Catalog `12 35-58.indd - Behling Racing Equipment

Transcription

Length
8”
8-1/4”
8-1/2”
8-3/4”
9”
9-1/4”
9-1/2”
9-3/4”
10”
10-1/4”
10-1/2”
10-3/4”
11”
11-1/4”
11-1/2”
10° Upper A-arm
376-15500-SLB
376-15505-SLB
376-15510-SLB
376-15515-SLB
376-15520-SLB
376-15525-SLB
376-15530-SLB
376-15535-SLB
376-15540-SLB
376-15545-SLB
376-15550-SLB
376-15555-SLB
376-15560-SLB
376-15565-SLB
376-15570-SLB
Price
137.99
137.99
137.99
137.99
137.99
137.99
137.99
137.99
137.99
137.99
137.99
137.99
137.99
137.99
137.99
10° Screw-In
A-Frame Only
376-15500-SLBA
376-15505-SLBA
376-15510-SLBA
376-15515-SLBA
376-15520-SLBA
376-15525-SLBA
376-15530-SLBA
376-15535-SLBA
376-15540-SLBA
376-15545-SLBA
376-15550-SLBA
376-15555-SLBA
376-15560-SLBA
376-15565-SLBA
376-15570-SLBA
Description
Part Number
Slug Kit 0-1/2” 376-15050
Slug Centered 376-15041
Slug 1/16”
376-15042
Slug 1/8”
376-15043
Slug 3/16”
376-15044
Slug 1/4”
376-15045
10° Upper A-arm
20° Upper A-arm
418-001-100-800-10
418-001-100-820-10
418-001-100-850-10
418-001-100-875-10
418-001-100-900-10
418-001-100-920-10
418-001-100-950-10
418-001-100-975-10
418-001-100-100-10
418-001-100-102-10
418-001-100-105-10
418-001-100-107-10
418-001-100-110-10
418-001-100-115-10
***N/A****
***N/A****
***N/A****
***N/A****
418-001-100-900-20
418-001-100-920-20
418-001-100-950-20
418-001-100-975-20
418-001-100-100-20
418-001-100-102-20
418-001-100-105-20
418-001-100-107-20
418-001-100-110-20
418-001-100-115-20
Description
Slug 5/16”
Slug 3/8”
Slug 7/16”
Slug 1/2”
Slug Slotted
Part Number
Price
376-15046
376-15047
376-15048
376-15049
376-15051
10.99
10.99
10.99
10.99
79.95
Price
49.99
49.99
49.99
49.99
49.99
49.99
49.99
49.99
49.99
49.99
49.99
49.99
49.99
49.99
49.99
• Free movement
• No binding
• Powder coated satin black
• Uses screw in ball joint
• 4 thrust bearings puts no
binding under braking
• 4 inner shaft bearings gives free
movement thru travel
• Measured from ¢ of cross shaft to ¢ of ball joint
• No special built control arms are available in this style
• K772 Screw-In ball joint
Length
8”
8-1/4”
8-1/2”
8-3/4”
9”
9-1/4”
9-1/2”
9-3/4”
10”
10-1/4”
10-1/2”
10-3/4”
11”
11-1/2”
Price
79.99
10.99
10.99
10.99
10.99
10.99
• OEM replacement parts
• JOES arms are completely rebuildable
• Shaft available in aluminum or steel
Description
Steel shaft assembly
Alum shaft assembly
Sealed roller bearing
Housing w/frame mount
Bearing spacer
Washer or end cap
Part Number
Bearing
Price
376-15027
99.95
376-15026
99.95
376-9011020 5.99
376-915027-2 12.99
376-915027-5 2.49
376-915027-4 3.49
Housing
Bearing Spacer
Bolt
Washer
• 10° Screw in Ball Joint K772
• A-arms come with the standard
6 inch bolt centers 1/2” holes
• .095 tubing and close tolerances
• Minimized flex and binds for repeatable chassis set ups
Price
138.00
138.00
138.00
138.00
138.00
138.00
138.00
138.00
138.00
138.00
138.00
138.00
138.00
138.00
Length
8”
8-1/4”
8-1/2”
8-3/4”
9”
9-1/4”
9-1/2”
9-3/4”
Part Number
Price
376-15500
376-15505
376-15510
376-15515
376-15520
376-15525
376-15530
376-15535
59.99
59.99
59.99
59.99
59.99
59.99
59.99
59.99
Length
10”
10-1/4”
10-1/2”
10-3/4”
11”
11-1/4”
11-1/2”
Part Number
Price
376-15540
376-15545
376-15550
376-15555
376-15560
376-15565
376-15570
59.99
59.99
59.99
59.99
59.99
59.99
59.99
• Holds A-arm nuts so you only
need one wrench to change shims,
slugs or whole A-arm
• 6” Center
• Anodized aluminum
376-14900
22.99
Visit us at 5170 N 125th St. Butler WI 53007 or online at www.behlingracing.com
35
Suspension • Steering Components • Suspension • Steering Components • Suspension • Steering Components • Susspennsiionn • Steeerinng Compoonenntss • Suspension • C
• Bearing upper with
ultra low resistance
• 10° Screw in Ball K772
Joint-Slotted Shaft-Specify
• Bolt on tube section
• 4 Sealed Roller Bearings
• Eliminate friction and resistance
• Incredibly smooth rotating action
• The bolt on A-Arm tube section saves you
money and allows for quick changes at the track.
• Split design is great for wrapping around frame mount
• Slotted to accept the JOES A-arm slug
• Machined of aluminum
• Engraved for identification
• Slugs sold separately by 1/16”
• Only one slug needed
• Kit is 0”-1/2” by 1/16”
Suspension • Ste
t er
e in
i g Co
omp
mponen
ne ts
t • Sus
uspe
penssion
on • Steering Components • Suspension • Steering Components • Suspension • Steering Components • Suspension • St
• Bolt-In Ball Joint
• K6024 standard or haised roll center K6136
• .095 tubing and close tolerances
• Minimized flex and binds for repeatable chassis set ups
Length
8”
8-1/4”
8-1/2”
8-3/4”
9”
9-1/4”
9-1/2”
9-3/4”
Part Number
Price
376-15830
376-15835
376-15840
376-15845
376-15850
376-15855
376-15860
376-15865
59.99
59.99
59.99
59.99
59.99
59.99
59.99
59.99
Length
10”
10-1/4”
10-1/2”
10-3/4”
11”
11-1/4”
11-1/2”
Part Number
Price
376-15870
376-15875
376-15880
376-15885
376-15890
376-15895
376-15900
59.99
59.99
59.99
59.99
59.99
59.99
59.99
Part Number
Price
586-100-01-0800
586-100-01-0810
586-100-01-0820
586-100-01-0830
586-100-01-0900
586-100-01-0910
586-100-01-0920
586-100-01-0930
62.99
62.99
62.99
62.99
62.99
62.99
62.99
62.99
014-20080
Part Number
Length Part Number
10”
586-100-01-1000
10-1/4” 586-100-01-1010
10-1/2” 586-100-01-1020
10-3/4” 586-100-01-1030
11”
586-100-01-1100
11-1/4” 586-100-01-1110
11-1/2” 586-100-01-1120
6” Centers
• 1/2” mounting holes
• 6” Centers for upper A-frame
• 3/8” thick
• 2° Anti-dive
• Double ball joint plate makes it easy to
mount to inside of frame mount
• Much stronger than cutting ball joint plate
Length
10”
10-1/4”
10-1/2”
10-3/4”
11”
11-1/4”
11-1/2”
Length
8”
8-1/4”
8-1/2”
8-3/4”
9”
9-1/4”
9-1/2”
9-3/4”
Price
62.99
62.99
62.99
62.99
62.99
62.99
62.99
1/2” through holes
11.99
Price
586-100-01-1000-DBJ
586-100-01-1010-DBJ
586-100-01-1020-DBJ
586-100-01-1030-DBJ
586-100-01-1100-DBJ
586-100-01-1110-DBJ
586-100-01-1120-DBJ
67.49
67.49
67.49
67.49
67.49
67.49
67.49
• Staggered holes 1”-2-1/8” by 3/8”
• 1/2” mounting holes
• 6” Centers for upper A-frame
• 3/8” thick
• 2.5° Anti-dive
418-032-10435
6” Centers
2-1/8”
1-3/4”
1-3/8”
1”
11.49
Screw-In ball joint
• Make your own adjustable A-arm
• 5/8”-18 mounting stud
• Excepts screw-In ball joint K772
• Has 3/8” mounting hole for clevis
• Slotted one piece design
• Change camber without removing the A-Arm bolts
• One piece design saves you time
• Kit contains 1/16” - 1/2” shims.
5/8”-18 RH thread
3/8” Hole for clevis
Description
Straight ball joint holder
15° ball joint holder
Part Number
586-07-100
586-07-100R
Price
• Holds A-arm nuts so you only need one wrench to change
shims, slugs or whole A-arm
• 6” Center
376-14900
36
22.99
376-14050
38.99
22.25
22.25
• Adjust caster without putting your A-Arm in a bind
• Machined out of aluminum, anodized and laser engraved.
• Change camber without removing the A-Arm bolts
• Slotted one piece design
• 1 piece design saves you time
• Kit contains 1/32” - 1/4” tapered shims.
376-14250
49.99
Call 800-255-4117 or 262-783-7474 for Current Pricing!
Fax us 24hr at 262-783-6293
• Uses Small Ball Joint Plate
• Uses K5208 ball joint
• Slotted Steel Shaft
• Fits 78-88 GM Intermediate Chassis
1-3/4”
5-1/2”
Length
8”
8-1/2”
Part Number
Price
586-100-06-0800RHS-1
586-100-06-0820LHS-1
7-3/4”
67.49
67.49
Length
7-1/2”
8”
8-1/2”
9”
9-1/2”
IMCA’s 2004 rules now allow the stock car class to use
spec tubular upper control arms. The stock arms are
getting hard to find and don’t have the strength of
the tubular design.
• Bolts to your stock mount and accepts
stock ball joints K5208
• Mid-size GM metric only.
