learn more - Picou Builders Supply Co

INFINITY FIBERGLASS & STEEL
ENTRY DOOR SYSTEMS
2008
BARNETT MILLWORKS, INC. | INTRODUCTION
COMMITTED TO QUALITY
Entry System Glossary of Terms
Adjustable Threshold: threshold that can be adjusted up
and down to ensure a tight seal with the door panel. Creates a
customized fit for changing weather conditions, i.e. humidity,
cold dry air, etc.
Brickmould: decorative molding surrounding the exterior of the
door frame.
Caming: metal separator that holds individual pieces of
decorative glass in place. Caming is offered in Brass, Dark Patina,
Nickel and Satin Nickel. See caming offered for the glass
collections shown in this brochure.
Door Panel: the actual door itself. In combination with the
frame, creates the entryway for your home.
Frame: the outside edge of the door unit surrounding the door
panel. Composed of the jambs, head and sill; the frame creates the
boundary of the door and works with the door panel to ensure a
tight, weatherproofed home.
Glazing: the glass system used in the door.
Handing: describes direction door opens and placement of the
handle. When standing outside, look at the closed door.
If door swings in:
Handle on right = left hand door
Handle on left = right hand door
If door swings out:
Handle on right = right hand door
Handle on left = left hand door
Head: horizontal piece forming the top of the door frame.
Hinges: metal plates and pins that allow the door to swing out
or in.
Jamb: an upright piece forming the side of the door frame. As an
integral part of the frame, the jamb works to ensure a tight fit for
the door in your home.
A well designed entryway creates a focal point for your home. Barnett Millworks
offers a wide variety of beautiful entryways consisting of door and sidelite panels
Mull Post: structural post between the sidelite and the door.
Provides structural integrity to the door unit.
with matching transoms.
Rails: horizontal areas on the door panel above and below the
glass or embossing.
Our goal is to supply you with a long lasting, energy efficient entryway that will
Sidelite: glass decorative accessory placed next to a door for
ornamentation and to allow light to pass through.
offer years of service. We offer a wide selection of fiberglass and steel door styles.
When paired with one of our fourteen families of decorative glass, you have the
beautiful entryway you pictured to compliment your home.
Our pledge is to have the selections pictured in this brochure available in a timely
manner. We have carefully chosen the decorative products to offer a wide range of
styles to fit every taste and budget. We have also committed inventory levels of these
products to position ourselves to fulfill your needs. Your selection of a Barnett
Millworks product will provide you with years of service.
Sill: the bottom composite member of the door frame. Composed
of two pieces: the threshold and the subsill. Works to keep weather
(air and water) infiltration to a minimum.
Strikeplate: protects the jamb from the hardware latch. Covers
the latch and deadbolt.
Sweep: the weather seal on the bottom of the door panel that
makes contact with the threshold.
Swing-in: describes a door system which opens inward toward
the home when in operation.
Swing-out: describes a door system which opens outward, away
from the home when in operation.
Threshold: the bottom part of the door frame, i.e. the area you
step on when entering or exiting through the doorway.
Transom: decorative glass piece placed above the door to accent
the style and appearance of the door.
Weatherstripping: flexible material surrounding door panel
to protect your home from air infiltration. Should be tight enough
to create a seal when the door is closed.
2
BARNETT MILLWORKS, INC. | INTRODUCTION
TABLE OF CONTENTS
Table of Contents
Fiberglass & Steel Doors Specifications . . . . . 4-5
Making a dramatic first impression, the front entrance both personalizes
Architectural Elements™
◆Amulet . . . . . . . . . . . . . . . . . . . . . . . . 7
and adds curb appeal to the home. It is an expression of distinction as
unique as the owners within.
Architectural Elements™
◆Lotus . . . . . . . . . . .8
◆◆◆Paris. . . . . . . . . . . . . . . . . 9
◆◆◆◆Cadence .10-11
◆◆◆Expressions. . . . . . . 12-13
◆◆◆Jacinto . . . . . .14
◆◆◆Monterey . . . . . . . . . . . 15
◆◆◆◆Radiant Hues16
◆◆◆Oak Park . . . . . . . . . . . 17
◆◆◆◆Heirlooms18-19
◆◆◆◆Nouveau . . . . . . . 20-21
◆◆◆Majestic . .22-23
◆◆◆Quiet Elegance. . . . . . 24
Texture & Privacy
A wide selection of textured glass adds dimension, depth, and contrast to our
designs. We give each design a privacy rating from 1 to 10 to help you choose
the level of openness or obscurity you prefer.
◆◆◆Simulated Divided Light . . . . . . . . . . . . . . . . 25
◆◆Severe Weather® Doorglass . . . . . . . . . . . . . . . . 26
Decorative Privacy Windows . . . . . . . . . . . . . . . . . . 27
◆◆◆Internal Muntins & Doorglass Blinds . . . . 28-29
◆◆◆External Grid & One-lite Doorglass . . . . . 30-31
Finishing Instructions . . . . . . . . . . . . . . . . . . . . 32-33
Fiberglass/Steel Door Information . . . . . . . . . . 34-35
Availablity Color Key
◆ = steel
◆ = fiberglass textured
Handcrafted Glass
The beauty of handcrafted glass is that every piece is different –slight bubbles,
lines, and surface imperfections are all characteristics of glass and are not to be
considered as defects.
