Chevrolet Van Equipment Catalog

Transcription

2016 GM CATALOG
SORTIMOBYKNAPHEIDE.COM
844-EXXPAND
CITY EXPRESS | EXPRESS | SIERRA
Sortimo by Knapheide is a strategic partnership between Sortimo
International, a global leader in mobile storage solutions and The
Knapheide Manufacturing Company, the nation’s leading provider of
commercial vehicle solutions.
This partnership is focused on storage systems especially for
commercial vehicles.
Our ready-to-market product program is called EXXPAND.
EXXPAND is an easy way for our customers to organize their
vans and optimize their operations.
INTRODUCTION TO SORTIMO
2
TABLE OF CONTENTS
PROPAXX … ………………………………………………………………………8
CITY EXPRESS………………...………………………………………………………10
EXPRESS/SAVANA 135 WB…..……..……….……………….…………………12
EXPRESS/SAVANA 155 WB…….……………..……………….……….………14
PROTEXX PARTITIONS…………………………………….............…..…16
SMALL VANS…………………………….………………………………………………18
FULL SIZE VANS………………………………………………………………………19
SHELF STAXX & SHELF STAXX AXXESSORIES……………..…20
WIDE 2 SHELF STAXX……………………………………………………………22
WIDE 2 SHELF STAXX AXXESSORIES…….................................24
WIDE 4 SHELF STAXX……………………………………………………………28
WIDE 4 SHELF STAXX AXXESSORIES……….…………......…………30
WIDE 6 SHELF STAXX……………………………………………………………34
WIDE 6 SHELF STAXX AXXESSORIES……………………………………36
FREON TANK SHELF STAXX……………………..……………………………40
BOXXES……………………………………………………………………………42
S-BOXXES………………………………………………………………………………44
M-BOXXES………………………………………………………………………………46
LS-BOXXES……………………………………………………………………………52
I-BOXXES………………………………………………………………………………53
T-BOXXES………………………………………………………………………………54
END PANEL AXXESSORIES………………………………………………56
TABLE OF CONTENTS
L-BOXXES………………………………………………………………………………48
INTERIOR LADDER HOLDER……………………………………...……61
MAXX DRAWERS………………………………………………………………62
VAN DIMENSIONS............…………………………………………………63
3
GM AND SORTIMO BY
KNAPHEIDE
// SOLUTIONS DESIGNED FOR
YOU AND YOUR VAN
Congratulations on selecting a GM commercial van as your
next work vehicle. Your choice demonstrates that you place
importance in both quality and value. When considering what
to put in the cargo area of your new GM van, you shouldn’t
have to settle for standard shelving offerings. By exploring the
Sortimo By Knapheide portfolio of products, you are opening
the doors to wide range of intelligent solutions for your
individual requirements.
Rethink your approach to how you organize your van and
access your parts and tools. Sortimo By Knapheide offers
unique products with superior organization capabilities. Select
from predesigned, vocational solutions for your GM van from
our ProPaxx offerings or customize your vehicle with a wide
array of BOXXes and Axxessories to meet your individual
needs.
Please contact your local Sortimo By Knapheide distributor to
assist in developing a solution for you.
GM BUSINESS CHOICE
GM
4
Eligible commercial customers can receive upfit assistance from
GM on Sortimo By Knapheide upfit solutions with the purchase
or lease of any new Express, Savana, or City Express. Please
see your local GM dealer for details. Restrictions apply.
5
+
SORTING
All vehicle organization systems by nature
offer the user some level of organization.
Even a basic three shelf system offers
more organization than no shelving at all.
The density of organization and storage
of a Sortimo By Knapheide system makes
it the premier organization system in the
market today. Keeping your parts and
tools organized means less time spent
looking for items and the ability to easily
inventory them on the vehicle.
Having the right parts and tools, and being
able to find them when you want them,
results in improved worker efficiency.
&
MOBILITY
Other vehicle organization systems offer
limited mobility. This is where the Sortimo By
Knapheide system is unique to the market.
Mobility is made possible through the use of
BOXXes.
Sortimo by Knapheide has many different
types and sizes of BOXXes to meet your
organization needs. BOXXes are secured into
tracks on the shelves that hold them in place
when the vehicle is in motion.
Having the ability to remove the BOXXes
from the vehicle and take them with you to
the jobsite allows you to be organized inside
the vehicle and out.
FROM CURBSIDE TO WORKSITE
®
ORGANIZATION & MOBILITY
6
A SOLUTION FOR EVERYONE
EXXPAND
®
Sortimo By Knapheide’s program for ready-to-market products is called Exxpand. Exxpand is the easiest
way for our customers to organize their vans and optimize their operations. By utilizing our North American
warehouse and our nationwide network of distributors, we can quickly get any product within the Exxpand
program ready to ship and install, and ready for the end user to put it to work in their vehicle.
• Modular configurations of products allow for easy to configure solutions
• Predesigned packages based on vehicle configuration and vocation
• Products are ready to ship and ready to install
• Competitive pricing to meet the needs of the market
All of the products included within this catalog are part of the Exxpand program. For additional information
on our Exxpand product program, please visit the Sortimo By Knapheide website at sortimobyknapheide.
com and click on “Exxpand” under the “Products” section.
CUSTOM SOLUTIONS
• Ultimate flexibility in design allows for unlimited configurations
• Custom designed to meet the end user’s organization needs
• Consultative design approach
• Utilizes all Sortimo products to develop an individualized solution
For more information on custom solutions, please visit the Sortimo By Knapheide website at
sortimobyknapheide.com and click on “Custom” under the “Products” section. To initiate a custom
request, please call us at 844-EXXPAND.
EXXPAND VS CUSTOM SOLUTIONS
Sortimo By Knapheide also offers a custom design service where a design professional will work directly
with the distributor, dealer, or end customer to develop a cargo organization system that is customtailored to the way the end customer uses their vehicle. In a custom solution, all Sortimo products can
be utilized to develop a solution that best fits the needs of the customer. Since custom design solutions
are developed on an individual basis, they will typically be priced higher than an Exxpand solution and
will have a product lead time of 4-12 weeks. Thus, the custom path to vehicle organization should be
considered when an off-the-shelf solution with Exxpand is not available.
7
Packages designed
for your GM van.
PROPAXX
PROPAXX VOCATIONAL PACKAGES
ProPaxx vocational packages are a
great way to easily configure your
work van. Select the appropriate
base package and choose from
HVACR/Plumbing, Electrician or
General Service upgrade packages.
Be more productive by choosing an
organizational storage system for your
van that is designed around the work
you do.
• Pre-configured packages based on
the vehicle make/model and end
user vocation.
• ProPaxx packages are upgrades to
the existing base package in the
van.
• Easy to order, check-the-box
upgrade
• ProPaxx packages can be
ordered as a package or items
can be customized and ordered
individually.
8
9
PROPAXX
// CITY EXPRESS
1
2
2
Base Package
Package Weight: 146 lbs.
