environmentally conscious oils and fluids

Transcription

environmentally conscious oils and fluids
Environmentally
Conscious
Comprehensive
Hydraulic
Guide
HydraulicOils
Oils
Guide
Presenting our full range of hydraulic oils—the right products
engineered for every application.
ENVIRONMENT
EN VI R O N M E N TA L LY C ON SC IOU S
Protect your equipment and the environment
We’re proud to offer premium lubricants that protect your equipment and meet varying state and federal
regulations with regard to environmental impact. From ashless, chlorine-free additives to inherently and readily
biodegradable hydraulic oils and re-refined oils, Phillips 66® has the lubricants you need to protect your
equipment using an environmentally conscious approach.
Synterra® Hydraulic Fluid
Synthetic Polyol Ester (POE) antiwear hydraulic oil; readily
biodegradable; for industrial and mobile equipment operating in
environmentally sensitive areas
Synterra Hydraulic Fluid is readily biodegradable and is nontoxic to
the environment. It was developed for use in the hydraulic systems of
industrial and mobile equipment operating in environmentally sensitive
areas. It exceeds all requirements for biodegradability as defined by
the EPA 40 CFR Part 792, OECD 301B and USTC PRO-BIO-BP 111-9
test methods. Synterra Hydraulic Fluid is particularly recommended
for use in hydraulic equipment operating in national parks and wildlife
refuges, around lakes and streams, and in other recreational areas.
Synterra Hydraulic Fluid is available in viscosity grades: ISO 32, 46
and 68.
Applications:
• Mobile and stationary equipment operating in environmentally
sensitive areas
• Hydraulic systems on mobile equipment such as dump trucks,
motor graders, cranes, bulldozers and forklifts
• Boat lifts
• Chain drives operating in sensitive areas
• Construction equipment
• Electrical service repair trucks (cherry pickers)
• Farm implements
• Forestry and logging equipment
• Marine and offshore equipment
• Mining equipment
• Pivots in irrigation systems
• Ski lifts
Features/Benefits:
• Nontoxic
• Readily biodegradable
• Reduced environmental impact
• Excellent wear protection for hydraulic pumps and motors
• Protects against rust and corrosion
• Excellent storage stability
• Full-synthetic formulation
Note: For information on compatibility with seals, paints and plastics, please call our
Technical Support Hotline.
Ecoterra® HVI Hydraulic Oil
High-quality, zinc-free high viscosity index antiwear hydraulic oil;
specifically developed for use in off-road equipment operating over
a wide temperature range; inherently biodegradable
Ecoterra HVI Hydraulic Oil (ISO 46) is specifically formulated for use in
the hydraulic systems of off-road equipment manufactured by Hitachi,
John Deere and others operating over a wide temperature range. It
has excellent water-separating properties to minimize the formation of
emulsions and is resistant to excessive foam buildup that can cause
poor or sluggish hydraulic system response. The combination of
high viscosity index and low pour point permits its use over a wider
temperature range than conventional antiwear hydraulic oil. The high
viscosity index helps maintain oil viscosity at operating temperatures
to reduce energy loss caused by internal oil leakage in the hydraulic
system, resulting in higher hydraulic system efficiency. Ecoterra
Hydraulic Oil 46 meets the performance requirements of Hitachi
Advanced Hydraulic Oil, and is fully compatible with the Hitachi fluid
and with Hitachi seals and hoses.
Applications:
• Hitachi excavators with 4,000-hour service intervals
• Hydraulic systems of excavators, backhoes, bulldozers, crawlers,
skid steers, front-end loaders, wheel loaders, motor graders,
compaction equipment and forestry equipment, where the
manufacturer recommends a zinc-free hydraulic fluid
Features/Benefits:
• Zinc-free formulation
• Very high VI to reduce internal oil leakage for higher system
efficiency
• Increased hydraulic system efficiency up to 6% compared to
conventional hydraulic fluids
• Suitable for year-round use
• Excellent wear protection for hydraulic pumps and motors
• Excellent oxidation resistance
• Protects against rust and corrosion
• Excellent water-separating properties
• Improved filterability
• Good foam resistance
• Extended equipment life
Note: Ecoterra Hydraulic Fluid HVI 46 is not compatible with zinc-containing hydraulic
oils and may cause residue, gelling or filter plugging if mixed with such fluids. Mixing
the two products will lessen the environmental advantages normally gained by using
Ecoterra Hydraulic Fluid HVI 46.
Ecoterra® HVI-E Hydraulic Oil
High VI, Zinc-Free Antiwear Hydraulic Oil For Off-Road Equipment;
Emulsifies With Water
Ecoterra HVI-E Hydraulic Oil is a high-quality, high viscosity index,
zinc-free antiwear hydraulic oil developed for use in mobile equipment
operating over a wide temperature range and in wet environments.
It is specially formulated to emulsify readily with water to maintain
effective lubrication in the presence of water. It is particularly
recommended for use in off-road equipment manufactured by
Hitachi, John Deere and others, operating under conditions where
an emulsifiable hydraulic oil is specified or preferred. It is formulated
with an ashless (zinc-free) antiwear additive package to provide
excellent wear protection for hydraulic pumps and motors, and to
protect hydraulic system components against rust and corrosion.
It has excellent oxidation resistance and thermal stability at high
temperatures to minimize deposit formation and provide long service
life. It has a high viscosity index and low pour point for use over a
EN VI R O N M E N TA L LY C ON SC IOU S
wider temperature range than conventional antiwear hydraulic oils. It
also has excellent low-temperature properties for cold start-ups. It is
resistant to excessive foam buildup that can cause poor or sluggish
hydraulic system response. Ecoterra HVI-E Hydraulic Oil meets the
performance requirements of all major hydraulic pump manufacturers,
and is recommended for use in all types of high-pressure, high-speed
hydraulic pumps. It also meets the performance requirements of
Hitachi Advanced Hydraulic Oil where an emulsifiable hydraulic oil
is recommended, and is fully compatible with the Hitachi fluid and
Hitachi seals and hoses.
