial
Slots
None
None
None
Dimensions (HxWxD)
1.75 x 17.5 x 10.56 in.
1.75 x 17.5 x 10.56 in.
1.75 x 17.5 x 10.56 in.
Service Category
4
4
5
Cisco 2500 Series—Single LAN Routers (modular configurations)
Feature
Cisco 2524
Fixed LAN Ports
1-port Ethernet
1-port Token Ring
Fixed WAN Ports
None
None
LAN Modules
None
None
WAN Modules
1-port ISDN BRI (S/T) or 1-port ISDN BRI (U)
Plus any two of the following:
1-port 2-wire Switched 56 DSU/CSU
1-port 4-wire 56K/64K DSU/CSU
1-port fractional/full T1 DSU/CSU
1-port sync serial (5-in-1 cable adapter)
Same as Cisco 2524
Dimensions (HxWxD)
1.75 x 17.5 x 10.56 in.
1.75 x 17.5 x 10.56 in.
Service Category
5
5
• 3Com: SuperStack II
34
Cisco 2525
Cisco 2500 Series
Cisco IOS Software and Memory
The 2500 Series in distribution ships with:
IOS Image
Release
Flash Memory
Required1
DRAM Memory
Required1
CD25-C-11.3=
IP only
11.0(18)
11.2(9)
11.2(11)P
11.3(3)
11.3(3)T
8 MB
8 MB
8 MB
8 MB
8 MB
4 MB
4 MB
4 MB
4 MB
4 MB
CD25-CH-11.3=
IP/Firewall
11.2(11)P
11.3(3)T
8 MB
8 MB
4 MB
4MB
CD25-CP-11.3=
IP Plus
11.0(18)
11.2(9)
11.2(11)P
11.3(3)
11.3(3)T
8 MB
8 MB
8 MB
8 MB
8 MB
4 MB
4 MB
4 MB
4 MB
4 MB
CD25-CW-11.3=
IP Plus 40
11.2(7a)
11.2(9)
11.2(11)P
11.3(3)
11.3(3)T
8 MB
8 MB
8 MB
8 MB
8 MB
4 MB
4 MB
4 MB
4 MB
4 MB
CD25-CY-11.3=
IP Plus 56
11.2(7a)
11.2(9)
11.2(11)P
11.3(3)
11.3(3)T
8 MB
8 MB
8 MB
8 MB
8 MB
4 MB
4 MB
4 MB
4 MB
4 MB
CD25-CL-11.3=
IP Plus IPSec 56
11.3(3)T
8 MB
4 MB
CD25-B-11.3=
IP/IPX/AT/DEC
11.0(18)
11.2(9)
11.2(11)P
11.3(3)
11.3(3)T
8 MB
8 MB
8 MB
8 MB
8 MB
4 MB
4 MB
4 MB
4 MB
4 MB
CD25-BP-11.3=
IP/IPX/AT/DEC Plus
11.0(18)
11.2(9)
11.2(11)P
11.3(3)
11.3(3)T
8 MB
8 MB
8 MB
8 MB
8 MB
4 MB
4 MB
4 MB
6 MB
6 MB
CD25-BHP-11.3= IP/IPX/AT/DEC/Firewall Plus
11.2(11)P
11.3(3)T
16 MB
16 MB
4 MB
6 MB
CD25-AP-11.3=
Enterprise Plus
11.0(18)
11.2(9)
11.2(11)P
11.3(3)
11.3(3)T
8 MB
8 MB
8 MB
16 MB
16 MB
6 MB
6 MB
6 MB
6 MB
6 MB
CD25-AW-11.3=
Enterprise Plus 40
11.2(7a)
11.2(9)
11.2(11)P
11.3(3)
11.3(3)T
8 MB
8 MB
8 MB
16 MB
16 MB
6 MB
6 MB
6 MB
8 MB
8 MB
CD25-AY-11.3=
Enterprise Plus 56
11.2(7a)
11.2(9)
11.2(11)P
11.3(3)
11.3(3)T
8 MB
8 MB
8 MB
16 MB
16 MB
6 MB
6 MB
6 MB
8 MB
8 MB
CD25-AL-11.3=
Enterprise Plus IPSec 56
11.3(3)T
16 MB
8 MB
35
Cisco 2500 Series
IOS Image
Release
Flash Memory
Required1
DRAM Memory
Required1
CD25-AHY-11.3= Enterprise/Firewall Plus 56
11.2(11)P
11.3(3)T
16 MB
16 MB
6 MB
8 MB
CD25-AHL-11.3= Enterprise/Firewall Plus
IPSec 56
11.3(3)T
16 MB
8 MB
CD25-E-11.3=
11.0(18)
11.2(9)
11.2(11)P
11.3(3)T
8 MB
8 MB
8 MB
8 MB
4 MB
4 MB
4 MB
6 MB
Remote access server
Cisco 2500 Series Router Chassis1
CISCO2501-CH
CISCO2502-CH
CISCO2503-CH
CISCO2504-CH
CISCO2505-CH
CISCO2507-CH
CISCO2513-CH
CISCO2514-CH
CISCO2515-CH
CISCO2516-CH
CISCO2520-CH
CISCO2521-CH
CISCO2522-CH
CISCO2523-CH
CISCO2524-CH
CISCO2525-CH
1-port Token Ring, 2-port Serial
1-port 10bT, 2-port Serial, 1-port BRI (S/T)
1-port Token Ring, 2-port Serial, 1-port BRI (ST)
8-port 10bT hub, 2-port Serial
16-port 10bT hub, 2-port Serial
1-port 10bT, 1-port Token Ring, 2-port Serial
2-port Token Ring, 2-port Serial
14-port 10bT hub, 2-port Serial, 1-port BRI (S/T)
1-port 10bT, 2-port Serial, 1-port BRI (S/T), 2-port Async/Sync Serial
1-port Token Ring, 2-port Serial, 1-port BRI (S/T), 2-port Async/Sync Serial
1-port 10bT, 2-port Serial, 1-port BRI (S/T), 8-port Async/Sync Serial
1-port Token Ring, 2-port Serial, 1-port BRI (S/T), 8-port Async/Sync Serial
1-port 10bT, 1 BRI slot, 2 Serial slots
1-port Token Ring, 1 BRI slot, 2 Serial slots
Cisco 2524/2525 WAN Modules
SM25-BRI-S/T=
SM25-BRI-U=
SM25-56K2=
SM25-56K4=
SM25-T1=
SM25-5IN1=
2524/25 1-port BRI (S/T) Module
2524/25 1-port BRI (U) w/ NT-1 Module
2524/25 1-port Serial w/ 2-Wire 56Kbps DSU/CSU Interface Module
2524/25 1-port Serial w/ 4-Wire 56/64Kbps DSU/CSU Interface Module
2524/25 1-port Serial w/ Fractional T1/T1 DSU/CSU Module
2524/25 1-port Serial 5-in-1 Interface Module
Cisco 2500 Series Access Router Chassis
CISCO2509-CH
AS2509-RJ-CH
CISCO2511-CH
AS2511-RJ-CH
1-port 10bT, 2-port Serial, 8-port Async Serial
1-port 10bT (RJ-45), 1-port Serial, 8-port Async Serial
1-port 10bT, 2-port Serial, 16-port Async Serial
1-port 10bT (RJ-45), 1-port Serial, 16-port Async Serial
CD25-C-11.3=
CD25-CH-11.3=
CD25-CP-11.3=
CD25-CW-11.3=
CD25-CY-11.3=
CD25-CL-11.3=
CD25-B-11.3=
CD25-BHP-11.3=
CD25-BP-11.3=
CD25-AP-11.3=
CD25-AW-11.3=
CD25-AY-11.3=
CD25-AHL-11.3=
CD25-AL-11.3=
CD25-AHY-11.3=
CD25-E-11.3=
IP Feature Pack
IP/IPX/AT/DEC Feature Pack
IP/IPX/AT/DEC/Firewall Plus
IP/IPX/AT/DEC Plus Feature Pack
Enterprise Plus Feature Pack
Enterprise Plus 40 Feature Pack
Enterprise Plus 56 Feature Pack
Enterprise/Firewall Plus IPSec 56 Feature Pack
Enterprise Plus IPSec 56 Feature Pack
Enterprise/Firewall Plus 56 Feature Pack
Remote Access Server Feature Pack
MEM-1X4F=
MEM-1X8F=
36
Cisco 2500 Series 4 MB Flash Upgrade
Cisco 2500 Series 8 MB Flash Upgrade
Cisco 2500 Series
MEM-1X8D=
MEM-1X16D=
Cisco 2500 Series 8 MB DRAM Upgrade
Cisco 2500 Series 16 MB DRAM Upgrade
ACS-2500RM-19=
ACS-2500RM-24=
ACS-2500ASYN=
ACS-2500RPS=
CAB-RPS-2208=
CAB-RPSY-2208=
Rack-Mount Kit, 19 Inches
Rack-Mount Kit, 24 Inches
AUX/Console Part Cable Kit
RPS Field Upgrade for 2500
RPS 22/08 Load Cable
RPS 22/08 Two-to-One DC Power Cable
CON-SNT-PKG4
CON-SNT-PKG5
Cisco 2500 Series (2501-2514, 2520-2522) SMARTnet (8 x 5 x NBD)
Cisco 2500 Series (2515, 2516, 2523-2525) SMARTnet (8 x 5 x NBD)
37
Cisco 2600 Series
Cisco 2600 Series
Cisco Systems extends
enterprise-class versatility,
integration, and power to branch
offices with the Cisco 2600 series.
The Cisco 2600 series' modular architecture provides the versatility needed to
adapt to changes in network technology as new services and applications
become available. Driven by a powerful RISC processor, the Cisco 2600 series
supports advanced Quality of Service (QoS), security, and network integration
features required in today's evolving networks. By integrating the functions of
multiple separate devices into a single unit, the Cisco 2600 Series reduces the
complexity of managing remote networks. The Cisco 2600 series shares
modular interfaces with the Cisco 1600, 1720, and 3600 series, providing a
cost-effective solution for applications such as Internet/intranet access,
multiservice voice/data integration, analog and digital dial access services, VPN
access, VLANs, and routing bandwidth management.
When to Sell
Sell This Product
Cisco 2600 Series
• LAN to LAN routing, including bandwidth management
• Remote access server (analog and digital dial services)
• Multiservice voice/fax/data integration
• VPN/Extranet with Firewall Security
• Serial device concentration
Cisco 2610
• One Ethernet port
Cisco 2611
• Two Ethernet ports for LAN segmentation or secure LAN isolation
Cisco 2612
• One Token Ring port and one Ethernet port for mixed LANs and migrating
from Token Ring to Ethernet
Cisco 2613
• One Token Ring port
Cisco 2620
• One autosensing 10/100 Mbps Ethernet port with ISL VLAN support
Cisco 2621
• Two autosensing 10/100 Mbps Ethernet ports with ISL VLAN support
Key Features
• Versatility/investment protection—field-upgradable modular interfaces
enable thousands of customized solutions and easy migration to future
network requirements
• Integration/manageability—lowers cost of ownership and improves ease of
remote management, providing integrated “branch-in-a-box” networking
that combines CSU/DSUs, multiplexors, modems, ISDN NT1s,
compression, encryption devices, VPN/firewalls, and voice/data gateways
• Multiservice voice/data networks—reduces phone costs between offices;
using Cisco IOS QoS features (such as RSVP, WFQ, committed access rate
[CAR], and Random Early Detection [RED]), voice traffic is digitized and
encapsulated in IP packets and consolidated with data traffic
38
Cisco 2600 Series
Specifications
Feature
Cisco 2610
Cisco 2611 Cisco 2612 Cisco 2613 Cisco 2620 Cisco 2621
(connections) (RJ-45)
2-port Ethernet 1-port Ethernet 1-port Token
(RJ-45)
1-port Token Ring
Ring
Fixed WAN
Ports
1-async only (aux port)
Same as Cisco Same as Cisco Same as Cisco Same as Cisco Same as Cisco
2610
2610
2610
2610
2610
Network
Module Slots
1
1
1
1
1
1
WAN Interface 2
Card Slots
2
2
2
2
2
Advanced
Integration
Slots (AIM)
1
1
1
1
1
1
WAN Interface 1-port ISDN BRI (S/T)
Card Modules 1-port ISDN BRI (U)
1-port 10/100 2-port 10/100
Mbps Ethernet Mbps Ethernet
2610
2610
2610
2610
2610
1-port sync serial
1-port 4-wire 56/64-kbps
CSU/DSU
1-port T1/FT1 CSU/DSU
LAN Modules
1- and 4-port Ethernet
10BaseT
1-port ATM-25
2610
2610
2610
2610
2610
WAN Modules 4-port BRI (S/T)
2610
2610
2610
2610
2610
8-port BRI (S/T)
4-port BRI (U) w/ NT1
8-port BRI (U) w/ NT1
4-port Async/Sync Serial
16-port Async Serial
32-port Async Serial
1-port Channelized T1/PRI
w/ CSU
w/ CSU
Voice/Fax
Modules
1- or 2-slot voice/fax
Voice Interface 2-port voice—FXS
Card Modules 2-port voice—E&M
2610
2610
2610
2610
2610
2610
2610
2610
2610
2610
2-port voice—FXO
Modem
Modules
8- and 16-port analog
2610
2610
2610
2610
2610
Data Compression AIM
Advanced
(8 Mbps)
Integration
Modules (AIM)
2610
2610
2610
2610
2610
Processor
Speed (type)
40-MHz (RISC)
Same as Cisco Same as Cisco Same as Cisco 50-MHz (RISC) 50-MHz (RISC)
2610
2610
2610
Flash Memory
8 MB (default)
16 MB (max)
2610
2610
2610
2610
2610
DRAM Memory 24 MB (default)
64 MB (max)
2610
2610
2610
2610
2610
Power Supply
AC, DC optional, redundant Same as Cisco Same as Cisco Same as Cisco Same as Cisco Same as Cisco
power (external unit)
2610
2610
2610
2610
2610
Dimensions
(HxWxD)
1.69 x 17.5 x 11.8 in.
2610
2610
2610
2610
2610
Service
Category
5
5
5
5
5
5
39
Cisco 2600 Series
• 3Com: SuperStack II NetBuilder SI
• Bay: ARN
• Motorola: Vanguard 6450/6430
• Shiva: LanRover Family
the following table. Note that the Cisco 2620, Cisco 2621, and the Data
Compression AIM module require IOS version 12.0(2) or later, which will ship
in January 1999. Currently, Cisco IOS version 11.3(4)T1 ships on all Cisco
2600 CD Feature Packs.
Distribution
Part Number
Feature Pack Description
CD26-C-12.0=
IP only
CD26-CP-12.0=
IP Plus
CD26-CW-12.0=
IP Plus 40
CD26-CH-12.0=
CD26-CHL-12.0=
CD26-CL-12.0=
IP/Firewall with NAT
IP/Firewall Plus IPSec 56
IP Plus IPSec 56
CD26-B-12.0=
IP/IPX/AT/DEC
CD26-BP-12.0=
IP/IPX/AT/DEC Plus
CD26-BHP-12.0=
CD26-AP-12.0=
Enterprise Plus
CD26-AL-12.0=
Enterprise Plus IPSec 56
CD26-AHL-12.0=
CD26-ANP-12.0=
Enterprise/Firewall Plus IPSec 56
Enterprise/APPN Plus
CD26-ANL-12.0=
Enterprise/APPN Plus IPSec 56
CD26-E-12.0=
Remote Access Server
IOS Image
Release
Flash Memory
Required1
DRAM Memory
Required1
11.3(4)T1
11.3(6)T
12.0(2)
11.3(4)T1
11.3(6)T
12.0(2)
111.3(4)T1
11.3(6)T
12.0(2)
12.0(2)
12.0(2)
11.3(4)T1
11.3(6)T
12.0(2)
11.3(4)T1
11.3(6)T
12.0(2)
11.3(4)T1
11.3(6)T
12.0(2)
12.0(2)
11.3(4)T1
11.3(6)T
12.0(2)
11.3(4)T1
11.3(6)T
12.0(2)
12.0(2)
11.3(4)T1
11.3(6)T
12.0(2)
11.3(4)T1
11.3(6)T
12.0(2)
11.3(4)T1
11.3(6)T
12.0(2)
4 MB
4 MB
4 MB
8 MB
8 MB
8 MB
8 MB
8 MB
8 MB
4 MB
8 MB
8 MB
8 MB
8 MB
8 MB
8 MB
8 MB
8 MB
8 MB
8 MB
8 MB
8 MB
8 MB
8 MB
8 MB
8 MB
8 MB
8 MB
8 MB
8 MB
8 MB
16 MB
16 MB
16 MB
4 MB
4 MB
4 MB
16 MB
16 MB
20 MB
20 MB
24 MB
24 MB
24 MB
24 MB
24 MB
20 MB
24 MB
24 MB
24 MB
24 MB
20 MB
20 MB
20 MB
24 MB
24 MB
24 MB
24 MB
24 MB
24 MB
32 MB
32 MB
32 MB
32 MB
32 MB
32 MB
32 MB
32 MB
32 MB
32 MB
32 MB
16 MB
16 MB
16 MB
40
Cisco 2600 Series
CISCO2610
CISCO2610-DC
CISCO2610-RPS
CISCO2611
CISCO2611-DC
CISCO2611-RPS
CISCO2612
CISCO2612-DC
CISCO2612-RPS
CISCO2613
CISCO2613-DC
CISCO2613-RPS
CISCO2620
CISCO2620-DC
CISCO2620-RPS
CISCO2621
CISCO2621-DC
CISCO2621-RPS
Ethernet Modular Router w/ Cisco IOS IP Software
Ethernet Modular Router w/ Cisco IOS IP Software - DC
Ethernet Modular Router w/ Cisco IOS IP, use w/ ext RPS
Dual Ethernet Modular Router w/ Cisco IOS IP Software
Dual Ethernet Modular Router w/ Cisco IOS IP Software - DC
Dual Ethernet Modular Router w/ Cisco IOS IP, use w/ ext RPS
Ethernet/Token-Ring Modular Router w/ IP IOS Software
Ethernet/Token-Ring Modular Router w/ IP IOS Software - DC
Ethernet/Token-Ring Modular Router w/ IP IOS Software - RPS
Token-Ring Modular Router w/ IP IOS Software
Token-Ring Modular Router w/ IP IOS Software - DC
Token-Ring Modular Router w/ IP IOS Software - RPS
10/100 Mbps Ethernet Modular Router w/ Cisco IOS IP Software
10/100 Mbps Ethernet Modular Router w/ Cisco IOS IP Software - DC
10/100 Mbps Ethernet Modular Router w/ Cisco IOS IP, use w/ ext RPS
Dual 10/100 Ethernet Modular Router w/ Cisco IOS IP Software
Dual 10/100 Ethernet Modular Router w/ Cisco IOS IP Software - DC
Dual 10/100 Ethernet Modular Router w/ Cisco IOS IP, use w/ ext RPS
CD26-C-12.0=
CD26-CP-12.0=
CD26-CW-12.0=
CD26-CH-12.0=
CD26-CHL-12.0=
CD26-CY-12.0=
CD26-CL-12.0=
CD26-B-12.0=
CD26-BP-12.0=
CD26-BHP-12.0=
CD26-AP-12.0=
CD26-AL-12.0=
CD26-AHL-12.0=
CD26-ANP-12.0=
CD26-ANL-12.0=
CD26-E-12.0=
IP Feature Pack
IP/Firewall with NAT
IP/Firewall Plus IPSec 56
IP/IPX/AT/DEC Feature Pack
IP/IPX/AT/DEC Plus Feature Pack
Enterprise Plus IPSec 56 Feature Pack
Enterprise/Firewall Plus IPSec 56
Enterprise/APPN Plus Feature Pack
Enterprise/APPN Plus IPSec 56 Feature Pack
Remote Access Server Feature Pack
Cisco 2600 Series Modem Management Technology Licenses
MMTL-3600/2600-8=
MMTL-3600/2600-16=
Modem Management Technology License for 8 Analog Modems
MEM2600-4F=
MEM2600-8F=
MEM2600-16F=
MEM2600-4U8FS=
MEM2600-4U16FS=
MEM2600-8U16FS=
MEM2600-4D=
MEM2600-8D=
MEM2600-16D=
MEM2600-32D=
MEM2600-24U32D=
MEM2600-24U48D=
Cisco 2600 Series 4 MB Flash SIMM-Spare
Cisco 2600 Series 4 to 8 MB Flash Memory Upgrade
Cisco 2600 Series 4 to 16 MB Flash Memory Upgrade
Cisco 2600 Series 8 to 16 MB Flash Upgrade SIMM for new Cisco 2600 orders
Cisco 2600 Series 4 MB DRAM DIMM-Spare
Cisco 2600 Series 24 to 32 MB DRAM Upgrade DIMM for new Cisco 2600 orders
Cisco 2600 Series 24 to 48 MB DRAM Upgrade DIMM for new Cisco 2600 orders
Cisco 2600 Series WAN Modules
NM-4B-S/T
NM-8B-S/T
NM-4B-U
NM-8B-U
NM-4A/S=
NM-8A/S=
NM-16A=
NM-32A=
NM-1CT1
NM-2CT1
4-port BRI (S/T) Module
4-port BRI (U) w/ NT1 Module
8-port BRI (U) w/ NT1 Module
4-port Async/Sync Serial Module
16-port Async Serial Module
32-port Async Serial Module
1-port Channelized T1/PRI Module
41
Cisco 2600 Series
NM-1CT1-CSU
NM-2CT1-CSU
1-port Channelized T1/PRI w/ CSU Module
2-port Channelized T1/PRI w/ CSU Module
Cisco 2600 Series LAN Modules
NM-1E=
NM-4E=
NM-ATM-25=
1-port Ethernet Module
4-port Ethernet Module
1-port ATM-25 Module
Cisco 2600 Series Modem Modules
NM-8AM=
NM-16AM=
8-port Analog Modem Module
Cisco 2600 Series Voice/Fax Modules
NM-1V=
NM-2V=
1-Slot Voice/fax Network Module
2-Slot Voice/fax Network Module
Cisco 2600 Series VICs for Voice/Fax Network Modules
VIC-2FXS=
VIC-2FXO=
VIC-2E/M=
2-port Voice Interface Card - FXS
2-port Voice Interface Card - FXO
2-port Voice Interface Card - E&M
WIC-1B-S/T=
WIC-1B-U=
WIC-1DSU-56K4=
WIC-1DSU-T1=
WIC-1T=
WIC-2T=
WIC-2A/S=
1-port ISDN WAN Interface Card (dial and leased line)
1-port ISDN w/NT-1 WAN Interface Card (dial and leased line)
1-port 4-Wire 56/64Kbps DSU/CSU WAN Interface Card
1-port Serial w/ Fractional T1/T1 DSU/CSU Interface Card
2-port Async/Sync Serial WAN Interface Card
Cisco 2600 Series Advanced Integration Modules
AIM-COMPR2=
Data Compression AIM for the Cisco 2600 series
PWR-2600-AC=
PWR-2600-DC=
ACS-2600RPS=
ACS-2600RM-19=
ACS-2600RM-24=
ACS-2600ASYN=
ACS-2600NEBS/ETSI=
BOOT-2600=
Cisco 2600 AC power supply spare
Cisco 2600 DC power supply spare
RPS Field Upgrade for the Cisco 2600 Series
19-Inch Rack Mount Kit for the Cisco 2600 Series
24-Inch Rack Mount Kit for the Cisco 2600 Series
Auxiliary and Console Port Cable Kit for Cisco 2600 Series
NEBS/ETSI Telco Accessory Kit for Cisco 2600 Series
Boot ROM Upgrade for Cisco 2600 Series
CON-SNT-PKG5
42
Cisco 3600 Series
Cisco 3600 Series
The Cisco 3600 series accommodates
the growing numbers of branch and
remote office users who need dialup
access to corporate intranets and the
public Internet. The Cisco 3600 series
of access dialup servers offers an unprecedented degree of flexibility for dialup
applications across both ISDN and asynchronous media. The Cisco 3600 series
also supports synchronous serial communication and is fully supported by Cisco
IOS software.
When to Sell
Sell This Product
Cisco 3620
• Medium-density WAN and dialup connectivity with:
–Up to 8 ISDN BRI ports with optional integrated NT1
–Up to 4 ISDN PRI ports with optional integrated CSU
–Up to 8 async/sync, 4 sync, and 32 async serial ports
–Up to 16 analog and 30 digital modems
• Medium-density LAN connectivity with:
–Up to 8 Ethernet ports
–Up to 2 Token Ring ports
–1 Fast Ethernet port
Cisco 3640
• High-density WAN and dialup connectivity with:
–Up to 24 ISDN BRI ports with optional integrated NT1
–Up to 8 ISDN PRI ports with optional integrated CSU
–Up to 24 async/sync serial ports
–Up to 8 sync serial ports
–Up to 96 async serial ports
–Up to 48 analog modems
–Up to 60 digital modems
• Medium- to high-density LAN connectivity with:
–Up to 14 Ethernet ports
–Up to 4 Token Ring ports
–Up to 2 Fast Ethernet ports
Key Features
• Combines dial access, advanced LAN-to-LAN routing services, and
multiservice integration of voice, video, and data in a single platform
• Modular design provides scalability, flexibility, and investment protection
• Industry-leading ISDN price/port and price/performance in high-end
branch/regional offices
• Integrated Cisco IOS software (price includes IP IOS software)
• Reduces or eliminates toll charges between offices; using Cisco IOS Quality
of Service features (such as RSVP, WFQ, CAR, and RED) voice traffic is
digitized and encapsulated in IP packets and consolidated with data traffic
to extend multiservice infrastructure to the branch office
43
Cisco 3600 Series
Specifications
Feature
Cisco 3620
Cisco 3640
Fixed Ports
None
None
Modular Slots
2
4
LAN/Combo Modules
Same as Cisco 3620
1-port 10BaseT Module
1-port 10BaseT, 2 WIC Slots
2-port 10BaseT, 2 WIC Slots
1 -port 10BaseT, 1-port Token Ring, 2 WIC Slots
1-port 100BaseTX Module
1-port 100BaseFX Module
1-port 100BaseTX, 1-port Channelized T1/ISDN-PRI
1-port 100BaseTX, 2-port Channelized T1/ISDN-PRI
1-port 100BaseTX, 1-port Channelized T1/ISDN-PRI w/ CSU
1-port 100BaseTX, 2-port Channelized T1/ISDN-PRI w/ CSU
1-port 100BaseTX, 1-port Channelized E1/PRI Unbalanced
1-port 100BaseTX, 2-port Channelized E1/PRI Unbalanced
1-port 100BaseTX, 1-port Channelized E1/PRI Balanced
1-port 100BaseTX, 2-port Channelized E1/PRI Balanced
WAN Modules
4-port BRI (S/T)
8-port BRI (S/T)
4-port BRI (U) w/ NT-1
4-port Serial
16-port Async
32-port Async
1-port Channelized T1/ISDN-PRI
2-port Channelized T1/ISDN-PRI
1-port Channelized T1/ISDN-PRI w/ CSU
2-port Channelized T1/ISDN-PRI w/ CSU
1-port HSSI
Compression
Same as Cisco 3620
ATM Modules
1-port 25-MBps ATM
Same as Cisco 3620
Voice/Fax Modules
1- or 2-slot voice/fax
Same as Cisco 3620
WAN Interface Card (WIC)
Modules
1-port ISDN BRI (U)
1-port sync serial
1-port 4-wire 56-kbps CSU/DSU
1-port T1/FT1 CSU/DSU
Same as Cisco 3620
Voice Interface Card (VIC)
Modules
2-port voice—FXS
2-port voice—E&M
2-port voice—FXO
Same as Cisco 3620
Modem Modules
6-, 12-, 18-, 24-, and 30-port digital modem
8- and 16-port analog modem
Same as Cisco 3620
80-MHz (IDT R4700 RISC)
100-MHz (IDT R4700 RISC)
Flash Memory
4 MB (default)
32 MB (max)
4 MB (default)
32 MB (max)
DRAM Memory
32 MB (default)
64 MB (max)
32 MB (default)
128 MB (max)
Power Supply
AC, DC optional
AC, DC optional
Dimensions (HxWxD)
1.75 x 17.5 x 13.5 in.
3.44 x 1.75 x 15 in.
Service Category
7
10
44
Cisco 3600 Series
• 3Com: NetBuilder II
• Ascend: MAX 2012, 2024, 4024, 4048
• Bay: ASN and ARN
• Bay: Nautica Marlin
• Livingston: Portmaster 2E/2ER
the following table: .
