Wholesale catalogue 2013

Transcription

Steering system Rudder bearings port light
s
he
Hatc
Sail boat specialist
Wind instrument
Bow
t
hrus
te
rs
Vacuum& electric toilet
Bow thruster
Call us at Ph:0755029666 or email us at [email protected] or have a look
at our web site
www.southerseamarine.com.au
Southern
Seas
Marine
Supplier of QUALITY MARINE EQUIPMENT
http://www.southernseasmarine.com.au
2nd Edition
About Us
Southern Seas Marine are importers of top quality boat products,
including superior deck hardware parts to supply the marine
industry around Australia and Asia. Southern Seas Marine is
Australian authorized distributor for Goiot, Lofrans, Max Power,
Chatfield, Eco-sistems, Marvair, Simrad, B&G, NAB Shackles,
Soba, Admiral, Garhauer, Lavac, Sani Marim, Trident and Jefa
Steering & Bearing. We also supply for rope, bronze hardware
parts, plumbing, LPG cylinders, safety equipment and vents. So
whatever you need, our friendly staff can help.
We have been operating since 2002 and been going strong since.
The company was first started by Michael Date and with his
team of John & Kristel and our accounts staff of Ellen and Helen.
Michael’s passion is anything to do with marine or boating and
we base our business on that passion through customer service.
The team’s friendly nature would love to talk to you about your
boat or your needs.
If you can’t find what you are looking for then give us a call or
drop us an e-mail and we will strive to source and supply your
marine requirements.
Plumbing & Hardware
Pages 1 to 10
Hose, Elbows & Bellows
Pages 11 to 14
Rope
Pages 15 to 17
Deck Hardware
Pages 18 to 19
Wind Instruments / Electronics
Pages 20 to 27
Hydro Generator
Pages 28
Hatches, Portlights & Hardware
Pages 29 to 44
Steering Systems and Rudder Bearings
Pages 45 to 49
Sail Furlers
Pages 50 to 54
Safety Equipment
Pages 55 to 56
Bow & Stern Thrusters
Pages 57 to 65
Anchor Windlasses & Accessories
Pages 66 to 85
Toilets / Heads
Pages 86 to 89
Desalinators / Water Purification
Pages 90 to 94
Accessories
Pages 95 to 97
Life rafts
Pages 97 to 98
Index
Pages 99 to 100
Southern Seas Marine
Gold Coast City Marina
A6/ 58 Waterway Drive
Coomera QLD 4209
Ph: 07 5502 9666
Fax: 07 5502 9777
[email protected]
http://www.southernseasmarine.com
Plumbing & Hardware
Skin Fitting Bronze
These skin fittings are cast in high quality Marine Bronze and are designed to be
installed through the hull for any general water supply or outlet purpose, to fit
standard sizes.
Part No.
P283
P284
P286
P287
P288
P289
P290
P291
Bore
13mm
19mm
25mm
32mm
38mm
50mm
65mm
80mm
Thread size
½ BSP
¾ BSP
1 BSP
1 ¼ BSP
1 ½ BSP
2 BSP
2 ½ BSP
3 BSP
O/A Length
65mm
74mm
71mm
80mm
80mm
107mm
Ball Valve Bronze
Bronze ball valves with Stainless steel handle and nut. BSP threaded both ends.
Part No.
V1012
V1013
V1014
V1015
V1016
V1017
Size
13mm
19mm
25mm
32mm
38mm
50mm
Thread Size
½ BSP
¾ BSP
1 BSP
1 ¼ BSP
1 ½ BSP
2 BSP
Hose Connections Bronze
These fittings are cast in high quality marine bronze and are particularly suited for
adapting ball valves and deck fillers for use with flexible hose.
Part No.
P561
P547
P548
P545
P502
P578
Thread
½ BSP
¾ BSP
1 BSP
1 ¼ BSP
1 ½ BSP
2 BSP
Hose
13mm
19mm
25mm
32mm
38mm
50mm
Hex Nipple Bronze
Part No.
I5080012
I5080020
I5080025
I5080032
I5080038
I5080050
Thread
½ BSP
¾ BSP
1 BSP
1 ¼ BSP
1 ½ BSP
2 BSP
Male Hose Elbow Bronze
Part No.
V2221
V2222
V2223
V2224
V2225
1
Size
¾ male BSP x ¾ hose
1 male BSP x 1 hose
1 ¼ male BSP x 1 ¼ hose
1 ½ male BSP x 1 ½ hose
2 male BSP x 2 hose
Female Elbow Bronze
Part No.
I5050012
I5050020
I5050025
I5050032
I5050038
I5050050
Size
½ female BSP x ½ female BSP
¾ female BSP x ¾ female BSP
1 female BSP x 1 female BSP
1 ¼ female BSP x 1 ¼ female BSP
1 ½ female BSP x 1 ½ female BSP
Male Female Elbow Bronze
Part No.
I5060012
I5060020
I5060025
I5060032
I5060038
I5060050
Size
½ male BSP x ½ female BSP
¾ male BSP x ¾ female BSP
1 male BSP x 1 female BSP
1 ¼ male BSP x 1 ¼ female BSP
1 ½ male BSP x 1 ½ female BSP
Reducing Bush Bronze
Part No.
BB2012
BB2520
BB3225
BB4032
BB5040
Size
¾ male BSP to ½ female BSP
1 male BSP to ¾ female BSP
1 ¼ male BSP to 1 female BSP
1 ½ male BSP to 1 ¼ female BSP
2 male BSP to 1 ½ female BSP
Sea Scoop Bronze
Designed to admit a full supply of water at all speeds these non clogging strainer
scoop are available in the following sizes.
Part No.
P257
P258
P259
P260
P261
Size
55mm ID Round
85mm x 58mm ID Oval
147mm x 86mm ID Oval
148mm x 131mm ID Square
173mm x 157mm ID Square
Sea Scoop Bronze
Designed to admit a full supply of water at all speeds these non clogging strainer
scoop are available in the following sizes.
Part No.
P571
P859
P709
Size
2
Skin Fitting 316 Stainless Steel
These skin fittings are manufactured from 316 stainless steel deigned for
underwater use.
Part No.
SSK013
SSK019
SSK025
SSK032
SSK040
SSK050
Bore
13mm
19mm
25mm
32mm
38mm
50mm
Thread size
½ BSP
¾ BSP
1 BSP
1 ¼ BSP
1 ½ BSP
2 BSP
Ball Valve 2-piece 316 Stainless Steel
BSP threaded both ends.
Part No.
SBV006
SBV010
SBV013
SBV2020
SBV2025
SBV2032
SBV2038
SBV2050
SBV2065
SBV2075
Size
6mm
10mm
13mm
19mm
25mm
32mm
38mm
50mm
63mm
76mm
Thread Size
¼ BSP
3/8 BSP
½ BSP
¾ BSP
1 BSP
1 ¼ BSP
1 ½ BSP
2 BSP
2 ½ BSP
3 BSP
Hose Connections 316 Stainless Steel
These fittings are cast in 316 Stainless Steel and are particularly suited for adapting
ball valves and deck fillers for use with flexible hose.
Part No.
SSHT013
SSHT019
SSHT025
SSHT032
SSHT038
SSHT050
Thread
½ BSP
¾ BSP
1 BSP
1 ¼ BSP
1 ½ BSP
2 BSP
Hose
13mm
19mm
25mm
32mm
38mm
50mm
Hex Nipple 316 Stainless Steel
Part No.
SSHN013
SSHN019
SSHN025
SSHN032
SSHN038
SSHN050
3
Thread
½ BSP
¾ BSP
1 BSP
1 ¼ BSP
1 ½ BSP
2 BSP
Female Elbow 316 Stainless Steel
Part No.
SSFFE013
SSFFE019
SSFFE025
SSFFE032
SSFFE038
SSFFE050
Size
½ female BSP x ½ female BSP
¾ female BSP x ¾ female BSP
1 ¼ female BSP x 1 ¼ female BSP
1 ½ female BSP x 1 ½ female BSP
Male Female Elbow 316 Stainless Steel
Part No.
SSMFE013
SSMFE019
SSMFE025
SSMFE032
SSMFE038
SSMFE050
Size
½ male BSP x ½ female BSP
¾ male BSP x ¾ female BSP
1 ¼ male BSP x 1 ¼ female BSP
1 ½ male BSP x 1 ½ female BSP
Tee 316 Stainless Steel
Part No.
I5120020
I5120025
I5120032
I5120038
I5120050
Size
¾ female BSP
1 female BSP
1 ¼ female BSP
1 ½ female BSP
2 female BSP
Reducing Bush 316 Stainless Steel
Part No.
SSRB1913
SSRB2519
SSRB3225
SSRB3832
SSRB5038
Size
¾ male BSP to ½ male BSP
1 male BSP to ¾ male BSP
1 ¼ male BSP to 1 male BSP
1 ½ male BSP to 1 ¼ male BSP
2 male BSP to 1 ½ male BSP
Plug 316 Stainless Steel
Part No.
SSP013
SSP019
SSP025
SSP032
SSP038
SSP050
Thread
½ BSP
¾ BSP
1 BSP
1 ¼ BSP
1 ½ BSP
2 BSP
4
Male Hose Elbow 316 Stainless Steel
Part No.
SSHE013
SSHE019
SSHE025
SSHE032
SSHE038
SSHE050
Size
½ male BSP x ½ hose
¾ male BSP x ¾ hose
1 male BSP x 1 hose
1 ¼ male BSP x 1 ¼ hose
1 ½ male BSP x 1 ½ hose
2 male BSP x 2 hose
Ball Valve Stainless Steel 3 piece
Part No.
SBV008
SBV010
SBV015
SBV020
SBV025
SBV032
SBV040
SBV050
SBV065
SBV080
SBV100
Size
8mm
10mm
15mm
20mm
25mm
32mm
40mm
50mm
65mm
80mm
100mm
Ball Valve Nickel Plated Brass
Part No.
EPBUS013
EPBUS019
EPBUS025
EPBUS032
EPBUS038
EPBUS050
Size
13mm
19mm
25mm
32mm
38mm
50mm
Thread Size
½ BSP
¾ BSP
1 BSP
1 ¼ BSP
1 ½ BSP
2 BSP
Breathers (Fuel Tank)
Chrome plated bronze fuel breathers are easy to install. No need for hoseclamp as locking ring grips hose in position, for a reliable leakproof seal,
fitted with special flame arresting gauge.
Part No.
P511
P512
Hose Dia.
Max hull thickness
½ inch with tail
1 inch
½ inch without tail
Size
¾ UNF
Hawse Pipes
This selection of hawse pipes are made from stainless steel and bronze.
They are ideal for use in conjunction with our mooring cleats or open
cleats.
Part No.
P985
P964
P822
P860
5
Size opening
Type
Material
6 x 2 inch
Oval
Bronze / Chromed
140 x 70mm
Oval
Bronze / Chromed
5 ¾ x 3 inch (At Peak) C35 Triangle
Stainless Steel
6 ¼ x 4 inch (At Peak) C45 Triangle
Stainless Steel
Open Cleat
A very popular utility cleat manufactured in marine
Stainless Steel. A cleat for yachts and motor boats.
Centre serves, as a fairlead where necessary.
Order
Number
P56S
P928S
P554S
P639S
P883S
Overall
Length
5 inch
6 inch
8 inch
10 inch
12 inch
Height
30mm
32mm
34mm
45mm
57mm
Bolt
Diameter
¼ inch
5/16 inch
3/8 inch
½ inch
5/8 inch
Mooring Cleat
The mooring cleats are made from Marine Stainless
Steel. They are available in five stylish sizes good
looking as well as robust.
Order
Number
P730S
P731S
P692S
P697S
P729S
Overall
Length
6 inch
8 inch
10 inch
12 inch
14 inch
Height
57mm
70mm
81mm
Bolts
Diameter
¼ inch
¼ inch
5/16 inch
3/8 inch
½ inch
Deck Filler
These bevel flanged Marine Grade Stainless Steel deck
fillers have been designed for safe flush mounting. No
danger of stubbing toes or fouling lines. No need for
setting in. Fuel, Water, Diesel or Waste are clearly
stamped on the flange to positively identify the correct
tank intake.
· Order a P99 + TYPE REQUIRED (Water, Fuel,
Diesel, Waste)
Order
Number
Thread Size
Flange
Diameter
P99S
1 ½ inch BSP 98mm
52mm
P394S
2 inch BSP
68mm
P98WS
1 ¼ inch BSP 91mm
119mm
Spigot
Diameter
52mm
6
Hinges
These popular Stainless Steel hinges are designed
especially for marine use. The Pin is solid 316 stainless
steel for strength.
7
Order
Number
Type
Overall
Length
Overall
Width
P951S
Short/ Short
60mm
25mm
P950S
Long/ Short
95mm
25mm
P952S
Long/ Long
130mm
25mm
Order
Number
Type
Overall
Length
Overall
Width
P486S
Short/ Short
96mm
35mm
P487S
Long/ Short
136mm
35mm
P485S
Long/ Long
171mm
35mm
Order
Number
Type
Overall
Length
Overall
Width
P529S
"T" Hinge
120mm
63mm
P555S
"H" Hinge
75mm
63mm
Lifting Rings
Designed as a lifting ring to be fitted to decks, hatches, cupboards etc.
Flush lifting rings are available in two patterns and are made from drop
forged bronze with a chrome finish or polished bronze.
Part No.
Round Pattern
P210
Part No.
Diameter
2 ¼ inch / 57.15mm
Oblong Pattern
P456
Diameter
2 3/8 x 1 9/16 inch / 60.3 x 39.68mm
Twist lock type lifting handles are manufactured from 316 stainless steel.
The rotating twist lock shaft has an ‘O’ ring fitted to resist water entering a
locker or cabin. The latch can be adjusted to suit most hatch thicknesses.
Part No.
Diameter
S827
2 5/16 x 2 ¾ inch / 84.2 x 69.85mm
Lifting Handle
This heavy-duty stainless steel lifting handle is ideal for deck hatches or
storage drawers.
Part No.
P707
Size
3 ¼ x 2 ¼ inch / 82.55 x 57.15mm
Air scoop or Cowl
These chrome plated pressed brass scoops are ideal for runabout engine
boxes, fuel breather cowls and for covering anchor locker chain hole
outlets.
They can also be used to cover wire loom exit points in cockpit side
panels.
Part No.
P373
P635
Size
4 x 3 inch x 1 ¼ high / 101.6 x 76.2mm x 31.75 high
2 x 2 inch x 5/8 high / 50.8 x 50.8mm x 15.875 high
8
Port and Starboard Fairleads
These fairleads (or bow chocks) are cast in marine quality bronze and are
available polished or chrome plated. (Sold as port and starboard pairs)
Part No.
P544
O/A Height
41mm
O/A Length
184mm
Width
38mm
Stern Fairleads
These stern chocks are cast 316 stainless steel with a highly polished
finish.
Part No.
P572
O/A Height
38mm
O/A Length
152mm
Width
32mm
Strut Bolts
Manufactured from tobin bronze, these raised countersunk bolts are
designed for use below the waterline for such jobs as fastening
struts, bearings etc.
Also used for securing heavy duty mooring bollards and toe rails.
Maltese Cross Bollard
These traditional shape bollards are cast in tough manganese bronze with
four hole fixing and have a strong and pleasing appearance. Ideal as a
mooring bollard. Available in chrome plate.
Part No.
P27
P368
P369
Height
6 inch
8 inch
10 inch
Base
90 x 127mm
100 x 135mm
140 x 203mm
Bolts - Dia
3/8 inch
½ inch
½ inch
Weight
1.5kg
3.5kg
6kg
Streamlined Bollard
These popular modern shape raked bollards are available in three sizes
covering a range of craft from 12 to 30 feet. Cast in Marine Quality
bronze, has a high class finish in Chrome plated.
Part No.
P25
P389
P26
9
Height
3 inch
4 inch
5 inch
Base Length
88mm
100mm
111mm
Weight
0.4kg
0.73kg
1.1kg
Raw Water Strainers
Nickel Plated Bronze
Ÿ Clear Transparent Top PA6
Ÿ Two versions - side inlet or bottom inlet
Ÿ Solid Cover available - upon request only
Side Inlet
Bottom Inlet
Order Number Size
Order Number Size
1162/1
1 inch
1160/34
¾ inch
1162/114
1 ¼ inch
1164/1
1 inch
1162/112
1 ½ inch
1164/114
1 ¼ inch
1162/2
2 inch
1164/112
1 ½ inch
1164/2
2 inch
Black Anodised Aluminium
Ÿ Clear Transparent Top PA6
Ÿ Two versions - side inlet or bottom inlet
Ÿ Solid Cover available - upon request only
Side Inlet
Bottom Inlet
Order Number Size
Order Number Size
3162/34
¾ inch
3164/1
1 inch
3162/1
1 inch
3164/112
1 ½ inch
3162/112
1 ½ inch
3164/2
2 inch
3162/2
2 inch
10
Hose
Corrugated A2 Marine Fuel
Premium corrugated marine fuel fill hose for very tight bends. Thick wall
with corrugated cover, smooth tube and wire helix between 2 ply
reinforcement for extraordinary flexibility and bend radius. Resists
permeation, fire, heat, cold, ozone and premature aging by all marine fuels
including alcohol blends. Exceeds Newest Type A2 (USCG, SAE, ISO,
ABYC) Std. NMMA Type Accepted, CE certified, Lloyds Register Type
Approved.
5 YEAR WARRANTY
Available sizes - 1 ½ inch to 3 inch / 38mm to 76mm
Packaging - Cut per metre, 15m coil
)
Order number - T329-(
A2 Marine Fuel
Premium marine fuel fill hose. Thick wall with smooth tube and cover,
and wire helix between 2 ply reinforcement for excellent flexibility and
bend radius. Resists permeation, fire, heat, cold, ozone and premature
aging by all marine fuels including alcohol blends. Exceeds Newest Type
A2 (USCG, SAE, ISO, ABYC) Std. NMMA Type Accepted, CE certified.
Lloyds Register Type Approved. #328 is without wire.
5 YEAR WARRANTY
Available sizes - ¾ inch to 3 inch / 19mm to 76mm
)
A1-15 Marine Fuel
Trident Barrier Lined A1-15 Fuel Hose (Distribution, Return, Vent, and
Transfer) for both gasoline (petrol) and diesel (including alcohol blends).
Exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, & USCG Type A1;
and is NMMA Type Accepted & CE certified. It is also compliant with
CARB Regulations. Built with best fuel, fire and age resistant formulation,
2 spiral reinforcement and unique "Barrier Liner" on inside surface of tube
so fuel is not in direct contact with rubber. Provides extraordinary
resistance to fuel permeation and aging, as well as fire, heat, cold, and
ozone. Also good Bend-ability. 5 YEAR WARRANTY
Available sizes - ¼ inch to 5/8 inch / 6.3mm to 16mm
Packaging - Cut per metre, 15m coil, 30.5 reel
)
B1 Marine fuel
Premium B1 fuel line hose. Thermo-plastic reinforcement gives excellent
flexibility, bend radius, resistance to UV, cold, aging and permeation by
all marine fuels including alcohol blends. Exceeds Newest Type B1
[USCG, SAE, ISO, and ABYC] Std. NMMA Type Accepted. CE certified.
For I/B and I/O fuel systems, this is THE O/B fuel line hose for the
domestic market and the ONLY one for the international market.
3 YEAR WARRANTY
Available sizes - ¼ inch to 5/8 inch / 6.3mm to 16mm
Packaging - Cut per metre, 15m coil, 30.5m reel
)
B1-15 Marine fuel
Trident Barrier Lined B1-15 Fuel Hose for both gasoline (petrol) and diesel
(including ethanol blends up to E85). Exceeds ABYC H-24, SAE J1527,
ISO 8469 B1, & USCG Type B1-15; CARB and EPA low permeation; and
is NMMA Type Accepted & CE certified. Built with best fuel and age
resistant formulation, 2 spiral reinforcement and unique "Barrier Liner" on
inside surface of tube so fuel is not in direct contact with rubber. Provides
extraordinary resistance to fuel permeation and aging, as well as heat,
cold, and ozone. Also good Bend-ability. 3 YEAR WARRANTY
Available sizes - ¼ inch to 3/8 inch / 6.3mm to 9.5mm
Packaging - Cut per metre, 15m coil, 30.5m reel
)
11
Corrugated Marine Wet Marine
Premium corrugated marine wet exhaust hose for longer connections with
substantial bends. Thick tube and cover with helix between 2 ply
reinforcement. Exceptional flexibility and bend radius. Resists heat,
ozone, exhaust fumes, panting and collapse. Exceeds
(SAE J2006,
ABYC and NMMA) Stds. Black High Temp EDPM Rubber 250°F (121°C).
5 YEAR WARRANTY
Available sizes - 1 ½ inch to 12 inch / 38mm to 304.8mm
)
Flex Marine Wet Exhaust & Water
Premium wet exhaust hose for longer bent connections. In smaller I.D.'s
for engine intake, critical water, drain, scupper bilge & sanitation uses.
Extra heavy tube and cover with helix between 2 ply reinforcement
provides excellent flexibility and bend radius. Resists heat, ozone,
exhaust, sani chemicals, panting and collapse. Exceeds
(SAE J2006,
ABYC and NMMA) Stds.** Black High Temp EDPM Rubber 250°F
(121°C).