3
◆ = fiberglass smooth
◆ = fiberglass textured mahogany
BARNETT MILLWORKS, INC. | INTRODUCTION » FIBERGLASS DOORS
FIBERGLASS DOORS
Fiberglass door construction combines the perfect blend of beauty, style, comfort, and value. Take a
closer look at the quality features found in Barnett Millworks fiberglass door systems.
INFINITY FIBERGLASS
FEATURE BENEFITS
(Textured Wood Grain or White Smooth Skin)
• Composite Stiles
• Engineered Composite
Top & Bottom Rails
• Fiberglass Skin
• Polyurethane Core
• No Rot and No Rust
• No Exposed Wood
Full-length Composite Stiles
will not rot, dent or splinter.
High-strength Engineered
Composite Rails will not
rot, chip or splinter.
Together, the stiles and rails
form a rot free watertight
edge around the perimeter
of the panel.
Many brands have a wood edge which
is likely to rot.
20" EXTENDED LOCKBLOCK
Our 20" extended lockblock allows a full range of door hardware to be installed.
TEXTURED WOOD GRAIN DOORS
Simulated oak grain follows stile and rail pattern
Deeply embossed panels
Deep profile compression molded skins accept a wide variety of stain colors or paint
Wide selection of doorlites are available through Barnett Millworks
Backed by a limited lifetime warranty
WHY USE AN INFINITY
FIBERGLASS DOOR?
SMOOTH SKIN DOORS
No Exposed
Pre-pigmented white skin is ready to paint
- which is possible on wood edge doors.
Deeply embossed panels
No Rot
Wide selection of doorlites are available through Barnett Millworks
No Rust
Factory “flush glazed” panels are available in one-lite and 15-lite GBG
Six times the energy efficiency of wood.
Backed by a 25-year warranty
4
wood edges as on many brands of
fiberglass and steel.
- steel doors rust if not maintained.
Best warranty in the industry.
BARNETT MILLWORKS, INC. | INTRODUCTION » STEEL DOORS
STEEL DOORS
Infinity Steel Doors offer durability, performance and value. Please note the features found in
Infinity Steel Doors and the benefits that come from choosing them for your entrances.
INFINITY STEEL FEATURE
BENEFITS
Designed to go far beyond mere beauty to
enhance the appearance and value of the home,
they also recognize the need for durability,
added security and efficient energy conservation.
Carefully selected materials are combined with
advanced construction techniques to bring you
all of these advantages.
Factory primed paint offers long life
and protection against the elements.
Galvanized steel skins
for corrosion resistance.
Deeply embossed panels offer
style and selection.
Wood lock block 3 5/16” x 18” allows
hardware to be secured to door panel
and adds security.
Thermal barrier eliminates
cold transfer between exterior
and interior skins.
Foam-filled core is CFC-free and has a
higher soundproofing and insulation
value than wood.
1 YEAR LIMITED PANEL WARRANTY
5
BARNETT MILLWORKS, INC. | ARCHITECTURAL ELEMENTS™
ARCHITECTURAL ELEMENTS™
ARCHITECTURAL
ELEMENTS™
Fluted Series
Beautiful doorglass designs enhanced by generous
fluted mouldings and lovely corner medallions.
The Architectural Elements™ Fluted Series,
brings a finished appearance to the interior and
exterior of the home.
• Coordinating optional medallions to match caming
• Coordinating plants in 3/4 light sizes
• No screw hole plugs. No caulking squeeze out
• Ready to stain or paint
• Will not warp or split
• 20-Year glass seal warranty
• 2-3/8" Backset required
• 3'0" Textured Fiberglass Doors only
◆L O T U S
door 477-LO • sidelights 539-LO
PRIVACY RATING 9
Patina Medallion
6
◆A M U L E T
door 478-AM • sidelights 539-AM
PRIVACY RATING 8
Satin Nickel Medallion
Availablity Color Key
◆ = fiberglass textured
BARNETT MILLWORKS, INC. | ARCHITECTURAL ELEMENTS™ » AMULET
PRIVACY RATING 8
AMULET
◆ door 478-AM • ◆ sidelights 539-AM
transom 332-AM
◆A M U L E T
door 478-AM • sidelights 539-AM • transom 332-AM
PRIVACY RATING 8
patina caming
clear bevels
hammered glass
chinchilla glass
◆ door 477-AM 3/4 plant
◆ sidelights 539-AM • transom 332-AM
Availablity Color Key
◆ = fiberglass textured
patina
7
BARNETT MILLWORKS, INC. | ARCHITECTURAL ELEMENTS™ » LOTUS
LOTUS
PRIVACY RATING 9
clear jewels and criss-cross glass
◆L O T U S
door 477-LO • sidelights 539-LO
transom 378-LO
PRIVACY RATING 9
clear bevels
clear jewels
criss-cross glass
satin nickel
satin nickel
8
◆ door 477-LO 3/4 plant
◆ sidelights 539-LO • transom 378-LO
BARNETT MILLWORKS, INC. | DECORATIVE GLASS » PARIS
PRIVACY RATING 6
PARIS
◆ door 686-PS • ◆ sidelights 694-PS
◆◆◆PA R I S
transom 321-PS
8’0” entrance door
door 686-PS • sidelights 694-PS • transom 321-PS
Reflecting a state of contemplation, serenity and repose
PRIVACY RATING 6
patina caming
clear bevels
arctic glass
clear renaissance
glass
patina
◆◆◆ door 607-PS • ◆◆◆ sidelight 422-PS
Availablity Color Key
◆ = steel
◆ door 814-PS
◆ = fiberglass textured
◆ = fiberglass smooth
9
BARNETT MILLWORKS, INC. | DECORATIVE GLASS » CADENCE
CADENCE
PRIVACY RATING 6
◆◆◆ door 607-CD • ◆◆◆ sidelights 422-CD
◆◆◆ door 919-CD • ◆◆◆ sidelights 694-CD
transom 332-CD
Patterns of light in perfect rhythm.
