Vision Statement Corporate Profile

Transcription

Catalog No. 06INT
M I C R O W A V E F I L T E R C O M P A N Y, I N C.
6743 Kinne Street, East Syracuse, NY 13057
Toll Free: 800-448-1666 or 888-206-6610
International: 315-438-4700
Vision Statement
To provide unsurpassed Quality, Service and Value.
Corporate Profile
Company History and Products
MFC has been in the business of filter design and manufacture since 1967. Our dedicated staff
provides expertise in products such as headend channel deletion networks and components, bandpass
filters and diplexers for wireless and PCS applications, interference filters for C-Band installations,
along with a variety of designs for large OEM requirements. MFC offers a full range of high quality
products along with strong technical expertise and a customer friendly staff ready to meet your
requirements.
Customers
MFC serves a variety of customers from around the world. They include large CATV Multiple
System Operators, Cable System Installers and Operators, Direct Broadcast Satellite Systems,
Wireless Cable Multi-channel, Multi-point manufacturers and Distribution Systems.
Facilities
MFC's facility is conveniently located in Upstate New York (East Syracuse). The modern 40,000
square foot facility is equipped with state-of-the-art CNC machining equipment, ISO controlled
Q.A. instrumentation, design and simulation software, as well as test equipment for electrical and
environmental verification.
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
E-mail: [email protected] • Toll Free Phone: 1-888-206-6610 • Fax: 315-463-1467
Low Cost Single Channel Elimination Filter
Removes Low Band Cable Channels
14070 Channel Elimination Filter
Description:
The single channel elimination filter provides 50 dB attenuation (video-to-audio) of a designated 6 MHz wide television
channel (2 through 6), with minimal impact on adjacent channels, to allow reinsertion of new information without
interference.
Features:
• Cleanly rejects entire channel
• Passes adjacent channels
• Low cost
• Operating Bandwidth: 5-550 MHz
• Optional Operating Bandwidth: 1000 MHz
• Two year limited warranty
• 1 3/4" low profile rack mounting
• May be cascaded for multiple channel elimination
• Excellent frequency stability
Applications:
• Removal of selected cable channels
• Signal insertion of locally originated signals
• Insertion of converted UHF or VHF signals
Mechanical Specifications:
Dimensions: 19" L x 1 3/4" H x 6" D (Rack Mount)
Connectors: Type "F"
Ordering Information:
14070 - (Channel)
Specifications:
Operating Bandwidth:.............................................................5-550 MHz
Optional Operating Bandwidth:..............................................1000 MHz
Rejection:................................................................................50 dB Min (55 dB Typ)
Insertion Loss:.........................................................................2 dB Max
Adjacent Carrier Insertion Loss:.............................................7 dB Max
Input Return Loss:...................................................................16 dB (except adjacent channels)
Input Signal Level...................................................................+12 dBm Max
Operating Temperature:..........................................................0O C to 50O C
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
Analog (CATV) Channel Deletion Filters
3271 SUB & 3272 Series
Model Number
Sub/Low Band
2 MHz
10 dB
3271Sub T7-T14 Freq Range Adjacent Carrier
(MHz)
Insertion Loss (Max)
5.75-53.75
5 dB
W3272/R3272-2 to 6
3271 Sub
Typical Frequency Response of
3271Sub
54-88
4 dB
W3272/R3272-7 to 13 174-216
4 dB
W3272/R3272-23 to 36
216-300
5 dB
Channels Operating Band
>55 dB Typical Suppression
(Video to Audio)
T7 to T14
Insertion Loss
(Typical)
5-750*
(1-2) dB
2 to 6
5-750*
(1-2) dB
7 to 13
5-1000
(1-2) dB
23 to 36
5-1000
(1-2) dB
2 MHz
R3272 Rack Mount
10 dB
*Can be extended to 1 GHz with optional passband extender
module.
3272
W3272 Wall Mount
3271Sub-band Baseplate Dimensions: 6" x 2.25"
R3272 Dimensions: 19" L x 1.75" H x 6" D (Rack Mount)
W3272 Dimensions: 13.25" L x 1.75" H x 6.125" D (Wall Mount)
Connectors: 75 ohms - Type "F"
3271AB Series
Model Number
R3271 Rack Mount
2 MHz
Freq Range Adjacent Carrier
(MHz)
(R)3271ABM-95 to 99
90-120
3 dB
(R)3271ABM-14 to 22
120-174
3 dB
(R)3271ABY-37 to 61
300-450
5 dB
(R)3271ABY-62 to 158
450-1000
6 dB
Model Number Operating Band
3271
(R)3271ABM-95 to 99
5-1000
1-2 dB
(R)3271ABM-14 to 22
5-1000
1-2 dB
(R)3271ABY-37 to 61
5-1000
1-2 dB
(R)3271ABY-62 to 158
5-1000
1-2 dB
3271 Wall Mount
3271ABM, 3271ABH, 3271ABS, 3271ABY
Baseplate Wall Mount Dimensions: 9" x 5"
R3271ABM, R3271ABH, R3271ABS, R3271ABY
Rack Mount: 19" L x 3.5" H x 13" D
Connectors: 75 ohms - Type "F"
>55 dB Typical Suppression
(Video to Audio)
MI C R O W A V E
Insertion Loss
(Typical)
F I L T E R
C O M P A N Y ,
I N C .
Options For Channel Deletion Filters
• (S1 or S2) 12 volt activated switch. See page 13 Switchable Option (Model 8197)
• (P) 15 Amp AC/DC power bypass. See page 13 Power Passing Option (Model 7100)
• Weatherized Housing:
Option A (F connectors and no strand mount)
Option B (F connectors with strand mount)
Option C (Stinger entries and no strand mount)
Option D (Stinger entires with strand mount)
• Retuning to non-standard channel formats and other channel bandwidths
• Wall or Rack (R) mounting options
10500 Passband Extender
3271 with 10500 Passband Extender
Passband Extender
The Model 10500, 1 GHz module, is used to extend the passband of any channel
deletion filter or filter network to 1 GHz. Typical insertion loss is less than 1 dB.
The "extender" is custom tuned with your channel elimination network. The low
loss response across the extended band permits increased channel capacity to 1
GHz.
Specifications
(Passband extender only)
Passband loss:............................................................... 3 dB Max (1 dB Typical)
Mechanical Specifications
Connectors: 75 ohm - Type "F" - (female)
Weatherized housing available
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
Low Cost Single Channel Mass Descrambling Network
For Low Band Cable Channels
14579 Reprocessing Network - MDN
Channel #
(1-2)
Adj Carrier (1-2)
Insertion Loss Insertion Loss
(Typical)
(Typical)
Inserted Channel (4-2)
Insertion Loss
(Typical)
2 to 6
12 dB
11 dB
18 dB
14579 - Channel option 2 through 6
The MDN network consists of integrated adjacent channel deletion and bandpass filters along with the appropriate splitters
and directional taps for headend applications. The unit removes a scrambled channel, allows for descrambling, and facilitates the reinsertion of the same channel to the cable feed. The device splits the incoming signal selectively deleting only
the desired channel from the cable feed. It then utilizes an adjacent channel bandpass filter to permit a clean insertion of
the reprocessed channel back onto the cable system. All RF connections are internal to the unit with no additional wiring
or power requirements, permitting easy and quick installation.
Features:
• Clean insertion of new information
• Passband to 550 MHz
• Factory wired for quick installation
• Low insertion loss
Applications:
• MDU, motel, hotel, school, hospital and business
• Removal of selected channel
• Television reprocessing
Dimensions: 19" L x 1.75" H x 13" D (rack mount)
Connectors: Type F
Specifications:
Passbands.................. 5-550 MHz
Return Loss............... 15 dB Typical
14579 - (Channel)
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
Single TV Channel Reprocessing Network
MDN
MDN Series
The MDN network removes a selected channel from the incoming CATV feed
so it can be reprocessed and added back on line. This is done at the entry to a
multiple-dwelling unit (MDU), a motel, hotel, school, hospital or business. The
reprocessing can consist of batch descrambling, scrambling, channel conversion or a combination of these. MDN networks incorporate a channel deletion
filter corresponding to the channel to be reprocessed and an adjacent channel
bandpass filter. These filters delete the old channel information and insure clean
insertion of new information, respectively. All MDN units are delivered fully
wired except for scramblers, descramblers and converters. Available for channels 2-116.
*See pages 6 & 7 for channel
deletion filter specifications
(including upper passband
limits)
**See page 16 for bandpass
filter specifications
Channel #
(1-2) Passband
Insertion Loss
(Typical)
Adj Carrier (1-2)
Insertion Loss
(Typical)
Insertion Loss
(Typical)
2 to 6
12 dB
16 dB
10.5 dB
98, 99, 14 to 22 12 dB
15 dB
11.5 dB
7 to 13
12 dB
15 dB
13 dB
23 to 36
12 dB
16 dB
13 dB
37 to 61
12 dB
17 dB
13 dB
62 to 116
12 dB
18 dB
13 dB
Dimensions: 19" L x 3.5" H x 13" D
Connectors: 75 ohm - Type "F"
Note: In many cases these filter assemblies can be installed in 1 or 2 (RU) rack
chassis configurations.
MDN-(Channel)
Options (see page 13 for details):
S1 - 12 vdc off, MDN in line
S2 - 12 vdc off, MDN out of line
P - 15 Amp. AC/DC power bypass
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
Low Cost Single Channel CCTV Network
For Low Band Cable Channels
14580 Reprocessing Network - CCTV
Channel #
(1-2)
Adj Carrier (1-2)
(Typical)
(Typical)
Insertion Loss
(Typical)
2 to 6
1.5 dB
12.5 dB