Item
Part Number
Description
Quantity
1
VA-BULK-NV
Protexx Partition with window
1
2
4460-1
Shelf Staxx, 4460-1
2
1
4
2
CITY EXPRESS
3
5
HVACR/Plumbing Upgrade - Part #: PP01H
Item
10
Part Number
Description
Quantity
1
4160TR-1
Freon Tank Rack Base Module - 3 Shelf
1
2
1000002647-KIT
Hook Strip
1
3
DR40-18
Door Kit 40-18
1
4
401002731-KIT
Divider Kit for Shelf Tray
3
5
6000001329-KIT
Storage Pocket Hard Plastic
1
2
6
1
3
4
7
5
Electrician Upgrade - Part #: PP01E
Item
Part Number
Description
Quantity
1
1000003428-KIT
Wire Spool Holder
3
2
401002731-KIT
3
3
51012128
T-BOXX Wide B
1
4
51012129
T-BOXX Wide C
1
5
6000000403
BOXX Slide
3
6
1000002647-KIT
Hook Strip
1
7
801015080-KIT
Multi-Functional Panel
1
5
1
3
4
6
General Service Upgrade - Part #: PP01G
Item
Part Number
Description
CITY EXPRESS
2
Quantity
1
801016054-KIT
Plastic Storage Pocket for Paper
1
2
121015565
L-BOXX 102 incl. Small Components Tray 8
1
3
1000001528
1
4
6000000403
BOXX Slide
3
5
401002731-KIT
3
6
1000002447-KIT
Big Storage Pocket
1
11
PROPAXX
// EXPRESS/SAVANA 135WB
1
3
2
2
Base Package
Item
Part Number
Description
Quantity
1
VA-BULK-GVAN
1
2
4460-1
Shelf Staxx, 4460-1
2
3
4460-2
Shelf Staxx, 4460-2
1
4
2
4
5
1
EXPRESS/SAVANA 135WB
3
6
7
Item
12
Part Number
Description
Quantity
1
1000002647-KIT
Hook Strip
1
2
4160TR-2
Freon Tank Rack Extension Module - 3 Shelf
1
3
DR40-18
Door Kit 40-18
1
4
401002731-KIT
6
5
41004663
M-BOXX Wide 24-9 G
2
6
6000000403
BOXX Slide
3
7
6000001329-KIT
1
2
2
3
4
1
8
6
7
9
5
Item
Part Number
Description
Quantity
1
1000003428-KIT
Wire Spool Holder
3
2
401002731-KIT
6
3
DW44-6
Drawer Kit 44-6
1
4
DIV44-6
Divider Kit for Drawer 44-6 (inside drawer)
1
5
6000000403
BOXX Slide
3
6
51012128
T-BOXX Wide B
1
7
51012129
T-BOXX Wide C
1
8
1000002647-KIT
Hook Strip
1
9
801015080-KIT
1
5
5
6
1
3
4
Item
2
7
Part Number
Description
Quantity
1
801016054-KIT
1
2
121015565
1
3
1000001528
1
4
6000000403
BOXX Slide
3
5
401002731-KIT
6
6
DR40-18
Door Kit 40-18
1
7
1000002447-KIT
Big Storage Pocket
1
13
PROPAXX
3
1
2
2
Base Package
Item
Part Number
Description
1
VA-BULK-GVAN
1
2
4660-1
Shelf Staxx, 4660-1
2
3
4460-2
Shelf Staxx, 4460-2
1
4
Quantity
4
2
5
1
6
3
7
Item
14
Part Number
Description
Quantity
1
1000002647-KIT
Hook Strip
1
2
4160TR-2
Freon Tank Rack Extension Module - 3 Shelf
1
3
LF60-18
Lift Flap Kit 60-18
1
4
401002731-KIT
8
5
41004663
M-BOXX Wide 24-9 G
2
6
6000000403
BOXX Slide
3
7
6000001329-KIT
1
2
2
3
4
1
9
5
6
7
10
8
Item
Part Number
Description
Quantity
1
1000003428-KIT
Wire Spool Holder
3
2
401002731-KIT
8
3
DW44-6
Drawer Kit 44-6
1
4
DIV44-6
Divider Kit for Drawer 44-6 (inside drawer)
1
5
51012127
T-BOXX Wide A
1
6
51012128
T-BOXX Wide B
1
7
51012129
T-BOXX Wide C
1
8
6000000403
BOXX Slide
4
9
1000002647-KIT
Hook Strip
1
10
801015080-KIT
1
6
6
7
1
5
8
Item
Part Number
Description
1
801016054-KIT
1
2
121015574
L-BOXX 102 incl. Inset Box Set H3
1
3
121015565
1
4
1000001528
1
5
6000000403
BOXX Slide
4
6
401002731-KIT
8
7
DR40-18
Door Kit 40-18
1
8
1000002447-KIT
Big Storage Pocket
1
2
4
3
Quantity
15
Protect the most
valuable asset in the
van...you.
PROTEXX
PARTITIONS
Protexx Partitions divide your work van into
two separate zones: the passenger area,
which doubles as a mobile office, and the
cargo area for storing parts and tools. In
the event of an unplanned stop, Protexx
Partitions offer an extra level of safety and
security. Partitions are contoured to fit
each van and conform to the B-pillar trim
and headliner in the van.
PROTEXX PARTITIONS
• Reduces the amount of noise in the
passenger area of the van coming
from items in the cargo area. This
creates a safer and more comfortable
environment for the driver.
• Heat or cool just the passenger area
rather than the entire van.
• Allows for full seat travel and a
reasonable amount of seat recline.
This is especially important for
driver comfort in smaller vans.
16
17
SMALL VAN PARTITIONS
Protexx Partitions are constructed of 1/4” ABS thermoplastic, which has mechanical properties of
impact resistance and toughness. Protexx Partitions are available with or without a window. The
window is constructed of 1/4” clear polycarbonate.
CITY EXPRESS ABS
PARTITION WITH WINDOW
Part #: VA-BULK-NV
Compatibility: Nissan NV200 / Chevy
City Express
Weight: 32 lbs.
SMALL VAN PARTITIONS
18
CITY EXPRESS ABS
PARTITION WITHOUT WINDOW
Part #: VA-BULK-NV-NG
Compatibility: Nissan NV200 / Chevy
City Express
Weight: 32 lbs.
FULL SIZE VAN PARTITIONS
Protexx Partitions are constructed of 1/4” ABS thermoplastic, which has mechanical properties of
impact resistance and toughness. Protexx Partitions are available with or without a window. The
window is constructed of 1/4” clear polycarbonate.
Part #: VA-BULK-GVAN
Compatibility: Chevy Express /
GMC Savanna
Weight: 40 lbs.
EXPRESS/SAVANNA ABS
PARITITION WITHOUT WINDOW
Part #: VA-BULK-GVAN-NG
Compatibility: Chevy Express /
GMC Savanna
Weight: 40 lbs.
FULL SIZE VAN PARTITIONS
EXPRESS/SAVANNA ABS
PARITITION WITH WINDOW
19
The first step towards
organization and
productivity.
SHELF STAXX & SHELF
STAXX AXXESSORIES
Shelf Staxx are a lightweight, durable van shelving
system that creates an organizational solution for
your van. The modular design allows for flexibility in
both configuration and layout. Shelf Staxx’s modern
appearance compliments both the current and new
generation of commercial vans.
