Untitled - Tommy Docks

WHO WE ARE
Tommy Docks are designed to be the highest quality, most
user-friendly do-it-yourself dock system on the planet. Our
patented hardware design will deliver strength and superior
stability to your dock. Our system is completely modular for
creating a multitude of different dock layout configurations.
Whether you’re looking for a standard dock design or a way to
create an elaborate custom setup of your own invention, the
Tommy Docks system makes doing it yourself easy.
All our neighbors on the lake admire the dock and
can’t get over how easy our dock goes in and out.”
Bruce – Springfield, NY
We offer a variety of dock selections:
CLASSIC • CLASSIC PLUS • PREMIUM • FLOATING • ROLL-IN • BOX KITS
The simplicity of your system is extremely helpful to
us as we have limited resources for the installation of
our pier.”
We also offer an outstanding variety of:
Steven – Mosinee, WI
HARDWARE • FLOATING PARTS • DOCK AND WATER ACCESSORIES
“I purchased lots of hardware and installed the dock.
I found the hardware to be excellent, easy to install
and the directions were easy to read. My experience
with you has been A+++. Thanks for everything.”
TOMMY DOCKS BENEFITS:
Roger – Island Pond, VT
• Easy to set up
18"
ABOVE DECK
• Easy to take down
• Quick interlocking “L Pin” system
• Choice of normal duty or heavy duty systems
• Patented stable load-cradling bracket design
• Less hardware required through superior design
• Exceptionally corrosion-resistant hardware
• Secure safety cap pipe covers
6'
SUPERIOR
PIPE
6" DECK
WATER LEVEL
12"
ABOVE WATER
3'
8'
SUPERIOR
PIPE
48"
WATER DEPTH
4'
12"
EMBEDMENT
1'
• Rustproof stainless steel adjusting bolt and nut assemblies
• No-settle, easy to to remove dome-shape footpads and
muck footpads
• Lighter, stronger, corrosion-resistant pipes
• Complete selection of accessories available
• Construct ATV bridges, lakeside patio decks and nature
walkways over wetland areas with our heavy duty hardware
• Free expert problem-solving consulting
TYPICAL TOMMY DOCKS SETUP
CLASSIC
CEDAR DOCK SECTIONS WITH CEDAR DECKING
# TD-10201 - 4’ x 8’ Cedar frame with cedar decking, assembled
# TD-10200 - 4’ x 10’ Cedar frame , assembled
PREMIUM
ALUMINUM DOCK SECTIONS WITH
ALUMINUM DECKING
# TD-30136 - 4’ x 8’ Aluminum frame with aluminum decking, assembled
# TD-30131 - 4’ x 10’ Aluminum frame with aluminum decking, assembled
• Made from premium quality kiln dried cedar
• 2” x 6” frame with (2) intermediate support braces for added strength
• 5/4 x 6 radius edge
• Non-slip Teflon/polyester powder coating finish
• Decking retains its crisp and clean appearance for the life of the dock
• Stays cool to the touch even in full sun
• Sturdy aluminum alloy frame with (3) 3” wide I (eye) beam center supports
ALUMINUM DOCK SECTIONS WITH
PVC DECKING
CLASSIC PLUS
ALUMINUM DOCK SECTIONS WITH
REMOVABLE CEDAR DECKING
*AZEK AND ALUMINUM OPTIONS NOW AVAILABLE WITH REMOVAL DECK
PANELS FOR EASIER INSTALLATION AND REMOVAL.
# TD-30091 - 4’ x 8’ Aluminum frame with Genova decking, assembled
# TD-30092 - 4’ x 10’ Aluminum frame with Genova decking, assembled
# TD-50008 - 4’X 8’ Aluminum frame with Azek decking, in slate grey &
brownstone, assembled
# TD-50010 - 4’X 10’ Aluminum frame with Azek decking, in slate grey &
# TD-30088 - 4’ x 8’ Aluminum frame with removable cedar decking,
assembled
brownstone, assembled
# TD-30089 - 4’ x 10’ Aluminum framesection with removable cedar
decking, assembled
• Engineered PVC decking is a structural deck board without any foam or wood
• Comfortable and attractive aluminum frame with premium quality radius
• Comfortable slip-resistant surface stays cool to the touch and has no exposed
edge cedar decking
fillers and will not absorb moisture
Genova Decking
fasteners
• Cedar panels are removable for ultra lightweight installation and removal
• Beautiful wood grain finish requires no maintenance
• Sturdy aluminum alloy frame with (3) 3” wide I (eye) beam center supports
• Sturdy aluminum alloy frame with (3) 3” wide I (eye) beam center supports
Slate Grey Azek Decking
Brownstone Azek Decking
DOCK HARDWARE
STATE OF THE ART BRACKETS
• Offered in both normal and heavy duty
• Brackets manufactured using a high-grade powder coating that
prevents weather damage.