8 dB
14580 - Channel option 2 through 6
The CCTV network utilizes a highly selective "brickwall" channel deletion filter to eliminate a selected cable channel.
This network incorporates a selective adjacent channel bandpass filter allowing for clean insertion of new programming
on the deleted channel, without affecting adjacent channels on the cable feed. All cable connections are internal to the unit
with no additional wiring required, permitting easy and quick installation.
Features:
• Allows channel reuse, with clean insertion of new information
(includes highly selective bandpass filter)
• Passband to 550 MHz
• Factory wired for quick installation
• Low insertion loss
Dimensions: 19" L x 1.75" H x 13" D (rack mount)
Connectors: Type F
Applications:
• New entertainment, instruction or security
• Removal of selected channel
• Channel reuse
Specifications:
Passbands.................. 5-550 MHz
Return Loss............... 15 dB Typical
14580 - (Channel)
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
Single Channel CCTV Network
Deletes A Channel for
Inserting New Programming
CCTV Channel Series
The CCTV coupler allows channel reuse for new entertainment, instruction or
security. A channel deletion filter deletes the old information. Your in-house
modulator inserts new information through a sharp bandpass filter to prevent
disturbance to adjacent channels. CCTV-(Channel) is available for any channel
2-116.
*See pages 6 & 7 for channel
deletion filter specifications
(including upper passband
limits)
**See page 16 for bandpass
filter specifications
Channel #
(1-2)
Adj Carrier (1-2)
(Typical)
(Typical)
Insertion Loss
(Typical)
2 to 6
1.5 dB
5.5 dB
12.5 dB
98, 99, 14 to 22
1.5 dB
4.5 dB
13.5 dB
7 to 13
1.5 dB
4.5 dB
15 dB
23 to 36
1.5 dB
5.5 dB
14.5 dB
37 to 61
1.5 dB
6.5 dB
14.5 dB
62 to 116
1.5 dB
7.5 dB
14.5 dB
Dimensions: 19" L x 3.5" H x 13" D
CCTV-(Channel)
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
Power Bypass and Block Options for Filters
Model 7100
Power Bypass Option: (Figure 1)
15 Amp AC/DC power bypass
Figure 1
Factory Installed
This option provides an AC/DC signal path around the filter
for further distribution in the system.
Model 7200
Power Block Option: (Figure 2)
15 Amp AC/DC power bypass
Figure 2
Factory Installed
This option stops the AC/DC signal from entering the filter
and beyond.
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
"Brickwall" Lowpass & Highpass Filters
Description:
The 6211LP/HP are a series of lowpass and highpass filters that are factory
assembled networks, consisting of channel deletion filters and custom designed
lowpass and highpass filters. The combination results in a "brickwall" filter
eliminating blocks of channels while preserving adjacent channels of interest.
The primary applications include deleting blocks of channels for re-insertion
purposes, while maintaining the integrity of close adjacent channels. These
networks allow for maximum use of existing cable spectrum. The operating
temperature for the 6211 series is from 13O C to 33O C.
10 MHz
10 dB
Any interface channel (2-116) may be customer specified.
Typical frequency response of 6211LP
6211LP/HP
Channels
2 to 36
37 to 53
54 to 76
77 to 80
81 to 116
Band Edge
5.5 dB
6.5 dB
7.5 dB
8.5 dB
9.5 dB
Stopband
Rejection (Typ)
55 dB
55 dB
55 dB
55 dB
55 dB
Baseplate Dimensions: 19" x 7" (up to channel 54)
19" x 10.5" (channels 55 and higher)
Other impedances and connectors can be supplied to order
6211LP or 6211HP
10 MHz
10 dB
Typical frequency response of 6211HP
Lowpass
6211LP - XX/YY
XX = Highest channel passed
YY = First channel in stopband
Highpass
6211HP - XX/YY
XX = Highest channel in stopband
YY = Lowest channel passed
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
Digital (QAM) "Brickwall" Lowpass & Highpass Filters
Model 19128L – Lowpass Series
Model 19128H – Highpass Series
10 MHz
10 dB
These filter series’ consist of a combination of “brickwall” channel deletion
components and lowpass (or highpass) components.
Each combination results in a “brickwall” lowpass (or highpass) filter assembly
for adjacent QAM channel operation.
Typical frequency response of 19128L
The primary application is to delete an existing group of contiguous channel
programs for the purpose of reinserting new programming (i.e. – cameras,
educational programming, etc.), while preserving adjacent QAM channel
programming.
Specifications:
Available Channels:................................... CATV Channels 2 - 158
Passband Loss:........................................... 4 - 6 dB Approx @ Passband Edge Channel
1 - 3 dB Typ in Remainder of Passband
Passband Flatness:..................................... 2 dB Typ; 3 dB Max @ Passband Edge Channel
Group Delay Variation:.............................. 400 nS Typ; 500 nS Max @ Passband Edge Channel
Stopband Attenuation:................................ 40 dB Min @ Stopband Edge Channel
50 dB Min in Remainder of Stopband
Operating Temperature Range:.................. +13ºC to +33ºC
Impedance:................................................. 75 ohms
Connectors:................................................ F-female
Rack Panel (or Rack Chassis) Mounted for Indoor Use
19128L or 19128H
10 MHz
10 dB
Lowpass
19128L-XX/YY where
XX = Passband Edge Channel
YY = Stopband Edge Channel
Highpass
19128H-XX/YY where
XX = Stopband Edge Channel
YY = Passband Edge Channel
Typical frequency response of 19128H
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
Special Deletion Networks
Contiguous & Non-contiguous
Multichannel Deletion Filters
10 MHz
10 dB
Typical frequency response of 7964
7964 (Contiguous) Series
Filter networks for suppressing an arbitrary number of contiguous channels are
supplied to order. For only a few channels, a series connection of individual
channel deletion filters is used. For a large number of contiguous channels, a
special network is used. It's components consist of a "Brickwall" lowpass and
highpass filter and a pair of specially designed bandsplitters. For an
intermediate number of contiguous channels, two single channel deletion filters
establish the "Brickwall" ends while a less selective network deletes the middle
of the specified stopband. Available for channels 2-116.
Specifications:
Rejection: 55 dB (typical) video-to-aural carrier
Loss at carriers adjacent to deleted channels: 5-7 dB (typical)
Specifications vary depending upon the number of channels being deleted and
their frequencies
Baseplate dimensions: varies based on number of channels being deleted
Typical 7964 & 6971 configuration
7964-XX/YY (Upper Passband)
XX - First channel to be deleted
YY - Last channel to be deleted
(Upper Passband) - Highest frequency to be passed
6971 (Non-Contiguous) Series
When channels are scattered in the TV spectrum, individual channel deletion
filters are connected in series. Where two or more of the channels cluster together, contiguous techniques are used to minimize the number of single channel
deletion filters.
5 MHz
10 dB
Typical frequency response of 6971
Specifications:
Rejection: 55 dB (typical) video-to-aural carrier
Loss at carriers adjacent to deleted channels: 5-7 dB (typical)
Specifications vary depending upon the number of channels being deleted and
their frequencies
Baseplate dimensions: varies based on number of channels being deleted
6971(N)-XX/YY/ZZ (Upper Passband)
N - Number of channels to be deleted
XX/YY/ZZ - Designates channels to be deleted
(An unlimited number of channels can be deleted)
(Upper Passband) - Highest frequency to be passed
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
QAM Multi-Channel Deletion Filter Networks
17900 Series (Contiguous) Multi-Channel Deletion Network
Deletes a block of consecutive QAM channels - for the purpose of reinserting
new programming within that block - without disrupting adjacent QAM (or
analog) channels performance.
Each deletion network is comprised of highly-versatile filter components.
This versatility results in deletion networks that use less filter components to
delete X number of channels vs. other multi-channel deletion networks on the
market that consist of "daisy-chained" X number of single channel deletion
filters.
Typical 5-Channel Configuration
Main advantages of using less filter components:
• Less cost to the customer.
• Superior performance - due to less component interaction.
(i.e.- Better Group Delay, Flatness, etc.)
Other features:
• Preserves all other QAM (or analog) channels from (5-1000) MHz.
• Available in any number of contiguous channel configurations.
• Single Panel Mount - Suitable for rack, wall or table installation.
• Fast Turnaround - Typically available to ship within 1 week ARO.
Product Nomenclature:
Model 17900-XX/YY
XX = First deleted channel / YY = Last deleted channel
If you need to delete two or more non-contiguous QAM channels, ask about our
17800 Series multi-channel deletion filter networks.
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
Single Digital Channel Bandpass Filters (Ultra-Selective)
3303D Series – CATV (low) / VHF
14584D Series – CATV (high) / UHF
3303D Channel Bandpass Filter
These bandpass filters provide superior single channel isolation - eliminating
virtually all potential sources of interference - while maintaining low channel
insertion loss.
Applications:
* Modulator Signal Conditioning for Reinsertion of Alternate Programming
* Local DTV Signal Isolation for CATV Headend Integration
3303D Specifications:
40
Available
Channels
2 - 6 (CATV / VHF) 7 - 13 (CATV / VHF)
14 - 22 (CATV)
23 - 36 (CATV)
95 - 99 (CATV)
Channel
3.0 dB [Max.]
4.5 dB [Max.] 4.0 dB [Max.]
5.0 dB [Max.]
3.5 dB [Max.]
Rejection
(from Channel Center)
40 dB (Typ.) ± 5 MHz
40 dB (Typ.) ± 5 MHz Mechanical Specifications:
Baseplate Dimensions: 10.25" x 1.50"
F-female Connectors (75 ohms)
Rack Mount Configuration – Optional
Analog Version Available Upon Request
Typical Frequency Response of 3303D
3303D-(CH)
(CH) = Channel #
14584D Bandpass Filter
Available ChannelRejection
Channels
Insertion Loss (Max) (from Channel Center)
37 to 53 (CATV) 3.0 dB [Max.]
35 dB (Min.) ± 5 MHz
54 to 125 (CATV)
5.0 dB [Max.] 35 dB (Min.) ± 5 MHz
14 to 51 (UHF) 5.0 dB [Max.]
35 dB (Min.) ± 5 MHz
Rack Chassis Configuration (1 RU) - Standard
Wall Mount Configuration - Optional
14584D-(CH)(X)
(CH) = Channel #
(X) = (C)ATV or (U)HF
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
Sub-Band Channel Bandpass Filters
3486 Bandpass Filters
3486 Series
Model 3486 rejects adjacent channels by cascading a sharp cut-off lowpass and
highpass filter.
Model 3486
Channels
Video-Aural
160 (T7)
3.0 dB 161 (T8)
3.0 dB 162 (T9)
3.0 dB 163 (T10)
3.0 dB
Return Loss: 14 dB Min
2 MHz
Adjacent Carrier
Rejection (Min)
30 dB
30 dB
30 dB
30 dB
10 dB
3486-(Channel #)
Typical Frequency Response of 3486
Sub-band
Notes:
Also available with 6 MHz BW for digital compatibility.
Enhanced version available for additional rejection of adjacent carriers.
3303 Series
The 3303 owes its high selectivity to its seven-section design.
Model 3303
Channels
Video-Aural
164 (T11)
4.0 dB 165 (T12)
4.0 dB 166 (T13)
4.0 dB 167 (T14)
4.0 dB Return Loss: 14 dB Min
Adjacent Carrier
Rejection (Min)
25 dB
25 dB
25 dB
25 dB
2 MHz
10 dB
Baseplate dimensions: 10.25" x 1.5"
3303-(Channel #)
Sub-band
Notes:
Also available with 6 MHz BW for digital compatibility.
Enhanced version available for additional rejection of adjacent carriers.
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
TVIF, FM & Digital Carrier Bandpass Filters
3303-TVIF
This filter passes the TVIF band, 41.25-45.75 MHz.
Specifications:
Video-Aural Carrier Insertion Loss:........................ 3 dB Max
Return Loss:............................................................. 14 dB Min
Rejection:................................................................. 25 dB Min at 39.75 MHz
25 dB Min at 47.25 MHz
Note: Also available with 6 MHz BW for digital compatibility.
3303-72/76
Isolates data carriers on cable systems.
2 MHz
Specifications:
Passband:.......................................... 72-76 MHz
Passband Insertion Loss:.................. 4 dB Max
Return Loss:..................................... 14 dB Min
Rejection:......................................... 15 dB Min at 71.25 MHz
20 dB Min at 77.25 MHz
10 dB
Typical Frequency Response of 3303-TVIF
Rack Mount Available Upon Request
Other models are also available with 2 MHz or 3 MHz bandwidths to isolate
digital carriers between channels 4 and 5.
3303FM-16 & 3303FM-20
Wideband FM filters.
3303FM Bandpass Filters
Specifications:
3303FM-163303FM-20
Passband:.................................................... 92-108 MHz
88-108 MHz
Insertion Loss:............................................ 1.5 dB Max
1.5 dB Max
Rejection at 87.75 MHz:............................ 25 dB Min
3 dB Max
Rejection at 83.25 MHz:............................ 50 dB Min
30 dB Typ
Rejection at 121.25 MHz:.......................... 50 dB Min
50 dB Typ
Return Loss:............................................... 14 dB Min
14 dB Min
E3303-FM20(U/L)
This filter is used for DMX radio distributed via fiber to isolate digital FM.
5 MHz
10 dB
3303FM
Specifications:
Passband:..................................... 88.5-107.9 MHz
Insertion Loss:............................. 5 dB Max
Stopbands:................................... 0-87 MHz & 109.25-450 MHz
Rejection:.................................... 40 dB Min
Baseplate Dimensions for 3303-FM Models: 10.25" x 1.5"
Baseplate Dimensions for E3303-FM 20(U/L): 19" x 5.25"
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
Single Digital Channel Bandpass Filters (Selective)
3160D Bandpass Filter
3160D Series - CATV (low) / VHF
4930D Series - CATV (high)
3278(4)D Series – CATV (higher) / UHF
These bandpass filters provide good single channel isolation - eliminating most
sources of interference - while maintaining low channel insertion loss.
Applications:
* Modulator Signal Conditioning for Reinsertion of Alternate Programming
* Local DTV Signal Isolation for CATV Headend Integration
Available
Channels
2 - 13 (CATV / VHF) 14 - 36 (CATV)
95 - 99 (CATV)
Channel Insertion Loss (Max.)
Rejection
2.0 dB [Max.]
2.0 dB [Max.]
2.0 dB [Max.]
25 dB (Typ.) ± 9MHz
Baseplate Dimensions: 6" x 2.25"
3160D-(CH)
(CH) = Channel #
4930D & 3278(4)D Hyperband
Semi-Adjacent Channel Bandpass
Filters
Available
Channels
37 to 61 (CATV) Channel Insertion Loss (Max.)
3.0 dB [Max.] Rejection
3.0 dB [Max.] 3.0 dB [Max.]
25 dB (Typ.) ± 9 MHz 3278(4)D
Specifications:
62 to 135 (CATV)
14 to 51 (UHF)
4930D-(CH)
3278(4)D-(CH)
(CH) = Channel #
Typical Frequency Response of 3278(4)D
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
UHF TV Channel Bandpass Filters
3278 UHF-TV Channel Bandpass Filter
3278 Series
Series 3278 UHF bandpass filters are available in two, three or four cavity models to provide three different configurations that are increasingly selective. They
are used for UHF processor cleanup or for preamp protection against overload
from strong off air interference. They are factory tuned to a specified channel,
but can be factory retuned to any channel from 450-890 MHz.
2 Cavity
3 Cavity
Video-Aural Insertion Loss: 1.0 dB (Max) 2.0 dB (Max)
25 dB rejection from Fo:
± 26 MHz
± 11 MHz
3278(2)
4 Cavity
3.0 dB (Max)
± 8 MHz
Model 3278(2) Baseplate Dimensions: 3.8" x 2.4"
50 ohm - Type N, SMA, BNC (optional)
3278(3)
3278(X)-(UHF Channel #)
X = the number of cavities
Special Filter Assemblies Of Two or More 3278 Filters
Are Also Available:
Diplexers (two channels) or multiplexers (three or more channels) split or combine channels using a low loss matching junction. Double bandpass filters (two
channels) or multi-bandpass filters (three or more channels) have only one input
and output connector and pass only the desired channels. Please contact us to
discuss your special requirement.
3278(4)
Note: Also available with 6 MHz BW for digital compatibility.
3278(2)
3278(3)
3278(4)
2 MHz
10 dB
3278
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
Narrow Bandpass Filters
3328 Narrow Bandpass Filters
3328 Series
Model 3328 has a 1 MHz bandwidth making it suitable for pilot carrier use or
for isolating a desired FM channel in the presence of strong unwanted FM receptions.
Specifications:
Frequency Option:*..............30-300 MHz
3 dB Bandwidth....................1 MHz Min
Insertion Loss:.......................5 dB Max
Rejection:..............................30 dB approximate ±3 MHz from center frequency
1 MHz
10 dB
3328-(Fo)
Fo = Center Frequency
*Customer Specified
3634 Narrow Bandpass Filters
3634 Custom Filter
Model 3634 filters utilize three helical resonators for extremely high Q. This
minimizes the insertion loss for narrow bandwidth applications and results in
high selectivity.
Specifications:
Center Frequency Option*:...........5-110 MHz
3 dB Bandwidth Option*:.............0.2 to 1 MHz ±10%
Rejection:......................................20 dB approximate ± (twice the 3 dB bandwidth)
2 MHz
10 dB
Baseplate dimensions: 10" x 4.5"
Connectors: 75 ohm - Type "F" - Other connector options available
3634-(Fo)/(BW)
BW = 3 dB Bandwidth
3634
* Customer Specified
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
FM Bandpass Filter
3634FM Tunable Bandpass Filters
3634FM Series
This filter can be tuned to any FM receive channel from 88 to 108 MHz by
means of three self-locking screwdriver adjustments. This filter is used for
isolating a desired FM channel in the presence of strong interference from
undesired signals. It can be shipped factory tuned to the customer's specified
frequency.
Specifications:
3 dB bandwidth:.................................................. 350 KHz ±10%
Insertion Loss at Tuned Frequency:.................... 5 dB Max
Rejection:............................................................ 20 dB Min ±800 KHz
Return Loss:........................................................ 14 dB Min
2 MHz
10 dB
Typical Frequency Response of 3634FM
3634FM-(Fo)
Fo = Center Frequency (Optional)
TV Channel Bandpass Filter
3376 Economical
VHF-TV Bandpass Filter
3376 Series
The small size of this 3 section filter makes it suitable for installation within
equipment or on congested panel layouts. It may be used for processor clean-up
or for filtering off air receptions. The 3376(5) contains five sections for increased
selectivity making it suitable for adjacent channel rejection.
Model 3376(3)
Channels
5 MHz
2 to 36
Model 3376(5)
Channels
2 to 6 (only)
Video-Aural
4.0 dB Video-Aural
4.0 dB
Semi Adj Carrier
Rejection (Min) 20 dB
Adjacent Carrier
Rejection (Min) 15 dB
10 dB
Typical Frequency Response of 3376(3)
3376(3)-(Channel #)
3376(5)-(Channel #)