SHELF STAXX & SHELF STAXX AXXESSORIES
• Lightweight – Fiberglass, pultruded end
panels have a very strong strength-to-weight
ratio and is the same process that is used to
make the ladder rails on fiberglass ladders.
Shelf Staxx are typically 25-30 percent
lighter than a traditional steel shelving unit
of comparable size.
• Modular – The modular design approach
allows for the ability to mix and match
different Shelf Staxx modules when
configuring your van. Shelf Staxx are
universal and are designed to work
across multiple van makes and models.
• Upgradable – All Shelf Staxx can
easily be upgraded with BOXXes,
Axxessories, or our pre-designed
vocational packages, which we call
ProPaxx.
20
21
WIDE 2 SHELF STAXX
SHELF STAXX 4260-1
Base module with (2) end panels
Part #: 4260-1
WxDxH: 21”x15”x41”
Weight: 32 lbs.
Includes:
• Two full size shelf trays
• Two strong, lightweight, pultruded end panels
• Stability Cross Brace
• EcoFix Mounting Kit
SHELF STAXX 4280-1
WIDE 2 SHELF STAXX
22
Part #: 4280-1
WxDxH: 21”x15”x55”
Weight: 38 lbs.
Includes:
• Three full size shelf trays
SHELF STAXX EXTENSION 4260-2
Extension module with (1) end panel
(Attaches to base module)
Part #: 4260-2
WxDxH: 20”x15”x41”
Weight: 26 lbs.
Includes:
• Two full size shelf trays
• One strong, lightweight, pultruded end panel
Part #: 4280-2
WxDxH: 20”x15”x55”
Weight: 32 lbs.
Includes:
• Three full size shelf trays
WIDE 2 SHELF STAXX
23
WIDE 2 SHELF STAXX
AXXESSORIES
DRAWER KIT 42-6
DIVIDER KIT FOR DRAWER 42-6
DRAWER KIT 42-10
Part #: DW42-6
Weight: 7 lbs.
4” high drawer for a 42 series Shelf Staxx
(42XX). Drawer is fully extendable and
has a load capacity of 175 lbs.
WIDE 2 SHELF STAXX AXXESSORIES
24
Part #: DW42-10
Weight: 10 lbs.
6.5” high drawer for a 2 series Shelf Staxx
(42XX). Drawer is fully extendable and
Part #: DIV42-6
Weight: 0.5 lbs.
Aluminum divider set for a 42-6 drawer.
Divider set includes one side-to-side
divider, two front to back dividers, and
connectors.
Part #: DIV42-10
Weight: 0.8 lbs.
Aluminum divider set for a 42-10 drawer.
Divider set includes one side to side
divider, two front-to-back dividers, and
connectors.
SHELF TRAY S42
STAXX SLIDE SS4
CABINET DOOR 24
CABINET DOOR 48
Part #: CD20-24
Weight: 9 lbs.
Cabinet Door Kit 24 includes a 16” tall
lockable door, key, a top and bottom panel,
and a back panel.
Part #: SS4
Weight: 0.5 lbs.
Slides for using L-BOXXes, M-BOXXes, and
T-BOXXes in Wide 2 Shelf Staxx. Slides
come in pairs and attach to the inside of
the Shelf Staxx end panels.
Part #: CD20-48
Weight: 14 lbs.
Cabinet Door Kit 48 includes a 32” tall
lockable door, key, a top and bottom panel,
an intermediate shelf, and a back panel.
Part #: 1000000382-KIT
Weight: 4 lbs.
Additional full size shelf tray for upgrading
a Wide 2 Shelf Staxx. Includes hardware
for mounting.
25
WIDE 2 SHELF STAXX
AXXESSORIES
WIDE 2 BACK PANEL
CABINET SHELF
DIVIDER FOR FULL SIZE
SHELF TRAY
DIVIDER FOR NARROW
SHELF TRAY
Part #: RPS20-20
Weight: 0.6 lbs.
Wide 2 Back panel is 20 Sortimeters
(13.3“) tall and encloses the back
of the shelving unit.
26
Part #: 401002731-KIT
Weight: 0.4 lbs.
Aluminum divers can be added
to full size shelf trays (depth 4)
to help further organize your
storage.
Part #: 1000003501-KIT
Weight: 3 lbs.
Additional cabinet shelf for
storage behind a cabinet door.
Part #: 401002730-KIT
Weight: 0.3 lbs.
Aluminum divers can be added to
narrow shelf trays (depth 3) to help
further organize your storage.
MULTISLIDE
Part #: MS24
Weight: 6 lbs.
Pull-out shelf for storing L-BOXXes
and T-BOXXes. Shelf can be fully
extended and the top lids of the
BOXXes can be opened to access
any contents inside.
27
WIDE 4 SHELF STAXX
SHELF STAXX 4460-1
Part #: 4460-1
WxDxH: 39.5”x15”x41”
Weight: 57 lbs.
Includes:
• One open shelf with (2) S-BOXXes, (2) Wide
S-BOXXes, and (5) BOXX slides
• Each S-BOXX includes one divider
• One upgradeable, open shelf with a removable lip
• One full size shelf tray
SHELF STAXX 4480-1
WIDE 4 SHELF STAXX
28
Part #: 4480-1
WxDxH: 39.5”x15”x55” Weight: 74 lbs.
Includes:
S-BOXXes and (5) BOXX slides
• Two upgradeable, open shelves with removable lips
Part #: 4460-2
WxDxH: 38.5”x15”x41”
Weight: 41 lbs.
Includes:
Part #: 4480-2
WxDxH: 38.5”x15”x55”
Weight: 60 lbs.
Includes:
• Three upgradeable, open shelves with removable lips
WIDE 4 SHELF STAXX
29
WIDE 4 SHELF STAXX
AXXESSORIES
DRAWER KIT 44-6
DRAWER KIT 44-10
Part #: DW44-6
Weight: 12 lbs.
4” High Drawer for a 44 series Shelf Staxx
(44XX). Drawer is fully expendable and
30
Part #: DW44-10
Weight: 15 lbs.
6.5” High Drawer for a 44 series Shelf Staxx
(44XX). Drawer is fully expendable and has
a load capacity of 175 lbs.
Part #: DIV44-6
Weight: 0.5 lbs.
Aluminum divider set for a 44-6 Drawer.
connectors.
Part #: DIV44-10
Weight: 0.8 lbs.
Aluminum divider set for a 44-10 Drawer.
connectors.
SHELF TRAY S44
UPGRADABLE SHELF S44
REMOVABLE LIP 4
BACK PANEL 4-20
DROP DOWN DOOR KIT 40-18
LIFT FLAP KIT 40-18
Part #: 1000000384-KIT
Weight: 8 lbs.
Wide 4 full size shelf tray for adding
additional functionality to a Shelf Staxx.
Dividers can be added to a Shelf Tray, but
must be purchased separately.
Part #: RPS40-20
Weight: 1.2 lbs.
Wide 4 Back panel is 20 Sortimeters
(13.3“) tall and encloses the back of the
shelving unit. Can be used in conjunction
with Lift Flaps and Drop Down Doors to
fully enclose these areas.
