HYUNDAI WIA CNC Turning Center

Transcription

E160 Series
HYUNDAI WIA CNC Turning Center
Technical Leader
The CNC Turning Center E160 Series was developd by Hyundai Wia, a Korean manufacturer of traditional machine tools. The
strength of its accumulated knowhow and state-of-the-art technology is designed to maximize productivity by enhancing both
technical performance and economic efficiency.
ITEM
Chuck
Bed
Turret
6″
8″
Standard
Long
Turn Mill
10 Station
12 Station
E160A
●
●
●
E160C
●
●
●
E160LA
●
●
E160LC
●
●
●
E160LMA
●
●
●
●
E160LMC
●
●
●
●
●
High Speed, High Rigidity and High Productivity
- The next generation affordable CNC Lathe
E160 Series
● 45° slanted one-piece high rigidity bed structure
● Least heat distortion, the most stabilized unit structure
● Able to extend, and high productive machine structure
● Unbeatable rapid travel speed: 30m/min
● The most reliable high speed servo turret is adopted: 0.1sec/step
● Environmental friendly, separate coolant and lubrication design
● Compact design, able to install within a narrow space.
● Ergonomic design allows convenient access to chuck and tool
E160C
E160LMA
01
E160 Series
Basic Features
The Best Productivity Popular 6 inch / 8 inch
Compact CNC Turning Center
01
High Precision, High Rigidity All in One Structure
A 45 degree slope type bed is combined with a square type and tube type rib structure, which
maintains a high rigidity. As absorption capablilty for vibration is good, powerful cutting and high
precision is maintained.
LM Guideway
02
LM guide is adapted on each guide section with 30m/min of
rapid feed speed. Especially, maintaining non-changeable
precision for sustained use by adopting a LM guide on the
wide surface, which can minimize malfuntion and wear that
occurs in general slides.
Main Spindle
Spindle is designed to maintain high precision for a long continous
operation by basically shuting off the heat with base and antiheat plates.
Turret
By installing a dodecagonal high speed
servo turret, tool separation speed is
increased (0.1sec/1step) and
productivity is improved by
reducing a cycletime
Ball Screw
Ball screw is fixed at its end by double anchor type, which makes it in
parallel with guide way and achieves a stable forwarding.
Especially, a ball screw with larger diameter is adopted and prepressure is applied, which improve thermal deformation and hardness.
03
04
HYUNDAI WIA
MACHINE TOOL
Basic Features
04
CnC Turning Center
02
01
E160 SERIES
03
04
+
05
Reduction of non-cutting time by rapid speed
◉Rapid Travel (X/Z axis) : 30/30 m/min
◉ Slide Way : LM GUIDE
◉Travel (X/Z axis)
E160A | E160C : 165/330 mm (6.5″/13″) E160LA | E160LC : 165/530 mm (6.5″/20.9″)
E160LMA | E160LMC : 165/460 mm (6.5″/18.1″)
E160A/LA
Power(kW)
70N.m (15min)
Torque(N.m)
11kW (15min)
11
E160LMA
Power(kW)
70
15kW (15min)
15
95.5N.m (15min)
7.5kW (Cont)
7.5
02
11
1,500 2,000
11kW (60min, Cont.)
95.6
70N.m(60min)
35.8N.m (Cont.)
0
Torque(N.m)
35.8
70
52.5N.m(Cont.)
High-Precision Spindle
52.5
Long Lasting High Accuracy & Excellent Performance
Spindle Speed (r/min)
CNC Turning Center
4,500
6,000
0
1,500 2,000
6,000
3,000
E160 Series
E160LMC
Power(kW)
Main Spindle
Torque(N.m)
15kW (15min)
15
The E160 Series spindle was designed with a precise and highly 171.8N.m (15min)
rigid spindle structrue by adapting a high speed angular ball bearing
11kW (Cont)
in the DB arrangement.
11
To ensure good safety in the powerful and heavy cutting it was 126N.m (60min)
designed with a structure balanced roller bearing and angular 94.5N.m (Cont.)
bearing in the P4 class.
171.8
0.001°
94.5
C-Axis Control
With machining such as milling, drilling and tapping, using a rotation
0
tool control from the spindle up to 0.001 degree is allowed and can
machine various type of product.
E160C/LC
Power(kW)
126N.m (15min)
7.5
Power(kW)
171.8N.m (30min)
Tail Stock
126
7.5kW (Cont)
64.4N.m (Cont.)
0
64.4
833 1,111
4,000
Torque(N.m)
171.8
15kW (30min)
Made it possible to process cutting stably by adopting 80mm(3.1″)
11kW (Cont.)
movable
as an option
and it also provides excellent quality.
126N.m (Cont.)
11 tailstock
126
(Long Bed : Standard)
Taper : MT
#4 Diameter : Ø55 (2.1″) Travel : 80 mm (3.1″)
1PH8 Spindle Motor
2,500
4,000
1,944
E160C/LC
Torque(N.m)
11kW (15min)
11
833 1,111
0
833 1,111
4,000
1,945
The characteristics of 1PH8 Series Motors include a maximum concentricity of 10
㎛, unsurpassed quality and a short operating period, which make them stand out
as superb machine tools in quality and performance.
E160A/LA
Power(kW)
10.8
75.6N.m (15min)
68.7N.m (Cont.)
500
9kW (Cont)
1,500
4,500
E160C/LC
Power(kW)
10.8kW (15min)
9
0
Torque(N.m)
10.8
113.4N.m (Cont.)
75.6
68.7
6,000
136N.m (15min)
9
0
278
Torque(N.m)
10.8kW (15min)
136
113.4
9kW (Cont)
833
2,500
4,000
HYUNDAI WIA
MACHINE TOOL
Spindle
FANUC Spindle Motor
11kW (15min)
11
70
Torque(N.m)
15kW (15min)
15
95.5N.m (15min)
7.5kW (Cont)
7.5
11
11kW (60min, Cont.)
95.6
70N.m(60min)
35.8N.m (Cont.)
0
E160LMA
Power(kW)
35.8
1,500 2,000
4,500
6,000
70
52.5N.m(Cont.)
0
52.5
1,500 2,000
3,000
6,000
E160LMC
Power(kW)
15
Torque(N.m)
06
+
07
15kW (15min)
171.8N.m (15min)
171.8
11kW (Cont)
11
126N.m (60min)
94.5N.m (Cont.)
0
94.5
833 1,111
1,944
4,000
E160C/LC
Power(kW)
126N.m (15min)
7.5
E160C/LC
Torque(N.m)
Power(kW)
171.8N.m (30min)
11kW (15min)
11
126
11
Torque(N.m)
171.8
15kW (30min)
11kW (Cont.)
126N.m (Cont.)
126
7.5kW (Cont)
64.4N.m (Cont.)