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
Lowpass & Highpass Filters
3322 Headend Lowpass Filters
3322 Series
Lowpass filters pass the segment of the TV spectrum below a prescribed cut-off
frequency. The band segment above the cut-off frequency is suppressed. These
filters are AC/DC passing (500 mA Max).
Alternate “Cut-off Frequency” models are readily available upon request.
10 MHz
10 dB
3322
3378 Headend Highpass Filters
Model
3322-4.2-1*
3322-5
3322-(A)S
3322-50/55
3322-DD/GG(50)
3322-QQ/UU(50)
3322-CCC/III(50)
3322-NNN/TTT(50)
3322-647.75/673.25
3322-806/860
Passband (MHz)
0-4.2
0-5
5-46
5-50
5-323.75
5-401.75
5-473.75
5-539.75
5-647.75
5-806
Insertion Loss
at Cut Off (Max)
4.5 dB
4.5 dB
3.0 dB
3.0 dB 3.0 dB 3.5 dB
4.0 dB
4.0 dB 4.0 dB 4.0 dB Stopband
(MHz)
4.5-1000
6-600
55-450
55-750
337.25-1000
421.25-1000
505.25-1000
571.25-1000
673.25-1000
860-1000
Stopband
Rejection (Min)
30 dB
40 dB
40 dB
50 dB
50 dB
50 dB
50 dB
50 dB
50 dB
40 dB
*Custom units can be ordered in a delay equalized version.
3378 Series
Highpass filters pass frequencies above the cut-off frequency, and suppress
lower frequencies. Highpass filters are not AC/DC passing.
Alternate “Cut-off Frequency” models are readily available upon request.
10 MHz
10 dB
Model
Passband (MHz)
Insertion Loss
Stopband Stopband
at Cut Off (Max) (MHz)
Rejection (Min)
3378-4.2/4.5
4.5-10
4.5 dB 0-4.2 30 dB
3378-4.5/5
5-100
4.5 dB 0-4.5
40 dB
3378-BB/EE(50)
331.25-750
3.0 dB 0-311.75
50 dB
3378-SS/XX(50)
439.25-750
3.0 dB 0-409.75
50 dB
3378-469.25/511.25
511.25-750
4.0 dB
0-469.25
50 dB
3378-550/600(30)
600-750
3.0 dB
0-550
30 dB
3378-607.75/643.25(30) 643.25-890
4.0 dB
0-607.75
30 dB
3378-U
415-1000
4.0 dB 0-375
40 dB
3378-500/550(50)
550-750
4.0 dB 0-500
50 dB
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
Lowpass & Highpass Filters For Fiber Communications
10366 Lowpass Filters
10366 Series
These filters isolate bands below the designated cut-off frequency before they
are combined for fiber runs. The passband is defined as 50 MHz to any cut-off
frequency up to 600 MHz.
Specifications:
Frequency Cut-off Option:......50-600 MHz
Insertion Loss:.........................4 dB Max at Fc (1 dB typ)
Return Loss:............................14 dB Min (16 dB typ)
Ripple:.....................................±0.25 dB
Delay Variation:......................20 ns Max
(Cut-off frequency -4.5 MHz)
Rejection:................................7 dB approximate at cut-off frequency +6 MHz
20 dB approximate at cut-off frequency +12 MHz
30 dB min at cut-off frequency +18 MHz to
1000 MHz
50 MHz
10 dB
10366
10365 Highpass Filters
10366-(Fc)
Fc = cut-off frequency
10365 Series
These filters isolate bands above the designated cut-off frequency before they are
combined for fiber runs. Passes from cut-off frequency (Fc) to 750 MHz.
Specifications:
Frequency Cut-off Option (Fc):.....50-750 MHz
Insertion Loss:................................4 dB Max at Fc (1 dB typ)
Return Loss:...................................14 dB Min (16 dB typ)
Ripple:............................................±0.25 dB
Delay Variation:.............................20 ns Max
(Cut-off frequency + 4.5 MHz)
Rejection:.......................................7 dB approximate at cut-off frequency -6 MHz
20 dB approximate at cut-off frequency -12 MHz
30 dB min at cut-off frequency, -18 MHz down to
50 MHz
30 MHz
10 dB
10365
10365-(Fc)
Fc = cut-off frequency
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
Tunable Notch Filters
6367 Single Cavity
6367 Series
Model 6367 is easily tuned through its full frequency range. A second control allows adjusting the 3 dB bandwidth over a wide range. The adjustable
bandwidth feature of these filters allows suppression of an unwanted carrier with
minimum impact on adjacent, desired frequencies.
Cascade It For A Deeper Notch
For spot frequency applications, two or three identical units may be cascaded to
produce a notch twice or three times as deep with the same 3 dB bandwidth. Be
sure to complete the model number by inserting the desired bandwidth.
50 Ohm 75 Ohm Notch Depth Notch Depth Height
Model #
(dB)**
(dB)**
(L-inches)
6367-0 25
25
4.500
6367-1 30
33
4.500
6367-2 23
26
4.500
6367-3 20
23
4.500
6367-4
20
23
6.750
6367-5 13
16
3.875
**With 3 dB bandwidth adjusted to 3 MHz
2 MHz
10 dB
Tuning
Range**
(MHz)
22-35
30-50
50-108
108-216
216-450
450-900
Baseplate Dimensions: 2" x 2" (for single cavity)
Connectors: Standard: 75 ohm-Type F or 50 ohm-BNC
Optional: 50 ohm-SMA or 50 ohm-Type N
(X)(Y)6367-(Fo)/(BW3)
(X) - designates the connector type
Connectors: 50 ohm -BNC (B)
SMA (S)
Type N (N)
75 ohm - Type F (F)
(Y) - designates number of cavities
Cavities: (S) Single
(D) Double
(T) Triple
(Fo) - designates the notch frequency (MHz)
(BW3) - designates the 3 dB bandwidth (MHz)
Note: Orders for double and triple cavity 6367's must specify
notch frequency and 3 dB bandwidth.
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
Narrow Notch Filters
6556 Custom Built To Frequency
6556 Series
These notch filters are cut to your specified frequency (Fo). The 6556 can be
used to notch out an undesired carrier or to notch out Terrestrial Interference in
the block band of your headend TVRO. They are fine tunable and are available
as one, two or three cavity assemblies to give the notch loss required.
Specifications:
Notch Frequency Option (Fo):......... 900-1450 MHz
3 dB Bandwidth Option:.................. 1-5 MHz
(3 MHz Standard)
Notch Loss:...................................... 16 dB Min for 3 dB BW of 3 MHz
Baseplate Dimensions: 2" x 2" (for single cavity)
Connectors: Standard: 75 ohm - Type F or 50 ohm - BNC
Optional: 50 ohm - SMA or 50 ohm - Type N
1 MHz
10 dB
Typical notch loss for one, two and three
cavity assemblies for 3 dB bandwidth =
3 MHz.
(X)(Y)6556-(Fo)/(BW3)
(X) - designates the connector type
Connectors: 50 ohm - BNC (B)
SMA (S)
Type N (N)
75 ohm -Type F (F)
(Y) - designates number of cavities
Cavities: (S) Single
(D) Double
(T) Triple
(Fo) - designates the notch frequency (MHz)
(BW3) - designates the 3 dB bandwidth (MHz)
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
Multichannel Notch Filter
3367 Wideband Notch Filter
3367 Series
These filters suppress wide, contiguous bands within the VHF spectrum. They
suppress several channels to block viewing or for insertion of new programming
where a guardband is allowed. These units are AC/DC passing (500 mA Max).
10 MHz
10 dB
Model
Stopband (MHz)
Rejection
(Min)
Passband (MHz)
Lower
Upper
3367-2/6
54-88
50 dB
0-47.75
108-750
4 dB
3367-5/6
76-88
50 dB
0-54
108-750
4 dB
3367A-5
77-82
50 dB
0-71.75
88-750
4 dB
3367-FM
88-108
40 dB
0-83.25
115.25-550
4 dB
3367-FMC
93-108
30 dB
0-88
116.25-750
4 dB
3367-103/107
103-107
50 dB
0-93
117-400
4 dB
3367-A/E
121.25-145.25
45 dB
0-108
151.25-750
4 dB
3367-A/I
121.25-169.25
45 dB
0-108
175.25-420
4 dB
3367-B/G
127.25-157.25
50 dB
0-108
175.25-750
4 dB
3367-C/G
133.25-157.25
50 dB
0-108
175.25-750
4 dB
3367-C/H
133.25-163.25
50 dB
0-121.25
175.25-750
4 dB
3367-7/13
175.25-211.25
45 dB
0-167.75
223.25-750
4 dB
3367-K/N
223.25-241.25
40 dB
0-215.75
251.95-750
4 dB
3367-L/U
229-283
40 dB
0-216
301-500
4 dB
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
Insertion
Loss (Max)
VHF Tunable Traps
3468 Tunable Trap
3468 Series
Series 3468 suppress interference or reduce spurious carriers. They are easy to
tune with two self-locking screwdriver adjustments. (There is only one tuning
adjustment for the 3468-FMS.) They are housed in a seamless steel case sealed
against moisture. The traps can be experimentally adjusted to reduce out-of-band
interference whose frequency may not be precisely known. Each tuning screw
controls the frequency of a separate, sharp notch which may be used independently or synchronously to give the notch and bandwidth shown. For a nominal
extra charge, units can be tuned and marked to specified frequency.
1 MHz
10 dB
3468
3469 Tunable Sound Carrier Trap
Model
3468-Sub/Lo
3468-Lo/1
3468-Lo/2
3468-FMS
3468-FM
3468-Mid
3468-High
3468-Super
3468-Hyp1
Tuning
Range (MHz)
38-54
54-64
64-88
88-100
88-108
120-174
174-216
216-300
300-400
Notch (Min)
25 dB
25 dB
25 dB
12 dB
25 dB
25 dB
25 dB
25 dB
25 dB
3469 Series
Series 3469 are sound carrier traps used to reduce sound carrier levels. These
are narrow band notch filters which are tunable with a self-locking screwdriver
slot. Controlled sound reduction with minimum impact on color is achieved by
tuning into the sound carrier from a higher frequency (clockwise slot rotation.)
The 3469 can be factory preset to customer specified frequency.
Tuning
Notch Model
Range (MHz)
(Min)
3469-2/6
54-88
12dB
3469-Mid
120-174
12dB
3469-7/13
174-216
12dB
3469-Super
174-300
12dB
5 MHz
10 dB
3dB BW (MHz)
Nominal ± 3.0
± 1.0
± 1.5
± 0.5
± 2.0
± 6.0
± 6.0
± 6.0
± 6.0
3 dB BW (MHz)
Nominal
± 2.0
± 2.0
± 2.0
± 2.0
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
Bandsplitters/Combiners
3329 Cable Headend Bandsplitters
3329 Series
A bandsplitter separates a frequency spectrum into a low band and a high band.
It can also be used to combine these high and low bands to a common output.
Splitters are AC/DC passing on the low band side only.
10 MHz
10 dB
3329
Series 3329 broadband cable bandsplitters include a model for almost any
CATV or LAN application and reflect a design capability spanning baseband