Part #: 1000002548-KIT
Weight: 1.5 lbs.
Wide 4 lip that attaches to the front of an
upgradeable shelf to aid in retaining items.
Part #: 1000000288-KIT
Weight: 8 lbs.
Wide 4 upgradeable shelf for adding
BOXXes or dividers can be added to an
upgradeable shelf, but must be purchased
separately.
Part #: DR40-18
Weight: 6.2 lbs.
Includes a hinged aluminum door that allows
for secure, enclosed storage for Shelf Staxx.
Door fits on 44series (44XX) Shelf Staxx.
Door includes a user-friendly handle and a
two point latch.
Part #: LF40-18
Weight: 12.2 lbs.
Lift flap kit for a 44 series Shelf Staxx
(44XX). Lift flap creates a secure storage
area on the floor below the bottom shelf.
It slides up and out of the way for easy
access to items stored in this location.
31
WIDE 4 SHELF STAXX
AXXESSORIES
DIVIDER FOR UPGRADEABLE
SHELF WITH LIP
Part #: 401010283-KIT
Weight: 0.4 lbs.
Aluminum dividers can be added to an
upgradeable shelf with removable lip to
help further organize your storage.
DIVIDER FOR NARROW
SHELF TRAY
Part #: 401002730-KIT
Weight: 0.3 lbs.
Aluminum dividers can be added
to narrow shelf trays (depth 3) to
Narrow shelves are standard on the
top shelf on 100 grid Shelf Staxx.
32
SHELF TRAY
Part #: 401002731-KIT
Weight: 0.4 lbs.
Aluminum dividers can be added to full
size shelf trays (depth 4) to help further
organize your storage.
FULL DEPTH LONG COMPONENT TRAY (DEPTH 4)
NARROW DEPTH LONG COMPONENT TRAY (DEPTH 3)
Part #: See chart below
Weight: See chart below
Two-piece, lightweight, composite tray with molded end caps for storing long items such as conduit.
Can be used with 60 and 80 grid, but will not utilize the full depth of the Shelf Staxx. Rear of tray
features a molded plastic end cap that opens to allow access to items by sliding them out of the back
of the van. Choose the size that will fit the street side configuration of Shelf Staxx in the van.
Part Number
Base Shelf Staxx
Extension Shelf Staxx
Length
Weight
LCP44
Wide 4
Wide 4
81.7”
13.9 LBS
LCP46
Wide 4
Wide 6
100.7”
16.6 LBS
LCP64
Wide 6
Wide 4
102.1”
16.6 LBS
LCP66
Wide 6
Wide 6
121.1”
19.3 LBS
Part #: 1000000625-KIT
Weight: 33.5 lbs.
This tray is a one-piece, full metal tray for storing long items such as conduit. Telescoping design that
goes from 63” to 122” is compatible with any combination of Shelf Staxx on the street side of the van.
These units require a Narrow Depth Long Component Tray (Depth 3). Rear of tray features a drop
down door to allow access to items by sliding the out of the back of the van. The door is secured
during transport by a rotational mechanical bar.
33
WIDE 6 SHELF STAXX
SHELF STAXX 4660-1
Part #: 4660-1
WxDxH: 58.5”x15”x41”
Weight: 74 lbs.
Includes:
S-BOXXes, and (7) BOXX slides
• One upgradeable, open shelf with a removable lip
SHELF STAXX 4680-1
WIDE 6 SHELF STAXX
34
Part #: 4680-1
WxDxH: 58.5”x15”x55” Weight: 89 lbs.
Includes:
S-BOXXes and (7) BOXX slides
Part #: 4660-2
WxDxH: 57.5”x15”x41”
Weight: 60 lbs.
Includes:
Part #: 4680-2
WxDxH: 57.5”x15”x54.5”
Weight: 74 lbs.
Includes:
• Three upgradeable, open shelves with
removable lips
WIDE 6 SHELF STAXX
35
WIDE 6 SHELF STAXX
AXXESSORIES
LIFT FLAP KIT 60-18
SHELF TRAY S46
UPGRADABLE SHELF S46
REMOVABLE LIP 6
Part #: LF60-18
Weight: 16.3 lbs.
Lift flap kit for a 46 series Shelf Staxx
(46XX). Lift flap creates a secure storage
area on the floor below the bottom shelf.
It slides up and out of the way for easy
access to items stored in this location.
(Removeable lip shown at bottom.)
36
Part #: 1000000290-KIT
Weight: 11 lbs.
Wide 6 upgradable shelf for adding
BOXXes and dividers can be added to an
upgradeable shelf, but must be purchased
separately.
Part #: 1000000386-KIT
Weight: 11 lbs.
Wide 6 full size shelf tray for adding
additional functionality to a Shelf
Staxx. Dividers can be added to a
Shelf Tray, but must be purchased
separately.
Part #: 1000002549-KIT
Weight: 2.2 lbs.
Wide 6 lip that attaches to the front of an
upgradeable shelf to aid in retaining items.
Part #: RPS60-20
Weight: 1.5 lbs.
Wide 4 Back Panel is 20 Sortimeters
(13.3”) tall and encloses the back of the
shelving unit. Can be used in conjuction
with Lift Flaps to fully enclose this area.
SHELF TRAY
Part #: 401002731-KIT
Weight: 0.4 lbs.
Aluminum dividers can be added to full size
shelf trays (depth 4) to help further organize
your storage.
DIVIDER FOR UPGRADEABLE
SHELF WITH LIP
Part #: 401010283-KIT
Weight: 0.4 lbs.
Aluminum dividers can be added to an
upgradeable shelf with removable lip to
DIVIDER FOR NARROW
SHELF TRAY
Part #: 401002730-KIT
Weight: 0.3 lbs.
Aluminum dividers can be added
to narrow shelf trays (depth 3)
to help further organize your
storage. Narrow shelves are
standard on the top shelf on 100
grid Shelf Staxx.
BACK PANEL 6-20
37
WIDE 6 SHELF STAXX
AXXESSORIES
FULL DEPTH LONG COMPONENT TRAY (DEPTH 4)
Part #: 1000000625-KIT
Weight: 33.5 lbs.
This tray is a one-piece, full metal tray for storing long items such as conduit. Telescoping design
that goes from 63” to 122” is compatible with any combination of Shelf Staxx on the street side of
the van. These units require a Narrow Depth Long Component Tray (Depth 3). Rear of tray features
a drop down door to allow access to items by sliding the out of the back of the van. The door is
secured during transport by a rotational mechanical bar.
38
NARROW DEPTH LONG COMPONENT TRAY (DEPTH 3)
Part #: See chart below
Weight: See chart below
Two-piece, lightweight, composite tray with molded end caps for storing long items such as conduit.
Can be used with 60 and 80 grid, but will not utilize the full depth of the Shelf Staxx. Rear of tray
features a molded plastic end cap that opens to allow access to items by sliding them out of the
back of the van. Choose the size that will fit the street side configuration of Shelf Staxx in the van.