0
64.4
833 1,111
2,500
4,000
0
833 1,111
Power(kW)
E160A/LA
CNC Turning Center
70N.m (15min)
Torque(N.m)
E160 SERIES
E160A/LA
Power(kW)
1,945
4,000
Torque(N.m)
Power(kW)
E160C/LC
Torque(N.m)
03
E160 Series
Servo Turret
High speed, High Accuracy, Highly Reliable
Servo Turret
E160A | LA | LMA | LMC
◉ Number of Tools : 12 EA
◉ Tool Size (O.D/I.D)
□20/Ø32 (□0.8″/Ø1.2″)
◉ Indexing Time : 0.1 sec/step
(Mill Turret)
E160C | LC
◉ Number of Tools : 10 EA
◉ Tool Size (O.D/I.D)
□25 / Ø32 (□1″/Ø1.2″)
◉ Indexing Time : 0.1 sec/step
Turret
A high degree of accuracy is maintained by the index realized through a high-speed,
powerful servo motor and an excellent position control system of high accuracy. The
non-lift method applying 3-piece coupling is designed to prevent the intrusion of foreign
materials into the turret
VDI Tool is stablized with high speed separation from the servo
motor. Claim factors are reduced with a simple mechanism, which
ensures powerful clamping (4,532kg) by adapting a 3-piece coupling
and implementing the tool table index and tool rotation using only
one motor.
U-Drill
Angular Milling Head
CnC Turning Center
Straight Milling Head
E160 SERIES
Mill Turret (VDI)
HYUNDAI WIA
MACHINE TOOL
Turret
Drill
Endmill
Face Cutter
Endmill
Tap
Mill Tool Holder
Live milling tools may utilize an ER collet adapter, allowing both
faces to be fixed. This provides increased accuracy and
repeatability.
◉ Output (Max./Cont.) : 8.8 / 3 kW (11.8 / 4 HP)
Drill
Tap
◉ Speed : 4,500 r/min
◉ Collet size :
◉ Type :
Ø16 (Ø0.6″) (ER25)
VDI30
Collet & Cap
08
+
09
04
E160 Series
Machining Capability
Excellent Performance, High Accuracy Cutting
CNC Turning Center
E160LMA
Sample Workpieces
HYUNDAI WIA
MACHINE TOOL
Machining
O.D Cutting
〈Material〈JIS〉:S45C(Carbon steel〉
CnC Turning Center
Ø41
4 mm
150 m/min
1,165 r/min
0.3 mm/rev.
180 cc/min
E160 SERIES
Processing diameter
Side cutting depth
Cutting speed
Spindle rpm
Forwarding speed
Chip discharge
Tapping
Processing depth
Tap spec / pitch
Cutting speed
Tool rotation
Forwarding speed
15 mm
M10/1.5
6 m/min
200 r/min
1.5 mm/rev
10
+
11
End Mill
Processing depth
Tool Bore
Cutting speed
Tool rotation
Forwarding speed
Chip discharging amount
8 mm
Ø16
35 m/min
700 r/min
0.05 mm/rev
18 cc/min
❖ The above result might be different by types of processing circumstance
Machining Variation
O.D Cutting
Drilling
I.D Cutting
I.D Threading
Face Cutting
End Milling
O.D Hole Drilling
Ball-End Milling
05
E160 Series
Smart System
Software for Smart Operating
and Machining
Faster processing programming and enhanced processing accuracy are possible
through HYUNDAI WIA Smart System. It also maximizes productivity through equipment monitoring and environment-friendly software.
ing Functi
ons
nitor
Mo
Eas
y
HW-ESS
User Friendly
gy Saving
Ener
-MMS | HW-TM
HW
WIA Smart S
DA I
yst
N
U
em
HY CNC Turning Cen
ter
r
fo
g
Programmin
HW
NC
-DP
D
e
RO T/TM | HW-
USB Port (Standard)
Convenience is increased when inputting and outputting program. Because it
is now capable of using USB port in addition to current way like CF memory
card or LAN
(HYUNDAI WIA – Machine Monitoring System)
This software is for remote control monitoring of equipment status
(mobile, PC.)
It checks and manages the state of multiple pieces of equipment and
the progress of processing on a real time basis.
CnC Turning Center
HW-MMS
HYUNDAI WIA
MACHINE TOOL
HYUNDAI WIA Smart System
(HYUNDAI WIA – Tool Monitoring)
This is an equipment-monitoring software which checks the overload,
attrition and possible damage of equipment by analyzing the spindles
and the output load of the feed shaft generated during a processing
operation.
HW-DPRO T/TM
(HYUNDAI WIA – Dialogue PROgram Turn/TurnMill)
Using a dialogue method, this software makes it easy to work out a
program for a lathe processing operation with complicated
configurations. (Can be installed on a PC.)
HW-eDNC
(HYUNDAI WIA – Ethernet Direct Numerical Control)
This software transmits and receives the CNC of processing equipment,
the processing program and the NC data on a PC through the internet
or serial communications, while managing the processing program of
the CNC memory.
HW-ESS
(HYUNDAI WIA – Energy Saving System)
This is an environment-friendly power reduction software reducing the
standby power unnecessarily wasted in the equipment waiting for a
processing operation.
E160 SERIES
HW-TM
12
+
13
DIFFERENTIATED CAPABILITIES,
INTEGRATED ENGINEERING
PERFECTLY INTERLINKED
SIEMENS 828D is a latest model CNC that is capable of installing a
maximum of 6 spindles. It is designed for horizontal/vertical allpurpose equipment.
Through a 80-bit control, it makes possible reduction of
processing time and enhancement of productivity. It supports the
preparation of a variety of programs and setup functions. It is
easy to handle.
SIEMENS Technology
Shop Turn
SIEMENS Communication Function
Variable Communication Port
•Dialogue-type programming, simple and
convenient
•Effective specifications for small quantity
batch production
RJ 45 Ethernet
•Step-by-step operation possible without
knowledge of the DIN/ISO code
USB 2.0
Compact Flash Card
3D Simulation
•3-dimensional (3D) confirmation (an option)
of the completed processing configuration
of the NC program is possible.
•Offers standards for 2-dimensional
simulation (2D.)
Easy input/output of a program is possible as a USB
memory card, a CF memory card and LAN can all be
used.
•Possible to confirm the simulation of the NC
grogram during processing.
Easy Extend
•Easy to install/uninstall an option
(Example: barfeeder and chip conveyor, etc.)
•Possible to install in one motion without
revision of individual perimeters.
•A spate list is unnecessary as option items
are indicated with letters.
ISO Code
Programming
If the ISO Dialect (G291) is ordered, JIS-based
G-code programs can be used. (Standard)
SIEMENS Convenience Function
SIEMENS Easy Programming
HYUNDAI WIA
MACHINE TOOL
Controller
Easy Tool Measuring
CnC Turning Center
•Easy calculation (automatic and manual)
of the offset values of the installed
equipment
E160 SERIES
•Automatic input of the measured offset
values of equipment into the equipment
list
Work Offset Measuring
•Supports the function of work offset
calculation
•Automatic application of the measured
work offset value as the activated work
offset
Program Guide
Simple Program, High Productivity
•Use of cycle program minimizes program capacity.
•When cycle variables are input, graphic images
are provided.
Real Time PLC Monitoring
•Real time monitoring of PLC programs is
possible. Supports the “search” and
“cross reference” functions.
•Tool path and simulation of completed cycle
program are available.
•Various configurations can be processed using cycles.
•Real time verification of NC variables
and PLC interface
•Input/change of the values of variables
Block Searching
•Program can be re-started from a
particular location without editing the
processing program.
•Provides safety to the user.
Alarm Log
•A maximum of 500 alarms can be stored.
Engraving Cycle
Simple Letter Processing is Possible.
•The entire alarm log can be stored as a
data file in the NC
•Letters can be processed on products by
establishing a plane and inputting letters.
•The overall alarm history can be checked
through the alarm log.