PRIVACY RATING 6
vertigo glass
ripple glass
patina caming
clear bevel cluster
patina
10
BARNETT MILLWORKS, INC. | DECORATIVE GLASS » CADENCE
◆ door 686-CD • ◆ sidelights 694-CD
◆◆◆C A D E N C E
transom 332-CD
8’0” entrance door
door 686-CD • sidelight 694-CD
decorative privacy window 531-CD
◆ door 949-CD
Availablity Color Key
◆ = steel
◆ = fiberglass textured
◆ = fiberglass smooth
◆ = fiberglass textured mahogany
◆◆ door 949-CD
◆◆ sidelight 694-CD
11
BARNETT MILLWORKS, INC. | DECORATIVE GLASS » EXPRESSIONS
EXPRESSIONS
PRIVACY RATING 6
◆◆◆ door 919-EX • ◆◆◆ sidelights 694-EX
◆◆◆ door 686-EX • ◆◆◆ sidelights 694-EX
transom 321-EX
transom 316-EX
Combining the patterns of the past with the fashion of the future.
PRIVACY RATING 6
clear bevel cluster
granite glass
brass caming
gray renaissance glass
brass (special order)
nickel
12
decorative privacy window 531-EX
BARNETT MILLWORKS, INC. | DECORATIVE GLASS » EXPRESSIONS
CADENCE
◆◆◆ door 612-EX • ◆◆◆ sidelights 493-EX
Transom 332-EX 8’0” entrance door
◆◆◆E X P R E S S I O N S
◆◆◆ door 607-EX • ◆◆◆ sidelights 422-EX
Availablity Color Key
◆ = steel
◆ = fiberglass textured
door 686-EX • sidelights 694-EX • Transom 316-EX
◆◆◆ double door 686-EX
◆ = fiberglass smooth
13
BARNETT MILLWORKS, INC. | DECORATIVE GLASS » JACINTO
JACINTO
PRIVACY RATING 8
◆◆◆ door 686/687-JA • ◆◆◆ sidelights 694-JA
◆◆◆J A C I N T O
door 686-JA • sidelights 694-JA
Old
world
Patterns
of style
light in perfect rhythm.
PRIVACY RATING 8
wrought iron
arctic glass
wrought
iron
14
◆◆◆ door 607-JA • ◆◆◆ sidelights 422-JA
◆◆◆ door 612-JA • ◆◆◆ sidelights 493-JA
transom 321-JA
8’0” entrance door
BARNETT MILLWORKS, INC. | DECORATIVE GLASS » MONTEREY
PRIVACY RATING 8
MONTEREY
◆◆◆ door 686-MO • ◆◆◆ sidelights 694-MO
transom 321-MO
◆◆◆M O N T E R E Y
door 686-MO
Creating a sanctuary in style
PRIVACY RATING 8
satin nickel
clear bevels
criss-cross glass
clear jewels glass
satin
nickel
◆◆◆ door 607-MO • ◆◆◆ sidelights 422-MO
Availablity Color Key
◆ = steel
◆ = fiberglass textured
15
◆ = fiberglass smooth
BARNETT MILLWORKS, INC. | DECORATIVE GLASS » RADIANT HUES
RADIANT HUES
PRIVACY RATING 6
◆◆◆ door 686-RA • ◆◆◆ sidelights 694-RA
◆◆◆ door 607-RA • ◆◆◆ sidelights 422-RA
transom 321-RA
transom 321-RA
Welcoming
formsincatch
the rhythm.
light.
