Sony Vaio VGN-S260 RAM Replacement

Sony Vaio VGN-S260 RAM Replacement
Sony Vaio VGN-S260 RAM Replacement
Written By: Jeffrey Bryan
INTRODUCTION
How to get out the RAM of your Sony Vaio VGN-S260
TOOLS:
Phillips #00 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
Sony Vaio VGN-S260 RAM Replacement
Step 1 — Battery

Flip the laptop over so the Vaio logo is facing down

Locate the battery at the top and Find the release and unlock slides on the battery

Slide the unlock tab to the unlock position

Slide the release tab in the direction of the arrow, i.e. towards the unlock tab
Step 2

With the tabs still in the unlock position, slide the battery away from the main case.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
Sony Vaio VGN-S260 RAM Replacement
Step 3 — RAM

With the laptop still flipped over with the Vaio logo facedown, locate the screws for the RAM

Remove the screws
Step 4
© iFixit — CC BY-NC-SA
www.iFixit.com

Lift off the unscrewed cover

Locate the RAM
Page 3 of 4
Sony Vaio VGN-S260 RAM Replacement
Step 5

Locate tabs next to RAM

Pull the 2 tabs away from the RAM

The RAM should pop up.
Step 6

Gently slide the RAM up and out
To reassemble your device, follow these instructions in reverse order.
This document was last generated on 2016-10-31 08:45:45 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4