•Letter size/angle/location/direction can be
designated.
•Capital and small letters of English can be
processed.
14
+
15
06
User Convenience
Various Devices for User Friendly
E160 Series
Bar Feeder System
Bar Feeder
When machining from bar stock, a bar feeder allows for
improved efficiency and unattended machining
Long Type
Max load processing capa.
Shot Type
Max load processing capa.
3m (118.1″)
Ø42 (1.7″)
1.5m (59.1″)
Ø65 (2.6″)
Parts Conveyor
An optional parts catcher collects finished parts
without the need to open the door, adding
productivity, especially when a bar feeder is
attached
Bar Feeder Process
Round Bar Material
Bar Feeder
Machining
Parts Catcher
Parts Conveyor
HYUNDAI WIA
MACHINE TOOL
Optional
E160 SERIES
CnC Turning Center
Gantry Loader System
16
+
17
Gantry Loader Machining Process
Construction of high speed gantry loaders is possible as well as the construction of flexible automation cells by a work
stocker. Optimization of the installation space is also possible. In particular, excellent machining effect is achieved during
continuous machining of both sides of the same or different work
Raw Material
In Work Stocker
1st Machining
Turn Over
Finishing
Out Work Stocker
2nd Machining
Specifications
Standard & Optional
Spindle & Chuck
E160A
E160C
●
Main Spindle
6″
○
●
Hollow Chuck 3 Jaw
8″
○
Main Spindle
6″
-
○
Solid Chuck 3 Jaw
8″
●
●
Standard Soft Jaw (1set)
●
●
Chuck Clamp Foot Switch
○
○
2 Steps Hyd, Pressure Device
☆
☆
Spindle Inside Stopper
☆
☆
5° Index
-
Cs-Axis (0.001°)
●
●
Chuck Open/Close Confirmation Device
☆
☆
2 Steps Chuck Foot Switch
Turret
●
●
Tool Holder
-
Axiall
Mill Turret
-
Straight Milling Head (Axial) Collet Type,1ea
-
Angular Milling Head (Radial) Collet Type,1ea
-
Straight Milling Head (Axial) Adapter Type
-
Angular Milling Head (Radial) Adapter Type
●
●
Boring Sleeve
●
●
Drill Socket
○
○
U-Drill Holder
○
○
U-Drill Holder Sleeve
☆
☆
For Out-Dia
O.D Extension Holder
-
Swivel Head
Tail Stock & Steady Rest
○
○
Quill Type Tail Stock
-
Programable Tail Stock
-
Manual Type Hyd. Steady Rest
○
○
Standard Live Center (Tail Stock : Standard)
☆
☆
High Precesion Live Center
☆
☆
2 Steps Tail Stock Pressure System
○
○
Quill Forward/Reverse Confirmation Device
☆
☆
Tail Stock Foot Switch
Coolant & Air Blow
●
●
Standard Coolant (Nozzle)
○
○
Chuck Coolant (Upper Chuck)
○
○
Gun Coolant
☆
☆
Spindle Thru Coolant (Only for Special Chuck)
-
Thru Coolant for Live Tool
○
○
Chuck Air Blow (Upper Chuck)
☆
☆
Tail Stock Air Blow (Upper Tail Stock)
☆
☆
Turret Air Blow
○
○
Air Gun
☆
☆
Spindle Thru Air Blow (Only for Special Chuck)
○
○
6Bar
High Pressure Coolant
☆
☆
Power Coolant System (For Automation)
☆
☆
Coolant Chiller
Chip Disposal
●
●
120ℓ
Coolant Tank
○
○
125ℓ
○
○
Front(Right)
Chip Conveyor
-
Front(Left)
(Hinge/Scraper)
○
○
Rear(Rear)
☆
☆
Special Chip Conveyor (Drum Filter)
○
○
Standard (180ℓ) ○
○
Swing (200ℓ)
○
○
Large Swing (290ℓ) Chip Wagon
○
○
Large Size (330ℓ) ☆
☆
Costomized
Safety Device
●
●
Door Inter-Lock
●
●
Total Splash Guard
●
●
Chuck Pressure Failure Detector
●
●
Back Spin Torque Limiter (BST)
☆
☆
Torque Limiter
Specifications are subject to change for improvement without notice.
● : Standard ○ : Option ☆ : Prior Consultation - Non Application
Electric Device
E160A
E160C
●
●
○
○
○
○
○
○
-
○
○
FANUC
●
●
SIEMENS
○
○
FANUC
●
●
SIEMENS
○
○
Digital
○
○
Digital
○
○
Digital
○
○
6ea
Multi Tool Counter
○
○
9ea
Electric Circuit Breaker
○
○
●
●
FANUC
ABS Encoder
●
●
SIEMENS
AVR (Auto Voltage Regulator)
☆
☆
Transformer
○
○
20kVA
Auto Power Off
○
○
Measurement
Q-Setter
○
○
Automatic Q-Setter
○
○
Work Close Confirmation Device TACO
○
○
(Only for Special Chuck)
○
○
SMC
Work Setter
☆
☆
-
X axis
Linear Scale
-
Z axis
Coolant Level Sensor (Only for Chip Conveyor)
☆
☆
Environment
○
○
FANUC
Air Conditioner
●
●
SIEMENS
Dehumidifier
○
○
Oil Mist Collector
○
○
Oil Skimmer (Only for Chip Conveyor)
○
○
MQL (Minimal Quantity Lubrication)
☆
☆
Fixture & Automation
Auto Door
○
○
Auto Shutter (Only for Automatic System)
☆
☆
Sub Operation Pannel
☆
☆
Bar Feeder Interface
○
○
Bar Feeder (FEDEK)
☆
☆
Extra M-Code 4ea
○
○
Automation Interface
☆
☆
○
○
16Contact
I/O Extension (IN & OUT)
○
○
32Contact
Parts Catcher
○
○
Main SP.
Turret Work Pusher (For Automation)
☆
☆
Parts Conveyor
☆
☆
Semi Automation System
☆
☆
Hyd. Device
Standard Hyd. Cylinder
●
●
Hollow
Standard Hyd. Unit
●
●
35bar/11ℓ
S/W
Machine Guidance (HW-MCG : FANUC)
☆
☆
Tool Monitoring (HW-TM : FANUC)
○
○
DNC software (HW-eDNC : FANUC)
○
○
Dialogue Program
○
○
Energy Saving System (HW-ESS : FANUC)
○
○
Machine Monitoring System (HW-MMS : FANUC) ☆
☆
ETC
Tool Box
●
●
Customized Color
☆
☆
Need Munsel No.
CAD & CAM
☆
☆
Call Light
Call Light
Call Light & Buzzer
Electric Cabinet Light
Remote MPG
Spindle Load Meter
(LED Type)
Spindle Speed Meter
(LED Type)
Work Counter
Total Counter
Tool Counter
1 Color : ■
3 Color : ■■■
3 Color : ■■■B
Specifications
Standard & Optional
E160LA
E160LC
●
●
○
○
○
○
○
○
-
○
○
FANUC
●
●
SIEMENS
○
○
FANUC
●
●
SIEMENS
○
○
Digital
○
○
Digital
○
○
Digital
○
○
6ea
Multi Tool Counter
○
○
9ea
○
○
●
●
FANUC
ABS Encoder
●
●
SIEMENS
☆
☆
Transformer
○
○
20kVA
Auto Power Off
○
○
Measurement
Q-Setter
○
○
Automatic Q-Setter
○
○
○
○
○
○
SMC
Work Setter
☆
☆
-
X axis
Linear Scale
-
Z axis
☆
☆
Environment
○
○
FANUC
Air Conditioner
●
●
SIEMENS
Dehumidifier
○
○
Oil Mist Collector
○
○
○
○
☆
☆
Auto Door
○
○
☆
☆
☆
☆
○
○
Bar Feeder (FEDEK)
☆
☆
Extra M-Code 4ea
○
○
☆
☆
○
○
16Contact
○
○
32Contact
Parts Catcher
○
○
Main SP.
