SERVING POWER INDUSTRY

SERVING
POWER INDUSTRY
Member of CEZ Group
ŠKODA PRAHA is a traditional Czech Engineering,
Procurement & Construction (EPC) Company that delivers
power projects on a turnkey basis – our scope includes
design, equipment supply, construction, start-up
and commissioning as well as warranty
and post-warranty services.
ŠKODA PRAHA also provides wide range of various
engineering and consultancy services.
02 | INTRODUCTION
INTRODUCTION
| 03
ŠKODA PRAHA is being recognized as an important
and recommended integrator of state-of-the-art
energy systems and equipment provided by various
Czech and global manufacturers.
ŠKODA PRAHA provides quality, innovative and competitive
engineering solutions that meet individual needs of our
clients. Our projects are well known for excellent reliability,
efficiency and advanced technological quality with respect
of environmental protection criteria.
TURNKEY SUPPLIES
ŠKODA PRAHA is an EPC contractor of power plants
on turnkey basis. Our portfolio of services also includes
technologies for environmental protection such as power plant
desulphurization, denitrification and dust removal. We provide
rehabilitation of existing plants to increase their efficiency,
extend lifetime and improve safety.
TAILOR MADE SOLUTIONS
The advantage of ŠKODA PRAHA is the focus on needs
and preferences of our customers.
ENGINEERING AND CONSULTANCY
SERVICES
Serving our clients as owner’s engineer, we support
and advise the project owner during all stages of project.
As design engineer we provide to our customers overall
engineering as well as specific design activities.
EXPORT FINANCING
Supporting our customers to cover all aspect of the power
project, škoda praha offers assistance with various
alternatives of export financing always being structured
individually to meet our customer’s expectation.
EXPORT OF POWER PLANTS
Over many years ŠKODA PRAHA has built excellent
experience with construction of power plants that is proven
by extensive list of international reference projects.
Our mission is to continue the long term tradition of being
the integrator of important Czech manufacturers exporting
power plant systems and equipment.
04 | INTRODUCTION
INTRODUCTION
| 05
AREAS WE SERVE
01
06 | AREAS WE SERVE
FOSSIL FUEL PLANTS
Coal fired • Gas fired • Oil fired
ŠKODA PRAHA acts as EPC Contractor and EPC Manager (EPCM) as well as a provider
of engineering, owner’s engineering and consultancy services. ŠKODA PRAHA provides tailor
made engineering solutions using the state of art technologies. ŠKODA PRAHA also supports
international clients by export financing.
02
NUCLEAR POWER PLANTS
03
RENEWABLES AND WASTE TO ENERGY
Conventional Island of nuclear power plants • Balance of plant
Specific know-how of ŠKODA PRAHA includes consultancy and Owner’s Engineering (OE)
services for nuclear power plants. As EPC contractor of nuclear power plant projects in Czech
and Slovak Republic, we have maintained our competency for supplies of conventional island
and balance of plant. Our activities include upgrade of power plant systems, increase of power
output and implementation of most recent safety standards.
Biomass • Biogas • Waste to Energy
In cooperation with recognized global manufacturers, ŠKODA PRAHA
offers EPC and engineering services of biomass fired and biogas stations
as well as municipal waste incineration plants.
AREAS WE SERVE
| 07
OUR SERVICES
EPC - TURN KEY
SOLUTIONS
ENGINEERING
AND
CONSULTING
EPC
EPCM
Engineering / Procurement / Construction
Engineering, Procurement
and Construction Management
• Design
• Procurement
• Construction
• Commissioning
• Testing
• Warranty and post-warranty services
08 | OUR SERVICES
On behalf of client ŠKODA PRAHA provides:
• Project management
• Tender management
• Design coordination
• Construction management
• Commissioning management
DESIGN ENGINEER
• Conceptual design elaboration
• Preparation of technical specifications
of equipment and systems
(mechanical, civil, electrical, I&C)
• Coordination of design provided by
suppliers
• Design supervision during construction
• Commissioning programs
and operation manuals
OWNER`S ENGINEER
• Technical and commercial support
of the client
• Conceptual design
• Tender management
• Design review
• Supervision of EPC contractor during
CONSULTANT
• Feasibility studies
• Project development and management
consultancy
• Tender assistance
execution
• Commissioning assistance
OUR SERVICES
| 09
OUR STRENGHTS
62
years of history
25 100
countries
power units
40 000
MW of installed capacity
Long term tradition of well-known
brand Škoda Praha
ŠKODA PRAHA is a 100% subsidiary
of CEZ – the largest producer and
distributor of electricity in Central
and Eastern Europe
Continuous development of unique
know-how to offer state of art
technical quality, efficiency, reliability
and environmental protection
Supporting clients with export
financing and export credit insurance
Providing wide range of services
including engineering and
consultancy up to EPC
A proactive customer oriented
approach and tailor made engineering
solutions
Team of experienced professionals
10 | OUR STRENGHTS
OUR STRENGHTS
| 11
REFERENCES
Tušimice II POWER PLANT,
Czech Republic
EPC rehabilitation of 4 x 200 MW lignite fired
units. In this project, all equipment was replaced
while respecting the existing layout. Emissions
were reduced and net efficiency was increased
to over 39%. The plant was put in operation
in 2012.
Počerady combined cycle power
plant, Czech Republic
EPC delivery of the 840 MW combined cycle
power plant consisting of 2 gas turbines + 2 heat
recovery steam generators + 1 steam turbine.
The net efficiency exceeds 58%. The plant was
put in operation in 2013.
