3.34 Why can`t I unlock the screen using my fingerprint?

Transcription

HUAWEI Mate s Special
features FAQs
V1.0
Author
HUAWEI Mate S R&D Team and Qiu Yu (employee ID: 102646)
Date
September 2015
HUAWEI TECHNOLOGIES CO., LTD.
September 2015
INTERNAL
i
Copyright © Huawei Technologies Co., Ltd. 2015. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address:
Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website:
http://www.huawei.com
Email:
[email protected]
September 2015
INTERNAL
ii
September 2015
Version
Changed By
Change Description
Date
V1.0
Qiu Yu (employee ID:
102646)
Completed the first version
2015-09-24
INTERNAL
3
Contents
1 Hardware and exterior .............................................................................................................................. 10
1.1 Why does my phone not recognize my SIM card? ...................................................................................................................... 10
1.2 Manufacturing issues ................................................................................................................................................................... 11
1.2.1 Why is there a gap between the screen and bezel? Why is the gap uneven? ............................................................................ 11
1.2.2 Why does the camera flash catch on my hand? ........................................................................................................................ 11
1.2.3 Why does the fingerprint reader catch on my hand?................................................................................................................. 12
1.2.4 Why are the plastic antenna cutouts not flush with the rear cover? .......................................................................................... 12
1.2.5 Why are there three faint marks either side of the earpiece on the Gold Mate S? .................................................................... 12
1.2.6 Why do the power key and volume key protrude by different lengths from the phone? .......................................................... 12
1.2.7 The paint has rubbed off my black/purple phone, leaving white marks visible. Why? ............................................................ 13
1.2.8 The rear cover on the phone bends when pressed. Why? ......................................................................................................... 13
1.2.9 The tempered glass screen protector has an uneven surface. Why? ......................................................................................... 13
1.2.10 After some use, the phone's front and rear housing have dents. Why? ................................................................................... 14
1.2.11 The rear camera lens cover is cracked or scratched. Why? ..................................................................................................... 14
1.2.12 Why is the rear flash cover recessed? ..................................................................................................................................... 14
1.2.13 Why is there a gap between the rear housing and the phone keys or SIM card tray? Why is the gap so wide or uneven? .... 14
1.2.14 Why is there a gap between the rear housing and the flash cover? Why is the gap so wide or uneven? ................................ 14
1.2.15 Why is there a gap between the front and rear housing? Why is the gap so wide or uneven? ................................................ 15
2 System features and settings ................................................................................................................... 16
2.1 How do I use smart unlock? ........................................................................................................................................................ 16
2.2 How do I enable gray display mode?........................................................................................................................................... 18
2.3 What is multi-window mode and how do I enable it? ................................................................................................................. 19
2.4 What is encrypted SMS? ............................................................................................................................................................. 19
2.4.1 How do I activate encrypted SMS? .......................................................................................................................................... 19
2.4.2 Encrypted SMS activation failed. Why? ................................................................................................................................... 20
2.4.3 When I send an encrypted message, the recipient only sees garbled text. Why? ...................................................................... 20
2.4.4 I am unable to view encrypted messages. Why? ...................................................................................................................... 20
2.4.5 Nothing happens when I select an encrypted SMS. Why? ....................................................................................................... 20
2.4.6 The remaining characters counter to the right of the compose window is inaccurate. Why? ................................................... 21
2.4.7 Why are some messages still garbled even after I decrypt them with my password? ............................................................... 21
2.4.8 Why can't I copy or forward encrypted messages? ................................................................................................................... 21
2.4.9 Why can't I always use my fingerprint to decrypt messages? ................................................................................................... 21
September 2015
INTERNAL
4
2.4.10 How do I back up and restore encrypted messages? ............................................................................................................... 21
2.5 What is native 24-bit decoding? .................................................................................................................................................. 21
2.5.1 If I need to achieve a signal-to-noise ratio (SNR) of 110 dB, what sort of test file should I use? ............................................ 22
2.5.2 When listening to music, how do I activate low-power audio playback to prolong battery life? ............................................. 22
2.6 How can I print from my phone? ................................................................................................................................................. 22
2.6.1 Why can't I find my printer on my phone? ............................................................................................................................... 23
2.6.2 Can I use long-edge or short-edge binding to print double-sided photos?................................................................................ 23
2.6.3 I am using an Epson L455. Why don't my photos print properly?............................................................................................ 23
2.7 Directional recording ................................................................................................................................................................... 23
2.7.1 How can I add text or photos to audio recordings?................................................................................................................... 23
2.7.2 What is directional recording? .................................................................................................................................................. 24
2.8 What are the features of the Pro camera mode?........................................................................................................................... 26
2.9 How do I enable the Pro camera mode? ...................................................................................................................................... 26
2.10 How can I view the properties of an image?.............................................................................................................................. 26
2.11 Why doesn't the screen turn off when I place my phone next to my ear during a call? ............................................................. 26
2.12 There is condensation on my screen. Why does the screen turn off during a call when the proximity sensor is not covered? . 27
2.13 There is condensation on my screen. Why doesn't the touchscreen work? ................................................................................ 27
2.14 Smart screenshot ........................................................................................................................................................................ 27
2.14.1 What is smart screenshot?....................................................................................................................................................... 27
2.14.2 Are there any differences between screenshot using knuckles or composite buttons? ........................................................... 27
2.14.3 Why does my phone suddenly take a screenshot when I use it normally? ............................................................................. 27
2.14.4 How do I partially capture the screen? ................................................................................................................................... 27
2.14.5 Why can't I draw a track and partially capture a screenshot using my knuckle? .................................................................... 28
2.14.6 How do I disable the Smart screenshots feature? ................................................................................................................... 28
2.14.7 Why do I fail to partially capture the screen even if I draw a circle? ..................................................................................... 28
2.14.8 Does smart screenshot affect the phone's standby time? ........................................................................................................ 28
2.14.9 How do I share the screenshot using the smart screenshot function? ..................................................................................... 29
2.14.10 How do I save or cancel the screenshot using the smart screenshot function? ..................................................................... 29
2.14.11 How do I edit the partially captured screen using the smart screenshot function? ............................................................... 29
2.14.12 Why can't I slide to answer an incoming call and why is there a light blue screenshot track on the screen? ....................... 30
2.14.13 How can I avoid accidentally triggering the smart screenshot function? ............................................................................. 30
2.14.14 Why is there a light blue screenshot track when I perform operations on the screen? ......................................................... 30
2.14.15 Why can't I take consecutive multiple smart screenshots? ................................................................................................... 31
2.14.16 How can I capture square-shaped, circular, or heart-shaped screenshots? ............................................................................ 31
2.14.17 How do I enable the Knuckle Control feature?..................................................................................................................... 31
2.15 Screen recording ........................................................................................................................................................................ 31
2.15.1 How do I start and end a screen recording? ............................................................................................................................ 31
2.15.2 When I am using the Mini mode for screen recording, why does the recording consist of several files, each of around 10
MB? ................................................................................................................................................................................................... 32
2.15.3 Why is the resolution poor when using Mini mode for screen recording? ............................................................................. 32
2.15.4 Why can't I record a video, make a voice recording, or send voice messages when I am using the screen recording feature?
........................................................................................................................................................................................................... 32
September 2015
INTERNAL
5
2.15.5 Where are screen recording files stored? Why does my phone say that there is insufficient storage space when I still have
space remaining on my microSD card (or internal storage)? ............................................................................................................. 32
2.15.6 Why does the screen recording end automatically? ................................................................................................................ 32
2.15.7 I always need to wait for the timer to countdown before the screen recording starts. Is there a quicker way to start a screen
recording? .......................................................................................................................................................................................... 33
2.15.8 The screen recording timer button is obstructing the controls in my game. What can I do? .................................................. 33
2.15.9 My screen recording failed to be shared over WeChat?.......................................................................................................... 33
2.15.10 Motion control often fails to work properly when starting/stopping a screen recording. Why? ........................................... 34
2.15.11 Why can't I play screen recordings in full-screen mode on my phone (or my friend's phone)? ........................................... 34
2.15.12 Why doesn't the virtual navigation bar work when I'm playing a screen recording? ............................................................ 34
2.15.13 When sending screen recordings in WeChat, why does WeChat need to compress the recording? Why does the resolution
decrease? ........................................................................................................................................................................................... 34
2.16 Images........................................................................................................................................................................................ 34
2.16.1 How can I preview a thumbnail? ............................................................................................................................................ 34
2.16.2 How much can I zoom in on an image preview? .................................................................................................................... 34
2.16.3 Why does the size of image previews vary? When I release my finger, why doesn't the phone open the image? ................. 35
2.16.4 How can I disable the preview feature in the month view? .................................................................................................... 35
2.16.5 Is the image preview feature in the month view still available when pressure sensing is disabled? ...................................... 35
2.16.6 How can I adjust the pressure that I need to apply to the screen to open an image preview?................................................. 35
2.16.7 Why can't I view a preview when Image zoom is enabled? ................................................................................................... 35
2.16.8 Why can't I scroll down on the screen when previewing an image? ....................................................................................... 35
2.16.9 How can I adjust the pressure that I need to apply to the screen to access to magnifying glass? ........................................... 35
2.16.10 How much can I zoom in on an image? ................................................................................................................................ 36
2.16.11 Why can't I use the magnifying glass for video thumbnails? ................................................................................................ 36
2.16.12 Why can't I access the magnifying glass on an image when Image zoom is enabled? ......................................................... 36
2.16.13 What is the layout of the navigation controls used for pressure sensing? ............................................................................. 36
2.16.14 What do the pressure sensing animations mean in the navigation bar? ................................................................................ 37
2.16.15 How can I ensure that my phone accurately registers my pressure touch on the navigation bar? ........................................ 38
2.16.16 How do I enable pressure sensing for the navigation bar? .................................................................................................... 38
2.16.17 How can I change the pressure sensitivity settings for the navigation bar? .......................................................................... 40
2.17 Weather ...................................................................................................................................................................................... 42
2.17.1 Do weather vibration alerts work with third-party weather apps? .......................................................................................... 42
2.17.2 Why aren't there any vibration alerts when I open the Huawei default weather app? ............................................................ 42