• Stronger than stock upper
• Right arm length is 8”
• Left arm length is 8.5”
Cross Shaft
Aluminum
Steel
51.49
51.49
51.49
51.49
51.49
K6141 Ball Joint
Right side arm pictured
RH Upper 8.0”
747-910-34393-L
747-910-34394-L
747-910-34393-R
747-910-34394-R
Price
42.99
49.99
K6141 Ball Joint
Lower Control Arm Measurement
1/2” Hole for solid rod
end 608-RER8-12
Description
15-5/8 bare
16-5/8 bare
17-5/8 bare
18-5/8 bare
418-001-475
418-001-476
418-001-477
418-001-478
418-001-479
Price
LH Upper 8.5”
3/4”-16 thread for rod end
(464-MXM-12 recommended)
Part Number
Part Number
338-229615
338-229616
338-229617
338-229618
Price
55.99
55.99
55.99
55.99
3/8” Hole for clevis
Description Left Side
14-1/2 Left side bare
16-1/2 Left side bare wide stub
Description Right Side
16-1/2 Right side bare
18-3/4 Right side bare wide stub
Part Number
Price
418-001-17145
418-001-17155
418-001-17165
418-001-17165-03
418-001-17172LS
45.99
45.99
45.99
45.99
45.99
418-001-17165RS
418-001-17172RS
418-001-17177
418-001-17187
418-001-17187-03
45.99
45.99
45.99
45.99
45.99
1/2” Shock mount
Threaded K727
or
Press-In K6141
1/2” Shock mount
Rubber bushing
Strut bar mount
Length
15-5/8
16-5/8
17-5/8
17-5/8
18”
19”
Type
Press-In
Screw-In
Screw-In
Press-In
Press-In
Press-In
Application
LH Std GRT
LH Rayburn, Shaw, BRC
RH Rayburn, Shaw, BRC
RH Std GRT
LH “Wide” Rayburn
GRT Rayburn
Part Number
586-100-21126P-2
586-100-21123P-2
586-100-21125P-2
586-100-21127P-2
586-100-21128P-2
586-100-21129P-2
Price
59.95
59.95
59.95
59.95
59.95
59.95
Length
16-5/8
16-5/8
17-5/8
17-5/8
18”
18”
19”
19”
Type
Press-In
Screw-In
Press-In
Screw-In
Press-In
Screw-In
Press-In
Screw-In
Application
LH Masterbuilt
LH Masterbuilt/Warrior
RH Masterbuilt
RH Masterbuilt/Warrior
GRT Rayburn
GRT Rayburn
1/2” Stud mount
Part Number
586-100-21126P-2
586-100-21123P-2
586-100-21125P-2
586-100-21127P-2
586-100-21128P2
586-100-21118P-2
586-100-21129P-2
586-100-21119P-2
Threaded K727
or
Press-In K6141
Price
59.95
59.95
59.95
59.95
59.95
59.95
59.95
59.95
37
• Uses Small Ball Joint Plate
• Uses K5208 ball joint
• Steel Cross Shaft
• 6-5/8” Mounting centers
• Fits 78-88 GM Intermediate Chassis
Suspension • Ste
t er
e in
i g Co
omp
mponen
ne ts
t • Sus
uspe
penssion
• Available in 5/8 an 3/4
• Plated steel
• Bolts directly to dirt lower control arm
Description
5/8-18 threaded strut bar
3/4-16 threaded strut bar
• Newly manufactured
• Stock Chevelle 1964-1972
• IMCA LEGAL
• Arm comes bare
• Uses stock ball joint
• Uses stock bushings
Part Number
784-TWMLW3320
494-ALL56190
Price
Description Part Number
Bushing
586-100-223904
Sleeve
586-100-223905
14.00
14.99
Stock ball joint
K5103
Price Description
5/8 to 1/2”
3/4 to 1/2”
8.49
7.49
Part Number
Price
014-10276
014-10277
8.99
7.99
Small bushing
014-20075
• Newly manufactured
• fits 78-87 G-body chassis
• Used to widen front end
• Arm comes bare
• Uses stock ball joint
• Uses stock bushings
Stock ball joint
K5103
Small bushing
014-20075
Large bushing
014-20076
Large bushing
014-20076
Description
Left side Chevelle lower bare
Right side Chevelle lower bare
Stock ball joint
Steel Small bushing 1.4” diameter
Steel Large bushing 1.65” diameter
Part Number
Price
586-100-200C-CHL
586-100-200C-CHR
351-IK5103
014-20075
014-20076
99.95
99.95
15.99
19.99
19.99
Description
Left side Nova lower bare
Right side Nova lower bare
Stock ball joint
Steel Small bushing 1.4” diameter
Steel Large bushing 1.65” diameter
Part Number
318-HRP4262
318-HRP4263
351-IK5103
014-20075
014-20076
Price
129.00
129.00
15.99
19.99
19.99
HYPER-FLEX™ performance polyurethane control arm bushings do not rot or deteriorate from oils or atmospheric conditions such as
ozone, smog, road salt, chemicals, and other corrosives. Our bushings will not deteriorate in a few short years and cause that mushy,
uncertain steering response, like rubber ones will. Also, they make a dramatic improvement in the way your car or truck handles- with quicker response and greater
vehicle control, whatever your demands on the vehicle. All of our bushings are full floating and non-binding... especially important when ride height is altered or
greater suspension load is required. Proper alignment of caster and camber is maintained by the correct durometer of the bushing formulation. Rear control arm
HYPER-FLEX™ bushings on G.M. and Ford four-link systems are a must for controlling wheel hop and increasing cornering control. Most sets come with plated
outer metal shells, are pre-lubricated with a synthetic compound to inhibit squeaks.
• Replaces OEM bushings
• Provides more performance
• Increased life over stardard bushings
• Eliminates squeeks
• Improvement in the way your car or truck handles
• Quicker response and greater vehicle control
Steel internal sleeve
Hyper-Flex
Polyurethane
Chevrolet: Chevelle, El Camino, Monte Carlo, Malibu and Laguna
Year
1978-88
1978-88 ***Lowers only***
1975-77
1974 (1-3/8” O.D. front lower)
1968-72 (Round Bushing)
1968-72 (Oval, use OEM Shell)
Front End
Year
1978-88
Front End
Price
Rear End
234-3-3156G 65.99
234-3-3132G
234-3-3171G 39.99
234-3-3105G 61.99
234-3-3132G
234-3-3111G 61.99
234-3-3132G
234-3-3105G 61.99
234-3-3132G
234-3-3103G 61.99
234-3-3103G 61.99
234-3-3101G 61.99
234-3-3132G
234-3-3112G 66.99
Pontiac: LeMans, GTO, Tempst, Grand Am and Grand Prix
Price
Rear End
Price
86.99
86.99
86.99
86.99
86.99
Price
234-3-3156G 65.99
234-3-3132G 86.99
Buick: Regal(RWD), Grand National, Skylark(thru 72), Century(RWD)
38
Steel housing
Year
1974-77
1978-88
Front End
Price
234-3-3105G 61.99
234-3-3156G 65.99
Rear End
Price
234-3-3132G 86.99
234-3-3132G 86.99
Fax us 24hr at 262-783-6293
100-2725
Oval A-arm
Bushing
Front of Arm
Year
1978-1988
1973-1977
67-72 (Round Rear)
67-72 (Oval Rear)
Front of Arm
586-100-2714LW
586-100-2721LW
586-100-2720LW
586-100-2720LW
586-100-2720LW
Cutlass & Grand Prix
586-100-2714LW
586-100-2721LW
586-100-2720LW
586-100-2720LW
Caprice & Impala
Year
1971-1996
Front of Arm
Price
31.95
31.95
31.95
31.95
31.95
Price
31.95
31.95
31.95
31.95
Front of Arm
100-2721
1.65” Diameter
2.39 length
1.25 lbs
100-2722
1.90” Diameter
2.39 length
1.25 lbs
Rear of Arm
Price
586-100-2721LW
586-100-2722LW
586-100-2722LW
586-100-2721LW
586-100-2725
Rear of Arm
31.95
31.95
31.95
31.95
39.50
Price
586-100-2721LW
586-100-2722LW
586-100-2721LW
586-100-2725
31.95
31.95
31.95
39.50
Year
1978-1988
1975-1977
1973-1974
67-72 (Round Rear)
67-72 (Oval Rear)
Front of Arm
586-100-2714
586-100-2721
586-100-2720
586-100-2720
586-100-2720
Cutlass & Grand Prix
Year
1978-1988
1973-1977
67-72 (Round Rear)
67-72 (Oval Rear)
Front of Arm
586-100-2714
586-100-2721
586-100-2720
586-100-2720
Price
16.50
16.50
16.50
16.50
16.50
Price
16.50
16.50
16.50
16.50
Rear of Arm
Price
586-100-2721
586-100-2722
586-100-2722
586-100-2721
16.50
16.50
16.50
16.50
***N/A***
Rear of Arm
Price
586-100-2721 16.50
586-100-2722 16.50
586-100-2721 16.50
***N/A***
Caprice & Impala
Price
586-100-2721LW 31.95
Camaro & Firebird-T/A
Year
1973-1979
1967-1972
100-2720
1.40” Diameter
2.39 length
1.25 lbs
Monte Carlo, Malibu and Chevelle
Monte Carlo, Malibu and Chevelle
Year
1978-1988
1975-1977
1973-1974
67-72 (Round Rear)