A
A
BRACKET
BRACKET
# A-50000
# A-50001
“A” Outside Corner Bracket
“B” Straight Bracket
B
BRACKET
A
C
BRACKET
BRACKET
#A-50002
# A-50031
“C” Inside Corner Bracket
“D” Inside Corner Bracket
(2 way)
(3 way)
SHORE
NORMAL VS HEAVY DUTY BRACKETS
Choose heavy duty if your installation site includes:
• Strong currents or wave action
• Docking larger watercraft
• Heavy boat activity
• Water depth over 6 feet
• Large platform sections at the end of a dock
TOMMY DOCKS SUPERIOR PIPES
# A-50001
# TD-10003
“B” Straight Bracket
“B” Straight Bracket
(Normal Duty)
(Heavy Duty)
Competitor’s Pipe
The supporting leg structure for our docks is manufactured specifically
for Tommy Docks. 40% lighter, 45% stronger and has 50% more corrosion
resistance than ordinary galvanized pipe. We use hi-tensile strength
galvanized steel for superior dock rigidity and finish with a clear acrylic
coating for exceptional corrosion resistance. Our normal duty pipe (used
with normal duty brackets) has an OD of 1.66” and heavy duty pipe (used
with heavy duty brackets) has an OD of 1.90”.
# A-50015
Tommy Docks Pipe
*available in multiple lengths
SAVE MONEY, SPEND FUN.
ROLL-IN DOCK KIT
ROLL-IN DOCK WITH REMOVABLE CEDAR DECKING AND MORE
MORE KITS
PREMIUM QUALITY CEDAR DOCK KIT
# TD-50300 4’ x 20’ Aluminum frame with cedar decking set complete with:
# TD-20777 - 4’ x 8’ cedar dock section with cedar decking
• (2) 4’ X 10’ Aluminum frames
• (1) Roll-in dock kit
• (4) 4’ X 5’ Removable cedar deck sections
• (2) (SR) Heavy duty footpads
• (2) (SR) Heavy duty outside corner brackets
• (2) Special heavy duty straight brackets
• (2) (SR) 4’ Long superior pipes
• (2) (SR) 6’ Long superior pipes
• Clean look of extruded aluminum frame and the warmth of natural cedar decking
• Cedar panels can be stained to your preference of color
• The ultimate in ultra lightweight installation and removal.
• All sections are pre-drilled. Just bolt them together and roll them out.
# TD-20778 - 4’ x 10’ cedar dock section with cedar decking
Kit includes everything you need to assemble (1) 4’ x 8’ or 4’ x 10’ cedar dock section
• Easy to assemble
• Made from premium quality kiln-dried cedar
• (3) 2x6 Cedar stringers and (2) end caps with (2) intermediate support braces
• 5/4x6 radius edge cedar decking
• All boards precision cut to size
• Kit includes fasteners and simple instructions
BOXED ALUMINUM FRAME KIT
# TD-40008 - 4’ X 8’ Aluminum frame
# TD-40010 - 4’ X 10’ Aluminum frame
Kit includes everything you need to assemble (1) 4’ x 8’ or 4’ x 10’ aluminum frame
• (2) End caps
• (2) Side rails
• (1) Center I-beam
• (2) I-Beam crossmembers
• Hardware to assemble
• Simple set of visual instructions
• Structural 6005-T5 Grade Aluminum Framing components with bright mill finish.
SHOREDOCKER DROP-IN BOAT RAMP KIT
# SD-1200 - 1200lbs capacity
# SD-2000 - 2000lbs capacity
The simple and inexpensive way to secure your boat and keep it high and dry and
out of the water. Each kit comes with everything you need to build your own boat
ramp. Just add treated lumber. Comes with an easy to follow set of instructions.
Kit allows for a ramp length up to 20’ long. Additional roller kits available to
extend your ramp up to 32’ long.
• Available in capacaties <1200lbs and <2500lbs.
DOCK FLOATS
TECHSTAR WHEEL FLOATS
On some lakes you just can’t leave your dock in the water over the winter.
