The TMC 660 (300kg) Has Arrived!

The TMC 660 (300kg) Has Arrived!
This Is The Ultimate Building Block And Your Users
Will Find Hundreds Of Ways To Use It!
Features And Benefits
 Over 660 lbs. of holding force on EVEN ¼” plate steel.
 Incredibly lightweight and easy to handle at just over two lbs.
 Easy actuation for rapid on/off control-handle locks on for safety—Lift the
Handle up slightly to release.
 M5 tapped holes on two sides and M6 on the top for custom attaching of user
designed accessories, handles, fences, strip cutting guides and more.
 Optional handle for conversion to hand lifter. OSHA friendly at up to 10:1 safe
working load when used at the maximum single person lift of 70lbs.
 Incredible shear force holding power for greater grip in vertical applications.
 Hardened steel base with TiN coating for long lasting flatness and fewer airgaps
caused by damage to the base.
 Ideal for plate levelling, platform building, fixturing and workholding of all types!
 Ultra compact magnetic field allows for welding as close as ½”. Care must be
taken not to overheat the magnet and a little anti-spatter goes a long way! Try this
with any other magnet!
 Available as an incredibly powerful Adjustable Angle workholder
 Available as a 220 lbs. lifting magnet for small parts moving and pulling parts off
of cutting tables
Revised October 15, 2015
TMC 660 (300kg) Spec Sheet
Revised October 15, 2015
TMC Options
The TMC Is Available In A Variety Of Configurations
As Well As Being Perfectly Designed For End User Customizing.
Ask About The Following Variations
TML 220 (100kg)
220 lb Lifting Magnet.
Includes 3:1 Safety Factor
Take It Off The Chain For Use Around The Shop!
TMH 66 (30kg) Includes Handle And Top Plate
66 lb Hand Lifter, Weighs Less Than 4 Lbs, Safely
Holds The OSHA Approved 70 lbs With up to
10:1 Safety Factor
TMA 660 (300kg)
Adjustable Angle Side Plates
Unbelievable Holding Power At Any Angle
Revised October 15, 2015
TMH
Dimensions and Information
The TMH HandLifter is the safest and only way to Carry, Drag, DeStack
and Position all your steel pieces.
 Over 660 lbs of holding force on ¼” steel for safe material handling.
 Up to 220 lbs of shear force for safe carrying even in vertical lifts.
 Easily pays for itself many times over in Time Saved, Gloves Band
Aids and E.R. visits lost.
 Temperature stable-Loses about 10% of holding force at 200°F . Not
rated for high temperature use. Take care not to allow excessive heat
to transfer to the magnet base. Magnets can be permanently damaged
by excessively high temperatures.
 Holds up to 450lbs on 1/8” and up to 165lbs even on 1/16” steel!
 NOT to be used as a “Below the Hook” lifting magnet. For Hand
Lifting only!
Revised October 15, 2015
TMH In-Use Images
Makes Match Cutting and
Match Drilling a Breeze!
Easily Pays For Itself In Only ONE Smashed Finger. Why Handle Heavy
Pieces Of Hot, Sharp And Stacked Steel With Your Hands?
Revised October 15, 2015
TMA 660 (300kg)
Dimensions and Information
 Incredible holding power of Over 660 lbs. per magnet for fabrication
well beyond what Red Arrowhead magnets can do!
 Ability to weld right up to the sides of the magnet housing without
Arc Deflection
 Fast and Easy adjustment with ratcheting handles for secure holding
force
 Able to hold securely even in shear or with a long moment arm
 Full magnetic holding force from as little as ¼” steel
 Perfect for square tube stock, plate, angle and channel
Revised October 15, 2015
TMA In-Use Images
Revised October 15, 2015
TML 220 (100kg)
Dimensions and Information
 Up to 220 lbs. of lifting capacity at ASME recommended 3:1 safety
factor
 Incredibly lightweight and easy to use/transport at only about 4 lbs.
 Full holding power on even ¼” thick steel
 Take it off the hook for use all around the shop!
 Swivel hook for easy positioning and control
 Extremely shallow magnetic field for easy destacking and
exceptional power on even thin metal
Revised October 15, 2015
TML In-Use Images
Revised October 15, 2015