(4.2 MHz) to UHF (890 MHz). We will gladly quote your specifications for
your special system or application.
Passband (MHz)
Insertion
Mutual
Model
Low
High
Loss (Max)
Isolation (Min)
3329-51.5(25)
3329-51.5(40)
3329-42/54(750)
3329-42/54(1000)
3329-88/102
3329-98
3329-130
3329-186/222
3329-M/S
3329-260/300
0-48
0-48
5-42
5-42
5-88
5-88
5-110
5-186
5-174
50-260
54-450
54-450
54-750
54-1000
102-750
108-300
170-450
222-550
216-420
300-550
3.0 dB
3.0 dB
3.0 dB
3.0 dB
3.0 dB
3.0 dB
3.0 dB
3.0 dB
3.0 dB
3.0 dB
25 dB
40 dB
30 dB
30 dB
30 dB
25 dB
30 dB
40 dB
30 dB
30 dB
Baseplate Dimensions: 6.125" x 2.25" for models 3329-VB, 3329-42/54 (750),
3329-42/54 (1000) & 3329-51.5(40)
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
Sub-band Diplexer For Cable Modems & Cable
Simulators
11194 Sub-band Diplexer
11194 Series
The Model 11194 Sub-band diplexer is used by cable systems to divide the frequency spectrum for Internet access/local area network (LAN) and cable television service.
Specifications:
Passband:............................... 5-42 MHz
54-750 MHz
Passband Insertion Loss:....... 1 dB Typ
Group Delay:......................... 30 nanoseconds Max over first 6 MHz of each
band edge
15 nanoseconds Max over any other 6 MHz band
edge
Isolation:............................... 30 dB Min
9 MHz
10 dB
PC mount with "F" connector on common output
Other connector options available upon request
Dimensions: 2.5" x 1.2" x .8"
11649 Cable Simulator
11649 Series
The Model 11649 simulates a 200 foot length of RG-59 cable. Its compact
design is convenient for bench top testing.
Specifications:
Passband Insertion Loss:............................................... 5 dB at 50 MHz Max
20 dB at 750 MHz Max
Other Amplitude Equalizers Available:
•Cable Equalizers
•Amplitude Tilt Equalizers
•Fixed Attenuators
Connectors: 75 ohm - Type "F" - Male/Female
Dimensions: 4.0" x 1.5" x 1.0"
70 MHz
10 dB
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
Special Application Filters
8488B Bandpass Filter
8488B Series
The Model 8488B Bandpass Filter is used with CATV test equipment to isolate
frequencies.
Specifications:
Center Frequency Option:..................50-750 MHz
Insertion Loss:....................................3 dB Max
Ripple:................................................0.2 dB Max center frequency ±1.5 MHz
Rejection:...........................................25 dB Min
±6 MHz from center frequency
Base Dimensions: Length varies with frequency
Connectors: 50 ohm - SMA (Female)
8488B-(Center Frequency)
2 MHz
10 dB
Typical Frequency Response of 8488B
10351 Bandpass Filter
10351 Series
The Model 10351-(Fo) is used to isolate the DMX band with loss of 1 dB typical
and 2 dB maximum.
Specifications:
Center Frequency Option:..................300-550 MHz
1 dB Bandwidth:................................18 MHz Min
40 dB Min:.........................................±30 MHz from center frequency
Baseplate Dimensions: Length varies with frequency
10351 - (Fo)
4 MHz
10 dB
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
5891 UHF Trap
5891 Series
The Model 5891 is installed at the off-air antenna to prevent pre-amplifier overload from strong UHF.
Specifications:
Frequency Range.......................................................... 470-806 MHz
Notch Depth.................................................................. 20 dB Nominal
3 dB Bandwidth............................................................ 40 MHz Max
Dimensions: 4" x 1.5"
5891-(Channel #)
15 MHz
10 dB
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
TVRO Interference Filters
7893D Series
The Series 7893D C-Band bandpass filter is installed between a TVRO feedhorn
and the LNA or LNB to suppress strong out-of-band interference caused by
marine or airport radar systems. Coastal and marine navigational radar
frequencies (2.9-3.65 GHz) are just below the TVRO band and frequently
wipe-out transponders 1-5 in TVRO's installed near harbors. The airport altimeter band (4.25-4.40 GHz) will affect channels 22-24 at TVRO sites near airports.
The model 7893D interference filter operates at RF before down conversion.
This prevents the generation of undesirable mixer products and receiver "desensitization" due to strong out of band signals.
7893D mounted between antenna feed &
LNA (both Vertical & Horizontal Polarization)
5 MHz
10 dB
Typical Response Curve of 7893D
7893D Suppresses Radar interference
Specifications:
Passband:.................................3.7-4.2 GHz
Insertion Loss:.........................0.4 dB Typ at Fc
0.5 dB roll off at band edge
VSWR:....................................1.92:1 Typ
Group Delay:...........................Less than 8 ns Typ
Rejection:
23 dB Min............................3.65/4.25 GHz
50 dB Min............................3.55/4.35 GHz
60 dB Min............................3.50/4.40 GHz
Dimensions:............................ 5 3/4" L x 2 3/4" H x 3 7/8" D
Weight..................................... 2.60 lbs
Flanges*:................................. CPR-229G, CPR-229F
* Half gasket is supplied with each model
Features:
• Economical Price
• Quick Delivery
• Less than 6 inches long
• Low Differential Group Delay
• Low Insertion Loss
• Other Frequency Bands Available Upon Request (Including International)
• Highly Selective
Models are available for the following frequency bands:
(Inquire for availability)
3400/3700
3400/4200
3600/4100
3600/4200
3740/4160
Note: With low insertion loss and minimal group delay variation, the 7893D
is ideal for digital applications.
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
TVRO Interference Filters
For Multifeed Applications
13961 Interference filter
13961 Series
The Series 13961 waveguide bandpass filter is specifically designed for use in
multifeed antenna applications. It virtually eliminates interference caused by navigational communications (radar) of commercial and military aircraft, as well as
coastal and marine vessels operating at frequencies above and below the C-band.
The unit is installed between the LNA or LNB and the feedhorn. This lightweight,
low profile filter is ideal for multifeed applications which require side-by-side
placement of filters (adequate radome clearance is required). Since the unit does
the filtering at the C-band frequencies, LNA and
LNB overload is prevented and overall picture quality is improved.
5 MHz
10 dB
Typical Response Curve of 13961
Specifications:
Passband:............................... 3.7-4.2 GHz
Insertion Loss:....................... 0.5 dB typical at center frequency
0.75 dB roll-off at band edge
VSWR:.................................. 1.92:1 Typ
Group Delay:......................... Less than 8 ns typical
Rejection:
25 dB typical...................... 3.65/4.25 GHz
60 dB minimum................. 3.55/4.35 GHz
70 dB minimum................. 3.50/4.40 GHz
Dimensions:.......................... 5 3/4"L x 2 3/4"H x 3 7/8"D
Weight................................... 1.3 lbs
Flanges*................................ CPR-229G, CPR-229F
*Half gasket is supplied with each model
Features:
• Quick Delivery
• Lightweight, Low Profile
• Ideal for Digital Applications (Low Differential Group Delay)
• Low Insertion Loss
• High Interference Rejection
• Other Frequency Bands Available Upon Request (Including International)
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
Filters for C-Band Microwave
3.7-4.2 GHz Tunable Notch Filters
5531 Double
Notch
Insert in LNADownconverter
Cable
5501
Single
Notch
Dial is marked with channel numbers and the 24
potential TI carriers. Identifies and suppresses TI carriers before there is any conversion. The 5531 suppresses two carriers, or produces a single 30 dB notch.
Notches are identical to those of fixed multiple notch
filters (below). Mount these permanently before the
downconverter or use them diagnostically to specify
the frequencies of a multiple notch filter.
Tunable 3.7-4.2 GHz
Type N (Female) Connectors
AC/DC Passing
Channel Calibrated
Notch Loss: 20 dB Typical
3 dB Bandwidth: 4.5 MHz Typical
Multiple Notch Filters
Insert in LNADownconverter
Cable
Insert Between
Feedhorn and
LNB
Resonators
Per Carrier
Series
Number
15
30
40
One
Two
Three
3966A-** or 3966ALNA-**
5045A-** or 5045ALNA-**
4168A-** or 4168ALNA-**
**Add the Number of TI Carriers To Be Suppressed
3966A-6
5045A-3
4168A-2
Notch Loss: 15 dB
3 dB Bandwidth
Approx. 5 MHz Typical
AC/DC Passing
Type N Connectors, 50 Ohms
Suppression
(dB)
Available with up to 6 resonators, each notching 15
dB. 1, 2 or 3 notches are synch tuned to produce 15
dB, 30 dB or 40 dB notches as shown in the model
table above.
3966ALNA-6
5045ALNA-3
4168ALNA-2
CPR-229
Flanges
Tunable Preselector
5693
The two independent tuning dials are channel calibrated. Set both dials to the
desired channel to pass that channel only. The unit is AC/DC passing with
type N, 50 ohm connectors. Tuned 3 dB bandwidth is approximately 25 MHz
with 20 dB discrimination at approximately ±40 MHz.
Bandpass Filters
N Connector
AC/DC Passing
4352 For LNA Systems
SINGLE TRANSPONDER BANDPASS FILTERS
Insert in LNA converter
cable to suppress out-ofband interference: common
carrier frequencies at 2
GHz, 6 GHz and other
frequencies. Loss 3.7-4.2
GHz less than 1 dB.
25 dB minimum suppression 3.4 GHz & Below 4.4
GHz & Above
MI C R O W A V E
Channel Preselectors For Noisy Environments
3740W-*
CPR-229
Flanges