Patterns of light
perfect
PRIVACY RATING 6
gray renaissance
glass
clear bevels
clear renaissance
glass
nickel
16
◆ door 949-RA
◆◆ door 949-RA
BARNETT MILLWORKS, INC. | DECORATIVE GLASS » OAK PARK
PRIVACY RATING 5
OAK PARK
◆◆◆ door 686-KP • ◆◆◆ sidelights 694-KP
transom 321-KP
◆◆◆O A K PA R K
door 686-KP • sidelight 694-KP
An inspired mixture of architecture and light.
PRIVACY RATING 6
crinkle glass
thin reed glass
clear bevels
seedy glass
patina
◆ door 814-KP
Availablity Color Key
◆ = steel
◆◆◆ door 607-KP • ◆◆◆ sidelight 422-KP
◆ = fiberglass textured
◆ = fiberglass smooth
◆ = fiberglass textured mahogany
17
BARNETT MILLWORKS, INC. | DECORATIVE GLASS » HEIRLOOMS
CADENCE
HEIRLOOMS
◆◆ door 949-HM • ◆◆ sidelight 694-HM
PRIVACY RATING 6
◆◆◆ door 607-HM • ◆◆◆ sidelights 422-HM
◆ door 949-HM
transom 321-HM
C A D E N C E door 949-CD • sidelights 694-CD
A rich expression of a tranquil past.
PRIVACY RATING 6
granite glass
glue chip glass
satin nickel caming
clear bevel cluster
brass
nickel
18
◆ door 686-HM • ◆ sidelight 694-HM
8’0” entrance door
BARNETT MILLWORKS, INC. | DECORATIVE GLASS » HEIRLOOMS
CADENCE
◆◆◆ door 612-HM • ◆◆◆ sidelights 493-HM
8’0” entrance door (satin nickel caming only)
◆◆◆H E I R L O O M S
door 607-HM • sidelights 422-HM
decorative privacy window 531-HM
◆◆◆ door 686-HM • transom 317-HM
Availablity Color Key
◆ = steel
◆ = fiberglass textured
◆◆◆ door 684-HM • ◆◆◆ sidelights 692-HM
◆ = fiberglass smooth
◆ = fiberglass textured mahogany
transom 378-HM
19
BARNETT MILLWORKS, INC. | DECORATIVE GLASS » NOUVEAU
NOUVEAU
PRIVACY RATING 6
◆◆◆ door 607-MN • ◆◆◆ sidelights 422-MN
◆◆◆ door 919-MN • ◆◆◆ sidelights 694-MN
transom 321-MN
transom 378-MN
An old world design with a timeless ambiance.
PRIVACY RATING 6
clear bevels
glue chip glass
clear cluster bevels
patina
nickel
20
brass
◆◆◆ door 659-MN
BARNETT MILLWORKS, INC. | DECORATIVE GLASS » NOUVEAU
◆◆ door 949-MN • ◆◆ sidelight 694-MN
◆◆◆N O U V E A U
◆ door 949-MN • ◆ sidelights 694-MN
Availablity Color Key
◆ = steel
◆ = fiberglass textured
door 686-MN • sidelights 694-MN • transom 321-MN
◆◆◆ door 684-MN • ◆◆◆ sidelights 692-MN
◆ = fiberglass smooth
◆ = fiberglass textured mahogany
21
BARNETT MILLWORKS, INC. | DECORATIVE GLASS » MAJESTIC
MAJESTIC
PRIVACY RATING 8
◆◆◆ door 686-ME • ◆◆◆ sidelights 694-ME
◆◆◆M A J E S T I C
door 686-ME • sidelights 694-ME
Relaxed sophistication at its finest.
PRIVACY RATING 8
gray soft wave glass
glue chip glass
glue chip bevels
patina
nickel
brass
22
◆ door 686-ME • ◆ sidelight 694-ME
8’0” entrance door
BARNETT MILLWORKS, INC. | DECORATIVE GLASS » MAJESTIC
◆◆◆ door 684-ME • ◆◆◆ sidelights 692-ME
transom 321-ME
◆◆◆M A J E S T I C
door 686-ME
sidelights 694-ME
◆◆◆ double door 686-ME
Availablity Color Key
◆ = steel
◆ = fiberglass textured
◆ = fiberglass smooth
◆◆◆M A J E S T I C
door 686-ME • sidelights 694-ME
23
BARNETT MILLWORKS, INC. | DECORATIVE GLASS » QUIET ELEGANCE
QUIET ELEGANCE
◆◆◆Q U I E T E L E G A N C E
PRIVACY RATING 7
◆◆◆ door 919-QE
◆◆◆ sidelights 694-QE
◆ door 686-QE • ◆ sidelight 694-QE
8’0” door
door 686-QE • sidelights 694-QE
A glimpse of clarity through subtle silhouettes.
PRIVACY RATING 7
light silkscreen
clear glass
24
◆◆◆ door 686-QE
Availablity Color Key
◆◆◆ door 684-QE • ◆◆◆ sidelight 692-QE
◆ = steel
◆ = fiberglass textured
◆ = fiberglass smooth
BARNETT MILLWORKS, INC. | SIMULATED DIVIDED LIGHT
PRIVACY RATING 1
SIMULATED DIVIDED LIGHT
All Lights Insulated -
NEW Craftsman
Simulated Divided Light
Low “E” I.G.