Part Number
Base Shelf Staxx
Extension Shelf Staxx
Length
Weight
LCP44
Wide 4
Wide 4
81.7”
13.9 LBS
LCP46
Wide 4
Wide 6
100.7”
16.6 LBS
LCP64
Wide 6
Wide 4
102.1”
16.6 LBS
LCP66
Wide 6
Wide 6
121.1”
19.3 LBS
39
FREON TANK SHELF STAXX
FREON TANK SHELF STAXX 4160TR-1
Part #: 4160TR-1
WxDxH: 14.5”x15”x41”
Weight: 36 lbs.
Includes:
• Three shelves designed to hold either 30 lb. or 50 lb.
freon tanks
• One ProSafe lashing strap per shelf to secure the tanks
during transport
• Stability cross brace
• EcoFix mounting kit
EXTENSION 4160TR-2
Part #: 4160TR-2
WxDxH: 13.5”x15”x41”
Weight: 22 lbs.
Includes:
• Three shelves designed to hold either
• 30 lb. or 50 lb. freon tanks
• One ProSafe lashing strap per shelf to
secure the tanks during transport
• One strong, lightweight, pultruded
• end panel
ADD A SHELF TO YOUR
FREON TANK SHELF KIT
40
Part #: 1000003429-KIT
Weight: 4 lbs.
Freon Tank Shelf option for adding additional tank storage
to an existing freon tank shelf staxx. Includes ProSafe
lashing strap and hardware kit for mounting.
FREON TANK SHELF STAXX 4180TR-1
Part #: 4180TR-1
WxDxH: 14.5”x15”x55”
Weight: 49 lbs.
Includes:
• Four shelves designed to hold either 30 lb. or 50 lb.
freon tanks
• One ProSafe lashing strap per shelf to secure the tanks
during transport
Part #: 4180TR-2
WxDxH: 13.5”x15”x55”
Weight: 33 lbs.
Includes:
• Four shelves designed to hold either 30 lb.
or 50 lb. freon tanks
• One ProSafe lashing strap per shelf to
secure the tanks during transport
• One strong, lightweight, pultruded
• end panel
EXTENSION 4180TR-2
41
Never search for
that part again.
BOXXES
BOXXes help you organize your
equipment and transport it to your
worksite in the most efficient way
possible. BOXXes are the DNA of the
Sortimo By Knapheide system and
offer a truly unique solution for both
Organization and Mobility. Choose
from a variety of BOXXes to complete
your storage needs.
BOXXES
• Different styles of BOXXes are
available. Each style offers a
different level of organization and
mobility.
• BOXXes allow users to be
organized both on the vehicle as
well as off the vehicle.
• All BOXXes are interchangeable
and securely lock into Shelf Staxx
for safe transport.
42
43
S-BOXXES AND DIVIDERS
S-BOXXes are ideal holders for small components, spare parts and fastners. They
click into Exxpand Shelf Staxx to provide secure storage during transport. Dividers
are used to create storage separation within S-BOXXes. They lock into place
keeping all materials separated. Maximum of five dividers per S-BOXX.
S-BOXX STANDARD 04-9
Part #: 41003206
WxDxH: 5.91”x13.66”x6.02”
Weight: 1.3 lbs.
Optional dividers available.
BOXX will accept a maximum
of 5 dividers.
S-BOXXES
44
S-BOXX WIDE 04-9
Part #: 41012351
WxDxH: 11.81”x13.66”x6.02”
Weight: 2.1 lbs.
Optional dividers available.
BOXX will accept a maximum
of 5 dividers.
DIVIDER S-BOXX
Part #: 41003723
DIVIDER WIDE S-BOXX
Part #: 41012353
45
M-BOXXES AND DIVIDERS
M-BOXXes are ideal transport containers for bulk goods and serve as lightweight
drawers. M-BOXXes have handles so they are easy to take with you and they also click
into Exxpand Shelf Staxx to provide secure storage during transport. Add optional
dividers to create separate storage areas within the box. Maximum of two dividers per
box. Cross dividers and front and back dividers are not compatible within the same
M-BOXX
M-BOXX WIDE 24-9 G
Part #: 41004663
WxDxH: 17.52”x13.78”x6.02”
Weight: 2.9 lbs.
M-BOXXES
M-BOXX FRONT TO
BACK DIVIDER
Part #: 41003693
Sold individually.
46
M-BOXX CROSS DIVIDER
Part #: 41003690
Sold individually.
BOXX SLIDES
BOXX Slides hold BOXXes in place on Shelf Staxx during transport and enable BOXXes
to slide in and out like drawers.
Part #: 6000000403
STAXX SLIDE SS4
Part #: SS4
Weight: 0.5 lbs.
Slides for using L-BOXXes, M-BOXXes, and
T-BOXXes in wide 2 Shelf Staxx. Slides
come in pairs and attach to the inside of
the Shelf Staxx end panels.
BOXX SLIDES
BOXX Slide
47
L-BOXXES
The L-BOXX family is an intelligent solution for tradesmen and service professionals always
on the move. Each L-BOXX includes both a lid and a handle. They click in to Exxpand Shelf
Staxx as well as click together for easy transport.
L-BOXX 102
Part #: 121014674
WxDxH: 17.4”x14.06”x4.61”
Weight: 4.6 lbs.
L-BOXX 102 WITH
INSET BOX SET H3
L-BOXX 102 WITH SMALL
COMPONENTS TRAY 8
L-BOXX 102 WITH
TBS 3F DIVIDERS
L-BOXX 102 WITH
TBS 4F DIVIDERS
Part #: 121015574
WxDxH: 17.4”x14.06”x4.61”
Weight: 6.3 lbs.
Includes:
L-BOXX 102: 121014674
Inset Box Set: 51015299
Foam Lid Insert: 121014678
Part #: 121015565
WxDxH: 17.4”x14.06”x4.61”
Weight: 6.2 lbs.
Includes:
L-BOXX 102: 121014674
Component Tray: 121014901
L-BOXXES
L-BOXX 102 WITH FOAM
INLAY PRE-CUT
Part #: 121015576
WxDxH: 17.4”x14.06”x4.61”
Weight: 4.1 lbs.
Includes:
L-BOXX 102: 121014674
Foam Inlay: 121015281
48
Part #: 1000002938
WxDxH: 17.4”x14.06”x4.61”
Weight: 6.5 lbs.
Includes:
L-BOXX 102: 121014674
TBS 3F: 1000002933
Part #: 1000002939
WxDxH: 17.4”x14.06”x4.61”
Weight: 6.8 lbs.
Includes:
L-BOXX 102: 121014674
TBS 4F: 1000002934
L-BOXX 136
L-BOXX 136 WITH SMALL
COMPONENTS TRAY 8
Part #: 1000001528
WxDxH: 17.4”x14.06”x5.94”
Weight: 5.7 lbs.
Includes:
L-BOXX 136: 121014675
Component Tray: 600001195
L-BOXX 136 WITH
FOAM INLAY PRE-CUT
Part #: 121015577
WxDxH: 17.4”x14.06”x5.94”
Weight: 5.1 lbs.
Includes:
L-BOXX 136: 121014675
Foam Insert: 121015282
L-BOXXES
Part #: 121014675
WxDxH: 17.4”x14.06”x5.94”
Weight: 4.9 lbs.