*Add Transponder Number
F I L T E R
3740C-*
AC/DC Passing
N Connectors
50 Ohms
Availability: Any transponder 1-24
3 dB Bandwidth: 30 MHz
25 dB Rejection: ±30 MHz (from Fo)
Mid-Channel Loss: 1 dB Maximum
C O M P A N Y ,
I N C .
Special Applications
Satcom Transmit/Reject Filters
Series 12086
The series 12086 is a family of transmit rejection filters specifically addressing
the SATCOM (C-band) market. The device is installed between the antenna and
the LNA in the receive segment of satellite earth terminals. It is also used in Cband transceiver applications to isolate up-link and down-link signals.
The unit offers extremely low loss, typically less than 0.04 dB on the receive
signals, while providing a high degree of transmit rejection, ranging from 50 to
80 dB, depending upon the model. The construction of these units is 100% dip
brazed aluminum with a military grade chromate finish. This allows for years of
high performance operation. Optional paint and label configurations are available for OEM requirements. All units come standard with WR-229 grooved
flanges, with alternate configurations available upon request.
Model
Waveguide
Size
Frequency
(GHz)
VSWR
Reject (GHz)
(Max)
Attenuation
(Min)
12086-1
12086XR-1
WR-229
WR-229
3.7 - 4.2
3.7 - 4.2
0.04 dB
0.04 dB
1.15:1
1.25:1
5.925 - 6.425
5.925 - 6.425
50 dB
80 dB
12086-2
12086XR-2
WR-229
WR-229
3.625 - 4.2
3.625 - 4.2
0.04 dB
0.04 dB
1.15:1
1.25:1
5.850 - 6.425
5.850 - 6.425
70 dB
80 dB
12086-3
12086XR-3
WR-229
WR-229
3.4 - 4.2
3.4 - 4.2
0.04 dB
0.04 dB
1.25:1
1.25:1
5.825 - 6.725
5.825 - 6.725
70 dB
80 dB
Location of Potential 4 GHz Interfering Carriers
Center Frequency**
Transponder
1-(3720) MHz
2-(3740)
3-(3760)
4-(3780)
5-(3800)
6-(3820)
7-(3840)
8-(3860)
9-(3880)
10-(3900)
11-(3920)
12-(3940)
Possible
TI Carrier
3710, 3730 MHz
3730, 3750
3750, 3770
3770, 3790
3790, 3810
3810, 3830
3830, 3850
3850, 3870
3870, 3890
3890, 3910
3910, 3930
3930, 3950
Center Frequency**
Transponder
13-(3960) MHz
14-(3980)
15-(4000)
16-(4020)
17-(4040)
18-(4060)
19-(4080) 20-(4100)
21-(4120)
22-(4140)
23-(4160)
24-(4180)
Possible
TI Carrier
3950, 3970 MHz
3970, 3990
3990, 4010
4010, 4030
4030, 4050
4050, 4070
4070, 4090
4090, 4110
4110, 4130
4130, 4150
4150, 4170
4170, 4190
** SATCOM/COMSTAR
24 Transponder Satellites
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
IF Filters
Filters for Second (or Final) IF
75 Ohms, Type F Connectors, Cypher Compatible
Notch filters in the final IF stage suppress light to medium TI,
and will often cure heavy TI, including intermittent "wipeouts." 4 GHz TI‑carriers downconvert to ±10 MHz from the
final IF center frequency and are suppressed with notch filters
tuned to these IF frequencies. Single frequency series 6367
notch filters are available for all IF bands in current use. Correspondingly, series 4616 tunable, switchable filter assemblies
contain both notches. For the popular 70 MHz IF band, low
cost, fixed-tuned notches are available for 60 MHz & 80 MHz
(5KVseries).
Tunable
Insert specific IF interference frequency (*): Offset 10 MHz from IF
for pretuned notch. Notch loss shown
for 3 MHz bandwidth.
If you want to tune the filter
yourself order:
CYPHER COMPATIBLE INTERFERENCE TRAPS
Switchable
15 dB Notch 3 MHz BW3
4616-(*)
70 to 140 MHz
230 to 700 MHz
4616 contains two switchable traps:
one at +10 MHz and one at -10 MHz relative to IF center frequency.
Fixed
Tuned
Model
Tunable
Notch (dB)
F6367-250-108 26
F6367-3108-216 23
F6367-4216-450 23
F6367-5450-900 16
(3 dB Bandwidth adjustable 1 to 5 MHz)
F6367-(*)(3)
Notches for other IF
70 to 612 MHz
4616U-(*)
*Insert IF Frequency
Notches for 70 MHz IF
5KV-80
5KV-60
5KVD-60/80
50 dB Notch, 4 MHz BW3
Bandpass Filters
75 Ohms, Type F Connectors
Switchable In-Out
Fixed
3771-15(*)
45, 70 MHz
(*) Insert IF Frequency
3278-15-(*)
360 to 700 MHz
4612-15(*)
45 to 150 MHz
4612U-15-(*)
230 to 700 MHz
IF 3 dB bandwidth, 15 MHz minimum for
half-transponder reception or to boost weak
signal above noise.
3160-15(*)
130 to 300 MHz
MI C R O W A V E
Loss at center frequency 3 dB maximum.
F I L T E R
C O M P A N Y ,
I N C .
Blockband Filters
75 Ohm, Type F Connectors, AC/DC Passing, Cypher Compatible
Single Receiver Notch Filters
These notch filters tune the entire blockband to suppress TI while removing
minimum signal bandwidth. They are intended for single receiver TVROs.
They install in the LNB-receiver cable.
8976
Single
Turn
Models
Model
Block (MHz)
8976
8976-2
3 dB
Bandwidth*
900-1750
Notch*
Loss
15 dB
3 MHz
Multi-Turn Tuning
900-1750
25 dB
6 MHz
Multi-Turn Tuning
(*Approximately)
8976-2
Remarks
All Models AC/DC Passing
TI is cleared by tuning the notch to mid-channel (blanks the picture). Then
search slowly right and then left until TI drops to low level. Then fine tune for
optimum condition. 8976-2 has two independent notches for double loss or two
carriers (±10 MHz).
Multiple Notch Filters
These filters are used for multiple receiver TVRO's and are placed before the
splitter so that they clear TI for all subsequent receivers.
5316
Model
Block (MHz)
5316
5381
5696
900-1450
400-950
270-770
5381
Notch*
Loss
18 dB
18 dB
18 dB
(*Approximately)
5696
3 dB
Bandwidth*
3 MHz
3 MHz
3 MHz
Remarks
6 Tunable Lockable
Notches
These multiple notch filters make it unnecessary to retune the filter after each
channel change. The 6 independent tunable notches have locking provisions.
Tune out up to 6 TI carriers at one time and lock the adjustments.
Tunable Preselectors
For noisy environments or weak signal conditions, preselection of the channel
reduces the noise level. 30 MHz & 15 MHz bandwidths for full or half
transponder channels in the 900-1750 MHz blockband, respectively.
8398F
Adjustable Bandpass
Model
Selectivity*
8398F-15
8398F-30
20 dB ±17 MHz
20 dB ± 34 MHz
(*Approximately)
Loss*
(Max)
1.0 dB
0.5 dB
3 dB
Bandwidth*
15 MHz
30 MHz
The channel is tuned by adjusting the three cavities to the same channel. The
8398 requires a socket wrench (discourages curiosity "tweeking").
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
Blockband Filters
Bandpass Filters
1187DC Bandpass Filter
The 11871DC is installed between the downconverter and receiver in C-band
TVRO systems to remove mild to moderate out-of-band interference.
Passband
(MHz)
950-1450
11871DC
Insertion Loss
(Typical)
5 dB
Stopband
(MHz)
850-900
Rejection
(Typical)
30 dB
DC Passing
Typical Frequency Response of 11871DC
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
Uplink/Downlink Filters & Diplexers
For Commercial & Military Bands
9349, 9350 & 14560 Series
Models 9349, 9350 and 14560 are complementary filters used to isolate the
receive (downlink) and transmit (uplink) bands, providing suppression of any
interference these bands may cause to each other. Each filter passes the full allocated downlink and uplink frequency bands while offering a high level
of isolation from each other. In addition to offering the necessary level of rejection, they maintain a low insertion loss and an excellent VSWR over the full
operating band, facilitating minimal impact on system operation.
Model #
Passband (GHz)
Loss dB Stopband (Max.)
(GHz)
Reject Power VSWR
(dB)
(Watts)
Ku Bandpass Filters Models 9349 & 9350
200 MHz
10 dB
9349
9350
11.70-12.20
0.5
Ku-band downlink
14.00-14.50
0.5
Ku-band uplink
14.00-14.50
55
Ku-band uplink
11.70-12.20
60
Ku-band downlink
1
1.25:1
500
1.25:1
14.0-14.5
Ku-band uplink
N/A
1.20:1
Ku Bandstop Filter Model 14560
14560
14510 Diplexer
10.70-12.75
0.5
Ku-band downlink
70
9349 & 9350 Dimensions: 4.5"L x 1.5"H approximately
14560 Dimensions: 2.5"L x 1.5"H approximately
14510 Series
The model 14510 diplexer is used to combine the downlink and uplink bands to
allow for simultaneous transmit and receive operation. Each portion of the diplexer has integrated bandpass filters, matched for optimal system performance.
By combining the individual bandpass filters into a single diplexer, only a single
waveguide run on the transmit tower is required, reducing cost and improving
signal quality.
Diplexer Model 14510
Passband
Insertion Loss
VSWR
Isolation
500 MHz
10 dB
Uplink
14.0-14.5 GHz
0.35 dB Max
1.375:1 Min
80 dB Min
Downlink
11.7-12.2 GHz
0.35 dB Max
1.35:1 Min
80 dB Min
Dimensions: 10.75"L x 1.5"H
Common Options:
Units are made of WR75 waveguide and come standard with cover flanges. Each
unit can be custom built for single channel or partial satellite bands,
with connectors and mechanical configurations designed to meet customer requirements. Temperature compensated models are also available, where outdoor
applications are necessary.
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
CARS Band Filters 12.7-13.2 GHz
3740 Series
The 3740 series contains a filter for each channel in 7 groups of CARS band
channel allocations, as well as, wideband models for portions of the entire
CARS band. Either waveguide flange (W3740) or coaxial (SMA) (C3740) input-output connectors are available. Filters with special bandwidths or selectivity are available on special order. WR75 copper waveguide is standard construction. For a greater degree of temperature stability, silver plated Invar construction is also available upon request.
Standard Channel Bandpass Filters
20 MHz
10 dB
Chnl
Group
FM A
FM B
C
D
E
F
FM K
Insertion Loss 1 dB BW
Modelat Fo (Max)
(MHz)
3740A 4.0 dB
27 Min.
3740B 4.0 dB
27 Min.
3740C 6.0 dB
8 Min.