Craftsman Style
◆ Craftsman Door 817-CL
◆ Craftsman door 818-CL
3-light
6-light
◆S i m u l a t e d D i v i d e d L i g h t
Craftsman door 818-CL 6-Light
NEW Simulated Divided Light
Low “E” I.G. Traditional Style
◆◆◆ 606-CL 4-light
◆◆◆ 406-CL 2-light
◆◆◆ 646-CL 6-light
◆◆◆ 446-CL 3-light
◆◆◆ 679-CL 8-light
◆◆◆ 479-CL 4-light
◆ 679-CL 8-light
◆ 479-CL 4-light
8’0” door
Availablity Color Key
◆ = steel
◆ = fiberglass textured
◆ = fiberglass smooth
25
BARNETT MILLWORKS, INC. | DECORATIVE GLASS » SEVERE WEATHER® DOORGLASS
SEVERE WEATHER® DOORGLASS
Severe Weather®
Doorglass
meets HVHZ and
D.O.D. standards.
Patented Frame
Severe Weather Doorglass is
certified for use in a range
of entrance systems to meet
Florida and Texas windborne requirements in areas
where wind speeds can
exceed 120mph. Meets
DP±65 wind and missile
impact code requirements.
It also meets HVHZ and
Department of Defense
minimum anti-terrorist blast
standards.
HURRICANE FRAME WITH
CLEAR GLASS
• STURDY ALUMINUM
CONSTRUCTION
• MAINTENANCE-FREE
NEW Frame Design
NEW Paint or Stain
Textured Interior Frame
POWDER COAT FINISH
Must past a 50,000 slam cycle test. Blinds
are tested for 10,000 operating cycles.
U.S. Patent #5636484
Blinds
Clear Glass
raise/lower & tilt
Safe and sound.
• No dangling cords
or tilt wands
• No swinging
blinds
• All-in-one side
control - raises,
lowers & tilts all
within reach
• Blinds tilt a
full 180º
• Increased energy
efficiency
• 20 Year warranty
◆◆ Door 686/687-RLB
◆◆ Door 686/687-CL
8'0" Door
◆◆ 612/496-RBL
Expressions
Majestic
Privacy rating 6
Privacy rating 8
Clear Bevels
Glue Chip Glass
Granite Glass
Glue Chip Bevels
Gray Renaissance Glass
Gray Soft Wave Glass
◆◆ 8'0" Door 612/496-CL
nickel
satin
nickel
◆◆ Door 686-EX
◆◆ 8'0" Door 612-EX
◆◆ Door 686-ME
◆◆ 8'0" Door 612-ME
26
Availablity Color Key
◆ = fiberglass textured
◆ = fiberglass smooth
BARNETT MILLWORKS, INC. | DECORATIVE PRIVACY WINDOWS
DECORATIVE PRIVACY WINDOWS
Decorative Privacy Windows
High Obscurity Levels for Privacy.
Our decorative privacy windows let you create private spaces of beauty in
unique places throughout the home. An added layer of obscurity brings in
natural light but blocks the view in–making these windows ideal for baths,
bedrooms, and other areas where you seek natural light, but want privacy.
CADENCE decorative privacy window 531-CD
Expressions | 531-EX
Satin Nickel
HEIRLOOMS decorative privacy window 531-HM
Heirlooms | 531-HM
Satin Nickel
Cadence | 531-CD
Patina
27
BARNETT MILLWORKS, INC. | WIDE BAR INTERNAL MUNTINS
WIDE BAR INTERNAL MUNTINS
◆◆◆ W i d e B a r I n t e r n a l M u n t i n s
686-WM 8-light
PRIVACY RATING 1
Wide Bar
Internal Muntins
7/8" Muntin Bar | Available in Tan or White
◆◆◆ 684/672-WM 9-light
◆◆◆ 692-WM 3-light
◆◆◆ 686/687-WM15-light
◆◆◆ 694-WM 5-light
Internal Muntin Blinds
11/16” Contoured Muntin
◆◆◆ 607-WM 4-light
◆◆◆ 422-WM 2-light
◆◆◆ 686-WM 8-light
◆◆◆ 612/496-WM 18-light
◆◆◆ 493-WM 6-light
◆ 686-WM 15-light
◆ 694-WM 5-light
8'0" Door
8'0" Door
◆◆◆ 686/687/624-WM
10-light
◆ 686-WM 8-light
8'0" Door
Low “E” I.G.
Raise/Lower & Tilt | privacy rating 1/5/10
Available in White Only
• Meets ADA requirements for
accessible forward reach.
• Can paint or stain over
pushpad controls.
• Cycle tested to ensure
trouble-free operation.
• Triple glazed design improves
energy efficiency.