67-72 (Oval Rear)
100-2714
1.40” Diameter
2.94 length
1.25 lbs
Price
Rear of Arm
Price
586-100-2722LW 31.95
Rear of Arm
Price
586-100-2721LW 31.95
586-100-2720LW 31.95
586-100-2722LW 31.95
586-100-2721LW 31.95
Front of Arm
Rear of Arm
Year
1971-1996
Front of Arm
Price
586-100-2721 16.50
Camaro & Firebird-T/A
Year
1973-1979
1967-1972
Front of Arm
Price
586-100-2721 16.50
586-100-2720 16.50
Rear of Arm
Price
586-100-2722 16.50
Rear of Arm
Price
586-100-2722 16.50
586-100-2721 16.50
Nova
Nova
Year
1975-1979
1973-1977
1968-1972
Price
586-100-2721LW 31.95
586-100-2720LW 31.95
586-100-2721LW 31.95
Price
586-100-2722LW 31.95
586-100-2721LW 31.95
586-100-2721LW 31.95
Front of Arm
586-100-2724
586-100-2743
586-100-2744
586-100-2723
Price
11.95
11.95
11.95
11.95
Rear of Arm
586-100-2724
586-100-2744
586-100-2744
586-100-2723
Front of Arm
Price
586-100-2743 11.95
586-100-2723 11.95
Rear of Arm
Price
586-100-2744 11.95
586-100-2723 11.95
Caprice & Impala
Price
Year
1980-1996
1974-1979
1971-1973
Front of Arm
586-100-2743 11.95
586-100-2743 11.95
586-100-2744 11.95
Camaro & Firebird
586-100-2743 11.95
586-100-2744 11.95
586-100-2744 11.95
Year
1971-1979
1970
1967-1969
Front of Arm
Rear of Arm
Price
586-100-2743 11.95
***N/A***
11.95
586-100-2723 11.95
Rear of Arm
Price
Rear of Arm
Price
586-100-2722 16.50
586-100-2721 16.50
586-100-2721 16.50
• For 351-IK727
• Large threaded lower
• 1.5 taper ball joint
• Chrylser ball joint
Price
11.95
11.95
11.95
11.95
Nova
Year
1975-1979
1968-1974
Front of Arm
586-100-2721 16.50
586-100-2720 16.50
586-100-2721 16.50
• For 351-IK719
• Small threaded lower
• Used in IMCA
Monte Carlo, Malibu, Chevelle, Regal, Cutlass & Grand Prix
Year
1978-1988
1974-1977
1973
1967-1972
Year
1975-1979
1973-1977
1968-1972
Price
Price
586-100-2744 11.95
***N/A***
11.95
586-100-2723 11.95
586-100-40719
11.00
586-100-40727
• For 351-IK727
• has flange
• For 351-IK727
586-100-40727-1 11.50
586-100-46141
• For 351-IK727
• Adapts IK6141 to IK727
338-22411
11.00
11.00
Threaded for large
Chrysler lower 351-IK727
19.49
Machined to
press in IK6141
ball joint holder
39
100-2714LW
100-2720LW
100-2721LW
100-2722LW
1.40” Diameter 1.40” Diameter 1.65” Diameter 1.90” Diameter
2.94 length
2.39 length
2.39 length
2.39 length
.625 lbs
.625 lbs
.625 lbs
.625 lbs
Suspension • Ste
t er
e in
i g Co
omp
mponen
ne ts
t • Sus
uspe
penssion
• Small BJ pattern
• 2.0” taper
• Full size 71-85 Impala
• 70-81 Camaro
• 73-88 Chevelle
• Dust boot
• Includes hardware
• Afco #20032
• Fits all strut uppers
• 1.5” taper
• Fits most tubular spindles
• Bolt-In upper
• Dust boot
• Afco #20031
• 2.0” taper
• 3/8” Raised Roll Center
• Fits spindles for:
-Full size 71-85 Impala
-70-81 Camaro
-73-88 Chevelle
• Bolt-In upper
• Dust boot
• Afco #20032-1
• Fits all screw in uppers
• 1.5” taper
• Screw in upper
• Dust boot
• Afco #20034
351-IK5208
351-IK6024
351-IK6136
351-IK772
12.99
• Press-In
• 1.5” taper
• Popular for IMCA
• 64-72 Chevelle
• 67-69 Camaro
• Dust boot
• Afco #20033
351-IK5103
17.99
• Press-In
• 2.0” taper
• 3/8” Raised roll center
• Taper 71-85 Impala
• Common Press-In
• Dust boot
• Afco #20038-1
15.99
351-IK6117
15.99
• Screw-In
• 1.5” taper
• Popular IMCA Modified
• Use sleeve 100-40719
• Ream spindle to fit taper
• Dust boot
• Uses weld ring
586-10-40719
• Afco #20035
• Screw-In
• 1.5” taper
• Large Chrysler Lower
• Dust boot
• Uses weld ring
586-100-40727
• Afco #20036
351-IK719
351-IK727
30..45
• Low Friction
• Free of bind
• 32° Working angle
• Smooth 360° operation
• 1.5” taper
• Replaces 351-IK6024
111-810-0008
38.99
• Low Friction
• Free of bind 360° operation
• Press-In with 2.0” taper
-73-88 Monte Carlo
-70-96 Camaro
-73-88 Chevelle
111-810-0025
40
38.99
30.36
16.99
15.99
• Low friction and Free of bind
• Smooth 360° operation
• 1.5” taper same as 351-IK772
• Fits most tubular spindles and all strut uppers
Description
Ball joint with stock pin
Ball joint with +1/2” pin
Ball joint with +1” pin
38.99
• Low Friction
• Common Press-In
• Dust boot
• Uses weld ring 586-100-406141
111-810-0019
351-IK6145
16.99
• Low Friction
• 2.0” taper
• 71-85 Impala 73-88 Chevelle
• 3/8” Raised Roll Center
111-810-0009
• Press-In
• 2.0” taper
-73-88 Monte Carlo
-70-96 Camaro
-73-88 Chevelle
• Dust boot
• Afco #20039
• Press-In
• 2.0” taper
• Common Press-In
• Dust boot
• Uses weld ring
586-100-406141
• Afco #20038
351-IK6141
16.99
38.99
Part Number
Price
111-810-0001 38.99
111-810-0002 38.99
111-810-0003 38.99
• Low Friction
• Small BJ pattern
• 2.0” taper
• Full size 71-85 Impala
• 70-81 Camaro, 73-88 Chevelle
111-810-0010
38.99
• Low Friction
• Popular for IMCA
• 64-72 Chevelle
• 67-69 Camaro
111-810-0022
38.99
Fax us 24hr at 262-783-6293
Bolt-in Style Upper Ball Joint
Stock Application
All strut uppers, Most tubular spindles
1971-85 Impala, 70-81 Camaro and 73-88 Chevelle
Stock Ball Joint
351-IK6024
351-IK5208
Taper
1.5
2.0
Complete Ball Joint
Price
608-1210-101
608-1210-104
46.99
46.99
Screw-In Style Ball Joint
Stock Application
Fits all Screw-in uppers
Large Screw-In Lower Chrysler type
Stock Ball Joint
351-IK772
351-IK727
Taper
1.5
1.5
Complete Ball Joint
Price
608-1210-105
608-1210-106
46.99
46.99
Stock Ball Joint
351-IK6141
351-IK6117
351-IK6145
***N/A***
Taper
2.0
2.0
2.0
1.5
Press-In Style Lower Ball Joint
Stock Application
Common Press-In 1971-85 Impala
3/8” Raised Roll Center 1971-85 Impala
73-88 Monte Carlo, 70-96 Camaro and 73-88 Monte
1210-106 with adapter ring to replace 1210-102
Complete Ball Joint
Price
608-1210-102
608-1210-108
608-1210-109
608-1210-112
46.99
46.99
46.99
52.99
Replacement Parts
Ball Joint Number
608-1210-101
608-1210-102
608-1210-104
608-1210-105
608-1210-106
608-1210-108
608-1210-109
Std Pin
+.5 Pin
+1 Pin
608-9029-220
608-9029-223
608-9029-222
608-9029-220
608-9029-224
608-9029-226
608-9029-227
608-9029-200
608-9029-214
608-9029-205
608-9029-200
608-9029-216
608-9029-218
608-9029-209
608-9029-201
608-9029-215
608-9029-204
608-9029-201
608-9029-217
608-9029-219
608-9029-208
Price
19.95
19.95
21.99
19.95
19.95
19.95
19.95
Housing
608-1210-501
608-1210-502
608-1210-504
608-1210-505
608-1210-506
608-1210-508
608-1210-509
Price
35.99
35.99
35.99
35.99
35.99
35.99
35.99
Threaded for Chrysler
Lower K727
•Tools made to work with ultimate ball joints
. Needed to replace pins
• Comes with 1210-112
Machined to
press in IK6141
ball joint holder
608-9033-226
9.99
Description
Tool kit, wrench and hex key
Wrench only
Cap hex key only
Part Number
608-1891-103
608-1891-101
608-1891-102
Price
27.99
23.99
12.99
374-70030
15.99
692-80402
11.95
41
• More Performance for Your Dollar
• Designed to be strong and extremely wear resistant
• It’s available in 4-bolt, press-in and screw-in styles for all of the most popular racing applications
• Ultimate Low Friction Operation - Infinite Preload adjustment allows breakaway torque to be set as low as 0 ft. lbs.
• Completely smooth, bind-free operation
• Wear Resistant Design - Precision tolerance ball to race conformity results in even load distribution for unsurpassed wear resistance
• Precision ground 52100 bearing steel race ensures long life and ultra-smooth operation.