Distribution
Part Number
IOS Image
Release
Flash Memory
Required1
DRAM Memory
Required
CD36-C-11.3=
IP only
11.3(4)T
4 MB
16 MB
CD36-CP-11.3=
IP Plus
11.3(4)T
8 MB
24 MB
CD36-CW-11.3=
IP Plus 40
11.3(4)T
8 MB
24 MB
CD36-CY-11.3=
IP Plus 56
11.3(4)T
8 MB
32 MB
CD36-B-11.3=
IP/IPX/AppleTalk/DECnet
11.3(4)T
4 MB
24 MB
CD36-BP-11.3=
IP/IPX/AppleTalk/DECnec Plus
11.3(4)T
8 MB
32 MB
CD36-AP-11.3=
Enterprise Plus
11.3(4)T
8 MB
32 MB
CD36-AW-11.3=
Enterprise Plus 40
11.3(4)T
8 MB
32 MB
CD36-AY-11.3=
Enterprise Plus 56
11.3(4)T
8 MB
32 MB
45
Cisco 3600 Series
CISCO3620
CISCO3620-DC
CISCO3620-RPS
CISCO3640
CISCO3640-DC
CISCO3640-RPS
Cisco 3600 2-slot Modular Router-AC with IP Software
Cisco 3600 2-slot Modular Router-DC with IP Software
Cisco 3600 2-slot Modular Router, use w/ AC RPS with IP Software
Cisco 3600 4-slot Modular Router, use w/ AC RPS with IP Software
CD36-C-11.3=
CD36-CP-11.3=
CD36-CW-11.3=
CD36-CY-11.3=
CD36-CL-11.3=
CD36-B-11.3=
CD36-BP-11.3=
CD36-AP-11.3=
CD36-AW-11.3=
CD36-AY-11.3=
CD36-AL-11.3=
Cisco 3600 IP Feature Pack
Cisco 3600 IP Plus Feature Pack
Cisco 3600 IP Plus 40 Feature Pack
Cisco 3600 IP Plus 56 Feature Pack
Cisco 3600 IP Plus IPSec 56 Feature Pack
Cisco 3600 IP/IPX/AppleTalk/DECnet Feature Pack
Cisco 3600 IP/IPX/AppleTalk/DECnet Plus Feature Pack
Cisco 3600 Enterprise Plus Feature Pack
Cisco 3600 Enterprise Plus 40 Feature Pack
Cisco 3600 Enterprise Plus 56 Feature Pack
Cisco 3600 Enterprise Plus IPSec 56 Feature Pack
Cisco 3600 Series Modem Management Technology Licenses
MMTL-3600-6=
MMTL-3600-12=
MMTL-3600-18=
MMTL-3600-24=
MMTL-3600-30=
MMTL-3600/2600-8=
MMTL-3600/2600-16=
Modem Management Technology License- 6 modems
WIC-1B-S/T=
WIC-1B-U=
WIC-1DSU-56K4=
WIC-1DSU-T1=
WIC-1T=
1-port ISDN WAN Interface Card (dial and leased line)
1-port BRI (U) w/ NT1 WAN Interface Card (dial and leased line)
1-port Serial w/ 4-Wire 56/64Kbps DSU/CSU WAN Interface Card
1-port Serial w/ Fractional T1/T1 DSU/CSU WAN Interface Card
Cisco 3600 Series Voice Interface (VIC) Cards
VIC-2FXS=
VIC-2FXO=
VIC-2E/M=
2-port Voice Interface Card—FXS-Spare
2-port Voice Interface Card—FXO-Spare
2-port Voice Interface Card—E&M-Spare
MEM3600-4FS=
MEM3600-8FS=
MEM3600-16FS=
MEM3600-4FC=
MEM3600-8FC=
MEM3620-4D=
MEM3620-8D=
MEM3620-16D=
MEM3640-2X4D=
MEM3640-2X8D=
MEM3640-2X16D=
MEM3640-2X32D=
BOOT-3600=
Cisco 3600 Series - 4 MB Flash
Cisco 3600 Series - 4 MB Blank Flash PCMCIA Card
Cisco 3600 Series - 8 MB Blank Flash PCMCIA Card
Cisco 3620 - 4 MB DRAM SIMM
8 MB DRAM for the Cisco 3640 (2x4 MB DRAM SIMMs)
64 MB DRAM for the Cisco 3640 (2x32MB DRAM SIMMs)
Boot ROM Upgrade for Cisco 3600
Cisco 3600 Series LAN/Combo Modules
NM-1E=
NM-4E=
NM-1FE-TX=
NM-1FE-FX=
NM-1E2W=
NM-2E2W=
NM-1E1R2W=
NM-1FE1CT1=
NM-1FE1CT1-CSU=
NM-1FE1CE1B=
46
1-port 10bT Module
4-port 10bT Module
1-port 100bTX Module
1-port 100bFX Module
1-port 10bT, 2 WIC Slots
2-port 10bT, 2 WIC Slots
1 -port 10bT, 1-port Token Ring, 2 WIC Slots
1-port 100bTX, 1-port Channelized T1/ISDN-PRI
1-port 100bTX, 1-port Channelized T1/ISDN-PRI with CSU
1-port 100bTX, 1-port Channelized E1/PRI Balanced
Cisco 3600 Series
NM-1FE1CE1U=
NM-1FE2CT1=
NM-1FE2CT1-CSU=
NM-1FE2CE1B=
NM-1FE2CE1U=
1-port 100bTX, 1-port Channelized E1/PRI Unbalanced
1-port 100bTX, 2-port Channelized T1/ISDN-PRI
1-port 100bTX, 2-port Channelized T1/ISDN-PRI with CSU
1-port 100bTX, 2-port Channelized E1/PRI Balanced
1-port 100bTX, 2-port Channelized E1/PRI Unbalanced
NM-4B-S/T=
NM-8B-S/T=
NM-4B-U=
NM-8B-U=
NM-4T=
NM-4A/S=
NM-8A/S=
NM-16A=
NM-32A=
NM-8AM=
NM-16AM=
NM-1CT1=
NM-1CT1-CSU=
NM-2CT1=
NM-2CT1-CSU=
NM-1HSSI=
NM-COMPR=
4-port BRI (U) w/ NT-1 Module
8-port BRI (U) w/ NT-1 Module
4-port Serial Module
16-port Async Module
32-port Async Module
1-port Channelized T1/ISDN-PRI Module
1-port Channelized T1/ISDN-PRI w/ CSU Module
2-port Channelized T1/ISDN-PRI Module
2-port Channelized T1/ISDN-PRI w/ CSU Module
1-port HSSI Module
Compression Module
Cisco 3600 Series Modem Modules
NM-6DM=
NM-12DM=
NM-18DM=
NM-24DM=
NM-30DM=
MICA-6MOD=
6-port Digital Modem Module
6-port Digital Modem Module, Spare
Cisco 3600 Series Miscellaneous Modules
NM-1V=
NM-2V=
1-Slot Voice/fax Module-Spare
2-Slot Voice/fax Module-Spare
ACS-3620RM-19=
ACS-3620RM-24=
ACS-3640RM-19=
ACS-3640RM-24=
PWR-3620-AC
PWR-3620-DC
PWR-3640-AC
PWR-3640-DC
ACS-3620RPS=
ACS-3640RPS=
PWR600-AC-RPS-CAB
NM-BLANK-PANEL=
WIC-BLANK-PANEL=
19-Inch Rack Mount Kit for the Cisco 3620
AC Power Supply for the Cisco 3620
DC Power Supply for the Cisco 3620
AC Power Supply for the Cisco 3640
DC Power Supply for the Cisco 3640
RPS Field Upgrade for the Cisco 3620
RPS Field Upgrade for the Cisco 3640
600W Redundant AC Power System with DC Power Cables
Blank Network Module Panel
Blank WAN Interface Card Panel
CON-SNT-PKG7
CON-SNT-PKG10
47
Cisco MC3810 Multiservice Concentrator
Cisco MC3810 Multiservice
Concentrator
The Cisco MC3800 series of
multiservice, integrated access
platforms enables organizations to
integrate all traffic—voice, fax, video, legacy data, and LAN traffic—over a
single network backbone. The Cisco MC3810 multiservice access concentrator
can be deployed over private or public networks, dramatically reducing
equipment and connection costs, simplifying network management, and
improving application performance. The Cisco MC3810 combines switched
voice, LAN traffic, and legacy data over Frame Relay, ATM, or leased lines at
speeds up to T1/E1. The MC3810 is based on Cisco IOS software and is
designed to operate with the Cisco IGX™, LightStream® 1010, and IOS router
high-end systems.
When to Sell
Sell This Product
Cisco MC3810
• Reduce access charges by integrating private branch exchange (PBX),
video, and router access lines
• Multiservice branch connectivity
• Reduce interoffice voice costs (toll bypass)
• Voice ports can be analog or digital (channelized)
Key Features
• Seamlessly integrates data, voice, and video
• Leased line, Frame Relay, and ATM service compatible
• Cisco IOS-based multiprotocol routing, bridging, and Systems Network
Architecture (SNA)
• Quality voice compression at 8 kbps (G.729, G.729a) or 32 kbps (adaptive
differential pulse code modulation [ADPCM])
• Wire-speed E1/T1 router and serial data device with voice, video, and ATM
capability
48
Specifications
Feature
Cisco MC3810
Fixed LAN Ports
(connections)
Fixed WAN Ports
(connections)
2-port sync serial DB-60)
Modular Slots
1
Voice Modules
6-port analog voice
1-port digital voice
WAN Modules
1-port channelized T1/E1 multiflex trunk
40 MHz (Motorola 860 Power PC)
Flash Memory
4 MB (default)
8 MB (max)
DRAM Memory
16 MB (default)
32 MB (max)
Power Supply
AC, DC optional
Dimensions (HxWxD)
1.75 x 17.5 x 10.25 in.
Service Category
7
• Ascend: SA100 and SA50
• Newbridge: 3606, 3608, 3612, and 3620 Main Street products
• Nortel: Passport 4430/4450
• Motorola: Vanguard 64xx, 3xx, and 6560 MP Router
The Cisco MC3810 Series in distribution ships with:
Distribution
Part Number
Feature Pack
Description
IOS Image
Release
Flash Memory
Required
DRAM Memory
Required1
CD381-M-11.3=
IP/IPX/IBM
11.3(1)Ma4
4 MB
16 MB
CD381-MV-11.3=
IP/IPX/AT/IBM/voice
11.3(1)Ma4
4 MB
32 MB
49
Cisco MC3810 Multiservice Access Concentrator1
MC3810-4E
MC3810-4F
MC3810-6E
MC3810-6F
MC3810-DV
MC3810-DVE
Voice over Frame; 3-E&M, 1-FXO, 32 MB DRAM, 4 MB Flash
Voice over Frame; 3-FXS, 1-FXO, 32 MB DRAM, 4 MB Flash
Voice over Frame; 5-E&M, 1-FXO, 32 MB DRAM, 4 MB Flash
Voice over Frame; 5-FXS, 1-FXO, 32 MB DRAM, 4 MB Flash
Digital Voice over Frame; 2-T1, 32 MB DRAM, 4 MB Flash
Digital Voice over Frame; 2-T1, 1-FXO, 32 MB DRAM, 4 MB Flash
Cisco MC3810 Series Basic Maintenance
CON-SNT-PKG7
See the Cisco MC3810 Web site: http://www.cisco.com/go/3800
50
Cisco 4000 Series
Cisco 4000 Series
The Cisco 4000 Series routers are the
leading modular midrange/regional
routers in the industry. The modular
interfaces supported include
Ethernet, Fast Ethernet, Token Ring,
ISDN Basic Rate Interface (BRI),
ISDN Primary Rate Interface (PRI),
serial and channelized T1/E1, async, ATM, Fiber Distributed Data Interface
(FDDI), and High-Speed Serial Interface (HSSI).
The full suite of high-speed LAN support (Fast Ethernet, FDDI, ATM) provides
the investment protection necessary for a platform that can grow with the
increased local bandwidth generated from multimedia applications and the
migration from a shared to a switched environment. Their high-performance
RISC CPUs make the Cisco 4500-M and 4700-M excellent choices for
supporting software functionality that is either calculation intensive or process
switched. This performance, in conjunction with high-density synchronous and
asynchronous serial interfaces, makes the Cisco 4000 Series a particularly good
fit for integrating legacy equipment and protocols such as SNA into a robust,
end-to-end IP network.
When to Sell
Sell This Product
Cisco 4500-M
• Full suite of high-speed media (Fast Ethernet, FDDI, ATM, HSSI)
• Calculation-intensive or process-switched Cisco IOS software features
such as encryption and compression, certain IBM protocols, protocol
translation, and X.25 switching
• High-density LAN connectivity (up to 12 Ethernet ports, or 6 Token Ring
ports, or a combination thereof)
• Legacy environments requiring high-density synchronous and
asynchronous serial support
Cisco 4700-M
• 30–50 percent higher performance for future growth, multiple
high-speed interfaces, or configurations with multiple Cisco IOS
security, QoS, and accounting features enabled
• 64-MB main memory for large Internet route tables
Key Features
• Supports a full suite of Cisco IOS feature sets; customers can
cost-effectively choose from a rich set of protocols (IP, Internetwork Packet
Exchange [IPX], AppleTalk, DEC, VINES, and so on), QoS, security,
redundancy and WAN optimization, and management and accounting
features supported by the Cisco IOS software
• High-performance RISC architecture to support high-speed media (Fast
Ethernet, ATM, FDDI, HSSI) and calculation/process switching-intensive
features
• Optional redundant power system for very high reliability
51
Cisco 4000 Series
Specifications
Feature
Cisco 4500-M
Cisco 4700-M
Fixed Ports
None
None
Modular Slots
3
3
LAN Modules
2-port 10 MB, Full Duplex
1-port 100BaseTX Module
1-port Token Ring Module
1-port FDDI Module- Dual-Attached, Multimode
1-port FDDI Module- Dual-Attached, Single-Mode
1-port FDDI Module- Single-Attached
Same as Cisco 4500-M
WAN Modules
Same as Cisco 4500-M
4-port BRI (S/T)
8-port BRI (S/T)
2-port Serial
4-port Serial
2-port Serial, 16-port Async/Sync Serial (low speed) w/
EIA/TIA232 & V.35 Support
EIA/TIA232 & X21 Support
EIA/TIA232 Support
V.35 Support
2-port Serial, 16-port Async/Sync Serial w/ X.21
Support
1-port HSSI
100-MHz (IDT Orion RISC)
133-MHz (IDT Orion RISC)
Flash Memory
4 MB (default)
8 or 16 MB (max)
4 MB (default)
8 or 16 MB (max)
Shared Memory
4 MB (default)
8 or 16 MB (max)
4 MB (default)
8 or 16 MB (max)
Secondary cache memory 512 KB
DRAM Memory
16 MB (default)
32 MB (max)
16 MB (default)
32 or 64 MB (max)
Power Supply
AC, DC, and RPS options
AC, DC, and RPS options
Dimensions (HxWxD)
3.4 x 17.6 x 17.7 in.
3.4 x 17.6 x 17.7 in.
Service Category
11
12
• 3Com: NetBuilder II
• Bay: ASN
52
Cisco 4000 Series
The Cisco 4000 Series in distribution ships with
Distribution
Part Number
IOS Image
Release
Flash Memory DRAM Memory
Required1
Required1
CD45-C-11.2=
IP only
11.2(14)P
4 MB
CD45-CP-11.2=
IP Plus
11.2(14)P
4 MB
16 MB
CD45-CW-11.2=
IP Plus 40
11.2(14)P
4 MB
16 MB
CD45-CY-11.2=
IP Plus 56
11.2(14)P
4 MB
16 MB
CD45-B-11.2=
IP/IPX/AT/DEC
11.2(14)P
4 MB
16 MB
CD45-BW-11.2=
IP/IPX/AT/DEC Plus
11.2(14)P
8 MB
16 MB
CD45-BY-11.2=
IP/IPX/AT/DEC Plus 40
11.2(14)P
8 MB
16 MB
CD45-BP-11.2=
IP/IPX/AppleTalk/DECnet Plus 56
11.2(14)P
8 MB
16 MB
CD45-A-11.2=
Enterprise
11.2(14)P
8 MB
16 MB
CD45-AP-11.2=
Enterprise Plus
11.2(14)P
8 MB
16 MB
CD45-AW-11.2=
Enterprise Plus 40
11.2(14)P
8 MB
16 MB
CD45-AY-11.2=
Enterprise Plus 56
11.2(14)P
8 MB
16 MB
16 MB
Cisco 4000 Series Chassis 1
CISCO4500-M-CH
CISCO4700-M-CH
3-slot Modular Chassis- 100-MHz Processor
3-slot Modular Chassis- 150-MHz Processor
Cisco 4000 Series LAN Modules
NP-2E-FDX=
NP-6E=
NP-1FE=
NP-1RV2=
NP-2R=
NP-1F-D-MM=
NP-1F-D-SS=
NP-1F-S-M=
2-port 10mb, Full Duplex
6-port 10bT Module
1-port FDDI Module- Dual-Attached, Multimode
1-port FDDI Module- Dual-Attached, Single-Mode
1-port FDDI Module- Single-Attached
NP-4B=
NP-8B=
NP-2T=
NP-4T=
NP-CT1=
NP-2T16S-232V35=
NP-2T16S-232X21=
NP-2T16S-RS232=
NP-2T16S-V.35=
NP-2T16S-X21=
NP-1HSSI=
2-port Serial, 16-port Async/Sync Serial (low speed) w/ EIA/TIA232 & V.35 Support
2-port Serial, 16-port Async/Sync Serial (low speed) w/ EIA/TIA232 & X21 Support
2-port Serial, 16-port Async/Sync Serial (low speed) w/ EIA/TIA232 Support
2-port Serial, 16-port Async/Sync Serial (low speed) w/ V.35 Support
2-port Serial, 16-port Async/Sync Serial w/ X.21 Support
1-port HSSI Module
CD45-C-11.3=
CD45-CP-11.3=
CD45-CW-11.3=
CD45-CY-11.3=
CD45-CL-11.3=
CD45-B-11.3=
IP Feature Pack
IP/IPX/AT/DECnet Feature Pack
53
Cisco 4000 Series
CD45-BP-11.3=
CD45-AP-11.3=
CD45-AW-11.3=
CD45-AY-11.3=
IP/IPX/AT/DECnet Plus Feature Pack
Enterprise Plus w/ 40-bit encryption Feature Pack
Enterprise Plus w/ 56-bit encryption Feature Pack
MEM-4500M-4F=
MEM-4500M-16F=
MEM-4500M-8S=
MEM-4500M-16S=
MEM-4500M-16D=
MEM-4500M-32D=
MEM-4700M-64D=
4 MB Flash Upgrade
16 MB Flash Upgrade
8 MB Shared Upgrade
16 MB Shared Upgrade
16 MB Main Upgrade
32 MB Main Upgrade
64 MB Main Upgrade- for Cisco 4700M only
ACS-NPRM=
ACS-4000RPS=
CAB-HNUL=
CAB-HSI1=
CAB-OCT-V35-MT=
CAB-OCT-V35-FC=
CAB-OCT-232-MT=
CAB-OCT-232-FC=
CAB-OCT-X21-MT=
CAB-OCT-X21-FC=
19-Inch Rack Mount Kit for Cisco 4000 Series
RPS Field Upgrade for Cisco 4000 Series
HSSI Cable, Male-to-Male Null Modem Cable, 10 Foot
HSSI Cable, Male-to-Male Connectors, 10 Foot
8 Lead Octal Cable and 8 Male V35 DTE Connectors
8 Lead Octal Cable and 8 Female V35 DCE Connectors
8 Lead Octal Cable and 8 Male EIA/TIA232/V.24 DTE Connectors
8 Lead Octal Cable and 8 Female EIA/TIA232/V.24 DCE Connectors
8 Lead Octal Cable and 8 Male X21 DTE Connectors
8 Lead Octal Cable and 8 Female X21 DCE Connectors
CON-SNT-PKG11
CON-SNT-PKG12
54
Cisco AS5200/AS5300 Series
The AS5200/AS5300 series
products are high-performance,
medium- to high-density universal
access servers that deliver hybrid
asynchronous serial and ISDN line
service to accommodate both
mobile users and high-bandwidth
users. By terminating analog modem, ISDN, and voice (AS5300) calls on the
same chassis from the same trunk line, the AS5200/AS5300 products enable
ISPs and enterprise network managers to meet traditional analog dial access
needs, while supporting the growing demand for multiservice access. Also
available are the high-end dial platforms—AS5800 and AccessPath.
When to Sell
Sell This Product
Cisco AS5200
• Lowest possible price per port
• Hybrid async/ ISDN
• V.110 support for GSM cellular data
• Combines LAN, WAN, and async line support in a single package
Cisco AS5300
• High performance async/ ISDN/VoIP
• IP telephony option
• Full range of Cisco IOS options
• Best of breed modem management
• Distributed access pools with WAN backhaul
Key Features
• Universal access provides the ability to answer ISDN, 56K modem, and
voice calls
• Full support for Cisco IOS software
• Industry-leading price performance in the universal access market
• Scalability and investment protection through redundant backhaul support
for mission-critical applications
• Key component of Dial Access Stack Architecture (DASA)
• Supports all protocols and services on all asynchronous ports—including
users dialing in, as well as asynchronous routing and users dialing out
• Accommodates two PRI/T1 or PRI/E1 lines (AS5200); eight PRI/TI or
PRI/EI lines (AS5300)
• One 10-MB and one 10/100MB Ethernet to allow for redundant,
high-speed backhaul (AS5300)
• Terminates up to 240 concurrent calls (AS5300)
• The AS5300 is a voice over IP-capable machine
55
Specifications
Feature
AS5200
AS5300
Fixed LAN Ports
(connections)
2-port Ethernet (one 10BaseT and one
100BaseT)
Fixed WAN Ports
(connections)
2-port sync serial
2-port PRI (T1/E1)
4-port PRI (T1/E1)
8-port PRI (T1/E1)
4-port PRI sync serial
Modular Slots
3
3
Modules and Cards
Available
MICA Carrier Card
MICA Carrier Card and 4 Mica 6-port Modem
Module
MICA Carrier Card and 5 Mica 6-port Modem
Module
12-port Microcom Modem Module
Microcom/V110 Carrier Card
Microcom CC + Two 12-port Microcom Modules
Dual T1/PRI Card
MICA Carrier Card
Quad T1/PRI Card
Quad E1/PRI Card-Balanced/Unbalanced
Octal T1/PRI Card
Octal E1/PRI Card-Balanced/Unbalanced
VFC Carrier Card
Processor Speed (type) 20-MHz (68030)
150-MHz (R4700)
Maximum Async
Connections
48 (60 E1)
240
Flash Memory
8 MB (default); 16 MB (max)
8 MB boot Flash (default); 8 MB system Flash
(default)
Shared Memory
16 MB packet (default); 16 MB main (max)
DRAM Memory
32 MB (default with Quad card)
64 MB (default with Octal card)
Power Supply
AC or DC
Single AC or DC (default)
Internal Redundant AC or DC
Dimensions (HxWxD)
3.5 x 17 x 15 in.
3.5 x 17.5 x 18.25 in.
Service Category
13
14
AS5200
AS5300
3Com: SuperStack II, RA 300, and USR TCH
Ascend: MAX 4000
Lucent: PM-3
Nortel: Bay Versalar 8000
3Com: TCH HiPer
Ascend: MAX 6000
Lucent: PM-3
Nortel: Bay Versalar 5000
Nortel: CVX 1800
56
The Cisco AS5200 in distribution ships with:
• 4-MB Shared memory
• 8-MB Boot Flash memory
Distribution Feature Pack IOS Image
Part Number Description Release
Flash
Memory
Required
DRAM
Memory
Required
Shared
Memory
Required
Boot Flash
Memory
Required
CD52-C-11.3=
IP only
11.3(2)T
16 MB
8 MB
4 MB
8 MB
CD52-CP-11.3=
IP Plus
11.3(2)T
16 MB
8 MB
4 MB
8 MB
CD52-B-11.3=
Desktop
11.3(2)T
16 MB
8 MB
4 MB
8 MB
CD52-BP-11.3=
Desktop Plus
11.3(2)T
16 MB
8 MB
4 MB
8 MB
CD52-A-11.3=
Enterprise
11.3(2)T
16 MB
8 MB
4 MB
8 MB
CD52-AP-11.3=
Enterprise Plus
11.3(2)T
16 MB
8 MB
4 MB
8 MB
The Cisco AS5300 in distribution ships with:
• 32-MB DRAM memory with Quad card; 64-MB with Octal card
• 16-MB Shared memory
• 8-MB Boot Flash memory
Distribution Feature Pack IOS Image
Part Number Description Release
Flash
Memory
Required
DRAM
Memory
Required
Shared
Memory
Required
Boot Flash
Memory
Required
CD53-C-12.0=
IP only
12.0.2XD
8 MB
32 MB
16 MB
4 MB
CD53-CP-12.0=
IP Plus
12.0.2XD
8 MB
32 MB
16 MB
4 MB
CD53-B-12.0=
Desktop
12.0.2XD
8 MB
32 MB
16 MB
4 MB
CD53-BP-12.0=
Desktop Plus
12.0.2XD
8 MB
32 MB
16 MB
4 MB
CD53-A-12.0=
Enterprise
12.0.2XD
8 MB
32 MB
16 MB
4 MB
CD53-AP-12.0=
Enterprise Plus
12.0.2XD
8 MB
32 MB
16 MB
4 MB
57
Cisco AS5200 Series1
Cisco AS5200 Series Access Server Bundles
AS5224-56K-CH
AS5248-56K-CH
AS5201-CH, 24 56K Modems w/ Dual T1s
AS5201-CH, 48 56K Modems w/ Dual T1s
Cisco AS5200 Access Server MICA Bundles
AS5224-DM-CH
AS5248-DM-CH
AS5200 Chassis, 24 MICA® technology Modems, Dual T1, 1 MICA CC
AS5200 Chassis, 48 MICA technology Modems, Dual T1, 2 MICA CC
Cisco AS5200 Modules and Cards
AS52-CC-DM=
AS52-24DM-CC=
AS52-30DM-CC=
AS52-12MCOM=
AS52-24MCOM-CC=
AS52-2CT1=
AS52-CC-MCOM=
6DM=
MICA Carrier Card
MICA Carrier Card and 4 Mica 6-port Modem Module
MICA Carrier Card and 5 Mica 6-port Modem Module
12-port Microcom Modem Module
Microcom CC + Two 12-port Microcom Modules
Dual T1/PRI Card
Microcom/V110 Carrier Card
MICA 6-Port Modem Module
Cisco AS5200 Series Modem Management Technology Licenses2
FR52-MMTL-24=
FR52-MMTL-30=
FR52-MMTL-48=
FR52-MMTL-60=
FR52-MMTL-24/48=
FR52-MMTL-24/60=
FR52-MMTL-30/60=
FR52-MMTL-48/60=
Modem Management Technology License- 24 Modems
Modem Management Technology License Upgrade- 24 to 48
Cisco AS5200 Series Software Feature Packs
CD52-C-11.3=
CD52-CP-11.3=
CD52-B-11.3=
CD52-BP-11.3=
CD52-A-11.3=
CD52-AP-11.3=
IP Feature Pack
Desktop Feature Pack
Desktop Plus Feature Pack
Enterprise Feature Pack
Cisco AS5200 Series Memory Options
MEM-8BF-52=
MEM-1X16-AS52=
MEM-8S-52=
MEM-16S-52=
MEM-16M-52=
4 MB to 8 MB Boot FLASH Upgrade
16 MB Flash SIMM- Dual Flash Bank
4 MB to 8 MB Shared DRAM Upgrade
4 MB to 16 MB Shared DRAM Upgrade
12 MB to 16 MB Main DRAM Upgrade
Cisco AS5200 Series Accessories
ACS-2500ASYN=
CAB-V35MT=
CAB-V35FC=
CAB-232MT=
CAB-232FC=
CAB-449MT=
CAB-449FC=
CAB-X21MT=
CAB-X21FC=
CAB-530MT=
AS5200RM-19=
AS5200RM-24=
AUX/Console Part Cable Kit
V.35 Cable, DTE, Male, 10 Feet
V.35 Cable, DCE, Female, 10 Feet
X.21 Cable, DTE, Male, 10 Feet
X.21 Cable, DCE, Female, 10 Feet
Male DTE EIA/TIA-530 Cable, 10 Feet
19-Inch Rack Mount Kit
Cisco AS5200 Series Basic Maintenance
CON-SNT-PKG13
Cisco AS5200 Series SMARTnet Maintenance
2. Requires Plus feature pack.
58
Cisco AS5300 Series1
Cisco AS5300 Series Access Server Bundles
AS53-48-CH
AS53-60-CH
AS53-96-CH
AS53-96-RPS-CH
AS53-108-CH
AS53-120-CH
AS53-120-RPS-CH
AS53-192-RPS-CH
AS53-240-RPS-CH
AS5300, 48 Modems, Quad T1/PRI, IP IOS (channels only)
AS5300, 60 Modems, Quad E1/PRI, IP IOS (channels only)
AS5300, 96 Modems, Quad T1/PRI, IP IOS, RPS (channels only)
AS5300, 120 Modems, Quad E1/PRI, IP IOS (channels only)
AS5300, 120 Modems, Quad E1/PRI, IP IOS, RPS (channels only)
AS5300, 192 Modems, Octal T1/PRI, IP IOS, RPS (channels only)
AS5300, 240 Modems, Octal E1/PRI,IP IOS, RPS (channels only)
Cisco AS5300 Series Modules
AS53-4CT1=
AS53-4CE1=
AS53-CC-DM=
6DM=
Quad T1/PRI Card
Quad E1/PRI Card-Balanced/Unbalanced, Spare
MICA Carrier Card
MICA 6-Port Modem Module
Cisco AS5300 Series Modem Management Technology Licenses
FR53-MMTL-48=
FR53-MMTL-60=
FR53-MMTL-96=
FR53-MMTL-108=
FR53-MMTL-120=
Cisco AS5300 Series Software Feature Packs
CD53-C-11.3=
CD53-CP-11.3=
CD53-B-11.3=
CD53-BP-11.3=
CD53-A-11.3=
CD53-AP-11.3=
IP Feature Pack
Desktop Feature Pack
Desktop Plus Feature Pack
Enterprise Feature Pack
Cisco AS5300 Series Memory Options
MEM-8BF-AS53=
MEM-16F-AS53=
MEM-64M-AS53=
AS5300 4 MB to 8 MB Boot Flash Upgrade
AS5300 8 MB to 16 MB Flash Upgrade
AS5300 32 MB to 64 MB Main DRAM Upgrade
Cisco AS5300 Series Accessories
AS53-AC-RPS=
AS5300RM-19=
AS5300RM-24=
CAB-E1-RJ45BNC=
CAB-E1-RJ45TWIN=
CAB-T1-RJ45BARE=
Dual AC Power Supply for AS5300, Spare
E1 Cable RJ45 to Dual BNC (unbalanced), Spare
E1 Cable RJ45 to Twinax (balanced), Spare
T1 Cable RJ45 to RJ45 Bare, Spare
Cisco AS5300 Series Basic Maintenance
CON-SNT-PKG14
Cisco AS5300 Series SMARTnet Maintenance
See the Cisco AS5200 Series Web site: http://www.cisco.com/go/as5200 and the
Cisco AS5300 Series Web site: http://www.cisco.com/go/as5300
59
Cisco AS5800/AccessPath
Cisco AS5800/AccessPath1
The Cisco high-end dial products are
high-performance, high-density universal
access servers that deliver hybrid
asynchronous serial and ISDN line service
to accommodate both mobile users and
high-bandwidth users. By terminating both
analog modem and ISDN calls on the same
chassis from the same trunk line, the
AS5x00 enables ISPs and enterprise
network managers to meet traditional
analog dial access needs, while supporting
the growing demand for high-speed ISDN
access. Products in this family include the
AS5800 and AccessPath series. Also available are the midrange platforms—the
AS5200 and AS5300.