PATENT PENDING
◆◆◆ 684-IM-BLD
◆◆◆ 686-IM-BLD
9-light
15-light
28
Availablity Color Key
◆ = steel
◆ = fiberglass textured
◆ = fiberglass smooth
BARNETT MILLWORKS, INC. | DOORGLASS BLINDS
DOORGLASS BLINDS
Doorglass Blinds
◆◆◆ Full Raise & Lower Blind
Raise/Lower & Tilt | privacy rating 1/5/10
U.S. Patent No. 6,601,633
Fingertip tilt
control
LightTouch® control
raises and lowers the
blind with 4 pounds of
force on the 64" size.
No Dusting Blinds are
sealed between
tempered safety glass.
*Models 684, 672, 686, 687 have separate controls
for the tilt and raise/lower functions.
◆◆◆ 684/672-RBL ◆◆◆ 607-RBL
◆◆◆ 686/687/624-RBL* ◆◆◆ 612/496-RBL
◆◆◆ 694-tilt only
8'0"Door
Motorized Raise & Lower Blinds
Low “E” I.G.
Raise/Lower & Tilt | privacy rating 1/5/10
• Meets ADA requirements for accessible forward reach.
Doorglass blinds are sealed
between tempered safety
glass for longer life and
better insulation.
• Can paint or stain over pushpad controls.
• Cycle tested to ensure trouble-free operation.
PATENT PENDING
◆◆◆ 686-MRBL
◆◆◆ 684-MRBL
Raise & tilt at the touch
of a button.
Operates on four
“C” batteries.
◆ 686-MRBL
8'0"Door
29
Availablity Color Key
◆ = steel
◆ = fiberglass textured
◆ = fiberglass smooth
BARNETT MILLWORKS, INC. | CLASSIC SERIES
EXTERNAL GRID & ONE-LITE DOORGLASS
◆◆◆ 660-CL
◆◆◆ 692-CL
◆◆◆ 684/672-CL
◆◆◆ 684/672-CL-GY
◆◆◆ 681/670-CL *
◆◆◆ 693-CL
◆◆◆ 607-CL
◆◆◆ 799/199-CL
Vent
◆◆◆ 680-CL
clear glass
30
◆◆◆ 447-CL
◆◆◆ 443-CL
◆◆◆ 444-CL
◆◆◆ 442-CL
BARNETT MILLWORKS, INC. | CLASSIC SERIES
Let the sun shine in.
◆◆◆ 919-CL
◆◆◆ 628/627/623-CL
◆◆◆ 686/687/624-CL
◆◆◆ 686/687-CL-GY
◆◆◆ 686/687-CL-LE
◆◆◆ 689/688-CL
◆◆◆ 689/688-CL-LE
8’ Entrance
Doors
◆◆◆ 612/496-CL
◆◆◆ 612/496-CL-GY
◆◆◆ 614/643-CL
◆ 688-CL
◆ 628-CL
Sidelights
◆◆◆
◆◆◆
◆◆◆
◆◆◆
◆◆◆
◆◆◆
◆◆◆
◆◆◆
692-CL
693-CL
*
422-CL
462-CL
694-CL*
695-CL
*
493-CL
8' Sidelight
474-CL
8' Sidelight
31
Availablity Color Key
◆ = steel
◆ = fiberglass textured
◆ = fiberglass smooth
BARNETT MILLWORKS, INC. | FINISHING INSTRUCTIONS » TEXTURED FIBERGLASS DOORS
FINISHING INSTRUCTIONS
STAINING GUIDE FOR TEXTURED FIBERGLASS
Step1. Materials needed:
A lint free cloth, Mineral spirits, Rubber gloves, Masking tape, 2”
thistle brush, Gel stain such as ZAR Stain, Wood Kote® Jel’d
Stain, Minwax® Gel Stain, etc.
Step 2. Surface Preparation:
Do Not Sand Fiberglass
1-Lay door horizontally on saw horses or a table
2-Remove all the hardware and mask off anything you don’t
want stained, such as the glass insert
3-Wipe the door with mineral spirits to clean; allow mineral
spirits to dry from the surface before applying stain.
Step 3. Stain Application:
First Coat
1-Stain one panel at a time. Starting with the center panel,
apply a thin, even amount of stain with a lint free cloth. Using a
light circular motion, work the stain into the embossed grain. 2Then, with a CLEAN RAG, remove all excess finish using long
strokes in the direction of the grain. WORK QUICKLY. 3- If lap
marks appear, immediately apply more stain to dissolve them,
working the area to an even color. This coat will primarily leave
the stain in the grain pattern.
Second Coat
Allow the door to dry for at least 24 hours between coats.
1-Work on one section of the door at a time. 2- Using a soft, lintfree cloth, apply a liberal coat of stain. 3- Working quickly while
the stain is wet, use a clean and dry 2” bristle brush to remove
the excess stain and create a uniform look. 4-Make long, quick
brush strokes in the direction of the grain. 5-Be sure to remove
any excess stain as it accumulates on the brush strokes in the
direction of the grain. 6- If only the exterior face of the door is to
be stained, stain only the hinged edge of the door. If both sides of
the door are to be stained, stain both edges.