3740D 6.0 dB
8 Min.
3740E 6.0 dB
8 Min.
3740F 6.0 dB
8 Min.
3740K 5.0 dB
13 Min.
30 dB (Min)
Rejection
±40 MHz
±40 MHz
±25 MHz
±25 MHz
±25 MHz
±25 MHz
±25 MHz
Length
SMA 6.5" 6.5"
5.0"
5.0"
5.0"
5.0"
6.5"
(Approx)
Flanges
5.0"
5.0"
4.0"
4.0"
4.0"
4.0"
5.5"
X 3740-(Fo)(BW)(T)
X - designates connector type. C for coaxial SMA female connectors or W
for waveguide flange.
(Fo) - designates center frequency
(BW) - designates 3 dB bandwidth
(T) - designates temperature compensated unit
4535 Notch Filter
4535 Series
These notch filters are supplied to your specified 3 dB bandwidth (BW3) and
notch loss (Ao) and are available with waveguide cover flanges (W4535) or coaxial connectors (C4535). They are available in one, three or five section designs to
provide a wide array of bandwidth/notch loss combinations. For a greater degree
of temperature stability, silver plated Invar construction is also available upon
request.
25 MHz
10 dB
Body Construction: WR75 Waveguide
Input/Output: Cover flanges or SMA female coaxial connectors.
X 4535-(Fo)(BW)(T)
X - designates connector type. C for coaxial SMA female connectors or W
for flange.
(Fo) - designates center frequency
(BW) - designates 3 dB bandwidth
(T) - designates temperature compensated unit
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
12 &18 GHz AML Microwave Bandpass Filters
Bandpass For Transmit & Receive
8019, 9086, 10417 & 10330 Series
These bandpass filters provide excellent out-of-band suppression with low
loss for the 12 & 18 GHz bands. The receive filters, models 8019 and 10417,
provide low loss and a symmetrical rejection response for interference free
reception and improved signal to noise ratios. The transmit filters, models 9086
and 10330, are enhanced to provide additional attenuation for local oscillator
interference. Plated Invar construction provides low loss and temperature stability. A notch filter can be custom made to place additional attenuation at any spot
frequency.
8019
12 GHz
Model No.:
Passband (GHz):
Insertion Loss:
@ Center Frequency:
@ Band edges (Relative to Fo):
VSWR:
Rejection (typical):
30 dB bandwidth (MHz)
80 dB Notch
9086
ReceiveTransmit
8019 9086
12.7-13.2
12.7-13.2
1.5 dB Max
1.0 dB Max
1.5:1 Max
1.5 dB Max
1.0 dB Max
1.5:1 Max
850
----
----
---700
@12.646
18 GHz
Model No.:
Passband (GHz):
Insertion Loss:
@ Center Frequency:
@ Band edges:
VSWR:
Rejection (typical):
80 dB Notch
10330
100 MHz
10 dB
ReceiveTransmit
10417
10330
18.142-18.574 18.142-18.574
1.0 dB Max
2.5 dB Max
1.5:1 Max
1.0 dB Max
2.5 dB Max
1.5:1 Max
625
----
----
---700
@18.088 GHz
8019 Dimensions: 8"L x 1.6"H approx
10417 Dimensions: 7.5"L x 1.4"H approx
10330 Dimensions: 10"L x 1.4"H approx
9086 Dimensions: 13.3"L x 1.6"H approx
Connectors: 50 ohms - Type "SMA"
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
Fastrap
Traps for TV Channel Security and Interference Suppression
The "Fastrap" (Fast Delivery) Series Includes:
• Single Channel Negative Traps
• Band Suppression Filters for Trapping Multiple Contiguous Channels
• Lowpass and Highpass Tiering Filters
• Special Subscriber Multichannel Networks
• Traps & Filters for Eliminating Interference in Cable Television Systems Caused by:
- Paging Transmitters
- Mobile Radio
- Citizen Band (CB) Radio
- FM Broadcasts
- TV Stations
The "Fastrap" Series
"Fastrap" Applications:
• CATV, MATV & SMATV Systems
• Hospitals & Nursing Homes
• Private Video Systems in Institutions & Businesses
• Motels, Hotels & Apartments
• LAN (Local Area Networks)
Negative Trapping For Channel Security
5KV Negative Traps
These weatherproofed, temperature stable traps block an unauthorized viewer
and can also be used at off-air antenna terminals to suppress strong adjacent
channel interference to desired channel reception. Traps are stocked for standard U.S. TV channels, but can be retuned to a specific frequency upon request.
5KV Series
Typical Response
2 MHz
10 dB
5KV Negative Traps
Channel 2 to 6
Channel A-2 to I
Channel 7 to 13
Channel J to P
Channel Q to W
Channel AA to OO
Channel PP to WW
Notch
Depth
65 dB
65 dB
65 dB
65 dB
65 dB
65 dB
65 dB
Lower
Aural
5.0 dB
8.0 dB
10.0 dB
14.0 dB
20.0 dB
30.0 dB
16.0 dB
Upper
Video
1.0 dB
1.2 dB
1.5 dB
1.5 dB
2.5 dB
7.0 dB
3.0 dB
Upper Passband
& Loss dB
1.5 @ 500
1.5 @ 600
1.5 @ 600
1.0 @ 600
1.0 @ 600
1.0 @ 600
1.0 @ 600
Typical Frequency Response of 5KV
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
Special Traps Available
• Double and Triple Negatives 5KVD & 5KVT
Standard negative traps permanently joined for security for "all or nothing" Pay TV options.
• Combined Video/Audio 5KV2S2
Less lower sound impact than the negative series, where both video and sound trapping is desired.
• Special Frequency Trap 5KV-(MHz)
We retune the nearest standard video trap to your specified frequency to be installed at off-air antennas or in network to suppress interference.
• Sound Trap 5KS
Next higher video traps tuned down to specific sound frequency used for parental mandated sound trapping.
• FM Carrier Trap 5KFM
Traps a specified frequency (88-108 MHz). Installed on off-air FM antenna to suppress strong station overloading on all other stations.
• Positive (Decoding) Trap 5KVP
Note: This trap is available to CATV systems, only. It removes the jamming carriers and restores the video and audio to the subscriber of the paid premium channel.
Sleeves
F Connector Sleeve 5000SF
5" Sleeve (#5000SS4)
F Connector Sleeve 5000SF
TAP
7.5" Sleeve (#5000SS6)
TAP
The trap is inserted into the sleeve and spun onto the female connector of the tap (or wall plug) using a special wrench
which has a spanner feature. A shorter sleeve (5000SF) is dropped over the trap's female connector and the drop cable is
attached using the special wrench. The trap cannot be removed without the special wrench.
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
Low Cost Tiering Lowpass & Highpass Filters
5KLP Low Cost Tiering Lowpass Filters
5KLP Series
These tubular, weatherized lowpass filters are low cost alternatives to the 3322
headend series where higher passband loss is acceptable. Their resistance to
moisture and temperature extremes makes them suitable for pole mounting.
These filters are AC passing (500 milliamps).
10 MHz
10 dB
Typical Frequency Response of 5KLP
Model
5KLP-60
5KLP-66
5KLP-72
5KLP-82
5KLP-88
5KLP-108
5KLP-174
5KLP-216
5KLP-245
5KLP-300
5KLP-380
5KLP-450(8)
5KLP-468(8)
5KLP-474(8)
5KLP-550(8)
5KLP-576(8)
5KLP-675
5KLP-750(8)
Insertion Loss (Typical)
3.0 dB 5.0 dB
5.0 dB
5.0 dB 5.0 dB
3.0 dB 5.0 dB
6.0 dB 7.0 dB
8.0 dB 6.0 dB 3.0 dB 5.0 dB 5.0 dB
5.0 dB
4.0 dB
5.0 dB
5.0 dB
Passband (MHz)
5-60 5-66 5-72
5-82
5-87.75
5-108 5-173.75
5-215.75 5-245.75 5-299.75
5-383.75
5-449.75
5-467.75
5-473.75
5-551.75
5-575.75
5-675
5-749.75
Stopband
(MHz)
67.25 - 800
71.75 - 900
77.25 - 1,000
89.50 - 940
97.25 - 1,000
121.25 - 1,000
187.25 - 1,000
229.25 - 1,000
259.25 - 1,000
319.25 - 1,000
409.25 - 1,000
469.25 - 1,000
487.25 - 1,000
493.25 - 1,000
571.25 - 1,000
613.25 - 1,000
727.25 - 1,000
793.25 - 1,000
Rejection
(Typical)
50 dB
50 dB
50 dB
50 dB
50 dB
50 dB
50 dB
50 dB
50 dB
50 dB
50 dB
50 dB
50 dB
50 dB
50 dB
50 dB
50 dB
50 dB
5KHP Low Cost Tiering Highpass Filters
10 MHz
10 dB
Typical Frequency Response of 5KHP
5KHP Series
These tubular, weatherized highpass filters are low cost alternatives to the 3378
headend series where higher passband loss is acceptable. Their resistance to
moisture and temperature extremes makes them suitable for pole mounting.
These filters are not AC/DC passing.
Model
5KHP-50(4)
5KHP-61
5KHP-77
5KHP-4/5
5KHP-83
5KHP-88
5KHP-120
5KHP-174
5KHP-216
5KHP-300
5KHP-380(8)
5KHP-470(8)
5KHP-535(8)
5KHP-550(8)
Insertion Loss
(Typical)
1.0 dB 5.0 dB 5.0 dB 3.0 dB 5.0 dB
3.0 dB 3.0 dB 3.0 dB 3.0 dB
3.0 dB
5.0 dB
3.0 dB
6.0 dB
4.0 dB
Passband
(MHz)
50-1,000 61-450
77-550 77.25-550 83-450 87-1,000 120-1,000
175-550 217.25-1000 301-600 373.25-1,000
471.25-1,000
535.25-1,000
553.25-1,000
Stopband
(MHz)
0-40 0-56 0-70 0-67.25 0-76 0-77.25
0-107
0-163.25 0-205.25
0-278 0-377.75
0-443.75
0-517.25
0-535.25
Rejection
(Typical)
45 dB
50 dB
50 dB
50 dB
50 dB
50 dB
50 dB
50 dB
50 dB
50 dB
50 dB
50 dB
50 dB
50 dB
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
TV Channel Bandpass Filters
8786 Low Cost Wide Bandpass Filters
15 MHz
10 dB
8786 Series
The 8786 can be used at the headend when higher passband loss is acceptable to
pass major segments of the VHF spectrum. This model's resistance to moisture
and temperature extremes also makes it suitable as a pole-mounted tiering filter.
Model #
8786L
8786FM
8786M
8786H
8786S
Passband (MHz)
54-88 88-108
120-174
174-216
216-300
Stopbands (MHz)
0-50 & 120-870
0-76 & 120-900
0-107 & 186-900
0-162 & 228-900
0-204 & 318-900
Rejection (Min)
40 dB 40 dB 40 dB 40 dB 40 dB Insertion
Loss (Typical)
6 dB
6 dB
6 dB
6 dB*
6 dB*
*8786H&S only, 9dB @ 216 MHz
8" Long x .82" Diameter
5KBP Low Cost Channel Bandpass
Filters
5KBP Series
These filters are ideal for filtering agile modulators or for one channel
subscribers.
Model 5KBP Channels
2 to 6 (only)
Video-Aural
Insertion Loss 5 dB (approximate)
Rejection
±6 MHz From Fo
30 dB (approximate)
8" Long x .82" Diameter
Weatherized
5 MHz
10 dB
5KBP-(Channel #)
Inquire for availability
Typical Frequency Response of 5KBP
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
Multichannel Notch Filters