☆
☆
Parts Conveyor
☆
☆
☆
☆
Hyd. Device
●
●
Hollow
Standard Hyd. Unit
●
●
35bar/11ℓ
S/W
☆
☆
○
○
○
○
Dialogue Program
○
○
○
○
☆
ETC
Tool Box
●
●
Customized Color
☆
☆
Need Munsel No.
CAD & CAM
☆
☆
Call Light
Call Light
Call Light & Buzzer
Remote MPG
Spindle Load Meter
(LED Type)
Spindle Speed Meter
(LED Type)
Work Counter
Total Counter
Tool Counter
1 Color : ■
3 Color : ■■■
3 Color : ■■■B
HYUNDAI WIA
MACHINE TOOL
Electric Device
CnC Turning Center
E160LA
E160LC
●
Main Spindle
6″
○
●
Hollow Chuck 3 Jaw
8″
○
Main Spindle
6″
-
○
Solid Chuck 3 Jaw
8″
●
●
●
●
○
○
☆
☆
☆
☆
5° Index
-
Cs-Axis (0.001°)
●
●
☆
☆
Turret
●
●
Tool Holder
-
Axiall
Mill Turret
-
-
-
-
●
●
Boring Sleeve
●
●
Drill Socket
○
○
U-Drill Holder
○
○
☆
☆
For Out-Dia
-
Swivel Head
●
●
-
-
○
○
☆
☆
☆
☆
○
○
☆
☆
Coolant & Air Blow
●
●
○
○
○
○
Gun Coolant
☆
☆
-
○
○
☆
☆
☆
☆
Turret Air Blow
○
○
Air Gun
☆
☆
○
○
6Bar
☆
☆
☆
☆
Coolant Chiller
Chip Disposal
●
●
120ℓ
Coolant Tank
○
○
125ℓ
○
○
Front(Right)
Chip Conveyor
-
Front(Left)
(Hinge/Scraper)
○
○
Rear(Rear)
☆
☆
○
○
○
Swing (200ℓ)
○
○
○
○
☆
Costomized
Safety Device
●
●
Door Inter-Lock
●
●
Total Splash Guard
●
●
●
●
☆
☆
Torque Limiter
E160 SERIES
Spindle & Chuck
18
+
19
Specifications
Standard & Optional
Spindle & Chuck
E160LMA
E160LMC
●
Main Spindle
6″
○
●
Hollow Chuck 3 Jaw
8″
○
Main Spindle
6″
-
○
Solid Chuck 3 Jaw
8″
●
●
●
●
○
○
☆
☆
-
5° Index
●
●
Cs-Axis (0.001°)
●
●
☆
☆
Turret
●
●
Tool Holder
●
●
Axiall
Mill Turret
●
●
●
●
○
○
○
○
●
●
Boring Sleeve
●
●
Drill Socket
○
○
U-Drill Holder
○
○
-
For Out-Dia
☆
☆
Swivel Head
●
●
-
-
○
○
☆
☆
☆
☆
○
○
☆
☆
Coolant & Air Blow
●
●
○
○
○
○
Gun Coolant
☆
☆
-
○
○
☆
☆
☆
☆
Turret Air Blow
○
○
Air Gun
☆
☆
○
○
6Bar
☆
☆
☆
☆
Coolant Chiller
Chip Disposal
●
●
120ℓ
Coolant Tank
○
○
125ℓ
○
○
Front(Right)
Chip Conveyor
-
Front(Left)
(Hinge/Scraper)
○
○
Rear(Rear)
☆
☆
○
○
○
Swing (200ℓ)
○
○
○
○
☆
Costomized
Safety Device
●
●
Door Inter-Lock
●
●
Total Splash Guard
●
●
●
●
☆
☆
Torque Limiter
Electric Device
E160LMA
E160LMC
●
●
○
○
○
○
○
○
-
○
○
FANUC
-
SIEMENS
○
○
FANUC
-
SIEMENS
○
○
Digital
○
○
Digital
○
○
Digital
○
○
6ea
Multi Tool Counter
○
○
9ea
○
○
●
●
FANUC
ABS Encoder
-
SIEMENS
☆
☆
Transformer
○
○
20kVA
Auto Power Off
○
○
Measurement
Q-Setter
○
○
Automatic Q-Setter
○
○
○
○
○
○
SMC
Work Setter
☆
☆
-
X axis
Linear Scale
-
Z axis
☆
☆
Environment
Air Conditioner
○
○
Dehumidifier
○
○
Oil Mist Collector
○
○
○
○
☆
☆
Auto Door
○
○
☆
☆
☆
☆
○
○
Bar Feeder (FEDEK)
☆
☆
Extra M-Code 4ea
○
○
☆
☆
○
○
16Contact
○
○
32Contact
Parts Catcher
○
○
Main SP.
☆
☆
Parts Conveyor
☆
☆
☆
☆
Hyd. Device
●
●
Hollow
Standard Hyd. Unit
●
●
35bar/11ℓ
S/W
☆
☆
○
○
○
○
Dialogue Program
○
○
○
○
☆
ETC
Tool Box
●
●
Customized Color
☆
☆
Need Munsel No.