Step 4. Protective Top Coat:
1- Apply a polyurethane top coat with UV inhibitors, such as
ZAR Exterior Polyurethane, Wood Kote® flagship UV, or
Minwax® Fast Drying Polyurethane for exterior applications.
2- After stain has completely dried (24 hours) mix topcoat well
and apply evenly, using a clean, dry 2” bristle brush to work
topcoat into corners. 3-Apply two or three coats of finish,
allowing at least 24 hours of drying time between each
application.
PAINTING GUIDE FOR SMOOTH OR
TEXTURED FIBERGLASS
Step 1. Materials needed:
A lint free cloth, Mineral Spirits, Rubber gloves, masking tape, 4” bristle brush,
for acrylic based application: Acrylic based primer/acrylic, for oil-based
application: Alkyd-based, primer/oil based exterior grade paint.
Step 2. Surface Preparation:
DO NOT SAND FIBERGLASS
1-Lay door horizontally on saw horses or table.
2-Remove all the hardware and mask off anything you don’t want painted, such as
the glass insert.
3-Wipe the door with mineral spirits to clean any dust or residue from the surface.
Allow all mineral spirits to dry from the surface before applying paint.
4-Prime the door by applying the primer with a 4” brush in the direction of the
wood grain. Follow the manufacturer’s manuals of drying time.
5-The primer must be completely dry before applying any finish topcoat.
6-All edges should be painted.
Step 3. Painting:
1-Apply exterior grade paint with a 4” brush in the direction of the grain.
2-All door panels, stiles, and rails need to be painted. If applying a second coat,
follow the manufacturer’s direction for drying time between coats.
32
Normal Maintenace:
Even a well-finished exterior fiberglass door will
be affected by exposure and weather.
Direct sunlight will deteriorate the top/finish
coat. Normal maintenance is to re-apply the top
coat at least every two years.
BARNETT MILLWORKS, INC. | FINISHING INSTRUCTIONS » STEEL DOORS
FINISHING INSTRUCTIONS
PAINTING GUIDE FOR STEEL
Painting Instructions
Steel door panels and wood frames MUST be finished or painted after installation. Paint as soon as possible after installation.
Select the proper paint- A high quality, solvent-based or acrylic-based latex paint is recommended. Use a flat or satin finish for best results.
Step 1. Fill installation nail holes with caulk or wood filler. Repair any dents or scratches. Sand the filled and repaired surfaces smooth.
Step 2. Caulk between brickmould and exterior siding (if necessary). Also, run a small bead of caulk between the brickmould and the frame
jamb. Allow the caulk to dry completely.
Step 3. Thoroughly clean all surfaces before painting. Apply paint following paint manufacturer’s recommendations (two coats minimum).
Do not paint weatherstripping or bottom sweep-they must remain soft and flexible.
*all edges must be painted.
INSTALLATION GUIDE FOR
FIBERGLASS & STEEL
DOORS IN WOOD FRAMES
1. Center the unit in the rough opening with the
sill sitting in a bed of caulk. Plumb the hinge
side and temporarily tack the hinge side
brickmould to hold the unit in place.
2. Install wood shims between the door jamb
and stud at each hinge. Plumb the unit and nail
though the jamb and shim into the stud using a
#16 galvanized finish nail or equal.
3. Adjust the lock side to ensure even margins.
Place shims at positions to approximate hinge
side locations, check for plumb and square and
nail securely.
4. Complete the nailing of brickmould.
5. Install (2) long wood screws in the top hinge,
anchoring into the stud.*Please note that units
installed by nailing only through the brickmould
are installed improperly and will result in
operating problems.
FIBERGLASS & STEEL DOOR INFORMATION
Jambs: Our standard jamb is 4 9⁄16 primed pine.
Options - *sizes up to 9 5/8 are available, call if you require a larger size.
• Clear pine
• Mahogany veneered
• “Infiniwood” - pressure treated pine
• “Infinity Ultra” - a composite material prefinished white; see catalog
for sizes.
Face: Our standard face is white “excel”, a PVC rot-free brickmould.
Options • Clear pine
• Mahogany veneered
• 5⁄4 x 3 primed pine.
Sills: Our standard sill is a 4 9⁄16 swing-in adjustable mill finish and a swing-out
mill finish bumper. Extenders are applied to sills larger than 4 9⁄16.
Options - *Bronze or goldtone w/vinyl covers
• Lo-profile ADA handicap mill finish in swing-in or swing-out.