• On-the-Car Adjustability - Infinite preload adjustment. No need to remove the ball joint from the car for adjustment
• Self-Lubricating - Fully greasable enhanced by self-lubricating components to ensure smooth operation
• Multiple Stud Lengths Available - Various ball studs are available for easy geometry changes. Fine tune your roll center
• Owner Rebuildable - Rebuilding is simple. All parts replaceable at economical prices
Suspension • Ste
t er
e in
i g Co
omp
mponen
ne ts
t • Sus
uspe
penssion
• Precision of a spherical bearing with the misalignment range of a ball joint
• Completely rebuildable and may be adjusted to eliminate play
• Alloy steel ball studs are process coated for low friction
• Different length ball studs are available for geometry changes
• 32.25° Range of motion 14.25° more than a monoball ball joint
• Heavy duty options available
• Other styles and replacement parts are available
Bolt-in Style Upper Ball Joint
Common Application
Most Late Model strut upper and tubular spindles
1973-95 GM Truck, IMCA Modified and Street Stock
1971-85 Impala, 70-81 Camaro and 73-88 Chevelle
Stock Ball Joint
351-IK6024
351-IK6136
351-IK5208
Taper
1.5
2.0
2.0
With Alum Cap
Price
338-22300
74.99
338-22302
74.99
With Steel Cap
Price
338-22301S 81.99
338-22302S 81.99
Screw-In Ball Joint
Common Application
Fits all Screw-in upper and tubular spindles
Howe, Rayburn, GRT, & PC (727 housing w/6141 pin)
Large Chrysler Lower
Stock Ball Joint Taper
351-IK772
1.5
351-IK6141(pin) 2.0
351-IK727
2.0
Popular IMCA Modified (may have to ream spindle)
351-IK719
With Alum Cap
338-22320
338-22410
338-22412
338-22418
1.5
Price
75.99
75.99
74.99
69.99
With Steel Cap
Price
338-22320S 75.99
338-22412S 74.99
Press-In lower Ball Joint
Common Application
1971-85 Impala Howe, Rayburn, GRT, & PC
1971-85 Impala, 3/8” Raised roll center
73-88 Monte Carlo & Chevelle, and Mini-Stock
Popular IMCA Modified 64-72 Chevelle,67-69 Camaro
Stock Ball Joint
351-IK6141
351-IK6117
351-IK6145
351-IK5103
Taper
2.0
2.0
2.0
1.5
With Alum Cap
338-22413
338-22419
338-22420
338-22421
338-22429
Price
74.99
74.99
69.99
69.99
81.99
Upper Ball Joint Replacement Parts
Howe BJ
Std Stud
+.1 Stud
+.2 Stud
+.3 Stud
+.4 Stud
+.5 Stud
338-22330 338-22331 338-22332 338-22333 338-22334 338-22335
338-22300
338-22301
338-22350 338-22351 338-22352 338-22353 338-22354 338-22355
338-22302
338-22360 338-22361 338-22362 338-22363 338-22364 338-22365
338-22320
338-22330 338-22331 338-22332 338-22333 338-22334 338-22335
Lower Ball Joint Replacement Parts
Howe BJ
Std Stud
+.1 Stud
+.2 Stud
+.3 Stud
+.4 Stud
+.5 Stud
338-22430 338-22431 338-22432 338-22433 338-22434 338-22435
338-22410
338-22412
338-22440 338-22441 338-22442 338-22443 338-22444 338-22445
338-22413
338-22430 338-22431 338-22432 338-22433 338-22434 338-22435
338-22418
338-22451 338-22452 338-22453 338-22454 338-22455 338-22456
338-22419
338-22460 338-22461 338-22462 338-22463 338-22464 338-22465
338-22420
338-22470 338-22471 338-22472 338-22473 338-22474 338-22475
338-22421
338-22480 338-22481 338-22482 338-22483 338-22484 338-22485
Upper Ball Joint Replacement Parts
Howe BJ
Housing
Price
338-22300
338-223220 34.99
338-22301
338-223220 34.99
338-22302
338-223221 35.99
338-22320
338-22322 28.49
Lower Ball Joint Replacement Parts
Howe BJ
Housing
Price
338-22410
338-22417 35.99
338-22412
338-22417 35.99
338-22413
338-22490 35.99
338-22418
338-22322 28.99
338-22419
338-22492 35.99
338-22420
338-224170 35.99
338-22421
338-224906 35.99
42
Aluminum Cap
338-22321
338-22321
338-22321
338-22321
Aluminum Cap
338-22415
338-22415
338-22415
338-22321
338-22415
338-22321
338-22321
Price
17.99
17.99
17.99
17.99
Price
22.99
22.99
22.99
17.99
22.99
17.99
17.99
Steel Cap
338-22321S
338-22321S
338-22321S
338-22321S
Steel Cap
338-22415S
338-22415S
338-22415S
338-22321S
338-22415S
338-22321S
338-22321S
With Steel Cap
Price
338-22419S 81.99
338-22421S 74.99
Price
31.99
31.99
31.99
31.99
Price
31.99
31.99
31.99
31.99
31.99
31.99
31.99
+.75 Stud
+1.0” Stud
338-223375
**N/A**
**N/A**
338-223375
338-223310
**N/A**
**N/A**
338-223310
+.75 Stud
+1.0” Stud
**N/A**
**N/A**
**N/A**
**N/A**
**N/A**
**N/A**
**N/A**
338-224310
338-224410
338-224310
**N/A**
338-224610
**N/A**
**N/A**
Price
35.99
35.99
35.99
35.99
Price
35.99
35.99
35.99
35.99
35.99
35.99
35.99
Price
17.99
17.99
17.99
17.99
Price
22.99
22.99
22.99
17.99
22.99
17.99
17.99
374-70030
15.99
692-80402
11.95
Fax us 24hr at 262-783-6293
338-22399
• Great for screw-in
ball joints
• For precision & stock
ball joints
Description
Socket for Upper
Socket for Lower
6.99
Machined to
press in IK6141
ball joint holder
Part Number
Price
338-2152
338-2153
37.49
39.99
Checks ball joint pin to
make sure it is straight
Stock BJ
K727
K6141
K6024/K772
Part Number
• For 351-IK727
11.00
586-100-40727
• Slug is sold separate
• LS has is slotted for adjustment
• RS has 5/8” threaded mount
• 4” Drop
• Height is 7-3/4”
• Made in USA
Description
SS Spindle RH
SS Adjustable Spindle LH
SS Spindle Slug 0°/11°
Part Number
Price
338-347074
181.99
338-34707L4A 193.99
338-347DET02
9.00
• Stock Pinto/Mustang II spindle
• Uses stock bearings, rotors and calipers
• Stock height
• Heat treated forged steel
• IMCA Legal!
Part Number
1.5 Taper (7°)
Price
338-22500 11.79
338-22501 11.79
338-22502 11.79 338-2152
• For 351-IK719
• Small threaded lower
• Used in IMCA
Description
IMCA Pinto RS
IMCA Pinto LS
Threaded for large
Chrysler lower 351-IK727
2.0 Taper (10°)
K727 O.D.
2.0 Taper
K6141 I.D.
1.5 Taper
586-100-40719
19.49
These are specially designed for machine use featuring a
left helical right cutting design. They are available for 1.5”
per foot and 2.0” per foot tapers
Adapter sleeve adapts K6141 GM press-in lower ball
joint pin to K727 Chrysler screw-in ball joint pin
Howe BJ
22412
22410
22300/22320
338-22411
11.00
37.49
Description
1.5 Taper Reamer
2.0 Taper Reamer
Steel
Part Number
Price
338-84015
338-84020
94.00
94.00
• For 351-IK727
• For 351-IK727
586-100-40727-1 11.50
586-100-46141
10.00
• 9-1/4” LS & 10” RS Tall
• 3-1/2” drop
• 6-1/2” from lower ball joint to hub face
• Fits Fab offset and perimeter chassis
• LS has is slotted for adjustment
• RS has 5/8” threaded mount
• Made in USA
Description
XL Spindle RS
XL Spindle LS
Part Number
418-001-76-10
418-001-76-9
Price
169.99
169.99
• Uses stock bearings, rotors and calipers
• Stock GM Metric Spindle
• Heat treated steel
• NEW not reconditioned!
Price
747-910-34313R 114.99
747-910-34313L 114.99
Description
Metric Spindle LS
Metric Spindle RS
Spindle Saver (pr)
Part Number
111-810-0200
111-810-0201
747-910-34303
Price
94.99
94.99
14.99
43
Precision ball joint boots
are a universal fit, for all
styles of precision upper
and lower precision ball joints.
Suspension • Ste
t er
e in
i g Co
omp
mponen
ne ts
t • Sus
uspe
penssion
• 10-3/4” LS & 10-1/8” RS Tall
• Availbale with DL or SL bracket
• SL bracket accepts NDL calipers
• Fits most popular GRT cars
• Snout is for W-5 hubs
• Made in USA
• Black, Blue and Grey front
end spindles available
• Comes with SL brake bracket
• Fits most popular Rocket cars
• Snout is for W-5 hubs
• Made in USA
Description
“Black” Spindle
“Blue” & “Grey” Spindle
LS 10-3/4” Tall
RS 10-1/8” Tall
Price
661-PC3003L
661-PC3001L1
661-PC3003R 157.99
661-PC3001R1 192.99
Description
Spindle with DL bracket
Spindle with SL bracket
LS 10-3/4” Tall
Description
1.5 Taper 7° Spindle Reamer
2.0 Taper 10° Spindle Reamer
Part Number
160.00
160.00
5/8” Thread
Length
Application
Rack Inner Tie Rod
64-70 Chevelle Inner
64-70 Chevelle Outer
78-88 Monte Carlo Inner
78-88 Monte Carlo Outer
68-69 Camaro, 68 Nova
Thread
5/8-18
5/8-18LH
5/8-18
5/8-18LH
5/8-18
5/8-18
Length
7-3/4”
9”
9”
8-1/2”
8-1/2”
4”
• Comes with castle nut, cotter pin, lock
nut and shims: (1)1/8”, (2)1/4”, (1)3/8”
44
Price
94.00
94.00
• Direct OEM Replacement
• Greased and sealed
• Precision of a spherical bearing
• Misalignment range of a ball joint
• Completely rebuildable
• May be adjusted to eliminate play
• Alloy steel ball studs
• Process coated for low friction
Right Hand
Left Hand
**N/A**
338-23286
338-23285 77.00
338-23287 85.99
Price
338-23248
338-23247
338-23297
338-23298
Part Number
338-84015
338-84020
Price
586-50403BM
586-60403BM
Howe Quick Bump tie rod ends offer all of the
advantages of our precision tie rod ends plus the
ability to quickly and easily adjust the bump steer.
Easily rebuildable and adjustable to eliminate play. The alloy steel ball studs are
process coated for low friction and long wear. Quickbump tie rod ends eliminate
bump steer shims and offer 8° more misalignment than rod ends. Both studs are
threaded 5/8”x18 RH thread to screw directly into either the rack or spindle and
are held in position with a jam nut. Using a 3/8” allen wrench bump steer
adjustments can be made quickly and easily saving you valuable time
Tie Rod Assembly with
Application
With 5/8-18 x 1.5” Stud Rack end
With 5/8-18 x 3.0” Stud Spindle end
Description
Part Number
Tie Rod housing only 5/8-18 RH
Tie Rod housing only 5/8-18 LH
5/8-18 x 1.5” Stud only
5/8-18 x 3.0” Stud only
Price
If you’ve ever needed to ream a spindle you know how difficult
it can be. Standard reamers are only designed to be used by
hand and will fail quickly if used in a drill or other
machine. These are specially designed for machine
use featuring a left helical right cutting design.