5 YEAR WARRANTY
Available sizes - ½ inch to 12 inch / 13mm to 304.8mm
)
Ply Marine Wet Exhaust & Water
Premium marine wet exhaust hose for short, straight connections. In
smaller I.D.'s for critical engine coolant & circulation, heat exchanger and
discharge uses. Extra heavy tube and cover with 2 to 6 ply reinforcement
resists heat, aging, ozone, exhaust and sani chemicals. Exceeds
(SAE
J2006, ABYC and NMMA) Stds.** Black High Temp EDPM Rubber 250°F
(121°C).
5 YEAR WARRANTY
Available sizes - ½ inch to 12 inch / 13mm to 304.8mm
)
Silicone & Rubber Wet Exhaust Elbows & Bellows
Silicone & Rubber Elbows & Hump Hose Bellows provide the
ultimate flexible connectors for Marine Wet Exhaust Systems.
They offer much greater tolerance to heat , misalignment,
engine movement, & vibration, with significant savings in
cost, parts, labor and space. Highest max. continuous
operating temps.
Molded Black Hi Temp: EPDM Rubber 250°F (121°C).
Blue Very Hi Temp: Silicone 350°F (177°C).
Red Xtra Hi Temp: Silicone 500°F (260°C). Silicone (Blue
VHT and Red XHT), also available with 4 to 6 ply
reinforcement. Same temps, but higher pressure resistance for
coolant, turbocharger, etc. applications. All exceed
(SAE
J2006, ABYC and NMMA) Stds.** Black High Temp EDPM
Rubber 250°F (121°C). See Marine Wet Exhaust Systems
Catalog. ISO 13363 Std. Pending.
5-10 YEAR WARRANTY
Order number - (
)-(
)
12
Silicone Marine Wet Exhaust & Water
Ultimate quality Silicone Marine Exhaust & Water hose. #202V Blue Very
Hi Temp. [4 to 6 ply polyester reinforcement 350°F (177°C)] & #202X Red
Xtra Hi Temp [4 ply Nomex® reinforcement 500°F (260°C)] dramatically
exceeds all standards and lasts up to 6 times longer than black rubber.
(SAE J2006, ABYC and NMMA) Stds.** See Marine Wet Exhaust Systems
Catalog. ISO 13363 Std. Pending.
10 YEAR WARRANTY
Available sizes - 1 inch to 18 inch / 25.4mm to 457mm
Packaging - Cut per metre, 7.6m coil
)
Order number - T202v(
Marine H.D & X.H.D Water
Cost effective, Hi Temp, EPDM rubber, polyester reinforced and exceeds
SAE J20R3. Both are resistant to coolants, ozone, cold & heat; and serve a
variety of boat and plant pressurized applications (water & air delivery).
#132: 2 spiral, 200PSI (1.38Mpa) WP.
#134: 4 spiral, heavy wall and better bend radius and working pressure 300PSI (2.1Mpa) WP. Operating temperature -40° to 212°F (-40° to 100°C).
#134 serves below water line intake and discharge applications (A/C, Eng,
Sani) etc.
2-3 YEAR WARRANTY
Available sizes - 1 inch to 18 inch / 25.4mm to 457mm
Order number - T132/134-(
)
Sani Sheild Sanitation
Premium White sanitation hose for all head and holding tank connections.
Extra thick tube and cover specially compounded for Max. Resistance to
odor permeation and winterizing anti-freeze. Helical wire between 2 ply
reinforcement provides excellent flexibility bend radius. Longest odorfree performance on the market, but self draining installations still
recommended. Not for potable water.
5 YEAR WARRANTY
Available sizes - 1 inch , 1 ½ inch or 1 7/8 inch
)
VAC X.H.D Sanitation
Extra heavy-duty sanitation hose of smooth white vinyl. Specially
compounded to provide excellent resistance to odor permeation and (FDA)
potable water fill. Also for critical bilge, drain scuppers, live wells, etc..
Hard PVC helix gives good flexibility and bend radius. No cuffs required.*
Don't use with alcohols, anti-freeze, petro-chemicals or solvents. Self
draining installations are recommended for longest odor free service. Max.
operating temps: +10° to +140° F
(-12° to +60°C).
3 YEAR WARRANTY
Available sizes - 5/8 inch to 1 ½ inch / 16mm to 38mm
Packaging - Cut per metre, 7.6m coil, 15m reel
)
13
H.D Bilge & Live Well
Heavy duty bilge, drain and live well hose. Clear see thru vinyl (FDA)
corrugated with black hard PVC helix and smooth tube. Provides
exceeptional flexibility and bend radius. NOT RECOMMENDED FOR
BELOW WATER LINE THRU-HULL CONNECTIONS. No cuffs
required.
Operating temps: +10° to +140° F (-12° to +60°C).
2 YEAR WARRANTY
Packaging - Cut per metre, 15m reel
)
X.H.D Bilge & Live Well
Smooth extra heavy wall vinyl (FDA) well hose. All clear (see thru) with
black helix. Excellent durability, flexibility & bend radius for XHD bilge,
live well, drain, scupper lines, etc. No cuffs required. Operating
temperatures +10° to +140°F (-12° to +60°C).
3 YEAR WARRANTY
Packaging - Cut per metre, 15m reel
)
PVC Vent Duct
Wire supported vinyl ducting resists weather, sunlight and ozone.
#400-402: Standard vent ducting 3 mil.
Operating temperatures 0° to +160° F
(-18° to +71° C)
1 YEAR WARRANTY
Available sizes - 3 inch / 76mm
Packaging - 15m box
Order number - T400 or T402-(
)
PolyDuct
Trident Polyduct - The most flexible, crush proof, and rugged blower duct
hose for Heat, Ventilation, and Air Conditioning (HVAC). Heavy Duty
polypropylene hose, reinforced with a flexible polypropylene rod helix. It
has excellent flexibility & compressibility; and excellent resistance to
crushing, flex fatigue, tearing, and moisture. Stomp on it and it returns to
shape with out damage. Shove it through tight openings and overheads and
it delivers full air flow. Meets FMVSS 302 flame resistance, Temp. range:
-40° F to 225° F (-40° C to 107° C).
3 YEAR WARRANTY
Available sizes - 3 inch to 8 inch / 76mm to 203mm
Packaging - 15m box
)
14
Rope
VB Cord
Available in different colours - Black, White, Red, Blue, Green and
Yellow.
Available in 100m or 500m
Order number - (Amount) x (Length) x VB(Size)(Colour)
Double Braid Rope
Available in different fleck colours - Black, White, Red, Blue, Green and
Yellow. Available in 100m, 200m or Bulk
Breaking load in KG
2mm 8mm 14mm 20mm -
72
1728
4608
8300
4mm 10mm 16mm 22mm -
288
2880
5616
9504
864
3600
7400
12032
Order number - (Amount) x (Length) x DoubleFleck(Size)(Colour)
Double Braid Rope
Available in different solid colours - Black, White, Red, Blue, Green and
Breaking Load in KG
2mm 8mm 14mm 20mm -
72
1728
4608
8300
288
2880
5616
9504
864
3600
7400
12032
Order number - (Amount) x (Length) x DoubleSolid(Size)(Colour)
SuperSpeed Rope
Available in different fleck colours - Black, White, Red, Blue, Green and
Breaking Load in KG
2mm 5mm 10mm 16mm -
112
1022
4199
8285
3mm 6mm 12mm 18mm -
402
1505
5375
9683
4mm 8mm 14mm 20mm -
532
2939
6858
12460
Order number - (Amount) x (Length) x UHMPEFleck(Size)(Colour)
SuperSpeed Rope
Available in different solid colours - Black, White, Red, Blue, Green and
Breaking Load in KG
2mm 5mm 10mm 16mm -
112
1022
4199
8285
3mm 6mm 12mm 18mm -
402
1505
5375
9683
4mm 8mm 14mm 20mm -
532
2939
6858
12460
Order number - (Amount) x (Length) x UHMPESolid(Size)(Colour)
15
Commercial Rope also available
Call us for our full Rope catalogue
Challenge Braid Rope
Available in different fleck or solid colours - Black, White, Red, Blue,
Green and Yellow. Available in 100m, 200m or Bulk
Breaking Load in KG
3mm -
550
700
2000
5mm -
1630
4mm 7mm -
6mm 10mm 16mm -
1200
8mm -
3600
6800
12mm -
8100
14mm -
10400
12500
18mm -
15000
20mm -
18000
Order number - (Amount) x (Length) x challenge(Size)(Colour)
Closehaul Rope
Available in different colours - Mottle Black, Mottle Red or Mottle Blue.
Available in 100m or 200m. Breaking Load in KG 6mm
8mm
10mm
12mm
14mm
792
1584
2574
3168
4158
Order number - (Amount) x (Length) x Closehaul(Size)(Colour)
Nylon Rope
Available in 3, 8 and 12 strand. Available in 100m, 200m or 300m.
Available size Breaking loads in KG for 3 strand 6mm 10mm 14mm 20mm -
750
2080
4100
8260
1346
3000
5300
12035
Order number - (Amount) x (Length) x 3, 8 or 12 Nylon(Size)
Silver Rope
Available in 80m, 100m, 125m, 250m or 300m
Breaking Load in KG 6mm 10mm 14mm 20mm -
375
945
1440
3160
8mm 12mm 16mm -
620
1265
2120
Order number - (Amount) x (Length) x Silver(Size)
Shock Cord
Available in different colours - Black, White and Blue
Available in 50m or 100m
Order number - (Amount) x (Length) x Shock(Size)(Colour)
16
VB Brights Box
Features
Ÿ Strong, bright coloured braids in pocket size spool
Ÿ Fade and abrasion resistant
Ÿ Polyester construction
Ÿ UV Treated
Ÿ Low Stretch
Application - Whipping, tying and general purpose
Average Break load - 2mm 100kg - 3mm 145kg
Range
Ÿ 2mm in 30m spools (order number - PRP0200)
Ÿ 3mm in 20m spools (order number - PRP0300)
Ÿ Sold in Cartons of 10 spools (mixed colours)
Pre-Pack Dock lines
Donaghys water-resistant Nylon Dock Lines coated to prevent strength loss when
wet. High twisting of yarns and strands produces a dense, round rope with higher
abrasion resistance that is less likely to snag. A balanced, torque free line manufactured under controlled conditions ensures the rope wont un-lay under heavy loading. Soft and easy to handle, cleat and coil. Approx 15% stronger than comparable
three strand dock lines.
Order Number
Nylon Dock Line - Eye on end - whipped other
BRY101DOC
10mm x 4.6 mtrs
BRY102DOC
10mm x 7.5 mtrs
BRY121DOC
12mm x 4.6 mtrs
BRY122DOC
12mm x 7.5 mtrs
BRY123DOC
12mm x 10.7 mtrs
Rope Accessories
Order Number
Style
PRP9053
Hand held Rope Cutter
PRP9054M
Head held Rope Cutter blades
PRC0005
Rope cutter bench type
PRP9058M
Rope Measurer
PRP9061M
Splicing Kit
PRP0100M(colour)
Rope Coat - Clear, red, blue, green,
black
Available sizes and colour -
Cut Lengths of Rope
Yachtmaster
BRY0806
8mm
White w/ Black Fleck
BRY08NBM
8mm
White w/ Red & Blue Fleck
BRY1015
10mm
White w/ Red Fleck
BRY10NAT
10mm
White w/ Black & Yellow Fleck
BRY1211
12mm
White w/ Red Fleck
BRY1292
12mm
White w/ Blue & Black Fleck
Super Speed (UHMPE)
17
BRY0837
8mm
White w/ Red Fleck
BRY0839
8mm
White w/ Green Fleck
Fluro Yellow w/ Black Fleck
BRY1063
10mm
BRY1001S
10mm
Red w/ Black Fleck
BRY1298
12mm
Blue w/ Black Fleck
BRY12ZLM
12mm
White w/ Blue & Yellow Fleck
Deck Hardware
Single Block with Adjustable Shackle
- With Becket
Single Block with Snap Shackle
- With Snap Shackle and Becket
Single Block with Stand-up deck plate
Double Block with Adjustable Shackle
- With Becket
Triple Blocks with Adjustable Shackle
- With Becket
- With Becket & Cam Cleat
Fiddle Block with Adjustable Shackle
- With Becket
- With Cam Cleat
Fiddle Block with Snap Shackle
- With Becket
- With Cam Cleat
Snatch Blocks
Boom Vangs
Two Speed Vangs
Rigid Boom Vangs
High-Load Single Block with Adjustable Shackle
- With Becket
High-Load Single Block with Deck Plate
- With Becket
Series
15
20
25
27
30
40
50
60
70
Maximum Line size
8mm
8mm
10mm
10mm
14mm
14mm
16mm
16mm
20mm
Sheave Diameter
25mm
43mm
50mm
60mm
65mm
65mm
76mm
85mm
100mm
Safe Working Load
182kg
272kg
520kg
544kg
907kg
1270kg 1360kg 1590kg 2267kg
18
Rope Clutches
- Singles, Doubles, Triples, Quads
Bow Rollers
Cheek Blocks
Deck Organisers
Foot Blocks
MainSheet Travelers
- Universal Risers
“T” Track
Track Cars
- Slides
- Rope Clutches
- Low Lead
E-Z Glide Swivel Car System
- Swivel Cam
Stanchion Tubes
- Stanchion bases
- Stanchion Tubes with welded bases
- Stanchion gates
Dinghy Davits
Lifting Davits
Kayak Racks
Radar Towers
- lifting hoist for Radar Tower
Genoa Boarding Ladder
Retractable Outboard Mount
19
Sport Touch. evo2
NSS9 evo2 Chartplotter / Multifunction Display
7-inch, 9-inch, 12-inch and 16-inch touch-screen chartplotter /
multifunction display with built-in GPS, CHIRP / traditional sonar
The NSS evo2 combines form, fit and function in an easy-touse multifunction device. The integrated NSS evo2 MFD
features a sleek display with TouchSensible™ multi-touch
interaction. TouchSensible, provides precision interaction in
any sea condition with its logical keypad input and rotary,
push-to-enter knob. With its widescreen 16:9 display,
integrated StructureScan™ and Broadband sonar, and
expandability the NSS evo2 is well suited for center consoles,
sportfishing and power cruising boats.
Mapping Options: Navionics®, C-MAP MAX-N, Insight,
Insight Genesis, NV Digital and charts produced with Navico
Mapcreator
Key Features
NSS7 evo2 Combo Multifunction Display Key Features
·
TouchSensible™ interface with multi-touch control
The NSS7 evo2 is engineered for performance, functionality and
and rotary dial with keypad
flexible control. Its TouchSensible™ interface provides multi-touch
·
Embedded, hi-gain 10Hz GPS/GLONASS antenna
interaction for ease of use when cruising, as well as a keypad and a
rotary push-to-enter knob for quick and effective use on those days
·
16:9 display with pre-set and customizable navigation
when waves and boat movement make it hard to use a touch-screen
panels
accurately. The NSS7 evo2’s 16:9 widescreen display features a
·
Flush-mount installation and classic black and
tablet-style home screen with pre-set navigation panels and
brushed silver trim panels
programmable favorites for concise display of information, and
·
Simrad performand module integration
easily identifiable touchscreen function keys. The screen’s
·
Complete vessel integration
background can be customized with a picture of a boat, crew, fish,
·
Best in Class Performance:
destination and more.
·
Fast Processor,
The NSS7 evo2 incorporates technology designed for blue water
anglers and cruisers and provides a wealth of expansion options for
·
Bright Screen,
boaters to get the most from their excursions. SonarHub is integrated
·
Easy to Use
in the NSS7 evo2 and combines award-winning StructureScan™
·
Intelligent
Engineering:
Sonar, Broadband Sounder and CHIRP technology to give anglers
·
Low Profile (~8mm) front mount option.
the ability to view fish and structure in both 3D imaging and high·
Glass-Bridge look for any vessel
definition sonar. The NSS7 evo2 also provides full autopilot
integration for control from its TouchSensible display; and the
·
GPS works in flush mount installations* (*on
embedded high-gain 10 Hz GPS antenna provides precise location
MOST non-metal boats).
information.
·
Full autopilot integration capability
The Simrad GoFree WiFi option allows viewing and control of the
·
Simrad GoFree WiFi integration capability
NSS screen from a compatible tablet as well as viewing from a
·
Networking capability
compatible phone. The system’s networking capability allows the
addition of extra screens, display of engine and the ability to control
an iPhone music playlist via the navigation screen. NSS7 evo2
integration can be extended for complete vessel control with digital
Wifi-1
switching, night-vision camera control (FLIR™). Cartography
compatibility includes Insight, C-Map MAX-N and Navionics.
View and control your MFD with
Engineered for form and function, the NSS7 evo2 enhances the helm
your tablet or Smart phone
of any vessel. Its flush-mount design provides a professional, low
from anywhere on board.
profile look that is complemented by classic black or brushed silver
trim panels – both included with every system.
NEW
Order Number 7 inch NSS evo2 Touch Screen - # 000-11183-003
9 inch NSS evo2 Touch Screen - # 000-11191-003
Ÿ Free viewer App
Ÿ Free Controller App
ŸOpen protocol data for
custom app development
Order Number - # 000-11068-001
20
Expert Technology.
8 and 12 inch Multifunction displays providing powerful
networking and integration capabilities and professional level
performance with sophisticated charting, radar and
ehcosounder technology.
Bright Display
Unique LED backlighting technology provides a bright (1500 nits),
clear, highly visible display which not only reduces power
consumption, but also increases product life.
Intuitive Control Interface
Developed to keep you in control of every situation with lightningfast operation. The alphanumeric keypad allows rapid entry of
precise data, whilst the quick touch keys enable immediate page
selection. The smooth rotary controller with push to enter
functionality provides instant adjustment for zooming of charts and
echo gain.
Robust Construction
Elegantly designed and brutally strong.
Expandable
Network multiple displays and performance modules effortlessly
to create an unrivalled fully-integrated system.
Autopilot Integration
Control your Simrad Pilot with your NSE8. No need for a separate
controller.
Embedded Cartgraphy
Includes InsightHD (U.S. models) or Navionics Silver (Europe,
Asia and South America).
SD Card Slot
Upgrade to TurboView or Platinum Plus with ease.
NMEA 2000® Capable
SonicHub
Fully integrated marine audio server.
Fully compatible with all NMEA 2000® equipped units.
Smart Boat Technology
Transform your vessel into a "smart boat" with CZone digital
switching and monitoring technology.
Ÿ Control your music from your NSO,
NSE or NSS
Ÿ iPhone, iTouch & iPod compatible
Ÿ Play MP3 files via the USB Drive
Ÿ Fully waterproof
Order Number - # 000-10143-001
Order Number 8 inch NSE Chartplotter / Multifunction Display - # AA010145
12 inch NSE Chartplotter / Multifunction Display - # AA010147
21
Offshore Control.
Flexible performance navigation systems with
uncompromising bridge aesthetics and unrivalled integration
options.
Bright Sun-Light Viewable Display
This 1500nit full colour display, with wide viewing angle, is highly visible
even in bright sunlight.
Multiple Video Inputs
3 VGAs, 2 DVIs, 3 composite and 1 S-Video.
Language Options
Select from English, French, German, Italian and Spanish in the OSD
menu.
Dimming
Wide dimming range to black.
Red Mode
Clearly see the screen in dark conditions.
Flush Mountable
A stylish option for the ultimate look.
NSO OP40 Controller
Alphanumeric Keypad
Provides logical operation of all navigation systems.
Rotary Controller
Allows for rapid zoom and redraw of charts and instant adjustment of echo gain. Push to enter
functionality is also intuitive and quick.
Quick Touch Keys
Immediate access to the information and control you need. Includes dedicated Pilot button.
Port/Stbd LED Indicators
Clearly see course adjustments to port and starboard.
Multi Processor Operation
Ability to control up to four processors
IPX6 Certified
Fully waterproof.
Micro-C Connectivity
Connects to SimNet via Micro-C.
Autopilots
Order Number 15 inch LED Monitor - # 000-10506-001
17 inch LED Monitor - # 000-10507-001
19 inch LED Monitor- # 000-10508-001
OP40 Controller - #000-10298-001
The AP70 is our flagship Pilot
controller, embedded with the most
comprehensive technology from over
60 years of experience. This stateof-the-art, commercial grade
autopilot combines an unrivalled
adaptive auto-steering system with a
bright and clear, colour display and a
user interface designed by captains
for captains.
Order Number - # 000-10182-001
22
Integrate Everything.
High Speed GPS
The GS15 GPS antenna provides boaters with greater accuracy and performance
for industry-leading positioning. SimNet and NMEA2000® network ready, the
GS15 easily networks to NSS, NSE or NSO chartplotter / multifunction displays.
Ÿ
Ÿ
Ÿ
Ÿ
16-channel 5Hz GPS Antenna (NMEA 2000)
Superior signal acquisition
Compact design
Easily flushed mounted
StructureScan HD
Find fish more easily, explore below the surface or find the perfect spot to anchor.
StructureScan® HD enables boaters to see exactly what's below their boat with
crisp, clear imagery to the left, right and directly beneath, at depths of up to 100m.