Techstar Wheel Floats are the solution! This unique Wheeled Float with its
large 750 pound capacity 24” diameter flotation filled wheel allows you to roll
your large floating dock into and out of the water.
• Wheel extends below the float 10”
• Heavy duty 1-7/8” aluminum axle
• Easy to assemble - (6) mounting holes
# WF-18
• Compatible with both wood and aluminum docks
TechStar Wheel Float
TECHSTAR ALL PURPOSE DOCK FLOATS
Techstar All Purpose Dock Floats offer the maximum in design flexibility and
economy. Each float has (6) molded holes enabling you to lag your floats to
your frame up from the bottom. You can use any size framing lumber 2x6 or
larger. (3) different heights allow you to choose your freeboard.
• Both lumber and hardware stay out of the water
• Less wood required for construction
• Less labor to build your dock
• Polyethylene is environmentally friendly
• Polyethylene is gasoline resistant
• Polyethylene is resistant to aquatic wildlife
# AP-12
# AP-8
24” x 48” x 12” TechStar
24” x 48” x 8” TechStar
All Purpose Float
All Purpose Float
TECHSTAR BUMPER FLOATS
Bumperfloats are a unique combination of dock bumper and flotation.
Designed to run the length of your dock on both sides, these floats will
comfortably float a docks at varying sizes with maximum stability.
• Dock Bumpers are built in as part of the float
• Foam filled with closed cell EPS (Expanded Polystyrene) for added security
• Your wood frame, hardware and decking stay out of the water
• Construction is simple - Build a frame with corner brackets and attach
floats through molded bolt holes [there are (5) holes per float]
• Your new dock will sit low to the water for maximum stability
AFFORDABLE SYSTEMS FOR
YOUR POND OR LAKE!
# BF-12
TechStar Bumper Float
*available in sandstone, black
# BF-1
# BF-2
TechStar Bumper Float
TechStar Bumper Float
*available in sandstone, black
*available in sandstone, black
ACCESSORIES
LADDERS
ALUMINUM LADDERS
# TD-20000
# TD-30063
# TD-20033
# TD-20002
# TD-20240
Plastic Safety Cap
Rubber Safety Cap
18” Pipe Bumper
18” Straight Bumper
Folding Dock Cleat
# TD-20116
# TD-TD-30004
# TD-10098
# CK-10000
# R-1
Dockside Fishing Rod Holder
Support Brace
4’ Cedar Bench
Canoe/Kayak Holder
TechStar Plastic
Brackets
Kayak Rack
# TD-10258
# TD-20258
# TD-30260
# TD-10258
Aluminum Ladder
Aluminum Ladder - Wide
Aluminum Lifting Ladder
Aluminum Lifting Ladder - Wide
*available in 3, 4, or 5 steps
*available in 3, 4, or 5 steps
*available in 4 or 5 steps
*available in 4 or 5 steps
PLASTIC TECHSTAR LADDERS
• Sturdy molded polyethylene
• Non-slip extra wide steps
• Heavy duty handles
• Sandstone color
• Easily bolts to any style dock
# AF-250
# RF-1
# PWC-1
# A-50004
# TD-10085
Techstar Floating
Techstar Raft Float
Techstar Watercraft Float
L-Pin
Auger Wrench
Dock Anchor Mold
# TD-30126
# A-50216
# A-50215
# A-TD-20001
# TD-10072
Male & Female
Eye Bracket
Hook Bracket
48” Styrofoam
Dock Leveling Winch
Floating Dock Hinges
Flotation Log
# DL-5
# DL-4
Techstar Heavy Duty 5 Step Ladder
Techstar Heavy Duty Flip-Up
Dog Friendly
4 Step Ladder
SLIDEMOOR
ISLAND PADS
SLIDING DOCK BRACKETS
FLOATING FUN PADS
• Y & I Beam Brackets both available in 4’ & 8’ - both with the option of 12” for small docks or 18” for commercial sized docks
• Super durable closed foam construction eliminates tearing and ensures the summer fun never ends.
• Made in the USA
# DL-5
# DL-5
Slidemoor I-Beam
Slidemoor I-Beam
FLoating Dock Bracket
FLoating Dock Bracket
# TD-60020
Island Pad 6’ X 15 ‘
2 Ply Floating Pad
FIND MORE PRODUCTS AND
DOCK CONFIGURATIONS
TOMMYDOCKS.COM
OR
866-675-1880
DISTRIBUTED BY: