Sandro

Sandro
268
Sandro LED
65
Design by Ares Concept
• Bollard light for outdoor installation.
• Configuration: extruded aluminium structure
• Double layer coating for high resistance to corrosion: The aluminium
components are painted with a double coat using powders which are
complaint with QUALICOAT standards: a first layer of epoxy powder (with
excellent chemical and mechanical resistance) and a second finishing layer
of polyester powder (resistant to UV rays and atmospheric agents).The
entire painting process of the aluminium fitting starts from components
which have been sand-blasted in advance to make the surface more porous
and increase the adherence of the paint. Ares effects alkaline and acid
washing to clean the surfaces completely, then rinses with demineralised
water to remove any residue particles, subsequently a chemical conversion
treatment is done to protect against rusting.
• Uv-stabilized satin polycarbonate, expanded silicone gaskets.
• Protection Rating: IP65
• In compliance with EN 60598-1
• Class of insulation: II
• Installation: the luminaire is equipped with a piece of cable and a wiring
kit with crimp connectors and adhesive lined heat-shrink tubing for a
watertight electrical connection. The use of a corrugated tube (ø30-50mm)
allows an easier connection to the line. We recommend installation on a
concrete basement or surface, directly with bolts or through the dedicated
fixing plate (to be ordered separately).
EU Regulation 874/2012 - Illumination equipment energy classes
A++
A+
A
1. White
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
which cannot be replaced
2. Aluminium
Bollard light
3. Anthracite
4. Black
9. Rust-red
Pre-wired with approx
200mm of cable
Protection against
impact.
IK 10 - 20,00 joule
2015
269
Sandro Power LED / H. 500 mm
502004 A A+ A++
Lux
120˚
COOL WHITE 6000K
POWER LEDs
5x1W/100÷240V
Total power 8W
LED lm 650 ≠ FIXT lm 255
CRI >70
Electronic power supply included
1
90˚
65
205
365
60˚
5
25
0
600
cd / 1000 lm
C0 / C180
C90 / C270
-2
-1
0
m
1
-1
502005 A A+ A++
NATURAL WHITE 4000K
POWER LEDs
5x1W/100÷240V
Total power 8W
LED lm 560 ≠ FIXT lm 220
CRI >80
Electronic power supply included
502006 A A+ A++
60
500
245
160
100
POWER LED
5x
WARM WHITE 3000K
POWER LEDs
5x1W/100÷240V
Total power 8W
LED lm 520 ≠ FIXT lm 204
CRI >80
Electronic power supply included
Sandro Power LED / H. 900 mm
502001 A A+ A++
Lux
120˚
COOL WHITE 6000K
POWER LEDs
5x1W/100÷240V
Total power 8W
LED lm 650 ≠ FIXT lm 255
CRI >70
Electronic power supply included
145
105
60˚
600
cd / 1000 lm
C0 / C180
502002 A A+ A++
245
NATURAL WHITE 4000K
POWER LEDs
5x1W/100÷240V
Total power 8W
LED lm 560 ≠ FIXT lm 220
CRI >80
Electronic power supply included
60
900
502003 A A+ A++
160
270
100
POWER LED
5x
WARM WHITE 3000K
POWER LEDs
5x1W/100÷240V
Total power 8W
LED lm 520 ≠ FIXT lm 204
CRI >80
Electronic power supply included
2015
1
90˚
C90 / C270
5
-2
-1
25
0
m
0
65
1
-1
Accessories: Sandro LED
138
237
acc. code
SPD: (SURGE PROTECTION DEVICE) 275Vac
MAXIMUM DISCHARGE CURRENT 10KA (8/20μs)
MAXIMUM OPERATING CURRENT 5A
SUITABLE FOR SERIES CONNECTION - IP66
30
100
50
170
BASE PLATE AND FIXING BOLTS
160 x 100 x H 170mm
Accessories chart
160
65
138 237
prod. code
502001
502002
502003
502004
502005
502006
●
●
●
●
●
●
●
●
●
●
●
●
Correct Fixing Method
Correct Fixing Method
Incorrect Fixing Method
Bollard fixed on plinth + plug
Bollard fixed on plinth + fixing bolts
Do not fix the bollard directly on the ground
2015
271