The latest HD generation delivers greater resolution and wider range for enhanced
underwater imagery
Ÿ SideScan and DownScan
Ÿ True 180 degree view
Ÿ Picture perfect imagery
SonicHub
Take your music onboard and experience the ultimate in marine audio with the
world's first hub and docking station designed specifically for the marine
environment and controlled direct from your chartplotter / multifunction display.
Ÿ Control your music from your NSO, NSE or NSS
Ÿ Iphone, itouch & ipod compatible
Ÿ Play MP3 files via the USB drive
Ÿ Fully waterproof
Broadband Radar
This FMCW radar has all of the benefits of our revolutionary Broadband 3G™
Radar but with more advanced features, including beam sharpening for target
separation control, Dual Range radar (NSE & NSO) and increased target detection
capabilities.
Ÿ Unrivalled performance
Ÿ Eliminates “main bang” dead zone
Ÿ Efficient low-power technology
Ÿ Performance features with new Broadband 4G Radar
Go Free Wireless Technology
View and control your MFD with your tablet or smartphone from
anywhere on board.
Ÿ Free viewer app
Ÿ Free controller app
Ÿ Open protocol data for custom app development
23
Integrate Everything.
VHF Radio
See, hear and be heard with the RS35 VHF/AIS fixed mount radio. This premium
VHF and AIS receiver solution allows users to communicate clearly on board and
off.
Ÿ Class D DSC
Ÿ Fixed and handheld
Ÿ Loud and clear audio
HD Digital Radar
Our 4kW HD radome provides boaters with exceptional detection of small or
distant targets using our advanced Digitial Signal Processing technology. Screen
clutter in any weather is virtually eliminated allowing a clear, accurate and easy to
interpret image. The 4kW radome is ideal for small powerboats and sailboats.
Ÿ 4kW dome, 6kW, 10kW & 25kW open arrays
Ÿ High definition clarity
Ÿ True colour displays for storm imagery
Ÿ Auto moves with reduced screen clutter
AIS
Reduce your risk of collision with this latest generation, fully integrated, Class-B
AIS transponder - essential for navigating today's busy shipping lanes and
congested ports. Compact in size, lightweight, fully waterproof, with low power
draw and featuring multiple connections, the NEW NAIS-400 is ideal for
networking with any NSS, NSE or NSO chartplotter / multifunction display and
Simrad RS VHF system.
Ÿ See and be seen technology
Ÿ Track and identify vessels for safe navigation
Ÿ Black box module
Autopilot
The brains behind the brawn, the AC12 is an essential component in your AP24/28
autopilot system. It contains the steering computer and electronics for the drive
unit motor and clutch whilst also acting as an interface to other system
components.
Ÿ Integrated turn patterns
Ÿ Dodge function
Ÿ Virtual rudder feedback
Ÿ Advanced wind steering
Broadband Sounder Module
The BSM-2 is the most advanced Broadband Sounder on the market. Crisp, clear
targeting with CHIRP technology and a 3,000m working range allow professionals
and serious sport fisherman to venture far offshore whilst their rivals with 3kW
sounders are stuck firmly in the shallows.
Ÿ Advanced digital processing
Ÿ Incredible targeting & fish detection
Ÿ High definition of bottom at speed
Ÿ New CHIRP technology in BSM-2
24
Zeus 2
Key Features
· Sailing-specific navigation
Loaded with unique sailing features including
features including Laylines, SailSteer, SailTime,
WindPlot and more
· Pioneering design
Zeus² features a bright, crisp color display with
maximum screen-to-unit size ratio and ultra-low
profile casing for less clutter and a smart finish
· Intuitive, responsive multi-touch display
Pinch to zoom, tap to select and swipe to pan for
faster control and absolute ease of use
· Choice of leading cartography options
Select a chart that suits your requirements from
The new Zeus² chartplotter is packed full of B&G’s unique
sailing specific features. Additional benefits include an easy to
Navionics, C-Map, Insight and more. Zeus²
use, highly intuitive and responsive user interface, multi-touch
features dual media card slots to run multiple
widescreen with pinch to zoom technology - all backed up by
datasets and give you the level of detail you need
B&G’s signature rotary controller. From the ultra-fast
processor, which offers seamless chart redraw and super sharp
· GoFree™ Wireless Technology
graphics, to the bonded glass, bright LED backlit screen, every
inch of the Zeus² has been engineered to provide style and
· Internal high-sensitivity GPS antenna
performance in the toughest of environments.
Zeus² integrates seamlessly with your network including
· Broadband Radar™ compatible
Broadband Radar, AIS, CZone Digital Switching and much
more. Perfect for the sailor who likes to spend more time on the
· Low power consumption
water than at the chart table, the Zeus² has an array of options to
help improve on water navigation and maximize sailing
· Video input/output
success.
· Integrated Pilot control
SailSteer: A composite sailing screen, which combines key
sailing data into one clear display. The SailSteer navigation
· NMEA 2000, 0183 and Ethernet compatibility
screen shows Heading and COG, Current Layline, Calculated
Tide, True Wind Angle indicator, Rudder Angle Indicator and
Opposite Tack Layline to name but a few features. All data is
shown relative to the boat—so it’s quick and easy to relate to
reality.
Integration - Integrate with your
GoFree: The most powerful multifunction display wireless
solution available anywhere!! Control and view your Zeus² via
marine electronics network for instant
your tablet—wherever you are. View data on a Smartphone and
data
carry a chartplotter in your pocket. Requires GoFree WiFi-1
Wireless Gateway Module (Model 14274047).
Enhanced Sail Navigation includes::
Feature Packed - Clearly locate and
·
SailTime calculations—no more reliance on ETAs
read information, use with radar,
and distances that are only useful for powerboats
sensors, instruments and much more
·
Enhanced Laylines—see your tacking angles on a
chart, even without an active waypoint
·
Enhanced Tides—internal tidal calculations and
Navionics® Dynamic Tides and Currents data
(requires Navionics cartography) ensure a clear
Enhanced Navigation - Calculations with
overview of tides and currents.
maximised Laylines to view tacking
Maximum Mapping: Zeus² comes preloaded with Insight
angles on the chart
USA cartography, thanks to its dual chart slot, sailors can also
choose to add C-MAP® and Navionics® mapping to their unit.
Order Number 7 inch Zeus 2 - # 000-11244-003
9 inch Zeus 2 - # 000-11189-003
12 inch Zeus 2 - # 000-11195-003
25
B&G Precision - Grand Prix
derived technology provides the
best sailing data possible
SailSteer - Combines essential sailing
data into one clear and informative
composite screen
Triton
Triton Displays
Offers zero condensation, 170° viewing angle and outstanding contrast. All this
with up to 30% less power draw than its rivals. Check out the latest information
from your wind system, sensors and more.
·
Large 4.1-inch Display
·
Bonded LCD
·
Full Colour
·
Low Power
·
Feature Packed
·
Easy To Use
·
B&G Precision
·
Expandable
Triton Sensors
Speed, Depth and Temperature from a single through-hull sensor.
·
Combined Speed & Depth
·
High Accuracy
·
Single Hull Fitting
·
Integrated Sea-temperature
Triton Wind Sensor. High performance wind speed and angle sensor, with all the
accuracy and quality you would expect from B&G.
·
High Accuracy
·
Rugged Construction
·
Race Proven Technology
·
Low Weight
HV Displays
Offers zero condensation and outstanding contrast, the perfect size for use on a
pedestal.
·
Bonded Glass Display
·
Large, red digit LED display
HVision bonded displays provide ultra clear instrument information with zero
condensation. HV Displays store 14 configurable pages, so whether you want to
see True Wind Angle, COG or SOG, getting the crucial information in the right
place is simple. 20/20 HV Displays are ideal mast displays for yachts in the 30ft to
50ft range
Broadband Radar
Award-winning Broadband 4G Radar radar will keep constant watch over you and
your crew. If you're taking on severe conditions, racing offshore through fog,
iceberg fields or at night, you'll be glad that Broadband 4G Radar has a 36nm
working range and can even see up to the bow of your boat.
·
36nm Working Range
·
Customisable Target Separation
·
B&G Precision
·
Low Emissions
·
InstantOn
·
High Target Separation
·
No Main Bang
Triton Pilot
Provides Intelligent Sail Steering, manual and auto steering functions, Smart
Manoeuvre and chartplotter integration all combined with intuitive menus for
ultimate control. Available in Low or High Current forms.
·
Intelligent Sail Steering
·
Chartplotter Integration
·
Smart Manoeuvre
·
Easy to Use
·
Integration
·
Intelligent Sail Steering
·
Steer to compass, true wind angle or apparent wind angle for optimum
sailing performance.
26
H5000
The arrival of the NEW H5000 instrument and autopilot system brings together sailingspecific features and powerful race-proven technology with speeds of up to 50 times greater
than that of its race-winning predecessor, the H3000.
H5000 Hydra CPU
H5000 Graphic Display
Key Features
·
Ultra-fast ARM Processors
The CPU achieves speeds of up to 50 times that of its predecessor, for rapid
calculation, real-time data and fast updates; each with the trademark B&G precision
·
Performance Wind Filter
Provides stable, accurate wind data for displays and the autopilot.
·
Flexible configuration
Tailor your Hydra setup to suit your application. H5000’s wide compatibility
provides swift, seamless integration with other instruments and electronics across
the B&G marine network including AIS, radar and chartplotters
·
Browser-based set-up
The CPU features browser-based setup via the new H5000 interface for fast,
efficient and hassle-free commissioning and calibration
·
GoFree™ Wireless Technology
Expand Hydra’s functionality even further with third-party apps and stream data
via GoFree, B&G’s powerful wireless solution to remotely view H5000 instrument
data via your tablet or smartphone. Requires wireless module.
·
LED status indicators
Status indicators on the CPU provide a clear indication of system status
H5000 Race Display
H5000 Pilot Controller
Key Features
·
Dedicated Pilot control
Developed to complement the H5000 Pilot Computer, this
Controller manages every function of this powerful and trusted tool
– from commissioning to control.
·
Glass-bonded monochrome display
The bonded glass LCD display is tough, waterproof and
condensation-resistant in the most testing environments with highresolution monochrome screen, with wide viewing angle, for
optimum readability and clear presentation of Pilot data in all light
conditions.
·
Straightforward interface
The controller’s dedicated keypad and intuitive operation makes
commissioning and control of the Pilot straightforward,
flexible and convenient.
Wide selection of the highest quality
sensor:
Wind, Speed, Depth, Heading,
Barometer, 3D Motion and more
27
·
·
·
·
·
Unique Sailing Features
SailSteer, Start Line, WindPlot for tracking weather trends, Laylines, MOB and more to
enhance your racing or cruising experience.
Smart, Straightforward Menus
Completely redesigned operating system provides straightforward access to powerful,
easy to understand, sailing features.
Bright, Colour Display
Tough bonded glass, AR coated, 5-inch colour display; sunlight viewable by day and with
backlight dimming down to almost zero for comfortable night time viewing.
Seamless networking
The H5000 Graphic Display is NMEA 2000® compatible for ease of integration into H5000
systems and your existing network.
Tough design - built to last
Tough, corrosion free, thermoplastic and glass construction providing you with the peace
of mind it can weather the elements – whether the spray of the race or the heat of the sun.
Ultra-Fast ARM Processor
Fast, modern ARM processor provides the power to deliver smooth graphical
displays at refresh rates of up to 10Hz.
H5000 Pilot Computer
Key Features
·
Bright, 5-inch bonded LCD display
The transflective H5000 Race Display is highly visible both in bright sunlight
and at night.
·
Visual Target Indicator
The Race Display’s unique bar graph gives you an instant visual on target
data, start time and more.
·
Low Power
Incredibly low power draw – perfect for offshore racing and blue water
cruising.
·
Tough Design - Built to last
No external metal parts and completely corrosion resistant, providing you
with the peace of mind it can weather the elements – whether the spray of the
race or the heat of the sun.
·
Seamless networking
The H5000 Race Display is NMEA 2000® compatible for ease of
integration into your existing network.
Precision
Sensors
Key Features
·
Broadband
4G Radar
Award-winning Broadband Radar will keep
constant watch over you and your crew.
Whether you're interested in short range
targets or longer range information, the
Broadband 3G Radar and Broadband 4G
Radar will provide the high levels of safety
and target detection that you expect from
B&G.
Key Features
·
Selectable steering modes
The H5000 Pilot CPU lets you elect to steer to Heading,
Wind or Waypoint.
·
AWA and TWA steering
The H5000 Pilot CPU can utilise Apparent, True or Polar
wind modes for optimum performance under sail.
·
Intuitive and responsive
Provides gust and high-wind response modes for rapid
response to changing conditions.
·
Optimum course keeping
Features auto response switching and recovery mode for
optimum course keeping in varying sea-states.
H5000 Hercules CPU
Hercules is packed with all the powerful features of
the Hydra system, but adds unique functionality for
serious racers.
H5000 Performance CPU
Performance is packed with all the powerful
features of the Hydra and Hercules systems, adding
unique functionality for larger racing yachts and
Superyachts
NAIS-400
See and be seen on the water with this
advanced AIS Class B transponder.
Automatically and dynamically share
and update your position to reduce
the risk of on water collision
Don’t forget you can
integrate everything Ÿ SonicHub
Ÿ Wifi-1
Ÿ VHF Radios
How does the Watt&Sea hydrogenerator operate?
The principle is simple: Watt &Sea hydrogenerator uses the speed of the sailboat to turn an immersed propeller. Like the
dynamo of a bicycle rubbing on the wheel the propeller in contact with the water flow produces electricity. Energy
production begins at a mere 3 knots of hull speed (Cruising model).
Cruising hydrogenerators
High performances system for cruising or offshore navigation's and long distance crossings, in total energy independence.
The Cruising range is a clean and quiet system to produce electricity, especially adapted to yachtsmen, sailors and offshore
navigations. Built in premium quality aluminium and with a nice design, Cruising hydrogenerators are light , robust, compact
and easy to install. Delivered with fastening kit, 240 mm propeller, power convertor-regulator and lifting- fastening bracket.
With optimal output and minimal drag, watt&sea’s Hydrogenerator™ outclasses existing systems (wind turbines and solar panels),
allowing you to navigate with positive energy and to recharge your batteries for worry-free mooring.
- High-grade Aluminum Construction
- Electronic Convertor
- Brushless Permanent-magnet Alternator
- Easy transom-mounting Lift Bracket
- Maintenance-free
Order Numbers WSPK1 - Long Leg Hydrogenerator
WSPK2 - Short leg Hydrogenerator
280P - 280mm Prop
240P - 240mm Prop
Nominal output : 500W
(40A in 12V; 20A in 24V)
Start-up speed : 3 knots
Voltage : 12V or 24 V
Weight : 8 KG
(3 KG convertor-regulator)
Dimensions :
Height - 116 cm or 80 cm;
Width - 38 cm
Aluminium leg : Delivered with
convertor-regulator and 240 mm
propeller
Warranty : 2 years against
manufacturing defects
28
Stainless Steel Handrails
Stainless steel tube 26 x 20mm with a neat oval shape for excellent
prehension. Supplied as standard with fastening plate. Blind mounting is
possible by bolting the hand rail through the deck, without fastening plate
(hardware not supplied)
Part No.
Hole Spacing
105045
200mm
105046
280mm
105047
380mm
105048
430mm
105049
585mm
106028
700mm
Handrails in Leather Sheath
Stainless steel tube 26 x 20mm with a neat oval shape for excellent
prehension. Supplied as standard with fastening plate. Blind mounting is
possible by bolting the hand rail through the deck, without fastening plate
(hardware not supplied)
Part No.
106859
106860
106861
106862
Hole Spacing
280mm
380mm
430mm
585mm
Custom Handrails
Goiot develops and produces custom handrails upon request : roundshape, oval-shape or in leather sheath (with a large selection of colours).
Please contact us.
Polished Stainless Steel Rub Strakes
Stylish guards protecting against chafe from caprails and gunwales.
Part No.
105041
105042
105043
105044
Length
203mm
304mm
457mm
700mm
Hole Spacing
124mm
115mm
118mm
133mm
Deck Plate to access Emergency Tiller
·
·
29
Stainless Steel deck plate with quick twist cover (1/8 twist).
Gives easy access to the shaft in order to set up an emergency
tiller system.
Spherical Stanchion Tube
Guardrail
hole
"A"
"B"
105505
2
610mm
310mm
105786
2
630mm
330mm
106665
2
630mm
105787
2
680mm
"C"
"D"
35mm
18mm
330mm
35mm
45mm
300mm
35mm
Cylindrical Stanchion Tube
Guardrail
hole
"A"
"B"
"C"
105897
2
610mm
310mm
35mm
105898
2
680mm
300mm
35mm
"D"
18mm
Gate Doors
Guardrail
Hole
"A"
"B"
Hole
Spacing
105789
2
615mm
330mm
280mm
115540
2
615mm
350mm
280mm
Stanchion Socket
115633 - Tube Diameter 25mm - M16 Threaded pin
Triangular Socket
97430 - Aluminium - Base Dimensions 93 x 88mm - with Reinforcing
bracket
30
808 Toe Rail
Designed to cover the deck-to-hull assembly, Goiot Toe rails are equally
suitable for wood or metal construction.
Anodised aluminium in natural colour, supplied in 6 metre lengths.
The angled and rounded shape offers a stylish and safe design. Drilled for
stainless steel flat clotted screws 6mm.
The toe rail construction allows for teak boards to be added as decoration.
Some accessories are designed for boats over 35 foot.
Toe Rail Order
Number
Length
808
6 metres 60mm
97818
A
B
Hole
spacing
Weight
47mm
200mm
6kg
808 Toe Rail Accessories
A
C
E
B
D
F
H
G
A - Set of Port-starboard short end fittings
B - Set of Port-starboard fairleads end fittings
C - Set of Port-starboard fairleads
D - Set of Port-starboard fairleads (boats > 35ft)
E - Middle fairleads
F - Middle fairleads (boats > 35ft)
G - Teak Board inserts
H - Aluminium Stanchion base 25mm
Order
Number
Length
A
B
Hole
spacing
Weight
A
97793
175mm
60mm
47mm
–
50g
B
97797
105mm
60mm
47mm
35mm
130g
C
97795
175mm
60mm
47mm
85mm
215g
D
97800
230mm
70mm
50mm
155mm
635g
E
105601
135mm
60mm
47mm
85mm
160g
F
97799
180mm
60mm
50mm
155mm
520g
G
105538
2m
–
–
–
–
H
97796
46mm
70mm
61mm
–
140g
Assembly
Connector
97798
120mm
33mm
90mm
–
95g
811 Toe Rail
Slightly angled profile and flat surface for a stylish line. Accessories in
cast aluminium come with a smooth and match the toe rail perfectly.
Rectanglar pitch of toe rail is 70mm long and 155m apart.
Description
31
811 Toe rail
End Fittings
Fairlead end fittings
Middle fairleads
Assembly
connector
Aluminium
stanchion base
27mm w/ plastic
Order
Number Length A
B
Hole
spacing Weight
97824
97801
97804
97767
105643
6m
70mm
180mm
150mm
15mm
55mm
58mm
52mm
55mm
58mm
44mm
50mm
45mm
45mm
47mm
112mm
–
61mm
59mm
–
97436
80mm
77mm 85mm 57mm
6kg
75g
305g
250g
36g
220g
822 Toe rail
Straight, more conventional shape toe rail with slightly curved flange.
Accessories made from aluminium casting are hand-polished.
The rectangular pitch of the toe rail is 70mm land and 155mm spaced.
Description
Order
Number Length A
B
Hole
spacing Weight
822 Toe rail
End Fittings
Middle fairleads
Assembly
connector
Aluminium
stanchion base
27mm w/ plastic
Aluminium
stanchion base
30mm
97831
97805
97807
105598
97783
6m
65mm
200mm
165mm
20mm
67mm
70mm
70mm
70mm
70mm
59mm
68mm
61mm
61mm
68mm
112mm
–
75mm
–
–
97437
77mm
72mm 40mm 60mm
220g
97438
76mm
70mm 40mm 60mm
220g
9kg
150g
470g
430g
55g
823 Toe rail
With a higher flange than the 822 toe rail, the 823 model provides a solution to a variety of installations whilst having a straight traditional profile.
Accessories in cast aluminium with a smooth finish.
Description
Order
Number Length A
B
Hole
spacing Weight
822 Toe rail
End Fittings
Middle fairleads
Assembly
connector
Aluminium
stanchion base
27mm w/ plastic
Aluminium
stanchion base
30mm
97841
97809
97811
97810
97737
6m
65mm
200mm
165mm
20mm
67mm
80mm
78mm
78mm
79mm
59mm
67mm
61mm
61mm
67mm
112mm
–
75mm
–
–
97437
77mm
72mm 40mm 60mm
220g
97438
76mm
70mm 40mm 60mm
220g
9.6kg
150g
470g
430g
55g
Aluminium Folding Cleat
Rounded and stylish lines bring an extra touch of style on deck combined
with increased safety.
Deck Mount : no need for the cleat to embedded in the deck.