CAD & CAM
☆
☆
Call Light
Call Light
Call Light & Buzzer
Remote MPG
Spindle Load Meter
(LED Type)
Spindle Speed Meter
(LED Type)
Work Counter
Total Counter
Tool Counter
1Color : ■
3Color : ■■■
3Color : ■■■B
550(
425(16.7)
497(19.6)
466(1
375
(14.7)
770(30.3)
565(22.2)
449(17.6)
450(17.7)
40
5
(1.6) (0.2)
940(37)
Specifications
10 170
(0.4) (6.7)
1000(39.3)
340(13.4)
External Dimensions
unit : mm(in)
877(34.5)
153
(6)
CnC Turning Center
E160 SERIES
865(34) - E160C
290(11.4)
1663(65.4)
925(36.4)
298(11.7)
Ø210
(8.2)
1435(56.5)
985(38.7)
450(17.7)
440(17.3)
425(16.7)
850((33.5)
HYUNDAI WIA
MACHINE TOOL
E160C/A {i-TROL}
510(20)
540(21.2)
{591(23.3)}
600(23.6)
857(33.7) - E160A
1274(50.1)
{1223(48)}
Ø169
(6.6)
20
+
21
510(20)
370(14.5)
620(24.4)
380(15)
1940(76.3)
{1991(78.4)}
60(2.3)
{111(4.4)}
565(22.2)
449(17.6)
450(17.7)
940(37)
497(19.6)
{495(19.5)}
375
(14.7)
170(6.7)
{160(6.3)}
40
5
(1.6) (0.2)
10
(0.4)
425(16.7)
340(13.4)
770(30.3)
1000(39.3)
466(18.3)
550(21.6)
{520(20.5)}
SPINDLE CENTER
Specifications
External Dimensions
unit : mm(in)
E160LC/LMC
E160LA/LMA
1127(44.4)
153
(6)
1663(65.4)
995(39.2)
228
(8.9)
Ø210
(8.2)
985(38.7)
1435(56.5)
450(17.7)
440(17.3)
425(16.7)
850((33.5)
865(34) - E160C
290(11.4)
520(20.4)
580(22.8)
630(24.8)
630(24.8)
Ø169
(6.6)
857(33.7) - E160A
510(20)
470(18.5)
620(24.4)
530(20.8)
497(19.6)
425(16.7)
340(13.4)
449(17.6)
450(17.7)
850((33.5)
940(37)
40
5
(1.6) (0.2)
877(34.5)
10 170
(0.4) (6.7)
565(22.2)
375
(14.7)
770(30.3)
1000(39.3)
466(18.3)
550(21.6)
2130(83.8)
153
90
(3.5)
1334(52.5)
Specifications
Tooling System
unit : mm
Boring Bar
Facing Holder
Face & I.D
Tool
U-Drill Holder
U-Drill
CnC Turning Center
HYUNDAI WIA
MACHINE TOOL
E160A/LA
E160C/LC
Boring Bar
Socket
Boring Bar
Holder
Drill
E160 SERIES
10 Stations
12 Stations
22
+
23
Tooling Parts Detail
ITEM
O.D Holder
E160C
E160LA
E160LC
-
-
1
1
-
-
1
1
Single
5
4
5
Single (Ø40[1.6″])
-
Opt
Opt
Ø20 (0.8″)
Opt
Opt
Ø25(1″)
Opt
Opt
Straight Mill Holder MillStandard
Holder
-
Angular Mill Holder
Standard
-
Ø8 (5/16″)
1
1
Ø10 (3/8″)
1 30
VDI
1
Ø12 (1/2″)
12
Stations
1
1
1
1
Ø16 (5/8″)
1
1
1
Boring Bar
1
Socket
Facing Holder
I.D Holder
Boring Holder
Milling U-Dril
Collet Holder
Angular
Driven Holder
E160A
Straight
Mill Holder
Turning
Holder Tapping Collet
Tap
End Mill
Right/Left
Boring
Socket
Drill
ER Collet
Plug
1
O.D Holder
4 & I.D
Face
Tool
Opt
Opt
Opt
Opt
Opt
-
-
-
-
-
-
Ø20 (3/4″)
1
1
Ø25 (1″)
Opt
Opt
MT 1 × MT 2
1
-
Facing Holder
1
I.D Holder
1
1
Boring Bar
1
1
Drill
Opt
Opt
1
1
-
-
-
-
10 Stations
Boring Bar
Socket
Boring Bar
Holder
Specifications
U-Drill Holder
Drill
U-Drill
12 Stations
Tooling System
unit : mm(in)
E160LMA
E160LMC
Tap
Tapping Collet
O.D Holder
Straight
Mill Holder
Face & I.D
Tool
End Mill
Facing Holder
Milling Collet
Angular
Mill Holder
Plug
VDI 30
12 Stations
I.D Holder
Boring Bar
Boring Bar
Socket
Drill
Tooling Parts Detail
E160LMA/LMC
ITEM
Turning Holder
O.D Holder
Facing Holder
4
1
Single
3
Single (Ø40[1.6″])
-
Ø20 (0.8″)
-
Ø25(1″)
-
Straight Mill Holder
Standard
1
Angular Mill Holder
Standard
1
Ø8 (5/16″)
1
Ø10 (3/8″)
1
Ø12 (1/2″)
1
Ø16 (5/8″)
1
I.D Holder
Boring Holder
U-Dril Holder
Driven Holder
Right/Left
Boring
Socket
Drill
ER Collet
Ø20 (3/4″)
1
Ø25 (1″)
-
MT 1 × MT 2
Opt
Specifications
Interference
9
16
ø
.6)
(ø6
11)
30 (1.2)
ø1
60
ø32 (ø1.2)
6.5)
69
6.
3)
(ø6
.6)
E160 SERIES
ø1
(ø
ø280 (ø11)
35 (1.4)ø
ø2
E160C/LC
80
10 (0.4)
35 (1.4)
96
ø4 .5)
(19
(ø1
1)
ø
(1 460
8.
1)
ø3
(1 2
.3)
ø
(ø 270
10
.6
)
(ø
ø165
CnC Turning Center
)
(ø19.5
ø2
80
10 (0.4)
ø496
E160A/LA
(ø
11
)
0 (ø
ø28
19
ø7
(ø8.
3)
0(
.5)
ø210
ø2
10
(ø
)
)
E160LMA/LMC
ø
5(
5
ø1
ø1
2
ø14
)
6.1
)
.6
(ø5
90
(ø
7.5
)
ø15
0 (ø
5.9
)
ø97
(ø3.
8)
8.3
6.1
5 (ø
ø15
HYUNDAI WIA
MACHINE TOOL
unit : mm(in)
ø95
(ø3
.7)
5
ø9 .7)
3
(ø
ø16
(ø6 0
.3)
194.25 (7.6)
25 (1)
95 (3.7) 65 (2.5)
379.25 (149.3)
24
+
25
Specifications
Tooling Travel Range
unit : mm(in)
Tail Stock have
E160A
E160C
OD tool
OD tool
30
145
(5.7) 5 (1.2)
(0.2)
120 46
(4.7) (1.8)
330
(13)
15
(0.6)
16
(1.6)
7
(0.3)
142
(5.6)
259
(10.2) 314
(12.4)
192(7.5)
260(10.2)
90
(3.5)
53
(2.1)
260(10.2)
30(1.2)
40
(1.6)
90
(3.5)
ø55
(2.2)
120 46
(4.7) (1.8)
ø210(8.3)
ø55
(2.2)
ø169
(6.6)
5
(0.2)
Tail stock (Opt.)
46
48
(4.7) (1.9)
72(2.8) 80(3.1) 111(4.4)
80
(3.1)
129
(5.1)
30(1.2)
40
(1.6)
330
(13)
ø32
(1.3)
ø210(8.3)
ø32
(1.3)
5
(0.2)
120 46
(4.7) (1.8)
15(0.6)
25 45 80(3.1)
(1)(1.8)
5
(0.2)
48
(1.9)
Tail stock (Opt.)
44
95 32
(1.7) (3.7) (1.2)
17
(0.7)
ID tool
330
(13)
15(0.6)
25 45 80(3.1)
(1)(1.8)
5
(0.2)
ø169
(6.6)
53
(2.1)
55
(2.2)
6
(0.2)
ID tool
44
95 32
(1.7) (3.7) (1.2)
5
(0.2)
145
(5.7)
5
(0.2)
57
(2.2)
25
(1)
20
(0.8)
20
(0.8)
ø169
(6.6)
273(10.7)
330(13)
48
(1.9)
5
(0.2)
20
(0.8)
330
(13)
ø210
(8.3)
44
95 32
(1.7) (3.7) (1.2)
121
(4.8)
Tail Stock does not have
51(2)80(3.1)
200(7.9)
111(4.4)
(Quill Out) (Quill In)
(Quill Out) (Quill In)
(Tail Stock Travel)
200(7.9)
Specifications
Tooling Travel Range
HYUNDAI WIA
MACHINE TOOL
unit : mm(in)
E160LC/LMC E160LA/LMA
OD tool
E160 SERIES
CnC Turning Center
OD tool
ID tool
Straight milling head
26
+
27
Angular milling head
Tail stock (Opt.)