When to Sell
Sell This Product
Cisco AS5800
• High-density single system
• Highly available single system with multiple areas of redundancy
• Service provider or IP-focused installations
• Large scale system management with Cisco’s System Controller
AccessPath
• Large scale integrated solution
• Data or IP telephony concentrator
• Rapid deployment (integrated, pre-assembled, preconfigured
• Terminates up to 5040 concurrent data calls and up to 1260 concurrent
VoIP calls
Key Features
• Cisco AS5800
– Universal access provides ability to answer both ISDN and 56K modems
– Key component of Dial Access Stack Architecture (DASA)
– Large scale system management with Cisco’s System Controller
– Up to 48 Channelized T1/E1/PRI or 2 Channelized T3 interfaces
– Distributed, multiprocessor design for maximum performance and growth
• AccessPath
– Complete solution for Dial and IP Telephony POPs, preconfigured and
integrated at Cisco
– Termination up to 5040 concurrent data calls and up to 1260 concurrent
VoIP calls
– Up to 168 Channelized T1/E1/PRI or 3 Channelized T3 interfaces
1. For ordering information on these products, contact your Cisco Account Team.
60
Cisco AS5800/AccessPath
Specifications
Feature
AS5800
AccessPath TS3
Expansion Slots
14
None
None
5040
480
Maximum Async Connections 576 T1
AccessPath LS3
720 E1
672 T3
Maximum VoIP Connections
1260
N/A
200-MHz (R5000 RISC)
Dial shelf: 150 MHz (R4700)
Router shelf: 200 MHz (R5000)
System controller: 100 MHz
(RISC)
Dial shelf: 150 MHz (R4700)
Router shelf: 100 MHz (R4700)
Flash Memory
4 MB Boot Flash
16 MB PCMCIA
Dial shelf: 8 MB
Router shelf: 20 MB
System controller: 8 MB
Dial shelf: 8 MB
Router shelf: 4 MB
Shared Memory
4 MB SRAM
Dial shelf: 16 MB
Dial shelf: 16 MB
DRAM Memory
64 MB (default)
128 MB (max)
Dial shelf: 16 MB
Router shelf: 64 MB
System controller: 16 MB
Dial shelf: 16 MB
Router shelf: 16 MB
Power Supply
AC or DC
AC or DC
AC or DC
Dimensions (HxWxD)
33.25 x 17.5 x 24 in.
79.5 x 25.94 x 30 in.
N/A
AS5800
AccessPath
3Com: TCH HiPer
Ascend: MAX TNT
Lucent: PM-4
Nortel: Bay Versalar 5000 and Aptis CVX 1800
3Com: TCH HiPer
Ascend: MAX TNT
Lucent: PM-4
Nortel: Bay Versalar 5000 and Aptis CVX 1800
See the Cisco AS5800 Web site: http://www.cisco.com/go/AS5800, and the
AccessPath Web site: http://www.cisco.com/go/apath
61
Cisco 7200 Series
Cisco 7200 Series
The Cisco 7200 series routers
deliver exceptional
price/performance to meet the
following requirements:
regional and branch offices that
need gateway connectivity to the WAN and the Internet; remote site aggregation
for enterprise and service providers where multiple dispersed locations are
interconnected through a central site; sites that require IBM data center
connectivity; and sites that require multifunction capabilities that combine all
the above for multiservice voice, video, and data traffic.
A key strength of the Cisco 7200 is its modularity. With a choice of 2-, 4- and
6-slot chassis, three processors providing up to 200 kpps, an extensive range of
LAN and WAN interfaces with up to 48 ports, and single or dual power
supplies, the customer gets the performance and capacity required. This
modularity also provides investment protection and a guaranteed expansion
path.
When to Sell
Sell This Product
Cisco 7202
• 2-slot chassis
• 100-MHz processor
Cisco 7204
• 4-slot chassis
• 100-, 150-, or 200-MHz processor
Cisco 7206
• 6-slot chassis
• 100-, 150-, or 200-MHz processor
Key Features
• High performance switching—Supports high-speed media and high-density
configurations; with its RISC-based and SRAM-configured system
processors, the Cisco 7200 can switch up to 200,000 packets per second
• Full support for Cisco IOS software and enhancements for
high-performance network services—Performs network services including
quality of service, security, compression, and encryption at high speed
• High port density—Provides high port density and an extensive range of
LAN and WAN media, dramatically reducing the cost per port and
allowing flexible configuration
• Common port adapters—Uses the same port adapters as the Cisco 7500
Versatile Interface Processor (VIP), simplifying stocking spares and
protecting customer investment in interfaces
• High system availability: Maximizes network uptime through dual power
supplies and online insertion and removal of port adapters and power
supplies
62
Cisco 7200 Series
Specifications
Feature
Cisco 7202
Cisco 7204
Cisco 7206
Fixed Ports
None
None
None
Modular Slots
1 configurable WAN port
1 configurable LAN/WAN port
4
6
LAN Port Adapters
Same as Cisco 7202
4-port 10BaseT
8-port 10BaseT
5-port 10BaseFL
1-port 100BaseFX
1-port 100BaseTX
4-port Token Ring 4/16 Mbps, Full Duplex
4-port Token Ring 4/16 Mbps
1-port FDDI Single Mode
1-port FDDI Single Mode, Full Duplex
1-port FDDI Multimode
1-port FDDI Multimode, Full Duplex
Same as Cisco 7202 plus
2-port 100BaseTX
2-port 100BaseFX
WAN Port Adapters
Same as Cisco 7202
8-port BRI (S/T)
4-port Serial - Enhanced
4-port E1 G.703 Serial, 120 ohm/balanced
4-port E1 G.703 Serial, 75 ohm/unbal
8-port Serial, EIA/TIA
8-port Serial, V.35
8-port Serial, X.21
2-port Channelized E1/PRI, 120 ohm
2-port Channelized E1/PRI, 75 ohm
4-port T1 CES + 1-port ATM OC
Single-mode
4-port T1 CES + 1-port ATM T3
4-port E1 OC-3, 120 ohms
E3/E1 CES, 120 ohms
Channelized DS3, w/ 4-port T1 Breakout
Connectors
1-port HSSI
1-port ATM OC-3, Multimode
1-port ATM OC-3, Single-mode
Same as Cisco 7202
Service Adapter
Modules
None
Compression
Encryption
Compression
Encryption
Network Processing NPE-100
Engines
NPE-100, 150, or 200
NPE-100, 150, or 200
Processor Speed
(type)
100 MHz (MIPS RISC)
100, 150, or 200 MHz (MIPS
RISC)
100, 150, or 200 MHz (MIPS
RISC)
Flash PCMCIA
Memory
16 MB (default)
40 MB (max)
16 MB (default)
40 MB (max)
16 MB (default)
40 MB (max)
DRAM Memory
32 MB (default)
128 MB (max)
32 MB (default)
128 MB (max)
32 MB (default)
128 MB (max)
Power Supply
AC or DC, dual optional
Dimensions
(HxWxD)
5.25 x 16.8 x 17 in.
5.25 x 16.8 x 17 in.
5.25 x 16.8 x 17 in.
Service Category
13
13
14
• 3Com: NETBuilder II
• Bay Networks: Backbone Link Node (BLN)
• Sentient: Ultimate 1000
• Packeteer: PacketShaper 4000
63
Cisco 7200 Series
Distribution
Part Number
Feature Pack
Description
IOS Image
Release
Flash Memory
Required
DRAM Memory
Required
CD72-R-11.2=
Network Layer 3 switching
11.1(17)CA
11.2(8)P
11.2(11)P
16 MB
16 MB
16 MB
32 MB
32 MB
32 MB
CD72-C-11.2=
IP only
11.2(8)P
11.2(11)P
16 MB
16 MB
32 MB
32 MB
CD72-BS-11.2=
Desktop and IBM
11.1(17)CA
11.1(19)R
11.2(8)P
11.2(11)P
16 MB
16 MB
16 MB
16 MB
32 MB
32 MB
32 MB
32 MB
CD72-BSN-11.2=
Desktop/IBM/APPN
11.2(8)P
11.2(11)P
16 MB
16 MB
32 MB
32 MB
CD72-A-11.2=
Enterprise
11.1(17)CA
11.1(19)R
11.2(8)P
16 MB
16 MB
16 MB
32 MB
32 MB
32 MB
CD72-AN-11.2=
Enterprise and APPN
11.1(17)CA
11.1(19)R
11.2(8)P
11.2(11)P
16 MB
16 MB
16 MB
16 MB
32 MB
32 MB
32 MB
32 MB
Cisco 7200 Series Router Chassis and Power Supply1
CISCO7202=
CISCO7204-CH
CISCO7206-CH
2-slot Modular Router- AC
Cisco 7200 Series Chassis and ATM Port Adapter Bundles
CISCO7202-A3-OC3SM
CISCO7202-A3-OC3MM
CISCO7202-A3-T3
C7202 Bundle with ATM-OC3SM Port Adapter
C7202 Bundle with ATM-OC3MM Port Adapter
C7202 Bundle with ATM-T3 Port Adapter
Cisco 7200 Series I/O Bundles
C7200-I/O-16M-SW=
C72FE-I/O-16M-SW=
7200 Bundle- I/O w/ 16MB Flash and Layer 3 Switching Software
7200 Bundle- I/O w/ 16MB Flash, Layer 3 Switching Software + 1-port FE (RJ-45)
Cisco 7200 Series Network Processing Engines
NPE-100=
NPE-150=
NPE-200=
Network Processing Engine 100- Zero SRAM
Network Processing Engine 150- 1-MB SRAM
Network Processing Engine 200- 4 MB SRAM
Cisco 7200 Series I/O Controllers
MEM-I/O-FLC8M=
MEM-I/O-FLC16M=
MEM-I/O-FLC20M=
I/O w/ 8 MB PCMCIA Flash Memory
Cisco 7200 Series LAN Port Adapters
PA-4E=
PA-8E=
PA-FE-TX=
PA-5EFL=
PA-FE-FX=
PA-4R-FDX=
PA-4R=
PA-F-MM=
64
4-port 10bT Port Adapter
8-port 10bT Port Adapter
1-port 100bTX Port Adapter
5-port 10bFL Port Adapter
1-port 100bFX Port Adapter
4-port Token Ring 4/16 Mbps, Port Adapter- Full Duplex
4-port Token Ring 4/16 Mbps Port Adapter
1-port FDDI Port Adapter- Multimode
Cisco 7200 Series
PA-F-SM=
PA-F/FD-MM=
PA-F/FD-SM=
1-port FDDI Port Adapter- Single Mode
1-port FDDI Port Adapter- Multimode, Full Duplex
1-port FDDI Port Adapter- Single Mode, Full Duplex
Cisco 7200 Series WAN Port Adapters
PA-8B-S/T=
PA-4B-U=
PA-4T+=
PA-8T-232=
PA-8T-V35=
PA-8T-X21=
PA-4E1G/120=
PA-4E1G/75=
PA-2CE1/PRI-120=
PA-2CE1/PRI-75=
PA-2CT1/PRI=
PA-A1-OC3SM=
PA-A2-4T1C-OC3SM=
PA-A2-4T1C-T3ATM=
PA-A2-4E1XC-E3ATM=
PA-A2-4E1XC-OC3SM=
PA-CT3/4T1=
PA-A1-OC3MM=
PA-H=
8-port BRI (S/T) Port Adapter
4-port BRI (U) w/ NT-1 Port Adapter
4-port Serial Port Adapter- Enhanced
8-port Serial Port Adapter- 232
8-port Serial Port Adapter- V.35
8-port Serial Port Adapter- X.21
4-port E1 G.703 Serial Port Adapter- 120 Ohm/Balanced
4-port E1 G.703 Serial Port Adapter- 75 Ohm/Unbalanced
2-port Channelized E1/PRI Port Adapter- 120 Ohm
2-port Channelized E1/PRI Port Adapter- 75 Ohm
2-port Channelized T1/PRI Port Adapter
1-port ATM OC-3 Port Adapter- Single-mode, Intermediate Reach
4-port T1 CES + 1-port ATM OC Single-mode Port Adapter
4-port T1 CES + 1-port ATM T3 Port Adapter
E3/E1 CES Port Adapter- 120 ohms
4-port E1 OC-3 Port Adapter- 120 ohms
Channelized DS3 Port Adapter w/ 4-port T1 Breakout Connectors
1-port ATM OC-3 Port Adapter- Multimode
1-port HSSI Port Adapter
Cisco 7200 Series Service Adapters
S/A-COMP/1=
S/A-COMP/4=
Service Adapter; Compression - 64 VCs Stac
Service Adapter; Compression - 256 VCs Stac
CD72-R-11.2=
CD72-C-11.2=
CD72-BS-11.2=
CD72-BSN-11.2=
CD72-A-11.2=
CD72-AN-11.2=
Network Layer 3 Switching Feature Set
IP Feature Set
Desktop and IBM Feature Set
Desktop/IBM/APPN Feature Set
Enterprise Feature Set
Enterprise and APPN Feature Set
Cisco 7200 Series License for Advanced Software Options
FR-IR72=
FR-NF72=
FR-WPP72=
7200 Series InterDomain Routing License
7200 Series NetFlow License
7200 Series WAN Packet Protocols License
MEM-NPE-32MB=
MEM-NPE-64MB=
MEM-NPE-128MB=
Cisco 7200 Series NPE 32 MB DRAM Upgrade Kit
ACS-7200-RMK=
Cisco 7200 Rack Mount Kit and Cable Management Bracket
CON-SNT-PKG13
CON-SNT-PKG14
Cisco 7202 and 7204 Series SMARTnet Maintenance
65
Cisco 7500 Series
Cisco 7500 Series1
The Cisco 7500 series is Cisco's
premier high-end platform of
multiprotocol routers. These systems
combine Cisco's proven software
technology with exceptional reliability,
availability, serviceability, and
performance features to meet the
requirements of today's most
mission-critical internetworks. The
Cisco 7500 series provides information
system professionals with the flexibility they need to meet the constantly
changing requirements at the core and distribution points of the internetwork.
When to Sell
Sell This Product
Cisco 7505
• One CyBus
• Solution for complex networking products in the data center, the
workgroup, and the core of the network
Cisco 7507
• Dual CyBuses
• High-bandwidth applications with medium-density requirements
Cisco 7513
• Dual CyBuses
• Ideal solution for large, collapsed backbone environments or as an
aggregation router supporting large numbers of remote users
Key Features
• High-performance switching—Delivers high performance for
mission-critical applications by supporting high-speed media and
high-density configurations; using the processing capabilities of the
Versatile Interface Processors (VIPs) and Cisco Express Forwarding, the
Cisco 7500 series system capacity can exceed a million packets per second
• Full support for Cisco IOS software and enhancements for
high-performance network services—Performs network services such as
quality of service, security, compression, and encryption at high speed; VIP
technology extends the performance of these services though distributed IP
services feature
• High port density—Provides high port density and an extensive range of
LAN and WAN media; this feature dramatically reduces the cost per port
and allows a flexible configuration
• Common port adapters—VIPs use the same port adapters as Cisco 7200,
simplifying sparing and protecting customer investment in interfaces
• Detailed traffic accounting and billing—Supports NetFlow switching,
which captures detailed traffic statistics for call-detail recording capability
1. For ordering information on this product, contact your Cisco Account Team.
66
Cisco 7500 Series
Specifications
Feature
Cisco 7505
Cisco 7507
Fixed Ports
None
None
None
Modular Slots
5
7
13
Interface
Processor Slots
4
5
11
RSPs
1 (100-MHz RSP1 or 200-MHz RSP4)
2 (optional dual RSPs;
100-MHz RSP2 and/or
200-MHz RSP4)
2 (optional dual RSPs;
100-MHz RSP2 and/or
200-MHz RSP4)
LAN Port
Adapters
Same as Cisco 7505
4- or 8-port Ethernet 10BaseT
5-port Ethernet 10BaseFL
1-port Fast Ethernet 100BaseTX or
100BaseFX
4-port Token Ring 4/16Mbps
4-port Token Ring 4/16 Mbps, full duplex
1-port FDDI multimode or single mode
1-port FDDI full duplex multimode or single
-mode
1-port 100VG
Same as Cisco 7505
WAN Port
Adapters
Same as Cisco 7505
4-port serial, enhanced
8-port serial, V.35, or 232, or x.21
1- or 2-port HSSI
1-port ATM OC-3 single-mode IR
1-port ATM OC-3 multimode
2-port channelized E1/PRI, 75 or 120 ohm
4-port E1 G.703 serial (75 ohm/unbalanced)
4-port E1 G.703 serial (120 ohm/balanced)
1-port E3 serial with E3 DSU
2-port E3 serial with DSUs
1- or 2-port T3 serial with T3 DSUs
2-port JT2 6.3-Mbps serial
Same as Cisco 7505
Advanced
Technology
Interface
Processors
Packet over SONET OC-3/SDH multimode Same as Cisco 7505
Packet over SONET OC-3/SDH single mode
Channelized DS3
Same as Cisco 7505
Service Adapter
Modules
Compression
Encryption
Compression
Encryption
VIP Modules
VIP2-15, VIP2-40, VIP2-50
VIP2-15, VIP2-40, VIP2-50
VIP2-15, VIP2-40, VIP2-50
Processor
Mips RISC
Mips RISC
Mips RISC
High-Speed
Backplane
5 CyBus slots
1 Gbps backplane
4 interface processor slots
1 RSP slot
7 CyBus slots
2 Gbps backplane
2 RSP slots
13 CyBus slots
2 Gbps backplane
2 RSP slots
Boot Memory
256 KB
256 KB
256 KB
Shared Memory
16 MB (min); 40 MB (max)
DRAM Memory
32 MB (default)
128 MB (RSP2 max)
256 MB (RSP4 max)
32 MB (default)
128 MB (RSP2 max)
256 MB (RSP4 max)
32 MB (default)
128 MB (RSP2 max)
256 MB (RSP4 max)
Power Supply
AC, dual AC/DC, dual DC
Dimensions
(HxWxD)
10.5 x 17.5 x 17 in.
19.25 x 17.5 x 25.1 in.
33.75 x 17.5 x 22 in.
Compression
Encryption
Cisco 7513
67
Cisco 12000 Series
Cisco 12000 Series1
Cisco's gigabit switch router (GSR)
family is the premier platform for
Internet service providers, carriers
who provide Internet services, Internet
2 and next-generation network
applications, high-speed enterprise
WAN backbones, and high-speed
metropolitan-area network (MAN)
backbones. The GSR series is targeted
at scaling Internet and enterprise
backbones to speeds of
OC-3/Synchronous Transport Module level (STM-1), OC-12/STM-4, and
OC-48/STM-16.
When to Sell
Sell This Product
Cisco 12008
• 8 configurable slots
• Compact design
Cisco 12012
• 12 configurable slots
• Highest available throughput
Key Features
• Scalable performance
– Distributed architecture delivers scalable Layer 3 switching performance
as line cards are added
– Line rate forwarding fills Synchronous Optical Network/Synchronous
Digital Hierarchy (SONET/SDH) transmission pipe to capacity, ensuring
the best return on investment for expensive WAN circuits
– Modular multigigabit crossbar switching fabric allows bandwidth to
scale as backbone requirements grows
– Switch fabric design supports virtual output queues to eliminate
head-of-line blocking
– Supports industry-leading Cisco IOS software
• Carrier-class availability
– Redundancy in all key system components (processors, switch fabric, line
cards, and power) minimizes network disruptions if a failure occurs
– Hot-swap capability
68
Cisco 12000 Series
Specifications
Feature
Cisco 12008
Cisco 12012
Modular Slots
8 configurable
5 switch fabric
12 configurable
5 switch fabric
Line Card Slots
7 (maximum)
11 (maximum)
Supported Line Cards
1-port OC-48/STM-16 POS
1-port channelized OC-12 to DS3
1-port Gigabit Ethernet
1-port OC-12/STM-4 ATM
4-port OC-3/STM-1 ATM
Same as Cisco 12008
200 MHz (R5000)
200 MHz (R5000)
Flash Memory
20 MB (default)
128 MB (maximum)
20 MB (default)
128 MB (maximum)
DRAM Memory
64 MB GRP (default); 256 MB EDO (max)
32 MB line cards (default); 256 MB EDO (max)
32 MB buffered memory (default); 128 MB (max)
Same as Cisco 12008
Power Supply
AC or DC
AC or DC
Dimensions (HxWxD)
24.85 x 17.4 x 21.2 in.
56 x 17.3 x 21 in.
• Juniper: M40
69
70
Cisco 12000 Series
71
Cisco 12000 Series
72
Cisco 12000 Series
Switches and Hubs
Product
Features
Cisco 1548 Micro Switch Fixed configuration 10/100 Ethernet switch
10/100
• 8 autosensing 10/100 ports
Cisco Switches and Hubs at a Glance
Page
75
• Unmanaged
Catalyst 1900 Series
Fixed configuration Ethernet switches
77
• 12 or 24 10BaseT ports
• Two 100BaseTX or one 100BaseTX and one 100Base FX uplinks
• Managed
Modular Ethernet switches
• 24 10BaseT ports
• Two high-speed module slots for Fast Ethernet, FDDI, and ATM
• Managed
Fixed-configuration Ethernet switches
83
• 10/100 autosensing and autonegotiating interface
• Dual high-speed 100BaseTX (with MII alternative) or 100BaseFX
uplinks
• Managed
Catalyst 2900 Series XL Fixed and modular 10/100 Ethernet switches
80
85
• 8, 16, 22, or 24 10/100 ports
• Two high-speed module slots accommodating 10/100, 100BaseFX
• Future modules: Gigabit Ethernet, ATM, and ISL (2916M only)
• Managed
Modular stacking Ethernet switches
88
• Up to five units stackable
• Supports 10Base2, 10BaseT, 10BaseFL, 100BaseT, 100BaseF, ATM
• Router module available
• Managed
Fixed and modular Token Ring switches
91
• 20 or 24 Token Ring ports
• Stackable up to 8 switches
• One FlexSlot accommodating additional Token Ring ports or ATM
or ISL uplinks (Cisco 3900 only)
• Managed
Catalyst 5500/5000
Series
Fully modular, high-performance, multimedia switches
93
• Ethernet, Fast Ethernet, Fast EtherChannel®, Gigabit Ethernet
(future), FDDI/CDDI, Token Ring, and ATM modules
• System multicast throughput ranging from 1 Mpps to >50 Mpps
• Optional route switch module and NetFlow switching feature
card for Layer 3 functionality
• Managed
High-performance, modular, multimedia switch router
97
• Wire speed, nonblocking IP, IPX, IP multicast Layer 3 switching
• Multiple interface options
• Managed
Cisco 1500 Series Micro Fixed-configuration 10-Mbps hub
Hubs
• Eight 10BaseT ports
98
• Manageable and managed models
• Up to five units stackable
• Tabletop design
71
Product
Features
Page
Cisco HP 10BaseT Hub
Fixed configuration Ethernet hub
• 16 10BaseT ports and 1 AUI connection
• Manageable via SNMP, telnet, or terminal-based
• Up to four units stackable
• Integrated with Cisco IOS technologies
100
Cisco 1528 10/100 Micro Fixed-configuration 10/100 Ethernet hub
Hub
• 8 autosensing 10/100 ports
102
• Unmanaged
Cisco FastHub® Series Fixed-configuration and expandable 10/100- and 100-Mbps hubs
• Range of port densities
• Manageable and nonmanaged models
• Some models stackable
72
104
Modular Ports Only
Cisco 1528
FastHub 112T
FastHub116T
FastHub 124T
FastHub 216T
Cisco HP 1516
Cisco 1503
Cisco 1502
Catalyst 8500
Catalyst 5000
Catalyst 3900
Catalyst 3000
X
X
X
X
X
X
X
X
FastHub 316C
X
X
FastHub 316T
X
Catalyst 2900 XL
X
Hubs
Catalyst 2900
X
Fixed and Modular
Ports
Catalyst 2820
Catalyst 1900
Fixed Ports Only
Cisco 1548
Switches
Cisco Switches and Hubs Port Matrix
Cisco Switches and Hubs Port Matrix
X
X
X
X
X
Ports
10Base2
10BaseT Switched
X
X
X
100BaseT Switched
X
X
100BaseF Switched
X
X
10BaseFL Switched
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
10/100 Autosensing X
Switched
Shared 10BaseT
X
X
Shared 10/100
X
X
Shared 100BaseT
X
Shared 100BaseF
X
100VG
X
X
X
X
X
X
X
Token Ring
X
FDDI/CDDI
X
X
ATM
X
X
Gigabit Ethernet
X
X
X
X
X
X
X
73
Cisco Ethernet and Fast Ethernet Switches Overview
Cisco Ethernet and Fast Ethernet Switches Overview
Cisco’s award-winning Catalyst switch family spans the entire user application
spectrum, from cost-conscious desktop and workgroup switches to
multilayer-capable switches for scalable enterprise applications in the wiring
closet, data center, and backbone. The Catalyst line of switching solutions offers
scalability, breadth, performance, and manageability.
Cisco IOS software delivers advanced network services to Catalyst platforms
and networked applications. Cisco IOS technologies, optimized for switching
and available on all Catalyst switches, include Fast EtherChannel technology for
bandwidth aggregation, Cisco Group Management Protocol support for
optimized performance with multicast and multimedia traffic, and extensive
management features. Cisco IOS software also provides support for virtual
LAN (VLAN) configuration and management, IP address management, and
secure access to network services.
Some of the key features of Cisco IOS software as it is supported by Catalyst
Ethernet switches include the following:
• CiscoView graphical user interface (GUI) based network management
support, allowing easy point-and-click discovery of device status, statistics,
and comprehensive per-port configuration and performance information
• Web-based interface for installation and administration
• Telnet and SNMP support for in-band and out-of-band management console
• Embedded RMON for four groups of RMON and a Switched Port
Analyzer (SPAN) port, supporting a RMON probe for complete traffic
monitoring
• LEDs for monitoring the activities and status of the switches
• IEEE 802.1d spanning tree for network loop detection and disabling, and
for fault-tolerant connectivity
• Cisco Discovery Protocol (CDP) to deliver network topology discovery and
mapping, allowing devices to discover other Cisco devices on the network
• Multicast address registration and packet filtering
• Intranet multimedia and multicast support through the CGMP
• VLANs ease network administration by enabling users to be logically
grouped, regardless of physical location (Catalyst 1900, 2820, 2900, 2900
XL, 3x00, and 5000 Series)
– Virtual Trunking Protocol (VTP) allows VLAN configuration changes
made on one switch to be automatically updated to the other switches
– Inter-Switch Link (ISL) protocol dynamically configures trunk ports
between Catalyst switches (available on 2900 XL in Q’1 ‘99)
• Fast EtherChannel technology provides bandwidth aggregation, enabling
parallel bandwidth links between switches (Catalyst 1900, 2820, 2900 XL,
and 5000 Series)
74
Cisco 1548 Micro Switch 10/100
Cisco 1548 Micro Switch
10/100
The Cisco 1548 Micro Switch
10/100 is an affordable,
easy-to-use, autosensing Fast
Ethernet switch for creating
high-performance LANs in small
offices and workgroups.