L-BOXX 136 WITH
TBS 3F DIVIDERS
Part #: 1000002940
WxDxH: 17.4”x14.06”x5.94”
Weight: 7.1 lbs.
Includes:
L-BOXX 136: 121014675
TBS 3F: 1000002935
L-BOXX 136 WITH
TBS 4F DIVIDERS
Part #: 1000002941
WxDxH: 17.4”x14.06”x5.94”
Weight:7.5 lbs.
Includes:
L-BOXX 136: 121014675
TBS 4F: 1000002936
49
L-BOXXES
L-BOXX 238
Part #: 121014676
WxDxH: 17.4”x14.06”x9.96”
Weight: 6.2 lbs.
L-BOXXES
L-BOXX TROLLY
Part #: 121015412
WxDxH: 25.4”x19.4”x7.2”
Weight: 8.4 lbs.
Load Capacity: 220 lbs.
50
L-BOXX 238 THERMO
Part #: 121018337
WxDxH: 17.4”x14.06”x9.96”
Weight: 7.2 lbs.
Includes:
L-BOXX 238: 121014676
Thermo Insert: 121018345
L-BOXX 374
L-BOXX 374 THERMO
Part #: 121018338
WxDxH: 17.4”x14.06”x15.31”
Weight: 9.0 lbs.
Includes:
L-BOXX 374: 121014677
Thermo Insert: 121018346
L-BOXXES
Part #: 121014677
WxDxH: 17.4”x14.06”x15.31”
Weight: 7.5 lbs.
ALUCADDY FOLDABLE
Part #: 801014905
WxDxH (open): 19.3”x19.3”x42.9”
WxDxH (collapsed): 19.3”x 2.4”x 29.9”
Weight: 11.5 lbs.
51
LS-BOXXES
The L-BOXX family is an intelligent solution for tradesmen and service professionals always
on the move. Each L-BOXX includes both a lid and a handle. They click in to Exxpand Shelf
Staxx as well as click together for easy transport.
LS-BOXX 306 WITH
(2) I-BOXX 72 H3
LS-BOXX 306 WITH I-BOXX 53
C44 & LS DRAWER 92
LS-BOXX 306 WITH
(2) LS-DRAWERS 72
I-BOXX RACK 3 COMPARTMENTS
289 + LS-S TE
Part #: 6000000348
WxDxH: 17.4”x14.06”x12.64”
Weight: 14.3 lbs.
Part #: 6000000347
WxDxH: 17.4”x14.06”x12.64”
Weight: 12.1 lbs.
LS-BOXXES
Part #: 6000001327
WxDxH: 17.4”x14.06”x12.64”
Weight: 13.2 lbs.
52
Part #: 1000002476
WxDxH: 17.4”x13.5”x12.0”
Weight: 12.1 lbs.
I-BOXXES
I-BOXXes are storage solutions that can be used on their own, with an adapter plate or as
part of the LS-BOXX. They have a transparent lid so you can see what’s inside as well as
an integrated handle for easy access. I-BOXXes also include inset BOXXes to separate the
items that are being stored.
I-BOXX 72 H3
I-BOXX 53 C44
I-BOXX 53 FIRST AID
BOX DIN13164
I-BOXX ADAPTER PLATE
Part #: 6000000360
WxDxH: 12.44”x14.45”x2.09”
Weight: 2 lbs.
I-BOXXES
Part #: 6000000357
WxDxH: 12.44”x14.45”x2.83”
Weight: 3 lbs.
Part #: 1000001456
WxDxH: 12.44”x14.45”x2.83”
Weight: 3 lbs.
Part #: 6000001008-KIT
Secure I-BOXXes in place during
transport with the aid of the
I-BOXX adapter plate. Attaches to
the Shelf Staxx front or rear end
panels. I-BOXX sold separately.
53
T-BOXXES
T-BOXXes are practical plastic cases with a transparent lid for a clear view. They are
great for organizing small parts and pieces. T-BOXXes include a variety of inset box
sizes and click into Exxpand Shelf Staxx to provide secure storage during transport.
T-BOXX WIDE A
Part #: 51012127
WxDxH: 17.32”x13.78”x3.15”
Weight: 5.1 lbs.
T-BOXX WIDE B
Part #: 51012128
WxDxH: 17.32”x13.78”x3.15”
Weight: 5.1 lbs.
T-BOXXES
T-BOXX WIDE C
Part #: 51012129
WxDxH: 17.32”x13.78”x3.15”
Weight: 5.1 lbs.
54
T-BOXX WIDE D
Part #: 51012130
WxDxH: 17.32”x13.78”x3.15”
Weight: 5.1 lbs.
T-BOXX WIDE E
T-BOXX WIDE F
Part #: 51012132
WxDxH: 17.32”x13.78”x3.15”
Weight: 5.1 lbs.
T-BOXXES
Part #: 51012131
WxDxH: 17.32”x13.78”x3.15”
Weight: 5.1 lbs.
T-BOXX WIDE G
Part #: 51012133
WxDxH: 17.32”x13.78”x3.15”
Weight: 5.1 lbs.
T-BOXX WIDE H
Part #: 51011476
WxDxH: 17.32”x13.78”x3.15”
Weight: 5.1 lbs.
55
Make it all your own.
END PANEL
AXXESSORIES
Customize your storage space with
Axxessories to create a personalized
work environment that makes you
more productive. Axxessories have
a vocational focus and each one has
a specific function to make storage
solutions easy.
END PANEL AXXESSORIES
56
• Axxessories create additional
storage solutions by securing items
to end panels, shelves, etc.
• Dedicated solutions for storing
cables, tools, hoses, tanks, etc.
• Having the right tools and parts
easily accessible is a productivity
enhancer on the job site.
57
ALUMINUM WALL HOOK
CORD HOLDER
I-BOXX ADAPTER PLATE
HOSE HOLDER
Part #: 801012163-KIT
Weight: 0.2 lbs.
Universal wall hook attaches to
panels and can be used to hang
tools, coats, cords, etc.
58
Part #: 6000001008-KIT
Weight: 0.9 lbs.
Secure I-BOXXes in place during
transport with the aid of the
I-BOXX adapter plate. Attaches to
panels. I-BOXX sold separately.
Part #: 80713094
Weight: 0.3 lbs.
The cord holder is used to store
hoses and extension cords.
Constructed of heavy gauge wire
it has protective end caps and
hangs from the front edge of shelf
trays.
Part #: 801010976-KIT
Weight: 0.9 lbs.
Hose holders are made out of
plastic with a business card
pocket and address field. Hoses
or electrical cables are safely
stored away and quickly at hand.
Attaches to the Shelf Staxx front
or rear end panels.
STORAGE POCKET HARD PLASTIC
MULTI-FUNCTIONAL PANEL
PROSAFE LASHING RAIL
PROSAFE LASHING STRAP
PLASTIC STORAGE POCKET
FOR PAPER
BIG STORAGE POCKET 04-7
Part #: 1000000242-KIT
Weight: 0.7 lbs.