Order
Number
103940
103941
103942
Rope
(mm)
12
14 - 16
16 - 20
A
(mm)
200
260
340
B
(mm)
60
80
115
C
(mm)
35
40
60
D
(mm)
100
130
150
E
(mm)
8
10
10
32
Sheet Cleat
Order
Number
103932
103933
A
(mm)
150
180
B
(mm)
23
30
C
(mm)
12
16
D
(mm)
45
45
E
(mm)
6
8
D
(mm)
35
50
65
80
75
E
(mm)
6
8
8
10
10
D
(mm)
35
50
65
80
75
E
(mm)
6
8
8
10
10
D
(mm)
55
45
32
E
(mm)
11
9
7
Mooring Cleat
Drilled Aluminium from above.
Order
Number
103897
103927
103898
103899
103900
A
(mm)
160
200
260
330
450
B
(mm)
30
45
55
60
70
C
(mm)
20
30
35
40
45
Mooring Cleat
Threaded Aluminium from below.
Order
Number
103897
103927
103898
103899
103900
A
(mm)
160
200
260
330
450
B
(mm)
30
45
55
60
70
C
(mm)
20
30
35
40
45
Mooring Cleat
Threaded Stainless Steel from below.
Order
Number
105178
105179
105180
33
A
(mm)
240
190
135
B
(mm)
50
42
31
C
(mm)
45
38
28
Stainless Steel Deck Filler
Model
Water
Waste
Waste
Petrol
Diesel
Order
Number
105234
117002
105235
117003
105236
A
(mm)
90
90
90
90
90
B
(mm)
78
117
95
95
95
C
(mm)
55
54
55
55
55
D
(mm)
37
37
E
(mm)
29
65
D
(mm)
37
37
E
(mm)
32
32
Aluminium Deck Filler
Model
Water
Waste
Waste
Petrol
Diesel
Order
Number
93618
105023
93620
105024
93616
A
(mm)
90
90
90
90
90
B
(mm)
80
80
80
80
80
C
(mm)
55
55
55
55
55
Fibreglass Deck Filler
Model
Order
Number
A
(mm)
B
(mm)
C
(mm)
D
(mm)
E
(mm)
Water
W/ Hose
Stopper
100746
90
80
55
37
38
Water
105776
90
80
55
37
38
Waste
105778
90
80
55
Petrol
105779
90
80
55
Diesel
105777
90
80
55
Spares for Deck Fillers
Product
Order Number
Stainless Steel Key
115127
Aluminium Deck Filler Cap for
93208
Lobe key
Aluminium Deck Filler Cap
93209
Stainless Steel Deck Filler Lobe
115128
Key
Plastic Key
105396
Plastic Deck Filler Cap
100760
34
Deck Hatches
Type of
navigation Lid
Range
Features
Cristal
Medium profile, heavy duty,
outwards opening
Opal
Tradition
Lower Frame Assembly
Finishing
CE areas for
location on
board
Blue water
One-piece
aluminium Extrusion
casting
With
Screws
Satin
II III & IV all
categories
I - Escape
Hatch
Low profile, outwards
opening through stays
Blue water
Extrusion
With
Screws
Satin,
Shiny or
laquered
II III & IV all
categories
High profile, heavy duty,
outwards opening
Blue water
One-piece
aluminium Aluminium
casting
With
Screws
Satin
II III & IV all
categories
Acrylic
Glue
Satin or
laquered
II III & IV all
categories
Light and Sturdy. Can be
in fisxed glazing to Coastal
Integration integrated
cruising or
increase ventilation.
Blue water
Outwards opening
6:
e 199
6 Ju n
1
f
o
ard
stand
om
trans
25 EC terline
/
4
9
r
it and
a
e
p
p
w
k
c
s
e
o
a
v
oard
rea I
oof, c
ure
ll abo
s on b ne I : hu k, coachr outside a d cockpit perstruct
o
s
u
Area
c
n
s
n
e
Z
a
f
o
d
i
k
c
Ÿ
ct
so
I:
re, de
ull se
one I
r face
Ÿ Z ne IIb : h perstructu deck, rea
o
u
d
s
Z
n
Ÿ
it a
II :
ockp
one I
Ÿ Z ne IV : c
o
Z
Ÿ
Extrusion
Casting
Integration Hatch
With a low-profile, lightweight construction and acrylic lid, this range is
ideally suited for the roof or the deck. The lower frame is engineered from
one-piece aluminium casting and therefore provides unequalled strength.
Its design is the prefect answer to yachtmen’s requirements for slim line
deck equipment. Integration hatches open out and can replace roof portlights, ensuring a better water draining. Glue mounting is a swift and easy
operation, which definitely reduces labour time at boatbuilders.
Ÿ Frame flange : 15mm
Ÿ Recommend : Sikaflex 292
20.10
33.14
27C
46.33
26.13
41.17
25.25
33E
Size
Order Number
Cutout Size (mm)
Overall Size (mm)
Radius Corner (mm)
Weight (kg)
20.1
102107
200 x 100
223 x 138
50
0.85
26.13
102110
260 x 130
283 x 168
65
1
33E
102122
347 x 156
387 x 208
1.5
27C
102113
278
318
1.6
25.25
102108
250 x 250
300 x 315
50
1.9
33.14
102118
347 x 156
387 x 211
50
1.8
41.17
102124
421 x 176
461 x 231
50
2.2
46.33
102126
457 x 327
497 x 382
50
4.2
35
Tradition Hatch
Goiot legendary Tradition hatches equip the most prestigious racing boats
and many service boats throughout the world. Construction consists in a
traditional high profile styling and a one-piece aluminium cast lid, for absolute watertightness and ultimate resistance and strength.
Size
Cutout
Order
Size
Number (mm)
34.20
102369
45.32
Overall
Size
(mm)
Radius
corner
(mm)
Weight
(kg)
Lid
Height
(mm)
340 x 195 395 x 272 41
2.4
40
102370
450 x 320 504 x 402 41
5.3
44
50.37
102371
500 x 370 554 x 451 41
6.7
46
50.5
102372
500 x 500 582 x 554 41
8
46
62.62
102373
620 x 620 701 x 674 41
12
48
Weight
(kg)
Lid
Height
(mm)
Two way Hatch
These hatches can be opened either fore or aft.
Size
Cutout
Order
Number Size
(mm)
Overall
Size
(mm)
Radius
corner
(mm)
50.50.2
102420
500 x 500 616 x 590 25
10.6
52
62.62.2
102438
620 x 620 736 x 710 25
15.3
52
Sliding Hatch
Designed to be used as a companionway hatch.
Size
Cutout
Order
Number Size
(mm)
62.62.6
102440
72.72.6
102442
Overall
Size
(mm)
Radius
corner
(mm)
Weight
(kg)
Lid
Height
(mm)
620 x 620 1309 x 709 41
14
79
720 x 720 1509 x 809 41
23
79
36
Opal Hatch
In the tradition of Goiot quality, the range of Opal hatches combines
optimum watertightness, easy installion and aesthetism thanks to real
tecnological breakthrough:
Ÿ Invisible hinges
Ÿ One-piece aluminium lid with a thick frame section to provide
optimum rigidity
Ÿ Slim lid height, 19mm for a teak deck installion
Opening Device
The ergonomic shape of the handles allows comfortable space for an
excellent prehension. The feature a lock catch which prevents breaking in
from outside. No need to any other locking system from outside.
Ÿ All models are equipped with adjustable stay.
Ÿ Adjustable opening is as simple as releasing the stay to obatin the
right position
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Flange frame : 15mm
Aluminium hinges
Acrylic thickness :10mm
Lid Height : 29mm
Telescopic stay (except on sizes 12, 18, 19, & 22
Hatches must be mounted on a flat surface, allowing +/- 1mm. Opal
hatches sizes 22, 44, 60 and 70 are allowed to be used as escape hatches
(zone 2b). 60 et 70.
37
Size
00
3
10
12
18
20
22
30
40
44
50
51
54
60
70
Product Number
116020
116021
116022
116483
116034
116023
116035
116024
116025
116026
116027
116008
116029
116030
116033
Cut Out Size (mm)
211 x 211
231 x 176
260 x 260
276
420
347 x 202
518
457 x 327
421 x 421
442 x 442
507 x 377
518 x 378
507 x 392
507 x 507
627 x 627
Overall Size (mm)
265 x 265
285 x 230
314 x 314
332.1
474
401 x 256
572
511 x 381
475 x 475
496 x 496
561 x 431
572 x 432
561 x 446
561 x 561
681 x 681
Radius Corner (mm)
42.5
42.5
42.5
42.5
42.5
42.5
42.5
42.5
42.5
42.5
42.5
42.5
Weight (kg)
2.5
2.6
3.2
3.1
4.9
3.5
7.3
5.6
6.2
6.7
5.4
5.6
7.2
7.9
10.8
Cristal Hatch
With a medium profile construction, the Cristal hatches combine stylish
design and shapes with a sturdy one-piece lid, engineered from aluminium
casting. We offer a wide range of sizes. Small hatches are especially
suitable for ventilation purpose and larger models are designed to be used
a foredeck hatches.
The lower frame is with a 12mm flange. Hatches are to be mounted on a
flat surface, allowing +/- 1mm.
Size
Order Number
Cutout Size (mm)
Overall Size (mm)
1
10
19
20
22
24
30
40
44
46
50
54
60
70
80
101741
101749
101845
101756
105157
101780
101802
101787
105282
101827
101884
105283
101920
101981
102022
263 x 213
263 x 263
476
349 x 204
520
387 x 263
464 x 334
423 x 423
444 x 444
464 x 464
514 x 384
509 x 394
510 x 510
630 x 630
802 x 802
308 x 269
308 x 319
520
394 x 260
567
432 x 319
509 x 402
483 x 463
587 x 510
532 x 509
559 x 452
552 x 460
579 x 555
699 x 675
865 x 846
Radius Corner
(mm)
53
53
53
53
53
53
53
53
53
53
53
53
53
Weight (kg)
1.6
1.8
5.8
1.6
6.1
2.3
5
3
4.7
6.5
6.2
5.9
8.1
12
24
Escape Hatch
Escape hatches are used on multihulls and can be made open either from
the inside or outside in of capsizing. They feature aluminium cast handles
and are supplied with a locking bar preventing access when moored. Using them when sailing is strictly forbidden. Following models are approved for all boat categories, as per the ISO/FIDS 122162002
Internationals Standards.
Size
Clearing
Order
dimensions
Number (mm)
Cut out
Size
(mm)
Overall
Size
(mm)
Radius
Corner
(mm)
Weight
(kg)
44C
105096
450
450
520
52
5.8
488 x 390
512 x 413 559 x 485 52
7.2
49.42 104971
38
Flush Hatch
After pioneering the flush hatch technology on Maricha IV, Goiot is proud
to introduce a range of standard flush hatches designed for production series boats. The flush models stem from the Opal range with the same sturdy sluminium frame, telescopic stays and ergonomic handles. A real
innovative breakthrough, the flush hatches features a lid with no metal
structure : thanks to a thicker acrylic lid (15mm) and state-of-the-art stainless steel hinges, the lid consists in the mere acrylic pane which definitely
brings an additional touch of elegance to the deck.
Size
10
44
60
Order
Number
115518
115519
115520
Cutout Size
(mm)
260 x 260
442 x 442
507 x 507
Overall
Size (mm)
330 x 330
512 x 512
577 x 577
Radius
Corner (mm)
42.5
42.5
42.5
Weight
(kg)
5.6
7.6
9
Spare Parts
Tradition Hatch
101691
Pair of Inside right/left handles
101686
Pair of Outside handles
101711
Aluminum latch for 45.32, 50.37, 50.50, 62.62 &
80.80
93476
Plastic Latch for 34.20
93477
Pair of inside & outside aluminium handles
Cristal Hatch
95330
Pair of small inside handles
101704
Pair of large inside handles
101687
Pair of outside handles
105743
Friction rings (x4)
101706
Friction set for 24.19, 24.24, 35.21, 36.14, 36.19,
36.24, 49.49 & 49.24
101708
Friction set for 42.42, 44.31, 44.44, 44C & 49.36
105020
Pair of inside & outside aluminium handles
Integration Hatch
101713
101704
Pair of large handles for 46.33
Evolution Hatch
95330
101690
Pair of large inside handles
Southern Seas Marine has many spare parts like :
Ÿ Acrylic
So Give us a call today with :
Ÿ Gasket
Ÿ The cut out size of the hatch
Ÿ Handles
Ÿ Type of hatch (if possible)
Ÿ Hinges
Ÿ Colour of the handles
Ÿ Stays
Ÿ Part you need
39
Shade & Mosquito Screen
Ÿ
Ÿ
Ÿ
Ÿ
Folding structure
Accordion-type
Fastening with clamps (Non-visible)
Colour : RAL 9016 White
Integration hatch is a simple pushfit flyscreen in the lower
frame and the rubber lid will hold it in position
Size
10
18
20
22
30
40
44
50
51
54
60
64
65
70
For Opal & Cristal Hatches
Order Number
115175
115448
115176
115449
115177
115178
115179
115447
115450
115181
115182
115451
115452
115183
Size
20.1
25.25
26.13
27C
33E
33.14
41.17
For Integration hatches
Order Number
101496
101520
101525
101535
101491
101544
101588
Interior Trim Ring
Ÿ Colour : RAL 9016 White
For Cristal & Opal Hatches
Size
Order Number
00
115353
3
115354
10
115306
18
115440
20
115355
22
115441
30
115356
40
115357
44
106086
50
115439
51
115442
54
115358
60
115359
64
115443
65
115444
70
115392
40
Areas
Portlights
Range
Type of
Lid
navigation
Features
on bo
Ÿ Z ard as per
o
9
Ÿ Z ne I : hull 4/25 EC s
o
ta
a
Ÿ Z ne II : dec bove wate ndard of 1
o
k
r
6 Jun
e 1996
Ÿ Z ne IIb : hu , coachroo line
o n e II
ll sec
f, coc
:
t
I
kpit a
ions o
Ÿ Z
:
s
u
p
nd
one IV
er
ut
: cock structure, d side area I transom
pit an
e
d dec ck and coc
k, rea
r face kpit
s of s
upers
tructu
re
Lower Frame Assembly
Finishing
CE areas for
location on
board
Satin,
colour
anodised
IIb, III & IV
I : Fixed Opal
Only (33-13R, 3313 &23-10R) hull
sides, roof and
cockpit areas
Cristal
Medium profile, heavy duty,
outwards opening
Blue water
Casting
Casting
Frame and
backplate
mounted
from inside
Opal
Low profile, outwards
opening through stays
Blue water
Extrusion
Extrusion
Frame and
backplate
mounted
from inside
Satin,
Shiny or
powder
coated
II III & IV
Deck, roof and
cockpit areas
Extrusion
Frame and
backplate
mounted
from inside
Satin,
powder
coated
II III & IV I :
Fisxed
Evolution
only. All
categories
Evolution
High profile, heavy duty,
outwards opening
Blue water
Extrusion
Cristal Portlight
With a one-piece aluminium construction, this range is especially designed
for in-hull installation. Engineered in casting, Cristal portlights are sturdy
and extremely durable. The outside frame is designed to allow water
draining up to 40 when opening the portlight.
Available in two versions for a minimum hull thickness of 5mm to a maximum of 26mm. Portlights should be mounted on a flat surface, allowing
+/- 1mm. They are supplied with blue arcylic and interior trim made from
extruded aluminium as standard.
O
41
Size
Cut out size
(mm)
Overall Size
(mm)
Radius
Weight (kg)
Corner (mm)
Hull
thickness 1626mm
Hull
thickness 515mm
CE
23.10R
281 x 251
303 x 173
62
1.8
99495
105273
I, IIb, III, IV
33.13
380 x 180
402 x 202
90
2.4
99504
105906
I, IIb, III, IV
33.13R
380 x 180
402 x 202
62
2.5
99519
105274
I, IIb, III, IV
43.18
480 x 230
502 x 252
115
3
99541
105907
IIb, III, IV
43.18R
480 x 230
502 x 252
62
3.5
99553
105275
IIb, III, IV
Opal Portlight
Designed to match the Opal Hatches, Opal portlights also feature some
unique benefits:
Ÿ Perfect watertightness with a one-piece thick frame section and
double contact seal system
Ÿ Acrylic thickness : 10mm
Ÿ One model only accepts an extensive range of bulkhead or hull
thickness :5 to 33mm
Ÿ Optimum visibility thanks to the position of the handle in the
frame
Overall Size
(mm)
325 x 178
369 x 193
Radius Corner
(mm)
56
56
Weight (kg)
106928
105268
Cutout Size
(mm)
303 x 156
347 x 171
115006
429 x 171
451 x 193
56
2.7
Rectangular
105269
627 x 171
649 x 193
56
3.8
05
Rectangular
106930
429 x 244
451 x 266
56
3.4
32
50
Oval
Rectangular
105125
105126
375 x 175
347 x 251
397 x 197
369 x 273
87.5
56
2
3
Size
Shape
Order Number
00
01
03
Rectangular
Rectangular
Rectangular
04
1.8
2
Evolution Portlights
The Evolution ports have lightweight strucure and are ideally suited for
the cockpit, the roof or superstructures. The acrylic lid is closing on an extruded profile frame. The 40 angled outside frame is designed to facilitate
water draining. Evolution portlights are available in two versions for a
minimum hull thickness of 5mm to a maximum of 26mm.
Size
Hull thickness
5 to 15mm
Hull thickness
16 to 26mm
Cut out Size
(mm)
Overall Size
(mm)
Radius Corner
(mm)
Weight (kg)
26.11PR
105276
99563
310 x 160
330 x 180
65
1.7
33.10P
105277
99574
380 x 145
400 x 165
72.5
1.7
33.13P
105278
99586
380 x 180
400 x 200
90
2.1
33.13PR
105279
99599
380 x 180
400 x 200
65
2.2
58.13PR
105280
99616
630 x 180
650 x 200
65
3.6
42
Opal Fixed Portlights
Fixed portlights are constructed from strong aluminium extrusion profiles,
satin finish, natural aluminium colour. Blue acrylic supplied as standard.
One single model covers an extensive range of hull thickness, from 8 to
30mm.
115350
Cutout Size
(mm)
303 x 156
Overall Size
(mm)
325 x 178
Radius Corner
(mm)
56
Rectangular
115270
405 x 156
427 x 178
56
2
03
Rectangular
115004
429 x 171
451 x 193
56
1.6
04
Rectangular
115376
627 x 171
649 x 193
56
3.6
06
Oval
105124
600 x 175
622 x 197
87.5
4.1
32
Oval
105847
375 x 175
397 x 197
87.5
1.8
Size
Shape
Order Number
00
Rectangular
02
Weight (kg)
2.2
Evolution Fixed Portlights
Fixed Evolution portlights come in aluminium finish, natural colour.
Available in four versions to accommodate virtually any hull thickness.
43
Size
8 to 16mm
12 to 20mm
16 to 24mm
20 to 28mm
Cut Out
Size (mm)
Overall Size Radius
Corner
(mm)
(mm)
Weight (kg)
33.13F
99624
99625
99626
99627
380 x 180
400 x 200
90
2
33.13FR
99629
99630
99632
99635
380 x 180
404 x 204
62
2.1
58.13FR
99641
99642
99643
99644
630 x 180
654 x 204
62
3.3
Flyscreens
Cristal Ports
Opal Ports
Evolution Ports
23.10R
99489
01
106620
26.11PR
99568
33.13
99509
03
115854
33.10P
99578
33.13R
99511
04
106621
33.13P
99509
43.18
99546
05
115848
33.13PR
99511
43.18R
99548
32
106618
58.13PR
99622
50
106619
Spare Parts
Cristal Ports
Gasket
95663
Opal Ports
95664
Gasket
95664
Handles
115517
Acrylic
26.11PR
99274
99250
Acrylic 00
115509
33.10P
99306
99264
01
115510
33.13P
99280
99252
03
115512
33.13PR
99269
99265
04
115513
58.13PR
99277
05
115514
32
115516
50
115515
Acrylic
23.10R
99284
33.13
33.13R
43.18
43.18R
Gasket
Evolution Ports
Quick Closing Vent
A totally re-designed vent, with an aluminium body for ultimate resistance
and a user-friendly opening/shut off device.
Ÿ Hull thickness : 5 to 17mm
Ÿ Same cutout diameter as other Goiot vents so that they can be interchangeable.
Ÿ Mounting is operated from inside allowing blind fastening from
outside
Ÿ A rubber seal provides watertightness and eliminates the need for
additional sealant. Quick assembly combined with a neat finish.
Ÿ Opening/shut off system in ABS system equipped with pop-out
knob ON/OFF, for swift and easy operation
Order #
105033
Overall
173mm
Drill
75mm
Height
45mm
Weight
1kg
44
Steering & Bearing Equipment
Stainless Steel, Aluminium, Carbon
and Wood Steering Wheels
Standard Jefa Steering wheels are produced in stainless steel 316
and are available in polished version and covered with leather.
The Jefa Aluminium 6082 steering wheels are produced without any welding at all and are only available with a fitted leather cover.
Jefa Carbon wheels are light, stiff and strong construction as the carbon
fibres overlap in the wheel without any joints at all.
The teak rimmed Jefa steering wheels are equipped with stainless steel 316
spokes and hub and cover a range from 700 mm to 1000 mm overall
diameter in steps of 100 mm. The teak rim is painted with a 2 component
polyurethane paint.