Specifications
Specifications
[
E160A
ITEM
CAPACITY
Swing Over the Bed
mm(in)
Swing Over the Carriage
mm(in)
Max. Turning Dia.
mm(in)
Max. Turning Length
mm(in)
Bar Capacity
mm(in)
Ø45 (1.8″)
Chuck Size
mm(in)
Ø169 (6.7″)
Spindle Bore
mm(in)
Ø55 (2.2″)
Spindle Speed (rpm)
Spindle
r/min
Motor (Max/Cont.)
Torque (Max/Cont.)
mm(in)
m/min
NC
12
Ø32 (1.3″)
0.1
sec/step
kW(HP)
-
r/min
-
4,500
N.m(lbf.ft)
-
45/20 (33.2/15)
Taper
Machine
165/460 (6.5″/18.1″)
LM GUIDE
□20 (0.8″)
Torque (Max/Cont.)
0.001˚
30/30
mm(in)
Type
power
Supply
165/530 (6.5″/20.9″)
mm(in)
Collet Size
tank
Capacity
165/330 (6.5″/13″)
ID
Milling Tool Speed (rpm)
TAIL STOCK
-
OD
Motor (Max/Cont.)
95.5/52.5 (70.4/38.7)
A2-5
EA
Indexing Time
6,000
15/11 (20/15)
BELT
-
No. of Tool
450 (17.7″)
6,000 [6,000]
deg
Slide Type
live tool
Ø190 (7.5″)
510 (20.1″)
7 0/35.8 (51.6/26.4) [75.6/68.7 (55.7/0.6)]
Rapid Travel (X/Z/B)
300 (11.8″)
-
Travel (X/Z/B)
Tool Size
Ø285 (11.2″)
Ø280 (11″)
N.m(lbf.ft)
C-axis Indexing
turret
Ø480 (18.9″)
11/7.5 (15/10) [10.8/9 (14.5/12)]
Spindle Nose
] : Option
E160LMA
kW(HP)
Spindle Type
Feed
E160LA
mm(in)
-
Ø16(0.6″) ER25
-
-
VDI30
MT4
-
Quill Dia.
mm(in)
Quill Travel
mm(in)
Travel
mm(in)
Coolant Tank
ℓ(gal)
130 (34.3)
Lubricating Tank
ℓ(gal)
1.8 (0.5)
Electric Power Supply
Thickness of Power Cable
Voltage
kVA
80 (3.1″)
200 (7.9″)
Height
mm(in)
Weight
kg(lb)
-
470 (18.5″)
13
16
Over 16
220/60 (200/50)
V/Hz
mm(in)
Ø55 (2.2″)
Sq
Floor Space (L×W)
Controller
8.8/3.0 (11.8/4)
1,940×1,660 (76.4″×65.4″)
[1,991×1,660 (78.4″x65.4″)]
2,130 x 1,660 (83.9″×65.4″)
1,602 (63.1″)
2,400 (5,291)
2,840 (6,261)
HW FANUC i Series [E160A : i-TROL] [E160A/LA : SIEMENS 828D BASIC]
Specifications
Specifications
[
E160C
ITEM
Swing Over the Bed
mm(in)
Swing Over the Carriage
mm(in)
Max. Turning Dia.
mm(in)
Max. Turning Length
mm(in)
Bar Capacity
mm(in)
Ø51 (2″)
Chuck Size
mm(in)
Ø210 (8.3″)
Spindle Bore
mm(in)
Ø62 (2.4″)
r/min
Motor (Max/Cont.)
Spindle
kW(HP)
Torque (Max/Cont.)
N.m (lbf.ft)
deg
mm(in)
Rapid Travel (X/Z/B)
m/min
Tool Size
OD
ID
NC
165/530 (6.5″/20.9″)
171.8/94.5 (126.7/69.7)
0.001˚
165/460 (6.5″/18.1″)
30/30
LM GUIDE
EA
10
mm(in)
□25 (1″)
12
□20 (0.8″)
Ø32 (1.3″)
mm(in)
0.1
kW(HP)
-
8.8/3.0 (11.8/4)
r/min
-
4,500
N.m(lbf.ft)
-
45/20 (33.2/15)
mm(in)
-
Ø16 (0.6″) ER25
Type
-
-
VDI30
Taper
-
Torque (Max/Cont.)
MT4
Quill Dia.
mm(in)
Ø55 (2.2″)
Quill Travel
mm(in)
80 (3.1″)
Travel
mm(in)
Coolant Tank
ℓ(gal)
Lubricating Tank
ℓ(gal)
Electric Power Supply
Thickness of Power Cable
Voltage
kVA
Height
mm(in)
Weight
kg(lb)
200 (7.9″)
-
470 (18.5″)
130 (34.3)
1.8 (0.5)
13
16
Over 16
Sq
mm(in)
Controller
220/60 (200/50)
V/Hz
Floor Space (L×W)
HYUNDAI WIA
MACHINE TOOL
4,000
15/11 (20/15)
-
165/330 (6.5″/13″)
sec/step
Collet Size
Machine
126/64.4(92.9/47.5) [171.8/126(126.7/92.9)]
[136/113.4(100.3/83.6)]
-
Milling Tool Speed (rpm)
power
Supply
4,000 [4,000] [4,000]
A2-6
Travel (X/Z/B)
450 (17.7″)
11/7.5(15/10) [15/11(20/15)] [10.8/9(14.4/12)]
BELT
Motor (Max/Cont.)
tank
Capacity
-
Indexing Time
TAIL STOCK
Ø190 (7.5″)
510 (20.1″)
-
No. of Tool
live tool
280 (11″)
Spindle Nose
Slide Type
turret
Ø285 (11.2″)
Ø280 (11″)
Spindle Type
C-axis Indexing
Feed
Ø480 (18.9″)
CnC Turning Center
Spindle Speed (rpm)
] : Option
E160LMC
E160 SERIES
CAPACITY
E160LC
1,940×1,660 (76.4″×65.4″)
[1,991×1,660 (78.4″x65.4″)]
2,130×1,660 (83.9″×65.4″)
1,602 (63.1″)
2,500 (5,511)
2,930 (6,459)
HW FANUC i Series [E160C : i-TROL] [E160C/LC : SIEMENS 828D BASIC]
28
+
29
Controller
SIEMENS 828D BASIC (E160A/LA/C/LC)
Control function
Max. configuration of axis
Max. configuration of axis and sp.
Least Command/input
Feed function
Feedrate Override
Rapid Traverse Override
Acceleration with jerk limitation
Programmable acceleration
Follow-up mode
Measuring system 1 and 2, selectable
Separate path feed for corners and chamfers
Travel to fixed stop
Spindle function
Spindle Override
Spindle Orientation
Spindle Speed Limitation
Rigid Tapping
Interpolation function
Linear interpolation axis
Circle via center point and end point
Circle via interpolation point
Helical interpolation
Universal interpolator NURBS
(non-uniform rational B splines)
Continuous-path mode with programmable
rounding clearance
Tool function
Tool Radius Comp.