The Cisco 1548 is part of the Cisco Networked Office stack family of products
designed to provide integrated, secure networking solutions for small businesses
and small branch offices.
When to Sell
Sell This Product
Cisco 1548
• The higher performance of a 10/100 autosensing Fast Ethernet switch to
serve users in a small office or workgroup
• A LAN backbone in larger small-office networks
Key Features
• Eight 10BaseT/100BaseTX Fast Ethernet ports that support connections at
Ethernet and Fast Ethernet speeds
• 800 Mbps switching capacity with up to a 1.19 million packets-per-second
forwarding rate
• Autosensing of communications speed and autonegotiation of duplex mode
• Full-duplex operation on each switched 10/100 port, delivering up to
200 Mbps of bandwidth to end stations or servers and between switches
• Automatic configuration and self-test on startup
• Extensive array of LEDs for convenient visual management
• Operation as a standalone device or connected to other hubs, switches, or
routers to form a larger network
75
Cisco 1548 Micro Switch 10/100
Specifications
Feature
Cisco 1548
Fixed Ports (connections)
8
Modular Slots
None
Backplane
800 Mbps
Stackable
No
Full-Duplex Capabilities
Yes
Dimensions (HxWxD)
3.1 x 11.2 x 8.7 in.
Service Category
1
• 3Com: Baseline 10/10 Switch and OfficeConnect Switch 400
• Dlink: Switch 8-Port and DES-3208 SNMP
• NetGear: FS508
Cisco 1548 Micro Switch1
CISCO1548U-DS
CON-SNT-PKG1
8-port 10/100- Autosensing, Full-Duplex
Cisco 1548 Micro Switch SMARTnet Maintenance
See the Cisco 1548 Micro Switch Web site: http://www.cisco.com/go/1548
76
Cisco Catalyst 1900 Series
The Catalyst 1900 series switches,
available in standard and
enterprise editions, provide
industry-leading performance and
Cisco end-to-end network integration at an exceptionally affordable price.
Enterprise edition software enables these switches to deliver unmatched
network configuration flexibility and scalability through embedded Cisco IOS
technologies, delivering comprehensive management and security, bandwidth
optimization, networked multimedia, and virtual LAN (VLAN) support.
When to Sell
Sell This Product
Standard Edition
• Lowest-cost switched Ethernet to individual desktops and 10BaseT
hubs
• High-speed connections to 100BaseT backbones or servers
• Software upgradable to enterprise edition
Enterprise Edition
• End-to-end ISL VLANs
• Bandwidth aggregation with Fast EtherChannel technology
• Enhanced security with TACACS+ and multi-level console access
• Consistent management interface across Cisco product lines with Cisco
IOS command-line interface (CLI)
Key Features
• 1024 Media Access Control (MAC) address cache
• Cisco Visual Switch Manager, a web-based interface for ease of installation,
administration and management
• CiscoWorks device-management support
• Telnet and SNMP support for in-band management and a menu-driven,
out-of-band management console
• CGMP for dynamic and selective forward routed IP multicast traffic to
target multimedia end stations, reducing overall network traffic
• Embedded RMON software agents that support four RMON groups
(history, statistics, alarms, and events) and SPAN port for connection to
RMON probe
• Support for up to four overlapping bridge groups to manage bandwidth
and provide added security through broadcast control
• Cisco IOS CLI (enterprise edition)
• Enhanced security through TACACS+ authentication of user names and
passwords (enterprise edition)
• Bandwidth aggregation through Fast EtherChannel technology enhances
fault tolerance and offers up to 400 Mbps of bandwidth between switches
and routers and individual servers (enterprise edition)
77
Specifications
Feature
Catalyst 1912
Catalyst 1924
Fixed Ports
(connections)
12-port (10BaseT)
1-port (AUI)
2-port 100BaseTX or 1-port 100BaseTX and
1-port 100BaseFX (1912C)
24-port (10BaseT)
1-port (AUI)
2-port 100BaseTX or 1-port 100BaseTX and 1-port
100BaseFX (1924C)
Modular Slots
None
None
Backplane
1 Gbps
1 Gbps
Stackable
No
No
Full-Duplex Capabilities Half/full duplex autonegotiated
Half/full duplex autonegotiated
VLAN Maximum
Up to four overlapping bridge groups or 1024 ISL Up to four overlapping bridge groups or 1024 ISL
VLANs
VLANs
FEC
Yes
Yes
ISL
Yes
Yes
Management
Capabilities
SNMP, out-of-band, Telnet, RMON, Cisco Visual Same as Catalyst 1912
Switch Manager Web-based interface, CWSI,
CiscoView, StackView/Stack Maker
Processor
80486 CPU
80486 CPU
Flash Memory
1 MB
1 MB
DRAM
2 MB
2 MB
Embedded RMON
History, Events, Alarms, Statistics
Dimensions (HxWxD)
1.73 x 17.5 x 8.25 in.
1.73 x 17.5 x 8.25 in.
Service Category
1 (standard edition)
2 (enterprise edition)
• 3Com: SuperStack Switch 1100
• Bay: BayStack 303 and 304 switches
78
Catalyst 1900 Series Standard Edition1
WS-C1912-A
WS-C1912C-A
WS-C1924-A
WS-C1924C-A
12-port 10bT + 2-port 100bTX- Enterprise Upgradeable
12-port 10bT + 1-port 100bTX + 1-port 100bFX- Enterprise Upgradeable
24-port 10bT + 2-port 100bTX- Enterprise Upgradeable
24-port 10bT + 1-port 100bTX + 1-port 100bFX- Enterprise Upgradeable
Catalyst 1900 Series Enterprise Edition
WS-C1912-EN
WS-C1912C-EN
WS-C1924-EN
WS-C1924-EN-5PACK
WS-C1924C-EN
WS-C1924C-EN-5PACK
12-port 10bT + 2-port 100bTX- Enterprise Edition
12-port 10bT + 1-port 100bTX + 1-port 100bFX- Enterprise Edition
24-port 10bT + 2-port 100bTX- Enterprise Edition
5 Catalyst 1924-EN Switches
24-port 10bT + 1-port 100bTX + 1-port 100bFX- Enterprise Edition
5 Catalyst 1924C-EN Switches
Catalyst 1900 Series Upgrade Kits
WS-C19/28EEUG
WS-C19/28UG10
Catalyst 1900/2820 Enterprise Edition Upgrade Kit
Catalyst 1900/2820 Enterprise Edition Upgrade Kit—10 licenses
Catalyst 1900 Series Basic Maintenance
CON-SNT-PKG1
CON-SNT-PKG2
CON-SNT-PKG2
CON-SNT-PKG3
CON-SNT-PKG4
Catalyst 1912 Standard Edition SMARTnet Maintenance
Catalyst 1912 Enterprise Edition SMARTnet Maintenance
Catalyst 1924 Standard Edition SMARTnet Maintenance
Catalyst 1924 Enterprise Edition (WS-C1924-EN) SMARTnet Maintenance
Catalyst 1924 Enterprise Edition (WS-C1924C-EN) SMARTnet Maintenance
See the Catalyst 1900 Web site: http://www.cisco.com/go/1900
79
The Catalyst 2820 series switches,
available in standard and enterprise
editions, provide industry-leading
performance and Cisco end-to-end
network integration at an exceptionally affordable price. Enterprise edition
software enables these switches to deliver unmatched network configuration
flexibility and scalability through embedded Cisco IOS technologies, delivering
comprehensive management and security, bandwidth optimization, networked
multimedia, and virtual LAN (VLAN) support.
When to Sell
Sell This Product
Standard Edition
• Affordable switched Ethernet for larger workgroups
• High-speed module choices with switched and shared 100BaseTX,
100BaseFX, switched FDDI, and ATM
• Dynamic multicast management support (CGMP)
• Software upgradability to enterprise edition features
Enterprise Edition
• End-to-end ISL VLANs
• Bandwidth aggregation with Fast EtherChannel technology
• Up to 64 emulated LANs (ELANs)
Key Features
• Increases performance of Ethernet workgroups that require 100BaseTX,
100BaseFX, FDDI, or ATM connectivity to servers and backbones
• CollisionFree operation for full-duplex 100BaseT, providing up to
200-Mbps bandwidth and extended distances using fiber cabling
• Web-based interface for ease of installation and administration
• Up to 370-Mbps maximum forwarding bandwidth and 550,000
packets-per-second (pps) aggregate packet-forwarding rate (64-byte
packets)
• Telnet and SNMP support for in-band management and a menu-driven,
out-of-band management console
• CGMP for dynamic and selective forward routed IP multicast traffic to
target multimedia end stations, reducing overall network traffic
• Embedded RMON software agents that support four RMON groups
(history, statistics, alarms, and events)
• Cisco IOS CLI (enterprise edition)
• Bandwidth aggregation through Fast EtherChannel enhances fault
tolerance and offers up to 400 Mbps of bandwidth between switches and
routers and individual servers (enterprise edition)
80
Specifications
Feature
Catalyst 2822
Catalyst 2828
Fixed Ports
(connections)
24-port (10BaseT)
1-port (AUI)
24-port (10BaseT)
1-port (AUI)
Modular Slots
2
2
Available Modules
1-port 100BaseTX
8-port 100BaseTX (shared)
1-port 100BaseFX
4-port 100BaseFX (shared)
FDDI fiber DAS
FDDI fiber SAS
FDDI UTP SAS (CDDI)
ATM UTP
ATM MMF
ATM 155 single-mode medium-reach fiber
ATM 155 single-mode long-reach fiber
Same as Catalyst 2822
Backplane
1 Gbps
1 Gbps
Stackable
No
No
Full Duplex
Capabilities
Maximum Number of 2000
Addresses
8000
VLAN Maximum
Up to four overlapping bridge groups or 1024 ISL
VLANs
Up to four overlapping bridge groups or 1024 ISL
VLANs
FEC
Yes
Yes
ISL
Yes
Yes
Management
Capabilities
SNMP, out-of-band, Telnet, RMON, Cisco Visual
Switch Manager Web-based interface, CWSI, ATM
Director™, CiscoView, StackView/Stack Maker
Processor
80486 CPU
80486 CPU
Flash Memory
1 MB
1 MB
DRAM
2 MB
2 MB
Embedded RMON
Dimensions (HxWxD) 3.43 x 17.5 x 12.4 in.
3.43 x 17.5 x 12.4 in.
Service Category
• 3Com: SuperStack Switch 1100
81
Catalyst 2820 Series Standard Edition1
WS-C2822-A
WS-C2828-A
24-port 10bT + 2-slots- 2K MAC, Enterprise Upgradeable
24-port 10bT + 2-slots- 8K MAC, Enterprise Upgradeable
Catalyst 2820 Series Enterprise Edition
WS-C2822-EN
WS-C2828-EN
24-port 10bT + 2-slots- 2K MAC, Enterprise Edition
24-port 10bT + 2-slots- 8K MAC, Enterprise Edition
Catalyst 2820 Series Modules
WS-X2811
WS-X2818
WS-X2821
WS-X2824
WS-X2831
WS-X2841
WS-X2842
WS-X2851
WS-X2861
WS-X2871
WS-X2872
1-port 100bT Module for Catalyst 282x
8-port 100bTX Module for Catalyst 282x
1-port 100bFX Module for Catalyst 282x
4-port 100bFX Module for Catalyst 282x
1-port FDDI Module for Catalyst 282x- UTP SAS
1-port FDDI Module for Catalyst 282x- Fiber SAS
1-port FDDI Module for Catalyst 282x- Fiber DAS
1-port ATM Module for Catalyst 282x- 155 UTP
1-port ATM Module for Catalyst 282x- 155 Multimode Fiber
1-port ATM Module for Catalyst 282x- 155 Single-mode Fiber (Medium Range)
1-port ATM Module for Catalyst 282x- 155 Single-mode Fiber (Long Range)
Catalyst 2820 Series Upgrade Kits
WS-C19/28EEUG
WS-C19/28UG10
Catalyst 1900/2820 Enterprise Edition Upgrade Kit
Catalyst 1900/2820 Enterprise Edition Upgrade Kit—10 Licenses
CON-SNT-PKG2
CON-SNT-PKG3
Catalyst 2820 Series Standard Edition SMARTnet Maintenance
Catalyst 2820 Series Enterprise Edition SMARTnet Maintenance
82
The Cisco standalone Catalyst 2900
series switches provide 10/100
autosensing and autonegotiating
interfaces for enterprise level
high-speed configuration flexibility in
the wiring closet. The Catalyst 2900
series is ideal for Ethernet workgroups and individual users who want the
investment protection of 10BaseT and 100BaseTX connectivity alternatives
without the need to replace wiring closet network devices. This product series
also provides dual high-speed 100BaseTX (with MII alternative) or 100BaseFX
uplinks for wiring closet riser connections to the backbone, or to servers.
When to Sell
Sell This Product
Catalyst 2901
• Operations require advanced enterprise IOS services (resiliency,
multicasting, management, scalability)
• 10/100 autosensing, autoconfiguring switching with 100BaseTX uplinks
• VLAN trunking on every port
Catalyst 2902
• Operations require advanced enterprise IOS services (resiliency,
multicasting, management, scalability)
• 10/100 autosensing, autoconfiguring switching with 100BaseFX uplinks
• VLAN trunking on every port
Catalyst 2926
• High-density 10/100 autosensing, autoconfiguring switching
• High-end enterprise features (Catalyst 5000 family code image and
interfaces)
• Fast EtherChannel port aggregation (up to 800 Mbps) with load
balancing, fault detection, and intelligent fail-over
Key Features
• Enhanced Switched Port Analyzer (SPAN) functionality enables the user to
mirror traffic on any port or VLAN
• Support for load balancing using VLANs and spanning tree on multiple
parallel Fast Ethernet ISL trunks
• Complete VLAN solution that is easy to configure and manage
• Full SNMP management
83
Specifications
Feature
Catalyst 2901
Catalyst 2902
Catalyst 2926
Fixed Ports
(connections)
2-port 100BaseTX (MII)
12-port 10/100 autosensing
2-port 100BaseTX (MII)
12-port 100BaseFX (MMF)
2-port 100BaseTX or 100BaseFX
24-port 10/100 autosensing
Backplane
1.2 Gbps
1.2 Gbps
1.2 Gbps
Stackable
No
No
No
Full-Duplex Capabilities All ports
All ports
All ports
VLAN Maximum
1000
1000
1000
FEC
No
No
IFEC on 2 Fast EtherChannel
uplinks
ISL
2-port 100BaseTX (MII
alternative) uplinks (ISL only)
ISL (all)
2-port 100BaseTX (MII
Ethernet uplinks (TX or FX)
alternative) uplinks (ISL only) ISL (uplinks)
plus 12-port 10/100BaseFX with
ISL (MMF, SC interfaces)
ISL (all)
Management
Capabilities
Inboard console via terminal or Same as Catalyst 2901
modem, outboard via Telnet,
SNMP, CiscoView, CWSI
Processor Speed (Type) 25 MHz (C68EC040)
25 MHz (C68EC040)
25 MHz (C68EC040)
Flash Memory
4 MB
4 MB
8 MB
DRAM
8 MB
8 MB
16 MB
Embedded RMON
Statistics, history, alarms,
events
events
events
Dimensions (HxWxD)
3.4 x 17.25 x 23 in.
3.4 x 17.25 x 23 in.
5.75 x 17 x 18 in.
Service Category
8
10
10
• 3Com: SS3300
• Bay Networks: BayStack 350T and 450T
• Cabletron: SmartSwitch 6000
Catalyst 2900 Series Chassis1
WS-C2901
WS-C2902
WS-C2926F
WS-C2926T
12-port 10/100 (Autosensing, UTP) + 2-port 100bTX
12-port 100bF (SC) + 2-port 100bTX
24-port 10/100 (Autosensing, RJ-45) + 2-port 100bFX
24-port 10/100 (Autosensing, RJ-45) + 2-port 100bTX
Catalyst 2900 Series Software Licenses
WS-C2900-EMS-LIC
WS-C2926-EMS-LIC
Catalyst 2900 RMON Agent License
Catalyst 2926 RMON License
CON-SNT-PKG8
CON-SNT-PKG10
Catalyst 2901 SMARTnet Maintenance
Catalyst 2902and 2926 SMARTnet Maintenance
84
Cisco Catalyst 2900 Series XL
Cisco’s Catalyst 2900 Series XL is a
full line of 10/100 autosensing Fast
Ethernet switches that offer
outstanding performance, versatile
modularity, and easy-to-use management.
When to Sell
Sell This Product
Catalyst 2908 XL
• Switch for connecting smaller Ethernet and Fast Ethernet workgroups
or servers
• Low entry price
Catalyst 2924 XL or
Catalyst 2924C XL
• Dedicated 10-Mbps or 100-Mbps connections to individual PCs, servers,
and other systems
• High-speed uplink flexibility over extended distances with 100BaseFX
connections (Catalyst 2924C XL only)
• Low per-port cost
Catalyst 2916M XL
• Any combination of dedicated 10-Mbps or 100-Mbps connections to
individual PCs, servers, and other systems or connectivity between
existing Ethernet and Fast Ethernet workgroups
• The option to easily increase the switch’s port density and provide
inexpensive high-speed uplinks through bandwidth aggregation (Fast
EtherChannel technology)
• Future Gigabit Ethernet and ATM interface modules for high-speed links
• Hot swap insertion and removal of modules
• Maximum flexibility
Key Features
• Switch fabric of 3.2 Gbps, a forwarding rate of more than 3.0 million
packets per second, and a maximum forwarding bandwidth of 1.6 Gbps,
delivering wire-speed performance across all ports
• Cisco Visual Switch Manager, a web-based interface for switch
management from anywhere on the network through a standard Web
browser
• Up to 64 port-based VLANs (non-ISL trunks)
• Multilevel security on console access, preventing unauthorized users from
altering switch configuration
• Network port allows operation in networks with unlimited MAC addresses
• Autoconfiguration of multiple switches on a network from one boot server
• Up to 800 Mbps bandwidth between routers, switches, and servers with
Fast EtherChannel technology
• CGMP, enabling a switch to dynamically and selectively forward routed IP
multicast traffic to target end stations
85
Specifications
Feature
Catalyst 2908 XL
Catalyst 2916M XL Catalyst 2924 XL
Catalyst 2924C XL
Fixed Ports
8-port 10/100
autosensing
16-port 10/100
autosensing
24-port (22 10/100 ports
autosensing and 2 ports
100BaseFX)
Modular Slots
None
2
None
None
Available
Modules
None
4-port switched
10BaseT/100BaseTX
autosensing
2-port switched
100BaseFX
None
None
Backplane
3.2 Gbps
3.2 Gbps
3.2 Gbps
3.2 Gbps
Stackable
No
No
No
No
Full Duplex
Capabilities
All ports
All 10BaseTX, 100BaseTX, All ports
100BaseFX ports
All ports
VLAN
Maximum
64-port-based VLANs
64-port-based VLANs
64-port-based VLANs
64-port-based VLANs
FEC
Yes
Yes
Yes
Yes
ISL
No
Future
No
No
Management
Capabilities
SNMP, Telnet, RMON,
CWSI, (CLI)-based
out-of-band, embedded
Cisco Visual Switch
Manager Web-based
interface
Same as Catalyst 2908 XL
Same as Catalyst 2908 XL Same as Catalyst 2908 XL
Processors
Cisco designed ASICs,
Power PC 403C
Power PC 403C
Power PC 403C
Power PC 403C
Flash Memory
2 MB
2 MB
2 MB
2 MB
CPU DRAM
4 MB
4 MB
4 MB
4 MB
Embedded
RMON
History, Events, Alarms,
Statistics
History, Events, Alarms,
Statistics
History, Events, Alarms, History, Events, Alarms,
Statistics
Statistics
Dimensions
(HxWxD)
1.73 x 17.5 x 10 in.
1.73 x 17.5 x 12 in.
1.75 x 17.5 x 14.25 in.
1.75 x 17.5 x 14.25 in.
Service
Category
3
3
3
3
• 3Com: SuperStack II Switch 3300
86
24-port 10/100
autosensing
Catalyst 2900 Series XL Chassis1
WS-C2908-XL
WS-C2916M-XL
WS-C2916M-XL-5PACK
WS-C2924-XL
WS-C2924-XL-5PACK
WS-C2924C-XL
WS-C2924C-XL-5PACK
8-port 10/100 Autosensing Switch
16-port 10/100 Autosensing Switch with 2 Modular Slots
Five Catalyst 2916M-XL Switches
24-port 10/100 Autosensing Switch
Five Catalyst 2924 XL Switches
24-port Switch with 22 10/100 Ports + 2 100bFX Ports
Five Catalyst 2924C XL Switches
Catalyst 2900 Series XL Modules
WS-X2914-XL
WS-X2922-XL
4-port 10/100bTX Module for Catalyst 2916M XL
2-port 100bFX Module for Catalyst 2916M XL
Catalyst 2900 Series XL Basic Maintenance
CON-SNT-PKG3
Catalyst 2900 Series XL SMARTnet Maintenance
See the Catalyst 2900 Series XL Web site: http://www.cisco.com/go/2900xl
87
The Catalyst 3000 series provides a
stackable switching architecture that
delivers Layer 2 and Layer 3 stackable
software and VLAN switching for
growing workgroup applications. The
Catalyst 3000 series allows you to
deploy switches in a variety of
applications and protect your
investment. Greater switching capacity
or multilayer traffic management
functions can be added through a
flexible, cost-effective, stackable architecture.
When to Sell
Sell This Product
Catalyst 3016
• Switched media workgroup solutions
• Modular investment protections
• Stackable scalability up to 224 ports
Catalyst 3100
• Switched 10 wiring closet fanouts for shared-media hub displacement
• 2- to 8-switch stacking (single IP address management)
• WAN router integration
Catalyst 3200
• Broad media interface flexibility (10BaseFL, 10Base2, 10BaseT,
100BaseFX, 100BaseTX, ATM, WAN router)
• Rich enterprise feature linkages (ISL, CDP, VTP)
• Legacy fiber and protocol support
Key Features
• Delivers media-rate switching
• Powerful software featuring “plug-and-play” expansion of switching
capacity
• Stacking software provides network resilience and supports automatic
switch reconfiguration
• Adaptive cut-through switching technology that delivers wire-speed,
low-latency switching
• Stackable up to 8 switches
88
Specifications
Feature
Catalyst 3016
Catalyst 3100
Catalyst 3200
Fixed Ports
(connections)
16-ports Ethernet (10BaseT)
24-ports Ethernet (10BaseT)
None
Modular Slots
2 modular slots
1 stack slot
1 flex slot
1 stack slot
6 modular slots
1 flex slot
Available Modules
3-port 10Base2- BNC Coaxial
4-port 10BaseT
3-port 10BaseFL
1-port 100BaseTX, RJ-45
2-port 100BaseTX, ISL, UTP, RJ-45
1-port 100BaseFX
2-port 100BaseFX, ISL, Multimode Fiber, SC
2-port 100VG-TX, UTP, RJ-45
2-port 100VG-FX, Multimode Fiber, ST
Stack Port
WAN Router
Backplane
480 Mbps
480 Mbps
480 Mbps
Stackable
Up to 8 using Stack Port Module
Stack any combinations of 3016, 3100, 3200
Full-Duplex
Capabilities
Yes
Yes
Yes
VLAN Maximum
64
64
64
ISL
2-port 100BaseT and 100BaseF modules
only
Management
Capabilities
SNMP, RMON, Telnet, CiscoView, CWSI
Embedded RMON
Dimensions
(HxWxD)
3.5 x 17 x 13.4 in.
3.5 x 17 x 16.8 in.
6 x 17.25 x 13.75 in.
Service Category
7
7
8
• 3Com: SS3000 and SS3300
• Bay Networks: BS350T, BS450T
• Cabletron: Smartswitch 2000
89
WS-C3016B
WS-C3100B
WS-C3200B
WS-X3011-CH
16-port 10bT, 2-slots, 1 Stack slot- Full Duplex, EtherChannel
24-port 10bT + 1 Flex slot, 1 Stack slot
6-slots, 1 Flex slot (Accepts WAN Router Module), 1 Stack slot
WAN Router Module- 8 MB Flash, 4 MB DRAM, IP Software
Catalyst 3000 Family Modules
WS-X3013=
WS-X3002=
WS-X3003=
WS-X3001=
WS-X3010=
WS-X3005=
WS-X3009=
WS-X3007=
WS-X3008=
WS-X3004=
WS-C3020
WS-X3021=
WS-X3011-CH
3-port 10b2- BNC Coaxial
4-port 10bT Module
3-port 10bFL Module
1-port 100bTX Module- RJ-45
2-port 100bTX Module- ISL, UTP, RJ-45
1-port 100bFX Module
2-port 100bFX Module- ISL, Multimode Fiber, SC
2-port 100VG-FX Module- Multimode Fiber, ST
2-port 100VG-TX Module- UTP, RJ-45
Stack Port Module
Catalyst Matrix
Catalyst Matrix Redundant Component
WAN Router Module - 8 MB Flash, 4 MB DRAM, IP Software
WS-C3000-EMS-LIC
WS-C3100-EMS-LIC
WS-C3200-EMS-LIC
Catalyst 3000 Series Upgrades
WS-X3428
Catalyst 3016 Memory Upgrade to 8MB
CON-SNT-PKG7
CON-SNT-PKG8
Catalyst 3016 and 3100 SMARTnet Maintenance
90
Cisco’s Catalyst 3900 series are
second-generation Token Ring
switches that combine media-rate
performance with a variety of
high-speed uplinks, extensive network
management, and support for multiple
virtual LANs at a price per port that
makes the family an ideal choice for backbone, workgroup, and desktop use.
The Catalyst 3900 is a stackable switch that offers 20 fixed ports, a stack port,
and a unique FlexSlot that supports one double-wide card or up to two feature
cards that can provide additional Token Ring ports or high-speed uplinks. The
Catalyst 3920 offers 24 fixed Token Ring ports and can also be stacked together
either with other Catalyst 3920 units or with the Catalyst 3900.
When to Sell
Sell This Product
Catalyst 3900
• To relieve congestion in existing bridges, server rings, and backbone
rings with micro-segmentation and direct server attachment
• To replace existing shared-media hubs to improve performance
• To update the backbone infrastructure to ATM or ISL and support
multiple VLANs
Catalyst 3920
• To provide switching to the desktop at a price competitive to shared
hubs but with the performance and manageability characteristics of the
second generation Catalyst 3900 series
• To add additional low-cost ports to an existing Catalyst 3900 stack
• As a remote branch Token Ring solution in combination with Cisco Token
Ring attached router
Key Features
• Stackable up to eight switches (up to 224 ports)
• Expandable configuration (Catalyst 3900)
• Source-route switching (SRS), source-route bridging (SRB), source-route
transparent bridging (SRT) switching/bridging modes
• Flexible port operation
• Two priority queues for traffic
• VLAN support
• Highest performance in the industry (Tolly Group Industry Study)
91
Specifications
Feature
Catalyst 3900
Catalyst 3920
Fixed Ports
20-port Token Ring
24-port Token Ring
Modular Slots
2
None
Available Modules
4-port Token Ring (UTP/STP, RJ-45)
4-port Token Ring (MMM, ST)
1-port ATM (MMM, SC)
2-port 100BaseTX with ISL (UTP, RJ-45)
2-port 100BaseFX with ISL (MMF, SC)
None
Backplane
520 Mbps
520 Mbps
Stackable
2 switches can be stacked back-to-back by
direct cabling; up to 8 switches (any mix of
3900s or 3920s) can be stacked using the
Catalyst 3020 Matrix Switch
Full-Duplex Capabilities
All ports
All ports
VLAN Maximum
63
63
ISL
2-port fiber or copper
None
Management Capabilities
SNMP and out-of-band console, Telnet,
CiscoView, TrafficDirector™ software
SNMP and out-of-band console, Telnet,
CiscoView, TrafficDirector software, CWSI
Embedded RMON
With optional RMON feature
With optional RMON feature
Dimensions (HxWxD)
3.4 x 17.4 x 15.3 in.
1.7 x 17.4 x 11.1 in.