Cable steering components and pedestals
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
WP100 to 400 cable steering pedestals
WP800 Racing steering pedestals
WP850 “A” Frame steering pedestals
WP900 Swinging steering pedestals
Bulkhead steerers
Chain and Wire sets
Cross wire and parallel wire idlers
Open wire sheaves
Radial and 80 degree Quadrants
Conduit fittings, cable and terminal units
Rack and Pinion Steering Components and Pedestals
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
45
WP100 to 400 rack and pinion steering pedestals
Stop ring and rack and pinion geometry
Draglinks
Tiller levers and autopilot levers
Rack and Pinion extension tube
Transmission Steering Components and Pedestals
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
TS100 to 400 transmission steering pedestals
Steering bevel boxes
Bevel boxes
Transmission autopilot drive
Bevel reduction gear boxes
Reduction gear boxes
Universal joints, torque tubes & flange bearings
Draglinks
Tiller levers
Hydraulic Steering Components and Pedestals
Ÿ H200 to 400 hydraulic steering pedestals
Ÿ Hydraulic cylinders and accessories
Ÿ Tiller levers and autopilot levers
Autopilot Drive Units
Ÿ Linear drive autopilot drive units ( 20’ to 45’)
(to combine with all mechanical steering systems)
Ÿ Direct drive autopilot drive units (30’ to 70’)
(to combine with all mechanical steering systems)
Ÿ Transmission drive units (30’ to 95’)
(to combine with transmission steering systems)
Ÿ Sprocket drive units (30’ to 75’)
(to combine with cable steering systems)
Ÿ Compact autopilot drive unit ( 20’ to 45’)
(to combine with rack & pinion steering systems)
Please contact us about any Jefa Steering products.
46
AP-1 Autopilots (Plug & Play)
The Jefa AP autopilot is the answer to the request from
the market for an affordable and easy to operate stand
alone autopilot. The development has been inspired by
many years of experience in the successful production
of Jefa autopilot drive units. Special attention was
given to an intuitive and user friendly control panel
which is 100% water tight. The three dimensional
integral compass (also used in high end defense
missiles) ensures an extremely steady course also at
high seas.
The Jefa AP1-12 autopilot is suitable for boats up to 45 foot. The
continuous output on 12 volts is 7 Amps and the peak output is 15 Amps.
Order number
AP1-12
AP1-12-LD
AP1-12-DD
Description
AP-1 autopilot 12 volt
AP-1 with Linear Drive - 12volt
AP-1 with Direct drive - 12 volt
Basic Rack and Pinion Steering Components and Pedestals for a 30
to 40 Foot Yacht/ Boat
Standard RP150 Set up
Steering Pedestal - 710mm High
Stop Ring
Draglink (made to measurement)
Tiller Lever (made to measurement)
Steering Wheel (800, 900 or 1000mm) Stainless Steel or Leather
covered
Additional Extra Options
Instrument Head on Guardrail (Duo, Trio, Quad or Radar)
Engine controls (mounted on side of pedestal)
Cockpit Table bracket
Large Head (For Chartplotter, instruments and control buttons)
RP-150-71
RPSTOP
DL
TLJ
WHS
INST-(size)
EC150
CT150FIT
HD150-3
Compact Autopilot Drive
The Jefa compact drive is a strong and compact integrated autopilot drive
and much more efficient than existing hydraulic and electro-mechanical
linear autopilot drive units. It's build for 24 hours per day continuous
operation with a total weight of only 9.7 Kgs. The drive can be used on
boats from 20 to 45 foot l.o.a. (or up to 100 Kgm rudder torque) equipped
with a Jefa mechanical rack and pinion steering system.
Order number
Description
DU-CD-12
Compact Autopilot 12 volt for RP100-400
DC-CD-RFB
Integrated rudder feedback unit for Compact Drive
DU-CAB-G
Garmin cable and plugs mounted to drive unit
Separate rudder feedback unit
- In combination with a drive unit not made by Jefa
- Order Number - DU-RF-EXT
47
Rudder stocks in Aluminium and Stainless Steel
As every rudder stock is different, we always produce them to the specific
customer requirements. In general the designer of the yacht specifies the
material and dimensions. We can be of assistance if a calculation for a
Different material is required or if the design has to be modified for a more
economic production.
Roller Bearings, Self-aligning Roller Bearings
And Custom Made Bearings
Choose from: bottom roller bearings, self-aligning bottom roller bearings,
conical self-aligning bottom roller bearings, top roller bearings,
self-aligning top roller bearings, top roller bearings with cover for
emergency tiller and lock ring on ball race, self-aligning top roller bearings with cover for emergency tiller and lock ring on ball race, GPR selfaligning bottom roller and custom made roller bearings.
Sealing Systems:Lip Seals, Gaiters, O-rings
and Rudder Tubes
The sealing system is one of the most important parts of the rudder system.
A leaking sealing system is irritating and dangerous. A lot of development
has been done in the last decade to guarantee a problem free system. The
best solution is a sealing system that doesn't rely on the position of the
shaft (like a Gaiter) or to use a seal or tube in the inner housing that will
move together with the shaft.
Tiller heads, Emergency Tillers and Locking Rings
Tiller heads are available in two sizes. The bases of the tiller heads are
made from anodised seawater resistant aluminium 6082 (AIMgSI1), the Uprofile for the tiller is made of stainless steel 316.
Locking rings are made of anodised seawater resistant aluminium 6082
(AIMgSI1) and contain stainless steel set screws to achieve a perfect locking on the shaft. Between a locking ring and the bearing we always supply
a delrin ring for a smooth rotation. For super smooth running applications
we can supply a delrin ring with a ball race.
Emergency tillers are made of seawater resistant aluminium 6082
(AIMgSI1). Special shapes and types can be made upon request.
48
Washers with a Ball Track
The Jefa washers with a ball track are used in combination with a locking
ring to provide a smooth and light running vertical locking system.
The washer with balls replaces the standard delrin ring which acts as a
gliding bearing and is normally positioned between the top bearing and
locking ring above.
The washer with balls is made of delrin and the balls are made of delrin.
The maximum working load varies depending of the diameter from 100 to
300kg.
Deck Covers for Emergency Tillers
Deck covers for emergency tiller, made in black or silver anodised
aluminium 6082 from solid bar ( not cast). The covers can be released with
a winch handle.
Stainless Steel and Aluminium Sleeves
The Jefa rudder sleeves are made from tubular bar machined at the in- and
out-side. The inside is machined to a “gun barrel” shape for the best bonding to the rudder shaft. The outside is machined to a tolerance of +0.000.05 mm. The Jefa sleeves are made to suit the specific requirement in
stainless steel 316 and anodised aluminium with a wall thickness of 3 to 3.5
mm.
Please contact us about any Jefa Bearing products.
49
GFR Series
With Admiral GFR Series, you can easily put on and take off the line on your gennaker furler.
The GFR series furlers are designed for asymmetric spinnakers.
They are also made of high quality aluminium (6082T6) and anodized against corrosion.
In the beddings, torlon and stainless steel balls are used.
The rubber part on the swivel prevents banging against the mast; and the split part on the drum allows the line to be easily
taken out and put in the drum; without having to disassemble the continuous line assembly on the deck.
The furlers are very powerful and have a very high safety limit (the breaking point is 2.5 times the safe working load).
They come in 4 models:
Model
GFR1
GFR 2
GFR 3
GFR 4
Boat length
in metres
6 - 10
10 - 14
14 - 21
21 - 29
Boat length
in feet
20 - 33
33 - 46
46 - 70
70 - 95
GF Series
With Admiral GF Series, you can easily put on and take off the line on your gennaker furler.
Model
Boat Length
Working load
GF 1
6 - 10 m / 20 - 33 feet
1600kg
GF 2
10 - 14 m / 33 - 46 feet
2800kg
GF 3
14 - 21 m / 46 - 70 feet
5200kg
GF 4
21 - 29 m / 70 - 95 feet
7800kg
50
Race & Reef Genoa Furler
The distance between the foot of the sail and the deck is usually about 25 cm to 40 cm on the standard furling systems used on the
deck.
The racing boats with furling systems have a special need to minimize the distance between the foot and the deck.
To fill that need the furling producers have developed and released the race furling systems. However in these new race furling systems, the Genoa can only be entirely furled or unfurled; therefore it is not possible to reef and use the Genoa in various sizes depending on the strength of the wind.
On the drum that rolls the furlers, there is just one line of rope and when trying to reef,
the rope slips back making it impossible to reef.
Admiral Marine Equipment has developed the Race & Reef Furling Systems that made it possible to:
1) Minimize the distance between the foot of the sail and the deck,
2) Reef and use the Genoa in any size depending on the strength of the wind.
Model
RRO 35
RRO 44
Stay Ø
6 - 8mm
10 - 12mm
Rollmaster Furler
Rollmaster is a manual furling system with reduction.
The aim of Rollmaster is to enable sailors to save their power and endurance; not to get exhausted while
dealing with the forces of nature; and give them joy of sailing. The force required to roll the sail with this system is only half of
what is required for the standard manual systems. The size of the driving drum with the 1/3 reduction system; has been reduced so
that only ½ the force is required in comparison to the standard manual furlers.
In the sample product; the driving drum on the 1/3 reduction, having a 109 mm diameter; requires only ½ of the force of an equivalent standard system. Should the same power be obtained without the reduction; then the driving drum would have a diameter of
327 mm. Due to the reduction of the size of the driving drum, the starboard-portside dimension of the Furler is
also decreased; thus interference of the anchor handle connected to the windlass and the driving drum, is
prevented and the foot of the sail can be lowered as much as possible; and serious gain in the sail area at the foot of the sail which
has the least heeling effect on the boat, is obtained.
The lower connecting sheets can be rotated and fixed at all positions of 30º angles.
It is desired that especially the most eye-catching equipment on boats, should add an aesthetic
value to the unity of the boat. When Rollmaster was designed; emphasis was put on its aesthetic
look,along with its functional advantages. Reliable equipment is an important factor for success.
Model
Stay Ø
ROM 35
6 - 8mm
ROM 44
10 - 12mm
51
Genoa Furler
Electric (AE - Series)
- Admiral Electric Furlers are
made of corrosion-resistant
aluminum and anodized.
- The stainless steel parts are
AISI quality stainless steel.
- The gears are certified
aluminum-bronze alloy.
Electric Drives
Model
Forestay Ø
AE 500 / 12v - 24v
10 - 12 - 14mm
AE 1000 / 24v
14 - 16 - 19mm
AE 1500 / 24v
22 - 26mm
Hydraulic (AH - Series)
-Admiral Hydraulic Furlers are
made of corrosion-resistant
aluminum and anodized.
- The stainless steel parts are
AISI quality stainless steel.
- The gears are certified
aluminum-bronze alloy
Hydraulic Drives
Model
Forestay Ø
AH 12
10 - 12 - 14mm
AH 32
14 - 16 - 19mm
AH 40
22 - 26mm
52
Genoa Furler
Round Profile (R - Series)
Model
Stay Ø
R 30
4 - 5mm
R 36
6 - 8mm
R 45
10 - 12mm
R 54
14 - 16mm
Oval Profile (RO - Series)
Model
53
Stay Ø
RO 35
6 - 8mm
RO 44
10 - 12mm
Professional Series Furler
Admiral Professional Furlers are special design furlers which are mounted very close to the deck, allowing a maximum luff length.
Model
Stay Ø
PRO 35
6 - 8mm
PRO 44
10 - 12mm
Mainsail Furler
With Admiral Mainsail Furlers you can furl and unfurl your main sail without heading to wind. Electric and hydraulic mainsail
furlers are custom produced upon order.
Admiral Mainsail Furlers consist of standard manual and inmast as well as hydraulic and electric types which are for masts over 25
m long.
With these systems which are out of the mast, on boats with 2,3 or 4 pieces of sail, you can furl your sail or reef it just by loosening
the boom, without turning to the wind and without damaging the other sails.
Model
Stay Ø
AR 36
6 - 8mm
AR 45
AR 54
10 - 12mm
14 - 16mm
54
Quick Reef
By
This automatic reefing system is the ideal solution for reducing sails easily and avoiding friction on grommets. Combined with a
set of deck blocks in the boom, you can directly take in reefs from the cockpit.
Quick Reef’s multiple benefits:
Ÿ Installation on 2 existing Ruthgerson grommets (25mm and 35mm)
Ÿ Only one sheet to cockpit (using blocks in or on the boom)
Ÿ Minimises friction on grommets and rope wear
Ÿ Easy installation : Only one screw, one nut (supplied)
Ÿ Optimises the sail aerodynamics performance : the sail is correctly centred on the boom.
Mounting
Mounting is very easy :
1. Mount both cheeks of the reefing system on each side of a
grommet and place the sheave inside.
2. Position the screw in the sheave. Make sure the screw is
positioned downwards.
3. Fasten the nut onto the screw to hold the unit. Follow the
same procedure with the second grommet.
Order Number
Size
Max. Rope Size
105737
25mm Grommet
8mm
105738
35mm Grommet
12mm
Rescue Laser Light
The rescue laser light is hand held day and night time laser signalling device that provides a convenient, effective way to signal a rescue party. It’s waterproof (up to 80m), rugged design combines the safety of a laser
signalling device with the convenience of a flashlight. These are the compact models preferred by military,
hikers, kayakers, and other outdoor enthusiasts that want to minimize weight.
55
Order Number
Colour
Visibility
Laser Diode
Life
Operational Battery
life
Warranty
SOS-5564
Red
32km (night)
1.6 - 4.8km (daytime)
10000 hours
40 hours
lifetime
SOS-5565
Green
48km (night)
4.8 - 8km (daytime)
5000 hours
5 hours
180 days
The Original Boombrake
If there ever was a pleasure, it’s sailing before the wind! Until
now, this pleasure could never be properly enjoyed because of
the ever-present possibility of untimely gibing and the dangers
it causes, especially in strong winds and heavy seas: damage to
mast and sails, ripped off deck fittings, cracked skulls and yes,
loss of lives! The Original Boombrake has changed all that;
the most dangerous sailing manoeuvres are now child’s play!
Model 203 – SUIT YACHTS FROM 28 TO 39 FEET
Ÿ
MAINSAIL AREA TO (APPROX) 30 M
Ÿ
UNIT WEIGHT :- 1.97 Kgs
Ÿ
LINE SIZE:- 8mm
Ÿ
DIMENSIONS :- 230 x 190 x 72mm
Ÿ
Ÿ
UNIT WEIGHT :- 3.545 Kgs
Ÿ
LINE SIZE:- 14mm
Ÿ
The Original Boombrake operates on the principle of using
the natural energy of the wind and tension on the line adjusted
by the crew. The stronger the wind, the grater the friction on
the line against the drum and the greater the braking effect on
the boom, which is now moving slowly, gently, or barely at all.
No part of the device is in motion. The Original Boombrake
is immensely strong, made in Australia of anodized marinegrade alloy, saving all important weight on the boom. Wear on
the line is insignificant as there are no moving parts and rigging the Original Boombrake is no more difficult than setting
up a standard vang!
Ÿ
Ÿ
UNIT WEIGHT :- 5 Kgs
Ÿ
LINE SIZE:- 14mm
Ÿ
NOTE: THIS MODEL COMES WITH STAINLESS STEEL ARMS
SOS Dan Buoy
The SOS Dan Buoy is man over-board equipment, ready for instant deployment. The ultra-fast and reliable self-righting properties
ensure that just when time matters most, the SOS Dan Buoy is always ready. It increases vital visibility and buoyancy for the person overboard. Highly portable safety device, iPad size, compact and self-contained, using a 33 gram cylinder. SOS Dan Buoy is
the perfect choice when you want to be found.
- SOS Dan buoy is packed into a portable valise- compact, ready to use. Tested to elements of ISO 12402.
- Self- contained disposable CO2 inflation system – same mechanism as an inflatable lifejacket.
- A large drogue (40cm x 60cm) to reduce downwind drift. This is designed along life raft specifications.
- The SOS Dan buoy marker allows the person overboard to place their arms through the webbing loops, giving an extra
sense of security and stability, especially when fatigued, until help arrives.
- SOS Marine has made every effort to augment visibility. The fluorescent yellow, 2.5 metres streaming ribbon waves back
and forth in a breeze, allowing it to be seen up to 1700 metres.
- Fitted with an automatic SOLAS light for night rescues and SOLAS grade high-visibility, retro-reflective tape.
- Easy maintenance and service. Light (weighs 4 kg) and compact fo0r transport and stowing on all vessels.
- Service window: provides the added benefit of detecting, at a glance, that the SOS Dan Buoy is set to go. There is also a
service reminder inside the flap.
- Reusable and re-packable – only requires a replacement cylinder and activation cartridge.
- The SOS Dan Buoy has the extra benefit of removing the drogue and attaching an anchor, so it can then be used as a
temporary marker for wrecks, channels and dive or crash sites at sea.
- The ultimate Dan Buoy for all size vessels. Introducing a new level of safety for man- overboard.
- Order Number - SOS-6375
56
Bow & Stern Thrusters
Tunnel Thrusters
Retractable Thrusters
57
Electric Tunnel Thrusters
A complete range of 12-24 volt composite electric tunnel thrusters is
available for motor yachts and deep footed sailing yachts from 5 to
26 metres.
Designed for performance and durability, each model is easy to fit,
highly cost effective, and integrates a variety of unique features.
Ÿ Patented composite drive legs, maintenance-free
Ÿ Case hardened spiro-conical gears
Ÿ No anodes required
Ÿ Purpose built DC motors
Ÿ Electronic control boxes for unrivaled safety features
Ÿ Safe, high power connections
Ÿ Purpose built high specification DC contactors
Ÿ Line shields
ern thanks
e st
n be fitted at th
Each model ca nge of stern adaptors.
to our ra
Power
12 Volt
24 Volt
Model
Order Number
Thrust up to
Propellers
Power
Weight
CT35
42529
35kg
Single
2.7 kW/ 3.6 HP
9.6kg
CT45
317603
40kg
Duo
3.2 kW/ 4.3 HP
9.7kg
CT60
42530
58kg
Single
4.4 kW/ 5.8 HP
14.7kg
CT80
42532
69kg
Duo
4.8 kW/ 6.4 HP
15kg
CT100
42534
96kg
Duo
7.1 kW/ 9.5 HP
24kg
CT60
42531
63kg
Single
4.4 kW/ 5.9 HP
14.8kg
CT80
42533
75kg
Duo
5.3 kW/ 7.1 HP
15.1kg
CT125
42535
115kg
Duo
8.6 kW/ 11.5 HP
24kg
CT165
317557
160kg
Duo
11.9 kW/ 15.9 HP 36kg
CT225
317558
195kg
Duo
15 kW/ 20 HP
CT300
317606
255kg
Duo
19.7 kW/ 26.4 HP 58kg
CT325
42542
255kg
Duo
19.7 kW/ 26.4 HP 59kg
37kg
Electric Retractable Thruster
Compact Retract
Retracble thrusters are ideally suited to modern sailing yachts. When
deployed, retractable units offer optimum immersion depth and
exceptional power efficiency. When retracted, hulllines are left smooth
and unaffected.
Designed for yachts from 9 to 16 metres. This lightweight electric
retractable thruster, the first of its kind, has been a major success with
shipyards from the start.
Ÿ Lightweight composite construction
Ÿ Lowest profile and smallest hull opening on the market
Ÿ Bolted onto flange, not directly laminated into the hull
Ÿ Rapid depolyment
Ÿ No exposed moving parts inside yacht
Ÿ Splash resistant inside yacht
with
is delivered
Ÿ Intelligent position detection Compact Retract ntrol system cable
k and co
grey joystic
Order Number
Voltage
Power
Compact 70
317821
12 volt
Compact 80
317822
24 volt
Thrust
Propellers
Weight
4.79 kW/ 6.4 CV 70kg
Duo
40kg
5.28 kW/ 7.1 CV 85kg
Duo
40kg
58
Stern Pod Thrusters
The Max Power Stern Pod offers an innovative solution to the often difficult task of installing a thruster in the stern of modern motor yachts.
Combining a dry area on the stern with correct immersion depth and sufficient access is often a challenge.
Designed with these constraints in mind, Stern Pod units can be installed
entirely from the outside of the transom, reducing greatly the need for inside access. This allows greater immersion depth to be achieved.
The Stern Pod housing is waterproof and ignition protected (ISO 8846)
designed to withstand the corrosive damp atmosphere of the bilge.
Entirely assembled and tested in our factory, Stern pod units guarantee
long term trouble-free operation with only minimal maintenance care.
Power
12 Volt
24 Volt
Model
Order Number
Thrust up to
Boat Size
Power
Weight
CT45
317625
40kg
6 to 10.5 metres
3.2 kW/ 4.3 HP
21kg
CT80
317628
69kg
8.5 to 14 metres
4.8 kW/ 6.4 HP
31kg
CT100
317630
96kg
9.8 to 15.5 metres 7.1 kW/ 9.5 HP
41kg
CT80
317629
75kg
8.5 to 14 metres
31kg
CT125
317631
115kg
10.5 to 18 metres 8.6 kW/ 11.5 HP
CT165
317632
160kg
12 to 20 metres
11.9 kW/ 15.9 HP 61kg
CT225
317633
195kg
14 to 22 metres
15 kW/ 20 HP
VIP150
4.8 kW/ 6.4 HP
41kg
61kg
Electric Retractable Thruster
The largest electric thruster in the Max Power range, the VIP
150 electric is a vertically retracting DC thruster.