Zero Offset (G54, G55, G56, G57 ,G58, G59)
Programmable Zero Offset
Tool management
Display
CRT / MDI
Screen Saver
Manual Operation
Manual Handle/Jog Feed
Reposition
Reference Approach
Spindle Control
Auto Operation
Single Block
Feed Hold
Optional Block Skip
Machine Lock
Dry Run
Simulation
Diagnosis function
Alarm Display
Spindle Load/rpm Meter
PLC status/LAD display
Program function
Part Program Storage Length
Program Name
Subroutine Call
Absolute/incremental Command
Scaling, ROT
Inch / Metric Conversion
Conversational Cycle Program
Block Search
Variable Program (Macro)
Read / Write System Variable
BackGround Editing
Miscellaneous Functions
Lable Skip
Program Stop/End
Lookahead , Jerk LimitationFeed &forward control
ISO Dialect Interpreter(G291) (Fanuc Program exe)
Maximum number of tools/cuttings
Number of levels for skip blocks 1
3 Axis
5 Axis
0.0001mm / 0.00001inch
0 - 120%
F1, 5, 25/50, 100%
Protection Function
Emergency Stop
Over Travel
Contour Monitoring
Program Protection
Automation Support Fun.
Actual Speed Display(Monitor)
Tool Life Management
Work Count Function
Language Function
Two Language switchable
50% - 120%
Max. 4 Axis
50EA
8.4˝ Color LCD
Ref 1, 2 Approach
Start, Stop, Rev, Jog, Ort.
(2 dimensional)
1MB
23 digit
(7 level)
G90 - G91
(22 Machine)
M - Code
M00, M01, M02, M30
80/160
Figures in inch are converted from metric values.
Design and specifications subject to change without notice.
Data Transfer
RS 232C I/F / Ethernet
USB Memory Stick & CF Card
Option
Shop Turn
3D Simulation
DRF offset
Teach -in
Number of levels for skip blocks 8
TRACYL (Cylinder interpolation)
TRANSMIT (Pole coordinate command)
Sister Tool
A,B,C Spline Interpolation
RCS Host (Remote Control)
Simultaneous Recording (real time monitoring)
Analysis of Internal Drive Values
Network Drive Management
Soft Limit & Hard O.T
(Time, Parts)
(Internal)
Chinese Traditional, Czech, Danish,
Dutch, Finnish, Hungarian, Japanese,
Korean, Polish, Russian, Swedish,
Portuguese, Turkish
Controller
HYUNDAI WIA FANUC i Series
Min. input unit
Min. increment
High speed HRV control
Inch/metric conversion
Interlock
Machinelock
Emergency stop
Stroke check 1
Stroke check 2
Stroke check 3
Follow up
Sub off
Backlash compensation
Position switch
Fault load detection
High resolution transfer control (HRM)
LCD / MDI
Operation
Auto handling (memory)
MDI handling
Search function
Program re-start
Preventive function for mis-handling
Buffer registration
Program check function
Single block
Feed function
Manual jog feed
Manual Handle Scale
Feed command
Feed override
Jog override
Rapid transfer override
Override release
Transfer/minute, transfer/rpm
Program input and interpolation function
Nano interpolation
Dwell function
Threading retract
Variable lead threading
Return of first zero point
Return check of zero point
Return of second zero point
Program stop/over
Tape code
Optional block skip
Max. program enter unit
Program number
Absolute, incremental programming
Decimal number entering
Plain selection
Work coordinate selection
Manual absolute
Drawing dimension direct input programming
G code system
Programmable data input
Sub program call
Custom macro B
Custom macro variable addition
Multiple repetitive cycles
Multiple repetitive cycles Ⅱ
Lathe fixed cycle
Manual guide i
G20 / G21
Each axis / All axis
Full axis
Over-travel
+/- 0~9999 Pulse (Rapid traverse & cutting feed)
Back spin torque limiter (BST)
8.4″ Color LCD
Sequence, Program
Dry run, Program check
Rapid transfer, Jog, Handle
x1, x10, x100
Direct command for F code feed
0~200% (10% units)
0~2,000 mm/min [79 ipm]
F1, F5, F25 / F50, F100%
Positioning/Straight/Arc (G00/G01/G02/G03)
G04, 0~9999.9999 sec
G28, manual
G27
G30
M00, M01 / M02, M30
EIA / ISO
1 EA
+/- 9999.9999”
O+4 digit number
G17, G18, G19
G52 to G59
“ON” fixed
Included chamfering / Corner R`
A/B/C
G10
10 Steps
#100 to #199, #500 to #999
Interactive program
Option
High speed Ethernet
Optional block skip
3rd & 4th reference point return
Program storing capacity
Data Server
Polygon turning
Dynamic graphic display
8 level data protection function
Tool load monitoring function
Manual guide i
M4 digit number
S + 4 digit number, binary number output
G96, G97
50% ~ 150% (10% unit)
T2 + 2
64 pairs
HYUNDAI WIA
MACHINE TOOL
Simultaneous control axis number
Sub / Main spindle function
M-Code function
M-Code function lock
Lock sp. speed command
Main sp. constant control
Spindle speed override
Spindle position decision
Rigid tapping
Tool function / Tool compensation
Tool function
Tool offset quantity
Tool offset
Tool nose radius compensation
Configuration/wear compensation
Direct input of measuring tool compensation B
Tool life management
Data input, output and editing function
Input/output interface
Memory card input and output
Program storing capacity
Program registration quantity
Memory lock
Background edit
Additional expandable edit
Screen, diagnosis and setting function
Self diagnosis function
Historic screen
Help function
Outside message
Operation time/counter display
Actual sp. speed, T code display
Actual machining feed rate display
Handling monitor screen
Graphic screen
Spindle/servo setting screen
Languages
LCD screen save
Auto data backup
Function according with machine specification
Cs contouring function
Stored pitch error compensation
Pole coordinate command
Cylinder interpolation
Drill fixed cycle
Sp. positioning expandable
Controlling live tool by servo motor
G40, G41, G42
CnC Turning Center
Control axis number
Max. 4 axis
X, Z axis
X, Z, C axis (M type machine)
2 axis/straight, arc interpolation (Max. 4 axis)
X, Z, Y, B axis : 0.001mm (0.0001″)
C axis : 0.001 deg.
X, Z, Y, B axis : 0.001mm (0.0001″)
C axis : 0.001 deg.
RS232C, Memory Card
512 Kbyte
Max. 500 programs
NC program copy, move, change
Alarm and handling screen
Rod meter light
Screen saver
Turn
Turn
Turn
Turn
Turn
Turn
Turn
mill
mill
mill
mill
mill
mill
mill
100 Mbps (Option board is required)
9 EA
512 Kbyte
1GB
HWTM (embedded Fanuc type)
Interactive program (10.4″Color LCD)
E160 SERIES
Control function / Screen display
30
+
31
Controller
i-TROL (E160A/C)
Control & Composition
Number of axes/Spindles
Number of axes/Spindles, max.
Color display
Keyboard
Part program
Addition of part program on CF card
Transfer Function
Feedrate override
Transfer value input range
Unlimited rotation of rotation axis
Acc./Dec. with jerk limitation
Measuring systems 1 and 2, selectable
Travel to fixed stop
Auto Servo Tuning (AST)
Spindle Function
Spindle override
Spindle speed, max. programmable value range
Automatic gear stage selection
Spindle orientation
Spindle speed limitation
Rigid tapping
Spindle control with PLC
Interpolation
Linear interpolation axes, max.