Service Category
9
6
• Bay Networks: Centillion 100/50T and System 5000/5005
• IBM: 8272/8270
• Madge: SmartSwitch Plus
• Olicom: OC-8600/8601
WS-C3900
WS-C3920
Catalyst 3900 20-port Token Ring Switch
Catalyst 3920 24-port Token Ring Switch
Catalyst 3900 Series Modules
WS-C3900-2ISL=
WS-C3900-2ISLF=
WS-C3900-4R=
WS-C3900-4RF=
WS-C3900-ATMSC=
WS-C3900-STACK=
2-port 100BaseTX with ISL (UTP, RJ45)
2-port 100BaseFX with ISL (MMF, SC)
4-port Token Ring (UTP/STP, RJ45)
4-port Token Ring (MMF, ST)
1-port 155 Mbps ATM (MMF, SC)
Catalyst 3900 Stack Port Module
WS-C3900-EMS-LIC
CON-SNT-PKG9
CON-SNT-PKG6
See the Catalyst 3900 series Web site: http://www.cisco.com/go/3900
92
Cisco Catalyst 5500/5000 Series
Cisco Systems’ flagship Catalyst 5500/5000
series switches are the industry’s most
powerful switching solutions in the
wiring closet, data center, or backbone.
The series features a Gigabit Ethernet
and ATM-ready platform that offers
users high-speed trunking technologies
and media-rate performance with a broad variety of interface modules.
When to Sell
Sell This Product
Catalyst 5000
• Desktop/server connectivity
• Five slots—up to 192 user ports
Catalyst 5002
• Workgroup connectivity
• Two slots—up to 48 user ports
Catalyst 5500
• Catalyst 8510/LightStream 1010 features and line-card support
• Gigabit Ethernet
• Full system redundancy
• High density (13 slots—up to 528 user ports)
Catalyst 5505
• Gigabit Ethernet (high-performance desktop/server connectivity)
• Five slots—up to 192 user ports
Catalyst 5509
• High-performance desktop/server switching
• High-density Gigabit Ethernet up to 38 ports
• Nine slots—up to 384 user ports
Key Features
• High-speed connectivity using standard Gigabit Ethernet, Fast Ethernet,
Token Ring, FDDI, or ATM
• Multilayer switching
• Dual redundant switching engines, power supplies, and a passive backplane
design ensure full system redundancy for mission-critical environments
• Fast EtherChannel or Gigabit EtherChannel support
• Support for all advanced features of Cisco IOS software
• Any-to-any switching (that is, any media to any media—Token Ring to
ATM, Gigabit to ATM, FDDI to ATM, and so forth)
• Cisco’s VTP supports dynamic VLANs and dynamic trunk configuration
across all switches
93
Specifications
Catalyst 5000
Catalyst
5002
Modular Slots
5
2
Available
Modules
Supervisor module1 with two
Same as Catalyst
embedded Fast Ethernet ports
5000
plus any combination of the
following modules:
48-port Group Switched 10bT Eth
48-port Switched 10bT Eth (RJ-21)
24-port Switched 10bT Eth (RJ-45)
12-port Switched 10bFL Ethernet
24-port Group Switched 100bTX
Ethernet
24-port Switched 10/100bTX
Backbone Fast Ethernet
24-port Switched 10/100bTX
Desktop Fast Ethernet
12-port Switched 100bFX Fast Eth
16-port Switched Token Ring
Copper
16-port Switched Token Ring
Fiber
1-port CDDI/FDDI
1-port dual PHY ATM LAN
Emulation OC-3 or OC-12
Same as Catalyst Same as Catalyst Same as Catalyst
5000
5000
5000 plus:
LightStream 1010
Catalyst 8510
Backplane
1.2 Gbps
1.2 Gbps
3.6 Gbps
ATM switching:
5-Gbps
backplane
3.6 Gbps
3.6 Gbps
Stackable
No
No
No
No
No
Full-Duplex
Capabilities
All Ethernet, Fast Ethernet, Token Same as Catalyst Same as Catalyst Same as Catalyst Same as Catalyst
Ring, and ATM ports
5000
5000
5000
5000
Feature
VLAN Maximum Spanning tree: Yes per VLAN
Catalyst
5500
Catalyst
5505
Catalyst
5509
13
5
9
1000 VLANs
Same as Catalyst Same as Catalyst Same as Catalyst Same as Catalyst
5000
5000
5000
5000
FEC
24 100BaseTX/ FEC switching
12 100BaseFX/ FEC switching
Same as Catalyst Same as Catalyst Same as Catalyst Same as Catalyst
5000
5000
5000
5000
Management
Capabilities
Inboard console via terminal or Same as Catalyst Same as Catalyst Same as Catalyst Same as Catalyst
modem, outboard via Telnet,
5000
5000
5000
5000
SNMP, CiscoView, CWSI
Statistics, history, alarms, events
Dimensions
(HxWxD)
10.4 x 17.21 x 18.14 in.
5.75 x 17 x 18 in. 15.2 x 17.3 x 18.2 in. 10.4 x 17.2 x 18.14 in. 20 x 17.25 x 18.4 in.
Service
Category
13
9
1. Supervisor module(s) require a slot in the chassis.
• 3Com: Corebuilder 5000
• Bay Networks: Accelar 1000 Series
• Cabletron: SmartSwitch 6000
94
16
13
13
Catalyst 5002/5000/5500 Series Chassis1
WS-C5002=
WS-C5007=
WS-C5507=
WS-C5509-CHAC=
WS-C5509-CHDC=
2-slot Chassis w/Dual Power Supplies
5-slot Chassis w/One Power Supply
13-slot Chassis w/One AC Power Supply
Catalyst 5509 Spare Chassis with One AC Power Supply
Catalyst 5509 Spare Chassis with One DC Power Supply
Catalyst 5002/5000/5500 Series Wiring Closet Bundles
WS-C5000-HDT
WS-C5505-HDT
WS-C5509-HDT
WS-C5500-HDT
WS-C5000-HDF
WS-C5505-HDF
WS-C5509-HDF
WS-C5500-HDF
WS-C5000-WCTX
WS-C5505-WCTX
WS-C5509-WCTX
WS-C5500-WCTX
WS-C5000-WCFX
WS-C5505-WCFX
WS-C5509-WCFX
WS-C5500-WCFX
WS-C5505-E1-GESX
WS-C5509-E1-GESX
WS-C5500-E1-GESX
WS-C5505-S3-HD
WS-C5509-S3-HD
WS-C5500-S3-HD
WS-C5505-S3
WS-C5509-S3
WS-C5500-S3
WS-C5000, WS-C5008B, WS-X5509, WS-X5224
WS-C5505, WS-C5008B, WS-X5509, WS-X5224
WS-C5509, WS-C5518, WS-X5509, WS-X5224
WS-C5500, WS-C5508, WS-X5509, WS-X5224
WS-C5000, WS-C5008B, WS-X5506, WS-X5224
WS-C5505, WS-C5008B, WS-X5506, WS-X5224
WS-C5509, WS-C5518, WS-X5506, WS-X5224
WS-C5500, WS-C5508, WS-X5506, WS-X5224
WS-C5000, WS-C5008B, WS-X5509
WS-C5505, WS-C5008B, WS-X5509
WS-C5509, WS-C5518, WS-X5509
WS-C5500, WS-C5508, WS-X5509
WS-C5000, WS-C5008B, WS-X5506
WS-C5505, WS-C5008B, WS-X5506
WS-C5509, WS-C5518, WS-X5506
WS-C5500, WS-C5508, WS-X5506
WS-C5505, WS-C5008B, WS-X5534-E1-GESX
WS-C5509, WS-C5518, WS-X5534-E1-GESX
WS-C5500, WS-C5508, WS-X5534-E1-GESX
WS-C5505, WS-C5008B, WS-X5530-E2, WS-X5224
WS-C5509, WS-C5518, WS-X5530-E2, WS-X5224
WS-C5500, WS-C5508, WS-X5530-E2, WS-X5224
WS-C5505, WS-C5008B, WS-X5530-E2
WS-C5509, WS-C5518, WS-X5530-E2
WS-C5500, WS-C5508, WS-X5530-E2
Catalyst 5500 Series Bundles with Supervisor III
WS-C5500-S3-HD 16
WS-C5509-S3-HD 15
WS-C5509-S3 15
WS-C5505-S3-48
WS-C5500, Sup Eng III, WS-X5224, Power Supply
WS-C5509, Sup Eng III, WS-X5224, Power Supply
WS-C5509, Sup Eng III, AC Power Supply
WS-C5500, Sup Eng III w/ NFFC, 48-ports 10/100, + 2 x GE
Catalyst 5002/5000/5500 Series Supervisor Engines
WS-X5009=
WS-X5509=
WS-X5005=
WS-X5006=
WS-X5506=
WS-X5509-BOOT=
WS-X5530-BOOT=
Catalyst 5000 Supervisor Engine
Catalyst 5500 Supervisor- 100bTX & MII- Spare
Catalyst 5000 Supervisor- 100bFX (Singlemode Fiber)
Catalyst 5000 Supervisor- 100bFX (Multimode Fiber)
Catalyst 5500 Supervisor- 100bFX (Multimode Fiber)- Spare
Catalyst 5XXX Sup Eng II Boot ROM Kit (spare)
Catalyst 5XXX Sup Eng III Boot ROM Kit (spare)
Catalyst 5002/5000/5500 Series Modules
WS-X5010=
WS-X5013=
WS-X5012=
WS-X5012A=
WS-X5012A-3PACK=
WS-X5014=
WS-X5223=
WS-X5020=
WS-X5213A=
WS-X5203=
WS-X5224=
WS-X5225R=
WS-X5011=
WS-X5111=
WS-X5114=
WS-X5201=
24-port 10bT Switching Module
24-port 10bT Switching Module- RJ-45
48-port 10bT Switching Module
48 Port 10BT Desktop Ethernet Switching Module (telco, spare)
Three Pack of WS-X5012, Telco (3x48 port)
48 Port 10BT Desktop Ethernet Switching Module (RJ-45,spare)
24-port 10bT Group Switching Module
48-port 10bT Group Switching Module
12-port 10/100 Module- Autosensing, RJ-45
12-port 10/100 Fast EtherChannel Module- Autosensing, RJ-45
24-port 10/100 Switching Module- Autosensing
24-port 10/100 Backbone Switching Module- Autosensing
12-port 10bFL Switching Module
1-port 100bFX- Fiber, SC
12-port 100bFX- 6 Multimode, 6 Singlemode
12-port 100bFX Fast EtherChannel Module- SC, Multimode
95
WS-X5201R=
WS-X5403=
WS-X5410=
WS-G5484=
WS-U5536-GELX=
WS-X5030=
WS-X5031=
WS-X5101=
WS-X5103=
WS-X5104=
WS-X5156=
WS-X5157=
WS-X5158=
WS-X5161=
WS-X5162=
WS-X5167=
WS-X5168=
WS-C5514-CL=
12-port 100bFX Backbone Switching Module
3-port Gigabit Ethernet Switching Module
9-port Gigabit Etherchannel Switching Module
1000BASE-SX short wavelength GBIC- Multimode only
2-port 1000Base-LX SMF Uplink Mod For Supvr Engine III
16-port Token Ring Switch Module- Copper
16-port Token Ring Switch Module- Fiber
1-port FDDI Switching Module- Multimode, MIC
1-port CDDI Switching Module- UTP, RJ-45
1-port FDDI Switching Module- Singlemode, ST
2-port ATM LANE Module- Dual Phy, UTP
2-port ATM LANE Module- Dual Phy, SC, Singlemode Fiber
2-port ATM LANE Module- Dual Phy, SC, Multimode Fiber
1-port ATM OC-12 Module- Dual Phy, Multimode Fiber
1-port ATM, OC-12 Module- Dual Phy, Singlemode Fiber
1-port ATM OC-3 LANE/MPOA, Dual PHY, Multimode, SC
1-port ATM OC-3 LANE/MPOA, Dual PHY, Singlemode, SC
Catalyst 5505/5509 Backplane Clock Module
Catalyst 5002/5000/5500 Bundled Modules
WS-X5012-3PACK=
WS-X5012A-3PACK=
WS-X5014-3PACK=
WS-X5224-3PACK=
Three Pack of WS-X5012, 3x48-ports (Telco)
Three Pack of WS-X5012, Telco (3x48 port)
Three pack of WS-X5014, RJ-45 (3x48 port)
Three Pack of WS-X5224=, 3x24-ports (RJ-45)
Catalyst 5500 Series Supervisor III Modules
WS-F5521=
WS-U5531-FETX=
WS-U5533-FEFX-MMF=
WS-U5535-FEFX-SMF=
WS-U5534-GESX=
WS-X5530-E1=
WS-X5530-E2=
Supervisor III NetFlow Feature Card
2-port 100bTX Module for Sup Engine III
2-port 100bFX (Multimode Fiber) Module for Sup Engine III
2-port 100bFX (Singlemode Fiber) Module for Sup Engine III
2-port 1000BaseSX Module for Sup Engine III
5002/5000/5500 Sup Engine III w/out Uplink Module
5002/5000/5500 Sup Engine III w/ NFFC
Catalyst 5002/5000/5500 Series Software
SWC5K-BEFS-4X-UG
SWC5K-BEFS-4X=
WS-C5K-EMS-LIC
WS-C5002-EMS-LIC
WS-C5500-EMS-LIC
WS-C5505-EMS-LIC
WS-C5509-EMS-LIC
Catalyst 5K Rel. 4.x S/w License- Enhanced Feature Set, Upgd
Catalyst 5K Rel. 4.x S/w License- Enhanced Feature Set (spare)
Catalyst 5000/5500 Series Accessories
WS-C5099=
WS-C5599=
WS-C5509-RACK=
WS-C5508=
WS-C5008B=
WS-C5518=
WS-C5598=
WS-C5509-FAN=
Catalyst 5000 Rack Mount Kit
Catalyst 5500 Rack Mount Kit
Catalyst 5509 Rack Mount Kit and Cable Organizer
Catalyst 5500 AC Power Supply
Catalyst 5000/5505 AC Power Supply
Catalyst 5509 AC Power Supply (spare)
Catalyst 5509 DC Power Supply (spare)
Catalyst 5509 Fan Tray (spare)
Catalyst 5500/5000 Series Basic Maintenance
CON-SNT-PKG13
CON-SNT-PKG9
CON-SNT-PKG16
CON-SNT-PKG15
Catalyst 5000 and 5505 SMARTnet Maintenance
See the Catalyst 5500/5000 series Web site: http://www.cisco.com/go/5000
96
Cisco Catalyst 8500 Switch Routers
Cisco Catalyst 8500 Switch Routers1
The Cisco Catalyst 8500 series of campus switch
routers provide wire-speed, nonblocking IP, IPX, and
IP multicast Layer 3 switching while providing
advanced QoS features. The Catalyst 8500 series are
designed to meet the high-performance requirements
of the campus backbone and offer multiple interface
options in a modular chassis. The Catalyst 8500
series consists of the modular Catalyst 8510
(10-Gbps 5-slot) switch and the modular Catalyst
8540 (40-Gbps 13-slot) switch. Both switches
implement Cisco IOS software to provide a variety of
network services, including reliability, security, management, and QoS with
CiscoAssure policy networking.
Key Features
• Ideal for aggregating multiprotocol traffic from multiple wiring closets or
from workgroup switches such as the Catalyst 5000/5500
• Provides nonblocking routing for IP, IPX, and IP multicast while also
offering wire-speed Layer 2 switching for nonroutable protocols such as
NetBIOS and DECnet local-area transport (LAT)
• Aggregate throughput of 6 million packets per second (pps) for both
Layer 2 and Layer 3 switching
Specifications
Feature
Catalyst 8510
Fixed LAN Ports
1-port Ethernet (for out-of-band management) 1-port Ethernet (for out-of-band management)
Catalyst 8540
Fixed WAN Ports
2-port serial (EIA/TIA-232)
2-port serial (EIA/TIA-232)
Modular Slots
5
13
Stackable
No
No
Shared Memory
10 Gbps
40 Gbps
Flash Memory
8 MB (default)
20 MB (maximum)
8 MB (default)
20 MB (maximum)
DRAM
32 MB
64 MB
Power Supply
Optional redundant power supplies
Optional redundant power supplies
Dimensions (HxWxD)
10.5 x 17.2 x 18.14 in.
25.25 x 17.3 x 18.25 in.
See the 8500 series Web site: http://www.cisco.com/go/8500
97
Cisco 1500 Series Micro Hubs
Cisco 1500 Series Micro
Hubs
The Cisco 1500 series Micro Hub
family provides economical,
scalable, 10-Mbps Ethernet hubs
for creating LANs in small offices.
A single Cisco 1500 Micro Hub can create an Ethernet LAN that connects up
to 8 or 16 devices. Up to five 10-Mbps hubs can be stacked to create a single
manageable stack.
The Cisco 1500 Micro Hub is part of the Cisco Networked Office stack family
of products designed to provide integrated, secure networking solutions for
small businesses and small branch offices.
When to Sell
Sell This Product
Cisco 1502
• Remote management only (via a Cisco 1503)
• Ability to create a manageable stack for up to five hubs, supporting 40
users and devices
Cisco 1503
• Remote and local management capabilities
• Ability to create a manageable stack for up to five hubs, supporting 40
users and devices
Key Features
• Color-coded ports on the rear panel of the unit
• Support for CiscoWorks Windows management system
• Automatic partitioning and reconnection to the LAN when excessively long
packets are detected
• Support for up to four units cascaded together
98
Cisco 1500 Series Micro Hubs
Specifications
Feature
Cisco 1502
Cisco 1503
Fixed Ports
(connections)
Modular Slots
None
None
Stackable
5 hubs/40 users and devices
5 hubs/40 users and devices
Management
Capabilities
Configuration Managed
Per port LEDs: Receive
CiscoWorks Windows software for network
management
Configuration Manageable
Per port LEDs: Disabled
CiscoWorks Windows software for network
management
Dimensions (HxWxD)
3.1 x 11.2 x 8.7 in.
3.1 x 11.2 x 8.7 in.
Service Category
1
1
Cisco 1500 Hub Chassis1
CISCO1502-8E
CISCO1503-8M
8-port 10bT Hub - Stackable, Managed
8-port 10bT Hub - Stackable, Managed
CON-SNT-PKG1
See the Cisco 1500 series Micro Hubs Web site: http://www.cisco.com/go/1500
99
Cisco HP 10BaseT Hub-16M
Developed by Hewlett-Packard and
integrated with Cisco IOS technologies,
the HP 10Base-T Hub-16M combines
cost-effective LAN connectivity, security, and integrated management with the
benefits of Cisco IOS technologies. The 10 Mbps shared hub is the ideal complement
to the Cisco Catalyst 1900 and 2820 series Ethernet switches for small
and-medium-sized businesses and enterprise branch offices.
The HP 10Base-T Hub-16M has 16 10BaseT ports for workgroup connectivity, and
one AUI port to connect coaxial or fiber Ethernet cable. The hub also features an
MDI/MDI-X switch on port 16 for inter-hub connectivity without special crossover
cables. Up to four HP 10Base-T Hub-16M units can be cascaded together to create a
single collision domain of up to 58 10BaseT ports. The hub can be connected
upstream to a Catalyst 1900 or 2820 series Ethernet switch in a high-performance
network, or installed as a standalone solution in a small business environment.
This hub has comprehensive hub-level and port-level security features including
intruder prevention, auto port disabling, network management alarm, eavesdrop
prevention, and password protection to prevent unauthorized network access. The
hub also provides intelligent error monitoring through automatic port/segment
partitioning and reconnection for ports experiencing excessive collision problems.
This hub is fully integrated with Cisco 3600 series routers, Catalyst 1900 and
2820 series switches, Catalyst 2900 XL series 10/100 autosensing switches, and
FastHub 200 and 300 series system of modular, stackable LAN and WAN products
through Cisco IOS technologies for guaranteed product interoperability and unified
management. The hub is also equipped with a connector for the Cisco 600-Watt AC
Redundant Power System (RPS) to guarantee maximum uptime.
When to Sell
Sell This Product
Cisco HP 1516
• An economical solution for creating a LAN
• Cisco IOS technologies for seamless integration with other Cisco
switches and routers
• Ability to create a manageable collision domain supporting up to
58 users and devices
Key Features
• MDI/MDI-X switch for inter-hub connectivity without special crossover
cables
• Support for up to four units cascaded together
• SNMP, Telnet, and terminal out-of-band management console for comprehensive
management and troubleshooting
• Comprehensive security features include intruder prevention, eavesdrop prevention,
network management alarm, auto port disabling, and password protection
100
Specifications
Feature
Cisco HP 1516
1-port Ethernet (AUI)
Modular Slots
None
Stackable
No. (Can be cascaded up to 58 users and devices)
Configuration Managed
Per port LEDs: Link Integrity/Receive Activity and Port Enabled/Disabled
Dimensions (HxWxD)
1.7 x 16.8 x 9.4 in.
Service Category
1
• 3Com: SuperStack II PS 12
• Bay: Bay 2813-05
• HP: AdvanceStack 16-U/SNMP Bundle
Cisco HP 1516 Hub Chassis1
CISCO1516M
CON-SNT-PKG1
16-port 10bT - SNMP Managed Repeater
See the Cisco HP 10BaseT Hub Web site: http://www.cisco.com/go/hp16m
101
Cisco 1528 Micro Hub 10/100
The Cisco 1528 Micro Hub 10/100
provides an affordable, simple, autosensing
Fast Ethernet solution for creating
high-performance LANs in small offices
and workgroups. A single Cisco 1528
Micro Hub 10/100 can create a LAN that connects up to eight PCs, printers, servers,
and other devices at either 10 Mbps Ethernet or 100 Mbps Fast Ethernet speeds. The
hub is unmanaged, but provides easy-to-read LED indicators for visual monitoring
and troubleshooting.
The Cisco 1528 Micro Hub 10/100 supports Ethernet and Fast Ethernet users
simultaneously and provides a cost-effective way to migrate to Fast Ethernet.
This hub delivers high-speed data communications necessary for bandwidth
intensive applications.
The Cisco 1528 Micro Hub 10/100 is part of the Cisco Networked Office stack
family of products designed to provide integrated, secure networking solutions
for small businesses and small branch offices.
When to Sell
Sell This Product
Cisco 1528
• A simple, unmanaged, 10/100 autosensing Fast Ethernet hub for LAN
connections in a small office
• Future-proof LANs in anticipation of adding network-intensive
applications
• Shared 10/100 network connections to the Cisco 1600 series router for
WAN access
Key Features
• Eight 10BaseT/100BaseTX autosensing hub ports
• 10 Mbps and 100 Mbps peak aggregate throughput
• Internal bridge function for connecting both 10 Mbps and 100 Mbps devices
• Extensive LEDs for visual management
• One user-selectable MDI/MDI-X port for connecting a compatible hub or switch
without a cross-over cable
• Standalone operation or connection with another 1528 Micro Hub supports up to
14 Ethernet or Fast Ethernet ports in a single collision domain
102
Specifications
Feature
Cisco 1528
8-port Ethernet (10/100BaseT)
Modular Slots
None
Stackable
No. (Can cascade up to 2 hubs for 14 users and devices)
Per port LEDs: Link Integrity/Receive Activity and Port Enabled/Disabled
Dimensions (HxWxD)
3.1 x 11.2 x 8.7 in.
Service Category
1
• 3Com: Baseline 10/100 and Office Connect Switch 400
• Nortel-Bay: Netgear FS508
Cisco 1528 Micro Hub1
CISCO1528U-DS
CON-SNT-PKG1
Cisco 1528 8-port 10/100 Mbps Autosensing Unmanaged Hub
See the Cisco 1528 Micro Hub Web site: http://www.cisco.com/go/1528
103
Cisco FastHub Line
Cisco FastHub Line
The Cisco FastHub line delivers
exceptionally affordable 10/100
and 100-Mbps performance for
enterprise power workgroups,
server farms, or an entire small
and medium-sized business
network. Available in managed,
unmanaged, or manageable
versions, stackable or
standalone, in a range of port
densities, the FastHub line lets
you choose between a variety of
models for lowest cost or
maximum flexibility.
When to Sell
Sell This Product
FastHub 112T, 116T, 124T • Fast Ethernet performance for power workgroups and users
• Lowest per port 10/100 solution (FastHub 112T and 124T)
• Scalability, but management and expandability are not critical
• Smooth migration from 10BaseT to 100BaseTX (FastHub 112T and 124T)
• Power supply redundancy
FastHub 216T
• Fast Ethernet performance for smaller workgroups or server farms
• Integrated management (SNMP, RMON, Telnet, out-of-band console)
FastHub 316T, 316C
• Fast Ethernet performance for enterprise power workgroups or an
entire small to medium-sized business network
• Manageability (SNMP, RMON, Telnet, out-of-band console)
• Expandability, scalability
• Bridging 100BaseT to legacy 10BaseT networks
• Hub interconnections and backbone connections over extended
cabling distances
Key Features
• High-performance, 100-Mbps bandwidth using Category 5 unshielded
twisted-pair (UTP) and fiber cabling
• Class II design for direct interconnection of geographically distributed hubs
or stacks without intermediate switch, bridge, or router
• SNMP, Telnet, terminal-based out-of-band console, and RMON support for
comprehensive management and simplified troubleshooting (FastHub 200
and 300)
• Only 100BaseT hub that provides the addition of port expansion and
management modules in one unit (FastHub 300 series)
104
Feature
FastHub
112T
FastHub
116T
FastHub
124T
FastHub
216T
FastHub
316T
FastHub
316C
Fixed Ports 12-port Ethernet 16-port Ethernet 24-port Ethernet 16-port Ethernet 16-port Ethernet 15-port Ethernet
(10/100BaseTX) (100BaseTX)
(100BaseTX)
(100BaseTX)
(connections) (10/100BaseTX) (100BaseTX)
1-port Ethernet
(100BaseFX)
Modular
Slots
None
None
None
None
2
2
Modules
Available
None
None
None
None
16-port 100bTX
100bTX Bridge
Management
100bFX Bridge
Management
Network
Management
Same as
FastHub 316T
Stackable
No
No
Management Unmanaged
Capabilities Per port LEDs:
Link Integrity,
Receive,
Disabled
No
No
No
No
Unmanaged
Per port LEDs:
Link Integrity,
Receive,
Disabled
System Activity
Meter LEDs
Unmanaged
Per port LEDs:
Link Integrity,
Receive,
Disabled
System Activity
Meter LEDs
Managed
Per port LEDs:
Link Integrity,
Receive,
Disabled
System Activity
Meter LEDs
LEDs for hub and
RPS status
Integrated
management via
Telnet,
out-of-band
console, and
CiscoView
software on a
per-port and
per-hub basis
Same as
Manageable
FastHub 316T
Per port LEDs:
Link Integrity,
Receive,
Disabled
System Activity
Meter LEDs:
Collision and
utilization
LEDs for hub ID,
hub status, and
RPS status
Manageable
(SNMP and
RMON) via
Telnet,
out-of-band
console, and
CiscoView
software on a
per-port, per-hub,
and per-stack
basis
Dimensions
(HxWxD)
1.73 x 17.5 x 8.25 1.73 x 17.5 x 8.25 1.73 x 17.5 x 8.25 1.73 x 17.5 x 8.25 3.43 x 17.5 x 12
3.43 x 17.5 x 12
Service
Category
1
3
1
1
3
3
• 3Com: SuperStack II Hub 100
• BayStack: 203 100BaseTX Hub
• Intel: Express 10/100 Stackable Hub
105
Cisco FastHub Line
Specifications
Cisco FastHub Line
FastHub 100 Family1
WS-C112T
WS-C116T
WS-C124T
12-port 10/100- Autosensing
16-port 100bTX- Unmanaged Repeater
24-port 10/100- Autosensing
FastHub 200 Family
WS-C216T
16-port 100bT Repeater
FastHub 300 Family
WS-C316T
WS-C316C
16-port 100bTX Repeater- Base Unit
16-port 100bTX/100bFX Repeater- Base Unit
FastHub 300 Family Modules
WS-X3116
WS-C316-BMM-C
WS-C316-BMM-T
WS-C316-NMM
100bFX Bridge Management Module
100bTX Bridge Management Module
Network Management Module
FastHub Series Basic Maintenance
CON-SNT-PKG1
CON-SNT-PKG3
FastHub SMARTnet Maintenance for FastHub 112, 116, and 124
FastHub SMARTnet Maintenance for FastHub 216, 316, and 316C
See the FastHub series Web sites:
http://www.cisco.com/go/fh100
106
Security and Internet Products
Product
Features
Page
PIX™ Firewall
Standalone, high-performance firewall appliance
• Secure, real-time embedded system
• Scalable to more than 16,000 simultaneous connections
108
Cisco IOS Firewall
Feature Set
Value-added option that provides advances firewall-specific
capabilities
• Context-based access control (CBAC)
• Real-time alerts notification via e-mail and pager
• Graphical configuration and management via ConfigMaker
110
NetSonar
Network analysis of security vulnerabilities
• Comprehensive data analysis and reporting capabilities
• Scanning of Web servers, firewalls, routers, switches, and
workstations
• User-defined implementation options
112
NetRanger
Real-time intrusion detection system
• Real-time blocking of unauthorized activity
• Transparent to legitimate traffic
• Support for a range of speeds and interface types
• Highly scalable
114
CiscoSecure Software
Product Line
Software that supports Cisco’s dial access solutions
• CiscoSecure access control server (ACS) for UNIX
• CiscoSecure ACS for Windows NT
• CiscoSecure Global Roaming Server (GRS) for UNIX
• The Cisco DialOut Utility
116
LocalDirector
Integrated hardware and software solution for load balancing
across servers
• Allows many servers to appear as one
• Secure real-time embedded operating system
• Scalable to meet needs of largest Web sites
118
Cisco
DistributedDirector
Global Internet service scaling solution
• Enables set of distributed servers to be seen as a single virtual
server
• Configurable as authoritative Domain Name Services (DNS)
caching name server and/or HTTP Session Redirector on a
per-domain basis
120
Cache Engine
An Internet solution that consists of the Web Cache Control
Protocol (a standard feature of Cisco IOS software) and one or
more Cisco Cache Engines
• Stores and retrieves Web content locally
• Provides robust, high-performance, shared network caching
122
IP/TV®
Affordable network video system
124
• High-quality video broadcasting and video-on-demand services
• Industry-leading management capabilities
• Built-in scalability
• Network-friendly technologies such as IP multicast
• An easy-to-use viewer interface
Cisco 6510 Service
Solution Gateway
Offers the customer a selection of services
• Easy service selection via an HTML dashboard menu
• Up to 25,000 users can be logged into the Cisco 6510
Cisco Security and Internet Products at a Glance
Cisco Security and Internet Products at a Glance
126
107
Cisco PIX Firewall
Cisco PIX Firewall
Cisco PIX Firewall is the dedicated
firewall appliance in Cisco’s firewall
family. PIX Firewall delivers strong
security without impacting network
performance. The product line scales to
meet a range of customer requirements. PIX Firewall is the leading product in
its segment of the firewall market. The PIX Firewall provides full firewall
protection that completely conceals the architecture of an internal network from
the outside world. Virtual private network (VPN) connections using the IP
Security Protocol (IPSec) standards can be made with PIX Firewall. PIX Firewall
enforces secure access between an internal network and an intranet, extranet
links, and the Internet.