Available in two thrust ratings: 12V & 24V, the VIP 150
Electric is particularly well suited to boats from 45’ to 60’.
High performance & excellent reliability have made this unit
an industry standard for nearly 10 years.
Recently upgraded the VIP 150 Electric offers a new control
system and all the safety features common to Max Power bow
and stern thrusters.
ck
ed with bla
ct is deliverstem cable
ra
et
R
t
ac
p
Com
control sy
joystick and
59
Order Number
Voltage
Power
Thrust
Propellers
Weight
VIP150 12v
35023
12 volt
7.1 kW/ 9.5 HP
96kg
Duo
40kg
VIP150 24v
35024
24 volt
8.6 kW/ 11.5 HP
115kg
Duo
40kg
Hydraulic Tunnel Thrusters
Max Power’s hydraulic tunnel thrusters are suitable for medium to heavy displacement high windage vessels from 12 to 26
metres.
Designed for durability and performance, hydraulic tunnel
thrusters are ideal when long runtimes are required. Manufactured from corrosion-free components, these models are robust and water resistant.
The nature of hydraulic power allows these systems to provide proportional thrust control. Offering variable thrust caters for a wide range of conditions.
e stern thanks
n be fitted at th aptors.
ca
el
od
m
h
ac
E
stern ad
to our range of
Size
Order
Number
Tunnel
Diameter
Cubic
Centimeters
Hydraulic
Power
Maximum
thrust
Propellers
Weight
CT125HYD
317589
185mm
6 cc
6.5 kW
115kg
Duo
12 kg
CT125HYD
317590
185mm
8 cc
9.5 kW
115kg
Duo
12 kg
CT125HYD
317588
185mm
11 cc
9.3 kW
115kg
Duo
12 kg
CT225HYD
317591
250mm
11cc
13.5 kW
200 kg
Duo
19 kg
CT325HYD
317598
315mm
14 cc
19.5 kW
275 kg
Duo
24 kg
CT325HYD
317599
315mm
19 cc
19.5 kW
275 kg
Duo
24 kg
Hydraulic Retractable Thruster
When performance is paramount, hydraulic retractable thrusters provide a
perfect solution.
Lightweight, powerful and allowing near perfect weight distribution : designers and prestigious yards have consistently specified Max Power
thrusters over the years.
Hydraulic flow and pressure can be customised to suit hydraulic system
specifications. Many of the larger units in this range are manufactured to
order.
Dimensions (mm)
VIP 150HYD
A
290
12 volt Control
317702
B
290
24 volt Control
317703
C
580
Max. Thrust
120kg
D
185
Hydraulic Power
10kW
E
810
Propellers
Duo
F
240
Weight
28kg
VIP 250HYD
24 volt Control
Max. Thrust
Hydraulic Power
Propellers
Weight
317705
200kg
13.5kW
Duo
37kg
A
B
C
D
E
F
Dimensions (mm)
360
360
620
250
950
295
60
24 volt Control
Max. Thrust
Max. Hydraulic
Power
Propellers
Weight
24 volt Control
Electrohydro
Max. Thrust
R200/6
317801
10kg per
kW
R200/8
317802
10kg per
kW
8kW
A
500
B
355
12kW
C
320
Duo,
2 blades
35kg
Duo,
2 blades
35kg
D
200
E
255
R300/15
317807
R300/21
11kg per
kW
317809
11kg per
kW
Max. Hydraulic
Power
11kW
17.6kW
Propellers
Duo,
3 blades
73kg
Duo,
3 blades
73kg
R450/34
317813
11kg per
kW
R450/40
317814
11kg per
kW
Weight
Lift pump Control
Max. Thrust
Max. Hydraulic
Power
33kW
40.33kW
Propellers
Duo,
5 blades
165kg
Duo
5 blades
165kg
Weight
Lift pump Control
Max. Thrust
Max. Hydraulic
Power
Propellers
Weight
Dimensions (mm)
R600
317819
12kg per
kW
83.33kW
Mono,
4 blades
320kg
Dimensions (mm)
A
665
B
500
C
450
D
300
E
360
Dimensions (mm)
A
940
B
748
C
460
D
450
E
540
Dimensions (mm)
A
1210
B
967
C
985
D
600
E
772
Custom Services
Several versions of each RetractTM model are available.
Hydraulic flow and pressure can be customised to suit hydraulic
system specifications.
Many of the larger units in this range are manufactured to order.
Specified by designers and architects alike, these technically
superior retractable units are supplied to many of the world’s
finest custom yacht builders.
For more in-depth information on this range please contact us 07 55029 666
61
Model
Order Number
Horse Power
kW
Flow
Pressure
Motor
R200/6
317801
10.72
8
22 LPM
220 Bar
6 cc
R200/8
317802
16.08
12
30 LPM
240 Bar
8 cc
R300/15
317807
14.74
11
29 LPM
240 Bar
15 cc
R300/21
317809
23.59
17.6
44 LPM
240 Bar
21 cc
R450/34
317813
44.23
33
90 LPM
220 Bar
34 cc
R450/40
317814
54.06
40.33
110 LPM
220 Bar
40 cc
R600
317819
111.7
83.33
200 LPM
250 Bar
60 cc
Order Number
Descrption
317801
Retract R200/6 24 Volt (Complete Package)
317802
Retract R200/8 24 Volt (Complete Package)
317807
Retract R300/15 Electro Pump 24v (Complete Package)
317809
Retract R300/21 Electrohydro (excludes Electro-pump)
317803
Thruster Assembly R200/6
312950
Electronic Controller VIP/R200
318224
Joystick VIP & Retract Grey
316504
Max Power Distribution Block
313456
Tank 8ltr White Complete (filter etc)
35017
Fuse Holder T1
35020
Fuse 200A T1 for Thrusters
318401
Battery Cut-off Relay 24 volt
316511
Electro Pump BK8/8.5cc
634136
Motor Support (2 pcs)
317804
312950
Electronic Controller VIP/R200
318224
316504
313456
35017
Fuse Holder T1
35022
318401
316509
Electro Pump BK13/11cc
634136
317810
633652
Electronic Controller R300
318224
316501
313450
35017
Fuse Holder T1
35022
318401
316509
Electro Pump BK14/11cc
634136
316515
Lifting Pump R300 (> 2007)
317809
R300/21 Package includes
317811
633652
318224
316501
316515
Electronic Controller R300
Lifting Pump R300 (>2007)
Thruster Assemblies
317813
317814
317819
Retract R450/34 (Thruster Assembly ONLY)
317813 - R450/34
317814 - R450/40
Additional Components
316515
317820
318224
Lifting Pump R450
Electronic Controller R450 + Kamewa option
313352
Power Lift R600
Control Box (upon request)
Full Package Units
317801
317802
317807
317819
R600/60 Additional Companents
318224
62
GRP Tunnels
Manufactured from fully isophtalic resin and pre-gel coated,
Max Power’s high quality tunnels feature the added benefit of
a first coat of matt before being filament wound.
Tunnel
Length
CT60/80/100
CT35/45 - /125 CT165/225 - CT300 - CT325 125mm
250mm
300mm 315mm
185mm
500mm
42546
750mm
42547
1000mm 313804
42549
42550
42553
42551
42554
1250mm 313809
1500mm
2000mm
2500mm 42548
42552
363811
35004
313812
42557
42555
Mounting Bases
Mounting bases to suit all our retractable thrusters are available to facilitate installion. Manufactured from isophtalic GRP, they can be easily integrated into new builds or retro-fitted.
Aluminium yachts are catered for with suitable aluminium flanges. These
are designed to be welded to the top of a mounting base constructed in the
hull.
Description
Suitable for
Order Number
Compact Retract
311362
VIP 150
35025
Compact Retract
313760
VIP 150
35026
Aluminum flange
GRP mounting base
Stern Adapters
Also manufactured from fully isophtalic resin, Max Power’s stern adaptors are Sheet moulding compound moulded in a male / female steel
mould.
Stern
Adapter
CT35/45 125mm
CT60/80/100/1 CT165/225 25 - 185mm
250mm
CT325 315mm
315389
315392
35015
315395
Cowls
Cowls are easily fitted to the stern adaptors and allow the use of stern
thrusters in relatively shallow draft applications.
CT35/45 125mm
Cowls 315398
63
CT60/80/100/125 185mm
CT165/225 - 250mm
315399
315400
Control Panels
All control panels are specially designed for use with Max Power’s
complete range of tunnel and retractable thrusters.
Features :
Ÿ Childproof activation
Ÿ Automatic shutdown after 30 minutes of inactivity
Ÿ Visible and audible motor overheat warning
Ÿ Motor overheat shutdown after prior warning (10 seconds)
Ÿ Standard automatic battery isolator control
Ÿ Time delay switch between port and starboard thrust
Ÿ Software protection against short circuits
Ÿ Easy to fit and water resistant
Control panels
Touch panel
Single Joystick
Double Joystick
Joystick for VIP & Compact
Boat Control panel
Grey
318201
318203
318205
318224
Black
318200
318202
318204
318206
318234
Radio Remote Control
Max Power’s radio remote control is designed to work with our entire
range of tunnel and retractable thrusters. The remote control can also be
used to operate other onboard equipment such as windlasses, passerelles,
cranes, etc.
Ÿ Supports up to 8 independently controlled channels
Ÿ Each receiver can switch 4 channels (12/24V - 5A)
Ÿ Digital recongnition avoids accidental activation of other systems
Ÿ Transmitter power supply : 2 lithium batteries 3V (CR2430)
Ÿ Receiver power supply : 12/24V
Ÿ Zero power consumption when in standby mode
Ÿ Easy to install and set up, simple to use.
Description
Order Number
Frequency
Transmitter + Receiver
312973
868 MHz
Receiver
312971
868 MHz
Transmitter
312969
868 MHz
Fuses
Max Power offers a range of calibrated fuses specifically selected and tested to offer an increased level of protection over standard ANL fuses. Chosen for their specific blow curve, Max Power fuses match the requirements
of each thruster system.
Thruster
Model
CT35/45
CT60
CT80/
Compact
Retract
CT60/80/
Compact
Retract
CT100/
VIP150
CT125/
VIP150
CT165/ 225
CT300/ 325
Voltage
12
12
12
24
12
24
24
24
Amp
125
160
200
125
315
200
250
400
Fuse
35021
35019
35020
35021
35022
35020
35027
35028
Fuse Holder 35017
35017
35017
35017
35018
35017
35018
35018
Extraction
Handle
312882 (for all models)
64
Spare Parts
Size
Order Number
Props
125mm
35030
185mm
35031
250mm
35032
300mm
35033
Prop Pins
125mm
312058
185mm
312053
250mm
312059
Mono Composite Drive Leg
125mm
315318
185mm
35034
Duo Composite Drive Leg
125mm
310376
185mm
35035
250mm
315321
Motor Relay Assembly
CT35/45 - 12 volt
315325
CT60/80 - 12 volt
315326
CT60/80 - 24 volt
315327
CT100/ VIP150 - 12 volt
315328
CT125/ VIP150 - 24 volt
315329
CT165/225 - 24 volt
315331
CT300/315
315334
Battery Cut off Switch
65
12 volt
318400
24 volt
318401
Electronic Thruster
Control
315308
Heat Sensor
311363
Vertical Windlass
Main Features
X1
Watertight Stainless steel Ball Bearings
X2
X3
R
R
Independent Gypsy and drum operation
R
R
R
Rope and Chain combination gypsy
R
R
R
Manual chain release
R
R
R
R
R
Manual override
X3.5
X4
X5
R
R
R
R
R
R
R
R
Project
1000
Project
1500
Project
2000
Ercole
Verticale
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Chain counter pre-setting as standard
R
R
R
R
R
R
R
R
R
R
Motor IP-rating (12/24V)
66
66
66
44
44
44
66
66
44
44
R
R
R
R
R
R
Motor with two-speed built-in solenoids
Anodised marine aluminium gearbox
Equipment included
R
R
R
R
R
Handle, control box
R
Handle
R
Handle,
control box
on 24volt
66
X0 Windlass
Motor size
500 watt
Power
12 volt
Consumption
60 amps
Max. Pull
630kg
Lift working load
95kg
Max. Lift load
345kg
Hauling speed
23 to 26m per min
Weight
9kg
Order number
6mm gypsy #411253
X1 Windlass
Construction
Motor size
Chromed Bronze
500 watt
700 watt
Power
Low Profile
With Capstan
60 amps
110 amps
120 amps
60 amps
Max. Pull
630kg
700kg
900kg
630kg
Lift working
load
95kg
100kg
125kg
95kg
Max. Lift load 345kg
380kg
425kg
345kg
to 26m
Hauling speed 23
per min
25 to 28m
per min
14kg
20 to 30m
per min
17kg
23 to 26m
per min
11kg
12kg
Gypsy Size
Rope Size
Chromed
Bronze 500watt
6mm
10-12mm,
3-strand
12mm, 3-strand
10-12mm,
3-strand
12mm, 3-strand
472880
473217
187269
473002
472881
473207
187270
473003
6mm
8mm
67
12 volt
Order Number
Chromed
Chromed
Bronze Bronze 700watt
1000watt
8mm
500 watt
Consumption
Weight
X1
Aluminium
1000 watt
Aluminium 500watt
409557
600093
409558
600092
X2 Windlass
Construction
Motor size
Power
Consumption
Max. Pull
Lift working
load
Max. Lift
load
Hauling
speed
Weight
X2
Gypsy
Size
6mm
8mm
Low
Profile
With
Capstan
10mm
10mm
ISO4565
6mm
8mm
10mm
10mm
ISO4565
Rope Size
14mm, 3strand
316
S/Steel
187283
316
S/steel
1000w
Chromed Bronze
150kg
700w
12 volt
110a
850kg
115kg
500kg
460kg
117a
1000kg
1000w
Aluminium
117a
1000kg
150kg
1000w
24 volt
59a
1060kg
160kg
500kg
25 to 45m
25 to 45m 30 to
per min 35m per per min
min
24kg
23kg
24kg
700w
110a
850kg
115kg
1000w
12 volt
117a
1000kg
150kg
130a
1200kg
165kg
1500w
24 volt
65a
1270kg
175kg
530kg
460kg
500kg
600kg
635kg
25 to
45m per
min
24kg
19 to
25m per
min
19kg
17 to
23m per
min
20kg
16 to
28m per
min
23kg
16 to
28m per
min
24kg
Order Number
Chromed Chromed Chromed Alumini
Bronze - Bronze - Bronze - um 500watt
1000watt 1000watt 700watt
(24V)
600047
600045
472861
473213
600054
472558
Alumini
um 1000watt
1500w
Alumini
um 1500watt
Alumini
um 1500watt
(24v)
600049
472751
600057
600061
600053
600056
600060
600050
472557
602097
57450
472864
14mm, 3strand
187284
600046
472862
473212
473255
600044
472735
602096
472863
68
X3 Windlass
Construction
Motor size
Chromed Bronze
Power
Low Profile
With Capstan
Rope Size
8mm
10mm
10mm ISO 4565
12mm
8mm
10mm
10mm ISO 4565
12mm
14mm, 3-strand
16mm, 3-strand
16mm, 3-strand
18mm, 3-strand
14mm, 3-strand
16mm, 3-strand
16mm, 3-strand
18mm, 3-strand
24 volt
130 amps
135 amps
68 amps
1200kg
1600kg
1695kg
Lift working load 165kg
200kg
215kg
Max. Lift load
600kg
800kg
850kg
Hauling speed
15 to 35m per
min
15 to 32m per
min
15 to 32m per
min
Weight
35kg
38kg
38kg
Max. Pull
Gypsy Size
1700 watt
12 volt
Consumption
X3
1700 watt
1500 watt
Order Number
Chromed Bronze - Chromed Bronze 1500watt
1700watt
600065
602102
472866
473209
472842
600064
602101
472865
473208
473004
Chromed Bronze 1700watt (24v)
602104
473256
473006
600068
602103
473252
473005
X3.5 Windlass
Construction
Motor size
Power
Consumption
Max. Pull
Lift working
load
Max. Lift load
Chromed Bronze
1700 watt
2300 watt
2300 watt
2700 watt
12 volt
24 volt
135 amps
68 amps
110 amps
125 amps
1700kg
1750kg
2000kg
2400kg
220kg
265kg
320kg
215kg
850kg
15 to 32m
Hauling speed per min
Weight
50kg
X3.5
With Capstan
69
Gypsy Size
10mm
12mm
14mm
Chromed Bronze 1700watt
600084
600086
875kg
15 to 32m
per min
50kg
1000kg
18 to 30m
per min
60kg
Order Number
Chromed Bronze - Chromed Bronze 1700watt (24v)
2300watt (24v)
600085
600087
600088
1200kg
18 to 32m
per min
60kg
Chromed Bronze 2700watt (24v)
600090
Project 1000
Construction
Chromed Bronze
Motor size
1000 watt
Power
Consumption
130 amps
Max. Pull
1000kg
Lift working load
150kg
Max. Lift load
500kg
Hauling speed
25kg
Weight
Project 1000
Low profile
With Capstan
25 to 50m per min
Order Number
Chromed Bronze - 1000watt
Gypsy Size
Rope Size
8mm
10mm
8mm
10mm
14mm, 3-strand
220153
471022
220159
428419
14mm, 3-strand
Project 1500
Construction
Motor size
Power
Consumption
Max. Pull
Lift working load
Max. Lift load
Hauling speed
Project 1500
Low profile
With Capstan
Gypsy Size
Rope Size
10mm
12mm
10mm
12mm
16mm
18mm
Chromed Bronze
1500 watt
1500 watt
12 volt
24 volt
135 amps
68 amps
1600kg
1695kg
200kg
215kg
800kg
850kg
48m per min
48m per min
Order Number
Chromed Bronze Chromed Bronze 1500 watt
1500watt (24v)
602095
602090
474003
187315
602094
602091
600588
187316
70
Project 2000
Construction
Chromed Bronze
Motor size
2000 watt
24 volt
Power
Consumption
190 amps
Max. Pull
2000kg
Lift working load
545kg
Max. Lift load
1000kg
Hauling speed
Weight
12 to 27m per min
86kg
Project 2000
Gypsy Size
Order Number
Chromed Bronze - 2000watt (24v)
Low Profile
With Capstan
12mm ISO 4565
12mm ISO 4565
472748
472749
X4 Windlass
Construction
Motor size
Chromed Bronze
2300 watt
24 volt
Power
Consumption
190 amps
200 amps
Max. Pull
2000kg
2400kg
Lift working load
545kg
650kg
Max. Lift load
1000kg
1200kg
Hauling speed
Weight
X4
Gypsy Size
Model
With Capstan
10mm ISO 4565
12mm ISO 4565
12mm ISO 4565
14mm ISO 4565
12mm ISO 4565
14mm ISO 4565
Port
Port
Starboard
Starboard
71
2700 watt
12 to 27m per min 15 to 29m per min
82kg
85kg
Order Number
Chromed Bronze Chromed Bronze 2300watt (24v)
2700watt (24v)
600073
473007
601170
602366
600075
472849
X5 Windlass
Construction
Chromed Bronze
Motor size
3000 watt
24 volt
Power
Consumption
250 amps
Max. Pull
2800kg
Lift working load
760kg
Max. Lift load
1400kg
12 to 30m per min
Hauling speed
100kg
Weight
X5
Gypsy Size
Order Number
Chromed Bronze - 3000watt (24v)
With Capstan
12mm ISO 4565
14mm ISO 4565
600089
600091
Ercole Vertical Windlass
Construction
316 Stainless Steel
Motor size
3500 watt
4000 watt
Power
24 volt
400 volts
Consumption
120 amps
-
Max. Pull
4500kg
4500kg
Lift working load
1075kg
1310kg
Max. Lift load
2250kg
2750kg
8 to 15m per min
12m per min
180kg
185kg
Hauling speed
Weight
Ercole
Vertical
Gypsy
Size
With
Capstan
14mm ISO Starboard
4565
14mm ISO Port
4565
Model
Order Number
316 Stainless 316 Stainless
Steel Steel 3500watt
4000watt
(24v)
(400v)
600080
600082
600081
600083
72
Horizontal Windlass
Main Features
Altas Dorado Royal Kobra Cayman Tigres Falkon Titan Ercole Super
Ercole
Independent Gypsy and drum operation
Rope and Chain combination gypsy
R
R
Manual chain release
R
R
Manual override
Chain counter pre-setting as standard
R
66
Equipment included
73
66
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
66
66
66
66
44
44
44
Handle, control box
Altas windlass
Construction
Anodised
Aluminium
600 watt
Motor size
12 volt
Power
Consumption
60 amps
Max. Pull
700kg
Lift working load
100kg
Max. Lift load
380kg
Hauling speed
11kg
Weight
Atlas
Gypsy Size
Low Profile
6mm ISO 4565