Applications:
• Hydraulic equipment operating in environmentally sensitive areas
such as national parks, wildlife refuges, ski resorts and other
recreational areas
• Hydraulic equipment in amusement parks and zoos
•O
il drilling rigs and offshore platforms
• Electric motor bearings
• Hydraulic presses, shears, jacks and punches in machine shops
• Service station lifts
•H
ydraulic systems requiring an ashless, zinc-free hydraulic oil
Applications:
• Hitachi excavators with 4,000-hour service intervals
• Off-road mobile construction and forestry equipment, such as
backhoes, bulldozers, crawlers, excavators, skid-steer loaders
and motor graders, where the manufacturer recommends an
emulsifiable ashless, zinc-free hydraulic oil
Features/Benefits:
•N
ontoxic to aquatic organisms
• Inherently biodegradable
• Does not contain zinc or other heavy metals
• Excellent wear protection for hydraulic pumps and motors
• Excellent oxidation resistance and thermal stability
• Protects against rust and corrosion
• Excellent water-separating properties
• Good foam resistance
•L
ower-cost alternative to synthetic biodegradable hydraulic fluids
Ecoterra HVI-E Hydraulic Oil meets the requirements (except
demulsibility) of the following industry and OEM specifications:
• AIST (U.S. Steel) Classification No. 127
• Bosch Rexroth RE 90 220
• Denison Hydraulics HF-0, HF-1, HF-2
• DIN 51524 Part 3, Antiwear Hydraulic Oils, Type HVLP
• German Steel Industry SEB 181222
• Hitachi Advanced Hydraulic Oil
• ISO 11158:1997, Family H (Hydraulic Systems), Type HV
• Vickers (Eaton) M-2950-S, I-286-S
Features/Benefits:
• Zinc-free formulation
• Very high VI to reduce internal oil leakage for higher system
efficiency
• Increased hydraulic system efficiency by up to 6% compared to
conventional hydraulic fluids
• Excellent wear protection for hydraulic pumps and motors
• Excellent oxidation resistance
• Protects against rust and corrosion
• Emulsifies readily with water
• Good filterability
• Good foam resistance
• Suitable for year-round use
Note: Ecoterra Hydraulic Oil is not compatible with zinc-containing hydraulic oils and
may cause residue, gelling or filter plugging if mixed with such fluids. Mixing will lessen
the environmental advantages normally gained by using Ecoterra Hydraulic Oil.
Ecoterra Hydraulic Oil
Nontoxic, zinc-free, inherently biodegradable antiwear hydraulic
fluid in three viscosity grades: ISO 32, 46 and 68
Ecoterra Hydraulic Oil is a high-quality, zinc-free antiwear hydraulic
oil specifically developed for use in industrial and mobile equipment
operating in environmentally sensitive areas. It is specially formulated
for reduced environmental impact in case of leaks or spills. It is
nontoxic to fish and aquatic species as determined by OECD Test
Method 203 1-12, and is classified as inherently biodegradable
by the OECD Test Method 301B. It passes the visual “no sheen”
requirements of the U.S. EPA Static Sheen Test. Ecoterra Hydraulic
Oil is recommended for use in place of conventional zinc-containing
hydraulic oils in applications where there is the possibility of soil or
water contamination. It also may be used as a lower-cost alternative to
synthetic, readily biodegradable hydraulic fluids.
Note: Ecoterra Hydraulic Oil is not compatible with zinc-containing hydraulic oils and
may cause residue, gelling or filter plugging if mixed with such fluids. Mixing will lessen
the environmental advantages normally gained by using Ecoterra Hydraulic Oil.
Firebird AW Hydraulic Oil
Antiwear hydraulic oil formulated with re-refined base stocks;
recommended for all types of high-pressure, high-speed hydraulic
pumps on industrial, mobile and marine equipment
Firebird AW Hydraulic Oil is an environmentally responsible
antiwear hydraulic oil formulated with greater than 50% highquality, re-refined base stocks. It has been specially developed to
lessen the environmental impact of used oil disposal. Available in
viscosity grade ISO 46, it is recommended for use in a wide variety
of industrial, mobile and marine hydraulic system applications
and in all types of high-pressure, high-speed hydraulic pumps.
Firebird AW has good water-separating properties to minimize the
formation of emulsions and is resistant to excessive foam buildup
that can cause poor or sluggish hydraulic system response.
Applications:
•H
ydraulic systems on industrial, mobile and marine equipment
• Automated machine tools
• Hydraulic elevators, hoists, presses and floor jacks
•H
ydraulic systems on mobile construction equipment
• Marine cargo winches and steering systems
• Service station lifts
• Air tools and other pneumatic equipment lubricated through
air line lubricators
• Chain drives
• Moderately
loaded enclosed industrial gearboxes that
do not require an extreme-pressure (EP) gear oil
• Plain and rolling element bearings in electric motors
Features/Benefits:
• Excellent wear protection for hydraulic pumps and motors
• Good oxidation resistance
• Protects against rust and corrosion
• Good water-separating properties
• Good foam resistance
• Lessens the environmental impact of used oil disposal
© 2014 Phillips 66 Company. Phillips 66, Conoco, 76 and their respective logos are registered
trademarks of Phillips 66 Company in the U.S.A. and other countries. T3-TRI-19550_eco