They are available for 1.5” per foot and 2.0”
per foot tapers
• Fits Common Mastersbilt cars
• Comes with SL brake baracke
• Spindle fits W-5 hubs
• Made in USA
Description
RS with SL brake bracket
LS with SL brake bracket
RS 10-1/8” Tall
302-30399G
302-30400G 160.00
302-30399G-1 302-30400G-1 160.00
63.99
63.99
29.39
39.99
Price
170-808-950
21.99
Part Number
Price
351-IES370R
351-IES681N
351-IES333RL
351-IES2034RLT
351-IES2033RLT
351-IES381RL
1.750”
15.95
14.95
19.95
14.95
14.95
19.80
1.562”
3.625”
• Each bump steer bushing kit includes 2 each of the following bushings
.030”, .060”, .125”, .250” and .375” thick.
• Works with 808-950 Coleman stud.
170-808-900
10.99
Fax us 24hr at 262-783-6293
Drop is measured difference
between where grease zerk
screws into and bottom of
tapered end
“A”
Howe’s new billet idler solves the two common
complaints about OEM idlers, it is tough enough
to last and easy to adjust height for bump steer.
If it is damaged it can be rebuilt. Models are
available for the Camaro, Impala and Chevelle.
• Extra strong design
• Little to no friction
• Made in the USA
“B”
Application
“length”
Impala Idler Arm
5-1/4”
Chevelle Idler Arm
4-1/2”
Idler Arm Spacer kit
Idler Arm Chevelle Frame Mount
Drop
1-1/4”
0”
Part Number
338-23431
338-23428
338-32165
338-912340
Price
88.99
88.99
14.99
14.99
Application
“A”
68-72 Chevelle
2-3/8”
70-72 Monte Carlo
78-83 Chevelle
2-3/8”
78-88 Monte Carlo
“B”
5”
Drop
1/4”
IMCA
Yes
6-1/4”
1-1/2” No
Part Number
351-IK5143
Price
19.95
351-IK6187T 19.95
“A”
• 68-72 Chevelle
• Adapts modified frame to idler arm
“C”
338-912340
14.99
“B”
Application
“A”
“B”
“C”
69-72 GM Full Size 1”
5”
1/2”
600 Delphi, 700 Saginaw and fits DS749 center link
78-83 Chevelle
1-1/8” 6-1/4”
1-3/4”
78-88 Mone Carlo 525/605 GM Box
“B”
1-1/2” per
foot taper
Part Number
Price
747-910-32560 59.99
747-910-32552 39.99
“A”
Application
70-81 Camaro
Chevelle Modified
`
• Shim for clearance
• Little to no friction
• Includes grease zerks
• Fits pinto spindles
“A”
1-1/8”
1”
“B”
5”
5”
“Drop”
1/4”
0”
Part Number
Price
338-2349 85.99
338-2345 85.99
• For corrected bump steer on ‘68-72 Chevelle
frames using pinto spindles.
• Extra strong tubular design
“B”
“C”
“A”
Extra strong
tubular design
Application
“A”
“B”
“C”
IMCA
68-72 Chevelle 24”
15-1/2” 3-1/8” Yes
70-72 Monte Carlo
78-83 Chevelle 21-3/4” 12-7/8” 3-3/4” No
78-88 Monte Carlo
Part Number
Price
351-IDS749
39.99
351-IDS909
39.95
“B”
“C”
• Extreme Pressure Grease
• 400gm Cartridge (about 14.11oz)
“A”
Application
Chevelle Mod
“A”
”
“B”
“C”
19-1/4” ”
Part Number
338-233973
Price
169.99
374-70030
15.99
45
Idler Fame
mount
Suspension • Ste
t er
e in
i g Co
omp
mponen
ne ts
t • Sus
uspe
penssion
Stealth boxes are OEM Appearing with black finish and their
low price makes them the popular choice of IMCA
• Say good by to your quickener!!
• 8:1 Ratio
• 2 turns lock to lock
• Available in 2 valves
• 13/16”-36 spline
• 1-1/8” output
• -6 AN Fittings
• New internals
• 3 Bolt
• IMCA Legal
• 12:1 Ratio
• OEM Appearing
• Black finish
• 3 bolt
• Available in 2 valves
• 13/16”-36 spline
• 1-1/8” output
• -6 AN Fittings
• IMCA Legal
Description
.185 Valve 8:1 Ratio
Part Number
Price
778-208-08185
778-208-08210
Description
750.00
694.99
Part Number
016-2512B-220
016-2512B-235
• Fits most GM steering boxes
• -6 AN on opposite end
• Steel
Thread
16mm
18mm
5/8”
11/16”
Style
O-ring
O-ring
Inverted Flare
Inverted Flare
Box Application
1982 or Newer
1982 or Newer
1981 or Older
1981 or Older
Part Number
Price
802-37122
802-37123
802-37124
802-37125
9.99
9.99
9.99
9.99
19.99
374-50020
4.49
Sweet Mfg. rack and pinion units are made in the USA with
the finest available materials and each unit is hand assembled
and tested for quality assurance.
• OEM replacement boots
778-001-21040
This powerful brake &
parts cleaner quickly cuts
through grease and grime,
but it does not leave an
oily film. This fast drying
formula gets the job done
while using less spray
compared to watered
down cleaners.
• Exceptional low temp
flow reduces initial drag
• Fully synthetic formula
• Better thermal stability
for less pressure drop
as temperatures rises
• Offers high temperature
foam resistance
374-01306
Price
451.50
465.99
• Integrated servo
• Adjustable Rack Ends (std 5/8 threaded ava)
• 18-1/4” center to center
• Dual cylinder for smoother steering
• Proudly made in the USA!
12.99
Flex Lines
Dual Assist
Adjustable Ends
• Full synthetic fluid
• Prevent cavitation
• Reduced oxidation temperatures rises
• Compatible with all fluids
• Helps prevent steering fade
826-40-0510
9.15
Integrated Servo
Uses 5/8” Rod End
(Not Included)
3/4-30 Spline
(778-401-50615 U-Joint)
692-30404
46
10.99
418-032-13827
12.49
Description
4.0 Ratio, .220 servo, 5/8” threaded ends
4.0 Ratio, .220 servo, slotted rack ends
4.0 Ratio, .220 servo, 5/8” threaded ends
with RS adj rack center 18-1/4 to 19-1/4
Part Number
Price
778-005-93343-220 799.99
778-005-93345-220 973.99
778-005-93847-220 864.99
Fax us 24hr at 262-783-6293
• Integrated servo
• Adjustable Rack Ends (std 5/8 threaded ava)
Flex Lines
Dual Assist
Dual Assist
Available with adjustable
or 5/8” threaded ends
Adjustable Ends
3/4-30 Spline
(778-401-50615 U-Joint)
Uses 5/8” Rod End
(Not Included)
Integrated Servo
3/4-30 Spline
(778-401-50615 U-Joint)
Description
2.5 Ratio with .235 servo, 5/8” thrd ends
2.5 Ratio with .235 servo, slotted endss
3.0 Ratio with .235 servo, 5/8” thrd ends
3.0 Ratio with .235 servo, slotted ends
Part Number
Price
778-005-60343-235
778-005-60345-235
778-005-80343-235
778-005-80345-235
799.99
973.99
799.99
973.99
Uses 5/8” Rod End
(Not Included)
2.5 Steering Ratio
Rack with std 5/8”threaded ends
Rack with adjustable slotted ends
3.0 Steering Ratio
Rack with std 5/8”threaded ends
Rack with adjustable slotted ends
Part Number
Price
778-005-60343
778-005-60345
585.99
659.99
778-005-80343
778-005-80345
585.99
669.99
-6 AN Fittings
Sweet does not recomend the use of ATF in the steering
system, it will cause seal damage, they recommend
changing your fluid regularly
Aluminum mounting
clamp collar
NOT Included!!
• Helps reduce heat in your power steering system.
•Anti-foaming
• Full sythetic fluid
Description
1 Quart (32oz)
1 case (12 quarts)
• Weighs only 2.5 lbs
• Designed to work with sweet power racks
• -6 Steel fittings
Part Number
Price
778-301-30090
778-301-30091
14.99
169.99
Slotted for easy
adjustment
3/4-48 Spline
(778-401-50615 U-Joint)
3/4-48 Spline
(778-401-50610 U-Joint)
Description
Medium / Light .235 Servo
Medium .250 Servo
Aluminum mounting clamp collar
Seal Kit for “Top Seal”
Seal Kit for “Bottom Seal”
Part Number
Price
778-303-33235
778-303-33250
778-313-43055
778-312-42021
778-312-42022
282.49
282.99
25.99
5.99
5.99
• Fits dual pull cylinder Racks
• Ends are easily replaced
• Ends thread on to rack shaft
Adjustable end
Standard threaded end
Description
LH rack end threaded
RH rack end threaded
LH rack end slotted w/hardware
RH rack end slotted w/hardware
Hardware included
Part Number
778-001-21103
778-001-21104
778-001-21116
778-001-21117
Price
• Fits dual pull cylinder Racks
• Easy to replace
36.49
36.49
85.99
85.99
Description
Dual Cylinder
Cylinder Seal Kit
Part Number
778-301-30063
778-301-30067
Price
173.99
20.99
47
Suspension • Ste
t er
e in
i g Co
omp
mponen
ne ts
t • Sus
uspe
penssion
3/4-30 Spline
(778-401-50615 U-Joint)
Integrated Servo
Integrated Servo
3/4-30 Spline
(778-401-50615 U-Joint)
Black Anodized
Adjustable Ends
5/8” Threaded Ends
New larger assist cylinder
Flex Lines
Description
2.5 Ratio med servo 5/8” threaded ends
with RS adj rack center 18-1/4 to 19-1/4
Part Number
Price
Dual Assist
082-0314030813
082-0414030813
082-0713030813
849.99
849.99
849.99
Description
2.5 Ratio med servo 5/8” adjustable ends
082-0713070813
082-0813030813
879.99
849.99
Part Number
Price
082-0314030713
082-0414030713
082-0713030713
082-0813030713
899.99
899.99
899.99
899.99
-6 ORB
• Seal kit for dual assist rack cylinder
• Everything you need to re-seal your leaky
rack cylinder
082-7010710
• 3/4” - 30 spline input
• Ports for -6 ORB fittings
• Pinion sold separate
• Aluminum housing
3/4” - 30 spline
37.99
Description
Medium Servo 2.5 no pinion
Seal kit for Servo
• Converts standard dual assist
cylinder rack to adjustable end rack
• Includes all nessisary hardware,
shaft, adjustable ends and assist blocks
• Ends are black oxidized steel
48
17.99
435.73
• Includes adjusting bolt and spacers
• Ends are black oxidized steel
• Sold individually
082-7062011
Price
245.99
30.99
• OEM replacement boots
082-6000600
082-8111123
Part Number
082-7015002
082-7010720
125.99
• Shear-Stable viscosity
• Non-foaming
• Prevents wear & corrosion
• Mixes with all other fluids
082-6002020
11.99
Fax us 24hr at 262-783-6293
374-70030
15.99
692-80402
11.95
826-40-0510
• 3/8” thick
• Slotted holes
• Steel
• Used to correct bump steer spacing
• Eliminates the need to stack washers
• One piece construction adds ridgidity
• Hard anodized
• Lightweight billet aluminum
9.15
Slotted Holes
418-032-13827
Description
1/8” Spacer
1/4” Spacer
3/8” Spacer
1/2” Spacer
Part Number
Price
376-14710
376-14720
376-14730
376-14740
20.99
21.99
22.99
26.99
12.49
3/4-36 Spline
• 3/4” Shaft extension
• Lighweight
• Ridgid 3 bolt mount
• Billet aluminum housing
• Chevy 3/4-36 spline x 3/4” Shaft
• Made in the USA
8”
.5”
• Weighs only 2.5lbs
• 2 bolt mount
• Billet aluminum housing
• Compact
• Chevy 3/4-36 spline ends
• Made in the USA
22
3/4” Shaft
.5”
13
3/4-36 Spline
(Both Ends)
Description
1.5:1 Ratio 2 bolt Quickner
2:1 Ratio 2 bolt Quickner
Part Number
Price
170-22369
170-22370
113.99
113.99
Description
1.5:1 Ratio 3 bolt with 3/4” shaft extension
2:1 Ratio 3 bolt with 3/4” shaft extension
Part Number
Price
170-22080 154.99
170-22380 154.99
3/4-36 Spline
(Both Ends)
• Increased tooth contact for strength
• Input and output shafts are inline for
reduced gear load
• 2 bolt mount
• Weighs 2lbs
• Made in the USA
• Cast aluminum housing
• 2 bolt mount
• Weighs 3lbs
• Made in the USA
3/4-36 Spline
(Both Ends)
8”
338-522-B2
150.69
338-5220
150.69
49
Slotted Holes
• Universal
• Slotted holes
• Steel
Suspension • Ste
t er
e in
i g Co
omp
mponen
ne ts
t • Sus
uspe
penssion
A
• Black Oxidized
• Designed for racing
• No “Slop”
• Compact and lightweight
• Durable
• Impressive 32° of working angle
• Over 100 size/spline combinations
Side A Side B
3/4” Sm
3/4” Sm
3/4” Sm
3/4” Sm
3/4” Sm
3/4” Sm
3/4” Sm
3/4” Sm
3/4” Sm
3/4” Sm
3/4” Sm
3/4” Sm
5/8” Sm
3/4”-36
3/4” Sm
5/8” Sm
3/4” - 48
13/16” - 36
3/4” - 36
9-16” - 26
5/8” - 38
3/4”- 30
1” - 48
3/4” - “DD”
1” - “DD”
3/4” - 20
5/8” Sm
3/4”- 20
A
32° working angle
B
Common Application Part Number
Universal steering shaft
778-401-50606
778-401-50608
Sweet Rack
778-401-50610
Old Chevy power
778-401-50611
Chevy Man, Quickeners
778-401-50612
Pinto manual
778-401-50613
Chevy Manual
778-401-50614
Chevy Pwr, Appleton Pwr 778-401-50615
Chevy Column
778-401-50618
Universal stock shaft
778-401-50619
Universal stock shaft
778-401-50620
Column/WW Rack
778-401-50621
Universal shaft
778-401-50808
Sweet/WW Column
778-401-51221
Price
44.99
52.99
47.99
47.99
45.99
45.99
45.99
45.99
59.99
62.99
62.99
47.99
47.99
52.99
The bearing trunnion used in these u-joints is a one-piece
design of hardened chrome-vanadium tool steel. The
grease seals are high-durometer fluorocarbon o-rings in
compression against the end surfaces of the needle bearing
cups. These seals will resist sustained ovenlevel heat and will
retain the bearing grease under severe conditions, including
welding. Other design details include stainless steel truss-head
screws overlapping the bearing cups, and a pair of fine-thread
knurled set screws.
Side A Side B
Common Application
3/4” Sm
3/4” Sm
3/4” Sm
3/4” Sm
3/4” Sm
3/4” Sm
3/4” Sm
3/4” Sm
3/4”-20
3/4”-20
3/4”-20
3/4”-20
3/4”-20
Sweet Rack
Chevy Manual, Quickeners
Chevy Pwr, Appleton Pwr
Old Chevy power
Chevy Manual - Vega
Pinto manual
Column/WW Rack
3/4” Sm
3/4” - 48
3/4” - 36
3/4”- 30
13/16” - 36
5/8” - 38
9-16” - 26
3/4” - 20
3/4”- 48
3/4”- 36
3/4”- 30
13/16”- 36
3/4”- 20
B
Part Number
878-UA100
878-UA101
878-UA102
878-UA103
878-UA104
878-UA105
878-UA106
878-UA201
878-UA20101
878-UA20102
878-UA20103
878-UA20104
878-UA20201
Price
53.99
55.99
55.99
55.99
55.99
55.99
55.99
55.99
57.99
57.99
57.99
57.99
57.99
A
• All couplers are 3/4” smooth on
one side and splined on other
• Comes with set screw and lock nut
• Made from DOM tubing
• Designed for racing
• No “Slop”
• Compact and lightweight
• Durable
• 30° of working angle
B
Side A Side B
Common Application
3/4” Sm
3/4” Sm
3/4” Sm
3/4” Sm
Sweet Rack
Chevy Man, Quickeners
Chevy Pwr, Quickeners
3/4” Sm
3/4” - 48
3/4” - 36
3/4” - 30
Part Number
170-25447
170-25448
170-25899
170-27562
Description
Price
39.99
42.99
42.99
42.99
• No Sheer Pins
• Collapses 7”
• 29” end to end
• Comes with dust boot
Part Number
778-301-30100
778-301-30110
778-301-30120
778-301-30130
778-301-30140
778-301-30150
Price
11.99
11.99
11.99
11.99
11.99
11.99
• All adapters weld in end of SCA500 Column
• Precision machined
3/4-20 spline
(878-UA201 U-Joint)
50
3/4” Smooth x 3/4”- 48 spline
878-SCA500
129.99
Description
Fits 3/4” steering shaft (.510 ID)
1” Extension with 3/4”-20 spline
Part Number
878-ST501
878-ST2011
878-ST2012
878-ST2013
Price
7.99
13.99
13.99
14.99
Fax us 24hr at 262-783-6293
• Measured from the end of housing to beginning of collapsed shaft
• Telescoping safety steering column
• 8” of collapsibility
• Uses 401-50621 (3/4”-20 spline) u-joint
• Telescoping safety steering column
• Designed for the u-joint to be inside of the foot box
• Uses 401-50621 (3/4”-20 spline) u-joint
Application
Adjustment
Asphalt LM
22”-32”
GRT DLM
28”-34”
Rock DLM
32”-42”
Column Accessories
U-joint
3/4”SM x 3/4”-20
Replacement Support Bearing
Alum Pinch Collar (pair)
Part Number
Price
778-405-10310
778-405-10315
778-405-10317
269.99
331.99
285.99
778-401-50621
778-405-10369
778-405-10373
47.99
79.50
33.99
Part Number
Price
778-405-10001
778-405-10003
778-405-10006
778-405-10009
289.99
289.99
285.99
289.99
778-801-70030
778-401-50621
93.00
47.99
.757” Bore
3/4-16” Shank
Description
3/4”OD x .120 wall DOM (per foot)
Part Number
Price
164-75120D
3.35
• Oversized Bore .757”
• Billet aluminum
• Replaceable bearing
• 3 Bolt aluminum mounting flange
• Specificaly made for 3/4” steering shaft
Description
Aluminum oversized rod end
Steel oversized rod end
Part Number
Price
774-CM757
10.99
250-ALJM12757 22.86
.757” Bore
• Comes with bearing and mounting plates
• 2.75” mounting
2.7
5”
.757” Bore
23.99
774-SB204X757
• Lightweight yet strong
• Weighs only 1.2 pounds
• Monoball bearing accepts 3/4” shaft
• By loosening the clamp, the wheel
position can be easily adjusted.
Bracket mount
1-1/2” Tube
1-3/4” Tube
Description
NASCAR Column 18”-26”
Column Accessories
Quick Release Hub
3/4” Sm x 3/4”-20 u-joint
• 3/4-16 Shank
• Available in Alum and steel
• DOM tubing
• 3/4 OD x .120 wall
• Steel
• Sold by the running foot
• Can ship UPS up to 6’
860-WM102
Adjustable steering columns are required in all NASCAR Series
chassis. They are not only a safety feature, but an excellent way
to eliminate flex and binds in your steering shaft.
• Adjustable from drivers compartment
• Fits 1-3/4 tube
• Excepts 3/4” steering shaft
• Available with misalignment bearing
• Other styles available
• Single bolt to clamp to tube
Part Number
Price
338-91998
338-91997
50.89
50.89
Shaft mount style
Split bushing
Misalignment bearing
2.75”
13.00
Bracket mount
1-3/4” Tube
1-3/4” Tube
Swivels
Part Number
Price
376-13714
376-13720
94.99
95.99
51
This adjustable steering column comes complete with a 1-1/8”
oversized rod end that has a 3/4” thread to fit a steel mounting
bracket. Includes an aluminum quick release.
Suspension • Ste
t er
e in
i g Co
omp
mponen
ne ts
t • Sus
uspe
penssion
1-1/2” per
foot taper
Notched for
tubing
• Adjustable from drivers compartment
• Fits 1-3/4 tube
• Excepts 3/4” steering shaft
• Available with misalignment bearing
• Other styles available
• Single bolt to clamp to tube
Bracket length
Bracket mount
4.375” Long (2pcs)
1-3/4” Tube
7.375” Long (2pcs)
1-3/4” Tube
9.375” Long (2pcs)
1-3/4” Tube
Description
Sweet collapsible column mount
3/4” shaft mount with misalignment bearing
Description
7” mount
10” mount
Part Number
Price
9.99
15.99
Price
778-405-10210
778-405-10215
778-405-10220
55.00
60.00
65.00
Part Number
Price
778-405-10205
778-405-10240
• Clamp collar for 3/4” steering shaft
• Available in aluminum and steel
• 2 bolt style split collar
20.49
59.99
Description
3/4” Clamp collar aluminum
3/4” Clamp collar steel
• Made from aircraft aluminum
• Pin-less and spring loaded for
fast steering wheel removal
• Splined steel coupler welds to 3/4” steering shaft
• Tight tolerences ensure a tight fit
• Anodized black
• Proudly made in USA!
Description
Part Number
Quick Release assembly
111-811-0001
3/4” Hex Stub only
111-811-0002
Part Number
766-0017
014-30380
Price
59.99
24.99
Part Number
Price
586-100-2800
110-SP12F
8.95
6.99
• Uses roll pin for reliability
• Standard 3 bolt mount
• 360° Rim release
• Available for 3/4” steering shaft and
collapsible steering columns
Description
• Economically priced
• Push button release
• 3/4” or 5/8” adapter available
Description
Quick Release assembly 3/4”
Quick Release assembly 5/8”
Part Number
111-811-0003
111-811-0005
111-811-0004
111-811-0006
Price
21.99
24.99
14.99
14.99
Steel Coupler assembly for 3/4” steering shaft
Alum Coupler assembly for 3/4” steering shaft
Steel Coupler only
Aluminum Coupler only
Replacement weld on stub only
Dual spline adapter for adjustable column
Alum Coupler assembly for sweet column
Part Number
778-801-70001
778-801-70004
778-801-70006
778-801-70007
778-801-70008
778-801-70017
778-801-70031
Price
85.99
85.99
64.99
62.99
19.99
26.99
97.99
• Billet aluminum
• Lightweight aluminum
• Black Anodized
• Put your steering wheel on exactly
the same way each time
• Bolts under steering wheel and onto shaft
• Lightweight billet aluminum
• For 3/4” shaft
426-56700
52
40.99
Description
1/2” Spacer
” Spacer
1-1/2” Spacer
2” Spacer
Part Number
Price
376-13305
376-13310
376-13315
376-13320
17.99
18.99
19.99
20.99
Fax us 24hr at 262-783-6293
Diameter
13” with bumps
15” with bumps
15” Smooth grip
17” with bumps
Flat
Price
778-601-70131
778-601-70151
778-611-70151
778-601-70171
75.99
75.99
71.99
75.99
Dished
Price
778-601-70152 75.99
778-601-70172 75.99
Diameter
15” with bumps
15” Smooth grip
17” with bumps
17” Smooth grip
Part Number
Price
426-56801
426-56811
426-56820
426-56825
50.99
50.99
60.99
60.99
• Gives you more grip and comfort
• Helps make sure fatigue doesn’t set in
• 8 wraps increases the diameter 1/8”
• Lightweight aluminum steering wheel
• Available plain or powder coated black
• Flat or dished 15” wheel
• Large 1-1/4” grip
Size
15”
15”
15”
15”
Style
Flat
Flat
Dished
Dished
Finish
Plain
Black
Plain
Black
357-HT1X25299BK
Part Number
142-BBP-2711415F-P
142-BBP-2711415F-B
142-BBP-2711415D-P
142-BBP-2711415D-B
Price
74.99
74.99
74.99
74.99
6.99
• Holds steering wheel
• Billet Aluminum
• Available in 2 sizes
Description
1-1/2” Mount hook
1-3/4” Mount hook
Part Number
Price
426-22576
426-22577
15.99
15.99
We hope you never crash your car hard enough to hit your
head on the steering wheel. But just in case, think safety,
use this JOES Steering Wheel Pad.
• High density padding
• Protects you in a hard crash
• Black
376-13650
• Machined aluminum
• Reduces bracket clamp size
• Saves money over buying a new bracket
Description
Reduces clamp from 1-3/4” to 1-1/4”
34.99
• Cushions you from steering wheel
• Available in Black, Red and Blue
•Velcros to steering wheel
Description
Black steering wheel pad
Red steering wheel pad
Blue steering wheel pad
Part Number
Price
376-13000
376-13002
376-13003
7.95
7.95
7.95
• Cushions you from steering wheel
• Available in Black, Red and Blue
•Velcros to steering wheel
Part Number
Price
394-00001
394-00002
394-00003
12.99
15.99
15.99
Description
Black steering wheel pad
Red steering wheel pad
Blue steering wheel pad
Part Number
Price
394-00021
394-00022
394-00023
12.99
15.99
15.99
53
• Foam grip
• Larger grip
• Tough foam grip
• Black grip
• Standard grip
Suspension • Ste
t er
e in
i g Co
omp
mponen
ne ts
t • Sus
uspe
penssion
• 6” Aluminum V-belt pulley
• -10 inlet -6 pressure and -6 return
• Calibrated, tunable flow curve
• Spline-drive bolt-on pulleys
• 9,000rpm max pump speed
• 1600psi max pressure relief
• Self-centering snout for proper alignment
to dry-sump spud in positive drive
applications, minimizing shaft wear
• 9.6 cc High volume aluminum pump
• Made in USA
Description
Alum pump with alum V-belt pulley
6” Alum V-Belt Pulley for alum pump
Part Number
• -6 pressure and return
• 1600 psi max pressure relief
• 8 oz aluminum bolt on reservoir
• Eliminates inlet hose failure problems
• Made in USA
Price
388-KRC63201000 654.70
388-KRC20011000 62.99
• Self-centering snout for proper alignment
to dry-sump spud in positive drive
applications, minimizing shaft wear
• Aluminum lightweight pump
• Made in USA
Description
Cast Iron pump with alum V-belt pulley
6” Alum V-Belt Pulley for Iron pump
Cast Iron Pump Seal kit
Part Number
• 6061 aluminum 8 oz tank
• Replaces the -10 inlet fitting on pump
• Can eliminate inlet hose failure
• Cleaner layout under the hood
saving approximately 3 lbs. of weight.
54
388-KRC9131200
Price
Price
388-KRC50010000 169.99
388-KRC50100000 62.99
388-KRC51050000 13.79
Part Number
Part Number
388-KRC63201100 742.02
• 1600 psi max pressure relief
• 13.5 cc Super high volume cast iron pump
• 8 oz aluminum bolt on reservoir
• Eliminates inlet hose failure problems
• Made in USA
Description
Iron pump with alum V-belt pulley
Cast Iron Pump Seal kit
• Fits KRC Cast and Aluminum pump
• All pumps come with 2.11 gpm valve
• Made in USA
• 4.2”Aluminum Serpentine pulley
• Made in USA
Description
Pump w/ 4.2” Serp Pulley and Reservoir
Alum pump with 4.2” Serpentine pulley
4.2” Serpentine Pulley only
Description
Aluminum pump with alum V-belt pulley
Part Number
Price
388-KRC50010100 249.99
388-KRC51050000 13.79
Generally the more flow
the easier it is to steer, but
gives you less “feel”
GPM
Valve ID
Part Number
1.58
2.11
2.64
3.17
6
None
C
E
388-KRC25306000
388-KRC25308000
388-KRC25310000
388-KRC25312000
Price
19.99
18.49
19.99
19.99
Price
388-KRC63202100 689.99
388-KRC63202000 599.99
388-KRC20015000 54.99
Lightweight Aluminum Power Steering
Pump with built-in aluminum reservoir
holding a generous capacity of 18oz.
Available for rack and pinion or steering
box setups.
Bolts directly to pump
with o-ring seal
93.99
Description
Alum Pump & Alum Reservoir (No Pulley)
6” Alum V-Belt Pulley for above
Part Number
Price
378-PS-9008-AL-AR 327.99
378-PS-3106-B-6.0
63.99
Fax us 24hr at 262-783-6293
• 1100 PSI @ 1500rpm
• -10 inlet -6 pressure
• Available with steel or aluminum housing
• Tested and adjusted for correct
pressure and flow
• Made in the USA
• Available with steel or aluminum housing
• Plastic Reservoir included
• 1100 psi
• Vented cap
Description
Aluminum Combo pump
Steel Combo pump
Replacement Reservoir
Replacement Reservoir Cap
6” V-Belt Alum pulley only
High Flow
Description
Alum pump with alum V-belt pulley
Aluminum pump without pulley
Steel pump with Alum V-belt pulley
Steel pump without pulley
6” Aluminum V-Belt Pulley only
Price
016-804226P 289.99
016-802226P 225.99
016-960250
69.99
016-960190
10.99
016-980150
55.99
Price
229.99
207.99
210.99
185.99
34.99
• 3/8” Hex shaft driven
• Weighs only 2.5 lbs
• 3000 psi capability
• Accepts all popular 3/8” hex drive fuel
pumps off back of pump
• Can be mounted off most rear mount
dry sump pumps
• Tear drop timed port eliminates cavitation
• Made in the USA
• 1100 PSI @ 1500rpm
• Re-plated and all new internal parts
• Tested and adjusted for correct
pressure and flow
• Made in the USA
111-811-0025
Part Number
778-305-60231
778-305-60230
778-305-70231
778-305-70230
778-301-30020
Description
HPD Power Steering Pump
HPD Pump brg and Seal rebuild kit
139.99
Part Number
390-KSC1068-002
390-KSC1039B
Price
519.99
36.99
The all new KSE TandemX Pump is based upon the design of
its popular predecessor and is a highly
developed “two-in-one” high performance power
steering & fuel pump.
The all new KSE TandemX Pump is based upon the design
of its popular predecessor and is a
highly developed “two-in-one” high performance power
steering & fuel pump.