12mm ISO 4565
12mm ISO 4565
23 to 26m per min
Order Number
Anodised Aluminium - 600watt
600023
600024
600025
Dorado Windlass
Construction
Motor size
Anodised Alminium
500 watt
700 watt
24 volt
Power
Consumption
60 amps
110 amps
Max. Pull
630kg
900kg
Lift working load
95kg
125kg
Max. Lift load
345kg
490kg
Hauling speed
Weight
Dorado
Gypsy Size
Rope Size
Low profile
6mm ISO 4565
8mm ISO 4565
10-12mm, 3-strand
12mm, 3-strand
10kg
11kg
Order Number
Anodised Aluminium - Anodised Aluminium 500watt
700watt
409568
600048
409569
74
Royal windlass (Manual)
Construction
Anodised
Aluminium
-
Motor size
-
Power
Consumption
Max. Pull
400kg
Lift working load
50kg
Max. Lift load
200kg
Hauling speed
10kg
Weight
Royal
Gypsy Size
With Capstan
6mm ISO 4565
8mm ISO 4565
10mm DIN 766
-
Order Number
Anodised Aluminium - Manual
187323
404725
600079
Kobra Windlass
Construction
Anodised Alminium
1000 watt
Motor size
12 volt
Power
Consumption
117 amps
59 amps
Max. Pull
1250kg
1325kg
Lift working load
160kg
170kg
Max. Lift load
625kg
665kg
Hauling speed
Weight
Kobra
Gypsy Size
With Capstan
6mm ISO 4565
8mm ISO 4565
10mm
75
24 volt
21kg
21kg
Order Number
Anodised Aluminium Anodised Aluminium 1000watt
1000watt (24v)
600051
220260
428747
220420
Cayman windlass
Construction
Anodised Alminium
700 watt
Motor size
12 volt
Power
Consumption
110 amps
117 amps
Max. Pull
1050kg
1300kg
Lift working load
135kg
165kg
Max. Lift load
525kg
650kg
Hauling speed
24kg
Weight
Cayman
Gypsy Size
With Capstan
6mm ISO 4565
8mm ISO 4565
10mm ISO 4565
1000 watt
25kg
Order Number
Anodised Aluminium - 700watt Anodised Aluminium 1000watt
600043
220273
220279
419732
Tigres windlass
Construction
Anodised Alminium
1500 watt
Motor size
12 volt
Power
Consumption
130 amps
65 amps
Max. Pull
1500kg
1590kg
Lift working load
190kg
200kg
Max. Lift load
750kg
795kg
Hauling speed
Weight
Tigres
Gypsy Size
With Capstan
8mm ISO 4565
10mm ISO 4565
24 volt
28kg
28kg
Order Number
Anodised Aluminium Anodised Aluminium 1500watt
1500watt (24v)
418407
418409
470060
220290
76
Falkon windlass
Construction
Anodised Aluminium
1700 watt
Motor size
12 volt
Power
Falkon
Gypsy Size
With Capstan
10mm ISO 4565
12mm ISO 4565
24 volt
Consumption
135 amps
68 amps
Max. Pull
1700kg
1800kg
Lift working load
215kg
225kg
Max. Lift load
850kg
900kg
Hauling speed
Weight
55kg
55kg
Order Number
Anodised Aluminium - 1700
Anodised Aluminium - 1700
watt
watt (24v)
220293
418511
404732
404733
Titan Windlass
Construction
Motor size
24 volt
Power
Consumption
140 amps
Max. Pull
2700kg
Lift working load
430kg
Max. Lift load
1500kg
Hauling speed
Gypsy Size
Model A
12mm ISO 4565
14mm ISO 4565
Model B
12mm ISO 4565
14mm ISO 4565
With Capstan
77
10 to 16m per min
115kg
Weight
Titan
Anodised
Alminium
2300 watt
Order Number
(24v)
404724
600072
428938
426415
Ercole windlass
Construction
Motor size
Anodised
Aluminium
3500 watt
24 volt
Power
Ercole
With Capstan
Model A
Model B
Model C
Consumption
120 amps
Max. Pull
4500kg
Lift working load
810kg
Max. Lift load
2500kg
Hauling speed
8 to 15m per min
Weight
200kg
Gypsy Size
Order Number
(24v)
14mm ISO 4565
14mm ISO 4565
14mm ISO 4565
403615
220317
403614
Super Ercole Windlass
Construction
Motor size
24 volt
Power
Consumption
190 amps
Max. Pull
5000kg
Lift working load
870kg
Max. Lift load
2780kg
Hauling speed
With Capstan
Gypsy Size
Model A
Model B
16mm ISO 4565
16mm ISO 4565
8 to 15m per min
235kg
Weight
Super Ercole
Anodised
Alminium
3500 watt
Order Number
(24v)
404957
426414
78
Capstans
Main Features
T500
T700
T1000
T1500
T1700
T2000
T2500
T3500
Anodised Marine Aluminium Gearbox
R
R
R
R
R
R
R
R
66
66
66
66
66
44
44
44
Equipment included
79
Control box
T500
Model
Motor
Size
T500
500 W
T700
T1000
T1500
T1700
700 W
Order
Number
Power
Description
Consumption
Max. Pull
Lift
working
load
Max. Lift
load
Hauling speed
Weight
409130
12 V
Chromed
Bronze
60 A
670 kg
85kg
335 kg
20 to 25 m per min
11 kg
409563
12 V
Anodised
Aluminium
60 A
670 kg
85kg
335kg
23 to 26 m per min
9 kg
220006
12 V
Chromed
Bronze
110 A
850 kg
115 kg
460 kg
25 to 30 m per min
15 kg
411129
12 V
Anodised
Aluminium
88 A
850 kg
115 kg
460 kg
19 to 25 m per min
15 kg
418159
24 V
Chromed
Bronze
55 A
900 kg
125 kg
490 kg
25 to 30 m per min
15 kg
417946
12 V
Chromed
Bronze
117 A
1000 kg
150 kg
500 kg
25 to 35 m per min
21 kg
409564
12 V
Anodised
Aluminium
108 A
1000 kg
150 kg
500 kg
17 to 23 m per min
16 kg
187324
24 V
Chromed
Bronze
59 A
1060 kg
160 kg
530 kg
25 to 35 m per min
21 kg
409567
24 V
Anodised
Aluminium
54 A
1060 kg
160 kg
530 kg
17 to 23 m per min
16 kg
220014
12 V
Chromed
Bronze
130 A
1200 kg
165 kg
600 kg
20 to 35 m per min
35 kg
600058
12 V
Anodised
Aluminium
115 A
1200 kg
165 kg
600 kg
16 to 28 m per min
18 kg
418161
24 V
Chromed
Bronze
65 A
1270 kg
175 kg
635 kg
20 to 35 m per min
35 kg
600062
24V
Anodised
Aluminium
58 A
1270 kg
175 kg
635 kg
16 to 28 m per min
18 kg
600066
12 V
Anodised
Aluminium
140A
1600 kg
200 kg
800 kg
15 to 30 m per min
25 kg
187326
24 V
Chromed
Bronze
68 A
1695 kg
215 kg
850 kg
16 to 32 m per min
30 kg
600069
24 V
Anodised
Aluminium
70 A
1695 kg
215 kg
850 kg
15 to 30 m per min
25kg
1000 W
1500 W
1700 W
T700 & T1000
T1500
T1700
80
T3500
T2500
T2000
Model
Motor
Size
Order
Number
Power
Construction
Consumption
Max. Pull.
Lift
working
load
Max. Lift
load
Hauling speed
Weight
2300 W
404967
24 V
Chromed
Bronze
190 A
2000 kg
545 kg
1000 kg
12 to 27 m per min
52 kg
2200 W
600071
400 V
Chromed
Bronze
-
2200 kg
595 kg
1100 kg
16 m per min
55 kg
2700 W
476239
24 V
Chromed
Bronze
190 A
2400 kg
650 kg
1200 kg
12 to 27 m per min
53 kg
2200 W
600070
400 V
Chromed
Bronze
-
2200 kg
595 kg
1100 kg
16 m per min
55 kg
200 A
4500 kg
1075 kg
2250 kg
8 to 15 m per min
120 kg
-
6000 kg
1430 kg
3000 kg
12 m per min
140 kg
T2000
T2500
3500 W
600077
24 V
316 L Stainless
Steel
5000 W
423284
400 V
316 L Stainless
Steel
T3500
T2000
T3500
T2500
81
Windlass Accessories
Iris Bulkhead Chain Counter
This bulkhead chain counter is easy to fit and suitable for all types of cockpits. The different functions allow a full control of the anchoring manoeuvre. Complies with IP 67 standards (dust and water proof).
Ÿ Power supply : 10-30V dc
Ÿ High vision LCD display
Ÿ Multilingual menu (EN, FR, DE, ES, IT)
Ÿ Reverse polarity protection
Ÿ On/ off switch
Ÿ Automatic anchor dropping function
Ÿ Up alarm
Ÿ Display of consumption, power supply, chain speed and mooring
lengths in meters or feet.
Ÿ Sensor detection function
Ÿ Possibility of parallel connection.
Order number - 600017
Galaxy Chain Counter
Galaxy chain counters provide absolute comfort on board during anchoring manoeuvres as you are in full control of the situation at the touch of a
button. Complies with IP 67 standards (dust and water proof).
Ÿ Power supply : 10-30V dc
Ÿ High vision LCD display
Ÿ Multilingual menu (EN, FR, DE, ES, IT)
Ÿ Reverse polarity protection
Ÿ Automatic anchor lower function
Ÿ Anchor retrieving alarm
Ÿ Display of consumption, power supply, chain speed and mooring
lengths in meters or feet.
Ÿ Sensor detection function
Ÿ Possibility of parallel connection.
Order number
Model
600015
Galaxy 505
600016
Galaxy 703
Description
Remote hand switch.
With 4 mtr coiled wire
Radio remote control
Galaxy Remote Controls
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Water proof housing
Power supply : 10-30V dc
Reverse Polarity Protection
Possibility of parallel connection
On/ off Switch (Galaxy 303)
Automatic anchor dropping function (Galaxy 303)
Galaxy Remote Controls comply with IP 67 standards (dust and water
proof)
Order number
Model
Description
600013
Galaxy 102
Remote hand switch.
With 4 mtr coiled wire
600014
Galaxy 303
Radio remote control.
Fully operational up to 20-30m distance.
Frequency 433.92 MHz
82
Foot Switch
Easy to install
Stainless steel base and composite cover. The rubber coated switch is resistant to UV rays and sea water. Foot switch complies with IP 67 standards ( dust and water proof)
Order number
600011
600012
Model
Down
Up
Description
Red Rubber
Black Rubber
Control Switch
Order number
404728
187338
Description
Control switch for cockpit, type L. 3-positions :
Up-off-Down
Rocker control switch, Type C
Circuit Breaker
The circuit breaker is an essential component of the electric plant:
Ÿ Protects from dangerous short circuits
Ÿ Protects the electric motor of the windlass
Ÿ Cuts tension to the windlass when desired
35 Amps
Thermal
40 Amps
187331
Hydraulic
600029
70 Amps
100 Amps 125 Amps
187332
187333
600009
600028
187334
Solenoids
Resistant to chocks and marine corrosion.
Description
83
No. of
terminals Power Motor Size
600030 Single remote control switch 2
12v
700-1500w
24v
700-1500w
24v
2500w
419245 Inverter up/down 360 amps
2
24v
3500-5000w
600018 Control box
3
12v
500-1700w
600019 Control box
3
24v
500-1700w
600020 Control box
3
24v
2300w
600041 Control box
4
12v
600w
600021 Control box
4
12v
500-1700w
600022 Control box
4
24v
500-1700w
Gypsies
Spare parts for Windlasses
Windlass Model
Kobra - Cayman - Tigres
X0 - X1 - X1 alu
Dorado
X2 - X2 alu - Project 1000
Kobra - Cayman - Royal
X1 - X1 alu
X1 - X1 alu
Dorado
Kobra - Cayman - Tigres - Royal
Kobra - Cay man - Tigres
Falkon - Titan - Project 2000 - X4 - X3.5
Ercole - Ercole Vertical - Super Ercole - X5
Ercole - Ercole Vertical - Super Ercole - X5
Ercole - Ercole Vertical - Super Ercole
Gypsy Chain
5/6 HT
6 mm
6 mm
6 mm
6 mm
7 mm
8 mm
8 mm
8 mm
8 mm
8 mm
10 mm
10 mm
10 mm
10 mm, DIN766
10 mm, DIN766
10 mm, DIN766
10 mm, DIN766
10 3/8 HT mm
10 mm 3/8 HT
12 mm
12-13 mm, DIN766
12-13 mm, DIN766
14 mm
14 mm
16 mm
16 mm
Order Number
631077
630970
630974
630953
630966
630980
630999
631003
630949
630994
630957
630951
631028
630959
630955
630966
631118
631132
631011
631022
630961
631031
631039
631065
631059
631082
631088
Part No
276D
206B
206A
916A
276A
206C
206D
206E
916B
276C
989A
916C
522C
989B
916D
989C
276F
367C
276E
367B
989D
367D
574B
574D
367G
574E
574F
Motors
Voltage
Motor Size
500 W
700 W
1000 W
1500 W
1700 W
2000 W
2200 W
2300 W
2700 W
3500 W
4000 W
Windlass Model
X0 - X1 - X1 alu - Dorado - T500
X1 - Dorado
X2
X2 alu - T700
Cayman
Kobra - X2 alu - T1000 - X1
Project 1000
X2
X2 alu - T700 - T1000
Project 1500
Tigres - T1500 - X3
Falkon - T1700 - X3 - X3.5
Project 2000
Titan - X4
Titan - X4 - X3.5
Titan - X4 - X3.5
12 V
Order Number
633509
634390
634386
633510
634367
633512
634375
634373
634380
634369
634371
24 V
400 V
Part No Order Number Part No Order Number Part No
233E
233D
951D
960A
633511
960B
353C
634368
353D
961A
930A
634378
930B
951A
634374
951B
633513
961B
1009A 634382
1009B
418E
634370
418F
418G
634372
418H
634384
1010
633478
680
633502
419
633503
433
633505
640
633483
641F
84
Kit A - Gaskets
Kit B - Screws
Kit C - Pins
Order
Number
Windlass Model
Order
Windlass Model
Number
Order
Number
Windlass Model
418422
T1500-T1700
418448
T700-T1000
418486
T700 - T1000
418411
T700-T1000
474025
X2 alu
418488
T2000 - T2500
418399
T2000-T2500
418480
Dorado
Ercole
Dorado
X2 alu
418472
418503
474024
Ercole Vertical - T3500
Ercole
Dorado
418475
418494
418433
418456
Falkon
418499
418423
Ercole
418452
Kobra - Cayman
418428
418492
Falkon
418450
T1500 - T1700
418402
Falkon
418478
X0
418489
Kobra - Cayman
418400
Kobra - Cayman
474021
Project 1000 - X2
418487
Project 1500 - X3 - T1500 T1700
474022
Project 1000 - X2
474016
Project 1500 - X3 - X3 alu
474020
Project 1000 - X2
474015
Project 1500 - X3 - X3 alu
474012
Project 2000 - X4
X1
Project 2000 - X4
Project 2000 - X4
474029
474011
474013
Royal
Royal
X1
418444
418482
474028
418446
X0 - T500
418483
X0 - T500
418410
X0 - T500
418476
Super Ercole
427806
Super Ercole
418500
Super Ercole
418453
Tigres
418401
Tigres
418457
Titan
418490
Tigres
418403
Titan
418451
T2000 - T2500
418493
Titan
Kit D - Circlip
Order Number
418515
418579
418555
418556
635219
418528
418514
418513
474018
474010
635224
418512
418575
418553
85
Windlass Model
T2000 - T2500
Dorado
Ercole
Ercole Vertical T3500
Falkon
Kobra - Cayman
- Tigres
Project 1500 - X3
- T1500 - T1700
T700 - T1000
Project 1000 - X2
Project 2000 - X4
Royal
X0 - T500
Super Ercole
Titan
Kit F - Finger
Handles
Order Number
Windlass Model
474023
Project 1000 - X2
272
474017
Project 1500 - X3
733
466
842A
884
836
352
566
35026
Dorado
Windlass Model
Order
Number
Part No.
Project 1000 - Project
1500 - X2 - X3
Ercole
Falkon
X1
Project 2000 - X4
Royal
Tigres
Ercole Vertical
633302
633318
633317
633303
633316
633315
633314
633319
Motor Brush Kit
Order Number Motor Size
634781
500W 12V - 700W 12/24V
427922
1000W 12V
634780
1000W 24V - 1200W 24V
478222
1200W 12V
428947
1500W - 1700W 12V
634782
1500W - 1700W 24V
408978
2300W 24V
416795
2500W 24V
634785
3500W 24V
Kit F - Finger
Order Number
Windlass Model
474053
X1 - X2 - X3
600033
X4
601291
Ercole Vertical
Electric Macerator Toilet
Handy, light and compact, the Sani Marin 31 is the smallest toilet on the market.
Thanks to its light weight and small size, it is easy to integrate in all areas, and above
all, it easily replaces toilets with manual pumps.
Your 10 Benefits
1. Automatic - Push button flushing control
2. Sturdy - Patented maceration system
3. Handy - Replaces toilets with hand pump systems
4. Saves Water - uses just 1.2 litres each it is flushed
5. Saves Electricity - 1.73 A/H per cycle in economical mode
6. Quiet - The quietest of marine toilets
7. EASY to install and maintain
8. Ideal for Handling Black water - Makes it easier to bring installions into line
with standards
9. Marine Design - Suits all craft configurations from 20 to 60 foot
10. 2-year Guarantee
Control Panels
A new single Control Console that is even more efficient and smarter to look at,
while remaining just as easy to use! Among its main features:Ÿ A “Tank Full” indicator light showing that the black water tank is full
(optional connection to your blank water tank gauge)
Ÿ An economical flushing cycle that uses just 1.2 litres of water
Ÿ A normal flushing cycle that uses 2.2 litres of water, adjustable up to 3 litres
Ÿ Empty : key pressed to empty the bowl completely in rough seas
Ÿ Choice of colours : Black or White
Order number - SM - 3 Button
Comes Standard
with any Toilet
purchase
Two- position electric switch : rinsing / maceration
and pumping, with the duration of each cycle controlled
by the user.
Order number - SM-Rocker
Ideal for boats with multiple users, the Pneumatic push button triggers
an automatic flushing cycle.
Order number - SM-pushbutton
86
Exclusive Medium
- The Exclusive system ensures full flushing of the bowl during all manoeuvres, whatever the vavigation conditions or the craft’s position. You
can expect enhanced cleanness and efficiency thanks to its optimized pressure level
- The new Exclusive range features the soft close system that brakes the
seat and cover as they go down. No more incidents; full comfort is ensured.
- Reduced water and electricity consumption
- Sani Marin products are the quietest marine toilets.
- Featuring international after-sales service.
- Weight is 26kg
Electric Toilet with Maceration system
2 YEAR WARRANTY
Available voltage - 12 or 24 volt
Order number - Excl/Med-12v
Excl/Med-24v
Exclusive Short
- The Exclusive system ensures full flushing of the bowl during all manoeuvres, whatever the vavigation conditions or the craft’s position. You
can expect enhanced cleanness and efficiency thanks to its optimized pressure level
- The new Exclusive range features the soft close system that brakes the
seat and cover as they go down. No more incidents; full comfort is ensured.
- New clean lines for the standard size model
- Sani Marin products are the quietest marine toilets
- Featuring international after-sales service.
- Weight is 21kg
2 YEAR WARRANTY
Order number - Excl/Sho-12v
Excl/Sho-24v
31 Toilet
- Ideal for handling black water
- Product covered by a 2-year guarantee featuring international after-sales
service.
- Weight is 17kg
2 YEAR WARRANTY
Order number - SN31-12v
SN31-24v
87
Elite Toilet
- Biggest Toilet in our Range
- Ideal for handling black water
- Product covered by a 2-year guarantee featuring international after-sales
service.
- Weight is 28kg
2 YEAR WARRANTY
Order number - SNElite-12v
SNElite-24v
San Marin Sea Pump
To provide pumped salt or fresh water for your toilet or sanitary fittings
directly from outside the boat.
Order number - SNseapump-12v
SNseapump-24v
San Marin Pump
Gray water pump. Required to install a shower or a sink, Sanimarin Pump
ensures the recovery of waste water on board. From a very small footprint,
it can be installed under the floor. The design also reduces the number of
hull valves. Avery compact unit which can be fitted below floorboards.