When to Sell
Sell This Product
PIX Firewall
• Strong security for corporate networks
• High-performance, enterprise-class firewall
• Fail-over/hot standby for network reliability; mission-critical
applications
• Support for sophisticated use of multimedia over the Internet
Key Features
• Resides between the corporate network and the Internet access router, and
includes Ethernet, Fast Ethernet, or Token Ring LAN connectivity options
• Protection scheme is based on the adaptive security algorithm (ASA) to
ensure the utmost in security
• Patent-pending “cut-through proxy” for authentication and authorization
• Support for 128 simultaneous outbound connections scalable to more than
65,000 as a business grows
• Unrestricted inbound connections to support large-scale Internet commerce
sites
• Graphical user interface for configuration and management
• Alert and alarm notification via e-mail and pager
• VPN support with private link encryption card
108
Cisco PIX Firewall
Specifications
Feature
PIX Firewall
Supported Interfaces
4-ports Ethernet, 3 Token Ring, or combinations of Ethernet and Token Ring
1 console interface port (DB-9 RS-232)
233 MHz (Pentium)
Simultaneous Sessions
128; 1024; 65,535
RAM
32 MB
Dimensions (HxWxD)
5.21 x 16.82 x 17.5 in.
Service Category
12
• Checkpoint: Firewall
• Raptor: Eagle
• Secure Computing Corporation: Sidewinder and Borderware
Cisco PIX Firewall Chassis Bundles1
PIX-520-128-CH
PIX-520-1K-CH
PIX-520-UR-CH
Entry Level 233 MHz PIX Firewall 520, two 10/100 Enet NICs
Midrange 233 MHz PIX Firewall 520, two 10/100 Enet NICs
Unrestricted 233 MHz PIX Firewall 520, two 10/100 Enet NICs
Cisco PIX Spare Modules
PIX-1FE=
PIX-1TR=
PIX-PL2=
One 10/100 Mbps Ethernet Interfaces, RJ45
One 4/16 Mbps Token-Ring Interface
PIX Private Link 2 Card, Spare
Cisco PIX Software Upgrades
PIX-CONN-128-1K=
PIX-CONN-128-UR=
PIX-CONN-1K-UR=
PIX License Upgrade from 128 to 1024 connectionc
PIX License Upgrade from 128 to 65,536 or more connectionc
PIX License Upgrade from 1024 to 16,536 or more connectionc
Cisco PIX Basic Maintenance
CON-SNT-PKG12
Cisco PIX Firewall SMARTnet Maintenance
See the PIX Firewall Web site: http://www.cisco.com/go/pix
109
Cisco IOS Firewall Feature Set
The Cisco IOS Firewall Feature Set is a value-added option of the Cisco IOS
software that builds advanced firewall-specific capabilities on top of existing
Cisco IOS security capabilities, such as authentication, encryption, and fail-over.
The Firewall feature set is ideal for corporate environments that wish to easily
and cost effectively secure their branch offices. It is also effective for businesses
that want to add intranet and extranet firewall capabilities to their existing
router-based network infrastructure. The Firewall feature set supports Virtual
Private Network connections using the IPSec standard.
When to Sell
Sell This Product
Cisco IOS Firewall
Feature Set
• Secure Internet connectivity for branch and remote offices
• Cisco IOS-based software environments
• Routing capabilities included in firewall, for example in an Intranet
configuration
• Rich application support, including multimedia
• Cisco IOS VPN-based solution requested
Key Features
• Context-based access control (CBAC) provides secure, stateful,
application-based filtering, supporting the latest protocols and advanced
applications
• Denial of service detection and prevention defends the network against
intrusion, such as syn flooding, port scans, and packet injection attacks
• Java blocking controls downloading of potentially malicious applets
• Real-time alerts notification via e-mail and pager
• Graphical configuration and management via ConfigMaker Security
Wizard
• Reporting tools available from third-party vendors
• Virtual private network (VPN) support via Cisco IOS IPSec and tunneling
features
110
Specifications
Feature
Supported Network
Interfaces
All network interfaces on supported platforms
Supported Platforms
Cisco 1600, 2500, 2600 and 3600 series router platforms
Memory
Varies by platform and image
No maximum, dependent on platform and network connection and traffic
• Ascend: SecureAccess Firewall
• Nortel: BaySecure Firewall-1
• Nokia: IP400 Series
Cisco IOS Firewall Feature Set for 1600 Series Routers1
CD16-CH-11.3=
CD16-BHP-11.3=
CD16-QHY-11.3=
CD16-QHL-11.3=
IP/IPX/Firewall Plus Feature Pack
IP/IPX/AT/IBM/Firewall Plus 56 Feature Pack
IP/IPX/AT/IBM/Firewall Plus IPSec 56 Feature Pack
Cisco IOS Firewall Feature Set for 2500 Series Routers
CD25-CH-11.3=
CD25-BHP-11.3=
CD25-AHY-11.3=
CD25-AHL-11.3=
Enterprise/Firewall Plus 56 Feature Pack
Enterprise/Firewall Plus IPSec 56 Feature Pack
Cisco IOS Firewall Feature Set for 2600 Series Routers
CD26-CH-12.0=
CD26-CHL-12.0=
CD26-BHP-12.0=
CD26-AHL-12.0=
Cisco 2600 Series IOS IP/Firewall Feature Pack
Cisco 2600 Series IOS IP/Firewall Plus IPSec 56 Feature Pack
Cisco 2600 Series IOS IP/IPX/AT/DEC/Firewall Plus Feature Pack
Cisco 2600 Series IOS Enterprise/Firewall Plus IPSec 56 Feature Pack
See the Cisco IOS Firewall Feature Set site: http://www.cisco.com/go/iosfirewall
111
Cisco NetSonar
Cisco NetSonar
NetSonar detects and reports vulnerabilities in host servers and network
devices, enabling an enterprise to prepare and maintain a secure network
environment for Internet connectivity and commerce.
NetSonar provides a comprehensive analysis of network security vulnerabilities,
performs detailed mapping of the network, and compiles an electronic inventory
of the networked system. NetSonar leverages its data management capabilities
through its unique display technology. By quickly generating customized reports
and graphs, it enables users to easily evaluate and communicate the
vulnerability posture of a network in various formats and levels of details,
depending on their audience.
When to Sell
Sell This Product
Cisco NetSonar
• The ability to measure and reduce their security exposure
• Improved network security
• A scalable solution that will grow with their infrastructure
• A vulnerability assessment tool
Key Features
• Flexible data analysis and reporting capabilities, including
graphics-generating features and report wizard
• Flexible licensing allows the user to use the product for various IP address
ranges
• Comprehensive scanning engine that can analyze and identify specific
networked systems—including Web servers, firewalls, routers, switches,
and workstations
• User-defined implementation options, including scheduling, specialized
profiles, and customized scanning rules for legacy or proprietary systems
• Unique matrix browser and display technology that allows users to easily
navigate through the data
• Extensive network security database with descriptions of security problems
and options to improve or fix them
112
Cisco NetSonar
Specifications
Feature
Cisco NetSonar
Processor
166 MHz Pentium required
Memory
32 MB RAM required
Hard Disk
2 GB recommended
Supported Addresses
250-5000
Service Category
7 (NetSonar Scanner - Limited To One Specific Class C Range)
11 (NetSonar Scanner - Up To 250 Addresses)
12 (NetSonar Scanner - Up To 500 Addresses)
15 (NetSonar Scanner - Up To 1,000 Addresses)
• ISS: Internet Scanner
• Axent: NetRecon
• NAI: CyberCop Scanner
Cisco NetSonar1
NETSONAR-S2001
NETSONAR-S2002
NETSONAR-S2003
NETSONAR-S2004
NETSONAR-S2005
NETSONAR-S2006
NetSonar Scanner - Limited To One Specific Class C Range
NetSonar Scanner - Up To 250 Addresses
NetSonar Scanner - Up To 500 Addresses
NetSonar Scanner - Up To 1,000 Addresses
Cisco NetSonar SMARTnet Maintenance
CON-SNT-PKG7
CON-SNT-PKG11
CON-SNT-PKG12
CON-SNT-PKG15
CON-SNT-PKG16
CON-SNT-PKG18
NetSonar Scanner - Limited To One Specific Class C Range SMARTnet Maintenance
NetSonar Scanner - Up To 250 Addresses SMARTnet Maintenance
NetSonar Scanner - Up To 500 Addresses SMARTnet Maintenance
NetSonar Scanner - Up To 1,000 Addresses SMARTnet Maintenance
See the NetSonar Web site: http://www.cisco.com/go/netsonar
113
Cisco NetRanger
Cisco NetRanger1
NetRanger is an enterprise-scale, real-time, intrusion detection system designed
to detect, report, and terminate unauthorized activity throughout a network.
NetRanger can operate in both Internet and intranet environments to protect an
organization’s entire network. NetRanger consists of two components:
NetRanger Sensor and NetRanger Director. Transparent to network
performance, NetRanger Sensors analyze the content and context of individual
packets to determine if the traffic is unauthorized. If a network’s data stream
experiences unauthorized activity, such as a SATAN attack, a ping sweep, or a
secret research project code word, NetRanger Sensors detect the policy violation
in real time, forward alarms to a NetRanger Director management console, and
remove the offender from the network.
When to Sell
Sell This Product
Cisco NetRanger
• A real-time intrusion detection system capable of monitoring an entire
enterprise network
• A robust, 24 hour x 7 day-a-week monitoring and response system with
the latest attack detection capabilities
• A distributed intrusion detection system capable of directing and
forwarding alarms between local, regional, and headquarters-based
monitoring consoles
• A high-speed intrusion detection system capable of handling Fast
Ethernet and FDDI speeds
• An intrusion detection system designed to integrate smoothly with
existing network management tools and practices
Key Features
• Real-time intrusion detection transparent to legitimate traffic/network
usage
• Real-time response to unauthorized activity blocks offenders from
accessing the network or terminates offending sessions
• Comprehensive attack signature list detects a wide range of attacks and can
detect content and context-based attacks
• Support for a range of speeds and interface types, including 10/100-Mbps
Ethernet, Token Ring, and FDDI
• Alarms include attacker and destination IP addresses, destination port,
attack description, and 256 characters of keystroke session capture before
attack
• Scalability for even extremely large, distributed networks
114
Cisco NetRanger
Specifications
Feature
Cisco NetRanger
Monitoring Network
Interface Cards
Ethernet
Token Ring
Fast Ethernet
Single Attached FDDI
Dual Attached FDDI
Control Network Interface Card
10/100BaseT Ethernet
Processor
Single or Dual 400MHz Intel Pentium
Memory
128 MB
Hard Drive
4.55 GB Ultra Wide SCSI
Floppy Drive
1.44 MB
CD-ROM Drive
12X SCSI CD ROM
• Internet Security Systems (ISS): Real Secure
See the NetRanger Web site: http://www.cisco.com/go/netranger
115
CiscoSecure Software Product Line
CiscoSecure Software Product Line1
The CiscoSecure software product line supports
Cisco’s dial access solutions with dial-in access
control, Internet services provisioning, and
outbound dial and fax.
CiscoSecure ACS for UNIX provides access control
services for large- and medium-sized access
environments. CiscoSecure ACS for Windows NT
delivers easy-to-use access control services for
Windows NT environments. CiscoSecure Global Roaming Server (GRS) for
UNIX enables service providers and corporate customers to take local Internet
connectivity to a global scale. The Cisco DialOut Utility allows desktop LAN
users to share NAS ports as a modem pool for outbound async communications.
When to Sell
Sell This Product
Cisco Secure ACS for
UNIX
• Securing dialup access in enterprise and SP environments, including
support for dial VPN services using Remote Access Dial-In User Service
(RADIUS), or access control for Cisco network elements using TACACS+
• Operation in the Solaris environment
• Use of external relational databases such as Oracle and Sybase
CiscoSecure ACS for
Windows NT
• Securing dialup access in enterprise environments, including support
for dial VPN services using RADIUS, or access control for Cisco network
elements using TACACS+
• Operation in the Microsoft Windows NT environment
• Authentication against the NT database
CiscoSecure GRS for
UNIX
• Create and manage global roaming networks for mobile, dial virtual
private network (dial VPN) and Internet users
• Provide new Internet access points for regional service providers (RSP)
using existing authentication, authorization, and accounting (AAA)
infrastructure and databases without requiring the RSPs to invest in
new infrastructure for points of presence (POPs)
• Partner with other ISPs to provide Internet and VPN services to users in
such a way that users always access their network via a local call
Cisco DialOut Utility
• Customer needs to replace desktop modems with centrally
administered outbound dial pool
• Customer uses Windows PCs and Cisco NASs
• Ensure compatibility with existing asynchronous dial client applications
• Registered CCO users can download the Cisco DialOut Utility from
www.cisco.com/kobayashi/sw-center/access/dialout-planner.shtml
Key Features
• All CiscoSecure products are tightly integrated with Cisco IOS features
• Standards-based approach to solution development, with implementations
of TACACS+, RADIUS and RFC 2217 reverse telnet dial-out ensures
compatibility in multivendor network environments
• Web-based graphical user interface for server-based products allows multiple
user access from common Web browser clients on different host platforms
1. For ordering information on these products, contact your Cisco Account Team.
116
Feature
Global Roaming
Server for UNIX
ACS for Windows
ACS for UNIX V2.2 NT 2.1
Platform
Sun SPARCstation 20
Sun SPARCstation 20
80486 or higher processor
IBM PC or compatible
running Windows NT
Server 4.0
Pentium 133-MHz
processor or faster
Screen resolution of 800 x
600 or faster
RAM
128 MB
256 MB
48-MB RAM required
64-MB recommended
Approximately 20K
Disk Drive
128 MB of disk swap
space
500 MB of disk space
128 MB of disk swap
space
CD-ROM drive
Approximately 1.5 MB of
hard disk space
DialOut Utility
Operating System –
Software
Requirements Solaris V.2.6
Solaris V2.6 or V2.5.1 (with Internet Explorer V3.02 or
required patches)
V4.0 or Netscape
Navigator V3.01,
Communicator V4.03
CiscoSecure GRS V.1.1
Platform
Requirements interoperates with Cisco
Release 11.1 or higher on Cisco IOS software 11.1 or The NAS must be running
the network device (11.2 later on the NAS
the 11.3(1) release of Cisco
for RADIUS)
IOS software or higher.
Mica modems are due to
be supported in December
1998
IOS software release
11.2.x or greater
Windows 95 0r Windows
NT 4.0
If you are using Cisco
DialOut Utility for dialup,
you need communications
software.
If you are using Cisco
DialOut Utility for faxing,
your fax software must
support Class 2 faxing.
Global Roaming Server
for UNIX
ACS for UNIX V2.2
Merit: AAA Server
Ascend: Access Control
Bay: Secure Access UNIX
Funk Software: Steel-Belted Radius
Lucent/Livingston: RADIUS
Merit: AAA Server
ACS for NT 2.1
Ascend: Access Control
Bay: Secure Access UNIX
Funk Software: Steel Belted Radius
Shiva: Access Manager
Livingston: Radius NT Service
Cisco Secure1
CSNT-2.1
CSNT-2.1-UG
CSNT-2.2
CSNT-2.2-UG
CiscoSecure ACS V.2.1 for Windows NT
CiscoSecure ACS V.1.0/V.2.0 for Windows NT to V.2.1 upgrade
CiscoSecure ACS V.2.2 for UNIX - Solaris
CiscoSecure ACS V.1.0/V.2.x for UNIX to V.2.2 upgrade
Cisco NetSonar SMARTnet Maintenance
CON-SNT-PKG7
CiscoSecure SMARTnet Maintenance
See the CiscoSecure Web site: http://www.cisco.com/go/ciscosecure
117
CiscoSecure Software Product Line
Specifications
Cisco LocalDirector
Cisco LocalDirector
Cisco LocalDirector is a
high-availability Internet
appliance for mission-critical
TCP/IP applications such as
database applications, intranet,
and TN3270 services. It is an
integrated solution with a secure real-time embedded operating system that
intelligently load balances TCP/IP traffic across multiple servers. Appearing as a
single virtual server, it delivers optimized performance by distributing client
requests across a cluster of low-cost servers. As a result, it dramatically reduces
the cost of providing large-scale Internet services.
LocalDirector is a high-availability system that ensures maximum client access.
Servers can be automatically and transparently placed in or out of service,
providing fault tolerance. LocalDirector itself is equipped with a hot standby
fail-over mechanism, eliminating all points of failure for the server system.
Virtual and real servers can back up one another.
When to Sell
Sell This Product
LocalDirector
• Load-balancing TCP/IP servers
• Web-based distribution of high-traffic Web sites
• High availability for mission-critical applications
• TN3270 sessions in an IBM environment
Key Features
• Hot standby fail-over enables configuration of highly redundant,
fault-tolerant systems
• Scalable to meet the needs of largest Web sites
• Simple setup, with little disruption to existing network configuration
• Configurable to a total of 8000 virtual and real servers, offers flexibility in
domain names and network configuration
• Transparent support for all common TCP/IP Internet services such as Web
File Transfer Protocol (FTP), Telnet, Gopher, and Simple Mail Transfer
Protocol (SMTP)
• Easy server configuration by adding and removing servers transparently as
traffic grows
• Compatible with any server operating system to retain IS investment
• Supports secure socket layer (SSL), which allows secure Internet commerce
118
Cisco LocalDirector
Specifications
Feature
LocalDirector 410
LocalDirector 420
4-port 10/100 Eth
1-port FDDI
4-port 10/100 Eth
1-port FDDI
166 MHz (Pentium)
300 MHz (Pentium II)
RAM
32 MB
128 MB
Throughput
45 MB
90 MB
Dimensions (HxWXD)
5.21 x 16.82 x 17.5 in
5.21 x 16.82 x 17.5 in
Service Category
10
15
• Alteon Networks: ACEdirector
• F5 Labs: Big IP
• IBM: Network Dispatcher
• RND Networks: Web Server Director
LocalDirector1
LDIR-410
LDIR-420
LD-4FE=
LD-FDDI=
LD-FO=
Standard LocalDirector - 45 MBps Throughput
High Performance LocalDirector - 90 MBps Throughput
4-Port High-Speed Ethernet Card Spare
FDDI Card for LocalDirector
Local Director Fail Over Cable
LocalDirector Basic Maintenance
CON-SNT-PKG10
CON-SNT-PKG15
SMARTnet Maintenance for LocalDirector 410
SMARTnet Maintenance for LocalDirector 420
See the LocalDirector Web site: http://www.cisco.com/go/localdir
119
Cisco DistributedDirector
Cisco DistributedDirector1
DistributedDirector provides dynamic, transparent, and scalable Internet traffic
load distribution between multiple geographically dispersed servers.
DistributedDirector is the only global Internet service scaling solution that
utilizes Cisco Internetwork Operating System (Cisco IOS) software and
leverages routing table information in the network infrastructure to make
“network intelligent” load distribution decisions.
DistributedDirector uses routing table intelligence in the network infrastructure
to transparently redirect end-user service requests to the closest responsive
server, resulting in increased access performance and reduced transmission
costs. Users need only a single subdomain name or Universal Resource Locator
(URL)-embedded hostname for accessing a distributed set of servers, thus
providing the appearance of a single virtual server. This feature eliminates the
need for end users to choose a server from a list of possible sites.
When to Sell
Sell This Product
Cisco Distributed
Director
• Load distribution across geographically/topologically dispersed TCP/IP
servers
• High availability for dispersed mission-critical applications
• Data center redundancy and failover
• TN3270 sessions in an IBM environment
Key Features
• Transparent distribution of all IP Services (TCP and UDP), including HTTP,
FTP, Telnet, and Gopher. Provides global scalability for all IP-based
network services
• Leverages Routing Table Information (BGP and IGP) in the Network
Infrastructure to make “network intelligent” network service load
distribution decisions, and improves access performance by redirecting
clients to the topologically closest server
• Calculates client-to-server round-trip times in real time, redirects clients to
server with lowest client-to-server link latency, maximizing end-to-end
server access performance
• Redirects clients only to responsive servers, resulting in maximized service
availability
• Utilizes Cisco IOS software: uses standard Cisco IOS command line
interface (CLI) for device configuration
• Allows servers to be added and removed transparently, simplifying
maintenance of distributed servers
• Supports multiple domains; cost-effective IP service scalability solution
120
Feature
DistributedDirector 2501/2502
DistributedDirector 4700M
D2501—1 port Ethernet
DD2502—1 port Token Ring
DDD4700ME—1 Ethernet
DD4700MFE—1 Fast Ethernet
DD4700MTR—1 Token Ring
DD4700MFDM—1 dual-attached multimode FDDI
Processor (type)
20-MHz (68030 processor)
133-MHz (IDT Orion RISC processor)
Flash Memory
8 MB
16 MB
DRAM
8 MB
32 MB
Dimensions (HxWxD) 1.75 x 17.5 x 10.56 in
3.4 x 17.6 in x 17.7 in
• F5 Labs: 3DNS
• IBM: Network Dispatcher
• RND Networks, Inc.: Web Server Director - Network Proximity (WSD-NP)
• Resonate, Inc.: Global Dispatch
See the DistributedDirector web site at http://www.cisco.com/go/dd
121
Cisco DistributedDirector
Specifications
Cisco Cache Engine
Cisco Cache Engine
The Cisco Cache Engine is a
dedicated Internet appliance
designed to deliver
high-performance transparent
Web caching services. The
Cache Engine takes advantage
of the fact that most Web traffic in Internet and intranet environments is
redundant—multiple users at any given site request much of the same content.
When a user first requests particular Web content, the Cache Engine intercepts
the request, fetches the Web page from the remote server, and sends the content
to the user while simultaneously storing the content locally. Subsequent requests
by that client or any other downstream client are serviced by the Cache Engine.
This, in turn, significantly reduces bandwidth consumption on upstream links
and improves client-side response time.
When to Sell
Sell This Product
Cisco Cache Engine
• A scalable transparent solution for reducing WAN bandwidth
consumption associated with Web traffic
• A high-performance tool for improving client response time—ideal for
Cable and digital subscriber line (DSL) environments
• An easy-to-use, fault-tolerant, caching solution
Key Features
• Transparent to Web browsers
• Scalable on a system-wide basis
• Fault tolerant and fail-safe
• Simple to deploy and manage
• Extensive logging and reporting
122
Cisco Cache Engine
Specifications
Feature
Cisco Cache Engine
10/100 Full-Duplex Ethernet
233 MHz (Pentium II)
RAM
128 MB
Hard Drive
24 GB
Dimensions (HxWXD)
5.21 x 16.82 x 17.5 in.
Service Category
13
• CacheFlow: C100/C1000
• Inktomi: Traffic Server
• Microsoft: Proxy Server
• Network Appliance: C230/C630
Channel Part Number and Ordering Information
Cisco Cache Engine1
CE2050
CON-SNT-PKG13
Cisco Cache Engine CE2050
Cisco Cache Engine SMARTnet Maintenance
See the Cache Engine Web site: http://www.cisco.com/go/cache
123
Cisco IP/TV
Cisco IP/TV
Cisco IP/TV uses emerging
Internet standards to reliably
and efficiently transmit audio
and video content over
existing IP networks. IP/TV
represents a significant new
opportunity for leveraging
the multimedia capabilities of
Cisco IOS networks. Using
IP/TV, an organization can
use its intranet for more
effective employee communications, distance learning, and any number of other
applications for audio and full-motion video distribution.
When to Sell
Sell This Product
Cisco IP/TV
• Client/server application that multicasts live or prerecorded digital
video and audio streams to an unlimited number of users over an
IP-based LAN or WAN
• Corporate communications: meetings, conferences, management,
presentations, business TV
• Training: product, employee, distance learning
• Monitoring applications such as process and surveillance or patient
monitoring
Key Features
• Internet standards-based (IP multicast, Real-Time Transparent Protocol
[RTP], RTP Control Protocol [RTCP])
• Coder-decoder (CODEC) independent—supports all video for Windows
CODECs
• Bandwidth scalable from 28.8 Kbps for audio to 1.5 Mbps for high-quality
audio and video
124
Cisco IP/TV
Specifications
Feature
Cisco IP/TV
Supported Platforms
IP/TV Viewer: Windows 95, Windows NT, browser plugin
IP/TV Server: Windows 95, Windows NT
IP/TV Program Guide: Windows NT with Microsoft IIS or Netscape servers
Processor
133-MHz or higher Pentium required
Memory
32-MB RAM required for Windows NT
Hard Disk
12-MB free space required
Bandwidth
Scalable from 28.8 kbps for audio to 1.5 Mbps for high-quality audio and video
50–2500
Service Category
12 (IP/TV Starter Kit w/20 Viewer License)
12 (IP/TV Starter Kit w/ MPEG Combo Encoder Hardware)
11(IP/TV Starter Kit w/ MPEG Composite Encoder Hardware)
9 (IP/TV Server Only for Windows)
4 (IP/TV StreamWatch)
7 (IP/TV Viewer for Windows, 25 License Bundle)
10 (IP/TV 50 Viewers)
• Microsoft: Netshow 3.0
• Real Network: RealSystem 5.0
Cisco IP/TV1
IPTV-SERV-WIN-1
CON-SNT-PKG9
IP/TV Server Only for Windows
IP/TV Server Only for Windows SMARTnet Maintenance
See the Cisco IP/TV Web site: http://www.cisco.com/go/iptv
125
Cisco 6510 Service Selection Gateway
Cisco 6510 Service Selection
Gateway1
The Cisco 6510 Service Selection
Gateway (SSG) is a key element in
breaking through the services
profitability barrier by offering the
customer a selection of services. For service providers worldwide that need to go
beyond fixed-rate services and statically provisioned networks, the Cisco 6510
SSG advertises services that the customer can effortlessly select by accessing an
HTML dashboard server. The dashboard Web server accompanies the
Cisco 6510 SSG and allows service providers a means to advertise available
services to customers so that they can instantly know what services are available
and easily select a service.
When to Sell
Sell This Product
Cisco 6510
• Single-user access to multiple destinations simultaneously
• Multiple users at a single customer premises equipment (CPE) access
to multiple destinations simultaneously
• A way to advertise and offer additional on-demand services through an
HTML dashboard menu
Key Features
• Easy service selection via an HTML dashboard menu
• Up to 25,000 users can be logged into the Cisco 6510 simultaneously
• Supports warm standby fail-over
• Accounting for each individual service, allowing service providers lots of
flexibility in billing
• Physical media independence supports dial, asymmetric digital subscriber
line (ADSL), and cable
See the Cisco 6510 Service Selection Gateway site:
http://www.cisco.com/go/6510
126
ATM Products
The Cisco LightStream 1010 offers the
sophistication and depth of functionality
required for true advanced traffic
management (ATM) production. ATM
mechanisms support current, bursty,
best-effort traffic, while also delivering the
QoS guarantees required for applications of
the future. Available bit rate (ABR) congestion control support allows the
LightStream 1010 to slow traffic sources before congestion becomes excessive,
whereas support for the ATM Forum PNNI protocols allows networks of
LightStream 1010s to scale to hundreds of nodes while still delivering
interoperable, QoS-based routing. Value-added capabilities allow for ATM
access lists and load sharing across redundant links. All this sophistication is
hidden, however, by the true standards-based, plug-and-play capabilities of the
LightStream 1010, and advanced management functions allow for
unprecedented levels of network visibility and control.