• Belt drive (pulley not included)
• Will simplify plumbing
• Provides performance and durability
• Utilizes a single shaft drive to operate both
power steering and fuel pumps
• Reduces mechanical efficiency loss
• Compact and is designed to fit almost
any racing application
• Made in the USA
• Hex drive
• Will simplify plumbing
• Provides performance and durability
• Utilizes a single shaft drive to operate both
power steering and fuel pumps
• Reduces mechanical efficiency loss
• Compact and is designed to fit almost
any racing application
• Made in the USA
Description
Tandem-X Pump with Belt drive
Tandem-X Pump rebuild kit
Part Number
390-KSC1064-002
390-KSC1077B
Part Number
Description
Tandem-X Pump with hex drive
Tandem-X Pump rebuild kit
Part Number
390-KSC1065-002
390-KSC1077B
Price
737.99
36.99
• While using a 40 tooth HTD drive pulley
• Available for 20 or 30 mm wide pulley
• Other belt style and sizes available
• 40 tooth HTD drive pulley
• Guides not included
• Available 20 or 30 mm wide
Description
40th - 20 mm wide
40th - 30 mm wide
Price
665.99
36.99
Price
378-BG610840S20M 39.99
378-BG610840S30M 39.99
Application
Bert/Brinn Belhousing
QMI Belhousing
Chevy to Crank (20th)
For 20mm Pulley
Price
066-6408M20 32.00
066-7208M20 33.00
066-8008M20 34.00
For 30mm Pulley
Price
066-6408M30 35.00
066-7208M30 33.99
55
Reservoir attached to
simplify plumbing
Suspension • Ste
t er
e in
i g Co
omp
mponen
ne ts
t • Sus
uspe
penssion
• Anti-foaming
• Anti-wear
• Anti-oxidation capabilities
• Higher viscosity index
• Minimizes assist fade and decreases heat generation
• “Cool” blue to help in identifying oil leak origins
390-KSM1086
KSE Tandem mounts work with all KSE Tandem
pumps and include necessary hardware.
Description
Bert/Brinn Mount
Chevy Mount
10.99
Part Number
Price
390-KSC1059 57.99
390-KSC1056 42.99
• Longer adjusting slot
• All Surfaces CNC machined
• Weight reduction pockets
• Aircraft grade hardware
• Anodized finish
• Fits stock GM Saganaw pump
• Comes with hardware
• Aluminum
• Anodized finish
• Made in the USA
Head Mount Bracket
Description
Head Mount Bracket
Block Mount Bracket
Block Mount Bracket
Part Number
Description
Head Mount Bracket
Block Mount Bracket
Price
778-325-30030
778-325-30034
Head Mount Bracket
52.99
46.99
Block Mount Bracket
Part Number
Price
388-KRC31410000 41.99
388-KRC31415000 35.99
• Longer adjusting slot
• Weight reduction pockets
• Aircraft grade hardware
• Anodized finish
• CNC machined
• Hardware included
• Anodized finish
• Made in the USA
Head Mount Bracket
Description
Head Mount Bracket
Bock Mount Bracket
Part Number
Block Mount Bracket
Price
111-811-0026
111-811-0027
Description
Part Number
Head Mount Bracket (NO spacers)
388-KRC31611000
Spacers only (not included with bracket) 388-KRC31613000
29.99
29.99
Price
45.99
21.49
2 machined grooves for
hose clamp mount
Reservoir and Cooler in 1!!
• Cools Power steering fluid
• Has screw on filter
• Comes with bracket
• -10 Outlet -6 Return
• Made in the USA
Mounting
bracket
• Cools Power steering fluid
• -6 in and out
• 2 mounting options
• Made in the USA
-10 Outlet and -6 Return
Slotted for square head bolt
and easy mounting
-6 AN inlet and outlet
Description
FTC Assembly
Replacement Filter
56
Part Number
082-7012760
082-7012780
Price
152.99
12.19
Replaceable filter
082-7012820
54.99
Fax us 24hr at 262-783-6293
• All pulleys are aluminum
• OEM pulleys for our P.S. Pumps
• Other styles and sizes are available
Pump Application
KRC Aluminum Pump
KRC Aluminum Pump
KRC Cast Iron Pump
KRC Cast Iron Pump
Sweet and stock GM
AGR and stock GM
Sweet AGR and stock GM
V-Belt
Square Cog
Drive
V-Belt
Serpentine
V-Belt
Serpentine
V-Belt
V-Belt
Square Cog
Part Number
• -6 Return
• -10 Feed to pump
• Alum tank with steel twist cap
• Roll cage mount
• Round tank allows return in any direction
• Internal “T” help keep fluid from foaming
• Made in USA
Price
388-KRC20011000
388-KRC20015000
388-KRC50100000
388-KRC50120000
778-301-30020
016-980150
170-DS-390-30
62.99
54.99
74.99
55.99
34.99
55.99
35.99
Description
Reservoir with bracket
Bracket Only
Replacement Cap
Description
Cap Only
Alum Neck with Cap
Part Number
586-100-15382
586-100-15383
170-900-2
Part Number
170-900-2
170-900-A
Price
8.99
16.99
Description
Reservoir with bracket
Reservoir with bracket and baffle
Bracket Only
Replacement Cap
Price
74.99
74.99
8.99
• Shear-Stable viscosity
• Non-foaming
• Prevents wear & corrosion
• Mixes with all other fluids
082-6002020
11.99
• Anti-foaming
• Anti-wear
• Anti-oxidation capabilities
• Higher viscosity index
• Minimizes assist fade and
decreases heat generation
• Helps prevent steering fade
• Helps prevent cavitation
• Reduced oxidation
temperatures rises
• Compatible with all fluids
390-KSM1086
692-30404
10.99
Price
96.99
17.99
8.99
• -6 Return
• Roll cage mount
• Round tank allows return in any direction
• No internal baffle
• Made in USA
• -6 Return
• LH and RH return available
• Fire wall mount
• Internal baffle helps keep fluid from foaming
• Made in USA
Description
LH Return tank
Return tank
Replacement Cap
Part Number
778-301-30050
778-301-30052
170-900-2
10.99
Part Number
586-100-15375BB
586-100-15375
586-100-15376
170-900-2
Price
62.40
69.95
10.49
8.99
• Exceptional low temp flow
• Fully synthetic formula
• Better thermal stability as
temperatures rises
• Offers high temp foam resistance
374-01306
19.99
• Helps reduce heat in your
power steering system.
•Anti-foaming
778-301-30090
14.99
57
Serpentine
Suspension • Ste
t er
e in
i g Co
omp
mponen
ne ts
t • Sus
uspe
penssion
• Extruded PTFE with smooth bore
• -100°F to +450°F
• High pressure hose (2500psi in -6)
• Superior fluid compatibility, Abrasion and corrosion resistant
• Sold by the running foot
• Stainless steel cover for excellent abrasion resistance
• Made in USA
Description
-6 AN PTFE Hi-Pressure
-8 AN PTFE Hi-Pressure
• Works with PTFE hose
• Reusable just replace
brass sleeve
Size
-6 AN
-8 AN
Part Number
050-FBM1103
050-FBM1104
Part Number
050-FBM1122
050-FBM1123
Part Number
Price
050-FBC0600
050-FBC0800
5.99
7.99
Description
-6 AN Hi-Pressure
-8 AN Hi-Pressure
• Works with PS hose
• Reusable
• No replacement parts just
un-srcew and reuse
brass sleeve
Price Size
-6 AN
-8 AN
6.99
9.99
brass sleeve
Size
-6 AN
-8 AN
• Elastomer smooth bore
• -45°F to +300°F
• High pressure hose (2250psi in -6)
• Your best choice for hi pressure applications
• Abrasion resistant polyester cover
• Made in USA
Part Number
050-FBM1112
050-FBM1113
Price Size
-6 AN
-8 AN
14.99
14.99
brass sleeve
• Srcews into SAE GM box
• 5/8-18 Invf
Angle
Price Straight
16.99 45°
16.99 90°
Part Number
050-FBM1138
050-FBM1141
050-FBM1144
Part Number
Price
58
Box Application
1982 or Newer
1982 or Newer
1981 or Older
1981 or Older
Price Size
-6 AN
-8 AN
6.99
7.99
Part Number
Price
050-FBM1386
050-FBM1384
12.99
15.99
• Reusable
un-srcew and reuse
• Srcews into SAE GM box
• 5/8-18 Invf
Size
-6 AN
-8 AN
Part Number
Price
050-FBM1389
050-FBM1387
14.99
14.99
• Biodegradable
• Citrus-based solvents
• Spot Remover
• Dissolving Paraffin Waxes
• Parts Degreaser and Cleaner
• Dissolves Glues and Adhesives
• Removes Ink Tar and
Bituminous Deposits
from Asphalt
• 16oz can
050-FBM3823 10.99
050-FBM3824 12.89
Style
O-ring
O-ring
Inverted Flare
Inverted Flare
Part Number
050-FBM1302
050-FBM1305
Price
11.99
15.09
15.99
• Fits most GM steering boxes
• -6 AN on opposite end
• Steel
Thread
16mm
18mm
5/8”
11/16”
Price
5.99
6.99
• Reusable
un-srcew and reuse
• Reusable
un-srcew and reuse
• For PTFE hose ends
• Replacement sleeve
Size
-6 Brass sleeve 5pk
-8 Brass sleeve 5pk
Part Number
050-FBG0600
050-FBG0800
Part Number
Price
802-37122
802-37123
802-37124
802-37125
9.99
9.99
9.99
9.99
717-0266
10.10
Size
-6 AN
Part Number
Price
050-FBM1392
12.99
• Foaming Degreaser
will not harm paint
• Just spray on and wipe off
• Safely remove tire rubber,
grease and oil
• Works great for
cleaning up shop
equipment and tools
374-50010
4.99
Fax us 24hr at 262-783-6293

Catalog `12 35-58.indd - Behling Racing Equipment

Transcription

Similar documents

Purosil Catalog 2013

Catalog `12 1-18.indd - Behling Racing Equipment

Catalog `12 146-158.indd - Behling Racing Equipment

Annual Report - Currier Museum of Art

annual report - Currier Museum of Art

Catalog `12 97-117.indd - Behling Racing Equipment