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Vertical pumping height up to : 4m
Outlet Diameter : 22 to 32mm
Max waste water temperature : 35 degrees
Motor power rating : 360 watts
Removable exterior check valve
Order number - SNpump-12v
SNpump-24v
88
Vacuum Toilet
Popular Toilet
- The worlds most reliable sea toilet since 1963
- Vacuum flushing
- No moving parts
- Well-proven marine toilet will give continuous trouble free service
- Can be installed above or below the waterline
- Suitable for holding tanks applications due to it minimal use of flushing
water
Vacuum Toilet with Manual Hand Pump
Order number - TLZ0801 - Popular toilet with Top Action Pump
- TLZ0802 - Popular toilet with Under Deck Pump
- TLZ0809 - Popular toilet with No Pump
Popular Toilet Spare Parts
Zenith Toilet Spare Parts
Lid Seal
TLZ8066
Lid
TLZ 9075
Seat Seal
TLZ8065
Seat
TLZ9070
Lid and Seat Seal
TLZ8067K
Lid Seal
TLZ9065
New Popular Kit - Lid, seat,
hinge and seals
Pan Base Seal
TLZ8068
Seat Seal
TLZ9065
TLZ9010
Hand Pump Kit
TLZ0951
Sea Cock
¾ inch Blakes Sea Cock
Order number - SCXP110C
Sea Cock
1 ½ inch Blakes Sea Cock
Order number - SCXP210C
89
Watermakers
PowerSurvivor 40E
The world’s smallest electrical desalinator
Ÿ Compact desalinator which can be operated both electric and
manually
Ÿ Extremely energy efficient – no watermaker draws so few amps
TECHNOLOGY: Reverse Osmosis
SALT REJECTION: 98.4% on average (96%)
FLOW: 5.7 litres/ hour
POWER REQUIREMENTS: 12 volts DC / 4 amps
WEIGHT: approx. 11.33kg
DIMENSIONS: 17.1 x 41.9 x 39.3 cm
3 YEAR WARRANTY
Order Number - K8013438 (12 volt)
- K8013439 (24 volt)
PowerSurvivor 80E
One of the most efficient electric desalinators
Ÿ Extraordinarily compact, especially with respect to it’s output
Ÿ Covers the entire daily water requirement of 4 people
POWER REQUIREMENTS: 12 volts DC / 8 amps
3 YEAR WARRANTY
Order Number - K8013441 (12 volt)
- K8013442 (24 volt)
PowerSurvivor Servicing
Here at Southern Seas Marine, we offer a full overhaul/ service of
any Katadyn PowerSurvivor or Manual Survivor.
How it works
Ÿ Send the unit to our Factory (address located at the bottom
of the Table of contents)
Ÿ Once unit has arrived, it will be tested and a report will be
written up
Ÿ Team member will ring the customer and give them the
report
Ÿ Customer may choose to continue with the Overhaul/
Service or simply have the unit sent back.
Ÿ Please give us a call for updated prices
90
Survivor 06
The world’s smallest desalinator
Ÿ Hand-operated desalinator which is extraordinary
compact in size
Ÿ Recommend for emergency liferafts and individual
survival kits
AVERAGE PUMP RATE: 40 strokes/ minute
Survivor 35
The most powerful desalinator for emergencies
Ÿ Hand-operated desalinator widely used by
international military forces, sea kayakers and
adventurers
Ÿ Survival tool and extra source of fresh water without
need of auxiliary power
AVERAGE PUMP RATE: 30 Strokes/ minute
Spare
Parts
Description
35 Seal Repair Kit
40E Seal Repair Kit
80E Seal Repair Kit
160E Seal Repair Kit
Piston Repair Kit 40E, 80E, 160E
Extended Cruise kit for 40E, 80E,
160E
Preventative Maintenance kit for
40E, 80E, 160E
Biocide 240g / 100g
Acid Cleaner 240g / 100g
Alkaline Cleaner 240g / 100g
Order Number
K8013053
K8012610
K8012889
K8012520
K8013877
Please Call Us
Please Call Us
K8013609 / K8013327
K8013608 / K8013617
K8013615 / k8013616
More spare parts available, please call us.
91
Water Purification
Micropur Classic
Micropur prevents the growth of germs and the development of smells in
drinking water containers and pipes. The effect of Micropur is based on
the bacteriostatic and bactericidal properties of silver. Unlike chlorine,
which is only effective for a few hours in water, silver ions will preserve
water for up to 6 months. The silver ions cling to the cell walls of
micro-organisms thus hindering their growth. Micropur can be used
wherever water remains in a system for a long time (air conditioners,
heating systems, humidifiers, wells, water tanks, water baths, incubators
etc.). Ideal for conserving water in boats, campers, caravans, and also for
treating water in hotel rooms. For clear, not for cloudy water as suspended
matter can weaken the effect of silver ions. Use a Katadyn Microfilter for
cloudy water.
Order #
52001
52301
5310
Product
MC 100P - Powder
MC10,000P – Powder
MC50,000P - Powder
Content
10g P = 100L
100g P = 10000L
500g P = 50000L
Dosage
1g/ 100L
1g/ 100L
1g/ 100L
Micropur Forte
Micropur Forte disinfects clear water quickly and safely keeping it
germ-free for up to 6 months. Due to the strong oxidizing power of
chlorine, most protozoa and fungi are eliminated as well as bacteria
and viruses. Micropur Forte can be used wherever microbiologically
unsafe water for drinking, cooking and washing needs to be
disinfected. It is also ideal for conserving water in water tanks, water
baths, air conditioning systems, heating systems, humidifiers, wells,
incubators and more. For clear, not for cloudy water as suspended
matter can weaken the effect of chlorine and silver ions.
Order #
56000
8013702
8013703
Product
MF1000F - Liquid
MF10,000 – Powder
MF50,000 - Powder
Content
100ml = 1000L
100g P = 10000L
500g P = 50000L
Dosage
1ml/ 100L
1g/ 100L
1g/ 100L
92
Marine
watermakers
with Energy
Recovery
System
Specially designed for sail and power boats where power
sources are always limited.
Ÿ High pressure hydraulic pump with Energy
Recovery System reduces power consumption to
levels of 6.5w per liter, making it possible to
operate without installing an AC generator.
Ÿ Modular configuration that takes advantage of any
available space on board.
Ÿ Automatic or Manual Versions Available
Ÿ Automatoc pressure regulation
Ÿ Very simple, reliable and easy to use systems.
Ÿ Fast and Easy installation.
Extra Remote Control
Order number
Ÿ 42210810
Integral Series
The INTEGRAL Series comprises the easiest and the smallest systems of
the whole range ECO-SISTEMS WATERMAKERS.
The INTEGRAL series includes the new S-200-PRO high pressure pump
that integrates the reverse osmosis membrane with it in a single body ,
avoiding the high pressure tubes installation. Production Rate - 30 litres
pre hour.
Order Numbers
Ÿ 412300 - Manual version - 12 or 24 volt
Ÿ 4120010 - Auto Version - 12 or 24 volt
Basic Series
BASIC MODULAR B-30 12 or 24V and BASIC MODULAR B-60 12 or
24V, offer an effective production of 30 or 60 liters per hour at remarkably
moderated energy consumption.
The BASIC models are 100% manual operated systems. They do not
include electronic devices controlling their operation, thus the appearence
of possible electronic nature problems is impossible during the navigation.
Order Numbers
Ÿ 41203 - 30 litres per hour - 12 or 24 Volts
Ÿ 41206 - 60 litres per hour - 12 or 24 Volts
93
Water-Pro / Standard Series
The STANDARD models production capacities are 30, 60 and 90 liters of
fresh water per hour for the WATER-PRO series .
The MODULAR structure makes easy the integration in boats without
space enough to locate a compact structure. The different components or
modules are supplied separately and can be distributed individually in
more reduced spaces.
Order Numbers
Ÿ 41203110 - 30 litres per hour - 12 or 24 volts
Ÿ 41206110 - 60 litres per hour - 12 volts
Water-Pro / Compact
These models are simple, reliable and easy to operate.
They work at a constant water volume and with automated high pressure
regulation. The membranes themselves act as pressure regulators.
The STANDARD models production capacities are 30, 60, y 90 liters of
fresh water per hour for the WATER-PRO series .
The COMPACT structure contains the High Pressure pump , the
membranes and the control devices in a single block thus reducing the
number of hydraulic connections to be done when installing.
Order Number
Efficient Compact Series
The EFFICIENT series uses the NEW rotating EFFICIENT pump that
produces from 200 to more than 300 liters per hour of fresh water with a
revolutionary Energy Recovering System that remarkably reduces the
power consumption.
NEW and AUTOMATED Fresh Water FLUSH system includes a “once a
week” self-programmable function.
Order Numbers
94
Automatic washing machine - Babynova
Format, design and high quality technology make the Babynova the perfect machine for modern washing in the home, or
anywhere with little space.
The format of the compact machine is just right, in more ways than one:
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
3 kg fully automatic washing machine (well filled machine = higher efficiency)
Small dimensions (fit every bathroom)
Connect to a normal socket (no extra installing)
Noise/vibration insulation (washing in the apartment)
Friendly to the environment thanks to sophisticated technology (Eco-valve, EcoMatic)
Ÿ Simple to use (one switch operation)
Main programs:
P1: Hot wash/coloureds with prewash
P2: Hot wash/coloureds without prewash
P3: Easy-care wash
P4: Delicates/curtain program
P5: Wool program
Additional programs/functions:
Ÿ Individual temperature choice
Ÿ Spinning stop
Ÿ Electronic door opening
Ÿ Separate spin program
Brand
Type
Model
Type designation
95
Consumption data for normal program 60oC
- Energy efficiency class
(A = Low, G = High consumption)
- Power consumption
- Water consumption
Using features
- Capacity
max. kg
- Washing efficiency class
(A=better, G=worse)
- Spining efficiency class
(A=better, G=worse)
At residual moisture
At spin speed
- Duration
Type of construction
- Fixed standing applicance
- Can be built in
- Door catch
Dimensions
- Height
- Width
- Depth
- Depth with door open
Weight empty
Features
- Washing programs
- Additional programs
- Security systems
- Control display
- Accessories
Power and water supply
- Electrical connection
Voltage
Wattage
Fuse
- water connection, pressure hose G ¾ connectable
Energy efficiency class
A
Washing efficiency class
A
Spinning efficiency class
D
SOBA
Automatic Washing Machine
Babynova 1000
EU355
A
0.46kWh
28 litres
3kg dry laundry
A
D
80%
1000 rpm
100 min
Yes
Yes
Left
68 cm
46 cm
46 cm
75 cm
49 kg
Freely programmable
Freely programmable
Yes
Power supply, water supply and drain hose
220-240 V
2,2 kW
10 Amps
To cold water
LPG cylinders for the 21st century
Southern Seas Marine presents a break through in LPG cylinder
design. Using
advanced technology we have created a
transparent composite cylinder with some amazing advantages
over traditional
cylinders.
Meets standard AS/2030/EN12245
Visible gas level: the transparent feature
enables the user to see the gas level through the wall of the tank,
therefore removing the risk of unexpectedly running out of gas
during use.
Propane
capacity
Butane
Capacity
Water capacity
Overall Height
Diameter
Tare weight (ex
Valve)
Lightweight and ergonomic: the unique
composite construction makes our cylinders lighter and easier to
handle. When empty, the cylinder weighs about 50% less than a
comparable metal cylinder.
Service pressure
Test pressure
5kg
7.5kg
10kg
6kg
8.5kg
12kg
12.5 litres
400mm
306mm
18.2 litres
461mm
306mm
23.8 litres
587mm
306mm
3.6kg
4.2kg
6.3kg
Pressure Ratings:
20 Bar/ 294 psi
30 Bar/ 441 psi
Non Corrosive: the composite materials do not corrode therefore Required burst pressure
the cylinder will not leave rust stains in your vehicle, boat or on Actual burst pressure
the patio.
60 Bar/ 882 psi
150 Bar/ 2200 psi
Safety: extensive testing by independent
laboratories and fire authorities have shown that the cylinder
when attacked by fire will react with a controlled burnout and will
not explode.
UV- Protection: special additives are
included in the cylinders to prevent degrading over time from
weather conditions.
At Southern Seas Marine we are proud of the award-winning design and of the unrivalled safety of our unique cylinder.
Order Number : GCC5 - 5kg, GCC75 for 7.5kg, GCC10 for 10kg
Prism Polish
Prism Polish has been formulated to clean, polish and protect
all metals in one easy application. Our protective coating is
designed to last 3 to 6 months. Prism Polish contains no harsh
acids, caustics or abrasives. it is safe to use on all metals
fiberglass, gel-coat, plexiglass and painted surfaces. Prism
Polish has been developed for use in the marine, aviation,
automotive, motorcycle and maintenance industries. Use
Prism Polish on bronze, brass, copper, stainless steel,
aluminum, pewter, nickel, sterling silver, silver plate and
factory blued guns.It offers the finest protection available for
any chrome or stainless surface. It cleans and protects in one
easy application. It restores tarnished and dull surfaces and
protects against salt corrosion and rusting. Prism Polish is
excellent to clean and deoxidize fiberglass, It removes
cloudiness from plexiglass, clear vinyl, eisenglass or lexan.
Order Number - Polish 6oz - PP06
Polish 16oz - PP16
Mirage 16oz - MSP16
96
CleanAHull Ultrasonic Antifouling
Suitable for all types of hull materials except wood.
The CleanaHull Ultrasonic Antifouling protection system utilises industry leading
technology and the latest in-house developed transducer technology. By emitting
multiple very specific frequency bursts through a vast range of frequencies the
system protects the hull from algal growth and barnacles
The Ultrasonic sound waves emitted through the hull create a environment of
microscopic cavitation bubbles. These bubbles cause a very unique environment
in the immediate vicinity of the hull when the microscopic bubbles implode,
splitting the sidewall of single cell microscopic organisms such as algae. The
cavitation has the added benefit of a scrubbing effect helping keep the hull clean.
The removal of the initial algae growth inhibits the food chain for further growth
of barnacles and other marine life that feed on the algae, effectively producing an
environment that is inhabitable by algae and barnacles.
Kits includes Ÿ 1 x CleanAHull Quad control Module
with 5m Battery Cable
Ÿ 1 x JB-Weld Bonding Epoxy Adhesive
Ÿ 1 x Loctite 515
Ÿ 1 x Installation Instructions / Manual
Booklet
Ÿ 1 x In-Line Fuse Holder
Ÿ 1 x Package of spare fuses
Ÿ 1 x Instruction manual
Double Transducer Order Number
- CAHdouble
Quad Transducer Order Number
- CAHquad
2 Person Liferaft
2 Person life raft caters for a large percentage of the marine market, the inshore and coastal
Ÿ Stowed in the smallest of spaces
Ÿ
Ÿ
Ÿ
Ÿ
The ultra light life raft makes it easier to handle and thrown (by man, women and child) in an emergency situation.
The life raft is packed in a high visibility orange valise.
It is easier to maintain with much smaller servicing costs.
The life raft gives you confidence in a man overboard situation, as it has an easy boarding platform as it is often easy to be semitrapped when boarding in an emergency.
Ÿ Thermally insulated floor, which is also reflective for search and rescue teams.
The Southern Seas Marine 2 person life raft can improve the odds of recovery with the advantage of having survival
assistance aids included
2 Person Life raft
Packed in valise
This brand new concept provides a further
safety alternative for coastal waterways.
Ÿ It weighs around 8 kilos
Ÿ Easy to handle and stow.
Ÿ The recommended service time is every 2 Years
97
Ÿ Order Number - LR-5550
4, 6, 8, 10 & 12 Person Liferaft
Self Righting ISO9650-1 Life rafts
Equipment included in liferaft Ÿ Floating Knife
Ÿ Sea Anchor
Ÿ Paddles
Ÿ Rescue Quoit
Ÿ Rain Water Bag
Optional Emergency Pack Details
Ÿ Survival Instructions
Ÿ Flashlight
Ÿ Repair Kit & Plugs
Ÿ Signal Whistle
Ÿ Sponges
Ÿ Toping up Air Pump
Ÿ Repair Valve Plugs
Order Number - LR-EP1
NOTE: Inspection/servicing of this life raft should be a
minimum of once every three (3) years, return to Southern Seas
Marine or its agent for complete and authorised service and
repair.
Model
Order number
Container
4 person
LR-SR04
765 x 525 x 330 mm 40 kg
710 x 410 mm
33 kg
6 person
LR-SR06
765 x 545 x 350 mm 45 kg
710 x 410 mm
37 kg
8 person
LR-SR08
815 x 565 x 350 mm 51 kg
760 x 430 mm
41 kg
10 person
LR-SR10
880 x 630 x 390 mm
12 person
LR-SR12
880 x 630 x 425 mm
Stainless Steel Cradles Order number
4, 6 & 8 Person
LR-Cradle468
10 & 12 Person
LR-Cradle1012
Valise
e,
vailabl
a
s
n
o
i
opt
day
Rental e us a call to
giv
6
please
02 966
5
5
7
0
98
Index
A
H
Page
Page
Air Scoop
8
Handrails
29
Antifoul - Ultrasonic
97
Hatch - Cristal
38
46 47
Hatch - Escape
38
Hatch - Flush
39
Autopilot
B
Page
B & G - Electronics
25 to 27
Hatch - Flyscreen/ Shade
40
Ball Valve - Bronze
1
Hatch - Intergration
35
Ball Valve - Nickel plated Brass
5
Hatch - Opal
37
Ball Valve 2 piece - Stainless
3
Hatch - Parts
39
Ball Valve 3 piece - Stainless
5
Hatch - Sliding
36
Bearing - Jefa
48, 49
Hatch - Tradition
36
Blocks
18, 19
Hatch - Trim Ring
40
Bollards
9
Hatch - Two Way
36
Boombrake
56
Hatch - Vents
44
Bottle - Gas
96
Hawse Pipe - Chrome plated
5
Breathers - Fuel
5
Hex Nipple - Bronze
1
Hex Nipple - Stainless
3
C
Page
Capstans
80 81
Hinges - Stainless Steel
7
Cleat - Aluminium
33
Hose - Bilge
14
Cleat - Folding
32
Hose - Fuel
11
Cleat - Stainless
6
Hose - Live Well
14
Cleat - Sheet
33
Hose - Sanitation
13
Hose - Silcone Elbows & Bellows
12
13
D
Page
Dan Bouy - SOS
56
Hose - water
Deck Filler - Aluminium
34
Hose - Wet Exhaust
12, 13
Deck Filler - Plastic
34
Hose Connection - Bronze
1
Deck Filler - Stainless
6, 34
Hose connection - Stainless
3
Deck Filler Key
34
Hydro Generator
28
Deck Plate
29
Dock Line - Pre pack
17
Duct
14
E
Emergency Tiller
I
Instruments - Wind
J
Page
48
F
Page
26
Page
Jefa Steering System
45 to 47
Jefa Rudder Bearings
48, 49
L
Page
Page
Fairleads
9
Lazer - Rescue
Female Elbow - Bronze
2
Lifting Handle
8
Female Elbow - Stainless
4
Lifting Ring
8
Furlers Sail
50 to 54
Life Rafts
97, 98
G
55
M
Page
Page
Garhauer Deck Hardware
18, 19
Male Female Elbow - Bronze
2
Gas Cylinder
96
Male Female Elbow - Stainless
4
Male Hose Elbow - Bronze
1
Male hose Elbow - Stainless
5
Micropur
92
Index
P
T
Page
Page
Plug - Stainless
4
Tee - Stainless
4
Polish - Prism
96
Thrusters - Accessories
64, 65
Portlight - Cristal
41
Thrusters - Control panel
64
Portlight - Evolution
42
Thrusters - Electric Retractable
58, 59
Portlight - Flyscreen
44
Thrusters - Electric Tunnel
58
Portlight - Fixed
43
Thrusters - hydraulic
60
Portlight - Opal
42
Thrusters - hydraulic retractable
60 to 62
Portlight - Parts
44
Thrusters - Remote Control
64
Thrusters - Stern Pod
59
R
Page
Radio - VHF
24
Thrusters - Tunnel/ Pods
63
Reducing Bush - Bronze
2
Toe Rails
31, 32
Reducing bush - Stainless
4
Toe Rail - Accessories
31
Reef - Quick
55
Toilet - Electric
86 to 88
Rescue Laser
55
Toilet - Pump
88, 89
Rope - Accessories
17
Toilet - Vacuum
89
Rope - Challenge
16
Track
19
Rope - Closehaul
16
Track - Car
Rope - Cut Lengths
17
Rope - Double Braid
15
Rope - Nylon
16
Rope - Shock Cord
16
VB Brights Box
17
Rope - Silver
16
Vent - Hatch
44
Rope - SuperSpeed
15
Vent - Duct
14
Rope - VB Cord
15, 17
W
Rudder Bearings
48, 49
Washing Machine
95
Watermakers
90, 93, 94
50 to 54
Watermakers - Manual
91
Sea Scoop - Bronze
2
Watermakers - Parts
91
Simrad - electronics
20 to 24
Water Purification
92
Skin Fitting - Bronze
1
Watt & Sea
28
Skin Fitting - Stainless Steel
3
Wind Instruments
26
SOS Dan Buoy
56
Windlass - Chain Counters
82
Stanchion bases
30
Windlass - Circuit Breaker
83
Stanchions
30
Windlass - Control Switch
83
Steering - Jefa
45 to 47
Windlass - Foot switches
83
Strainer - Aluminium
10
Windlass - Horizontal
74 to 78
Strainer - Nickel Plated Bronze
10
Windlass - Parts
84, 85
Strut Bolts - Bronze
9
Windlass - Remote control
82
Windlass - Solenoid
83
Windlass - Vertical
67 to 82
S
Sail Furlers
19
U
Ultrasonic Antifouling
Page
97
V
Page
Page
Page

Wholesale catalogue 2013

Transcription

Similar documents

www.alubond.com Aluminium composite panels for facade cladding

AUTOMATIC AIR VENT FIG 1

Vetus Cowl Vent Sizes and Specifications

TBSMuir Windlass Enquiry form

Wood Stove SW740

kik-step®

see the Breckwell SW940I Wood Insert Brochure

Product sheet BBPE050.4A

impressions - Polychromal