Key Features
• Switch architecture—Fully nonblocking shared-memory switch fabric; field
upgradable feature card that implements all advanced switch and traffic
management functions
• Network management—CWSI 2.1, CiscoView for the Lightstream 1010
• High-speed switching architecture—Allows up to 32 OC-3 connections
Specifications
Feature
LightStream 1010
Fixed Ports
None
Modular Slots
5
OC-3 / OC-12 ATM single mode/multimode
STM-1 / STM-4 ATM single mode/multimode
DS3 4-port/2-port
E3 4-port/2-port
T1/E1 ATM trunk and T1/E1 circuit emulation
ATM 25 Mbps
DRAM
16 MB (default)
Capacity
5 Gbps, 65,536 cells of buffering
Dimensions (HxWxD)
10.5 x 17.2 x 18.1 in.
Connections
Switch to switch: IISP, PNNI
User: UNI 3.0/3.1/4.0 SVCs and PVCs, point-to-point and point-to-multipoint, soft PVCs, SVC
tunneling over PVPs
See the LightStream Web site: http://www.cisco.com/go/ls1010
127
Cisco LightStream 1010
Cisco LightStream 10101
Cisco BPX 8600 Series Wide-Area Switches
Cisco BPX 8600 Series Wide-Area
Switches1
The Cisco BPX® 8600 series switches are
powerful broadband wide-area switches
with advanced IP and ATM capabilities.
Designed to meet the demanding,
high-traffic needs of a public service
provider or large private enterprise, the
BPX switch delivers high-performance
ATM switching, multiservice adaptation,
and aggregation for all types of user traffic.
Key Features
• Support for integrated IP and ATM services
• Up to 450,000 cells buffering per interface card—allocated per virtual
path/virtual connection (VP/VC)
• Up to 16 programmable queues for class-based queues
• Queues programmable by maximum queue depth, minimum and
maximum service bandwidths, cell loss priority thresholds, explicit forward
congestion indicator (EFCI) thresholds, delay tolerance, and so on
• ABR virtual source/virtual destination (VS/VD) traffic management per
ATM Forum Specification V.4.0
• Virtual trunking
• All components are optionally redundant to 100 percent system redundancy
• Network management:
– In-band and out-of-band network management supported
– SNMP and MIB support for configuration and monitoring
– Trivial File Transport Protocol (TFTP) support for bulk statistics
collection
– Interfacing to network management is provided through one 802.3
attachment unit interface (AUI) interface for local connection to
StrataView Plus® and two asynchronous control/printer ports
• Automatically reroutes connection in the event of a link failure
• Per-virtual connection control capabilities manage queuing, rate
scheduling, statistics collection, and fair allocation of bandwidth
• Advanced class-of-service (CoS) management—Enables managers to tailor
individual connections to meet service level guarantees for ATM and Frame
Relay traffic
128
Feature
Cisco BPX 8600 Series Wide-Area Switch
Fixed Ports
None
Modular Slots
15 slots (2 slots reserved for redundant control and switch modules, 1 slot reserved for alarm
status monitor module, 12 slots for general-purpose interface modules)
T3 with PLCP per TA-TY-000773 and direct mapping per ITU-T G.804
E3 per ITU-T Rec. G.804
OC-3c (155 – 520 Mbps) with SONET framing per Bellcore GR-253, ANSI T1.105
STM-1 (155.520 Mbps) with SDH framing per ITU-T Rec. G.707-G.709
OC-12c (622.08 Mbps) SONET per Bellcore GR-253, ANSI T1.105
STM-4 (622.08 Mbps) with SDH framing per ITU-T Rec. G.707-G.709
Maximum Configuration
24 OC-12/STM-4 ports; 96 0C-3c/STM-1 ports; 144 T3/E3 ports 1280 T1/E1 ports
30,000 ports (at 64 kbps, DS-0)
Scalable multishelf architecture
Crosspoint Switch Fabric
20-Gbps switch capacity
12 800/1600-Mbps switch ports that can support up to OC-12c/STM-4 cell rate
PVC Server Classes
Constant bit rate (CBR)
Real time variable bit rate (RT-VBR)
Non-real time variable bit rate (NRT-VBR)
Unspecified bit rate (UBR)
Available bit rate (ABR)
Broadband Service
Interfaces
Conformance to ATM Forum Specification V.3.1:
T3/DS3 UNI (44.736 Mbps)
E3 UNI (34.368 Mbps)
OC-3c UNI (155.520 Mbps) SONET
STM-1 UNI (155.520 Mbps) SDH
OC-12c UNI (622 Mbps) SONET
STM-4 UNI (622 Mbps) SDH
Dimensions (HxWxD)
22.75 x 17.72 x 27 in.
See the Cisco BPX 8600 web site: http://www.cisco.com/go/bpx8600
129
Cisco BPX 8600 Series Wide-Area Switches
Specifications
Cisco MGX 8220 Edge Concentrator
Cisco MGX 8220 Edge
Concentrator1
The MGX™ 8220 edge concentrator
adapts a variety of services to a standard
ATM User-Network Interface (UNI) or
Network-to-Network Interface (NNI)
port. The MGX 8220 edge concentrator
can be used as an integrated or remote
adjunct shelf for Cisco’s ATM switch product lines or as a standalone unit that
aggregates traffic to and from an ATM network.
The MGX 8220 adapts incoming data to 53-byte ATM cells using
industry-standard ATM adaptation layers (AALs) for transport over the ATM
network.
Key Features
• Redundancy:
– 1:1 optional common equipment redundancy
– Up to 9:1 optional subscriber interface redundancy
• Network management:
– SNMP and MIB support for configuration and monitoring
– TFTP support for bulk statistics collection
– CiscoView
– Carrier-class reliability
– Large buffers and a patented dynamic buffer management algorithm for
allocating buffers
– Closed-loop congestion management
130
Cisco MGX 8220 Edge Concentrator
Specifications
Feature
MGX 8220
Fixed Ports
None
Modular Slots
16 slots:
– 2 slots reserved for common control cards
– 2 slots reserved for service redundancy
– 2 slots reserved for broadband trunk modules
– 10 slots available for service interface modules
Subscriber Interfaces
Frame Relay (Frame Relay, FR-ATM NIW, FR-ATM SIW, ATM FUNI, Frame Forwarding)
T1/E1
Channelized T1/E1
HSSI
x.21
ATM
– T1/E1
– n x T1/E1 IMA
Circuit Emulation
– T1/E1 (UDT mode)
– Channelized T1/E1 (SDT mode)
SNA (SLDC, Bisync)
– Channelized T1 (DS0A)
Trunk Interfaces
T3/E3
CC-3C
IMA (n x T1/E1)
Connector Management
Permanent virtual circuits (PVCs) or switched virtual circuits (SVCs)
Switching
320-Mbps ATM cell bus
Dimensions (HxWxD)
8.75 x 17.45 x 21.25 in.
See the Cisco MGX 8220 web site: http://www.cisco.com/go/mgx8220
131
Cisco IGX 8400 Series
Cisco IGX 8400 Series1
Delivering “new-world” networking capabilities to
enterprises, the Cisco IGX 8400 series integrates
Cisco IOS software—the industry's leading IP
internetwork operating system—and leading-edge
ATM capabilities into a single platform. The Cisco
IGX 8450 wide-area switch is the newest member
of the Cisco IGX 8400 series of multiservice
switches that enable enterprise customers to
support existing WAN voice and data applications
as well as emerging, IP-based applications.
IP+ATM multiservice switching capabilities can be
integrated into a single Cisco IGX 8450 platform
or deployed as needed via a Service Expansion Shelf (SES) for new and existing
Cisco IGX 8410, IGX 8420, and IGX 8430 networks.
Key Features
• IP+ATM integration—Addresses the shift in network traffic mix towards
new IP-based applications by integrating Cisco IOS with leading-edge
ATM; enables IP QoS over an ATM infrastructure via Tag
Switching/Multiprotocol Label Switching (MPLS); integrates LAN and
WAN interfaces on a single platform
• Multiservice integration—supports all applications, reducing network
operation costs and increasing WAN bandwidth savings due to statistical
multiplexing; consolidates multiple WAN infrastructures; provides
flexibility for deploying voice over IP, ATM, or Frame Relay
• Bandwidth efficiency—maximizes efficiency of expensive WAN circuits for
data, voice and video traffic, thereby reducing recurring bandwidth costs
• Performance and QoS guarantees—delivers high performance and full
control over network resources with per-VC queuing, per-VC rate
scheduling, and multiple classes of service (COS) to guarantee QoS levels
for the individual applications; supports all applications, according to their
specific requirements, using advanced traffic management and CoS features
• Flexible, scalable network design—offers multiple form factors and
configurations for adapting to specific customer needs; integrates
seamlessly with existing IGX 8400, BPX 8600, and MGX 8800 networks
• End-to-End Integration—extends WAN backbone to branch offices,
providing the same high service levels regardless of location; provides
value-added interworking between existing Cisco routers and LAN
switches for seamless traffic flow between LAN/campus and WAN
environments; reduces operational efforts with integrated network
management systems
132
Feature
Cisco IGX 8410
Cisco IGX 8420
Cisco IGX 8430
Fixed Ports
None
None
None
Modular Slots
8-slot chassis (2 slots reserved for
redundant processor card)
16-slot chassis (2 slots reserved 32-slot chassis (2 slots reserved
for redundant processor card) for redundant processor card)
Maximum
Configuration
24 OC-3/STM-1
36 T3/E3
64 T1/E1 for ATM
64 T1/E1
72 V.35/X.21
24 HSSI for Frame Relay
6 T1/E1 for voice
24 V.35/EIA/TIA-449 for circuit data
Example:
2 OC-3/STM-1 ATM
6 T3/E3 ATM
8 T1/E1 ATM
8 T1/E1 Frame Relay
1 T1/E1 voice
12 V.35/X.21 Frame Relay
56 OC-3/STM-1
64 T3/E3,
64 T1/E1 for ATM
64 T1/E1
168 V.35/X.21
14 T1/E1 for voice
56 V.35/EIA/TIA-449 for circuit
data
Example:
2 OC-3/STM-1 ATM
6 T3/E3 ATM
16 T1/E1 ATM
16 T1/E1 Frame Relay
3 T1/E1 voice
8 V.35/EIA/TIA-449 circuit data
ATM Interface
Same as Cisco IGX 8410
2 ports/module, OC-3/STM-1
single-mode fabric
4 ports/module, OC-3/STM-1 multimode
fabric/single-mode fabric
3 or 6 ports/module, T3/E3
4 or 8 ports/module, T1/E1
Frame Relay
Interface
4- or 8-port T1/E1
12-port V.35, X.21
4-port HSSI
Port concentrator shelf
Frame Relay switched ISDN access
Voice Interfaces 1- or 2-port T1/E1/J1
64 OC-3/STM-1
64 T3/E3,
64 T1/E1 for ATM
64 T1/E1
360 V.35/X.21
30 T1/E1 for voice
120 V.35/EIA/TIA-449 for circuit
data
Example:
2 OC-3/STM-1 ATM
6 T3/E3 ATM
32 T1/E1 ATM
16 T1/E1 Frame Relay
8 T1/E1 voice
16 V.35/EIA/TIA-449 circuit data
Support for G.726, G728, G729, G729a
Voice Activity Detection and Echo
Cancellation on board
Voice Switching (QSIG, DPNSS,
Q.931A, 4ESS, DSS1, T1-CAS)
Circuit Data
4-or 8-port EIA/TIA-232
4-port V.35, EIA/TIA-449
Dimensions
(HxWxD)
24.4 x 19.9 x 27.1 in.
32 x 19.9 x 27.1 in.
55 x 19.9 x 27.1 in.
See the Cisco IGX 8400 web site: http://www.cisco.com/go/igx8400
133
Cisco IGX 8400 Series
Specifications
Cisco TGX 8750 Core Switch
Cisco TGX 8750 Core Switch1
The Cisco TGX 8750 core switch tightly integrates IP and ATM technologies
through Tag Switching, the first implementation of the emerging Multiprotocol
Label Switching (MPLS) standard.
Designed for service provider environments, the TGX 8750 switch features
hierarchical Private Network to Network Interface (PNNI), Synchronous
Optical Network/Synchronous Digital Hierarchy (SONET/SDH) automatic
protection switching and OC-48c optical internetworking support. Building
upon the PNNI protocol, the TGX 8750 core ATM network can be scaled to
many thousands of switching nodes that support Switched Virtual Circuits
(SVCs), soft PVCs, and point-to-multipoint VCs. All PNNI and Tag Switching
capabilities are now tightly integrated into Cisco IOS software.
Key Features
• Provides seamless integration for both IP and ATM technologies
• Delivers nonblocking forwarding through its use of a single-stage,
shared-memory architecture
• Supports up to one million cells of total buffering to protect against data
loss
Specifications
Feature
Cisco TGX 8750
Fixed Ports
None
Modular Slots
14
100 MHz (R5000 IDT)
Flash Memory
8 MB
DRAM
64 MB
Power Supply
AC/DC
Dimensions (HxWxD)
33.25 x 17.16 x 18.12 in.
See the Cisco TGX 8750 web site: http://www.cisco.com/go/tgx8750
134
The Cisco MGX 8800 series wide-area edge
switch offers the industry's widest breadth of
integrated IP+ATM services and unmatched
deployment flexibility. Now, service providers
can provision today's revenue-generating Frame
Relay, leased-line, legacy, and Internet services
while enabling deployment of integrated VPN,
managed intranet, electronic commerce, voice,
and video services. The MGX 8800 edge switch
provides the best of both worlds—IP and
ATM—in a single platform, to enable service providers to reduce capital and
operational costs by eliminating the need to build multiple overlay networks.
No matter what demands the market makes, the Cisco MGX 8800 delivers the
scalability and widest range of service interfaces to meet the demand.
Key Features
• All components are optionally redundant to 100-percent system
redundancy, including the control processor switching fabric, network
interfaces, service interfaces, backplane signals, power supplies, power
modules, and cooling fans
• Supports industry-standard, APS for all SONET and SDH interfaces
• Carrier-class reliability
• Large buffers and a patented dynamic buffer management algorithm for
allocating buffers
135
Cisco MGX 8800 Series Wide-Area Edge Switches
Cisco MGX 8800 Series Wide-Area
Edge Switches1
Cisco MGX 8800 Series Wide-Area Edge Switches
Specifications
Feature
Cisco MGX 8800
Fixed Ports
None
Modular Slots
32 single-height (16 double-height) function module slots
Single-height slots can be in-service converted to double-height slots by removal of
midrail dividers
2 double-height slots reserved for redundant processor switch modules
4 single-height (2 double-height) slots reserved for optional value-added service
resource modules
24 single-height (12 double-height) slots for service modules
Network Interfaces
OC-48c/STM-16
OC-12c/STM-4
OC-3c/STM-1
T3
E3
Channelized T3 (down to DS0)
n x T1/E1
T1/E1
Channelized T1 (DS0 and DS0A)
Channelized E1
HSSI, X.21
Ethernet
Fast Ethernet
Fiber Distributed Data Interface (FDDI)
Services
IP VPNs
Voice over ATM, Voice over IP, Voice over Frame Relay
Frame Relay
PPP access
SNA outsourcing
Cell relay
Frame Relay-to-ATM network interworking
Frame Relay-to-ATM service interworking
Circuit Emulation/private line replacement
Complete suite of Cisco IOS-based protocols and services
Dimensions (H x W x D)
29.75 x 17.72 x 21.5 in.
See the Cisco MGX 8800 web site: http://www.cisco.com/go/mgx8800
136
Network Management Products
Cisco is transforming traditional network management by focusing on the
strengths of Internet-based architectures for greater accessibility and
simplification of network management tools, tasks, and processes. Cisco’s
network management strategy, termed Assured Network Services, calls for a
migration from traditional legacy applications to a Web-based model with the
following characteristics:
• Standards based
• Simplification of tools, tasks, and processes
• Web-level integration with NMS platforms and general management
products
• Capable of providing end-to-end solutions for managing routers, switches,
and access servers
• Creation of a Management Intranet by integrating discovered device
knowledge with CCO and third-party application knowledge
Cisco Network Management Products
Current Cisco network management products are a mix of new Web-based
products and console-based applications.
CiscoWorks2000 is the new product family designed to carry forward the
functionality in CiscoWorks, Cisco Resource Manager, and CiscoWorks for
Switched Internetworks (CWSI). Together, the new management products
include enhanced tools, significant new functionality, and standards-based
third-party integration tools. Specifically, CiscoWorks2000 is comprised of:
• Resource Manager Essentials—Features tools for managing inventory,
availability, change, configuration, syslog, connectivity, image deployment,
and Cisco Management Connection for creating management intranets
• CWSI Campus—For managing switches and network traffic; features tools
for managing end user tracking, VLANs, ATMs, config, and topology, as
well as performing traffic analysis
• CiscoView—a graphical device management tool
• Future functional drop-in modules
Cisco network management tools also include other important standalone
applications such as NetSys and NetFlow Collector or hardware products such
as SwitchProbes and Network Analysis Modules.
137
Cisco Network Management Overview
Cisco Network Management Overview
Resource Manager Essentials
Cisco Resource Manager Essentials is a powerful suite of Web-based network
management solutions within the CiscoWorks2000 family for managing
routers, access servers, and switches. Essentials delivers significant productivity
improvements for network managers performing day-to-day administrative
tasks. Its browser interface allows easy access to information critical to network
uptime and simplifies time-consuming administrative tasks in small- to
large-scale enterprise networks. Essentials is composed of seven primary
applications: Configuration Manager, Change Audit Services, Inventory
Manager, Availability Manager, Syslog Analyzer, Software Image Manager, and
Cisco Management Connection. These applications combine to streamline the
tasks of managing network inventory and device changes, archiving and
searching configuration files, and rapidly deploying new software images.
Essentials also helps troubleshoot the basic connectivity status of critical
network devices and provides information needed for hardware capacity
planning.
When to Sell
Sell This Product
Resource Manager
Essentials
• Up-to-date information on Technical Assistance Center (TAC) status,
SMARTnet contract status, or upgrade planning data
• In networks of all sizes when inventory, device changes, or
configurations are difficult to track
• When a customer has to upgrade IOS software on multiple devices
• When a customer is integrating third-party Web applications to create
a management intranet
Key Features
• Manages routers, switches, access servers, and SNMP devices
• Anytime, anywhere access to Cisco management tools
• Automation and wizard-based management for simpler, error-free
reporting and software deployment
• Direct Cisco Connection Online (CCO) services and support
• Network change reports, troubleshooting tools, and critical-status
notification
• Cisco Management Connection allows custom “management intranet”
development to unify in-house applications and more than 20 partner
management applications
138
Feature
Platform Compatibility
No network management platform required; optional importing of data from HP OpenView,
CiscoWorks 4.0, CWSI 1.3, 2.1
Supported Cisco Products
Most Cisco routers using Cisco IOS 10.3 and later, including:
7xx, 10xx, 16xx, 2xxx, 3xxx, AS5xxx, 7xxx, 12xxx
Most switches, including:
Catalyst 12xx, 1600, 1700, 1800, 1900, 2200, 2600, 28xx, 2900, 3xxx, 5xxx
LightStream ATM, 8xxx
Workgroup concentrators
MicroHub 15xx
FastHub 1xx, 2xx, 3xx
Server Hardware
Requirements
System: Sun Ultra 1 or higher, HP9000 Series 700 or higher, IBM RS/6000 Series 390 or higher,
Wintel PC 300 MHz or higher
Memory: 256 MB minimum
Disk Drive: 4 GB recommended
Server Software
Requirements
Solaris 2.6 or Solaris 2.5.1 (with 103738-xx patch installed)
Microsoft Windows NT 4.0 server or NT 4.0 workstation with service pack 3
AIX 4.2.1 or 4.3
HP UNIX 10.2 or 11.0
Resource Manager can work in the same environment with the following products, but does
not require these products:
HP OpenView 4.1.1, 5.0, or 5.01
CiscoWorks 3.2 or 4.0
CWSI 2.1.1 or 2.2
SunNet Manager 2.2.3 and 2.3, Soltice 2.0
Tivoli NetView 4.1
Client Software
Requirements
Netscape 4.04 or 4.05 with Windows NT 4.0; Windows 95; Solaris 2.6 or 2.51; HP-UX 10.10, 10.20,
or 11.0, or AIX 4.2.1 or 4 4.3
Microsoft Internet Explorer 4.0.1 with Windows NT 4.0 or Windows 95
Java Javascript, Active-X enabled and active desktop disabled
• 3Com: Transcend
• Bay Networks: Optivity
• Cabletron: Spectrum Element Manager
Ordering Information and Channel Part Numbers
Resource Manager Essentials1
CWES-2.0-SOL
CWES-2.0-NT
CWES-2.0-SOL-UPG
CWES-2.0-NT-UPG
CWE+C-SOL-COMB1
CWE+C-NT-COMB1
ENM-2.0.NT
CWE+C-SOL-UPG1
CWE+C-NT-UPG1
Resource Manager Essentials Standalone for Solaris
Resource Manager Essentials Standalone for Windows NT
Resource Manager Essentials Standalone Upgrade for Solaris
Resource Manager Essentials Standalone Upgrade for Windows NT
Resource Manager Essentials bundled with CWSI Campus for Solaris
Resource Manager Essentials bundled with CWSI Campus for NT
Resource Manager Essentials, CWSI Campus, and Netsys Baseliner for NT
Upgrade from CWSI 2.X or CiscoWorks 4.X for Solaris
Upgrade from CWSI 2.X or CiscoWorks 4.X for NT
See the Resource Manager Essentials Web site: http://www.cisco.com/go/crm
139
Specifications
CWSI Campus
CWSI Campus
CWSI Campus is a comprehensive
management solution within the
CiscoWorks2000 family for managing
Cisco Catalyst and LightStream
switches. A suite of applications,
CWSI Campus offers extensive
network discovery and display,
configuration, RMON/RMON2
traffic, and LAN/WAN performance
management capabilities on a device and network-wide basis.
CWSI Campus enables network supervisors to manage enterprise switches as a
system, freeing them from time-consuming device-by-device configuration,
monitoring, and problem resolution tasks. Powerful discovery and topology
display tools provide a quick and intuitive view of the network’s physical and
logical link configuration integrity. Network performance can be easily assessed
through real-time analysis of traffic data using RMON/RMON2 data collection
from switches, Cisco’s line of SwitchProbe® devices, or Catalyst 5000 Network
Analysis Modules. VLAN and ATM configuration is simplified through intuitive
graphical tools that replace lengthy and time-consuming command-line setup
routines.
When to Sell
Sell This Product
CWSI Campus
• Support for Catalyst and LightStream switches
• VLAN, ATM, or LANE services management tools
• RMON traffic monitoring and analysis capability
• Ability to track users in the network
Key Features
• Easier management of ATM and LANE services
• Greater visibility into network traffic patterns
• Graphical display of the physical devices and links in your network
• CiscoView, a modular graphical device management applet, gives users a
consistent interface across every Cisco device
140
Feature
CWSI Campus
Catalyst switches
LightStream switches
Server Hardware
Requirements
System: Sun Ultra 1 or higher, HP9000 Series 700 or higher, IBM RS/6000 Series 390 or higher,
Wintel PC 300 MHz or higher
Memory: 256 MB minimum
Disk Drive: 4 GB recommended
Software Requirements
Solaris 2.6 or 2.5.1 (with 103738-xx patch installed)
Microsoft Windows NT 4.0 server or NT 4.0 workstation with service pack 3
AIX 4.2.1 or 4.3
HP UNIX 10.2 or 11.0
CWSI Campus can work in the same environment with the following products. CWSI Campus
is a standalone product and, with the exception of Resource Manager Essentials, does not
require these products:
HP OpenView 5.0, 5.01, or 5.03
CiscoWorks 3.2 or 4.0
SunNet Manager 2.2.3 and 2.3, Soltice 2.0
Tivoli NetView 4.4 or 5.0
Service Category
12
• 3Com: Transcend
• Bay Networks: Optivity
CWSI Campus1
CWE+C-SOL-COMB1
CWE+C-NT-COMB1
ENM-2.0.NT
CWE+C-SOL-UPG1
CWE+C-NT-UPG1
Resource Manager Essentials Bundled with CWSI Campus for Solaris
Resource Manager Essentials Bundled with CWSI Campus for Windows NT
Resource Manager Essentials, CWSI Campus, and Netsys Baseliner for Windows NT
Upgrade from CWSI 2.X or CiscoWorks 4.X for Solaris
Upgrade from CWSI 2.X or CiscoWorks 4.X for Windows NT
CWSI Campus Basic Maintenance
CON-SNT-PKG12
SMARTnet Maintenance for CWSI
See the CWSI Campus Web site: http://www.cisco.com/go/cwsi
141
CWSI Campus
Specifications
CiscoWorks Windows
CiscoWorks Windows
CiscoWorks Windows is
comprehensive network
management software that
provides a powerful set of tools
to easily manage your small to
medium business network or
workgroup. Information such as
dynamic status, statistics, and
comprehensive configuration
information is available for
Cisco routers, switches, hubs, and access servers.
Based on the SNMP industry standard, CiscoWorks Windows provides
complete management of Cisco solutions within diverse, heterogeneous
networks, using the powerful embedded features of the industry-leading
Cisco IOS software.