2.17.3 Why doesn't my phone vibrate when I select a contact in my phonebook? ............................................................................ 42
2.17.4 Why doesn't my phone vibrate when I select "previous station" or "next station" in the FM radio? ...................................... 42
2.17.5 When I receive an incoming call, why doesn't my phone vibrate in time with the ringtone for downloaded ringtones? ....... 42
2.17.6 When I receive an incoming call, why aren't there any special vibration effects when my phone is in silent mode? ............ 42
3 Security and payment ............................................................................................................................... 43
3.1 Does my phone support NFC? ..................................................................................................................................................... 43
3.2 Why does my NFC SIM card often fail to be detected when I swipe my phone? ....................................................................... 43
3.3 How do I select an NFC payment method? ................................................................................................................................. 43
3.4 Which card slots support NFC? ................................................................................................................................................... 44
September 2015
INTERNAL
6
3.5 What is fingerprint identification? ............................................................................................................................................... 44
3.6 How do I configure Touch control? ............................................................................................................................................. 44
3.7 Why can't I answer calls using my fingerprint? ........................................................................................................................... 45
3.8 Why can't I answer calls, take photos, or stop alarms using my fingerprint? .............................................................................. 45
3.9 How do I unlock the screen using my fingerprint? ...................................................................................................................... 45
3.10 Why do I need to set a password before I add a fingerprint? ..................................................................................................... 45
3.11 How do I access the safe using my fingerprint? ........................................................................................................................ 45
3.12 How do I access the app lock using my fingerprint? ................................................................................................................. 45
3.13 How do I use my fingerprint for my Huawei ID? ...................................................................................................................... 46
3.14 How many fingerprints can I save? ........................................................................................................................................... 46
3.15 When I record a fingerprint, my phone displays a message saying the fingerprint already exists. However, this fingerprint is
clearly not in the fingerprint list. After I clean up the list, this problem persists. Why? .................................................................... 46
3.16 Why can I still turn the Unlock screen switch on/off when there are no fingerprints in the fingerprint list? ............................ 47
3.17 My phone vibrates when fingerprint unlock fails. Can I disable this feature? ........................................................................... 47
3.18 Is there any limit to the number of unsuccessful fingerprint unlocks? ...................................................................................... 47
3.19 How can I use my fingerprint to make a payment? ................................................................................................................... 47
3.20 Does Touch-disable mode apply to the fingerprint sensor? ....................................................................................................... 49
3.21 Why can't I use my fingerprint to authenticate a payment in Alipay? ....................................................................................... 50
3.22 Why can't I find the fingerprint settings in Alipay? ................................................................................................................... 50
3.23 Why can't I unlock my phone using my fingerprint? ................................................................................................................. 51
3.24 Why does the fingerprint unlock feature frequently fail to work properly? .............................................................................. 51
3.25 Why does it takes a long time to unlock the screen after my phone has been used for a certain period? .................................. 52
3.26 Why does my phone fail to read my fingerprint? ...................................................................................................................... 52
3.27 What can I do to successfully unlock the screen if my fingers are dry? .................................................................................... 52
3.28 What can I do to successfully unlock the screen if my fingers are wet or sweaty? ................................................................... 52
3.29 Why do people whose fingerprint patterns are shallow often fail to unlock the screen using the fingerprint? ......................... 53
3.30 Why does the fingerprint sensor often fail to recognize my fingerprint and respond slowly when I'm unlocking the screen? . 53
3.31 Why does my phone read my fingerprint slowly in winter or when the weather is dry? ........................................................... 53
3.32 Why can I unlock the screen using other fingerprints? .............................................................................................................. 53
3.33 Why can I only unlock my phone with my fingerprint after I restart it? ................................................................................... 54
3.34 Why can't I unlock the screen using my fingerprint? Why can't I find the fingerprint option under Settings? ......................... 54
3.35 Why can't I unlock the screen using my fingerprint when my phone is connected to another brand charger? .......................... 54
3.36 Why can I unlock my screen even if my finger is not perfectly aligned with the fingerprint sensor? ....................................... 54
3.37 Can anyone access my fingerprint information? ....................................................................................................................... 54
3.38 Why do I have to register my fingerprint several times and at different angles? ....................................................................... 55
3.39 Why doesn't my fingerprint register successfully? .................................................................................................................... 55
3.40 Why can't I use my fingerprint to unlock my phone when a third-party screen lock application starts? ................................... 55
3.41 Why can't I unlock my phone or register my fingerprint when I swipe my finger on the fingerprint sensor? ........................... 55
3.42 How do I unlock the screen when I am not able to use the fingerprint feature? ........................................................................ 56
3.43 How can I access file safe when I am not able to use the fingerprint feature? .......................................................................... 56
3.44 How do I access the App lock when I am not able to use the fingerprint feature? .................................................................... 56
3.45 How do I delete the fingerprints registered on my phone? ........................................................................................................ 56
September 2015
INTERNAL
7
3.46 How can I disable fingerprint unlock? ....................................................................................................................................... 56
3.47 What happens to my fingerprints when I restore factory settings? ............................................................................................ 57
3.48 How does consecutive fingerprint detection work? ................................................................................................................... 57
3.49 Will my fingerprints be deleted when I flash my phone? .......................................................................................................... 57
3.50 How can I use my fingerprint to answer a call? ......................................................................................................................... 57
3.51 Why can't I use the fingerprint sensor to access the notification panel when the screen is in landscape mode? ....................... 57
3.52 Why won't the fingerprint authentication feature in Alipay work properly? ............................................................................. 57
4 Screen and display .................................................................................................................................... 59
4.1 Why does the screen brightness change frequently? ................................................................................................................... 59
4.2 Why does the screen often crash and why does a yellow frame appear around the edge of the screen? ..................................... 60
4.3 Why doesn't the screen display colors properly? ......................................................................................................................... 60
4.4 Why does a red frame appear around the edge of the screen? ..................................................................................................... 61
4.5 Why do the colors look so bright? ............................................................................................................................................... 61
4.6 Why does the screen appear brighter in dark surroundings? ....................................................................................................... 61
4.7 How can I wake the screen using knuckle gestures? ................................................................................................................... 61
4.8 Why is the touchscreen slow to respond or why does the touchscreen not work properly? ........................................................ 62
4.9 Why does my screen look blue when the screen is off? .............................................................................................................. 62
4.10 My touchscreen isn't aligned with the controls when I'm playing games. ................................................................................. 62
5 Camera and multimedia........................................................................................................................... 64
5.1 Optical image stabilization (OIS) doesn't work well for large amounts of camera shake. Why? ................................................ 64
5.2 The rear camera is off-center. Why? ............................................................................................................................................ 64
6 Managing applications ............................................................................................................................. 65
6.1 Third-party apps .......................................................................................................................................................................... 65
6.1.1 Why does Pao Pao Long crash when I open it? ........................................................................................................................ 65
6.1.2 Why does Pop Star crash when I open it? ................................................................................................................................. 65
6.1.3 Why does Pin A crash when I open it? ..................................................................................................................................... 65
6.1.4 Why does Fishing Joy 2 crash when I open it? ......................................................................................................................... 65
6.1.5 Why do links posted in WeChat Moments fail to load? ............................................................................................................ 65
6.1.6 When I end an audio call in WeChat and play some music, why does the sound come from the earpiece, even when I remove
my TalkBand B2 earpiece from the wristband? ................................................................................................................................. 66
6.1.7 Why doesn't Alipay respond or why can't I log in? .................................................................................................................. 66
6.1.8 Why doesn't the ICBC app respond sometimes? ...................................................................................................................... 66
6.1.9 Why does the Didi driver app crash after logging in? .............................................................................................................. 66
6.1.10 Why does the Baidu app crash? .............................................................................................................................................. 66
6.1.11 Why does the Weibo app crash or fail to respond? ................................................................................................................. 66
7 Others .......................................................................................................................................................... 67
7.1 Product specifications .................................................................................................................................................................. 67
7.2 List of key components................................................................................................................. Error! Bookmark not defined.
7.3 List of pre-installed applications ................................................................................................................................................. 67
7.4 List of incompatible third-party applications ................................................................................ Error! Bookmark not defined.
September 2015
INTERNAL
8
7.5 List of compatible Bluetooth devices ........................................................................................... Error! Bookmark not defined.
7.6 Dual card slot specifications ........................................................................................................................................................ 67
7.7 List of compatible microSD cards ................................................................................................ Error! Bookmark not defined.
7.8 ROM and RAM allocation........................................................................................................................................................... 67
7.9 Phone at a glance ......................................................................................................................................................................... 70
September 2015
INTERNAL
9
1
Hardware and exterior
1.1 Why does my phone not recognize my SIM card?
1. Your SIM card may not be inserted correctly.
(i) Both SIM card slots on the Mate S only support nano-SIM cards. Please ensure you use a nano-SIM
card with your phone.
(ii) If you are currently using another type of SIM card, you should request a nano-SIM card from your
network operator. Cut SIM cards are not recommended as they may have damaged contacts or fail to fit
properly, which could lead to intermittent issues. The rough edges of a cut SIM card may also damage
your phone.
(iii) If you are using a nano-SIM card, please ensure it is inserted correctly, as shown below.
2. If your phone does not recognize your SIM card, or if recognition is intermittent, try following the
steps below:
(i) Verify that you are using a standard nano-SIM card. Standard nano-SIM cards have a ring of plastic
insulation around the metal chip. If one side of this ring is missing, your card has previously been cut.
September 2015
INTERNAL
10
(ii) If you are using a SIM card that has been cut to size, it is strongly recommended that you request a
standard nano-SIM card from your network operator. Cut SIM cards are not recommended as they may
have damaged contacts or fail to fit properly, which could lead to intermittent issues.
(iii) If you are using a SIM card that has been cut in store, it is recommended that you request a standard
nano-SIM card from your network operator. Cut SIM cards are known to cause issues.
(iv) If you are using an old SIM card, you can try wiping the metal contacts with alcohol to remove
oxidation. If problems persist, you should request a new nano-SIM card from your network operator.
(v) If you are using a China Telecom SIM card, this is only compatible with the custom China Telecom
Mate S model (CRR-CL00/CL10). China Telecom SIM cards will not work with China Mobile or dual
4G SIM models.
(vi) If none of the above apply, please take your phone and SIM card to a service center.
Why must I use a standard nano-SIM card?
The Mate S phone is designed to accept standard nano-SIM cards only. This is to prevent damage from
the insertion of badly-cut SIM cards.
1.2 Manufacturing issues
1.2.1 Why is there a gap between the screen and bezel? Why is the gap
uneven?
1. Due to material and manufacturing limitations, it is impossible to eliminate such gaps or make them
perfectly even.
2. The gap between the screen and bezel conforms to industry quality standards (a gap no larger than 0.3