ProSafe Lashing Rails can be
attached to either the front or
rear end panels of Shelf Staxx.
Coupled with the ProSafe Lashing
strap it allows items to be secured
to the end panels.
Part #: 801016054-KIT
Weight: 1.4 lbs.
Document pockets are made of plastic
and attaches to the Shelf Staxx front
or rear end panels. Use it to keep
brochures, job documents, etc. in order
and easily accessible.
Part #: 801015080-KIT
Weight: 0.5 lbs.
The multi-functional panel has integrated
hooks and space for components such as
writing instruments and small tools. Attaches
to the Shelf Staxx front or rear end panels.
Part #: 1000000224
Weight: 0.5 lbs.
Use the ProSafe Lashing Strap in
conjunction with the ProSafe Lashing Rails
to secure items to the front or rear end
panels of Shelf Staxx. Lashing straps are
made out of 1” wide 100% polyester and
have a strain rating of 150 DaN. Strap
length is 55” and includes a clamp buckle.
Part #: 1000002447-KIT
Weight: 2.4 lbs.
The big storage pocket is made of
powder coated steel and attaches
to the Shelf Staxx end panels. It is
sized to hold larger items and has
loops on the side for storing hand
tools.
Part #: 6000001329-KIT
Weight: 0.9 lbs.
This storage pocket is made of tough
plastic and attaches to the Shelf Staxx
front or rear end panels. It is sized to store
aerosol cans and has loops on the front of
it for storing hand tools.
59
L-BOXX TROLLY
RETAINING PLATE L-BOXX TROLLY
ALUCADDY FOLDABLE
HOOK STRIP 04
Part #: 121015412
Weight: 8.4 lbs.
The practical, mobile platform for all
L-BOXXes. The BOXXes click easily onto
the frame. Made of plastic with four
casters, two of which can be locked.
Part #: 801014905
Weight: 11.5 lbs.
Collapsible aluminum caddy for
transporting L-BOXXes or bulky goods.
Has telescoping handle and two large
wheels with hard rubber tires.
TOOL STRIP 04-3
60
Part #: 1000003642-KIT
Weight: 0.5 lbs.
The tool strip is mounted onto the end
panel of a Shelf Staxx. Allows tools to be
securely stored during transport and also
quickly at hand for work.
Part #: 1000000729-KIT
Weight: 1.6 lbs.
The retaining plate attaches to a Shelf Staxx
end panel and provide a secure storage
place for the L-BOXX Trolly during transport.
Part #: 1000002647-KIT
Weight: 1.7 lbs.
The hook strip is mounted onto the
end panel of a Shelf Staxx and is ideal
for secure storage of jackets, cables,
hardhats, hoses, and other similar items.
Load capacity of 26 lbs.
WIRE SPOOL HOLDER
Part #: 1000003428-KIT
Weight: 1.7 lbs.
The wire spool holder is a convenient way
to store small spools of wire. It attaches
to the Shelf Staxx end panel and has an
easily removable cross bar to load spools.
It is sized to accept spools up to 6” in
diameter.
CABLE REEL SPOOL HOLDER
Part #: 1000003785-KIT
Weight: 1.6 lbs.
The cable reel holder is a convenient
way to store smaller sized reels of cable.
It attaches to the Shelf Staxx end panel
and has an easily removable cross bar to
load and unload reels. It is sized to accept
reels up to 12” wide and 14” in diameter.
INTERIOR LADDER HOLDER
INTERIOR LADDER HOLDER
Part #: 1000004569-KIT
Weight: 14 lbs.
Use an interior ladder holder to secure a ladder to the roof inside a van. The ladder holder is
ideal for step ladders that are 6’ in length, but is also adjustable for different lengths of ladders.
The ladder holder has a rung support that slides the length of the holder to make loading and
unloading the ladder easier. A gas prop is incorporated to secure the ladder while the vehicle is
in motion.
61
Easy access with
lots of storage.
MAXX DRAWERS
MAXX Drawers offer plenty of storage
space and are perfect for storing
heavy equipment or bulky materials
in the van. All MAXX drawers include
a large, ergonomic handle for easily
opening and closing of the drawer.
• Each drawer is mounted on 200 lb
rated telescopic slides to handle
the most demanding of loads
MAXX DRAWERS
62
• Locating these drawers close to
vehicle openings allows the user to
easily load and unload items into
the drawers without having to step
up into the van.
• MAXX Drawers are modular and
many solutions can be created by
either mounting the drawers side
by side or stacking them on top
of one another and choosing the
appropriate top plate or top shelf
for the application.
63
MAXX DRAWER MODULAR
SOLUTION PROCESS
STEP 1:
Choose a MAXX Drawer Unit
STEP 2:
Add more to create a stack
(optional)
STEP 3:
Add a ProSafe top cover plate
or a top cover shelf tray
MAXX DRAWERS
STEP 4:
Add optional drawer dividers,
top shelf dividers, or ProSafe
lashing straps
64
MAXX DRAWERS:
All drawers include a large, ergonomic
handle for easily opening and closing of
the drawer. Each drawer is rated at 200
lbs. capacity. Each drawer includes a
drawer liner and a mounting kit.
HEIGHT
LENGTH
WIDTH
Model
Description
Length (in) Width (in)
Height (in) Weight (lbs)
JD1.5-7-12-1
MAXX Drawer 1.5-7-12 1
26.8
14.6
9.8
31
JD1.5-10-12-1
MAXX Drawer 1.5-10-12-1
39.7
14.6
9.8
42
JD1.5-12-12-1
MAXX Drawer 1.5-12-12-1
47.3
14.6
9.8
57
JD2-7-12-1
MAXX Drawer 2-7-12-1
26.8
19.3
9.8
36
JD2-10-12-1
39.7
19.3
9.8
49
JD-2-12-12-1
47.3
19.3
9.8
58
MAXX DRAWER OPTIONS:
Part #: 411011700-KIT
Weight: 0.4 lbs.
Kit includes one aluminum divider and two divider
clips. Dividers go across the width of the drawer and
are adjustable front to back. Fits 14.6” wide drawers.
MAXX DRAWERS
MAXX DRAWER WIDE 1.5 DIVIDER KIT
MAXX DRAWER WIDE 2 DIVIDER KIT
Part #: 411003696-KIT
Weight: 0.6 lbs.
clips. Dividers go across the width of the drawer
and are adjustable front to back. Fits 19.3” wide
drawers.
65
MAXX DRAWER OPTIONS
MAXX TOP PLATE:
For applications requiring the securing
of bulk cargo to a loading floor, use a top
plate to finish off the MAXX Drawer. All top
plates are constructed of 3/8” Sobogrip
flooring with integrated ProSafe tie downs.
Top plates ending in -7 or -10 include six
ProSafe tie downs and those ending in
-12 include 9 ProSafe tie downs. ProSafe
lashing straps are not included, but are
available separately as an option.