Circle via center point and end point
Circle via interpolation point
Non-uniform rational B splines
Continuous - path mode with programmable
rounding clearance
Program Function
Subroutine levels, max.
Interrupt routines, max.
Number of levels for skip blocks
Polar Coordinates
Dimensions inch/metric,
changeover manually or via program
Dynamic preprocessing memory FIFO
Look ahead
Absolute/Incremental command
Scaling/Rotation
Read/Write system variables
Block search
Edit background
Processing program number, max.
Using of CF Card, USB
Basic coordinate number, max.
Work coordinate number, max.
Basic/Work coordinate programming change
Scratching function
Global and Local user data (GUD/LUD)
Global program user data
Interactive cycle program
Tool Function
Tool radius compensations
Tool offset selection via T/D numbers
Tools / Cutting edges in tool list
Monitoring Function
Working area limit
Software and Hardware limit
Zero-speed/Clamping monitoring
2D/3D protection zones
Contour monitoring
Compensation
Backlash compensation
Leadscrew error compensation
Measuring system error compensation
Feedforward control (Speed control)
2 axes (X, Z) / 3 axes (X, Z, C)
8 axes (Axes + Spindle)
TFT 10.4" Color (800 x 600)
QWERTY Full Keyboard
1MB, 3MB, 5MB
0% ~ 200%
± 999999999
0% ~ 150%
1000000 ~ 0.0001
4 axes
7
2
2
1
G90 / G91
750
1
100
128 / 256, 256 / 512
Safety Function
Safe torque off (STO)
Safe brake control (SBC)
Safe stop 1 (SS1)
Diagnostic Function
Alarm/Message , Alarm log
PLC status/LAD online display
PLC remote connection (Ethernet)
Protection Function
Emergency Stop
Over Travel
Contour Monitoring
Program Protection
Automation Support Function
Actual velocity display
Tool life management
Work counter/Cycle time
2D simulation
Manual Operation
Manual handle/Jog transfer
Manual measurement of workpiece / tool offset
Automatic tool/Workpiece measurement
Automatic/Program reference approach
Automatic Operation
Program run as using CF card/USB
Program control/modification
Block search
Reposition
Preset (Set actual value)
Data Transmission
Ethernet network
USB memory stick & CF card
Convenience Function
Processing setting
(Coordinate system setting, TMS)
Processing support
(Tool Monitoring, Spindle overload monitoring)
Maintenance
(Turret Guidance, I/O monitoring, Manual)
Management (Soft MCP, M/G code List)
SMART machining
Energy saving function (ECO)
Machine Monitoring System (MMS Lite)
Data Transmission
Ethernet network
USB memory stick & CF card
Language
Standard support language
Option
Maximum skip block number
DRF offset
MDI program save/load
Teach-In mode
3D simulation
(Except for working area/Collision check)
Real time simulation
Interactive program (Shop Turn)
Spline interpolation
Program remote control in network
Language
As time / As amount
Embedded
Chinese Simplified, English, Korean
10
Chinese Traditional, French, German,
Italian, Portuguese, Spanish
Global Network
Head Office & Factory
153, Jeongdong-ro, Seongsan-gu, Changwon-si,
Gyeongsangnam-do, Korea (Zip Code : 642-110)
TEL : +82 55 280 9114 FAX : +82 55 282 9680
HYUNDAI WIA
MACHINE TOOL
Changwon Office
Uiwang Office
HYUNDAI WIA America
Jiangsu HYUNDAI WIA
CHINA Chengdu Office
265, Spring Lake Drive, Itasca, IL, 60143
TEL : +1 201 489 2887
FAX : +1 201 489 2723
Company No.6 Fenghuang Road,
Fenghuang Town, Zhangjjagang City,
Jiangsu province, China
TEL : +86 512 5672 6808
FAX : +86 512 5671 6960
Room 2103, Block A, Times Plaza, No.2
Zongfu Road, Jinjiang District, Chengdu,
China
TEL : +86 28 8665 5550
FAX : +86 28 8666 2985
Shandong HYUNDAI WIA
CHINA Wuhan Office
L.A Office
11155 Knott Ave, STE B/C, Cypress, CA
90630, U.S.A
TEL : +1 714 373 5480
FAX : +1 714 373 5485
America Technical Center
39205 Country Club Drive Suite C-9,
Farmington Hills, MI 48310
TEL : +1 248 324 1056
FAX : +1 248 324 0989
HYUNDAI-KIA EUROPE GmbH
Kaiserleipromenade 5, D-63067
Offenbach, Germany
TEL : +49 69271 472 701
FAX : +49 69271 472 719
Raunheim Service Center
Frankfurter Str. 63, 65479 Raunheim,
Germany
TEL : +49 6142 9256 111 FAX : +49 6142 9256 100
Company No.188 Shanghai Road,
Rizhao City, Shandong Province, China
TEL : +86 633 229 9031/5910
FAX : +86 633 229 9191/9199
China Sales Company
1-3F, Bldg6, No.1535 Hongmei Road,
Xuhui District, Shanghai, China, 200233
TEL : +86 21 6427 9885
FAX : +86 21 3431 0376
CHINA Beiging Office
Room 908, Hyundai Motor Building, No.38
Xiaoyun Road, Chaoyang District, Beijing,
China 100027
TEL : +86 10 8453 9850~2
FAX : +86 10 8453 9853
CHINA Guangzhou Office
Room 609, No.1 Yingbin Building 1#
Yingbin Blvd (Dashi Section) Panyu
District Guangzhou Ctiy, Guangdong,
China 511431
TEL : +86 20 8550 6595~6,
FAX : +86 20 8550 6597
Room 302, B tower, Donghe Center,
Dongfeng three road, Zhuankou,
Wuhan, Hubei, China
TEL : +86 27 5956 3256~7
FAX : +86 27 5952 3258
CHINA Qingdao Office
Room 1207, ZhaoYin Building, 36
HongKong Middle Road, Qingdao 266071,
PR China
TEL : +86 532 8667 9333~5
FAX : +86 532 8667 9338
CHINA SHENYANG Office
Room 1304, NO.53 Beizhan Road, Shenhe
District, Shenyang, China 110013
TEL : +86 24 3228 6640
FAX : +86 24 3228 6642
HYUNDAI WIA INDIA
48, Sur. No78-08. Kandamangalam Village,
Sengadu Post, Sriperumbudur Taluk,
Kancheepuram, Tamilnadu-602 105, India
TEL : +91 44 3717 6333
FAX : +91 44 3717 6363
E160 SERIES
OVERSEAS OFFICES
CnC Turning Center
37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do,
Korea (Zip Code : 437-718)
TEL : +82 31 596 8209 Fax : +82 55 210 9804
32
+
33
205-03 002.002 ENG
Head Office & Factory
Overseas Sales Team
153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do
16F, 37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do
Tel +82 55 280 9206, 9299
Tel +82 31 593 8173
Fax +82 55 210 9804
www.wiamachine.co.kr

HYUNDAI WIA CNC Turning Center

Transcription

Similar documents

HYUNDAI WIA CNC Turning Center

KIT Series

SKT250/300 Series

The Automobile Industry Pocket Guide

CNC Lathe - Make-MT