mm). Huawei phone housings exceed industry standards.
3. Try to insert two sheets of A4 paper (each 0.1 mm thick) into the gap to determine how wide it is.
If you are unable to insert both sheets, the gap is less than 0.2 mm wide, which meets standards. If both
sheets can be inserted into the gap, please take your phone to a Huawei service center.
1.2.2 Why does the camera flash catch on my hand?
The camera flash is slightly recessed to prevent it from catching and causing injury. Please note that this
does not affect performance.
Note: If the user asks for a replacement, please inform them that this issue is not covered by the
warranty.
September 2015
INTERNAL
11
1.2.3 Why does the fingerprint reader catch on my hand?
The fingerprint reader is slightly recessed and has rounded corners to prevent it from catching and
causing injury. Please note that this does not affect performance.
warranty except when the product is new, out of the original packaging.
1.2.4 Why are the plastic antenna cutouts not flush with the rear cover?
The Mate S is made using the same processes as the iPhone 6. During manufacturing, nonuniform
polishing of metal and plastic parts can produce a slightly uneven finish. Please note that this does not
affect performance.
warranty.
1.2.5 Why are there three faint marks either side of the earpiece on the
Gold Mate S?
In order to combine functionality and looks, the front indicator light, camera flash and ambient light
sensor are covered with a translucent coating. Please note that this does not affect performance.
Note: If the user requests a replacement phone, please inform them that this issue is not covered by the
warranty.
1.2.6 Why do the power key and volume key protrude by different
lengths from the phone?
The power and volume keys are moving parts and are subject to manufacturing limitations. This means
they are not entirely uniform. This issue is not considered a fault unless performance is affected.
September 2015
INTERNAL
12
warranty if it does not affect performance.
1.2.7 The paint has rubbed off my black/purple phone, leaving white
marks visible. Why?
1. All phones are checked thoroughly for cosmetic defects before they are shipped.
2. Paint near micro-USB connectors, headset sockets, SIM card trays and pin holes is susceptible to
scraping. Paint on the phone's rear housing can be rubbed off when the phone is placed on a table or in
pockets.
3. The above issues are common to all dark-colored metal phone housings and are not considered faults
unless they affect the functioning of the phone.
warranty.
1.2.8 The rear cover on the phone bends when pressed. Why?
The thickness of phone batteries varies with charge. By design, there is a safety gap between the battery
and rear cover. If the rear cover is pressed, there will be some movement, but this is entirely normal.
Please rest assured that all Huawei phones must pass strict quality checks before they are shipped.
warranty.
1.2.9 The tempered glass screen protector has an uneven surface. Why?
Screens are rigorously checked for defects before shipping. The phone features a Corning Gorilla Glass
3 screen which is highly scratch-resistant and can withstand ordinary scrapes and knocks. Additional
screen protectors are not required.
If users insist on using a tempered glass screen protector, it is recommended that they purchase the
official Huawei super-thin (0.2 mm thick) tempered glass screen protector on Vmall.
If the issue persists, users should take their phone to a Huawei service center where the official Huawei
protector can be applied by a technician.
warranty if it does not affect performance.
(Below is the method used by service center technicians to apply screen protectors. Telephone and
online support staff should ignore this section.)
Service center application method:
If the surface of the 0.2 mm super-thin tempered glass screen protector is uneven, technicians should
assist users as follows:
Loosen the two screws located at the bottom of both sides of the phone.
Squeeze out any air bubbles beneath the tempered glass screen protector.
Replace the two old screws with new ones and tighten.
Note: Service centers should keep T2 screwdriver bits for the aforementioned screws. T3 bits should
also be kept in case screws are damaged during removal, in which case T3 bits should be used.
September 2015
INTERNAL
13
1.2.10 After some use, the phone's front and rear housing have dents.
Why?
1. Huawei phones comply with industry quality standards and are checked rigorously before they are
shipped.
2. The rear housing is made of aluminum alloy, which can be dented by hard impacts. It is
recommended that you use a protective phone case.
warranty.
1.2.11 The rear camera lens cover is cracked or scratched. Why?
1. All lenses are rigorously checked for defects before shipping. Lens covers are made with sapphire
glass which is scratch-resistant and can cope with ordinary scrapes and knocks. However, lens covers
may crack or become scratched if struck by sharp, hard objects.
2. Users should use a protective case and keep their phone away from sharp or abrasive objects such as
keys or grit.
3. In principle, the user is responsible for any post-sales damage caused to the rear lens cover. Such
damage cannot be repaired under the warranty, but the camera lens can be replaced outside the warranty.
warranty.
1.2.12 Why is the rear flash cover recessed?
The camera flash is slightly recessed to prevent it from catching and causing injury.
warranty.
1.2.13 Why is there a gap between the rear housing and the phone keys
or SIM card tray? Why is the gap so wide or uneven?
1. The SIM card tray and keys are moving parts and are subject to material and manufacturing
limitations. It is impossible to eliminate such gaps or make them perfectly even.
2. The gap conforms with industry quality standards (a gap no larger than 0.3 mm). Huawei phone
housings exceed industry standards.
1.2.14 Why is there a gap between the rear housing and the flash cover?
Why is the gap so wide or uneven?
perfectly even.
September 2015
INTERNAL
14
1.2.15 Why is there a gap between the front and rear housing? Why is
the gap so wide or uneven?
perfectly even.
September 2015
INTERNAL
15
2
System features and settings
2.1 How do I use smart unlock?
Smart unlock makes unlocking your phone a breeze. Simply bring your Bluetooth device within range
of your phone and press the power key to unlock. No password is required.
To use smart unlock, you will need a supported Huawei phone and a Bluetooth-enabled device, such as
a headset or wristband. The steps for enabling smart unlock with a Bluetooth headset are as follows:
1. Open Settings and select Screen lock & passwords. Select Password and enter a password (skip
this step if you already have a password).
2. Open Settings and select Screen lock & passwords. Select Smart unlock, as shown below:
3. Enter your screen unlock password to enter the smart unlock settings screen. Connect your Bluetooth
device as shown below:
September 2015
INTERNAL
16
4. Select Add a Bluetooth device, enable Smart unlock and then select the Bluetooth device you
connected during Step 3 as shown below:
5. Once configured, you can unlock your phone using a Bluetooth device when it is in range.
Note: When more than one Bluetooth device is connected to your phone, all devices can use the smart
unlock feature.
September 2015
INTERNAL
17
2.2 How do I enable gray display mode?
Open Settings and select Accessibility then enable the Gray display feature, as shown below:
Once enabled, your phone will switch from a color interface to a black and white interface as shown
below:
Note: If the interface on your phone changes from color to black and white, it may be because you have
accidentally enabled gray display mode.
September 2015
INTERNAL
18
2.3 What is multi-window mode and how do I enable it?
Multi-window mode is also known as multi-screen mode. It allows you to run multiple apps
concurrently on your phone. Currently, Huawei phones are able to display two screens at a time. Not all
apps support this feature. Select Add to see a list of compatible apps.
How to enable multi-screen mode:
First enable Multi-screen from the drop-down shortcuts screen. Return to the home screen then touch
and hold Recent to enter multi-screen mode.
Note: You can touch the Back key, Home key or Recent key to exit multi-screen mode.
2.4 What is encrypted SMS?
Encrypted SMS is a highly secure, encrypted messaging service. When encrypted SMS is used,
messages are encrypted on the sender's phone before being sent. Recipients must decrypt messages
using their Huawei ID password before they can be read. This makes SMS messages much more secure.
Messages are stored on servers in an encrypted form or are kept in the phone's secure storage module.
In order to use encrypted SMS, both the sender and the recipient must use supported Huawei phones
with the encrypted SMS feature enabled. To enable encrypted SMS, you must associate your phone
number with a Huawei ID. A number can only be associated with one ID. An ID can be associated with
more than one number. When you change your phone or SIM card, this account association will not be
affected provided you retain your old number.
2.4.1 How do I activate encrypted SMS?
First ensure you have a working data or Wi-Fi connection. Open the Menu beneath the message list and
select Settings and then Attach signature to open the encrypted SMS menu. Enable the switch for the
SIM card you wish to use and then follow the instructions to activate the encrypted SMS feature.
September 2015
INTERNAL
19
2.4.2 Encrypted SMS activation failed. Why?
1. Your phone needs to send SMS messages to activate this feature. Please check that you have
sufficient calling credit.
2. Please ensure you have good phone reception when trying to activate the encrypted SMS feature.
2.4.3 When I send an encrypted message, the recipient only sees garbled
text. Why?
If the recipient's phone does not support the Huawei encrypted SMS feature, please use ordinary SMS.
2.4.4 I am unable to view encrypted messages. Why?
Ensure that the SIM card used to receive messages is inserted and then try again.
2.4.5 Nothing happens when I select an encrypted SMS. Why?
Users of phones produced by other manufacturers may be accustomed to opening encrypted messages
with a single touch. On Huawei phones, users should open encrypted messages with a quick double
touch.
To open an encrypted message, users must touch the text inside the message dialog box, as shown below.
If users only touch the edge of the box, the encrypted message will not be opened. If users report that
they are unable to open encrypted messages, please check that they have touched the text inside the box.
September 2015
INTERNAL
20
2.4.6 The remaining characters counter to the right of the compose
window is inaccurate. Why?
The number of characters you type may not match the decrease shown by the remaining characters
counter. This is because the total character count for a message may change after it is encrypted. The
counter on the right shows the number of characters remaining after the message has been encrypted.
2.4.7 Why are some messages still garbled even after I decrypt them
with my password?
A password for one Huawei ID cannot be used to decrypt messages retrieved with a different Huawei ID.
If you have used different Huawei IDs to retrieve encrypted messages during one session, you will not
be able to use one Huawei ID password to decrypt all of them. For example: After retrieving an
encrypted message using phone number XXX, you may change the SIM card (and associated Huawei
ID) and retrieve another encrypted message using phone number YYY. When you open the message list
and select an encrypted message, you will be prompted to enter your Huawei ID password. This
password will only decrypt messages that were downloaded with the corresponding Huawei ID.
2.4.8 Why can't I copy or forward encrypted messages?
Encrypted messages are sent, received and stored in an encrypted form. Recipients must decrypt
messages using their Huawei ID password before they can be read. This makes SMS messages much
more secure. Even if an encrypted message is copied or forwarded to another recipient, they will be
unable to decrypt its contents. Therefore, in the interest of security, encrypted messages can only be
viewed by you and cannot be copied or forwarded.
2.4.9 Why can't I always use my fingerprint to decrypt messages?
To use fingerprint decryption, the following conditions must be met:
1. The Huawei ID used to receive the message must match the ID of the current SIM card.
2. The Huawei ID associated with the encrypted SMS feature must also have an associated fingerprint.
2.4.10 How do I back up and restore encrypted messages?
For security reasons, when the user syncs encrypted messages to the cloud, they will be stored in an
encrypted format on the remote server. Only the user who backed up the encrypted messages may
download and decrypt them. To use the backup and restore feature, you must use a Huawei phone that
supports encrypted SMS. The same Huawei ID must be used both to back up and restore. The user can
use the backup feature to back up encrypted messages to their Huawei Cloud Drive. For security
reasons, these will be stored on the remote server in encrypted form. Backed up messages can only be
restored with the Huawei ID that was used to perform the backup. Users must log in using this ID on a
Huawei phone that supports encrypted SMS and recover their messages. These can then be decrypted
and viewed.
2.5 What is native 24-bit decoding?
24-bit audio offers higher resolution audio playback. All audio output on the Mate S's HiSilicon Kirin
935 chip is 24-bit.
September 2015
INTERNAL
21
Native decoding allows audio files to be decoded and played by your phone's digital signal processor
(DSP), which currently supports MP3 and WAV files. This setup is called low-power audio playback
and allows your phone to consume very little power while playing music.
Low-power audio playback limitations:
MP3: Low-power playback is supported for non-VBR, stereo MP3 files (videos not included) played
through the earpiece, loudspeaker or a wired headset. MP3 files must be stored locally and have a
duration of more than one minute (internet streams are not supported). Playback is not supported if
other music players are using low-power playback mode or if there is an active phone call, internet call
or VOIP call. The music player must be configured to play only audio files.
WAV: Low-power playback is supported for stereo WAV files (videos not included) played through the
earpiece, loudspeaker or a wired headset. WAV files must be stored locally and have a duration of more
than one minute (internet streams are not supported). Playback is not supported if other music players
are using low-power playback mode or if there is an active phone call, internet call or VOIP call. The
music player must be configured to play only audio files.
2.5.1 If I need to achieve a signal-to-noise ratio (SNR) of 110 dB, what
sort of test file should I use?
You should perform the test with a 24-bit WAV file.
2.5.2 When listening to music, how do I activate low-power audio
playback to prolong battery life?
Please refer to the above limitations for guidance on using low-power audio playback.
2.6 How can I print from my phone?
Check that your printer supports the Mopria Print Service. You will not be able to the use the print
feature if your printer does not support the Mopria Print Service, therefore be sure to check with your
printer retailer before purchasing to ensure that you choose the correct model.
Once you have confirmed that your printer supports the Mopria Print Service, you need to establish the
connection with your printer. The connection is made using the default Mopria printing protocol. We
recommend using the connection method outlined in (i) below for faster printing speeds and a better
user experience.
(i) Connect your phone directly to your printer.
Turn the printer on, then enable the printer's Wi-Fi hotspot and configure the hotspot password, or use
the default password.
Enable Wi-Fi on your phone and connect to your printer's Wi-Fi hotspot.
(ii) Connect to your printer via your wireless router.
Turn the printer on, then enable Wi-Fi and connect your printer to the wireless router.
Enable Wi-Fi on your phone and connect to your wireless router.
(iii) Check that the connection was established properly.
September 2015
INTERNAL
22
After completing steps (i)/(ii) and (iii), go to Settings > Print > Mopria Print Service on your phone
and enable the service (it should be enabled by default). A list of currently available printers will be
displayed automatically.
When printing photos, ensure that the size of your photo paper is compatible with your printer.
2.6.1 Why can't I find my printer on my phone?
1. Check that your printer supports the Mopria Print Service.
2. Check that the connection between your printer and your phone was configured correctly.
2.6.2 Can I use long-edge or short-edge binding to print double-sided
photos?
When you select long-edge or short-edge binding, the media type will automatically change to
Document.
2.6.3 I am using an Epson L455. Why don't my photos print properly?
This printer model is not yet fully compatible with your phone. We have already informed the
manufacturer to resolve the issue.
2.7 Directional recording
2.7.1 How can I add text or photos to audio recordings?
When recording, you can add a tag or take a photo to add to your recording. When you play back your
recording, you can edit or add tags so that you can easily skip to the desired location.
September 2015
INTERNAL
23
2.7.2 What is directional recording?
You can record in three different modes. The Meeting and Interview modes use three microphones to
record sound from different directions. The direction of the sound is displayed on your phone during
recording and playback. The Normal mode replaces the Concert mode on previous models and uses a
sampling rate of 48 kHz.
Mode
Number
of
microphones
Sampling rate
Displays
direction during
recording
Displays
direction
during
playback
Directional
noise
reduction
Meeting
3
16 kHz
Y
Y
Y
Interview
3
16 kHz
Y
Y
Y
Normal
2
48K
N
N
N