LENGTH
WIDTH
Model
Description
Length (in) Width (in) Height (in)
Weight (lbs)
JDP1.5-7
MAXX Drawer Top Cover Plate 1.5-7
26.8
14.6
0.4
8
JDP1.5-10
MAXX Drawer Top Cover Shelf 1.5-10
39.7
14.6
0.4
12
JDP1.5-12
47.3
14.6
0.4
14
JDP2-7
MAXX Drawer Top Cover Shelf 2-7
26.8
19.3
0.4
11
JDP2-10
39.7
19.3
0.4
16
JDP2-12
47.3
19.3
0.4
19
MAXX TOP PLATE OPTIONS:
PROSAFE LASHING STRAP 55”
MAXX DRAWER OPTIONS
Part #: 1000000224
Weight: 0.5 lbs.
Use a ProSafe Lashing Strap to secure cargo using
the integrated Lashing Strap tie downs on the
MAXX Top Plate loading floor. Lashing straps are
made out of 1” wide 100% polyester and have a
strain rating of 150 DaN. Strap length is 55” and
includes a clamp buckle. Fits 14.6” wide drawers.
PROSAFE LASHING STRAP 117”
Part #: 1000000222
Weight: 0.8 lbs.
Use a ProSafe Lashing Strap to secure cargo using
the integrated Lashing Strap tie downs on the
MAXX Top Plate loading floor. Lashing straps are
made out of 1” wide 100% polyester and have a
strain rating of 150 DaN. Strap length is 117” and
includes a clamp buckle.
66
MAXX TOP SHELF:
For applications requiring additional storage
above the MAXX Drawer, use a top shelf to
finish off the MAXX Drawer. The top shelf is
constructed of steel and has a 5” lip around its
perimeter. The top shelf is designed to accept
cross dividers to subdivide up the area within
the shelf. Dividers are not standard, but are
available separately as an option.
LENGTH
WIDTH
Model
Description
Length (in) Width (in)
Height (in) Weight (lbs)
JDS1.5-7
26.8
14.6
4.9
8
JDS1.5-10
39.7
14.6
4.9
12
JDS1.5-12
47.3
14.6
4.9
14
JDS2-7
26.8
19.3
4.9
11
JDS2-10
39.7
19.3
4.9
16
JDS2-12
47.3
19.3
4.9
19
MAXX TOP SHELF OPTIONS:
Part #: 1000004844-KIT
Weight: 0.4 lbs.
Kit includes one aluminum divider and two divider clips.
Dividers go across the width of the shelf and are adjustable
front to back. Fits 14.6” wide shelves.
MAXX DRAWER TOP SHELF WIDE 2 DIVIDER
Part #: 1000004845-KIT
Weight: 0.6 lbs.
clips. Dividers go across the width of the shelf and are
adjustable front to back. Fits 19.3” wide shelves.
MAXX DRAWER OPTIONS
MAXX DRAWER TOP SHELF WIDE 1.5 DIVIDER
67
VAN DIMENSIONS
// CITY EXPRESS
52
INSIDE
ROOF
47
9
PARTITION
DEPTH
51
11
47
63
30
56
6
4
UNLESS OTHERWISE SPECIFIED
THE FOLLOWING TOLERANCES APPLY
PRECISION
0.12
0.06
0.03
2
PROPERTY OF KNAPHEIDE MFG.
CO, QUINCY, IL AND IS LOANED TO
THE RECIPIENT SUBJECT TO RETURN
UPON DEMAND. ITS CONTENTS ARE MATERIAL:
CONFIDENTIAL AND MUST NOT BE
COPIED OR SUBMITTED TO OUTSIDE
PARTIES FOR USE OR EXAMINATION.
VAN DIMENSIONS
68
DRAWN BY: A
DRAWING TITLE:
TOLERANCE
.X
.XX
.XXX
ANGLES
SIZE SHE
A 1
REFERENC
WEIGHT: (lbs)
PART NUMB
APRVD BY:
8
8
7
62
29
48
INSIDE
ROOF
6
PARTITION
DEPTH
56
73
48
AVAILABLE
SPACE
53
16
54
DOOR
OPENING
10
10
35
56.00
51
9
FLOOR
SPACE
PRECISION
0.12
0.06
0.03
2
SCALE:
APRVD DATE:
SIZE SHEET:
SCALE:
A 1 of 1 1:16
REFERENCE DRAWING:
PROPERTY OF KNAPHEIDE MFG.
CO, QUINCY, IL AND IS LOANED TO
THE RECIPIENT SUBJECT TO RETURN
UPON DEMAND. ITS CONTENTS ARE MATERIAL:
CONFIDENTIAL AND MUST NOT BE
COPIED OR SUBMITTED TO OUTSIDE
PARTIES FOR USE OR EXAMINATION.
APRVD DATE:
EET:
DRAWN BY: APRVD BY:
DRAWING TITLE:
TOLERANCE
.X
.XX
.XXX
ANGLES
PART NUMBER:
WEIGHT: (lbs)
ECO NO.
00000
1 of 1 1:16
CE DRAWING:
ECO NO.
00000
8
62
8
7
VAN DIMENSIONS
BER:
29
6
PARTITION
DEPTH
48
INSIDE
ROOF
56
48
54
AVAILABLE
DOOR
SPACE
OPENING
73
53
30
16
10
71
35
56.00
9
FLOOR
SPACE
69
PRECISION
.X
.XX
DRAWING TITLE:
DRAWN BY: APRVD BY:
APRVD DATE:
TOLERANCE
0.12
0.06
SIZE SHEET:
SCALE:
70
Installation Instructions
Installation Instructions for Sortimo By Knapheide Shelf Staxx and Protexx Partitions are
available at:
Warranty and Limitation of Liability
Sortimo By Knapheide warrants its van interior
equipment to be free from defects in material and
workmanship, under normal use and service for a
period of three years or 36,000 miles, whichever
occurs first, after the date of delivery to the original
retail purchaser, when installed by an authorized
3 YEAR/36,000 MILE
Sortimo By Knapheide Distributor and/or Sortimo By
Knapheide upfit facility. Products not installed by an
authorized Sortimo By Knapheide Distributor and/
or Sortimo By Knapheide upfit facility will not be
subject to any warranty whatsoever and ANY AND
ALL WARRANTIES WHATSOEVER RELATIVE TO SUCH SALES ARE HEREBY FULLY AND
EXPRESSLY DISCLAIMED. This warranty only provides for the following remedy: repairs
at the point of Sortimo By Knapheide’s main place of business or any of its Distributor
locations, or part replacements in part or in full to correct any defects related to material
and workmanship. This warranty does not apply to products not installed by an authorized
Sortimo By Knapheide Distributor and/or Sortimo By Knapheide upfit facility.
WARRANTY
WARRANTY
www.sortimo.knapheide.com/service-and-support/installation-instructions
71
VANDALIZED?
NOPE, DISORGANIZED.
Either way it’s a crime.
SBK GM CATALOG 2016
sortimobyknapheide.com
© Sortimo by Knapheide 2016

Chevrolet Van Equipment Catalog

Transcription

Similar documents

The Interior Colors

shelving units

(Brochure - Refurbished

Kit Alarm Applications

Floating Shelf - Woodpro Cabinetry

Softub T-220 - Softub of the Carolinas

K9 SUPERFUEL TM Human Grade Ingredients

Platforms - Optelian