When to Sell
Sell This Product
CiscoWorks Windows
• Comprehensive network management and video monitoring solution
• Easy-to-use router and switch manager
• Cost-effective network management solution
Key Features
CiscoWorks Windows provides the following features when used in conjunction
with Castle Rock’s SNMPc or Hewlett-Packard’s OpenView for Windows:
• Automatic discovery process for networked devices that creates a network
topology map using a color-coded, hierarchical view of the network for IP
and IPX networks
• Access to extensive data on port status, bandwidth utilization, traffic
statistics, protocol information, and other network performance statistics
• Flexible graphing capabilities for quickly recording and analyzing
historical data that can be exported to files
• Management Information Base (MIB) compiler and browser for managing
third-party SNMP devices
• Tools to simplify device configuration and management for Cisco routers,
switches, hubs, and access servers
• Threshold management features that can be set for many performance
variables to generate an alarm or event notification
• Event filters that condense events into useful troubleshooting information
• Device configuration features for configuring simple virtual LANs (VLANs)
142
CiscoWorks Windows
CiscoWorks Windows Components
CiscoWorks Windows comprises of the following tools:
• Castle Rock SNMPc Network Management System—Provides network
discovery, mapping, monitoring, and alarm tracking for any SNMP, Cisco,
or third-party device
• CiscoView—Provides back- and front-panel displays; dynamic,
color-coded graphical displays simplify device-status monitoring,
device-specific component diagnostics, and application launching;
CiscoView contains the following applets:
– Threshold Manager—Enhances the ability to set thresholds on Cisco
RMON-enabled devices, reducing management overhead and improving
troubleshooting capabilities
– StackView/StackMaker—Simplifies device configuration, monitoring,
and management of Cisco’s extended network system
– Flash file system—Simplifies router configuration for the Cisco 7000,
7010, 7204, 7406, 7505, 7507, and 7513 routers
• Health Monitor—Provides real-time fault and performance monitoring of
device statistics, including device characteristics, CPU utilization, interface
activity, errors, and protocol information
• Configuration Builder—Allows users to create and distribute configuration
files for multiple Cisco devices through a graphical user interface
• Show Commands—Displays detailed router system and protocol
information without requiring the user to remember complex
command-line languages or syntax
Specifications
Feature
CiscoWorks Windows
Hardware
Requirements
Dedicated, Pentium-based IBM PC or compatible computer
24-MB RAM total (32-MB RAM recommended)
45 MB of free disk space for standard installation (130 MB may be needed if SNMPc third-party
device support files are installed)
CD-ROM drive for installation
Super video graphics adapter (SVGA) and color (1024-by-768 pixels and 256 colors are
recommended)
Network driver interface (NDI) or Open Data-Link Interface (ODI)-compliant network interface card
Software
Requirements
Windows 95 or Windows NT 3.51, 4.0
WinSock-compliant TCP/IP stack (Windows resident TCP/IP stack recommended)
Supported Network
Management
Platforms
Castle Rock SNMPc V4.2 (optionally bundled with the product)
Hewlett-Packard OpenView Professional Suite 7.3 D.02.00, D.01.02
Hewlett-Packard OpenView Network Node Manager 5.0, 5.01 (for Windows NT 4.0)
• 3Com: Transcend Network Management for Windows
• Bay Networks/Nortel: EX Internerwork and EZLAN
143
CiscoWorks Windows
CiscoWorks Windows 3.21
CWPC-3.2-OVW
CWPC-3.2-OVW-SMO
CWPC-3.2-SNMPC
CWPC-3.2-SNMPC-SMO
CWPC-3.2-OVW-SUP
CWPC-3.2-OVW-SEU
CWPC-3.2-OVW-UPG
CWPC-3.2-SNMPC-SUP
CWPC-3.2-SNMPC-SEU
CWPC-3.2-SNMPC-UPG
CWW 3.2 for OpenView Professional Suite and OpenView NNM
CWW 3.2 for OpenView Professional Suite and OpenView NNM on NT (less than 50 nodes)
CWW 3.2 with SNMPc
CWW 3.2 with SNMPc for small/medium offices (less than 50 nodes)
CWW Upgrade to 3.2 for OpenView Prof. Suite NNM/NT (less than 50 nodes)
CWW Upgrade to 3.2 for OpenView Win95/NT Products (more than 50 nodes)
CWW Upgrade to 3.2 for OpenView Professional Suite Upgrade
CWW Upgrade to 3.2 w/ SNMPc- for Small/Medium Offices (less than 50 nodes)
CWW Upgrade to 3.2 w/ SNMPc- for Networks (more than 50nodes)
CWW Upgrade to 3.2 w/ SNMPc Upgrade
CiscoWorks Windows 3.2 Basic Maintenance
CON-SNT-PKG5
CON-SNT-PKG4
CiscoWorks Windows 3.2 w/ SNMPc 4.2 SMARTnet Maintenance
CiscoWorks Windows 3.2 for HP OpenView Professional Suite SMARTnet Maintenance
See the CiscoWorks Windows Web site: http://www.cisco.com/go/cwwin
144
CiscoWorks Blue
CiscoWorks Blue1
The CiscoWorks Blue suite of applications provide the management tools
required to help customers make the transition from legacy networks to
multiprotocol networks, including IP. The different tools support different
platforms, so whether customers want to manage from the mainframe, from
UNIX, or from the Web, there is a CiscoWorks Blue solution for their needs,
When to Sell
Sell This Product
CiscoWorks Blue Native • Router management from the mainframe
Service Point
CiscoWorks Blue
Internetwork Status
Monitor
• Router management from the mainframe
• Status at a glance
• Channel Interface Protocol (CIP) and Channel Port Adapter (CPA)
management
CiscoWorks Blue
Internetwork
Performance Monitor
• Hop-by-hop latency information
• Response time threshold alerts
• Service level reports for network availability and response time
CiscoWorks Blue Maps • Graphical management of IBM SNA/IP Protocols (remote source-route
bridging [RSRB], data-link switching [DLSw], Advanced Peer-to-Peer
Networking [APPN])
• Status at a glance
CiscoWorks Blue SNA
View
• Physical unit/logical unit (PU/LU) control and correlation of IBM SNA
Protocols (requires CiscoWorks Blue Maps)
• Correlation of virtual telecommunications access method (VTAM)
information with IP information to show end-to-end connectivity
Key Features
• Visibility, management, and control of Cisco devices from the mainframe
• End-to-end and hop-by-hop response time for SNA and IP sessions
• Graphical displays of SNA sessions running over Cisco devices
• Correlation of SNA sessions with MAC-level information in the routed
network
145
CiscoWorks Blue
Specifications
Feature
CiscoWorks
Blue Native
Service Point
CiscoWorks
Blue
Internetwork
Status Monitor
CiscoWorks
Blue
Internetwork
Performance
Monitor
CiscoWorks
Blue Maps
CiscoWorks
Blue SNA View
SOLVE: Netmaster
Platform
Compatibility
Tivoli TME/10
Netview for OS/390
IBM Netview for
MVS
Independent, but
SunNet Manager
can run with SunNet HP OpenView
Manager, HP
OpenView, or Tivoli Tivoli TME/10 AIX
TME/10 AIX
Supported
Cisco
Products
Routers running
Cisco IOS software
Release 11.0 or
above
Network containing
at least one router
running Cisco IOS
software Release
11.2 or above
Routers running
Same as
Cisco IOS software CiscoWorks Blue
Release 11.0 or
Maps
above, configured
with RSRB, DLSw, or
APPN
IBM Netview for
MVS 2.4 or above
Tivoli TME/10
NetView for OS/390
Solaris 2.4, 2.5
HP-UX 9.x
AIX 3.2.5, 4.1
SunNet Manager
2.2.3 or 2.3
Solaris 2.5.1 or 2.6
HP OpenView 4.1,
4.1.1, or 5
HP-UX 10.10 or 10.20
NetView for AIX 4.1
or 5 (TME 10
NetView)
AIX Version 4,
Release 1.5 or 2
Routers running
Cisco IOS software
Release 11.0 or
above
Sterling SOLVE:
Software
Requirements Netmaster 3.1 or
above
Same as
CiscoWorks Blue
Maps
SunNet Manager
2.2.3 or 2.3
Solaris 2.5.1 or 2.6
HP OpenView 4.1,
4.1.1 or 5
HP-UX 10.10 or 10.20
NetView for AIX 4.1
or 5 (TME 10
NetView)
AIX Version 4,
Release 1.5 or 2
VTAM 4.1 or above
These products have no competitors.
See the CiscoWorks Blue Web site: http://www.cisco.com/go/cwblue
146
CiscoView 4.2(1) is a GUI-based device management software application that
provides dynamic status, statistics, and comprehensive configuration
information for Cisco Systems' internetworking products (switches, routers,
concentrators, and adapters). CiscoView graphically displays a real-time
physical view of Cisco devices. Additionally, this SNMP-based network
management tool provides monitoring functions and offers basic
troubleshooting capabilities.
Using CiscoView, users can more easily understand the tremendous volume of
management data available for internetworking devices, because CiscoView
organizes it into graphical device representations presented in a clear, consistent
format.
When to Sell
Sell This Product
CiscoView
• Physical view-based monitoring and diagnostics of Cisco devices
• End-to-end Cisco device monitoring
Key Features
• Graphically displays Cisco products from a centralized network
management location, giving network managers a complete view of Cisco
products without physically checking each device at remote sites
• Oriented for exception reporting, allowing users to quickly grasp essential
inquiry information
• GUI that shows a continuously updated physical picture of routers, hubs,
switches, or access servers
• Can be invoked several times in the same session to simultaneously support
multiple switches, routers, hubs, or access servers
147
CiscoView
CiscoView1
CiscoView
Specifications
Feature
CiscoView1
Site Manager, Domain Manager, Enterprise Manager,
HP OpenView
IBM NetView for AIX
Supports Threshold Manager application
Supports TN3270 monitor utility
Integrates with TrafficDirector, VlanDirector™, and Netsys connectivity tools
Routers: Cisco 7500, 7000, 7200, 4700, 4500, and 4000 Series with processing modules; Cisco
AS5200, 3600 series, 25xx series; Cisco 1600, 1000, 700 series
Cisco IOS: Releases 10.0 through 11.2
Concentrators: Cisco 1000, 1200, 1400 series;
Switches: Cisco 1200, 1600, 1700, 1800, 1900, 2100, 2600, 2800, 2900, 3000, and 5000; LightStream
1010 ATM switches
CiscoPro switches and hubs
Site Manager and Domain Manager 2.3, Enterprise Manager 2.0
Solaris 2.5.2, 2.6
HP OpenView 4.11, 5.0. 5.01
HP-UX 10.20, 11.0
IBM NetView for AIX 4.1, 4.2, 5.0
IBM AIX 4.21, 4.3
Service Category
4
1. CiscoView supports all Cisco 25xx series (2501–2525) routers with the exception of Cisco 2506, 2508, 2517,
2518, and 2519.
See the CiscoView site: http://www.cisco.com/go/cview
148
Now you can manage all aspects of network connectivity and performance with
a single service-level management solution. Cisco's Netsys Service-Level
Management Suite makes it easy to understand the inner workings of your
network so that you can quickly solve problems and optimize performance.
Together, the two modules—Connectivity Service Manager and Performance
Service Manager—provide a complete, end-to-end, scalable solution that grows
with your requirements, helping you solve your key network management
challenges today and positioning you to take full advantage of future
innovations.
When to Sell
Sell This Product
Netsys Connectivity
Service Manager V.4.1
• Manage and optimize your network’s connectivity, security, and
reliability—end to end
Netsys Performance
Service Manager V.4.1
• End-to-end performance analysis for problem solving, capacity
planning, and service-level management
Key Features
• Defines, monitors, and assesses service-level policies
• Troubleshoots connectivity and performance problems
• Checks for over 100 common yet difficult-to-isolate configuration
problems
• Gives you the big picture instantly, allowing you to visually navigate your
network and gain a complete understanding of how it works
• Graphically plans data, routing, protocol, and topology changes
• Performs capacity, redundancy, and topology analysis
• Proactively monitors configuration changes
149
Cisco Netsys SLM Suite
Cisco Netsys SLM Suite1
Cisco Netsys SLM Suite
Specifications
Feature
Connectivity Service Manager V.4.1
Performance Service Manager
Platform
Compatibility
Integration with CiscoWorks and CiscoView
Not required
Supported Cisco
Products
LAN topologies: Ethernet, Fast Ethernet, Token Ring,
FDDI, ATM interface
WAN connectivity: Serial, HSSI, BRI, Frame Relay,
IP unnumbered, SDMS, X.25, async, dialer,
channelized T1
Data protocols: IP, IPX, SNA, AppleTalk, VINES,
DECnet
Routing protocols: Routing Information Protocol
(RIP), Interior Gateway Routing Protocol (IGRP),
Enhanced IGRP (EIGRP), Open Shortest Path First
(OSPF), IPX-RIP, source-route bridging (SRB), RSRB,
DLSw+, Border Gateway Protocol (BGP),
Intermediate System-to-Intermediate System
(IS-IS) (IP)
Device Support: All Cisco IOS-based routers,
Catalyst 5000 and 5500 switching products
Same as Connectivity Service Manager plus:
Cisco IOS IP/IPX accounting support; Cisco Switch
Probes (RMON2); Built-in router performance
modes for 7500, 7200, 7000, 7000/RSP, 4700, 4500,
2500, 1005, and AS5100/5200; and Cisco Netflow
Accounting Data
Software
Requirements
SunOS 4.1.3/4.1.4, Solaris 2.5/2.6, Solaris-J
IBM-AIX 4.1.5,
HP-UX 10.x
CWSI V.1.3 switch support
Java-enabled Web browser
Netsys Connectivity Service Manager
These products have no direct competitors.
See the Cisco Netsys SLM Web site: http://www.cisco.com/go/nslms4
150
Avoid costly network configuration problems—have your network checked by
Netsys! Fixing network problems is expensive and time-consuming. The
combination of costly downtime and time-consuming fault isolation and repair
can bring a business to its knees. Geographically dispersed networks amplify the
problem because the length and expense of downtime often increase, and fixing
the problem can require travel.
Most reported network problems are configuration related. More than
40 percent of technical support calls involve device misconfigurations. As the
number of routers grows, configuration problems become harder to detect and
avoid. The result is either operational or latent configuration problems.
When to Sell
Sell This Product
NetSys Baseliner
• Avoid costly network configuration problems by safely testing
configurations offline before committing them to the live network
• Network configuration troubleshooting
Key Features
• Creates a model of your network and checks for more than 100 common
yet difficult-to-isolate configuration problems
• Gives you the “big picture” instantly, allowing you to visually navigate
your network and gain a complete understanding of how it works
• Proactively monitors configuration changes
151
Cisco Netsys Baseliner V.4.0
Specifications
Feature
Netsys Baseliner V.4.1
Not required
LAN topologies: Ethernet, Fast Ethernet, Token Ring, FDDI, ATM interface
WAN connectivity: Serial, HSSI, BRI, Frame Relay, IP unnumbered, SDMS, X.25, async, dialer,
channelized T1.
Data protocols: IP, IPX, SNA, AppleTalk, VINES, DECnet
Routing protocols: RIP, IGRP, EIGRP, OSPF, IPX-RIP, SRB, RSRB, DLSw+, BGP, IS-IS (IP)
Device support: All Cisco IOS-based routers
Windows NT workstation and server
Java-enabled Web browser
Service Number
11
Part Numbers and Ordering Information
Cisco Netsys Connectivity Tools1
BASE-4.0-UNL-NT
CON-SNT-PKG11
Netsys Baseliner 4.0. Unlimited Routers, Win NT
SMARTnet Maintenance
See the Cisco Netsys Baseliner Web site: http://www.cisco.com/go/baseliner
152
Cisco Systems offers a complete
family of dedicated, enhanced LAN,
WAN, and ATM Remote Monitoring
(RMON) probes for comprehensive,
end-to-end, seven-layer monitoring
of an enterprise network. SwitchProbe products provide a powerful distributed
management architecture for performing traffic analysis, troubleshooting, trend
reporting, and proactive network management. The real-time traffic analysis
and trend reporting capabilities of SwitchProbe devices provide visibility into
network behavior for long-term planning. They provide the diagnostic
information needed for troubleshooting the Media Access Control (MAC),
network, or application-layer problems before they can affect network
availability. The probes' network-based thresholding and alarm capabilities
provide an early warning system to improve network reliability and availability.
When to Sell
Sell This Product
Ethernet Probes
• Monitoring Ethernet switch ports
Fast Ethernet Probes
• Monitoring Fast Ethernet Catalyst switch ports
• Half Duplex for SPAN and Full Duplex for Catalyst interswitch and server
links
Token Ring Probes
• Monitoring Catalyst Token Ring switch ports
WAN Probes
• Monitoring fractional T1 and T1 links
• Support: Cisco HDLC, Wellfleet HDLC, DEC HDLC, Proteon HDLC, PPP,
Frame Relay, SMDS, and x.25
HSSI Probes
• Monitoring T3 links
FDDI Probes
• Monitoring FDDI ring (dual)
• Built-in support for monitoring and capturing SMT frames
ATM Probes
• Monitoring ATM (OC3) link
• Support LANE 1.0 and 2.0; Classical IP (RFC 1577); MPOA (RFC 1483); and
UNI 3.0, 3.1, and 4.0
Key Features
• Support of Internet Engineering Task Force (IETF) RMON and RMON2
standards RFC 1757, 1513, 2021, and 2074
• High-performance, Pentium processor in Fast Ethernet, FDDI, Multiport
WAN, Multiport Ethernet, HSSI, and ATM models
• VLAN-aware monitoring capabilities for Cisco ISL (Fast Ethernet models)
• Resource Monitor option, providing proxy SNMP and remote polling for
proactive distributed monitoring
• Out-of-band, or side-band access to management data
153
Cisco SwitchProbe Series
Cisco SwitchProbe Series1
Cisco SwitchProbe Series
Specifications
Feature
SwitchProbe
Management
The probes can be managed through a serial out of band or an Ethernet or Token Ring
sideband. For example, the Fast Ethernet probe comes standard with Fast Ethernet
Interface(s) for monitoring Fast Ethernet ports and an Ethernet sideband used for managing
the probes.
Ports
One serial console port (RS-232-C Type)
One remote port (RS-232-C Type)
Interfaces
Ethernet interface—15-pin D-type 10Base5 (Thicknet), BNC 10Base2 (Thinnet), RJ-45
10BaseT
Token Ring interface—9-pin D-type (Type 1), RJ-45 (Type 2)
FDDI interface—Single (SAS) or dual (DAS) SC-type connectors for SC-to-SC or SC-to-MIC
62.5/125-micron multimode, fiber-optic cable
100BaseTX interface—RJ-45 for Category 5 UTP or Category 5 sheath-shielded TP with
TP-MIC plug
100BaseFX interface—SC-type connector for SC-to-SC or SC-to-MIC 62.5/125-micron
fiber-optic cable
WAN interface—26-pin D-type V.35/X.21, externally clicked up to T1/E1 speeds
HSSI interface—26-pin, D-type SCSI II connectors externally clocked up to T3/E3 speed
ATM OC-3 multimode fiber interface—Two SC connectors
See the Cisco SwitchProbe Web site: http://www.cisco.com/go/switchprobe
154
Service and Programs
Service and Support Matrix
Service and Support Matrix
Cisco Packaged Service Products
Technical
Online Assistance Cisco
Warranty Support Center
Software
Extension (CCO)
(TAC)
Updates
Hardware
Replace- Onsite
ment
Service
Configuration
Services
—
SMARTnet
Maintenance
Yes
Unlimited
Yes
(IOS)
Next business —
day
—
SMARTnet
Onsite
—
Yes
Unlimited
Yes
(IOS)
4 hour
4 hour
—
Software
Application
Support Plus
Upgrades
—
Yes
Unlimited
Yes
—
—
—
Install Plus
Config
—
—
—
—
—
Physical
hardware
setup
Simple
configuration
—
Advance
Replacement
—
One incident
—
Next business —
day
—
155
Service and Support Offerings
Cisco offers a variety of startup services, maintenance services, and consultation
services. The following table gives a brief description of each offering.
Product
Description
Startup Services
Advanced
Installation
Services (AIS)
Provides a variety of services that meet your LAN installation requirements;
AIS has three options:
• INSTALL provides onsite support and remote technical assistance for Cisco
LAN network installation
• INSTALL PLUS is a more comprehensive package that includes
configuration support during installation
• DEPLOYMENT provides you with seamless network implementation
services that assist you in deploying large LAN networks
Network
Implementation
Services (NIS)
Provides complete, seamless support of network development for Cisco WAN
products; it includes project management, project engineering, and onsite
installation
Global Solution
Services
Installation
Provides services to help multinational customers efficiently prepare for and
install all Cisco products
Maintenance Services
SMARTnet
Maintenance
Provides customers with software maintenance, registered access to CCO,
advance replacement of hardware, and technical support required for
self-maintenance. SMARTnet maintenance has three delivery options:
• SMARTnet Next Business Day (NBD)—8 hours/day, 5 days/week,
next-business-day hardware replacement
• SMARTnet 8 x 5 x 4—8 hours/day, 5 days/week, 4-hour hardware
replacement
• SMARTnet 24 x 7 x 4—24 hours/day, 7 days/week, 4-hour hardware
replacement
Each level of SMARTnet services is available in a shrink-wrapped package,
allowing it to be effectively marketed through resellers
SMARTnet Onsite
Provides all the benefits of SMARTnet maintenance, plus one of the following
remedial onsite hardware services:
• SMARTnet Onsite—8 hours/day, 5 days/week, next-business-day response
• SMARTnet Onsite 8 x 5 x 4—8 hours/day, 5 days/week, 4-hour response
• SMARTnet Onsite 24 x 7 x 4—24 hours/day, 7 days/week, 4-hour response
Packaged SMARTnet OnSite 24 x 7 x 4 provides SMARTnet OnSite 24x7x4
service in a shrink-wrapped package, allowing it to be effectively marketed
through resellers.
Cisco Advance
Replacement
Provides customers with next-business-day replacement of hardware, and
assistance from the TAC, by telephone, on a single occasion.
Packaged Cisco Advance Replacement provides Cisco Advanced
Replacement in a shrink-wrapped package, enabling it to be effectively
marketed through resellers.
Global Solution
Services (GSS)
SMARTnet and SMARTnet Onsite support for multinational customers; the
customer has two options for service delivery:
Single point of contact (SPOC)—worldwide service delivered from Cisco
Local support—in-country service provided by a network of authorized GSS
providers
In addition, GSS offers central purchasing for purchases destined for multiple
countries, with local product delivery supplied by in-country partners.
156
Description
Cisco provides the following noncontract services:
• 24-Hour Telephone Support—telephone consultation to help troubleshoot
hardware, software, or configuration problems
• Billable Onsite Field Services—onsite remedial service, installation,
ECO/FCO installation, and system updates and upgrades
• Advance Replacement Parts—advance replacement parts shipped
overnight on an as-required basis via next-business-day delivery service
• Return for Exchange—a service that exchanges customer-returned parts
with parts of equal or better type, function, or quality
Product
Noncontract
Services
Consultive Services
Network Supported Provides personalized, proactive support, including a designated team of
Accounts
Cisco Certified Internetwork Expert (CCIE) support engineers who act as a
remote extension of a customer's internal network operations group
Professional
Services
Offers four services, which are performed by Cisco Professional Services
Providers:
• Program and Project Management
• WAN Audit
• LAN Assessment
• Consulting Services
Service and Support Key Selling Points
• Broad range of services and programs—Cisco offers the broadest choice of
network services in the industry, including self-maintenance, assistance,
online resources, remote TAC, remote consultation, 24 x 7 onsite service,
and other onsite professional services.
• Corporate commitment—Cisco Systems is making substantial investments
in all customer services. Cisco sets goals for and measures customer
satisfaction each year. Manager and individual contributor bonuses are tied
to these goals.
• Experience—All of Cisco’s support teams are staffed by experienced
customer service engineers, professionals, and certified consultants and
partners. Cisco has rigorous certification programs to ensure that all
technical personnel have the knowledge they need to support its customers’
mission-critical applications.
• Global presence, experience, and capability—Cisco has a network of global
service partnerships to ensure that qualified local service is available no
matter how remote the location. Cisco Partner reps follow rigorous
certification programs to ensure that they have the knowledge needed to
support Cisco customers. Cisco has depots located in the United States,
Canada, Europe, Latin America, and Asia so that parts are quickly
available when customers need them.
• Quality—Cisco has received ISO 9001 certification, a clear indication of
the company’s commitment to quality management and customer
satisfaction.
157
• Software value—Cisco IOS software updates and upgrades, an entitlement
of SMARTnet and SMARTnet Onsite support contracts, make Cisco
hardware “evergreen,” allowing for greater bandwidth, performance,
features, and security.
• Innovative online support and services—Cisco Connection Online (CCO)
provides the industry’s best information retrieval, technical support, and
electronic commerce (DataComm Survey, 1996).
• Extending the value of the product—Cisco services increase performance,
utility, and life span of Cisco products.
Cisco Reseller Service and Support
Cisco’s service solutions are designed to provide resellers and distributors the
service foundation to fulfill their customers’ service requirements. Cisco has
developed a support strategy to meet the needs of both resellers that wish to
provide support to their customers and those who choose not to.
Other Cisco Resources
Cisco provides technical tools and tips on line to assist customers and resellers.
More information on these tools can be found at the following Web site:
www.cisco.com/public/serv_tools.shtml. Information on technical tips can be
found at www.cisco.com/public/serv_tips.shtml.
The service products listed below are available in the following countries:
Australia, Canada, EU countries, Norway, Switzerland, and United States.
Cisco Service Products1
CON-SNT-PKG(x)
CON-MYSNT-PKG(x)
CON-SNTE-PKG(x)
CON-SNTP-PKG(x)
CON-OS-PKG(x)
CON-OSE-PKG(x)
CON-OSP-PKG(x)
CON-SAU-PKG(x)
BS-INSTALL-PKG
CON-AR-PKG(x)
CON-EXTEND-PKG(x)
SMARTnet 8 x 5 x Next Business Day
3-year SMARTnet 8 x 5 x Next Business Day
SMARTnet 8 x 5 x 42
SMARTnet 24 x 7 x 4 2
SMARTnet Onsite 8 x 5 x Next Business Day
SMARTnet Onsite 8 x 5 x 42
SMARTnet Onsite 24 x 7 x 42
Software Application Support plus Upgrades
Install plus Config
Cisco Advance Replacement
Cisco Extend
1. Cisco has assigned most of its service products to one of 18 categories. The (x) in the part number signifies
the category number. To determine which category a product belongs to, see Cisco’s Product to Service
Category tool at http://www.cisco.com/warp/public/779/smbiz/service/smartnet/index.html.
2. This service is available only within the following distance from a parts depot or Cisco-authorized service
location: in the U.S., 75 driving miles; in Europe and Canada, 120 driving kilometers; in Australia, 75 driving
kilometers. To determine if this level of service is available for a particular location, use the Cisco Service
Availability matrix at http//www.cisco.com/warp/public/779/smbiz/service/smartnet/index.html.
158
Warranty
Products Covered1
Warranty
Warranty
Description
90-Day Advance Cisco 2500, 2600, 3600, 3800, 4000, • Advance Replacement, 5-day ship; if a
7000, 12000, Catalyst 1400, 1800,
hardware problem arises, a replacement
Replacement
2900, 3000, 3900, 5000, 8500, Cisco unit is sent in advance of receiving the
AS5X00, Internet appliances, PIX problem unit, shipped within five days
Firewall, LocalDirector, WAN
• IOS software maintenance releases of
products, and application
“bug fixes”
software
• TAC access for problem isolation and
Return to Manufacturer Authorizations
(RMA) for returning the problem unit
• Guest access to Cisco Connection Online
(CCO)
One-Year Return Cisco 100, 200, 300, 700, 800, 1000, • Return for replacement for one year, with
10-day turnaround; if a hardware problem
to Factory (RTF) 500, 1600, 1700, Catalyst 1900,
2820, 2900XL, FastHub, Micro
WebServer, 90-I Agent, plus
legacy products
Five-Year Return Cisco 90-I
to Factory (RTF)
arises, a replacement unit will be sent
within 10 days of receipt of the problem unit
“bug fixes” for the first 90 days
• Guest access to CCO
• Return for replacement for five years, with
10-day turnaround; if a hardware problem
arises, a replacement unit will be sent
within 10 days of receipt of the problem unit
“bug fixes” for the first 90 days
• Guest access to CCO
1. If product is not specifically annotated under one-year or five-year warranty, assume 90-day Advance
Replacement. To be sure, refer to the Cisco Information Packet that shipped with the product or ask your
hardware supplier.
159
Distribution Financing
Distribution Financing
Distribution Financing (also known as “Floorplanning”) is financing of
equipment for inventory or resale using the value of the equipment as collateral
for the loan. Cisco subsidizes through its financing partner, Deutsche Financial
Services (DFS), up to 60 days free repayment terms on purchases of all Cisco
products. The Distribution Financing Program is available for Cisco Direct
value-add resellers (VARs) as well as Premier VARs purchasing from Cisco
authorized distributors.
Key Features
Distribution Financing benefits reseller partners in the following ways:
• Increased credit capacity and longer payment terms
• 100-percent advance on Cisco inventory compared to bank inventory loans
• Improved working capital because payment terms match cash flow
• Reduced administration of ordering and payables
• Access to other financing options, including accounts receivable, purchase
order, and short-term loans
How to Get Started
Contact your Cisco or distributor sales representative and see steps below:
1
2
3
4
5
Identify reseller partner’s needs.
Partner contacts DFS and indicates if a Cisco direct or Premier VAR reseller.
DFS Business Development Manager meets with reseller and reviews program.
Credit approval is secured through DFS and documentation is provided to partner.
Reseller places purchase order with Cisco or distributor and references DFS as financing
source.
6 Cisco or distributor ships product per reseller instructions and invoices DFS.
7 DFS pays Cisco or distributor and invoices reseller as if billed by vendor.
8 Reseller pays DFS according to schedule and creates new credit availability.
For more information on this and other Cisco Systems Capital Financing
products, call 800 730-4090, option 2 (available in U.S only).
160
Purchase Order Financing is designed to give reseller partners the ability to bid
on large projects without impacting current lines of credit. This program
provides incremental credit capacity based on the strength of the end-user
customer. By utilizing this program, a reseller can finance a sale, outside of
vendor and banking credit lines, until their customer actually pays. The
Distribution Financing Program is available for Cisco direct VARs as well as
Premier VARs who establish a relationship with Deutsche Financial Services
(DFS).
Benefits
Purchase Order Financing benefits reseller partners in the following ways:
• Ability to compete on large projects without financial concern
• Increased credit because it does not impact current lines of credit
• Incremental financing until your customer pays
• Affordable rates after Cisco-subsidized free period
• Improved working capital
• Access to other financing options including, accounts receivable, inventory,
and short-term loans
How to Get Started
Contact Worldwide Financial Services and see steps below:
1 Reseller identifies opportunity for large sale and is awarded bid or contract.
2 Reseller contacts Cisco for credit qualification of the end user, and receives documents from
DFS.
3 Reseller signs documentation and forwards Notice of Assignment letter to end user for
signature.
4 Submit purchase order to Cisco/distributor, referencing bill to DFS.
5 Cisco or distributor ships product to reseller and invoices DFS.
6 Reseller ships/installs product to end user and bills end user with remit to address of DFS.
7 End User remits payment to DFS lock box.
8 DFS pays reseller the margin less any financing costs if payment is received after the free
period.
For more information on this and other Cisco Systems Capital Financing
products, call 800 730-4090, option 2 (available in U.S only).
161
Purchase Order Financing
162

Table of Contents Table of Contents Introduction Routers and

Transcription

Similar documents

Cisco Recruitment Session* When

crescent village - Prime Commercial, Inc.

Cisco.com AEM Integration and Migration

Read More - FusionStorm

Virtual Lock for Corporate IP Telephony v 3.0

5.3.4.2 Lab - Hard Drive Maintenance in Windows 7

Single pane of glass: Myth or reality?

Cisco Chooses to Be Smart in Songdo

CCNA 3—Switching Basics and Intermediate Routing