Ledvice POWER PLANT,
Czech Republic
EPC delivery of ultrasupercritical 660 MW
lignited fired unit. Estimated net efficiency
of 42,5%. The plant is being commissioned.
Commercial operation is expected in the first
quarter of 2016.
PLANT DELIVERY
PARAMETERS
SCOPE OF
Mtkvari, Georgia, 2015
2 x 21,5 MW, hydro
owner’s engineer for the construction of a hydropower plant
Can Odas, Turkey, 2015
300 MW, coal
owner’s engineer for a coal-fired plant relocation
Tkibuli, Georgia, 2014
150 MW, coal
feasibility study for new coal power plant
Gardabani, Georgia, 2012-2014
160 MW, coal
owner’s engineer for the construction of a thermal power plant
with connection to an existing service
Ledvice, CR, under construction
660 MW, coal
EPC delivery of a new unit with supercritical steam parameters
Prunéřov II, CR, under construction
3x 250 MW, coal
EPC delivery of comprehensive reconstruction of three power plant units
Počerady, CR, 2014
840 MW, gas
EPC delivery of combine cycle unit
Dukovany, CR, 2012
4x 440 MW, nuclear
increased performance and life time of operated blocks
Tušimice II, CR, 2012
4x 200 MW, coal
EPC delivery of overall reconstruction of four units of the power plant
New Talkha, Egypt, 2009
750 MW, gas
design and supply of technological, equipment including installation
and commissioning
El Kureimat II, Egypt, 2010
750 MW, gas
design and delivery of technological equipment, including installation
and commissioning
NPP J. Bohunice V2, SR, 2010
2x 505 MW, nuclear
design, assembly and supply of turbine generators to improve performance
and durability of operated units
Věžnice, CR 2009
2x 2 MW, wind
EPC supply
Nováky, SR, 2009
4x 110 MW, coal
dewatering gypsum, ash handling, steam extractions for heat supply
Mochovce, SR 2008
2x 440 MW, nuclear
replacement of generator coolers
Shen Tou, China 2005
2x 500 MW, coal
design and supply of technological equipment for the plant
Afsin Elbistan B, Turkey, 2005
4x 360 MW, coal
design, delivery of electrical and control systems for boilers
NPP Temelin, CR, 2003, 2002
2x 1 000 MW, nuclear
EPC supply of technology, including documentation,
installation and commissioning
Felton 2, Cuba, 2001
1 x 250 MW, oil
EPC supply of heavy fuel oil fired unit
Ayoun Moussa, Egypt, 2000
1 x 250 MW, oil
design, supply, installation and commissioning of the power unit
Mochovce, SR 2000, 1998
2x 440 MW, nuclear
EPC supply of technology, including documentation, installation, and
commissioning
Nováky, SR, 1998 2 x 110 MW, coal
EPC delivery of desulfurization plant
Talkha, Egypt, 1995 2 x 210 MW gas/oil
EPC delivery of two gas heavy fuel oil fired units
Shen Tou, China 1993
2x 500 MW, coal
design and supply of technological, equipping of units
NPP Dukovany, CR, 1985-1987
4x 440 MW, nuclear
EPC supply of technology, including documentation, installation,
and commissioning
NPP J. Bohunice V2, SR,
1985, 1984
2x 440 MW, nuclear
EPC supply of technology, including documentation, installation,
and commissioning
Soma 1–6, Turkey, 1983–1992
6x 165 MW, coal
EPC supply
Melnik III, CR, 1980
500 MW, coal
EPC delivery of the technology, including installation and commissioning
NPP J. Bohunice V1, SR,
1980, 1979
2x 440 MW, nuclear
EPC supply of technology, including documentation, installation,
and commissioning
Nuevitas, Cuba, 1979, 1972, 1969
3x 64 MW, mazut
design, supply of technological equipment, supervision
Počerady I, II, CR, 1977, 1971, 1970
2x 200 MW, coal
EPC delivery of the technology, including installation and commissioning
Ennore, India, 1971, 1970
2x 60 MW, coal
design, supply of technological equipment, supervision
Ledvice, CR, 1967
200 MW, coal
EPC delivery of technological parts, including installation and commissioning
A part of a/m selected references was executed together with the sister company ŠKODA PRAHA Invest s.r.o.
12 | REFERENCES
REFERENCES
| 13
Traditional Czech brand
HISTORY
SOCIAL RESPONSIBILITY
2015
ŠKODA PRAHA
ŠKODA PRAHA benefits from its over sixty years of history,
providing customers worldwide with power generation units,
individual equipment and upgrading existing technologies.
We also apply our know-how in the field of engineering
and consulting.
• promotes the installation of environment friendly
2014
certification according to BS OHSAS 18001
2005
ČEZ becomes the majority owner of ŠKODA PRAHA
2001
certification according to EN ISO 14001
1998
certification according to EN ISO 9001
1990
transformation into the joint stock company
ŠKODA PRAHA
1953
state enterprise Energostroj founded
technologies,
• in its own and its suppliers’ practice, fully enforces
procedures to protect the environment,
• uses natural resources efficiently.
• follows common ethics principles.
• develops professional skills.
• governs itself by the rules of social responsibility.
CERTIFICATION
14 | ŠKODA PRAHA - Traditional Czech brand
ŠKODA PRAHA - Traditional Czech brand
| 15
Headquarters
ŠKODA PRAHA Inc.
Duhová 1444/2, 140 00 Prague 4
Czech Republic
Phone: +420 211 045 242
E-mail: [email protected]
www.skodapraha.cz
Branch office ŠKODA PRAHA a.s..
Mochovce organizational unit
kpt. Nálepku 80, 934 01 Levice
Slovak Republic
Member of CEZ Group