• Fixed swing-in mill finish
• Sill covers available on MF at an up-charge
Other information:
• Standard deadbolt bore is 5 1⁄2” on center with 2 3⁄8 backset
• Standard on swing-out units is 1 NRP hinge
• Units assembled with door and sidelights have a continuous head and sill
33
BARNETT MILLWORKS, INC. | FIBERGLASS & STEEL DOOR INFORMATION
DOOR SPECIFICATIONS
INFINITY DOOR AND DOOR UNIT SPECIFICATIONS
Width:
Nominal Door Size
2-0
2-6
2-8
3-0
4-0 (pr.2-0)
5-0 (pr.2-6)
5-4 (pr.2-8)
Unit Outside of:
Actual Door Size
23 3/4”
29 3/4”
31 3/4”
35 3/4”
6-0 (pr.3-0)
3-0 (w/one 12” sidelite)
3-0 (w/two 12” sidelites-NO TRANSOM)
(w/ Rectangular Transom)
(w/ Elliptical Transom)
(w/ Half Round Transom)
NOTE: For Swing out Units Add 1/2” to outside of Brickmould Unit dimensions
Frame
25 7/16”
31 7/16”
33 7/16”
37 7/16”
50”
62”
66”
74”
51 1/16”
64 11/16”
64 11/16”
64 11/16”
64 11/16”
listed
Brickmould
27 15/16”
33 15/16”
35 15/16”
39 15/16”
52 1/2”
64 1/2”
68 1/2”
Rough Opening
26 7/16”
32 7/16”
34 7/16”
38 7/16”
51”
63”
67”
76
53
67
67
67
67
75”
52 1/16”
65 11/16”
65 11/16”
65 11/16”
65 11/16”
1/2”
9/16”
3/16”
3/16”
3/16”
3/16”
Height:
6-8 (Swing-In)
6-8 (Swing-Out)
6-8 (Swing-In)
(Swing-Out)
6-8 (Swing-In)
(Swing-Out)
6-8 (Swing-In)
(Swing-Out)
79 1/4”
79 1/4”
w/ 12” Rect. Transom by Barnett
same
w/ 16” ellip. Transom by Barnett
same
w/ 32 1/4” Half Rd. Transom by Barnett
same
82”
81 1/4”
95 5/8”
94 7/8”
98”
97 1/4”
114 1/4”
113 1/2”
83 1/4”
82 3/4”
96 7/8”
96 3/8”
99 1/4”
98 3/4”
115 1/2”
115”
82 1/2”
81 3/4”
96 1/8”
95 3/8”
98 1/2”
97 3/4”
114 3/4”
114”
99 1/4”
98 3/4”
112 7/8”
112 3/8”
115 1/4”
114 3/4”
131 1/2”
131”
98 1/2”
97 3/4”
112 1/8”
111 3/8”
114 1/2”
113 3/4”
130 3/4”
130”
8’ 0”INFINITY DOOR AND DOOR UNIT SPECIFICATIONS
Height:
8-0 (Swing-In)
8-0 (Swing-Out)
8-0 (Swing-In)
(Swing-Out)
8-0 (Swing-In)
(Swing-Out)
8-0 (Swing-In)
(Swing-Out)
34
95 1/4”
95 1/4”
w/ 12” Rect. Transom by Barnett
same
w/ 16” Ellip. Transom by Barnett
same
w/ 32 1/4” Half Rd. Transom by Barnett
same
98”
97 1/4”
111 5/8”
110 7/8”
114”
113 1/4”
130 1/4”
129 1/2”
BARNETT MILLWORKS, INC. | FIBERGLASS & STEEL DOOR INFORMATION
COMMITTED TO QUALITY
DOOR INFORMATION & ENTRANCE FRAMES
Aluminum Sill *with Vinyl
Adjustable Threshold
Four Finger Door
Bottom Sweep
7/8"
* Mill Finish or
anodized gold with
wood grain vinyl.
* Bronze Finish with
bronze vinyl.
5/8"
Weatherstripping
Schlegel Q-Lon compression weather
stripping hugs door to seal out drafts
and stop air filtration. It also protects
against high winds and heavy rains.
HANDING INFORMATION
INSWING
Left Hand
Exterior
Left Hand Inswing
Exterior
OUTSWING
Right Hand
Exterior
Right Hand Inswing
Exterior
Right Hand
Left Hand
Exterior
Right Hand Outswing
Exterior
Left Hand Outswing
Exterior
Exterior
All handing information above is viewed from outside the building.
BARNETT MILLWORKS, INC.
PROVIDING QUALITY AND DEPENDABILITY FOR OVER 60 YEARS.
35
2008 | ENTRY DOOR SYSTEMS
COMMITTED
TO QUALITY
BARNETT MILLWORKS,
INC.
Barnett Millworks is a wholesale manufacturer/distributor of millwork products serving retailers in Alabama, Mississippi, Louisiana and
Florida. We are located on Hamilton Boulevard, one mile east of Highway 90 in the Theodore Industrial Park, Theodore, Alabama. Our
facility encompasses eight acres under the roof including a 3000 square foot showroom. We represent the products of many major
manufacturers as well as our own standard and “custom” millwork items.
We maintain a millwork product showroom for our dealers and their customers. Our knowledgeable sales staff is available to offer assistance,
information and “list price” quotes to any visitors. The showroom is open from 9:00 am to 4:00 pm Monday through Friday.
Distributed by:
Because of continuing product development, Barnett Millworks, Inc. reserves the right to
make changes in design, materials, and specifications without notice. Please consult with
your Barnett Millworks, Inc. representative for details.
P.O. Box 389 Theodore Alabama 36590 (251) 443-7710
DOORGLASS