Meeting mode
Use this mode when holding meetings around a table. Your phone will automatically detect the direction
of the loudest sound, and the phone can be configured to only record sound from that direction. When
recording, keep the 3 microphones level with the meeting participants to ensure that the directionality
feature works properly.
The phone will record sound from a maximum of eight directions. You can choose to play back sound
from a specified direction.
September 2015
INTERNAL
24

Interview mode
In Interview mode, the phone only records sound from two directions and filters out all other sound.
This mode is designed for face-to-face conversations such as interviews. When recording, keep the 3
microphones level with you to ensure that the directionality feature works properly.

Normal mode
This mode uses a sampling rate of 48 kHz and is designed for everyday voice/music recordings.
September 2015
INTERNAL
25
2.8 What are the features of the Pro camera mode?
The Pro camera mode is new to the Mate S. It enables you to customize a selection of parameters and
preview the results before taking a photo. This mode is ideal for photography enthusiasts who require
enhanced functionality.
2.9 How do I enable the Pro camera mode?
Launch the Camera app to access the viewfinder. Touch the menu icon in the top-right corner and then
select Pro camera.
2.10 How can I view the properties of an image?
Following the launch of EMUI 3.1, the option to view image properties is no longer located in the
Gallery menu. To view the properties of an image, simply touch the "i" symbol when viewing an image.
The file name, location, camera parameters and other image properties will be displayed.
2.11 Why doesn't the screen turn off when I place my phone
next to my ear during a call?
Ensure that your ear covers the proximity sensor. The screen will only turn off when the proximity
sensor is covered. Keeping the earpiece level with your ear should resolve this issue. If the earpiece is
not next to or level with your ear during a call and you do not touch the display, the screen will turn off
automatically after a short period. Press the power key to turn the display back on.
September 2015
INTERNAL
26
2.12 There is condensation on my screen. Why does the screen
turn off during a call when the proximity sensor is not covered?
If there is condensation on the proximity sensor, the proximity sensor will be activated and the screen
will turn off. Wipe any condensation off the proximity sensor to resolve the issue.
2.13 There is condensation on my screen. Why doesn't the
touchscreen work?
If you have enabled Touch-disable mode and there is condensation on your screen, you will not be able
to use the touchscreen. Wipe off the condensation on your screen to exit Touch-disable mode.
2.14 Smart screenshot
2.14.1 What is smart screenshot?
Smart screenshot is brand-new touch technology jointly developed by Huawei and Qeexo. This
technology can distinguish touch operations by fingers or knuckles. Your phone includes this technology.
You can double-touch any screen using your knuckles to achieve instant screenshot, which improves
screenshot efficiency.
You can also draw a circle on the screen using your knuckle to partially capture the screen. For example,
to share a part of a WeChat record, circle the content using your knuckle to share it with others.
2.14.2 Are there any differences between screenshot using knuckles or
composite buttons?
No.
2.14.3 Why does my phone suddenly take a screenshot when I use it
normally?
Your phone takes a screenshot based on the instructions from your knuckles by detecting the screen
touch capacity and gravity sensor signals. The probability of triggering the screenshot with fingers by
mistake during normal use is extremely low. You may occasionally trigger screenshot if you
continuously knock the screen hard with your nails. Make sure you use the phone normally, and do not
knock the screen hard with your nails.
2.14.4 How do I partially capture the screen?
On any screen, use the knuckle of any finger (such as the thumb or index finger) to touch the screen a
little harder, and then draw a closed pattern without leaving the screen. After your phone successfully
identifies the knuckle, it generates a blue track that moves along your knuckle's path.
September 2015
INTERNAL
27
*For reference purposes only. Your phone's interface may differ from the interface shown in this image.
2.14.5 Why can't I draw a track and partially capture a screenshot using
my knuckle?
Your phone implements partial screenshot based on the gravity sensor signals. If you only lightly draw a
circle on the screen, even when you use your knuckle, your phone can't receive the signals. Rapidly
draw a circle on the screen a little harder to achieve partial screenshot. Practice several times to master
this operation.
2.14.6 How do I disable the Smart screenshots feature?
Go to Settings > Motion control > Smart screenshots/Screen recording and turn off the switch.
2.14.7 Why do I fail to partially capture the screen even if I draw a
circle?
Successful screenshot using your knuckles depends on whether the circle is closed and whether any
lines are crossed. If you draw a rectangle or a circle, screenshot is successful in most cases. However, if
the shapes vary greatly from the algorithms, for example, 6, C, 8, and W, screenshot fails. Screenshot
can be successful if an irregular polygon is closed, for example, a heptagon or a starfish. Practice more
to master this operation.
2.14.8 Does smart screenshot affect the phone's standby time?
The algorithm for identifying the knuckles is integrated on the hardware drive and consumes very little
current. Therefore, it doesn't affect the standby time.
September 2015
INTERNAL
28
2.14.9 How do I share the screenshot using the smart screenshot
function?

For a full screen, touch Share and select a sharing mode.

For a partial screen, touch
and select a sharing mode.
2.14.10 How do I save or cancel the screenshot using the smart
screenshot function?

For a full screen, it is automatically saved.

For a partial screen, touch
upper left corner to cancel it.
in the upper right corner to save it or
in the
2.14.11 How do I edit the partially captured screen using the smart
screenshot function?
After you partially capture a screen, you can touch

: adjust the size of the picture

: fuzzy process the part you don't want to share

September 2015
to edit the picture:
: remove the added mosaic
INTERNAL
29
2.14.12 Why can't I slide to answer an incoming call and why is there a
light blue screenshot track on the screen?
You may have accidentally triggered the smart screenshot function. Go to Settings > Motion control >
Smart screenshots/screen recording.
2.14.13 How can I avoid accidentally triggering the smart screenshot
function?
Smart screenshot is easily triggered when:

Your phone is set to vibrate when calls come in.

Music is played in speaker mode.

The alarm goes off in vibrate mode.

The video is played in speaker mode.
If your phone vibrates when a call comes in or the alarm goes off, go to Settings > Sound and disable
Vibration feedback or go to Settings > Motion control > Smart screenshots/smart recording and
turn off smart screenshot.
If music or video is played in speaker mode, turn off smart screenshot.
2.14.14 Why is there a light blue screenshot track when I perform
operations on the screen?
You may have accidentally triggered the smart screenshot function. Turn off smart screenshot or avoid
touching the screen too hard.
September 2015
INTERNAL
30
2.14.15 Why can't I take consecutive multiple smart screenshots?
After you take a smart screenshot, it needs to be processed in the background, which takes about 2
seconds. After the screenshot image automatically disappears, you can take another smart screenshot.
2.14.16 How can I capture square-shaped, circular, or heart-shaped
screenshots?
By default, the Smart screenshots feature will capture screenshots in the shape that you draw on the
screen. Select one of the four icons in the top-right corner to change the screenshot shape. You can
choose from square, circular or heart-shaped screenshots (as shown in the image below).
2.14.17 How do I enable the Knuckle Control feature?
Go to Settings > Motion control > Draw, enable Draw and draw a letter to launch a predefined app (c,
w, m or e). You can configure which letters correspond to which apps in the Draw settings.
2.15 Screen recording
2.15.1 How do I start and end a screen recording?
To start a screen recording, double touch on the screen with two knuckles, press the volume up key and
power key simultaneously, or touch the Screen recording switch in the shortcut panel (accessible by
swiping down from the notification bar).
To end a screen recording, double touch on the screen with two knuckles, press the volume up key and
power key simultaneously, or touch the Screen recording switch in the shortcut panel and then touch
the Stop button.
September 2015
INTERNAL
31
2.15.2 When I am using the Mini mode for screen recording, why does
the recording consist of several files, each of around 10 MB?
The Mini mode is designed to make it easier for users to share screen recordings quickly using instant
messaging apps such as WeChat. Instant messaging apps place restrictions on the size of video files that
can be sent to friends, e.g. WeChat, which does not allow files larger than 20 MB. Any videos larger
than the app's limit will be compressed by the app, which significantly decreases the video resolution.
Mini mode provides a solution to this issue by creating a new video file each time a recording file
reaches a certain size (e.g. 19 to 20 MB).
Due to the file size restrictions of many popular instant messaging apps, the size of each video file in
Mini mode is 15 to 16 MB for models purchased outside of China.
2.15.3 Why is the resolution poor when using Mini mode for screen
recording?
As described in section 2.15.2 "When I am using the Mini mode for screen recording, why does the
recording consist of several files, each of around 10 MB?", the Mini mode is designed to record videos
that can be sent using instant messaging apps. The size of each video file is restricted to prevent instant
messaging apps from compressing the video. If the resolution is set to high, a 19 to 20 MB file will only
record a very short clip.
If the resolution is set to high and there are no file size restrictions, the resolution will decrease
significantly when the video is sent using an instant messaging app, as the app will compress the video
to a lower resolution.
We therefore opted for FWVGA resolution for clips recorded in Mini mode in order to keep the file size
low and ensure an acceptable image quality.
You can also record a screen recording using HD mode and then share your clip by uploading it onto a
video-sharing website.
2.15.4 Why can't I record a video, make a voice recording, or send voice
messages when I am using the screen recording feature?
Your voice is recorded automatically when you make a screen recording. Starting a screen recording
will turn on your phone's microphone. Android does not currently support the use of the microphone by
more than one app at once. This means that you cannot record video, make a voice recording, send
voice messages, or use other apps that require the use of the microphone when you are using the screen
recording feature. Turn off screen recording if you wish to access these features.
2.15.5 Where are screen recording files stored? Why does my phone say
that there is insufficient storage space when I still have space
remaining on my microSD card (or internal storage)?
Screen recording files are saved in the system's default storage location. You can change the default
storage location by going to Settings > Device > Storage > Default storage.
2.15.6 Why does the screen recording end automatically?
The screen recording will end automatically in the following circumstances:

September 2015
After 5 minutes of recording
INTERNAL
32
Just like video recording, the screen recording feature involves processes such as audio and video
encoding, which increase battery consumption. In addition, screen recording files also take up space on
your phone's internal memory. A 5-minute screen recording is normally sufficient for most users. In
order to avoid excessive battery consumption/large file sizes, the maximum screen recording time is
restricted to 5 minutes.

When you make/receive calls
The screen recording feature will record your voice. In order to prevent any confidential information
that you discuss during a call from being inadvertently disclosed when you share your screen recording
online, your phone will automatically stop and then save your screen recording when you make/receive
a call.

When there is insufficient storage space
When you have insufficient storage space (less than 50 MB), many of your phone's features may be
restricted by the system and your phone may slow down significantly. The screen recording will stop
automatically in order to prevent your phone from slowing down further and ensure that basic features
(e.g. calling) continue to function properly.

When the screen goes off due to inactivity or pressing the power key.
Screen recordings will end automatically when the screen goes off to reduce power consumption.

When your phone switches to Ultra power saving mode
Ultra power saving mode is designed to be used when the battery level is low. In ultra power saving
mode, you can only use your phone's basic features such as calling/messaging. All other features will be
disabled. When this mode is enabled, your screen recording will be stopped and saved automatically.
2.15.7 I always need to wait for the timer to countdown before the
screen recording starts. Is there a quicker way to start a screen
recording?
Touch the timer to skip the countdown and start recording immediately.
2.15.8 The screen recording timer button is obstructing the controls in
my game. What can I do?
You can drag the timer button to another location on the screen.
2.15.9 My screen recording failed to be shared over WeChat?
Check that you followed the correct steps to share your video. We recommend that you touch the Share
button, which you can find in the Gallery or by swiping down on the notification bar. Select WeChat to
share your screen recording with your friends.
If you use the "+" icon in WeChat to select your screen recording, WeChat will compress your video. If
compression fails, your recording will not be sent. Even if your recording is sent, the resolution will
decrease significantly due to compression. We therefore recommend that you do not use this method to
send your videos in WeChat.
September 2015
INTERNAL
33
2.15.10 Motion control often fails to work properly when
starting/stopping a screen recording. Why?
Check that motion control is enabled for screen recording by going to Settings > Motion control >
Smart screenshots/screen recording.
Your phone's gravity sensor must register your knuckle gesture in order for the motion control feature to
work properly. If you only touch very lightly on the screen, the gravity sensor will not register your
gesture. Try touching slightly harder on the screen (similar to how you would knock on a door). Practice
touching twice on the screen with two knuckles to start/stop screen recordings.
2.15.11 Why can't I play screen recordings in full-screen mode on my
phone (or my friend's phone)?
Make sure that you are using your phone's default video player. Some online video players are unable to
detect the video orientation automatically, therefore you will not be able to play the video in full-screen
mode.
2.15.12 Why doesn't the virtual navigation bar work when I'm playing a
screen recording?
Check whether the virtual navigation bar is part of the screen recording. Your phone's video player will
automatically hide the virtual navigation bar during playback so that you can view your screen
recording in full-screen mode. This means that the virtual navigation bar you see on the screen is
actually part of the screen recording.
If you want to access the phone's navigation bar during playback, simply touch the center of the screen.
2.15.13 When sending screen recordings in WeChat, why does WeChat
need to compress the recording? Why does the resolution decrease?
WeChat restricts the size of video files that are shared with friends to a maximum of 20 MB.
When you record in HD mode, even a short recording is likely to exceed 20 MB, therefore WeChat will
compress the file before it is sent.
If you wish to share your screen recording using WeChat, we recommend that you select Mini mode to
make your recording. This mode will use a lower bit rate (compared with HD mode, the quality will
decrease slightly). In addition, the recording will be split into numerous files of no more than 19 to 20
MB each, enabling you to send each file in WeChat without the need to compress your recording.
2.16 Images
2.16.1 How can I preview a thumbnail?
Go to the timeline view in Gallery, double tap the timeline or pinch two fingers together to access the
month view, then apply pressure to a thumbnail to preview the image.
2.16.2 How much can I zoom in on an image preview?
The preview can be enlarged up to the size of thumbnails in the week view.
September 2015
INTERNAL
34
2.16.3 Why does the size of image previews vary? When I release my
finger, why doesn't the phone open the image?
When you touch an image, the size of the image preview will vary between the size of month view
thumbnails and week view thumbnails, depending on how much pressure you apply to the screen. When
the size of the preview reaches its maximum (i.e. the size of a thumbnail in the week view), release your
finger to open the image. If you release your finger before the preview reaches the maximum size, the
image will not open.
2.16.4 How can I disable the preview feature in the month view?
Go to Settings > Accessibility > Pressure sensing and then disable Image zoom.
2.16.5 Is the image preview feature in the month view still available
when pressure sensing is disabled?
On the Mate S Luxury model, thumbnails can be enlarged in the month view regardless of whether
pressure sensing is enabled. When pressure sensing is enabled, you can enlarge thumbnails by applying
pressure to the screen. When pressure sensing is disabled, you can enlarge thumbnails by holding down
on a thumbnail. On other models of the Mate S, you can hold down on a thumbnail in the month view to
select multiple images.
2.16.6 How can I adjust the pressure that I need to apply to the screen to
open an image preview?
Go to Settings > Accessibility > Pressure sensing > Pressure sensitivity.
2.16.7 Why can't I view a preview when Image zoom is enabled?
Please note the following requirements for opening an image preview from a thumbnail:
1. Your phone must support pressure sensing.
2. The Image zoom feature must be enabled.
3. The pressure you apply to the screen must be at least as large as the value you configured in the
pressure sensitivity settings.
4. The feature to quickly take a photo if you swipe down on the Gallery screen is not enabled or used.
5. You must be in the month view in Gallery.
2.16.8 Why can't I scroll down on the screen when previewing an
image?
This feature is not supported.
2.16.9 How can I adjust the pressure that I need to apply to the screen to
access to magnifying glass?
The pressure required to access the magnifying glass is fixed and cannot be changed. As using the
magnifying glass requires the user to keep applying pressure to the screen, and in order to avoid
September 2015
INTERNAL
35
discomfort, the amount of pressure required to activate the magnifying glass is smaller than the pressure
sensitivity in the Pressure Sensing settings.
2.16.10 How much can I zoom in on an image?
You can zoom in up to 10 times.
2.16.11 Why can't I use the magnifying glass for video thumbnails?
This feature is not supported. Likewise, you cannot zoom in on a video thumbnail by stretching two
fingers apart.
2.16.12 Why can't I access the magnifying glass on an image when
Image zoom is enabled?
Please note the following requirements for accessing the magnifying glass on an image:
1. Your phone must support pressure sensing.
2. The Image zoom feature must be enabled.
3. The pressure you apply to the screen must reach the required value.
4. You cannot use the magnifying glass for video files.
5. The image properties must not be open.
6. The image must be open and displayed in its original size (not zoomed in or out) and in the center of
the screen.
2.16.13 What is the layout of the navigation controls used for pressure
sensing?
If you choose to remove the navigation bar from the screen and use pressure sensing, the three
navigation keys are arranged in a 3:2:3 layout. The Home key is always in the center and occupies 2/8
of the screen. The position of the Back and Recent keys will change depending on the navigation bar
settings.
September 2015
INTERNAL
36
2.16.14 What do the pressure sensing animations mean in the
navigation bar?
When you press the area for the Home key, the following animation will be displayed:
When you press the area for the Back key, the following animation will be displayed:
When you press the area for the Recent key, the following animation will be displayed:
September 2015
INTERNAL
37
When your phone registers that you are applying pressure to the screen, you will see a circular
animation. This indicates that you need to apply more pressure. Once the pressure reaches the required
threshold, the animation will disappear, indicating that you successfully pressed the corresponding
navigation key.
2.16.15 How can I ensure that my phone accurately registers my
pressure touch on the navigation bar?
Try to reach the required pressure quickly to reduce the possibility of your phone incorrectly registering
your pressure touch.
2.16.16 How do I enable pressure sensing for the navigation bar?
To use pressure sensing for the navigation bar, you must first ensure that your phone supports this
feature (Luxury version only). Then go to your phone's settings and follow the steps below:
September 2015
1.
Tap Navigation bar and select a layout for your navigation bar.
2.
There are two ways to enable pressure sensing for the navigation bar. Turn on the "Replace
navigation bar" switch in the navigation bar, or alternatively go to Settings > Pressure sensing,
touch Replace navigation bar and then turn on the Replace navigation bar switch.
INTERNAL
38
3.
September 2015
Touch the arrow in the bottom left of the navigation bar to hide the navigation bar and use pressure
sensing.
INTERNAL
39
2.16.17 How can I change the pressure sensitivity settings for the
navigation bar?
September 2015
1.
Go to Settings, then touch Pressure sensing to access the pressure sensing settings.
2.
Touch Pressure sensitivity to access the pressure threshold settings.
3.
Apply different levels of pressure to the center of the circle until you find a level that you are
comfortable with.
INTERNAL
40
4.
September 2015
Adjust the pressure threshold by dragging the blue pin.
INTERNAL
41
2.17 Weather
2.17.1 Do weather vibration alerts work with third-party weather apps?
Weather vibration alerts are only supported by the Huawei default weather app.
2.17.2 Why aren't there any vibration alerts when I open the Huawei
default weather app?
Weather vibration alerts will only work when sound effects are enabled. Your phone will only vibrate
for four types of weather (thunderstorm, rain, wind and sandstorm). Your phone will vibrate and play
sound effects when you view the weather for a city (if the weather is one of the types listed above).
Sound effects only last for a few seconds and your phone will stop vibrating when the sound effects
finish.
2.17.3 Why doesn't my phone vibrate when I select a contact in my
phonebook?
Your phone will only vibrate when you swipe through the letters A-Z on the right-hand side and a new
letter is reached.
2.17.4 Why doesn't my phone vibrate when I select "previous station" or
"next station" in the FM radio?
When using the FM radio, your phone will only vibrate when you move the red dot along the slider to
adjust the frequency.
2.17.5 When I receive an incoming call, why doesn't my phone vibrate
in time with the ringtone for downloaded ringtones?
Your phone will only vibrate in time with the ringtone when you use one of the 16 preset ringtones. For
other ringtones, your phone will use the standard Android vibration settings.
2.17.6 When I receive an incoming call, why aren't there any special
vibration effects when my phone is in silent mode?
Special vibration effects are designed for each preset ringtone, so if your phone is in silent mode, your
phone cannot vibrate in time with the ringtone and will use the standard Android vibration settings.
September 2015
INTERNAL
42
3
Security and payment
3.1 Does my phone support NFC?
Yes.
3.2 Why does my NFC SIM card often fail to be detected when I
swipe my phone?
Check that your SIM card supports NFC-SWP.
Check that all switches are enabled under Settings > More > NFC and that SIM 1 is selected for NFC
payment.
Check that you have installed the carrier's payment app (such as those for China Mobile, China Telecom
and China Unicom) and that you have correctly configured the default payment card in the app's
settings.
The location of antenna in subway turnstiles may vary. When passing through a subway turnstile, try
swiping your phone in a different place if your NFC SIM card is not detected. When swiping your
phone on a bus, swipe your phone over the center of the card reader.
If you are using a China Mobile NFC SIM card at Shanghai Metro stations, please note that you can
only swipe your SIM card on turnstiles that feature a green China Mobile label.
If your SIM card is not detected, try using another card reader or POS terminal. If your card is detected,
this means that the first card reader/POS terminal is incompatible with your SIM card. Please inform us
of any compatibility issues so that we can continue to enhance the NFC feature.
If you cannot pass through a subway turnstile, you may not have exited the turnstile correctly after your
previous journey. If so, go to the information desk at the subway station for assistance.
3.3 How do I select an NFC payment method?
1. After you have installed some payment apps, an icon for each app will be displayed when you swipe
your phone to make a payment. Select the app that you wish to use to make the payment.
September 2015
INTERNAL
43
2. If you have not installed any apps, a link to an online help page will be displayed when you swipe
your phone to make a payment. Please note that this link may not work properly in China, as the
webpage is hosted on a Google server.
3.4 Which card slots support NFC?
The phone's internal SIM card slot supports NFC. Please insert your NFC-enabled SIM card into the
slot correctly.
3.5 What is fingerprint identification?
Fingerprint identification is a highlight of your phone. It enhances your phone's information security
and provides shortcut operations. When you power on your phone for the first time, follow the onscreen
instructions to configure fingerprint identification settings.
Fingerprint identification includes Touch control and Fingerprint ID.
Touch control: You can touch, touch and hold, and swipe on the fingerprint sensor to operate your phone
without entering your fingerprint. You can answer calls, take photos, record videos, stop alarms, open
the notification panel, or view photos using the fingerprint sensor.
Fingerprint ID: You can unlock the screen, access the safe, and access the app lock feature by entering
your fingerprint instead of the password. You can also use it on third-party applications that support
fingerprint identification. You need to enable the PIN unlock or mixed password unlock method for
fingerprint identification.
3.6 How do I configure Touch control?
Go to Settings > Fingerprint ID. Under Touch control, select the functions you want.
The take photos/videos, open notification panel, and view photos options are enabled by default. Other
options need to be enabled manually.
September 2015
INTERNAL
44
3.7 Why can't I answer calls using my fingerprint?
When there is an incoming call and you press the power key accidentally, if the screen doesn't turn on,
you can't answer the call using your fingerprint.
3.8 Why can't I answer calls, take photos, or stop alarms using
my fingerprint?
To answer calls, take photos, or stop alarms using your fingerprint, you need to touch and hold the
fingerprint sensor for at least 1 second.
3.9 How do I unlock the screen using my fingerprint?
Go to Settings > All > Privacy & passwords > Fingerprint ID > Fingerprint management. When
you access Fingerprint management for the first time, you need to create a screen-lock password.
Then follow the onscreen instructions to enroll your fingerprints. After your fingerprints are enrolled,
the fingerprint unlock feature is enabled automatically. You can also set it manually under Fingerprint
management.
3.10 Why do I need to set a password before I add a fingerprint?
For security reasons, you must set a password so that you will be able to unlock your phone if your
fingerprint is not recognized.
3.11 How do I access the safe using my fingerprint?
You can access the safe using your fingerprint and the password after Access safe is enabled.
Go to Settings > All > Privacy & passwords > Fingerprint ID > Fingerprint management and enter
the unlock password. You need to enter the password for the safe before enabling Access safe. If you
haven't created a safe, the screen to enable the safe will be displayed. You can create a safe and set a
password. After that you can enable Access safe.
Go to Files > Safe to access your safe.
3.12 How do I access the app lock using my fingerprint?
You can access the app lock using your fingerprint and the password after Access app lock is enabled.
Go to Settings > All > Privacy & passwords > Fingerprint ID > Fingerprint management and enter
the unlock password. You need to enter the password when enabling Access app lock. If you haven't
enabled the app lock, the screen to enable it will be displayed. You can create one and set a password.
After that you can enable Access app lock.
Go to Phone manager > App lock to select the applications you want to lock.
September 2015
INTERNAL
45
3.13 How do I use my fingerprint for my Huawei ID?
When you enable fingerprint recognition for your Huawei ID, you can use your fingerprint instead of
entering the password.
Go to Settings > All > Privacy & passwords > Fingerprint ID > Fingerprint management, enter
your unlock password and then turn on the Access Huawei ID switch. You will be prompted to enter the
password for your Huawei ID. If you are not logged into your Huawei ID, you will be directed to the
Huawei ID login page. After you have entered your user name and password you will be able to turn on
fingerprint recognition for your account.
3.14 How many fingerprints can I save?
You can save up to five fingerprint templates under Settings > Fingerprint ID > Fingerprint
management.
If you go to Settings > Security > Privacy protection and enable privacy protection, you can create a
fingerprint template for visitors. When you access the phone in visitor mode, you can save another five
fingerprint templates under Settings > Fingerprint ID > Fingerprint management. To check all the
fingerprint templates in both owner and visitor modes, go to Settings > Security > Privacy protection,
enter the password, and select Manage fingerprints.
When a finger touches the fingerprint sensor, the corresponding fingerprint template is highlighted in
the template list.
3.15 When I record a fingerprint, my phone displays a message
saying the fingerprint already exists. However, this fingerprint
is clearly not in the fingerprint list. After I clean up the list, this
problem persists. Why?
Check whether you have enabled privacy protection and associated it with fingerprint identification.
Visitor fingerprints configured under Privacy protection will not be displayed under Settings > All >
Privacy & passwords > Fingerprint ID > Fingerprint management > Fingerprint list. Even if
privacy protection is disabled, the system will not delete the visitor fingerprint data. For fingerprints
already recorded in visitor mode, when they're recorded again, your phone will display a message that
says the fingerprints already exist.
You need to delete visitor fingerprints manually. Go to Settings > Privacy & passwords > Security >
Privacy protection, enter the owner password for privacy protection (if privacy protection is disabled,
the system will ask you to create a password). On the privacy protection settings screen, touch
Fingerprint management > Visitor fingerprint and delete unwanted fingerprint templates (when a
finger touches the fingerprint sensor, the corresponding fingerprint template is highlighted in the
template list).
September 2015
INTERNAL
46
3.16 Why can I still turn the Unlock screen switch on/off when
there are no fingerprints in the fingerprint list?
Check whether you have enabled Privacy protection and added a visitor fingerprint. If the owner has not
added any fingerprints, a visitor fingerprint can still be added to unlock the screen and enter visitor
mode, therefore the screen lock switch can still be turned on/off.
To view the list of visitor fingerprints, go to Settings > Privacy & passwords > Security > Privacy
protection, then enter the screen unlock password and touch Manage fingerprints.
3.17 My phone vibrates when fingerprint unlock fails. Can I
disable this feature?
No. The vibration is a reminder to tell you your phone cannot be unlocked using fingerprint.
3.18 Is there any limit to the number of unsuccessful fingerprint
unlocks?
If your phone is locked with its screen on, your phone will vibrate when unsuccessful fingerprint unlock
occurs and display a message indicating that fingerprint unlock has failed. If fingerprint unlock fails
three times in a row, an onscreen keyboard will be displayed where you can unlock the screen using a
password. If fingerprint unlock fails six times in a row, a message indicating that you can try again 30s
later will be displayed. You can also enter a password to unlock the screen.
If your phone is locked with its screen off, the phone will vibrate but the screen will not be turned on
when unsuccessful fingerprint unlock occurs. You can try fingerprint unlock up to 30 times. If you still
fail to unlock the screen, the screen will be turned on and a message indicating that you can try again
30s later will be displayed. You can also enter a password on the onscreen keyboard to access your
phone.
3.19 How can I use my fingerprint to make a payment?
You can use your fingerprint to make a payment in WeChat. Once you have configured the settings, you
can choose to use your fingerprint to authenticate payments or top-up transactions.
To authenticate a WeChat payment using your fingerprint:
Launch WeChat, go to Me > Wallet, select Password Management from the menu in the top-right
corner and then touch Pay with Fingerprint. Once you have configured the settings, you can choose to
use your fingerprint to authenticate payments or top-up transactions.
To set up fingerprint recognition in Alipay:
1. Log into Alipay.
September 2015
INTERNAL
47
2. Go to Alipay > Wealth > Settings > Fingerprint.
3. Configure the fingerprint settings.
Turn on the fingerprint switch and then select Agree. You will receive an SMS verification code. Enter
the verification code, register your fingerprint and then enter your six-digit payment password. You will
be able to use your fingerprint instead of your payment password the next time you make a payment.
September 2015
INTERNAL
48
3.20 Does Touch-disable mode apply to the fingerprint sensor?
Touch-disable mode also applies to the fingerprint sensor by default and prevents misoperations on the
fingerprint sensor, for example, when placed in your pocket. Touch-disable mode from Settings >
Smart assistance > More is not available for the fingerprint identification module.
September 2015
INTERNAL
49
3.21 Why can't I use my fingerprint to authenticate a payment
in Alipay?
1. Check that you are using the latest version of Alipay (8.6 or above).
To check the version number, launch the Alipay app, then go to Wealth > Settings > About.
Alternatively, go to Settings> Manage apps, then go to the All tab and touch Alipay to view the app
information.
2. Launch the Alipay app, then go to Wealth > Settings > Fingerprint and check whether the
fingerprint switch is turned on. If a prompt such as "Please install (or update) fingerprint software first"
appears, touch OK. Your phone will download and install the necessary software in the background
(make sure that your phone is connected to the Internet). Once the necessary software has been installed,
follow the onscreen instructions to associate your fingerprint with your Alipay account.
(1) When authenticating a payment with your fingerprint, ensure that you use the same fingerprint that
you associated with your account. You can only use one fingerprint to authenticate an Alipay payment,
even if you have registered more than one fingerprint on your phone.
(2) If you delete the fingerprint that you associated with your Alipay account from your phone, you will
need to reassociate your fingerprint the next time you make a payment, even if you re-register the
fingerprint on your phone.
3.22 Why can't I find the fingerprint settings in Alipay?
1. Visit the official Alipay website and download the latest version of the Alipay app.
2. Go to Wealth > Settings > Fingerprint and configure the settings.
September 2015
INTERNAL
50
3.23 Why can't I unlock my phone using my fingerprint?
1. Go to Settings > Fingerprint ID and check whether you have enrolled your fingerprint.
2. If you have enrolled your fingerprint, go to Settings > Fingerprint ID > Fingerprint management
and check whether Unlock screen has been enabled.
3. Make sure you use the correct finger to unlock your phone. For example, if you have enrolled the
fingerprint of your index finger but use the middle finger to unlock your phone, your phone can't be
unlocked.
3.24 Why does the fingerprint unlock feature frequently fail to
work properly?
The fingerprint sensor on Huawei phones is designed to work at temperatures ranging from –20℃ to
+75℃. If the fingerprint sensor fails to recognize your fingerprint, this is usually due to the ambient
conditions.
This problem is normally observed during cold periods when the finger's skin is susceptible to peeling,
causing temporary changes in the shape of your fingerprint. In addition, the fingerprint sensor may also
not work properly late at night or when you wake up in the morning due to changes in the depth of
fingerprint ridges caused by dry fingers and slow circulation.
1. Check whether the skin on your finger is dry, peeling or damaged.
The fingerprint sensor is designed to work at temperatures ranging from –20℃ to +75℃.
Solutions:
Use another finger.
Use skincare products to keep your skin moist and prevent it from peeling or cracking.
If you are suffering from dry skin, exercising or using warm water to wash your hands can help relieve
the problem.
2. Check whether the surface of the fingerprint sensor is dirty. Clean it if necessary.
3. If the fingerprint sensor is still not working properly, check whether your phone vibrates when you
use the sensor. If so, this means your phone did not recognize your fingerprint and the screen was not
unlocked.
Solutions:
Try to cover the whole of the fingerprint sensor with your fingertip.
You can record six images for each fingerprint - two for the center of each fingerprint (the most
commonly used part) and four for the surrounding areas. The greater the surface area you record, the
greater the accuracy of the fingerprint sensor. Try registering your fingerprint again following the steps
above. When registering your fingerprint, avoid using the same area of your finger for each of the six
images.
September 2015
INTERNAL
51
3.25 Why does it takes a long time to unlock the screen after my
phone has been used for a certain period?
1. Your fingers may become dry in autumn and winter. In this case, you can press your finger against the
fingerprint sensor more strongly and keep your finger moderately humid by blowing hot air on it or
washing it.
2. Blood circulation slows when you sleep and the fingerprint pattern gets shallower. Even though the
fingerprint characteristics remain unchanged, it may feel smoother. In this case, you need to press
harder.
3. The working temperature of the fingerprint sensor is from –20°C to +75°C.
3.26 Why does my phone fail to read my fingerprint?
1. Your phone may fail to read your fingerprint if your finger is too dry, sweaty, wet, or is damaged.
Wipe your finger and try again. If your fingers are dry, you may need to press your finger against the
sensor more strongly.
2. You can try enrolling your fingerprint again. While you are enrolling your fingerprint, use the gesture
you often use, enroll as many fingerprint areas as possible, and avoid enrolling the same area of your
fingerprint, so the enrolled fingerprint image will be consistent with that read by your phone when you
press your finger against the fingerprint sensor.
3. Make sure the finger area you press against the fingerprint sensor is the same as the one you enrolled
on your phone. It is recommended you use the gesture you often use when you enroll your fingerprint.
3.27 What can I do to successfully unlock the screen if my
fingers are dry?
When your fingers are dry naturally, in dry seasons (autumn and winter) or in plateau areas, during rest,
or after you carry heavy objects, you may fail to unlock the screen using your fingerprint.
Fingerprints increase the friction between your finger and the object you want to touch. If your
fingerprint is too dry, the friction will decrease.
Solution:
1. Press your finger against the fingerprint sensor more strongly.
2. Keep your fingers moderately humid by blowing hot air onto them or washing them.
3.28 What can I do to successfully unlock the screen if my
fingers are wet or sweaty?
If your fingers are sweaty or still wet after you wash your hands, you may fail to unlock the screen
using your fingerprint.
To solve this problem: Wipe your fingers with tissues and ensure your fingers are free of water or sweat.
September 2015
INTERNAL
52
3.29 Why do people whose fingerprint patterns are shallow
often fail to unlock the screen using the fingerprint?
Female and children's fingers are slim and their fingerprint patterns are shallow.
1. Slim fingers may not be able to touch the edges of the fingerprint sensor, which may result in an
incorrect fingerprint image collection. The edges of your phone's fingerprint sensor provide a weak but
stable electricity signal. When a finger touches the edges, the sensor generates sensing capacitance on
its surface to produce the fingerprint image. If the finger doesn't touch the edges properly, the image
quality may be poor.
2. Shallow fingerprint patterns may also cause poor quality fingerprint images.
To solve this problem: Use the finger pad to cover the whole fingerprint sensor and its edges to enroll
clear and stable fingerprints.
3.30 Why does the fingerprint sensor often fail to recognize my
fingerprint and respond slowly when I'm unlocking the screen?
Circulation in your fingers will deteriorate in high-altitude locations, when sedentary or when lifting
heavy objects, resulting in dry skin and therefore slight changes to the shape of your fingerprint. Refer
to the solutions for dry skin above, e.g. press slightly harder on the fingerprint sensor and keep your
skin moist by breathing onto your fingers or washing your hands and then wiping them dry.
3.31 Why does my phone read my fingerprint slowly in winter
or when the weather is dry?
Your fingerprint changes with different environmental elements, such as temperature, humidity, acidity,
and oiliness. Fingerprint enrolling and reading are also affected by fingerprint patterns.
Before enrolling your fingerprint, clean your fingers. Keep your fingers in a moderate humidity and
moist condition. For example, if your fingers are too dry, your phone may fail to identify your
fingerprint.
If your fingers are sweaty, it is recommended you use tissues to wipe them before you unlock the
screen.
If your fingers are dry, you may need to press your finger against the sensor more strongly.
3.32 Why can I unlock the screen using other fingerprints?
1. Other fingers may have accidentally touched the fingerprint sensor when you were registering.
You can register six fingerprint images in total. However, it is recommended you do not register
multiple fingerprints for the same mode.
2. You may have registered the fingerprints in visitor mode.
If privacy protection is enabled, go to Settings > Security > Privacy protection > Fingerprint
Management to check.
September 2015
INTERNAL
53
3. If the problem persists, delete all the fingerprints in owner and visitor modes, restart your phone, and
register your fingerprints again.
3.33 Why can I only unlock my phone with my fingerprint after
I restart it?
Check how often this occurs. This problem is caused by a software defect rather than the hardware of
the fingerprint sensor or your phone. Please pay attention to the follow-up version instructions.
3.34 Why can't I unlock the screen using my fingerprint? Why
can't I find the fingerprint option under Settings?
If you can't unlock your screen using your fingerprint, go to Settings > Privacy & security and check
whether there is a fingerprint ID option. If not, restart your phone and check whether the fingerprint ID
option exists.
If you can't find the fingerprint ID option under Settings, take your phone to a Huawei service center.
3.35 Why can't I unlock the screen using my fingerprint when
my phone is connected to another brand charger?
Please use the standard charger that comes with your phone.
Non-standard chargers have different anti-interference capabilities. The interference from the power
supply will affect the performance of the fingerprint sensor.
3.36 Why can I unlock my screen even if my finger is not
perfectly aligned with the fingerprint sensor?
Your phone's fingerprint sensor has an identification angle of 360 degrees, so it can read your
fingerprint even if your finger is not perfectly aligned with the sensor.
3.37 Can anyone access my fingerprint information?
Your fingerprint information is stored independently within the hardware package. No one can read the
fingerprint information, and the fingerprint information will not be uploaded to any server. This storage
mechanism contributed to our cooperation with Alipay in establishing industrial standards for a
fingerprint-based payment system.
September 2015
INTERNAL
54
3.38 Why do I have to register my fingerprint several times and
at different angles?
Your phone can record a large area of your fingerprint when you register it several times at different
angles, making it easier for your phone to read. For example: If you register four different areas of your
fingerprint, you can use any one of them to unlock your phone.
When you register your fingerprint, the screen will tell you to record the center and edges of your finger
several times. Your phone has a fingerprint identification angle of 360 degrees. Press your finger against
the sensor at any angle to register it.
Multiple fingerprint images will be registered. If any image does not register, your phone will ask you to
do it again.
2. The fingerprint sensor is pressure-sensitive. There is a weak signal surrounding the depressed
fingerprint identification area. When you press your finger against this area, your fingerprint is
transmitted to the contact surface for identification.
For female users, use the finger pad to press the fingerprint sensor and make sure the edges of your
finger are fully enrolled to make it easier to unlock.
3. Fingers may be dry or wet (oily or sweaty). If your finger is dry, to avoid unclear fingerprint images,
you need to press your finger against the fingerprint sensor more strongly. If your finger is wet, sweaty,
or oily, it is recommended you use tissues to wipe your fingers before you enroll your fingerprint.
4. If the fingerprint sensor or your finger is dirty, your phone may fail to read your fingerprint. Check
that there is no dust, sweat, or other smudges on your finger or the fingerprint sensor. Clean the
fingerprint sensor, if necessary.
3.39 Why doesn't my fingerprint register successfully?
1. Don't move your finger while you are registering it.
2. Keep your finger clean and dry.
When registering your fingerprint, press it down as you would normally, and make sure the whole
surface area of your finger is recorded.
3.40 Why can't I use my fingerprint to unlock my phone when a
third-party screen lock application starts?
To ensure fingerprint security, your phone's fingerprint service is not open to, and can't be used on
third-party applications.
3.41 Why can't I unlock my phone or register my fingerprint
when I swipe my finger on the fingerprint sensor?
Your phone's fingerprint sensor is pressure-sensitive. You only need to slightly press your finger against
the sensor to unlock the screen or register your fingerprint. Don't scratch the fingerprint sensor.
September 2015
INTERNAL
55
3.42 How do I unlock the screen when I am not able to use the
fingerprint feature?
Before setting up the fingerprint unlock feature, you must set the screen unlock method to Number
password or Combined password and create a screen unlock password. If your phone can't recognize
your fingerprint or you are unable to use the fingerprint unlock feature, you can unlock the screen by
entering the preset password.
3.43 How can I access file safe when I am not able to use the
When you enable file safe in Files, you will be required to create a password and enable fingerprint
unlocking. On the file safe login page, place your finger on the fingerprint sensor to access it. If your
phone doesn't recognize your fingerprint or you are unable to use the fingerprint unlock feature, you can
access file safe by entering your preset password.
3.44 How do I access the App lock when I am not able to use the
After enabling App lock in Phone Manager, you will be prompted to set an App lock password and
enable fingerprint unlocking. On the App lock screen, place your finger on the fingerprint sensor to
access it. If your phone doesn't recognize your fingerprint or you are unable to use the fingerprint
unlock feature, you can access App lock by entering your preset password.
3.45 How do I delete the fingerprints registered on my phone?
Go to Settings > Fingerprint ID > Fingerprint management and enter the unlock password. Select
the fingerprints you want to delete in the fingerprint list and touch Delete.
You can also access the phone using the owner password. Go to Settings > Security > Privacy
protection and enter the owner password. Touch Fingerprint management and check all the
fingerprints registered in owner mode and visitor mode.
3.46 How can I disable fingerprint unlock?
1. Go to Settings, then touch Screen lock & passwords > Password and follow the onscreen
instructions to enter the screen unlock password. In the lock screen settings, select None or Pattern to
disable fingerprint unlock.
2. Alternatively, go to Settings > Fingerprint ID > Fingerprint management, enter your screen
unlock password and then turn off the Unlock screen switch.
3. Using either of the above methods will not delete your fingerprint(s). If you delete the fingerprint(s)
from your phone, fingerprint unlock will be automatically disabled.
September 2015
INTERNAL
56
3.47 What happens to my fingerprints when I restore factory
settings?
Restoring factory settings will delete all of your fingerprint data.
3.48 How does consecutive fingerprint detection work?