5KMT Wideband Tiering Filters
5KMT Series
Type 5KMT multichannel tiering notch filters are mass produced for low cost,
quantity use. See the table for standard models in production. For quantity applications, we can produce your special filter in this style at economical prices.
These filters are suitable for pole mounting.
10 MHz
10 dB
Stopband Rejection Passband (MHz)
Model
(MHz)
(Typ)
Lower
Upper
5KMT-PC
72.25-74.6
20 dB
5-71.75 77-550
72.5-74.4
30 dB
5KMT-FM 92-104
50 dB
5-87.75 109.25-1,000
5KMT-A/E 121.25-145.25 50 dB
5-115.25 151.25-1,000
5KMT-A/H 121.25-163.25 50 dB
5-109
169.25-1,000
5KMT-A/I 121.25-169.25 50 dB
5-115.25 175.25-1,000
5KMT-2/6
55.25-83.25
50 dB
5-30
91.25-1,000
5KMT-7/13 175.25-211.25 50 dB
5-167.75 217.25-1,000
* 8 dB at 71.75 MHz
** 4-6 dB Typ. at 108 MHz
*** 8 dB Typ at 167.75 and 5 dB Typ at 217.25
Loss at Band
Edges (Typ)
3 dB Typ*
3 dB
4 dB
5 dB**
5 dB**
3 dB***
6 dB
Typical Frequency Response of 5KMT
5258 Low Cost Channel Deletion Filter
5 MHz
10 dB
5258 Series
This filter deletes a channel for reinsertion of new programming at the headend
or for closed circuit use at a hotel, school or hospital. Adjacent channels are
sacrificed.
Channel
Video-Audio
Rejection
40 dB
50 dB
50 dB
50 dB
50 dB
50 dB
2 to 6
(A-2) to I
7 to 13
J to W
AA to OO
PP to WW
Lower, Semi-Adjacent Sound Length
Upper, Semi-Adjacent Video
In Inches
3.0 dB
5.0 dB
5.0 dB
5.0 dB
6.0 to 8.0 dB
5.0 dB
Dimensions: Length varies from 4.5" to 11.6" based on channel
Diameter is .875"
5258-(Channel #)
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
11.60
9.20
9.20
6.80
4.50
10.25
CATV Bandstop Filters for DOCSIS 3.1 Testing
Model 18926-Fo
These bandstop filters are used for CATV equipment proofing/testing as it relates
to DOCSIS 3.1.
Features:
• Covers the entire 1218 MHz operating band.
Specifications:
Stopband Center Frequency (Fo) Range . ...... 63 - 111 MHz
Stopband ........................................................ Fo ± 0.5 MHz
Stopband Attenuation . ................................... 55 dB Min
Passbands ....................................................... 5 MHz to Fo - 5 MHz and
...................................................... Fo + 5 MHz to 1218 MHz
Passband Insertion Loss . ............................... 3 dB Max.; 2 dB Typ
Passband VSWR............................................. 1.5:1 Typ
Impedance ...................................................... 75 ohms
Connectors ..................................................... F-female
Size ................................................................ 19.00" x 3.46" (2 RU) x 4.63" Approx
Model 18927-Fo
Specifications:
Stopband Center Frequency (Fo) Range . .......... 549 - 1215 MHz
Stopband ............................................................ Fo ± 0.5 MHz
Stopband Attenuation . ....................................... 55 dB Min
Passbands ........................................................... 5 MHz to Fo - 5 MHz and
.......................................................... Fo + 5 MHz to 1218 MHz
Passband Insertion Loss . ................................... 2 dB Max
Passband VSWR................................................. 1.5:1 Typ
Impedance . ........................................................ 75 ohms
Connectors ......................................................... F-female
Size .................................................................... 19.00" x 3.46" (2 RU) x 4.24 to 6.58" Approx
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
CATV Bandpass Filters for DOCSIS 3.1 Testing
These bandpass filters are used for CATV equipment proofing/testing as it
relates to DOCSIS 3.1.
Model 15743-Fo
Specifications:
Center Frequency (Fo) Range . .............. 993 - 1218 MHz
Passband ................................................ Fo ± 3 MHz
Passband Loss ........................................ 3 dB Typ
Rejection ................................................ 35 dB Typ @ Fo ± 10 MHz
Impedance .............................................. 75 ohms
Connectors ............................................. F-female
Size ........................................................ 6.62" x 2.40" x 3.30" Approx
Model 19187 Bandpass Filter
Specifications:
Passband ................................................ 258 - 552 MHz
Passband Insertion Loss . ....................... 4 dB Max
Passband VSWR .................................... 1.5:1 Max
Rejection ................................................ 20 dB Min from 40 - 246 MHz
20 dB Min from 565 - 1220 MHz
10 dB Min @ 252 MHz & 558 MHz
Impedance .............................................. 75 ohms
Size ........................................................ 7.75" x 1.50" x 1.10" Approx
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
CATV Highpass Filters for DOCSIS 3.1 Testing
Model 19027 Highpass Filter
These highpass filters are used for CATV equipment proofing/testing as it relates
to DOCSIS 3.1.
Specifications:
Passband ................................................ 1020 - 1218 MHz
Passband VSWR .................................... 1.5:1 Typ
Rejection ................................................ 80 dB Typ from DC - 900 MHz
50 dB Min from 900 - 1002 MHz
Impedance .............................................. 75 ohms
Size ........................................................ 19" Rack Panel Mounted for Indoor Use
Model 19189 Highpass Filter
Specifications:
Passband ................................................ 552 - 1002 MHz
Passband VSWR .................................... 1.5:1 Typ
Rejection ................................................ 20 dB Typ from (40 - 544) MHz
10 dB Min @ 546 MHz
Impedance .............................................. 75 ohms
Size ........................................................ 19" Rack Panel Mounted for Indoor Use
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .
Terms and Conditions of Sale
Quotations and Prices:
Prices are F.O.B. shipping point and will be invoiced at current prices in effect on date of purchase. Quotations are for
immediate acceptance only. Prices are subject to change without notice. All clerical errors made by Microwave Filter
Company, Inc. are subject to correction at its sole discretion.
Shipping/Freight Claims:
Shipments are made F.O.B. shipping point. All charges related to the shipment are the responsibility of the customer.
If the customer does not specify method of shipment, the Company reserves the right to select the carrier of choice.
The shipment must be inspected upon receipt. If damaged, it is the responsibility of the customer to file a claim with the
carrier.
Payment/Credit Terms:
Terms are Net 30 days to customers who have an established open account. If an open account has not been established,
we will ship C.O.D. for certified check. We also accept Visa, American Express and MasterCard.
Sales Tax:
When applicable, sales tax will appear as a separate line item on Microwave Filter Company, Inc. invoices unless a copy of
your sales tax exemption certificate has been previously submitted.
Returned Goods:
Your risk in trying our standard products is minimal. If the standard product does not meet your requirements, send it
back within 30 days (from date of invoice) and we’ll refund you the full purchase price. Shipping charges are not refundable. This offer applies to orders for one unit of the product only and the product must be returned in like-new
condition! Custom (made-to-order) products are not returnable for refund. No credit will be allowed for goods returned
except upon authorization from the Company. Restocking charges may be applicable in certain cases.
The customer is responsible for adequately packing the product for shipment and to insure for the value of the product.
The Return Authorization number must be clearly marked on the package and a brief description of the problem or reason
for return must be included.
Warranty:
Products returned to Microwave Filter Company, Inc. within one year of the date of purchase for original defects will be
replaced or repaired free of charge or refunded, at our option, if we confirm the defects. Otherwise, we will notify you of
the repair charges before we do any work. This is the full extent of our warranty. Microwave Filter Company, Inc. does
not accept responsibility for consequential or collateral damages.
Force Majeure:
The Company shall not be responsible for any loss or damage due to delay in delivery caused by fires, floods, accidents,
riots, acts of God, war, sabotage, government interference, strikes, labor disputes, shortage of labor, fuel, power
materials or supplies or any other cause or causes beyond our reasonable control.
Product Specifications:
Specifications are subject to change without notice.
Cancellation:
Orders may be cancelled only upon consent of the Company. Cancellation charges may be applicable.
MI C R O W A V E
F I L T E R
C O M P A N Y ,
I N C .

Vision Statement Corporate Profile

Transcription

Similar documents

our product brochure

Digitally tuned filters mtronpti.com

RFS Brochure_5044 Series_New Address_06-12-13.fm

TTMAV-700C Tower Mounted Amplifier Twin Variable Gain

Receptor radio pentru acces autovehicule Rosslare AY-L23C

MLNA-3010 - ELISRA Microwave Division

Swissphone RE729

Service Manual

T8500 - ISC Technologies

Fall Flyer 2012 p1