When your phone screen is off and your fingerprint fails to be recognized the first time, your phone
will vibrate. If fingerprint unlock fails again, your phone will not vibrate.

If the screen is on and fingerprint unlock fails the first time, your phone will vibrate and a message
will be displayed telling you that the fingerprint doesn't match and asking you to remove your
finger and try again. Try again and if fingerprint unlock fails again, your phone will not vibrate and
no message will be displayed.

If you fail to unlock the phone using your fingerprint the first time, your phone can try to detect it
up to 10 times over 30 seconds without you removing your finger in a row. If fingerprint unlock
still fails, your phone will stop the detection.
3.49 Will my fingerprints be deleted when I flash my phone?
If you flash your phone, you will need to enter your fingerprint data again.
3.50 How can I use my fingerprint to answer a call?
Go to Settings > Fingerprint ID and turn on the Answer call switch. When you receive an incoming
call, place your finger on the fingerprint sensor to answer the call.
3.51 Why can't I use the fingerprint sensor to access the
notification panel when the screen is in landscape mode?
You cannot use swipe/double touch gestures on the fingerprint sensor when the screen is in landscape
mode.
3.52 Why won't the fingerprint authentication feature in Alipay
work properly?
If the fingerprint authentication feature doesn't work, update to version 9.0 when you receive an update
prompt upon launching the Alipay app. Once you have updated to version 9.0, you should be able to use
your fingerprint to authenticate payments. You can also update to version 9.0 in the App Center.
If updating to the latest version didn't resolve the issue, go to Settings> Manage apps, then go to the
All tab and uninstall Alipay and the Alipay verification service. Then go to the App Center and
September 2015
INTERNAL
57
download and install the latest version of Alipay. Once you have installed the latest version, configure
the fingerprint settings for payment authentication.
September 2015
INTERNAL
58
4
Screen and display
4.1 Why does the screen brightness change frequently?
September 2015

You have enabled the automatic screen brightness feature.

Open Settings, then go to Display > Brightness and disable Automatic brightness.
INTERNAL
59
4.2 Why does the screen often crash and why does a yellow
frame appear around the edge of the screen?
You have enabled magnification gestures. Magnification gestures are enabled when you touch three
times on the screen. You can then use two fingers to move the screen or touch three times again to
restore the screen to its original position.
When you touch three times on the screen and enable magnification gestures for the first time, a prompt
will be displayed informing you that you have enabled the feature. You can select Disable to disable
magnification gestures or touch Ignore to continue using the feature.
This feature is designed for older or visually impaired users. If you do not require magnification
gestures, disable them under Settings > Accessibility > Magnification gestures.
4.3 Why doesn't the screen display colors properly?
Check whether you have enabled the Color correction mode under Settings > System > Accessibility >
Color correction or Developer options > Simulate color space. If so, disable the Color correction
mode to resolve the issue.
September 2015
INTERNAL
60
4.4 Why does a red frame appear around the edge of the screen?
If you made the developer options visible in your phone's settings, check whether you have enabled
Strict mode enable under All > Developer options. If so, disable it, as this mode is only intended for
software developers.
4.5 Why do the colors look so bright?
The phone is equipped with a "light-emitting" AMOLED display and delivers a color gamut of over
100% NTSC for excellent color reproduction and a better viewing experience.
4.6 Why does the screen appear brighter in dark surroundings?
AMOLED screens have a higher contrast ratio than LCD screens, therefore they appear brighter in dark
surroundings.
4.7 How can I wake the screen using knuckle gestures?
When the screen is on or off, you can draw a letter on the screen using your knuckle (c, w, m or e) to
open a predefined app.
September 2015
INTERNAL
61
4.8 Why is the touchscreen slow to respond or why does the
touchscreen not work properly?

Check that you are using the latest version of EMUI.

If you are using a protective cover or other optional accessories, the touchscreen may not
work properly.
The touchscreen may not work if you are wearing gloves, if your hands are dirty or if you
use sharp objects or your fingernails to touch the screen.
Do not use the touchscreen in damp environments or allow the touchscreen to come into
contact with water, as this may stop it from working properly.
Restart your phone to resolve any temporary software issues.



4.9 Why does my screen look blue when the screen is off?
When the screen is off, it may appear slightly blue when placed under light. This is a deliberate design
feature unique to the Mate S and does not indicate a faulty screen.
4.10 My touchscreen isn't aligned with the controls when I'm
playing games.
If you find that the touchscreen is not aligned correctly when playing a game, check whether you hid the
virtual navigation bar. If so, swipe up from the bottom of the screen to display the navigation bar. You
should now be able to use the controls as normal.
September 2015
INTERNAL
62
September 2015
INTERNAL
63
5
Camera and multimedia
5.1 Optical image stabilization (OIS) doesn't work well for
large amounts of camera shake. Why?
The OIS feature can correct small amounts of camera shake in everyday shooting scenarios. However,
due to the device's limited size, it cannot stabilize an image taken with a large amount of camera shake.
5.2 The rear camera is off-center. Why?
The Mate S lens is equipped with the latest optical image stabilization technology. When you take a
photo, the phone will automatically adjust the position of the lens to capture the best possible shot.
September 2015
INTERNAL
64
6
Managing applications
6.1 Third-party apps
6.1.1 Why does Pao Pao Long crash when I open it?
The version of Pao Pao Long in the Huawei App Center is not compatible with Android 5.1. When you
download the app, a prompt will be displayed informing you that the app is not compatible. Huawei has
asked the app developer to update the app as soon as possible. Look out for update prompts in the App
Center and update to the latest version when a new version is released.
6.1.2 Why does Pop Star crash when I open it?
The version of Pop Star in the Huawei App Center is not compatible with Android 5.1. When you
6.1.3 Why does Pin A crash when I open it?
The version of Pin A in the Huawei App Center is not compatible with Android 5.1. When you
6.1.4 Why does Fishing Joy 2 crash when I open it?
The version of Fishing Joy 2 in the Huawei App Center is not compatible with Android 5.1. When you
6.1.5 Why do links posted in WeChat Moments fail to load?
On WeChat 6.2.4, links may occasionally fail to load in Moments. This is a bug in WeChat and is not a
fault with your phone. Huawei has asked the app developer to update the app as soon as possible. Look
out for update prompts in the App Center and update to the latest version when a new version is
released.
September 2015
INTERNAL
65
6.1.6 When I end an audio call in WeChat and play some music, why
does the sound come from the earpiece, even when I remove my
TalkBand B2 earpiece from the wristband?
This is a bug in WeChat 6.2.4 and is not a fault with your phone. Huawei has asked the app developer to
update the app as soon as possible. Look out for update prompts in the App Center and update to the
latest version when a new version is released.
6.1.7 Why doesn't Alipay respond or why can't I log in?
This is a bug in Alipay 9.0.1.073001 and is not a fault with your phone. Huawei has asked the app
developer to update the app as soon as possible. Look out for update prompts in the App Center and
update to the latest version when a new version is released.
6.1.8 Why doesn't the ICBC app respond sometimes?
This is a bug in version 1.0.1.6 of the ICBC app and is not a fault with your phone. Huawei has asked
the app developer to update the app as soon as possible. Look out for update prompts in the App Center
and update to the latest version when a new version is released.
6.1.9 Why does the Didi driver app crash after logging in?
This is a bug in version 2.9.1 of the Didi driver app and is not a fault with your phone. Huawei has
6.1.10 Why does the Baidu app crash?
This is a bug in version 6.7 of the Baidu app and is not a fault with your phone. Huawei has asked the
app developer to update the app as soon as possible. Look out for update prompts in the App Center and
6.1.11 Why does the Weibo app crash or fail to respond?
This is a bug in version 5.4 of the Weibo app and is not a fault with your phone. Huawei has asked the
app developer to update the app as soon as possible. Look out for update prompts in the App Center and
September 2015
INTERNAL
66
7
Others
7.1 Product specifications
HUAWEI Mate s
product specifications0917.xlsx
7.2 List of pre-installed applications
Pre-installed
Third-party Applications.xlsx
7.3 Dual card slot specifications
Dual Card Slot
Specifications.xlsx
7.4 ROM and RAM allocation
The ROM and RAM sizes displayed on your phone may be smaller than the values in the phone
specifications, because a part is occupied by the system. The Mate S has a 32 GB ROM (standard
edition) and 3 GB RAM. Except for the part that is occupied by the system, it has an available RAM of
at least 350 MB.

September 2015
32 GB ROM
INTERNAL
67
The ROM contains system applications, files, and databases, which take up about 1.5 GB and are
hidden from users. The ROM space available to users is approximately 24 GB. You can use this 24 GB
space to store any type of files.
The following lists the ROM comparison between different phones:
Phone
Total ROM
Available ROM
Galaxy III
16 GB
11.35 GB
Galaxy Note
4 GB
1.51 GB
HUAWEI G520
4 GB
1.84 GB
HUAWEI T8950
4 GB
1.82 GB

1 GB RAM
Part of the RAM is hidden by the Android system for Kernel running. Therefore, the displayed RAM is
smaller than the value in the specifications. The available RAM for users is at least 350 MB.
The following lists the RAM comparison between different phones:
Phone
Total RAM
Available RAM
Galaxy III
1 GB
763 MB
Galaxy Note
1 GB
713 MB
HUAWEI C8950
1 GB
627 MB
HUAWEI T9200
1 GB
656 MB
HUAWEI T9510E
1 GB
713 MB
HUAWEI T8950
1 GB
980 MB
The following table lists the ROM and RAM allocations.
ROM partitions (a phone ROM is similar to a computer hard disk)
64 GB
Partition
Size
Description
Query
method
Boot and operating system data
backup partition
About 128 MB
This partition stores the boot
and operating system backup
data.
Cannot
queried
The data in this partition is
used when you restore your
phone to its factory settings.
September 2015
INTERNAL
68
be
Partition
Partition
updates
reserved
for
HOTA
64 GB
Size
Description
Query
method
About 256 MB
This partition is reserved for
HOTA updates.
Cannot
queried
be
be
The device provider or the
carrier pushes update patches
using this partition.
System partition
About
MB
2560
This partition is used for the
Android operating system.
Cannot
queried
Virtual microSD card partition
About 53.4 GB
This partition is used when no
microSD card is inserted in
your phone and certain
operations, such as taking
photos, transmitting files
using
Bluetooth,
and
synchronizing data with a
computer, need to be
performed.
With
this
partition, you can use all the
Android system functions
without
an
additional
microSD card.
Can be queried
under
Settings
>
Storage > SD
card.
Others
About 700 MB
This partition includes:
Cannot
queried
Space occupied
partition tables
by
file
be
Space lost due to formatting
Total
64 GB
These partitions belong to the premium edition
and are for your reference only. Partition sizes
vary according to the customized product
version.
Standard ROM: 32 GB
Premium ROM: 64 GB
RAM partitions (a phone RAM is similar to a computer RAM)
September 2015
3 GB
Partition
Size
Description
Query
method
Bottom partition
About 56 MB
This partition saves the
display cache and bottom
wireless protocol stacks.
Cannot
queried
INTERNAL
69
be
64 GB
Partition
Size
Description
Query
method
Operating system and user partition
About 2.5 GB
This partition is used by the
Android operating system and
applications.
Can be queried
using
a
third-party
application but
the value may
differ
by
application
Total
3 GB
These partitions are for your reference only.
Partition sizes vary according to the customized
product version.
7.5 Phone at a glance
September 2015
INTERNAL
70

3.34 Why can`t I unlock the screen using my fingerprint?

Transcription

Similar documents

Seamless integration

Operation Kidsafe Safety Week Flyer Vaden Nissan 2016

R3310 POS Series

64Bit Processor --- KINGZONE N3 PLUS Is Coming

Why I Hacked TouchID and Still Think It`s Awesome

CSE 40537 / 60537: Biometrics

Discovering God`s Fingerprint at the San Gennaro Festival

Babe Ruth Online - SACRED HEART CYO BABE RUTH LG.